xref: /openbmc/u-boot/arch/arm/Kconfig (revision 22929e12)
1menu "ARM architecture"
2	depends on ARM
3
4config SYS_ARCH
5	default "arm"
6
7config ARM64
8	bool
9	select PHYS_64BIT
10	select SYS_CACHE_SHIFT_6
11
12if ARM64
13config POSITION_INDEPENDENT
14	bool "Generate position-independent pre-relocation code"
15	help
16	  U-Boot expects to be linked to a specific hard-coded address, and to
17	  be loaded to and run from that address. This option lifts that
18	  restriction, thus allowing the code to be loaded to and executed
19	  from almost any address. This logic relies on the relocation
20	  information that is embedded into the binary to support U-Boot
21	  relocating itself to the top-of-RAM later during execution.
22
23config SYS_INIT_SP_BSS_OFFSET
24	int
25	help
26	  U-Boot typically uses a hard-coded value for the stack pointer
27	  before relocation. Define this option to instead calculate the
28	  initial SP at run-time. This is useful to avoid hard-coding addresses
29	  into U-Boot, so that can be loaded and executed at arbitrary
30	  addresses and thus avoid using arbitrary addresses at runtime. This
31	  option's value is the offset added to &_bss_start in order to
32	  calculate the stack pointer. This offset should be large enough so
33	  that the early malloc region, global data (gd), and early stack usage
34	  do not overlap any appended DTB.
35
36config LINUX_KERNEL_IMAGE_HEADER
37	bool
38	help
39	  Place a Linux kernel image header at the start of the U-Boot binary.
40	  The format of the header is described in the Linux kernel source at
41	  Documentation/arm64/booting.txt. This feature is useful since the
42	  image header reports the amount of memory (BSS and similar) that
43	  U-Boot needs to use, but which isn't part of the binary.
44
45if LINUX_KERNEL_IMAGE_HEADER
46config LNX_KRNL_IMG_TEXT_OFFSET_BASE
47	hex
48	help
49	  The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50	  TEXT_OFFSET value written in to the Linux kernel image header.
51endif
52endif
53
54config STATIC_RELA
55	bool
56	default y if ARM64 && !POSITION_INDEPENDENT
57
58config DMA_ADDR_T_64BIT
59	bool
60	default y if ARM64
61
62config HAS_VBAR
63	bool
64
65config HAS_THUMB2
66	bool
67
68# Used for compatibility with asm files copied from the kernel
69config ARM_ASM_UNIFIED
70	bool
71	default y
72
73# Used for compatibility with asm files copied from the kernel
74config THUMB2_KERNEL
75	bool
76
77config SYS_ARM_CACHE_CP15
78	bool "CP15 based cache enabling support"
79	help
80	  Select this if your processor suports enabling caches by using
81	  CP15 registers.
82
83config SYS_ARM_MMU
84	bool "MMU-based Paged Memory Management Support"
85	select SYS_ARM_CACHE_CP15
86	help
87	  Select if you want MMU-based virtualised addressing space
88	  support by paged memory management.
89
90config SYS_ARM_MPU
91	bool 'Use the ARM v7 PMSA Compliant MPU'
92	help
93	  Some ARM systems without an MMU have instead a Memory Protection
94	  Unit (MPU) that defines the type and permissions for regions of
95	  memory.
96	  If your CPU has an MPU then you should choose 'y' here unless you
97	  know that you do not want to use the MPU.
98
99# If set, the workarounds for these ARM errata are applied early during U-Boot
100# startup. Note that in general these options force the workarounds to be
101# applied; no CPU-type/version detection exists, unlike the similar options in
102# the Linux kernel. Do not set these options unless they apply!  Also note that
103# the following can be machine specific errata. These do have ability to
104# provide rudimentary version and machine specific checks, but expect no
105# product checks:
106# CONFIG_ARM_ERRATA_430973
107# CONFIG_ARM_ERRATA_454179
108# CONFIG_ARM_ERRATA_621766
109# CONFIG_ARM_ERRATA_798870
110# CONFIG_ARM_ERRATA_801819
111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
113
114config ARM_ERRATA_430973
115	bool
116
117config ARM_ERRATA_454179
118	bool
119
120config ARM_ERRATA_621766
121	bool
122
123config ARM_ERRATA_716044
124	bool
125
126config ARM_ERRATA_725233
127	bool
128
129config ARM_ERRATA_742230
130	bool
131
132config ARM_ERRATA_743622
133	bool
134
135config ARM_ERRATA_751472
136	bool
137
138config ARM_ERRATA_761320
139	bool
140
141config ARM_ERRATA_773022
142	bool
143
144config ARM_ERRATA_774769
145	bool
146
147config ARM_ERRATA_794072
148	bool
149
150config ARM_ERRATA_798870
151	bool
152
153config ARM_ERRATA_801819
154	bool
155
156config ARM_ERRATA_826974
157	bool
158
159config ARM_ERRATA_828024
160	bool
161
162config ARM_ERRATA_829520
163	bool
164
165config ARM_ERRATA_833069
166	bool
167
168config ARM_ERRATA_833471
169	bool
170
171config ARM_ERRATA_845369
172	bool
173
174config ARM_ERRATA_852421
175	bool
176
177config ARM_ERRATA_852423
178	bool
179
180config ARM_ERRATA_855873
181	bool
182
183config ARM_CORTEX_A8_CVE_2017_5715
184	bool
185
186config ARM_CORTEX_A15_CVE_2017_5715
187	bool
188
189config CPU_ARM720T
190	bool
191	select SYS_CACHE_SHIFT_5
192	imply SYS_ARM_MMU
193
194config CPU_ARM920T
195	bool
196	select SYS_CACHE_SHIFT_5
197	imply SYS_ARM_MMU
198
199config CPU_ARM926EJS
200	bool
201	select SYS_CACHE_SHIFT_5
202	imply SYS_ARM_MMU
203
204config CPU_ARM946ES
205	bool
206	select SYS_CACHE_SHIFT_5
207	imply SYS_ARM_MMU
208
209config CPU_ARM1136
210	bool
211	select SYS_CACHE_SHIFT_5
212	imply SYS_ARM_MMU
213
214config CPU_ARM1176
215	bool
216	select HAS_VBAR
217	select SYS_CACHE_SHIFT_5
218	imply SYS_ARM_MMU
219
220config CPU_V7A
221	bool
222	select HAS_THUMB2
223	select HAS_VBAR
224	select SYS_CACHE_SHIFT_6
225	imply SYS_ARM_MMU
226
227config CPU_V7M
228	bool
229	select HAS_THUMB2
230	select SYS_ARM_MPU
231	select SYS_CACHE_SHIFT_5
232	select SYS_THUMB_BUILD
233	select THUMB2_KERNEL
234
235config CPU_V7R
236	bool
237	select HAS_THUMB2
238	select SYS_ARM_CACHE_CP15
239	select SYS_ARM_MPU
240	select SYS_CACHE_SHIFT_6
241
242config CPU_PXA
243	bool
244	select SYS_CACHE_SHIFT_5
245	imply SYS_ARM_MMU
246
247config CPU_SA1100
248	bool
249	select SYS_CACHE_SHIFT_5
250	imply SYS_ARM_MMU
251
252config SYS_CPU
253	default "arm720t" if CPU_ARM720T
254	default "arm920t" if CPU_ARM920T
255	default "arm926ejs" if CPU_ARM926EJS
256	default "arm946es" if CPU_ARM946ES
257	default "arm1136" if CPU_ARM1136
258	default "arm1176" if CPU_ARM1176
259	default "armv7" if CPU_V7A
260	default "armv7" if CPU_V7R
261	default "armv7m" if CPU_V7M
262	default "pxa" if CPU_PXA
263	default "sa1100" if CPU_SA1100
264	default "armv8" if ARM64
265
266config SYS_ARM_ARCH
267	int
268	default 4 if CPU_ARM720T
269	default 4 if CPU_ARM920T
270	default 5 if CPU_ARM926EJS
271	default 5 if CPU_ARM946ES
272	default 6 if CPU_ARM1136
273	default 6 if CPU_ARM1176
274	default 7 if CPU_V7A
275	default 7 if CPU_V7M
276	default 7 if CPU_V7R
277	default 5 if CPU_PXA
278	default 4 if CPU_SA1100
279	default 8 if ARM64
280
281config SYS_CACHE_SHIFT_5
282	bool
283
284config SYS_CACHE_SHIFT_6
285	bool
286
287config SYS_CACHE_SHIFT_7
288	bool
289
290config SYS_CACHELINE_SIZE
291	int
292	default 128 if SYS_CACHE_SHIFT_7
293	default 64 if SYS_CACHE_SHIFT_6
294	default 32 if SYS_CACHE_SHIFT_5
295
296config SYS_ARCH_TIMER
297	bool "ARM Generic Timer support"
298	depends on CPU_V7A || ARM64
299	default y if ARM64
300	help
301	  The ARM Generic Timer (aka arch-timer) provides an architected
302	  interface to a timer source on an SoC.
303	  It is mandantory for ARMv8 implementation and widely available
304	  on ARMv7 systems.
305
306config ARM_SMCCC
307	bool "Support for ARM SMC Calling Convention (SMCCC)"
308	depends on CPU_V7A || ARM64
309	select ARM_PSCI_FW
310	help
311	  Say Y here if you want to enable ARM SMC Calling Convention.
312	  This should be enabled if U-Boot needs to communicate with system
313	  firmware (for example, PSCI) according to SMCCC.
314
315config SEMIHOSTING
316	bool "support boot from semihosting"
317	help
318	  In emulated environments, semihosting is a way for
319	  the hosted environment to call out to the emulator to
320	  retrieve files from the host machine.
321
322config SYS_THUMB_BUILD
323	bool "Build U-Boot using the Thumb instruction set"
324	depends on !ARM64
325	help
326	   Use this flag to build U-Boot using the Thumb instruction set for
327	   ARM architectures. Thumb instruction set provides better code
328	   density. For ARM architectures that support Thumb2 this flag will
329	   result in Thumb2 code generated by GCC.
330
331config SPL_SYS_THUMB_BUILD
332	bool "Build SPL using the Thumb instruction set"
333	default y if SYS_THUMB_BUILD
334	depends on !ARM64
335	help
336	   Use this flag to build SPL using the Thumb instruction set for
337	   ARM architectures. Thumb instruction set provides better code
338	   density. For ARM architectures that support Thumb2 this flag will
339	   result in Thumb2 code generated by GCC.
340
341config SYS_L2CACHE_OFF
342	bool "L2cache off"
343	help
344	  If SoC does not support L2CACHE or one do not want to enable
345	  L2CACHE, choose this option.
346
347config ENABLE_ARM_SOC_BOOT0_HOOK
348	bool "prepare BOOT0 header"
349	help
350	  If the SoC's BOOT0 requires a header area filled with (magic)
351	  values, then choose this option, and create a file included as
352	  <asm/arch/boot0.h> which contains the required assembler code.
353
354config ARM_CORTEX_CPU_IS_UP
355	bool
356	default n
357
358config USE_ARCH_MEMCPY
359	bool "Use an assembly optimized implementation of memcpy"
360	default y
361	depends on !ARM64
362	help
363	  Enable the generation of an optimized version of memcpy.
364	  Such implementation may be faster under some conditions
365	  but may increase the binary size.
366
367config SPL_USE_ARCH_MEMCPY
368	bool "Use an assembly optimized implementation of memcpy for SPL"
369	default y if USE_ARCH_MEMCPY
370	depends on !ARM64
371	help
372	  Enable the generation of an optimized version of memcpy.
373	  Such implementation may be faster under some conditions
374	  but may increase the binary size.
375
376config USE_ARCH_MEMSET
377	bool "Use an assembly optimized implementation of memset"
378	default y
379	depends on !ARM64
380	help
381	  Enable the generation of an optimized version of memset.
382	  Such implementation may be faster under some conditions
383	  but may increase the binary size.
384
385config SPL_USE_ARCH_MEMSET
386	bool "Use an assembly optimized implementation of memset for SPL"
387	default y if USE_ARCH_MEMSET
388	depends on !ARM64
389	help
390	  Enable the generation of an optimized version of memset.
391	  Such implementation may be faster under some conditions
392	  but may increase the binary size.
393
394config ARM64_SUPPORT_AARCH32
395	bool "ARM64 system support AArch32 execution state"
396	default y if ARM64 && !TARGET_THUNDERX_88XX
397	help
398	  This ARM64 system supports AArch32 execution state.
399
400choice
401	prompt "Target select"
402	default TARGET_HIKEY
403
404config ARCH_AT91
405	bool "Atmel AT91"
406	select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
407
408config TARGET_EDB93XX
409	bool "Support edb93xx"
410	select CPU_ARM920T
411	select PL010_SERIAL
412
413config TARGET_ASPENITE
414	bool "Support aspenite"
415	select CPU_ARM926EJS
416
417config TARGET_GPLUGD
418	bool "Support gplugd"
419	select CPU_ARM926EJS
420
421config ARCH_DAVINCI
422	bool "TI DaVinci"
423	select CPU_ARM926EJS
424	imply CMD_SAVES
425	help
426	  Support for TI's DaVinci platform.
427
428config KIRKWOOD
429	bool "Marvell Kirkwood"
430	select ARCH_MISC_INIT
431	select BOARD_EARLY_INIT_F
432	select CPU_ARM926EJS
433
434config ARCH_MVEBU
435	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
436	select DM
437	select DM_ETH
438	select DM_SERIAL
439	select DM_SPI
440	select DM_SPI_FLASH
441	select OF_CONTROL
442	select OF_SEPARATE
443	select SPI
444	imply CMD_DM
445
446config TARGET_APF27
447	bool "Support apf27"
448	select CPU_ARM926EJS
449	select SUPPORT_SPL
450
451config ORION5X
452	bool "Marvell Orion"
453	select CPU_ARM926EJS
454
455config TARGET_SPEAR300
456	bool "Support spear300"
457	select BOARD_EARLY_INIT_F
458	select CPU_ARM926EJS
459	select PL011_SERIAL
460	imply CMD_SAVES
461
462config TARGET_SPEAR310
463	bool "Support spear310"
464	select BOARD_EARLY_INIT_F
465	select CPU_ARM926EJS
466	select PL011_SERIAL
467	imply CMD_SAVES
468
469config TARGET_SPEAR320
470	bool "Support spear320"
471	select BOARD_EARLY_INIT_F
472	select CPU_ARM926EJS
473	select PL011_SERIAL
474	imply CMD_SAVES
475
476config TARGET_SPEAR600
477	bool "Support spear600"
478	select BOARD_EARLY_INIT_F
479	select CPU_ARM926EJS
480	select PL011_SERIAL
481	imply CMD_SAVES
482
483config TARGET_STV0991
484	bool "Support stv0991"
485	select CPU_V7A
486	select DM
487	select DM_SERIAL
488	select DM_SPI
489	select DM_SPI_FLASH
490	select PL01X_SERIAL
491	select SPI
492	select SPI_FLASH
493	imply CMD_DM
494
495config TARGET_X600
496	bool "Support x600"
497	select BOARD_LATE_INIT
498	select CPU_ARM926EJS
499	select PL011_SERIAL
500	select SUPPORT_SPL
501
502config TARGET_WOODBURN
503	bool "Support woodburn"
504	select CPU_ARM1136
505
506config TARGET_WOODBURN_SD
507	bool "Support woodburn_sd"
508	select CPU_ARM1136
509	select SUPPORT_SPL
510
511config TARGET_FLEA3
512	bool "Support flea3"
513	select CPU_ARM1136
514
515config TARGET_MX35PDK
516	bool "Support mx35pdk"
517	select BOARD_LATE_INIT
518	select CPU_ARM1136
519
520config ARCH_BCM283X
521	bool "Broadcom BCM283X family"
522	select DM
523	select DM_GPIO
524	select DM_SERIAL
525	select OF_CONTROL
526	select PL01X_SERIAL
527	select SERIAL_SEARCH_ALL
528	imply CMD_DM
529	imply FAT_WRITE
530
531config TARGET_VEXPRESS_CA15_TC2
532	bool "Support vexpress_ca15_tc2"
533	select CPU_V7A
534	select CPU_V7_HAS_NONSEC
535	select CPU_V7_HAS_VIRT
536	select PL011_SERIAL
537
538config ARCH_BCMSTB
539	bool "Broadcom BCM7XXX family"
540	select CPU_V7A
541	select DM
542	select OF_CONTROL
543	select OF_PRIOR_STAGE
544	imply CMD_DM
545	help
546	  This enables support for Broadcom ARM-based set-top box
547	  chipsets, including the 7445 family of chips.
548
549config TARGET_VEXPRESS_CA5X2
550	bool "Support vexpress_ca5x2"
551	select CPU_V7A
552	select PL011_SERIAL
553
554config TARGET_VEXPRESS_CA9X4
555	bool "Support vexpress_ca9x4"
556	select CPU_V7A
557	select PL011_SERIAL
558
559config TARGET_BCM23550_W1D
560	bool "Support bcm23550_w1d"
561	select CPU_V7A
562	imply CRC32_VERIFY
563	imply FAT_WRITE
564
565config TARGET_BCM28155_AP
566	bool "Support bcm28155_ap"
567	select CPU_V7A
568	imply CRC32_VERIFY
569	imply FAT_WRITE
570
571config TARGET_BCMCYGNUS
572	bool "Support bcmcygnus"
573	select CPU_V7A
574	imply BCM_SF2_ETH
575	imply BCM_SF2_ETH_GMAC
576	imply CMD_HASH
577	imply CRC32_VERIFY
578	imply FAT_WRITE
579	imply HASH_VERIFY
580	imply NETDEVICES
581
582config TARGET_BCMNSP
583	bool "Support bcmnsp"
584	select CPU_V7A
585
586config TARGET_BCMNS2
587	bool "Support Broadcom Northstar2"
588	select ARM64
589	help
590	  Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
591	  ARMv8 Cortex-A57 processors targeting a broad range of networking
592	  applications
593
594config ARCH_EXYNOS
595	bool "Samsung EXYNOS"
596	select DM
597	select DM_GPIO
598	select DM_I2C
599	select DM_KEYBOARD
600	select DM_SERIAL
601	select DM_SPI
602	select DM_SPI_FLASH
603	select SPI
604	imply CMD_DM
605	imply FAT_WRITE
606
607config ARCH_S5PC1XX
608	bool "Samsung S5PC1XX"
609	select CPU_V7A
610	select DM
611	select DM_GPIO
612	select DM_I2C
613	select DM_SERIAL
614	imply CMD_DM
615
616config ARCH_HIGHBANK
617	bool "Calxeda Highbank"
618	select CPU_V7A
619	select PL011_SERIAL
620
621config ARCH_INTEGRATOR
622	bool "ARM Ltd. Integrator family"
623	select DM
624	select DM_SERIAL
625	select PL01X_SERIAL
626	imply CMD_DM
627
628config ARCH_KEYSTONE
629	bool "TI Keystone"
630	select CMD_POWEROFF
631	select CPU_V7A
632	select SUPPORT_SPL
633	select SYS_ARCH_TIMER
634	select SYS_THUMB_BUILD
635	imply CMD_MTDPARTS
636	imply CMD_SAVES
637	imply FIT
638
639config ARCH_K3
640	bool "Texas Instruments' K3 Architecture"
641	select SPL
642	select SUPPORT_SPL
643	select FIT
644
645config ARCH_OMAP2PLUS
646	bool "TI OMAP2+"
647	select CPU_V7A
648	select SPL_BOARD_INIT if SPL
649	select SPL_STACK_R if SPL
650	select SUPPORT_SPL
651	imply FIT
652
653config ARCH_MESON
654	bool "Amlogic Meson"
655	imply DISTRO_DEFAULTS
656	help
657	  Support for the Meson SoC family developed by Amlogic Inc.,
658	  targeted at media players and tablet computers. We currently
659	  support the S905 (GXBaby) 64-bit SoC.
660
661config ARCH_LPC32XX
662	bool "NXP LPC32xx platform"
663	select CPU_ARM926EJS
664	select DM
665	select DM_GPIO
666	select DM_SERIAL
667	select SPL_DM if SPL
668	select SUPPORT_SPL
669	imply CMD_DM
670
671config ARCH_IMX8
672	bool "NXP i.MX8 platform"
673	select ARM64
674	select DM
675	select OF_CONTROL
676
677config ARCH_MX8M
678	bool "NXP i.MX8M platform"
679	select ARM64
680	select DM
681	select SUPPORT_SPL
682	imply CMD_DM
683
684config ARCH_MX23
685	bool "NXP i.MX23 family"
686	select CPU_ARM926EJS
687	select PL011_SERIAL
688	select SUPPORT_SPL
689
690config ARCH_MX25
691	bool "NXP MX25"
692	select CPU_ARM926EJS
693	imply MXC_GPIO
694
695config ARCH_MX28
696	bool "NXP i.MX28 family"
697	select CPU_ARM926EJS
698	select PL011_SERIAL
699	select SUPPORT_SPL
700
701config ARCH_MX31
702	bool "NXP i.MX31 family"
703	select CPU_ARM1136
704
705config ARCH_MX7ULP
706	bool "NXP MX7ULP"
707	select CPU_V7A
708	select ROM_UNIFIED_SECTIONS
709	imply MXC_GPIO
710
711config ARCH_MX7
712	bool "Freescale MX7"
713	select ARCH_MISC_INIT
714	select BOARD_EARLY_INIT_F
715	select CPU_V7A
716	select SYS_FSL_HAS_SEC if SECURE_BOOT
717	select SYS_FSL_SEC_COMPAT_4
718	select SYS_FSL_SEC_LE
719	imply MXC_GPIO
720
721config ARCH_MX6
722	bool "Freescale MX6"
723	select CPU_V7A
724	select SYS_FSL_HAS_SEC if SECURE_BOOT
725	select SYS_FSL_SEC_COMPAT_4
726	select SYS_FSL_SEC_LE
727	select SYS_THUMB_BUILD if SPL
728	imply MXC_GPIO
729
730if ARCH_MX6
731config SPL_LDSCRIPT
732	default "arch/arm/mach-omap2/u-boot-spl.lds"
733endif
734
735config ARCH_MX5
736	bool "Freescale MX5"
737	select BOARD_EARLY_INIT_F
738	select CPU_V7A
739	imply MXC_GPIO
740
741config ARCH_OWL
742	bool "Actions Semi OWL SoCs"
743	select ARM64
744	select DM
745	select DM_SERIAL
746	select OF_CONTROL
747	imply CMD_DM
748
749config ARCH_QEMU
750	bool "QEMU Virtual Platform"
751	select DM
752	select DM_SERIAL
753	select OF_CONTROL
754	select PL01X_SERIAL
755	imply CMD_DM
756	imply DM_RTC
757	imply RTC_PL031
758
759config ARCH_RMOBILE
760	bool "Renesas ARM SoCs"
761	select BOARD_EARLY_INIT_F
762	select DM
763	select DM_SERIAL
764	imply CMD_DM
765	imply FAT_WRITE
766	imply SYS_THUMB_BUILD
767
768config TARGET_S32V234EVB
769	bool "Support s32v234evb"
770	select ARM64
771	select SYS_FSL_ERRATUM_ESDHC111
772
773config ARCH_SNAPDRAGON
774	bool "Qualcomm Snapdragon SoCs"
775	select ARM64
776	select DM
777	select DM_GPIO
778	select DM_SERIAL
779	select MSM_SMEM
780	select OF_CONTROL
781	select OF_SEPARATE
782	select SMEM
783	select SPMI
784	imply CMD_DM
785
786config ARCH_SOCFPGA
787	bool "Altera SOCFPGA family"
788	select ARCH_EARLY_INIT_R
789	select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
790	select ARM64 if TARGET_SOCFPGA_STRATIX10
791	select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
792	select DM
793	select DM_SERIAL
794	select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
795	select OF_CONTROL
796	select SPL_DM_RESET if DM_RESET
797	select SPL_DM_SERIAL
798	select SPL_LIBCOMMON_SUPPORT
799	select SPL_LIBDISK_SUPPORT
800	select SPL_LIBGENERIC_SUPPORT
801	select SPL_MMC_SUPPORT if DM_MMC
802	select SPL_NAND_SUPPORT if SPL_NAND_DENALI
803	select SPL_OF_CONTROL
804	select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
805	select SPL_SERIAL_SUPPORT
806	select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
807	select SPL_SPI_SUPPORT if DM_SPI
808	select SPL_WATCHDOG_SUPPORT
809	select SUPPORT_SPL
810	select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
811	select SYS_NS16550
812	select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
813	imply CMD_DM
814	imply CMD_MTDPARTS
815	imply CRC32_VERIFY
816	imply DM_SPI
817	imply DM_SPI_FLASH
818	imply FAT_WRITE
819	imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
820
821config ARCH_SUNXI
822	bool "Support sunxi (Allwinner) SoCs"
823	select BINMAN
824	select CMD_GPIO
825	select CMD_MMC if MMC
826	select CMD_USB if DISTRO_DEFAULTS
827	select DM
828	select DM_ETH
829	select DM_GPIO
830	select DM_KEYBOARD
831	select DM_SERIAL
832	select DM_USB if DISTRO_DEFAULTS
833	select OF_BOARD_SETUP
834	select OF_CONTROL
835	select OF_SEPARATE
836	select SPECIFY_CONSOLE_INDEX
837	select SPL_STACK_R if SPL
838	select SPL_SYS_MALLOC_SIMPLE if SPL
839	select SPL_SYS_THUMB_BUILD if !ARM64
840	select SYS_NS16550
841	select SYS_THUMB_BUILD if !ARM64
842	select USB if DISTRO_DEFAULTS
843	select USB_KEYBOARD if DISTRO_DEFAULTS
844	select USB_STORAGE if DISTRO_DEFAULTS
845	select USE_TINY_PRINTF
846	imply CMD_DM
847	imply CMD_GPT
848	imply CMD_UBI if NAND
849	imply DISTRO_DEFAULTS
850	imply FAT_WRITE
851	imply OF_LIBFDT_OVERLAY
852	imply PRE_CONSOLE_BUFFER
853	imply SPL_GPIO_SUPPORT
854	imply SPL_LIBCOMMON_SUPPORT
855	imply SPL_LIBDISK_SUPPORT
856	imply SPL_LIBGENERIC_SUPPORT
857	imply SPL_MMC_SUPPORT if MMC
858	imply SPL_POWER_SUPPORT
859	imply SPL_SERIAL_SUPPORT
860	imply USB_GADGET
861
862config ARCH_VERSAL
863	bool "Support Xilinx Versal Platform"
864	select ARM64
865	select CLK
866	select DM
867	select DM_SERIAL
868	select OF_CONTROL
869
870config ARCH_VF610
871	bool "Freescale Vybrid"
872	select CPU_V7A
873	select SYS_FSL_ERRATUM_ESDHC111
874	imply CMD_MTDPARTS
875	imply NAND
876
877config ARCH_ZYNQ
878	bool "Xilinx Zynq based platform"
879	select BOARD_EARLY_INIT_F if WDT
880	select CLK
881	select CLK_ZYNQ
882	select CPU_V7A
883	select DM
884	select DM_ETH if NET
885	select DM_MMC if MMC
886	select DM_SERIAL
887	select DM_SPI
888	select DM_SPI_FLASH
889	select DM_USB if USB
890	select OF_CONTROL
891	select SPI
892	select SPL_BOARD_INIT if SPL
893	select SPL_CLK if SPL
894	select SPL_DM if SPL
895	select SPL_OF_CONTROL if SPL
896	select SPL_SEPARATE_BSS if SPL
897	select SUPPORT_SPL
898	imply ARCH_EARLY_INIT_R
899	imply BOARD_LATE_INIT
900	imply CMD_CLK
901	imply CMD_DM
902	imply CMD_SPL
903	imply FAT_WRITE
904
905config ARCH_ZYNQMP_R5
906	bool "Xilinx ZynqMP R5 based platform"
907	select CLK
908	select CPU_V7R
909	select DM
910	select DM_SERIAL
911	select OF_CONTROL
912	imply CMD_DM
913
914config ARCH_ZYNQMP
915	bool "Xilinx ZynqMP based platform"
916	select ARM64
917	select CLK
918	select DM
919	select DM_SERIAL
920	select DM_USB if USB
921	select OF_CONTROL
922	select SPL_BOARD_INIT if SPL
923	select SPL_CLK if SPL
924	select SUPPORT_SPL
925	imply BOARD_LATE_INIT
926	imply CMD_DM
927	imply FAT_WRITE
928	imply MP
929
930config TEGRA
931	bool "NVIDIA Tegra"
932	imply DISTRO_DEFAULTS
933	imply FAT_WRITE
934
935config TARGET_VEXPRESS64_AEMV8A
936	bool "Support vexpress_aemv8a"
937	select ARM64
938	select PL01X_SERIAL
939
940config TARGET_VEXPRESS64_BASE_FVP
941	bool "Support Versatile Express ARMv8a FVP BASE model"
942	select ARM64
943	select PL01X_SERIAL
944	select SEMIHOSTING
945
946config TARGET_VEXPRESS64_BASE_FVP_DRAM
947	bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
948	select ARM64
949	select PL01X_SERIAL
950	help
951	  This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
952	  the default config to allow the user to load the images directly into
953	  DRAM using model parameters rather than by using semi-hosting to load
954	  the files from the host filesystem.
955
956config TARGET_VEXPRESS64_JUNO
957	bool "Support Versatile Express Juno Development Platform"
958	select ARM64
959	select PL01X_SERIAL
960
961config TARGET_LS2080A_EMU
962	bool "Support ls2080a_emu"
963	select ARCH_LS2080A
964	select ARCH_MISC_INIT
965	select ARM64
966	select ARMV8_MULTIENTRY
967	help
968	  Support for Freescale LS2080A_EMU platform
969	  The LS2080A Development System (EMULATOR) is a pre silicon
970	  development platform that supports the QorIQ LS2080A
971	  Layerscape Architecture processor.
972
973config TARGET_LS2080A_SIMU
974	bool "Support ls2080a_simu"
975	select ARCH_LS2080A
976	select ARCH_MISC_INIT
977	select ARM64
978	select ARMV8_MULTIENTRY
979	help
980	  Support for Freescale LS2080A_SIMU platform
981	  The LS2080A Development System (QDS) is a pre silicon
982	  development platform that supports the QorIQ LS2080A
983	  Layerscape Architecture processor.
984
985config TARGET_LS1088AQDS
986	bool "Support ls1088aqds"
987	select ARCH_LS1088A
988	select ARCH_MISC_INIT
989	select ARM64
990	select ARMV8_MULTIENTRY
991	select BOARD_LATE_INIT
992	select SUPPORT_SPL
993	help
994	  Support for NXP LS1088AQDS platform
995	  The LS1088A Development System (QDS) is a high-performance
996	  development platform that supports the QorIQ LS1088A
997	  Layerscape Architecture processor.
998
999config TARGET_LS2080AQDS
1000	bool "Support ls2080aqds"
1001	select ARCH_LS2080A
1002	select ARCH_MISC_INIT
1003	select ARM64
1004	select ARMV8_MULTIENTRY
1005	select BOARD_LATE_INIT
1006	select SUPPORT_SPL
1007	imply SCSI
1008	imply SCSI_AHCI
1009	help
1010	  Support for Freescale LS2080AQDS platform
1011	  The LS2080A Development System (QDS) is a high-performance
1012	  development platform that supports the QorIQ LS2080A
1013	  Layerscape Architecture processor.
1014
1015config TARGET_LS2080ARDB
1016	bool "Support ls2080ardb"
1017	select ARCH_LS2080A
1018	select ARCH_MISC_INIT
1019	select ARM64
1020	select ARMV8_MULTIENTRY
1021	select BOARD_LATE_INIT
1022	select SUPPORT_SPL
1023	imply SCSI
1024	imply SCSI_AHCI
1025	help
1026	  Support for Freescale LS2080ARDB platform.
1027	  The LS2080A Reference design board (RDB) is a high-performance
1028	  development platform that supports the QorIQ LS2080A
1029	  Layerscape Architecture processor.
1030
1031config TARGET_LS2081ARDB
1032	bool "Support ls2081ardb"
1033	select ARCH_LS2080A
1034	select ARCH_MISC_INIT
1035	select ARM64
1036	select ARMV8_MULTIENTRY
1037	select BOARD_LATE_INIT
1038	select SUPPORT_SPL
1039	help
1040	  Support for Freescale LS2081ARDB platform.
1041	  The LS2081A Reference design board (RDB) is a high-performance
1042	  development platform that supports the QorIQ LS2081A/LS2041A
1043	  Layerscape Architecture processor.
1044
1045config TARGET_HIKEY
1046	bool "Support HiKey 96boards Consumer Edition Platform"
1047	select ARM64
1048	select DM
1049	select DM_GPIO
1050	select DM_SERIAL
1051	select OF_CONTROL
1052	select PL01X_SERIAL
1053	select SPECIFY_CONSOLE_INDEX
1054	imply CMD_DM
1055	  help
1056	  Support for HiKey 96boards platform. It features a HI6220
1057	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
1058
1059config TARGET_POPLAR
1060	bool "Support Poplar 96boards Enterprise Edition Platform"
1061	select ARM64
1062	select DM
1063	select DM_SERIAL
1064	select DM_USB
1065	select OF_CONTROL
1066	select PL01X_SERIAL
1067	imply CMD_DM
1068	  help
1069	  Support for Poplar 96boards EE platform. It features a HI3798cv200
1070	  SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
1071	  making it capable of running any commercial set-top solution based on
1072	  Linux or Android.
1073
1074config TARGET_LS1012AQDS
1075	bool "Support ls1012aqds"
1076	select ARCH_LS1012A
1077	select ARM64
1078	select BOARD_LATE_INIT
1079	help
1080	  Support for Freescale LS1012AQDS platform.
1081	  The LS1012A Development System (QDS) is a high-performance
1082	  development platform that supports the QorIQ LS1012A
1083	  Layerscape Architecture processor.
1084
1085config TARGET_LS1012ARDB
1086	bool "Support ls1012ardb"
1087	select ARCH_LS1012A
1088	select ARM64
1089	select BOARD_LATE_INIT
1090	imply SCSI
1091	imply SCSI_AHCI
1092	help
1093	  Support for Freescale LS1012ARDB platform.
1094	  The LS1012A Reference design board (RDB) is a high-performance
1095	  development platform that supports the QorIQ LS1012A
1096	  Layerscape Architecture processor.
1097
1098config TARGET_LS1012A2G5RDB
1099	bool "Support ls1012a2g5rdb"
1100	select ARCH_LS1012A
1101	select ARM64
1102	select BOARD_LATE_INIT
1103	imply SCSI
1104	help
1105	  Support for Freescale LS1012A2G5RDB platform.
1106	  The LS1012A 2G5 Reference design board (RDB) is a high-performance
1107	  development platform that supports the QorIQ LS1012A
1108	  Layerscape Architecture processor.
1109
1110config TARGET_LS1012AFRWY
1111	bool "Support ls1012afrwy"
1112	select ARCH_LS1012A
1113	select ARM64
1114	select BOARD_LATE_INIT
1115	imply SCSI
1116	imply SCSI_AHCI
1117	help
1118	 Support for Freescale LS1012AFRWY platform.
1119	 The LS1012A FRWY board (FRWY) is a high-performance
1120	 development platform that supports the QorIQ LS1012A
1121	 Layerscape Architecture processor.
1122
1123config TARGET_LS1012AFRDM
1124	bool "Support ls1012afrdm"
1125	select ARCH_LS1012A
1126	select ARM64
1127	help
1128	  Support for Freescale LS1012AFRDM platform.
1129	  The LS1012A Freedom  board (FRDM) is a high-performance
1130	  development platform that supports the QorIQ LS1012A
1131	  Layerscape Architecture processor.
1132
1133config TARGET_LS1088ARDB
1134	bool "Support ls1088ardb"
1135	select ARCH_LS1088A
1136	select ARCH_MISC_INIT
1137	select ARM64
1138	select ARMV8_MULTIENTRY
1139	select BOARD_LATE_INIT
1140	select SUPPORT_SPL
1141	help
1142	  Support for NXP LS1088ARDB platform.
1143	  The LS1088A Reference design board (RDB) is a high-performance
1144	  development platform that supports the QorIQ LS1088A
1145	  Layerscape Architecture processor.
1146
1147config TARGET_LS1021AQDS
1148	bool "Support ls1021aqds"
1149	select ARCH_LS1021A
1150	select ARCH_SUPPORT_PSCI
1151	select BOARD_EARLY_INIT_F
1152	select BOARD_LATE_INIT
1153	select CPU_V7A
1154	select CPU_V7_HAS_NONSEC
1155	select CPU_V7_HAS_VIRT
1156	select LS1_DEEP_SLEEP
1157	select SUPPORT_SPL
1158	select SYS_FSL_DDR
1159	imply SCSI
1160
1161config TARGET_LS1021ATWR
1162	bool "Support ls1021atwr"
1163	select ARCH_LS1021A
1164	select ARCH_SUPPORT_PSCI
1165	select BOARD_EARLY_INIT_F
1166	select BOARD_LATE_INIT
1167	select CPU_V7A
1168	select CPU_V7_HAS_NONSEC
1169	select CPU_V7_HAS_VIRT
1170	select LS1_DEEP_SLEEP
1171	select SUPPORT_SPL
1172	imply SCSI
1173
1174config TARGET_LS1021AIOT
1175	bool "Support ls1021aiot"
1176	select ARCH_LS1021A
1177	select ARCH_SUPPORT_PSCI
1178	select BOARD_LATE_INIT
1179	select CPU_V7A
1180	select CPU_V7_HAS_NONSEC
1181	select CPU_V7_HAS_VIRT
1182	select SUPPORT_SPL
1183	imply SCSI
1184	help
1185	  Support for Freescale LS1021AIOT platform.
1186	  The LS1021A Freescale board (IOT) is a high-performance
1187	  development platform that supports the QorIQ LS1021A
1188	  Layerscape Architecture processor.
1189
1190config TARGET_LS1043AQDS
1191	bool "Support ls1043aqds"
1192	select ARCH_LS1043A
1193	select ARM64
1194	select ARMV8_MULTIENTRY
1195	select BOARD_EARLY_INIT_F
1196	select BOARD_LATE_INIT
1197	select SUPPORT_SPL
1198	imply SCSI
1199	help
1200	  Support for Freescale LS1043AQDS platform.
1201
1202config TARGET_LS1043ARDB
1203	bool "Support ls1043ardb"
1204	select ARCH_LS1043A
1205	select ARM64
1206	select ARMV8_MULTIENTRY
1207	select BOARD_EARLY_INIT_F
1208	select BOARD_LATE_INIT
1209	select SUPPORT_SPL
1210	imply SCSI
1211	help
1212	  Support for Freescale LS1043ARDB platform.
1213
1214config TARGET_LS1046AQDS
1215	bool "Support ls1046aqds"
1216	select ARCH_LS1046A
1217	select ARM64
1218	select ARMV8_MULTIENTRY
1219	select BOARD_EARLY_INIT_F
1220	select BOARD_LATE_INIT
1221	select DM_SPI_FLASH if DM_SPI
1222	select SUPPORT_SPL
1223	imply SCSI
1224	help
1225	  Support for Freescale LS1046AQDS platform.
1226	  The LS1046A Development System (QDS) is a high-performance
1227	  development platform that supports the QorIQ LS1046A
1228	  Layerscape Architecture processor.
1229
1230config TARGET_LS1046ARDB
1231	bool "Support ls1046ardb"
1232	select ARCH_LS1046A
1233	select ARM64
1234	select ARMV8_MULTIENTRY
1235	select BOARD_EARLY_INIT_F
1236	select BOARD_LATE_INIT
1237	select DM_SPI_FLASH if DM_SPI
1238	select POWER_MC34VR500
1239	select SUPPORT_SPL
1240	imply SCSI
1241	help
1242	  Support for Freescale LS1046ARDB platform.
1243	  The LS1046A Reference Design Board (RDB) is a high-performance
1244	  development platform that supports the QorIQ LS1046A
1245	  Layerscape Architecture processor.
1246
1247config TARGET_H2200
1248	bool "Support h2200"
1249	select CPU_PXA
1250
1251config TARGET_ZIPITZ2
1252	bool "Support zipitz2"
1253	select CPU_PXA
1254
1255config TARGET_COLIBRI_PXA270
1256	bool "Support colibri_pxa270"
1257	select CPU_PXA
1258
1259config ARCH_UNIPHIER
1260	bool "Socionext UniPhier SoCs"
1261	select BOARD_LATE_INIT
1262	select DM
1263	select DM_GPIO
1264	select DM_I2C
1265	select DM_MMC
1266	select DM_RESET
1267	select DM_SERIAL
1268	select DM_USB
1269	select OF_BOARD_SETUP
1270	select OF_CONTROL
1271	select OF_LIBFDT
1272	select PINCTRL
1273	select SPL_BOARD_INIT if SPL
1274	select SPL_DM if SPL
1275	select SPL_LIBCOMMON_SUPPORT if SPL
1276	select SPL_LIBGENERIC_SUPPORT if SPL
1277	select SPL_OF_CONTROL if SPL
1278	select SPL_PINCTRL if SPL
1279	select SUPPORT_SPL
1280	imply CMD_DM
1281	imply DISTRO_DEFAULTS
1282	imply FAT_WRITE
1283	help
1284	  Support for UniPhier SoC family developed by Socionext Inc.
1285	  (formerly, System LSI Business Division of Panasonic Corporation)
1286
1287config STM32
1288	bool "Support STMicroelectronics STM32 MCU with cortex M"
1289	select CPU_V7M
1290	select DM
1291	select DM_SERIAL
1292	imply CMD_DM
1293
1294config ARCH_STI
1295	bool "Support STMicrolectronics SoCs"
1296	select BLK
1297	select CPU_V7A
1298	select DM
1299	select DM_MMC
1300	select DM_RESET
1301	select DM_SERIAL
1302	imply CMD_DM
1303	help
1304	  Support for STMicroelectronics STiH407/10 SoC family.
1305	  This SoC is used on Linaro 96Board STiH410-B2260
1306
1307config ARCH_STM32MP
1308	bool "Support STMicroelectronics STM32MP Socs with cortex A"
1309	select ARCH_MISC_INIT
1310	select BOARD_LATE_INIT
1311	select CLK
1312	select DM
1313	select DM_GPIO
1314	select DM_RESET
1315	select DM_SERIAL
1316	select MISC
1317	select OF_CONTROL
1318	select OF_LIBFDT
1319	select PINCTRL
1320	select REGMAP
1321	select SUPPORT_SPL
1322	select SYSCON
1323	select SYSRESET
1324	select SYS_THUMB_BUILD
1325	imply CMD_DM
1326	help
1327	  Support for STM32MP SoC family developed by STMicroelectronics,
1328	  MPUs based on ARM cortex A core
1329	  U-BOOT is running in DDR and SPL support is the unsecure First Stage
1330	  BootLoader (FSBL)
1331
1332config ARCH_ROCKCHIP
1333	bool "Support Rockchip SoCs"
1334	select BLK
1335	select DM
1336	select DM_GPIO
1337	select DM_I2C
1338	select DM_MMC
1339	select DM_PWM
1340	select DM_REGULATOR
1341	select DM_SERIAL
1342	select DM_SPI
1343	select DM_SPI_FLASH
1344	select DM_USB if USB
1345	select ENABLE_ARM_SOC_BOOT0_HOOK
1346	select OF_CONTROL
1347	select SPI
1348	select SPL_DM if SPL
1349	select SPL_SYS_MALLOC_SIMPLE if SPL
1350	select SYS_MALLOC_F
1351	select SYS_THUMB_BUILD if !ARM64
1352	imply ADC
1353	imply CMD_DM
1354	imply DISTRO_DEFAULTS
1355	imply FAT_WRITE
1356	imply SARADC_ROCKCHIP
1357	imply SPL_SYSRESET
1358	imply SYS_NS16550
1359	imply TPL_SYSRESET
1360	imply USB_FUNCTION_FASTBOOT
1361
1362config TARGET_THUNDERX_88XX
1363	bool "Support ThunderX 88xx"
1364	select ARM64
1365	select OF_CONTROL
1366	select PL01X_SERIAL
1367	select SYS_CACHE_SHIFT_7
1368
1369config ARCH_ASPEED
1370	bool "Support Aspeed SoCs"
1371	select DM
1372	select OF_CONTROL
1373	imply CMD_DM
1374
1375endchoice
1376
1377config TI_SECURE_DEVICE
1378	bool "HS Device Type Support"
1379	depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
1380	help
1381	  If a high secure (HS) device type is being used, this config
1382	  must be set. This option impacts various aspects of the
1383	  build system (to create signed boot images that can be
1384	  authenticated) and the code. See the doc/README.ti-secure
1385	  file for further details.
1386
1387source "arch/arm/mach-aspeed/Kconfig"
1388
1389source "arch/arm/mach-at91/Kconfig"
1390
1391source "arch/arm/mach-bcm283x/Kconfig"
1392
1393source "arch/arm/mach-bcmstb/Kconfig"
1394
1395source "arch/arm/mach-davinci/Kconfig"
1396
1397source "arch/arm/mach-exynos/Kconfig"
1398
1399source "arch/arm/mach-highbank/Kconfig"
1400
1401source "arch/arm/mach-integrator/Kconfig"
1402
1403source "arch/arm/mach-k3/Kconfig"
1404
1405source "arch/arm/mach-keystone/Kconfig"
1406
1407source "arch/arm/mach-kirkwood/Kconfig"
1408
1409source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig"
1410
1411source "arch/arm/mach-mvebu/Kconfig"
1412
1413source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1414
1415source "arch/arm/mach-imx/mx2/Kconfig"
1416
1417source "arch/arm/mach-imx/mx3/Kconfig"
1418
1419source "arch/arm/mach-imx/mx5/Kconfig"
1420
1421source "arch/arm/mach-imx/mx6/Kconfig"
1422
1423source "arch/arm/mach-imx/mx7/Kconfig"
1424
1425source "arch/arm/mach-imx/mx7ulp/Kconfig"
1426
1427source "arch/arm/mach-imx/imx8/Kconfig"
1428
1429source "arch/arm/mach-imx/mx8m/Kconfig"
1430
1431source "arch/arm/mach-imx/mxs/Kconfig"
1432
1433source "arch/arm/mach-omap2/Kconfig"
1434
1435source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1436
1437source "arch/arm/mach-orion5x/Kconfig"
1438
1439source "arch/arm/mach-owl/Kconfig"
1440
1441source "arch/arm/mach-rmobile/Kconfig"
1442
1443source "arch/arm/mach-meson/Kconfig"
1444
1445source "arch/arm/mach-qemu/Kconfig"
1446
1447source "arch/arm/mach-rockchip/Kconfig"
1448
1449source "arch/arm/mach-s5pc1xx/Kconfig"
1450
1451source "arch/arm/mach-snapdragon/Kconfig"
1452
1453source "arch/arm/mach-socfpga/Kconfig"
1454
1455source "arch/arm/mach-sti/Kconfig"
1456
1457source "arch/arm/mach-stm32/Kconfig"
1458
1459source "arch/arm/mach-stm32mp/Kconfig"
1460
1461source "arch/arm/mach-sunxi/Kconfig"
1462
1463source "arch/arm/mach-tegra/Kconfig"
1464
1465source "arch/arm/mach-uniphier/Kconfig"
1466
1467source "arch/arm/cpu/armv7/vf610/Kconfig"
1468
1469source "arch/arm/mach-zynq/Kconfig"
1470
1471source "arch/arm/mach-versal/Kconfig"
1472
1473source "arch/arm/mach-zynqmp-r5/Kconfig"
1474
1475source "arch/arm/cpu/armv7/Kconfig"
1476
1477source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1478
1479source "arch/arm/cpu/armv8/Kconfig"
1480
1481source "arch/arm/mach-imx/Kconfig"
1482
1483source "board/bosch/shc/Kconfig"
1484source "board/CarMediaLab/flea3/Kconfig"
1485source "board/Marvell/aspenite/Kconfig"
1486source "board/Marvell/gplugd/Kconfig"
1487source "board/armadeus/apf27/Kconfig"
1488source "board/armltd/vexpress/Kconfig"
1489source "board/armltd/vexpress64/Kconfig"
1490source "board/broadcom/bcm23550_w1d/Kconfig"
1491source "board/broadcom/bcm28155_ap/Kconfig"
1492source "board/broadcom/bcmcygnus/Kconfig"
1493source "board/broadcom/bcmnsp/Kconfig"
1494source "board/broadcom/bcmns2/Kconfig"
1495source "board/cavium/thunderx/Kconfig"
1496source "board/cirrus/edb93xx/Kconfig"
1497source "board/eets/pdu001/Kconfig"
1498source "board/freescale/ls2080a/Kconfig"
1499source "board/freescale/ls2080aqds/Kconfig"
1500source "board/freescale/ls2080ardb/Kconfig"
1501source "board/freescale/ls1088a/Kconfig"
1502source "board/freescale/ls1021aqds/Kconfig"
1503source "board/freescale/ls1043aqds/Kconfig"
1504source "board/freescale/ls1021atwr/Kconfig"
1505source "board/freescale/ls1021aiot/Kconfig"
1506source "board/freescale/ls1046aqds/Kconfig"
1507source "board/freescale/ls1043ardb/Kconfig"
1508source "board/freescale/ls1046ardb/Kconfig"
1509source "board/freescale/ls1012aqds/Kconfig"
1510source "board/freescale/ls1012ardb/Kconfig"
1511source "board/freescale/ls1012afrdm/Kconfig"
1512source "board/freescale/mx35pdk/Kconfig"
1513source "board/freescale/s32v234evb/Kconfig"
1514source "board/grinn/chiliboard/Kconfig"
1515source "board/gumstix/pepper/Kconfig"
1516source "board/h2200/Kconfig"
1517source "board/hisilicon/hikey/Kconfig"
1518source "board/hisilicon/poplar/Kconfig"
1519source "board/isee/igep003x/Kconfig"
1520source "board/phytec/pcm051/Kconfig"
1521source "board/silica/pengwyn/Kconfig"
1522source "board/spear/spear300/Kconfig"
1523source "board/spear/spear310/Kconfig"
1524source "board/spear/spear320/Kconfig"
1525source "board/spear/spear600/Kconfig"
1526source "board/spear/x600/Kconfig"
1527source "board/st/stv0991/Kconfig"
1528source "board/tcl/sl50/Kconfig"
1529source "board/ucRobotics/bubblegum_96/Kconfig"
1530source "board/birdland/bav335x/Kconfig"
1531source "board/toradex/colibri_pxa270/Kconfig"
1532source "board/vscom/baltos/Kconfig"
1533source "board/woodburn/Kconfig"
1534source "board/xilinx/Kconfig"
1535source "board/xilinx/zynq/Kconfig"
1536source "board/xilinx/zynqmp/Kconfig"
1537source "board/zipitz2/Kconfig"
1538
1539source "arch/arm/Kconfig.debug"
1540
1541endmenu
1542
1543config SPL_LDSCRIPT
1544	default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
1545	default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1546	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
1547
1548
1549