1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12config DMA_ADDR_T_64BIT 13 bool 14 default y if ARM64 15 16config HAS_VBAR 17 bool 18 19config HAS_THUMB2 20 bool 21 22# Used for compatibility with asm files copied from the kernel 23config ARM_ASM_UNIFIED 24 bool 25 default y 26 27# Used for compatibility with asm files copied from the kernel 28config THUMB2_KERNEL 29 bool 30 31# If set, the workarounds for these ARM errata are applied early during U-Boot 32# startup. Note that in general these options force the workarounds to be 33# applied; no CPU-type/version detection exists, unlike the similar options in 34# the Linux kernel. Do not set these options unless they apply! Also note that 35# the following can be machine specific errata. These do have ability to 36# provide rudimentary version and machine specific checks, but expect no 37# product checks: 38# CONFIG_ARM_ERRATA_430973 39# CONFIG_ARM_ERRATA_454179 40# CONFIG_ARM_ERRATA_621766 41# CONFIG_ARM_ERRATA_798870 42# CONFIG_ARM_ERRATA_801819 43config ARM_ERRATA_430973 44 bool 45 46config ARM_ERRATA_454179 47 bool 48 49config ARM_ERRATA_621766 50 bool 51 52config ARM_ERRATA_716044 53 bool 54 55config ARM_ERRATA_725233 56 bool 57 58config ARM_ERRATA_742230 59 bool 60 61config ARM_ERRATA_743622 62 bool 63 64config ARM_ERRATA_751472 65 bool 66 67config ARM_ERRATA_761320 68 bool 69 70config ARM_ERRATA_773022 71 bool 72 73config ARM_ERRATA_774769 74 bool 75 76config ARM_ERRATA_794072 77 bool 78 79config ARM_ERRATA_798870 80 bool 81 82config ARM_ERRATA_801819 83 bool 84 85config ARM_ERRATA_826974 86 bool 87 88config ARM_ERRATA_828024 89 bool 90 91config ARM_ERRATA_829520 92 bool 93 94config ARM_ERRATA_833069 95 bool 96 97config ARM_ERRATA_833471 98 bool 99 100config ARM_ERRATA_845369 101 bool 102 103config ARM_ERRATA_852421 104 bool 105 106config ARM_ERRATA_852423 107 bool 108 109config CPU_ARM720T 110 bool 111 select SYS_CACHE_SHIFT_5 112 113config CPU_ARM920T 114 bool 115 select SYS_CACHE_SHIFT_5 116 117config CPU_ARM926EJS 118 bool 119 select SYS_CACHE_SHIFT_5 120 121config CPU_ARM946ES 122 bool 123 select SYS_CACHE_SHIFT_5 124 125config CPU_ARM1136 126 bool 127 select SYS_CACHE_SHIFT_5 128 129config CPU_ARM1176 130 bool 131 select HAS_VBAR 132 select SYS_CACHE_SHIFT_5 133 134config CPU_V7 135 bool 136 select HAS_VBAR 137 select HAS_THUMB2 138 select SYS_CACHE_SHIFT_6 139 140config CPU_V7M 141 bool 142 select HAS_THUMB2 143 select THUMB2_KERNEL 144 select SYS_CACHE_SHIFT_5 145 146config CPU_PXA 147 bool 148 select SYS_CACHE_SHIFT_5 149 150config CPU_SA1100 151 bool 152 select SYS_CACHE_SHIFT_5 153 154config SYS_CPU 155 default "arm720t" if CPU_ARM720T 156 default "arm920t" if CPU_ARM920T 157 default "arm926ejs" if CPU_ARM926EJS 158 default "arm946es" if CPU_ARM946ES 159 default "arm1136" if CPU_ARM1136 160 default "arm1176" if CPU_ARM1176 161 default "armv7" if CPU_V7 162 default "armv7m" if CPU_V7M 163 default "pxa" if CPU_PXA 164 default "sa1100" if CPU_SA1100 165 default "armv8" if ARM64 166 167config SYS_ARM_ARCH 168 int 169 default 4 if CPU_ARM720T 170 default 4 if CPU_ARM920T 171 default 5 if CPU_ARM926EJS 172 default 5 if CPU_ARM946ES 173 default 6 if CPU_ARM1136 174 default 6 if CPU_ARM1176 175 default 7 if CPU_V7 176 default 7 if CPU_V7M 177 default 5 if CPU_PXA 178 default 4 if CPU_SA1100 179 default 8 if ARM64 180 181config SYS_CACHE_SHIFT_5 182 bool 183 184config SYS_CACHE_SHIFT_6 185 bool 186 187config SYS_CACHE_SHIFT_7 188 bool 189 190config SYS_CACHELINE_SIZE 191 int 192 default 128 if SYS_CACHE_SHIFT_7 193 default 64 if SYS_CACHE_SHIFT_6 194 default 32 if SYS_CACHE_SHIFT_5 195 196config ARM_SMCCC 197 bool "Support for ARM SMC Calling Convention (SMCCC)" 198 depends on CPU_V7 || ARM64 199 select ARM_PSCI_FW 200 help 201 Say Y here if you want to enable ARM SMC Calling Convention. 202 This should be enabled if U-Boot needs to communicate with system 203 firmware (for example, PSCI) according to SMCCC. 204 205config SEMIHOSTING 206 bool "support boot from semihosting" 207 help 208 In emulated environments, semihosting is a way for 209 the hosted environment to call out to the emulator to 210 retrieve files from the host machine. 211 212config SYS_THUMB_BUILD 213 bool "Build U-Boot using the Thumb instruction set" 214 depends on !ARM64 215 help 216 Use this flag to build U-Boot using the Thumb instruction set for 217 ARM architectures. Thumb instruction set provides better code 218 density. For ARM architectures that support Thumb2 this flag will 219 result in Thumb2 code generated by GCC. 220 221config SPL_SYS_THUMB_BUILD 222 bool "Build SPL using the Thumb instruction set" 223 default y if SYS_THUMB_BUILD 224 depends on !ARM64 225 help 226 Use this flag to build SPL using the Thumb instruction set for 227 ARM architectures. Thumb instruction set provides better code 228 density. For ARM architectures that support Thumb2 this flag will 229 result in Thumb2 code generated by GCC. 230 231config SYS_L2CACHE_OFF 232 bool "L2cache off" 233 help 234 If SoC does not support L2CACHE or one do not want to enable 235 L2CACHE, choose this option. 236 237config ENABLE_ARM_SOC_BOOT0_HOOK 238 bool "prepare BOOT0 header" 239 help 240 If the SoC's BOOT0 requires a header area filled with (magic) 241 values, then choose this option, and create a define called 242 ARM_SOC_BOOT0_HOOK which contains the required assembler 243 preprocessor code. 244 245config ARM_CORTEX_CPU_IS_UP 246 bool 247 default n 248 249config USE_ARCH_MEMCPY 250 bool "Use an assembly optimized implementation of memcpy" 251 default y 252 depends on !ARM64 253 help 254 Enable the generation of an optimized version of memcpy. 255 Such implementation may be faster under some conditions 256 but may increase the binary size. 257 258config SPL_USE_ARCH_MEMCPY 259 bool "Use an assembly optimized implementation of memcpy for SPL" 260 default y if USE_ARCH_MEMCPY 261 depends on !ARM64 262 help 263 Enable the generation of an optimized version of memcpy. 264 Such implementation may be faster under some conditions 265 but may increase the binary size. 266 267config USE_ARCH_MEMSET 268 bool "Use an assembly optimized implementation of memset" 269 default y 270 depends on !ARM64 271 help 272 Enable the generation of an optimized version of memset. 273 Such implementation may be faster under some conditions 274 but may increase the binary size. 275 276config SPL_USE_ARCH_MEMSET 277 bool "Use an assembly optimized implementation of memset for SPL" 278 default y if USE_ARCH_MEMSET 279 depends on !ARM64 280 help 281 Enable the generation of an optimized version of memset. 282 Such implementation may be faster under some conditions 283 but may increase the binary size. 284 285config ARM64_SUPPORT_AARCH32 286 bool "ARM64 system support AArch32 execution state" 287 default y if ARM64 && !TARGET_THUNDERX_88XX 288 help 289 This ARM64 system supports AArch32 execution state. 290 291choice 292 prompt "Target select" 293 default TARGET_HIKEY 294 295config ARCH_AT91 296 bool "Atmel AT91" 297 select SPL_BOARD_INIT if SPL 298 299config TARGET_EDB93XX 300 bool "Support edb93xx" 301 select CPU_ARM920T 302 303config TARGET_ASPENITE 304 bool "Support aspenite" 305 select CPU_ARM926EJS 306 307config TARGET_GPLUGD 308 bool "Support gplugd" 309 select CPU_ARM926EJS 310 311config ARCH_DAVINCI 312 bool "TI DaVinci" 313 select CPU_ARM926EJS 314 imply CMD_SAVES 315 help 316 Support for TI's DaVinci platform. 317 318config KIRKWOOD 319 bool "Marvell Kirkwood" 320 select CPU_ARM926EJS 321 select BOARD_EARLY_INIT_F 322 select ARCH_MISC_INIT 323 324config ARCH_MVEBU 325 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 326 select OF_CONTROL 327 select OF_SEPARATE 328 select DM 329 select DM_ETH 330 select DM_SERIAL 331 select DM_SPI 332 select DM_SPI_FLASH 333 334config TARGET_DEVKIT3250 335 bool "Support devkit3250" 336 select CPU_ARM926EJS 337 select SUPPORT_SPL 338 339config TARGET_WORK_92105 340 bool "Support work_92105" 341 select CPU_ARM926EJS 342 select SUPPORT_SPL 343 344config TARGET_APF27 345 bool "Support apf27" 346 select CPU_ARM926EJS 347 select SUPPORT_SPL 348 349config TARGET_APX4DEVKIT 350 bool "Support apx4devkit" 351 select CPU_ARM926EJS 352 select SUPPORT_SPL 353 354config TARGET_XFI3 355 bool "Support xfi3" 356 select CPU_ARM926EJS 357 select SUPPORT_SPL 358 359config TARGET_M28EVK 360 bool "Support m28evk" 361 select CPU_ARM926EJS 362 select SUPPORT_SPL 363 364config TARGET_MX23EVK 365 bool "Support mx23evk" 366 select CPU_ARM926EJS 367 select SUPPORT_SPL 368 select BOARD_EARLY_INIT_F 369 370config TARGET_MX28EVK 371 bool "Support mx28evk" 372 select CPU_ARM926EJS 373 select SUPPORT_SPL 374 select BOARD_EARLY_INIT_F 375 376config TARGET_MX23_OLINUXINO 377 bool "Support mx23_olinuxino" 378 select CPU_ARM926EJS 379 select SUPPORT_SPL 380 select BOARD_EARLY_INIT_F 381 382config TARGET_BG0900 383 bool "Support bg0900" 384 select CPU_ARM926EJS 385 select SUPPORT_SPL 386 387config TARGET_SANSA_FUZE_PLUS 388 bool "Support sansa_fuze_plus" 389 select CPU_ARM926EJS 390 select SUPPORT_SPL 391 392config TARGET_SC_SPS_1 393 bool "Support sc_sps_1" 394 select CPU_ARM926EJS 395 select SUPPORT_SPL 396 397config ORION5X 398 bool "Marvell Orion" 399 select CPU_ARM926EJS 400 401config TARGET_SPEAR300 402 bool "Support spear300" 403 select CPU_ARM926EJS 404 select BOARD_EARLY_INIT_F 405 imply CMD_SAVES 406 407config TARGET_SPEAR310 408 bool "Support spear310" 409 select CPU_ARM926EJS 410 select BOARD_EARLY_INIT_F 411 imply CMD_SAVES 412 413config TARGET_SPEAR320 414 bool "Support spear320" 415 select CPU_ARM926EJS 416 select BOARD_EARLY_INIT_F 417 imply CMD_SAVES 418 419config TARGET_SPEAR600 420 bool "Support spear600" 421 select CPU_ARM926EJS 422 select BOARD_EARLY_INIT_F 423 imply CMD_SAVES 424 425config TARGET_STV0991 426 bool "Support stv0991" 427 select CPU_V7 428 select DM 429 select DM_SERIAL 430 select DM_SPI 431 select DM_SPI_FLASH 432 select SPI_FLASH 433 434config TARGET_X600 435 bool "Support x600" 436 select BOARD_LATE_INIT 437 select CPU_ARM926EJS 438 select SUPPORT_SPL 439 440config TARGET_IMX31_PHYCORE 441 bool "Support imx31_phycore_eet" 442 select CPU_ARM1136 443 select BOARD_EARLY_INIT_F 444 445config TARGET_IMX31_PHYCORE_EET 446 bool "Support imx31_phycore_eet" 447 select BOARD_LATE_INIT 448 select CPU_ARM1136 449 select BOARD_EARLY_INIT_F 450 451config TARGET_MX31ADS 452 bool "Support mx31ads" 453 select CPU_ARM1136 454 select BOARD_EARLY_INIT_F 455 456config TARGET_MX31PDK 457 bool "Support mx31pdk" 458 select BOARD_LATE_INIT 459 select CPU_ARM1136 460 select SUPPORT_SPL 461 select BOARD_EARLY_INIT_F 462 463config TARGET_WOODBURN 464 bool "Support woodburn" 465 select CPU_ARM1136 466 467config TARGET_WOODBURN_SD 468 bool "Support woodburn_sd" 469 select CPU_ARM1136 470 select SUPPORT_SPL 471 472config TARGET_FLEA3 473 bool "Support flea3" 474 select CPU_ARM1136 475 476config TARGET_MX35PDK 477 bool "Support mx35pdk" 478 select BOARD_LATE_INIT 479 select CPU_ARM1136 480 481config ARCH_BCM283X 482 bool "Broadcom BCM283X family" 483 select DM 484 select DM_SERIAL 485 select DM_GPIO 486 select OF_CONTROL 487 imply FAT_WRITE 488 489config TARGET_VEXPRESS_CA15_TC2 490 bool "Support vexpress_ca15_tc2" 491 select CPU_V7 492 select CPU_V7_HAS_NONSEC 493 select CPU_V7_HAS_VIRT 494 495config TARGET_VEXPRESS_CA5X2 496 bool "Support vexpress_ca5x2" 497 select CPU_V7 498 499config TARGET_VEXPRESS_CA9X4 500 bool "Support vexpress_ca9x4" 501 select CPU_V7 502 503config TARGET_BCM23550_W1D 504 bool "Support bcm23550_w1d" 505 select CPU_V7 506 imply CRC32_VERIFY 507 imply FAT_WRITE 508 509config TARGET_BCM28155_AP 510 bool "Support bcm28155_ap" 511 select CPU_V7 512 imply CRC32_VERIFY 513 imply FAT_WRITE 514 515config TARGET_BCMCYGNUS 516 bool "Support bcmcygnus" 517 select CPU_V7 518 imply CRC32_VERIFY 519 imply CMD_HASH 520 imply FAT_WRITE 521 imply HASH_VERIFY 522 imply NETDEVICES 523 imply BCM_SF2_ETH 524 imply BCM_SF2_ETH_GMAC 525 526config TARGET_BCMNSP 527 bool "Support bcmnsp" 528 select CPU_V7 529 530config TARGET_BCMNS2 531 bool "Support Broadcom Northstar2" 532 select ARM64 533 help 534 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 535 ARMv8 Cortex-A57 processors targeting a broad range of networking 536 applications 537 538config ARCH_EXYNOS 539 bool "Samsung EXYNOS" 540 select DM 541 select DM_I2C 542 select DM_SPI_FLASH 543 select DM_SERIAL 544 select DM_SPI 545 select DM_GPIO 546 select DM_KEYBOARD 547 imply FAT_WRITE 548 549config ARCH_S5PC1XX 550 bool "Samsung S5PC1XX" 551 select CPU_V7 552 select DM 553 select DM_SERIAL 554 select DM_GPIO 555 select DM_I2C 556 557config ARCH_HIGHBANK 558 bool "Calxeda Highbank" 559 select CPU_V7 560 561config ARCH_INTEGRATOR 562 bool "ARM Ltd. Integrator family" 563 select DM 564 select DM_SERIAL 565 566config ARCH_KEYSTONE 567 bool "TI Keystone" 568 select CPU_V7 569 select SUPPORT_SPL 570 select SYS_THUMB_BUILD 571 select CMD_POWEROFF 572 imply CMD_MTDPARTS 573 imply FIT 574 imply CMD_SAVES 575 576config ARCH_OMAP2PLUS 577 bool "TI OMAP2+" 578 select CPU_V7 579 select SPL_BOARD_INIT if SPL 580 select SPL_STACK_R if SPL 581 select SUPPORT_SPL 582 imply FIT 583 584config ARCH_MESON 585 bool "Amlogic Meson" 586 help 587 Support for the Meson SoC family developed by Amlogic Inc., 588 targeted at media players and tablet computers. We currently 589 support the S905 (GXBaby) 64-bit SoC. 590 591config ARCH_MX25 592 bool "NXP MX25" 593 select CPU_ARM926EJS 594 595config ARCH_MX7ULP 596 bool "NXP MX7ULP" 597 select CPU_V7 598 select ROM_UNIFIED_SECTIONS 599 600config ARCH_MX7 601 bool "Freescale MX7" 602 select CPU_V7 603 select SYS_FSL_HAS_SEC if SECURE_BOOT 604 select SYS_FSL_SEC_COMPAT_4 605 select SYS_FSL_SEC_LE 606 select BOARD_EARLY_INIT_F 607 select ARCH_MISC_INIT 608 609config ARCH_MX6 610 bool "Freescale MX6" 611 select CPU_V7 612 select SYS_FSL_HAS_SEC if SECURE_BOOT 613 select SYS_FSL_SEC_COMPAT_4 614 select SYS_FSL_SEC_LE 615 select SYS_THUMB_BUILD if SPL 616 617if ARCH_MX6 618config SPL_LDSCRIPT 619 default "arch/arm/mach-omap2/u-boot-spl.lds" 620endif 621 622config ARCH_MX5 623 bool "Freescale MX5" 624 select CPU_V7 625 select BOARD_EARLY_INIT_F 626 627config ARCH_QEMU 628 bool "QEMU Virtual Platform" 629 select CPU_V7 630 select ARCH_SUPPORT_PSCI 631 select DM 632 select DM_SERIAL 633 select OF_CONTROL 634 635config ARCH_RMOBILE 636 bool "Renesas ARM SoCs" 637 select DM 638 select DM_SERIAL 639 select BOARD_EARLY_INIT_F 640 imply FAT_WRITE 641 imply SYS_THUMB_BUILD 642 643config TARGET_S32V234EVB 644 bool "Support s32v234evb" 645 select ARM64 646 select SYS_FSL_ERRATUM_ESDHC111 647 648config ARCH_SNAPDRAGON 649 bool "Qualcomm Snapdragon SoCs" 650 select ARM64 651 select DM 652 select DM_GPIO 653 select DM_SERIAL 654 select SPMI 655 select OF_CONTROL 656 select OF_SEPARATE 657 658config ARCH_SOCFPGA 659 bool "Altera SOCFPGA family" 660 select CPU_V7 661 select SUPPORT_SPL 662 select OF_CONTROL 663 select SPL_OF_CONTROL 664 select DM 665 select DM_SPI_FLASH 666 select DM_SPI 667 select ENABLE_ARM_SOC_BOOT0_HOOK 668 select ARCH_EARLY_INIT_R 669 select ARCH_MISC_INIT 670 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 671 select SYS_THUMB_BUILD 672 imply CMD_MTDPARTS 673 imply CRC32_VERIFY 674 imply FAT_WRITE 675 676config ARCH_SUNXI 677 bool "Support sunxi (Allwinner) SoCs" 678 select CMD_GPIO 679 select CMD_MMC if MMC 680 select CMD_USB if DISTRO_DEFAULTS 681 select DM 682 select DM_ETH 683 select DM_GPIO 684 select DM_KEYBOARD 685 select DM_SERIAL 686 select DM_USB if DISTRO_DEFAULTS 687 select OF_BOARD_SETUP 688 select OF_CONTROL 689 select OF_SEPARATE 690 select SPL_STACK_R if SPL 691 select SPL_SYS_MALLOC_SIMPLE if SPL 692 select SYS_NS16550 693 select SPL_SYS_THUMB_BUILD if !ARM64 694 select SYS_THUMB_BUILD if !ARM64 695 select USB if DISTRO_DEFAULTS 696 select USB_STORAGE if DISTRO_DEFAULTS 697 select USB_KEYBOARD if DISTRO_DEFAULTS 698 select USE_TINY_PRINTF 699 imply CMD_GPT 700 imply FAT_WRITE 701 imply PRE_CONSOLE_BUFFER 702 imply SPL_GPIO_SUPPORT 703 imply SPL_LIBCOMMON_SUPPORT 704 imply SPL_LIBDISK_SUPPORT 705 imply SPL_LIBGENERIC_SUPPORT 706 imply SPL_MMC_SUPPORT if MMC 707 imply SPL_POWER_SUPPORT 708 imply SPL_SERIAL_SUPPORT 709 imply USB_GADGET 710 711config TARGET_TS4600 712 bool "Support TS4600" 713 select CPU_ARM926EJS 714 select SUPPORT_SPL 715 716config ARCH_VF610 717 bool "Freescale Vybrid" 718 select CPU_V7 719 select SYS_FSL_ERRATUM_ESDHC111 720 imply CMD_MTDPARTS 721 imply NAND 722 723config ARCH_ZYNQ 724 bool "Xilinx Zynq Platform" 725 select BOARD_LATE_INIT 726 select CPU_V7 727 select SUPPORT_SPL 728 select OF_CONTROL 729 select SPL_BOARD_INIT if SPL 730 select SPL_OF_CONTROL if SPL 731 select DM 732 select DM_ETH 733 select DM_GPIO 734 select SPL_DM if SPL 735 select DM_MMC 736 select DM_SPI 737 select DM_SERIAL 738 select DM_SPI_FLASH 739 select SPL_SEPARATE_BSS if SPL 740 select DM_USB if USB 741 select BLK 742 select CLK 743 select SPL_CLK 744 select CLK_ZYNQ 745 imply CMD_CLK 746 imply FAT_WRITE 747 imply CMD_SPL 748 749config ARCH_ZYNQMP 750 bool "Support Xilinx ZynqMP Platform" 751 select ARM64 752 select BOARD_LATE_INIT 753 select DM 754 select OF_CONTROL 755 select DM_SERIAL 756 select SUPPORT_SPL 757 select CLK 758 select SPL_BOARD_INIT if SPL 759 select SPL_CLK 760 select DM_USB if USB 761 imply FAT_WRITE 762 763config TEGRA 764 bool "NVIDIA Tegra" 765 imply FAT_WRITE 766 767config TARGET_VEXPRESS64_AEMV8A 768 bool "Support vexpress_aemv8a" 769 select ARM64 770 771config TARGET_VEXPRESS64_BASE_FVP 772 bool "Support Versatile Express ARMv8a FVP BASE model" 773 select ARM64 774 select SEMIHOSTING 775 776config TARGET_VEXPRESS64_BASE_FVP_DRAM 777 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 778 select ARM64 779 help 780 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 781 the default config to allow the user to load the images directly into 782 DRAM using model parameters rather than by using semi-hosting to load 783 the files from the host filesystem. 784 785config TARGET_VEXPRESS64_JUNO 786 bool "Support Versatile Express Juno Development Platform" 787 select ARM64 788 789config TARGET_LS2080A_EMU 790 bool "Support ls2080a_emu" 791 select ARCH_LS2080A 792 select ARM64 793 select ARMV8_MULTIENTRY 794 select ARCH_MISC_INIT 795 help 796 Support for Freescale LS2080A_EMU platform 797 The LS2080A Development System (EMULATOR) is a pre silicon 798 development platform that supports the QorIQ LS2080A 799 Layerscape Architecture processor. 800 801config TARGET_LS2080A_SIMU 802 bool "Support ls2080a_simu" 803 select ARCH_LS2080A 804 select ARM64 805 select ARMV8_MULTIENTRY 806 select ARCH_MISC_INIT 807 help 808 Support for Freescale LS2080A_SIMU platform 809 The LS2080A Development System (QDS) is a pre silicon 810 development platform that supports the QorIQ LS2080A 811 Layerscape Architecture processor. 812 813config TARGET_LS1088AQDS 814 bool "Support ls1088aqds" 815 select ARCH_LS1088A 816 select ARM64 817 select ARMV8_MULTIENTRY 818 select ARCH_MISC_INIT 819 select BOARD_LATE_INIT 820 help 821 Support for NXP LS1088AQDS platform 822 The LS1088A Development System (QDS) is a high-performance 823 development platform that supports the QorIQ LS1088A 824 Layerscape Architecture processor. 825 826config TARGET_LS2080AQDS 827 bool "Support ls2080aqds" 828 select ARCH_LS2080A 829 select ARM64 830 select ARMV8_MULTIENTRY 831 select BOARD_LATE_INIT 832 select SUPPORT_SPL 833 select ARCH_MISC_INIT 834 imply SCSI 835 help 836 Support for Freescale LS2080AQDS platform 837 The LS2080A Development System (QDS) is a high-performance 838 development platform that supports the QorIQ LS2080A 839 Layerscape Architecture processor. 840 841config TARGET_LS2080ARDB 842 bool "Support ls2080ardb" 843 select ARCH_LS2080A 844 select ARM64 845 select ARMV8_MULTIENTRY 846 select BOARD_LATE_INIT 847 select SUPPORT_SPL 848 select ARCH_MISC_INIT 849 imply SCSI 850 help 851 Support for Freescale LS2080ARDB platform. 852 The LS2080A Reference design board (RDB) is a high-performance 853 development platform that supports the QorIQ LS2080A 854 Layerscape Architecture processor. 855 856config TARGET_LS2081ARDB 857 bool "Support ls2081ardb" 858 select ARCH_LS2080A 859 select ARM64 860 select ARMV8_MULTIENTRY 861 select BOARD_LATE_INIT 862 select SUPPORT_SPL 863 select ARCH_MISC_INIT 864 help 865 Support for Freescale LS2081ARDB platform. 866 The LS2081A Reference design board (RDB) is a high-performance 867 development platform that supports the QorIQ LS2081A/LS2041A 868 Layerscape Architecture processor. 869 870config TARGET_HIKEY 871 bool "Support HiKey 96boards Consumer Edition Platform" 872 select ARM64 873 select DM 874 select DM_GPIO 875 select DM_SERIAL 876 select OF_CONTROL 877 help 878 Support for HiKey 96boards platform. It features a HI6220 879 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 880 881config TARGET_POPLAR 882 bool "Support Poplar 96boards Enterprise Edition Platform" 883 select ARM64 884 select DM 885 select OF_CONTROL 886 select DM_SERIAL 887 select DM_USB 888 help 889 Support for Poplar 96boards EE platform. It features a HI3798cv200 890 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 891 making it capable of running any commercial set-top solution based on 892 Linux or Android. 893 894config TARGET_LS1012AQDS 895 bool "Support ls1012aqds" 896 select ARCH_LS1012A 897 select ARM64 898 select BOARD_LATE_INIT 899 help 900 Support for Freescale LS1012AQDS platform. 901 The LS1012A Development System (QDS) is a high-performance 902 development platform that supports the QorIQ LS1012A 903 Layerscape Architecture processor. 904 905config TARGET_LS1012ARDB 906 bool "Support ls1012ardb" 907 select ARCH_LS1012A 908 select ARM64 909 select BOARD_LATE_INIT 910 imply SCSI 911 help 912 Support for Freescale LS1012ARDB platform. 913 The LS1012A Reference design board (RDB) is a high-performance 914 development platform that supports the QorIQ LS1012A 915 Layerscape Architecture processor. 916 917config TARGET_LS1012AFRDM 918 bool "Support ls1012afrdm" 919 select ARCH_LS1012A 920 select ARM64 921 help 922 Support for Freescale LS1012AFRDM platform. 923 The LS1012A Freedom board (FRDM) is a high-performance 924 development platform that supports the QorIQ LS1012A 925 Layerscape Architecture processor. 926 927config TARGET_LS1088ARDB 928 bool "Support ls1088ardb" 929 select ARCH_LS1088A 930 select ARM64 931 select ARMV8_MULTIENTRY 932 select ARCH_MISC_INIT 933 select BOARD_LATE_INIT 934 help 935 Support for NXP LS1088ARDB platform. 936 The LS1088A Reference design board (RDB) is a high-performance 937 development platform that supports the QorIQ LS1088A 938 Layerscape Architecture processor. 939 940config TARGET_LS1021AQDS 941 bool "Support ls1021aqds" 942 select BOARD_LATE_INIT 943 select CPU_V7 944 select CPU_V7_HAS_NONSEC 945 select CPU_V7_HAS_VIRT 946 select SUPPORT_SPL 947 select ARCH_LS1021A 948 select ARCH_SUPPORT_PSCI 949 select LS1_DEEP_SLEEP 950 select SYS_FSL_DDR 951 select BOARD_EARLY_INIT_F 952 imply SCSI 953 954config TARGET_LS1021ATWR 955 bool "Support ls1021atwr" 956 select BOARD_LATE_INIT 957 select CPU_V7 958 select CPU_V7_HAS_NONSEC 959 select CPU_V7_HAS_VIRT 960 select SUPPORT_SPL 961 select ARCH_LS1021A 962 select ARCH_SUPPORT_PSCI 963 select LS1_DEEP_SLEEP 964 select BOARD_EARLY_INIT_F 965 imply SCSI 966 967config TARGET_LS1021AIOT 968 bool "Support ls1021aiot" 969 select BOARD_LATE_INIT 970 select CPU_V7 971 select CPU_V7_HAS_NONSEC 972 select CPU_V7_HAS_VIRT 973 select SUPPORT_SPL 974 select ARCH_LS1021A 975 select ARCH_SUPPORT_PSCI 976 imply SCSI 977 help 978 Support for Freescale LS1021AIOT platform. 979 The LS1021A Freescale board (IOT) is a high-performance 980 development platform that supports the QorIQ LS1021A 981 Layerscape Architecture processor. 982 983config TARGET_LS1043AQDS 984 bool "Support ls1043aqds" 985 select ARCH_LS1043A 986 select ARM64 987 select ARMV8_MULTIENTRY 988 select BOARD_LATE_INIT 989 select SUPPORT_SPL 990 select BOARD_EARLY_INIT_F 991 imply SCSI 992 help 993 Support for Freescale LS1043AQDS platform. 994 995config TARGET_LS1043ARDB 996 bool "Support ls1043ardb" 997 select ARCH_LS1043A 998 select ARM64 999 select ARMV8_MULTIENTRY 1000 select BOARD_LATE_INIT 1001 select SUPPORT_SPL 1002 select BOARD_EARLY_INIT_F 1003 imply SCSI 1004 help 1005 Support for Freescale LS1043ARDB platform. 1006 1007config TARGET_LS1046AQDS 1008 bool "Support ls1046aqds" 1009 select ARCH_LS1046A 1010 select ARM64 1011 select ARMV8_MULTIENTRY 1012 select BOARD_LATE_INIT 1013 select SUPPORT_SPL 1014 select DM_SPI_FLASH if DM_SPI 1015 select BOARD_EARLY_INIT_F 1016 imply SCSI 1017 help 1018 Support for Freescale LS1046AQDS platform. 1019 The LS1046A Development System (QDS) is a high-performance 1020 development platform that supports the QorIQ LS1046A 1021 Layerscape Architecture processor. 1022 1023config TARGET_LS1046ARDB 1024 bool "Support ls1046ardb" 1025 select ARCH_LS1046A 1026 select ARM64 1027 select ARMV8_MULTIENTRY 1028 select BOARD_LATE_INIT 1029 select SUPPORT_SPL 1030 select DM_SPI_FLASH if DM_SPI 1031 select POWER_MC34VR500 1032 select BOARD_EARLY_INIT_F 1033 imply SCSI 1034 help 1035 Support for Freescale LS1046ARDB platform. 1036 The LS1046A Reference Design Board (RDB) is a high-performance 1037 development platform that supports the QorIQ LS1046A 1038 Layerscape Architecture processor. 1039 1040config TARGET_H2200 1041 bool "Support h2200" 1042 select CPU_PXA 1043 1044config TARGET_ZIPITZ2 1045 bool "Support zipitz2" 1046 select CPU_PXA 1047 1048config TARGET_COLIBRI_PXA270 1049 bool "Support colibri_pxa270" 1050 select CPU_PXA 1051 1052config ARCH_UNIPHIER 1053 bool "Socionext UniPhier SoCs" 1054 select BOARD_LATE_INIT 1055 select DM 1056 select DM_GPIO 1057 select DM_I2C 1058 select DM_MMC 1059 select DM_RESET 1060 select DM_SERIAL 1061 select DM_USB 1062 select OF_CONTROL 1063 select OF_LIBFDT 1064 select PINCTRL 1065 select SPL_BOARD_INIT if SPL 1066 select SPL_DM if SPL 1067 select SPL_LIBCOMMON_SUPPORT if SPL 1068 select SPL_LIBGENERIC_SUPPORT if SPL 1069 select SPL_OF_CONTROL if SPL 1070 select SPL_PINCTRL if SPL 1071 select SUPPORT_SPL 1072 imply FAT_WRITE 1073 help 1074 Support for UniPhier SoC family developed by Socionext Inc. 1075 (formerly, System LSI Business Division of Panasonic Corporation) 1076 1077config STM32 1078 bool "Support STM32" 1079 select CPU_V7M 1080 select DM 1081 select DM_SERIAL 1082 select SYS_THUMB_BUILD 1083 1084config ARCH_STI 1085 bool "Support STMicrolectronics SoCs" 1086 select CPU_V7 1087 select DM 1088 select DM_SERIAL 1089 select BLK 1090 select DM_MMC 1091 select DM_RESET 1092 help 1093 Support for STMicroelectronics STiH407/10 SoC family. 1094 This SoC is used on Linaro 96Board STiH410-B2260 1095 1096config ARCH_ROCKCHIP 1097 bool "Support Rockchip SoCs" 1098 select OF_CONTROL 1099 select BLK 1100 select DM 1101 select SPL_DM if SPL 1102 select SYS_MALLOC_F 1103 select SYS_THUMB_BUILD if !ARM64 1104 select SPL_SYS_MALLOC_SIMPLE if SPL 1105 select DM_GPIO 1106 select DM_I2C 1107 select DM_MMC 1108 select DM_SERIAL 1109 select DM_SPI 1110 select DM_SPI_FLASH 1111 select DM_USB if USB 1112 select DM_PWM 1113 select DM_REGULATOR 1114 imply CMD_FASTBOOT 1115 imply FASTBOOT 1116 imply FAT_WRITE 1117 imply USB_FUNCTION_FASTBOOT 1118 imply SPL_SYSRESET 1119 imply TPL_SYSRESET 1120 imply ADC 1121 imply SARADC_ROCKCHIP 1122 1123config TARGET_THUNDERX_88XX 1124 bool "Support ThunderX 88xx" 1125 select ARM64 1126 select OF_CONTROL 1127 select SYS_CACHE_SHIFT_7 1128 1129config ARCH_ASPEED 1130 bool "Support Aspeed SoCs" 1131 select OF_CONTROL 1132 select DM 1133 1134endchoice 1135 1136source "arch/arm/mach-aspeed/Kconfig" 1137 1138source "arch/arm/mach-at91/Kconfig" 1139 1140source "arch/arm/mach-bcm283x/Kconfig" 1141 1142source "arch/arm/mach-davinci/Kconfig" 1143 1144source "arch/arm/mach-exynos/Kconfig" 1145 1146source "arch/arm/mach-highbank/Kconfig" 1147 1148source "arch/arm/mach-integrator/Kconfig" 1149 1150source "arch/arm/mach-keystone/Kconfig" 1151 1152source "arch/arm/mach-kirkwood/Kconfig" 1153 1154source "arch/arm/mach-mvebu/Kconfig" 1155 1156source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1157 1158source "arch/arm/mach-imx/mx2/Kconfig" 1159 1160source "arch/arm/mach-imx/mx7ulp/Kconfig" 1161 1162source "arch/arm/mach-imx/mx7/Kconfig" 1163 1164source "arch/arm/mach-imx/mx6/Kconfig" 1165 1166source "arch/arm/mach-imx/mx5/Kconfig" 1167 1168source "arch/arm/mach-omap2/Kconfig" 1169 1170source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1171 1172source "arch/arm/mach-orion5x/Kconfig" 1173 1174source "arch/arm/mach-rmobile/Kconfig" 1175 1176source "arch/arm/mach-meson/Kconfig" 1177 1178source "arch/arm/mach-qemu/Kconfig" 1179 1180source "arch/arm/mach-rockchip/Kconfig" 1181 1182source "arch/arm/mach-s5pc1xx/Kconfig" 1183 1184source "arch/arm/mach-snapdragon/Kconfig" 1185 1186source "arch/arm/mach-socfpga/Kconfig" 1187 1188source "arch/arm/mach-sti/Kconfig" 1189 1190source "arch/arm/mach-stm32/Kconfig" 1191 1192source "arch/arm/mach-sunxi/Kconfig" 1193 1194source "arch/arm/mach-tegra/Kconfig" 1195 1196source "arch/arm/mach-uniphier/Kconfig" 1197 1198source "arch/arm/cpu/armv7/vf610/Kconfig" 1199 1200source "arch/arm/mach-zynq/Kconfig" 1201 1202source "arch/arm/cpu/armv7/Kconfig" 1203 1204source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1205 1206source "arch/arm/cpu/armv8/Kconfig" 1207 1208source "arch/arm/mach-imx/Kconfig" 1209 1210source "board/aries/m28evk/Kconfig" 1211source "board/bosch/shc/Kconfig" 1212source "board/CarMediaLab/flea3/Kconfig" 1213source "board/Marvell/aspenite/Kconfig" 1214source "board/Marvell/gplugd/Kconfig" 1215source "board/armadeus/apf27/Kconfig" 1216source "board/armltd/vexpress/Kconfig" 1217source "board/armltd/vexpress64/Kconfig" 1218source "board/bluegiga/apx4devkit/Kconfig" 1219source "board/broadcom/bcm23550_w1d/Kconfig" 1220source "board/broadcom/bcm28155_ap/Kconfig" 1221source "board/broadcom/bcmcygnus/Kconfig" 1222source "board/broadcom/bcmnsp/Kconfig" 1223source "board/broadcom/bcmns2/Kconfig" 1224source "board/cavium/thunderx/Kconfig" 1225source "board/cirrus/edb93xx/Kconfig" 1226source "board/creative/xfi3/Kconfig" 1227source "board/freescale/ls2080a/Kconfig" 1228source "board/freescale/ls2080aqds/Kconfig" 1229source "board/freescale/ls2080ardb/Kconfig" 1230source "board/freescale/ls1088a/Kconfig" 1231source "board/freescale/ls1021aqds/Kconfig" 1232source "board/freescale/ls1043aqds/Kconfig" 1233source "board/freescale/ls1021atwr/Kconfig" 1234source "board/freescale/ls1021aiot/Kconfig" 1235source "board/freescale/ls1046aqds/Kconfig" 1236source "board/freescale/ls1043ardb/Kconfig" 1237source "board/freescale/ls1046ardb/Kconfig" 1238source "board/freescale/ls1012aqds/Kconfig" 1239source "board/freescale/ls1012ardb/Kconfig" 1240source "board/freescale/ls1012afrdm/Kconfig" 1241source "board/freescale/mx23evk/Kconfig" 1242source "board/freescale/mx28evk/Kconfig" 1243source "board/freescale/mx31ads/Kconfig" 1244source "board/freescale/mx31pdk/Kconfig" 1245source "board/freescale/mx35pdk/Kconfig" 1246source "board/freescale/s32v234evb/Kconfig" 1247source "board/gdsys/a38x/Kconfig" 1248source "board/grinn/chiliboard/Kconfig" 1249source "board/gumstix/pepper/Kconfig" 1250source "board/h2200/Kconfig" 1251source "board/hisilicon/hikey/Kconfig" 1252source "board/hisilicon/poplar/Kconfig" 1253source "board/imx31_phycore/Kconfig" 1254source "board/isee/igep003x/Kconfig" 1255source "board/olimex/mx23_olinuxino/Kconfig" 1256source "board/phytec/pcm051/Kconfig" 1257source "board/ppcag/bg0900/Kconfig" 1258source "board/sandisk/sansa_fuze_plus/Kconfig" 1259source "board/schulercontrol/sc_sps_1/Kconfig" 1260source "board/silica/pengwyn/Kconfig" 1261source "board/spear/spear300/Kconfig" 1262source "board/spear/spear310/Kconfig" 1263source "board/spear/spear320/Kconfig" 1264source "board/spear/spear600/Kconfig" 1265source "board/spear/x600/Kconfig" 1266source "board/st/stv0991/Kconfig" 1267source "board/tcl/sl50/Kconfig" 1268source "board/birdland/bav335x/Kconfig" 1269source "board/timll/devkit3250/Kconfig" 1270source "board/toradex/colibri_pxa270/Kconfig" 1271source "board/technologic/ts4600/Kconfig" 1272source "board/vscom/baltos/Kconfig" 1273source "board/woodburn/Kconfig" 1274source "board/work-microwave/work_92105/Kconfig" 1275source "board/zipitz2/Kconfig" 1276 1277source "arch/arm/Kconfig.debug" 1278 1279endmenu 1280 1281config SPL_LDSCRIPT 1282 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3 1283 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1284 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1285 1286 1287