1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_852421 101 bool 102 103config ARM_ERRATA_852423 104 bool 105 106config CPU_ARM720T 107 bool 108 select SYS_CACHE_SHIFT_5 109 110config CPU_ARM920T 111 bool 112 select SYS_CACHE_SHIFT_5 113 114config CPU_ARM926EJS 115 bool 116 select SYS_CACHE_SHIFT_5 117 118config CPU_ARM946ES 119 bool 120 select SYS_CACHE_SHIFT_5 121 122config CPU_ARM1136 123 bool 124 select SYS_CACHE_SHIFT_5 125 126config CPU_ARM1176 127 bool 128 select HAS_VBAR 129 select SYS_CACHE_SHIFT_5 130 131config CPU_V7 132 bool 133 select HAS_VBAR 134 select HAS_THUMB2 135 select SYS_CACHE_SHIFT_6 136 137config CPU_V7M 138 bool 139 select HAS_THUMB2 140 select THUMB2_KERNEL 141 select SYS_CACHE_SHIFT_5 142 143config CPU_PXA 144 bool 145 select SYS_CACHE_SHIFT_5 146 147config CPU_SA1100 148 bool 149 select SYS_CACHE_SHIFT_5 150 151config SYS_CPU 152 default "arm720t" if CPU_ARM720T 153 default "arm920t" if CPU_ARM920T 154 default "arm926ejs" if CPU_ARM926EJS 155 default "arm946es" if CPU_ARM946ES 156 default "arm1136" if CPU_ARM1136 157 default "arm1176" if CPU_ARM1176 158 default "armv7" if CPU_V7 159 default "armv7m" if CPU_V7M 160 default "pxa" if CPU_PXA 161 default "sa1100" if CPU_SA1100 162 default "armv8" if ARM64 163 164config SYS_ARM_ARCH 165 int 166 default 4 if CPU_ARM720T 167 default 4 if CPU_ARM920T 168 default 5 if CPU_ARM926EJS 169 default 5 if CPU_ARM946ES 170 default 6 if CPU_ARM1136 171 default 6 if CPU_ARM1176 172 default 7 if CPU_V7 173 default 7 if CPU_V7M 174 default 5 if CPU_PXA 175 default 4 if CPU_SA1100 176 default 8 if ARM64 177 178config SYS_CACHE_SHIFT_5 179 bool 180 181config SYS_CACHE_SHIFT_6 182 bool 183 184config SYS_CACHE_SHIFT_7 185 bool 186 187config SYS_CACHELINE_SIZE 188 int 189 default 128 if SYS_CACHE_SHIFT_7 190 default 64 if SYS_CACHE_SHIFT_6 191 default 32 if SYS_CACHE_SHIFT_5 192 193config ARM_SMCCC 194 bool "Support for ARM SMC Calling Convention (SMCCC)" 195 depends on CPU_V7 || ARM64 196 select ARM_PSCI_FW 197 help 198 Say Y here if you want to enable ARM SMC Calling Convention. 199 This should be enabled if U-Boot needs to communicate with system 200 firmware (for example, PSCI) according to SMCCC. 201 202config SEMIHOSTING 203 bool "support boot from semihosting" 204 help 205 In emulated environments, semihosting is a way for 206 the hosted environment to call out to the emulator to 207 retrieve files from the host machine. 208 209config SYS_THUMB_BUILD 210 bool "Build U-Boot using the Thumb instruction set" 211 depends on !ARM64 212 help 213 Use this flag to build U-Boot using the Thumb instruction set for 214 ARM architectures. Thumb instruction set provides better code 215 density. For ARM architectures that support Thumb2 this flag will 216 result in Thumb2 code generated by GCC. 217 218config SPL_SYS_THUMB_BUILD 219 bool "Build SPL using the Thumb instruction set" 220 default y if SYS_THUMB_BUILD 221 depends on !ARM64 222 help 223 Use this flag to build SPL using the Thumb instruction set for 224 ARM architectures. Thumb instruction set provides better code 225 density. For ARM architectures that support Thumb2 this flag will 226 result in Thumb2 code generated by GCC. 227 228config SYS_L2CACHE_OFF 229 bool "L2cache off" 230 help 231 If SoC does not support L2CACHE or one do not want to enable 232 L2CACHE, choose this option. 233 234config ENABLE_ARM_SOC_BOOT0_HOOK 235 bool "prepare BOOT0 header" 236 help 237 If the SoC's BOOT0 requires a header area filled with (magic) 238 values, then choose this option, and create a define called 239 ARM_SOC_BOOT0_HOOK which contains the required assembler 240 preprocessor code. 241 242config ARM_CORTEX_CPU_IS_UP 243 bool 244 default n 245 246config USE_ARCH_MEMCPY 247 bool "Use an assembly optimized implementation of memcpy" 248 default y 249 depends on !ARM64 250 help 251 Enable the generation of an optimized version of memcpy. 252 Such implementation may be faster under some conditions 253 but may increase the binary size. 254 255config SPL_USE_ARCH_MEMCPY 256 bool "Use an assembly optimized implementation of memcpy for SPL" 257 default y if USE_ARCH_MEMCPY 258 depends on !ARM64 259 help 260 Enable the generation of an optimized version of memcpy. 261 Such implementation may be faster under some conditions 262 but may increase the binary size. 263 264config USE_ARCH_MEMSET 265 bool "Use an assembly optimized implementation of memset" 266 default y 267 depends on !ARM64 268 help 269 Enable the generation of an optimized version of memset. 270 Such implementation may be faster under some conditions 271 but may increase the binary size. 272 273config SPL_USE_ARCH_MEMSET 274 bool "Use an assembly optimized implementation of memset for SPL" 275 default y if USE_ARCH_MEMSET 276 depends on !ARM64 277 help 278 Enable the generation of an optimized version of memset. 279 Such implementation may be faster under some conditions 280 but may increase the binary size. 281 282config ARM64_SUPPORT_AARCH32 283 bool "ARM64 system support AArch32 execution state" 284 default y if ARM64 && !TARGET_THUNDERX_88XX 285 help 286 This ARM64 system supports AArch32 execution state. 287 288choice 289 prompt "Target select" 290 default TARGET_HIKEY 291 292config ARCH_AT91 293 bool "Atmel AT91" 294 select SPL_BOARD_INIT if SPL 295 296config TARGET_EDB93XX 297 bool "Support edb93xx" 298 select CPU_ARM920T 299 300config TARGET_ASPENITE 301 bool "Support aspenite" 302 select CPU_ARM926EJS 303 304config TARGET_GPLUGD 305 bool "Support gplugd" 306 select CPU_ARM926EJS 307 308config ARCH_DAVINCI 309 bool "TI DaVinci" 310 select CPU_ARM926EJS 311 help 312 Support for TI's DaVinci platform. 313 314config KIRKWOOD 315 bool "Marvell Kirkwood" 316 select CPU_ARM926EJS 317 select BOARD_EARLY_INIT_F 318 select ARCH_MISC_INIT 319 320config ARCH_MVEBU 321 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 322 select OF_CONTROL 323 select OF_SEPARATE 324 select DM 325 select DM_ETH 326 select DM_SERIAL 327 select DM_SPI 328 select DM_SPI_FLASH 329 330config TARGET_DEVKIT3250 331 bool "Support devkit3250" 332 select CPU_ARM926EJS 333 select SUPPORT_SPL 334 335config TARGET_WORK_92105 336 bool "Support work_92105" 337 select CPU_ARM926EJS 338 select SUPPORT_SPL 339 340config TARGET_MX25PDK 341 bool "Support mx25pdk" 342 select BOARD_LATE_INIT 343 select CPU_ARM926EJS 344 select BOARD_EARLY_INIT_F 345 346config TARGET_ZMX25 347 bool "Support zmx25" 348 select BOARD_LATE_INIT 349 select CPU_ARM926EJS 350 351config TARGET_APF27 352 bool "Support apf27" 353 select CPU_ARM926EJS 354 select SUPPORT_SPL 355 356config TARGET_APX4DEVKIT 357 bool "Support apx4devkit" 358 select CPU_ARM926EJS 359 select SUPPORT_SPL 360 361config TARGET_XFI3 362 bool "Support xfi3" 363 select CPU_ARM926EJS 364 select SUPPORT_SPL 365 366config TARGET_M28EVK 367 bool "Support m28evk" 368 select CPU_ARM926EJS 369 select SUPPORT_SPL 370 371config TARGET_MX23EVK 372 bool "Support mx23evk" 373 select CPU_ARM926EJS 374 select SUPPORT_SPL 375 select BOARD_EARLY_INIT_F 376 377config TARGET_MX28EVK 378 bool "Support mx28evk" 379 select CPU_ARM926EJS 380 select SUPPORT_SPL 381 select BOARD_EARLY_INIT_F 382 383config TARGET_MX23_OLINUXINO 384 bool "Support mx23_olinuxino" 385 select CPU_ARM926EJS 386 select SUPPORT_SPL 387 select BOARD_EARLY_INIT_F 388 389config TARGET_BG0900 390 bool "Support bg0900" 391 select CPU_ARM926EJS 392 select SUPPORT_SPL 393 394config TARGET_SANSA_FUZE_PLUS 395 bool "Support sansa_fuze_plus" 396 select CPU_ARM926EJS 397 select SUPPORT_SPL 398 399config TARGET_SC_SPS_1 400 bool "Support sc_sps_1" 401 select CPU_ARM926EJS 402 select SUPPORT_SPL 403 404config ORION5X 405 bool "Marvell Orion" 406 select CPU_ARM926EJS 407 408config TARGET_SPEAR300 409 bool "Support spear300" 410 select CPU_ARM926EJS 411 select BOARD_EARLY_INIT_F 412 413config TARGET_SPEAR310 414 bool "Support spear310" 415 select CPU_ARM926EJS 416 select BOARD_EARLY_INIT_F 417 418config TARGET_SPEAR320 419 bool "Support spear320" 420 select CPU_ARM926EJS 421 select BOARD_EARLY_INIT_F 422 423config TARGET_SPEAR600 424 bool "Support spear600" 425 select CPU_ARM926EJS 426 select BOARD_EARLY_INIT_F 427 428config TARGET_STV0991 429 bool "Support stv0991" 430 select CPU_V7 431 select DM 432 select DM_SERIAL 433 select DM_SPI 434 select DM_SPI_FLASH 435 select SPI_FLASH 436 437config TARGET_X600 438 bool "Support x600" 439 select BOARD_LATE_INIT 440 select CPU_ARM926EJS 441 select SUPPORT_SPL 442 443config TARGET_IMX31_PHYCORE 444 bool "Support imx31_phycore_eet" 445 select CPU_ARM1136 446 select BOARD_EARLY_INIT_F 447 448config TARGET_IMX31_PHYCORE_EET 449 bool "Support imx31_phycore_eet" 450 select BOARD_LATE_INIT 451 select CPU_ARM1136 452 select BOARD_EARLY_INIT_F 453 454config TARGET_MX31ADS 455 bool "Support mx31ads" 456 select CPU_ARM1136 457 select BOARD_EARLY_INIT_F 458 459config TARGET_MX31PDK 460 bool "Support mx31pdk" 461 select BOARD_LATE_INIT 462 select CPU_ARM1136 463 select SUPPORT_SPL 464 select BOARD_EARLY_INIT_F 465 466config TARGET_WOODBURN 467 bool "Support woodburn" 468 select CPU_ARM1136 469 470config TARGET_WOODBURN_SD 471 bool "Support woodburn_sd" 472 select CPU_ARM1136 473 select SUPPORT_SPL 474 475config TARGET_FLEA3 476 bool "Support flea3" 477 select CPU_ARM1136 478 479config TARGET_MX35PDK 480 bool "Support mx35pdk" 481 select BOARD_LATE_INIT 482 select CPU_ARM1136 483 484config ARCH_BCM283X 485 bool "Broadcom BCM283X family" 486 select DM 487 select DM_SERIAL 488 select DM_GPIO 489 select OF_CONTROL 490 imply FAT_WRITE 491 imply ENV_IS_IN_FAT 492 493config TARGET_VEXPRESS_CA15_TC2 494 bool "Support vexpress_ca15_tc2" 495 select CPU_V7 496 select CPU_V7_HAS_NONSEC 497 select CPU_V7_HAS_VIRT 498 499config TARGET_VEXPRESS_CA5X2 500 bool "Support vexpress_ca5x2" 501 select CPU_V7 502 503config TARGET_VEXPRESS_CA9X4 504 bool "Support vexpress_ca9x4" 505 select CPU_V7 506 507config TARGET_BCM23550_W1D 508 bool "Support bcm23550_w1d" 509 select CPU_V7 510 imply CRC32_VERIFY 511 imply FAT_WRITE 512 513config TARGET_BCM28155_AP 514 bool "Support bcm28155_ap" 515 select CPU_V7 516 imply CRC32_VERIFY 517 imply FAT_WRITE 518 519config TARGET_BCMCYGNUS 520 bool "Support bcmcygnus" 521 select CPU_V7 522 imply CRC32_VERIFY 523 imply CMD_HASH 524 imply FAT_WRITE 525 imply HASH_VERIFY 526 imply NETDEVICES 527 imply BCM_SF2_ETH 528 imply BCM_SF2_ETH_GMAC 529 530config TARGET_BCMNSP 531 bool "Support bcmnsp" 532 select CPU_V7 533 534config TARGET_BCMNS2 535 bool "Support Broadcom Northstar2" 536 select ARM64 537 help 538 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 539 ARMv8 Cortex-A57 processors targeting a broad range of networking 540 applications 541 542config ARCH_EXYNOS 543 bool "Samsung EXYNOS" 544 select DM 545 select DM_I2C 546 select DM_SPI_FLASH 547 select DM_SERIAL 548 select DM_SPI 549 select DM_GPIO 550 select DM_KEYBOARD 551 imply FAT_WRITE 552 553config ARCH_S5PC1XX 554 bool "Samsung S5PC1XX" 555 select CPU_V7 556 select DM 557 select DM_SERIAL 558 select DM_GPIO 559 select DM_I2C 560 561config ARCH_HIGHBANK 562 bool "Calxeda Highbank" 563 select CPU_V7 564 565config ARCH_INTEGRATOR 566 bool "ARM Ltd. Integrator family" 567 select DM 568 select DM_SERIAL 569 570config ARCH_KEYSTONE 571 bool "TI Keystone" 572 select CPU_V7 573 select SUPPORT_SPL 574 select SYS_THUMB_BUILD 575 select CMD_POWEROFF 576 imply CMD_MTDPARTS 577 imply FIT 578 579config ARCH_OMAP2PLUS 580 bool "TI OMAP2+" 581 select CPU_V7 582 select SPL_BOARD_INIT if SPL 583 select SUPPORT_SPL 584 imply FIT 585 586config ARCH_MESON 587 bool "Amlogic Meson" 588 help 589 Support for the Meson SoC family developed by Amlogic Inc., 590 targeted at media players and tablet computers. We currently 591 support the S905 (GXBaby) 64-bit SoC. 592 593config ARCH_MX7ULP 594 bool "NXP MX7ULP" 595 select CPU_V7 596 select ROM_UNIFIED_SECTIONS 597 598config ARCH_MX7 599 bool "Freescale MX7" 600 select CPU_V7 601 select SYS_FSL_HAS_SEC if SECURE_BOOT 602 select SYS_FSL_SEC_COMPAT_4 603 select SYS_FSL_SEC_LE 604 select BOARD_EARLY_INIT_F 605 select ARCH_MISC_INIT 606 607config ARCH_MX6 608 bool "Freescale MX6" 609 select CPU_V7 610 select SYS_FSL_HAS_SEC if SECURE_BOOT 611 select SYS_FSL_SEC_COMPAT_4 612 select SYS_FSL_SEC_LE 613 select SYS_THUMB_BUILD if SPL 614 615config ARCH_MX5 616 bool "Freescale MX5" 617 select CPU_V7 618 select BOARD_EARLY_INIT_F 619 620config ARCH_RMOBILE 621 bool "Renesas ARM SoCs" 622 select DM 623 select DM_SERIAL 624 select BOARD_EARLY_INIT_F 625 imply FAT_WRITE 626 imply SYS_THUMB_BUILD 627 628config TARGET_S32V234EVB 629 bool "Support s32v234evb" 630 select ARM64 631 select SYS_FSL_ERRATUM_ESDHC111 632 633config ARCH_SNAPDRAGON 634 bool "Qualcomm Snapdragon SoCs" 635 select ARM64 636 select DM 637 select DM_GPIO 638 select DM_SERIAL 639 select SPMI 640 select OF_CONTROL 641 select OF_SEPARATE 642 643config ARCH_SOCFPGA 644 bool "Altera SOCFPGA family" 645 select CPU_V7 646 select SUPPORT_SPL 647 select OF_CONTROL 648 select SPL_OF_CONTROL 649 select DM 650 select DM_SPI_FLASH 651 select DM_SPI 652 select ENABLE_ARM_SOC_BOOT0_HOOK 653 select ARCH_EARLY_INIT_R 654 select ARCH_MISC_INIT 655 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 656 select SYS_THUMB_BUILD 657 imply CMD_MTDPARTS 658 imply CRC32_VERIFY 659 imply FAT_WRITE 660 661config ARCH_SUNXI 662 bool "Support sunxi (Allwinner) SoCs" 663 select CMD_GPIO 664 select CMD_MMC if MMC 665 select CMD_USB if DISTRO_DEFAULTS 666 select DM 667 select DM_ETH 668 select DM_GPIO 669 select DM_KEYBOARD 670 select DM_SERIAL 671 select DM_USB if DISTRO_DEFAULTS 672 select OF_BOARD_SETUP 673 select OF_CONTROL 674 select OF_SEPARATE 675 select SPL_STACK_R if SPL 676 select SPL_SYS_MALLOC_SIMPLE if SPL 677 select SYS_NS16550 678 select SPL_SYS_THUMB_BUILD if !ARM64 679 select USB if DISTRO_DEFAULTS 680 select USB_STORAGE if DISTRO_DEFAULTS 681 select USB_KEYBOARD if DISTRO_DEFAULTS 682 select USE_TINY_PRINTF 683 imply FAT_WRITE 684 imply PRE_CONSOLE_BUFFER 685 imply SPL_GPIO_SUPPORT 686 imply SPL_LIBCOMMON_SUPPORT 687 imply SPL_LIBDISK_SUPPORT 688 imply SPL_LIBGENERIC_SUPPORT 689 imply SPL_MMC_SUPPORT if MMC 690 imply SPL_POWER_SUPPORT 691 imply SPL_SERIAL_SUPPORT 692 693config TARGET_TS4600 694 bool "Support TS4600" 695 select CPU_ARM926EJS 696 select SUPPORT_SPL 697 698config ARCH_VF610 699 bool "Freescale Vybrid" 700 select CPU_V7 701 select SYS_FSL_ERRATUM_ESDHC111 702 imply CMD_MTDPARTS 703 704config ARCH_ZYNQ 705 bool "Xilinx Zynq Platform" 706 select BOARD_LATE_INIT 707 select CPU_V7 708 select SUPPORT_SPL 709 select OF_CONTROL 710 select SPL_BOARD_INIT if SPL 711 select SPL_OF_CONTROL if SPL 712 select DM 713 select DM_ETH 714 select DM_GPIO 715 select SPL_DM if SPL 716 select DM_MMC 717 select DM_MMC_OPS 718 select DM_SPI 719 select DM_SERIAL 720 select DM_SPI_FLASH 721 select SPL_SEPARATE_BSS if SPL 722 select DM_USB if USB 723 select BLK 724 select CLK 725 select SPL_CLK 726 select CLK_ZYNQ 727 imply CMD_CLK 728 imply FAT_WRITE 729 730config ARCH_ZYNQMP 731 bool "Support Xilinx ZynqMP Platform" 732 select ARM64 733 select BOARD_LATE_INIT 734 select DM 735 select OF_CONTROL 736 select DM_SERIAL 737 select SUPPORT_SPL 738 select CLK 739 select SPL_BOARD_INIT if SPL 740 select SPL_CLK 741 select DM_USB if USB 742 imply FAT_WRITE 743 744config TEGRA 745 bool "NVIDIA Tegra" 746 imply FAT_WRITE 747 748config TARGET_VEXPRESS64_AEMV8A 749 bool "Support vexpress_aemv8a" 750 select ARM64 751 752config TARGET_VEXPRESS64_BASE_FVP 753 bool "Support Versatile Express ARMv8a FVP BASE model" 754 select ARM64 755 select SEMIHOSTING 756 757config TARGET_VEXPRESS64_BASE_FVP_DRAM 758 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 759 select ARM64 760 help 761 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 762 the default config to allow the user to load the images directly into 763 DRAM using model parameters rather than by using semi-hosting to load 764 the files from the host filesystem. 765 766config TARGET_VEXPRESS64_JUNO 767 bool "Support Versatile Express Juno Development Platform" 768 select ARM64 769 770config TARGET_LS2080A_EMU 771 bool "Support ls2080a_emu" 772 select ARCH_LS2080A 773 select ARM64 774 select ARMV8_MULTIENTRY 775 select ARCH_MISC_INIT 776 help 777 Support for Freescale LS2080A_EMU platform 778 The LS2080A Development System (EMULATOR) is a pre silicon 779 development platform that supports the QorIQ LS2080A 780 Layerscape Architecture processor. 781 782config TARGET_LS2080A_SIMU 783 bool "Support ls2080a_simu" 784 select ARCH_LS2080A 785 select ARM64 786 select ARMV8_MULTIENTRY 787 select ARCH_MISC_INIT 788 help 789 Support for Freescale LS2080A_SIMU platform 790 The LS2080A Development System (QDS) is a pre silicon 791 development platform that supports the QorIQ LS2080A 792 Layerscape Architecture processor. 793 794config TARGET_LS2080AQDS 795 bool "Support ls2080aqds" 796 select ARCH_LS2080A 797 select ARM64 798 select ARMV8_MULTIENTRY 799 select BOARD_LATE_INIT 800 select SUPPORT_SPL 801 select ARCH_MISC_INIT 802 imply SCSI 803 help 804 Support for Freescale LS2080AQDS platform 805 The LS2080A Development System (QDS) is a high-performance 806 development platform that supports the QorIQ LS2080A 807 Layerscape Architecture processor. 808 809config TARGET_LS2080ARDB 810 bool "Support ls2080ardb" 811 select ARCH_LS2080A 812 select ARM64 813 select ARMV8_MULTIENTRY 814 select BOARD_LATE_INIT 815 select SUPPORT_SPL 816 select ARCH_MISC_INIT 817 imply SCSI 818 help 819 Support for Freescale LS2080ARDB platform. 820 The LS2080A Reference design board (RDB) is a high-performance 821 development platform that supports the QorIQ LS2080A 822 Layerscape Architecture processor. 823 824config TARGET_LS2081ARDB 825 bool "Support ls2081ardb" 826 select ARCH_LS2080A 827 select ARM64 828 select ARMV8_MULTIENTRY 829 select BOARD_LATE_INIT 830 select SUPPORT_SPL 831 select ARCH_MISC_INIT 832 help 833 Support for Freescale LS2081ARDB platform. 834 The LS2081A Reference design board (RDB) is a high-performance 835 development platform that supports the QorIQ LS2081A/LS2041A 836 Layerscape Architecture processor. 837 838config TARGET_HIKEY 839 bool "Support HiKey 96boards Consumer Edition Platform" 840 select ARM64 841 select DM 842 select DM_GPIO 843 select DM_SERIAL 844 select OF_CONTROL 845 help 846 Support for HiKey 96boards platform. It features a HI6220 847 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 848 849config TARGET_POPLAR 850 bool "Support Poplar 96boards Enterprise Edition Platform" 851 select ARM64 852 select DM 853 select OF_CONTROL 854 select DM_SERIAL 855 select DM_USB 856 help 857 Support for Poplar 96boards EE platform. It features a HI3798cv200 858 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 859 making it capable of running any commercial set-top solution based on 860 Linux or Android. 861 862config TARGET_LS1012AQDS 863 bool "Support ls1012aqds" 864 select ARCH_LS1012A 865 select ARM64 866 select BOARD_LATE_INIT 867 help 868 Support for Freescale LS1012AQDS platform. 869 The LS1012A Development System (QDS) is a high-performance 870 development platform that supports the QorIQ LS1012A 871 Layerscape Architecture processor. 872 873config TARGET_LS1012ARDB 874 bool "Support ls1012ardb" 875 select ARCH_LS1012A 876 select ARM64 877 select BOARD_LATE_INIT 878 imply SCSI 879 help 880 Support for Freescale LS1012ARDB platform. 881 The LS1012A Reference design board (RDB) is a high-performance 882 development platform that supports the QorIQ LS1012A 883 Layerscape Architecture processor. 884 885config TARGET_LS1012AFRDM 886 bool "Support ls1012afrdm" 887 select ARCH_LS1012A 888 select ARM64 889 help 890 Support for Freescale LS1012AFRDM platform. 891 The LS1012A Freedom board (FRDM) is a high-performance 892 development platform that supports the QorIQ LS1012A 893 Layerscape Architecture processor. 894 895config TARGET_LS1021AQDS 896 bool "Support ls1021aqds" 897 select BOARD_LATE_INIT 898 select CPU_V7 899 select CPU_V7_HAS_NONSEC 900 select CPU_V7_HAS_VIRT 901 select SUPPORT_SPL 902 select ARCH_LS1021A 903 select ARCH_SUPPORT_PSCI 904 select LS1_DEEP_SLEEP 905 select SYS_FSL_DDR 906 select BOARD_EARLY_INIT_F 907 imply SCSI 908 909config TARGET_LS1021ATWR 910 bool "Support ls1021atwr" 911 select BOARD_LATE_INIT 912 select CPU_V7 913 select CPU_V7_HAS_NONSEC 914 select CPU_V7_HAS_VIRT 915 select SUPPORT_SPL 916 select ARCH_LS1021A 917 select ARCH_SUPPORT_PSCI 918 select LS1_DEEP_SLEEP 919 select BOARD_EARLY_INIT_F 920 imply SCSI 921 922config TARGET_LS1021AIOT 923 bool "Support ls1021aiot" 924 select BOARD_LATE_INIT 925 select CPU_V7 926 select CPU_V7_HAS_NONSEC 927 select CPU_V7_HAS_VIRT 928 select SUPPORT_SPL 929 select ARCH_LS1021A 930 select ARCH_SUPPORT_PSCI 931 imply SCSI 932 help 933 Support for Freescale LS1021AIOT platform. 934 The LS1021A Freescale board (IOT) is a high-performance 935 development platform that supports the QorIQ LS1021A 936 Layerscape Architecture processor. 937 938config TARGET_LS1043AQDS 939 bool "Support ls1043aqds" 940 select ARCH_LS1043A 941 select ARM64 942 select ARMV8_MULTIENTRY 943 select BOARD_LATE_INIT 944 select SUPPORT_SPL 945 select BOARD_EARLY_INIT_F 946 imply SCSI 947 help 948 Support for Freescale LS1043AQDS platform. 949 950config TARGET_LS1043ARDB 951 bool "Support ls1043ardb" 952 select ARCH_LS1043A 953 select ARM64 954 select ARMV8_MULTIENTRY 955 select BOARD_LATE_INIT 956 select SUPPORT_SPL 957 select BOARD_EARLY_INIT_F 958 imply SCSI 959 help 960 Support for Freescale LS1043ARDB platform. 961 962config TARGET_LS1046AQDS 963 bool "Support ls1046aqds" 964 select ARCH_LS1046A 965 select ARM64 966 select ARMV8_MULTIENTRY 967 select BOARD_LATE_INIT 968 select SUPPORT_SPL 969 select DM_SPI_FLASH if DM_SPI 970 select BOARD_EARLY_INIT_F 971 imply SCSI 972 help 973 Support for Freescale LS1046AQDS platform. 974 The LS1046A Development System (QDS) is a high-performance 975 development platform that supports the QorIQ LS1046A 976 Layerscape Architecture processor. 977 978config TARGET_LS1046ARDB 979 bool "Support ls1046ardb" 980 select ARCH_LS1046A 981 select ARM64 982 select ARMV8_MULTIENTRY 983 select BOARD_LATE_INIT 984 select SUPPORT_SPL 985 select DM_SPI_FLASH if DM_SPI 986 select POWER_MC34VR500 987 select BOARD_EARLY_INIT_F 988 imply SCSI 989 help 990 Support for Freescale LS1046ARDB platform. 991 The LS1046A Reference Design Board (RDB) is a high-performance 992 development platform that supports the QorIQ LS1046A 993 Layerscape Architecture processor. 994 995config TARGET_H2200 996 bool "Support h2200" 997 select CPU_PXA 998 999config TARGET_ZIPITZ2 1000 bool "Support zipitz2" 1001 select CPU_PXA 1002 1003config TARGET_COLIBRI_PXA270 1004 bool "Support colibri_pxa270" 1005 select CPU_PXA 1006 1007config ARCH_UNIPHIER 1008 bool "Socionext UniPhier SoCs" 1009 select BOARD_LATE_INIT 1010 select CLK_UNIPHIER 1011 select DM 1012 select DM_GPIO 1013 select DM_I2C 1014 select DM_MMC 1015 select DM_RESET 1016 select DM_SERIAL 1017 select DM_USB 1018 select OF_CONTROL 1019 select OF_LIBFDT 1020 select PINCTRL 1021 select SPL_BOARD_INIT if SPL 1022 select SPL_DM if SPL 1023 select SPL_LIBCOMMON_SUPPORT if SPL 1024 select SPL_LIBGENERIC_SUPPORT if SPL 1025 select SPL_OF_CONTROL if SPL 1026 select SPL_PINCTRL if SPL 1027 select SUPPORT_SPL 1028 imply FAT_WRITE 1029 imply ENV_IS_IN_MMC 1030 help 1031 Support for UniPhier SoC family developed by Socionext Inc. 1032 (formerly, System LSI Business Division of Panasonic Corporation) 1033 1034config STM32 1035 bool "Support STM32" 1036 select CPU_V7M 1037 select DM 1038 select DM_SERIAL 1039 select SYS_THUMB_BUILD 1040 1041config ARCH_STI 1042 bool "Support STMicrolectronics SoCs" 1043 select CPU_V7 1044 select DM 1045 select DM_SERIAL 1046 select BLK 1047 select DM_MMC 1048 select DM_RESET 1049 help 1050 Support for STMicroelectronics STiH407/10 SoC family. 1051 This SoC is used on Linaro 96Board STiH410-B2260 1052 1053config ARCH_ROCKCHIP 1054 bool "Support Rockchip SoCs" 1055 select OF_CONTROL 1056 select BLK 1057 select DM 1058 select SPL_DM if SPL 1059 select SYS_MALLOC_F 1060 select SYS_THUMB_BUILD if !ARM64 1061 select SPL_SYS_MALLOC_SIMPLE if SPL 1062 select DM_GPIO 1063 select DM_I2C 1064 select DM_MMC 1065 select DM_MMC_OPS 1066 select DM_SERIAL 1067 select DM_SPI 1068 select DM_SPI_FLASH 1069 select DM_USB if USB 1070 select DM_PWM 1071 select DM_REGULATOR 1072 imply FAT_WRITE 1073 1074config TARGET_THUNDERX_88XX 1075 bool "Support ThunderX 88xx" 1076 select ARM64 1077 select OF_CONTROL 1078 select SYS_CACHE_SHIFT_7 1079 1080config ARCH_ASPEED 1081 bool "Support Aspeed SoCs" 1082 select OF_CONTROL 1083 select DM 1084 1085endchoice 1086 1087source "arch/arm/mach-aspeed/Kconfig" 1088 1089source "arch/arm/mach-at91/Kconfig" 1090 1091source "arch/arm/mach-bcm283x/Kconfig" 1092 1093source "arch/arm/mach-davinci/Kconfig" 1094 1095source "arch/arm/mach-exynos/Kconfig" 1096 1097source "arch/arm/mach-highbank/Kconfig" 1098 1099source "arch/arm/mach-integrator/Kconfig" 1100 1101source "arch/arm/mach-keystone/Kconfig" 1102 1103source "arch/arm/mach-kirkwood/Kconfig" 1104 1105source "arch/arm/mach-mvebu/Kconfig" 1106 1107source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1108 1109source "arch/arm/mach-imx/mx7ulp/Kconfig" 1110 1111source "arch/arm/mach-imx/mx7/Kconfig" 1112 1113source "arch/arm/mach-imx/mx6/Kconfig" 1114 1115source "arch/arm/mach-imx/mx5/Kconfig" 1116 1117source "arch/arm/mach-omap2/Kconfig" 1118 1119source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1120 1121source "arch/arm/mach-orion5x/Kconfig" 1122 1123source "arch/arm/mach-rmobile/Kconfig" 1124 1125source "arch/arm/mach-meson/Kconfig" 1126 1127source "arch/arm/mach-rockchip/Kconfig" 1128 1129source "arch/arm/mach-s5pc1xx/Kconfig" 1130 1131source "arch/arm/mach-snapdragon/Kconfig" 1132 1133source "arch/arm/mach-socfpga/Kconfig" 1134 1135source "arch/arm/mach-sti/Kconfig" 1136 1137source "arch/arm/mach-stm32/Kconfig" 1138 1139source "arch/arm/mach-sunxi/Kconfig" 1140 1141source "arch/arm/mach-tegra/Kconfig" 1142 1143source "arch/arm/mach-uniphier/Kconfig" 1144 1145source "arch/arm/cpu/armv7/vf610/Kconfig" 1146 1147source "arch/arm/mach-zynq/Kconfig" 1148 1149source "arch/arm/cpu/armv7/Kconfig" 1150 1151source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1152 1153source "arch/arm/cpu/armv8/Kconfig" 1154 1155source "arch/arm/mach-imx/Kconfig" 1156 1157source "board/aries/m28evk/Kconfig" 1158source "board/bosch/shc/Kconfig" 1159source "board/CarMediaLab/flea3/Kconfig" 1160source "board/Marvell/aspenite/Kconfig" 1161source "board/Marvell/gplugd/Kconfig" 1162source "board/armadeus/apf27/Kconfig" 1163source "board/armltd/vexpress/Kconfig" 1164source "board/armltd/vexpress64/Kconfig" 1165source "board/bluegiga/apx4devkit/Kconfig" 1166source "board/broadcom/bcm23550_w1d/Kconfig" 1167source "board/broadcom/bcm28155_ap/Kconfig" 1168source "board/broadcom/bcmcygnus/Kconfig" 1169source "board/broadcom/bcmnsp/Kconfig" 1170source "board/broadcom/bcmns2/Kconfig" 1171source "board/cavium/thunderx/Kconfig" 1172source "board/cirrus/edb93xx/Kconfig" 1173source "board/creative/xfi3/Kconfig" 1174source "board/freescale/ls2080a/Kconfig" 1175source "board/freescale/ls2080aqds/Kconfig" 1176source "board/freescale/ls2080ardb/Kconfig" 1177source "board/freescale/ls1021aqds/Kconfig" 1178source "board/freescale/ls1043aqds/Kconfig" 1179source "board/freescale/ls1021atwr/Kconfig" 1180source "board/freescale/ls1021aiot/Kconfig" 1181source "board/freescale/ls1046aqds/Kconfig" 1182source "board/freescale/ls1043ardb/Kconfig" 1183source "board/freescale/ls1046ardb/Kconfig" 1184source "board/freescale/ls1012aqds/Kconfig" 1185source "board/freescale/ls1012ardb/Kconfig" 1186source "board/freescale/ls1012afrdm/Kconfig" 1187source "board/freescale/mx23evk/Kconfig" 1188source "board/freescale/mx25pdk/Kconfig" 1189source "board/freescale/mx28evk/Kconfig" 1190source "board/freescale/mx31ads/Kconfig" 1191source "board/freescale/mx31pdk/Kconfig" 1192source "board/freescale/mx35pdk/Kconfig" 1193source "board/freescale/s32v234evb/Kconfig" 1194source "board/gdsys/a38x/Kconfig" 1195source "board/grinn/chiliboard/Kconfig" 1196source "board/gumstix/pepper/Kconfig" 1197source "board/h2200/Kconfig" 1198source "board/hisilicon/hikey/Kconfig" 1199source "board/hisilicon/poplar/Kconfig" 1200source "board/imx31_phycore/Kconfig" 1201source "board/isee/igep003x/Kconfig" 1202source "board/olimex/mx23_olinuxino/Kconfig" 1203source "board/phytec/pcm051/Kconfig" 1204source "board/ppcag/bg0900/Kconfig" 1205source "board/sandisk/sansa_fuze_plus/Kconfig" 1206source "board/schulercontrol/sc_sps_1/Kconfig" 1207source "board/silica/pengwyn/Kconfig" 1208source "board/spear/spear300/Kconfig" 1209source "board/spear/spear310/Kconfig" 1210source "board/spear/spear320/Kconfig" 1211source "board/spear/spear600/Kconfig" 1212source "board/spear/x600/Kconfig" 1213source "board/st/stv0991/Kconfig" 1214source "board/syteco/zmx25/Kconfig" 1215source "board/tcl/sl50/Kconfig" 1216source "board/birdland/bav335x/Kconfig" 1217source "board/timll/devkit3250/Kconfig" 1218source "board/toradex/colibri_pxa270/Kconfig" 1219source "board/technologic/ts4600/Kconfig" 1220source "board/vscom/baltos/Kconfig" 1221source "board/woodburn/Kconfig" 1222source "board/work-microwave/work_92105/Kconfig" 1223source "board/zipitz2/Kconfig" 1224 1225source "arch/arm/Kconfig.debug" 1226 1227endmenu 1228