1# 2# (C) Copyright 2000-2008 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 2008 25PATCHLEVEL = 10 26SUBLEVEL = 27EXTRAVERSION = 28ifneq "$(SUBLEVEL)" "" 29U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 30else 31U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) 32endif 33VERSION_FILE = $(obj)include/version_autogenerated.h 34 35HOSTARCH := $(shell uname -m | \ 36 sed -e s/i.86/i386/ \ 37 -e s/sun4u/sparc64/ \ 38 -e s/arm.*/arm/ \ 39 -e s/sa110/arm/ \ 40 -e s/powerpc/ppc/ \ 41 -e s/ppc64/ppc/ \ 42 -e s/macppc/ppc/) 43 44HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 45 sed -e 's/\(cygwin\).*/cygwin/') 46 47export HOSTARCH HOSTOS 48 49# Deal with colliding definitions from tcsh etc. 50VENDOR= 51 52######################################################################### 53# Allow for silent builds 54ifeq (,$(findstring s,$(MAKEFLAGS))) 55XECHO = echo 56else 57XECHO = : 58endif 59 60######################################################################### 61# 62# U-boot build supports producing a object files to the separate external 63# directory. Two use cases are supported: 64# 65# 1) Add O= to the make command line 66# 'make O=/tmp/build all' 67# 68# 2) Set environement variable BUILD_DIR to point to the desired location 69# 'export BUILD_DIR=/tmp/build' 70# 'make' 71# 72# The second approach can also be used with a MAKEALL script 73# 'export BUILD_DIR=/tmp/build' 74# './MAKEALL' 75# 76# Command line 'O=' setting overrides BUILD_DIR environent variable. 77# 78# When none of the above methods is used the local build is performed and 79# the object files are placed in the source directory. 80# 81 82ifdef O 83ifeq ("$(origin O)", "command line") 84BUILD_DIR := $(O) 85endif 86endif 87 88ifneq ($(BUILD_DIR),) 89saved-output := $(BUILD_DIR) 90 91# Attempt to create a output directory. 92$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) 93 94# Verify if it was successful. 95BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) 96$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) 97endif # ifneq ($(BUILD_DIR),) 98 99OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) 100SRCTREE := $(CURDIR) 101TOPDIR := $(SRCTREE) 102LNDIR := $(OBJTREE) 103export TOPDIR SRCTREE OBJTREE 104 105MKCONFIG := $(SRCTREE)/mkconfig 106export MKCONFIG 107 108ifneq ($(OBJTREE),$(SRCTREE)) 109REMOTE_BUILD := 1 110export REMOTE_BUILD 111endif 112 113# $(obj) and (src) are defined in config.mk but here in main Makefile 114# we also need them before config.mk is included which is the case for 115# some targets like unconfig, clean, clobber, distclean, etc. 116ifneq ($(OBJTREE),$(SRCTREE)) 117obj := $(OBJTREE)/ 118src := $(SRCTREE)/ 119else 120obj := 121src := 122endif 123export obj src 124 125# Make sure CDPATH settings don't interfere 126unexport CDPATH 127 128######################################################################### 129 130ifeq ($(ARCH),powerpc) 131ARCH = ppc 132endif 133 134ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) 135 136# load ARCH, BOARD, and CPU configuration 137include $(obj)include/config.mk 138export ARCH CPU BOARD VENDOR SOC 139 140ifndef CROSS_COMPILE 141ifeq ($(HOSTARCH),$(ARCH)) 142CROSS_COMPILE = 143else 144ifeq ($(ARCH),ppc) 145CROSS_COMPILE = ppc_8xx- 146endif 147ifeq ($(ARCH),arm) 148CROSS_COMPILE = arm-linux- 149endif 150ifeq ($(ARCH),i386) 151CROSS_COMPILE = i386-linux- 152endif 153ifeq ($(ARCH),mips) 154CROSS_COMPILE = mips_4KC- 155endif 156ifeq ($(ARCH),nios) 157CROSS_COMPILE = nios-elf- 158endif 159ifeq ($(ARCH),nios2) 160CROSS_COMPILE = nios2-elf- 161endif 162ifeq ($(ARCH),m68k) 163CROSS_COMPILE = m68k-elf- 164endif 165ifeq ($(ARCH),microblaze) 166CROSS_COMPILE = mb- 167endif 168ifeq ($(ARCH),blackfin) 169CROSS_COMPILE = bfin-uclinux- 170endif 171ifeq ($(ARCH),avr32) 172CROSS_COMPILE = avr32-linux- 173endif 174ifeq ($(ARCH),sh) 175CROSS_COMPILE = sh4-linux- 176endif 177ifeq ($(ARCH),sparc) 178CROSS_COMPILE = sparc-elf- 179endif # sparc 180endif # HOSTARCH,ARCH 181endif # CROSS_COMPILE 182 183export CROSS_COMPILE 184 185# load other configuration 186include $(TOPDIR)/config.mk 187 188######################################################################### 189# U-Boot objects....order is important (i.e. start must be first) 190 191OBJS = cpu/$(CPU)/start.o 192ifeq ($(CPU),i386) 193OBJS += cpu/$(CPU)/start16.o 194OBJS += cpu/$(CPU)/reset.o 195endif 196ifeq ($(CPU),ppc4xx) 197OBJS += cpu/$(CPU)/resetvec.o 198endif 199ifeq ($(CPU),mpc85xx) 200OBJS += cpu/$(CPU)/resetvec.o 201endif 202 203OBJS := $(addprefix $(obj),$(OBJS)) 204 205LIBS = lib_generic/libgeneric.a 206LIBS += lib_generic/lzma/liblzma.a 207LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ 208 "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) 209LIBS += cpu/$(CPU)/lib$(CPU).a 210ifdef SOC 211LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 212endif 213ifeq ($(CPU),ixp) 214LIBS += cpu/ixp/npe/libnpe.a 215endif 216LIBS += lib_$(ARCH)/lib$(ARCH).a 217LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 218 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a 219LIBS += net/libnet.a 220LIBS += disk/libdisk.a 221LIBS += drivers/bios_emulator/libatibiosemu.a 222LIBS += drivers/block/libblock.a 223LIBS += drivers/dma/libdma.a 224LIBS += drivers/hwmon/libhwmon.a 225LIBS += drivers/i2c/libi2c.a 226LIBS += drivers/input/libinput.a 227LIBS += drivers/misc/libmisc.a 228LIBS += drivers/mmc/libmmc.a 229LIBS += drivers/mtd/libmtd.a 230LIBS += drivers/mtd/nand/libnand.a 231LIBS += drivers/mtd/nand_legacy/libnand_legacy.a 232LIBS += drivers/mtd/onenand/libonenand.a 233LIBS += drivers/mtd/spi/libspi_flash.a 234LIBS += drivers/net/libnet.a 235LIBS += drivers/net/phy/libphy.a 236LIBS += drivers/net/sk98lin/libsk98lin.a 237LIBS += drivers/pci/libpci.a 238LIBS += drivers/pcmcia/libpcmcia.a 239LIBS += drivers/spi/libspi.a 240ifeq ($(CPU),mpc83xx) 241LIBS += drivers/qe/qe.a 242endif 243ifeq ($(CPU),mpc85xx) 244LIBS += drivers/qe/qe.a 245LIBS += cpu/mpc8xxx/ddr/libddr.a 246TAG_SUBDIRS += cpu/mpc8xxx 247endif 248ifeq ($(CPU),mpc86xx) 249LIBS += cpu/mpc8xxx/ddr/libddr.a 250TAG_SUBDIRS += cpu/mpc8xxx 251endif 252LIBS += drivers/rtc/librtc.a 253LIBS += drivers/serial/libserial.a 254LIBS += drivers/usb/libusb.a 255LIBS += drivers/video/libvideo.a 256LIBS += common/libcommon.a 257LIBS += libfdt/libfdt.a 258LIBS += api/libapi.a 259LIBS += post/libpost.a 260 261LIBS := $(addprefix $(obj),$(LIBS)) 262.PHONY : $(LIBS) $(VERSION_FILE) 263 264LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a 265LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) 266 267# Add GCC lib 268PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 269 270# The "tools" are needed early, so put this first 271# Don't include stuff already done in $(LIBS) 272SUBDIRS = tools \ 273 examples \ 274 api_examples 275 276.PHONY : $(SUBDIRS) 277 278ifeq ($(CONFIG_NAND_U_BOOT),y) 279NAND_SPL = nand_spl 280U_BOOT_NAND = $(obj)u-boot-nand.bin 281endif 282 283ifeq ($(CONFIG_ONENAND_U_BOOT),y) 284ONENAND_IPL = onenand_ipl 285U_BOOT_ONENAND = $(obj)u-boot-onenand.bin 286endif 287 288__OBJS := $(subst $(obj),,$(OBJS)) 289__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) 290 291######################################################################### 292######################################################################### 293 294ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) 295ifeq ($(ARCH),blackfin) 296ALL += $(obj)u-boot.ldr 297endif 298 299all: $(ALL) 300 301$(obj)u-boot.hex: $(obj)u-boot 302 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 303 304$(obj)u-boot.srec: $(obj)u-boot 305 $(OBJCOPY) -O srec $< $@ 306 307$(obj)u-boot.bin: $(obj)u-boot 308 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 309 310$(obj)u-boot.ldr: $(obj)u-boot 311 $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS) 312 313$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr 314 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 315 316$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr 317 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 318 319$(obj)u-boot.img: $(obj)u-boot.bin 320 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 321 -a $(TEXT_BASE) -e 0 \ 322 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 323 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 324 -d $< $@ 325 326$(obj)u-boot.sha1: $(obj)u-boot.bin 327 $(obj)tools/ubsha1 $(obj)u-boot.bin 328 329$(obj)u-boot.dis: $(obj)u-boot 330 $(OBJDUMP) -d $< > $@ 331 332$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) 333 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ 334 sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 335 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ 336 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ 337 -Map u-boot.map -o u-boot 338 339$(OBJS): depend $(obj)include/autoconf.mk 340 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) 341 342$(LIBS): depend $(obj)include/autoconf.mk 343 $(MAKE) -C $(dir $(subst $(obj),,$@)) 344 345$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk 346 $(MAKE) -C $(dir $(subst $(obj),,$@)) 347 348$(SUBDIRS): depend $(obj)include/autoconf.mk 349 $(MAKE) -C $@ all 350 351$(LDSCRIPT): depend $(obj)include/autoconf.mk 352 $(MAKE) -C $(dir $@) $(notdir $@) 353 354$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk 355 $(MAKE) -C nand_spl/board/$(BOARDDIR) all 356 357$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk 358 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin 359 360$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk 361 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all 362 363$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk 364 cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin 365 cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin 366 367$(VERSION_FILE): 368 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ 369 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \ 370 ) > $@.tmp 371 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 372 373gdbtools: 374 $(MAKE) -C tools/gdb all || exit 1 375 376updater: 377 $(MAKE) -C tools/updater all || exit 1 378 379env: 380 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 381 382depend dep: $(VERSION_FILE) 383 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done 384 385TAG_SUBDIRS += include 386TAG_SUBDIRS += lib_generic board/$(BOARDDIR) 387TAG_SUBDIRS += cpu/$(CPU) 388TAG_SUBDIRS += lib_$(ARCH) 389TAG_SUBDIRS += fs/cramfs 390TAG_SUBDIRS += fs/fat 391TAG_SUBDIRS += fs/fdos 392TAG_SUBDIRS += fs/jffs2 393TAG_SUBDIRS += fs/yaffs2 394TAG_SUBDIRS += net 395TAG_SUBDIRS += disk 396TAG_SUBDIRS += common 397TAG_SUBDIRS += drivers/bios_emulator 398TAG_SUBDIRS += drivers/block 399TAG_SUBDIRS += drivers/hwmon 400TAG_SUBDIRS += drivers/i2c 401TAG_SUBDIRS += drivers/input 402TAG_SUBDIRS += drivers/misc 403TAG_SUBDIRS += drivers/mmc 404TAG_SUBDIRS += drivers/mtd 405TAG_SUBDIRS += drivers/mtd/nand 406TAG_SUBDIRS += drivers/mtd/nand_legacy 407TAG_SUBDIRS += drivers/mtd/onenand 408TAG_SUBDIRS += drivers/mtd/spi 409TAG_SUBDIRS += drivers/net 410TAG_SUBDIRS += drivers/net/sk98lin 411TAG_SUBDIRS += drivers/pci 412TAG_SUBDIRS += drivers/pcmcia 413TAG_SUBDIRS += drivers/qe 414TAG_SUBDIRS += drivers/rtc 415TAG_SUBDIRS += drivers/serial 416TAG_SUBDIRS += drivers/spi 417TAG_SUBDIRS += drivers/usb 418TAG_SUBDIRS += drivers/video 419 420tags ctags: 421 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 422 -name '*.[ch]' -print` 423 424etags: 425 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 426 -name '*.[ch]' -print` 427cscope: 428 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ 429 > cscope.files 430 cscope -b -q -k 431 432$(obj)System.map: $(obj)u-boot 433 @$(NM) $< | \ 434 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 435 sort > $(obj)System.map 436 437# 438# Auto-generate the autoconf.mk file (which is included by all makefiles) 439# 440# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 441# the dep file is only include in this top level makefile to determine when 442# to regenerate the autoconf.mk file. 443$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h 444 @$(XECHO) Generating $@ ; \ 445 set -e ; \ 446 : Generate the dependancies ; \ 447 $(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \ 448 -MQ $(obj)include/autoconf.mk include/common.h > $@ 449 450$(obj)include/autoconf.mk: $(obj)include/config.h 451 @$(XECHO) Generating $@ ; \ 452 set -e ; \ 453 : Extract the config macros ; \ 454 $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ 455 sed -n -f tools/scripts/define2mk.sed > $@ 456 457sinclude $(obj)include/autoconf.mk.dep 458 459######################################################################### 460else # !config.mk 461all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ 462$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ 463$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \ 464dep tags ctags etags cscope $(obj)System.map: 465 @echo "System not configured - see README" >&2 466 @ exit 1 467endif # config.mk 468 469.PHONY : CHANGELOG 470CHANGELOG: 471 git log --no-merges U-Boot-1_1_5.. | \ 472 unexpand -a | sed -e 's/\s\s*$$//' > $@ 473 474include/license.h: tools/bin2header COPYING 475 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 476######################################################################### 477 478unconfig: 479 @rm -f $(obj)include/config.h $(obj)include/config.mk \ 480 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ 481 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep 482 483#======================================================================== 484# PowerPC 485#======================================================================== 486 487######################################################################### 488## MPC5xx Systems 489######################################################################### 490 491canmb_config: unconfig 492 @$(MKCONFIG) -a canmb ppc mpc5xxx canmb 493 494cmi_mpc5xx_config: unconfig 495 @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi 496 497PATI_config: unconfig 498 @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl 499 500######################################################################### 501## MPC5xxx Systems 502######################################################################### 503 504aev_config: unconfig 505 @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc 506 507BC3450_config: unconfig 508 @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 509 510cm5200_config: unconfig 511 @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 512 513cpci5200_config: unconfig 514 @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd 515 516hmi1001_config: unconfig 517 @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 518 519Lite5200_config \ 520Lite5200_LOWBOOT_config \ 521Lite5200_LOWBOOT08_config \ 522icecube_5200_config \ 523icecube_5200_LOWBOOT_config \ 524icecube_5200_LOWBOOT08_config \ 525icecube_5200_DDR_config \ 526icecube_5200_DDR_LOWBOOT_config \ 527icecube_5200_DDR_LOWBOOT08_config \ 528icecube_5100_config: unconfig 529 @mkdir -p $(obj)include 530 @mkdir -p $(obj)board/icecube 531 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 532 { if [ "$(findstring DDR,$@)" ] ; \ 533 then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 534 else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 535 fi ; \ 536 $(XECHO) "... with LOWBOOT configuration" ; \ 537 } 538 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 539 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 540 echo "... with 8 MB flash only" ; \ 541 $(XECHO) "... with LOWBOOT configuration" ; \ 542 } 543 @[ -z "$(findstring DDR,$@)" ] || \ 544 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 545 $(XECHO) "... DDR memory revision" ; \ 546 } 547 @[ -z "$(findstring 5200,$@)" ] || \ 548 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 549 $(XECHO) "... with MPC5200 processor" ; \ 550 } 551 @[ -z "$(findstring 5100,$@)" ] || \ 552 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 553 $(XECHO) "... with MGT5100 processor" ; \ 554 } 555 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 556 557jupiter_config: unconfig 558 @$(MKCONFIG) jupiter ppc mpc5xxx jupiter 559 560inka4x0_config: unconfig 561 @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 562 563lite5200b_config \ 564lite5200b_PM_config \ 565lite5200b_LOWBOOT_config: unconfig 566 @mkdir -p $(obj)include 567 @mkdir -p $(obj)board/icecube 568 @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h 569 @ $(XECHO) "... DDR memory revision" 570 @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h 571 @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h 572 @[ -z "$(findstring _PM_,$@)" ] || \ 573 { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ 574 $(XECHO) "... with power management (low-power mode) support" ; \ 575 } 576 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 577 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 578 $(XECHO) "... with LOWBOOT configuration" ; \ 579 } 580 @ $(XECHO) "... with MPC5200B processor" 581 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 582 583mcc200_config \ 584mcc200_SDRAM_config \ 585mcc200_highboot_config \ 586mcc200_COM12_config \ 587mcc200_COM12_SDRAM_config \ 588mcc200_COM12_highboot_config \ 589mcc200_COM12_highboot_SDRAM_config \ 590mcc200_highboot_SDRAM_config \ 591prs200_config \ 592prs200_DDR_config \ 593prs200_highboot_config \ 594prs200_highboot_DDR_config: unconfig 595 @mkdir -p $(obj)include 596 @mkdir -p $(obj)board/mcc200 597 @[ -n "$(findstring highboot,$@)" ] || \ 598 { $(XECHO) "... with lowboot configuration" ; \ 599 } 600 @[ -z "$(findstring highboot,$@)" ] || \ 601 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ 602 $(XECHO) "... with highboot configuration" ; \ 603 } 604 @[ -n "$(findstring _SDRAM,$@)" ] || \ 605 { if [ -n "$(findstring mcc200,$@)" ]; \ 606 then \ 607 $(XECHO) "... with DDR" ; \ 608 else \ 609 if [ -n "$(findstring _DDR,$@)" ];\ 610 then \ 611 $(XECHO) "... with DDR" ; \ 612 else \ 613 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ 614 $(XECHO) "... with SDRAM" ; \ 615 fi; \ 616 fi; \ 617 } 618 @[ -z "$(findstring _SDRAM,$@)" ] || \ 619 { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ 620 $(XECHO) "... with SDRAM" ; \ 621 } 622 @[ -z "$(findstring COM12,$@)" ] || \ 623 { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ 624 $(XECHO) "... with console on COM12" ; \ 625 } 626 @[ -z "$(findstring prs200,$@)" ] || \ 627 { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ 628 } 629 @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 630 631mecp5200_config: unconfig 632 @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd 633 634motionpro_config: unconfig 635 @$(MKCONFIG) motionpro ppc mpc5xxx motionpro 636 637mucmc52_config: unconfig 638 @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52 639 640munices_config: unconfig 641 @$(MKCONFIG) munices ppc mpc5xxx munices 642 643MVBC_P_config: unconfig 644 @mkdir -p $(obj)include 645 @mkdir -p $(obj)board/mvbc_p 646 @ >$(obj)include/config.h 647 @[ -z "$(findstring MVBC_P,$@)" ] || \ 648 { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } 649 @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision 650 651o2dnt_config: unconfig 652 @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt 653 654pf5200_config: unconfig 655 @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd 656 657PM520_config \ 658PM520_DDR_config \ 659PM520_ROMBOOT_config \ 660PM520_ROMBOOT_DDR_config: unconfig 661 @mkdir -p $(obj)include 662 @[ -z "$(findstring DDR,$@)" ] || \ 663 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 664 $(XECHO) "... DDR memory revision" ; \ 665 } 666 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 667 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 668 $(XECHO) "... booting from 8-bit flash" ; \ 669 } 670 @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 671 672smmaco4_config: unconfig 673 @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc 674 675spieval_config: unconfig 676 @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc 677 678TB5200_B_config \ 679TB5200_config: unconfig 680 @mkdir -p $(obj)include 681 @[ -z "$(findstring _B,$@)" ] || \ 682 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 683 $(XECHO) "... with MPC5200B processor" ; \ 684 } 685 @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc 686 687MINI5200_config \ 688EVAL5200_config \ 689TOP5200_config: unconfig 690 @mkdir -p $(obj)include 691 @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 692 @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk 693 694Total5100_config \ 695Total5200_config \ 696Total5200_lowboot_config \ 697Total5200_Rev2_config \ 698Total5200_Rev2_lowboot_config: unconfig 699 @mkdir -p $(obj)include 700 @mkdir -p $(obj)board/total5200 701 @[ -z "$(findstring 5100,$@)" ] || \ 702 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 703 $(XECHO) "... with MGT5100 processor" ; \ 704 } 705 @[ -z "$(findstring 5200,$@)" ] || \ 706 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 707 $(XECHO) "... with MPC5200 processor" ; \ 708 } 709 @[ -n "$(findstring Rev,$@)" ] || \ 710 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ 711 $(XECHO) "... revision 1 board" ; \ 712 } 713 @[ -z "$(findstring Rev2_,$@)" ] || \ 714 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ 715 $(XECHO) "... revision 2 board" ; \ 716 } 717 @[ -z "$(findstring lowboot_,$@)" ] || \ 718 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ 719 $(XECHO) "... with lowboot configuration" ; \ 720 } 721 @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 722 723cam5200_config \ 724cam5200_niosflash_config \ 725fo300_config \ 726MiniFAP_config \ 727TQM5200S_config \ 728TQM5200S_HIGHBOOT_config \ 729TQM5200_B_config \ 730TQM5200_B_HIGHBOOT_config \ 731TQM5200_config \ 732TQM5200_STK100_config: unconfig 733 @mkdir -p $(obj)include 734 @mkdir -p $(obj)board/tqc/tqm5200 735 @[ -z "$(findstring cam5200,$@)" ] || \ 736 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ 737 echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 738 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 739 $(XECHO) "... TQM5200S on Cam5200" ; \ 740 } 741 @[ -z "$(findstring niosflash,$@)" ] || \ 742 { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ 743 $(XECHO) "... with NIOS flash driver" ; \ 744 } 745 @[ -z "$(findstring fo300,$@)" ] || \ 746 { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ 747 $(XECHO) "... TQM5200 on FO300" ; \ 748 } 749 @[ -z "$(findstring MiniFAP,$@)" ] || \ 750 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ 751 $(XECHO) "... TQM5200_AC on MiniFAP" ; \ 752 } 753 @[ -z "$(findstring STK100,$@)" ] || \ 754 { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ 755 $(XECHO) "... on a STK52XX.100 base board" ; \ 756 } 757 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 758 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 759 } 760 @[ -z "$(findstring TQM5200S,$@)" ] || \ 761 { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 762 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 763 } 764 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 765 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ 766 } 767 @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc 768 769uc101_config: unconfig 770 @$(MKCONFIG) uc101 ppc mpc5xxx uc101 771 772v38b_config: unconfig 773 @$(MKCONFIG) -a v38b ppc mpc5xxx v38b 774 775######################################################################### 776## MPC512x Systems 777######################################################################### 778 779ads5121_config \ 780ads5121_rev2_config \ 781 : unconfig 782 @mkdir -p $(obj)include 783 @if [ "$(findstring rev2,$@)" ] ; then \ 784 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ 785 fi 786 @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121 787 788 789######################################################################### 790## MPC8xx Systems 791######################################################################### 792 793Adder_config \ 794Adder87x_config \ 795AdderII_config \ 796 : unconfig 797 @mkdir -p $(obj)include 798 $(if $(findstring AdderII,$@), \ 799 @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) 800 @$(MKCONFIG) -a Adder ppc mpc8xx adder 801 802AdderUSB_config: unconfig 803 @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder 804 805ADS860_config \ 806FADS823_config \ 807FADS850SAR_config \ 808MPC86xADS_config \ 809MPC885ADS_config \ 810FADS860T_config: unconfig 811 @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads 812 813AMX860_config : unconfig 814 @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel 815 816c2mon_config: unconfig 817 @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon 818 819CCM_config: unconfig 820 @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens 821 822cogent_mpc8xx_config: unconfig 823 @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent 824 825ELPT860_config: unconfig 826 @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX 827 828EP88x_config: unconfig 829 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x 830 831ESTEEM192E_config: unconfig 832 @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e 833 834ETX094_config : unconfig 835 @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 836 837FLAGADM_config: unconfig 838 @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm 839 840xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 841 842GEN860T_SC_config \ 843GEN860T_config: unconfig 844 @mkdir -p $(obj)include 845 @[ -z "$(findstring _SC,$@)" ] || \ 846 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ 847 $(XECHO) "With reduced H/W feature set (SC)..." ; \ 848 } 849 @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 850 851GENIETV_config: unconfig 852 @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv 853 854GTH_config: unconfig 855 @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth 856 857hermes_config : unconfig 858 @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes 859 860HMI10_config : unconfig 861 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 862 863IAD210_config: unconfig 864 @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens 865 866xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 867 868ICU862_100MHz_config \ 869ICU862_config: unconfig 870 @mkdir -p $(obj)include 871 @[ -z "$(findstring _100MHz,$@)" ] || \ 872 { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ 873 $(XECHO) "... with 100MHz system clock" ; \ 874 } 875 @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 876 877IP860_config : unconfig 878 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 879 880IVML24_256_config \ 881IVML24_128_config \ 882IVML24_config: unconfig 883 @mkdir -p $(obj)include 884 @[ -z "$(findstring IVML24_config,$@)" ] || \ 885 { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ 886 } 887 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 888 { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ 889 } 890 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 891 { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ 892 } 893 @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm 894 895IVMS8_256_config \ 896IVMS8_128_config \ 897IVMS8_config: unconfig 898 @mkdir -p $(obj)include 899 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 900 { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ 901 } 902 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 903 { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ 904 } 905 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 906 { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ 907 } 908 @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm 909 910KUP4K_config : unconfig 911 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup 912 913KUP4X_config : unconfig 914 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup 915 916LANTEC_config : unconfig 917 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec 918 919lwmon_config: unconfig 920 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon 921 922MBX_config \ 923MBX860T_config: unconfig 924 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx 925 926mgsuvd_config: unconfig 927 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile 928 929MHPC_config: unconfig 930 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec 931 932xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 933 934NETVIA_V2_config \ 935NETVIA_config: unconfig 936 @mkdir -p $(obj)include 937 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 938 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ 939 $(XECHO) "... Version 1" ; \ 940 } 941 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 942 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ 943 $(XECHO) "... Version 2" ; \ 944 } 945 @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 946 947xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 948 949NETPHONE_V2_config \ 950NETPHONE_config: unconfig 951 @mkdir -p $(obj)include 952 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 953 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ 954 } 955 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 956 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ 957 } 958 @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 959 960xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 961 962NETTA_ISDN_6412_SWAPHOOK_config \ 963NETTA_ISDN_SWAPHOOK_config \ 964NETTA_6412_SWAPHOOK_config \ 965NETTA_SWAPHOOK_config \ 966NETTA_ISDN_6412_config \ 967NETTA_ISDN_config \ 968NETTA_6412_config \ 969NETTA_config: unconfig 970 @mkdir -p $(obj)include 971 @[ -z "$(findstring ISDN_,$@)" ] || \ 972 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ 973 } 974 @[ -n "$(findstring ISDN_,$@)" ] || \ 975 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ 976 } 977 @[ -z "$(findstring 6412_,$@)" ] || \ 978 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ 979 } 980 @[ -n "$(findstring 6412_,$@)" ] || \ 981 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ 982 } 983 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 984 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ 985 } 986 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 987 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ 988 } 989 @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta 990 991xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 992 993NETTA2_V2_config \ 994NETTA2_config: unconfig 995 @mkdir -p $(obj)include 996 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 997 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ 998 } 999 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 1000 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ 1001 } 1002 @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 1003 1004NC650_Rev1_config \ 1005NC650_Rev2_config \ 1006CP850_config: unconfig 1007 @mkdir -p $(obj)include 1008 @[ -z "$(findstring CP850,$@)" ] || \ 1009 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ 1010 echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1011 } 1012 @[ -z "$(findstring Rev1,$@)" ] || \ 1013 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ 1014 } 1015 @[ -z "$(findstring Rev2,$@)" ] || \ 1016 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1017 } 1018 @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 1019 1020NX823_config: unconfig 1021 @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 1022 1023pcu_e_config: unconfig 1024 @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens 1025 1026QS850_config: unconfig 1027 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1028 1029QS823_config: unconfig 1030 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1031 1032QS860T_config: unconfig 1033 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc 1034 1035quantum_config: unconfig 1036 @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum 1037 1038R360MPI_config: unconfig 1039 @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi 1040 1041RBC823_config: unconfig 1042 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 1043 1044RPXClassic_config: unconfig 1045 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic 1046 1047RPXlite_config: unconfig 1048 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite 1049 1050RPXlite_DW_64_config \ 1051RPXlite_DW_LCD_config \ 1052RPXlite_DW_64_LCD_config \ 1053RPXlite_DW_NVRAM_config \ 1054RPXlite_DW_NVRAM_64_config \ 1055RPXlite_DW_NVRAM_LCD_config \ 1056RPXlite_DW_NVRAM_64_LCD_config \ 1057RPXlite_DW_config: unconfig 1058 @mkdir -p $(obj)include 1059 @[ -z "$(findstring _64,$@)" ] || \ 1060 { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ 1061 $(XECHO) "... with 64MHz system clock ..."; \ 1062 } 1063 @[ -z "$(findstring _LCD,$@)" ] || \ 1064 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1065 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1066 $(XECHO) "... with LCD display ..."; \ 1067 } 1068 @[ -z "$(findstring _NVRAM,$@)" ] || \ 1069 { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ 1070 $(XECHO) "... with ENV in NVRAM ..."; \ 1071 } 1072 @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw 1073 1074rmu_config: unconfig 1075 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu 1076 1077RRvision_config: unconfig 1078 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision 1079 1080RRvision_LCD_config: unconfig 1081 @mkdir -p $(obj)include 1082 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1083 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1084 @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision 1085 1086SM850_config : unconfig 1087 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 1088 1089spc1920_config: unconfig 1090 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 1091 1092SPD823TS_config: unconfig 1093 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx 1094 1095stxxtc_config: unconfig 1096 @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc 1097 1098svm_sc8xx_config: unconfig 1099 @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx 1100 1101SXNI855T_config: unconfig 1102 @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet 1103 1104# EMK MPC8xx based modules 1105TOP860_config: unconfig 1106 @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk 1107 1108# Play some tricks for configuration selection 1109# Only 855 and 860 boards may come with FEC 1110# and only 823 boards may have LCD support 1111xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 1112 1113FPS850L_config \ 1114FPS860L_config \ 1115NSCU_config \ 1116TQM823L_config \ 1117TQM823L_LCD_config \ 1118TQM850L_config \ 1119TQM855L_config \ 1120TQM860L_config \ 1121TQM862L_config \ 1122TQM823M_config \ 1123TQM850M_config \ 1124TQM855M_config \ 1125TQM860M_config \ 1126TQM862M_config \ 1127TQM866M_config \ 1128TQM885D_config \ 1129TK885D_config \ 1130virtlab2_config: unconfig 1131 @mkdir -p $(obj)include 1132 @[ -z "$(findstring _LCD,$@)" ] || \ 1133 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1134 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1135 $(XECHO) "... with LCD display" ; \ 1136 } 1137 @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc 1138 1139TTTech_config: unconfig 1140 @mkdir -p $(obj)include 1141 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1142 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1143 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1144 1145uc100_config : unconfig 1146 @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 1147 1148v37_config: unconfig 1149 @mkdir -p $(obj)include 1150 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1151 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h 1152 @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 1153 1154wtk_config: unconfig 1155 @mkdir -p $(obj)include 1156 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1157 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h 1158 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1159 1160######################################################################### 1161## PPC4xx Systems 1162######################################################################### 1163xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 1164 1165acadia_config: unconfig 1166 @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc 1167 1168acadia_nand_config: unconfig 1169 @mkdir -p $(obj)include $(obj)board/amcc/acadia 1170 @mkdir -p $(obj)nand_spl/board/amcc/acadia 1171 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1172 @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc 1173 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp 1174 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1175 1176ADCIOP_config: unconfig 1177 @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd 1178 1179alpr_config: unconfig 1180 @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive 1181 1182AP1000_config:unconfig 1183 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix 1184 1185APC405_config: unconfig 1186 @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd 1187 1188AR405_config: unconfig 1189 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd 1190 1191ASH405_config: unconfig 1192 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd 1193 1194bamboo_config: unconfig 1195 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc 1196 1197bamboo_nand_config: unconfig 1198 @mkdir -p $(obj)include $(obj)board/amcc/bamboo 1199 @mkdir -p $(obj)nand_spl/board/amcc/bamboo 1200 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1201 @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc 1202 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp 1203 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1204 1205bubinga_config: unconfig 1206 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc 1207 1208CANBT_config: unconfig 1209 @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd 1210 1211# Arches, Canyonlands & Glacier use different U-Boot images 1212arches_config \ 1213canyonlands_config \ 1214glacier_config: unconfig 1215 @mkdir -p $(obj)include 1216 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1217 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1218 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1219 1220canyonlands_nand_config \ 1221glacier_nand_config: unconfig 1222 @mkdir -p $(obj)include $(obj)board/amcc/canyonlands 1223 @mkdir -p $(obj)nand_spl/board/amcc/canyonlands 1224 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1225 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ 1226 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1227 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1228 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp 1229 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1230 1231CATcenter_config \ 1232CATcenter_25_config \ 1233CATcenter_33_config: unconfig 1234 @mkdir -p $(obj)include 1235 @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h 1236 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h 1237 @[ -z "$(findstring _25,$@)" ] || \ 1238 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ 1239 $(XECHO) "SysClk = 25MHz" ; \ 1240 } 1241 @[ -z "$(findstring _33,$@)" ] || \ 1242 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ 1243 $(XECHO) "SysClk = 33MHz" ; \ 1244 } 1245 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1246 1247CMS700_config: unconfig 1248 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd 1249 1250CPCI2DP_config: unconfig 1251 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd 1252 1253CPCI405_config: unconfig 1254 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1255 1256CPCI4052_config \ 1257CPCI405DT_config \ 1258CPCI405AB_config: unconfig 1259 @mkdir -p $(obj)board/esd/cpci405 1260 @echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp 1261 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1262 1263CPCIISER4_config: unconfig 1264 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd 1265 1266CRAYL1_config: unconfig 1267 @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray 1268 1269csb272_config: unconfig 1270 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 1271 1272csb472_config: unconfig 1273 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 1274 1275DASA_SIM_config: unconfig 1276 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd 1277 1278DP405_config: unconfig 1279 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd 1280 1281DU405_config: unconfig 1282 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd 1283 1284DU440_config: unconfig 1285 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd 1286 1287ebony_config: unconfig 1288 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc 1289 1290ERIC_config: unconfig 1291 @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric 1292 1293EXBITGEN_config: unconfig 1294 @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen 1295 1296fx12mm_flash_config: unconfig 1297 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1298 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1299 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1300 > $(obj)board/avnet/fx12mm/config.tmp 1301 @echo "TEXT_BASE := 0xFFCB0000" \ 1302 >> $(obj)board/avnet/fx12mm/config.tmp 1303 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1304 1305fx12mm_config: unconfig 1306 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1307 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1308 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1309 > $(obj)board/avnet/fx12mm/config.tmp 1310 @echo "TEXT_BASE := 0x03000000" \ 1311 >> $(obj)board/avnet/fx12mm/config.tmp 1312 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1313 1314G2000_config: unconfig 1315 @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 1316 1317hcu4_config: unconfig 1318 @mkdir -p $(obj)board/netstal/common 1319 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal 1320 1321hcu5_config: unconfig 1322 @mkdir -p $(obj)board/netstal/common 1323 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal 1324 1325HH405_config: unconfig 1326 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd 1327 1328HUB405_config: unconfig 1329 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd 1330 1331JSE_config: unconfig 1332 @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse 1333 1334KAREF_config: unconfig 1335 @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst 1336 1337katmai_config: unconfig 1338 @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc 1339 1340# Kilauea & Haleakala images are identical (recognized via PVR) 1341kilauea_config \ 1342haleakala_config: unconfig 1343 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1344 1345kilauea_nand_config \ 1346haleakala_nand_config: unconfig 1347 @mkdir -p $(obj)include $(obj)board/amcc/kilauea 1348 @mkdir -p $(obj)nand_spl/board/amcc/kilauea 1349 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1350 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1351 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp 1352 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1353 1354korat_config: unconfig 1355 @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat 1356 1357luan_config: unconfig 1358 @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc 1359 1360lwmon5_config: unconfig 1361 @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 1362 1363makalu_config: unconfig 1364 @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc 1365 1366mcu25_config: unconfig 1367 @mkdir -p $(obj)board/netstal/common 1368 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal 1369 1370METROBOX_config: unconfig 1371 @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst 1372 1373MIP405_config: unconfig 1374 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl 1375 1376MIP405T_config: unconfig 1377 @mkdir -p $(obj)include 1378 @echo "#define CONFIG_MIP405T" >$(obj)include/config.h 1379 @$(XECHO) "Enable subset config for MIP405T" 1380 @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl 1381 1382ML2_config: unconfig 1383 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 1384 1385ml300_config: unconfig 1386 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx 1387 1388ml507_flash_config: unconfig 1389 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1390 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1391 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1392 > $(obj)board/xilinx/ml507/config.tmp 1393 @echo "TEXT_BASE := 0xFE360000" \ 1394 >> $(obj)board/xilinx/ml507/config.tmp 1395 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1396 1397ml507_config: unconfig 1398 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1399 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1400 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1401 > $(obj)board/xilinx/ml507/config.tmp 1402 @echo "TEXT_BASE := 0x04000000" \ 1403 >> $(obj)board/xilinx/ml507/config.tmp 1404 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1405 1406neo_config: unconfig 1407 @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys 1408 1409ocotea_config: unconfig 1410 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc 1411 1412OCRTC_config \ 1413ORSG_config: unconfig 1414 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd 1415 1416p3p440_config: unconfig 1417 @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive 1418 1419PCI405_config: unconfig 1420 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd 1421 1422pcs440ep_config: unconfig 1423 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep 1424 1425PIP405_config: unconfig 1426 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl 1427 1428PLU405_config: unconfig 1429 @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd 1430 1431PMC405_config: unconfig 1432 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd 1433 1434PMC440_config: unconfig 1435 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd 1436 1437PPChameleonEVB_config \ 1438PPChameleonEVB_BA_25_config \ 1439PPChameleonEVB_ME_25_config \ 1440PPChameleonEVB_HI_25_config \ 1441PPChameleonEVB_BA_33_config \ 1442PPChameleonEVB_ME_33_config \ 1443PPChameleonEVB_HI_33_config: unconfig 1444 @mkdir -p $(obj)include 1445 @[ -z "$(findstring EVB_BA,$@)" ] || \ 1446 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ 1447 $(XECHO) "... BASIC model" ; \ 1448 } 1449 @[ -z "$(findstring EVB_ME,$@)" ] || \ 1450 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ 1451 $(XECHO) "... MEDIUM model" ; \ 1452 } 1453 @[ -z "$(findstring EVB_HI,$@)" ] || \ 1454 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ 1455 $(XECHO) "... HIGH-END model" ; \ 1456 } 1457 @[ -z "$(findstring _25,$@)" ] || \ 1458 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ 1459 $(XECHO) "SysClk = 25MHz" ; \ 1460 } 1461 @[ -z "$(findstring _33,$@)" ] || \ 1462 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ 1463 $(XECHO) "SysClk = 33MHz" ; \ 1464 } 1465 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1466 1467quad100hd_config: unconfig 1468 @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd 1469 1470redwood_config: unconfig 1471 @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc 1472 1473sbc405_config: unconfig 1474 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 1475 1476sc3_config:unconfig 1477 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 1478 1479sequoia_config \ 1480rainier_config: unconfig 1481 @mkdir -p $(obj)include 1482 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1483 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1484 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1485 1486sequoia_nand_config \ 1487rainier_nand_config: unconfig 1488 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1489 @mkdir -p $(obj)nand_spl/board/amcc/sequoia 1490 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1491 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1492 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1493 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1494 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1495 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1496 1497taihu_config: unconfig 1498 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc 1499 1500taishan_config: unconfig 1501 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc 1502 1503v5fx30teval_config: unconfig 1504 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1505 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1506 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1507 > $(obj)board/avnet/v5fx30teval/config.tmp 1508 @echo "TEXT_BASE := 0x03000000" \ 1509 >> $(obj)board/avnet/v5fx30teval/config.tmp 1510 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1511 1512v5fx30teval_flash_config: unconfig 1513 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1514 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1515 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1516 > $(obj)board/avnet/v5fx30teval/config.tmp 1517 @echo "TEXT_BASE := 0xFF1C0000" \ 1518 >> $(obj)board/avnet/v5fx30teval/config.tmp 1519 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1520 1521VOH405_config: unconfig 1522 @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd 1523 1524VOM405_config: unconfig 1525 @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd 1526 1527W7OLMC_config \ 1528W7OLMG_config: unconfig 1529 @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o 1530 1531# Walnut & Sycamore images are identical (recognized via PVR) 1532walnut_config \ 1533sycamore_config: unconfig 1534 @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc 1535 1536WUH405_config: unconfig 1537 @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd 1538 1539xilinx-ppc405-generic_flash_config: unconfig 1540 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1541 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1542 > $(obj)board/xilinx/ppc405-generic/config.tmp 1543 @echo "TEXT_BASE := 0xFE360000" \ 1544 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1545 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1546 1547xilinx-ppc405-generic_config: unconfig 1548 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1549 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1550 > $(obj)board/xilinx/ppc405-generic/config.tmp 1551 @echo "TEXT_BASE := 0x04000000" \ 1552 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1553 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1554 1555xilinx-ppc440-generic_flash_config: unconfig 1556 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1557 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1558 > $(obj)board/xilinx/ppc440-generic/config.tmp 1559 @echo "TEXT_BASE := 0xFE360000" \ 1560 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1561 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1562 1563xilinx-ppc440-generic_config: unconfig 1564 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1565 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1566 > $(obj)board/xilinx/ppc440-generic/config.tmp 1567 @echo "TEXT_BASE := 0x04000000" \ 1568 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1569 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1570 1571XPEDITE1K_config: unconfig 1572 @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k 1573 1574yosemite_config \ 1575yellowstone_config: unconfig 1576 @mkdir -p $(obj)include 1577 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1578 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1579 @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc 1580 1581yucca_config: unconfig 1582 @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc 1583 1584zeus_config: unconfig 1585 @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus 1586 1587######################################################################### 1588## MPC8220 Systems 1589######################################################################### 1590 1591Alaska8220_config \ 1592Yukon8220_config: unconfig 1593 @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska 1594 1595sorcery_config: unconfig 1596 @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery 1597 1598######################################################################### 1599## MPC824x Systems 1600######################################################################### 1601xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1602 1603A3000_config: unconfig 1604 @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 1605 1606barco_config: unconfig 1607 @$(MKCONFIG) $(@:_config=) ppc mpc824x barco 1608 1609BMW_config: unconfig 1610 @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw 1611 1612CPC45_config \ 1613CPC45_ROMBOOT_config: unconfig 1614 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 1615 @cd $(obj)include ; \ 1616 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1617 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1618 $(XECHO) "... booting from 8-bit flash" ; \ 1619 else \ 1620 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1621 $(XECHO) "... booting from 64-bit flash" ; \ 1622 fi; \ 1623 echo "export CONFIG_BOOT_ROM" >> config.mk; 1624 1625CU824_config: unconfig 1626 @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 1627 1628debris_config: unconfig 1629 @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin 1630 1631eXalion_config: unconfig 1632 @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion 1633 1634HIDDEN_DRAGON_config: unconfig 1635 @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon 1636 1637kvme080_config: unconfig 1638 @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin 1639 1640# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as 1641# time permits. 1642#linkstation_HDLAN_config \ 1643# Remove this line when HDLAN is fixed 1644linkstation_HGLAN_config: unconfig 1645 @mkdir -p $(obj)include 1646 @case $@ in \ 1647 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ 1648 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ 1649 esac 1650 @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation 1651 1652MOUSSE_config: unconfig 1653 @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse 1654 1655MUSENKI_config: unconfig 1656 @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki 1657 1658MVBLUE_config: unconfig 1659 @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue 1660 1661OXC_config: unconfig 1662 @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc 1663 1664PN62_config: unconfig 1665 @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 1666 1667Sandpoint8240_config: unconfig 1668 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1669 1670Sandpoint8245_config: unconfig 1671 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1672 1673sbc8240_config: unconfig 1674 @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 1675 1676SL8245_config: unconfig 1677 @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 1678 1679utx8245_config: unconfig 1680 @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 1681 1682######################################################################### 1683## MPC8260 Systems 1684######################################################################### 1685 1686atc_config: unconfig 1687 @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc 1688 1689cogent_mpc8260_config: unconfig 1690 @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent 1691 1692CPU86_config \ 1693CPU86_ROMBOOT_config: unconfig 1694 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 1695 @cd $(obj)include ; \ 1696 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1697 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1698 $(XECHO) "... booting from 8-bit flash" ; \ 1699 else \ 1700 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1701 $(XECHO) "... booting from 64-bit flash" ; \ 1702 fi; \ 1703 echo "export CONFIG_BOOT_ROM" >> config.mk; 1704 1705CPU87_config \ 1706CPU87_ROMBOOT_config: unconfig 1707 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 1708 @cd $(obj)include ; \ 1709 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1710 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1711 $(XECHO) "... booting from 8-bit flash" ; \ 1712 else \ 1713 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1714 $(XECHO) "... booting from 64-bit flash" ; \ 1715 fi; \ 1716 echo "export CONFIG_BOOT_ROM" >> config.mk; 1717 1718ep8248_config \ 1719ep8248E_config : unconfig 1720 @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 1721 1722ep8260_config: unconfig 1723 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 1724 1725ep82xxm_config: unconfig 1726 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm 1727 1728gw8260_config: unconfig 1729 @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 1730 1731hymod_config: unconfig 1732 @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod 1733 1734IDS8247_config: unconfig 1735 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 1736 1737IPHASE4539_config: unconfig 1738 @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 1739 1740ISPAN_config \ 1741ISPAN_REVB_config: unconfig 1742 @mkdir -p $(obj)include 1743 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1744 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ 1745 fi 1746 @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan 1747 1748mgcoge_config : unconfig 1749 @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile 1750 1751MPC8260ADS_config \ 1752MPC8260ADS_lowboot_config \ 1753MPC8260ADS_33MHz_config \ 1754MPC8260ADS_33MHz_lowboot_config \ 1755MPC8260ADS_40MHz_config \ 1756MPC8260ADS_40MHz_lowboot_config \ 1757MPC8272ADS_config \ 1758MPC8272ADS_lowboot_config \ 1759PQ2FADS_config \ 1760PQ2FADS_lowboot_config \ 1761PQ2FADS-VR_config \ 1762PQ2FADS-VR_lowboot_config \ 1763PQ2FADS-ZU_config \ 1764PQ2FADS-ZU_lowboot_config \ 1765PQ2FADS-ZU_66MHz_config \ 1766PQ2FADS-ZU_66MHz_lowboot_config \ 1767 : unconfig 1768 @mkdir -p $(obj)include 1769 @mkdir -p $(obj)board/freescale/mpc8260ads 1770 $(if $(findstring PQ2FADS,$@), \ 1771 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ 1772 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) 1773 $(if $(findstring MHz,$@), \ 1774 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ 1775 $(if $(findstring VR,$@), \ 1776 @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) 1777 @[ -z "$(findstring lowboot_,$@)" ] || \ 1778 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ 1779 $(XECHO) "... with lowboot configuration" ; \ 1780 } 1781 @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale 1782 1783MPC8266ADS_config: unconfig 1784 @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale 1785 1786muas3001_dev_config \ 1787muas3001_config : unconfig 1788 @mkdir -p $(obj)include 1789 @mkdir -p $(obj)board/muas3001 1790 @if [ "$(findstring dev,$@)" ] ; then \ 1791 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ 1792 fi 1793 @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 1794 1795# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1796PM825_config \ 1797PM825_ROMBOOT_config \ 1798PM825_BIGFLASH_config \ 1799PM825_ROMBOOT_BIGFLASH_config \ 1800PM826_config \ 1801PM826_ROMBOOT_config \ 1802PM826_BIGFLASH_config \ 1803PM826_ROMBOOT_BIGFLASH_config: unconfig 1804 @mkdir -p $(obj)include 1805 @mkdir -p $(obj)board/pm826 1806 @if [ "$(findstring PM825_,$@)" ] ; then \ 1807 echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ 1808 else \ 1809 >$(obj)include/config.h ; \ 1810 fi 1811 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1812 $(XECHO) "... booting from 8-bit flash" ; \ 1813 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1814 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1815 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1816 $(XECHO) "... with 32 MB Flash" ; \ 1817 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1818 fi; \ 1819 else \ 1820 $(XECHO) "... booting from 64-bit flash" ; \ 1821 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1822 $(XECHO) "... with 32 MB Flash" ; \ 1823 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1824 echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ 1825 else \ 1826 echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ 1827 fi; \ 1828 fi 1829 @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 1830 1831PM828_config \ 1832PM828_PCI_config \ 1833PM828_ROMBOOT_config \ 1834PM828_ROMBOOT_PCI_config: unconfig 1835 @mkdir -p $(obj)include 1836 @mkdir -p $(obj)board/pm826 1837 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1838 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 1839 $(XECHO) "... with PCI enabled" ; \ 1840 fi 1841 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1842 $(XECHO) "... booting from 8-bit flash" ; \ 1843 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1844 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1845 fi 1846 @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 1847 1848ppmc8260_config: unconfig 1849 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 1850 1851Rattler8248_config \ 1852Rattler_config: unconfig 1853 @mkdir -p $(obj)include 1854 $(if $(findstring 8248,$@), \ 1855 @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) 1856 @$(MKCONFIG) -a Rattler ppc mpc8260 rattler 1857 1858RPXsuper_config: unconfig 1859 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper 1860 1861rsdproto_config: unconfig 1862 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto 1863 1864sacsng_config: unconfig 1865 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng 1866 1867sbc8260_config: unconfig 1868 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 1869 1870SCM_config: unconfig 1871 @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens 1872 1873TQM8255_AA_config \ 1874TQM8260_AA_config \ 1875TQM8260_AB_config \ 1876TQM8260_AC_config \ 1877TQM8260_AD_config \ 1878TQM8260_AE_config \ 1879TQM8260_AF_config \ 1880TQM8260_AG_config \ 1881TQM8260_AH_config \ 1882TQM8260_AI_config \ 1883TQM8265_AA_config: unconfig 1884 @mkdir -p $(obj)include 1885 @case "$@" in \ 1886 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1887 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1888 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1889 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1890 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1891 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1892 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1893 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1894 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1895 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1896 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1897 esac; \ 1898 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1899 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ 1900 fi; \ 1901 echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ 1902 echo "... with $${CFREQ}MHz system clock" ; \ 1903 if [ "$${CACHE}" = "yes" ] ; then \ 1904 echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1905 $(XECHO) "... with L2 Cache support" ; \ 1906 else \ 1907 echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1908 $(XECHO) "... without L2 Cache support" ; \ 1909 fi; \ 1910 if [ "$${BMODE}" = "60x" ] ; then \ 1911 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1912 $(XECHO) "... with 60x Bus Mode" ; \ 1913 else \ 1914 echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1915 $(XECHO) "... without 60x Bus Mode" ; \ 1916 fi 1917 @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc 1918 1919TQM8272_config: unconfig 1920 @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc 1921 1922VoVPN-GW_66MHz_config \ 1923VoVPN-GW_100MHz_config: unconfig 1924 @mkdir -p $(obj)include 1925 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h 1926 @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 1927 1928ZPC1900_config: unconfig 1929 @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 1930 1931######################################################################### 1932## Coldfire 1933######################################################################### 1934 1935M52277EVB_config \ 1936M52277EVB_spansion_config \ 1937M52277EVB_stmicro_config : unconfig 1938 @case "$@" in \ 1939 M52277EVB_config) FLASH=SPANSION;; \ 1940 M52277EVB_spansion_config) FLASH=SPANSION;; \ 1941 M52277EVB_stmicro_config) FLASH=STMICRO;; \ 1942 esac; \ 1943 if [ "$${FLASH}" = "SPANSION" ] ; then \ 1944 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 1945 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 1946 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ 1947 $(XECHO) "... with SPANSION boot..." ; \ 1948 fi; \ 1949 if [ "$${FLASH}" = "STMICRO" ] ; then \ 1950 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 1951 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 1952 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 1953 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ 1954 $(XECHO) "... with ST Micro boot..." ; \ 1955 fi 1956 @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale 1957 1958M5235EVB_config \ 1959M5235EVB_Flash16_config \ 1960M5235EVB_Flash32_config: unconfig 1961 @case "$@" in \ 1962 M5235EVB_config) FLASH=16;; \ 1963 M5235EVB_Flash16_config) FLASH=16;; \ 1964 M5235EVB_Flash32_config) FLASH=32;; \ 1965 esac; \ 1966 if [ "$${FLASH}" != "16" ] ; then \ 1967 echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ 1968 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 1969 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 1970 else \ 1971 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 1972 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 1973 fi 1974 @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale 1975 1976M5249EVB_config : unconfig 1977 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale 1978 1979M5253DEMO_config : unconfig 1980 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale 1981 1982M5253EVBE_config : unconfig 1983 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale 1984 1985cobra5272_config : unconfig 1986 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 1987 1988EB+MCF-EV123_config : unconfig 1989 @mkdir -p $(obj)include 1990 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 1991 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 1992 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 1993 1994EB+MCF-EV123_internal_config : unconfig 1995 @mkdir -p $(obj)include 1996 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 1997 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 1998 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 1999 2000idmr_config : unconfig 2001 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr 2002 2003M5271EVB_config : unconfig 2004 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale 2005 2006M5272C3_config : unconfig 2007 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale 2008 2009M5275EVB_config : unconfig 2010 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale 2011 2012M5282EVB_config : unconfig 2013 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale 2014 2015M53017EVB_config : unconfig 2016 @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale 2017 2018M5329AFEE_config \ 2019M5329BFEE_config : unconfig 2020 @case "$@" in \ 2021 M5329AFEE_config) NAND=0;; \ 2022 M5329BFEE_config) NAND=16;; \ 2023 esac; \ 2024 if [ "$${NAND}" != "0" ] ; then \ 2025 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2026 fi 2027 @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale 2028 2029M5373EVB_config : unconfig 2030 @case "$@" in \ 2031 M5373EVB_config) NAND=16;; \ 2032 esac; \ 2033 if [ "$${NAND}" != "0" ] ; then \ 2034 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2035 fi 2036 @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale 2037 2038M54451EVB_config \ 2039M54451EVB_spansion_config \ 2040M54451EVB_stmicro_config : unconfig 2041 @case "$@" in \ 2042 M54451EVB_config) FLASH=SPANSION;; \ 2043 M54451EVB_spansion_config) FLASH=SPANSION;; \ 2044 M54451EVB_stmicro_config) FLASH=STMICRO;; \ 2045 esac; \ 2046 if [ "$${FLASH}" = "SPANSION" ] ; then \ 2047 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 2048 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2049 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2050 $(XECHO) "... with SPANSION boot..." ; \ 2051 fi; \ 2052 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2053 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2054 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2055 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2056 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2057 $(XECHO) "... with ST Micro boot..." ; \ 2058 fi; \ 2059 echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; 2060 @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale 2061 2062M54455EVB_config \ 2063M54455EVB_atmel_config \ 2064M54455EVB_intel_config \ 2065M54455EVB_a33_config \ 2066M54455EVB_a66_config \ 2067M54455EVB_i33_config \ 2068M54455EVB_i66_config \ 2069M54455EVB_stm33_config : unconfig 2070 @case "$@" in \ 2071 M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ 2072 M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ 2073 M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ 2074 M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ 2075 M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ 2076 M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ 2077 M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ 2078 M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ 2079 esac; \ 2080 if [ "$${FLASH}" = "INTEL" ] ; then \ 2081 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ 2082 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2083 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2084 $(XECHO) "... with INTEL boot..." ; \ 2085 fi; \ 2086 if [ "$${FLASH}" = "ATMEL" ] ; then \ 2087 echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ 2088 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2089 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2090 $(XECHO) "... with ATMEL boot..." ; \ 2091 fi; \ 2092 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2093 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2094 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2095 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2096 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2097 $(XECHO) "... with ST Micro boot..." ; \ 2098 fi; \ 2099 echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ 2100 $(XECHO) "... with $${FREQ}Hz input clock" 2101 @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale 2102 2103M5475AFE_config \ 2104M5475BFE_config \ 2105M5475CFE_config \ 2106M5475DFE_config \ 2107M5475EFE_config \ 2108M5475FFE_config \ 2109M5475GFE_config : unconfig 2110 @case "$@" in \ 2111 M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2112 M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2113 M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2114 M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2115 M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2116 M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2117 M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2118 esac; \ 2119 echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ 2120 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2121 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2122 if [ "$${RAM1}" != "0" ] ; then \ 2123 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2124 fi; \ 2125 if [ "$${CODE}" != "0" ] ; then \ 2126 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2127 fi; \ 2128 if [ "$${VID}" == "1" ] ; then \ 2129 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2130 fi; \ 2131 if [ "$${USB}" == "1" ] ; then \ 2132 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2133 fi 2134 @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale 2135 2136M5485AFE_config \ 2137M5485BFE_config \ 2138M5485CFE_config \ 2139M5485DFE_config \ 2140M5485EFE_config \ 2141M5485FFE_config \ 2142M5485GFE_config \ 2143M5485HFE_config : unconfig 2144 @case "$@" in \ 2145 M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2146 M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2147 M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2148 M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2149 M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2150 M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2151 M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2152 M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ 2153 esac; \ 2154 echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ 2155 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2156 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2157 if [ "$${RAM1}" != "0" ] ; then \ 2158 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2159 fi; \ 2160 if [ "$${CODE}" != "0" ] ; then \ 2161 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2162 fi; \ 2163 if [ "$${VID}" == "1" ] ; then \ 2164 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2165 fi; \ 2166 if [ "$${USB}" == "1" ] ; then \ 2167 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2168 fi 2169 @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale 2170 2171TASREG_config : unconfig 2172 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd 2173 2174######################################################################### 2175## MPC83xx Systems 2176######################################################################### 2177 2178MPC8313ERDB_33_config \ 2179MPC8313ERDB_66_config \ 2180MPC8313ERDB_NAND_33_config \ 2181MPC8313ERDB_NAND_66_config: unconfig 2182 @mkdir -p $(obj)include 2183 @mkdir -p $(obj)board/freescale/mpc8313erdb 2184 @if [ "$(findstring _33_,$@)" ] ; then \ 2185 $(XECHO) -n "...33M ..." ; \ 2186 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ 2187 fi ; \ 2188 if [ "$(findstring _66_,$@)" ] ; then \ 2189 $(XECHO) -n "...66M..." ; \ 2190 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ 2191 fi ; \ 2192 if [ "$(findstring _NAND_,$@)" ] ; then \ 2193 $(XECHO) -n "...NAND..." ; \ 2194 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ 2195 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ 2196 fi ; 2197 @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale 2198 @if [ "$(findstring _NAND_,$@)" ] ; then \ 2199 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ 2200 fi ; 2201 2202MPC8315ERDB_config: unconfig 2203 @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale 2204 2205MPC8323ERDB_config: unconfig 2206 @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale 2207 2208MPC832XEMDS_config \ 2209MPC832XEMDS_HOST_33_config \ 2210MPC832XEMDS_HOST_66_config \ 2211MPC832XEMDS_SLAVE_config \ 2212MPC832XEMDS_ATM_config: unconfig 2213 @mkdir -p $(obj)include 2214 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2215 $(XECHO) -n "... PCI HOST " ; \ 2216 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2217 fi ; \ 2218 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2219 $(XECHO) "...PCI SLAVE 66M" ; \ 2220 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2221 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2222 fi ; \ 2223 if [ "$(findstring _33_,$@)" ] ; then \ 2224 $(XECHO) -n "...33M ..." ; \ 2225 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2226 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2227 fi ; \ 2228 if [ "$(findstring _66_,$@)" ] ; then \ 2229 $(XECHO) -n "...66M..." ; \ 2230 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2231 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2232 fi ; \ 2233 if [ "$(findstring _ATM_,$@)" ] ; then \ 2234 $(XECHO) -n "...ATM..." ; \ 2235 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2236 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2237 fi ; 2238 @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale 2239 2240MPC8349EMDS_config: unconfig 2241 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale 2242 2243MPC8349ITX_config \ 2244MPC8349ITX_LOWBOOT_config \ 2245MPC8349ITXGP_config: unconfig 2246 @mkdir -p $(obj)include 2247 @mkdir -p $(obj)board/freescale/mpc8349itx 2248 @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h 2249 @if [ "$(findstring GP,$@)" ] ; then \ 2250 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2251 fi 2252 @if [ "$(findstring LOWBOOT,$@)" ] ; then \ 2253 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2254 fi 2255 @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale 2256 2257MPC8360EMDS_config \ 2258MPC8360EMDS_HOST_33_config \ 2259MPC8360EMDS_HOST_66_config \ 2260MPC8360EMDS_SLAVE_config \ 2261MPC8360EMDS_ATM_config: unconfig 2262 @mkdir -p $(obj)include 2263 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2264 $(XECHO) -n "... PCI HOST " ; \ 2265 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2266 fi ; \ 2267 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2268 $(XECHO) "...PCI SLAVE 66M" ; \ 2269 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2270 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2271 fi ; \ 2272 if [ "$(findstring _33_,$@)" ] ; then \ 2273 $(XECHO) -n "...33M ..." ; \ 2274 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2275 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2276 fi ; \ 2277 if [ "$(findstring _66_,$@)" ] ; then \ 2278 $(XECHO) -n "...66M..." ; \ 2279 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2280 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2281 fi ; \ 2282 if [ "$(findstring _ATM_,$@)" ] ; then \ 2283 $(XECHO) -n "...ATM..." ; \ 2284 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2285 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2286 fi ; 2287 @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale 2288 2289MPC8360ERDK_33_config \ 2290MPC8360ERDK_66_config \ 2291MPC8360ERDK_config: unconfig 2292 @mkdir -p $(obj)include 2293 @if [ "$(findstring _33_,$@)" ] ; then \ 2294 $(XECHO) -n "... CLKIN 33MHz " ; \ 2295 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ 2296 fi ; 2297 @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale 2298 2299MPC837XEMDS_config \ 2300MPC837XEMDS_HOST_config: unconfig 2301 @mkdir -p $(obj)include 2302 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2303 $(XECHO) -n "... PCI HOST " ; \ 2304 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2305 fi ; 2306 @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale 2307 2308MPC837XERDB_config: unconfig 2309 @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale 2310 2311MVBLM7_config: unconfig 2312 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision 2313 2314sbc8349_config: unconfig 2315 @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 2316 2317TQM834x_config: unconfig 2318 @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc 2319 2320 2321######################################################################### 2322## MPC85xx Systems 2323######################################################################### 2324 2325ATUM8548_config: unconfig 2326 @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 2327 2328MPC8536DS_config: unconfig 2329 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8536ds freescale 2330 2331MPC8540ADS_config: unconfig 2332 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale 2333 2334MPC8540EVAL_config \ 2335MPC8540EVAL_33_config \ 2336MPC8540EVAL_66_config \ 2337MPC8540EVAL_33_slave_config \ 2338MPC8540EVAL_66_slave_config: unconfig 2339 @mkdir -p $(obj)include 2340 @if [ "$(findstring _33_,$@)" ] ; then \ 2341 $(XECHO) "... 33 MHz PCI" ; \ 2342 else \ 2343 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ 2344 $(XECHO) "... 66 MHz PCI" ; \ 2345 fi ; \ 2346 if [ "$(findstring _slave_,$@)" ] ; then \ 2347 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ 2348 $(XECHO) " slave" ; \ 2349 else \ 2350 $(XECHO) " host" ; \ 2351 fi 2352 @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval 2353 2354MPC8560ADS_config: unconfig 2355 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale 2356 2357MPC8541CDS_legacy_config \ 2358MPC8541CDS_config: unconfig 2359 @mkdir -p $(obj)include 2360 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2361 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2362 $(XECHO) "... legacy" ; \ 2363 fi 2364 @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale 2365 2366MPC8544DS_config: unconfig 2367 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale 2368 2369MPC8548CDS_legacy_config \ 2370MPC8548CDS_config: unconfig 2371 @mkdir -p $(obj)include 2372 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2373 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2374 $(XECHO) "... legacy" ; \ 2375 fi 2376 @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale 2377 2378MPC8555CDS_legacy_config \ 2379MPC8555CDS_config: unconfig 2380 @mkdir -p $(obj)include 2381 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2382 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2383 $(XECHO) "... legacy" ; \ 2384 fi 2385 @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale 2386 2387MPC8568MDS_config: unconfig 2388 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale 2389 2390MPC8572DS_config: unconfig 2391 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale 2392 2393PM854_config: unconfig 2394 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 2395 2396PM856_config: unconfig 2397 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 2398 2399sbc8540_config \ 2400sbc8540_33_config \ 2401sbc8540_66_config: unconfig 2402 @mkdir -p $(obj)include 2403 @if [ "$(findstring _66_,$@)" ] ; then \ 2404 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2405 $(XECHO) "... 66 MHz PCI" ; \ 2406 else \ 2407 $(XECHO) "... 33 MHz PCI" ; \ 2408 fi 2409 @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 2410 2411sbc8548_config: unconfig 2412 @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 2413 2414sbc8560_config \ 2415sbc8560_33_config \ 2416sbc8560_66_config: unconfig 2417 @mkdir -p $(obj)include 2418 @if [ "$(findstring _66_,$@)" ] ; then \ 2419 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2420 $(XECHO) "... 66 MHz PCI" ; \ 2421 else \ 2422 $(XECHO) "... 33 MHz PCI" ; \ 2423 fi 2424 @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 2425 2426socrates_config: unconfig 2427 @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates 2428 2429stxgp3_config: unconfig 2430 @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 2431 2432stxssa_config \ 2433stxssa_4M_config: unconfig 2434 @mkdir -p $(obj)include 2435 @if [ "$(findstring _4M_,$@)" ] ; then \ 2436 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ 2437 $(XECHO) "... with 4 MiB flash memory" ; \ 2438 fi 2439 @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa 2440 2441TQM8540_config \ 2442TQM8541_config \ 2443TQM8548_config \ 2444TQM8555_config \ 2445TQM8560_config: unconfig 2446 @mkdir -p $(obj)include 2447 @CTYPE=$(subst TQM,,$(@:_config=)); \ 2448 $(XECHO) "... TQM"$${CTYPE}; \ 2449 echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ 2450 echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ 2451 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ 2452 echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; 2453 @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc 2454 2455######################################################################### 2456## MPC86xx Systems 2457######################################################################### 2458 2459MPC8610HPCD_config: unconfig 2460 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale 2461 2462MPC8641HPCN_config: unconfig 2463 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale 2464 2465sbc8641d_config: unconfig 2466 @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d 2467 2468######################################################################### 2469## 74xx/7xx Systems 2470######################################################################### 2471 2472AmigaOneG3SE_config: unconfig 2473 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 2474 2475BAB7xx_config: unconfig 2476 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec 2477 2478CPCI750_config: unconfig 2479 @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd 2480 2481DB64360_config: unconfig 2482 @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell 2483 2484DB64460_config: unconfig 2485 @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell 2486 2487ELPPC_config: unconfig 2488 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec 2489 2490EVB64260_config \ 2491EVB64260_750CX_config: unconfig 2492 @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 2493 2494mpc7448hpc2_config: unconfig 2495 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale 2496 2497P3G4_config: unconfig 2498 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2499 2500p3m750_config \ 2501p3m7448_config: unconfig 2502 @mkdir -p $(obj)include 2503 @if [ "$(findstring 750_,$@)" ] ; then \ 2504 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ 2505 else \ 2506 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ 2507 fi 2508 @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive 2509 2510PCIPPC2_config \ 2511PCIPPC6_config: unconfig 2512 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 2513 2514ppmc7xx_config: unconfig 2515 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx 2516 2517ZUMA_config: unconfig 2518 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2519 2520#======================================================================== 2521# ARM 2522#======================================================================== 2523######################################################################### 2524## StrongARM Systems 2525######################################################################### 2526 2527assabet_config : unconfig 2528 @$(MKCONFIG) $(@:_config=) arm sa1100 assabet 2529 2530dnp1110_config : unconfig 2531 @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 2532 2533gcplus_config : unconfig 2534 @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus 2535 2536lart_config : unconfig 2537 @$(MKCONFIG) $(@:_config=) arm sa1100 lart 2538 2539shannon_config : unconfig 2540 @$(MKCONFIG) $(@:_config=) arm sa1100 shannon 2541 2542######################################################################### 2543## ARM92xT Systems 2544######################################################################### 2545 2546######################################################################### 2547## Atmel AT91RM9200 Systems 2548######################################################################### 2549 2550at91rm9200dk_config : unconfig 2551 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 2552 2553at91sam9261ek_config : unconfig 2554 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91 2555 2556at91sam9263ek_config : unconfig 2557 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91 2558 2559at91sam9rlek_config : unconfig 2560 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91 2561 2562cmc_pu2_config : unconfig 2563 @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 2564 2565csb637_config : unconfig 2566 @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 2567 2568kb9202_config : unconfig 2569 @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 2570 2571m501sk_config : unconfig 2572 @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 2573 2574mp2usb_config : unconfig 2575 @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 2576 2577######################################################################### 2578## Atmel ARM926EJ-S Systems 2579######################################################################### 2580 2581at91cap9adk_config : unconfig 2582 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 2583 2584at91sam9260ek_config : unconfig 2585 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91 2586 2587######################################################################## 2588## ARM Integrator boards - see doc/README-integrator for more info. 2589integratorap_config \ 2590ap_config \ 2591ap966_config \ 2592ap922_config \ 2593ap922_XA10_config \ 2594ap7_config \ 2595ap720t_config \ 2596ap920t_config \ 2597ap926ejs_config \ 2598ap946es_config: unconfig 2599 @board/integratorap/split_by_variant.sh $@ 2600 2601integratorcp_config \ 2602cp_config \ 2603cp920t_config \ 2604cp926ejs_config \ 2605cp946es_config \ 2606cp1136_config \ 2607cp966_config \ 2608cp922_config \ 2609cp922_XA10_config \ 2610cp1026_config: unconfig 2611 @board/integratorcp/split_by_variant.sh $@ 2612 2613davinci_dvevm_config : unconfig 2614 @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci 2615 2616davinci_schmoogie_config : unconfig 2617 @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci 2618 2619davinci_sffsdr_config : unconfig 2620 @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci 2621 2622davinci_sonata_config : unconfig 2623 @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci 2624 2625lpd7a400_config \ 2626lpd7a404_config: unconfig 2627 @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x 2628 2629mx1ads_config : unconfig 2630 @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx 2631 2632mx1fs2_config : unconfig 2633 @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx 2634 2635netstar_config: unconfig 2636 @$(MKCONFIG) $(@:_config=) arm arm925t netstar 2637 2638omap1510inn_config : unconfig 2639 @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn 2640 2641xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 2642 2643omap1610inn_config \ 2644omap1610inn_cs0boot_config \ 2645omap1610inn_cs3boot_config \ 2646omap1610inn_cs_autoboot_config \ 2647omap1610h2_config \ 2648omap1610h2_cs0boot_config \ 2649omap1610h2_cs3boot_config \ 2650omap1610h2_cs_autoboot_config: unconfig 2651 @mkdir -p $(obj)include 2652 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2653 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ 2654 $(XECHO) "... configured for CS0 boot"; \ 2655 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 2656 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ 2657 $(XECHO) "... configured for CS_AUTO boot"; \ 2658 else \ 2659 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2660 $(XECHO) "... configured for CS3 boot"; \ 2661 fi; 2662 @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap 2663 2664omap5912osk_config : unconfig 2665 @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap 2666 2667xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 2668 2669omap730p2_config \ 2670omap730p2_cs0boot_config \ 2671omap730p2_cs3boot_config : unconfig 2672 @mkdir -p $(obj)include 2673 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2674 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ 2675 $(XECHO) "... configured for CS0 boot"; \ 2676 else \ 2677 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2678 $(XECHO) "... configured for CS3 boot"; \ 2679 fi; 2680 @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap 2681 2682sbc2410x_config: unconfig 2683 @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 2684 2685scb9328_config : unconfig 2686 @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx 2687 2688smdk2400_config : unconfig 2689 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 2690 2691smdk2410_config : unconfig 2692 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 2693 2694SX1_config : unconfig 2695 @$(MKCONFIG) $(@:_config=) arm arm925t sx1 2696 2697# TRAB default configuration: 8 MB Flash, 32 MB RAM 2698xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 2699 2700trab_config \ 2701trab_bigram_config \ 2702trab_bigflash_config \ 2703trab_old_config: unconfig 2704 @mkdir -p $(obj)include 2705 @mkdir -p $(obj)board/trab 2706 @[ -z "$(findstring _bigram,$@)" ] || \ 2707 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2708 echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ 2709 $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ 2710 } 2711 @[ -z "$(findstring _bigflash,$@)" ] || \ 2712 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ 2713 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2714 $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ 2715 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2716 } 2717 @[ -z "$(findstring _old,$@)" ] || \ 2718 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2719 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2720 $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ 2721 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2722 } 2723 @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 2724 2725VCMA9_config : unconfig 2726 @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 2727 2728######################################################################### 2729# ARM supplied Versatile development boards 2730######################################################################### 2731 2732cm4008_config : unconfig 2733 @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 2734 2735cm41xx_config : unconfig 2736 @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 2737 2738versatile_config \ 2739versatileab_config \ 2740versatilepb_config : unconfig 2741 @board/versatile/split_by_variant.sh $@ 2742 2743voiceblue_config: unconfig 2744 @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue 2745 2746######################################################################### 2747## S3C44B0 Systems 2748######################################################################### 2749 2750B2_config : unconfig 2751 @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave 2752 2753######################################################################### 2754## ARM720T Systems 2755######################################################################### 2756 2757armadillo_config: unconfig 2758 @$(MKCONFIG) $(@:_config=) arm arm720t armadillo 2759 2760ep7312_config : unconfig 2761 @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 2762 2763impa7_config : unconfig 2764 @$(MKCONFIG) $(@:_config=) arm arm720t impa7 2765 2766modnet50_config : unconfig 2767 @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 2768 2769evb4510_config : unconfig 2770 @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 2771 2772lpc2292sodimm_config: unconfig 2773 @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 2774 2775SMN42_config : unconfig 2776 @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 2777 2778######################################################################### 2779## XScale Systems 2780######################################################################### 2781 2782actux1_config : unconfig 2783 @$(MKCONFIG) $(@:_config=) arm ixp actux1 2784 2785actux2_config : unconfig 2786 @$(MKCONFIG) $(@:_config=) arm ixp actux2 2787 2788actux3_config : unconfig 2789 @$(MKCONFIG) $(@:_config=) arm ixp actux3 2790 2791actux4_config : unconfig 2792 @$(MKCONFIG) $(@:_config=) arm ixp actux4 2793 2794cerf250_config : unconfig 2795 @$(MKCONFIG) $(@:_config=) arm pxa cerf250 2796 2797cradle_config : unconfig 2798 @$(MKCONFIG) $(@:_config=) arm pxa cradle 2799 2800csb226_config : unconfig 2801 @$(MKCONFIG) $(@:_config=) arm pxa csb226 2802 2803delta_config : unconfig 2804 @$(MKCONFIG) $(@:_config=) arm pxa delta 2805 2806innokom_config : unconfig 2807 @$(MKCONFIG) $(@:_config=) arm pxa innokom 2808 2809ixdp425_config : unconfig 2810 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 2811 2812ixdpg425_config : unconfig 2813 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 2814 2815lubbock_config : unconfig 2816 @$(MKCONFIG) $(@:_config=) arm pxa lubbock 2817 2818pleb2_config : unconfig 2819 @$(MKCONFIG) $(@:_config=) arm pxa pleb2 2820 2821logodl_config : unconfig 2822 @$(MKCONFIG) $(@:_config=) arm pxa logodl 2823 2824pdnb3_config \ 2825scpu_config: unconfig 2826 @mkdir -p $(obj)include 2827 @if [ "$(findstring scpu_,$@)" ] ; then \ 2828 echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ 2829 $(XECHO) "... on SCPU board variant" ; \ 2830 fi 2831 @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive 2832 2833pxa255_idp_config: unconfig 2834 @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp 2835 2836trizepsiv_config : unconfig 2837 @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv 2838 2839wepep250_config : unconfig 2840 @$(MKCONFIG) $(@:_config=) arm pxa wepep250 2841 2842xaeniax_config : unconfig 2843 @$(MKCONFIG) $(@:_config=) arm pxa xaeniax 2844 2845xm250_config : unconfig 2846 @$(MKCONFIG) $(@:_config=) arm pxa xm250 2847 2848xsengine_config : unconfig 2849 @$(MKCONFIG) $(@:_config=) arm pxa xsengine 2850 2851zylonite_config : 2852 @$(MKCONFIG) $(@:_config=) arm pxa zylonite 2853 2854######################################################################### 2855## ARM1136 Systems 2856######################################################################### 2857 2858apollon_config : unconfig 2859 @mkdir -p $(obj)include 2860 @mkdir -p $(obj)onenand_ipl/board/apollon 2861 @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h 2862 @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx 2863 @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk 2864 2865imx31_litekit_config : unconfig 2866 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 2867 2868imx31_phycore_config : unconfig 2869 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 2870 2871mx31ads_config : unconfig 2872 @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 2873 2874omap2420h4_config : unconfig 2875 @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx 2876 2877######################################################################### 2878## ARM1176 Systems 2879######################################################################### 2880smdk6400_noUSB_config \ 2881smdk6400_config : unconfig 2882 @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 2883 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 2884 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 2885 @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ 2886 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 2887 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 2888 else \ 2889 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 2890 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 2891 fi 2892 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 2893 2894#======================================================================== 2895# i386 2896#======================================================================== 2897######################################################################### 2898## AMD SC520 CDP 2899######################################################################### 2900sc520_cdp_config : unconfig 2901 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp 2902 2903sc520_spunk_config : unconfig 2904 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk 2905 2906sc520_spunk_rel_config : unconfig 2907 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk 2908 2909#======================================================================== 2910# MIPS 2911#======================================================================== 2912######################################################################### 2913## MIPS32 4Kc 2914######################################################################### 2915 2916xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 2917 2918incaip_100MHz_config \ 2919incaip_133MHz_config \ 2920incaip_150MHz_config \ 2921incaip_config: unconfig 2922 @mkdir -p $(obj)include 2923 @[ -z "$(findstring _100MHz,$@)" ] || \ 2924 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ 2925 $(XECHO) "... with 100MHz system clock" ; \ 2926 } 2927 @[ -z "$(findstring _133MHz,$@)" ] || \ 2928 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ 2929 $(XECHO) "... with 133MHz system clock" ; \ 2930 } 2931 @[ -z "$(findstring _150MHz,$@)" ] || \ 2932 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ 2933 $(XECHO) "... with 150MHz system clock" ; \ 2934 } 2935 @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip 2936 2937tb0229_config: unconfig 2938 @$(MKCONFIG) $(@:_config=) mips mips tb0229 2939 2940######################################################################### 2941## MIPS32 AU1X00 2942######################################################################### 2943 2944dbau1000_config : unconfig 2945 @mkdir -p $(obj)include 2946 @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h 2947 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2948 2949dbau1100_config : unconfig 2950 @mkdir -p $(obj)include 2951 @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h 2952 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2953 2954dbau1500_config : unconfig 2955 @mkdir -p $(obj)include 2956 @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h 2957 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2958 2959dbau1550_config : unconfig 2960 @mkdir -p $(obj)include 2961 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 2962 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2963 2964dbau1550_el_config : unconfig 2965 @mkdir -p $(obj)include 2966 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 2967 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2968 2969gth2_config : unconfig 2970 @mkdir -p $(obj)include 2971 @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h 2972 @$(MKCONFIG) -a gth2 mips mips gth2 2973 2974pb1000_config : unconfig 2975 @mkdir -p $(obj)include 2976 @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h 2977 @$(MKCONFIG) -a pb1x00 mips mips pb1x00 2978 2979qemu_mips_config : unconfig 2980 @mkdir -p $(obj)include 2981 @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h 2982 @$(MKCONFIG) -a qemu-mips mips mips qemu-mips 2983 2984######################################################################### 2985## MIPS64 5Kc 2986######################################################################### 2987 2988purple_config : unconfig 2989 @$(MKCONFIG) $(@:_config=) mips mips purple 2990 2991#======================================================================== 2992# Nios 2993#======================================================================== 2994######################################################################### 2995## Nios32 2996######################################################################### 2997 2998ADNPESC1_DNPEVA2_base_32_config \ 2999ADNPESC1_base_32_config \ 3000ADNPESC1_config: unconfig 3001 @mkdir -p $(obj)include 3002 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 3003 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ 3004 $(XECHO) "... DNP/EVA2 configuration" ; \ 3005 } 3006 @[ -z "$(findstring _base_32,$@)" ] || \ 3007 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3008 $(XECHO) "... NIOS 'base_32' configuration" ; \ 3009 } 3010 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 3011 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3012 $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ 3013 } 3014 @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv 3015 3016DK1C20_safe_32_config \ 3017DK1C20_standard_32_config \ 3018DK1C20_config: unconfig 3019 @mkdir -p $(obj)include 3020 @[ -z "$(findstring _safe_32,$@)" ] || \ 3021 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3022 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3023 } 3024 @[ -z "$(findstring _standard_32,$@)" ] || \ 3025 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3026 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3027 } 3028 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 3029 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3030 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3031 } 3032 @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera 3033 3034DK1S10_safe_32_config \ 3035DK1S10_standard_32_config \ 3036DK1S10_mtx_ldk_20_config \ 3037DK1S10_config: unconfig 3038 @mkdir -p $(obj)include 3039 @[ -z "$(findstring _safe_32,$@)" ] || \ 3040 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3041 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3042 } 3043 @[ -z "$(findstring _standard_32,$@)" ] || \ 3044 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3045 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3046 } 3047 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 3048 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ 3049 $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ 3050 } 3051 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 3052 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3053 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3054 } 3055 @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera 3056 3057######################################################################### 3058## Nios-II 3059######################################################################### 3060 3061EP1C20_config : unconfig 3062 @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera 3063 3064EP1S10_config : unconfig 3065 @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera 3066 3067EP1S40_config : unconfig 3068 @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera 3069 3070PK1C20_config : unconfig 3071 @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent 3072 3073PCI5441_config : unconfig 3074 @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent 3075 3076#======================================================================== 3077## Microblaze 3078#======================================================================== 3079 3080ml401_config: unconfig 3081 @mkdir -p $(obj)include 3082 @echo "#define CONFIG_ML401 1" > $(obj)include/config.h 3083 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx 3084 3085suzaku_config: unconfig 3086 @mkdir -p $(obj)include 3087 @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h 3088 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno 3089 3090xupv2p_config: unconfig 3091 @mkdir -p $(obj)include 3092 @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h 3093 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx 3094 3095#======================================================================== 3096# Blackfin 3097#======================================================================== 3098 3099# Analog Devices boards 3100BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit 3101 3102$(BFIN_BOARDS:%=%_config) : unconfig 3103 @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) 3104 3105$(BFIN_BOARDS): 3106 $(MAKE) $@_config 3107 $(MAKE) 3108 3109#======================================================================== 3110# AVR32 3111#======================================================================== 3112 3113atngw100_config : unconfig 3114 @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x 3115 3116atstk1002_config : unconfig 3117 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3118 3119atstk1003_config : unconfig 3120 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3121 3122atstk1004_config : unconfig 3123 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3124 3125atstk1006_config : unconfig 3126 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3127 3128favr-32-ezkit_config : unconfig 3129 @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x 3130 3131hammerhead_config : unconfig 3132 @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x 3133 3134mimc200_config : unconfig 3135 @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x 3136 3137#======================================================================== 3138# SH3 (SuperH) 3139#======================================================================== 3140 3141######################################################################### 3142## sh2 (Renesas SuperH) 3143######################################################################### 3144rsk7203_config: unconfig 3145 @ >include/config.h 3146 @echo "#define CONFIG_RSK7203 1" >> include/config.h 3147 @./mkconfig -a $(@:_config=) sh sh2 rsk7203 renesas 3148 3149######################################################################### 3150## sh3 (Renesas SuperH) 3151######################################################################### 3152 3153mpr2_config: unconfig 3154 @mkdir -p $(obj)include 3155 @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h 3156 @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 3157 3158ms7720se_config: unconfig 3159 @mkdir -p $(obj)include 3160 @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h 3161 @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se 3162 3163######################################################################### 3164## sh4 (Renesas SuperH) 3165######################################################################### 3166 3167MigoR_config : unconfig 3168 @mkdir -p $(obj)include 3169 @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h 3170 @./mkconfig -a $(@:_config=) sh sh4 MigoR renesas 3171 3172ms7750se_config: unconfig 3173 @mkdir -p $(obj)include 3174 @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h 3175 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se 3176 3177ms7722se_config : unconfig 3178 @mkdir -p $(obj)include 3179 @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h 3180 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se 3181 3182r2dplus_config : unconfig 3183 @mkdir -p $(obj)include 3184 @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h 3185 @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas 3186 3187r7780mp_config: unconfig 3188 @mkdir -p $(obj)include 3189 @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h 3190 @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas 3191 3192sh7763rdp_config : unconfig 3193 @mkdir -p $(obj)include 3194 @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h 3195 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas 3196 3197sh7785lcr_config : unconfig 3198 @ >include/config.h 3199 @echo "#define CONFIG_SH7785LCR 1" >> include/config.h 3200 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas 3201 3202ap325rxa_config : unconfig 3203 @mkdir -p $(obj)include 3204 @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h 3205 @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas 3206 3207#======================================================================== 3208# SPARC 3209#======================================================================== 3210 3211######################################################################### 3212## LEON3 3213######################################################################### 3214 3215# Gaisler GR-XC3S-1500 board 3216gr_xc3s_1500_config : unconfig 3217 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler 3218 3219# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system 3220gr_cpci_ax2000_config : unconfig 3221 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler 3222 3223# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS 3224# Development board Stratix II edition, FPGA Device EP2S60. 3225gr_ep2s60_config: unconfig 3226 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler 3227 3228# Gaisler LEON3 GRSIM simulator 3229grsim_config : unconfig 3230 @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler 3231 3232######################################################################### 3233## LEON2 3234######################################################################### 3235 3236# Gaisler LEON2 GRSIM simulator 3237grsim_leon2_config : unconfig 3238 @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler 3239 3240######################################################################### 3241######################################################################### 3242######################################################################### 3243 3244clean: 3245 @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \ 3246 $(obj)examples/hello_world $(obj)examples/interrupt \ 3247 $(obj)examples/mem_to_mem_idma2intr \ 3248 $(obj)examples/sched $(obj)examples/smc91111_eeprom \ 3249 $(obj)examples/test_burst $(obj)examples/timer 3250 @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ 3251 $(obj)tools/env/{fw_printenv,fw_setenv} \ 3252 $(obj)tools/envcrc \ 3253 $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ 3254 $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ 3255 $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ 3256 $(obj)tools/ncb $(obj)tools/ubsha1 3257 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ 3258 $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ 3259 $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ 3260 $(obj)board/{integratorap,integratorcp}/u-boot.lds \ 3261 $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \ 3262 $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] 3263 @rm -f $(obj)include/bmp_logo.h 3264 @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} 3265 @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} 3266 @rm -f $(obj)api_examples/demo $(VERSION_FILE) 3267 @find $(OBJTREE) -type f \ 3268 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 3269 -o -name '*.o' -o -name '*.a' \) -print \ 3270 | xargs rm -f 3271 3272clobber: clean 3273 @find $(OBJTREE) -type f \( -name .depend \ 3274 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 3275 -print0 \ 3276 | xargs -0 rm -f 3277 @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ 3278 $(obj)cscope.* $(obj)*.*~ 3279 @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) 3280 @rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes} 3281 @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h} 3282 @rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h} 3283 @rm -f $(obj)cpu/mpc824x/bedbug_603e.c 3284 @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm 3285 @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f 3286 @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f 3287 @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f 3288 3289ifeq ($(OBJTREE),$(SRCTREE)) 3290mrproper \ 3291distclean: clobber unconfig 3292else 3293mrproper \ 3294distclean: clobber unconfig 3295 rm -rf $(obj)* 3296endif 3297 3298backup: 3299 F=`basename $(TOPDIR)` ; cd .. ; \ 3300 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 3301 3302######################################################################### 3303