1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22endif 23 24config STATIC_RELA 25 bool 26 default y if ARM64 && !POSITION_INDEPENDENT 27 28config DMA_ADDR_T_64BIT 29 bool 30 default y if ARM64 31 32config HAS_VBAR 33 bool 34 35config HAS_THUMB2 36 bool 37 38# Used for compatibility with asm files copied from the kernel 39config ARM_ASM_UNIFIED 40 bool 41 default y 42 43# Used for compatibility with asm files copied from the kernel 44config THUMB2_KERNEL 45 bool 46 47# If set, the workarounds for these ARM errata are applied early during U-Boot 48# startup. Note that in general these options force the workarounds to be 49# applied; no CPU-type/version detection exists, unlike the similar options in 50# the Linux kernel. Do not set these options unless they apply! Also note that 51# the following can be machine specific errata. These do have ability to 52# provide rudimentary version and machine specific checks, but expect no 53# product checks: 54# CONFIG_ARM_ERRATA_430973 55# CONFIG_ARM_ERRATA_454179 56# CONFIG_ARM_ERRATA_621766 57# CONFIG_ARM_ERRATA_798870 58# CONFIG_ARM_ERRATA_801819 59config ARM_ERRATA_430973 60 bool 61 62config ARM_ERRATA_454179 63 bool 64 65config ARM_ERRATA_621766 66 bool 67 68config ARM_ERRATA_716044 69 bool 70 71config ARM_ERRATA_725233 72 bool 73 74config ARM_ERRATA_742230 75 bool 76 77config ARM_ERRATA_743622 78 bool 79 80config ARM_ERRATA_751472 81 bool 82 83config ARM_ERRATA_761320 84 bool 85 86config ARM_ERRATA_773022 87 bool 88 89config ARM_ERRATA_774769 90 bool 91 92config ARM_ERRATA_794072 93 bool 94 95config ARM_ERRATA_798870 96 bool 97 98config ARM_ERRATA_801819 99 bool 100 101config ARM_ERRATA_826974 102 bool 103 104config ARM_ERRATA_828024 105 bool 106 107config ARM_ERRATA_829520 108 bool 109 110config ARM_ERRATA_833069 111 bool 112 113config ARM_ERRATA_833471 114 bool 115 116config ARM_ERRATA_845369 117 bool 118 119config ARM_ERRATA_852421 120 bool 121 122config ARM_ERRATA_852423 123 bool 124 125config ARM_ERRATA_855873 126 bool 127 128config CPU_ARM720T 129 bool 130 select SYS_CACHE_SHIFT_5 131 132config CPU_ARM920T 133 bool 134 select SYS_CACHE_SHIFT_5 135 136config CPU_ARM926EJS 137 bool 138 select SYS_CACHE_SHIFT_5 139 140config CPU_ARM946ES 141 bool 142 select SYS_CACHE_SHIFT_5 143 144config CPU_ARM1136 145 bool 146 select SYS_CACHE_SHIFT_5 147 148config CPU_ARM1176 149 bool 150 select HAS_VBAR 151 select SYS_CACHE_SHIFT_5 152 153config CPU_V7 154 bool 155 select HAS_VBAR 156 select HAS_THUMB2 157 select SYS_CACHE_SHIFT_6 158 159config CPU_V7M 160 bool 161 select HAS_THUMB2 162 select THUMB2_KERNEL 163 select SYS_CACHE_SHIFT_5 164 165config CPU_PXA 166 bool 167 select SYS_CACHE_SHIFT_5 168 169config CPU_SA1100 170 bool 171 select SYS_CACHE_SHIFT_5 172 173config SYS_CPU 174 default "arm720t" if CPU_ARM720T 175 default "arm920t" if CPU_ARM920T 176 default "arm926ejs" if CPU_ARM926EJS 177 default "arm946es" if CPU_ARM946ES 178 default "arm1136" if CPU_ARM1136 179 default "arm1176" if CPU_ARM1176 180 default "armv7" if CPU_V7 181 default "armv7m" if CPU_V7M 182 default "pxa" if CPU_PXA 183 default "sa1100" if CPU_SA1100 184 default "armv8" if ARM64 185 186config SYS_ARM_ARCH 187 int 188 default 4 if CPU_ARM720T 189 default 4 if CPU_ARM920T 190 default 5 if CPU_ARM926EJS 191 default 5 if CPU_ARM946ES 192 default 6 if CPU_ARM1136 193 default 6 if CPU_ARM1176 194 default 7 if CPU_V7 195 default 7 if CPU_V7M 196 default 5 if CPU_PXA 197 default 4 if CPU_SA1100 198 default 8 if ARM64 199 200config SYS_CACHE_SHIFT_5 201 bool 202 203config SYS_CACHE_SHIFT_6 204 bool 205 206config SYS_CACHE_SHIFT_7 207 bool 208 209config SYS_CACHELINE_SIZE 210 int 211 default 128 if SYS_CACHE_SHIFT_7 212 default 64 if SYS_CACHE_SHIFT_6 213 default 32 if SYS_CACHE_SHIFT_5 214 215config ARM_SMCCC 216 bool "Support for ARM SMC Calling Convention (SMCCC)" 217 depends on CPU_V7 || ARM64 218 select ARM_PSCI_FW 219 help 220 Say Y here if you want to enable ARM SMC Calling Convention. 221 This should be enabled if U-Boot needs to communicate with system 222 firmware (for example, PSCI) according to SMCCC. 223 224config SEMIHOSTING 225 bool "support boot from semihosting" 226 help 227 In emulated environments, semihosting is a way for 228 the hosted environment to call out to the emulator to 229 retrieve files from the host machine. 230 231config SYS_THUMB_BUILD 232 bool "Build U-Boot using the Thumb instruction set" 233 depends on !ARM64 234 help 235 Use this flag to build U-Boot using the Thumb instruction set for 236 ARM architectures. Thumb instruction set provides better code 237 density. For ARM architectures that support Thumb2 this flag will 238 result in Thumb2 code generated by GCC. 239 240config SPL_SYS_THUMB_BUILD 241 bool "Build SPL using the Thumb instruction set" 242 default y if SYS_THUMB_BUILD 243 depends on !ARM64 244 help 245 Use this flag to build SPL using the Thumb instruction set for 246 ARM architectures. Thumb instruction set provides better code 247 density. For ARM architectures that support Thumb2 this flag will 248 result in Thumb2 code generated by GCC. 249 250config SYS_L2CACHE_OFF 251 bool "L2cache off" 252 help 253 If SoC does not support L2CACHE or one do not want to enable 254 L2CACHE, choose this option. 255 256config ENABLE_ARM_SOC_BOOT0_HOOK 257 bool "prepare BOOT0 header" 258 help 259 If the SoC's BOOT0 requires a header area filled with (magic) 260 values, then choose this option, and create a define called 261 ARM_SOC_BOOT0_HOOK which contains the required assembler 262 preprocessor code. 263 264config ARM_CORTEX_CPU_IS_UP 265 bool 266 default n 267 268config USE_ARCH_MEMCPY 269 bool "Use an assembly optimized implementation of memcpy" 270 default y 271 depends on !ARM64 272 help 273 Enable the generation of an optimized version of memcpy. 274 Such implementation may be faster under some conditions 275 but may increase the binary size. 276 277config SPL_USE_ARCH_MEMCPY 278 bool "Use an assembly optimized implementation of memcpy for SPL" 279 default y if USE_ARCH_MEMCPY 280 depends on !ARM64 281 help 282 Enable the generation of an optimized version of memcpy. 283 Such implementation may be faster under some conditions 284 but may increase the binary size. 285 286config USE_ARCH_MEMSET 287 bool "Use an assembly optimized implementation of memset" 288 default y 289 depends on !ARM64 290 help 291 Enable the generation of an optimized version of memset. 292 Such implementation may be faster under some conditions 293 but may increase the binary size. 294 295config SPL_USE_ARCH_MEMSET 296 bool "Use an assembly optimized implementation of memset for SPL" 297 default y if USE_ARCH_MEMSET 298 depends on !ARM64 299 help 300 Enable the generation of an optimized version of memset. 301 Such implementation may be faster under some conditions 302 but may increase the binary size. 303 304config ARM64_SUPPORT_AARCH32 305 bool "ARM64 system support AArch32 execution state" 306 default y if ARM64 && !TARGET_THUNDERX_88XX 307 help 308 This ARM64 system supports AArch32 execution state. 309 310choice 311 prompt "Target select" 312 default TARGET_HIKEY 313 314config ARCH_AT91 315 bool "Atmel AT91" 316 select SPL_BOARD_INIT if SPL 317 318config TARGET_EDB93XX 319 bool "Support edb93xx" 320 select CPU_ARM920T 321 322config TARGET_ASPENITE 323 bool "Support aspenite" 324 select CPU_ARM926EJS 325 326config TARGET_GPLUGD 327 bool "Support gplugd" 328 select CPU_ARM926EJS 329 330config ARCH_DAVINCI 331 bool "TI DaVinci" 332 select CPU_ARM926EJS 333 imply CMD_SAVES 334 help 335 Support for TI's DaVinci platform. 336 337config KIRKWOOD 338 bool "Marvell Kirkwood" 339 select CPU_ARM926EJS 340 select BOARD_EARLY_INIT_F 341 select ARCH_MISC_INIT 342 343config ARCH_MVEBU 344 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 345 select OF_CONTROL 346 select OF_SEPARATE 347 select DM 348 select DM_ETH 349 select DM_SERIAL 350 select DM_SPI 351 select DM_SPI_FLASH 352 353config TARGET_DEVKIT3250 354 bool "Support devkit3250" 355 select CPU_ARM926EJS 356 select SUPPORT_SPL 357 358config TARGET_WORK_92105 359 bool "Support work_92105" 360 select CPU_ARM926EJS 361 select SUPPORT_SPL 362 363config TARGET_APF27 364 bool "Support apf27" 365 select CPU_ARM926EJS 366 select SUPPORT_SPL 367 368config TARGET_APX4DEVKIT 369 bool "Support apx4devkit" 370 select CPU_ARM926EJS 371 select SUPPORT_SPL 372 373config TARGET_XFI3 374 bool "Support xfi3" 375 select CPU_ARM926EJS 376 select SUPPORT_SPL 377 378config TARGET_M28EVK 379 bool "Support m28evk" 380 select CPU_ARM926EJS 381 select SUPPORT_SPL 382 383config TARGET_MX23EVK 384 bool "Support mx23evk" 385 select CPU_ARM926EJS 386 select SUPPORT_SPL 387 select BOARD_EARLY_INIT_F 388 389config TARGET_MX28EVK 390 bool "Support mx28evk" 391 select CPU_ARM926EJS 392 select SUPPORT_SPL 393 select BOARD_EARLY_INIT_F 394 395config TARGET_MX23_OLINUXINO 396 bool "Support mx23_olinuxino" 397 select CPU_ARM926EJS 398 select SUPPORT_SPL 399 select BOARD_EARLY_INIT_F 400 401config TARGET_BG0900 402 bool "Support bg0900" 403 select CPU_ARM926EJS 404 select SUPPORT_SPL 405 406config TARGET_SANSA_FUZE_PLUS 407 bool "Support sansa_fuze_plus" 408 select CPU_ARM926EJS 409 select SUPPORT_SPL 410 411config TARGET_SC_SPS_1 412 bool "Support sc_sps_1" 413 select CPU_ARM926EJS 414 select SUPPORT_SPL 415 416config ORION5X 417 bool "Marvell Orion" 418 select CPU_ARM926EJS 419 420config TARGET_SPEAR300 421 bool "Support spear300" 422 select CPU_ARM926EJS 423 select BOARD_EARLY_INIT_F 424 imply CMD_SAVES 425 426config TARGET_SPEAR310 427 bool "Support spear310" 428 select CPU_ARM926EJS 429 select BOARD_EARLY_INIT_F 430 imply CMD_SAVES 431 432config TARGET_SPEAR320 433 bool "Support spear320" 434 select CPU_ARM926EJS 435 select BOARD_EARLY_INIT_F 436 imply CMD_SAVES 437 438config TARGET_SPEAR600 439 bool "Support spear600" 440 select CPU_ARM926EJS 441 select BOARD_EARLY_INIT_F 442 imply CMD_SAVES 443 444config TARGET_STV0991 445 bool "Support stv0991" 446 select CPU_V7 447 select DM 448 select DM_SERIAL 449 select DM_SPI 450 select DM_SPI_FLASH 451 select SPI_FLASH 452 453config TARGET_X600 454 bool "Support x600" 455 select BOARD_LATE_INIT 456 select CPU_ARM926EJS 457 select SUPPORT_SPL 458 459config TARGET_IMX31_PHYCORE 460 bool "Support imx31_phycore_eet" 461 select CPU_ARM1136 462 select BOARD_EARLY_INIT_F 463 464config TARGET_IMX31_PHYCORE_EET 465 bool "Support imx31_phycore_eet" 466 select BOARD_LATE_INIT 467 select CPU_ARM1136 468 select BOARD_EARLY_INIT_F 469 470config TARGET_MX31ADS 471 bool "Support mx31ads" 472 select CPU_ARM1136 473 select BOARD_EARLY_INIT_F 474 475config TARGET_MX31PDK 476 bool "Support mx31pdk" 477 select BOARD_LATE_INIT 478 select CPU_ARM1136 479 select SUPPORT_SPL 480 select BOARD_EARLY_INIT_F 481 482config TARGET_WOODBURN 483 bool "Support woodburn" 484 select CPU_ARM1136 485 486config TARGET_WOODBURN_SD 487 bool "Support woodburn_sd" 488 select CPU_ARM1136 489 select SUPPORT_SPL 490 491config TARGET_FLEA3 492 bool "Support flea3" 493 select CPU_ARM1136 494 495config TARGET_MX35PDK 496 bool "Support mx35pdk" 497 select BOARD_LATE_INIT 498 select CPU_ARM1136 499 500config ARCH_BCM283X 501 bool "Broadcom BCM283X family" 502 select DM 503 select DM_SERIAL 504 select DM_GPIO 505 select OF_CONTROL 506 imply FAT_WRITE 507 508config TARGET_VEXPRESS_CA15_TC2 509 bool "Support vexpress_ca15_tc2" 510 select CPU_V7 511 select CPU_V7_HAS_NONSEC 512 select CPU_V7_HAS_VIRT 513 514config TARGET_VEXPRESS_CA5X2 515 bool "Support vexpress_ca5x2" 516 select CPU_V7 517 518config TARGET_VEXPRESS_CA9X4 519 bool "Support vexpress_ca9x4" 520 select CPU_V7 521 522config TARGET_BCM23550_W1D 523 bool "Support bcm23550_w1d" 524 select CPU_V7 525 imply CRC32_VERIFY 526 imply FAT_WRITE 527 528config TARGET_BCM28155_AP 529 bool "Support bcm28155_ap" 530 select CPU_V7 531 imply CRC32_VERIFY 532 imply FAT_WRITE 533 534config TARGET_BCMCYGNUS 535 bool "Support bcmcygnus" 536 select CPU_V7 537 imply CRC32_VERIFY 538 imply CMD_HASH 539 imply FAT_WRITE 540 imply HASH_VERIFY 541 imply NETDEVICES 542 imply BCM_SF2_ETH 543 imply BCM_SF2_ETH_GMAC 544 545config TARGET_BCMNSP 546 bool "Support bcmnsp" 547 select CPU_V7 548 549config TARGET_BCMNS2 550 bool "Support Broadcom Northstar2" 551 select ARM64 552 help 553 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 554 ARMv8 Cortex-A57 processors targeting a broad range of networking 555 applications 556 557config ARCH_EXYNOS 558 bool "Samsung EXYNOS" 559 select DM 560 select DM_I2C 561 select DM_SPI_FLASH 562 select DM_SERIAL 563 select DM_SPI 564 select DM_GPIO 565 select DM_KEYBOARD 566 imply FAT_WRITE 567 568config ARCH_S5PC1XX 569 bool "Samsung S5PC1XX" 570 select CPU_V7 571 select DM 572 select DM_SERIAL 573 select DM_GPIO 574 select DM_I2C 575 576config ARCH_HIGHBANK 577 bool "Calxeda Highbank" 578 select CPU_V7 579 580config ARCH_INTEGRATOR 581 bool "ARM Ltd. Integrator family" 582 select DM 583 select DM_SERIAL 584 585config ARCH_KEYSTONE 586 bool "TI Keystone" 587 select CPU_V7 588 select SUPPORT_SPL 589 select SYS_THUMB_BUILD 590 select CMD_POWEROFF 591 imply CMD_MTDPARTS 592 imply FIT 593 imply CMD_SAVES 594 595config ARCH_OMAP2PLUS 596 bool "TI OMAP2+" 597 select CPU_V7 598 select SPL_BOARD_INIT if SPL 599 select SPL_STACK_R if SPL 600 select SUPPORT_SPL 601 imply FIT 602 603config ARCH_MESON 604 bool "Amlogic Meson" 605 help 606 Support for the Meson SoC family developed by Amlogic Inc., 607 targeted at media players and tablet computers. We currently 608 support the S905 (GXBaby) 64-bit SoC. 609 610config ARCH_MX25 611 bool "NXP MX25" 612 select CPU_ARM926EJS 613 614config ARCH_MX7ULP 615 bool "NXP MX7ULP" 616 select CPU_V7 617 select ROM_UNIFIED_SECTIONS 618 619config ARCH_MX7 620 bool "Freescale MX7" 621 select CPU_V7 622 select SYS_FSL_HAS_SEC if SECURE_BOOT 623 select SYS_FSL_SEC_COMPAT_4 624 select SYS_FSL_SEC_LE 625 select BOARD_EARLY_INIT_F 626 select ARCH_MISC_INIT 627 628config ARCH_MX6 629 bool "Freescale MX6" 630 select CPU_V7 631 select SYS_FSL_HAS_SEC if SECURE_BOOT 632 select SYS_FSL_SEC_COMPAT_4 633 select SYS_FSL_SEC_LE 634 select SYS_THUMB_BUILD if SPL 635 636if ARCH_MX6 637config SPL_LDSCRIPT 638 default "arch/arm/mach-omap2/u-boot-spl.lds" 639endif 640 641config ARCH_MX5 642 bool "Freescale MX5" 643 select CPU_V7 644 select BOARD_EARLY_INIT_F 645 646config ARCH_QEMU 647 bool "QEMU Virtual Platform" 648 select CPU_V7 649 select ARCH_SUPPORT_PSCI 650 select DM 651 select DM_SERIAL 652 select OF_CONTROL 653 654config ARCH_RMOBILE 655 bool "Renesas ARM SoCs" 656 select DM 657 select DM_SERIAL 658 select BOARD_EARLY_INIT_F 659 imply FAT_WRITE 660 imply SYS_THUMB_BUILD 661 662config TARGET_S32V234EVB 663 bool "Support s32v234evb" 664 select ARM64 665 select SYS_FSL_ERRATUM_ESDHC111 666 667config ARCH_SNAPDRAGON 668 bool "Qualcomm Snapdragon SoCs" 669 select ARM64 670 select DM 671 select DM_GPIO 672 select DM_SERIAL 673 select SPMI 674 select OF_CONTROL 675 select OF_SEPARATE 676 677config ARCH_SOCFPGA 678 bool "Altera SOCFPGA family" 679 select CPU_V7 680 select SUPPORT_SPL 681 select OF_CONTROL 682 select SPL_OF_CONTROL 683 select DM 684 select DM_SPI_FLASH 685 select DM_SPI 686 select ENABLE_ARM_SOC_BOOT0_HOOK 687 select ARCH_EARLY_INIT_R 688 select ARCH_MISC_INIT 689 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 690 select SYS_THUMB_BUILD 691 imply CMD_MTDPARTS 692 imply CRC32_VERIFY 693 imply FAT_WRITE 694 695config ARCH_SUNXI 696 bool "Support sunxi (Allwinner) SoCs" 697 select BINMAN 698 select CMD_GPIO 699 select CMD_MMC if MMC 700 select CMD_USB if DISTRO_DEFAULTS 701 select DM 702 select DM_ETH 703 select DM_GPIO 704 select DM_KEYBOARD 705 select DM_SERIAL 706 select DM_USB if DISTRO_DEFAULTS 707 select OF_BOARD_SETUP 708 select OF_CONTROL 709 select OF_SEPARATE 710 select SPL_STACK_R if SPL 711 select SPL_SYS_MALLOC_SIMPLE if SPL 712 select SYS_NS16550 713 select SPL_SYS_THUMB_BUILD if !ARM64 714 select SYS_THUMB_BUILD if !ARM64 715 select USB if DISTRO_DEFAULTS 716 select USB_STORAGE if DISTRO_DEFAULTS 717 select USB_KEYBOARD if DISTRO_DEFAULTS 718 select USE_TINY_PRINTF 719 imply CMD_GPT 720 imply FAT_WRITE 721 imply PRE_CONSOLE_BUFFER 722 imply SPL_GPIO_SUPPORT 723 imply SPL_LIBCOMMON_SUPPORT 724 imply SPL_LIBDISK_SUPPORT 725 imply SPL_LIBGENERIC_SUPPORT 726 imply SPL_MMC_SUPPORT if MMC 727 imply SPL_POWER_SUPPORT 728 imply SPL_SERIAL_SUPPORT 729 imply USB_GADGET 730 731config TARGET_TS4600 732 bool "Support TS4600" 733 select CPU_ARM926EJS 734 select SUPPORT_SPL 735 736config ARCH_VF610 737 bool "Freescale Vybrid" 738 select CPU_V7 739 select SYS_FSL_ERRATUM_ESDHC111 740 imply CMD_MTDPARTS 741 imply NAND 742 743config ARCH_ZYNQ 744 bool "Xilinx Zynq based platform" 745 select BOARD_LATE_INIT 746 select CPU_V7 747 select SUPPORT_SPL 748 select OF_CONTROL 749 select SPL_BOARD_INIT if SPL 750 select SPL_OF_CONTROL if SPL 751 select DM 752 select DM_ETH 753 select DM_GPIO 754 select SPL_DM if SPL 755 select DM_MMC 756 select DM_SPI 757 select DM_SERIAL 758 select DM_SPI_FLASH 759 select SPL_SEPARATE_BSS if SPL 760 select DM_USB if USB 761 select BLK 762 select CLK 763 select SPL_CLK 764 select CLK_ZYNQ 765 imply CMD_CLK 766 imply FAT_WRITE 767 imply CMD_SPL 768 769config ARCH_ZYNQMP 770 bool "Xilinx ZynqMP based platform" 771 select ARM64 772 select BOARD_LATE_INIT 773 select DM 774 select OF_CONTROL 775 select DM_SERIAL 776 select SUPPORT_SPL 777 select CLK 778 select SPL_BOARD_INIT if SPL 779 select SPL_CLK if SPL 780 select DM_USB if USB 781 imply FAT_WRITE 782 783config TEGRA 784 bool "NVIDIA Tegra" 785 imply FAT_WRITE 786 787config TARGET_VEXPRESS64_AEMV8A 788 bool "Support vexpress_aemv8a" 789 select ARM64 790 791config TARGET_VEXPRESS64_BASE_FVP 792 bool "Support Versatile Express ARMv8a FVP BASE model" 793 select ARM64 794 select SEMIHOSTING 795 796config TARGET_VEXPRESS64_BASE_FVP_DRAM 797 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 798 select ARM64 799 help 800 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 801 the default config to allow the user to load the images directly into 802 DRAM using model parameters rather than by using semi-hosting to load 803 the files from the host filesystem. 804 805config TARGET_VEXPRESS64_JUNO 806 bool "Support Versatile Express Juno Development Platform" 807 select ARM64 808 809config TARGET_LS2080A_EMU 810 bool "Support ls2080a_emu" 811 select ARCH_LS2080A 812 select ARM64 813 select ARMV8_MULTIENTRY 814 select ARCH_MISC_INIT 815 help 816 Support for Freescale LS2080A_EMU platform 817 The LS2080A Development System (EMULATOR) is a pre silicon 818 development platform that supports the QorIQ LS2080A 819 Layerscape Architecture processor. 820 821config TARGET_LS2080A_SIMU 822 bool "Support ls2080a_simu" 823 select ARCH_LS2080A 824 select ARM64 825 select ARMV8_MULTIENTRY 826 select ARCH_MISC_INIT 827 help 828 Support for Freescale LS2080A_SIMU platform 829 The LS2080A Development System (QDS) is a pre silicon 830 development platform that supports the QorIQ LS2080A 831 Layerscape Architecture processor. 832 833config TARGET_LS1088AQDS 834 bool "Support ls1088aqds" 835 select ARCH_LS1088A 836 select ARM64 837 select ARMV8_MULTIENTRY 838 select ARCH_MISC_INIT 839 select BOARD_LATE_INIT 840 select SUPPORT_SPL 841 help 842 Support for NXP LS1088AQDS platform 843 The LS1088A Development System (QDS) is a high-performance 844 development platform that supports the QorIQ LS1088A 845 Layerscape Architecture processor. 846 847config TARGET_LS2080AQDS 848 bool "Support ls2080aqds" 849 select ARCH_LS2080A 850 select ARM64 851 select ARMV8_MULTIENTRY 852 select BOARD_LATE_INIT 853 select SUPPORT_SPL 854 select ARCH_MISC_INIT 855 imply SCSI 856 imply SCSI_AHCI 857 help 858 Support for Freescale LS2080AQDS platform 859 The LS2080A Development System (QDS) is a high-performance 860 development platform that supports the QorIQ LS2080A 861 Layerscape Architecture processor. 862 863config TARGET_LS2080ARDB 864 bool "Support ls2080ardb" 865 select ARCH_LS2080A 866 select ARM64 867 select ARMV8_MULTIENTRY 868 select BOARD_LATE_INIT 869 select SUPPORT_SPL 870 select ARCH_MISC_INIT 871 imply SCSI 872 imply SCSI_AHCI 873 help 874 Support for Freescale LS2080ARDB platform. 875 The LS2080A Reference design board (RDB) is a high-performance 876 development platform that supports the QorIQ LS2080A 877 Layerscape Architecture processor. 878 879config TARGET_LS2081ARDB 880 bool "Support ls2081ardb" 881 select ARCH_LS2080A 882 select ARM64 883 select ARMV8_MULTIENTRY 884 select BOARD_LATE_INIT 885 select SUPPORT_SPL 886 select ARCH_MISC_INIT 887 help 888 Support for Freescale LS2081ARDB platform. 889 The LS2081A Reference design board (RDB) is a high-performance 890 development platform that supports the QorIQ LS2081A/LS2041A 891 Layerscape Architecture processor. 892 893config TARGET_HIKEY 894 bool "Support HiKey 96boards Consumer Edition Platform" 895 select ARM64 896 select DM 897 select DM_GPIO 898 select DM_SERIAL 899 select OF_CONTROL 900 help 901 Support for HiKey 96boards platform. It features a HI6220 902 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 903 904config TARGET_POPLAR 905 bool "Support Poplar 96boards Enterprise Edition Platform" 906 select ARM64 907 select DM 908 select OF_CONTROL 909 select DM_SERIAL 910 select DM_USB 911 help 912 Support for Poplar 96boards EE platform. It features a HI3798cv200 913 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 914 making it capable of running any commercial set-top solution based on 915 Linux or Android. 916 917config TARGET_LS1012AQDS 918 bool "Support ls1012aqds" 919 select ARCH_LS1012A 920 select ARM64 921 select BOARD_LATE_INIT 922 help 923 Support for Freescale LS1012AQDS platform. 924 The LS1012A Development System (QDS) is a high-performance 925 development platform that supports the QorIQ LS1012A 926 Layerscape Architecture processor. 927 928config TARGET_LS1012ARDB 929 bool "Support ls1012ardb" 930 select ARCH_LS1012A 931 select ARM64 932 select BOARD_LATE_INIT 933 imply SCSI 934 imply SCSI_AHCI 935 help 936 Support for Freescale LS1012ARDB platform. 937 The LS1012A Reference design board (RDB) is a high-performance 938 development platform that supports the QorIQ LS1012A 939 Layerscape Architecture processor. 940 941config TARGET_LS1012AFRDM 942 bool "Support ls1012afrdm" 943 select ARCH_LS1012A 944 select ARM64 945 help 946 Support for Freescale LS1012AFRDM platform. 947 The LS1012A Freedom board (FRDM) is a high-performance 948 development platform that supports the QorIQ LS1012A 949 Layerscape Architecture processor. 950 951config TARGET_LS1088ARDB 952 bool "Support ls1088ardb" 953 select ARCH_LS1088A 954 select ARM64 955 select ARMV8_MULTIENTRY 956 select ARCH_MISC_INIT 957 select BOARD_LATE_INIT 958 select SUPPORT_SPL 959 help 960 Support for NXP LS1088ARDB platform. 961 The LS1088A Reference design board (RDB) is a high-performance 962 development platform that supports the QorIQ LS1088A 963 Layerscape Architecture processor. 964 965config TARGET_LS1021AQDS 966 bool "Support ls1021aqds" 967 select BOARD_LATE_INIT 968 select CPU_V7 969 select CPU_V7_HAS_NONSEC 970 select CPU_V7_HAS_VIRT 971 select SUPPORT_SPL 972 select ARCH_LS1021A 973 select ARCH_SUPPORT_PSCI 974 select LS1_DEEP_SLEEP 975 select SYS_FSL_DDR 976 select BOARD_EARLY_INIT_F 977 imply SCSI 978 979config TARGET_LS1021ATWR 980 bool "Support ls1021atwr" 981 select BOARD_LATE_INIT 982 select CPU_V7 983 select CPU_V7_HAS_NONSEC 984 select CPU_V7_HAS_VIRT 985 select SUPPORT_SPL 986 select ARCH_LS1021A 987 select ARCH_SUPPORT_PSCI 988 select LS1_DEEP_SLEEP 989 select BOARD_EARLY_INIT_F 990 imply SCSI 991 992config TARGET_LS1021AIOT 993 bool "Support ls1021aiot" 994 select BOARD_LATE_INIT 995 select CPU_V7 996 select CPU_V7_HAS_NONSEC 997 select CPU_V7_HAS_VIRT 998 select SUPPORT_SPL 999 select ARCH_LS1021A 1000 select ARCH_SUPPORT_PSCI 1001 imply SCSI 1002 help 1003 Support for Freescale LS1021AIOT platform. 1004 The LS1021A Freescale board (IOT) is a high-performance 1005 development platform that supports the QorIQ LS1021A 1006 Layerscape Architecture processor. 1007 1008config TARGET_LS1043AQDS 1009 bool "Support ls1043aqds" 1010 select ARCH_LS1043A 1011 select ARM64 1012 select ARMV8_MULTIENTRY 1013 select BOARD_LATE_INIT 1014 select SUPPORT_SPL 1015 select BOARD_EARLY_INIT_F 1016 imply SCSI 1017 help 1018 Support for Freescale LS1043AQDS platform. 1019 1020config TARGET_LS1043ARDB 1021 bool "Support ls1043ardb" 1022 select ARCH_LS1043A 1023 select ARM64 1024 select ARMV8_MULTIENTRY 1025 select BOARD_LATE_INIT 1026 select SUPPORT_SPL 1027 select BOARD_EARLY_INIT_F 1028 imply SCSI 1029 help 1030 Support for Freescale LS1043ARDB platform. 1031 1032config TARGET_LS1046AQDS 1033 bool "Support ls1046aqds" 1034 select ARCH_LS1046A 1035 select ARM64 1036 select ARMV8_MULTIENTRY 1037 select BOARD_LATE_INIT 1038 select SUPPORT_SPL 1039 select DM_SPI_FLASH if DM_SPI 1040 select BOARD_EARLY_INIT_F 1041 imply SCSI 1042 help 1043 Support for Freescale LS1046AQDS platform. 1044 The LS1046A Development System (QDS) is a high-performance 1045 development platform that supports the QorIQ LS1046A 1046 Layerscape Architecture processor. 1047 1048config TARGET_LS1046ARDB 1049 bool "Support ls1046ardb" 1050 select ARCH_LS1046A 1051 select ARM64 1052 select ARMV8_MULTIENTRY 1053 select BOARD_LATE_INIT 1054 select SUPPORT_SPL 1055 select DM_SPI_FLASH if DM_SPI 1056 select POWER_MC34VR500 1057 select BOARD_EARLY_INIT_F 1058 imply SCSI 1059 help 1060 Support for Freescale LS1046ARDB platform. 1061 The LS1046A Reference Design Board (RDB) is a high-performance 1062 development platform that supports the QorIQ LS1046A 1063 Layerscape Architecture processor. 1064 1065config TARGET_H2200 1066 bool "Support h2200" 1067 select CPU_PXA 1068 1069config TARGET_ZIPITZ2 1070 bool "Support zipitz2" 1071 select CPU_PXA 1072 1073config TARGET_COLIBRI_PXA270 1074 bool "Support colibri_pxa270" 1075 select CPU_PXA 1076 1077config ARCH_UNIPHIER 1078 bool "Socionext UniPhier SoCs" 1079 select BOARD_LATE_INIT 1080 select DM 1081 select DM_GPIO 1082 select DM_I2C 1083 select DM_MMC 1084 select DM_RESET 1085 select DM_SERIAL 1086 select DM_USB 1087 select OF_CONTROL 1088 select OF_LIBFDT 1089 select PINCTRL 1090 select SPL_BOARD_INIT if SPL 1091 select SPL_DM if SPL 1092 select SPL_LIBCOMMON_SUPPORT if SPL 1093 select SPL_LIBGENERIC_SUPPORT if SPL 1094 select SPL_OF_CONTROL if SPL 1095 select SPL_PINCTRL if SPL 1096 select SUPPORT_SPL 1097 imply FAT_WRITE 1098 help 1099 Support for UniPhier SoC family developed by Socionext Inc. 1100 (formerly, System LSI Business Division of Panasonic Corporation) 1101 1102config STM32 1103 bool "Support STM32" 1104 select CPU_V7M 1105 select DM 1106 select DM_SERIAL 1107 select SYS_THUMB_BUILD 1108 1109config ARCH_STI 1110 bool "Support STMicrolectronics SoCs" 1111 select CPU_V7 1112 select DM 1113 select DM_SERIAL 1114 select BLK 1115 select DM_MMC 1116 select DM_RESET 1117 help 1118 Support for STMicroelectronics STiH407/10 SoC family. 1119 This SoC is used on Linaro 96Board STiH410-B2260 1120 1121config ARCH_ROCKCHIP 1122 bool "Support Rockchip SoCs" 1123 select OF_CONTROL 1124 select BLK 1125 select DM 1126 select SPL_DM if SPL 1127 select SYS_MALLOC_F 1128 select SYS_THUMB_BUILD if !ARM64 1129 select SPL_SYS_MALLOC_SIMPLE if SPL 1130 select DM_GPIO 1131 select DM_I2C 1132 select DM_MMC 1133 select DM_SERIAL 1134 select DM_SPI 1135 select DM_SPI_FLASH 1136 select DM_USB if USB 1137 select DM_PWM 1138 select DM_REGULATOR 1139 select ENABLE_ARM_SOC_BOOT0_HOOK 1140 imply CMD_FASTBOOT 1141 imply FASTBOOT 1142 imply FAT_WRITE 1143 imply USB_FUNCTION_FASTBOOT 1144 imply SPL_SYSRESET 1145 imply TPL_SYSRESET 1146 imply ADC 1147 imply SARADC_ROCKCHIP 1148 1149config TARGET_THUNDERX_88XX 1150 bool "Support ThunderX 88xx" 1151 select ARM64 1152 select OF_CONTROL 1153 select SYS_CACHE_SHIFT_7 1154 1155config ARCH_ASPEED 1156 bool "Support Aspeed SoCs" 1157 select OF_CONTROL 1158 select DM 1159 1160endchoice 1161 1162source "arch/arm/mach-aspeed/Kconfig" 1163 1164source "arch/arm/mach-at91/Kconfig" 1165 1166source "arch/arm/mach-bcm283x/Kconfig" 1167 1168source "arch/arm/mach-davinci/Kconfig" 1169 1170source "arch/arm/mach-exynos/Kconfig" 1171 1172source "arch/arm/mach-highbank/Kconfig" 1173 1174source "arch/arm/mach-integrator/Kconfig" 1175 1176source "arch/arm/mach-keystone/Kconfig" 1177 1178source "arch/arm/mach-kirkwood/Kconfig" 1179 1180source "arch/arm/mach-mvebu/Kconfig" 1181 1182source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1183 1184source "arch/arm/mach-imx/mx2/Kconfig" 1185 1186source "arch/arm/mach-imx/mx7ulp/Kconfig" 1187 1188source "arch/arm/mach-imx/mx7/Kconfig" 1189 1190source "arch/arm/mach-imx/mx6/Kconfig" 1191 1192source "arch/arm/mach-imx/mx5/Kconfig" 1193 1194source "arch/arm/mach-omap2/Kconfig" 1195 1196source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1197 1198source "arch/arm/mach-orion5x/Kconfig" 1199 1200source "arch/arm/mach-rmobile/Kconfig" 1201 1202source "arch/arm/mach-meson/Kconfig" 1203 1204source "arch/arm/mach-qemu/Kconfig" 1205 1206source "arch/arm/mach-rockchip/Kconfig" 1207 1208source "arch/arm/mach-s5pc1xx/Kconfig" 1209 1210source "arch/arm/mach-snapdragon/Kconfig" 1211 1212source "arch/arm/mach-socfpga/Kconfig" 1213 1214source "arch/arm/mach-sti/Kconfig" 1215 1216source "arch/arm/mach-stm32/Kconfig" 1217 1218source "arch/arm/mach-sunxi/Kconfig" 1219 1220source "arch/arm/mach-tegra/Kconfig" 1221 1222source "arch/arm/mach-uniphier/Kconfig" 1223 1224source "arch/arm/cpu/armv7/vf610/Kconfig" 1225 1226source "arch/arm/mach-zynq/Kconfig" 1227 1228source "arch/arm/cpu/armv7/Kconfig" 1229 1230source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1231 1232source "arch/arm/cpu/armv8/Kconfig" 1233 1234source "arch/arm/mach-imx/Kconfig" 1235 1236source "board/aries/m28evk/Kconfig" 1237source "board/bosch/shc/Kconfig" 1238source "board/CarMediaLab/flea3/Kconfig" 1239source "board/Marvell/aspenite/Kconfig" 1240source "board/Marvell/gplugd/Kconfig" 1241source "board/armadeus/apf27/Kconfig" 1242source "board/armltd/vexpress/Kconfig" 1243source "board/armltd/vexpress64/Kconfig" 1244source "board/bluegiga/apx4devkit/Kconfig" 1245source "board/broadcom/bcm23550_w1d/Kconfig" 1246source "board/broadcom/bcm28155_ap/Kconfig" 1247source "board/broadcom/bcmcygnus/Kconfig" 1248source "board/broadcom/bcmnsp/Kconfig" 1249source "board/broadcom/bcmns2/Kconfig" 1250source "board/cavium/thunderx/Kconfig" 1251source "board/cirrus/edb93xx/Kconfig" 1252source "board/creative/xfi3/Kconfig" 1253source "board/freescale/ls2080a/Kconfig" 1254source "board/freescale/ls2080aqds/Kconfig" 1255source "board/freescale/ls2080ardb/Kconfig" 1256source "board/freescale/ls1088a/Kconfig" 1257source "board/freescale/ls1021aqds/Kconfig" 1258source "board/freescale/ls1043aqds/Kconfig" 1259source "board/freescale/ls1021atwr/Kconfig" 1260source "board/freescale/ls1021aiot/Kconfig" 1261source "board/freescale/ls1046aqds/Kconfig" 1262source "board/freescale/ls1043ardb/Kconfig" 1263source "board/freescale/ls1046ardb/Kconfig" 1264source "board/freescale/ls1012aqds/Kconfig" 1265source "board/freescale/ls1012ardb/Kconfig" 1266source "board/freescale/ls1012afrdm/Kconfig" 1267source "board/freescale/mx23evk/Kconfig" 1268source "board/freescale/mx28evk/Kconfig" 1269source "board/freescale/mx31ads/Kconfig" 1270source "board/freescale/mx31pdk/Kconfig" 1271source "board/freescale/mx35pdk/Kconfig" 1272source "board/freescale/s32v234evb/Kconfig" 1273source "board/gdsys/a38x/Kconfig" 1274source "board/grinn/chiliboard/Kconfig" 1275source "board/gumstix/pepper/Kconfig" 1276source "board/h2200/Kconfig" 1277source "board/hisilicon/hikey/Kconfig" 1278source "board/hisilicon/poplar/Kconfig" 1279source "board/imx31_phycore/Kconfig" 1280source "board/isee/igep003x/Kconfig" 1281source "board/olimex/mx23_olinuxino/Kconfig" 1282source "board/phytec/pcm051/Kconfig" 1283source "board/ppcag/bg0900/Kconfig" 1284source "board/sandisk/sansa_fuze_plus/Kconfig" 1285source "board/schulercontrol/sc_sps_1/Kconfig" 1286source "board/silica/pengwyn/Kconfig" 1287source "board/spear/spear300/Kconfig" 1288source "board/spear/spear310/Kconfig" 1289source "board/spear/spear320/Kconfig" 1290source "board/spear/spear600/Kconfig" 1291source "board/spear/x600/Kconfig" 1292source "board/st/stv0991/Kconfig" 1293source "board/tcl/sl50/Kconfig" 1294source "board/birdland/bav335x/Kconfig" 1295source "board/timll/devkit3250/Kconfig" 1296source "board/toradex/colibri_pxa270/Kconfig" 1297source "board/technologic/ts4600/Kconfig" 1298source "board/vscom/baltos/Kconfig" 1299source "board/woodburn/Kconfig" 1300source "board/work-microwave/work_92105/Kconfig" 1301source "board/zipitz2/Kconfig" 1302 1303source "arch/arm/Kconfig.debug" 1304 1305endmenu 1306 1307config SPL_LDSCRIPT 1308 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 1309 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1310 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1311 1312 1313