1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config ARCH_BCM6858 532 bool "Broadcom BCM6858 family" 533 select DM 534 select OF_CONTROL 535 imply CMD_DM 536 537config TARGET_VEXPRESS_CA15_TC2 538 bool "Support vexpress_ca15_tc2" 539 select CPU_V7A 540 select CPU_V7_HAS_NONSEC 541 select CPU_V7_HAS_VIRT 542 select PL011_SERIAL 543 544config ARCH_BCMSTB 545 bool "Broadcom BCM7XXX family" 546 select CPU_V7A 547 select DM 548 select OF_CONTROL 549 select OF_PRIOR_STAGE 550 imply CMD_DM 551 help 552 This enables support for Broadcom ARM-based set-top box 553 chipsets, including the 7445 family of chips. 554 555config TARGET_VEXPRESS_CA5X2 556 bool "Support vexpress_ca5x2" 557 select CPU_V7A 558 select PL011_SERIAL 559 560config TARGET_VEXPRESS_CA9X4 561 bool "Support vexpress_ca9x4" 562 select CPU_V7A 563 select PL011_SERIAL 564 565config TARGET_BCM23550_W1D 566 bool "Support bcm23550_w1d" 567 select CPU_V7A 568 imply CRC32_VERIFY 569 imply FAT_WRITE 570 571config TARGET_BCM28155_AP 572 bool "Support bcm28155_ap" 573 select CPU_V7A 574 imply CRC32_VERIFY 575 imply FAT_WRITE 576 577config TARGET_BCMCYGNUS 578 bool "Support bcmcygnus" 579 select CPU_V7A 580 imply BCM_SF2_ETH 581 imply BCM_SF2_ETH_GMAC 582 imply CMD_HASH 583 imply CRC32_VERIFY 584 imply FAT_WRITE 585 imply HASH_VERIFY 586 imply NETDEVICES 587 588config TARGET_BCMNSP 589 bool "Support bcmnsp" 590 select CPU_V7A 591 592config TARGET_BCMNS2 593 bool "Support Broadcom Northstar2" 594 select ARM64 595 help 596 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 597 ARMv8 Cortex-A57 processors targeting a broad range of networking 598 applications 599 600config ARCH_EXYNOS 601 bool "Samsung EXYNOS" 602 select DM 603 select DM_GPIO 604 select DM_I2C 605 select DM_KEYBOARD 606 select DM_SERIAL 607 select DM_SPI 608 select DM_SPI_FLASH 609 select SPI 610 imply SYS_THUMB_BUILD 611 imply CMD_DM 612 imply FAT_WRITE 613 614config ARCH_S5PC1XX 615 bool "Samsung S5PC1XX" 616 select CPU_V7A 617 select DM 618 select DM_GPIO 619 select DM_I2C 620 select DM_SERIAL 621 imply CMD_DM 622 623config ARCH_HIGHBANK 624 bool "Calxeda Highbank" 625 select CPU_V7A 626 select PL011_SERIAL 627 628config ARCH_INTEGRATOR 629 bool "ARM Ltd. Integrator family" 630 select DM 631 select DM_SERIAL 632 select PL01X_SERIAL 633 imply CMD_DM 634 635config ARCH_KEYSTONE 636 bool "TI Keystone" 637 select CMD_POWEROFF 638 select CPU_V7A 639 select SUPPORT_SPL 640 select SYS_ARCH_TIMER 641 select SYS_THUMB_BUILD 642 imply CMD_MTDPARTS 643 imply CMD_SAVES 644 imply FIT 645 646config ARCH_K3 647 bool "Texas Instruments' K3 Architecture" 648 select SPL 649 select SUPPORT_SPL 650 select FIT 651 652config ARCH_OMAP2PLUS 653 bool "TI OMAP2+" 654 select CPU_V7A 655 select SPL_BOARD_INIT if SPL 656 select SPL_STACK_R if SPL 657 select SUPPORT_SPL 658 imply FIT 659 660config ARCH_MESON 661 bool "Amlogic Meson" 662 imply DISTRO_DEFAULTS 663 help 664 Support for the Meson SoC family developed by Amlogic Inc., 665 targeted at media players and tablet computers. We currently 666 support the S905 (GXBaby) 64-bit SoC. 667 668config ARCH_MEDIATEK 669 bool "MediaTek SoCs" 670 select BINMAN 671 select DM 672 select OF_CONTROL 673 select SPL_DM if SPL 674 select SPL_LIBCOMMON_SUPPORT if SPL 675 select SPL_LIBGENERIC_SUPPORT if SPL 676 select SPL_OF_CONTROL if SPL 677 select SUPPORT_SPL 678 help 679 Support for the MediaTek SoCs family developed by MediaTek Inc. 680 Please refer to doc/README.mediatek for more information. 681 682config ARCH_LPC32XX 683 bool "NXP LPC32xx platform" 684 select CPU_ARM926EJS 685 select DM 686 select DM_GPIO 687 select DM_SERIAL 688 select SPL_DM if SPL 689 select SUPPORT_SPL 690 imply CMD_DM 691 692config ARCH_IMX8 693 bool "NXP i.MX8 platform" 694 select ARM64 695 select DM 696 select OF_CONTROL 697 698config ARCH_IMX8M 699 bool "NXP i.MX8M platform" 700 select ARM64 701 select DM 702 select SUPPORT_SPL 703 imply CMD_DM 704 705config ARCH_MX23 706 bool "NXP i.MX23 family" 707 select CPU_ARM926EJS 708 select PL011_SERIAL 709 select SUPPORT_SPL 710 711config ARCH_MX25 712 bool "NXP MX25" 713 select CPU_ARM926EJS 714 imply MXC_GPIO 715 716config ARCH_MX28 717 bool "NXP i.MX28 family" 718 select CPU_ARM926EJS 719 select PL011_SERIAL 720 select SUPPORT_SPL 721 722config ARCH_MX31 723 bool "NXP i.MX31 family" 724 select CPU_ARM1136 725 726config ARCH_MX7ULP 727 bool "NXP MX7ULP" 728 select CPU_V7A 729 select ROM_UNIFIED_SECTIONS 730 imply MXC_GPIO 731 732config ARCH_MX7 733 bool "Freescale MX7" 734 select ARCH_MISC_INIT 735 select BOARD_EARLY_INIT_F 736 select CPU_V7A 737 select SYS_FSL_HAS_SEC if SECURE_BOOT 738 select SYS_FSL_SEC_COMPAT_4 739 select SYS_FSL_SEC_LE 740 imply MXC_GPIO 741 742config ARCH_MX6 743 bool "Freescale MX6" 744 select CPU_V7A 745 select SYS_FSL_HAS_SEC if SECURE_BOOT 746 select SYS_FSL_SEC_COMPAT_4 747 select SYS_FSL_SEC_LE 748 select SYS_THUMB_BUILD if SPL 749 imply MXC_GPIO 750 751if ARCH_MX6 752config SPL_LDSCRIPT 753 default "arch/arm/mach-omap2/u-boot-spl.lds" 754endif 755 756config ARCH_MX5 757 bool "Freescale MX5" 758 select BOARD_EARLY_INIT_F 759 select CPU_V7A 760 imply MXC_GPIO 761 762config ARCH_OWL 763 bool "Actions Semi OWL SoCs" 764 select ARM64 765 select DM 766 select DM_SERIAL 767 select OF_CONTROL 768 imply CMD_DM 769 770config ARCH_QEMU 771 bool "QEMU Virtual Platform" 772 select DM 773 select DM_SERIAL 774 select OF_CONTROL 775 select PL01X_SERIAL 776 imply CMD_DM 777 imply DM_RTC 778 imply RTC_PL031 779 780config ARCH_RMOBILE 781 bool "Renesas ARM SoCs" 782 select BOARD_EARLY_INIT_F 783 select DM 784 select DM_SERIAL 785 imply CMD_DM 786 imply FAT_WRITE 787 imply SYS_THUMB_BUILD 788 imply ARCH_MISC_INIT if DISPLAY_CPUINFO 789 790config TARGET_S32V234EVB 791 bool "Support s32v234evb" 792 select ARM64 793 select SYS_FSL_ERRATUM_ESDHC111 794 795config ARCH_SNAPDRAGON 796 bool "Qualcomm Snapdragon SoCs" 797 select ARM64 798 select DM 799 select DM_GPIO 800 select DM_SERIAL 801 select MSM_SMEM 802 select OF_CONTROL 803 select OF_SEPARATE 804 select SMEM 805 select SPMI 806 imply CMD_DM 807 808config ARCH_SOCFPGA 809 bool "Altera SOCFPGA family" 810 select ARCH_EARLY_INIT_R 811 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 812 select ARM64 if TARGET_SOCFPGA_STRATIX10 813 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 814 select DM 815 select DM_SERIAL 816 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 817 select OF_CONTROL 818 select SPL_DM_RESET if DM_RESET 819 select SPL_DM_SERIAL 820 select SPL_LIBCOMMON_SUPPORT 821 select SPL_LIBGENERIC_SUPPORT 822 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 823 select SPL_OF_CONTROL 824 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 825 select SPL_SERIAL_SUPPORT 826 select SPL_WATCHDOG_SUPPORT 827 select SUPPORT_SPL 828 select SYS_NS16550 829 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 830 imply CMD_DM 831 imply CMD_MTDPARTS 832 imply CRC32_VERIFY 833 imply DM_SPI 834 imply DM_SPI_FLASH 835 imply FAT_WRITE 836 imply SPL_LIBDISK_SUPPORT 837 imply SPL_MMC_SUPPORT 838 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 839 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 840 imply SPL_SPI_FLASH_SUPPORT 841 imply SPL_SPI_SUPPORT 842 843config ARCH_SUNXI 844 bool "Support sunxi (Allwinner) SoCs" 845 select BINMAN 846 select CMD_GPIO 847 select CMD_MMC if MMC 848 select CMD_USB if DISTRO_DEFAULTS 849 select DM 850 select DM_ETH 851 select DM_GPIO 852 select DM_KEYBOARD 853 select DM_SERIAL 854 select DM_USB if DISTRO_DEFAULTS 855 select OF_BOARD_SETUP 856 select OF_CONTROL 857 select OF_SEPARATE 858 select SPECIFY_CONSOLE_INDEX 859 select SPL_STACK_R if SPL 860 select SPL_SYS_MALLOC_SIMPLE if SPL 861 select SPL_SYS_THUMB_BUILD if !ARM64 862 select SYS_NS16550 863 select SYS_THUMB_BUILD if !ARM64 864 select USB if DISTRO_DEFAULTS 865 select USB_KEYBOARD if DISTRO_DEFAULTS 866 select USB_STORAGE if DISTRO_DEFAULTS 867 select USE_TINY_PRINTF 868 imply CMD_DM 869 imply CMD_GPT 870 imply CMD_UBI if NAND 871 imply DISTRO_DEFAULTS 872 imply FAT_WRITE 873 imply FIT 874 imply OF_LIBFDT_OVERLAY 875 imply PRE_CONSOLE_BUFFER 876 imply SPL_GPIO_SUPPORT 877 imply SPL_LIBCOMMON_SUPPORT 878 imply SPL_LIBGENERIC_SUPPORT 879 imply SPL_MMC_SUPPORT if MMC 880 imply SPL_POWER_SUPPORT 881 imply SPL_SERIAL_SUPPORT 882 imply USB_GADGET 883 884config ARCH_VERSAL 885 bool "Support Xilinx Versal Platform" 886 select ARM64 887 select CLK 888 select DM 889 select DM_SERIAL 890 select OF_CONTROL 891 892config ARCH_VF610 893 bool "Freescale Vybrid" 894 select CPU_V7A 895 select SYS_FSL_ERRATUM_ESDHC111 896 imply CMD_MTDPARTS 897 imply NAND 898 899config ARCH_ZYNQ 900 bool "Xilinx Zynq based platform" 901 select BOARD_EARLY_INIT_F if WDT 902 select CLK 903 select CLK_ZYNQ 904 select CPU_V7A 905 select DM 906 select DM_ETH if NET 907 select DM_MMC if MMC 908 select DM_SERIAL 909 select DM_SPI 910 select DM_SPI_FLASH 911 select DM_USB if USB 912 select OF_CONTROL 913 select SPI 914 select SPL_BOARD_INIT if SPL 915 select SPL_CLK if SPL 916 select SPL_DM if SPL 917 select SPL_OF_CONTROL if SPL 918 select SPL_SEPARATE_BSS if SPL 919 select SUPPORT_SPL 920 imply ARCH_EARLY_INIT_R 921 imply BOARD_LATE_INIT 922 imply CMD_CLK 923 imply CMD_DM 924 imply CMD_SPL 925 imply FAT_WRITE 926 927config ARCH_ZYNQMP_R5 928 bool "Xilinx ZynqMP R5 based platform" 929 select CLK 930 select CPU_V7R 931 select DM 932 select DM_SERIAL 933 select OF_CONTROL 934 imply CMD_DM 935 imply DM_USB_GADGET 936 937config ARCH_ZYNQMP 938 bool "Xilinx ZynqMP based platform" 939 select ARM64 940 select CLK 941 select DM 942 select DM_SERIAL 943 select DM_USB if USB 944 select OF_CONTROL 945 select SPL_BOARD_INIT if SPL 946 select SPL_CLK if SPL 947 select SPL_SEPARATE_BSS if SPL 948 select SUPPORT_SPL 949 imply BOARD_LATE_INIT 950 imply CMD_DM 951 imply FAT_WRITE 952 imply MP 953 imply DM_USB_GADGET 954 955config TEGRA 956 bool "NVIDIA Tegra" 957 imply DISTRO_DEFAULTS 958 imply FAT_WRITE 959 960config TARGET_VEXPRESS64_AEMV8A 961 bool "Support vexpress_aemv8a" 962 select ARM64 963 select PL01X_SERIAL 964 965config TARGET_VEXPRESS64_BASE_FVP 966 bool "Support Versatile Express ARMv8a FVP BASE model" 967 select ARM64 968 select PL01X_SERIAL 969 select SEMIHOSTING 970 971config TARGET_VEXPRESS64_BASE_FVP_DRAM 972 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 973 select ARM64 974 select PL01X_SERIAL 975 help 976 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 977 the default config to allow the user to load the images directly into 978 DRAM using model parameters rather than by using semi-hosting to load 979 the files from the host filesystem. 980 981config TARGET_VEXPRESS64_JUNO 982 bool "Support Versatile Express Juno Development Platform" 983 select ARM64 984 select PL01X_SERIAL 985 986config TARGET_LS2080A_EMU 987 bool "Support ls2080a_emu" 988 select ARCH_LS2080A 989 select ARCH_MISC_INIT 990 select ARM64 991 select ARMV8_MULTIENTRY 992 help 993 Support for Freescale LS2080A_EMU platform 994 The LS2080A Development System (EMULATOR) is a pre silicon 995 development platform that supports the QorIQ LS2080A 996 Layerscape Architecture processor. 997 998config TARGET_LS2080A_SIMU 999 bool "Support ls2080a_simu" 1000 select ARCH_LS2080A 1001 select ARCH_MISC_INIT 1002 select ARM64 1003 select ARMV8_MULTIENTRY 1004 help 1005 Support for Freescale LS2080A_SIMU platform 1006 The LS2080A Development System (QDS) is a pre silicon 1007 development platform that supports the QorIQ LS2080A 1008 Layerscape Architecture processor. 1009 1010config TARGET_LS1088AQDS 1011 bool "Support ls1088aqds" 1012 select ARCH_LS1088A 1013 select ARCH_MISC_INIT 1014 select ARM64 1015 select ARMV8_MULTIENTRY 1016 select BOARD_LATE_INIT 1017 select SUPPORT_SPL 1018 help 1019 Support for NXP LS1088AQDS platform 1020 The LS1088A Development System (QDS) is a high-performance 1021 development platform that supports the QorIQ LS1088A 1022 Layerscape Architecture processor. 1023 1024config TARGET_LS2080AQDS 1025 bool "Support ls2080aqds" 1026 select ARCH_LS2080A 1027 select ARCH_MISC_INIT 1028 select ARM64 1029 select ARMV8_MULTIENTRY 1030 select BOARD_LATE_INIT 1031 select SUPPORT_SPL 1032 imply SCSI 1033 imply SCSI_AHCI 1034 help 1035 Support for Freescale LS2080AQDS platform 1036 The LS2080A Development System (QDS) is a high-performance 1037 development platform that supports the QorIQ LS2080A 1038 Layerscape Architecture processor. 1039 1040config TARGET_LS2080ARDB 1041 bool "Support ls2080ardb" 1042 select ARCH_LS2080A 1043 select ARCH_MISC_INIT 1044 select ARM64 1045 select ARMV8_MULTIENTRY 1046 select BOARD_LATE_INIT 1047 select SUPPORT_SPL 1048 imply SCSI 1049 imply SCSI_AHCI 1050 help 1051 Support for Freescale LS2080ARDB platform. 1052 The LS2080A Reference design board (RDB) is a high-performance 1053 development platform that supports the QorIQ LS2080A 1054 Layerscape Architecture processor. 1055 1056config TARGET_LS2081ARDB 1057 bool "Support ls2081ardb" 1058 select ARCH_LS2080A 1059 select ARCH_MISC_INIT 1060 select ARM64 1061 select ARMV8_MULTIENTRY 1062 select BOARD_LATE_INIT 1063 select SUPPORT_SPL 1064 help 1065 Support for Freescale LS2081ARDB platform. 1066 The LS2081A Reference design board (RDB) is a high-performance 1067 development platform that supports the QorIQ LS2081A/LS2041A 1068 Layerscape Architecture processor. 1069 1070config TARGET_HIKEY 1071 bool "Support HiKey 96boards Consumer Edition Platform" 1072 select ARM64 1073 select DM 1074 select DM_GPIO 1075 select DM_SERIAL 1076 select OF_CONTROL 1077 select PL01X_SERIAL 1078 select SPECIFY_CONSOLE_INDEX 1079 imply CMD_DM 1080 help 1081 Support for HiKey 96boards platform. It features a HI6220 1082 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1083 1084config TARGET_POPLAR 1085 bool "Support Poplar 96boards Enterprise Edition Platform" 1086 select ARM64 1087 select DM 1088 select DM_SERIAL 1089 select DM_USB 1090 select OF_CONTROL 1091 select PL01X_SERIAL 1092 imply CMD_DM 1093 help 1094 Support for Poplar 96boards EE platform. It features a HI3798cv200 1095 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1096 making it capable of running any commercial set-top solution based on 1097 Linux or Android. 1098 1099config TARGET_LS1012AQDS 1100 bool "Support ls1012aqds" 1101 select ARCH_LS1012A 1102 select ARM64 1103 select BOARD_LATE_INIT 1104 help 1105 Support for Freescale LS1012AQDS platform. 1106 The LS1012A Development System (QDS) is a high-performance 1107 development platform that supports the QorIQ LS1012A 1108 Layerscape Architecture processor. 1109 1110config TARGET_LS1012ARDB 1111 bool "Support ls1012ardb" 1112 select ARCH_LS1012A 1113 select ARM64 1114 select BOARD_LATE_INIT 1115 imply SCSI 1116 imply SCSI_AHCI 1117 help 1118 Support for Freescale LS1012ARDB platform. 1119 The LS1012A Reference design board (RDB) is a high-performance 1120 development platform that supports the QorIQ LS1012A 1121 Layerscape Architecture processor. 1122 1123config TARGET_LS1012A2G5RDB 1124 bool "Support ls1012a2g5rdb" 1125 select ARCH_LS1012A 1126 select ARM64 1127 select BOARD_LATE_INIT 1128 imply SCSI 1129 help 1130 Support for Freescale LS1012A2G5RDB platform. 1131 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1132 development platform that supports the QorIQ LS1012A 1133 Layerscape Architecture processor. 1134 1135config TARGET_LS1012AFRWY 1136 bool "Support ls1012afrwy" 1137 select ARCH_LS1012A 1138 select ARM64 1139 select BOARD_LATE_INIT 1140 imply SCSI 1141 imply SCSI_AHCI 1142 help 1143 Support for Freescale LS1012AFRWY platform. 1144 The LS1012A FRWY board (FRWY) is a high-performance 1145 development platform that supports the QorIQ LS1012A 1146 Layerscape Architecture processor. 1147 1148config TARGET_LS1012AFRDM 1149 bool "Support ls1012afrdm" 1150 select ARCH_LS1012A 1151 select ARM64 1152 help 1153 Support for Freescale LS1012AFRDM platform. 1154 The LS1012A Freedom board (FRDM) is a high-performance 1155 development platform that supports the QorIQ LS1012A 1156 Layerscape Architecture processor. 1157 1158config TARGET_LS1088ARDB 1159 bool "Support ls1088ardb" 1160 select ARCH_LS1088A 1161 select ARCH_MISC_INIT 1162 select ARM64 1163 select ARMV8_MULTIENTRY 1164 select BOARD_LATE_INIT 1165 select SUPPORT_SPL 1166 help 1167 Support for NXP LS1088ARDB platform. 1168 The LS1088A Reference design board (RDB) is a high-performance 1169 development platform that supports the QorIQ LS1088A 1170 Layerscape Architecture processor. 1171 1172config TARGET_LS1021AQDS 1173 bool "Support ls1021aqds" 1174 select ARCH_LS1021A 1175 select ARCH_SUPPORT_PSCI 1176 select BOARD_EARLY_INIT_F 1177 select BOARD_LATE_INIT 1178 select CPU_V7A 1179 select CPU_V7_HAS_NONSEC 1180 select CPU_V7_HAS_VIRT 1181 select LS1_DEEP_SLEEP 1182 select SUPPORT_SPL 1183 select SYS_FSL_DDR 1184 imply SCSI 1185 1186config TARGET_LS1021ATWR 1187 bool "Support ls1021atwr" 1188 select ARCH_LS1021A 1189 select ARCH_SUPPORT_PSCI 1190 select BOARD_EARLY_INIT_F 1191 select BOARD_LATE_INIT 1192 select CPU_V7A 1193 select CPU_V7_HAS_NONSEC 1194 select CPU_V7_HAS_VIRT 1195 select LS1_DEEP_SLEEP 1196 select SUPPORT_SPL 1197 imply SCSI 1198 1199config TARGET_LS1021AIOT 1200 bool "Support ls1021aiot" 1201 select ARCH_LS1021A 1202 select ARCH_SUPPORT_PSCI 1203 select BOARD_LATE_INIT 1204 select CPU_V7A 1205 select CPU_V7_HAS_NONSEC 1206 select CPU_V7_HAS_VIRT 1207 select SUPPORT_SPL 1208 imply SCSI 1209 help 1210 Support for Freescale LS1021AIOT platform. 1211 The LS1021A Freescale board (IOT) is a high-performance 1212 development platform that supports the QorIQ LS1021A 1213 Layerscape Architecture processor. 1214 1215config TARGET_LS1043AQDS 1216 bool "Support ls1043aqds" 1217 select ARCH_LS1043A 1218 select ARM64 1219 select ARMV8_MULTIENTRY 1220 select BOARD_EARLY_INIT_F 1221 select BOARD_LATE_INIT 1222 select SUPPORT_SPL 1223 imply SCSI 1224 help 1225 Support for Freescale LS1043AQDS platform. 1226 1227config TARGET_LS1043ARDB 1228 bool "Support ls1043ardb" 1229 select ARCH_LS1043A 1230 select ARM64 1231 select ARMV8_MULTIENTRY 1232 select BOARD_EARLY_INIT_F 1233 select BOARD_LATE_INIT 1234 select SUPPORT_SPL 1235 imply SCSI 1236 help 1237 Support for Freescale LS1043ARDB platform. 1238 1239config TARGET_LS1046AQDS 1240 bool "Support ls1046aqds" 1241 select ARCH_LS1046A 1242 select ARM64 1243 select ARMV8_MULTIENTRY 1244 select BOARD_EARLY_INIT_F 1245 select BOARD_LATE_INIT 1246 select DM_SPI_FLASH if DM_SPI 1247 select SUPPORT_SPL 1248 imply SCSI 1249 help 1250 Support for Freescale LS1046AQDS platform. 1251 The LS1046A Development System (QDS) is a high-performance 1252 development platform that supports the QorIQ LS1046A 1253 Layerscape Architecture processor. 1254 1255config TARGET_LS1046ARDB 1256 bool "Support ls1046ardb" 1257 select ARCH_LS1046A 1258 select ARM64 1259 select ARMV8_MULTIENTRY 1260 select BOARD_EARLY_INIT_F 1261 select BOARD_LATE_INIT 1262 select DM_SPI_FLASH if DM_SPI 1263 select POWER_MC34VR500 1264 select SUPPORT_SPL 1265 imply SCSI 1266 help 1267 Support for Freescale LS1046ARDB platform. 1268 The LS1046A Reference Design Board (RDB) is a high-performance 1269 development platform that supports the QorIQ LS1046A 1270 Layerscape Architecture processor. 1271 1272config TARGET_H2200 1273 bool "Support h2200" 1274 select CPU_PXA 1275 1276config TARGET_ZIPITZ2 1277 bool "Support zipitz2" 1278 select CPU_PXA 1279 1280config TARGET_COLIBRI_PXA270 1281 bool "Support colibri_pxa270" 1282 select CPU_PXA 1283 1284config ARCH_UNIPHIER 1285 bool "Socionext UniPhier SoCs" 1286 select BOARD_LATE_INIT 1287 select DM 1288 select DM_GPIO 1289 select DM_I2C 1290 select DM_MMC 1291 select DM_RESET 1292 select DM_SERIAL 1293 select DM_USB 1294 select OF_BOARD_SETUP 1295 select OF_CONTROL 1296 select OF_LIBFDT 1297 select PINCTRL 1298 select SPL_BOARD_INIT if SPL 1299 select SPL_DM if SPL 1300 select SPL_LIBCOMMON_SUPPORT if SPL 1301 select SPL_LIBGENERIC_SUPPORT if SPL 1302 select SPL_OF_CONTROL if SPL 1303 select SPL_PINCTRL if SPL 1304 select SUPPORT_SPL 1305 imply CMD_DM 1306 imply DISTRO_DEFAULTS 1307 imply FAT_WRITE 1308 help 1309 Support for UniPhier SoC family developed by Socionext Inc. 1310 (formerly, System LSI Business Division of Panasonic Corporation) 1311 1312config STM32 1313 bool "Support STMicroelectronics STM32 MCU with cortex M" 1314 select CPU_V7M 1315 select DM 1316 select DM_SERIAL 1317 imply CMD_DM 1318 1319config ARCH_STI 1320 bool "Support STMicrolectronics SoCs" 1321 select BLK 1322 select CPU_V7A 1323 select DM 1324 select DM_MMC 1325 select DM_RESET 1326 select DM_SERIAL 1327 imply CMD_DM 1328 help 1329 Support for STMicroelectronics STiH407/10 SoC family. 1330 This SoC is used on Linaro 96Board STiH410-B2260 1331 1332config ARCH_STM32MP 1333 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1334 select ARCH_MISC_INIT 1335 select BOARD_LATE_INIT 1336 select CLK 1337 select DM 1338 select DM_GPIO 1339 select DM_RESET 1340 select DM_SERIAL 1341 select MISC 1342 select OF_CONTROL 1343 select OF_LIBFDT 1344 select PINCTRL 1345 select REGMAP 1346 select SUPPORT_SPL 1347 select SYSCON 1348 select SYSRESET 1349 select SYS_THUMB_BUILD 1350 imply CMD_DM 1351 help 1352 Support for STM32MP SoC family developed by STMicroelectronics, 1353 MPUs based on ARM cortex A core 1354 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1355 BootLoader (FSBL) 1356 1357config ARCH_ROCKCHIP 1358 bool "Support Rockchip SoCs" 1359 select BLK 1360 select DM 1361 select DM_GPIO 1362 select DM_I2C 1363 select DM_MMC 1364 select DM_PWM 1365 select DM_REGULATOR 1366 select DM_SERIAL 1367 select DM_SPI 1368 select DM_SPI_FLASH 1369 select DM_USB if USB 1370 select ENABLE_ARM_SOC_BOOT0_HOOK 1371 select OF_CONTROL 1372 select SPI 1373 select SPL_DM if SPL 1374 select SPL_SYS_MALLOC_SIMPLE if SPL 1375 select SYS_MALLOC_F 1376 select SYS_THUMB_BUILD if !ARM64 1377 imply ADC 1378 imply CMD_DM 1379 imply DISTRO_DEFAULTS 1380 imply FAT_WRITE 1381 imply SARADC_ROCKCHIP 1382 imply SPL_SYSRESET 1383 imply SYS_NS16550 1384 imply TPL_SYSRESET 1385 imply USB_FUNCTION_FASTBOOT 1386 1387config TARGET_THUNDERX_88XX 1388 bool "Support ThunderX 88xx" 1389 select ARM64 1390 select OF_CONTROL 1391 select PL01X_SERIAL 1392 select SYS_CACHE_SHIFT_7 1393 1394config ARCH_ASPEED 1395 bool "Support Aspeed SoCs" 1396 select DM 1397 select OF_CONTROL 1398 imply CMD_DM 1399 1400endchoice 1401 1402config TI_SECURE_DEVICE 1403 bool "HS Device Type Support" 1404 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1405 help 1406 If a high secure (HS) device type is being used, this config 1407 must be set. This option impacts various aspects of the 1408 build system (to create signed boot images that can be 1409 authenticated) and the code. See the doc/README.ti-secure 1410 file for further details. 1411 1412source "arch/arm/mach-aspeed/Kconfig" 1413 1414source "arch/arm/mach-at91/Kconfig" 1415 1416source "arch/arm/mach-bcm283x/Kconfig" 1417 1418source "arch/arm/mach-bcmstb/Kconfig" 1419 1420source "arch/arm/mach-davinci/Kconfig" 1421 1422source "arch/arm/mach-exynos/Kconfig" 1423 1424source "arch/arm/mach-highbank/Kconfig" 1425 1426source "arch/arm/mach-integrator/Kconfig" 1427 1428source "arch/arm/mach-k3/Kconfig" 1429 1430source "arch/arm/mach-keystone/Kconfig" 1431 1432source "arch/arm/mach-kirkwood/Kconfig" 1433 1434source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1435 1436source "arch/arm/mach-mvebu/Kconfig" 1437 1438source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1439 1440source "arch/arm/mach-imx/mx2/Kconfig" 1441 1442source "arch/arm/mach-imx/mx3/Kconfig" 1443 1444source "arch/arm/mach-imx/mx5/Kconfig" 1445 1446source "arch/arm/mach-imx/mx6/Kconfig" 1447 1448source "arch/arm/mach-imx/mx7/Kconfig" 1449 1450source "arch/arm/mach-imx/mx7ulp/Kconfig" 1451 1452source "arch/arm/mach-imx/imx8/Kconfig" 1453 1454source "arch/arm/mach-imx/imx8m/Kconfig" 1455 1456source "arch/arm/mach-imx/mxs/Kconfig" 1457 1458source "arch/arm/mach-omap2/Kconfig" 1459 1460source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1461 1462source "arch/arm/mach-orion5x/Kconfig" 1463 1464source "arch/arm/mach-owl/Kconfig" 1465 1466source "arch/arm/mach-rmobile/Kconfig" 1467 1468source "arch/arm/mach-meson/Kconfig" 1469 1470source "arch/arm/mach-mediatek/Kconfig" 1471 1472source "arch/arm/mach-qemu/Kconfig" 1473 1474source "arch/arm/mach-rockchip/Kconfig" 1475 1476source "arch/arm/mach-s5pc1xx/Kconfig" 1477 1478source "arch/arm/mach-snapdragon/Kconfig" 1479 1480source "arch/arm/mach-socfpga/Kconfig" 1481 1482source "arch/arm/mach-sti/Kconfig" 1483 1484source "arch/arm/mach-stm32/Kconfig" 1485 1486source "arch/arm/mach-stm32mp/Kconfig" 1487 1488source "arch/arm/mach-sunxi/Kconfig" 1489 1490source "arch/arm/mach-tegra/Kconfig" 1491 1492source "arch/arm/mach-uniphier/Kconfig" 1493 1494source "arch/arm/cpu/armv7/vf610/Kconfig" 1495 1496source "arch/arm/mach-zynq/Kconfig" 1497 1498source "arch/arm/mach-versal/Kconfig" 1499 1500source "arch/arm/mach-zynqmp-r5/Kconfig" 1501 1502source "arch/arm/cpu/armv7/Kconfig" 1503 1504source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1505 1506source "arch/arm/cpu/armv8/Kconfig" 1507 1508source "arch/arm/mach-imx/Kconfig" 1509 1510source "board/bosch/shc/Kconfig" 1511source "board/CarMediaLab/flea3/Kconfig" 1512source "board/Marvell/aspenite/Kconfig" 1513source "board/Marvell/gplugd/Kconfig" 1514source "board/armadeus/apf27/Kconfig" 1515source "board/armltd/vexpress/Kconfig" 1516source "board/armltd/vexpress64/Kconfig" 1517source "board/broadcom/bcm23550_w1d/Kconfig" 1518source "board/broadcom/bcm28155_ap/Kconfig" 1519source "board/broadcom/bcm968580xref/Kconfig" 1520source "board/broadcom/bcmcygnus/Kconfig" 1521source "board/broadcom/bcmnsp/Kconfig" 1522source "board/broadcom/bcmns2/Kconfig" 1523source "board/cavium/thunderx/Kconfig" 1524source "board/cirrus/edb93xx/Kconfig" 1525source "board/eets/pdu001/Kconfig" 1526source "board/emulation/qemu-arm/Kconfig" 1527source "board/freescale/ls2080a/Kconfig" 1528source "board/freescale/ls2080aqds/Kconfig" 1529source "board/freescale/ls2080ardb/Kconfig" 1530source "board/freescale/ls1088a/Kconfig" 1531source "board/freescale/ls1021aqds/Kconfig" 1532source "board/freescale/ls1043aqds/Kconfig" 1533source "board/freescale/ls1021atwr/Kconfig" 1534source "board/freescale/ls1021aiot/Kconfig" 1535source "board/freescale/ls1046aqds/Kconfig" 1536source "board/freescale/ls1043ardb/Kconfig" 1537source "board/freescale/ls1046ardb/Kconfig" 1538source "board/freescale/ls1012aqds/Kconfig" 1539source "board/freescale/ls1012ardb/Kconfig" 1540source "board/freescale/ls1012afrdm/Kconfig" 1541source "board/freescale/mx35pdk/Kconfig" 1542source "board/freescale/s32v234evb/Kconfig" 1543source "board/grinn/chiliboard/Kconfig" 1544source "board/gumstix/pepper/Kconfig" 1545source "board/h2200/Kconfig" 1546source "board/hisilicon/hikey/Kconfig" 1547source "board/hisilicon/poplar/Kconfig" 1548source "board/isee/igep003x/Kconfig" 1549source "board/phytec/pcm051/Kconfig" 1550source "board/silica/pengwyn/Kconfig" 1551source "board/spear/spear300/Kconfig" 1552source "board/spear/spear310/Kconfig" 1553source "board/spear/spear320/Kconfig" 1554source "board/spear/spear600/Kconfig" 1555source "board/spear/x600/Kconfig" 1556source "board/st/stv0991/Kconfig" 1557source "board/tcl/sl50/Kconfig" 1558source "board/ucRobotics/bubblegum_96/Kconfig" 1559source "board/birdland/bav335x/Kconfig" 1560source "board/toradex/colibri_pxa270/Kconfig" 1561source "board/vscom/baltos/Kconfig" 1562source "board/woodburn/Kconfig" 1563source "board/xilinx/Kconfig" 1564source "board/xilinx/zynq/Kconfig" 1565source "board/xilinx/zynqmp/Kconfig" 1566source "board/zipitz2/Kconfig" 1567 1568source "arch/arm/Kconfig.debug" 1569 1570endmenu 1571 1572config SPL_LDSCRIPT 1573 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1574 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1575 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1576 1577 1578