1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config TARGET_VEXPRESS_CA15_TC2 532 bool "Support vexpress_ca15_tc2" 533 select CPU_V7A 534 select CPU_V7_HAS_NONSEC 535 select CPU_V7_HAS_VIRT 536 select PL011_SERIAL 537 538config ARCH_BCMSTB 539 bool "Broadcom BCM7XXX family" 540 select CPU_V7A 541 select DM 542 select OF_CONTROL 543 select OF_PRIOR_STAGE 544 imply CMD_DM 545 help 546 This enables support for Broadcom ARM-based set-top box 547 chipsets, including the 7445 family of chips. 548 549config TARGET_VEXPRESS_CA5X2 550 bool "Support vexpress_ca5x2" 551 select CPU_V7A 552 select PL011_SERIAL 553 554config TARGET_VEXPRESS_CA9X4 555 bool "Support vexpress_ca9x4" 556 select CPU_V7A 557 select PL011_SERIAL 558 559config TARGET_BCM23550_W1D 560 bool "Support bcm23550_w1d" 561 select CPU_V7A 562 imply CRC32_VERIFY 563 imply FAT_WRITE 564 565config TARGET_BCM28155_AP 566 bool "Support bcm28155_ap" 567 select CPU_V7A 568 imply CRC32_VERIFY 569 imply FAT_WRITE 570 571config TARGET_BCMCYGNUS 572 bool "Support bcmcygnus" 573 select CPU_V7A 574 imply BCM_SF2_ETH 575 imply BCM_SF2_ETH_GMAC 576 imply CMD_HASH 577 imply CRC32_VERIFY 578 imply FAT_WRITE 579 imply HASH_VERIFY 580 imply NETDEVICES 581 582config TARGET_BCMNSP 583 bool "Support bcmnsp" 584 select CPU_V7A 585 586config TARGET_BCMNS2 587 bool "Support Broadcom Northstar2" 588 select ARM64 589 help 590 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 591 ARMv8 Cortex-A57 processors targeting a broad range of networking 592 applications 593 594config ARCH_EXYNOS 595 bool "Samsung EXYNOS" 596 select DM 597 select DM_GPIO 598 select DM_I2C 599 select DM_KEYBOARD 600 select DM_SERIAL 601 select DM_SPI 602 select DM_SPI_FLASH 603 select SPI 604 imply CMD_DM 605 imply FAT_WRITE 606 607config ARCH_S5PC1XX 608 bool "Samsung S5PC1XX" 609 select CPU_V7A 610 select DM 611 select DM_GPIO 612 select DM_I2C 613 select DM_SERIAL 614 imply CMD_DM 615 616config ARCH_HIGHBANK 617 bool "Calxeda Highbank" 618 select CPU_V7A 619 select PL011_SERIAL 620 621config ARCH_INTEGRATOR 622 bool "ARM Ltd. Integrator family" 623 select DM 624 select DM_SERIAL 625 select PL01X_SERIAL 626 imply CMD_DM 627 628config ARCH_KEYSTONE 629 bool "TI Keystone" 630 select CMD_POWEROFF 631 select CPU_V7A 632 select SUPPORT_SPL 633 select SYS_ARCH_TIMER 634 select SYS_THUMB_BUILD 635 imply CMD_MTDPARTS 636 imply CMD_SAVES 637 imply FIT 638 639config ARCH_K3 640 bool "Texas Instruments' K3 Architecture" 641 select SPL 642 select SUPPORT_SPL 643 select FIT 644 645config ARCH_OMAP2PLUS 646 bool "TI OMAP2+" 647 select CPU_V7A 648 select SPL_BOARD_INIT if SPL 649 select SPL_STACK_R if SPL 650 select SUPPORT_SPL 651 imply FIT 652 653config ARCH_MESON 654 bool "Amlogic Meson" 655 imply DISTRO_DEFAULTS 656 help 657 Support for the Meson SoC family developed by Amlogic Inc., 658 targeted at media players and tablet computers. We currently 659 support the S905 (GXBaby) 64-bit SoC. 660 661config ARCH_LPC32XX 662 bool "NXP LPC32xx platform" 663 select CPU_ARM926EJS 664 select DM 665 select DM_GPIO 666 select DM_SERIAL 667 select SPL_DM if SPL 668 select SUPPORT_SPL 669 imply CMD_DM 670 671config ARCH_IMX8 672 bool "NXP i.MX8 platform" 673 select ARM64 674 select DM 675 select OF_CONTROL 676 677config ARCH_MX8M 678 bool "NXP i.MX8M platform" 679 select ARM64 680 select DM 681 select SUPPORT_SPL 682 imply CMD_DM 683 684config ARCH_MX23 685 bool "NXP i.MX23 family" 686 select CPU_ARM926EJS 687 select PL011_SERIAL 688 select SUPPORT_SPL 689 690config ARCH_MX25 691 bool "NXP MX25" 692 select CPU_ARM926EJS 693 imply MXC_GPIO 694 695config ARCH_MX28 696 bool "NXP i.MX28 family" 697 select CPU_ARM926EJS 698 select PL011_SERIAL 699 select SUPPORT_SPL 700 701config ARCH_MX31 702 bool "NXP i.MX31 family" 703 select CPU_ARM1136 704 705config ARCH_MX7ULP 706 bool "NXP MX7ULP" 707 select CPU_V7A 708 select ROM_UNIFIED_SECTIONS 709 imply MXC_GPIO 710 711config ARCH_MX7 712 bool "Freescale MX7" 713 select ARCH_MISC_INIT 714 select BOARD_EARLY_INIT_F 715 select CPU_V7A 716 select SYS_FSL_HAS_SEC if SECURE_BOOT 717 select SYS_FSL_SEC_COMPAT_4 718 select SYS_FSL_SEC_LE 719 imply MXC_GPIO 720 721config ARCH_MX6 722 bool "Freescale MX6" 723 select CPU_V7A 724 select SYS_FSL_HAS_SEC if SECURE_BOOT 725 select SYS_FSL_SEC_COMPAT_4 726 select SYS_FSL_SEC_LE 727 select SYS_THUMB_BUILD if SPL 728 imply MXC_GPIO 729 730if ARCH_MX6 731config SPL_LDSCRIPT 732 default "arch/arm/mach-omap2/u-boot-spl.lds" 733endif 734 735config ARCH_MX5 736 bool "Freescale MX5" 737 select BOARD_EARLY_INIT_F 738 select CPU_V7A 739 imply MXC_GPIO 740 741config ARCH_OWL 742 bool "Actions Semi OWL SoCs" 743 select ARM64 744 select DM 745 select DM_SERIAL 746 select OF_CONTROL 747 imply CMD_DM 748 749config ARCH_QEMU 750 bool "QEMU Virtual Platform" 751 select DM 752 select DM_SERIAL 753 select OF_CONTROL 754 select PL01X_SERIAL 755 imply CMD_DM 756 imply DM_RTC 757 imply RTC_PL031 758 759config ARCH_RMOBILE 760 bool "Renesas ARM SoCs" 761 select BOARD_EARLY_INIT_F 762 select DM 763 select DM_SERIAL 764 imply CMD_DM 765 imply FAT_WRITE 766 imply SYS_THUMB_BUILD 767 768config TARGET_S32V234EVB 769 bool "Support s32v234evb" 770 select ARM64 771 select SYS_FSL_ERRATUM_ESDHC111 772 773config ARCH_SNAPDRAGON 774 bool "Qualcomm Snapdragon SoCs" 775 select ARM64 776 select DM 777 select DM_GPIO 778 select DM_SERIAL 779 select MSM_SMEM 780 select OF_CONTROL 781 select OF_SEPARATE 782 select SMEM 783 select SPMI 784 imply CMD_DM 785 786config ARCH_SOCFPGA 787 bool "Altera SOCFPGA family" 788 select ARCH_EARLY_INIT_R 789 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 790 select ARM64 if TARGET_SOCFPGA_STRATIX10 791 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 792 select DM 793 select DM_SERIAL 794 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 795 select OF_CONTROL 796 select SPL_DM_RESET if DM_RESET 797 select SPL_DM_SERIAL 798 select SPL_LIBCOMMON_SUPPORT 799 select SPL_LIBDISK_SUPPORT 800 select SPL_LIBGENERIC_SUPPORT 801 select SPL_MMC_SUPPORT if DM_MMC 802 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 803 select SPL_OF_CONTROL 804 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 805 select SPL_SERIAL_SUPPORT 806 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 807 select SPL_SPI_SUPPORT if DM_SPI 808 select SPL_WATCHDOG_SUPPORT 809 select SUPPORT_SPL 810 select SYS_NS16550 811 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 812 imply CMD_DM 813 imply CMD_MTDPARTS 814 imply CRC32_VERIFY 815 imply DM_SPI 816 imply DM_SPI_FLASH 817 imply FAT_WRITE 818 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 819 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 820 821config ARCH_SUNXI 822 bool "Support sunxi (Allwinner) SoCs" 823 select BINMAN 824 select CMD_GPIO 825 select CMD_MMC if MMC 826 select CMD_USB if DISTRO_DEFAULTS 827 select DM 828 select DM_ETH 829 select DM_GPIO 830 select DM_KEYBOARD 831 select DM_SERIAL 832 select DM_USB if DISTRO_DEFAULTS 833 select OF_BOARD_SETUP 834 select OF_CONTROL 835 select OF_SEPARATE 836 select SPECIFY_CONSOLE_INDEX 837 select SPL_STACK_R if SPL 838 select SPL_SYS_MALLOC_SIMPLE if SPL 839 select SPL_SYS_THUMB_BUILD if !ARM64 840 select SYS_NS16550 841 select SYS_THUMB_BUILD if !ARM64 842 select USB if DISTRO_DEFAULTS 843 select USB_KEYBOARD if DISTRO_DEFAULTS 844 select USB_STORAGE if DISTRO_DEFAULTS 845 select USE_TINY_PRINTF 846 imply CMD_DM 847 imply CMD_GPT 848 imply CMD_UBI if NAND 849 imply DISTRO_DEFAULTS 850 imply FAT_WRITE 851 imply FIT 852 imply OF_LIBFDT_OVERLAY 853 imply PRE_CONSOLE_BUFFER 854 imply SPL_GPIO_SUPPORT 855 imply SPL_LIBCOMMON_SUPPORT 856 imply SPL_LIBDISK_SUPPORT 857 imply SPL_LIBGENERIC_SUPPORT 858 imply SPL_MMC_SUPPORT if MMC 859 imply SPL_POWER_SUPPORT 860 imply SPL_SERIAL_SUPPORT 861 imply USB_GADGET 862 863config ARCH_VERSAL 864 bool "Support Xilinx Versal Platform" 865 select ARM64 866 select CLK 867 select DM 868 select DM_SERIAL 869 select OF_CONTROL 870 871config ARCH_VF610 872 bool "Freescale Vybrid" 873 select CPU_V7A 874 select SYS_FSL_ERRATUM_ESDHC111 875 imply CMD_MTDPARTS 876 imply NAND 877 878config ARCH_ZYNQ 879 bool "Xilinx Zynq based platform" 880 select BOARD_EARLY_INIT_F if WDT 881 select CLK 882 select CLK_ZYNQ 883 select CPU_V7A 884 select DM 885 select DM_ETH if NET 886 select DM_MMC if MMC 887 select DM_SERIAL 888 select DM_SPI 889 select DM_SPI_FLASH 890 select DM_USB if USB 891 select OF_CONTROL 892 select SPI 893 select SPL_BOARD_INIT if SPL 894 select SPL_CLK if SPL 895 select SPL_DM if SPL 896 select SPL_OF_CONTROL if SPL 897 select SPL_SEPARATE_BSS if SPL 898 select SUPPORT_SPL 899 imply ARCH_EARLY_INIT_R 900 imply BOARD_LATE_INIT 901 imply CMD_CLK 902 imply CMD_DM 903 imply CMD_SPL 904 imply FAT_WRITE 905 906config ARCH_ZYNQMP_R5 907 bool "Xilinx ZynqMP R5 based platform" 908 select CLK 909 select CPU_V7R 910 select DM 911 select DM_SERIAL 912 select OF_CONTROL 913 imply CMD_DM 914 915config ARCH_ZYNQMP 916 bool "Xilinx ZynqMP based platform" 917 select ARM64 918 select CLK 919 select DM 920 select DM_SERIAL 921 select DM_USB if USB 922 select OF_CONTROL 923 select SPL_BOARD_INIT if SPL 924 select SPL_CLK if SPL 925 select SUPPORT_SPL 926 imply BOARD_LATE_INIT 927 imply CMD_DM 928 imply FAT_WRITE 929 imply MP 930 931config TEGRA 932 bool "NVIDIA Tegra" 933 imply DISTRO_DEFAULTS 934 imply FAT_WRITE 935 936config TARGET_VEXPRESS64_AEMV8A 937 bool "Support vexpress_aemv8a" 938 select ARM64 939 select PL01X_SERIAL 940 941config TARGET_VEXPRESS64_BASE_FVP 942 bool "Support Versatile Express ARMv8a FVP BASE model" 943 select ARM64 944 select PL01X_SERIAL 945 select SEMIHOSTING 946 947config TARGET_VEXPRESS64_BASE_FVP_DRAM 948 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 949 select ARM64 950 select PL01X_SERIAL 951 help 952 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 953 the default config to allow the user to load the images directly into 954 DRAM using model parameters rather than by using semi-hosting to load 955 the files from the host filesystem. 956 957config TARGET_VEXPRESS64_JUNO 958 bool "Support Versatile Express Juno Development Platform" 959 select ARM64 960 select PL01X_SERIAL 961 962config TARGET_LS2080A_EMU 963 bool "Support ls2080a_emu" 964 select ARCH_LS2080A 965 select ARCH_MISC_INIT 966 select ARM64 967 select ARMV8_MULTIENTRY 968 help 969 Support for Freescale LS2080A_EMU platform 970 The LS2080A Development System (EMULATOR) is a pre silicon 971 development platform that supports the QorIQ LS2080A 972 Layerscape Architecture processor. 973 974config TARGET_LS2080A_SIMU 975 bool "Support ls2080a_simu" 976 select ARCH_LS2080A 977 select ARCH_MISC_INIT 978 select ARM64 979 select ARMV8_MULTIENTRY 980 help 981 Support for Freescale LS2080A_SIMU platform 982 The LS2080A Development System (QDS) is a pre silicon 983 development platform that supports the QorIQ LS2080A 984 Layerscape Architecture processor. 985 986config TARGET_LS1088AQDS 987 bool "Support ls1088aqds" 988 select ARCH_LS1088A 989 select ARCH_MISC_INIT 990 select ARM64 991 select ARMV8_MULTIENTRY 992 select BOARD_LATE_INIT 993 select SUPPORT_SPL 994 help 995 Support for NXP LS1088AQDS platform 996 The LS1088A Development System (QDS) is a high-performance 997 development platform that supports the QorIQ LS1088A 998 Layerscape Architecture processor. 999 1000config TARGET_LS2080AQDS 1001 bool "Support ls2080aqds" 1002 select ARCH_LS2080A 1003 select ARCH_MISC_INIT 1004 select ARM64 1005 select ARMV8_MULTIENTRY 1006 select BOARD_LATE_INIT 1007 select SUPPORT_SPL 1008 imply SCSI 1009 imply SCSI_AHCI 1010 help 1011 Support for Freescale LS2080AQDS platform 1012 The LS2080A Development System (QDS) is a high-performance 1013 development platform that supports the QorIQ LS2080A 1014 Layerscape Architecture processor. 1015 1016config TARGET_LS2080ARDB 1017 bool "Support ls2080ardb" 1018 select ARCH_LS2080A 1019 select ARCH_MISC_INIT 1020 select ARM64 1021 select ARMV8_MULTIENTRY 1022 select BOARD_LATE_INIT 1023 select SUPPORT_SPL 1024 imply SCSI 1025 imply SCSI_AHCI 1026 help 1027 Support for Freescale LS2080ARDB platform. 1028 The LS2080A Reference design board (RDB) is a high-performance 1029 development platform that supports the QorIQ LS2080A 1030 Layerscape Architecture processor. 1031 1032config TARGET_LS2081ARDB 1033 bool "Support ls2081ardb" 1034 select ARCH_LS2080A 1035 select ARCH_MISC_INIT 1036 select ARM64 1037 select ARMV8_MULTIENTRY 1038 select BOARD_LATE_INIT 1039 select SUPPORT_SPL 1040 help 1041 Support for Freescale LS2081ARDB platform. 1042 The LS2081A Reference design board (RDB) is a high-performance 1043 development platform that supports the QorIQ LS2081A/LS2041A 1044 Layerscape Architecture processor. 1045 1046config TARGET_HIKEY 1047 bool "Support HiKey 96boards Consumer Edition Platform" 1048 select ARM64 1049 select DM 1050 select DM_GPIO 1051 select DM_SERIAL 1052 select OF_CONTROL 1053 select PL01X_SERIAL 1054 select SPECIFY_CONSOLE_INDEX 1055 imply CMD_DM 1056 help 1057 Support for HiKey 96boards platform. It features a HI6220 1058 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1059 1060config TARGET_POPLAR 1061 bool "Support Poplar 96boards Enterprise Edition Platform" 1062 select ARM64 1063 select DM 1064 select DM_SERIAL 1065 select DM_USB 1066 select OF_CONTROL 1067 select PL01X_SERIAL 1068 imply CMD_DM 1069 help 1070 Support for Poplar 96boards EE platform. It features a HI3798cv200 1071 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1072 making it capable of running any commercial set-top solution based on 1073 Linux or Android. 1074 1075config TARGET_LS1012AQDS 1076 bool "Support ls1012aqds" 1077 select ARCH_LS1012A 1078 select ARM64 1079 select BOARD_LATE_INIT 1080 help 1081 Support for Freescale LS1012AQDS platform. 1082 The LS1012A Development System (QDS) is a high-performance 1083 development platform that supports the QorIQ LS1012A 1084 Layerscape Architecture processor. 1085 1086config TARGET_LS1012ARDB 1087 bool "Support ls1012ardb" 1088 select ARCH_LS1012A 1089 select ARM64 1090 select BOARD_LATE_INIT 1091 imply SCSI 1092 imply SCSI_AHCI 1093 help 1094 Support for Freescale LS1012ARDB platform. 1095 The LS1012A Reference design board (RDB) is a high-performance 1096 development platform that supports the QorIQ LS1012A 1097 Layerscape Architecture processor. 1098 1099config TARGET_LS1012A2G5RDB 1100 bool "Support ls1012a2g5rdb" 1101 select ARCH_LS1012A 1102 select ARM64 1103 select BOARD_LATE_INIT 1104 imply SCSI 1105 help 1106 Support for Freescale LS1012A2G5RDB platform. 1107 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1108 development platform that supports the QorIQ LS1012A 1109 Layerscape Architecture processor. 1110 1111config TARGET_LS1012AFRWY 1112 bool "Support ls1012afrwy" 1113 select ARCH_LS1012A 1114 select ARM64 1115 select BOARD_LATE_INIT 1116 imply SCSI 1117 imply SCSI_AHCI 1118 help 1119 Support for Freescale LS1012AFRWY platform. 1120 The LS1012A FRWY board (FRWY) is a high-performance 1121 development platform that supports the QorIQ LS1012A 1122 Layerscape Architecture processor. 1123 1124config TARGET_LS1012AFRDM 1125 bool "Support ls1012afrdm" 1126 select ARCH_LS1012A 1127 select ARM64 1128 help 1129 Support for Freescale LS1012AFRDM platform. 1130 The LS1012A Freedom board (FRDM) is a high-performance 1131 development platform that supports the QorIQ LS1012A 1132 Layerscape Architecture processor. 1133 1134config TARGET_LS1088ARDB 1135 bool "Support ls1088ardb" 1136 select ARCH_LS1088A 1137 select ARCH_MISC_INIT 1138 select ARM64 1139 select ARMV8_MULTIENTRY 1140 select BOARD_LATE_INIT 1141 select SUPPORT_SPL 1142 help 1143 Support for NXP LS1088ARDB platform. 1144 The LS1088A Reference design board (RDB) is a high-performance 1145 development platform that supports the QorIQ LS1088A 1146 Layerscape Architecture processor. 1147 1148config TARGET_LS1021AQDS 1149 bool "Support ls1021aqds" 1150 select ARCH_LS1021A 1151 select ARCH_SUPPORT_PSCI 1152 select BOARD_EARLY_INIT_F 1153 select BOARD_LATE_INIT 1154 select CPU_V7A 1155 select CPU_V7_HAS_NONSEC 1156 select CPU_V7_HAS_VIRT 1157 select LS1_DEEP_SLEEP 1158 select SUPPORT_SPL 1159 select SYS_FSL_DDR 1160 imply SCSI 1161 1162config TARGET_LS1021ATWR 1163 bool "Support ls1021atwr" 1164 select ARCH_LS1021A 1165 select ARCH_SUPPORT_PSCI 1166 select BOARD_EARLY_INIT_F 1167 select BOARD_LATE_INIT 1168 select CPU_V7A 1169 select CPU_V7_HAS_NONSEC 1170 select CPU_V7_HAS_VIRT 1171 select LS1_DEEP_SLEEP 1172 select SUPPORT_SPL 1173 imply SCSI 1174 1175config TARGET_LS1021AIOT 1176 bool "Support ls1021aiot" 1177 select ARCH_LS1021A 1178 select ARCH_SUPPORT_PSCI 1179 select BOARD_LATE_INIT 1180 select CPU_V7A 1181 select CPU_V7_HAS_NONSEC 1182 select CPU_V7_HAS_VIRT 1183 select SUPPORT_SPL 1184 imply SCSI 1185 help 1186 Support for Freescale LS1021AIOT platform. 1187 The LS1021A Freescale board (IOT) is a high-performance 1188 development platform that supports the QorIQ LS1021A 1189 Layerscape Architecture processor. 1190 1191config TARGET_LS1043AQDS 1192 bool "Support ls1043aqds" 1193 select ARCH_LS1043A 1194 select ARM64 1195 select ARMV8_MULTIENTRY 1196 select BOARD_EARLY_INIT_F 1197 select BOARD_LATE_INIT 1198 select SUPPORT_SPL 1199 imply SCSI 1200 help 1201 Support for Freescale LS1043AQDS platform. 1202 1203config TARGET_LS1043ARDB 1204 bool "Support ls1043ardb" 1205 select ARCH_LS1043A 1206 select ARM64 1207 select ARMV8_MULTIENTRY 1208 select BOARD_EARLY_INIT_F 1209 select BOARD_LATE_INIT 1210 select SUPPORT_SPL 1211 imply SCSI 1212 help 1213 Support for Freescale LS1043ARDB platform. 1214 1215config TARGET_LS1046AQDS 1216 bool "Support ls1046aqds" 1217 select ARCH_LS1046A 1218 select ARM64 1219 select ARMV8_MULTIENTRY 1220 select BOARD_EARLY_INIT_F 1221 select BOARD_LATE_INIT 1222 select DM_SPI_FLASH if DM_SPI 1223 select SUPPORT_SPL 1224 imply SCSI 1225 help 1226 Support for Freescale LS1046AQDS platform. 1227 The LS1046A Development System (QDS) is a high-performance 1228 development platform that supports the QorIQ LS1046A 1229 Layerscape Architecture processor. 1230 1231config TARGET_LS1046ARDB 1232 bool "Support ls1046ardb" 1233 select ARCH_LS1046A 1234 select ARM64 1235 select ARMV8_MULTIENTRY 1236 select BOARD_EARLY_INIT_F 1237 select BOARD_LATE_INIT 1238 select DM_SPI_FLASH if DM_SPI 1239 select POWER_MC34VR500 1240 select SUPPORT_SPL 1241 imply SCSI 1242 help 1243 Support for Freescale LS1046ARDB platform. 1244 The LS1046A Reference Design Board (RDB) is a high-performance 1245 development platform that supports the QorIQ LS1046A 1246 Layerscape Architecture processor. 1247 1248config TARGET_H2200 1249 bool "Support h2200" 1250 select CPU_PXA 1251 1252config TARGET_ZIPITZ2 1253 bool "Support zipitz2" 1254 select CPU_PXA 1255 1256config TARGET_COLIBRI_PXA270 1257 bool "Support colibri_pxa270" 1258 select CPU_PXA 1259 1260config ARCH_UNIPHIER 1261 bool "Socionext UniPhier SoCs" 1262 select BOARD_LATE_INIT 1263 select DM 1264 select DM_GPIO 1265 select DM_I2C 1266 select DM_MMC 1267 select DM_RESET 1268 select DM_SERIAL 1269 select DM_USB 1270 select OF_BOARD_SETUP 1271 select OF_CONTROL 1272 select OF_LIBFDT 1273 select PINCTRL 1274 select SPL_BOARD_INIT if SPL 1275 select SPL_DM if SPL 1276 select SPL_LIBCOMMON_SUPPORT if SPL 1277 select SPL_LIBGENERIC_SUPPORT if SPL 1278 select SPL_OF_CONTROL if SPL 1279 select SPL_PINCTRL if SPL 1280 select SUPPORT_SPL 1281 imply CMD_DM 1282 imply DISTRO_DEFAULTS 1283 imply FAT_WRITE 1284 help 1285 Support for UniPhier SoC family developed by Socionext Inc. 1286 (formerly, System LSI Business Division of Panasonic Corporation) 1287 1288config STM32 1289 bool "Support STMicroelectronics STM32 MCU with cortex M" 1290 select CPU_V7M 1291 select DM 1292 select DM_SERIAL 1293 imply CMD_DM 1294 1295config ARCH_STI 1296 bool "Support STMicrolectronics SoCs" 1297 select BLK 1298 select CPU_V7A 1299 select DM 1300 select DM_MMC 1301 select DM_RESET 1302 select DM_SERIAL 1303 imply CMD_DM 1304 help 1305 Support for STMicroelectronics STiH407/10 SoC family. 1306 This SoC is used on Linaro 96Board STiH410-B2260 1307 1308config ARCH_STM32MP 1309 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1310 select ARCH_MISC_INIT 1311 select BOARD_LATE_INIT 1312 select CLK 1313 select DM 1314 select DM_GPIO 1315 select DM_RESET 1316 select DM_SERIAL 1317 select MISC 1318 select OF_CONTROL 1319 select OF_LIBFDT 1320 select PINCTRL 1321 select REGMAP 1322 select SUPPORT_SPL 1323 select SYSCON 1324 select SYSRESET 1325 select SYS_THUMB_BUILD 1326 imply CMD_DM 1327 help 1328 Support for STM32MP SoC family developed by STMicroelectronics, 1329 MPUs based on ARM cortex A core 1330 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1331 BootLoader (FSBL) 1332 1333config ARCH_ROCKCHIP 1334 bool "Support Rockchip SoCs" 1335 select BLK 1336 select DM 1337 select DM_GPIO 1338 select DM_I2C 1339 select DM_MMC 1340 select DM_PWM 1341 select DM_REGULATOR 1342 select DM_SERIAL 1343 select DM_SPI 1344 select DM_SPI_FLASH 1345 select DM_USB if USB 1346 select ENABLE_ARM_SOC_BOOT0_HOOK 1347 select OF_CONTROL 1348 select SPI 1349 select SPL_DM if SPL 1350 select SPL_SYS_MALLOC_SIMPLE if SPL 1351 select SYS_MALLOC_F 1352 select SYS_THUMB_BUILD if !ARM64 1353 imply ADC 1354 imply CMD_DM 1355 imply DISTRO_DEFAULTS 1356 imply FAT_WRITE 1357 imply SARADC_ROCKCHIP 1358 imply SPL_SYSRESET 1359 imply SYS_NS16550 1360 imply TPL_SYSRESET 1361 imply USB_FUNCTION_FASTBOOT 1362 1363config TARGET_THUNDERX_88XX 1364 bool "Support ThunderX 88xx" 1365 select ARM64 1366 select OF_CONTROL 1367 select PL01X_SERIAL 1368 select SYS_CACHE_SHIFT_7 1369 1370config ARCH_ASPEED 1371 bool "Support Aspeed SoCs" 1372 select DM 1373 select OF_CONTROL 1374 imply CMD_DM 1375 1376endchoice 1377 1378config TI_SECURE_DEVICE 1379 bool "HS Device Type Support" 1380 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1381 help 1382 If a high secure (HS) device type is being used, this config 1383 must be set. This option impacts various aspects of the 1384 build system (to create signed boot images that can be 1385 authenticated) and the code. See the doc/README.ti-secure 1386 file for further details. 1387 1388source "arch/arm/mach-aspeed/Kconfig" 1389 1390source "arch/arm/mach-at91/Kconfig" 1391 1392source "arch/arm/mach-bcm283x/Kconfig" 1393 1394source "arch/arm/mach-bcmstb/Kconfig" 1395 1396source "arch/arm/mach-davinci/Kconfig" 1397 1398source "arch/arm/mach-exynos/Kconfig" 1399 1400source "arch/arm/mach-highbank/Kconfig" 1401 1402source "arch/arm/mach-integrator/Kconfig" 1403 1404source "arch/arm/mach-k3/Kconfig" 1405 1406source "arch/arm/mach-keystone/Kconfig" 1407 1408source "arch/arm/mach-kirkwood/Kconfig" 1409 1410source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1411 1412source "arch/arm/mach-mvebu/Kconfig" 1413 1414source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1415 1416source "arch/arm/mach-imx/mx2/Kconfig" 1417 1418source "arch/arm/mach-imx/mx3/Kconfig" 1419 1420source "arch/arm/mach-imx/mx5/Kconfig" 1421 1422source "arch/arm/mach-imx/mx6/Kconfig" 1423 1424source "arch/arm/mach-imx/mx7/Kconfig" 1425 1426source "arch/arm/mach-imx/mx7ulp/Kconfig" 1427 1428source "arch/arm/mach-imx/imx8/Kconfig" 1429 1430source "arch/arm/mach-imx/mx8m/Kconfig" 1431 1432source "arch/arm/mach-imx/mxs/Kconfig" 1433 1434source "arch/arm/mach-omap2/Kconfig" 1435 1436source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1437 1438source "arch/arm/mach-orion5x/Kconfig" 1439 1440source "arch/arm/mach-owl/Kconfig" 1441 1442source "arch/arm/mach-rmobile/Kconfig" 1443 1444source "arch/arm/mach-meson/Kconfig" 1445 1446source "arch/arm/mach-qemu/Kconfig" 1447 1448source "arch/arm/mach-rockchip/Kconfig" 1449 1450source "arch/arm/mach-s5pc1xx/Kconfig" 1451 1452source "arch/arm/mach-snapdragon/Kconfig" 1453 1454source "arch/arm/mach-socfpga/Kconfig" 1455 1456source "arch/arm/mach-sti/Kconfig" 1457 1458source "arch/arm/mach-stm32/Kconfig" 1459 1460source "arch/arm/mach-stm32mp/Kconfig" 1461 1462source "arch/arm/mach-sunxi/Kconfig" 1463 1464source "arch/arm/mach-tegra/Kconfig" 1465 1466source "arch/arm/mach-uniphier/Kconfig" 1467 1468source "arch/arm/cpu/armv7/vf610/Kconfig" 1469 1470source "arch/arm/mach-zynq/Kconfig" 1471 1472source "arch/arm/mach-versal/Kconfig" 1473 1474source "arch/arm/mach-zynqmp-r5/Kconfig" 1475 1476source "arch/arm/cpu/armv7/Kconfig" 1477 1478source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1479 1480source "arch/arm/cpu/armv8/Kconfig" 1481 1482source "arch/arm/mach-imx/Kconfig" 1483 1484source "board/bosch/shc/Kconfig" 1485source "board/CarMediaLab/flea3/Kconfig" 1486source "board/Marvell/aspenite/Kconfig" 1487source "board/Marvell/gplugd/Kconfig" 1488source "board/armadeus/apf27/Kconfig" 1489source "board/armltd/vexpress/Kconfig" 1490source "board/armltd/vexpress64/Kconfig" 1491source "board/broadcom/bcm23550_w1d/Kconfig" 1492source "board/broadcom/bcm28155_ap/Kconfig" 1493source "board/broadcom/bcmcygnus/Kconfig" 1494source "board/broadcom/bcmnsp/Kconfig" 1495source "board/broadcom/bcmns2/Kconfig" 1496source "board/cavium/thunderx/Kconfig" 1497source "board/cirrus/edb93xx/Kconfig" 1498source "board/eets/pdu001/Kconfig" 1499source "board/emulation/qemu-arm/Kconfig" 1500source "board/freescale/ls2080a/Kconfig" 1501source "board/freescale/ls2080aqds/Kconfig" 1502source "board/freescale/ls2080ardb/Kconfig" 1503source "board/freescale/ls1088a/Kconfig" 1504source "board/freescale/ls1021aqds/Kconfig" 1505source "board/freescale/ls1043aqds/Kconfig" 1506source "board/freescale/ls1021atwr/Kconfig" 1507source "board/freescale/ls1021aiot/Kconfig" 1508source "board/freescale/ls1046aqds/Kconfig" 1509source "board/freescale/ls1043ardb/Kconfig" 1510source "board/freescale/ls1046ardb/Kconfig" 1511source "board/freescale/ls1012aqds/Kconfig" 1512source "board/freescale/ls1012ardb/Kconfig" 1513source "board/freescale/ls1012afrdm/Kconfig" 1514source "board/freescale/mx35pdk/Kconfig" 1515source "board/freescale/s32v234evb/Kconfig" 1516source "board/grinn/chiliboard/Kconfig" 1517source "board/gumstix/pepper/Kconfig" 1518source "board/h2200/Kconfig" 1519source "board/hisilicon/hikey/Kconfig" 1520source "board/hisilicon/poplar/Kconfig" 1521source "board/isee/igep003x/Kconfig" 1522source "board/phytec/pcm051/Kconfig" 1523source "board/silica/pengwyn/Kconfig" 1524source "board/spear/spear300/Kconfig" 1525source "board/spear/spear310/Kconfig" 1526source "board/spear/spear320/Kconfig" 1527source "board/spear/spear600/Kconfig" 1528source "board/spear/x600/Kconfig" 1529source "board/st/stv0991/Kconfig" 1530source "board/tcl/sl50/Kconfig" 1531source "board/ucRobotics/bubblegum_96/Kconfig" 1532source "board/birdland/bav335x/Kconfig" 1533source "board/toradex/colibri_pxa270/Kconfig" 1534source "board/vscom/baltos/Kconfig" 1535source "board/woodburn/Kconfig" 1536source "board/xilinx/Kconfig" 1537source "board/xilinx/zynq/Kconfig" 1538source "board/xilinx/zynqmp/Kconfig" 1539source "board/zipitz2/Kconfig" 1540 1541source "arch/arm/Kconfig.debug" 1542 1543endmenu 1544 1545config SPL_LDSCRIPT 1546 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1547 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1548 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1549 1550 1551