1VERSION = 2015 2PATCHLEVEL = 04 3SUBLEVEL = 4EXTRAVERSION = -rc2 5NAME = 6 7# *DOCUMENTATION* 8# To see a list of typical targets execute "make help" 9# More info can be located in ./README 10# Comments in this file are targeted only to the developer, do not 11# expect to learn how to build the kernel reading this file. 12 13# Do not use make's built-in rules and variables 14# (this increases performance and avoids hard-to-debug behaviour); 15MAKEFLAGS += -rR 16 17# Avoid funny character set dependencies 18unexport LC_ALL 19LC_COLLATE=C 20LC_NUMERIC=C 21export LC_COLLATE LC_NUMERIC 22 23# Avoid interference with shell env settings 24unexport GREP_OPTIONS 25 26# We are using a recursive build, so we need to do a little thinking 27# to get the ordering right. 28# 29# Most importantly: sub-Makefiles should only ever modify files in 30# their own directory. If in some directory we have a dependency on 31# a file in another dir (which doesn't happen often, but it's often 32# unavoidable when linking the built-in.o targets which finally 33# turn into vmlinux), we will call a sub make in that other dir, and 34# after that we are sure that everything which is in that other dir 35# is now up to date. 36# 37# The only cases where we need to modify files which have global 38# effects are thus separated out and done before the recursive 39# descending is started. They are now explicitly listed as the 40# prepare rule. 41 42# Beautify output 43# --------------------------------------------------------------------------- 44# 45# Normally, we echo the whole command before executing it. By making 46# that echo $($(quiet)$(cmd)), we now have the possibility to set 47# $(quiet) to choose other forms of output instead, e.g. 48# 49# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 50# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 51# 52# If $(quiet) is empty, the whole command will be printed. 53# If it is set to "quiet_", only the short version will be printed. 54# If it is set to "silent_", nothing will be printed at all, since 55# the variable $(silent_cmd_cc_o_c) doesn't exist. 56# 57# A simple variant is to prefix commands with $(Q) - that's useful 58# for commands that shall be hidden in non-verbose mode. 59# 60# $(Q)ln $@ :< 61# 62# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 63# If KBUILD_VERBOSE equals 1 then the above command is displayed. 64# 65# To put more focus on warnings, be less verbose as default 66# Use 'make V=1' to see the full commands 67 68ifeq ("$(origin V)", "command line") 69 KBUILD_VERBOSE = $(V) 70endif 71ifndef KBUILD_VERBOSE 72 KBUILD_VERBOSE = 0 73endif 74 75ifeq ($(KBUILD_VERBOSE),1) 76 quiet = 77 Q = 78else 79 quiet=quiet_ 80 Q = @ 81endif 82 83# If the user is running make -s (silent mode), suppress echoing of 84# commands 85 86ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 87ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) 88 quiet=silent_ 89endif 90else # make-3.8x 91ifneq ($(filter s% -s%,$(MAKEFLAGS)),) 92 quiet=silent_ 93endif 94endif 95 96export quiet Q KBUILD_VERBOSE 97 98# kbuild supports saving output files in a separate directory. 99# To locate output files in a separate directory two syntaxes are supported. 100# In both cases the working directory must be the root of the kernel src. 101# 1) O= 102# Use "make O=dir/to/store/output/files/" 103# 104# 2) Set KBUILD_OUTPUT 105# Set the environment variable KBUILD_OUTPUT to point to the directory 106# where the output files shall be placed. 107# export KBUILD_OUTPUT=dir/to/store/output/files/ 108# make 109# 110# The O= assignment takes precedence over the KBUILD_OUTPUT environment 111# variable. 112 113# KBUILD_SRC is set on invocation of make in OBJ directory 114# KBUILD_SRC is not intended to be used by the regular user (for now) 115ifeq ($(KBUILD_SRC),) 116 117# OK, Make called in directory where kernel src resides 118# Do we want to locate output files in a separate directory? 119ifeq ("$(origin O)", "command line") 120 KBUILD_OUTPUT := $(O) 121endif 122 123# That's our default target when none is given on the command line 124PHONY := _all 125_all: 126 127# Cancel implicit rules on top Makefile 128$(CURDIR)/Makefile Makefile: ; 129 130ifneq ($(KBUILD_OUTPUT),) 131# Invoke a second make in the output directory, passing relevant variables 132# check that the output directory actually exists 133saved-output := $(KBUILD_OUTPUT) 134KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ 135 && /bin/pwd) 136$(if $(KBUILD_OUTPUT),, \ 137 $(error failed to create output directory "$(saved-output)")) 138 139PHONY += $(MAKECMDGOALS) sub-make 140 141$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make 142 @: 143 144sub-make: FORCE 145 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ 146 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) 147 148# Leave processing to above invocation of make 149skip-makefile := 1 150endif # ifneq ($(KBUILD_OUTPUT),) 151endif # ifeq ($(KBUILD_SRC),) 152 153# We process the rest of the Makefile if this is the final invocation of make 154ifeq ($(skip-makefile),) 155 156# Do not print "Entering directory ...", 157# but we want to display it when entering to the output directory 158# so that IDEs/editors are able to understand relative filenames. 159MAKEFLAGS += --no-print-directory 160 161# Call a source code checker (by default, "sparse") as part of the 162# C compilation. 163# 164# Use 'make C=1' to enable checking of only re-compiled files. 165# Use 'make C=2' to enable checking of *all* source files, regardless 166# of whether they are re-compiled or not. 167# 168# See the file "Documentation/sparse.txt" for more details, including 169# where to get the "sparse" utility. 170 171ifeq ("$(origin C)", "command line") 172 KBUILD_CHECKSRC = $(C) 173endif 174ifndef KBUILD_CHECKSRC 175 KBUILD_CHECKSRC = 0 176endif 177 178# Use make M=dir to specify directory of external module to build 179# Old syntax make ... SUBDIRS=$PWD is still supported 180# Setting the environment variable KBUILD_EXTMOD take precedence 181ifdef SUBDIRS 182 KBUILD_EXTMOD ?= $(SUBDIRS) 183endif 184 185ifeq ("$(origin M)", "command line") 186 KBUILD_EXTMOD := $(M) 187endif 188 189# If building an external module we do not care about the all: rule 190# but instead _all depend on modules 191PHONY += all 192ifeq ($(KBUILD_EXTMOD),) 193_all: all 194else 195_all: modules 196endif 197 198ifeq ($(KBUILD_SRC),) 199 # building in the source tree 200 srctree := . 201else 202 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) 203 # building in a subdirectory of the source tree 204 srctree := .. 205 else 206 srctree := $(KBUILD_SRC) 207 endif 208endif 209objtree := . 210src := $(srctree) 211obj := $(objtree) 212 213VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 214 215export srctree objtree VPATH 216 217# Make sure CDPATH settings don't interfere 218unexport CDPATH 219 220######################################################################### 221 222HOSTARCH := $(shell uname -m | \ 223 sed -e s/i.86/x86/ \ 224 -e s/sun4u/sparc64/ \ 225 -e s/arm.*/arm/ \ 226 -e s/sa110/arm/ \ 227 -e s/ppc64/powerpc/ \ 228 -e s/ppc/powerpc/ \ 229 -e s/macppc/powerpc/\ 230 -e s/sh.*/sh/) 231 232HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 233 sed -e 's/\(cygwin\).*/cygwin/') 234 235export HOSTARCH HOSTOS 236 237######################################################################### 238 239# set default to nothing for native builds 240ifeq ($(HOSTARCH),$(ARCH)) 241CROSS_COMPILE ?= 242endif 243 244KCONFIG_CONFIG ?= .config 245export KCONFIG_CONFIG 246 247# SHELL used by kbuild 248CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 249 else if [ -x /bin/bash ]; then echo /bin/bash; \ 250 else echo sh; fi ; fi) 251 252HOSTCC = cc 253HOSTCXX = c++ 254HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer 255HOSTCXXFLAGS = -O2 256 257ifeq ($(HOSTOS),cygwin) 258HOSTCFLAGS += -ansi 259endif 260 261# Mac OS X / Darwin's C preprocessor is Apple specific. It 262# generates numerous errors and warnings. We want to bypass it 263# and use GNU C's cpp. To do this we pass the -traditional-cpp 264# option to the compiler. Note that the -traditional-cpp flag 265# DOES NOT have the same semantics as GNU C's flag, all it does 266# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. 267# 268# Apple's linker is similar, thanks to the new 2 stage linking 269# multiple symbol definitions are treated as errors, hence the 270# -multiply_defined suppress option to turn off this error. 271# 272ifeq ($(HOSTOS),darwin) 273# get major and minor product version (e.g. '10' and '6' for Snow Leopard) 274DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') 275DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') 276 277os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ 278 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) 279 280# Snow Leopards build environment has no longer restrictions as described above 281HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") 282HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") 283HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") 284 285# since Lion (10.7) ASLR is on by default, but we use linker generated lists 286# in some host tools which is a problem then ... so disable ASLR for these 287# tools 288HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie") 289endif 290 291# Decide whether to build built-in, modular, or both. 292# Normally, just do built-in. 293 294KBUILD_MODULES := 295KBUILD_BUILTIN := 1 296 297# If we have only "make modules", don't compile built-in objects. 298# When we're building modules with modversions, we need to consider 299# the built-in objects during the descend as well, in order to 300# make sure the checksums are up to date before we record them. 301 302ifeq ($(MAKECMDGOALS),modules) 303 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 304endif 305 306# If we have "make <whatever> modules", compile modules 307# in addition to whatever we do anyway. 308# Just "make" or "make all" shall build modules as well 309 310# U-Boot does not need modules 311#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 312# KBUILD_MODULES := 1 313#endif 314 315#ifeq ($(MAKECMDGOALS),) 316# KBUILD_MODULES := 1 317#endif 318 319export KBUILD_MODULES KBUILD_BUILTIN 320export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 321 322# Look for make include files relative to root of kernel src 323MAKEFLAGS += --include-dir=$(srctree) 324 325# We need some generic definitions (do not try to remake the file). 326$(srctree)/scripts/Kbuild.include: ; 327include $(srctree)/scripts/Kbuild.include 328 329# Make variables (CC, etc...) 330 331AS = $(CROSS_COMPILE)as 332# Always use GNU ld 333ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) 334LD = $(CROSS_COMPILE)ld.bfd 335else 336LD = $(CROSS_COMPILE)ld 337endif 338CC = $(CROSS_COMPILE)gcc 339CPP = $(CC) -E 340AR = $(CROSS_COMPILE)ar 341NM = $(CROSS_COMPILE)nm 342LDR = $(CROSS_COMPILE)ldr 343STRIP = $(CROSS_COMPILE)strip 344OBJCOPY = $(CROSS_COMPILE)objcopy 345OBJDUMP = $(CROSS_COMPILE)objdump 346AWK = awk 347PERL = perl 348PYTHON = python 349DTC = dtc 350CHECK = sparse 351 352CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 353 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) 354 355KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ 356 357KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ 358 -Wno-format-security \ 359 -fno-builtin -ffreestanding 360KBUILD_AFLAGS := -D__ASSEMBLY__ 361 362# Read UBOOTRELEASE from include/config/uboot.release (if it exists) 363UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) 364UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 365 366export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION 367export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR 368export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC 369export CPP AR NM LDR STRIP OBJCOPY OBJDUMP 370export MAKE AWK PERL PYTHON 371export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS 372 373export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS 374export KBUILD_CFLAGS KBUILD_AFLAGS 375 376# When compiling out-of-tree modules, put MODVERDIR in the module 377# tree rather than in the kernel tree. The kernel tree might 378# even be read-only. 379export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 380 381# Files to ignore in find ... statements 382 383export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 384 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 385 -prune -o 386export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 387 --exclude CVS --exclude .pc --exclude .hg --exclude .git 388 389# =========================================================================== 390# Rules shared between *config targets and build targets 391 392# Basic helpers built in scripts/ 393PHONY += scripts_basic 394scripts_basic: 395 $(Q)$(MAKE) $(build)=scripts/basic 396 $(Q)rm -f .tmp_quiet_recordmcount 397 398# To avoid any implicit rule to kick in, define an empty command. 399scripts/basic/%: scripts_basic ; 400 401PHONY += outputmakefile 402# outputmakefile generates a Makefile in the output directory, if using a 403# separate output directory. This allows convenient use of make in the 404# output directory. 405outputmakefile: 406ifneq ($(KBUILD_SRC),) 407 $(Q)ln -fsn $(srctree) source 408 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ 409 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) 410endif 411 412# To make sure we do not include .config for any of the *config targets 413# catch them early, and hand them over to scripts/kconfig/Makefile 414# It is allowed to specify more targets when calling make, including 415# mixing *config targets and build targets. 416# For example 'make oldconfig all'. 417# Detect when mixed targets is specified, and make a second invocation 418# of make so .config is not included in this case either (for *config). 419 420version_h := include/generated/version_autogenerated.h 421timestamp_h := include/generated/timestamp_autogenerated.h 422 423no-dot-config-targets := clean clobber mrproper distclean \ 424 help %docs check% coccicheck \ 425 ubootversion backup 426 427config-targets := 0 428mixed-targets := 0 429dot-config := 1 430 431ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 432 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 433 dot-config := 0 434 endif 435endif 436 437ifeq ($(KBUILD_EXTMOD),) 438 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 439 config-targets := 1 440 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) 441 mixed-targets := 1 442 endif 443 endif 444endif 445 446ifeq ($(mixed-targets),1) 447# =========================================================================== 448# We're called with mixed targets (*config and build targets). 449# Handle them one by one. 450 451PHONY += $(MAKECMDGOALS) __build_one_by_one 452 453$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one 454 @: 455 456__build_one_by_one: 457 $(Q)set -e; \ 458 for i in $(MAKECMDGOALS); do \ 459 $(MAKE) -f $(srctree)/Makefile $$i; \ 460 done 461 462else 463ifeq ($(config-targets),1) 464# =========================================================================== 465# *config targets only - make sure prerequisites are updated, and descend 466# in scripts/kconfig to make the *config target 467 468KBUILD_DEFCONFIG := sandbox_defconfig 469export KBUILD_DEFCONFIG KBUILD_KCONFIG 470 471config: scripts_basic outputmakefile FORCE 472 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ 473 474%config: scripts_basic outputmakefile FORCE 475 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ 476 477else 478# =========================================================================== 479# Build targets only - this includes vmlinux, arch specific targets, clean 480# targets and others. In general all targets except *config targets. 481 482ifeq ($(dot-config),1) 483# Read in config 484-include include/config/auto.conf 485 486# Read in dependencies to all Kconfig* files, make sure to run 487# oldconfig if changes are detected. 488-include include/config/auto.conf.cmd 489 490# To avoid any implicit rule to kick in, define an empty command 491$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; 492 493# If .config is newer than include/config/auto.conf, someone tinkered 494# with it and forgot to run make oldconfig. 495# if auto.conf.cmd is missing then we are probably in a cleaned tree so 496# we execute the config step to be sure to catch updated Kconfig files 497include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd 498 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig 499 500-include include/autoconf.mk 501-include include/autoconf.mk.dep 502 503# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf 504# is up-to-date. When we switch to a different board configuration, old CONFIG 505# macros are still remaining in include/config/auto.conf. Without the following 506# gimmick, wrong config.mk would be included leading nasty warnings/errors. 507autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \ 508 -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG))) 509ifneq ($(autoconf_is_current),) 510include $(srctree)/config.mk 511include $(srctree)/arch/$(ARCH)/Makefile 512endif 513 514# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use 515# that (or fail if absent). Otherwise, search for a linker script in a 516# standard location. 517 518ifndef LDSCRIPT 519 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug 520 ifdef CONFIG_SYS_LDSCRIPT 521 # need to strip off double quotes 522 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%) 523 endif 524endif 525 526# If there is no specified link script, we look in a number of places for it 527ifndef LDSCRIPT 528 ifeq ($(wildcard $(LDSCRIPT)),) 529 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds 530 endif 531 ifeq ($(wildcard $(LDSCRIPT)),) 532 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds 533 endif 534 ifeq ($(wildcard $(LDSCRIPT)),) 535 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds 536 endif 537endif 538 539else 540# Dummy target needed, because used as prerequisite 541include/config/auto.conf: ; 542endif # $(dot-config) 543 544ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 545KBUILD_CFLAGS += -Os 546else 547KBUILD_CFLAGS += -O2 548endif 549 550ifdef BUILD_TAG 551KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' 552endif 553 554KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) 555 556KBUILD_CFLAGS += -g 557# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> 558# option to the assembler. 559KBUILD_AFLAGS += -g 560 561# Report stack usage if supported 562ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y) 563 KBUILD_CFLAGS += -fstack-usage 564endif 565 566KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) 567 568# turn jbsr into jsr for m68k 569ifeq ($(ARCH),m68k) 570ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) 571KBUILD_AFLAGS += -Wa,-gstabs,-S 572endif 573endif 574 575# Prohibit date/time macros, which would make the build non-deterministic 576KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) 577 578ifneq ($(CONFIG_SYS_TEXT_BASE),) 579KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) 580endif 581 582export CONFIG_SYS_TEXT_BASE 583 584include $(srctree)/scripts/Makefile.extrawarn 585 586# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 587KBUILD_CPPFLAGS += $(KCPPFLAGS) 588KBUILD_AFLAGS += $(KAFLAGS) 589KBUILD_CFLAGS += $(KCFLAGS) 590 591# Use UBOOTINCLUDE when you must reference the include/ directory. 592# Needed to be compatible with the O= option 593UBOOTINCLUDE := \ 594 -Iinclude \ 595 $(if $(KBUILD_SRC), -I$(srctree)/include) \ 596 -I$(srctree)/arch/$(ARCH)/include \ 597 -include $(srctree)/include/linux/kconfig.h 598 599NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 600CHECKFLAGS += $(NOSTDINC_FLAGS) 601 602# FIX ME 603cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 604 $(NOSTDINC_FLAGS) 605c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 606 607######################################################################### 608# U-Boot objects....order is important (i.e. start must be first) 609 610HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 611 612libs-y += lib/ 613libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 614libs-$(CONFIG_OF_EMBED) += dts/ 615libs-y += fs/ 616libs-y += net/ 617libs-y += disk/ 618libs-y += drivers/ 619libs-y += drivers/dma/ 620libs-y += drivers/gpio/ 621libs-y += drivers/i2c/ 622libs-y += drivers/mmc/ 623libs-y += drivers/mtd/ 624libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ 625libs-y += drivers/mtd/onenand/ 626libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ 627libs-y += drivers/mtd/spi/ 628libs-y += drivers/net/ 629libs-y += drivers/net/phy/ 630libs-y += drivers/pci/ 631libs-y += drivers/power/ \ 632 drivers/power/fuel_gauge/ \ 633 drivers/power/mfd/ \ 634 drivers/power/pmic/ \ 635 drivers/power/battery/ 636libs-y += drivers/spi/ 637libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ 638libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ 639libs-y += drivers/serial/ 640libs-y += drivers/usb/eth/ 641libs-y += drivers/usb/gadget/ 642libs-y += drivers/usb/host/ 643libs-y += drivers/usb/musb/ 644libs-y += drivers/usb/musb-new/ 645libs-y += drivers/usb/phy/ 646libs-y += drivers/usb/ulpi/ 647libs-y += common/ 648libs-$(CONFIG_API) += api/ 649libs-$(CONFIG_HAS_POST) += post/ 650libs-y += test/ 651libs-y += test/dm/ 652 653libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 654 655libs-y := $(sort $(libs-y)) 656 657u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples 658 659u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-)))) 660 661libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 662 663u-boot-init := $(head-y) 664u-boot-main := $(libs-y) 665 666 667# Add GCC lib 668ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 669PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 670else 671PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc 672endif 673PLATFORM_LIBS += $(PLATFORM_LIBGCC) 674export PLATFORM_LIBS 675export PLATFORM_LIBGCC 676 677# Special flags for CPP when processing the linker script. 678# Pass the version down so we can handle backwards compatibility 679# on the fly. 680LDPPFLAGS += \ 681 -include $(srctree)/include/u-boot/u-boot.lds.h \ 682 -DCPUDIR=$(CPUDIR) \ 683 $(shell $(LD) --version | \ 684 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 685 686######################################################################### 687######################################################################### 688 689ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) 690BOARD_SIZE_CHECK = \ 691 @actual=`wc -c $@ | awk '{print $$1}'`; \ 692 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ 693 if test $$actual -gt $$limit; then \ 694 echo "$@ exceeds file size limit:" >&2 ; \ 695 echo " limit: $$limit bytes" >&2 ; \ 696 echo " actual: $$actual bytes" >&2 ; \ 697 echo " excess: $$((actual - limit)) bytes" >&2; \ 698 exit 1; \ 699 fi 700else 701BOARD_SIZE_CHECK = 702endif 703 704# Statically apply RELA-style relocations (currently arm64 only) 705ifneq ($(CONFIG_STATIC_RELA),) 706# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base 707DO_STATIC_RELA = \ 708 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ 709 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ 710 tools/relocate-rela $(2) $(3) $$start $$end 711else 712DO_STATIC_RELA = 713endif 714 715# Always append ALL so that arch config.mk's can add custom ones 716ALL-y += u-boot.srec u-boot.bin System.map binary_size_check 717 718ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin 719ifeq ($(CONFIG_SPL_FSL_PBL),y) 720ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin 721else 722ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl 723endif 724ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin 725ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img 726ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin 727ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin 728ifeq ($(CONFIG_SPL_FRAMEWORK),y) 729ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img 730endif 731ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb 732ifneq ($(CONFIG_SPL_TARGET),) 733ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) 734endif 735ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf 736 737ifneq ($(BUILD_ROM),) 738ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom 739endif 740 741# enable combined SPL/u-boot/dtb rules for tegra 742ifneq ($(CONFIG_TEGRA),) 743ifeq ($(CONFIG_SPL),y) 744ifeq ($(CONFIG_OF_SEPARATE),y) 745ALL-y += u-boot-dtb-tegra.bin 746else 747ALL-y += u-boot-nodtb-tegra.bin 748endif 749endif 750endif 751 752# Add optional build target if defined in board/cpu/soc headers 753ifneq ($(CONFIG_BUILD_TARGET),) 754ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) 755endif 756 757LDFLAGS_u-boot += $(LDFLAGS_FINAL) 758ifneq ($(CONFIG_SYS_TEXT_BASE),) 759LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) 760endif 761 762quiet_cmd_objcopy = OBJCOPY $@ 763cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 764 765quiet_cmd_mkimage = MKIMAGE $@ 766cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 767 $(if $(KBUILD_VERBOSE:1=), >/dev/null) 768 769quiet_cmd_cat = CAT $@ 770cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 771 772append = cat $(filter-out $< $(PHONY), $^) >> $@ 773 774quiet_cmd_pad_cat = CAT $@ 775cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ 776 777all: $(ALL-y) 778ifneq ($(CONFIG_SYS_GENERIC_BOARD),y) 779 @echo "===================== WARNING ======================" 780 @echo "Please convert this board to generic board." 781 @echo "Otherwise it will be removed by the end of 2014." 782 @echo "See doc/README.generic-board for further information" 783 @echo "====================================================" 784endif 785ifeq ($(CONFIG_DM_I2C_COMPAT),y) 786 @echo "===================== WARNING ======================" 787 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove" 788 @echo "(possibly in a subsequent patch in your series)" 789 @echo "before sending patches to the mailing list." 790 @echo "====================================================" 791endif 792 793PHONY += dtbs 794dtbs dts/dt.dtb: checkdtc u-boot 795 $(Q)$(MAKE) $(build)=dts dtbs 796 797u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE 798 $(call if_changed,cat) 799 800%.imx: %.bin 801 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 802 803quiet_cmd_copy = COPY $@ 804 cmd_copy = cp $< $@ 805 806u-boot.dtb: dts/dt.dtb 807 $(call cmd,copy) 808 809OBJCOPYFLAGS_u-boot.hex := -O ihex 810 811OBJCOPYFLAGS_u-boot.srec := -O srec 812 813u-boot.hex u-boot.srec: u-boot FORCE 814 $(call if_changed,objcopy) 815 816OBJCOPYFLAGS_u-boot.bin := -O binary \ 817 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec) 818 819binary_size_check: u-boot.bin FORCE 820 @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \ 821 map_size=$(shell cat u-boot.map | \ 822 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ 823 | sed 's/0X//g' \ 824 | bc); \ 825 if [ "" != "$$map_size" ]; then \ 826 if test $$map_size -ne $$file_size; then \ 827 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ 828 echo " but u-boot.bin shows $$file_size" >&2 ; \ 829 exit 1; \ 830 fi \ 831 fi 832 833u-boot.bin: u-boot FORCE 834 $(call if_changed,objcopy) 835 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) 836 $(BOARD_SIZE_CHECK) 837 838u-boot.ldr: u-boot 839 $(CREATE_LDR_ENV) 840 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) 841 $(BOARD_SIZE_CHECK) 842 843OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex 844 845OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec 846 847u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE 848 $(call if_changed,objcopy) 849 850# 851# U-Boot entry point, needed for booting of full-blown U-Boot 852# from the SPL U-Boot version. 853# 854ifndef CONFIG_SYS_UBOOT_START 855CONFIG_SYS_UBOOT_START := 0 856endif 857 858MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ 859 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 860 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" 861 862MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 863 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 864 865MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 866 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 867 868MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 869 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage 870 871u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE 872 $(call if_changed,mkimage) 873 874u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE 875 $(call if_changed,mkimage) 876 877MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) 878 879u-boot-dtb.img: u-boot-dtb.bin FORCE 880 $(call if_changed,mkimage) 881 882u-boot.sha1: u-boot.bin 883 tools/ubsha1 u-boot.bin 884 885u-boot.dis: u-boot 886 $(OBJDUMP) -d $< > $@ 887 888ifdef CONFIG_TPL 889SPL_PAYLOAD := tpl/u-boot-with-tpl.bin 890else 891SPL_PAYLOAD := u-boot.bin 892endif 893 894OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ 895 --pad-to=$(CONFIG_SPL_PAD_TO) 896u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE 897 $(call if_changed,pad_cat) 898 899OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ 900 --pad-to=$(CONFIG_TPL_PAD_TO) 901tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE 902 $(call if_changed,pad_cat) 903 904SPL: spl/u-boot-spl.bin FORCE 905 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 906 907u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE 908 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 909 910MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE) 911 912u-boot.ubl: u-boot-with-spl.bin FORCE 913 $(call if_changed,mkimage) 914 915MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ 916 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ 917 -T aisimage -e $(CONFIG_SPL_TEXT_BASE) 918spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE 919 $(call if_changed,mkimage) 920 921OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 922u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE 923 $(call if_changed,pad_cat) 924 925u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin 926 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb 927u-boot.sb: u-boot.bin spl/u-boot-spl.bin 928 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb 929 930# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. 931# Both images are created using mkimage (crc etc), so that the ROM 932# bootloader can check its integrity. Padding needs to be done to the 933# SPL image (with mkimage header) and not the binary. Otherwise the resulting image 934# which is loaded/copied by the ROM bootloader to SRAM doesn't fit. 935# The resulting image containing both U-Boot images is called u-boot.spr 936MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ 937 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER 938spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE 939 $(call if_changed,mkimage) 940 941OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 942 --gap-fill=0xff 943u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE 944 $(call if_changed,pad_cat) 945 946MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \ 947 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL 948spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE 949 $(call if_changed,mkimage) 950 951OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 952 --gap-fill=0 953u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE 954 $(call if_changed,pad_cat) 955 956MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ 957 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot 958u-boot-nand.gph: u-boot.bin FORCE 959 $(call if_changed,mkimage) 960 @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ 961 962# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including 963# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in 964# the middle. 965ifneq ($(CONFIG_X86_RESET_VECTOR),) 966rom: u-boot.rom FORCE 967 968IFDTOOL=$(objtree)/tools/ifdtool 969IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb 970IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1) 971IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin 972IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin 973 974ifneq ($(CONFIG_HAVE_INTEL_ME),) 975IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin 976IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin 977endif 978 979ifneq ($(CONFIG_HAVE_MRC),) 980IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin 981endif 982 983ifneq ($(CONFIG_HAVE_FSP),) 984IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE) 985endif 986 987ifneq ($(CONFIG_HAVE_CMC),) 988IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE) 989endif 990 991ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),) 992IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE) 993endif 994 995quiet_cmd_ifdtool = IFDTOOL $@ 996cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp; 997ifneq ($(CONFIG_HAVE_INTEL_ME),) 998cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp; 999endif 1000cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp; 1001cmd_ifdtool += mv u-boot.tmp $@ 1002 1003u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin 1004 $(call if_changed,ifdtool) 1005 1006OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec 1007u-boot-x86-16bit.bin: u-boot FORCE 1008 $(call if_changed,objcopy) 1009endif 1010 1011ifneq ($(CONFIG_SUNXI),) 1012OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ 1013 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff 1014u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \ 1015 u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE 1016 $(call if_changed,pad_cat) 1017endif 1018 1019ifneq ($(CONFIG_TEGRA),) 1020OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 1021u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE 1022 $(call if_changed,pad_cat) 1023 1024ifeq ($(CONFIG_OF_SEPARATE),y) 1025u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE 1026 $(call if_changed,cat) 1027endif 1028endif 1029 1030u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE 1031 $(call if_changed,cat) 1032 1033#Add a target to create boot binary having SPL binary in PBI format 1034#concatenated with u-boot binary. It is need by PowerPC SoC having 1035#internal SRAM <= 512KB. 1036MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 1037 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ 1038 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) 1039 1040spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE 1041 $(call if_changed,mkimage) 1042 1043ifeq ($(ARCH),arm) 1044UBOOT_BINLOAD := u-boot.img 1045else 1046UBOOT_BINLOAD := u-boot.bin 1047endif 1048 1049OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 1050 --gap-fill=0xff 1051 1052u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE 1053 $(call if_changed,pad_cat) 1054 1055# PPC4xx needs the SPL at the end of the image, since the reset vector 1056# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target 1057# and need to introduce a new build target with the full blown U-Boot 1058# at the start padded up to the start of the SPL image. And then concat 1059# the SPL image to the end. 1060 1061OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \ 1062 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff 1063u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE 1064 $(call if_changed,pad_cat) 1065 1066# Create a new ELF from a raw binary file. This is useful for arm64 1067# where static relocation needs to be performed on the raw binary, 1068# but certain simulators only accept an ELF file (but don't do the 1069# relocation). 1070# FIXME refactor dts/Makefile to share target/arch detection 1071u-boot.elf: u-boot.bin 1072 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \ 1073 $< u-boot-elf.o 1074 @$(LD) u-boot-elf.o -o $@ \ 1075 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \ 1076 -Ttext=$(CONFIG_SYS_TEXT_BASE) 1077 1078# Rule to link u-boot 1079# May be overridden by arch/$(ARCH)/config.mk 1080quiet_cmd_u-boot__ ?= LD $@ 1081 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \ 1082 -T u-boot.lds $(u-boot-init) \ 1083 --start-group $(u-boot-main) --end-group \ 1084 $(PLATFORM_LIBS) -Map u-boot.map 1085 1086quiet_cmd_smap = GEN common/system_map.o 1087cmd_smap = \ 1088 smap=`$(call SYSTEM_MAP,u-boot) | \ 1089 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 1090 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ 1091 -c $(srctree)/common/system_map.c -o common/system_map.o 1092 1093u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds 1094 $(call if_changed,u-boot__) 1095ifeq ($(CONFIG_KALLSYMS),y) 1096 $(call cmd,smap) 1097 $(call cmd,u-boot__) common/system_map.o 1098endif 1099 1100# The actual objects are generated when descending, 1101# make sure no implicit rule kicks in 1102$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; 1103 1104# Handle descending into subdirectories listed in $(vmlinux-dirs) 1105# Preset locale variables to speed up the build process. Limit locale 1106# tweaks to this spot to avoid wrong language settings when running 1107# make menuconfig etc. 1108# Error messages still appears in the original language 1109 1110PHONY += $(u-boot-dirs) 1111$(u-boot-dirs): prepare scripts 1112 $(Q)$(MAKE) $(build)=$@ 1113 1114tools: prepare 1115# The "tools" are needed early 1116$(filter-out tools, $(u-boot-dirs)): tools 1117# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC 1118# is "yes"), so compile examples after U-Boot is compiled. 1119examples: $(filter-out examples, $(u-boot-dirs)) 1120 1121define filechk_uboot.release 1122 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1123endef 1124 1125# Store (new) UBOOTRELEASE string in include/config/uboot.release 1126include/config/uboot.release: include/config/auto.conf FORCE 1127 $(call filechk,uboot.release) 1128 1129 1130# Things we need to do before we recursively start building the kernel 1131# or the modules are listed in "prepare". 1132# A multi level approach is used. prepareN is processed before prepareN-1. 1133# archprepare is used in arch Makefiles and when processed asm symlink, 1134# version.h and scripts_basic is processed / created. 1135 1136# Listed in dependency order 1137PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 1138 1139# prepare3 is used to check if we are building in a separate output directory, 1140# and if so do: 1141# 1) Check that make has not been executed in the kernel src $(srctree) 1142prepare3: include/config/uboot.release 1143ifneq ($(KBUILD_SRC),) 1144 @$(kecho) ' Using $(srctree) as source for U-Boot' 1145 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ 1146 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ 1147 echo >&2 " in the '$(srctree)' directory.";\ 1148 /bin/false; \ 1149 fi; 1150endif 1151 1152# prepare2 creates a makefile if using a separate output directory 1153prepare2: prepare3 outputmakefile 1154 1155prepare1: prepare2 $(version_h) $(timestamp_h) \ 1156 include/config/auto.conf 1157ifeq ($(__HAVE_ARCH_GENERIC_BOARD),) 1158ifeq ($(CONFIG_SYS_GENERIC_BOARD),y) 1159 @echo >&2 " Your architecture does not support generic board." 1160 @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file." 1161 @/bin/false 1162endif 1163endif 1164ifeq ($(wildcard $(LDSCRIPT)),) 1165 @echo >&2 " Could not find linker script." 1166 @/bin/false 1167endif 1168 1169archprepare: prepare1 scripts_basic 1170 1171prepare0: archprepare FORCE 1172 $(Q)$(MAKE) $(build)=. 1173 1174# All the preparing.. 1175prepare: prepare0 1176 1177# Generate some files 1178# --------------------------------------------------------------------------- 1179 1180define filechk_version.h 1181 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ 1182 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \ 1183 echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \ 1184 echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; ) 1185endef 1186 1187define filechk_timestamp.h 1188 (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1189 LC_ALL=C date +'#define U_BOOT_TIME "%T"') 1190endef 1191 1192$(version_h): include/config/uboot.release FORCE 1193 $(call filechk,version.h) 1194 1195$(timestamp_h): $(srctree)/Makefile FORCE 1196 $(call filechk,timestamp.h) 1197 1198# --------------------------------------------------------------------------- 1199 1200PHONY += depend dep 1201depend dep: 1202 @echo '*** Warning: make $@ is unnecessary now.' 1203 1204# --------------------------------------------------------------------------- 1205quiet_cmd_cpp_lds = LDS $@ 1206cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 1207 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 1208 1209u-boot.lds: $(LDSCRIPT) prepare FORCE 1210 $(call if_changed_dep,cpp_lds) 1211 1212spl/u-boot-spl.bin: spl/u-boot-spl 1213 @: 1214spl/u-boot-spl: tools prepare 1215 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all 1216 1217spl/sunxi-spl.bin: spl/u-boot-spl 1218 @: 1219 1220tpl/u-boot-tpl.bin: tools prepare 1221 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all 1222 1223TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) 1224 1225FIND := find 1226FINDFLAGS := -L 1227 1228tags ctags: 1229 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1230 -name '*.[chS]' -print` 1231 1232etags: 1233 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1234 -name '*.[chS]' -print` 1235cscope: 1236 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ 1237 cscope.files 1238 cscope -b -q -k 1239 1240SYSTEM_MAP = \ 1241 $(NM) $1 | \ 1242 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 1243 LC_ALL=C sort 1244System.map: u-boot 1245 @$(call SYSTEM_MAP,$<) > $@ 1246 1247checkdtc: 1248 @if test $(call dtc-version) -lt 0104; then \ 1249 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ 1250 false; \ 1251 fi 1252 1253######################################################################### 1254 1255# ARM relocations should all be R_ARM_RELATIVE (32-bit) or 1256# R_AARCH64_RELATIVE (64-bit). 1257checkarmreloc: u-boot 1258 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ 1259 grep R_A | sort -u`"; \ 1260 if test "$$RELOC" != "R_ARM_RELATIVE" -a \ 1261 "$$RELOC" != "R_AARCH64_RELATIVE"; then \ 1262 echo "$< contains unexpected relocations: $$RELOC"; \ 1263 false; \ 1264 fi 1265 1266env: scripts_basic 1267 $(Q)$(MAKE) $(build)=tools/$@ 1268 1269tools-only: scripts_basic $(version_h) $(timestamp_h) 1270 $(Q)$(MAKE) $(build)=tools 1271 1272tools-all: export HOST_TOOLS_ALL=y 1273tools-all: env tools ; 1274 1275cross_tools: export CROSS_BUILD_TOOLS=y 1276cross_tools: tools ; 1277 1278.PHONY : CHANGELOG 1279CHANGELOG: 1280 git log --no-merges U-Boot-1_1_5.. | \ 1281 unexpand -a | sed -e 's/\s\s*$$//' > $@ 1282 1283include/license.h: tools/bin2header COPYING 1284 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 1285######################################################################### 1286 1287### 1288# Cleaning is done on three levels. 1289# make clean Delete most generated files 1290# Leave enough to build external modules 1291# make mrproper Delete the current configuration, and all generated files 1292# make distclean Remove editor backup files, patch leftover files and the like 1293 1294# Directories & files removed with 'make clean' 1295CLEAN_DIRS += $(MODVERDIR) \ 1296 $(foreach d, spl tpl, $(patsubst %,$d/%, \ 1297 $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) 1298 1299CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ 1300 boot* u-boot* MLO* SPL System.map 1301 1302# Directories & files removed with 'make mrproper' 1303MRPROPER_DIRS += include/config include/generated spl tpl \ 1304 .tmp_objdiff 1305MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ 1306 ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS 1307 1308# clean - Delete most, but leave enough to build external modules 1309# 1310clean: rm-dirs := $(CLEAN_DIRS) 1311clean: rm-files := $(CLEAN_FILES) 1312 1313clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f)) 1314 1315clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook) 1316 1317PHONY += $(clean-dirs) clean archclean 1318$(clean-dirs): 1319 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1320 1321# TODO: Do not use *.cfgtmp 1322clean: $(clean-dirs) 1323 $(call cmd,rmdirs) 1324 $(call cmd,rmfiles) 1325 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1326 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1327 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \ 1328 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1329 -o -name '*.symtypes' -o -name 'modules.order' \ 1330 -o -name modules.builtin -o -name '.tmp_*.o.*' \ 1331 -o -name '*.gcno' \) -type f -print | xargs rm -f 1332 1333# mrproper - Delete all generated files, including .config 1334# 1335mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) 1336mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1337mrproper-dirs := $(addprefix _mrproper_,scripts) 1338 1339PHONY += $(mrproper-dirs) mrproper archmrproper 1340$(mrproper-dirs): 1341 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1342 1343mrproper: clean $(mrproper-dirs) 1344 $(call cmd,rmdirs) 1345 $(call cmd,rmfiles) 1346 @rm -f arch/*/include/asm/arch 1347 1348# distclean 1349# 1350PHONY += distclean 1351 1352distclean: mrproper 1353 @find $(srctree) $(RCS_FIND_IGNORE) \ 1354 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1355 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ 1356 -o -name '.*.rej' -o -name '*%' -o -name 'core' \ 1357 -o -name '*.pyc' \) \ 1358 -type f -print | xargs rm -f 1359 @rm -f boards.cfg 1360 1361backup: 1362 F=`basename $(srctree)` ; cd .. ; \ 1363 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 1364 1365help: 1366 @echo 'Cleaning targets:' 1367 @echo ' clean - Remove most generated files but keep the config' 1368 @echo ' mrproper - Remove all generated files + config + various backup files' 1369 @echo ' distclean - mrproper + remove editor backup and patch files' 1370 @echo '' 1371 @echo 'Configuration targets:' 1372 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1373 @echo '' 1374 @echo 'Other generic targets:' 1375 @echo ' all - Build all necessary images depending on configuration' 1376 @echo '* u-boot - Build the bare u-boot' 1377 @echo ' dir/ - Build all files in dir and below' 1378 @echo ' dir/file.[oisS] - Build specified target only' 1379 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1380 @echo ' (requires a recent binutils and recent build (System.map))' 1381 @echo ' tags/ctags - Generate ctags file for editors' 1382 @echo ' etags - Generate etags file for editors' 1383 @echo ' cscope - Generate cscope index' 1384 @echo ' ubootrelease - Output the release version string (use with make -s)' 1385 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' 1386 @echo '' 1387 @echo 'Static analysers' 1388 @echo ' checkstack - Generate a list of stack hogs' 1389 @echo '' 1390 @echo 'Documentation targets:' 1391 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp 1392 @echo '' 1393 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1394 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1395 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1396 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' 1397 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1398 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1399 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' 1400 @echo ' 1: warnings which may be relevant and do not occur too often' 1401 @echo ' 2: warnings which occur quite often but may still be relevant' 1402 @echo ' 3: more obscure warnings, can most likely be ignored' 1403 @echo ' Multiple levels can be combined with W=12 or W=123' 1404 @echo '' 1405 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1406 @echo 'For further info see the ./README file' 1407 1408 1409# Documentation targets 1410# --------------------------------------------------------------------------- 1411%docs: scripts_basic FORCE 1412 $(Q)$(MAKE) $(build)=scripts build_docproc 1413 $(Q)$(MAKE) $(build)=doc/DocBook $@ 1414 1415# Dummies... 1416PHONY += prepare scripts 1417prepare: ; 1418scripts: ; 1419 1420endif #ifeq ($(config-targets),1) 1421endif #ifeq ($(mixed-targets),1) 1422 1423PHONY += checkstack ubootrelease ubootversion 1424 1425checkstack: 1426 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ 1427 $(PERL) $(src)/scripts/checkstack.pl $(ARCH) 1428 1429ubootrelease: 1430 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1431 1432ubootversion: 1433 @echo $(UBOOTVERSION) 1434 1435# Single targets 1436# --------------------------------------------------------------------------- 1437# Single targets are compatible with: 1438# - build with mixed source and output 1439# - build with separate output dir 'make O=...' 1440# - external modules 1441# 1442# target-dir => where to store outputfile 1443# build-dir => directory in kernel source tree to use 1444 1445ifeq ($(KBUILD_EXTMOD),) 1446 build-dir = $(patsubst %/,%,$(dir $@)) 1447 target-dir = $(dir $@) 1448else 1449 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) 1450 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) 1451 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) 1452endif 1453 1454%.s: %.c prepare scripts FORCE 1455 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1456%.i: %.c prepare scripts FORCE 1457 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1458%.o: %.c prepare scripts FORCE 1459 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1460%.lst: %.c prepare scripts FORCE 1461 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1462%.s: %.S prepare scripts FORCE 1463 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1464%.o: %.S prepare scripts FORCE 1465 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1466%.symtypes: %.c prepare scripts FORCE 1467 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1468 1469# Modules 1470/: prepare scripts FORCE 1471 $(cmd_crmodverdir) 1472 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1473 $(build)=$(build-dir) 1474%/: prepare scripts FORCE 1475 $(cmd_crmodverdir) 1476 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1477 $(build)=$(build-dir) 1478%.ko: prepare scripts FORCE 1479 $(cmd_crmodverdir) 1480 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1481 $(build)=$(build-dir) $(@:.ko=.o) 1482 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1483 1484# FIXME Should go into a make.lib or something 1485# =========================================================================== 1486 1487quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) 1488 cmd_rmdirs = rm -rf $(rm-dirs) 1489 1490quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1491 cmd_rmfiles = rm -f $(rm-files) 1492 1493# read all saved command lines 1494 1495targets := $(wildcard $(sort $(targets))) 1496cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 1497 1498ifneq ($(cmd_files),) 1499 $(cmd_files): ; # Do not try to update included dependency files 1500 include $(cmd_files) 1501endif 1502 1503# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir 1504# Usage: 1505# $(Q)$(MAKE) $(clean)=dir 1506clean := -f $(srctree)/scripts/Makefile.clean obj 1507 1508endif # skip-makefile 1509 1510PHONY += FORCE 1511FORCE: 1512 1513# Declare the contents of the .PHONY variable as phony. We keep that 1514# information in a variable so we can use it in if_changed and friends. 1515.PHONY: $(PHONY) 1516