1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# If set, the workarounds for these ARM errata are applied early during U-Boot 23# startup. Note that in general these options force the workarounds to be 24# applied; no CPU-type/version detection exists, unlike the similar options in 25# the Linux kernel. Do not set these options unless they apply! Also note that 26# the following can be machine specific errata. These do have ability to 27# provide rudimentary version and machine specific checks, but expect no 28# product checks: 29# CONFIG_ARM_ERRATA_430973 30# CONFIG_ARM_ERRATA_454179 31# CONFIG_ARM_ERRATA_621766 32# CONFIG_ARM_ERRATA_798870 33# CONFIG_ARM_ERRATA_801819 34config ARM_ERRATA_430973 35 bool 36 37config ARM_ERRATA_454179 38 bool 39 40config ARM_ERRATA_621766 41 bool 42 43config ARM_ERRATA_716044 44 bool 45 46config ARM_ERRATA_725233 47 bool 48 49config ARM_ERRATA_742230 50 bool 51 52config ARM_ERRATA_743622 53 bool 54 55config ARM_ERRATA_751472 56 bool 57 58config ARM_ERRATA_761320 59 bool 60 61config ARM_ERRATA_773022 62 bool 63 64config ARM_ERRATA_774769 65 bool 66 67config ARM_ERRATA_794072 68 bool 69 70config ARM_ERRATA_798870 71 bool 72 73config ARM_ERRATA_801819 74 bool 75 76config ARM_ERRATA_826974 77 bool 78 79config ARM_ERRATA_828024 80 bool 81 82config ARM_ERRATA_829520 83 bool 84 85config ARM_ERRATA_833069 86 bool 87 88config ARM_ERRATA_833471 89 bool 90 91config CPU_ARM720T 92 bool 93 select SYS_CACHE_SHIFT_5 94 95config CPU_ARM920T 96 bool 97 select SYS_CACHE_SHIFT_5 98 99config CPU_ARM926EJS 100 bool 101 select SYS_CACHE_SHIFT_5 102 103config CPU_ARM946ES 104 bool 105 select SYS_CACHE_SHIFT_5 106 107config CPU_ARM1136 108 bool 109 select SYS_CACHE_SHIFT_5 110 111config CPU_ARM1176 112 bool 113 select HAS_VBAR 114 select SYS_CACHE_SHIFT_5 115 116config CPU_V7 117 bool 118 select HAS_VBAR 119 select HAS_THUMB2 120 select SYS_CACHE_SHIFT_6 121 122config CPU_V7M 123 bool 124 select HAS_THUMB2 125 select SYS_CACHE_SHIFT_5 126 127config CPU_PXA 128 bool 129 select SYS_CACHE_SHIFT_5 130 131config CPU_SA1100 132 bool 133 select SYS_CACHE_SHIFT_5 134 135config SYS_CPU 136 default "arm720t" if CPU_ARM720T 137 default "arm920t" if CPU_ARM920T 138 default "arm926ejs" if CPU_ARM926EJS 139 default "arm946es" if CPU_ARM946ES 140 default "arm1136" if CPU_ARM1136 141 default "arm1176" if CPU_ARM1176 142 default "armv7" if CPU_V7 143 default "armv7m" if CPU_V7M 144 default "pxa" if CPU_PXA 145 default "sa1100" if CPU_SA1100 146 default "armv8" if ARM64 147 148config SYS_ARM_ARCH 149 int 150 default 4 if CPU_ARM720T 151 default 4 if CPU_ARM920T 152 default 5 if CPU_ARM926EJS 153 default 5 if CPU_ARM946ES 154 default 6 if CPU_ARM1136 155 default 6 if CPU_ARM1176 156 default 7 if CPU_V7 157 default 7 if CPU_V7M 158 default 5 if CPU_PXA 159 default 4 if CPU_SA1100 160 default 8 if ARM64 161 162config SYS_CACHE_SHIFT_5 163 bool 164 165config SYS_CACHE_SHIFT_6 166 bool 167 168config SYS_CACHE_SHIFT_7 169 bool 170 171config SYS_CACHELINE_SIZE 172 int 173 default 128 if SYS_CACHE_SHIFT_7 174 default 64 if SYS_CACHE_SHIFT_6 175 default 32 if SYS_CACHE_SHIFT_5 176 177config SEMIHOSTING 178 bool "support boot from semihosting" 179 help 180 In emulated environments, semihosting is a way for 181 the hosted environment to call out to the emulator to 182 retrieve files from the host machine. 183 184config SYS_L2CACHE_OFF 185 bool "L2cache off" 186 help 187 If SoC does not support L2CACHE or one do not want to enable 188 L2CACHE, choose this option. 189 190config ENABLE_ARM_SOC_BOOT0_HOOK 191 bool "prepare BOOT0 header" 192 help 193 If the SoC's BOOT0 requires a header area filled with (magic) 194 values, then choose this option, and create a define called 195 ARM_SOC_BOOT0_HOOK which contains the required assembler 196 preprocessor code. 197 198config USE_ARCH_MEMCPY 199 bool "Use an assembly optimized implementation of memcpy" 200 default y 201 depends on !ARM64 202 help 203 Enable the generation of an optimized version of memcpy. 204 Such implementation may be faster under some conditions 205 but may increase the binary size. 206 207config SPL_USE_ARCH_MEMCPY 208 bool "Use an assembly optimized implementation of memcpy" 209 default y if USE_ARCH_MEMCPY 210 depends on !ARM64 211 help 212 Enable the generation of an optimized version of memcpy. 213 Such implementation may be faster under some conditions 214 but may increase the binary size. 215 216config USE_ARCH_MEMSET 217 bool "Use an assembly optimized implementation of memset" 218 default y 219 depends on !ARM64 220 help 221 Enable the generation of an optimized version of memset. 222 Such implementation may be faster under some conditions 223 but may increase the binary size. 224 225config SPL_USE_ARCH_MEMSET 226 bool "Use an assembly optimized implementation of memset" 227 default y if USE_ARCH_MEMSET 228 depends on !ARM64 229 help 230 Enable the generation of an optimized version of memset. 231 Such implementation may be faster under some conditions 232 but may increase the binary size. 233 234config ARCH_OMAP2 235 bool 236 select CPU_V7 237 select SUPPORT_SPL 238 239config ARM64_SUPPORT_AARCH32 240 bool "ARM64 system support AArch32 execution state" 241 default y if ARM64 && !TARGET_THUNDERX_88XX 242 help 243 This ARM64 system supports AArch32 execution state. 244 245choice 246 prompt "Target select" 247 default TARGET_HIKEY 248 249config ARCH_AT91 250 bool "Atmel AT91" 251 252config TARGET_EDB93XX 253 bool "Support edb93xx" 254 select CPU_ARM920T 255 256config TARGET_ASPENITE 257 bool "Support aspenite" 258 select CPU_ARM926EJS 259 260config TARGET_GPLUGD 261 bool "Support gplugd" 262 select CPU_ARM926EJS 263 264config ARCH_DAVINCI 265 bool "TI DaVinci" 266 select CPU_ARM926EJS 267 help 268 Support for TI's DaVinci platform. 269 270config KIRKWOOD 271 bool "Marvell Kirkwood" 272 select CPU_ARM926EJS 273 select BOARD_EARLY_INIT_F 274 select ARCH_MISC_INIT 275 276config ARCH_MVEBU 277 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 278 select OF_CONTROL 279 select OF_SEPARATE 280 select DM 281 select DM_ETH 282 select DM_SERIAL 283 select DM_SPI 284 select DM_SPI_FLASH 285 286config TARGET_DEVKIT3250 287 bool "Support devkit3250" 288 select CPU_ARM926EJS 289 select SUPPORT_SPL 290 291config TARGET_WORK_92105 292 bool "Support work_92105" 293 select CPU_ARM926EJS 294 select SUPPORT_SPL 295 296config TARGET_MX25PDK 297 bool "Support mx25pdk" 298 select BOARD_LATE_INIT 299 select CPU_ARM926EJS 300 select BOARD_EARLY_INIT_F 301 302config TARGET_ZMX25 303 bool "Support zmx25" 304 select BOARD_LATE_INIT 305 select CPU_ARM926EJS 306 307config TARGET_APF27 308 bool "Support apf27" 309 select CPU_ARM926EJS 310 select SUPPORT_SPL 311 312config TARGET_APX4DEVKIT 313 bool "Support apx4devkit" 314 select CPU_ARM926EJS 315 select SUPPORT_SPL 316 317config TARGET_XFI3 318 bool "Support xfi3" 319 select CPU_ARM926EJS 320 select SUPPORT_SPL 321 322config TARGET_M28EVK 323 bool "Support m28evk" 324 select CPU_ARM926EJS 325 select SUPPORT_SPL 326 327config TARGET_MX23EVK 328 bool "Support mx23evk" 329 select CPU_ARM926EJS 330 select SUPPORT_SPL 331 select BOARD_EARLY_INIT_F 332 333config TARGET_MX28EVK 334 bool "Support mx28evk" 335 select CPU_ARM926EJS 336 select SUPPORT_SPL 337 select BOARD_EARLY_INIT_F 338 339config TARGET_MX23_OLINUXINO 340 bool "Support mx23_olinuxino" 341 select CPU_ARM926EJS 342 select SUPPORT_SPL 343 select BOARD_EARLY_INIT_F 344 345config TARGET_BG0900 346 bool "Support bg0900" 347 select CPU_ARM926EJS 348 select SUPPORT_SPL 349 350config TARGET_SANSA_FUZE_PLUS 351 bool "Support sansa_fuze_plus" 352 select CPU_ARM926EJS 353 select SUPPORT_SPL 354 355config TARGET_SC_SPS_1 356 bool "Support sc_sps_1" 357 select CPU_ARM926EJS 358 select SUPPORT_SPL 359 360config ORION5X 361 bool "Marvell Orion" 362 select CPU_ARM926EJS 363 364config TARGET_SPEAR300 365 bool "Support spear300" 366 select CPU_ARM926EJS 367 select BOARD_EARLY_INIT_F 368 369config TARGET_SPEAR310 370 bool "Support spear310" 371 select CPU_ARM926EJS 372 select BOARD_EARLY_INIT_F 373 374config TARGET_SPEAR320 375 bool "Support spear320" 376 select CPU_ARM926EJS 377 select BOARD_EARLY_INIT_F 378 379config TARGET_SPEAR600 380 bool "Support spear600" 381 select CPU_ARM926EJS 382 select BOARD_EARLY_INIT_F 383 384config TARGET_STV0991 385 bool "Support stv0991" 386 select CPU_V7 387 select DM 388 select DM_SERIAL 389 select DM_SPI 390 select DM_SPI_FLASH 391 select SPI_FLASH 392 393config TARGET_X600 394 bool "Support x600" 395 select BOARD_LATE_INIT 396 select CPU_ARM926EJS 397 select SUPPORT_SPL 398 399config TARGET_IMX31_PHYCORE 400 bool "Support imx31_phycore_eet" 401 select CPU_ARM1136 402 select BOARD_EARLY_INIT_F 403 404config TARGET_IMX31_PHYCORE_EET 405 bool "Support imx31_phycore_eet" 406 select BOARD_LATE_INIT 407 select CPU_ARM1136 408 select BOARD_EARLY_INIT_F 409 410config TARGET_MX31ADS 411 bool "Support mx31ads" 412 select CPU_ARM1136 413 select BOARD_EARLY_INIT_F 414 415config TARGET_MX31PDK 416 bool "Support mx31pdk" 417 select BOARD_LATE_INIT 418 select CPU_ARM1136 419 select SUPPORT_SPL 420 select BOARD_EARLY_INIT_F 421 422config TARGET_WOODBURN 423 bool "Support woodburn" 424 select CPU_ARM1136 425 426config TARGET_WOODBURN_SD 427 bool "Support woodburn_sd" 428 select CPU_ARM1136 429 select SUPPORT_SPL 430 431config TARGET_FLEA3 432 bool "Support flea3" 433 select CPU_ARM1136 434 435config TARGET_MX35PDK 436 bool "Support mx35pdk" 437 select BOARD_LATE_INIT 438 select CPU_ARM1136 439 440config ARCH_BCM283X 441 bool "Broadcom BCM283X family" 442 select DM 443 select DM_SERIAL 444 select DM_GPIO 445 select OF_CONTROL 446 447config TARGET_VEXPRESS_CA15_TC2 448 bool "Support vexpress_ca15_tc2" 449 select CPU_V7 450 select CPU_V7_HAS_NONSEC 451 select CPU_V7_HAS_VIRT 452 453config TARGET_VEXPRESS_CA5X2 454 bool "Support vexpress_ca5x2" 455 select CPU_V7 456 457config TARGET_VEXPRESS_CA9X4 458 bool "Support vexpress_ca9x4" 459 select CPU_V7 460 461config TARGET_BRXRE1 462 bool "Support BRXRE1" 463 select ARCH_OMAP2 464 select BOARD_LATE_INIT 465 466config TARGET_BRPPT1 467 bool "Support BRPPT1" 468 select ARCH_OMAP2 469 select BOARD_LATE_INIT 470 471config TARGET_DRACO 472 bool "Support draco" 473 select ARCH_OMAP2 474 select BOARD_LATE_INIT 475 select DM 476 select DM_SERIAL 477 select DM_GPIO 478 479config TARGET_THUBAN 480 bool "Support thuban" 481 select ARCH_OMAP2 482 select BOARD_LATE_INIT 483 select DM 484 select DM_SERIAL 485 select DM_GPIO 486 487config TARGET_RASTABAN 488 bool "Support rastaban" 489 select ARCH_OMAP2 490 select BOARD_LATE_INIT 491 select DM 492 select DM_SERIAL 493 select DM_GPIO 494 495config TARGET_ETAMIN 496 bool "Support etamin" 497 select ARCH_OMAP2 498 select BOARD_LATE_INIT 499 select DM 500 select DM_SERIAL 501 select DM_GPIO 502 503config TARGET_PXM2 504 bool "Support pxm2" 505 select ARCH_OMAP2 506 select BOARD_LATE_INIT 507 select DM 508 select DM_SERIAL 509 select DM_GPIO 510 511config TARGET_RUT 512 bool "Support rut" 513 select ARCH_OMAP2 514 select BOARD_LATE_INIT 515 select DM 516 select DM_SERIAL 517 select DM_GPIO 518 519config TARGET_TI814X_EVM 520 bool "Support ti814x_evm" 521 select ARCH_OMAP2 522 523config TARGET_TI816X_EVM 524 bool "Support ti816x_evm" 525 select ARCH_OMAP2 526 527config TARGET_BCM23550_W1D 528 bool "Support bcm23550_w1d" 529 select CPU_V7 530 531config TARGET_BCM28155_AP 532 bool "Support bcm28155_ap" 533 select CPU_V7 534 535config TARGET_BCMCYGNUS 536 bool "Support bcmcygnus" 537 select CPU_V7 538 539config TARGET_BCMNSP 540 bool "Support bcmnsp" 541 select CPU_V7 542 543config ARCH_EXYNOS 544 bool "Samsung EXYNOS" 545 select DM 546 select DM_I2C 547 select DM_SPI_FLASH 548 select DM_SERIAL 549 select DM_SPI 550 select DM_GPIO 551 select DM_KEYBOARD 552 553config ARCH_S5PC1XX 554 bool "Samsung S5PC1XX" 555 select CPU_V7 556 select DM 557 select DM_SERIAL 558 select DM_GPIO 559 select DM_I2C 560 561config ARCH_HIGHBANK 562 bool "Calxeda Highbank" 563 select CPU_V7 564 565config ARCH_INTEGRATOR 566 bool "ARM Ltd. Integrator family" 567 select DM 568 select DM_SERIAL 569 570config ARCH_KEYSTONE 571 bool "TI Keystone" 572 select CPU_V7 573 select SUPPORT_SPL 574 select CMD_POWEROFF 575 576config ARCH_MESON 577 bool "Amlogic Meson" 578 help 579 Support for the Meson SoC family developed by Amlogic Inc., 580 targeted at media players and tablet computers. We currently 581 support the S905 (GXBaby) 64-bit SoC. 582 583config ARCH_MX7 584 bool "Freescale MX7" 585 select CPU_V7 586 select SYS_FSL_HAS_SEC if SECURE_BOOT 587 select SYS_FSL_SEC_COMPAT_4 588 select SYS_FSL_SEC_LE 589 select BOARD_EARLY_INIT_F 590 select ARCH_MISC_INIT 591 592config ARCH_MX6 593 bool "Freescale MX6" 594 select CPU_V7 595 select SYS_FSL_HAS_SEC if SECURE_BOOT 596 select SYS_FSL_SEC_COMPAT_4 597 select SYS_FSL_SEC_LE 598 599config ARCH_MX5 600 bool "Freescale MX5" 601 select CPU_V7 602 select BOARD_EARLY_INIT_F 603 604config TARGET_M53EVK 605 bool "Support m53evk" 606 select CPU_V7 607 select SUPPORT_SPL 608 select BOARD_EARLY_INIT_F 609 610config TARGET_MX51EVK 611 bool "Support mx51evk" 612 select BOARD_LATE_INIT 613 select CPU_V7 614 select BOARD_EARLY_INIT_F 615 616config TARGET_MX53ARD 617 bool "Support mx53ard" 618 select CPU_V7 619 select BOARD_EARLY_INIT_F 620 621config TARGET_MX53EVK 622 bool "Support mx53evk" 623 select BOARD_LATE_INIT 624 select CPU_V7 625 select BOARD_EARLY_INIT_F 626 627config TARGET_MX53LOCO 628 bool "Support mx53loco" 629 select BOARD_LATE_INIT 630 select CPU_V7 631 select BOARD_EARLY_INIT_F 632 633config TARGET_MX53SMD 634 bool "Support mx53smd" 635 select CPU_V7 636 select BOARD_EARLY_INIT_F 637 638config OMAP34XX 639 bool "OMAP34XX SoC" 640 select ARCH_OMAP2 641 select ARM_ERRATA_430973 642 select ARM_ERRATA_454179 643 select ARM_ERRATA_621766 644 select ARM_ERRATA_725233 645 select USE_TINY_PRINTF 646 imply SPL_EXT_SUPPORT 647 imply SPL_FAT_SUPPORT 648 imply SPL_GPIO_SUPPORT 649 imply SPL_I2C_SUPPORT 650 imply SPL_LIBCOMMON_SUPPORT 651 imply SPL_LIBDISK_SUPPORT 652 imply SPL_LIBGENERIC_SUPPORT 653 imply SPL_MMC_SUPPORT 654 imply SPL_NAND_SUPPORT 655 imply SPL_POWER_SUPPORT 656 imply SPL_SERIAL_SUPPORT 657 658config OMAP44XX 659 bool "OMAP44XX SoC" 660 select ARCH_OMAP2 661 select USE_TINY_PRINTF 662 imply SPL_DISPLAY_PRINT 663 imply SPL_EXT_SUPPORT 664 imply SPL_FAT_SUPPORT 665 imply SPL_GPIO_SUPPORT 666 imply SPL_I2C_SUPPORT 667 imply SPL_LIBCOMMON_SUPPORT 668 imply SPL_LIBDISK_SUPPORT 669 imply SPL_LIBGENERIC_SUPPORT 670 imply SPL_MMC_SUPPORT 671 imply SPL_NAND_SUPPORT 672 imply SPL_POWER_SUPPORT 673 imply SPL_SERIAL_SUPPORT 674 675config OMAP54XX 676 bool "OMAP54XX SoC" 677 select ARCH_OMAP2 678 select ARM_ERRATA_798870 679 imply SPL_DISPLAY_PRINT 680 imply SPL_ENV_SUPPORT 681 imply SPL_EXT_SUPPORT 682 imply SPL_FAT_SUPPORT 683 imply SPL_GPIO_SUPPORT 684 imply SPL_I2C_SUPPORT 685 imply SPL_LIBCOMMON_SUPPORT 686 imply SPL_LIBDISK_SUPPORT 687 imply SPL_LIBGENERIC_SUPPORT 688 imply SPL_MMC_SUPPORT 689 imply SPL_NAND_SUPPORT 690 imply SPL_POWER_SUPPORT 691 imply SPL_SERIAL_SUPPORT 692 693config AM43XX 694 bool "AM43XX SoC" 695 select ARCH_OMAP2 696 help 697 Support for AM43xx SOC from Texas Instruments. 698 The AM43xx high performance SOC features a Cortex-A9 699 ARM core, a quad core PRU-ICSS for industrial Ethernet 700 protocols, dual camera support, optional 3D graphics 701 and an optional customer programmable secure boot. 702 703config AM33XX 704 bool "AM33XX SoC" 705 select ARCH_OMAP2 706 help 707 Support for AM335x SOC from Texas Instruments. 708 The AM335x high performance SOC features a Cortex-A8 709 ARM core, a dual core PRU-ICSS for industrial Ethernet 710 protocols, optional 3D graphics and an optional customer 711 programmable secure boot. 712 713config ARCH_RMOBILE 714 bool "Renesas ARM SoCs" 715 select DM 716 select DM_SERIAL 717 select BOARD_EARLY_INIT_F 718 719config TARGET_S32V234EVB 720 bool "Support s32v234evb" 721 select ARM64 722 select SYS_FSL_ERRATUM_ESDHC111 723 724config ARCH_SNAPDRAGON 725 bool "Qualcomm Snapdragon SoCs" 726 select ARM64 727 select DM 728 select DM_GPIO 729 select DM_SERIAL 730 select SPMI 731 select OF_CONTROL 732 select OF_SEPARATE 733 734config ARCH_SOCFPGA 735 bool "Altera SOCFPGA family" 736 select CPU_V7 737 select SUPPORT_SPL 738 select OF_CONTROL 739 select SPL_OF_CONTROL 740 select DM 741 select DM_SPI_FLASH 742 select DM_SPI 743 select ENABLE_ARM_SOC_BOOT0_HOOK 744 select ARCH_EARLY_INIT_R 745 select ARCH_MISC_INIT 746 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 747 748config TARGET_CM_T43 749 bool "Support cm_t43" 750 select ARCH_OMAP2 751 752config ARCH_SUNXI 753 bool "Support sunxi (Allwinner) SoCs" 754 select CMD_GPIO 755 select CMD_MMC if MMC 756 select CMD_USB if DISTRO_DEFAULTS 757 select DM 758 select DM_ETH 759 select DM_GPIO 760 select DM_KEYBOARD 761 select DM_SERIAL 762 select DM_USB if DISTRO_DEFAULTS 763 select OF_BOARD_SETUP 764 select OF_CONTROL 765 select OF_SEPARATE 766 select SPL_STACK_R if SUPPORT_SPL 767 select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL 768 select SYS_NS16550 769 select USB if DISTRO_DEFAULTS 770 select USB_STORAGE if DISTRO_DEFAULTS 771 select USB_KEYBOARD if DISTRO_DEFAULTS 772 select USE_TINY_PRINTF 773 774config TARGET_TS4600 775 bool "Support TS4600" 776 select CPU_ARM926EJS 777 select SUPPORT_SPL 778 779config TARGET_TS4800 780 bool "Support TS4800" 781 select CPU_V7 782 select SYS_FSL_ERRATUM_ESDHC_A001 783 784config TARGET_VF610TWR 785 bool "Support vf610twr" 786 select CPU_V7 787 select SYS_FSL_ERRATUM_ESDHC111 788 789config TARGET_COLIBRI_VF 790 bool "Support Colibri VF50/61" 791 select BOARD_LATE_INIT 792 select CPU_V7 793 select SYS_FSL_ERRATUM_ESDHC111 794 795config TARGET_PCM052 796 bool "Support pcm-052" 797 select CPU_V7 798 select SYS_FSL_ERRATUM_ESDHC111 799 select SYS_FSL_ERRATUM_ESDHC135 800 select SYS_FSL_ERRATUM_ESDHC_A001 801 802config TARGET_BK4R1 803 bool "Support BK4r1" 804 select CPU_V7 805 select SYS_FSL_ERRATUM_ESDHC111 806 select SYS_FSL_ERRATUM_ESDHC135 807 select SYS_FSL_ERRATUM_ESDHC_A001 808 809config ARCH_ZYNQ 810 bool "Xilinx Zynq Platform" 811 select BOARD_LATE_INIT 812 select CPU_V7 813 select SUPPORT_SPL 814 select OF_CONTROL 815 select SPL_OF_CONTROL if SPL 816 select DM 817 select DM_ETH 818 select DM_GPIO 819 select SPL_DM if SPL 820 select DM_MMC 821 select DM_MMC_OPS 822 select DM_SPI 823 select DM_SERIAL 824 select DM_SPI_FLASH 825 select SPL_SEPARATE_BSS if SPL 826 select DM_USB if USB 827 select BLK 828 829config ARCH_ZYNQMP 830 bool "Support Xilinx ZynqMP Platform" 831 select ARM64 832 select BOARD_LATE_INIT 833 select DM 834 select OF_CONTROL 835 select DM_SERIAL 836 select SUPPORT_SPL 837 select CLK 838 select SPL_CLK 839 select DM_USB if USB 840 841config TEGRA 842 bool "NVIDIA Tegra" 843 844config TARGET_VEXPRESS64_AEMV8A 845 bool "Support vexpress_aemv8a" 846 select ARM64 847 848config TARGET_VEXPRESS64_BASE_FVP 849 bool "Support Versatile Express ARMv8a FVP BASE model" 850 select ARM64 851 select SEMIHOSTING 852 853config TARGET_VEXPRESS64_BASE_FVP_DRAM 854 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 855 select ARM64 856 help 857 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 858 the default config to allow the user to load the images directly into 859 DRAM using model parameters rather than by using semi-hosting to load 860 the files from the host filesystem. 861 862config TARGET_VEXPRESS64_JUNO 863 bool "Support Versatile Express Juno Development Platform" 864 select ARM64 865 866config TARGET_LS2080A_EMU 867 bool "Support ls2080a_emu" 868 select ARCH_LS2080A 869 select ARM64 870 select ARMV8_MULTIENTRY 871 select ARCH_MISC_INIT 872 help 873 Support for Freescale LS2080A_EMU platform 874 The LS2080A Development System (EMULATOR) is a pre silicon 875 development platform that supports the QorIQ LS2080A 876 Layerscape Architecture processor. 877 878config TARGET_LS2080A_SIMU 879 bool "Support ls2080a_simu" 880 select ARCH_LS2080A 881 select ARM64 882 select ARMV8_MULTIENTRY 883 select ARCH_MISC_INIT 884 help 885 Support for Freescale LS2080A_SIMU platform 886 The LS2080A Development System (QDS) is a pre silicon 887 development platform that supports the QorIQ LS2080A 888 Layerscape Architecture processor. 889 890config TARGET_LS2080AQDS 891 bool "Support ls2080aqds" 892 select ARCH_LS2080A 893 select ARM64 894 select ARMV8_MULTIENTRY 895 select BOARD_LATE_INIT 896 select SUPPORT_SPL 897 select ARCH_MISC_INIT 898 help 899 Support for Freescale LS2080AQDS platform 900 The LS2080A Development System (QDS) is a high-performance 901 development platform that supports the QorIQ LS2080A 902 Layerscape Architecture processor. 903 904config TARGET_LS2080ARDB 905 bool "Support ls2080ardb" 906 select ARCH_LS2080A 907 select ARM64 908 select ARMV8_MULTIENTRY 909 select BOARD_LATE_INIT 910 select SUPPORT_SPL 911 select ARCH_MISC_INIT 912 help 913 Support for Freescale LS2080ARDB platform. 914 The LS2080A Reference design board (RDB) is a high-performance 915 development platform that supports the QorIQ LS2080A 916 Layerscape Architecture processor. 917 918config TARGET_HIKEY 919 bool "Support HiKey 96boards Consumer Edition Platform" 920 select ARM64 921 select DM 922 select DM_GPIO 923 select DM_SERIAL 924 select OF_CONTROL 925 help 926 Support for HiKey 96boards platform. It features a HI6220 927 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 928 929config TARGET_LS1012AQDS 930 bool "Support ls1012aqds" 931 select ARCH_LS1012A 932 select ARM64 933 select BOARD_LATE_INIT 934 help 935 Support for Freescale LS1012AQDS platform. 936 The LS1012A Development System (QDS) is a high-performance 937 development platform that supports the QorIQ LS1012A 938 Layerscape Architecture processor. 939 940config TARGET_LS1012ARDB 941 bool "Support ls1012ardb" 942 select ARCH_LS1012A 943 select ARM64 944 select BOARD_LATE_INIT 945 help 946 Support for Freescale LS1012ARDB platform. 947 The LS1012A Reference design board (RDB) is a high-performance 948 development platform that supports the QorIQ LS1012A 949 Layerscape Architecture processor. 950 951config TARGET_LS1012AFRDM 952 bool "Support ls1012afrdm" 953 select ARCH_LS1012A 954 select ARM64 955 help 956 Support for Freescale LS1012AFRDM platform. 957 The LS1012A Freedom board (FRDM) is a high-performance 958 development platform that supports the QorIQ LS1012A 959 Layerscape Architecture processor. 960 961config TARGET_LS1021AQDS 962 bool "Support ls1021aqds" 963 select BOARD_LATE_INIT 964 select CPU_V7 965 select CPU_V7_HAS_NONSEC 966 select CPU_V7_HAS_VIRT 967 select SUPPORT_SPL 968 select ARCH_LS1021A 969 select ARCH_SUPPORT_PSCI 970 select LS1_DEEP_SLEEP 971 select SYS_FSL_DDR 972 select BOARD_EARLY_INIT_F 973 974config TARGET_LS1021ATWR 975 bool "Support ls1021atwr" 976 select BOARD_LATE_INIT 977 select CPU_V7 978 select CPU_V7_HAS_NONSEC 979 select CPU_V7_HAS_VIRT 980 select SUPPORT_SPL 981 select ARCH_LS1021A 982 select ARCH_SUPPORT_PSCI 983 select LS1_DEEP_SLEEP 984 select BOARD_EARLY_INIT_F 985 986config TARGET_LS1021AIOT 987 bool "Support ls1021aiot" 988 select BOARD_LATE_INIT 989 select CPU_V7 990 select CPU_V7_HAS_NONSEC 991 select CPU_V7_HAS_VIRT 992 select SUPPORT_SPL 993 select ARCH_LS1021A 994 select ARCH_SUPPORT_PSCI 995 help 996 Support for Freescale LS1021AIOT platform. 997 The LS1021A Freescale board (IOT) is a high-performance 998 development platform that supports the QorIQ LS1021A 999 Layerscape Architecture processor. 1000 1001config TARGET_LS1043AQDS 1002 bool "Support ls1043aqds" 1003 select ARCH_LS1043A 1004 select ARM64 1005 select ARMV8_MULTIENTRY 1006 select BOARD_LATE_INIT 1007 select SUPPORT_SPL 1008 select BOARD_EARLY_INIT_F 1009 help 1010 Support for Freescale LS1043AQDS platform. 1011 1012config TARGET_LS1043ARDB 1013 bool "Support ls1043ardb" 1014 select ARCH_LS1043A 1015 select ARM64 1016 select ARMV8_MULTIENTRY 1017 select BOARD_LATE_INIT 1018 select SUPPORT_SPL 1019 select BOARD_EARLY_INIT_F 1020 help 1021 Support for Freescale LS1043ARDB platform. 1022 1023config TARGET_LS1046AQDS 1024 bool "Support ls1046aqds" 1025 select ARCH_LS1046A 1026 select ARM64 1027 select ARMV8_MULTIENTRY 1028 select BOARD_LATE_INIT 1029 select SUPPORT_SPL 1030 select DM_SPI_FLASH if DM_SPI 1031 select BOARD_EARLY_INIT_F 1032 help 1033 Support for Freescale LS1046AQDS platform. 1034 The LS1046A Development System (QDS) is a high-performance 1035 development platform that supports the QorIQ LS1046A 1036 Layerscape Architecture processor. 1037 1038config TARGET_LS1046ARDB 1039 bool "Support ls1046ardb" 1040 select ARCH_LS1046A 1041 select ARM64 1042 select ARMV8_MULTIENTRY 1043 select BOARD_LATE_INIT 1044 select SUPPORT_SPL 1045 select DM_SPI_FLASH if DM_SPI 1046 select POWER_MC34VR500 1047 select BOARD_EARLY_INIT_F 1048 help 1049 Support for Freescale LS1046ARDB platform. 1050 The LS1046A Reference Design Board (RDB) is a high-performance 1051 development platform that supports the QorIQ LS1046A 1052 Layerscape Architecture processor. 1053 1054config TARGET_H2200 1055 bool "Support h2200" 1056 select CPU_PXA 1057 1058config TARGET_ZIPITZ2 1059 bool "Support zipitz2" 1060 select CPU_PXA 1061 1062config TARGET_COLIBRI_PXA270 1063 bool "Support colibri_pxa270" 1064 select CPU_PXA 1065 1066config ARCH_UNIPHIER 1067 bool "Socionext UniPhier SoCs" 1068 select BOARD_LATE_INIT 1069 select CLK_UNIPHIER 1070 select DM 1071 select DM_GPIO 1072 select DM_I2C 1073 select DM_MMC 1074 select DM_RESET 1075 select DM_SERIAL 1076 select DM_USB 1077 select OF_CONTROL 1078 select OF_LIBFDT 1079 select PINCTRL 1080 select SPL_DM if SPL 1081 select SPL_LIBCOMMON_SUPPORT if SPL 1082 select SPL_LIBGENERIC_SUPPORT if SPL 1083 select SPL_OF_CONTROL if SPL 1084 select SPL_PINCTRL if SPL 1085 select SUPPORT_SPL 1086 help 1087 Support for UniPhier SoC family developed by Socionext Inc. 1088 (formerly, System LSI Business Division of Panasonic Corporation) 1089 1090config STM32 1091 bool "Support STM32" 1092 select CPU_V7M 1093 select DM 1094 select DM_SERIAL 1095 1096config ARCH_STI 1097 bool "Support STMicrolectronics SoCs" 1098 select CPU_V7 1099 select DM 1100 select DM_SERIAL 1101 help 1102 Support for STMicroelectronics STiH407/10 SoC family. 1103 This SoC is used on Linaro 96Board STiH410-B2260 1104 1105config ARCH_ROCKCHIP 1106 bool "Support Rockchip SoCs" 1107 select OF_CONTROL 1108 select BLK 1109 select DM 1110 select SPL_DM if SPL 1111 select SYS_MALLOC_F 1112 select SPL_SYS_MALLOC_SIMPLE if SPL 1113 select DM_GPIO 1114 select DM_I2C 1115 select DM_MMC 1116 select DM_MMC_OPS 1117 select DM_SERIAL 1118 select DM_SPI 1119 select DM_SPI_FLASH 1120 select DM_USB if USB 1121 select DM_PWM 1122 select DM_REGULATOR 1123 1124config TARGET_THUNDERX_88XX 1125 bool "Support ThunderX 88xx" 1126 select ARM64 1127 select OF_CONTROL 1128 select SYS_CACHE_SHIFT_7 1129 1130config ARCH_ASPEED 1131 bool "Support Aspeed SoCs" 1132 select OF_CONTROL 1133 select DM 1134 1135endchoice 1136 1137source "arch/arm/mach-aspeed/Kconfig" 1138 1139source "arch/arm/mach-at91/Kconfig" 1140 1141source "arch/arm/mach-bcm283x/Kconfig" 1142 1143source "arch/arm/mach-davinci/Kconfig" 1144 1145source "arch/arm/mach-exynos/Kconfig" 1146 1147source "arch/arm/mach-highbank/Kconfig" 1148 1149source "arch/arm/mach-integrator/Kconfig" 1150 1151source "arch/arm/mach-keystone/Kconfig" 1152 1153source "arch/arm/mach-kirkwood/Kconfig" 1154 1155source "arch/arm/mach-mvebu/Kconfig" 1156 1157source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1158 1159source "arch/arm/cpu/armv7/mx7/Kconfig" 1160 1161source "arch/arm/cpu/armv7/mx6/Kconfig" 1162 1163source "arch/arm/cpu/armv7/mx5/Kconfig" 1164 1165source "arch/arm/mach-omap2/Kconfig" 1166 1167source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1168 1169source "arch/arm/mach-orion5x/Kconfig" 1170 1171source "arch/arm/mach-rmobile/Kconfig" 1172 1173source "arch/arm/mach-meson/Kconfig" 1174 1175source "arch/arm/mach-rockchip/Kconfig" 1176 1177source "arch/arm/mach-s5pc1xx/Kconfig" 1178 1179source "arch/arm/mach-snapdragon/Kconfig" 1180 1181source "arch/arm/mach-socfpga/Kconfig" 1182 1183source "arch/arm/mach-sti/Kconfig" 1184 1185source "arch/arm/mach-stm32/Kconfig" 1186 1187source "arch/arm/mach-tegra/Kconfig" 1188 1189source "arch/arm/mach-uniphier/Kconfig" 1190 1191source "arch/arm/mach-zynq/Kconfig" 1192 1193source "arch/arm/cpu/armv7/Kconfig" 1194 1195source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1196 1197source "arch/arm/cpu/armv8/Kconfig" 1198 1199source "arch/arm/imx-common/Kconfig" 1200 1201source "board/bosch/shc/Kconfig" 1202source "board/BuR/brxre1/Kconfig" 1203source "board/BuR/brppt1/Kconfig" 1204source "board/CarMediaLab/flea3/Kconfig" 1205source "board/Marvell/aspenite/Kconfig" 1206source "board/Marvell/gplugd/Kconfig" 1207source "board/armadeus/apf27/Kconfig" 1208source "board/armltd/vexpress/Kconfig" 1209source "board/armltd/vexpress64/Kconfig" 1210source "board/bluegiga/apx4devkit/Kconfig" 1211source "board/broadcom/bcm23550_w1d/Kconfig" 1212source "board/broadcom/bcm28155_ap/Kconfig" 1213source "board/broadcom/bcmcygnus/Kconfig" 1214source "board/broadcom/bcmnsp/Kconfig" 1215source "board/cavium/thunderx/Kconfig" 1216source "board/cirrus/edb93xx/Kconfig" 1217source "board/compulab/cm_t335/Kconfig" 1218source "board/compulab/cm_t43/Kconfig" 1219source "board/creative/xfi3/Kconfig" 1220source "board/denx/m28evk/Kconfig" 1221source "board/denx/m53evk/Kconfig" 1222source "board/freescale/ls2080a/Kconfig" 1223source "board/freescale/ls2080aqds/Kconfig" 1224source "board/freescale/ls2080ardb/Kconfig" 1225source "board/freescale/ls1021aqds/Kconfig" 1226source "board/freescale/ls1043aqds/Kconfig" 1227source "board/freescale/ls1021atwr/Kconfig" 1228source "board/freescale/ls1021aiot/Kconfig" 1229source "board/freescale/ls1046aqds/Kconfig" 1230source "board/freescale/ls1043ardb/Kconfig" 1231source "board/freescale/ls1046ardb/Kconfig" 1232source "board/freescale/ls1012aqds/Kconfig" 1233source "board/freescale/ls1012ardb/Kconfig" 1234source "board/freescale/ls1012afrdm/Kconfig" 1235source "board/freescale/mx23evk/Kconfig" 1236source "board/freescale/mx25pdk/Kconfig" 1237source "board/freescale/mx28evk/Kconfig" 1238source "board/freescale/mx31ads/Kconfig" 1239source "board/freescale/mx31pdk/Kconfig" 1240source "board/freescale/mx35pdk/Kconfig" 1241source "board/freescale/mx51evk/Kconfig" 1242source "board/freescale/mx53ard/Kconfig" 1243source "board/freescale/mx53evk/Kconfig" 1244source "board/freescale/mx53loco/Kconfig" 1245source "board/freescale/mx53smd/Kconfig" 1246source "board/freescale/s32v234evb/Kconfig" 1247source "board/freescale/vf610twr/Kconfig" 1248source "board/grinn/chiliboard/Kconfig" 1249source "board/gumstix/pepper/Kconfig" 1250source "board/h2200/Kconfig" 1251source "board/hisilicon/hikey/Kconfig" 1252source "board/imx31_phycore/Kconfig" 1253source "board/isee/igep0033/Kconfig" 1254source "board/olimex/mx23_olinuxino/Kconfig" 1255source "board/phytec/pcm051/Kconfig" 1256source "board/phytec/pcm052/Kconfig" 1257source "board/ppcag/bg0900/Kconfig" 1258source "board/sandisk/sansa_fuze_plus/Kconfig" 1259source "board/schulercontrol/sc_sps_1/Kconfig" 1260source "board/siemens/draco/Kconfig" 1261source "board/siemens/pxm2/Kconfig" 1262source "board/siemens/rut/Kconfig" 1263source "board/silica/pengwyn/Kconfig" 1264source "board/spear/spear300/Kconfig" 1265source "board/spear/spear310/Kconfig" 1266source "board/spear/spear320/Kconfig" 1267source "board/spear/spear600/Kconfig" 1268source "board/spear/x600/Kconfig" 1269source "board/st/stv0991/Kconfig" 1270source "board/sunxi/Kconfig" 1271source "board/syteco/zmx25/Kconfig" 1272source "board/tcl/sl50/Kconfig" 1273source "board/ti/am335x/Kconfig" 1274source "board/ti/am43xx/Kconfig" 1275source "board/birdland/bav335x/Kconfig" 1276source "board/ti/ti814x/Kconfig" 1277source "board/ti/ti816x/Kconfig" 1278source "board/timll/devkit3250/Kconfig" 1279source "board/toradex/colibri_pxa270/Kconfig" 1280source "board/toradex/colibri_vf/Kconfig" 1281source "board/technologic/ts4600/Kconfig" 1282source "board/technologic/ts4800/Kconfig" 1283source "board/vscom/baltos/Kconfig" 1284source "board/woodburn/Kconfig" 1285source "board/work-microwave/work_92105/Kconfig" 1286source "board/zipitz2/Kconfig" 1287 1288source "arch/arm/Kconfig.debug" 1289 1290endmenu 1291