1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22endif 23 24config STATIC_RELA 25 bool 26 default y if ARM64 && !POSITION_INDEPENDENT 27 28config DMA_ADDR_T_64BIT 29 bool 30 default y if ARM64 31 32config HAS_VBAR 33 bool 34 35config HAS_THUMB2 36 bool 37 38# Used for compatibility with asm files copied from the kernel 39config ARM_ASM_UNIFIED 40 bool 41 default y 42 43# Used for compatibility with asm files copied from the kernel 44config THUMB2_KERNEL 45 bool 46 47# If set, the workarounds for these ARM errata are applied early during U-Boot 48# startup. Note that in general these options force the workarounds to be 49# applied; no CPU-type/version detection exists, unlike the similar options in 50# the Linux kernel. Do not set these options unless they apply! Also note that 51# the following can be machine specific errata. These do have ability to 52# provide rudimentary version and machine specific checks, but expect no 53# product checks: 54# CONFIG_ARM_ERRATA_430973 55# CONFIG_ARM_ERRATA_454179 56# CONFIG_ARM_ERRATA_621766 57# CONFIG_ARM_ERRATA_798870 58# CONFIG_ARM_ERRATA_801819 59config ARM_ERRATA_430973 60 bool 61 62config ARM_ERRATA_454179 63 bool 64 65config ARM_ERRATA_621766 66 bool 67 68config ARM_ERRATA_716044 69 bool 70 71config ARM_ERRATA_725233 72 bool 73 74config ARM_ERRATA_742230 75 bool 76 77config ARM_ERRATA_743622 78 bool 79 80config ARM_ERRATA_751472 81 bool 82 83config ARM_ERRATA_761320 84 bool 85 86config ARM_ERRATA_773022 87 bool 88 89config ARM_ERRATA_774769 90 bool 91 92config ARM_ERRATA_794072 93 bool 94 95config ARM_ERRATA_798870 96 bool 97 98config ARM_ERRATA_801819 99 bool 100 101config ARM_ERRATA_826974 102 bool 103 104config ARM_ERRATA_828024 105 bool 106 107config ARM_ERRATA_829520 108 bool 109 110config ARM_ERRATA_833069 111 bool 112 113config ARM_ERRATA_833471 114 bool 115 116config ARM_ERRATA_845369 117 bool 118 119config ARM_ERRATA_852421 120 bool 121 122config ARM_ERRATA_852423 123 bool 124 125config CPU_ARM720T 126 bool 127 select SYS_CACHE_SHIFT_5 128 129config CPU_ARM920T 130 bool 131 select SYS_CACHE_SHIFT_5 132 133config CPU_ARM926EJS 134 bool 135 select SYS_CACHE_SHIFT_5 136 137config CPU_ARM946ES 138 bool 139 select SYS_CACHE_SHIFT_5 140 141config CPU_ARM1136 142 bool 143 select SYS_CACHE_SHIFT_5 144 145config CPU_ARM1176 146 bool 147 select HAS_VBAR 148 select SYS_CACHE_SHIFT_5 149 150config CPU_V7 151 bool 152 select HAS_VBAR 153 select HAS_THUMB2 154 select SYS_CACHE_SHIFT_6 155 156config CPU_V7M 157 bool 158 select HAS_THUMB2 159 select THUMB2_KERNEL 160 select SYS_CACHE_SHIFT_5 161 162config CPU_PXA 163 bool 164 select SYS_CACHE_SHIFT_5 165 166config CPU_SA1100 167 bool 168 select SYS_CACHE_SHIFT_5 169 170config SYS_CPU 171 default "arm720t" if CPU_ARM720T 172 default "arm920t" if CPU_ARM920T 173 default "arm926ejs" if CPU_ARM926EJS 174 default "arm946es" if CPU_ARM946ES 175 default "arm1136" if CPU_ARM1136 176 default "arm1176" if CPU_ARM1176 177 default "armv7" if CPU_V7 178 default "armv7m" if CPU_V7M 179 default "pxa" if CPU_PXA 180 default "sa1100" if CPU_SA1100 181 default "armv8" if ARM64 182 183config SYS_ARM_ARCH 184 int 185 default 4 if CPU_ARM720T 186 default 4 if CPU_ARM920T 187 default 5 if CPU_ARM926EJS 188 default 5 if CPU_ARM946ES 189 default 6 if CPU_ARM1136 190 default 6 if CPU_ARM1176 191 default 7 if CPU_V7 192 default 7 if CPU_V7M 193 default 5 if CPU_PXA 194 default 4 if CPU_SA1100 195 default 8 if ARM64 196 197config SYS_CACHE_SHIFT_5 198 bool 199 200config SYS_CACHE_SHIFT_6 201 bool 202 203config SYS_CACHE_SHIFT_7 204 bool 205 206config SYS_CACHELINE_SIZE 207 int 208 default 128 if SYS_CACHE_SHIFT_7 209 default 64 if SYS_CACHE_SHIFT_6 210 default 32 if SYS_CACHE_SHIFT_5 211 212config ARM_SMCCC 213 bool "Support for ARM SMC Calling Convention (SMCCC)" 214 depends on CPU_V7 || ARM64 215 select ARM_PSCI_FW 216 help 217 Say Y here if you want to enable ARM SMC Calling Convention. 218 This should be enabled if U-Boot needs to communicate with system 219 firmware (for example, PSCI) according to SMCCC. 220 221config SEMIHOSTING 222 bool "support boot from semihosting" 223 help 224 In emulated environments, semihosting is a way for 225 the hosted environment to call out to the emulator to 226 retrieve files from the host machine. 227 228config SYS_THUMB_BUILD 229 bool "Build U-Boot using the Thumb instruction set" 230 depends on !ARM64 231 help 232 Use this flag to build U-Boot using the Thumb instruction set for 233 ARM architectures. Thumb instruction set provides better code 234 density. For ARM architectures that support Thumb2 this flag will 235 result in Thumb2 code generated by GCC. 236 237config SPL_SYS_THUMB_BUILD 238 bool "Build SPL using the Thumb instruction set" 239 default y if SYS_THUMB_BUILD 240 depends on !ARM64 241 help 242 Use this flag to build SPL using the Thumb instruction set for 243 ARM architectures. Thumb instruction set provides better code 244 density. For ARM architectures that support Thumb2 this flag will 245 result in Thumb2 code generated by GCC. 246 247config SYS_L2CACHE_OFF 248 bool "L2cache off" 249 help 250 If SoC does not support L2CACHE or one do not want to enable 251 L2CACHE, choose this option. 252 253config ENABLE_ARM_SOC_BOOT0_HOOK 254 bool "prepare BOOT0 header" 255 help 256 If the SoC's BOOT0 requires a header area filled with (magic) 257 values, then choose this option, and create a define called 258 ARM_SOC_BOOT0_HOOK which contains the required assembler 259 preprocessor code. 260 261config ARM_CORTEX_CPU_IS_UP 262 bool 263 default n 264 265config USE_ARCH_MEMCPY 266 bool "Use an assembly optimized implementation of memcpy" 267 default y 268 depends on !ARM64 269 help 270 Enable the generation of an optimized version of memcpy. 271 Such implementation may be faster under some conditions 272 but may increase the binary size. 273 274config SPL_USE_ARCH_MEMCPY 275 bool "Use an assembly optimized implementation of memcpy for SPL" 276 default y if USE_ARCH_MEMCPY 277 depends on !ARM64 278 help 279 Enable the generation of an optimized version of memcpy. 280 Such implementation may be faster under some conditions 281 but may increase the binary size. 282 283config USE_ARCH_MEMSET 284 bool "Use an assembly optimized implementation of memset" 285 default y 286 depends on !ARM64 287 help 288 Enable the generation of an optimized version of memset. 289 Such implementation may be faster under some conditions 290 but may increase the binary size. 291 292config SPL_USE_ARCH_MEMSET 293 bool "Use an assembly optimized implementation of memset for SPL" 294 default y if USE_ARCH_MEMSET 295 depends on !ARM64 296 help 297 Enable the generation of an optimized version of memset. 298 Such implementation may be faster under some conditions 299 but may increase the binary size. 300 301config ARM64_SUPPORT_AARCH32 302 bool "ARM64 system support AArch32 execution state" 303 default y if ARM64 && !TARGET_THUNDERX_88XX 304 help 305 This ARM64 system supports AArch32 execution state. 306 307choice 308 prompt "Target select" 309 default TARGET_HIKEY 310 311config ARCH_AT91 312 bool "Atmel AT91" 313 select SPL_BOARD_INIT if SPL 314 315config TARGET_EDB93XX 316 bool "Support edb93xx" 317 select CPU_ARM920T 318 319config TARGET_ASPENITE 320 bool "Support aspenite" 321 select CPU_ARM926EJS 322 323config TARGET_GPLUGD 324 bool "Support gplugd" 325 select CPU_ARM926EJS 326 327config ARCH_DAVINCI 328 bool "TI DaVinci" 329 select CPU_ARM926EJS 330 imply CMD_SAVES 331 help 332 Support for TI's DaVinci platform. 333 334config KIRKWOOD 335 bool "Marvell Kirkwood" 336 select CPU_ARM926EJS 337 select BOARD_EARLY_INIT_F 338 select ARCH_MISC_INIT 339 340config ARCH_MVEBU 341 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 342 select OF_CONTROL 343 select OF_SEPARATE 344 select DM 345 select DM_ETH 346 select DM_SERIAL 347 select DM_SPI 348 select DM_SPI_FLASH 349 350config TARGET_DEVKIT3250 351 bool "Support devkit3250" 352 select CPU_ARM926EJS 353 select SUPPORT_SPL 354 355config TARGET_WORK_92105 356 bool "Support work_92105" 357 select CPU_ARM926EJS 358 select SUPPORT_SPL 359 360config TARGET_APF27 361 bool "Support apf27" 362 select CPU_ARM926EJS 363 select SUPPORT_SPL 364 365config TARGET_APX4DEVKIT 366 bool "Support apx4devkit" 367 select CPU_ARM926EJS 368 select SUPPORT_SPL 369 370config TARGET_XFI3 371 bool "Support xfi3" 372 select CPU_ARM926EJS 373 select SUPPORT_SPL 374 375config TARGET_M28EVK 376 bool "Support m28evk" 377 select CPU_ARM926EJS 378 select SUPPORT_SPL 379 380config TARGET_MX23EVK 381 bool "Support mx23evk" 382 select CPU_ARM926EJS 383 select SUPPORT_SPL 384 select BOARD_EARLY_INIT_F 385 386config TARGET_MX28EVK 387 bool "Support mx28evk" 388 select CPU_ARM926EJS 389 select SUPPORT_SPL 390 select BOARD_EARLY_INIT_F 391 392config TARGET_MX23_OLINUXINO 393 bool "Support mx23_olinuxino" 394 select CPU_ARM926EJS 395 select SUPPORT_SPL 396 select BOARD_EARLY_INIT_F 397 398config TARGET_BG0900 399 bool "Support bg0900" 400 select CPU_ARM926EJS 401 select SUPPORT_SPL 402 403config TARGET_SANSA_FUZE_PLUS 404 bool "Support sansa_fuze_plus" 405 select CPU_ARM926EJS 406 select SUPPORT_SPL 407 408config TARGET_SC_SPS_1 409 bool "Support sc_sps_1" 410 select CPU_ARM926EJS 411 select SUPPORT_SPL 412 413config ORION5X 414 bool "Marvell Orion" 415 select CPU_ARM926EJS 416 417config TARGET_SPEAR300 418 bool "Support spear300" 419 select CPU_ARM926EJS 420 select BOARD_EARLY_INIT_F 421 imply CMD_SAVES 422 423config TARGET_SPEAR310 424 bool "Support spear310" 425 select CPU_ARM926EJS 426 select BOARD_EARLY_INIT_F 427 imply CMD_SAVES 428 429config TARGET_SPEAR320 430 bool "Support spear320" 431 select CPU_ARM926EJS 432 select BOARD_EARLY_INIT_F 433 imply CMD_SAVES 434 435config TARGET_SPEAR600 436 bool "Support spear600" 437 select CPU_ARM926EJS 438 select BOARD_EARLY_INIT_F 439 imply CMD_SAVES 440 441config TARGET_STV0991 442 bool "Support stv0991" 443 select CPU_V7 444 select DM 445 select DM_SERIAL 446 select DM_SPI 447 select DM_SPI_FLASH 448 select SPI_FLASH 449 450config TARGET_X600 451 bool "Support x600" 452 select BOARD_LATE_INIT 453 select CPU_ARM926EJS 454 select SUPPORT_SPL 455 456config TARGET_IMX31_PHYCORE 457 bool "Support imx31_phycore_eet" 458 select CPU_ARM1136 459 select BOARD_EARLY_INIT_F 460 461config TARGET_IMX31_PHYCORE_EET 462 bool "Support imx31_phycore_eet" 463 select BOARD_LATE_INIT 464 select CPU_ARM1136 465 select BOARD_EARLY_INIT_F 466 467config TARGET_MX31ADS 468 bool "Support mx31ads" 469 select CPU_ARM1136 470 select BOARD_EARLY_INIT_F 471 472config TARGET_MX31PDK 473 bool "Support mx31pdk" 474 select BOARD_LATE_INIT 475 select CPU_ARM1136 476 select SUPPORT_SPL 477 select BOARD_EARLY_INIT_F 478 479config TARGET_WOODBURN 480 bool "Support woodburn" 481 select CPU_ARM1136 482 483config TARGET_WOODBURN_SD 484 bool "Support woodburn_sd" 485 select CPU_ARM1136 486 select SUPPORT_SPL 487 488config TARGET_FLEA3 489 bool "Support flea3" 490 select CPU_ARM1136 491 492config TARGET_MX35PDK 493 bool "Support mx35pdk" 494 select BOARD_LATE_INIT 495 select CPU_ARM1136 496 497config ARCH_BCM283X 498 bool "Broadcom BCM283X family" 499 select DM 500 select DM_SERIAL 501 select DM_GPIO 502 select OF_CONTROL 503 imply FAT_WRITE 504 505config TARGET_VEXPRESS_CA15_TC2 506 bool "Support vexpress_ca15_tc2" 507 select CPU_V7 508 select CPU_V7_HAS_NONSEC 509 select CPU_V7_HAS_VIRT 510 511config TARGET_VEXPRESS_CA5X2 512 bool "Support vexpress_ca5x2" 513 select CPU_V7 514 515config TARGET_VEXPRESS_CA9X4 516 bool "Support vexpress_ca9x4" 517 select CPU_V7 518 519config TARGET_BCM23550_W1D 520 bool "Support bcm23550_w1d" 521 select CPU_V7 522 imply CRC32_VERIFY 523 imply FAT_WRITE 524 525config TARGET_BCM28155_AP 526 bool "Support bcm28155_ap" 527 select CPU_V7 528 imply CRC32_VERIFY 529 imply FAT_WRITE 530 531config TARGET_BCMCYGNUS 532 bool "Support bcmcygnus" 533 select CPU_V7 534 imply CRC32_VERIFY 535 imply CMD_HASH 536 imply FAT_WRITE 537 imply HASH_VERIFY 538 imply NETDEVICES 539 imply BCM_SF2_ETH 540 imply BCM_SF2_ETH_GMAC 541 542config TARGET_BCMNSP 543 bool "Support bcmnsp" 544 select CPU_V7 545 546config TARGET_BCMNS2 547 bool "Support Broadcom Northstar2" 548 select ARM64 549 help 550 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 551 ARMv8 Cortex-A57 processors targeting a broad range of networking 552 applications 553 554config ARCH_EXYNOS 555 bool "Samsung EXYNOS" 556 select DM 557 select DM_I2C 558 select DM_SPI_FLASH 559 select DM_SERIAL 560 select DM_SPI 561 select DM_GPIO 562 select DM_KEYBOARD 563 imply FAT_WRITE 564 565config ARCH_S5PC1XX 566 bool "Samsung S5PC1XX" 567 select CPU_V7 568 select DM 569 select DM_SERIAL 570 select DM_GPIO 571 select DM_I2C 572 573config ARCH_HIGHBANK 574 bool "Calxeda Highbank" 575 select CPU_V7 576 577config ARCH_INTEGRATOR 578 bool "ARM Ltd. Integrator family" 579 select DM 580 select DM_SERIAL 581 582config ARCH_KEYSTONE 583 bool "TI Keystone" 584 select CPU_V7 585 select SUPPORT_SPL 586 select SYS_THUMB_BUILD 587 select CMD_POWEROFF 588 imply CMD_MTDPARTS 589 imply FIT 590 imply CMD_SAVES 591 592config ARCH_OMAP2PLUS 593 bool "TI OMAP2+" 594 select CPU_V7 595 select SPL_BOARD_INIT if SPL 596 select SPL_STACK_R if SPL 597 select SUPPORT_SPL 598 imply FIT 599 600config ARCH_MESON 601 bool "Amlogic Meson" 602 help 603 Support for the Meson SoC family developed by Amlogic Inc., 604 targeted at media players and tablet computers. We currently 605 support the S905 (GXBaby) 64-bit SoC. 606 607config ARCH_MX25 608 bool "NXP MX25" 609 select CPU_ARM926EJS 610 611config ARCH_MX7ULP 612 bool "NXP MX7ULP" 613 select CPU_V7 614 select ROM_UNIFIED_SECTIONS 615 616config ARCH_MX7 617 bool "Freescale MX7" 618 select CPU_V7 619 select SYS_FSL_HAS_SEC if SECURE_BOOT 620 select SYS_FSL_SEC_COMPAT_4 621 select SYS_FSL_SEC_LE 622 select BOARD_EARLY_INIT_F 623 select ARCH_MISC_INIT 624 625config ARCH_MX6 626 bool "Freescale MX6" 627 select CPU_V7 628 select SYS_FSL_HAS_SEC if SECURE_BOOT 629 select SYS_FSL_SEC_COMPAT_4 630 select SYS_FSL_SEC_LE 631 select SYS_THUMB_BUILD if SPL 632 633if ARCH_MX6 634config SPL_LDSCRIPT 635 default "arch/arm/mach-omap2/u-boot-spl.lds" 636endif 637 638config ARCH_MX5 639 bool "Freescale MX5" 640 select CPU_V7 641 select BOARD_EARLY_INIT_F 642 643config ARCH_QEMU 644 bool "QEMU Virtual Platform" 645 select CPU_V7 646 select ARCH_SUPPORT_PSCI 647 select DM 648 select DM_SERIAL 649 select OF_CONTROL 650 651config ARCH_RMOBILE 652 bool "Renesas ARM SoCs" 653 select DM 654 select DM_SERIAL 655 select BOARD_EARLY_INIT_F 656 imply FAT_WRITE 657 imply SYS_THUMB_BUILD 658 659config TARGET_S32V234EVB 660 bool "Support s32v234evb" 661 select ARM64 662 select SYS_FSL_ERRATUM_ESDHC111 663 664config ARCH_SNAPDRAGON 665 bool "Qualcomm Snapdragon SoCs" 666 select ARM64 667 select DM 668 select DM_GPIO 669 select DM_SERIAL 670 select SPMI 671 select OF_CONTROL 672 select OF_SEPARATE 673 674config ARCH_SOCFPGA 675 bool "Altera SOCFPGA family" 676 select CPU_V7 677 select SUPPORT_SPL 678 select OF_CONTROL 679 select SPL_OF_CONTROL 680 select DM 681 select DM_SPI_FLASH 682 select DM_SPI 683 select ENABLE_ARM_SOC_BOOT0_HOOK 684 select ARCH_EARLY_INIT_R 685 select ARCH_MISC_INIT 686 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 687 select SYS_THUMB_BUILD 688 imply CMD_MTDPARTS 689 imply CRC32_VERIFY 690 imply FAT_WRITE 691 692config ARCH_SUNXI 693 bool "Support sunxi (Allwinner) SoCs" 694 select BINMAN 695 select CMD_GPIO 696 select CMD_MMC if MMC 697 select CMD_USB if DISTRO_DEFAULTS 698 select DM 699 select DM_ETH 700 select DM_GPIO 701 select DM_KEYBOARD 702 select DM_SERIAL 703 select DM_USB if DISTRO_DEFAULTS 704 select OF_BOARD_SETUP 705 select OF_CONTROL 706 select OF_SEPARATE 707 select SPL_STACK_R if SPL 708 select SPL_SYS_MALLOC_SIMPLE if SPL 709 select SYS_NS16550 710 select SPL_SYS_THUMB_BUILD if !ARM64 711 select SYS_THUMB_BUILD if !ARM64 712 select USB if DISTRO_DEFAULTS 713 select USB_STORAGE if DISTRO_DEFAULTS 714 select USB_KEYBOARD if DISTRO_DEFAULTS 715 select USE_TINY_PRINTF 716 imply CMD_GPT 717 imply FAT_WRITE 718 imply PRE_CONSOLE_BUFFER 719 imply SPL_GPIO_SUPPORT 720 imply SPL_LIBCOMMON_SUPPORT 721 imply SPL_LIBDISK_SUPPORT 722 imply SPL_LIBGENERIC_SUPPORT 723 imply SPL_MMC_SUPPORT if MMC 724 imply SPL_POWER_SUPPORT 725 imply SPL_SERIAL_SUPPORT 726 imply USB_GADGET 727 728config TARGET_TS4600 729 bool "Support TS4600" 730 select CPU_ARM926EJS 731 select SUPPORT_SPL 732 733config ARCH_VF610 734 bool "Freescale Vybrid" 735 select CPU_V7 736 select SYS_FSL_ERRATUM_ESDHC111 737 imply CMD_MTDPARTS 738 imply NAND 739 740config ARCH_ZYNQ 741 bool "Xilinx Zynq Platform" 742 select BOARD_LATE_INIT 743 select CPU_V7 744 select SUPPORT_SPL 745 select OF_CONTROL 746 select SPL_BOARD_INIT if SPL 747 select SPL_OF_CONTROL if SPL 748 select DM 749 select DM_ETH 750 select DM_GPIO 751 select SPL_DM if SPL 752 select DM_MMC 753 select DM_SPI 754 select DM_SERIAL 755 select DM_SPI_FLASH 756 select SPL_SEPARATE_BSS if SPL 757 select DM_USB if USB 758 select BLK 759 select CLK 760 select SPL_CLK 761 select CLK_ZYNQ 762 imply CMD_CLK 763 imply FAT_WRITE 764 imply CMD_SPL 765 766config ARCH_ZYNQMP 767 bool "Support Xilinx ZynqMP Platform" 768 select ARM64 769 select BOARD_LATE_INIT 770 select DM 771 select OF_CONTROL 772 select DM_SERIAL 773 select SUPPORT_SPL 774 select CLK 775 select SPL_BOARD_INIT if SPL 776 select SPL_CLK 777 select DM_USB if USB 778 imply FAT_WRITE 779 780config TEGRA 781 bool "NVIDIA Tegra" 782 imply FAT_WRITE 783 784config TARGET_VEXPRESS64_AEMV8A 785 bool "Support vexpress_aemv8a" 786 select ARM64 787 788config TARGET_VEXPRESS64_BASE_FVP 789 bool "Support Versatile Express ARMv8a FVP BASE model" 790 select ARM64 791 select SEMIHOSTING 792 793config TARGET_VEXPRESS64_BASE_FVP_DRAM 794 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 795 select ARM64 796 help 797 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 798 the default config to allow the user to load the images directly into 799 DRAM using model parameters rather than by using semi-hosting to load 800 the files from the host filesystem. 801 802config TARGET_VEXPRESS64_JUNO 803 bool "Support Versatile Express Juno Development Platform" 804 select ARM64 805 806config TARGET_LS2080A_EMU 807 bool "Support ls2080a_emu" 808 select ARCH_LS2080A 809 select ARM64 810 select ARMV8_MULTIENTRY 811 select ARCH_MISC_INIT 812 help 813 Support for Freescale LS2080A_EMU platform 814 The LS2080A Development System (EMULATOR) is a pre silicon 815 development platform that supports the QorIQ LS2080A 816 Layerscape Architecture processor. 817 818config TARGET_LS2080A_SIMU 819 bool "Support ls2080a_simu" 820 select ARCH_LS2080A 821 select ARM64 822 select ARMV8_MULTIENTRY 823 select ARCH_MISC_INIT 824 help 825 Support for Freescale LS2080A_SIMU platform 826 The LS2080A Development System (QDS) is a pre silicon 827 development platform that supports the QorIQ LS2080A 828 Layerscape Architecture processor. 829 830config TARGET_LS1088AQDS 831 bool "Support ls1088aqds" 832 select ARCH_LS1088A 833 select ARM64 834 select ARMV8_MULTIENTRY 835 select ARCH_MISC_INIT 836 select BOARD_LATE_INIT 837 select SUPPORT_SPL 838 help 839 Support for NXP LS1088AQDS platform 840 The LS1088A Development System (QDS) is a high-performance 841 development platform that supports the QorIQ LS1088A 842 Layerscape Architecture processor. 843 844config TARGET_LS2080AQDS 845 bool "Support ls2080aqds" 846 select ARCH_LS2080A 847 select ARM64 848 select ARMV8_MULTIENTRY 849 select BOARD_LATE_INIT 850 select SUPPORT_SPL 851 select ARCH_MISC_INIT 852 imply SCSI 853 help 854 Support for Freescale LS2080AQDS platform 855 The LS2080A Development System (QDS) is a high-performance 856 development platform that supports the QorIQ LS2080A 857 Layerscape Architecture processor. 858 859config TARGET_LS2080ARDB 860 bool "Support ls2080ardb" 861 select ARCH_LS2080A 862 select ARM64 863 select ARMV8_MULTIENTRY 864 select BOARD_LATE_INIT 865 select SUPPORT_SPL 866 select ARCH_MISC_INIT 867 imply SCSI 868 help 869 Support for Freescale LS2080ARDB platform. 870 The LS2080A Reference design board (RDB) is a high-performance 871 development platform that supports the QorIQ LS2080A 872 Layerscape Architecture processor. 873 874config TARGET_LS2081ARDB 875 bool "Support ls2081ardb" 876 select ARCH_LS2080A 877 select ARM64 878 select ARMV8_MULTIENTRY 879 select BOARD_LATE_INIT 880 select SUPPORT_SPL 881 select ARCH_MISC_INIT 882 help 883 Support for Freescale LS2081ARDB platform. 884 The LS2081A Reference design board (RDB) is a high-performance 885 development platform that supports the QorIQ LS2081A/LS2041A 886 Layerscape Architecture processor. 887 888config TARGET_HIKEY 889 bool "Support HiKey 96boards Consumer Edition Platform" 890 select ARM64 891 select DM 892 select DM_GPIO 893 select DM_SERIAL 894 select OF_CONTROL 895 help 896 Support for HiKey 96boards platform. It features a HI6220 897 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 898 899config TARGET_POPLAR 900 bool "Support Poplar 96boards Enterprise Edition Platform" 901 select ARM64 902 select DM 903 select OF_CONTROL 904 select DM_SERIAL 905 select DM_USB 906 help 907 Support for Poplar 96boards EE platform. It features a HI3798cv200 908 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 909 making it capable of running any commercial set-top solution based on 910 Linux or Android. 911 912config TARGET_LS1012AQDS 913 bool "Support ls1012aqds" 914 select ARCH_LS1012A 915 select ARM64 916 select BOARD_LATE_INIT 917 help 918 Support for Freescale LS1012AQDS platform. 919 The LS1012A Development System (QDS) is a high-performance 920 development platform that supports the QorIQ LS1012A 921 Layerscape Architecture processor. 922 923config TARGET_LS1012ARDB 924 bool "Support ls1012ardb" 925 select ARCH_LS1012A 926 select ARM64 927 select BOARD_LATE_INIT 928 imply SCSI 929 help 930 Support for Freescale LS1012ARDB platform. 931 The LS1012A Reference design board (RDB) is a high-performance 932 development platform that supports the QorIQ LS1012A 933 Layerscape Architecture processor. 934 935config TARGET_LS1012AFRDM 936 bool "Support ls1012afrdm" 937 select ARCH_LS1012A 938 select ARM64 939 help 940 Support for Freescale LS1012AFRDM platform. 941 The LS1012A Freedom board (FRDM) is a high-performance 942 development platform that supports the QorIQ LS1012A 943 Layerscape Architecture processor. 944 945config TARGET_LS1088ARDB 946 bool "Support ls1088ardb" 947 select ARCH_LS1088A 948 select ARM64 949 select ARMV8_MULTIENTRY 950 select ARCH_MISC_INIT 951 select BOARD_LATE_INIT 952 select SUPPORT_SPL 953 help 954 Support for NXP LS1088ARDB platform. 955 The LS1088A Reference design board (RDB) is a high-performance 956 development platform that supports the QorIQ LS1088A 957 Layerscape Architecture processor. 958 959config TARGET_LS1021AQDS 960 bool "Support ls1021aqds" 961 select BOARD_LATE_INIT 962 select CPU_V7 963 select CPU_V7_HAS_NONSEC 964 select CPU_V7_HAS_VIRT 965 select SUPPORT_SPL 966 select ARCH_LS1021A 967 select ARCH_SUPPORT_PSCI 968 select LS1_DEEP_SLEEP 969 select SYS_FSL_DDR 970 select BOARD_EARLY_INIT_F 971 imply SCSI 972 973config TARGET_LS1021ATWR 974 bool "Support ls1021atwr" 975 select BOARD_LATE_INIT 976 select CPU_V7 977 select CPU_V7_HAS_NONSEC 978 select CPU_V7_HAS_VIRT 979 select SUPPORT_SPL 980 select ARCH_LS1021A 981 select ARCH_SUPPORT_PSCI 982 select LS1_DEEP_SLEEP 983 select BOARD_EARLY_INIT_F 984 imply SCSI 985 986config TARGET_LS1021AIOT 987 bool "Support ls1021aiot" 988 select BOARD_LATE_INIT 989 select CPU_V7 990 select CPU_V7_HAS_NONSEC 991 select CPU_V7_HAS_VIRT 992 select SUPPORT_SPL 993 select ARCH_LS1021A 994 select ARCH_SUPPORT_PSCI 995 imply SCSI 996 help 997 Support for Freescale LS1021AIOT platform. 998 The LS1021A Freescale board (IOT) is a high-performance 999 development platform that supports the QorIQ LS1021A 1000 Layerscape Architecture processor. 1001 1002config TARGET_LS1043AQDS 1003 bool "Support ls1043aqds" 1004 select ARCH_LS1043A 1005 select ARM64 1006 select ARMV8_MULTIENTRY 1007 select BOARD_LATE_INIT 1008 select SUPPORT_SPL 1009 select BOARD_EARLY_INIT_F 1010 imply SCSI 1011 help 1012 Support for Freescale LS1043AQDS platform. 1013 1014config TARGET_LS1043ARDB 1015 bool "Support ls1043ardb" 1016 select ARCH_LS1043A 1017 select ARM64 1018 select ARMV8_MULTIENTRY 1019 select BOARD_LATE_INIT 1020 select SUPPORT_SPL 1021 select BOARD_EARLY_INIT_F 1022 imply SCSI 1023 help 1024 Support for Freescale LS1043ARDB platform. 1025 1026config TARGET_LS1046AQDS 1027 bool "Support ls1046aqds" 1028 select ARCH_LS1046A 1029 select ARM64 1030 select ARMV8_MULTIENTRY 1031 select BOARD_LATE_INIT 1032 select SUPPORT_SPL 1033 select DM_SPI_FLASH if DM_SPI 1034 select BOARD_EARLY_INIT_F 1035 imply SCSI 1036 help 1037 Support for Freescale LS1046AQDS platform. 1038 The LS1046A Development System (QDS) is a high-performance 1039 development platform that supports the QorIQ LS1046A 1040 Layerscape Architecture processor. 1041 1042config TARGET_LS1046ARDB 1043 bool "Support ls1046ardb" 1044 select ARCH_LS1046A 1045 select ARM64 1046 select ARMV8_MULTIENTRY 1047 select BOARD_LATE_INIT 1048 select SUPPORT_SPL 1049 select DM_SPI_FLASH if DM_SPI 1050 select POWER_MC34VR500 1051 select BOARD_EARLY_INIT_F 1052 imply SCSI 1053 help 1054 Support for Freescale LS1046ARDB platform. 1055 The LS1046A Reference Design Board (RDB) is a high-performance 1056 development platform that supports the QorIQ LS1046A 1057 Layerscape Architecture processor. 1058 1059config TARGET_H2200 1060 bool "Support h2200" 1061 select CPU_PXA 1062 1063config TARGET_ZIPITZ2 1064 bool "Support zipitz2" 1065 select CPU_PXA 1066 1067config TARGET_COLIBRI_PXA270 1068 bool "Support colibri_pxa270" 1069 select CPU_PXA 1070 1071config ARCH_UNIPHIER 1072 bool "Socionext UniPhier SoCs" 1073 select BOARD_LATE_INIT 1074 select DM 1075 select DM_GPIO 1076 select DM_I2C 1077 select DM_MMC 1078 select DM_RESET 1079 select DM_SERIAL 1080 select DM_USB 1081 select OF_CONTROL 1082 select OF_LIBFDT 1083 select PINCTRL 1084 select SPL_BOARD_INIT if SPL 1085 select SPL_DM if SPL 1086 select SPL_LIBCOMMON_SUPPORT if SPL 1087 select SPL_LIBGENERIC_SUPPORT if SPL 1088 select SPL_OF_CONTROL if SPL 1089 select SPL_PINCTRL if SPL 1090 select SUPPORT_SPL 1091 imply FAT_WRITE 1092 help 1093 Support for UniPhier SoC family developed by Socionext Inc. 1094 (formerly, System LSI Business Division of Panasonic Corporation) 1095 1096config STM32 1097 bool "Support STM32" 1098 select CPU_V7M 1099 select DM 1100 select DM_SERIAL 1101 select SYS_THUMB_BUILD 1102 1103config ARCH_STI 1104 bool "Support STMicrolectronics SoCs" 1105 select CPU_V7 1106 select DM 1107 select DM_SERIAL 1108 select BLK 1109 select DM_MMC 1110 select DM_RESET 1111 help 1112 Support for STMicroelectronics STiH407/10 SoC family. 1113 This SoC is used on Linaro 96Board STiH410-B2260 1114 1115config ARCH_ROCKCHIP 1116 bool "Support Rockchip SoCs" 1117 select OF_CONTROL 1118 select BLK 1119 select DM 1120 select SPL_DM if SPL 1121 select SYS_MALLOC_F 1122 select SYS_THUMB_BUILD if !ARM64 1123 select SPL_SYS_MALLOC_SIMPLE if SPL 1124 select DM_GPIO 1125 select DM_I2C 1126 select DM_MMC 1127 select DM_SERIAL 1128 select DM_SPI 1129 select DM_SPI_FLASH 1130 select DM_USB if USB 1131 select DM_PWM 1132 select DM_REGULATOR 1133 select ENABLE_ARM_SOC_BOOT0_HOOK 1134 imply CMD_FASTBOOT 1135 imply FASTBOOT 1136 imply FAT_WRITE 1137 imply USB_FUNCTION_FASTBOOT 1138 imply SPL_SYSRESET 1139 imply TPL_SYSRESET 1140 imply ADC 1141 imply SARADC_ROCKCHIP 1142 1143config TARGET_THUNDERX_88XX 1144 bool "Support ThunderX 88xx" 1145 select ARM64 1146 select OF_CONTROL 1147 select SYS_CACHE_SHIFT_7 1148 1149config ARCH_ASPEED 1150 bool "Support Aspeed SoCs" 1151 select OF_CONTROL 1152 select DM 1153 1154endchoice 1155 1156source "arch/arm/mach-aspeed/Kconfig" 1157 1158source "arch/arm/mach-at91/Kconfig" 1159 1160source "arch/arm/mach-bcm283x/Kconfig" 1161 1162source "arch/arm/mach-davinci/Kconfig" 1163 1164source "arch/arm/mach-exynos/Kconfig" 1165 1166source "arch/arm/mach-highbank/Kconfig" 1167 1168source "arch/arm/mach-integrator/Kconfig" 1169 1170source "arch/arm/mach-keystone/Kconfig" 1171 1172source "arch/arm/mach-kirkwood/Kconfig" 1173 1174source "arch/arm/mach-mvebu/Kconfig" 1175 1176source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1177 1178source "arch/arm/mach-imx/mx2/Kconfig" 1179 1180source "arch/arm/mach-imx/mx7ulp/Kconfig" 1181 1182source "arch/arm/mach-imx/mx7/Kconfig" 1183 1184source "arch/arm/mach-imx/mx6/Kconfig" 1185 1186source "arch/arm/mach-imx/mx5/Kconfig" 1187 1188source "arch/arm/mach-omap2/Kconfig" 1189 1190source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1191 1192source "arch/arm/mach-orion5x/Kconfig" 1193 1194source "arch/arm/mach-rmobile/Kconfig" 1195 1196source "arch/arm/mach-meson/Kconfig" 1197 1198source "arch/arm/mach-qemu/Kconfig" 1199 1200source "arch/arm/mach-rockchip/Kconfig" 1201 1202source "arch/arm/mach-s5pc1xx/Kconfig" 1203 1204source "arch/arm/mach-snapdragon/Kconfig" 1205 1206source "arch/arm/mach-socfpga/Kconfig" 1207 1208source "arch/arm/mach-sti/Kconfig" 1209 1210source "arch/arm/mach-stm32/Kconfig" 1211 1212source "arch/arm/mach-sunxi/Kconfig" 1213 1214source "arch/arm/mach-tegra/Kconfig" 1215 1216source "arch/arm/mach-uniphier/Kconfig" 1217 1218source "arch/arm/cpu/armv7/vf610/Kconfig" 1219 1220source "arch/arm/mach-zynq/Kconfig" 1221 1222source "arch/arm/cpu/armv7/Kconfig" 1223 1224source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1225 1226source "arch/arm/cpu/armv8/Kconfig" 1227 1228source "arch/arm/mach-imx/Kconfig" 1229 1230source "board/aries/m28evk/Kconfig" 1231source "board/bosch/shc/Kconfig" 1232source "board/CarMediaLab/flea3/Kconfig" 1233source "board/Marvell/aspenite/Kconfig" 1234source "board/Marvell/gplugd/Kconfig" 1235source "board/armadeus/apf27/Kconfig" 1236source "board/armltd/vexpress/Kconfig" 1237source "board/armltd/vexpress64/Kconfig" 1238source "board/bluegiga/apx4devkit/Kconfig" 1239source "board/broadcom/bcm23550_w1d/Kconfig" 1240source "board/broadcom/bcm28155_ap/Kconfig" 1241source "board/broadcom/bcmcygnus/Kconfig" 1242source "board/broadcom/bcmnsp/Kconfig" 1243source "board/broadcom/bcmns2/Kconfig" 1244source "board/cavium/thunderx/Kconfig" 1245source "board/cirrus/edb93xx/Kconfig" 1246source "board/creative/xfi3/Kconfig" 1247source "board/freescale/ls2080a/Kconfig" 1248source "board/freescale/ls2080aqds/Kconfig" 1249source "board/freescale/ls2080ardb/Kconfig" 1250source "board/freescale/ls1088a/Kconfig" 1251source "board/freescale/ls1021aqds/Kconfig" 1252source "board/freescale/ls1043aqds/Kconfig" 1253source "board/freescale/ls1021atwr/Kconfig" 1254source "board/freescale/ls1021aiot/Kconfig" 1255source "board/freescale/ls1046aqds/Kconfig" 1256source "board/freescale/ls1043ardb/Kconfig" 1257source "board/freescale/ls1046ardb/Kconfig" 1258source "board/freescale/ls1012aqds/Kconfig" 1259source "board/freescale/ls1012ardb/Kconfig" 1260source "board/freescale/ls1012afrdm/Kconfig" 1261source "board/freescale/mx23evk/Kconfig" 1262source "board/freescale/mx28evk/Kconfig" 1263source "board/freescale/mx31ads/Kconfig" 1264source "board/freescale/mx31pdk/Kconfig" 1265source "board/freescale/mx35pdk/Kconfig" 1266source "board/freescale/s32v234evb/Kconfig" 1267source "board/gdsys/a38x/Kconfig" 1268source "board/grinn/chiliboard/Kconfig" 1269source "board/gumstix/pepper/Kconfig" 1270source "board/h2200/Kconfig" 1271source "board/hisilicon/hikey/Kconfig" 1272source "board/hisilicon/poplar/Kconfig" 1273source "board/imx31_phycore/Kconfig" 1274source "board/isee/igep003x/Kconfig" 1275source "board/olimex/mx23_olinuxino/Kconfig" 1276source "board/phytec/pcm051/Kconfig" 1277source "board/ppcag/bg0900/Kconfig" 1278source "board/sandisk/sansa_fuze_plus/Kconfig" 1279source "board/schulercontrol/sc_sps_1/Kconfig" 1280source "board/silica/pengwyn/Kconfig" 1281source "board/spear/spear300/Kconfig" 1282source "board/spear/spear310/Kconfig" 1283source "board/spear/spear320/Kconfig" 1284source "board/spear/spear600/Kconfig" 1285source "board/spear/x600/Kconfig" 1286source "board/st/stv0991/Kconfig" 1287source "board/tcl/sl50/Kconfig" 1288source "board/birdland/bav335x/Kconfig" 1289source "board/timll/devkit3250/Kconfig" 1290source "board/toradex/colibri_pxa270/Kconfig" 1291source "board/technologic/ts4600/Kconfig" 1292source "board/vscom/baltos/Kconfig" 1293source "board/woodburn/Kconfig" 1294source "board/work-microwave/work_92105/Kconfig" 1295source "board/zipitz2/Kconfig" 1296 1297source "arch/arm/Kconfig.debug" 1298 1299endmenu 1300 1301config SPL_LDSCRIPT 1302 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 1303 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1304 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1305 1306 1307