1# 2# SPDX-License-Identifier: GPL-2.0+ 3# 4 5VERSION = 2016 6PATCHLEVEL = 05 7SUBLEVEL = 8EXTRAVERSION = 9NAME = 10 11# *DOCUMENTATION* 12# To see a list of typical targets execute "make help" 13# More info can be located in ./README 14# Comments in this file are targeted only to the developer, do not 15# expect to learn how to build the kernel reading this file. 16 17# o Do not use make's built-in rules and variables 18# (this increases performance and avoids hard-to-debug behaviour); 19# o Look for make include files relative to root of kernel src 20MAKEFLAGS += -rR --include-dir=$(CURDIR) 21 22# Avoid funny character set dependencies 23unexport LC_ALL 24LC_COLLATE=C 25LC_NUMERIC=C 26export LC_COLLATE LC_NUMERIC 27 28# Avoid interference with shell env settings 29unexport GREP_OPTIONS 30 31# We are using a recursive build, so we need to do a little thinking 32# to get the ordering right. 33# 34# Most importantly: sub-Makefiles should only ever modify files in 35# their own directory. If in some directory we have a dependency on 36# a file in another dir (which doesn't happen often, but it's often 37# unavoidable when linking the built-in.o targets which finally 38# turn into vmlinux), we will call a sub make in that other dir, and 39# after that we are sure that everything which is in that other dir 40# is now up to date. 41# 42# The only cases where we need to modify files which have global 43# effects are thus separated out and done before the recursive 44# descending is started. They are now explicitly listed as the 45# prepare rule. 46 47# Beautify output 48# --------------------------------------------------------------------------- 49# 50# Normally, we echo the whole command before executing it. By making 51# that echo $($(quiet)$(cmd)), we now have the possibility to set 52# $(quiet) to choose other forms of output instead, e.g. 53# 54# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 55# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 56# 57# If $(quiet) is empty, the whole command will be printed. 58# If it is set to "quiet_", only the short version will be printed. 59# If it is set to "silent_", nothing will be printed at all, since 60# the variable $(silent_cmd_cc_o_c) doesn't exist. 61# 62# A simple variant is to prefix commands with $(Q) - that's useful 63# for commands that shall be hidden in non-verbose mode. 64# 65# $(Q)ln $@ :< 66# 67# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 68# If KBUILD_VERBOSE equals 1 then the above command is displayed. 69# 70# To put more focus on warnings, be less verbose as default 71# Use 'make V=1' to see the full commands 72 73ifeq ("$(origin V)", "command line") 74 KBUILD_VERBOSE = $(V) 75endif 76ifndef KBUILD_VERBOSE 77 KBUILD_VERBOSE = 0 78endif 79 80ifeq ($(KBUILD_VERBOSE),1) 81 quiet = 82 Q = 83else 84 quiet=quiet_ 85 Q = @ 86endif 87 88# If the user is running make -s (silent mode), suppress echoing of 89# commands 90 91ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 92ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) 93 quiet=silent_ 94endif 95else # make-3.8x 96ifneq ($(filter s% -s%,$(MAKEFLAGS)),) 97 quiet=silent_ 98endif 99endif 100 101export quiet Q KBUILD_VERBOSE 102 103# kbuild supports saving output files in a separate directory. 104# To locate output files in a separate directory two syntaxes are supported. 105# In both cases the working directory must be the root of the kernel src. 106# 1) O= 107# Use "make O=dir/to/store/output/files/" 108# 109# 2) Set KBUILD_OUTPUT 110# Set the environment variable KBUILD_OUTPUT to point to the directory 111# where the output files shall be placed. 112# export KBUILD_OUTPUT=dir/to/store/output/files/ 113# make 114# 115# The O= assignment takes precedence over the KBUILD_OUTPUT environment 116# variable. 117 118# KBUILD_SRC is set on invocation of make in OBJ directory 119# KBUILD_SRC is not intended to be used by the regular user (for now) 120ifeq ($(KBUILD_SRC),) 121 122# OK, Make called in directory where kernel src resides 123# Do we want to locate output files in a separate directory? 124ifeq ("$(origin O)", "command line") 125 KBUILD_OUTPUT := $(O) 126endif 127 128# That's our default target when none is given on the command line 129PHONY := _all 130_all: 131 132# Cancel implicit rules on top Makefile 133$(CURDIR)/Makefile Makefile: ; 134 135ifneq ($(KBUILD_OUTPUT),) 136# Invoke a second make in the output directory, passing relevant variables 137# check that the output directory actually exists 138saved-output := $(KBUILD_OUTPUT) 139KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ 140 && /bin/pwd) 141$(if $(KBUILD_OUTPUT),, \ 142 $(error failed to create output directory "$(saved-output)")) 143 144PHONY += $(MAKECMDGOALS) sub-make 145 146$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make 147 @: 148 149sub-make: FORCE 150 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ 151 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) 152 153# Leave processing to above invocation of make 154skip-makefile := 1 155endif # ifneq ($(KBUILD_OUTPUT),) 156endif # ifeq ($(KBUILD_SRC),) 157 158# We process the rest of the Makefile if this is the final invocation of make 159ifeq ($(skip-makefile),) 160 161# Do not print "Entering directory ...", 162# but we want to display it when entering to the output directory 163# so that IDEs/editors are able to understand relative filenames. 164MAKEFLAGS += --no-print-directory 165 166# Call a source code checker (by default, "sparse") as part of the 167# C compilation. 168# 169# Use 'make C=1' to enable checking of only re-compiled files. 170# Use 'make C=2' to enable checking of *all* source files, regardless 171# of whether they are re-compiled or not. 172# 173# See the file "Documentation/sparse.txt" for more details, including 174# where to get the "sparse" utility. 175 176ifeq ("$(origin C)", "command line") 177 KBUILD_CHECKSRC = $(C) 178endif 179ifndef KBUILD_CHECKSRC 180 KBUILD_CHECKSRC = 0 181endif 182 183# Use make M=dir to specify directory of external module to build 184# Old syntax make ... SUBDIRS=$PWD is still supported 185# Setting the environment variable KBUILD_EXTMOD take precedence 186ifdef SUBDIRS 187 KBUILD_EXTMOD ?= $(SUBDIRS) 188endif 189 190ifeq ("$(origin M)", "command line") 191 KBUILD_EXTMOD := $(M) 192endif 193 194# If building an external module we do not care about the all: rule 195# but instead _all depend on modules 196PHONY += all 197ifeq ($(KBUILD_EXTMOD),) 198_all: all 199else 200_all: modules 201endif 202 203ifeq ($(KBUILD_SRC),) 204 # building in the source tree 205 srctree := . 206else 207 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) 208 # building in a subdirectory of the source tree 209 srctree := .. 210 else 211 srctree := $(KBUILD_SRC) 212 endif 213endif 214objtree := . 215src := $(srctree) 216obj := $(objtree) 217 218VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 219 220export srctree objtree VPATH 221 222# Make sure CDPATH settings don't interfere 223unexport CDPATH 224 225######################################################################### 226 227HOSTARCH := $(shell uname -m | \ 228 sed -e s/i.86/x86/ \ 229 -e s/sun4u/sparc64/ \ 230 -e s/arm.*/arm/ \ 231 -e s/sa110/arm/ \ 232 -e s/ppc64/powerpc/ \ 233 -e s/ppc/powerpc/ \ 234 -e s/macppc/powerpc/\ 235 -e s/sh.*/sh/) 236 237HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 238 sed -e 's/\(cygwin\).*/cygwin/') 239 240export HOSTARCH HOSTOS 241 242######################################################################### 243 244# set default to nothing for native builds 245ifeq ($(HOSTARCH),$(ARCH)) 246CROSS_COMPILE ?= 247endif 248 249KCONFIG_CONFIG ?= .config 250export KCONFIG_CONFIG 251 252# SHELL used by kbuild 253CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 254 else if [ -x /bin/bash ]; then echo /bin/bash; \ 255 else echo sh; fi ; fi) 256 257HOSTCC = cc 258HOSTCXX = c++ 259HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer 260HOSTCXXFLAGS = -O2 261 262ifeq ($(HOSTOS),cygwin) 263HOSTCFLAGS += -ansi 264endif 265 266# Mac OS X / Darwin's C preprocessor is Apple specific. It 267# generates numerous errors and warnings. We want to bypass it 268# and use GNU C's cpp. To do this we pass the -traditional-cpp 269# option to the compiler. Note that the -traditional-cpp flag 270# DOES NOT have the same semantics as GNU C's flag, all it does 271# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. 272# 273# Apple's linker is similar, thanks to the new 2 stage linking 274# multiple symbol definitions are treated as errors, hence the 275# -multiply_defined suppress option to turn off this error. 276# 277ifeq ($(HOSTOS),darwin) 278# get major and minor product version (e.g. '10' and '6' for Snow Leopard) 279DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') 280DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') 281 282os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ 283 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) 284 285# Snow Leopards build environment has no longer restrictions as described above 286HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") 287HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") 288HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") 289 290# since Lion (10.7) ASLR is on by default, but we use linker generated lists 291# in some host tools which is a problem then ... so disable ASLR for these 292# tools 293HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie") 294endif 295 296# Decide whether to build built-in, modular, or both. 297# Normally, just do built-in. 298 299KBUILD_MODULES := 300KBUILD_BUILTIN := 1 301 302# If we have only "make modules", don't compile built-in objects. 303# When we're building modules with modversions, we need to consider 304# the built-in objects during the descend as well, in order to 305# make sure the checksums are up to date before we record them. 306 307ifeq ($(MAKECMDGOALS),modules) 308 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 309endif 310 311# If we have "make <whatever> modules", compile modules 312# in addition to whatever we do anyway. 313# Just "make" or "make all" shall build modules as well 314 315# U-Boot does not need modules 316#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 317# KBUILD_MODULES := 1 318#endif 319 320#ifeq ($(MAKECMDGOALS),) 321# KBUILD_MODULES := 1 322#endif 323 324export KBUILD_MODULES KBUILD_BUILTIN 325export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 326 327# We need some generic definitions (do not try to remake the file). 328scripts/Kbuild.include: ; 329include scripts/Kbuild.include 330 331# Make variables (CC, etc...) 332 333AS = $(CROSS_COMPILE)as 334# Always use GNU ld 335ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) 336LD = $(CROSS_COMPILE)ld.bfd 337else 338LD = $(CROSS_COMPILE)ld 339endif 340CC = $(CROSS_COMPILE)gcc 341CPP = $(CC) -E 342AR = $(CROSS_COMPILE)ar 343NM = $(CROSS_COMPILE)nm 344LDR = $(CROSS_COMPILE)ldr 345STRIP = $(CROSS_COMPILE)strip 346OBJCOPY = $(CROSS_COMPILE)objcopy 347OBJDUMP = $(CROSS_COMPILE)objdump 348AWK = awk 349PERL = perl 350PYTHON = python 351DTC = dtc 352CHECK = sparse 353 354CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 355 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) 356 357KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ 358 359KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ 360 -Wno-format-security \ 361 -fno-builtin -ffreestanding 362KBUILD_AFLAGS := -D__ASSEMBLY__ 363 364# Read UBOOTRELEASE from include/config/uboot.release (if it exists) 365UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) 366UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 367 368export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION 369export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR 370export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC 371export CPP AR NM LDR STRIP OBJCOPY OBJDUMP 372export MAKE AWK PERL PYTHON 373export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS 374 375export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS 376export KBUILD_CFLAGS KBUILD_AFLAGS 377 378# When compiling out-of-tree modules, put MODVERDIR in the module 379# tree rather than in the kernel tree. The kernel tree might 380# even be read-only. 381export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 382 383# Files to ignore in find ... statements 384 385export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 386 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 387 -prune -o 388export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 389 --exclude CVS --exclude .pc --exclude .hg --exclude .git 390 391# =========================================================================== 392# Rules shared between *config targets and build targets 393 394# Basic helpers built in scripts/ 395PHONY += scripts_basic 396scripts_basic: 397 $(Q)$(MAKE) $(build)=scripts/basic 398 $(Q)rm -f .tmp_quiet_recordmcount 399 400# To avoid any implicit rule to kick in, define an empty command. 401scripts/basic/%: scripts_basic ; 402 403PHONY += outputmakefile 404# outputmakefile generates a Makefile in the output directory, if using a 405# separate output directory. This allows convenient use of make in the 406# output directory. 407outputmakefile: 408ifneq ($(KBUILD_SRC),) 409 $(Q)ln -fsn $(srctree) source 410 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ 411 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) 412endif 413 414# To make sure we do not include .config for any of the *config targets 415# catch them early, and hand them over to scripts/kconfig/Makefile 416# It is allowed to specify more targets when calling make, including 417# mixing *config targets and build targets. 418# For example 'make oldconfig all'. 419# Detect when mixed targets is specified, and make a second invocation 420# of make so .config is not included in this case either (for *config). 421 422version_h := include/generated/version_autogenerated.h 423timestamp_h := include/generated/timestamp_autogenerated.h 424 425no-dot-config-targets := clean clobber mrproper distclean \ 426 help %docs check% coccicheck \ 427 ubootversion backup 428 429config-targets := 0 430mixed-targets := 0 431dot-config := 1 432 433ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 434 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 435 dot-config := 0 436 endif 437endif 438 439ifeq ($(KBUILD_EXTMOD),) 440 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 441 config-targets := 1 442 ifneq ($(words $(MAKECMDGOALS)),1) 443 mixed-targets := 1 444 endif 445 endif 446endif 447 448ifeq ($(mixed-targets),1) 449# =========================================================================== 450# We're called with mixed targets (*config and build targets). 451# Handle them one by one. 452 453PHONY += $(MAKECMDGOALS) __build_one_by_one 454 455$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one 456 @: 457 458__build_one_by_one: 459 $(Q)set -e; \ 460 for i in $(MAKECMDGOALS); do \ 461 $(MAKE) -f $(srctree)/Makefile $$i; \ 462 done 463 464else 465ifeq ($(config-targets),1) 466# =========================================================================== 467# *config targets only - make sure prerequisites are updated, and descend 468# in scripts/kconfig to make the *config target 469 470KBUILD_DEFCONFIG := sandbox_defconfig 471export KBUILD_DEFCONFIG KBUILD_KCONFIG 472 473config: scripts_basic outputmakefile FORCE 474 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 475 476%config: scripts_basic outputmakefile FORCE 477 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 478 479else 480# =========================================================================== 481# Build targets only - this includes vmlinux, arch specific targets, clean 482# targets and others. In general all targets except *config targets. 483 484ifeq ($(dot-config),1) 485# Read in config 486-include include/config/auto.conf 487 488# Read in dependencies to all Kconfig* files, make sure to run 489# oldconfig if changes are detected. 490-include include/config/auto.conf.cmd 491 492# To avoid any implicit rule to kick in, define an empty command 493$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; 494 495# If .config is newer than include/config/auto.conf, someone tinkered 496# with it and forgot to run make oldconfig. 497# if auto.conf.cmd is missing then we are probably in a cleaned tree so 498# we execute the config step to be sure to catch updated Kconfig files 499include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd 500 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig 501 @# If the following part fails, include/config/auto.conf should be 502 @# deleted so "make silentoldconfig" will be re-run on the next build. 503 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \ 504 { rm -f include/config/auto.conf; false; } 505 @# include/config.h has been updated after "make silentoldconfig". 506 @# We need to touch include/config/auto.conf so it gets newer 507 @# than include/config.h. 508 @# Otherwise, 'make silentoldconfig' would be invoked twice. 509 $(Q)touch include/config/auto.conf 510 511-include include/autoconf.mk 512-include include/autoconf.mk.dep 513 514# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf 515# is up-to-date. When we switch to a different board configuration, old CONFIG 516# macros are still remaining in include/config/auto.conf. Without the following 517# gimmick, wrong config.mk would be included leading nasty warnings/errors. 518ifneq ($(wildcard $(KCONFIG_CONFIG)),) 519ifneq ($(wildcard include/config/auto.conf),) 520autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \ 521 include/config/auto.conf) 522ifeq ($(autoconf_is_old),) 523include config.mk 524include arch/$(ARCH)/Makefile 525endif 526endif 527endif 528 529# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use 530# that (or fail if absent). Otherwise, search for a linker script in a 531# standard location. 532 533ifndef LDSCRIPT 534 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug 535 ifdef CONFIG_SYS_LDSCRIPT 536 # need to strip off double quotes 537 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%) 538 endif 539endif 540 541# If there is no specified link script, we look in a number of places for it 542ifndef LDSCRIPT 543 ifeq ($(wildcard $(LDSCRIPT)),) 544 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds 545 endif 546 ifeq ($(wildcard $(LDSCRIPT)),) 547 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds 548 endif 549 ifeq ($(wildcard $(LDSCRIPT)),) 550 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds 551 endif 552endif 553 554else 555# Dummy target needed, because used as prerequisite 556include/config/auto.conf: ; 557endif # $(dot-config) 558 559ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 560KBUILD_CFLAGS += -Os 561else 562KBUILD_CFLAGS += -O2 563endif 564 565KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) 566KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks) 567 568KBUILD_CFLAGS += -g 569# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> 570# option to the assembler. 571KBUILD_AFLAGS += -g 572 573# Report stack usage if supported 574ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y) 575 KBUILD_CFLAGS += -fstack-usage 576endif 577 578KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) 579 580# turn jbsr into jsr for m68k 581ifeq ($(ARCH),m68k) 582ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) 583KBUILD_AFLAGS += -Wa,-gstabs,-S 584endif 585endif 586 587# Prohibit date/time macros, which would make the build non-deterministic 588KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) 589 590include scripts/Makefile.extrawarn 591 592# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 593KBUILD_CPPFLAGS += $(KCPPFLAGS) 594KBUILD_AFLAGS += $(KAFLAGS) 595KBUILD_CFLAGS += $(KCFLAGS) 596 597# Use UBOOTINCLUDE when you must reference the include/ directory. 598# Needed to be compatible with the O= option 599UBOOTINCLUDE := \ 600 -Iinclude \ 601 $(if $(KBUILD_SRC), -I$(srctree)/include) \ 602 $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \ 603 -I$(srctree)/arch/$(ARCH)/thumb1/include),) \ 604 -I$(srctree)/arch/$(ARCH)/include \ 605 -include $(srctree)/include/linux/kconfig.h 606 607NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 608CHECKFLAGS += $(NOSTDINC_FLAGS) 609 610# FIX ME 611cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 612 $(NOSTDINC_FLAGS) 613c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 614 615######################################################################### 616# U-Boot objects....order is important (i.e. start must be first) 617 618HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 619 620libs-y += lib/ 621libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 622libs-$(CONFIG_OF_EMBED) += dts/ 623libs-y += fs/ 624libs-y += net/ 625libs-y += disk/ 626libs-y += drivers/ 627libs-y += drivers/dma/ 628libs-y += drivers/gpio/ 629libs-y += drivers/i2c/ 630libs-y += drivers/mmc/ 631libs-y += drivers/mtd/ 632libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ 633libs-y += drivers/mtd/onenand/ 634libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ 635libs-y += drivers/mtd/spi/ 636libs-y += drivers/net/ 637libs-y += drivers/net/phy/ 638libs-y += drivers/pci/ 639libs-y += drivers/power/ \ 640 drivers/power/fuel_gauge/ \ 641 drivers/power/mfd/ \ 642 drivers/power/pmic/ \ 643 drivers/power/battery/ \ 644 drivers/power/regulator/ 645libs-y += drivers/spi/ 646libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ 647libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ 648libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/ 649libs-y += drivers/serial/ 650libs-y += drivers/usb/dwc3/ 651libs-y += drivers/usb/common/ 652libs-y += drivers/usb/emul/ 653libs-y += drivers/usb/eth/ 654libs-y += drivers/usb/gadget/ 655libs-y += drivers/usb/gadget/udc/ 656libs-y += drivers/usb/host/ 657libs-y += drivers/usb/musb/ 658libs-y += drivers/usb/musb-new/ 659libs-y += drivers/usb/phy/ 660libs-y += drivers/usb/ulpi/ 661libs-y += cmd/ 662libs-y += common/ 663libs-$(CONFIG_API) += api/ 664libs-$(CONFIG_HAS_POST) += post/ 665libs-y += test/ 666libs-y += test/dm/ 667libs-$(CONFIG_UT_ENV) += test/env/ 668 669libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 670 671libs-y := $(sort $(libs-y)) 672 673u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples 674 675u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-)))) 676 677libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 678 679u-boot-init := $(head-y) 680u-boot-main := $(libs-y) 681 682 683# Add GCC lib 684ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 685PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 686else 687PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc 688endif 689PLATFORM_LIBS += $(PLATFORM_LIBGCC) 690export PLATFORM_LIBS 691export PLATFORM_LIBGCC 692 693# Special flags for CPP when processing the linker script. 694# Pass the version down so we can handle backwards compatibility 695# on the fly. 696LDPPFLAGS += \ 697 -include $(srctree)/include/u-boot/u-boot.lds.h \ 698 -DCPUDIR=$(CPUDIR) \ 699 $(shell $(LD) --version | \ 700 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 701 702######################################################################### 703######################################################################### 704 705ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) 706BOARD_SIZE_CHECK = \ 707 @actual=`wc -c $@ | awk '{print $$1}'`; \ 708 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ 709 if test $$actual -gt $$limit; then \ 710 echo "$@ exceeds file size limit:" >&2 ; \ 711 echo " limit: $$limit bytes" >&2 ; \ 712 echo " actual: $$actual bytes" >&2 ; \ 713 echo " excess: $$((actual - limit)) bytes" >&2; \ 714 exit 1; \ 715 fi 716else 717BOARD_SIZE_CHECK = 718endif 719 720# Statically apply RELA-style relocations (currently arm64 only) 721ifneq ($(CONFIG_STATIC_RELA),) 722# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base 723DO_STATIC_RELA = \ 724 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ 725 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ 726 tools/relocate-rela $(2) $(3) $$start $$end 727else 728DO_STATIC_RELA = 729endif 730 731# Always append ALL so that arch config.mk's can add custom ones 732ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map u-boot.cfg binary_size_check 733 734ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin 735ifeq ($(CONFIG_SPL_FSL_PBL),y) 736ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin 737else 738ifneq ($(CONFIG_SECURE_BOOT), y) 739# For Secure Boot The Image needs to be signed and Header must also 740# be included. So The image has to be built explicitly 741ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl 742endif 743endif 744ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin 745ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img 746ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin 747ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb 748ifeq ($(CONFIG_SPL_FRAMEWORK),y) 749ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img 750endif 751ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb 752ifneq ($(CONFIG_SPL_TARGET),) 753ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) 754endif 755ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf 756ALL-$(CONFIG_EFI_APP) += u-boot-app.efi 757ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi 758 759ifneq ($(BUILD_ROM),) 760ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom 761endif 762 763# enable combined SPL/u-boot/dtb rules for tegra 764ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy) 765ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin 766ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin 767endif 768 769# Add optional build target if defined in board/cpu/soc headers 770ifneq ($(CONFIG_BUILD_TARGET),) 771ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) 772endif 773 774LDFLAGS_u-boot += $(LDFLAGS_FINAL) 775ifneq ($(CONFIG_SYS_TEXT_BASE),) 776LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) 777endif 778 779# Normally we fill empty space with 0xff 780quiet_cmd_objcopy = OBJCOPY $@ 781cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \ 782 $(OBJCOPYFLAGS_$(@F)) $< $@ 783 784# Provide a version which does not do this, for use by EFI 785quiet_cmd_zobjcopy = OBJCOPY $@ 786cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 787 788quiet_cmd_efipayload = OBJCOPY $@ 789cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@ 790 791quiet_cmd_mkimage = MKIMAGE $@ 792cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 793 $(if $(KBUILD_VERBOSE:1=), >/dev/null) 794 795quiet_cmd_cat = CAT $@ 796cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 797 798append = cat $(filter-out $< $(PHONY), $^) >> $@ 799 800quiet_cmd_pad_cat = CAT $@ 801cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ 802 803all: $(ALL-y) 804ifeq ($(CONFIG_DM_I2C_COMPAT),y) 805 @echo "===================== WARNING ======================" 806 @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove" 807 @echo "(possibly in a subsequent patch in your series)" 808 @echo "before sending patches to the mailing list." 809 @echo "====================================================" 810endif 811 812PHONY += dtbs 813dtbs dts/dt.dtb: checkdtc u-boot 814 $(Q)$(MAKE) $(build)=dts dtbs 815 816quiet_cmd_copy = COPY $@ 817 cmd_copy = cp $< $@ 818 819ifeq ($(CONFIG_OF_SEPARATE),y) 820u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE 821 $(call if_changed,cat) 822 823u-boot.bin: u-boot-dtb.bin FORCE 824 $(call if_changed,copy) 825else 826u-boot.bin: u-boot-nodtb.bin FORCE 827 $(call if_changed,copy) 828endif 829 830%.imx: %.bin 831 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 832 833u-boot.dtb: dts/dt.dtb 834 $(call cmd,copy) 835 836OBJCOPYFLAGS_u-boot.hex := -O ihex 837 838OBJCOPYFLAGS_u-boot.srec := -O srec 839 840u-boot.hex u-boot.srec: u-boot FORCE 841 $(call if_changed,objcopy) 842 843OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \ 844 $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec) 845 846binary_size_check: u-boot-nodtb.bin FORCE 847 @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \ 848 map_size=$(shell cat u-boot.map | \ 849 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ 850 | sed 's/0X//g' \ 851 | bc); \ 852 if [ "" != "$$map_size" ]; then \ 853 if test $$map_size -ne $$file_size; then \ 854 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ 855 echo " but u-boot-nodtb.bin shows $$file_size" >&2 ; \ 856 exit 1; \ 857 fi \ 858 fi 859 860u-boot-nodtb.bin: u-boot FORCE 861 $(call if_changed,objcopy) 862 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) 863 $(BOARD_SIZE_CHECK) 864 865u-boot.ldr: u-boot 866 $(CREATE_LDR_ENV) 867 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) 868 $(BOARD_SIZE_CHECK) 869 870OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex 871 872OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec 873 874u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE 875 $(call if_changed,objcopy) 876 877# 878# U-Boot entry point, needed for booting of full-blown U-Boot 879# from the SPL U-Boot version. 880# 881ifndef CONFIG_SYS_UBOOT_START 882CONFIG_SYS_UBOOT_START := 0 883endif 884 885# Create a file containing the configuration options the image was built with 886quiet_cmd_cpp_cfg = CFG $@ 887cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 888 -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< 889 890ifdef CONFIG_SPL_LOAD_FIT 891MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ 892 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 893 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ 894 $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) 895else 896MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ 897 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 898 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" 899endif 900 901MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) 902 903MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 904 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 905 906MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 907 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 908 909MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 910 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage 911 912u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \ 913 $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE 914 $(call if_changed,mkimage) 915 916u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE 917 $(call if_changed,mkimage) 918 919u-boot.sha1: u-boot.bin 920 tools/ubsha1 u-boot.bin 921 922u-boot.dis: u-boot 923 $(OBJDUMP) -d $< > $@ 924 925u-boot.cfg: include/config.h FORCE 926 $(call if_changed,cpp_cfg) 927 928ifdef CONFIG_TPL 929SPL_PAYLOAD := tpl/u-boot-with-tpl.bin 930else 931SPL_PAYLOAD := u-boot.bin 932endif 933 934OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ 935 --pad-to=$(CONFIG_SPL_PAD_TO) 936u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE 937 $(call if_changed,pad_cat) 938 939MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE) 940 941lpc32xx-spl.img: spl/u-boot-spl.bin FORCE 942 $(call if_changed,mkimage) 943 944OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 945 946lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE 947 $(call if_changed,objcopy) 948 949OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 950 951lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE 952 $(call if_changed,objcopy) 953 954lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE 955 $(call if_changed,cat) 956 957CLEAN_FILES += lpc32xx-* 958 959OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ 960 --pad-to=$(CONFIG_TPL_PAD_TO) 961tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE 962 $(call if_changed,pad_cat) 963 964SPL: spl/u-boot-spl.bin FORCE 965 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 966 967u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE 968 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 969 970MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE) 971 972u-boot.ubl: u-boot-with-spl.bin FORCE 973 $(call if_changed,mkimage) 974 975MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ 976 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ 977 -T aisimage -e $(CONFIG_SPL_TEXT_BASE) 978spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE 979 $(call if_changed,mkimage) 980 981OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 982u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE 983 $(call if_changed,pad_cat) 984 985u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin 986 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb 987u-boot.sb: u-boot.bin spl/u-boot-spl.bin 988 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb 989 990# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. 991# Both images are created using mkimage (crc etc), so that the ROM 992# bootloader can check its integrity. Padding needs to be done to the 993# SPL image (with mkimage header) and not the binary. Otherwise the resulting image 994# which is loaded/copied by the ROM bootloader to SRAM doesn't fit. 995# The resulting image containing both U-Boot images is called u-boot.spr 996MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ 997 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER 998spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE 999 $(call if_changed,mkimage) 1000 1001OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 1002 --gap-fill=0xff 1003u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE 1004 $(call if_changed,pad_cat) 1005 1006ifneq ($(CONFIG_ARCH_SOCFPGA),) 1007quiet_cmd_socboot = SOCBOOT $@ 1008cmd_socboot = cat spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ 1009 spl/u-boot-spl.sfp spl/u-boot-spl.sfp \ 1010 u-boot.img > $@ || rm -f $@ 1011u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE 1012 $(call if_changed,socboot) 1013endif 1014 1015# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including 1016# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in 1017# the middle. 1018ifneq ($(CONFIG_X86_RESET_VECTOR),) 1019rom: u-boot.rom FORCE 1020 1021IFDTOOL=$(objtree)/tools/ifdtool 1022IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb 1023IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1) 1024IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin 1025IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin 1026IFDTOOL_FLAGS += -C 1027 1028ifneq ($(CONFIG_HAVE_INTEL_ME),) 1029IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin 1030IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin 1031endif 1032 1033ifneq ($(CONFIG_HAVE_MRC),) 1034IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin 1035endif 1036 1037ifneq ($(CONFIG_HAVE_FSP),) 1038IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE) 1039endif 1040 1041ifneq ($(CONFIG_HAVE_CMC),) 1042IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE) 1043endif 1044 1045ifneq ($(CONFIG_HAVE_VGA_BIOS),) 1046IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE) 1047endif 1048 1049ifneq ($(CONFIG_HAVE_REFCODE),) 1050IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin 1051endif 1052 1053quiet_cmd_ifdtool = IFDTOOL $@ 1054cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp; 1055ifneq ($(CONFIG_HAVE_INTEL_ME),) 1056cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp; 1057endif 1058cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp; 1059cmd_ifdtool += mv u-boot.tmp $@ 1060 1061refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE 1062 $(call if_changed,copy) 1063 1064quiet_cmd_ldr = LD $@ 1065cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \ 1066 $(filter-out FORCE,$^) -o $@ 1067 1068u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \ 1069 $(if $(CONFIG_HAVE_REFCODE),refcode.bin) 1070 $(call if_changed,ifdtool) 1071 1072OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec 1073u-boot-x86-16bit.bin: u-boot FORCE 1074 $(call if_changed,objcopy) 1075endif 1076 1077ifneq ($(CONFIG_SUNXI),) 1078OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ 1079 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff 1080u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE 1081 $(call if_changed,pad_cat) 1082endif 1083 1084ifneq ($(CONFIG_TEGRA),) 1085OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 1086u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE 1087 $(call if_changed,pad_cat) 1088 1089OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 1090u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE 1091 $(call if_changed,pad_cat) 1092 1093u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE 1094 $(call if_changed,copy) 1095endif 1096 1097OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI) 1098u-boot-app.efi: u-boot FORCE 1099 $(call if_changed,zobjcopy) 1100 1101u-boot.bin.o: u-boot.bin FORCE 1102 $(call if_changed,efipayload) 1103 1104u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE 1105 $(call if_changed_dep,cpp_lds) 1106 1107# Rule to link the EFI payload which contains a stub and a U-Boot binary 1108quiet_cmd_u-boot_payload ?= LD $@ 1109 cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \ 1110 -T u-boot-payload.lds arch/x86/cpu/call32.o \ 1111 lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \ 1112 $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB)) 1113 1114u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE 1115 $(call if_changed,u-boot_payload) 1116 1117OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI) 1118u-boot-payload.efi: u-boot-payload FORCE 1119 $(call if_changed,zobjcopy) 1120 1121u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE 1122 $(call if_changed,cat) 1123 1124#Add a target to create boot binary having SPL binary in PBI format 1125#concatenated with u-boot binary. It is need by PowerPC SoC having 1126#internal SRAM <= 512KB. 1127MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 1128 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ 1129 -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) 1130 1131spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE 1132 $(call if_changed,mkimage) 1133 1134ifeq ($(ARCH),arm) 1135UBOOT_BINLOAD := u-boot.img 1136else 1137UBOOT_BINLOAD := u-boot.bin 1138endif 1139 1140OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 1141 --gap-fill=0xff 1142 1143u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE 1144 $(call if_changed,pad_cat) 1145 1146# PPC4xx needs the SPL at the end of the image, since the reset vector 1147# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target 1148# and need to introduce a new build target with the full blown U-Boot 1149# at the start padded up to the start of the SPL image. And then concat 1150# the SPL image to the end. 1151 1152OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \ 1153 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff 1154u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE 1155 $(call if_changed,pad_cat) 1156 1157# Create a new ELF from a raw binary file. This is useful for arm64 1158# where static relocation needs to be performed on the raw binary, 1159# but certain simulators only accept an ELF file (but don't do the 1160# relocation). 1161# FIXME refactor dts/Makefile to share target/arch detection 1162u-boot.elf: u-boot.bin 1163 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \ 1164 $< u-boot-elf.o 1165 @$(LD) u-boot-elf.o -o $@ \ 1166 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \ 1167 -Ttext=$(CONFIG_SYS_TEXT_BASE) 1168 1169# Rule to link u-boot 1170# May be overridden by arch/$(ARCH)/config.mk 1171quiet_cmd_u-boot__ ?= LD $@ 1172 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \ 1173 -T u-boot.lds $(u-boot-init) \ 1174 --start-group $(u-boot-main) --end-group \ 1175 $(PLATFORM_LIBS) -Map u-boot.map 1176 1177quiet_cmd_smap = GEN common/system_map.o 1178cmd_smap = \ 1179 smap=`$(call SYSTEM_MAP,u-boot) | \ 1180 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 1181 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ 1182 -c $(srctree)/common/system_map.c -o common/system_map.o 1183 1184u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds FORCE 1185 $(call if_changed,u-boot__) 1186ifeq ($(CONFIG_KALLSYMS),y) 1187 $(call cmd,smap) 1188 $(call cmd,u-boot__) common/system_map.o 1189endif 1190 1191quiet_cmd_sym ?= SYM $@ 1192 cmd_sym ?= $(OBJDUMP) -t $< > $@ 1193u-boot.sym: u-boot FORCE 1194 $(call if_changed,sym) 1195 1196# The actual objects are generated when descending, 1197# make sure no implicit rule kicks in 1198$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; 1199 1200# Handle descending into subdirectories listed in $(vmlinux-dirs) 1201# Preset locale variables to speed up the build process. Limit locale 1202# tweaks to this spot to avoid wrong language settings when running 1203# make menuconfig etc. 1204# Error messages still appears in the original language 1205 1206PHONY += $(u-boot-dirs) 1207$(u-boot-dirs): prepare scripts 1208 $(Q)$(MAKE) $(build)=$@ 1209 1210tools: prepare 1211# The "tools" are needed early 1212$(filter-out tools, $(u-boot-dirs)): tools 1213# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC 1214# is "yes"), so compile examples after U-Boot is compiled. 1215examples: $(filter-out examples, $(u-boot-dirs)) 1216 1217define filechk_uboot.release 1218 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1219endef 1220 1221# Store (new) UBOOTRELEASE string in include/config/uboot.release 1222include/config/uboot.release: include/config/auto.conf FORCE 1223 $(call filechk,uboot.release) 1224 1225 1226# Things we need to do before we recursively start building the kernel 1227# or the modules are listed in "prepare". 1228# A multi level approach is used. prepareN is processed before prepareN-1. 1229# archprepare is used in arch Makefiles and when processed asm symlink, 1230# version.h and scripts_basic is processed / created. 1231 1232# Listed in dependency order 1233PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 1234 1235# prepare3 is used to check if we are building in a separate output directory, 1236# and if so do: 1237# 1) Check that make has not been executed in the kernel src $(srctree) 1238prepare3: include/config/uboot.release 1239ifneq ($(KBUILD_SRC),) 1240 @$(kecho) ' Using $(srctree) as source for U-Boot' 1241 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ 1242 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ 1243 echo >&2 " in the '$(srctree)' directory.";\ 1244 /bin/false; \ 1245 fi; 1246endif 1247 1248# prepare2 creates a makefile if using a separate output directory 1249prepare2: prepare3 outputmakefile 1250 1251prepare1: prepare2 $(version_h) $(timestamp_h) \ 1252 include/config/auto.conf 1253ifeq ($(wildcard $(LDSCRIPT)),) 1254 @echo >&2 " Could not find linker script." 1255 @/bin/false 1256endif 1257 1258archprepare: prepare1 scripts_basic 1259 1260prepare0: archprepare FORCE 1261 $(Q)$(MAKE) $(build)=. 1262 1263# All the preparing.. 1264prepare: prepare0 1265 1266# Generate some files 1267# --------------------------------------------------------------------------- 1268 1269define filechk_version.h 1270 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ 1271 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \ 1272 echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \ 1273 echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; ) 1274endef 1275 1276# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date. 1277# The BSD date on the other hand behaves different and would produce errors 1278# with the misused '-d' switch. Respect that and search a working date with 1279# well known pre- and suffixes for the GNU variant of date. 1280define filechk_timestamp.h 1281 (if test -n "$${SOURCE_DATE_EPOCH}"; then \ 1282 SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \ 1283 DATE=""; \ 1284 for date in gdate date.gnu date; do \ 1285 $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \ 1286 done; \ 1287 if test -n "$${DATE}"; then \ 1288 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1289 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \ 1290 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \ 1291 LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ 1292 else \ 1293 return 42; \ 1294 fi; \ 1295 else \ 1296 LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1297 LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \ 1298 LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \ 1299 LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \ 1300 fi) 1301endef 1302 1303$(version_h): include/config/uboot.release FORCE 1304 $(call filechk,version.h) 1305 1306$(timestamp_h): $(srctree)/Makefile FORCE 1307 $(call filechk,timestamp.h) 1308 1309# --------------------------------------------------------------------------- 1310quiet_cmd_cpp_lds = LDS $@ 1311cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 1312 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 1313 1314u-boot.lds: $(LDSCRIPT) prepare FORCE 1315 $(call if_changed_dep,cpp_lds) 1316 1317spl/u-boot-spl.bin: spl/u-boot-spl 1318 @: 1319spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb) 1320 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all 1321 1322spl/sunxi-spl.bin: spl/u-boot-spl 1323 @: 1324 1325spl/u-boot-spl.sfp: spl/u-boot-spl 1326 @: 1327 1328spl/boot.bin: spl/u-boot-spl 1329 @: 1330 1331tpl/u-boot-tpl.bin: tools prepare 1332 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all 1333 1334TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) 1335 1336FIND := find 1337FINDFLAGS := -L 1338 1339tags ctags: 1340 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1341 -name '*.[chS]' -print` 1342 ln -s ctags tags 1343 1344etags: 1345 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1346 -name '*.[chS]' -print` 1347cscope: 1348 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ 1349 cscope.files 1350 cscope -b -q -k 1351 1352SYSTEM_MAP = \ 1353 $(NM) $1 | \ 1354 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 1355 LC_ALL=C sort 1356System.map: u-boot 1357 @$(call SYSTEM_MAP,$<) > $@ 1358 1359checkdtc: 1360 @if test $(call dtc-version) -lt 0104; then \ 1361 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ 1362 false; \ 1363 fi 1364 1365######################################################################### 1366 1367# ARM relocations should all be R_ARM_RELATIVE (32-bit) or 1368# R_AARCH64_RELATIVE (64-bit). 1369checkarmreloc: u-boot 1370 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ 1371 grep R_A | sort -u`"; \ 1372 if test "$$RELOC" != "R_ARM_RELATIVE" -a \ 1373 "$$RELOC" != "R_AARCH64_RELATIVE"; then \ 1374 echo "$< contains unexpected relocations: $$RELOC"; \ 1375 false; \ 1376 fi 1377 1378env: scripts_basic 1379 $(Q)$(MAKE) $(build)=tools/$@ 1380 1381tools-only: scripts_basic $(version_h) $(timestamp_h) 1382 $(Q)$(MAKE) $(build)=tools 1383 1384tools-all: export HOST_TOOLS_ALL=y 1385tools-all: env tools ; 1386 1387cross_tools: export CROSS_BUILD_TOOLS=y 1388cross_tools: tools ; 1389 1390.PHONY : CHANGELOG 1391CHANGELOG: 1392 git log --no-merges U-Boot-1_1_5.. | \ 1393 unexpand -a | sed -e 's/\s\s*$$//' > $@ 1394 1395######################################################################### 1396 1397### 1398# Cleaning is done on three levels. 1399# make clean Delete most generated files 1400# Leave enough to build external modules 1401# make mrproper Delete the current configuration, and all generated files 1402# make distclean Remove editor backup files, patch leftover files and the like 1403 1404# Directories & files removed with 'make clean' 1405CLEAN_DIRS += $(MODVERDIR) \ 1406 $(foreach d, spl tpl, $(patsubst %,$d/%, \ 1407 $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) 1408 1409CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \ 1410 boot* u-boot* MLO* SPL System.map 1411 1412# Directories & files removed with 'make mrproper' 1413MRPROPER_DIRS += include/config include/generated spl tpl \ 1414 .tmp_objdiff 1415MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ 1416 ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS 1417 1418# clean - Delete most, but leave enough to build external modules 1419# 1420clean: rm-dirs := $(CLEAN_DIRS) 1421clean: rm-files := $(CLEAN_FILES) 1422 1423clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f)) 1424 1425clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook) 1426 1427PHONY += $(clean-dirs) clean archclean 1428$(clean-dirs): 1429 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1430 1431# TODO: Do not use *.cfgtmp 1432clean: $(clean-dirs) 1433 $(call cmd,rmdirs) 1434 $(call cmd,rmfiles) 1435 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1436 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1437 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \ 1438 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1439 -o -name '*.symtypes' -o -name 'modules.order' \ 1440 -o -name modules.builtin -o -name '.tmp_*.o.*' \ 1441 -o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \ 1442 -o -name '*.gcno' \) -type f -print | xargs rm -f 1443 1444# mrproper - Delete all generated files, including .config 1445# 1446mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) 1447mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1448mrproper-dirs := $(addprefix _mrproper_,scripts) 1449 1450PHONY += $(mrproper-dirs) mrproper archmrproper 1451$(mrproper-dirs): 1452 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1453 1454mrproper: clean $(mrproper-dirs) 1455 $(call cmd,rmdirs) 1456 $(call cmd,rmfiles) 1457 @rm -f arch/*/include/asm/arch 1458 1459# distclean 1460# 1461PHONY += distclean 1462 1463distclean: mrproper 1464 @find $(srctree) $(RCS_FIND_IGNORE) \ 1465 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1466 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ 1467 -o -name '.*.rej' -o -name '*%' -o -name 'core' \ 1468 -o -name '*.pyc' \) \ 1469 -type f -print | xargs rm -f 1470 @rm -f boards.cfg 1471 1472backup: 1473 F=`basename $(srctree)` ; cd .. ; \ 1474 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 1475 1476help: 1477 @echo 'Cleaning targets:' 1478 @echo ' clean - Remove most generated files but keep the config' 1479 @echo ' mrproper - Remove all generated files + config + various backup files' 1480 @echo ' distclean - mrproper + remove editor backup and patch files' 1481 @echo '' 1482 @echo 'Configuration targets:' 1483 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1484 @echo '' 1485 @echo 'Other generic targets:' 1486 @echo ' all - Build all necessary images depending on configuration' 1487 @echo '* u-boot - Build the bare u-boot' 1488 @echo ' dir/ - Build all files in dir and below' 1489 @echo ' dir/file.[oisS] - Build specified target only' 1490 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1491 @echo ' (requires a recent binutils and recent build (System.map))' 1492 @echo ' tags/ctags - Generate ctags file for editors' 1493 @echo ' etags - Generate etags file for editors' 1494 @echo ' cscope - Generate cscope index' 1495 @echo ' ubootrelease - Output the release version string (use with make -s)' 1496 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' 1497 @echo '' 1498 @echo 'Static analysers' 1499 @echo ' checkstack - Generate a list of stack hogs' 1500 @echo '' 1501 @echo 'Documentation targets:' 1502 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp 1503 @echo '' 1504 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1505 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1506 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1507 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' 1508 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1509 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1510 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' 1511 @echo ' 1: warnings which may be relevant and do not occur too often' 1512 @echo ' 2: warnings which occur quite often but may still be relevant' 1513 @echo ' 3: more obscure warnings, can most likely be ignored' 1514 @echo ' Multiple levels can be combined with W=12 or W=123' 1515 @echo '' 1516 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1517 @echo 'For further info see the ./README file' 1518 1519 1520# Documentation targets 1521# --------------------------------------------------------------------------- 1522%docs: scripts_basic FORCE 1523 $(Q)$(MAKE) $(build)=scripts build_docproc 1524 $(Q)$(MAKE) $(build)=doc/DocBook $@ 1525 1526# Dummies... 1527PHONY += prepare scripts 1528prepare: ; 1529scripts: ; 1530 1531endif #ifeq ($(config-targets),1) 1532endif #ifeq ($(mixed-targets),1) 1533 1534PHONY += checkstack ubootrelease ubootversion 1535 1536checkstack: 1537 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ 1538 $(PERL) $(src)/scripts/checkstack.pl $(ARCH) 1539 1540ubootrelease: 1541 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1542 1543ubootversion: 1544 @echo $(UBOOTVERSION) 1545 1546# Single targets 1547# --------------------------------------------------------------------------- 1548# Single targets are compatible with: 1549# - build with mixed source and output 1550# - build with separate output dir 'make O=...' 1551# - external modules 1552# 1553# target-dir => where to store outputfile 1554# build-dir => directory in kernel source tree to use 1555 1556ifeq ($(KBUILD_EXTMOD),) 1557 build-dir = $(patsubst %/,%,$(dir $@)) 1558 target-dir = $(dir $@) 1559else 1560 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) 1561 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) 1562 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) 1563endif 1564 1565%.s: %.c prepare scripts FORCE 1566 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1567%.i: %.c prepare scripts FORCE 1568 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1569%.o: %.c prepare scripts FORCE 1570 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1571%.lst: %.c prepare scripts FORCE 1572 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1573%.s: %.S prepare scripts FORCE 1574 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1575%.o: %.S prepare scripts FORCE 1576 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1577%.symtypes: %.c prepare scripts FORCE 1578 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1579 1580# Modules 1581/: prepare scripts FORCE 1582 $(cmd_crmodverdir) 1583 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1584 $(build)=$(build-dir) 1585%/: prepare scripts FORCE 1586 $(cmd_crmodverdir) 1587 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1588 $(build)=$(build-dir) 1589%.ko: prepare scripts FORCE 1590 $(cmd_crmodverdir) 1591 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1592 $(build)=$(build-dir) $(@:.ko=.o) 1593 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1594 1595# FIXME Should go into a make.lib or something 1596# =========================================================================== 1597 1598quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) 1599 cmd_rmdirs = rm -rf $(rm-dirs) 1600 1601quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1602 cmd_rmfiles = rm -f $(rm-files) 1603 1604# read all saved command lines 1605 1606targets := $(wildcard $(sort $(targets))) 1607cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 1608 1609ifneq ($(cmd_files),) 1610 $(cmd_files): ; # Do not try to update included dependency files 1611 include $(cmd_files) 1612endif 1613 1614endif # skip-makefile 1615 1616PHONY += FORCE 1617FORCE: 1618 1619# Declare the contents of the .PHONY variable as phony. We keep that 1620# information in a variable so we can use it in if_changed and friends. 1621.PHONY: $(PHONY) 1622