1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_DEVKIT3250 447 bool "Support devkit3250" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config TARGET_WORK_92105 452 bool "Support work_92105" 453 select CPU_ARM926EJS 454 select SUPPORT_SPL 455 456config TARGET_APF27 457 bool "Support apf27" 458 select CPU_ARM926EJS 459 select SUPPORT_SPL 460 461config ORION5X 462 bool "Marvell Orion" 463 select CPU_ARM926EJS 464 465config TARGET_SPEAR300 466 bool "Support spear300" 467 select BOARD_EARLY_INIT_F 468 select CPU_ARM926EJS 469 select PL011_SERIAL 470 imply CMD_SAVES 471 472config TARGET_SPEAR310 473 bool "Support spear310" 474 select BOARD_EARLY_INIT_F 475 select CPU_ARM926EJS 476 select PL011_SERIAL 477 imply CMD_SAVES 478 479config TARGET_SPEAR320 480 bool "Support spear320" 481 select BOARD_EARLY_INIT_F 482 select CPU_ARM926EJS 483 select PL011_SERIAL 484 imply CMD_SAVES 485 486config TARGET_SPEAR600 487 bool "Support spear600" 488 select BOARD_EARLY_INIT_F 489 select CPU_ARM926EJS 490 select PL011_SERIAL 491 imply CMD_SAVES 492 493config TARGET_STV0991 494 bool "Support stv0991" 495 select CPU_V7A 496 select DM 497 select DM_SERIAL 498 select DM_SPI 499 select DM_SPI_FLASH 500 select PL01X_SERIAL 501 select SPI 502 select SPI_FLASH 503 imply CMD_DM 504 505config TARGET_X600 506 bool "Support x600" 507 select BOARD_LATE_INIT 508 select CPU_ARM926EJS 509 select PL011_SERIAL 510 select SUPPORT_SPL 511 512config TARGET_WOODBURN 513 bool "Support woodburn" 514 select CPU_ARM1136 515 516config TARGET_WOODBURN_SD 517 bool "Support woodburn_sd" 518 select CPU_ARM1136 519 select SUPPORT_SPL 520 521config TARGET_FLEA3 522 bool "Support flea3" 523 select CPU_ARM1136 524 525config TARGET_MX35PDK 526 bool "Support mx35pdk" 527 select BOARD_LATE_INIT 528 select CPU_ARM1136 529 530config ARCH_BCM283X 531 bool "Broadcom BCM283X family" 532 select DM 533 select DM_GPIO 534 select DM_SERIAL 535 select OF_CONTROL 536 select PL01X_SERIAL 537 select SERIAL_SEARCH_ALL 538 imply CMD_DM 539 imply FAT_WRITE 540 541config TARGET_VEXPRESS_CA15_TC2 542 bool "Support vexpress_ca15_tc2" 543 select CPU_V7A 544 select CPU_V7_HAS_NONSEC 545 select CPU_V7_HAS_VIRT 546 select PL011_SERIAL 547 548config ARCH_BCMSTB 549 bool "Broadcom BCM7XXX family" 550 select CPU_V7A 551 select DM 552 select OF_CONTROL 553 select OF_PRIOR_STAGE 554 imply CMD_DM 555 help 556 This enables support for Broadcom ARM-based set-top box 557 chipsets, including the 7445 family of chips. 558 559config TARGET_VEXPRESS_CA5X2 560 bool "Support vexpress_ca5x2" 561 select CPU_V7A 562 select PL011_SERIAL 563 564config TARGET_VEXPRESS_CA9X4 565 bool "Support vexpress_ca9x4" 566 select CPU_V7A 567 select PL011_SERIAL 568 569config TARGET_BCM23550_W1D 570 bool "Support bcm23550_w1d" 571 select CPU_V7A 572 imply CRC32_VERIFY 573 imply FAT_WRITE 574 575config TARGET_BCM28155_AP 576 bool "Support bcm28155_ap" 577 select CPU_V7A 578 imply CRC32_VERIFY 579 imply FAT_WRITE 580 581config TARGET_BCMCYGNUS 582 bool "Support bcmcygnus" 583 select CPU_V7A 584 imply BCM_SF2_ETH 585 imply BCM_SF2_ETH_GMAC 586 imply CMD_HASH 587 imply CRC32_VERIFY 588 imply FAT_WRITE 589 imply HASH_VERIFY 590 imply NETDEVICES 591 592config TARGET_BCMNSP 593 bool "Support bcmnsp" 594 select CPU_V7A 595 596config TARGET_BCMNS2 597 bool "Support Broadcom Northstar2" 598 select ARM64 599 help 600 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 601 ARMv8 Cortex-A57 processors targeting a broad range of networking 602 applications 603 604config ARCH_EXYNOS 605 bool "Samsung EXYNOS" 606 select DM 607 select DM_GPIO 608 select DM_I2C 609 select DM_KEYBOARD 610 select DM_SERIAL 611 select DM_SPI 612 select DM_SPI_FLASH 613 select SPI 614 imply CMD_DM 615 imply FAT_WRITE 616 617config ARCH_S5PC1XX 618 bool "Samsung S5PC1XX" 619 select CPU_V7A 620 select DM 621 select DM_GPIO 622 select DM_I2C 623 select DM_SERIAL 624 imply CMD_DM 625 626config ARCH_HIGHBANK 627 bool "Calxeda Highbank" 628 select CPU_V7A 629 select PL011_SERIAL 630 631config ARCH_INTEGRATOR 632 bool "ARM Ltd. Integrator family" 633 select DM 634 select DM_SERIAL 635 select PL01X_SERIAL 636 imply CMD_DM 637 638config ARCH_KEYSTONE 639 bool "TI Keystone" 640 select CMD_POWEROFF 641 select CPU_V7A 642 select SUPPORT_SPL 643 select SYS_ARCH_TIMER 644 select SYS_THUMB_BUILD 645 imply CMD_MTDPARTS 646 imply CMD_SAVES 647 imply FIT 648 649config ARCH_OMAP2PLUS 650 bool "TI OMAP2+" 651 select CPU_V7A 652 select SPL_BOARD_INIT if SPL 653 select SPL_STACK_R if SPL 654 select SUPPORT_SPL 655 imply FIT 656 657config ARCH_MESON 658 bool "Amlogic Meson" 659 imply DISTRO_DEFAULTS 660 help 661 Support for the Meson SoC family developed by Amlogic Inc., 662 targeted at media players and tablet computers. We currently 663 support the S905 (GXBaby) 64-bit SoC. 664 665config ARCH_MX8M 666 bool "NXP i.MX8M platform" 667 select ARM64 668 select DM 669 select SUPPORT_SPL 670 imply CMD_DM 671 672config ARCH_MX23 673 bool "NXP i.MX23 family" 674 select CPU_ARM926EJS 675 select PL011_SERIAL 676 select SUPPORT_SPL 677 678config ARCH_MX25 679 bool "NXP MX25" 680 select CPU_ARM926EJS 681 imply MXC_GPIO 682 683config ARCH_MX28 684 bool "NXP i.MX28 family" 685 select CPU_ARM926EJS 686 select PL011_SERIAL 687 select SUPPORT_SPL 688 689config ARCH_MX31 690 bool "NXP i.MX31 family" 691 select CPU_ARM1136 692 693config ARCH_MX7ULP 694 bool "NXP MX7ULP" 695 select CPU_V7A 696 select ROM_UNIFIED_SECTIONS 697 imply MXC_GPIO 698 699config ARCH_MX7 700 bool "Freescale MX7" 701 select ARCH_MISC_INIT 702 select BOARD_EARLY_INIT_F 703 select CPU_V7A 704 select SYS_FSL_HAS_SEC if SECURE_BOOT 705 select SYS_FSL_SEC_COMPAT_4 706 select SYS_FSL_SEC_LE 707 imply MXC_GPIO 708 709config ARCH_MX6 710 bool "Freescale MX6" 711 select CPU_V7A 712 select SYS_FSL_HAS_SEC if SECURE_BOOT 713 select SYS_FSL_SEC_COMPAT_4 714 select SYS_FSL_SEC_LE 715 select SYS_THUMB_BUILD if SPL 716 imply MXC_GPIO 717 718if ARCH_MX6 719config SPL_LDSCRIPT 720 default "arch/arm/mach-omap2/u-boot-spl.lds" 721endif 722 723config ARCH_MX5 724 bool "Freescale MX5" 725 select BOARD_EARLY_INIT_F 726 select CPU_V7A 727 imply MXC_GPIO 728 729config ARCH_OWL 730 bool "Actions Semi OWL SoCs" 731 select ARM64 732 select DM 733 select DM_SERIAL 734 select OF_CONTROL 735 imply CMD_DM 736 737config ARCH_QEMU 738 bool "QEMU Virtual Platform" 739 select DM 740 select DM_SERIAL 741 select OF_CONTROL 742 select PL01X_SERIAL 743 imply CMD_DM 744 745config ARCH_RMOBILE 746 bool "Renesas ARM SoCs" 747 select BOARD_EARLY_INIT_F 748 select DM 749 select DM_SERIAL 750 imply CMD_DM 751 imply FAT_WRITE 752 imply SYS_THUMB_BUILD 753 754config TARGET_S32V234EVB 755 bool "Support s32v234evb" 756 select ARM64 757 select SYS_FSL_ERRATUM_ESDHC111 758 759config ARCH_SNAPDRAGON 760 bool "Qualcomm Snapdragon SoCs" 761 select ARM64 762 select DM 763 select DM_GPIO 764 select DM_SERIAL 765 select MSM_SMEM 766 select OF_CONTROL 767 select OF_SEPARATE 768 select SMEM 769 select SPMI 770 imply CMD_DM 771 772config ARCH_SOCFPGA 773 bool "Altera SOCFPGA family" 774 select ARCH_EARLY_INIT_R 775 select ARCH_MISC_INIT 776 select ARM64 if TARGET_SOCFPGA_STRATIX10 777 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 778 select DM 779 select DM_SERIAL 780 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 781 select OF_CONTROL 782 select SPL_DM_RESET if DM_RESET 783 select SPL_DM_SERIAL 784 select SPL_LIBCOMMON_SUPPORT 785 select SPL_LIBDISK_SUPPORT 786 select SPL_LIBGENERIC_SUPPORT 787 select SPL_MMC_SUPPORT if DM_MMC 788 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 789 select SPL_OF_CONTROL 790 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 791 select SPL_SERIAL_SUPPORT 792 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 793 select SPL_SPI_SUPPORT if DM_SPI 794 select SPL_WATCHDOG_SUPPORT 795 select SUPPORT_SPL 796 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 797 select SYS_NS16550 798 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 799 imply CMD_DM 800 imply CMD_MTDPARTS 801 imply CRC32_VERIFY 802 imply DM_SPI 803 imply DM_SPI_FLASH 804 imply FAT_WRITE 805 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 806 807config ARCH_SUNXI 808 bool "Support sunxi (Allwinner) SoCs" 809 select BINMAN 810 select CMD_GPIO 811 select CMD_MMC if MMC 812 select CMD_USB if DISTRO_DEFAULTS 813 select DM 814 select DM_ETH 815 select DM_GPIO 816 select DM_KEYBOARD 817 select DM_SERIAL 818 select DM_USB if DISTRO_DEFAULTS 819 select OF_BOARD_SETUP 820 select OF_CONTROL 821 select OF_SEPARATE 822 select SPECIFY_CONSOLE_INDEX 823 select SPL_STACK_R if SPL 824 select SPL_SYS_MALLOC_SIMPLE if SPL 825 select SPL_SYS_THUMB_BUILD if !ARM64 826 select SYS_NS16550 827 select SYS_THUMB_BUILD if !ARM64 828 select USB if DISTRO_DEFAULTS 829 select USB_KEYBOARD if DISTRO_DEFAULTS 830 select USB_STORAGE if DISTRO_DEFAULTS 831 select USE_TINY_PRINTF 832 imply CMD_DM 833 imply CMD_GPT 834 imply DISTRO_DEFAULTS 835 imply FAT_WRITE 836 imply OF_LIBFDT_OVERLAY 837 imply PRE_CONSOLE_BUFFER 838 imply SPL_GPIO_SUPPORT 839 imply SPL_LIBCOMMON_SUPPORT 840 imply SPL_LIBDISK_SUPPORT 841 imply SPL_LIBGENERIC_SUPPORT 842 imply SPL_MMC_SUPPORT if MMC 843 imply SPL_POWER_SUPPORT 844 imply SPL_SERIAL_SUPPORT 845 imply USB_GADGET 846 847config ARCH_VF610 848 bool "Freescale Vybrid" 849 select CPU_V7A 850 select SYS_FSL_ERRATUM_ESDHC111 851 imply CMD_MTDPARTS 852 imply NAND 853 854config ARCH_ZYNQ 855 bool "Xilinx Zynq based platform" 856 select BOARD_EARLY_INIT_F if WDT 857 select BOARD_LATE_INIT 858 select CLK 859 select CLK_ZYNQ 860 select CPU_V7A 861 select DM 862 select DM_ETH if NET 863 select DM_MMC if MMC 864 select DM_SERIAL 865 select DM_SPI 866 select DM_SPI_FLASH 867 select DM_USB if USB 868 select OF_CONTROL 869 select SPI 870 select SPL_BOARD_INIT if SPL 871 select SPL_CLK if SPL 872 select SPL_DM if SPL 873 select SPL_OF_CONTROL if SPL 874 select SPL_SEPARATE_BSS if SPL 875 select SUPPORT_SPL 876 imply ARCH_EARLY_INIT_R 877 imply CMD_CLK 878 imply CMD_DM 879 imply CMD_SPL 880 imply FAT_WRITE 881 882config ARCH_ZYNQMP_R5 883 bool "Xilinx ZynqMP R5 based platform" 884 select CLK 885 select CPU_V7R 886 select DM 887 select DM_SERIAL 888 select OF_CONTROL 889 imply CMD_DM 890 891config ARCH_ZYNQMP 892 bool "Xilinx ZynqMP based platform" 893 select ARM64 894 select BOARD_LATE_INIT 895 select CLK 896 select DM 897 select DM_SERIAL 898 select DM_USB if USB 899 select OF_CONTROL 900 select SPL_BOARD_INIT if SPL 901 select SPL_CLK if SPL 902 select SUPPORT_SPL 903 imply CMD_DM 904 imply FAT_WRITE 905 906config TEGRA 907 bool "NVIDIA Tegra" 908 imply DISTRO_DEFAULTS 909 imply FAT_WRITE 910 911config TARGET_VEXPRESS64_AEMV8A 912 bool "Support vexpress_aemv8a" 913 select ARM64 914 select PL01X_SERIAL 915 916config TARGET_VEXPRESS64_BASE_FVP 917 bool "Support Versatile Express ARMv8a FVP BASE model" 918 select ARM64 919 select PL01X_SERIAL 920 select SEMIHOSTING 921 922config TARGET_VEXPRESS64_BASE_FVP_DRAM 923 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 924 select ARM64 925 select PL01X_SERIAL 926 help 927 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 928 the default config to allow the user to load the images directly into 929 DRAM using model parameters rather than by using semi-hosting to load 930 the files from the host filesystem. 931 932config TARGET_VEXPRESS64_JUNO 933 bool "Support Versatile Express Juno Development Platform" 934 select ARM64 935 select PL01X_SERIAL 936 937config TARGET_LS2080A_EMU 938 bool "Support ls2080a_emu" 939 select ARCH_LS2080A 940 select ARCH_MISC_INIT 941 select ARM64 942 select ARMV8_MULTIENTRY 943 help 944 Support for Freescale LS2080A_EMU platform 945 The LS2080A Development System (EMULATOR) is a pre silicon 946 development platform that supports the QorIQ LS2080A 947 Layerscape Architecture processor. 948 949config TARGET_LS2080A_SIMU 950 bool "Support ls2080a_simu" 951 select ARCH_LS2080A 952 select ARCH_MISC_INIT 953 select ARM64 954 select ARMV8_MULTIENTRY 955 help 956 Support for Freescale LS2080A_SIMU platform 957 The LS2080A Development System (QDS) is a pre silicon 958 development platform that supports the QorIQ LS2080A 959 Layerscape Architecture processor. 960 961config TARGET_LS1088AQDS 962 bool "Support ls1088aqds" 963 select ARCH_LS1088A 964 select ARCH_MISC_INIT 965 select ARM64 966 select ARMV8_MULTIENTRY 967 select BOARD_LATE_INIT 968 select SUPPORT_SPL 969 help 970 Support for NXP LS1088AQDS platform 971 The LS1088A Development System (QDS) is a high-performance 972 development platform that supports the QorIQ LS1088A 973 Layerscape Architecture processor. 974 975config TARGET_LS2080AQDS 976 bool "Support ls2080aqds" 977 select ARCH_LS2080A 978 select ARCH_MISC_INIT 979 select ARM64 980 select ARMV8_MULTIENTRY 981 select BOARD_LATE_INIT 982 select SUPPORT_SPL 983 imply SCSI 984 imply SCSI_AHCI 985 help 986 Support for Freescale LS2080AQDS platform 987 The LS2080A Development System (QDS) is a high-performance 988 development platform that supports the QorIQ LS2080A 989 Layerscape Architecture processor. 990 991config TARGET_LS2080ARDB 992 bool "Support ls2080ardb" 993 select ARCH_LS2080A 994 select ARCH_MISC_INIT 995 select ARM64 996 select ARMV8_MULTIENTRY 997 select BOARD_LATE_INIT 998 select SUPPORT_SPL 999 imply SCSI 1000 imply SCSI_AHCI 1001 help 1002 Support for Freescale LS2080ARDB platform. 1003 The LS2080A Reference design board (RDB) is a high-performance 1004 development platform that supports the QorIQ LS2080A 1005 Layerscape Architecture processor. 1006 1007config TARGET_LS2081ARDB 1008 bool "Support ls2081ardb" 1009 select ARCH_LS2080A 1010 select ARCH_MISC_INIT 1011 select ARM64 1012 select ARMV8_MULTIENTRY 1013 select BOARD_LATE_INIT 1014 select SUPPORT_SPL 1015 help 1016 Support for Freescale LS2081ARDB platform. 1017 The LS2081A Reference design board (RDB) is a high-performance 1018 development platform that supports the QorIQ LS2081A/LS2041A 1019 Layerscape Architecture processor. 1020 1021config TARGET_HIKEY 1022 bool "Support HiKey 96boards Consumer Edition Platform" 1023 select ARM64 1024 select DM 1025 select DM_GPIO 1026 select DM_SERIAL 1027 select OF_CONTROL 1028 select PL01X_SERIAL 1029 select SPECIFY_CONSOLE_INDEX 1030 imply CMD_DM 1031 help 1032 Support for HiKey 96boards platform. It features a HI6220 1033 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1034 1035config TARGET_POPLAR 1036 bool "Support Poplar 96boards Enterprise Edition Platform" 1037 select ARM64 1038 select DM 1039 select DM_SERIAL 1040 select DM_USB 1041 select OF_CONTROL 1042 select PL01X_SERIAL 1043 imply CMD_DM 1044 help 1045 Support for Poplar 96boards EE platform. It features a HI3798cv200 1046 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1047 making it capable of running any commercial set-top solution based on 1048 Linux or Android. 1049 1050config TARGET_LS1012AQDS 1051 bool "Support ls1012aqds" 1052 select ARCH_LS1012A 1053 select ARM64 1054 select BOARD_LATE_INIT 1055 help 1056 Support for Freescale LS1012AQDS platform. 1057 The LS1012A Development System (QDS) is a high-performance 1058 development platform that supports the QorIQ LS1012A 1059 Layerscape Architecture processor. 1060 1061config TARGET_LS1012ARDB 1062 bool "Support ls1012ardb" 1063 select ARCH_LS1012A 1064 select ARM64 1065 select BOARD_LATE_INIT 1066 imply SCSI 1067 imply SCSI_AHCI 1068 help 1069 Support for Freescale LS1012ARDB platform. 1070 The LS1012A Reference design board (RDB) is a high-performance 1071 development platform that supports the QorIQ LS1012A 1072 Layerscape Architecture processor. 1073 1074config TARGET_LS1012A2G5RDB 1075 bool "Support ls1012a2g5rdb" 1076 select ARCH_LS1012A 1077 select ARM64 1078 select BOARD_LATE_INIT 1079 imply SCSI 1080 help 1081 Support for Freescale LS1012A2G5RDB platform. 1082 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1083 development platform that supports the QorIQ LS1012A 1084 Layerscape Architecture processor. 1085 1086config TARGET_LS1012AFRWY 1087 bool "Support ls1012afrwy" 1088 select ARCH_LS1012A 1089 select ARM64 1090 select BOARD_LATE_INIT 1091 imply SCSI 1092 imply SCSI_AHCI 1093 help 1094 Support for Freescale LS1012AFRWY platform. 1095 The LS1012A FRWY board (FRWY) is a high-performance 1096 development platform that supports the QorIQ LS1012A 1097 Layerscape Architecture processor. 1098 1099config TARGET_LS1012AFRDM 1100 bool "Support ls1012afrdm" 1101 select ARCH_LS1012A 1102 select ARM64 1103 help 1104 Support for Freescale LS1012AFRDM platform. 1105 The LS1012A Freedom board (FRDM) is a high-performance 1106 development platform that supports the QorIQ LS1012A 1107 Layerscape Architecture processor. 1108 1109config TARGET_LS1088ARDB 1110 bool "Support ls1088ardb" 1111 select ARCH_LS1088A 1112 select ARCH_MISC_INIT 1113 select ARM64 1114 select ARMV8_MULTIENTRY 1115 select BOARD_LATE_INIT 1116 select SUPPORT_SPL 1117 help 1118 Support for NXP LS1088ARDB platform. 1119 The LS1088A Reference design board (RDB) is a high-performance 1120 development platform that supports the QorIQ LS1088A 1121 Layerscape Architecture processor. 1122 1123config TARGET_LS1021AQDS 1124 bool "Support ls1021aqds" 1125 select ARCH_LS1021A 1126 select ARCH_SUPPORT_PSCI 1127 select BOARD_EARLY_INIT_F 1128 select BOARD_LATE_INIT 1129 select CPU_V7A 1130 select CPU_V7_HAS_NONSEC 1131 select CPU_V7_HAS_VIRT 1132 select LS1_DEEP_SLEEP 1133 select SUPPORT_SPL 1134 select SYS_FSL_DDR 1135 imply SCSI 1136 1137config TARGET_LS1021ATWR 1138 bool "Support ls1021atwr" 1139 select ARCH_LS1021A 1140 select ARCH_SUPPORT_PSCI 1141 select BOARD_EARLY_INIT_F 1142 select BOARD_LATE_INIT 1143 select CPU_V7A 1144 select CPU_V7_HAS_NONSEC 1145 select CPU_V7_HAS_VIRT 1146 select LS1_DEEP_SLEEP 1147 select SUPPORT_SPL 1148 imply SCSI 1149 1150config TARGET_LS1021AIOT 1151 bool "Support ls1021aiot" 1152 select ARCH_LS1021A 1153 select ARCH_SUPPORT_PSCI 1154 select BOARD_LATE_INIT 1155 select CPU_V7A 1156 select CPU_V7_HAS_NONSEC 1157 select CPU_V7_HAS_VIRT 1158 select SUPPORT_SPL 1159 imply SCSI 1160 help 1161 Support for Freescale LS1021AIOT platform. 1162 The LS1021A Freescale board (IOT) is a high-performance 1163 development platform that supports the QorIQ LS1021A 1164 Layerscape Architecture processor. 1165 1166config TARGET_LS1043AQDS 1167 bool "Support ls1043aqds" 1168 select ARCH_LS1043A 1169 select ARM64 1170 select ARMV8_MULTIENTRY 1171 select BOARD_EARLY_INIT_F 1172 select BOARD_LATE_INIT 1173 select SUPPORT_SPL 1174 imply SCSI 1175 help 1176 Support for Freescale LS1043AQDS platform. 1177 1178config TARGET_LS1043ARDB 1179 bool "Support ls1043ardb" 1180 select ARCH_LS1043A 1181 select ARM64 1182 select ARMV8_MULTIENTRY 1183 select BOARD_EARLY_INIT_F 1184 select BOARD_LATE_INIT 1185 select SUPPORT_SPL 1186 imply SCSI 1187 help 1188 Support for Freescale LS1043ARDB platform. 1189 1190config TARGET_LS1046AQDS 1191 bool "Support ls1046aqds" 1192 select ARCH_LS1046A 1193 select ARM64 1194 select ARMV8_MULTIENTRY 1195 select BOARD_EARLY_INIT_F 1196 select BOARD_LATE_INIT 1197 select DM_SPI_FLASH if DM_SPI 1198 select SUPPORT_SPL 1199 imply SCSI 1200 help 1201 Support for Freescale LS1046AQDS platform. 1202 The LS1046A Development System (QDS) is a high-performance 1203 development platform that supports the QorIQ LS1046A 1204 Layerscape Architecture processor. 1205 1206config TARGET_LS1046ARDB 1207 bool "Support ls1046ardb" 1208 select ARCH_LS1046A 1209 select ARM64 1210 select ARMV8_MULTIENTRY 1211 select BOARD_EARLY_INIT_F 1212 select BOARD_LATE_INIT 1213 select DM_SPI_FLASH if DM_SPI 1214 select POWER_MC34VR500 1215 select SUPPORT_SPL 1216 imply SCSI 1217 help 1218 Support for Freescale LS1046ARDB platform. 1219 The LS1046A Reference Design Board (RDB) is a high-performance 1220 development platform that supports the QorIQ LS1046A 1221 Layerscape Architecture processor. 1222 1223config TARGET_H2200 1224 bool "Support h2200" 1225 select CPU_PXA 1226 1227config TARGET_ZIPITZ2 1228 bool "Support zipitz2" 1229 select CPU_PXA 1230 1231config TARGET_COLIBRI_PXA270 1232 bool "Support colibri_pxa270" 1233 select CPU_PXA 1234 1235config ARCH_UNIPHIER 1236 bool "Socionext UniPhier SoCs" 1237 select BOARD_LATE_INIT 1238 select DM 1239 select DM_GPIO 1240 select DM_I2C 1241 select DM_MMC 1242 select DM_RESET 1243 select DM_SERIAL 1244 select DM_USB 1245 select OF_BOARD_SETUP 1246 select OF_CONTROL 1247 select OF_LIBFDT 1248 select PINCTRL 1249 select SPL_BOARD_INIT if SPL 1250 select SPL_DM if SPL 1251 select SPL_LIBCOMMON_SUPPORT if SPL 1252 select SPL_LIBGENERIC_SUPPORT if SPL 1253 select SPL_OF_CONTROL if SPL 1254 select SPL_PINCTRL if SPL 1255 select SUPPORT_SPL 1256 imply CMD_DM 1257 imply DISTRO_DEFAULTS 1258 imply FAT_WRITE 1259 help 1260 Support for UniPhier SoC family developed by Socionext Inc. 1261 (formerly, System LSI Business Division of Panasonic Corporation) 1262 1263config STM32 1264 bool "Support STMicroelectronics STM32 MCU with cortex M" 1265 select CPU_V7M 1266 select DM 1267 select DM_SERIAL 1268 select SYS_THUMB_BUILD 1269 imply CMD_DM 1270 1271config ARCH_STI 1272 bool "Support STMicrolectronics SoCs" 1273 select BLK 1274 select CPU_V7A 1275 select DM 1276 select DM_MMC 1277 select DM_RESET 1278 select DM_SERIAL 1279 imply CMD_DM 1280 help 1281 Support for STMicroelectronics STiH407/10 SoC family. 1282 This SoC is used on Linaro 96Board STiH410-B2260 1283 1284config ARCH_STM32MP 1285 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1286 select ARCH_MISC_INIT 1287 select BOARD_LATE_INIT 1288 select CLK 1289 select DM 1290 select DM_GPIO 1291 select DM_RESET 1292 select DM_SERIAL 1293 select MISC 1294 select OF_CONTROL 1295 select OF_LIBFDT 1296 select PINCTRL 1297 select REGMAP 1298 select SUPPORT_SPL 1299 select SYSCON 1300 select SYSRESET 1301 select SYS_THUMB_BUILD 1302 imply CMD_DM 1303 help 1304 Support for STM32MP SoC family developed by STMicroelectronics, 1305 MPUs based on ARM cortex A core 1306 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1307 BootLoader (FSBL) 1308 1309config ARCH_ROCKCHIP 1310 bool "Support Rockchip SoCs" 1311 select BLK 1312 select DM 1313 select DM_GPIO 1314 select DM_I2C 1315 select DM_MMC 1316 select DM_PWM 1317 select DM_REGULATOR 1318 select DM_SERIAL 1319 select DM_SPI 1320 select DM_SPI_FLASH 1321 select DM_USB if USB 1322 select ENABLE_ARM_SOC_BOOT0_HOOK 1323 select OF_CONTROL 1324 select SPI 1325 select SPL_DM if SPL 1326 select SPL_SYS_MALLOC_SIMPLE if SPL 1327 select SYS_MALLOC_F 1328 select SYS_THUMB_BUILD if !ARM64 1329 imply ADC 1330 imply CMD_DM 1331 imply DISTRO_DEFAULTS 1332 imply FAT_WRITE 1333 imply SARADC_ROCKCHIP 1334 imply SPL_SYSRESET 1335 imply SYS_NS16550 1336 imply TPL_SYSRESET 1337 imply USB_FUNCTION_FASTBOOT 1338 1339config TARGET_THUNDERX_88XX 1340 bool "Support ThunderX 88xx" 1341 select ARM64 1342 select OF_CONTROL 1343 select PL01X_SERIAL 1344 select SYS_CACHE_SHIFT_7 1345 1346config ARCH_ASPEED 1347 bool "Support Aspeed SoCs" 1348 select DM 1349 select OF_CONTROL 1350 imply CMD_DM 1351 1352endchoice 1353 1354config TI_SECURE_DEVICE 1355 bool "HS Device Type Support" 1356 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1357 help 1358 If a high secure (HS) device type is being used, this config 1359 must be set. This option impacts various aspects of the 1360 build system (to create signed boot images that can be 1361 authenticated) and the code. See the doc/README.ti-secure 1362 file for further details. 1363 1364source "arch/arm/mach-aspeed/Kconfig" 1365 1366source "arch/arm/mach-at91/Kconfig" 1367 1368source "arch/arm/mach-bcm283x/Kconfig" 1369 1370source "arch/arm/mach-bcmstb/Kconfig" 1371 1372source "arch/arm/mach-davinci/Kconfig" 1373 1374source "arch/arm/mach-exynos/Kconfig" 1375 1376source "arch/arm/mach-highbank/Kconfig" 1377 1378source "arch/arm/mach-integrator/Kconfig" 1379 1380source "arch/arm/mach-keystone/Kconfig" 1381 1382source "arch/arm/mach-kirkwood/Kconfig" 1383 1384source "arch/arm/mach-mvebu/Kconfig" 1385 1386source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1387 1388source "arch/arm/mach-imx/mx2/Kconfig" 1389 1390source "arch/arm/mach-imx/mx3/Kconfig" 1391 1392source "arch/arm/mach-imx/mx5/Kconfig" 1393 1394source "arch/arm/mach-imx/mx6/Kconfig" 1395 1396source "arch/arm/mach-imx/mx7/Kconfig" 1397 1398source "arch/arm/mach-imx/mx7ulp/Kconfig" 1399 1400source "arch/arm/mach-imx/mx8m/Kconfig" 1401 1402source "arch/arm/mach-imx/mxs/Kconfig" 1403 1404source "arch/arm/mach-omap2/Kconfig" 1405 1406source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1407 1408source "arch/arm/mach-orion5x/Kconfig" 1409 1410source "arch/arm/mach-owl/Kconfig" 1411 1412source "arch/arm/mach-rmobile/Kconfig" 1413 1414source "arch/arm/mach-meson/Kconfig" 1415 1416source "arch/arm/mach-qemu/Kconfig" 1417 1418source "arch/arm/mach-rockchip/Kconfig" 1419 1420source "arch/arm/mach-s5pc1xx/Kconfig" 1421 1422source "arch/arm/mach-snapdragon/Kconfig" 1423 1424source "arch/arm/mach-socfpga/Kconfig" 1425 1426source "arch/arm/mach-sti/Kconfig" 1427 1428source "arch/arm/mach-stm32/Kconfig" 1429 1430source "arch/arm/mach-stm32mp/Kconfig" 1431 1432source "arch/arm/mach-sunxi/Kconfig" 1433 1434source "arch/arm/mach-tegra/Kconfig" 1435 1436source "arch/arm/mach-uniphier/Kconfig" 1437 1438source "arch/arm/cpu/armv7/vf610/Kconfig" 1439 1440source "arch/arm/mach-zynq/Kconfig" 1441 1442source "arch/arm/mach-zynqmp-r5/Kconfig" 1443 1444source "arch/arm/cpu/armv7/Kconfig" 1445 1446source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1447 1448source "arch/arm/cpu/armv8/Kconfig" 1449 1450source "arch/arm/mach-imx/Kconfig" 1451 1452source "board/bosch/shc/Kconfig" 1453source "board/CarMediaLab/flea3/Kconfig" 1454source "board/Marvell/aspenite/Kconfig" 1455source "board/Marvell/gplugd/Kconfig" 1456source "board/armadeus/apf27/Kconfig" 1457source "board/armltd/vexpress/Kconfig" 1458source "board/armltd/vexpress64/Kconfig" 1459source "board/broadcom/bcm23550_w1d/Kconfig" 1460source "board/broadcom/bcm28155_ap/Kconfig" 1461source "board/broadcom/bcmcygnus/Kconfig" 1462source "board/broadcom/bcmnsp/Kconfig" 1463source "board/broadcom/bcmns2/Kconfig" 1464source "board/cavium/thunderx/Kconfig" 1465source "board/cirrus/edb93xx/Kconfig" 1466source "board/eets/pdu001/Kconfig" 1467source "board/freescale/ls2080a/Kconfig" 1468source "board/freescale/ls2080aqds/Kconfig" 1469source "board/freescale/ls2080ardb/Kconfig" 1470source "board/freescale/ls1088a/Kconfig" 1471source "board/freescale/ls1021aqds/Kconfig" 1472source "board/freescale/ls1043aqds/Kconfig" 1473source "board/freescale/ls1021atwr/Kconfig" 1474source "board/freescale/ls1021aiot/Kconfig" 1475source "board/freescale/ls1046aqds/Kconfig" 1476source "board/freescale/ls1043ardb/Kconfig" 1477source "board/freescale/ls1046ardb/Kconfig" 1478source "board/freescale/ls1012aqds/Kconfig" 1479source "board/freescale/ls1012ardb/Kconfig" 1480source "board/freescale/ls1012afrdm/Kconfig" 1481source "board/freescale/mx35pdk/Kconfig" 1482source "board/freescale/s32v234evb/Kconfig" 1483source "board/gdsys/a38x/Kconfig" 1484source "board/grinn/chiliboard/Kconfig" 1485source "board/gumstix/pepper/Kconfig" 1486source "board/h2200/Kconfig" 1487source "board/hisilicon/hikey/Kconfig" 1488source "board/hisilicon/poplar/Kconfig" 1489source "board/isee/igep003x/Kconfig" 1490source "board/phytec/pcm051/Kconfig" 1491source "board/silica/pengwyn/Kconfig" 1492source "board/spear/spear300/Kconfig" 1493source "board/spear/spear310/Kconfig" 1494source "board/spear/spear320/Kconfig" 1495source "board/spear/spear600/Kconfig" 1496source "board/spear/x600/Kconfig" 1497source "board/st/stv0991/Kconfig" 1498source "board/tcl/sl50/Kconfig" 1499source "board/ucRobotics/bubblegum_96/Kconfig" 1500source "board/birdland/bav335x/Kconfig" 1501source "board/timll/devkit3250/Kconfig" 1502source "board/toradex/colibri_pxa270/Kconfig" 1503source "board/vscom/baltos/Kconfig" 1504source "board/woodburn/Kconfig" 1505source "board/work-microwave/work_92105/Kconfig" 1506source "board/xilinx/Kconfig" 1507source "board/xilinx/zynq/Kconfig" 1508source "board/xilinx/zynqmp/Kconfig" 1509source "board/zipitz2/Kconfig" 1510 1511source "arch/arm/Kconfig.debug" 1512 1513endmenu 1514 1515config SPL_LDSCRIPT 1516 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1517 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1518 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1519 1520 1521