1# 2# (C) Copyright 2000-2009 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 2009 25PATCHLEVEL = 06 26SUBLEVEL = 27EXTRAVERSION = 28ifneq "$(SUBLEVEL)" "" 29U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 30else 31U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) 32endif 33TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h 34VERSION_FILE = $(obj)include/version_autogenerated.h 35 36HOSTARCH := $(shell uname -m | \ 37 sed -e s/i.86/i386/ \ 38 -e s/sun4u/sparc64/ \ 39 -e s/arm.*/arm/ \ 40 -e s/sa110/arm/ \ 41 -e s/powerpc/ppc/ \ 42 -e s/ppc64/ppc/ \ 43 -e s/macppc/ppc/) 44 45HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 46 sed -e 's/\(cygwin\).*/cygwin/') 47 48# Set shell to bash if possible, otherwise fall back to sh 49SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 50 else if [ -x /bin/bash ]; then echo /bin/bash; \ 51 else echo sh; fi; fi) 52 53export HOSTARCH HOSTOS SHELL 54 55# Deal with colliding definitions from tcsh etc. 56VENDOR= 57 58######################################################################### 59# Allow for silent builds 60ifeq (,$(findstring s,$(MAKEFLAGS))) 61XECHO = echo 62else 63XECHO = : 64endif 65 66######################################################################### 67# 68# U-boot build supports producing a object files to the separate external 69# directory. Two use cases are supported: 70# 71# 1) Add O= to the make command line 72# 'make O=/tmp/build all' 73# 74# 2) Set environement variable BUILD_DIR to point to the desired location 75# 'export BUILD_DIR=/tmp/build' 76# 'make' 77# 78# The second approach can also be used with a MAKEALL script 79# 'export BUILD_DIR=/tmp/build' 80# './MAKEALL' 81# 82# Command line 'O=' setting overrides BUILD_DIR environent variable. 83# 84# When none of the above methods is used the local build is performed and 85# the object files are placed in the source directory. 86# 87 88ifdef O 89ifeq ("$(origin O)", "command line") 90BUILD_DIR := $(O) 91endif 92endif 93 94ifneq ($(BUILD_DIR),) 95saved-output := $(BUILD_DIR) 96 97# Attempt to create a output directory. 98$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) 99 100# Verify if it was successful. 101BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) 102$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) 103endif # ifneq ($(BUILD_DIR),) 104 105OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) 106SRCTREE := $(CURDIR) 107TOPDIR := $(SRCTREE) 108LNDIR := $(OBJTREE) 109export TOPDIR SRCTREE OBJTREE 110 111MKCONFIG := $(SRCTREE)/mkconfig 112export MKCONFIG 113 114ifneq ($(OBJTREE),$(SRCTREE)) 115REMOTE_BUILD := 1 116export REMOTE_BUILD 117endif 118 119# $(obj) and (src) are defined in config.mk but here in main Makefile 120# we also need them before config.mk is included which is the case for 121# some targets like unconfig, clean, clobber, distclean, etc. 122ifneq ($(OBJTREE),$(SRCTREE)) 123obj := $(OBJTREE)/ 124src := $(SRCTREE)/ 125else 126obj := 127src := 128endif 129export obj src 130 131# Make sure CDPATH settings don't interfere 132unexport CDPATH 133 134######################################################################### 135 136ifeq ($(ARCH),powerpc) 137ARCH = ppc 138endif 139 140# The "tools" are needed early, so put this first 141# Don't include stuff already done in $(LIBS) 142SUBDIRS = tools \ 143 examples/standalone \ 144 examples/api 145 146.PHONY : $(SUBDIRS) 147 148ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) 149 150# load ARCH, BOARD, and CPU configuration 151include $(obj)include/config.mk 152export ARCH CPU BOARD VENDOR SOC 153 154# set default to nothing for native builds 155ifeq ($(HOSTARCH),$(ARCH)) 156CROSS_COMPILE ?= 157endif 158 159# load other configuration 160include $(TOPDIR)/config.mk 161 162######################################################################### 163# U-Boot objects....order is important (i.e. start must be first) 164 165OBJS = cpu/$(CPU)/start.o 166ifeq ($(CPU),i386) 167OBJS += cpu/$(CPU)/start16.o 168OBJS += cpu/$(CPU)/resetvec.o 169endif 170ifeq ($(CPU),ppc4xx) 171OBJS += cpu/$(CPU)/resetvec.o 172endif 173ifeq ($(CPU),mpc85xx) 174OBJS += cpu/$(CPU)/resetvec.o 175endif 176 177OBJS := $(addprefix $(obj),$(OBJS)) 178 179LIBS = lib_generic/libgeneric.a 180LIBS += lib_generic/lzma/liblzma.a 181LIBS += lib_generic/lzo/liblzo.a 182LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ 183 "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) 184LIBS += cpu/$(CPU)/lib$(CPU).a 185ifdef SOC 186LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 187endif 188ifeq ($(CPU),ixp) 189LIBS += cpu/ixp/npe/libnpe.a 190endif 191LIBS += lib_$(ARCH)/lib$(ARCH).a 192LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 193 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \ 194 fs/ubifs/libubifs.a 195LIBS += net/libnet.a 196LIBS += disk/libdisk.a 197LIBS += drivers/bios_emulator/libatibiosemu.a 198LIBS += drivers/block/libblock.a 199LIBS += drivers/dma/libdma.a 200LIBS += drivers/fpga/libfpga.a 201LIBS += drivers/gpio/libgpio.a 202LIBS += drivers/hwmon/libhwmon.a 203LIBS += drivers/i2c/libi2c.a 204LIBS += drivers/input/libinput.a 205LIBS += drivers/misc/libmisc.a 206LIBS += drivers/mmc/libmmc.a 207LIBS += drivers/mtd/libmtd.a 208LIBS += drivers/mtd/nand/libnand.a 209LIBS += drivers/mtd/onenand/libonenand.a 210LIBS += drivers/mtd/ubi/libubi.a 211LIBS += drivers/mtd/spi/libspi_flash.a 212LIBS += drivers/net/libnet.a 213LIBS += drivers/net/phy/libphy.a 214LIBS += drivers/net/sk98lin/libsk98lin.a 215LIBS += drivers/pci/libpci.a 216LIBS += drivers/pcmcia/libpcmcia.a 217LIBS += drivers/spi/libspi.a 218ifeq ($(CPU),mpc83xx) 219LIBS += drivers/qe/qe.a 220endif 221ifeq ($(CPU),mpc85xx) 222LIBS += drivers/qe/qe.a 223LIBS += cpu/mpc8xxx/ddr/libddr.a 224TAG_SUBDIRS += cpu/mpc8xxx 225endif 226ifeq ($(CPU),mpc86xx) 227LIBS += cpu/mpc8xxx/ddr/libddr.a 228TAG_SUBDIRS += cpu/mpc8xxx 229endif 230LIBS += drivers/rtc/librtc.a 231LIBS += drivers/serial/libserial.a 232LIBS += drivers/twserial/libtws.a 233LIBS += drivers/usb/gadget/libusb_gadget.a 234LIBS += drivers/usb/host/libusb_host.a 235LIBS += drivers/usb/musb/libusb_musb.a 236LIBS += drivers/video/libvideo.a 237LIBS += drivers/watchdog/libwatchdog.a 238LIBS += common/libcommon.a 239LIBS += libfdt/libfdt.a 240LIBS += api/libapi.a 241LIBS += post/libpost.a 242 243LIBS := $(addprefix $(obj),$(LIBS)) 244.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) 245 246LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a 247LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) 248 249# Add GCC lib 250PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 251 252ifeq ($(CONFIG_NAND_U_BOOT),y) 253NAND_SPL = nand_spl 254U_BOOT_NAND = $(obj)u-boot-nand.bin 255endif 256 257ifeq ($(CONFIG_ONENAND_U_BOOT),y) 258ONENAND_IPL = onenand_ipl 259U_BOOT_ONENAND = $(obj)u-boot-onenand.bin 260endif 261 262__OBJS := $(subst $(obj),,$(OBJS)) 263__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) 264 265######################################################################### 266######################################################################### 267 268# Always append ALL so that arch config.mk's can add custom ones 269ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) 270 271all: $(ALL) 272 273$(obj)u-boot.hex: $(obj)u-boot 274 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 275 276$(obj)u-boot.srec: $(obj)u-boot 277 $(OBJCOPY) -O srec $< $@ 278 279$(obj)u-boot.bin: $(obj)u-boot 280 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 281 282$(obj)u-boot.ldr: $(obj)u-boot 283 $(obj)tools/envcrc --binary > $(obj)env-ldr.o 284 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) 285 286$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr 287 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 288 289$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr 290 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 291 292$(obj)u-boot.img: $(obj)u-boot.bin 293 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 294 -a $(TEXT_BASE) -e 0 \ 295 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 296 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 297 -d $< $@ 298 299$(obj)u-boot.sha1: $(obj)u-boot.bin 300 $(obj)tools/ubsha1 $(obj)u-boot.bin 301 302$(obj)u-boot.dis: $(obj)u-boot 303 $(OBJDUMP) -d $< > $@ 304 305GEN_UBOOT = \ 306 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ 307 sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 308 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ 309 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ 310 -Map u-boot.map -o u-boot 311$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) 312 $(GEN_UBOOT) 313ifeq ($(CONFIG_KALLSYMS),y) 314 smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 315 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o 316 $(GEN_UBOOT) $(obj)common/system_map.o 317endif 318 319$(OBJS): depend 320 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) 321 322$(LIBS): depend $(SUBDIRS) 323 $(MAKE) -C $(dir $(subst $(obj),,$@)) 324 325$(LIBBOARD): depend $(LIBS) 326 $(MAKE) -C $(dir $(subst $(obj),,$@)) 327 328$(SUBDIRS): depend 329 $(MAKE) -C $@ all 330 331$(LDSCRIPT): depend 332 $(MAKE) -C $(dir $@) $(notdir $@) 333 334$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 335 $(MAKE) -C nand_spl/board/$(BOARDDIR) all 336 337$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin 338 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin 339 340$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 341 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all 342 343$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin 344 cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin 345 cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin 346 347$(VERSION_FILE): 348 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ 349 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp 350 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 351 352$(TIMESTAMP_FILE): 353 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ 354 @date +'#define U_BOOT_TIME "%T"' >> $@ 355 356gdbtools: 357 $(MAKE) -C tools/gdb all || exit 1 358 359updater: 360 $(MAKE) -C tools/updater all || exit 1 361 362env: 363 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 364 365depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 366 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done 367 368TAG_SUBDIRS += include 369TAG_SUBDIRS += lib_generic board/$(BOARDDIR) 370TAG_SUBDIRS += cpu/$(CPU) 371TAG_SUBDIRS += lib_$(ARCH) 372TAG_SUBDIRS += fs/cramfs 373TAG_SUBDIRS += fs/fat 374TAG_SUBDIRS += fs/fdos 375TAG_SUBDIRS += fs/jffs2 376TAG_SUBDIRS += fs/yaffs2 377TAG_SUBDIRS += net 378TAG_SUBDIRS += disk 379TAG_SUBDIRS += common 380TAG_SUBDIRS += drivers/bios_emulator 381TAG_SUBDIRS += drivers/block 382TAG_SUBDIRS += drivers/gpio 383TAG_SUBDIRS += drivers/hwmon 384TAG_SUBDIRS += drivers/i2c 385TAG_SUBDIRS += drivers/input 386TAG_SUBDIRS += drivers/misc 387TAG_SUBDIRS += drivers/mmc 388TAG_SUBDIRS += drivers/mtd 389TAG_SUBDIRS += drivers/mtd/nand 390TAG_SUBDIRS += drivers/mtd/onenand 391TAG_SUBDIRS += drivers/mtd/spi 392TAG_SUBDIRS += drivers/net 393TAG_SUBDIRS += drivers/net/sk98lin 394TAG_SUBDIRS += drivers/pci 395TAG_SUBDIRS += drivers/pcmcia 396TAG_SUBDIRS += drivers/qe 397TAG_SUBDIRS += drivers/rtc 398TAG_SUBDIRS += drivers/serial 399TAG_SUBDIRS += drivers/spi 400TAG_SUBDIRS += drivers/usb 401TAG_SUBDIRS += drivers/video 402 403tags ctags: 404 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 405 -name '*.[ch]' -print` 406 407etags: 408 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 409 -name '*.[ch]' -print` 410cscope: 411 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ 412 > cscope.files 413 cscope -b -q -k 414 415SYSTEM_MAP = \ 416 $(NM) $1 | \ 417 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 418 LC_ALL=C sort 419$(obj)System.map: $(obj)u-boot 420 @$(call SYSTEM_MAP,$<) > $(obj)System.map 421 422# 423# Auto-generate the autoconf.mk file (which is included by all makefiles) 424# 425# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 426# the dep file is only include in this top level makefile to determine when 427# to regenerate the autoconf.mk file. 428$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h 429 @$(XECHO) Generating $@ ; \ 430 set -e ; \ 431 : Generate the dependancies ; \ 432 $(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \ 433 -MQ $(obj)include/autoconf.mk include/common.h > $@ 434 435$(obj)include/autoconf.mk: $(obj)include/config.h 436 @$(XECHO) Generating $@ ; \ 437 set -e ; \ 438 : Extract the config macros ; \ 439 $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ 440 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ 441 mv $@.tmp $@ 442 443sinclude $(obj)include/autoconf.mk.dep 444sinclude $(obj)include/autoconf.mk 445 446######################################################################### 447else # !config.mk 448all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ 449$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ 450$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \ 451dep tags ctags etags cscope $(obj)System.map: 452 @echo "System not configured - see README" >&2 453 @ exit 1 454endif # config.mk 455 456.PHONY : CHANGELOG 457CHANGELOG: 458 git log --no-merges U-Boot-1_1_5.. | \ 459 unexpand -a | sed -e 's/\s\s*$$//' > $@ 460 461include/license.h: tools/bin2header COPYING 462 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 463######################################################################### 464 465unconfig: 466 @rm -f $(obj)include/config.h $(obj)include/config.mk \ 467 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ 468 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep 469 470#======================================================================== 471# PowerPC 472#======================================================================== 473 474######################################################################### 475## MPC5xx Systems 476######################################################################### 477 478canmb_config: unconfig 479 @$(MKCONFIG) -a canmb ppc mpc5xxx canmb 480 481cmi_mpc5xx_config: unconfig 482 @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi 483 484PATI_config: unconfig 485 @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl 486 487######################################################################### 488## MPC5xxx Systems 489######################################################################### 490 491aev_config: unconfig 492 @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc 493 494BC3450_config: unconfig 495 @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 496 497cm5200_config: unconfig 498 @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 499 500cpci5200_config: unconfig 501 @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd 502 503digsy_mtc_config \ 504digsy_mtc_LOWBOOT_config \ 505digsy_mtc_RAMBOOT_config: unconfig 506 @mkdir -p $(obj)include 507 @mkdir -p $(obj)board/digsy_mtc 508 @ >$(obj)include/config.h 509 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 510 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ 511 echo "... with LOWBOOT configuration" ; \ 512 } 513 @[ -z "$(findstring RAMBOOT_,$@)" ] || \ 514 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ 515 echo "... with RAMBOOT configuration" ; \ 516 } 517 @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc 518 519hmi1001_config: unconfig 520 @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 521 522Lite5200_config \ 523Lite5200_LOWBOOT_config \ 524Lite5200_LOWBOOT08_config \ 525icecube_5200_config \ 526icecube_5200_LOWBOOT_config \ 527icecube_5200_LOWBOOT08_config \ 528icecube_5200_DDR_config \ 529icecube_5200_DDR_LOWBOOT_config \ 530icecube_5200_DDR_LOWBOOT08_config \ 531icecube_5100_config: unconfig 532 @mkdir -p $(obj)include 533 @mkdir -p $(obj)board/icecube 534 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 535 { if [ "$(findstring DDR,$@)" ] ; \ 536 then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 537 else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 538 fi ; \ 539 $(XECHO) "... with LOWBOOT configuration" ; \ 540 } 541 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 542 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 543 echo "... with 8 MB flash only" ; \ 544 $(XECHO) "... with LOWBOOT configuration" ; \ 545 } 546 @[ -z "$(findstring DDR,$@)" ] || \ 547 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 548 $(XECHO) "... DDR memory revision" ; \ 549 } 550 @[ -z "$(findstring 5200,$@)" ] || \ 551 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 552 $(XECHO) "... with MPC5200 processor" ; \ 553 } 554 @[ -z "$(findstring 5100,$@)" ] || \ 555 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 556 $(XECHO) "... with MGT5100 processor" ; \ 557 } 558 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 559 560jupiter_config: unconfig 561 @$(MKCONFIG) jupiter ppc mpc5xxx jupiter 562 563inka4x0_config: unconfig 564 @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 565 566lite5200b_config \ 567lite5200b_PM_config \ 568lite5200b_LOWBOOT_config: unconfig 569 @mkdir -p $(obj)include 570 @mkdir -p $(obj)board/icecube 571 @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h 572 @ $(XECHO) "... DDR memory revision" 573 @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h 574 @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h 575 @[ -z "$(findstring _PM_,$@)" ] || \ 576 { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ 577 $(XECHO) "... with power management (low-power mode) support" ; \ 578 } 579 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 580 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 581 $(XECHO) "... with LOWBOOT configuration" ; \ 582 } 583 @ $(XECHO) "... with MPC5200B processor" 584 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 585 586mcc200_config \ 587mcc200_SDRAM_config \ 588mcc200_highboot_config \ 589mcc200_COM12_config \ 590mcc200_COM12_SDRAM_config \ 591mcc200_COM12_highboot_config \ 592mcc200_COM12_highboot_SDRAM_config \ 593mcc200_highboot_SDRAM_config \ 594prs200_config \ 595prs200_DDR_config \ 596prs200_highboot_config \ 597prs200_highboot_DDR_config: unconfig 598 @mkdir -p $(obj)include 599 @mkdir -p $(obj)board/mcc200 600 @[ -n "$(findstring highboot,$@)" ] || \ 601 { $(XECHO) "... with lowboot configuration" ; \ 602 } 603 @[ -z "$(findstring highboot,$@)" ] || \ 604 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ 605 $(XECHO) "... with highboot configuration" ; \ 606 } 607 @[ -n "$(findstring _SDRAM,$@)" ] || \ 608 { if [ -n "$(findstring mcc200,$@)" ]; \ 609 then \ 610 $(XECHO) "... with DDR" ; \ 611 else \ 612 if [ -n "$(findstring _DDR,$@)" ];\ 613 then \ 614 $(XECHO) "... with DDR" ; \ 615 else \ 616 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ 617 $(XECHO) "... with SDRAM" ; \ 618 fi; \ 619 fi; \ 620 } 621 @[ -z "$(findstring _SDRAM,$@)" ] || \ 622 { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ 623 $(XECHO) "... with SDRAM" ; \ 624 } 625 @[ -z "$(findstring COM12,$@)" ] || \ 626 { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ 627 $(XECHO) "... with console on COM12" ; \ 628 } 629 @[ -z "$(findstring prs200,$@)" ] || \ 630 { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ 631 } 632 @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 633 634mecp5200_config: unconfig 635 @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd 636 637motionpro_config: unconfig 638 @$(MKCONFIG) motionpro ppc mpc5xxx motionpro 639 640mucmc52_config: unconfig 641 @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52 642 643munices_config: unconfig 644 @$(MKCONFIG) munices ppc mpc5xxx munices 645 646MVBC_P_config: unconfig 647 @mkdir -p $(obj)include 648 @mkdir -p $(obj)board/mvbc_p 649 @ >$(obj)include/config.h 650 @[ -z "$(findstring MVBC_P,$@)" ] || \ 651 { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } 652 @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision 653 654o2dnt_config: unconfig 655 @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt 656 657pcm030_config \ 658pcm030_LOWBOOT_config: unconfig 659 @mkdir -p $(obj)include $(obj)board/phytec/pcm030 660 @ >$(obj)include/config.h 661 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 662 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ 663 echo "... with LOWBOOT configuration" ; \ 664 } 665 @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec 666 667pf5200_config: unconfig 668 @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd 669 670PM520_config \ 671PM520_DDR_config \ 672PM520_ROMBOOT_config \ 673PM520_ROMBOOT_DDR_config: unconfig 674 @mkdir -p $(obj)include 675 @[ -z "$(findstring DDR,$@)" ] || \ 676 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 677 $(XECHO) "... DDR memory revision" ; \ 678 } 679 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 680 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 681 $(XECHO) "... booting from 8-bit flash" ; \ 682 } 683 @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 684 685smmaco4_config: unconfig 686 @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc 687 688spieval_config: unconfig 689 @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc 690 691TB5200_B_config \ 692TB5200_config: unconfig 693 @mkdir -p $(obj)include 694 @[ -z "$(findstring _B,$@)" ] || \ 695 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 696 $(XECHO) "... with MPC5200B processor" ; \ 697 } 698 @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc 699 700MINI5200_config \ 701EVAL5200_config \ 702TOP5200_config: unconfig 703 @mkdir -p $(obj)include 704 @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 705 @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk 706 707Total5100_config \ 708Total5200_config \ 709Total5200_lowboot_config \ 710Total5200_Rev2_config \ 711Total5200_Rev2_lowboot_config: unconfig 712 @mkdir -p $(obj)include 713 @mkdir -p $(obj)board/total5200 714 @[ -z "$(findstring 5100,$@)" ] || \ 715 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 716 $(XECHO) "... with MGT5100 processor" ; \ 717 } 718 @[ -z "$(findstring 5200,$@)" ] || \ 719 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 720 $(XECHO) "... with MPC5200 processor" ; \ 721 } 722 @[ -n "$(findstring Rev,$@)" ] || \ 723 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ 724 $(XECHO) "... revision 1 board" ; \ 725 } 726 @[ -z "$(findstring Rev2_,$@)" ] || \ 727 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ 728 $(XECHO) "... revision 2 board" ; \ 729 } 730 @[ -z "$(findstring lowboot_,$@)" ] || \ 731 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ 732 $(XECHO) "... with lowboot configuration" ; \ 733 } 734 @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 735 736cam5200_config \ 737cam5200_niosflash_config \ 738fo300_config \ 739MiniFAP_config \ 740TQM5200S_config \ 741TQM5200S_HIGHBOOT_config \ 742TQM5200_B_config \ 743TQM5200_B_HIGHBOOT_config \ 744TQM5200_config \ 745TQM5200_STK100_config: unconfig 746 @mkdir -p $(obj)include 747 @mkdir -p $(obj)board/tqc/tqm5200 748 @[ -z "$(findstring cam5200,$@)" ] || \ 749 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ 750 echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 751 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 752 $(XECHO) "... TQM5200S on Cam5200" ; \ 753 } 754 @[ -z "$(findstring niosflash,$@)" ] || \ 755 { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ 756 $(XECHO) "... with NIOS flash driver" ; \ 757 } 758 @[ -z "$(findstring fo300,$@)" ] || \ 759 { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ 760 $(XECHO) "... TQM5200 on FO300" ; \ 761 } 762 @[ -z "$(findstring MiniFAP,$@)" ] || \ 763 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ 764 $(XECHO) "... TQM5200_AC on MiniFAP" ; \ 765 } 766 @[ -z "$(findstring STK100,$@)" ] || \ 767 { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ 768 $(XECHO) "... on a STK52XX.100 base board" ; \ 769 } 770 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 771 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 772 } 773 @[ -z "$(findstring TQM5200S,$@)" ] || \ 774 { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 775 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 776 } 777 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 778 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ 779 } 780 @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc 781 782uc101_config: unconfig 783 @$(MKCONFIG) uc101 ppc mpc5xxx uc101 784 785v38b_config: unconfig 786 @$(MKCONFIG) -a v38b ppc mpc5xxx v38b 787 788######################################################################### 789## MPC512x Systems 790######################################################################### 791 792aria_config: unconfig 793 @$(MKCONFIG) -a aria ppc mpc512x aria davedenx 794 795mecp5123_config: unconfig 796 @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd 797 798mpc5121ads_config \ 799mpc5121ads_rev2_config \ 800 : unconfig 801 @mkdir -p $(obj)include 802 @if [ "$(findstring rev2,$@)" ] ; then \ 803 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ 804 fi 805 @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale 806 807######################################################################### 808## MPC8xx Systems 809######################################################################### 810 811Adder_config \ 812Adder87x_config \ 813AdderII_config \ 814 : unconfig 815 @mkdir -p $(obj)include 816 $(if $(findstring AdderII,$@), \ 817 @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) 818 @$(MKCONFIG) -a Adder ppc mpc8xx adder 819 820AdderUSB_config: unconfig 821 @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder 822 823ADS860_config \ 824FADS823_config \ 825FADS850SAR_config \ 826MPC86xADS_config \ 827MPC885ADS_config \ 828FADS860T_config: unconfig 829 @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads 830 831AMX860_config : unconfig 832 @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel 833 834c2mon_config: unconfig 835 @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon 836 837CCM_config: unconfig 838 @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens 839 840cogent_mpc8xx_config: unconfig 841 @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent 842 843ELPT860_config: unconfig 844 @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX 845 846EP88x_config: unconfig 847 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x 848 849ESTEEM192E_config: unconfig 850 @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e 851 852ETX094_config : unconfig 853 @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 854 855FLAGADM_config: unconfig 856 @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm 857 858xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 859 860GEN860T_SC_config \ 861GEN860T_config: unconfig 862 @mkdir -p $(obj)include 863 @[ -z "$(findstring _SC,$@)" ] || \ 864 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ 865 $(XECHO) "With reduced H/W feature set (SC)..." ; \ 866 } 867 @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 868 869GENIETV_config: unconfig 870 @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv 871 872GTH_config: unconfig 873 @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth 874 875hermes_config : unconfig 876 @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes 877 878HMI10_config : unconfig 879 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 880 881IAD210_config: unconfig 882 @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens 883 884xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 885 886ICU862_100MHz_config \ 887ICU862_config: unconfig 888 @mkdir -p $(obj)include 889 @[ -z "$(findstring _100MHz,$@)" ] || \ 890 { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ 891 $(XECHO) "... with 100MHz system clock" ; \ 892 } 893 @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 894 895IP860_config : unconfig 896 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 897 898IVML24_256_config \ 899IVML24_128_config \ 900IVML24_config: unconfig 901 @mkdir -p $(obj)include 902 @[ -z "$(findstring IVML24_config,$@)" ] || \ 903 { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ 904 } 905 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 906 { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ 907 } 908 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 909 { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ 910 } 911 @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm 912 913IVMS8_256_config \ 914IVMS8_128_config \ 915IVMS8_config: unconfig 916 @mkdir -p $(obj)include 917 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 918 { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ 919 } 920 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 921 { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ 922 } 923 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 924 { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ 925 } 926 @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm 927 928kmsupx4_config: unconfig 929 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 930 931KUP4K_config : unconfig 932 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup 933 934KUP4X_config : unconfig 935 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup 936 937LANTEC_config : unconfig 938 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec 939 940lwmon_config: unconfig 941 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon 942 943MBX_config \ 944MBX860T_config: unconfig 945 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx 946 947mgsuvd_config: unconfig 948 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 949 950MHPC_config: unconfig 951 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec 952 953xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 954 955NETVIA_V2_config \ 956NETVIA_config: unconfig 957 @mkdir -p $(obj)include 958 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 959 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ 960 $(XECHO) "... Version 1" ; \ 961 } 962 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 963 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ 964 $(XECHO) "... Version 2" ; \ 965 } 966 @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 967 968xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 969 970NETPHONE_V2_config \ 971NETPHONE_config: unconfig 972 @mkdir -p $(obj)include 973 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 974 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ 975 } 976 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 977 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ 978 } 979 @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 980 981xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 982 983NETTA_ISDN_6412_SWAPHOOK_config \ 984NETTA_ISDN_SWAPHOOK_config \ 985NETTA_6412_SWAPHOOK_config \ 986NETTA_SWAPHOOK_config \ 987NETTA_ISDN_6412_config \ 988NETTA_ISDN_config \ 989NETTA_6412_config \ 990NETTA_config: unconfig 991 @mkdir -p $(obj)include 992 @[ -z "$(findstring ISDN_,$@)" ] || \ 993 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ 994 } 995 @[ -n "$(findstring ISDN_,$@)" ] || \ 996 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ 997 } 998 @[ -z "$(findstring 6412_,$@)" ] || \ 999 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ 1000 } 1001 @[ -n "$(findstring 6412_,$@)" ] || \ 1002 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ 1003 } 1004 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 1005 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ 1006 } 1007 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 1008 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ 1009 } 1010 @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta 1011 1012xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 1013 1014NETTA2_V2_config \ 1015NETTA2_config: unconfig 1016 @mkdir -p $(obj)include 1017 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 1018 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ 1019 } 1020 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 1021 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ 1022 } 1023 @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 1024 1025NC650_Rev1_config \ 1026NC650_Rev2_config \ 1027CP850_config: unconfig 1028 @mkdir -p $(obj)include 1029 @[ -z "$(findstring CP850,$@)" ] || \ 1030 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ 1031 echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1032 } 1033 @[ -z "$(findstring Rev1,$@)" ] || \ 1034 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ 1035 } 1036 @[ -z "$(findstring Rev2,$@)" ] || \ 1037 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1038 } 1039 @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 1040 1041NX823_config: unconfig 1042 @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 1043 1044pcu_e_config: unconfig 1045 @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens 1046 1047QS850_config: unconfig 1048 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1049 1050QS823_config: unconfig 1051 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1052 1053QS860T_config: unconfig 1054 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc 1055 1056quantum_config: unconfig 1057 @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum 1058 1059R360MPI_config: unconfig 1060 @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi 1061 1062RBC823_config: unconfig 1063 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 1064 1065RPXClassic_config: unconfig 1066 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic 1067 1068RPXlite_config: unconfig 1069 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite 1070 1071RPXlite_DW_64_config \ 1072RPXlite_DW_LCD_config \ 1073RPXlite_DW_64_LCD_config \ 1074RPXlite_DW_NVRAM_config \ 1075RPXlite_DW_NVRAM_64_config \ 1076RPXlite_DW_NVRAM_LCD_config \ 1077RPXlite_DW_NVRAM_64_LCD_config \ 1078RPXlite_DW_config: unconfig 1079 @mkdir -p $(obj)include 1080 @[ -z "$(findstring _64,$@)" ] || \ 1081 { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ 1082 $(XECHO) "... with 64MHz system clock ..."; \ 1083 } 1084 @[ -z "$(findstring _LCD,$@)" ] || \ 1085 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1086 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1087 $(XECHO) "... with LCD display ..."; \ 1088 } 1089 @[ -z "$(findstring _NVRAM,$@)" ] || \ 1090 { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ 1091 $(XECHO) "... with ENV in NVRAM ..."; \ 1092 } 1093 @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw 1094 1095rmu_config: unconfig 1096 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu 1097 1098RRvision_config: unconfig 1099 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision 1100 1101RRvision_LCD_config: unconfig 1102 @mkdir -p $(obj)include 1103 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1104 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1105 @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision 1106 1107SM850_config : unconfig 1108 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 1109 1110spc1920_config: unconfig 1111 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 1112 1113SPD823TS_config: unconfig 1114 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx 1115 1116stxxtc_config: unconfig 1117 @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc 1118 1119svm_sc8xx_config: unconfig 1120 @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx 1121 1122SXNI855T_config: unconfig 1123 @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet 1124 1125# EMK MPC8xx based modules 1126TOP860_config: unconfig 1127 @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk 1128 1129# Play some tricks for configuration selection 1130# Only 855 and 860 boards may come with FEC 1131# and only 823 boards may have LCD support 1132xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 1133 1134FPS850L_config \ 1135FPS860L_config \ 1136NSCU_config \ 1137TQM823L_config \ 1138TQM823L_LCD_config \ 1139TQM850L_config \ 1140TQM855L_config \ 1141TQM860L_config \ 1142TQM862L_config \ 1143TQM823M_config \ 1144TQM850M_config \ 1145TQM855M_config \ 1146TQM860M_config \ 1147TQM862M_config \ 1148TQM866M_config \ 1149TQM885D_config \ 1150TK885D_config \ 1151virtlab2_config: unconfig 1152 @mkdir -p $(obj)include 1153 @[ -z "$(findstring _LCD,$@)" ] || \ 1154 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1155 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1156 $(XECHO) "... with LCD display" ; \ 1157 } 1158 @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc 1159 1160TTTech_config: unconfig 1161 @mkdir -p $(obj)include 1162 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1163 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1164 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1165 1166uc100_config : unconfig 1167 @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 1168 1169v37_config: unconfig 1170 @mkdir -p $(obj)include 1171 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1172 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h 1173 @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 1174 1175wtk_config: unconfig 1176 @mkdir -p $(obj)include 1177 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1178 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h 1179 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1180 1181######################################################################### 1182## PPC4xx Systems 1183######################################################################### 1184xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 1185 1186acadia_config: unconfig 1187 @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc 1188 1189acadia_nand_config: unconfig 1190 @mkdir -p $(obj)include $(obj)board/amcc/acadia 1191 @mkdir -p $(obj)nand_spl/board/amcc/acadia 1192 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1193 @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc 1194 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp 1195 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1196 1197ADCIOP_config: unconfig 1198 @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd 1199 1200alpr_config: unconfig 1201 @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive 1202 1203AP1000_config:unconfig 1204 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix 1205 1206APC405_config: unconfig 1207 @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd 1208 1209AR405_config: unconfig 1210 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd 1211 1212ASH405_config: unconfig 1213 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd 1214 1215bamboo_config: unconfig 1216 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc 1217 1218bamboo_nand_config: unconfig 1219 @mkdir -p $(obj)include $(obj)board/amcc/bamboo 1220 @mkdir -p $(obj)nand_spl/board/amcc/bamboo 1221 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1222 @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc 1223 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp 1224 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1225 1226bubinga_config: unconfig 1227 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc 1228 1229CANBT_config: unconfig 1230 @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd 1231 1232# Arches, Canyonlands & Glacier use different U-Boot images 1233arches_config \ 1234canyonlands_config \ 1235glacier_config: unconfig 1236 @mkdir -p $(obj)include 1237 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1238 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1239 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1240 1241canyonlands_nand_config \ 1242glacier_nand_config: unconfig 1243 @mkdir -p $(obj)include $(obj)board/amcc/canyonlands 1244 @mkdir -p $(obj)nand_spl/board/amcc/canyonlands 1245 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1246 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ 1247 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1248 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1249 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp 1250 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1251 1252CATcenter_config \ 1253CATcenter_25_config \ 1254CATcenter_33_config: unconfig 1255 @mkdir -p $(obj)include 1256 @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h 1257 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h 1258 @[ -z "$(findstring _25,$@)" ] || \ 1259 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ 1260 $(XECHO) "SysClk = 25MHz" ; \ 1261 } 1262 @[ -z "$(findstring _33,$@)" ] || \ 1263 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ 1264 $(XECHO) "SysClk = 33MHz" ; \ 1265 } 1266 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1267 1268CMS700_config: unconfig 1269 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd 1270 1271CPCI2DP_config: unconfig 1272 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd 1273 1274CPCI405_config \ 1275CPCI4052_config \ 1276CPCI405DT_config \ 1277CPCI405AB_config: unconfig 1278 @mkdir -p $(obj)board/esd/cpci405 1279 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1280 1281CPCIISER4_config: unconfig 1282 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd 1283 1284CRAYL1_config: unconfig 1285 @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray 1286 1287csb272_config: unconfig 1288 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 1289 1290csb472_config: unconfig 1291 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 1292 1293DASA_SIM_config: unconfig 1294 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd 1295 1296DP405_config: unconfig 1297 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd 1298 1299DU405_config: unconfig 1300 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd 1301 1302DU440_config: unconfig 1303 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd 1304 1305ebony_config: unconfig 1306 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc 1307 1308ERIC_config: unconfig 1309 @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric 1310 1311EXBITGEN_config: unconfig 1312 @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen 1313 1314fx12mm_flash_config: unconfig 1315 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1316 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1317 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1318 > $(obj)board/avnet/fx12mm/config.tmp 1319 @echo "TEXT_BASE := 0xFFCB0000" \ 1320 >> $(obj)board/avnet/fx12mm/config.tmp 1321 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1322 1323fx12mm_config: unconfig 1324 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1325 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1326 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1327 > $(obj)board/avnet/fx12mm/config.tmp 1328 @echo "TEXT_BASE := 0x03000000" \ 1329 >> $(obj)board/avnet/fx12mm/config.tmp 1330 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1331 1332G2000_config: unconfig 1333 @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 1334 1335gdppc440etx_config: unconfig 1336 @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys 1337 1338hcu4_config: unconfig 1339 @mkdir -p $(obj)board/netstal/common 1340 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal 1341 1342hcu5_config: unconfig 1343 @mkdir -p $(obj)board/netstal/common 1344 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal 1345 1346HH405_config: unconfig 1347 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd 1348 1349HUB405_config: unconfig 1350 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd 1351 1352JSE_config: unconfig 1353 @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse 1354 1355KAREF_config: unconfig 1356 @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst 1357 1358katmai_config: unconfig 1359 @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc 1360 1361# Kilauea & Haleakala images are identical (recognized via PVR) 1362kilauea_config \ 1363haleakala_config: unconfig 1364 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1365 1366kilauea_nand_config \ 1367haleakala_nand_config: unconfig 1368 @mkdir -p $(obj)include $(obj)board/amcc/kilauea 1369 @mkdir -p $(obj)nand_spl/board/amcc/kilauea 1370 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1371 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1372 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp 1373 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1374 1375korat_config: unconfig 1376 @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat 1377 1378luan_config: unconfig 1379 @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc 1380 1381lwmon5_config: unconfig 1382 @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 1383 1384makalu_config: unconfig 1385 @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc 1386 1387mcu25_config: unconfig 1388 @mkdir -p $(obj)board/netstal/common 1389 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal 1390 1391METROBOX_config: unconfig 1392 @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst 1393 1394MIP405_config: unconfig 1395 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl 1396 1397MIP405T_config: unconfig 1398 @mkdir -p $(obj)include 1399 @echo "#define CONFIG_MIP405T" >$(obj)include/config.h 1400 @$(XECHO) "Enable subset config for MIP405T" 1401 @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl 1402 1403ML2_config: unconfig 1404 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 1405 1406ml300_config: unconfig 1407 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx 1408 1409ml507_flash_config: unconfig 1410 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1411 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1412 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1413 > $(obj)board/xilinx/ml507/config.tmp 1414 @echo "TEXT_BASE := 0xFE360000" \ 1415 >> $(obj)board/xilinx/ml507/config.tmp 1416 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1417 1418ml507_config: unconfig 1419 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1420 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1421 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1422 > $(obj)board/xilinx/ml507/config.tmp 1423 @echo "TEXT_BASE := 0x04000000" \ 1424 >> $(obj)board/xilinx/ml507/config.tmp 1425 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1426 1427neo_config: unconfig 1428 @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys 1429 1430ocotea_config: unconfig 1431 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc 1432 1433OCRTC_config \ 1434ORSG_config: unconfig 1435 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd 1436 1437p3p440_config: unconfig 1438 @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive 1439 1440PCI405_config: unconfig 1441 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd 1442 1443pcs440ep_config: unconfig 1444 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep 1445 1446PIP405_config: unconfig 1447 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl 1448 1449PLU405_config: unconfig 1450 @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd 1451 1452PMC405_config: unconfig 1453 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd 1454 1455PMC440_config: unconfig 1456 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd 1457 1458PPChameleonEVB_config \ 1459PPChameleonEVB_BA_25_config \ 1460PPChameleonEVB_ME_25_config \ 1461PPChameleonEVB_HI_25_config \ 1462PPChameleonEVB_BA_33_config \ 1463PPChameleonEVB_ME_33_config \ 1464PPChameleonEVB_HI_33_config: unconfig 1465 @mkdir -p $(obj)include 1466 @[ -z "$(findstring EVB_BA,$@)" ] || \ 1467 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ 1468 $(XECHO) "... BASIC model" ; \ 1469 } 1470 @[ -z "$(findstring EVB_ME,$@)" ] || \ 1471 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ 1472 $(XECHO) "... MEDIUM model" ; \ 1473 } 1474 @[ -z "$(findstring EVB_HI,$@)" ] || \ 1475 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ 1476 $(XECHO) "... HIGH-END model" ; \ 1477 } 1478 @[ -z "$(findstring _25,$@)" ] || \ 1479 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ 1480 $(XECHO) "SysClk = 25MHz" ; \ 1481 } 1482 @[ -z "$(findstring _33,$@)" ] || \ 1483 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ 1484 $(XECHO) "SysClk = 33MHz" ; \ 1485 } 1486 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1487 1488quad100hd_config: unconfig 1489 @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd 1490 1491redwood_config: unconfig 1492 @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc 1493 1494sbc405_config: unconfig 1495 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 1496 1497sc3_config:unconfig 1498 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 1499 1500sequoia_config \ 1501rainier_config: unconfig 1502 @mkdir -p $(obj)include 1503 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1504 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1505 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1506 1507sequoia_nand_config \ 1508rainier_nand_config: unconfig 1509 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1510 @mkdir -p $(obj)nand_spl/board/amcc/sequoia 1511 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1512 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1513 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1514 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1515 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1516 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1517 1518sequoia_ramboot_config \ 1519rainier_ramboot_config: unconfig 1520 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1521 @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h 1522 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1523 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1524 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1525 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1526 @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ 1527 $(obj)board/amcc/sequoia/config.tmp 1528 1529taihu_config: unconfig 1530 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc 1531 1532taishan_config: unconfig 1533 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc 1534 1535v5fx30teval_config: unconfig 1536 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1537 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1538 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1539 > $(obj)board/avnet/v5fx30teval/config.tmp 1540 @echo "TEXT_BASE := 0x03000000" \ 1541 >> $(obj)board/avnet/v5fx30teval/config.tmp 1542 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1543 1544v5fx30teval_flash_config: unconfig 1545 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1546 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1547 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1548 > $(obj)board/avnet/v5fx30teval/config.tmp 1549 @echo "TEXT_BASE := 0xFF1C0000" \ 1550 >> $(obj)board/avnet/v5fx30teval/config.tmp 1551 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1552 1553VOH405_config: unconfig 1554 @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd 1555 1556VOM405_config: unconfig 1557 @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd 1558 1559W7OLMC_config \ 1560W7OLMG_config: unconfig 1561 @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o 1562 1563# Walnut & Sycamore images are identical (recognized via PVR) 1564walnut_config \ 1565sycamore_config: unconfig 1566 @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc 1567 1568WUH405_config: unconfig 1569 @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd 1570 1571xilinx-ppc405-generic_flash_config: unconfig 1572 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1573 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1574 > $(obj)board/xilinx/ppc405-generic/config.tmp 1575 @echo "TEXT_BASE := 0xFE360000" \ 1576 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1577 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1578 1579xilinx-ppc405-generic_config: unconfig 1580 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1581 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1582 > $(obj)board/xilinx/ppc405-generic/config.tmp 1583 @echo "TEXT_BASE := 0x04000000" \ 1584 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1585 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1586 1587xilinx-ppc440-generic_flash_config: unconfig 1588 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1589 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1590 > $(obj)board/xilinx/ppc440-generic/config.tmp 1591 @echo "TEXT_BASE := 0xFE360000" \ 1592 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1593 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1594 1595xilinx-ppc440-generic_config: unconfig 1596 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1597 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1598 > $(obj)board/xilinx/ppc440-generic/config.tmp 1599 @echo "TEXT_BASE := 0x04000000" \ 1600 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1601 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1602 1603XPEDITE1K_config: unconfig 1604 @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k 1605 1606yosemite_config \ 1607yellowstone_config: unconfig 1608 @mkdir -p $(obj)include 1609 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1610 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1611 @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc 1612 1613yucca_config: unconfig 1614 @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc 1615 1616zeus_config: unconfig 1617 @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus 1618 1619######################################################################### 1620## MPC8220 Systems 1621######################################################################### 1622 1623Alaska8220_config \ 1624Yukon8220_config: unconfig 1625 @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska 1626 1627sorcery_config: unconfig 1628 @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery 1629 1630######################################################################### 1631## MPC824x Systems 1632######################################################################### 1633xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1634 1635A3000_config: unconfig 1636 @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 1637 1638barco_config: unconfig 1639 @$(MKCONFIG) $(@:_config=) ppc mpc824x barco 1640 1641BMW_config: unconfig 1642 @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw 1643 1644CPC45_config \ 1645CPC45_ROMBOOT_config: unconfig 1646 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 1647 @cd $(obj)include ; \ 1648 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1649 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1650 $(XECHO) "... booting from 8-bit flash" ; \ 1651 else \ 1652 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1653 $(XECHO) "... booting from 64-bit flash" ; \ 1654 fi; \ 1655 echo "export CONFIG_BOOT_ROM" >> config.mk; 1656 1657CU824_config: unconfig 1658 @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 1659 1660debris_config: unconfig 1661 @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin 1662 1663eXalion_config: unconfig 1664 @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion 1665 1666HIDDEN_DRAGON_config: unconfig 1667 @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon 1668 1669kvme080_config: unconfig 1670 @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin 1671 1672# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as 1673# time permits. 1674#linkstation_HDLAN_config \ 1675# Remove this line when HDLAN is fixed 1676linkstation_HGLAN_config: unconfig 1677 @mkdir -p $(obj)include 1678 @case $@ in \ 1679 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ 1680 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ 1681 esac 1682 @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation 1683 1684MOUSSE_config: unconfig 1685 @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse 1686 1687MUSENKI_config: unconfig 1688 @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki 1689 1690MVBLUE_config: unconfig 1691 @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue 1692 1693OXC_config: unconfig 1694 @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc 1695 1696PN62_config: unconfig 1697 @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 1698 1699Sandpoint8240_config: unconfig 1700 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1701 1702Sandpoint8245_config: unconfig 1703 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1704 1705sbc8240_config: unconfig 1706 @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 1707 1708SL8245_config: unconfig 1709 @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 1710 1711utx8245_config: unconfig 1712 @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 1713 1714######################################################################### 1715## MPC8260 Systems 1716######################################################################### 1717 1718atc_config: unconfig 1719 @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc 1720 1721cogent_mpc8260_config: unconfig 1722 @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent 1723 1724CPU86_config \ 1725CPU86_ROMBOOT_config: unconfig 1726 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 1727 @cd $(obj)include ; \ 1728 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1729 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1730 $(XECHO) "... booting from 8-bit flash" ; \ 1731 else \ 1732 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1733 $(XECHO) "... booting from 64-bit flash" ; \ 1734 fi; \ 1735 echo "export CONFIG_BOOT_ROM" >> config.mk; 1736 1737CPU87_config \ 1738CPU87_ROMBOOT_config: unconfig 1739 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 1740 @cd $(obj)include ; \ 1741 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1742 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1743 $(XECHO) "... booting from 8-bit flash" ; \ 1744 else \ 1745 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1746 $(XECHO) "... booting from 64-bit flash" ; \ 1747 fi; \ 1748 echo "export CONFIG_BOOT_ROM" >> config.mk; 1749 1750ep8248_config \ 1751ep8248E_config : unconfig 1752 @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 1753 1754ep8260_config: unconfig 1755 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 1756 1757ep82xxm_config: unconfig 1758 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm 1759 1760gw8260_config: unconfig 1761 @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 1762 1763hymod_config: unconfig 1764 @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod 1765 1766IDS8247_config: unconfig 1767 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 1768 1769IPHASE4539_config: unconfig 1770 @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 1771 1772ISPAN_config \ 1773ISPAN_REVB_config: unconfig 1774 @mkdir -p $(obj)include 1775 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1776 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ 1777 fi 1778 @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan 1779 1780mgcoge_config : unconfig 1781 @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile 1782 1783MPC8260ADS_config \ 1784MPC8260ADS_lowboot_config \ 1785MPC8260ADS_33MHz_config \ 1786MPC8260ADS_33MHz_lowboot_config \ 1787MPC8260ADS_40MHz_config \ 1788MPC8260ADS_40MHz_lowboot_config \ 1789MPC8272ADS_config \ 1790MPC8272ADS_lowboot_config \ 1791PQ2FADS_config \ 1792PQ2FADS_lowboot_config \ 1793PQ2FADS-VR_config \ 1794PQ2FADS-VR_lowboot_config \ 1795PQ2FADS-ZU_config \ 1796PQ2FADS-ZU_lowboot_config \ 1797PQ2FADS-ZU_66MHz_config \ 1798PQ2FADS-ZU_66MHz_lowboot_config \ 1799 : unconfig 1800 @mkdir -p $(obj)include 1801 @mkdir -p $(obj)board/freescale/mpc8260ads 1802 $(if $(findstring PQ2FADS,$@), \ 1803 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ 1804 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) 1805 $(if $(findstring MHz,$@), \ 1806 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ 1807 $(if $(findstring VR,$@), \ 1808 @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) 1809 @[ -z "$(findstring lowboot_,$@)" ] || \ 1810 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ 1811 $(XECHO) "... with lowboot configuration" ; \ 1812 } 1813 @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale 1814 1815MPC8266ADS_config: unconfig 1816 @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale 1817 1818muas3001_dev_config \ 1819muas3001_config : unconfig 1820 @mkdir -p $(obj)include 1821 @mkdir -p $(obj)board/muas3001 1822 @if [ "$(findstring dev,$@)" ] ; then \ 1823 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ 1824 fi 1825 @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 1826 1827# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1828PM825_config \ 1829PM825_ROMBOOT_config \ 1830PM825_BIGFLASH_config \ 1831PM825_ROMBOOT_BIGFLASH_config \ 1832PM826_config \ 1833PM826_ROMBOOT_config \ 1834PM826_BIGFLASH_config \ 1835PM826_ROMBOOT_BIGFLASH_config: unconfig 1836 @mkdir -p $(obj)include 1837 @mkdir -p $(obj)board/pm826 1838 @if [ "$(findstring PM825_,$@)" ] ; then \ 1839 echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ 1840 else \ 1841 >$(obj)include/config.h ; \ 1842 fi 1843 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1844 $(XECHO) "... booting from 8-bit flash" ; \ 1845 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1846 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1847 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1848 $(XECHO) "... with 32 MB Flash" ; \ 1849 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1850 fi; \ 1851 else \ 1852 $(XECHO) "... booting from 64-bit flash" ; \ 1853 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1854 $(XECHO) "... with 32 MB Flash" ; \ 1855 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1856 echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ 1857 else \ 1858 echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ 1859 fi; \ 1860 fi 1861 @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 1862 1863PM828_config \ 1864PM828_PCI_config \ 1865PM828_ROMBOOT_config \ 1866PM828_ROMBOOT_PCI_config: unconfig 1867 @mkdir -p $(obj)include 1868 @mkdir -p $(obj)board/pm826 1869 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1870 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 1871 $(XECHO) "... with PCI enabled" ; \ 1872 fi 1873 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1874 $(XECHO) "... booting from 8-bit flash" ; \ 1875 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1876 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1877 fi 1878 @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 1879 1880ppmc8260_config: unconfig 1881 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 1882 1883Rattler8248_config \ 1884Rattler_config: unconfig 1885 @mkdir -p $(obj)include 1886 $(if $(findstring 8248,$@), \ 1887 @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) 1888 @$(MKCONFIG) -a Rattler ppc mpc8260 rattler 1889 1890RPXsuper_config: unconfig 1891 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper 1892 1893rsdproto_config: unconfig 1894 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto 1895 1896sacsng_config: unconfig 1897 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng 1898 1899sbc8260_config: unconfig 1900 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 1901 1902SCM_config: unconfig 1903 @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens 1904 1905TQM8255_AA_config \ 1906TQM8260_AA_config \ 1907TQM8260_AB_config \ 1908TQM8260_AC_config \ 1909TQM8260_AD_config \ 1910TQM8260_AE_config \ 1911TQM8260_AF_config \ 1912TQM8260_AG_config \ 1913TQM8260_AH_config \ 1914TQM8260_AI_config \ 1915TQM8265_AA_config: unconfig 1916 @mkdir -p $(obj)include 1917 @case "$@" in \ 1918 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1919 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1920 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1921 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1922 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1923 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1924 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1925 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1926 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1927 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1928 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1929 esac; \ 1930 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1931 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ 1932 fi; \ 1933 echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ 1934 echo "... with $${CFREQ}MHz system clock" ; \ 1935 if [ "$${CACHE}" = "yes" ] ; then \ 1936 echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1937 $(XECHO) "... with L2 Cache support" ; \ 1938 else \ 1939 echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1940 $(XECHO) "... without L2 Cache support" ; \ 1941 fi; \ 1942 if [ "$${BMODE}" = "60x" ] ; then \ 1943 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1944 $(XECHO) "... with 60x Bus Mode" ; \ 1945 else \ 1946 echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1947 $(XECHO) "... without 60x Bus Mode" ; \ 1948 fi 1949 @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc 1950 1951TQM8272_config: unconfig 1952 @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc 1953 1954VoVPN-GW_66MHz_config \ 1955VoVPN-GW_100MHz_config: unconfig 1956 @mkdir -p $(obj)include 1957 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h 1958 @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 1959 1960ZPC1900_config: unconfig 1961 @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 1962 1963######################################################################### 1964## Coldfire 1965######################################################################### 1966 1967M52277EVB_config \ 1968M52277EVB_spansion_config \ 1969M52277EVB_stmicro_config : unconfig 1970 @case "$@" in \ 1971 M52277EVB_config) FLASH=SPANSION;; \ 1972 M52277EVB_spansion_config) FLASH=SPANSION;; \ 1973 M52277EVB_stmicro_config) FLASH=STMICRO;; \ 1974 esac; \ 1975 if [ "$${FLASH}" = "SPANSION" ] ; then \ 1976 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 1977 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 1978 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ 1979 $(XECHO) "... with SPANSION boot..." ; \ 1980 fi; \ 1981 if [ "$${FLASH}" = "STMICRO" ] ; then \ 1982 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 1983 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 1984 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 1985 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ 1986 $(XECHO) "... with ST Micro boot..." ; \ 1987 fi 1988 @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale 1989 1990M5235EVB_config \ 1991M5235EVB_Flash16_config \ 1992M5235EVB_Flash32_config: unconfig 1993 @case "$@" in \ 1994 M5235EVB_config) FLASH=16;; \ 1995 M5235EVB_Flash16_config) FLASH=16;; \ 1996 M5235EVB_Flash32_config) FLASH=32;; \ 1997 esac; \ 1998 if [ "$${FLASH}" != "16" ] ; then \ 1999 echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ 2000 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2001 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2002 else \ 2003 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2004 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2005 fi 2006 @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale 2007 2008M5249EVB_config : unconfig 2009 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale 2010 2011M5253DEMO_config : unconfig 2012 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale 2013 2014M5253EVBE_config : unconfig 2015 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale 2016 2017cobra5272_config : unconfig 2018 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 2019 2020EB+MCF-EV123_config : unconfig 2021 @mkdir -p $(obj)include 2022 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2023 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2024 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2025 2026EB+MCF-EV123_internal_config : unconfig 2027 @mkdir -p $(obj)include 2028 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2029 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2030 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2031 2032idmr_config : unconfig 2033 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr 2034 2035M5271EVB_config : unconfig 2036 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale 2037 2038M5272C3_config : unconfig 2039 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale 2040 2041M5275EVB_config : unconfig 2042 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale 2043 2044M5282EVB_config : unconfig 2045 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale 2046 2047M53017EVB_config : unconfig 2048 @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale 2049 2050M5329AFEE_config \ 2051M5329BFEE_config : unconfig 2052 @case "$@" in \ 2053 M5329AFEE_config) NAND=0;; \ 2054 M5329BFEE_config) NAND=16;; \ 2055 esac; \ 2056 if [ "$${NAND}" != "0" ] ; then \ 2057 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2058 fi 2059 @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale 2060 2061M5373EVB_config : unconfig 2062 @case "$@" in \ 2063 M5373EVB_config) NAND=16;; \ 2064 esac; \ 2065 if [ "$${NAND}" != "0" ] ; then \ 2066 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2067 fi 2068 @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale 2069 2070M54451EVB_config \ 2071M54451EVB_spansion_config \ 2072M54451EVB_stmicro_config : unconfig 2073 @case "$@" in \ 2074 M54451EVB_config) FLASH=SPANSION;; \ 2075 M54451EVB_spansion_config) FLASH=SPANSION;; \ 2076 M54451EVB_stmicro_config) FLASH=STMICRO;; \ 2077 esac; \ 2078 if [ "$${FLASH}" = "SPANSION" ] ; then \ 2079 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 2080 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2081 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2082 $(XECHO) "... with SPANSION boot..." ; \ 2083 fi; \ 2084 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2085 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2086 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2087 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2088 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2089 $(XECHO) "... with ST Micro boot..." ; \ 2090 fi; \ 2091 echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; 2092 @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale 2093 2094M54455EVB_config \ 2095M54455EVB_atmel_config \ 2096M54455EVB_intel_config \ 2097M54455EVB_a33_config \ 2098M54455EVB_a66_config \ 2099M54455EVB_i33_config \ 2100M54455EVB_i66_config \ 2101M54455EVB_stm33_config : unconfig 2102 @case "$@" in \ 2103 M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ 2104 M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ 2105 M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ 2106 M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ 2107 M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ 2108 M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ 2109 M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ 2110 M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ 2111 esac; \ 2112 if [ "$${FLASH}" = "INTEL" ] ; then \ 2113 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ 2114 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2115 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2116 $(XECHO) "... with INTEL boot..." ; \ 2117 fi; \ 2118 if [ "$${FLASH}" = "ATMEL" ] ; then \ 2119 echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ 2120 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2121 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2122 $(XECHO) "... with ATMEL boot..." ; \ 2123 fi; \ 2124 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2125 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2126 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2127 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2128 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2129 $(XECHO) "... with ST Micro boot..." ; \ 2130 fi; \ 2131 echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ 2132 $(XECHO) "... with $${FREQ}Hz input clock" 2133 @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale 2134 2135M5475AFE_config \ 2136M5475BFE_config \ 2137M5475CFE_config \ 2138M5475DFE_config \ 2139M5475EFE_config \ 2140M5475FFE_config \ 2141M5475GFE_config : unconfig 2142 @case "$@" in \ 2143 M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2144 M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2145 M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2146 M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2147 M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2148 M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2149 M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2150 esac; \ 2151 echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ 2152 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2153 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2154 if [ "$${RAM1}" != "0" ] ; then \ 2155 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2156 fi; \ 2157 if [ "$${CODE}" != "0" ] ; then \ 2158 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2159 fi; \ 2160 if [ "$${VID}" == "1" ] ; then \ 2161 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2162 fi; \ 2163 if [ "$${USB}" == "1" ] ; then \ 2164 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2165 fi 2166 @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale 2167 2168M5485AFE_config \ 2169M5485BFE_config \ 2170M5485CFE_config \ 2171M5485DFE_config \ 2172M5485EFE_config \ 2173M5485FFE_config \ 2174M5485GFE_config \ 2175M5485HFE_config : unconfig 2176 @case "$@" in \ 2177 M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2178 M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2179 M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2180 M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2181 M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2182 M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2183 M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2184 M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ 2185 esac; \ 2186 echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ 2187 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2188 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2189 if [ "$${RAM1}" != "0" ] ; then \ 2190 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2191 fi; \ 2192 if [ "$${CODE}" != "0" ] ; then \ 2193 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2194 fi; \ 2195 if [ "$${VID}" == "1" ] ; then \ 2196 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2197 fi; \ 2198 if [ "$${USB}" == "1" ] ; then \ 2199 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2200 fi 2201 @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale 2202 2203TASREG_config : unconfig 2204 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd 2205 2206######################################################################### 2207## MPC83xx Systems 2208######################################################################### 2209 2210kmeter1_config: unconfig 2211 @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile 2212 2213MPC8313ERDB_33_config \ 2214MPC8313ERDB_66_config \ 2215MPC8313ERDB_NAND_33_config \ 2216MPC8313ERDB_NAND_66_config: unconfig 2217 @mkdir -p $(obj)include 2218 @mkdir -p $(obj)board/freescale/mpc8313erdb 2219 @if [ "$(findstring _33_,$@)" ] ; then \ 2220 $(XECHO) -n "...33M ..." ; \ 2221 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ 2222 fi ; \ 2223 if [ "$(findstring _66_,$@)" ] ; then \ 2224 $(XECHO) -n "...66M..." ; \ 2225 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ 2226 fi ; \ 2227 if [ "$(findstring _NAND_,$@)" ] ; then \ 2228 $(XECHO) -n "...NAND..." ; \ 2229 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ 2230 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ 2231 fi ; 2232 @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale 2233 @if [ "$(findstring _NAND_,$@)" ] ; then \ 2234 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ 2235 fi ; 2236 2237MPC8315ERDB_config: unconfig 2238 @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale 2239 2240MPC8323ERDB_config: unconfig 2241 @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale 2242 2243MPC832XEMDS_config \ 2244MPC832XEMDS_HOST_33_config \ 2245MPC832XEMDS_HOST_66_config \ 2246MPC832XEMDS_SLAVE_config \ 2247MPC832XEMDS_ATM_config: unconfig 2248 @mkdir -p $(obj)include 2249 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2250 $(XECHO) -n "... PCI HOST " ; \ 2251 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2252 fi ; \ 2253 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2254 $(XECHO) "...PCI SLAVE 66M" ; \ 2255 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2256 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2257 fi ; \ 2258 if [ "$(findstring _33_,$@)" ] ; then \ 2259 $(XECHO) -n "...33M ..." ; \ 2260 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2261 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2262 fi ; \ 2263 if [ "$(findstring _66_,$@)" ] ; then \ 2264 $(XECHO) -n "...66M..." ; \ 2265 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2266 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2267 fi ; \ 2268 if [ "$(findstring _ATM_,$@)" ] ; then \ 2269 $(XECHO) -n "...ATM..." ; \ 2270 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2271 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2272 fi ; 2273 @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale 2274 2275MPC8349EMDS_config: unconfig 2276 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale 2277 2278MPC8349ITX_config \ 2279MPC8349ITX_LOWBOOT_config \ 2280MPC8349ITXGP_config: unconfig 2281 @mkdir -p $(obj)include 2282 @mkdir -p $(obj)board/freescale/mpc8349itx 2283 @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h 2284 @if [ "$(findstring GP,$@)" ] ; then \ 2285 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2286 fi 2287 @if [ "$(findstring LOWBOOT,$@)" ] ; then \ 2288 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2289 fi 2290 @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale 2291 2292MPC8360EMDS_config \ 2293MPC8360EMDS_HOST_33_config \ 2294MPC8360EMDS_HOST_66_config \ 2295MPC8360EMDS_SLAVE_config \ 2296MPC8360EMDS_ATM_config: unconfig 2297 @mkdir -p $(obj)include 2298 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2299 $(XECHO) -n "... PCI HOST " ; \ 2300 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2301 fi ; \ 2302 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2303 $(XECHO) "...PCI SLAVE 66M" ; \ 2304 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2305 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2306 fi ; \ 2307 if [ "$(findstring _33_,$@)" ] ; then \ 2308 $(XECHO) -n "...33M ..." ; \ 2309 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2310 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2311 fi ; \ 2312 if [ "$(findstring _66_,$@)" ] ; then \ 2313 $(XECHO) -n "...66M..." ; \ 2314 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2315 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2316 fi ; \ 2317 if [ "$(findstring _ATM_,$@)" ] ; then \ 2318 $(XECHO) -n "...ATM..." ; \ 2319 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2320 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2321 fi ; 2322 @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale 2323 2324MPC8360ERDK_33_config \ 2325MPC8360ERDK_66_config \ 2326MPC8360ERDK_config: unconfig 2327 @mkdir -p $(obj)include 2328 @if [ "$(findstring _33_,$@)" ] ; then \ 2329 $(XECHO) -n "... CLKIN 33MHz " ; \ 2330 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ 2331 fi ; 2332 @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale 2333 2334MPC837XEMDS_config \ 2335MPC837XEMDS_HOST_config: unconfig 2336 @mkdir -p $(obj)include 2337 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2338 $(XECHO) -n "... PCI HOST " ; \ 2339 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2340 fi ; 2341 @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale 2342 2343MPC837XERDB_config: unconfig 2344 @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale 2345 2346MVBLM7_config: unconfig 2347 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision 2348 2349sbc8349_config: unconfig 2350 @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 2351 2352SIMPC8313_LP_config \ 2353SIMPC8313_SP_config: unconfig 2354 @mkdir -p $(obj)include 2355 @mkdir -p $(obj)board/sheldon/simpc8313 2356 @if [ "$(findstring _LP_,$@)" ] ; then \ 2357 $(XECHO) -n "...Large Page NAND..." ; \ 2358 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ 2359 fi ; \ 2360 if [ "$(findstring _SP_,$@)" ] ; then \ 2361 $(XECHO) -n "...Small Page NAND..." ; \ 2362 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ 2363 fi ; 2364 @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon 2365 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 2366 2367TQM834x_config: unconfig 2368 @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc 2369 2370 2371######################################################################### 2372## MPC85xx Systems 2373######################################################################### 2374 2375ATUM8548_config: unconfig 2376 @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 2377 2378MPC8536DS_config: unconfig 2379 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8536ds freescale 2380 2381MPC8540ADS_config: unconfig 2382 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale 2383 2384MPC8540EVAL_config \ 2385MPC8540EVAL_33_config \ 2386MPC8540EVAL_66_config \ 2387MPC8540EVAL_33_slave_config \ 2388MPC8540EVAL_66_slave_config: unconfig 2389 @mkdir -p $(obj)include 2390 @if [ "$(findstring _33_,$@)" ] ; then \ 2391 $(XECHO) "... 33 MHz PCI" ; \ 2392 else \ 2393 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ 2394 $(XECHO) "... 66 MHz PCI" ; \ 2395 fi ; \ 2396 if [ "$(findstring _slave_,$@)" ] ; then \ 2397 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ 2398 $(XECHO) " slave" ; \ 2399 else \ 2400 $(XECHO) " host" ; \ 2401 fi 2402 @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval 2403 2404MPC8560ADS_config: unconfig 2405 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale 2406 2407MPC8541CDS_legacy_config \ 2408MPC8541CDS_config: unconfig 2409 @mkdir -p $(obj)include 2410 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2411 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2412 $(XECHO) "... legacy" ; \ 2413 fi 2414 @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale 2415 2416MPC8544DS_config: unconfig 2417 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale 2418 2419MPC8548CDS_legacy_config \ 2420MPC8548CDS_config: unconfig 2421 @mkdir -p $(obj)include 2422 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2423 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2424 $(XECHO) "... legacy" ; \ 2425 fi 2426 @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale 2427 2428MPC8555CDS_legacy_config \ 2429MPC8555CDS_config: unconfig 2430 @mkdir -p $(obj)include 2431 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2432 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2433 $(XECHO) "... legacy" ; \ 2434 fi 2435 @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale 2436 2437MPC8568MDS_config: unconfig 2438 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale 2439 2440MPC8569MDS_config: unconfig 2441 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale 2442 2443MPC8572DS_36BIT_config \ 2444MPC8572DS_config: unconfig 2445 @mkdir -p $(obj)include 2446 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2447 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2448 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2449 fi 2450 @$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale 2451 2452P2020DS_36BIT_config \ 2453P2020DS_config: unconfig 2454 @mkdir -p $(obj)include 2455 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2456 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2457 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2458 fi 2459 @$(MKCONFIG) -a P2020DS ppc mpc85xx p2020ds freescale 2460 2461PM854_config: unconfig 2462 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 2463 2464PM856_config: unconfig 2465 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 2466 2467sbc8540_config \ 2468sbc8540_33_config \ 2469sbc8540_66_config: unconfig 2470 @mkdir -p $(obj)include 2471 @if [ "$(findstring _66_,$@)" ] ; then \ 2472 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2473 $(XECHO) "... 66 MHz PCI" ; \ 2474 else \ 2475 $(XECHO) "... 33 MHz PCI" ; \ 2476 fi 2477 @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 2478 2479sbc8548_config: unconfig 2480 @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 2481 2482sbc8560_config \ 2483sbc8560_33_config \ 2484sbc8560_66_config: unconfig 2485 @mkdir -p $(obj)include 2486 @if [ "$(findstring _66_,$@)" ] ; then \ 2487 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2488 $(XECHO) "... 66 MHz PCI" ; \ 2489 else \ 2490 $(XECHO) "... 33 MHz PCI" ; \ 2491 fi 2492 @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 2493 2494socrates_config: unconfig 2495 @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates 2496 2497stxgp3_config: unconfig 2498 @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 2499 2500stxssa_config \ 2501stxssa_4M_config: unconfig 2502 @mkdir -p $(obj)include 2503 @if [ "$(findstring _4M_,$@)" ] ; then \ 2504 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ 2505 $(XECHO) "... with 4 MiB flash memory" ; \ 2506 fi 2507 @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa 2508 2509TQM8540_config \ 2510TQM8541_config \ 2511TQM8548_config \ 2512TQM8548_AG_config \ 2513TQM8548_BE_config \ 2514TQM8555_config \ 2515TQM8560_config: unconfig 2516 @mkdir -p $(obj)include 2517 @BTYPE=$(@:_config=); \ 2518 CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ 2519 $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ 2520 echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ 2521 echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ 2522 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ 2523 echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; 2524 @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc 2525 @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; 2526 2527XPEDITE5200_config: unconfig 2528 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes 2529 2530XPEDITE5370_config: unconfig 2531 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes 2532 2533######################################################################### 2534## MPC86xx Systems 2535######################################################################### 2536 2537MPC8610HPCD_config: unconfig 2538 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale 2539 2540MPC8641HPCN_36BIT_config \ 2541MPC8641HPCN_config: unconfig 2542 @mkdir -p $(obj)include 2543 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2544 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2545 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2546 fi 2547 @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale 2548 2549sbc8641d_config: unconfig 2550 @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d 2551 2552XPEDITE5170_config: unconfig 2553 @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes 2554 2555######################################################################### 2556## 74xx/7xx Systems 2557######################################################################### 2558 2559AmigaOneG3SE_config: unconfig 2560 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 2561 2562BAB7xx_config: unconfig 2563 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec 2564 2565CPCI750_config: unconfig 2566 @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd 2567 2568DB64360_config: unconfig 2569 @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell 2570 2571DB64460_config: unconfig 2572 @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell 2573 2574ELPPC_config: unconfig 2575 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec 2576 2577EVB64260_config \ 2578EVB64260_750CX_config: unconfig 2579 @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 2580 2581mpc7448hpc2_config: unconfig 2582 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale 2583 2584P3G4_config: unconfig 2585 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2586 2587p3m750_config \ 2588p3m7448_config: unconfig 2589 @mkdir -p $(obj)include 2590 @if [ "$(findstring 750_,$@)" ] ; then \ 2591 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ 2592 else \ 2593 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ 2594 fi 2595 @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive 2596 2597PCIPPC2_config \ 2598PCIPPC6_config: unconfig 2599 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 2600 2601ppmc7xx_config: unconfig 2602 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx 2603 2604ZUMA_config: unconfig 2605 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2606 2607#======================================================================== 2608# ARM 2609#======================================================================== 2610######################################################################### 2611## StrongARM Systems 2612######################################################################### 2613 2614assabet_config : unconfig 2615 @$(MKCONFIG) $(@:_config=) arm sa1100 assabet 2616 2617dnp1110_config : unconfig 2618 @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 2619 2620gcplus_config : unconfig 2621 @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus 2622 2623lart_config : unconfig 2624 @$(MKCONFIG) $(@:_config=) arm sa1100 lart 2625 2626shannon_config : unconfig 2627 @$(MKCONFIG) $(@:_config=) arm sa1100 shannon 2628 2629######################################################################### 2630## ARM92xT Systems 2631######################################################################### 2632 2633######################################################################### 2634## Atmel AT91RM9200 Systems 2635######################################################################### 2636 2637at91rm9200dk_config : unconfig 2638 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 2639 2640at91rm9200ek_config : unconfig 2641 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200 2642 2643cmc_pu2_config : unconfig 2644 @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 2645 2646csb637_config : unconfig 2647 @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 2648 2649kb9202_config : unconfig 2650 @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 2651 2652m501sk_config : unconfig 2653 @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 2654 2655mp2usb_config : unconfig 2656 @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 2657 2658######################################################################### 2659## Atmel ARM926EJ-S Systems 2660######################################################################### 2661 2662afeb9260_config: unconfig 2663 @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 2664 2665at91cap9adk_config : unconfig 2666 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 2667 2668at91sam9260ek_nandflash_config \ 2669at91sam9260ek_dataflash_cs0_config \ 2670at91sam9260ek_dataflash_cs1_config \ 2671at91sam9260ek_config \ 2672at91sam9g20ek_nandflash_config \ 2673at91sam9g20ek_dataflash_cs0_config \ 2674at91sam9g20ek_dataflash_cs1_config \ 2675at91sam9g20ek_config : unconfig 2676 @mkdir -p $(obj)include 2677 @if [ "$(findstring 9g20,$@)" ] ; then \ 2678 echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ 2679 $(XECHO) "... 9G20 Variant" ; \ 2680 else \ 2681 echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ 2682 fi; 2683 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2684 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2685 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2686 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2687 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2688 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2689 else \ 2690 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2691 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2692 fi; 2693 @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2694 2695at91sam9xeek_nandflash_config \ 2696at91sam9xeek_dataflash_cs0_config \ 2697at91sam9xeek_dataflash_cs1_config \ 2698at91sam9xeek_config : unconfig 2699 @mkdir -p $(obj)include 2700 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2701 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2702 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2703 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2704 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2705 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2706 else \ 2707 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2708 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2709 fi; 2710 @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2711 2712at91sam9261ek_nandflash_config \ 2713at91sam9261ek_dataflash_cs0_config \ 2714at91sam9261ek_dataflash_cs3_config \ 2715at91sam9261ek_config \ 2716at91sam9g10ek_nandflash_config \ 2717at91sam9g10ek_dataflash_cs0_config \ 2718at91sam9g10ek_dataflash_cs3_config \ 2719at91sam9g10ek_config : unconfig 2720 @mkdir -p $(obj)include 2721 @if [ "$(findstring 9g10,$@)" ] ; then \ 2722 echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ 2723 $(XECHO) "... 9G10 Variant" ; \ 2724 else \ 2725 echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ 2726 fi; 2727 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2728 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2729 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2730 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2731 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ 2732 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ 2733 else \ 2734 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2735 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2736 fi; 2737 @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 2738 2739at91sam9263ek_norflash_config \ 2740at91sam9263ek_norflash_boot_config \ 2741at91sam9263ek_nandflash_config \ 2742at91sam9263ek_dataflash_config \ 2743at91sam9263ek_dataflash_cs0_config \ 2744at91sam9263ek_config : unconfig 2745 @mkdir -p $(obj)include 2746 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2747 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2748 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2749 elif [ "$(findstring norflash,$@)" ] ; then \ 2750 echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ 2751 $(XECHO) "... with environment variable in NOR FLASH" ; \ 2752 else \ 2753 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2754 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2755 fi; 2756 @if [ "$(findstring norflash_boot,$@)" ] ; then \ 2757 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ 2758 $(XECHO) "... and boot from NOR FLASH" ; \ 2759 fi; 2760 @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 2761 2762at91sam9rlek_nandflash_config \ 2763at91sam9rlek_dataflash_config \ 2764at91sam9rlek_dataflash_cs0_config \ 2765at91sam9rlek_config : unconfig 2766 @mkdir -p $(obj)include 2767 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2768 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2769 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2770 else \ 2771 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2772 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2773 fi; 2774 @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 2775 2776meesc_config : unconfig 2777 @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 2778 2779pm9261_config : unconfig 2780 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 2781 2782at91sam9m10g45ek_nandflash_config \ 2783at91sam9m10g45ek_dataflash_config \ 2784at91sam9m10g45ek_dataflash_cs0_config \ 2785at91sam9m10g45ek_config \ 2786at91sam9g45ekes_nandflash_config \ 2787at91sam9g45ekes_dataflash_config \ 2788at91sam9g45ekes_dataflash_cs0_config \ 2789at91sam9g45ekes_config : unconfig 2790 @mkdir -p $(obj)include 2791 @if [ "$(findstring 9m10,$@)" ] ; then \ 2792 echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ 2793 $(XECHO) "... 9M10G45 Variant" ; \ 2794 else \ 2795 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ 2796 fi; 2797 2798 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2799 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2800 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2801 else \ 2802 echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ 2803 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2804 fi; 2805 @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 2806 2807pm9263_config : unconfig 2808 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 2809 2810######################################################################## 2811## ARM Integrator boards - see doc/README-integrator for more info. 2812integratorap_config \ 2813ap_config \ 2814ap966_config \ 2815ap922_config \ 2816ap922_XA10_config \ 2817ap7_config \ 2818ap720t_config \ 2819ap920t_config \ 2820ap926ejs_config \ 2821ap946es_config: unconfig 2822 @board/armltd/integrator/split_by_variant.sh ap $@ 2823 2824integratorcp_config \ 2825cp_config \ 2826cp920t_config \ 2827cp926ejs_config \ 2828cp946es_config \ 2829cp1136_config \ 2830cp966_config \ 2831cp922_config \ 2832cp922_XA10_config \ 2833cp1026_config: unconfig 2834 @board/armltd/integrator/split_by_variant.sh cp $@ 2835 2836davinci_dvevm_config : unconfig 2837 @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci 2838 2839davinci_schmoogie_config : unconfig 2840 @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci 2841 2842davinci_sffsdr_config : unconfig 2843 @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci 2844 2845davinci_sonata_config : unconfig 2846 @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci 2847 2848davinci_dm355evm_config : unconfig 2849 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci 2850 2851lpd7a400_config \ 2852lpd7a404_config: unconfig 2853 @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x 2854 2855mx1ads_config : unconfig 2856 @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx 2857 2858mx1fs2_config : unconfig 2859 @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx 2860 2861netstar_config: unconfig 2862 @$(MKCONFIG) $(@:_config=) arm arm925t netstar 2863 2864nhk8815_config \ 2865nhk8815_onenand_config: unconfig 2866 @mkdir -p $(obj)include 2867 @ > $(obj)include/config.h 2868 @if [ "$(findstring _onenand, $@)" ] ; then \ 2869 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ 2870 $(XECHO) "... configured to boot from OneNand Flash"; \ 2871 else \ 2872 $(XECHO) "... configured to boot from Nand Flash"; \ 2873 fi 2874 @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik 2875 2876omap1510inn_config : unconfig 2877 @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn 2878 2879xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 2880 2881omap1610inn_config \ 2882omap1610inn_cs0boot_config \ 2883omap1610inn_cs3boot_config \ 2884omap1610inn_cs_autoboot_config \ 2885omap1610h2_config \ 2886omap1610h2_cs0boot_config \ 2887omap1610h2_cs3boot_config \ 2888omap1610h2_cs_autoboot_config: unconfig 2889 @mkdir -p $(obj)include 2890 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2891 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ 2892 $(XECHO) "... configured for CS0 boot"; \ 2893 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 2894 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ 2895 $(XECHO) "... configured for CS_AUTO boot"; \ 2896 else \ 2897 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2898 $(XECHO) "... configured for CS3 boot"; \ 2899 fi; 2900 @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap 2901 2902omap5912osk_config : unconfig 2903 @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap 2904 2905xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 2906 2907omap730p2_config \ 2908omap730p2_cs0boot_config \ 2909omap730p2_cs3boot_config : unconfig 2910 @mkdir -p $(obj)include 2911 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2912 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ 2913 $(XECHO) "... configured for CS0 boot"; \ 2914 else \ 2915 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2916 $(XECHO) "... configured for CS3 boot"; \ 2917 fi; 2918 @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap 2919 2920sbc2410x_config: unconfig 2921 @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 2922 2923scb9328_config : unconfig 2924 @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx 2925 2926smdk2400_config : unconfig 2927 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 2928 2929smdk2410_config : unconfig 2930 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 2931 2932SX1_stdout_serial_config \ 2933SX1_config: unconfig 2934 @mkdir -p $(obj)include 2935 @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ 2936 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 2937 $(XECHO) "... configured for stdout serial"; \ 2938 else \ 2939 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 2940 $(XECHO) "... configured for stdout usbtty"; \ 2941 fi; 2942 @$(MKCONFIG) SX1 arm arm925t sx1 2943 2944# TRAB default configuration: 8 MB Flash, 32 MB RAM 2945xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 2946 2947trab_config \ 2948trab_bigram_config \ 2949trab_bigflash_config \ 2950trab_old_config: unconfig 2951 @mkdir -p $(obj)include 2952 @mkdir -p $(obj)board/trab 2953 @[ -z "$(findstring _bigram,$@)" ] || \ 2954 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2955 echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ 2956 $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ 2957 } 2958 @[ -z "$(findstring _bigflash,$@)" ] || \ 2959 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ 2960 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2961 $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ 2962 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2963 } 2964 @[ -z "$(findstring _old,$@)" ] || \ 2965 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2966 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2967 $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ 2968 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2969 } 2970 @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 2971 2972VCMA9_config : unconfig 2973 @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 2974 2975######################################################################### 2976# ARM supplied Versatile development boards 2977######################################################################### 2978 2979cm4008_config : unconfig 2980 @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 2981 2982cm41xx_config : unconfig 2983 @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 2984 2985versatile_config \ 2986versatileab_config \ 2987versatilepb_config : unconfig 2988 @board/armltd/versatile/split_by_variant.sh $@ 2989 2990voiceblue_config: unconfig 2991 @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue 2992 2993######################################################################### 2994## S3C44B0 Systems 2995######################################################################### 2996 2997B2_config : unconfig 2998 @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave 2999 3000######################################################################### 3001## ARM720T Systems 3002######################################################################### 3003 3004armadillo_config: unconfig 3005 @$(MKCONFIG) $(@:_config=) arm arm720t armadillo 3006 3007ep7312_config : unconfig 3008 @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 3009 3010impa7_config : unconfig 3011 @$(MKCONFIG) $(@:_config=) arm arm720t impa7 3012 3013modnet50_config : unconfig 3014 @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 3015 3016evb4510_config : unconfig 3017 @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b 3018 3019lpc2292sodimm_config: unconfig 3020 @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 3021 3022SMN42_config : unconfig 3023 @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 3024 3025######################################################################### 3026## ARM CORTEX Systems 3027######################################################################### 3028 3029omap3_beagle_config : unconfig 3030 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3 3031 3032omap3_overo_config : unconfig 3033 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3 3034 3035omap3_evm_config : unconfig 3036 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3 3037 3038omap3_pandora_config : unconfig 3039 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3 3040 3041omap3_zoom1_config : unconfig 3042 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 3043 3044omap3_zoom2_config : unconfig 3045 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3 3046 3047######################################################################### 3048## XScale Systems 3049######################################################################### 3050 3051actux1_config : unconfig 3052 @$(MKCONFIG) $(@:_config=) arm ixp actux1 3053 3054actux2_config : unconfig 3055 @$(MKCONFIG) $(@:_config=) arm ixp actux2 3056 3057actux3_config : unconfig 3058 @$(MKCONFIG) $(@:_config=) arm ixp actux3 3059 3060actux4_config : unconfig 3061 @$(MKCONFIG) $(@:_config=) arm ixp actux4 3062 3063cerf250_config : unconfig 3064 @$(MKCONFIG) $(@:_config=) arm pxa cerf250 3065 3066cradle_config : unconfig 3067 @$(MKCONFIG) $(@:_config=) arm pxa cradle 3068 3069csb226_config : unconfig 3070 @$(MKCONFIG) $(@:_config=) arm pxa csb226 3071 3072delta_config : unconfig 3073 @$(MKCONFIG) $(@:_config=) arm pxa delta 3074 3075innokom_config : unconfig 3076 @$(MKCONFIG) $(@:_config=) arm pxa innokom 3077 3078ixdp425_config : unconfig 3079 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3080 3081ixdpg425_config : unconfig 3082 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3083 3084lubbock_config : unconfig 3085 @$(MKCONFIG) $(@:_config=) arm pxa lubbock 3086 3087pleb2_config : unconfig 3088 @$(MKCONFIG) $(@:_config=) arm pxa pleb2 3089 3090logodl_config : unconfig 3091 @$(MKCONFIG) $(@:_config=) arm pxa logodl 3092 3093pdnb3_config \ 3094scpu_config: unconfig 3095 @mkdir -p $(obj)include 3096 @if [ "$(findstring scpu_,$@)" ] ; then \ 3097 echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ 3098 $(XECHO) "... on SCPU board variant" ; \ 3099 fi 3100 @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive 3101 3102pxa255_idp_config: unconfig 3103 @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp 3104 3105polaris_config \ 3106trizepsiv_config : unconfig 3107 @mkdir -p $(obj)include 3108 @if [ "$(findstring polaris,$@)" ] ; then \ 3109 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ 3110 fi; 3111 @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv 3112 3113wepep250_config : unconfig 3114 @$(MKCONFIG) $(@:_config=) arm pxa wepep250 3115 3116xaeniax_config : unconfig 3117 @$(MKCONFIG) $(@:_config=) arm pxa xaeniax 3118 3119xm250_config : unconfig 3120 @$(MKCONFIG) $(@:_config=) arm pxa xm250 3121 3122xsengine_config : unconfig 3123 @$(MKCONFIG) $(@:_config=) arm pxa xsengine 3124 3125zylonite_config : 3126 @$(MKCONFIG) $(@:_config=) arm pxa zylonite 3127 3128######################################################################### 3129## ARM1136 Systems 3130######################################################################### 3131 3132apollon_config : unconfig 3133 @mkdir -p $(obj)include 3134 @mkdir -p $(obj)onenand_ipl/board/apollon 3135 @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h 3136 @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx 3137 @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk 3138 3139imx31_litekit_config : unconfig 3140 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 3141 3142imx31_phycore_eet_config \ 3143imx31_phycore_config : unconfig 3144 @mkdir -p $(obj)include 3145 @if [ -n "$(findstring _eet_,$@)" ]; then \ 3146 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ 3147 fi 3148 @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 3149 3150mx31ads_config : unconfig 3151 @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 3152 3153mx31pdk_config \ 3154mx31pdk_nand_config : unconfig 3155 @mkdir -p $(obj)include 3156 @if [ -n "$(findstring _nand_,$@)" ]; then \ 3157 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ 3158 else \ 3159 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ 3160 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ 3161 fi 3162 @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 3163 3164omap2420h4_config : unconfig 3165 @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx 3166 3167qong_config : unconfig 3168 @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 3169 3170 3171######################################################################### 3172## ARM1176 Systems 3173######################################################################### 3174smdk6400_noUSB_config \ 3175smdk6400_config : unconfig 3176 @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 3177 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 3178 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 3179 @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ 3180 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3181 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3182 else \ 3183 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3184 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3185 fi 3186 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 3187 3188#======================================================================== 3189# i386 3190#======================================================================== 3191######################################################################### 3192## AMD SC520 CDP 3193######################################################################### 3194eNET_config : unconfig 3195 @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 3196 3197sc520_cdp_config : unconfig 3198 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 3199 3200sc520_spunk_config : unconfig 3201 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3202 3203sc520_spunk_rel_config : unconfig 3204 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3205 3206#======================================================================== 3207# MIPS 3208#======================================================================== 3209######################################################################### 3210## MIPS32 4Kc 3211######################################################################### 3212 3213xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 3214 3215incaip_100MHz_config \ 3216incaip_133MHz_config \ 3217incaip_150MHz_config \ 3218incaip_config: unconfig 3219 @mkdir -p $(obj)include 3220 @[ -z "$(findstring _100MHz,$@)" ] || \ 3221 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ 3222 $(XECHO) "... with 100MHz system clock" ; \ 3223 } 3224 @[ -z "$(findstring _133MHz,$@)" ] || \ 3225 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ 3226 $(XECHO) "... with 133MHz system clock" ; \ 3227 } 3228 @[ -z "$(findstring _150MHz,$@)" ] || \ 3229 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ 3230 $(XECHO) "... with 150MHz system clock" ; \ 3231 } 3232 @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip 3233 3234tb0229_config: unconfig 3235 @$(MKCONFIG) $(@:_config=) mips mips tb0229 3236 3237vct_premium_config \ 3238vct_premium_small_config \ 3239vct_premium_onenand_config \ 3240vct_premium_onenand_small_config \ 3241vct_platinum_config \ 3242vct_platinum_small_config \ 3243vct_platinum_onenand_config \ 3244vct_platinum_onenand_small_config \ 3245vct_platinumavc_config \ 3246vct_platinumavc_small_config \ 3247vct_platinumavc_onenand_config \ 3248vct_platinumavc_onenand_small_config: unconfig 3249 @mkdir -p $(obj)include 3250 @if [ "$(findstring _premium,$@)" ] ; then \ 3251 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ 3252 $(XECHO) "... on Premium board variant" ; \ 3253 fi 3254 @if [ "$(findstring _platinum_,$@)" ] ; then \ 3255 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ 3256 $(XECHO) "... on Platinum board variant" ; \ 3257 fi 3258 @if [ "$(findstring _platinumavc,$@)" ] ; then \ 3259 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ 3260 $(XECHO) "... on PlatinumAVC board variant" ; \ 3261 fi 3262 @if [ "$(findstring _onenand,$@)" ] ; then \ 3263 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ 3264 $(XECHO) "... on OneNAND board variant" ; \ 3265 fi 3266 @if [ "$(findstring _small,$@)" ] ; then \ 3267 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ 3268 $(XECHO) "... stripped down image variant" ; \ 3269 fi 3270 @$(MKCONFIG) -a vct mips mips vct micronas 3271 3272######################################################################### 3273## MIPS32 AU1X00 3274######################################################################### 3275 3276dbau1000_config : unconfig 3277 @mkdir -p $(obj)include 3278 @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h 3279 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3280 3281dbau1100_config : unconfig 3282 @mkdir -p $(obj)include 3283 @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h 3284 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3285 3286dbau1500_config : unconfig 3287 @mkdir -p $(obj)include 3288 @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h 3289 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3290 3291dbau1550_config : unconfig 3292 @mkdir -p $(obj)include 3293 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3294 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3295 3296dbau1550_el_config : unconfig 3297 @mkdir -p $(obj)include 3298 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3299 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3300 3301gth2_config : unconfig 3302 @mkdir -p $(obj)include 3303 @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h 3304 @$(MKCONFIG) -a gth2 mips mips gth2 3305 3306pb1000_config : unconfig 3307 @mkdir -p $(obj)include 3308 @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h 3309 @$(MKCONFIG) -a pb1x00 mips mips pb1x00 3310 3311qemu_mips_config : unconfig 3312 @mkdir -p $(obj)include 3313 @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h 3314 @$(MKCONFIG) -a qemu-mips mips mips qemu-mips 3315 3316######################################################################### 3317## MIPS64 5Kc 3318######################################################################### 3319 3320purple_config : unconfig 3321 @$(MKCONFIG) $(@:_config=) mips mips purple 3322 3323#======================================================================== 3324# Nios 3325#======================================================================== 3326######################################################################### 3327## Nios32 3328######################################################################### 3329 3330ADNPESC1_DNPEVA2_base_32_config \ 3331ADNPESC1_base_32_config \ 3332ADNPESC1_config: unconfig 3333 @mkdir -p $(obj)include 3334 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 3335 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ 3336 $(XECHO) "... DNP/EVA2 configuration" ; \ 3337 } 3338 @[ -z "$(findstring _base_32,$@)" ] || \ 3339 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3340 $(XECHO) "... NIOS 'base_32' configuration" ; \ 3341 } 3342 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 3343 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3344 $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ 3345 } 3346 @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv 3347 3348DK1C20_safe_32_config \ 3349DK1C20_standard_32_config \ 3350DK1C20_config: unconfig 3351 @mkdir -p $(obj)include 3352 @[ -z "$(findstring _safe_32,$@)" ] || \ 3353 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3354 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3355 } 3356 @[ -z "$(findstring _standard_32,$@)" ] || \ 3357 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3358 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3359 } 3360 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 3361 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3362 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3363 } 3364 @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera 3365 3366DK1S10_safe_32_config \ 3367DK1S10_standard_32_config \ 3368DK1S10_mtx_ldk_20_config \ 3369DK1S10_config: unconfig 3370 @mkdir -p $(obj)include 3371 @[ -z "$(findstring _safe_32,$@)" ] || \ 3372 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3373 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3374 } 3375 @[ -z "$(findstring _standard_32,$@)" ] || \ 3376 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3377 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3378 } 3379 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 3380 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ 3381 $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ 3382 } 3383 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 3384 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3385 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3386 } 3387 @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera 3388 3389######################################################################### 3390## Nios-II 3391######################################################################### 3392 3393EP1C20_config : unconfig 3394 @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera 3395 3396EP1S10_config : unconfig 3397 @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera 3398 3399EP1S40_config : unconfig 3400 @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera 3401 3402PK1C20_config : unconfig 3403 @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent 3404 3405PCI5441_config : unconfig 3406 @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent 3407 3408#======================================================================== 3409## Microblaze 3410#======================================================================== 3411 3412microblaze-generic_config: unconfig 3413 @mkdir -p $(obj)include 3414 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx 3415 3416suzaku_config: unconfig 3417 @mkdir -p $(obj)include 3418 @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h 3419 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno 3420 3421#======================================================================== 3422# Blackfin 3423#======================================================================== 3424 3425# Analog Devices boards 3426BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ 3427 bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit 3428 3429# Bluetechnix tinyboards 3430BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537 3431 3432# Misc third party boards 3433BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp 3434 3435# I-SYST Micromodule 3436BFIN_BOARDS += ibf-dsp561 3437 3438$(BFIN_BOARDS:%=%_config) : unconfig 3439 @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) 3440 3441$(BFIN_BOARDS): 3442 $(MAKE) $@_config 3443 $(MAKE) 3444 3445#======================================================================== 3446# AVR32 3447#======================================================================== 3448 3449atngw100_config : unconfig 3450 @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x 3451 3452atstk1002_config : unconfig 3453 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3454 3455atstk1003_config : unconfig 3456 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3457 3458atstk1004_config : unconfig 3459 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3460 3461atstk1006_config : unconfig 3462 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3463 3464favr-32-ezkit_config : unconfig 3465 @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x 3466 3467hammerhead_config : unconfig 3468 @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x 3469 3470mimc200_config : unconfig 3471 @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x 3472 3473#======================================================================== 3474# SH3 (SuperH) 3475#======================================================================== 3476 3477######################################################################### 3478## sh2 (Renesas SuperH) 3479######################################################################### 3480rsk7203_config: unconfig 3481 @mkdir -p $(obj)include 3482 @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h 3483 @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas 3484 3485######################################################################### 3486## sh3 (Renesas SuperH) 3487######################################################################### 3488 3489mpr2_config: unconfig 3490 @mkdir -p $(obj)include 3491 @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h 3492 @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 3493 3494ms7720se_config: unconfig 3495 @mkdir -p $(obj)include 3496 @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h 3497 @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se 3498 3499######################################################################### 3500## sh4 (Renesas SuperH) 3501######################################################################### 3502 3503MigoR_config : unconfig 3504 @mkdir -p $(obj)include 3505 @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h 3506 @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas 3507 3508ms7750se_config: unconfig 3509 @mkdir -p $(obj)include 3510 @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h 3511 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se 3512 3513ms7722se_config : unconfig 3514 @mkdir -p $(obj)include 3515 @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h 3516 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se 3517 3518r2dplus_config : unconfig 3519 @mkdir -p $(obj)include 3520 @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h 3521 @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas 3522 3523r7780mp_config: unconfig 3524 @mkdir -p $(obj)include 3525 @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h 3526 @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas 3527 3528sh7763rdp_config : unconfig 3529 @mkdir -p $(obj)include 3530 @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h 3531 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas 3532 3533xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) 3534sh7785lcr_32bit_config \ 3535sh7785lcr_config : unconfig 3536 @mkdir -p $(obj)include 3537 @mkdir -p $(obj)board/renesas/sh7785lcr 3538 @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h 3539 @if [ "$(findstring 32bit, $@)" ] ; then \ 3540 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ 3541 echo "TEXT_BASE = 0x8ff80000" > \ 3542 $(obj)board/renesas/sh7785lcr/config.tmp ; \ 3543 $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ 3544 fi 3545 @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas 3546 3547ap325rxa_config : unconfig 3548 @mkdir -p $(obj)include 3549 @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h 3550 @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas 3551 3552espt_config : unconfig 3553 @mkdir -p $(obj)include 3554 @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h 3555 @$(MKCONFIG) -a $(@:_config=) sh sh4 espt 3556 3557#======================================================================== 3558# SPARC 3559#======================================================================== 3560 3561######################################################################### 3562## LEON3 3563######################################################################### 3564 3565# Gaisler GR-XC3S-1500 board 3566gr_xc3s_1500_config : unconfig 3567 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler 3568 3569# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system 3570gr_cpci_ax2000_config : unconfig 3571 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler 3572 3573# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS 3574# Development board Stratix II edition, FPGA Device EP2S60. 3575gr_ep2s60_config: unconfig 3576 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler 3577 3578# Gaisler LEON3 GRSIM simulator 3579grsim_config : unconfig 3580 @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler 3581 3582######################################################################### 3583## LEON2 3584######################################################################### 3585 3586# Gaisler LEON2 GRSIM simulator 3587grsim_leon2_config : unconfig 3588 @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler 3589 3590######################################################################### 3591######################################################################### 3592######################################################################### 3593 3594clean: 3595 @rm -f $(obj)examples/standalone/82559_eeprom \ 3596 $(obj)examples/standalone/eepro100_eeprom \ 3597 $(obj)examples/standalone/hello_world \ 3598 $(obj)examples/standalone/interrupt \ 3599 $(obj)examples/standalone/mem_to_mem_idma2intr \ 3600 $(obj)examples/standalone/sched \ 3601 $(obj)examples/standalone/smc91111_eeprom \ 3602 $(obj)examples/standalone/test_burst \ 3603 $(obj)examples/standalone/timer 3604 @rm -f $(obj)examples/api/demo{,.bin} 3605 @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ 3606 $(obj)tools/env/{fw_printenv,fw_setenv} \ 3607 $(obj)tools/envcrc \ 3608 $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ 3609 $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ 3610 $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ 3611 $(obj)tools/ncb $(obj)tools/ubsha1 3612 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ 3613 $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ 3614 $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ 3615 $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ 3616 $(obj)lib_blackfin/u-boot.lds \ 3617 $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] 3618 @rm -f $(obj)include/bmp_logo.h 3619 @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} 3620 @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} 3621 @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) 3622 @find $(OBJTREE) -type f \ 3623 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 3624 -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ 3625 | xargs rm -f 3626 3627clobber: clean 3628 @find $(OBJTREE) -type f \( -name .depend \ 3629 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 3630 -print0 \ 3631 | xargs -0 rm -f 3632 @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ 3633 $(obj)cscope.* $(obj)*.*~ 3634 @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) 3635 @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} 3636 @rm -f $(obj)cpu/mpc824x/bedbug_603e.c 3637 @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm 3638 @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f 3639 @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f 3640 3641ifeq ($(OBJTREE),$(SRCTREE)) 3642mrproper \ 3643distclean: clobber unconfig 3644else 3645mrproper \ 3646distclean: clobber unconfig 3647 rm -rf $(obj)* 3648endif 3649 3650backup: 3651 F=`basename $(TOPDIR)` ; cd .. ; \ 3652 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 3653 3654######################################################################### 3655