1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_THUMB2 223 select HAS_VBAR 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select SYS_ARM_MPU 231 select SYS_CACHE_SHIFT_5 232 select SYS_THUMB_BUILD 233 select THUMB2_KERNEL 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_ARM_CACHE_CP15 239 select SYS_ARM_MPU 240 select SYS_CACHE_SHIFT_6 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select ARCH_MISC_INIT 431 select BOARD_EARLY_INIT_F 432 select CPU_ARM926EJS 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select DM 437 select DM_ETH 438 select DM_SERIAL 439 select DM_SPI 440 select DM_SPI_FLASH 441 select OF_CONTROL 442 select OF_SEPARATE 443 select SPI 444 imply CMD_DM 445 446config TARGET_APF27 447 bool "Support apf27" 448 select CPU_ARM926EJS 449 select SUPPORT_SPL 450 451config ORION5X 452 bool "Marvell Orion" 453 select CPU_ARM926EJS 454 455config TARGET_SPEAR300 456 bool "Support spear300" 457 select BOARD_EARLY_INIT_F 458 select CPU_ARM926EJS 459 select PL011_SERIAL 460 imply CMD_SAVES 461 462config TARGET_SPEAR310 463 bool "Support spear310" 464 select BOARD_EARLY_INIT_F 465 select CPU_ARM926EJS 466 select PL011_SERIAL 467 imply CMD_SAVES 468 469config TARGET_SPEAR320 470 bool "Support spear320" 471 select BOARD_EARLY_INIT_F 472 select CPU_ARM926EJS 473 select PL011_SERIAL 474 imply CMD_SAVES 475 476config TARGET_SPEAR600 477 bool "Support spear600" 478 select BOARD_EARLY_INIT_F 479 select CPU_ARM926EJS 480 select PL011_SERIAL 481 imply CMD_SAVES 482 483config TARGET_STV0991 484 bool "Support stv0991" 485 select CPU_V7A 486 select DM 487 select DM_SERIAL 488 select DM_SPI 489 select DM_SPI_FLASH 490 select PL01X_SERIAL 491 select SPI 492 select SPI_FLASH 493 imply CMD_DM 494 495config TARGET_X600 496 bool "Support x600" 497 select BOARD_LATE_INIT 498 select CPU_ARM926EJS 499 select PL011_SERIAL 500 select SUPPORT_SPL 501 502config TARGET_WOODBURN 503 bool "Support woodburn" 504 select CPU_ARM1136 505 506config TARGET_WOODBURN_SD 507 bool "Support woodburn_sd" 508 select CPU_ARM1136 509 select SUPPORT_SPL 510 511config TARGET_FLEA3 512 bool "Support flea3" 513 select CPU_ARM1136 514 515config TARGET_MX35PDK 516 bool "Support mx35pdk" 517 select BOARD_LATE_INIT 518 select CPU_ARM1136 519 520config ARCH_BCM283X 521 bool "Broadcom BCM283X family" 522 select DM 523 select DM_GPIO 524 select DM_SERIAL 525 select OF_CONTROL 526 select PL01X_SERIAL 527 select SERIAL_SEARCH_ALL 528 imply CMD_DM 529 imply FAT_WRITE 530 531config ARCH_BCM6858 532 bool "Broadcom BCM6858 family" 533 select DM 534 select OF_CONTROL 535 imply CMD_DM 536 537config TARGET_VEXPRESS_CA15_TC2 538 bool "Support vexpress_ca15_tc2" 539 select CPU_V7A 540 select CPU_V7_HAS_NONSEC 541 select CPU_V7_HAS_VIRT 542 select PL011_SERIAL 543 544config ARCH_BCMSTB 545 bool "Broadcom BCM7XXX family" 546 select CPU_V7A 547 select DM 548 select OF_CONTROL 549 select OF_PRIOR_STAGE 550 imply CMD_DM 551 help 552 This enables support for Broadcom ARM-based set-top box 553 chipsets, including the 7445 family of chips. 554 555config TARGET_VEXPRESS_CA5X2 556 bool "Support vexpress_ca5x2" 557 select CPU_V7A 558 select PL011_SERIAL 559 560config TARGET_VEXPRESS_CA9X4 561 bool "Support vexpress_ca9x4" 562 select CPU_V7A 563 select PL011_SERIAL 564 565config TARGET_BCM23550_W1D 566 bool "Support bcm23550_w1d" 567 select CPU_V7A 568 imply CRC32_VERIFY 569 imply FAT_WRITE 570 571config TARGET_BCM28155_AP 572 bool "Support bcm28155_ap" 573 select CPU_V7A 574 imply CRC32_VERIFY 575 imply FAT_WRITE 576 577config TARGET_BCMCYGNUS 578 bool "Support bcmcygnus" 579 select CPU_V7A 580 imply BCM_SF2_ETH 581 imply BCM_SF2_ETH_GMAC 582 imply CMD_HASH 583 imply CRC32_VERIFY 584 imply FAT_WRITE 585 imply HASH_VERIFY 586 imply NETDEVICES 587 588config TARGET_BCMNSP 589 bool "Support bcmnsp" 590 select CPU_V7A 591 592config TARGET_BCMNS2 593 bool "Support Broadcom Northstar2" 594 select ARM64 595 help 596 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 597 ARMv8 Cortex-A57 processors targeting a broad range of networking 598 applications 599 600config ARCH_EXYNOS 601 bool "Samsung EXYNOS" 602 select DM 603 select DM_GPIO 604 select DM_I2C 605 select DM_KEYBOARD 606 select DM_SERIAL 607 select DM_SPI 608 select DM_SPI_FLASH 609 select SPI 610 imply CMD_DM 611 imply FAT_WRITE 612 613config ARCH_S5PC1XX 614 bool "Samsung S5PC1XX" 615 select CPU_V7A 616 select DM 617 select DM_GPIO 618 select DM_I2C 619 select DM_SERIAL 620 imply CMD_DM 621 622config ARCH_HIGHBANK 623 bool "Calxeda Highbank" 624 select CPU_V7A 625 select PL011_SERIAL 626 627config ARCH_INTEGRATOR 628 bool "ARM Ltd. Integrator family" 629 select DM 630 select DM_SERIAL 631 select PL01X_SERIAL 632 imply CMD_DM 633 634config ARCH_KEYSTONE 635 bool "TI Keystone" 636 select CMD_POWEROFF 637 select CPU_V7A 638 select SUPPORT_SPL 639 select SYS_ARCH_TIMER 640 select SYS_THUMB_BUILD 641 imply CMD_MTDPARTS 642 imply CMD_SAVES 643 imply FIT 644 645config ARCH_K3 646 bool "Texas Instruments' K3 Architecture" 647 select SPL 648 select SUPPORT_SPL 649 select FIT 650 651config ARCH_OMAP2PLUS 652 bool "TI OMAP2+" 653 select CPU_V7A 654 select SPL_BOARD_INIT if SPL 655 select SPL_STACK_R if SPL 656 select SUPPORT_SPL 657 imply FIT 658 659config ARCH_MESON 660 bool "Amlogic Meson" 661 imply DISTRO_DEFAULTS 662 help 663 Support for the Meson SoC family developed by Amlogic Inc., 664 targeted at media players and tablet computers. We currently 665 support the S905 (GXBaby) 64-bit SoC. 666 667config ARCH_LPC32XX 668 bool "NXP LPC32xx platform" 669 select CPU_ARM926EJS 670 select DM 671 select DM_GPIO 672 select DM_SERIAL 673 select SPL_DM if SPL 674 select SUPPORT_SPL 675 imply CMD_DM 676 677config ARCH_IMX8 678 bool "NXP i.MX8 platform" 679 select ARM64 680 select DM 681 select OF_CONTROL 682 683config ARCH_MX8M 684 bool "NXP i.MX8M platform" 685 select ARM64 686 select DM 687 select SUPPORT_SPL 688 imply CMD_DM 689 690config ARCH_MX23 691 bool "NXP i.MX23 family" 692 select CPU_ARM926EJS 693 select PL011_SERIAL 694 select SUPPORT_SPL 695 696config ARCH_MX25 697 bool "NXP MX25" 698 select CPU_ARM926EJS 699 imply MXC_GPIO 700 701config ARCH_MX28 702 bool "NXP i.MX28 family" 703 select CPU_ARM926EJS 704 select PL011_SERIAL 705 select SUPPORT_SPL 706 707config ARCH_MX31 708 bool "NXP i.MX31 family" 709 select CPU_ARM1136 710 711config ARCH_MX7ULP 712 bool "NXP MX7ULP" 713 select CPU_V7A 714 select ROM_UNIFIED_SECTIONS 715 imply MXC_GPIO 716 717config ARCH_MX7 718 bool "Freescale MX7" 719 select ARCH_MISC_INIT 720 select BOARD_EARLY_INIT_F 721 select CPU_V7A 722 select SYS_FSL_HAS_SEC if SECURE_BOOT 723 select SYS_FSL_SEC_COMPAT_4 724 select SYS_FSL_SEC_LE 725 imply MXC_GPIO 726 727config ARCH_MX6 728 bool "Freescale MX6" 729 select CPU_V7A 730 select SYS_FSL_HAS_SEC if SECURE_BOOT 731 select SYS_FSL_SEC_COMPAT_4 732 select SYS_FSL_SEC_LE 733 select SYS_THUMB_BUILD if SPL 734 imply MXC_GPIO 735 736if ARCH_MX6 737config SPL_LDSCRIPT 738 default "arch/arm/mach-omap2/u-boot-spl.lds" 739endif 740 741config ARCH_MX5 742 bool "Freescale MX5" 743 select BOARD_EARLY_INIT_F 744 select CPU_V7A 745 imply MXC_GPIO 746 747config ARCH_OWL 748 bool "Actions Semi OWL SoCs" 749 select ARM64 750 select DM 751 select DM_SERIAL 752 select OF_CONTROL 753 imply CMD_DM 754 755config ARCH_QEMU 756 bool "QEMU Virtual Platform" 757 select DM 758 select DM_SERIAL 759 select OF_CONTROL 760 select PL01X_SERIAL 761 imply CMD_DM 762 imply DM_RTC 763 imply RTC_PL031 764 765config ARCH_RMOBILE 766 bool "Renesas ARM SoCs" 767 select BOARD_EARLY_INIT_F 768 select DM 769 select DM_SERIAL 770 imply CMD_DM 771 imply FAT_WRITE 772 imply SYS_THUMB_BUILD 773 774config TARGET_S32V234EVB 775 bool "Support s32v234evb" 776 select ARM64 777 select SYS_FSL_ERRATUM_ESDHC111 778 779config ARCH_SNAPDRAGON 780 bool "Qualcomm Snapdragon SoCs" 781 select ARM64 782 select DM 783 select DM_GPIO 784 select DM_SERIAL 785 select MSM_SMEM 786 select OF_CONTROL 787 select OF_SEPARATE 788 select SMEM 789 select SPMI 790 imply CMD_DM 791 792config ARCH_SOCFPGA 793 bool "Altera SOCFPGA family" 794 select ARCH_EARLY_INIT_R 795 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10 796 select ARM64 if TARGET_SOCFPGA_STRATIX10 797 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 798 select DM 799 select DM_SERIAL 800 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 801 select OF_CONTROL 802 select SPL_DM_RESET if DM_RESET 803 select SPL_DM_SERIAL 804 select SPL_LIBCOMMON_SUPPORT 805 select SPL_LIBDISK_SUPPORT 806 select SPL_LIBGENERIC_SUPPORT 807 select SPL_MMC_SUPPORT if DM_MMC 808 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 809 select SPL_OF_CONTROL 810 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 811 select SPL_SERIAL_SUPPORT 812 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 813 select SPL_SPI_SUPPORT if DM_SPI 814 select SPL_WATCHDOG_SUPPORT 815 select SUPPORT_SPL 816 select SYS_NS16550 817 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10 818 imply CMD_DM 819 imply CMD_MTDPARTS 820 imply CRC32_VERIFY 821 imply DM_SPI 822 imply DM_SPI_FLASH 823 imply FAT_WRITE 824 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 825 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 826 827config ARCH_SUNXI 828 bool "Support sunxi (Allwinner) SoCs" 829 select BINMAN 830 select CMD_GPIO 831 select CMD_MMC if MMC 832 select CMD_USB if DISTRO_DEFAULTS 833 select DM 834 select DM_ETH 835 select DM_GPIO 836 select DM_KEYBOARD 837 select DM_SERIAL 838 select DM_USB if DISTRO_DEFAULTS 839 select OF_BOARD_SETUP 840 select OF_CONTROL 841 select OF_SEPARATE 842 select SPECIFY_CONSOLE_INDEX 843 select SPL_STACK_R if SPL 844 select SPL_SYS_MALLOC_SIMPLE if SPL 845 select SPL_SYS_THUMB_BUILD if !ARM64 846 select SYS_NS16550 847 select SYS_THUMB_BUILD if !ARM64 848 select USB if DISTRO_DEFAULTS 849 select USB_KEYBOARD if DISTRO_DEFAULTS 850 select USB_STORAGE if DISTRO_DEFAULTS 851 select USE_TINY_PRINTF 852 imply CMD_DM 853 imply CMD_GPT 854 imply CMD_UBI if NAND 855 imply DISTRO_DEFAULTS 856 imply FAT_WRITE 857 imply FIT 858 imply OF_LIBFDT_OVERLAY 859 imply PRE_CONSOLE_BUFFER 860 imply SPL_GPIO_SUPPORT 861 imply SPL_LIBCOMMON_SUPPORT 862 imply SPL_LIBDISK_SUPPORT 863 imply SPL_LIBGENERIC_SUPPORT 864 imply SPL_MMC_SUPPORT if MMC 865 imply SPL_POWER_SUPPORT 866 imply SPL_SERIAL_SUPPORT 867 imply USB_GADGET 868 869config ARCH_VERSAL 870 bool "Support Xilinx Versal Platform" 871 select ARM64 872 select CLK 873 select DM 874 select DM_SERIAL 875 select OF_CONTROL 876 877config ARCH_VF610 878 bool "Freescale Vybrid" 879 select CPU_V7A 880 select SYS_FSL_ERRATUM_ESDHC111 881 imply CMD_MTDPARTS 882 imply NAND 883 884config ARCH_ZYNQ 885 bool "Xilinx Zynq based platform" 886 select BOARD_EARLY_INIT_F if WDT 887 select CLK 888 select CLK_ZYNQ 889 select CPU_V7A 890 select DM 891 select DM_ETH if NET 892 select DM_MMC if MMC 893 select DM_SERIAL 894 select DM_SPI 895 select DM_SPI_FLASH 896 select DM_USB if USB 897 select OF_CONTROL 898 select SPI 899 select SPL_BOARD_INIT if SPL 900 select SPL_CLK if SPL 901 select SPL_DM if SPL 902 select SPL_OF_CONTROL if SPL 903 select SPL_SEPARATE_BSS if SPL 904 select SUPPORT_SPL 905 imply ARCH_EARLY_INIT_R 906 imply BOARD_LATE_INIT 907 imply CMD_CLK 908 imply CMD_DM 909 imply CMD_SPL 910 imply FAT_WRITE 911 912config ARCH_ZYNQMP_R5 913 bool "Xilinx ZynqMP R5 based platform" 914 select CLK 915 select CPU_V7R 916 select DM 917 select DM_SERIAL 918 select OF_CONTROL 919 imply CMD_DM 920 921config ARCH_ZYNQMP 922 bool "Xilinx ZynqMP based platform" 923 select ARM64 924 select CLK 925 select DM 926 select DM_SERIAL 927 select DM_USB if USB 928 select OF_CONTROL 929 select SPL_BOARD_INIT if SPL 930 select SPL_CLK if SPL 931 select SUPPORT_SPL 932 imply BOARD_LATE_INIT 933 imply CMD_DM 934 imply FAT_WRITE 935 imply MP 936 937config TEGRA 938 bool "NVIDIA Tegra" 939 imply DISTRO_DEFAULTS 940 imply FAT_WRITE 941 942config TARGET_VEXPRESS64_AEMV8A 943 bool "Support vexpress_aemv8a" 944 select ARM64 945 select PL01X_SERIAL 946 947config TARGET_VEXPRESS64_BASE_FVP 948 bool "Support Versatile Express ARMv8a FVP BASE model" 949 select ARM64 950 select PL01X_SERIAL 951 select SEMIHOSTING 952 953config TARGET_VEXPRESS64_BASE_FVP_DRAM 954 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 955 select ARM64 956 select PL01X_SERIAL 957 help 958 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 959 the default config to allow the user to load the images directly into 960 DRAM using model parameters rather than by using semi-hosting to load 961 the files from the host filesystem. 962 963config TARGET_VEXPRESS64_JUNO 964 bool "Support Versatile Express Juno Development Platform" 965 select ARM64 966 select PL01X_SERIAL 967 968config TARGET_LS2080A_EMU 969 bool "Support ls2080a_emu" 970 select ARCH_LS2080A 971 select ARCH_MISC_INIT 972 select ARM64 973 select ARMV8_MULTIENTRY 974 help 975 Support for Freescale LS2080A_EMU platform 976 The LS2080A Development System (EMULATOR) is a pre silicon 977 development platform that supports the QorIQ LS2080A 978 Layerscape Architecture processor. 979 980config TARGET_LS2080A_SIMU 981 bool "Support ls2080a_simu" 982 select ARCH_LS2080A 983 select ARCH_MISC_INIT 984 select ARM64 985 select ARMV8_MULTIENTRY 986 help 987 Support for Freescale LS2080A_SIMU platform 988 The LS2080A Development System (QDS) is a pre silicon 989 development platform that supports the QorIQ LS2080A 990 Layerscape Architecture processor. 991 992config TARGET_LS1088AQDS 993 bool "Support ls1088aqds" 994 select ARCH_LS1088A 995 select ARCH_MISC_INIT 996 select ARM64 997 select ARMV8_MULTIENTRY 998 select BOARD_LATE_INIT 999 select SUPPORT_SPL 1000 help 1001 Support for NXP LS1088AQDS platform 1002 The LS1088A Development System (QDS) is a high-performance 1003 development platform that supports the QorIQ LS1088A 1004 Layerscape Architecture processor. 1005 1006config TARGET_LS2080AQDS 1007 bool "Support ls2080aqds" 1008 select ARCH_LS2080A 1009 select ARCH_MISC_INIT 1010 select ARM64 1011 select ARMV8_MULTIENTRY 1012 select BOARD_LATE_INIT 1013 select SUPPORT_SPL 1014 imply SCSI 1015 imply SCSI_AHCI 1016 help 1017 Support for Freescale LS2080AQDS platform 1018 The LS2080A Development System (QDS) is a high-performance 1019 development platform that supports the QorIQ LS2080A 1020 Layerscape Architecture processor. 1021 1022config TARGET_LS2080ARDB 1023 bool "Support ls2080ardb" 1024 select ARCH_LS2080A 1025 select ARCH_MISC_INIT 1026 select ARM64 1027 select ARMV8_MULTIENTRY 1028 select BOARD_LATE_INIT 1029 select SUPPORT_SPL 1030 imply SCSI 1031 imply SCSI_AHCI 1032 help 1033 Support for Freescale LS2080ARDB platform. 1034 The LS2080A Reference design board (RDB) is a high-performance 1035 development platform that supports the QorIQ LS2080A 1036 Layerscape Architecture processor. 1037 1038config TARGET_LS2081ARDB 1039 bool "Support ls2081ardb" 1040 select ARCH_LS2080A 1041 select ARCH_MISC_INIT 1042 select ARM64 1043 select ARMV8_MULTIENTRY 1044 select BOARD_LATE_INIT 1045 select SUPPORT_SPL 1046 help 1047 Support for Freescale LS2081ARDB platform. 1048 The LS2081A Reference design board (RDB) is a high-performance 1049 development platform that supports the QorIQ LS2081A/LS2041A 1050 Layerscape Architecture processor. 1051 1052config TARGET_HIKEY 1053 bool "Support HiKey 96boards Consumer Edition Platform" 1054 select ARM64 1055 select DM 1056 select DM_GPIO 1057 select DM_SERIAL 1058 select OF_CONTROL 1059 select PL01X_SERIAL 1060 select SPECIFY_CONSOLE_INDEX 1061 imply CMD_DM 1062 help 1063 Support for HiKey 96boards platform. It features a HI6220 1064 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 1065 1066config TARGET_POPLAR 1067 bool "Support Poplar 96boards Enterprise Edition Platform" 1068 select ARM64 1069 select DM 1070 select DM_SERIAL 1071 select DM_USB 1072 select OF_CONTROL 1073 select PL01X_SERIAL 1074 imply CMD_DM 1075 help 1076 Support for Poplar 96boards EE platform. It features a HI3798cv200 1077 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1078 making it capable of running any commercial set-top solution based on 1079 Linux or Android. 1080 1081config TARGET_LS1012AQDS 1082 bool "Support ls1012aqds" 1083 select ARCH_LS1012A 1084 select ARM64 1085 select BOARD_LATE_INIT 1086 help 1087 Support for Freescale LS1012AQDS platform. 1088 The LS1012A Development System (QDS) is a high-performance 1089 development platform that supports the QorIQ LS1012A 1090 Layerscape Architecture processor. 1091 1092config TARGET_LS1012ARDB 1093 bool "Support ls1012ardb" 1094 select ARCH_LS1012A 1095 select ARM64 1096 select BOARD_LATE_INIT 1097 imply SCSI 1098 imply SCSI_AHCI 1099 help 1100 Support for Freescale LS1012ARDB platform. 1101 The LS1012A Reference design board (RDB) is a high-performance 1102 development platform that supports the QorIQ LS1012A 1103 Layerscape Architecture processor. 1104 1105config TARGET_LS1012A2G5RDB 1106 bool "Support ls1012a2g5rdb" 1107 select ARCH_LS1012A 1108 select ARM64 1109 select BOARD_LATE_INIT 1110 imply SCSI 1111 help 1112 Support for Freescale LS1012A2G5RDB platform. 1113 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1114 development platform that supports the QorIQ LS1012A 1115 Layerscape Architecture processor. 1116 1117config TARGET_LS1012AFRWY 1118 bool "Support ls1012afrwy" 1119 select ARCH_LS1012A 1120 select ARM64 1121 select BOARD_LATE_INIT 1122 imply SCSI 1123 imply SCSI_AHCI 1124 help 1125 Support for Freescale LS1012AFRWY platform. 1126 The LS1012A FRWY board (FRWY) is a high-performance 1127 development platform that supports the QorIQ LS1012A 1128 Layerscape Architecture processor. 1129 1130config TARGET_LS1012AFRDM 1131 bool "Support ls1012afrdm" 1132 select ARCH_LS1012A 1133 select ARM64 1134 help 1135 Support for Freescale LS1012AFRDM platform. 1136 The LS1012A Freedom board (FRDM) is a high-performance 1137 development platform that supports the QorIQ LS1012A 1138 Layerscape Architecture processor. 1139 1140config TARGET_LS1088ARDB 1141 bool "Support ls1088ardb" 1142 select ARCH_LS1088A 1143 select ARCH_MISC_INIT 1144 select ARM64 1145 select ARMV8_MULTIENTRY 1146 select BOARD_LATE_INIT 1147 select SUPPORT_SPL 1148 help 1149 Support for NXP LS1088ARDB platform. 1150 The LS1088A Reference design board (RDB) is a high-performance 1151 development platform that supports the QorIQ LS1088A 1152 Layerscape Architecture processor. 1153 1154config TARGET_LS1021AQDS 1155 bool "Support ls1021aqds" 1156 select ARCH_LS1021A 1157 select ARCH_SUPPORT_PSCI 1158 select BOARD_EARLY_INIT_F 1159 select BOARD_LATE_INIT 1160 select CPU_V7A 1161 select CPU_V7_HAS_NONSEC 1162 select CPU_V7_HAS_VIRT 1163 select LS1_DEEP_SLEEP 1164 select SUPPORT_SPL 1165 select SYS_FSL_DDR 1166 imply SCSI 1167 1168config TARGET_LS1021ATWR 1169 bool "Support ls1021atwr" 1170 select ARCH_LS1021A 1171 select ARCH_SUPPORT_PSCI 1172 select BOARD_EARLY_INIT_F 1173 select BOARD_LATE_INIT 1174 select CPU_V7A 1175 select CPU_V7_HAS_NONSEC 1176 select CPU_V7_HAS_VIRT 1177 select LS1_DEEP_SLEEP 1178 select SUPPORT_SPL 1179 imply SCSI 1180 1181config TARGET_LS1021AIOT 1182 bool "Support ls1021aiot" 1183 select ARCH_LS1021A 1184 select ARCH_SUPPORT_PSCI 1185 select BOARD_LATE_INIT 1186 select CPU_V7A 1187 select CPU_V7_HAS_NONSEC 1188 select CPU_V7_HAS_VIRT 1189 select SUPPORT_SPL 1190 imply SCSI 1191 help 1192 Support for Freescale LS1021AIOT platform. 1193 The LS1021A Freescale board (IOT) is a high-performance 1194 development platform that supports the QorIQ LS1021A 1195 Layerscape Architecture processor. 1196 1197config TARGET_LS1043AQDS 1198 bool "Support ls1043aqds" 1199 select ARCH_LS1043A 1200 select ARM64 1201 select ARMV8_MULTIENTRY 1202 select BOARD_EARLY_INIT_F 1203 select BOARD_LATE_INIT 1204 select SUPPORT_SPL 1205 imply SCSI 1206 help 1207 Support for Freescale LS1043AQDS platform. 1208 1209config TARGET_LS1043ARDB 1210 bool "Support ls1043ardb" 1211 select ARCH_LS1043A 1212 select ARM64 1213 select ARMV8_MULTIENTRY 1214 select BOARD_EARLY_INIT_F 1215 select BOARD_LATE_INIT 1216 select SUPPORT_SPL 1217 imply SCSI 1218 help 1219 Support for Freescale LS1043ARDB platform. 1220 1221config TARGET_LS1046AQDS 1222 bool "Support ls1046aqds" 1223 select ARCH_LS1046A 1224 select ARM64 1225 select ARMV8_MULTIENTRY 1226 select BOARD_EARLY_INIT_F 1227 select BOARD_LATE_INIT 1228 select DM_SPI_FLASH if DM_SPI 1229 select SUPPORT_SPL 1230 imply SCSI 1231 help 1232 Support for Freescale LS1046AQDS platform. 1233 The LS1046A Development System (QDS) is a high-performance 1234 development platform that supports the QorIQ LS1046A 1235 Layerscape Architecture processor. 1236 1237config TARGET_LS1046ARDB 1238 bool "Support ls1046ardb" 1239 select ARCH_LS1046A 1240 select ARM64 1241 select ARMV8_MULTIENTRY 1242 select BOARD_EARLY_INIT_F 1243 select BOARD_LATE_INIT 1244 select DM_SPI_FLASH if DM_SPI 1245 select POWER_MC34VR500 1246 select SUPPORT_SPL 1247 imply SCSI 1248 help 1249 Support for Freescale LS1046ARDB platform. 1250 The LS1046A Reference Design Board (RDB) is a high-performance 1251 development platform that supports the QorIQ LS1046A 1252 Layerscape Architecture processor. 1253 1254config TARGET_H2200 1255 bool "Support h2200" 1256 select CPU_PXA 1257 1258config TARGET_ZIPITZ2 1259 bool "Support zipitz2" 1260 select CPU_PXA 1261 1262config TARGET_COLIBRI_PXA270 1263 bool "Support colibri_pxa270" 1264 select CPU_PXA 1265 1266config ARCH_UNIPHIER 1267 bool "Socionext UniPhier SoCs" 1268 select BOARD_LATE_INIT 1269 select DM 1270 select DM_GPIO 1271 select DM_I2C 1272 select DM_MMC 1273 select DM_RESET 1274 select DM_SERIAL 1275 select DM_USB 1276 select OF_BOARD_SETUP 1277 select OF_CONTROL 1278 select OF_LIBFDT 1279 select PINCTRL 1280 select SPL_BOARD_INIT if SPL 1281 select SPL_DM if SPL 1282 select SPL_LIBCOMMON_SUPPORT if SPL 1283 select SPL_LIBGENERIC_SUPPORT if SPL 1284 select SPL_OF_CONTROL if SPL 1285 select SPL_PINCTRL if SPL 1286 select SUPPORT_SPL 1287 imply CMD_DM 1288 imply DISTRO_DEFAULTS 1289 imply FAT_WRITE 1290 help 1291 Support for UniPhier SoC family developed by Socionext Inc. 1292 (formerly, System LSI Business Division of Panasonic Corporation) 1293 1294config STM32 1295 bool "Support STMicroelectronics STM32 MCU with cortex M" 1296 select CPU_V7M 1297 select DM 1298 select DM_SERIAL 1299 imply CMD_DM 1300 1301config ARCH_STI 1302 bool "Support STMicrolectronics SoCs" 1303 select BLK 1304 select CPU_V7A 1305 select DM 1306 select DM_MMC 1307 select DM_RESET 1308 select DM_SERIAL 1309 imply CMD_DM 1310 help 1311 Support for STMicroelectronics STiH407/10 SoC family. 1312 This SoC is used on Linaro 96Board STiH410-B2260 1313 1314config ARCH_STM32MP 1315 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1316 select ARCH_MISC_INIT 1317 select BOARD_LATE_INIT 1318 select CLK 1319 select DM 1320 select DM_GPIO 1321 select DM_RESET 1322 select DM_SERIAL 1323 select MISC 1324 select OF_CONTROL 1325 select OF_LIBFDT 1326 select PINCTRL 1327 select REGMAP 1328 select SUPPORT_SPL 1329 select SYSCON 1330 select SYSRESET 1331 select SYS_THUMB_BUILD 1332 imply CMD_DM 1333 help 1334 Support for STM32MP SoC family developed by STMicroelectronics, 1335 MPUs based on ARM cortex A core 1336 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1337 BootLoader (FSBL) 1338 1339config ARCH_ROCKCHIP 1340 bool "Support Rockchip SoCs" 1341 select BLK 1342 select DM 1343 select DM_GPIO 1344 select DM_I2C 1345 select DM_MMC 1346 select DM_PWM 1347 select DM_REGULATOR 1348 select DM_SERIAL 1349 select DM_SPI 1350 select DM_SPI_FLASH 1351 select DM_USB if USB 1352 select ENABLE_ARM_SOC_BOOT0_HOOK 1353 select OF_CONTROL 1354 select SPI 1355 select SPL_DM if SPL 1356 select SPL_SYS_MALLOC_SIMPLE if SPL 1357 select SYS_MALLOC_F 1358 select SYS_THUMB_BUILD if !ARM64 1359 imply ADC 1360 imply CMD_DM 1361 imply DISTRO_DEFAULTS 1362 imply FAT_WRITE 1363 imply SARADC_ROCKCHIP 1364 imply SPL_SYSRESET 1365 imply SYS_NS16550 1366 imply TPL_SYSRESET 1367 imply USB_FUNCTION_FASTBOOT 1368 1369config TARGET_THUNDERX_88XX 1370 bool "Support ThunderX 88xx" 1371 select ARM64 1372 select OF_CONTROL 1373 select PL01X_SERIAL 1374 select SYS_CACHE_SHIFT_7 1375 1376config ARCH_ASPEED 1377 bool "Support Aspeed SoCs" 1378 select DM 1379 select OF_CONTROL 1380 imply CMD_DM 1381 1382endchoice 1383 1384config TI_SECURE_DEVICE 1385 bool "HS Device Type Support" 1386 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1387 help 1388 If a high secure (HS) device type is being used, this config 1389 must be set. This option impacts various aspects of the 1390 build system (to create signed boot images that can be 1391 authenticated) and the code. See the doc/README.ti-secure 1392 file for further details. 1393 1394source "arch/arm/mach-aspeed/Kconfig" 1395 1396source "arch/arm/mach-at91/Kconfig" 1397 1398source "arch/arm/mach-bcm283x/Kconfig" 1399 1400source "arch/arm/mach-bcmstb/Kconfig" 1401 1402source "arch/arm/mach-davinci/Kconfig" 1403 1404source "arch/arm/mach-exynos/Kconfig" 1405 1406source "arch/arm/mach-highbank/Kconfig" 1407 1408source "arch/arm/mach-integrator/Kconfig" 1409 1410source "arch/arm/mach-k3/Kconfig" 1411 1412source "arch/arm/mach-keystone/Kconfig" 1413 1414source "arch/arm/mach-kirkwood/Kconfig" 1415 1416source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" 1417 1418source "arch/arm/mach-mvebu/Kconfig" 1419 1420source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1421 1422source "arch/arm/mach-imx/mx2/Kconfig" 1423 1424source "arch/arm/mach-imx/mx3/Kconfig" 1425 1426source "arch/arm/mach-imx/mx5/Kconfig" 1427 1428source "arch/arm/mach-imx/mx6/Kconfig" 1429 1430source "arch/arm/mach-imx/mx7/Kconfig" 1431 1432source "arch/arm/mach-imx/mx7ulp/Kconfig" 1433 1434source "arch/arm/mach-imx/imx8/Kconfig" 1435 1436source "arch/arm/mach-imx/mx8m/Kconfig" 1437 1438source "arch/arm/mach-imx/mxs/Kconfig" 1439 1440source "arch/arm/mach-omap2/Kconfig" 1441 1442source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1443 1444source "arch/arm/mach-orion5x/Kconfig" 1445 1446source "arch/arm/mach-owl/Kconfig" 1447 1448source "arch/arm/mach-rmobile/Kconfig" 1449 1450source "arch/arm/mach-meson/Kconfig" 1451 1452source "arch/arm/mach-qemu/Kconfig" 1453 1454source "arch/arm/mach-rockchip/Kconfig" 1455 1456source "arch/arm/mach-s5pc1xx/Kconfig" 1457 1458source "arch/arm/mach-snapdragon/Kconfig" 1459 1460source "arch/arm/mach-socfpga/Kconfig" 1461 1462source "arch/arm/mach-sti/Kconfig" 1463 1464source "arch/arm/mach-stm32/Kconfig" 1465 1466source "arch/arm/mach-stm32mp/Kconfig" 1467 1468source "arch/arm/mach-sunxi/Kconfig" 1469 1470source "arch/arm/mach-tegra/Kconfig" 1471 1472source "arch/arm/mach-uniphier/Kconfig" 1473 1474source "arch/arm/cpu/armv7/vf610/Kconfig" 1475 1476source "arch/arm/mach-zynq/Kconfig" 1477 1478source "arch/arm/mach-versal/Kconfig" 1479 1480source "arch/arm/mach-zynqmp-r5/Kconfig" 1481 1482source "arch/arm/cpu/armv7/Kconfig" 1483 1484source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1485 1486source "arch/arm/cpu/armv8/Kconfig" 1487 1488source "arch/arm/mach-imx/Kconfig" 1489 1490source "board/bosch/shc/Kconfig" 1491source "board/CarMediaLab/flea3/Kconfig" 1492source "board/Marvell/aspenite/Kconfig" 1493source "board/Marvell/gplugd/Kconfig" 1494source "board/armadeus/apf27/Kconfig" 1495source "board/armltd/vexpress/Kconfig" 1496source "board/armltd/vexpress64/Kconfig" 1497source "board/broadcom/bcm23550_w1d/Kconfig" 1498source "board/broadcom/bcm28155_ap/Kconfig" 1499source "board/broadcom/bcm968580xref/Kconfig" 1500source "board/broadcom/bcmcygnus/Kconfig" 1501source "board/broadcom/bcmnsp/Kconfig" 1502source "board/broadcom/bcmns2/Kconfig" 1503source "board/cavium/thunderx/Kconfig" 1504source "board/cirrus/edb93xx/Kconfig" 1505source "board/eets/pdu001/Kconfig" 1506source "board/emulation/qemu-arm/Kconfig" 1507source "board/freescale/ls2080a/Kconfig" 1508source "board/freescale/ls2080aqds/Kconfig" 1509source "board/freescale/ls2080ardb/Kconfig" 1510source "board/freescale/ls1088a/Kconfig" 1511source "board/freescale/ls1021aqds/Kconfig" 1512source "board/freescale/ls1043aqds/Kconfig" 1513source "board/freescale/ls1021atwr/Kconfig" 1514source "board/freescale/ls1021aiot/Kconfig" 1515source "board/freescale/ls1046aqds/Kconfig" 1516source "board/freescale/ls1043ardb/Kconfig" 1517source "board/freescale/ls1046ardb/Kconfig" 1518source "board/freescale/ls1012aqds/Kconfig" 1519source "board/freescale/ls1012ardb/Kconfig" 1520source "board/freescale/ls1012afrdm/Kconfig" 1521source "board/freescale/mx35pdk/Kconfig" 1522source "board/freescale/s32v234evb/Kconfig" 1523source "board/grinn/chiliboard/Kconfig" 1524source "board/gumstix/pepper/Kconfig" 1525source "board/h2200/Kconfig" 1526source "board/hisilicon/hikey/Kconfig" 1527source "board/hisilicon/poplar/Kconfig" 1528source "board/isee/igep003x/Kconfig" 1529source "board/phytec/pcm051/Kconfig" 1530source "board/silica/pengwyn/Kconfig" 1531source "board/spear/spear300/Kconfig" 1532source "board/spear/spear310/Kconfig" 1533source "board/spear/spear320/Kconfig" 1534source "board/spear/spear600/Kconfig" 1535source "board/spear/x600/Kconfig" 1536source "board/st/stv0991/Kconfig" 1537source "board/tcl/sl50/Kconfig" 1538source "board/ucRobotics/bubblegum_96/Kconfig" 1539source "board/birdland/bav335x/Kconfig" 1540source "board/toradex/colibri_pxa270/Kconfig" 1541source "board/vscom/baltos/Kconfig" 1542source "board/woodburn/Kconfig" 1543source "board/xilinx/Kconfig" 1544source "board/xilinx/zynq/Kconfig" 1545source "board/xilinx/zynqmp/Kconfig" 1546source "board/zipitz2/Kconfig" 1547 1548source "arch/arm/Kconfig.debug" 1549 1550endmenu 1551 1552config SPL_LDSCRIPT 1553 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1554 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1555 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1556 1557 1558