1# 2# SPDX-License-Identifier: GPL-2.0+ 3# 4 5VERSION = 2016 6PATCHLEVEL = 11 7SUBLEVEL = 8EXTRAVERSION = -rc1 9NAME = 10 11# *DOCUMENTATION* 12# To see a list of typical targets execute "make help" 13# More info can be located in ./README 14# Comments in this file are targeted only to the developer, do not 15# expect to learn how to build the kernel reading this file. 16 17# o Do not use make's built-in rules and variables 18# (this increases performance and avoids hard-to-debug behaviour); 19# o Look for make include files relative to root of kernel src 20MAKEFLAGS += -rR --include-dir=$(CURDIR) 21 22# Avoid funny character set dependencies 23unexport LC_ALL 24LC_COLLATE=C 25LC_NUMERIC=C 26export LC_COLLATE LC_NUMERIC 27 28# Avoid interference with shell env settings 29unexport GREP_OPTIONS 30 31# We are using a recursive build, so we need to do a little thinking 32# to get the ordering right. 33# 34# Most importantly: sub-Makefiles should only ever modify files in 35# their own directory. If in some directory we have a dependency on 36# a file in another dir (which doesn't happen often, but it's often 37# unavoidable when linking the built-in.o targets which finally 38# turn into vmlinux), we will call a sub make in that other dir, and 39# after that we are sure that everything which is in that other dir 40# is now up to date. 41# 42# The only cases where we need to modify files which have global 43# effects are thus separated out and done before the recursive 44# descending is started. They are now explicitly listed as the 45# prepare rule. 46 47# Beautify output 48# --------------------------------------------------------------------------- 49# 50# Normally, we echo the whole command before executing it. By making 51# that echo $($(quiet)$(cmd)), we now have the possibility to set 52# $(quiet) to choose other forms of output instead, e.g. 53# 54# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 55# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 56# 57# If $(quiet) is empty, the whole command will be printed. 58# If it is set to "quiet_", only the short version will be printed. 59# If it is set to "silent_", nothing will be printed at all, since 60# the variable $(silent_cmd_cc_o_c) doesn't exist. 61# 62# A simple variant is to prefix commands with $(Q) - that's useful 63# for commands that shall be hidden in non-verbose mode. 64# 65# $(Q)ln $@ :< 66# 67# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 68# If KBUILD_VERBOSE equals 1 then the above command is displayed. 69# 70# To put more focus on warnings, be less verbose as default 71# Use 'make V=1' to see the full commands 72 73ifeq ("$(origin V)", "command line") 74 KBUILD_VERBOSE = $(V) 75endif 76ifndef KBUILD_VERBOSE 77 KBUILD_VERBOSE = 0 78endif 79 80ifeq ($(KBUILD_VERBOSE),1) 81 quiet = 82 Q = 83else 84 quiet=quiet_ 85 Q = @ 86endif 87 88# If the user is running make -s (silent mode), suppress echoing of 89# commands 90 91ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 92ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) 93 quiet=silent_ 94endif 95else # make-3.8x 96ifneq ($(filter s% -s%,$(MAKEFLAGS)),) 97 quiet=silent_ 98endif 99endif 100 101export quiet Q KBUILD_VERBOSE 102 103# kbuild supports saving output files in a separate directory. 104# To locate output files in a separate directory two syntaxes are supported. 105# In both cases the working directory must be the root of the kernel src. 106# 1) O= 107# Use "make O=dir/to/store/output/files/" 108# 109# 2) Set KBUILD_OUTPUT 110# Set the environment variable KBUILD_OUTPUT to point to the directory 111# where the output files shall be placed. 112# export KBUILD_OUTPUT=dir/to/store/output/files/ 113# make 114# 115# The O= assignment takes precedence over the KBUILD_OUTPUT environment 116# variable. 117 118# KBUILD_SRC is set on invocation of make in OBJ directory 119# KBUILD_SRC is not intended to be used by the regular user (for now) 120ifeq ($(KBUILD_SRC),) 121 122# OK, Make called in directory where kernel src resides 123# Do we want to locate output files in a separate directory? 124ifeq ("$(origin O)", "command line") 125 KBUILD_OUTPUT := $(O) 126endif 127 128# That's our default target when none is given on the command line 129PHONY := _all 130_all: 131 132# Cancel implicit rules on top Makefile 133$(CURDIR)/Makefile Makefile: ; 134 135ifneq ($(KBUILD_OUTPUT),) 136# Invoke a second make in the output directory, passing relevant variables 137# check that the output directory actually exists 138saved-output := $(KBUILD_OUTPUT) 139KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ 140 && /bin/pwd) 141$(if $(KBUILD_OUTPUT),, \ 142 $(error failed to create output directory "$(saved-output)")) 143 144PHONY += $(MAKECMDGOALS) sub-make 145 146$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make 147 @: 148 149sub-make: FORCE 150 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ 151 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) 152 153# Leave processing to above invocation of make 154skip-makefile := 1 155endif # ifneq ($(KBUILD_OUTPUT),) 156endif # ifeq ($(KBUILD_SRC),) 157 158# We process the rest of the Makefile if this is the final invocation of make 159ifeq ($(skip-makefile),) 160 161# Do not print "Entering directory ...", 162# but we want to display it when entering to the output directory 163# so that IDEs/editors are able to understand relative filenames. 164MAKEFLAGS += --no-print-directory 165 166# Call a source code checker (by default, "sparse") as part of the 167# C compilation. 168# 169# Use 'make C=1' to enable checking of only re-compiled files. 170# Use 'make C=2' to enable checking of *all* source files, regardless 171# of whether they are re-compiled or not. 172# 173# See the file "Documentation/sparse.txt" for more details, including 174# where to get the "sparse" utility. 175 176ifeq ("$(origin C)", "command line") 177 KBUILD_CHECKSRC = $(C) 178endif 179ifndef KBUILD_CHECKSRC 180 KBUILD_CHECKSRC = 0 181endif 182 183# Use make M=dir to specify directory of external module to build 184# Old syntax make ... SUBDIRS=$PWD is still supported 185# Setting the environment variable KBUILD_EXTMOD take precedence 186ifdef SUBDIRS 187 KBUILD_EXTMOD ?= $(SUBDIRS) 188endif 189 190ifeq ("$(origin M)", "command line") 191 KBUILD_EXTMOD := $(M) 192endif 193 194# If building an external module we do not care about the all: rule 195# but instead _all depend on modules 196PHONY += all 197ifeq ($(KBUILD_EXTMOD),) 198_all: all 199else 200_all: modules 201endif 202 203ifeq ($(KBUILD_SRC),) 204 # building in the source tree 205 srctree := . 206else 207 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) 208 # building in a subdirectory of the source tree 209 srctree := .. 210 else 211 srctree := $(KBUILD_SRC) 212 endif 213endif 214objtree := . 215src := $(srctree) 216obj := $(objtree) 217 218VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 219 220export srctree objtree VPATH 221 222# Make sure CDPATH settings don't interfere 223unexport CDPATH 224 225######################################################################### 226 227HOSTARCH := $(shell uname -m | \ 228 sed -e s/i.86/x86/ \ 229 -e s/sun4u/sparc64/ \ 230 -e s/arm.*/arm/ \ 231 -e s/sa110/arm/ \ 232 -e s/ppc64/powerpc/ \ 233 -e s/ppc/powerpc/ \ 234 -e s/macppc/powerpc/\ 235 -e s/sh.*/sh/) 236 237HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 238 sed -e 's/\(cygwin\).*/cygwin/') 239 240export HOSTARCH HOSTOS 241 242######################################################################### 243 244# set default to nothing for native builds 245ifeq ($(HOSTARCH),$(ARCH)) 246CROSS_COMPILE ?= 247endif 248 249KCONFIG_CONFIG ?= .config 250export KCONFIG_CONFIG 251 252# SHELL used by kbuild 253CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 254 else if [ -x /bin/bash ]; then echo /bin/bash; \ 255 else echo sh; fi ; fi) 256 257HOSTCC = cc 258HOSTCXX = c++ 259HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \ 260 $(if $(CONFIG_TOOLS_DEBUG),-g) 261HOSTCXXFLAGS = -O2 262 263ifeq ($(HOSTOS),cygwin) 264HOSTCFLAGS += -ansi 265endif 266 267# Mac OS X / Darwin's C preprocessor is Apple specific. It 268# generates numerous errors and warnings. We want to bypass it 269# and use GNU C's cpp. To do this we pass the -traditional-cpp 270# option to the compiler. Note that the -traditional-cpp flag 271# DOES NOT have the same semantics as GNU C's flag, all it does 272# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. 273# 274# Apple's linker is similar, thanks to the new 2 stage linking 275# multiple symbol definitions are treated as errors, hence the 276# -multiply_defined suppress option to turn off this error. 277# 278ifeq ($(HOSTOS),darwin) 279# get major and minor product version (e.g. '10' and '6' for Snow Leopard) 280DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') 281DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') 282 283os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ 284 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) 285 286# Snow Leopards build environment has no longer restrictions as described above 287HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") 288HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") 289HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") 290 291# since Lion (10.7) ASLR is on by default, but we use linker generated lists 292# in some host tools which is a problem then ... so disable ASLR for these 293# tools 294HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie") 295endif 296 297# Decide whether to build built-in, modular, or both. 298# Normally, just do built-in. 299 300KBUILD_MODULES := 301KBUILD_BUILTIN := 1 302 303# If we have only "make modules", don't compile built-in objects. 304# When we're building modules with modversions, we need to consider 305# the built-in objects during the descend as well, in order to 306# make sure the checksums are up to date before we record them. 307 308ifeq ($(MAKECMDGOALS),modules) 309 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 310endif 311 312# If we have "make <whatever> modules", compile modules 313# in addition to whatever we do anyway. 314# Just "make" or "make all" shall build modules as well 315 316# U-Boot does not need modules 317#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 318# KBUILD_MODULES := 1 319#endif 320 321#ifeq ($(MAKECMDGOALS),) 322# KBUILD_MODULES := 1 323#endif 324 325export KBUILD_MODULES KBUILD_BUILTIN 326export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 327 328# We need some generic definitions (do not try to remake the file). 329scripts/Kbuild.include: ; 330include scripts/Kbuild.include 331 332# Make variables (CC, etc...) 333 334AS = $(CROSS_COMPILE)as 335# Always use GNU ld 336ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) 337LD = $(CROSS_COMPILE)ld.bfd 338else 339LD = $(CROSS_COMPILE)ld 340endif 341CC = $(CROSS_COMPILE)gcc 342CPP = $(CC) -E 343AR = $(CROSS_COMPILE)ar 344NM = $(CROSS_COMPILE)nm 345LDR = $(CROSS_COMPILE)ldr 346STRIP = $(CROSS_COMPILE)strip 347OBJCOPY = $(CROSS_COMPILE)objcopy 348OBJDUMP = $(CROSS_COMPILE)objdump 349AWK = awk 350PERL = perl 351PYTHON = python 352DTC = dtc 353CHECK = sparse 354 355CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 356 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) 357 358KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ 359 360KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ 361 -Wno-format-security \ 362 -fno-builtin -ffreestanding 363KBUILD_AFLAGS := -D__ASSEMBLY__ 364 365# Read UBOOTRELEASE from include/config/uboot.release (if it exists) 366UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) 367UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 368 369export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION 370export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR 371export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC 372export CPP AR NM LDR STRIP OBJCOPY OBJDUMP 373export MAKE AWK PERL PYTHON 374export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS 375 376export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS 377export KBUILD_CFLAGS KBUILD_AFLAGS 378 379# When compiling out-of-tree modules, put MODVERDIR in the module 380# tree rather than in the kernel tree. The kernel tree might 381# even be read-only. 382export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 383 384# Files to ignore in find ... statements 385 386export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 387 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 388 -prune -o 389export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 390 --exclude CVS --exclude .pc --exclude .hg --exclude .git 391 392# =========================================================================== 393# Rules shared between *config targets and build targets 394 395# Basic helpers built in scripts/ 396PHONY += scripts_basic 397scripts_basic: 398 $(Q)$(MAKE) $(build)=scripts/basic 399 $(Q)rm -f .tmp_quiet_recordmcount 400 401# To avoid any implicit rule to kick in, define an empty command. 402scripts/basic/%: scripts_basic ; 403 404PHONY += outputmakefile 405# outputmakefile generates a Makefile in the output directory, if using a 406# separate output directory. This allows convenient use of make in the 407# output directory. 408outputmakefile: 409ifneq ($(KBUILD_SRC),) 410 $(Q)ln -fsn $(srctree) source 411 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ 412 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) 413endif 414 415# To make sure we do not include .config for any of the *config targets 416# catch them early, and hand them over to scripts/kconfig/Makefile 417# It is allowed to specify more targets when calling make, including 418# mixing *config targets and build targets. 419# For example 'make oldconfig all'. 420# Detect when mixed targets is specified, and make a second invocation 421# of make so .config is not included in this case either (for *config). 422 423version_h := include/generated/version_autogenerated.h 424timestamp_h := include/generated/timestamp_autogenerated.h 425 426no-dot-config-targets := clean clobber mrproper distclean \ 427 help %docs check% coccicheck \ 428 ubootversion backup tests 429 430config-targets := 0 431mixed-targets := 0 432dot-config := 1 433 434ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 435 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 436 dot-config := 0 437 endif 438endif 439 440ifeq ($(KBUILD_EXTMOD),) 441 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 442 config-targets := 1 443 ifneq ($(words $(MAKECMDGOALS)),1) 444 mixed-targets := 1 445 endif 446 endif 447endif 448 449ifeq ($(mixed-targets),1) 450# =========================================================================== 451# We're called with mixed targets (*config and build targets). 452# Handle them one by one. 453 454PHONY += $(MAKECMDGOALS) __build_one_by_one 455 456$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one 457 @: 458 459__build_one_by_one: 460 $(Q)set -e; \ 461 for i in $(MAKECMDGOALS); do \ 462 $(MAKE) -f $(srctree)/Makefile $$i; \ 463 done 464 465else 466ifeq ($(config-targets),1) 467# =========================================================================== 468# *config targets only - make sure prerequisites are updated, and descend 469# in scripts/kconfig to make the *config target 470 471KBUILD_DEFCONFIG := sandbox_defconfig 472export KBUILD_DEFCONFIG KBUILD_KCONFIG 473 474config: scripts_basic outputmakefile FORCE 475 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 476 477%config: scripts_basic outputmakefile FORCE 478 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 479 480else 481# =========================================================================== 482# Build targets only - this includes vmlinux, arch specific targets, clean 483# targets and others. In general all targets except *config targets. 484 485ifeq ($(dot-config),1) 486# Read in config 487-include include/config/auto.conf 488 489# Read in dependencies to all Kconfig* files, make sure to run 490# oldconfig if changes are detected. 491-include include/config/auto.conf.cmd 492 493# To avoid any implicit rule to kick in, define an empty command 494$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; 495 496# If .config is newer than include/config/auto.conf, someone tinkered 497# with it and forgot to run make oldconfig. 498# if auto.conf.cmd is missing then we are probably in a cleaned tree so 499# we execute the config step to be sure to catch updated Kconfig files 500include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd 501 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig 502 @# If the following part fails, include/config/auto.conf should be 503 @# deleted so "make silentoldconfig" will be re-run on the next build. 504 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \ 505 { rm -f include/config/auto.conf; false; } 506 @# include/config.h has been updated after "make silentoldconfig". 507 @# We need to touch include/config/auto.conf so it gets newer 508 @# than include/config.h. 509 @# Otherwise, 'make silentoldconfig' would be invoked twice. 510 $(Q)touch include/config/auto.conf 511 512-include include/autoconf.mk 513-include include/autoconf.mk.dep 514 515# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf 516# is up-to-date. When we switch to a different board configuration, old CONFIG 517# macros are still remaining in include/config/auto.conf. Without the following 518# gimmick, wrong config.mk would be included leading nasty warnings/errors. 519ifneq ($(wildcard $(KCONFIG_CONFIG)),) 520ifneq ($(wildcard include/config/auto.conf),) 521autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \ 522 include/config/auto.conf) 523ifeq ($(autoconf_is_old),) 524include config.mk 525include arch/$(ARCH)/Makefile 526endif 527endif 528endif 529 530# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use 531# that (or fail if absent). Otherwise, search for a linker script in a 532# standard location. 533 534ifndef LDSCRIPT 535 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug 536 ifdef CONFIG_SYS_LDSCRIPT 537 # need to strip off double quotes 538 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%) 539 endif 540endif 541 542# If there is no specified link script, we look in a number of places for it 543ifndef LDSCRIPT 544 ifeq ($(wildcard $(LDSCRIPT)),) 545 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds 546 endif 547 ifeq ($(wildcard $(LDSCRIPT)),) 548 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds 549 endif 550 ifeq ($(wildcard $(LDSCRIPT)),) 551 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds 552 endif 553endif 554 555else 556# Dummy target needed, because used as prerequisite 557include/config/auto.conf: ; 558endif # $(dot-config) 559 560# 561# Xtensa linker script cannot be preprocessed with -ansi because of 562# preprocessor operations on strings that don't make C identifiers. 563# 564ifeq ($(CONFIG_XTENSA),) 565LDPPFLAGS += -ansi 566endif 567 568ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 569KBUILD_CFLAGS += -Os 570else 571KBUILD_CFLAGS += -O2 572endif 573 574KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) 575KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks) 576 577KBUILD_CFLAGS += -g 578# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> 579# option to the assembler. 580KBUILD_AFLAGS += -g 581 582# Report stack usage if supported 583ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y) 584 KBUILD_CFLAGS += -fstack-usage 585endif 586 587KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) 588 589# turn jbsr into jsr for m68k 590ifeq ($(ARCH),m68k) 591ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) 592KBUILD_AFLAGS += -Wa,-gstabs,-S 593endif 594endif 595 596# Prohibit date/time macros, which would make the build non-deterministic 597KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) 598 599include scripts/Makefile.extrawarn 600 601# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 602KBUILD_CPPFLAGS += $(KCPPFLAGS) 603KBUILD_AFLAGS += $(KAFLAGS) 604KBUILD_CFLAGS += $(KCFLAGS) 605 606# Use UBOOTINCLUDE when you must reference the include/ directory. 607# Needed to be compatible with the O= option 608UBOOTINCLUDE := \ 609 -Iinclude \ 610 $(if $(KBUILD_SRC), -I$(srctree)/include) \ 611 $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \ 612 -I$(srctree)/arch/$(ARCH)/thumb1/include),) \ 613 -I$(srctree)/arch/$(ARCH)/include \ 614 -include $(srctree)/include/linux/kconfig.h 615 616NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 617CHECKFLAGS += $(NOSTDINC_FLAGS) 618 619# FIX ME 620cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 621 $(NOSTDINC_FLAGS) 622c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 623 624######################################################################### 625# U-Boot objects....order is important (i.e. start must be first) 626 627HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 628 629libs-y += lib/ 630libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 631libs-$(CONFIG_OF_EMBED) += dts/ 632libs-y += fs/ 633libs-y += net/ 634libs-y += disk/ 635libs-y += drivers/ 636libs-y += drivers/dma/ 637libs-y += drivers/gpio/ 638libs-y += drivers/i2c/ 639libs-y += drivers/mmc/ 640libs-y += drivers/mtd/ 641libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ 642libs-y += drivers/mtd/onenand/ 643libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ 644libs-y += drivers/mtd/spi/ 645libs-y += drivers/net/ 646libs-y += drivers/net/phy/ 647libs-y += drivers/pci/ 648libs-y += drivers/power/ \ 649 drivers/power/domain/ \ 650 drivers/power/fuel_gauge/ \ 651 drivers/power/mfd/ \ 652 drivers/power/pmic/ \ 653 drivers/power/battery/ \ 654 drivers/power/regulator/ 655libs-y += drivers/spi/ 656libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ 657libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ 658libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/ 659libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/ 660libs-y += drivers/serial/ 661libs-y += drivers/usb/dwc3/ 662libs-y += drivers/usb/common/ 663libs-y += drivers/usb/emul/ 664libs-y += drivers/usb/eth/ 665libs-y += drivers/usb/gadget/ 666libs-y += drivers/usb/gadget/udc/ 667libs-y += drivers/usb/host/ 668libs-y += drivers/usb/musb/ 669libs-y += drivers/usb/musb-new/ 670libs-y += drivers/usb/phy/ 671libs-y += drivers/usb/ulpi/ 672libs-y += cmd/ 673libs-y += common/ 674libs-$(CONFIG_API) += api/ 675libs-$(CONFIG_HAS_POST) += post/ 676libs-y += test/ 677libs-y += test/dm/ 678libs-$(CONFIG_UT_ENV) += test/env/ 679libs-$(CONFIG_UT_OVERLAY) += test/overlay/ 680 681libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 682 683libs-y := $(sort $(libs-y)) 684 685u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples 686 687u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-)))) 688 689libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 690 691u-boot-init := $(head-y) 692u-boot-main := $(libs-y) 693 694 695# Add GCC lib 696ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 697PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 698else 699PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc 700endif 701PLATFORM_LIBS += $(PLATFORM_LIBGCC) 702export PLATFORM_LIBS 703export PLATFORM_LIBGCC 704 705# Special flags for CPP when processing the linker script. 706# Pass the version down so we can handle backwards compatibility 707# on the fly. 708LDPPFLAGS += \ 709 -include $(srctree)/include/u-boot/u-boot.lds.h \ 710 -DCPUDIR=$(CPUDIR) \ 711 $(shell $(LD) --version | \ 712 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 713 714######################################################################### 715######################################################################### 716 717ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) 718BOARD_SIZE_CHECK = \ 719 @actual=`wc -c $@ | awk '{print $$1}'`; \ 720 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ 721 if test $$actual -gt $$limit; then \ 722 echo "$@ exceeds file size limit:" >&2 ; \ 723 echo " limit: $$limit bytes" >&2 ; \ 724 echo " actual: $$actual bytes" >&2 ; \ 725 echo " excess: $$((actual - limit)) bytes" >&2; \ 726 exit 1; \ 727 fi 728else 729BOARD_SIZE_CHECK = 730endif 731 732# Statically apply RELA-style relocations (currently arm64 only) 733ifneq ($(CONFIG_STATIC_RELA),) 734# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base 735DO_STATIC_RELA = \ 736 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ 737 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ 738 tools/relocate-rela $(2) $(3) $$start $$end 739else 740DO_STATIC_RELA = 741endif 742 743# Always append ALL so that arch config.mk's can add custom ones 744ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check 745 746ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin 747ifeq ($(CONFIG_SPL_FSL_PBL),y) 748ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin 749else 750ifneq ($(CONFIG_SECURE_BOOT), y) 751# For Secure Boot The Image needs to be signed and Header must also 752# be included. So The image has to be built explicitly 753ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl 754endif 755endif 756ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin 757ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img 758ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin 759ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb 760ifeq ($(CONFIG_SPL_FRAMEWORK),y) 761ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img 762endif 763ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb 764ifneq ($(CONFIG_SPL_TARGET),) 765ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) 766endif 767ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf 768ALL-$(CONFIG_EFI_APP) += u-boot-app.efi 769ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi 770 771ifneq ($(BUILD_ROM),) 772ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom 773endif 774 775# enable combined SPL/u-boot/dtb rules for tegra 776ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy) 777ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin 778ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin 779endif 780 781# Add optional build target if defined in board/cpu/soc headers 782ifneq ($(CONFIG_BUILD_TARGET),) 783ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) 784endif 785 786LDFLAGS_u-boot += $(LDFLAGS_FINAL) 787ifneq ($(CONFIG_SYS_TEXT_BASE),) 788LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) 789endif 790 791# Normally we fill empty space with 0xff 792quiet_cmd_objcopy = OBJCOPY $@ 793cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \ 794 $(OBJCOPYFLAGS_$(@F)) $< $@ 795 796# Provide a version which does not do this, for use by EFI 797quiet_cmd_zobjcopy = OBJCOPY $@ 798cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 799 800quiet_cmd_efipayload = OBJCOPY $@ 801cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@ 802 803quiet_cmd_mkimage = MKIMAGE $@ 804cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 805 $(if $(KBUILD_VERBOSE:1=), >/dev/null) 806 807quiet_cmd_cat = CAT $@ 808cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 809 810append = cat $(filter-out $< $(PHONY), $^) >> $@ 811 812quiet_cmd_pad_cat = CAT $@ 813cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ 814 815all: $(ALL-y) 816ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y) 817 @echo "===================== WARNING ======================" 818 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove" 819 @echo "(possibly in a subsequent patch in your series)" 820 @echo "before sending patches to the mailing list." 821 @echo "====================================================" 822endif 823 @# Check that this build does not use CONFIG options that we do not 824 @# know about unless they are in Kconfig. All the existing CONFIG 825 @# options are whitelisted, so new ones should not be added. 826 $(srctree)/scripts/check-config.sh u-boot.cfg \ 827 $(srctree)/scripts/config_whitelist.txt ${srctree} 1>&2 828 829PHONY += dtbs 830dtbs: dts/dt.dtb 831 @: 832dts/dt.dtb: checkdtc u-boot 833 $(Q)$(MAKE) $(build)=dts dtbs 834 835quiet_cmd_copy = COPY $@ 836 cmd_copy = cp $< $@ 837 838ifeq ($(CONFIG_OF_SEPARATE),y) 839u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE 840 $(call if_changed,cat) 841 842u-boot.bin: u-boot-dtb.bin FORCE 843 $(call if_changed,copy) 844else 845u-boot.bin: u-boot-nodtb.bin FORCE 846 $(call if_changed,copy) 847endif 848 849%.imx: %.bin 850 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 851 852%.vyb: %.imx 853 $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@ 854 855quiet_cmd_copy = COPY $@ 856 cmd_copy = cp $< $@ 857 858u-boot.dtb: dts/dt.dtb 859 $(call cmd,copy) 860 861OBJCOPYFLAGS_u-boot.hex := -O ihex 862 863OBJCOPYFLAGS_u-boot.srec := -O srec 864 865u-boot.hex u-boot.srec: u-boot FORCE 866 $(call if_changed,objcopy) 867 868OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \ 869 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec) 870 871binary_size_check: u-boot-nodtb.bin FORCE 872 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \ 873 map_size=$(shell cat u-boot.map | \ 874 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ 875 | sed 's/0X//g' \ 876 | bc); \ 877 if [ "" != "$$map_size" ]; then \ 878 if test $$map_size -ne $$file_size; then \ 879 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ 880 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \ 881 exit 1; \ 882 fi \ 883 fi 884 885u-boot-nodtb.bin: u-boot FORCE 886 $(call if_changed,objcopy) 887 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) 888 $(BOARD_SIZE_CHECK) 889 890u-boot.ldr: u-boot 891 $(CREATE_LDR_ENV) 892 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) 893 $(BOARD_SIZE_CHECK) 894 895OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex 896 897OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec 898 899u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE 900 $(call if_changed,objcopy) 901 902# 903# U-Boot entry point, needed for booting of full-blown U-Boot 904# from the SPL U-Boot version. 905# 906ifndef CONFIG_SYS_UBOOT_START 907CONFIG_SYS_UBOOT_START := 0 908endif 909 910# Create a file containing the configuration options the image was built with 911quiet_cmd_cpp_cfg = CFG $@ 912cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 913 -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< 914 915ifdef CONFIG_SPL_LOAD_FIT 916MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ 917 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 918 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ 919 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) 920else 921MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ 922 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 923 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" 924endif 925 926MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) 927 928MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 929 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 930 931MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 932 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 933 934MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 935 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage 936 937u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \ 938 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE 939 $(call if_changed,mkimage) 940 941u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE 942 $(call if_changed,mkimage) 943 944u-boot.sha1: u-boot.bin 945 tools/ubsha1 u-boot.bin 946 947u-boot.dis: u-boot 948 $(OBJDUMP) -d $< > $@ 949 950ifdef CONFIG_TPL 951SPL_PAYLOAD := tpl/u-boot-with-tpl.bin 952else 953SPL_PAYLOAD := u-boot.bin 954endif 955 956OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ 957 --pad-to=$(CONFIG_SPL_PAD_TO) 958u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE 959 $(call if_changed,pad_cat) 960 961MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE) 962 963lpc32xx-spl.img: spl/u-boot-spl.bin FORCE 964 $(call if_changed,mkimage) 965 966OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 967 968lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE 969 $(call if_changed,objcopy) 970 971OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 972 973lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE 974 $(call if_changed,objcopy) 975 976lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE 977 $(call if_changed,cat) 978 979CLEAN_FILES += lpc32xx-* 980 981OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ 982 --pad-to=$(CONFIG_TPL_PAD_TO) 983tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE 984 $(call if_changed,pad_cat) 985 986SPL: spl/u-boot-spl.bin FORCE 987 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 988 989u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE 990 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 991 992MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE) 993 994u-boot.ubl: u-boot-with-spl.bin FORCE 995 $(call if_changed,mkimage) 996 997MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ 998 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ 999 -T aisimage -e $(CONFIG_SPL_TEXT_BASE) 1000spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE 1001 $(call if_changed,mkimage) 1002 1003OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 1004u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE 1005 $(call if_changed,pad_cat) 1006 1007u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin 1008 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb 1009u-boot.sb: u-boot.bin spl/u-boot-spl.bin 1010 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb 1011 1012# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. 1013# Both images are created using mkimage (crc etc), so that the ROM 1014# bootloader can check its integrity. Padding needs to be done to the 1015# SPL image (with mkimage header) and not the binary. Otherwise the resulting image 1016# which is loaded/copied by the ROM bootloader to SRAM doesn't fit. 1017# The resulting image containing both U-Boot images is called u-boot.spr 1018MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ 1019 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER 1020spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE 1021 $(call if_changed,mkimage) 1022 1023OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 1024 --gap-fill=0xff 1025u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE 1026 $(call if_changed,pad_cat) 1027 1028ifneq ($(CONFIG_ARCH_SOCFPGA),) 1029quiet_cmd_socboot = SOCBOOT $@ 1030cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ 1031 spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ 1032 u-boot.img > $@ || rm -f $@ 1033u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE 1034 $(call if_changed,socboot) 1035endif 1036 1037# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including 1038# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in 1039# the middle. 1040ifneq ($(CONFIG_X86_RESET_VECTOR),) 1041rom: u-boot.rom FORCE 1042 1043IFDTOOL=$(objtree)/tools/ifdtool 1044IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb 1045IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1) 1046IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin 1047IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin 1048IFDTOOL_FLAGS += -C 1049 1050ifneq ($(CONFIG_HAVE_INTEL_ME),) 1051IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin 1052IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin 1053endif 1054 1055ifneq ($(CONFIG_HAVE_MRC),) 1056IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin 1057endif 1058 1059ifneq ($(CONFIG_HAVE_FSP),) 1060IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE) 1061endif 1062 1063ifneq ($(CONFIG_HAVE_CMC),) 1064IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE) 1065endif 1066 1067ifneq ($(CONFIG_HAVE_VGA_BIOS),) 1068IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE) 1069endif 1070 1071ifneq ($(CONFIG_HAVE_REFCODE),) 1072IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin 1073endif 1074 1075quiet_cmd_ifdtool = IFDTOOL $@ 1076cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp; 1077ifneq ($(CONFIG_HAVE_INTEL_ME),) 1078cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp; 1079endif 1080cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp; 1081cmd_ifdtool += mv u-boot.tmp $@ 1082 1083refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE 1084 $(call if_changed,copy) 1085 1086quiet_cmd_ldr = LD $@ 1087cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \ 1088 $(filter-out FORCE,$^) -o $@ 1089 1090u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \ 1091 $(if $(CONFIG_HAVE_REFCODE),refcode.bin) 1092 $(call if_changed,ifdtool) 1093 1094OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec 1095u-boot-x86-16bit.bin: u-boot FORCE 1096 $(call if_changed,objcopy) 1097endif 1098 1099ifneq ($(CONFIG_SUNXI),) 1100OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ 1101 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff 1102u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE 1103 $(call if_changed,pad_cat) 1104endif 1105 1106ifneq ($(CONFIG_TEGRA),) 1107OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 1108u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE 1109 $(call if_changed,pad_cat) 1110 1111OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 1112u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE 1113 $(call if_changed,pad_cat) 1114 1115u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE 1116 $(call if_changed,copy) 1117endif 1118 1119OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI) 1120u-boot-app.efi: u-boot FORCE 1121 $(call if_changed,zobjcopy) 1122 1123u-boot.bin.o: u-boot.bin FORCE 1124 $(call if_changed,efipayload) 1125 1126u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE 1127 $(call if_changed_dep,cpp_lds) 1128 1129# Rule to link the EFI payload which contains a stub and a U-Boot binary 1130quiet_cmd_u-boot_payload ?= LD $@ 1131 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \ 1132 -T u-boot-payload.lds arch/x86/cpu/call32.o \ 1133 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \ 1134 $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB)) 1135 1136u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE 1137 $(call if_changed,u-boot_payload) 1138 1139OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI) 1140u-boot-payload.efi: u-boot-payload FORCE 1141 $(call if_changed,zobjcopy) 1142 1143u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE 1144 $(call if_changed,cat) 1145 1146#Add a target to create boot binary having SPL binary in PBI format 1147#concatenated with u-boot binary. It is need by PowerPC SoC having 1148#internal SRAM <= 512KB. 1149MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 1150 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ 1151 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) 1152 1153spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE 1154 $(call if_changed,mkimage) 1155 1156ifeq ($(ARCH),arm) 1157UBOOT_BINLOAD := u-boot.img 1158else 1159UBOOT_BINLOAD := u-boot.bin 1160endif 1161 1162OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 1163 --gap-fill=0xff 1164 1165u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE 1166 $(call if_changed,pad_cat) 1167 1168# PPC4xx needs the SPL at the end of the image, since the reset vector 1169# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target 1170# and need to introduce a new build target with the full blown U-Boot 1171# at the start padded up to the start of the SPL image. And then concat 1172# the SPL image to the end. 1173 1174OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \ 1175 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff 1176u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE 1177 $(call if_changed,pad_cat) 1178 1179# Create a new ELF from a raw binary file. This is useful for arm64 1180# where static relocation needs to be performed on the raw binary, 1181# but certain simulators only accept an ELF file (but don't do the 1182# relocation). 1183# FIXME refactor dts/Makefile to share target/arch detection 1184u-boot.elf: u-boot.bin 1185 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \ 1186 $< u-boot-elf.o 1187 @$(LD) u-boot-elf.o -o $@ \ 1188 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \ 1189 -Ttext=$(CONFIG_SYS_TEXT_BASE) 1190 1191# Rule to link u-boot 1192# May be overridden by arch/$(ARCH)/config.mk 1193quiet_cmd_u-boot__ ?= LD $@ 1194 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \ 1195 -T u-boot.lds $(u-boot-init) \ 1196 --start-group $(u-boot-main) --end-group \ 1197 $(PLATFORM_LIBS) -Map u-boot.map 1198 1199quiet_cmd_smap = GEN common/system_map.o 1200cmd_smap = \ 1201 smap=`$(call SYSTEM_MAP,u-boot) | \ 1202 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 1203 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ 1204 -c $(srctree)/common/system_map.c -o common/system_map.o 1205 1206u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE 1207 $(call if_changed,u-boot__) 1208ifeq ($(CONFIG_KALLSYMS),y) 1209 $(call cmd,smap) 1210 $(call cmd,u-boot__) common/system_map.o 1211endif 1212 1213quiet_cmd_sym ?= SYM $@ 1214 cmd_sym ?= $(OBJDUMP) -t $< > $@ 1215u-boot.sym: u-boot FORCE 1216 $(call if_changed,sym) 1217 1218# The actual objects are generated when descending, 1219# make sure no implicit rule kicks in 1220$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; 1221 1222# Handle descending into subdirectories listed in $(vmlinux-dirs) 1223# Preset locale variables to speed up the build process. Limit locale 1224# tweaks to this spot to avoid wrong language settings when running 1225# make menuconfig etc. 1226# Error messages still appears in the original language 1227 1228PHONY += $(u-boot-dirs) 1229$(u-boot-dirs): prepare scripts 1230 $(Q)$(MAKE) $(build)=$@ 1231 1232tools: prepare 1233# The "tools" are needed early 1234$(filter-out tools, $(u-boot-dirs)): tools 1235# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC 1236# is "yes"), so compile examples after U-Boot is compiled. 1237examples: $(filter-out examples, $(u-boot-dirs)) 1238 1239define filechk_uboot.release 1240 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1241endef 1242 1243# Store (new) UBOOTRELEASE string in include/config/uboot.release 1244include/config/uboot.release: include/config/auto.conf FORCE 1245 $(call filechk,uboot.release) 1246 1247 1248# Things we need to do before we recursively start building the kernel 1249# or the modules are listed in "prepare". 1250# A multi level approach is used. prepareN is processed before prepareN-1. 1251# archprepare is used in arch Makefiles and when processed asm symlink, 1252# version.h and scripts_basic is processed / created. 1253 1254# Listed in dependency order 1255PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 1256 1257# prepare3 is used to check if we are building in a separate output directory, 1258# and if so do: 1259# 1) Check that make has not been executed in the kernel src $(srctree) 1260prepare3: include/config/uboot.release 1261ifneq ($(KBUILD_SRC),) 1262 @$(kecho) ' Using $(srctree) as source for U-Boot' 1263 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ 1264 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ 1265 echo >&2 " in the '$(srctree)' directory.";\ 1266 /bin/false; \ 1267 fi; 1268endif 1269 1270# prepare2 creates a makefile if using a separate output directory 1271prepare2: prepare3 outputmakefile 1272 1273prepare1: prepare2 $(version_h) $(timestamp_h) \ 1274 include/config/auto.conf 1275ifeq ($(wildcard $(LDSCRIPT)),) 1276 @echo >&2 " Could not find linker script." 1277 @/bin/false 1278endif 1279 1280archprepare: prepare1 scripts_basic 1281 1282prepare0: archprepare FORCE 1283 $(Q)$(MAKE) $(build)=. 1284 1285# All the preparing.. 1286prepare: prepare0 1287 1288# Generate some files 1289# --------------------------------------------------------------------------- 1290 1291define filechk_version.h 1292 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ 1293 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \ 1294 echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \ 1295 echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; ) 1296endef 1297 1298# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date. 1299# The BSD date on the other hand behaves different and would produce errors 1300# with the misused '-d' switch. Respect that and search a working date with 1301# well known pre- and suffixes for the GNU variant of date. 1302define filechk_timestamp.h 1303 (if test -n "$${SOURCE_DATE_EPOCH}"; then \ 1304 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \ 1305 DATE=""; \ 1306 for date in gdate date.gnu date; do \ 1307 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \ 1308 done; \ 1309 if test -n "$${DATE}"; then \ 1310 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1311 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \ 1312 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \ 1313 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ 1314 else \ 1315 return 42; \ 1316 fi; \ 1317 else \ 1318 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1319 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \ 1320 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \ 1321 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ 1322 fi) 1323endef 1324 1325$(version_h): include/config/uboot.release FORCE 1326 $(call filechk,version.h) 1327 1328$(timestamp_h): $(srctree)/Makefile FORCE 1329 $(call filechk,timestamp.h) 1330 1331# --------------------------------------------------------------------------- 1332quiet_cmd_cpp_lds = LDS $@ 1333cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \ 1334 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 1335 1336u-boot.lds: $(LDSCRIPT) prepare FORCE 1337 $(call if_changed_dep,cpp_lds) 1338 1339spl/u-boot-spl.bin: spl/u-boot-spl 1340 @: 1341spl/u-boot-spl: tools prepare \ 1342 $(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) 1343 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all 1344 1345spl/sunxi-spl.bin: spl/u-boot-spl 1346 @: 1347 1348spl/u-boot-spl.sfp: spl/u-boot-spl 1349 @: 1350 1351spl/boot.bin: spl/u-boot-spl 1352 @: 1353 1354tpl/u-boot-tpl.bin: tools prepare 1355 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all 1356 1357TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) 1358 1359FIND := find 1360FINDFLAGS := -L 1361 1362tags ctags: 1363 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1364 -name '*.[chS]' -print` 1365 ln -s ctags tags 1366 1367etags: 1368 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1369 -name '*.[chS]' -print` 1370cscope: 1371 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ 1372 cscope.files 1373 cscope -b -q -k 1374 1375SYSTEM_MAP = \ 1376 $(NM) $1 | \ 1377 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 1378 LC_ALL=C sort 1379System.map: u-boot 1380 @$(call SYSTEM_MAP,$<) > $@ 1381 1382checkdtc: 1383 @if test $(call dtc-version) -lt 0104; then \ 1384 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ 1385 false; \ 1386 fi 1387 1388######################################################################### 1389 1390# ARM relocations should all be R_ARM_RELATIVE (32-bit) or 1391# R_AARCH64_RELATIVE (64-bit). 1392checkarmreloc: u-boot 1393 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ 1394 grep R_A | sort -u`"; \ 1395 if test "$$RELOC" != "R_ARM_RELATIVE" -a \ 1396 "$$RELOC" != "R_AARCH64_RELATIVE"; then \ 1397 echo "$< contains unexpected relocations: $$RELOC"; \ 1398 false; \ 1399 fi 1400 1401env: scripts_basic 1402 $(Q)$(MAKE) $(build)=tools/$@ 1403 1404tools-only: scripts_basic $(version_h) $(timestamp_h) 1405 $(Q)$(MAKE) $(build)=tools 1406 1407tools-all: export HOST_TOOLS_ALL=y 1408tools-all: env tools ; 1409 1410cross_tools: export CROSS_BUILD_TOOLS=y 1411cross_tools: tools ; 1412 1413.PHONY : CHANGELOG 1414CHANGELOG: 1415 git log --no-merges U-Boot-1_1_5.. | \ 1416 unexpand -a | sed -e 's/\s\s*$$//' > $@ 1417 1418######################################################################### 1419 1420### 1421# Cleaning is done on three levels. 1422# make clean Delete most generated files 1423# Leave enough to build external modules 1424# make mrproper Delete the current configuration, and all generated files 1425# make distclean Remove editor backup files, patch leftover files and the like 1426 1427# Directories & files removed with 'make clean' 1428CLEAN_DIRS += $(MODVERDIR) \ 1429 $(foreach d, spl tpl, $(patsubst %,$d/%, \ 1430 $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) 1431 1432CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \ 1433 boot* u-boot* MLO* SPL System.map 1434 1435# Directories & files removed with 'make mrproper' 1436MRPROPER_DIRS += include/config include/generated spl tpl \ 1437 .tmp_objdiff 1438MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ 1439 ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS 1440 1441# clean - Delete most, but leave enough to build external modules 1442# 1443clean: rm-dirs := $(CLEAN_DIRS) 1444clean: rm-files := $(CLEAN_FILES) 1445 1446clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f)) 1447 1448clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook) 1449 1450PHONY += $(clean-dirs) clean archclean 1451$(clean-dirs): 1452 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1453 1454# TODO: Do not use *.cfgtmp 1455clean: $(clean-dirs) 1456 $(call cmd,rmdirs) 1457 $(call cmd,rmfiles) 1458 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1459 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1460 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \ 1461 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1462 -o -name '*.symtypes' -o -name 'modules.order' \ 1463 -o -name modules.builtin -o -name '.tmp_*.o.*' \ 1464 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \ 1465 -o -name '*.gcno' \) -type f -print | xargs rm -f 1466 1467# mrproper - Delete all generated files, including .config 1468# 1469mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) 1470mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1471mrproper-dirs := $(addprefix _mrproper_,scripts) 1472 1473PHONY += $(mrproper-dirs) mrproper archmrproper 1474$(mrproper-dirs): 1475 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1476 1477mrproper: clean $(mrproper-dirs) 1478 $(call cmd,rmdirs) 1479 $(call cmd,rmfiles) 1480 @rm -f arch/*/include/asm/arch 1481 1482# distclean 1483# 1484PHONY += distclean 1485 1486distclean: mrproper 1487 @find $(srctree) $(RCS_FIND_IGNORE) \ 1488 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1489 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ 1490 -o -name '.*.rej' -o -name '*%' -o -name 'core' \ 1491 -o -name '*.pyc' \) \ 1492 -type f -print | xargs rm -f 1493 @rm -f boards.cfg 1494 1495backup: 1496 F=`basename $(srctree)` ; cd .. ; \ 1497 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 1498 1499help: 1500 @echo 'Cleaning targets:' 1501 @echo ' clean - Remove most generated files but keep the config' 1502 @echo ' mrproper - Remove all generated files + config + various backup files' 1503 @echo ' distclean - mrproper + remove editor backup and patch files' 1504 @echo '' 1505 @echo 'Configuration targets:' 1506 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1507 @echo '' 1508 @echo 'Other generic targets:' 1509 @echo ' all - Build all necessary images depending on configuration' 1510 @echo ' tests - Build U-Boot for sandbox and run tests' 1511 @echo '* u-boot - Build the bare u-boot' 1512 @echo ' dir/ - Build all files in dir and below' 1513 @echo ' dir/file.[oisS] - Build specified target only' 1514 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1515 @echo ' (requires a recent binutils and recent build (System.map))' 1516 @echo ' tags/ctags - Generate ctags file for editors' 1517 @echo ' etags - Generate etags file for editors' 1518 @echo ' cscope - Generate cscope index' 1519 @echo ' ubootrelease - Output the release version string (use with make -s)' 1520 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' 1521 @echo '' 1522 @echo 'Static analysers' 1523 @echo ' checkstack - Generate a list of stack hogs' 1524 @echo '' 1525 @echo 'Documentation targets:' 1526 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp 1527 @echo '' 1528 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1529 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1530 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1531 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' 1532 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1533 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1534 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' 1535 @echo ' 1: warnings which may be relevant and do not occur too often' 1536 @echo ' 2: warnings which occur quite often but may still be relevant' 1537 @echo ' 3: more obscure warnings, can most likely be ignored' 1538 @echo ' Multiple levels can be combined with W=12 or W=123' 1539 @echo '' 1540 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1541 @echo 'For further info see the ./README file' 1542 1543tests: 1544 $(srctree)/test/run 1545 1546# Documentation targets 1547# --------------------------------------------------------------------------- 1548%docs: scripts_basic FORCE 1549 $(Q)$(MAKE) $(build)=scripts build_docproc 1550 $(Q)$(MAKE) $(build)=doc/DocBook $@ 1551 1552# Dummies... 1553PHONY += prepare scripts 1554prepare: ; 1555scripts: ; 1556 1557endif #ifeq ($(config-targets),1) 1558endif #ifeq ($(mixed-targets),1) 1559 1560PHONY += checkstack ubootrelease ubootversion 1561 1562checkstack: 1563 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ 1564 $(PERL) $(src)/scripts/checkstack.pl $(ARCH) 1565 1566ubootrelease: 1567 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1568 1569ubootversion: 1570 @echo $(UBOOTVERSION) 1571 1572# Single targets 1573# --------------------------------------------------------------------------- 1574# Single targets are compatible with: 1575# - build with mixed source and output 1576# - build with separate output dir 'make O=...' 1577# - external modules 1578# 1579# target-dir => where to store outputfile 1580# build-dir => directory in kernel source tree to use 1581 1582ifeq ($(KBUILD_EXTMOD),) 1583 build-dir = $(patsubst %/,%,$(dir $@)) 1584 target-dir = $(dir $@) 1585else 1586 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) 1587 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) 1588 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) 1589endif 1590 1591%.s: %.c prepare scripts FORCE 1592 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1593%.i: %.c prepare scripts FORCE 1594 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1595%.o: %.c prepare scripts FORCE 1596 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1597%.lst: %.c prepare scripts FORCE 1598 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1599%.s: %.S prepare scripts FORCE 1600 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1601%.o: %.S prepare scripts FORCE 1602 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1603%.symtypes: %.c prepare scripts FORCE 1604 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1605 1606# Modules 1607/: prepare scripts FORCE 1608 $(cmd_crmodverdir) 1609 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1610 $(build)=$(build-dir) 1611%/: prepare scripts FORCE 1612 $(cmd_crmodverdir) 1613 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1614 $(build)=$(build-dir) 1615%.ko: prepare scripts FORCE 1616 $(cmd_crmodverdir) 1617 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1618 $(build)=$(build-dir) $(@:.ko=.o) 1619 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1620 1621# FIXME Should go into a make.lib or something 1622# =========================================================================== 1623 1624quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) 1625 cmd_rmdirs = rm -rf $(rm-dirs) 1626 1627quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1628 cmd_rmfiles = rm -f $(rm-files) 1629 1630# read all saved command lines 1631 1632targets := $(wildcard $(sort $(targets))) 1633cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 1634 1635ifneq ($(cmd_files),) 1636 $(cmd_files): ; # Do not try to update included dependency files 1637 include $(cmd_files) 1638endif 1639 1640endif # skip-makefile 1641 1642PHONY += FORCE 1643FORCE: 1644 1645# Declare the contents of the .PHONY variable as phony. We keep that 1646# information in a variable so we can use it in if_changed and friends. 1647.PHONY: $(PHONY) 1648