1# 2# (C) Copyright 2000-2013 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# SPDX-License-Identifier: GPL-2.0+ 6# 7 8VERSION = 2014 9PATCHLEVEL = 01 10SUBLEVEL = 11EXTRAVERSION = 12NAME = 13 14# *DOCUMENTATION* 15# To see a list of typical targets execute "make help" 16# More info can be located in ./README 17# Comments in this file are targeted only to the developer, do not 18# expect to learn how to build the kernel reading this file. 19 20# Do not: 21# o use make's built-in rules and variables 22# (this increases performance and avoids hard-to-debug behaviour); 23# o print "Entering directory ..."; 24MAKEFLAGS += -rR --no-print-directory 25 26# Avoid funny character set dependencies 27unexport LC_ALL 28LC_COLLATE=C 29LC_NUMERIC=C 30export LC_COLLATE LC_NUMERIC 31 32# We are using a recursive build, so we need to do a little thinking 33# to get the ordering right. 34# 35# Most importantly: sub-Makefiles should only ever modify files in 36# their own directory. If in some directory we have a dependency on 37# a file in another dir (which doesn't happen often, but it's often 38# unavoidable when linking the built-in.o targets which finally 39# turn into vmlinux), we will call a sub make in that other dir, and 40# after that we are sure that everything which is in that other dir 41# is now up to date. 42# 43# The only cases where we need to modify files which have global 44# effects are thus separated out and done before the recursive 45# descending is started. They are now explicitly listed as the 46# prepare rule. 47 48# To put more focus on warnings, be less verbose as default 49# Use 'make V=1' to see the full commands 50 51ifeq ("$(origin V)", "command line") 52 KBUILD_VERBOSE = $(V) 53endif 54ifndef KBUILD_VERBOSE 55 KBUILD_VERBOSE = 0 56endif 57 58# Call a source code checker (by default, "sparse") as part of the 59# C compilation. 60# 61# Use 'make C=1' to enable checking of only re-compiled files. 62# Use 'make C=2' to enable checking of *all* source files, regardless 63# of whether they are re-compiled or not. 64# 65# See the file "Documentation/sparse.txt" for more details, including 66# where to get the "sparse" utility. 67 68ifeq ("$(origin C)", "command line") 69 KBUILD_CHECKSRC = $(C) 70endif 71ifndef KBUILD_CHECKSRC 72 KBUILD_CHECKSRC = 0 73endif 74 75# Use make M=dir to specify directory of external module to build 76# Old syntax make ... SUBDIRS=$PWD is still supported 77# Setting the environment variable KBUILD_EXTMOD take precedence 78ifdef SUBDIRS 79 KBUILD_EXTMOD ?= $(SUBDIRS) 80endif 81 82ifeq ("$(origin M)", "command line") 83 KBUILD_EXTMOD := $(M) 84endif 85 86# kbuild supports saving output files in a separate directory. 87# To locate output files in a separate directory two syntaxes are supported. 88# In both cases the working directory must be the root of the kernel src. 89# 1) O= 90# Use "make O=dir/to/store/output/files/" 91# 92# 2) Set KBUILD_OUTPUT 93# Set the environment variable KBUILD_OUTPUT to point to the directory 94# where the output files shall be placed. 95# export KBUILD_OUTPUT=dir/to/store/output/files/ 96# make 97# 98# The O= assignment takes precedence over the KBUILD_OUTPUT environment 99# variable. 100 101 102# KBUILD_SRC is set on invocation of make in OBJ directory 103# KBUILD_SRC is not intended to be used by the regular user (for now) 104ifeq ($(KBUILD_SRC),) 105 106# OK, Make called in directory where kernel src resides 107# Do we want to locate output files in a separate directory? 108ifeq ("$(origin O)", "command line") 109 KBUILD_OUTPUT := $(O) 110endif 111 112ifeq ("$(origin W)", "command line") 113 export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W) 114endif 115 116# That's our default target when none is given on the command line 117PHONY := _all 118_all: 119 120# Cancel implicit rules on top Makefile 121$(CURDIR)/Makefile Makefile: ; 122 123ifneq ($(KBUILD_OUTPUT),) 124# Invoke a second make in the output directory, passing relevant variables 125# check that the output directory actually exists 126saved-output := $(KBUILD_OUTPUT) 127KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) 128$(if $(KBUILD_OUTPUT),, \ 129 $(error output directory "$(saved-output)" does not exist)) 130 131PHONY += $(MAKECMDGOALS) sub-make 132 133$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make 134 @: 135 136sub-make: FORCE 137 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ 138 KBUILD_SRC=$(CURDIR) \ 139 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ 140 $(filter-out _all sub-make,$(MAKECMDGOALS)) 141 142# Leave processing to above invocation of make 143skip-makefile := 1 144endif # ifneq ($(KBUILD_OUTPUT),) 145endif # ifeq ($(KBUILD_SRC),) 146 147# We process the rest of the Makefile if this is the final invocation of make 148ifeq ($(skip-makefile),) 149 150# If building an external module we do not care about the all: rule 151# but instead _all depend on modules 152PHONY += all 153ifeq ($(KBUILD_EXTMOD),) 154_all: all 155else 156_all: modules 157endif 158 159srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) 160objtree := $(CURDIR) 161src := $(srctree) 162obj := $(objtree) 163 164VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 165 166export srctree objtree VPATH 167 168OBJTREE := $(objtree) 169SPLTREE := $(OBJTREE)/spl 170TPLTREE := $(OBJTREE)/tpl 171SRCTREE := $(srctree) 172TOPDIR := $(SRCTREE) 173export TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE 174 175MKCONFIG := $(SRCTREE)/mkconfig 176export MKCONFIG 177 178# Make sure CDPATH settings don't interfere 179unexport CDPATH 180 181######################################################################### 182 183TIMESTAMP_FILE = include/generated/timestamp_autogenerated.h 184VERSION_FILE = include/generated/version_autogenerated.h 185 186HOSTARCH := $(shell uname -m | \ 187 sed -e s/i.86/x86/ \ 188 -e s/sun4u/sparc64/ \ 189 -e s/arm.*/arm/ \ 190 -e s/sa110/arm/ \ 191 -e s/ppc64/powerpc/ \ 192 -e s/ppc/powerpc/ \ 193 -e s/macppc/powerpc/\ 194 -e s/sh.*/sh/) 195 196HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 197 sed -e 's/\(cygwin\).*/cygwin/') 198 199export HOSTARCH HOSTOS 200 201# Deal with colliding definitions from tcsh etc. 202VENDOR= 203 204######################################################################### 205 206# set default to nothing for native builds 207ifeq ($(HOSTARCH),$(ARCH)) 208CROSS_COMPILE ?= 209endif 210 211# SHELL used by kbuild 212CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 213 else if [ -x /bin/bash ]; then echo /bin/bash; \ 214 else echo sh; fi ; fi) 215 216HOSTCC = gcc 217HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer 218 219ifeq ($(HOSTOS),cygwin) 220HOSTCFLAGS += -ansi 221endif 222 223# Mac OS X / Darwin's C preprocessor is Apple specific. It 224# generates numerous errors and warnings. We want to bypass it 225# and use GNU C's cpp. To do this we pass the -traditional-cpp 226# option to the compiler. Note that the -traditional-cpp flag 227# DOES NOT have the same semantics as GNU C's flag, all it does 228# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. 229# 230# Apple's linker is similar, thanks to the new 2 stage linking 231# multiple symbol definitions are treated as errors, hence the 232# -multiply_defined suppress option to turn off this error. 233# 234ifeq ($(HOSTOS),darwin) 235# get major and minor product version (e.g. '10' and '6' for Snow Leopard) 236DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') 237DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') 238 239os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ 240 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) 241 242# Snow Leopards build environment has no longer restrictions as described above 243HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") 244HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") 245HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") 246endif 247 248# Decide whether to build built-in, modular, or both. 249# Normally, just do built-in. 250 251KBUILD_MODULES := 252KBUILD_BUILTIN := 1 253 254# If we have only "make modules", don't compile built-in objects. 255# When we're building modules with modversions, we need to consider 256# the built-in objects during the descend as well, in order to 257# make sure the checksums are up to date before we record them. 258 259ifeq ($(MAKECMDGOALS),modules) 260 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 261endif 262 263# If we have "make <whatever> modules", compile modules 264# in addition to whatever we do anyway. 265# Just "make" or "make all" shall build modules as well 266 267# U-Boot does not need modules 268#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 269# KBUILD_MODULES := 1 270#endif 271 272#ifeq ($(MAKECMDGOALS),) 273# KBUILD_MODULES := 1 274#endif 275 276export KBUILD_MODULES KBUILD_BUILTIN 277export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 278 279# Beautify output 280# --------------------------------------------------------------------------- 281# 282# Normally, we echo the whole command before executing it. By making 283# that echo $($(quiet)$(cmd)), we now have the possibility to set 284# $(quiet) to choose other forms of output instead, e.g. 285# 286# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 287# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 288# 289# If $(quiet) is empty, the whole command will be printed. 290# If it is set to "quiet_", only the short version will be printed. 291# If it is set to "silent_", nothing will be printed at all, since 292# the variable $(silent_cmd_cc_o_c) doesn't exist. 293# 294# A simple variant is to prefix commands with $(Q) - that's useful 295# for commands that shall be hidden in non-verbose mode. 296# 297# $(Q)ln $@ :< 298# 299# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 300# If KBUILD_VERBOSE equals 1 then the above command is displayed. 301 302ifeq ($(KBUILD_VERBOSE),1) 303 quiet = 304 Q = 305else 306 quiet=quiet_ 307 Q = @ 308endif 309 310# If the user is running make -s (silent mode), suppress echoing of 311# commands 312 313ifneq ($(filter s% -s%,$(MAKEFLAGS)),) 314 quiet=silent_ 315endif 316 317export quiet Q KBUILD_VERBOSE 318 319 320# Look for make include files relative to root of kernel src 321MAKEFLAGS += --include-dir=$(srctree) 322 323# We need some generic definitions (do not try to remake the file). 324$(srctree)/scripts/Kbuild.include: ; 325include $(srctree)/scripts/Kbuild.include 326 327# Make variables (CC, etc...) 328 329AS = $(CROSS_COMPILE)as 330# Always use GNU ld 331ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) 332LD = $(CROSS_COMPILE)ld.bfd 333else 334LD = $(CROSS_COMPILE)ld 335endif 336CC = $(CROSS_COMPILE)gcc 337CPP = $(CC) -E 338AR = $(CROSS_COMPILE)ar 339NM = $(CROSS_COMPILE)nm 340LDR = $(CROSS_COMPILE)ldr 341STRIP = $(CROSS_COMPILE)strip 342OBJCOPY = $(CROSS_COMPILE)objcopy 343OBJDUMP = $(CROSS_COMPILE)objdump 344AWK = awk 345RANLIB = $(CROSS_COMPILE)RANLIB 346DTC = dtc 347CHECK = sparse 348 349CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 350 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) 351 352KBUILD_CPPFLAGS := -D__KERNEL__ 353 354KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ 355 -Wno-format-security \ 356 -fno-builtin -ffreestanding 357KBUILD_AFLAGS := -D__ASSEMBLY__ 358 359U_BOOT_VERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 360 361export VERSION PATCHLEVEL SUBLEVEL U_BOOT_VERSION 362export ARCH CPU BOARD VENDOR SOC 363export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC 364export CPP AR NM LDR STRIP OBJCOPY OBJDUMP 365export MAKE AWK 366export DTC CHECK CHECKFLAGS 367 368export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE 369export KBUILD_CFLAGS KBUILD_AFLAGS 370 371# When compiling out-of-tree modules, put MODVERDIR in the module 372# tree rather than in the kernel tree. The kernel tree might 373# even be read-only. 374export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 375 376# Files to ignore in find ... statements 377 378RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \ 379 -o -name .pc -o -name .hg -o -name .git \) -prune -o 380export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 381 --exclude CVS --exclude .pc --exclude .hg --exclude .git 382 383# =========================================================================== 384# Rules shared between *config targets and build targets 385 386# Basic helpers built in scripts/ 387PHONY += scripts_basic 388scripts_basic: 389 $(Q)$(MAKE) $(build)=scripts/basic 390 $(Q)rm -f .tmp_quiet_recordmcount 391 392# To avoid any implicit rule to kick in, define an empty command. 393scripts/basic/%: scripts_basic ; 394 395# To make sure we do not include .config for any of the *config targets 396# catch them early, and hand them over to scripts/kconfig/Makefile 397# It is allowed to specify more targets when calling make, including 398# mixing *config targets and build targets. 399# For example 'make oldconfig all'. 400# Detect when mixed targets is specified, and make a second invocation 401# of make so .config is not included in this case either (for *config). 402 403no-dot-config-targets := clean clobber mrproper distclean \ 404 cscope TAGS %tags help %docs check% coccicheck \ 405 backup 406 407config-targets := 0 408mixed-targets := 0 409dot-config := 1 410 411ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 412 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 413 dot-config := 0 414 endif 415endif 416 417ifeq ($(KBUILD_EXTMOD),) 418 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 419 config-targets := 1 420 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) 421 mixed-targets := 1 422 endif 423 endif 424endif 425 426ifeq ($(mixed-targets),1) 427# =========================================================================== 428# We're called with mixed targets (*config and build targets). 429# Handle them one by one. 430 431%:: FORCE 432 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ 433 434else 435ifeq ($(config-targets),1) 436# =========================================================================== 437# *config targets only - make sure prerequisites are updated, and descend 438# in scripts/kconfig to make the *config target 439 440# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. 441# KBUILD_DEFCONFIG may point out an alternative default configuration 442# used for 'make defconfig' 443 444%_config:: 445 @$(MKCONFIG) -A $(@:_config=) 446 447else 448# =========================================================================== 449# Build targets only - this includes vmlinux, arch specific targets, clean 450# targets and others. In general all targets except *config targets. 451 452# load ARCH, BOARD, and CPU configuration 453-include include/config.mk 454 455ifeq ($(dot-config),1) 456# Read in config 457-include include/autoconf.mk 458-include include/autoconf.mk.dep 459 460# load other configuration 461include $(srctree)/config.mk 462 463ifeq ($(wildcard include/config.mk),) 464$(error "System not configured - see README") 465endif 466 467ifeq ($(__HAVE_ARCH_GENERIC_BOARD),) 468ifneq ($(CONFIG_SYS_GENERIC_BOARD),) 469$(error Your architecture does not support generic board. \ 470Please undefined CONFIG_SYS_GENERIC_BOARD in your board config file) 471endif 472endif 473 474# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use 475# that (or fail if absent). Otherwise, search for a linker script in a 476# standard location. 477 478LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT)) 479 480ifndef LDSCRIPT 481 #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug 482 ifdef CONFIG_SYS_LDSCRIPT 483 # need to strip off double quotes 484 LDSCRIPT := $(CONFIG_SYS_LDSCRIPT:"%"=%) 485 endif 486endif 487 488# If there is no specified link script, we look in a number of places for it 489ifndef LDSCRIPT 490 ifeq ($(CONFIG_NAND_U_BOOT),y) 491 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds 492 ifeq ($(wildcard $(LDSCRIPT)),) 493 LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds 494 endif 495 endif 496 ifeq ($(wildcard $(LDSCRIPT)),) 497 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds 498 endif 499 ifeq ($(wildcard $(LDSCRIPT)),) 500 LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds 501 endif 502 ifeq ($(wildcard $(LDSCRIPT)),) 503 LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds 504 # We don't expect a Makefile here 505 LDSCRIPT_MAKEFILE_DIR = 506 endif 507 ifeq ($(wildcard $(LDSCRIPT)),) 508$(error could not find linker script) 509 endif 510endif 511 512else 513 514 515endif # $(dot-config) 516 517KBUILD_CFLAGS += -Os #-fomit-frame-pointer 518 519ifdef BUILD_TAG 520KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' 521endif 522 523KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) 524 525KBUILD_CFLAGS += -g 526# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> 527# option to the assembler. 528KBUILD_AFLAGS += -g 529 530# Report stack usage if supported 531KBUILD_CFLAGS += $(call cc-option,-fstack-usage) 532 533KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) 534 535# turn jbsr into jsr for m68k 536ifeq ($(ARCH),m68k) 537ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) 538KBUILD_AFLAGS += -Wa,-gstabs,-S 539endif 540endif 541 542ifneq ($(CONFIG_SYS_TEXT_BASE),) 543KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) 544endif 545 546export CONFIG_SYS_TEXT_BASE 547 548# Use UBOOTINCLUDE when you must reference the include/ directory. 549# Needed to be compatible with the O= option 550UBOOTINCLUDE := 551ifneq ($(OBJTREE),$(SRCTREE)) 552UBOOTINCLUDE += -I$(OBJTREE)/include 553endif 554UBOOTINCLUDE += -I$(srctree)/include \ 555 -I$(srctree)/arch/$(ARCH)/include 556 557NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 558CHECKFLAGS += $(NOSTDINC_FLAGS) 559 560# FIX ME 561cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS) 562c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 563 564# The "tools" are needed early, so put this first 565# Don't include stuff already done in $(LIBS) 566# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC 567# is "yes"), so compile examples after U-Boot is compiled. 568SUBDIR_TOOLS = tools 569SUBDIRS = $(SUBDIR_TOOLS) 570 571.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE) 572 573SUBDIR_EXAMPLES-y := examples 574SUBDIRS += $(SUBDIR_EXAMPLES-y) 575 576######################################################################### 577# U-Boot objects....order is important (i.e. start must be first) 578 579head-y := $(CPUDIR)/start.o 580head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o 581head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o 582 583OBJS := $(head-y) 584 585HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 586 587LIBS-y += lib/ 588LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 589LIBS-y += $(CPUDIR)/ 590ifdef SOC 591LIBS-y += $(CPUDIR)/$(SOC)/ 592endif 593LIBS-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/ 594LIBS-$(CONFIG_OF_EMBED) += dts/ 595LIBS-y += arch/$(ARCH)/lib/ 596LIBS-y += fs/ 597LIBS-y += net/ 598LIBS-y += disk/ 599LIBS-y += drivers/ 600LIBS-y += drivers/dma/ 601LIBS-y += drivers/gpio/ 602LIBS-y += drivers/i2c/ 603LIBS-y += drivers/input/ 604LIBS-y += drivers/mmc/ 605LIBS-y += drivers/mtd/ 606LIBS-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ 607LIBS-y += drivers/mtd/onenand/ 608LIBS-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ 609LIBS-y += drivers/mtd/spi/ 610LIBS-y += drivers/net/ 611LIBS-y += drivers/net/phy/ 612LIBS-y += drivers/pci/ 613LIBS-y += drivers/power/ \ 614 drivers/power/fuel_gauge/ \ 615 drivers/power/mfd/ \ 616 drivers/power/pmic/ \ 617 drivers/power/battery/ 618LIBS-y += drivers/spi/ 619LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/ 620LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ 621LIBS-y += drivers/serial/ 622LIBS-y += drivers/usb/eth/ 623LIBS-y += drivers/usb/gadget/ 624LIBS-y += drivers/usb/host/ 625LIBS-y += drivers/usb/musb/ 626LIBS-y += drivers/usb/musb-new/ 627LIBS-y += drivers/usb/phy/ 628LIBS-y += drivers/usb/ulpi/ 629LIBS-y += common/ 630LIBS-y += lib/libfdt/ 631LIBS-$(CONFIG_API) += api/ 632LIBS-$(CONFIG_HAS_POST) += post/ 633LIBS-y += test/ 634 635ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) 636LIBS-y += arch/$(ARCH)/imx-common/ 637endif 638 639LIBS-$(CONFIG_ARM) += arch/arm/cpu/ 640LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/ 641 642LIBS-y += board/$(BOARDDIR)/ 643 644LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y)) 645LIBS := $(sort $(LIBS-y)) 646.PHONY : $(LIBS) 647 648# Add GCC lib 649ifdef USE_PRIVATE_LIBGCC 650ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") 651PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/lib.a 652else 653PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc 654endif 655else 656PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc 657endif 658PLATFORM_LIBS += $(PLATFORM_LIBGCC) 659export PLATFORM_LIBS 660 661# Special flags for CPP when processing the linker script. 662# Pass the version down so we can handle backwards compatibility 663# on the fly. 664LDPPFLAGS += \ 665 -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ 666 -DCPUDIR=$(CPUDIR) \ 667 $(shell $(LD) --version | \ 668 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 669 670######################################################################### 671######################################################################### 672 673ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) 674BOARD_SIZE_CHECK = \ 675 @actual=`wc -c $@ | awk '{print $$1}'`; \ 676 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ 677 if test $$actual -gt $$limit; then \ 678 echo "$@ exceeds file size limit:" >&2 ; \ 679 echo " limit: $$limit bytes" >&2 ; \ 680 echo " actual: $$actual bytes" >&2 ; \ 681 echo " excess: $$((actual - limit)) bytes" >&2; \ 682 exit 1; \ 683 fi 684else 685BOARD_SIZE_CHECK = 686endif 687 688# Statically apply RELA-style relocations (currently arm64 only) 689ifneq ($(CONFIG_STATIC_RELA),) 690# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base 691DO_STATIC_RELA = \ 692 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ 693 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ 694 tools/relocate-rela $(2) $(3) $$start $$end 695else 696DO_STATIC_RELA = 697endif 698 699# Always append ALL so that arch config.mk's can add custom ones 700ALL-y += u-boot.srec u-boot.bin System.map 701 702ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin 703ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin 704ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl 705ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin 706ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img 707ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin 708ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin 709ifneq ($(CONFIG_SPL_TARGET),) 710ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) 711endif 712ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf 713 714# enable combined SPL/u-boot/dtb rules for tegra 715ifneq ($(CONFIG_TEGRA),) 716ifeq ($(CONFIG_SPL),y) 717ifeq ($(CONFIG_OF_SEPARATE),y) 718ALL-y += u-boot-dtb-tegra.bin 719else 720ALL-y += u-boot-nodtb-tegra.bin 721endif 722endif 723endif 724 725LDFLAGS_u-boot += -T u-boot.lds $(LDFLAGS_FINAL) 726ifneq ($(CONFIG_SYS_TEXT_BASE),) 727LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) 728endif 729 730all: $(ALL-y) $(SUBDIR_EXAMPLES-y) 731 732u-boot.dtb: checkdtc u-boot 733 $(MAKE) $(build)=dts binary 734 mv dts/dt.dtb $@ 735 736u-boot-dtb.bin: u-boot.bin u-boot.dtb 737 cat $^ >$@ 738 739u-boot.hex: u-boot 740 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 741 742u-boot.srec: u-boot 743 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ 744 745u-boot.bin: u-boot 746 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 747 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) 748 $(BOARD_SIZE_CHECK) 749 750u-boot.ldr: u-boot 751 $(CREATE_LDR_ENV) 752 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) 753 $(BOARD_SIZE_CHECK) 754 755u-boot.ldr.hex: u-boot.ldr 756 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 757 758u-boot.ldr.srec: u-boot.ldr 759 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 760 761# 762# U-Boot entry point, needed for booting of full-blown U-Boot 763# from the SPL U-Boot version. 764# 765ifndef CONFIG_SYS_UBOOT_START 766CONFIG_SYS_UBOOT_START := 0 767endif 768 769u-boot.img: u-boot.bin 770 tools/mkimage -A $(ARCH) -T firmware -C none \ 771 -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \ 772 -e $(CONFIG_SYS_UBOOT_START) \ 773 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 774 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 775 -d $< $@ 776 777u-boot.imx: u-boot.bin depend 778 $(MAKE) $(build)=arch/arm/imx-common $(objtree)/u-boot.imx 779 780u-boot.kwb: u-boot.bin 781 tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ 782 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ 783 784u-boot.pbl: u-boot.bin 785 tools/mkimage -n $(CONFIG_SYS_FSL_PBL_RCW) \ 786 -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage \ 787 -d $< $@ 788 789u-boot.sha1: u-boot.bin 790 tools/ubsha1 u-boot.bin 791 792u-boot.dis: u-boot 793 $(OBJDUMP) -d $< > $@ 794 795# $@ is output, $(1) and $(2) are inputs, $(3) is padded intermediate, 796# $(4) is pad-to 797SPL_PAD_APPEND = \ 798 $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(4) -I binary -O binary \ 799 $(1) $(3); \ 800 cat $(3) $(2) > $@; \ 801 rm $(3) 802 803ifdef CONFIG_TPL 804SPL_PAYLOAD := tpl/u-boot-with-tpl.bin 805else 806SPL_PAYLOAD := u-boot.bin 807endif 808 809u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) 810 $(call SPL_PAD_APPEND,$<,$(SPL_PAYLOAD),spl/u-boot-spl-pad.bin,$(CONFIG_SPL_PAD_TO)) 811 812tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin 813 $(call SPL_PAD_APPEND,$<,u-boot.bin,tpl/u-boot-tpl-pad.bin,$(CONFIG_TPL_PAD_TO)) 814 815u-boot-with-spl.imx: spl/u-boot-spl.bin u-boot.bin 816 $(MAKE) $(build)=arch/arm/imx-common \ 817 $(OBJTREE)/u-boot-with-spl.imx 818 819u-boot-with-nand-spl.imx: spl/u-boot-spl.bin u-boot.bin 820 $(MAKE) $(build)=arch/arm/imx-common \ 821 $(OBJTREE)/u-boot-with-nand-spl.imx 822 823u-boot.ubl: u-boot-with-spl.bin 824 tools/mkimage -n $(UBL_CONFIG) -T ublimage \ 825 -e $(CONFIG_SYS_TEXT_BASE) -d $< u-boot.ubl 826 827u-boot.ais: spl/u-boot-spl.bin u-boot.img 828 tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ 829 -T aisimage \ 830 -e $(CONFIG_SPL_TEXT_BASE) \ 831 -d spl/u-boot-spl.bin \ 832 spl/u-boot-spl.ais 833 $(OBJCOPY) ${OBJCFLAGS} -I binary \ 834 --pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \ 835 spl/u-boot-spl.ais spl/u-boot-spl-pad.ais 836 cat spl/u-boot-spl-pad.ais u-boot.img > u-boot.ais 837 838 839u-boot.sb: u-boot.bin spl/u-boot-spl.bin 840 $(MAKE) $(build)=$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb 841 842# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. 843# Both images are created using mkimage (crc etc), so that the ROM 844# bootloader can check its integrity. Padding needs to be done to the 845# SPL image (with mkimage header) and not the binary. Otherwise the resulting image 846# which is loaded/copied by the ROM bootloader to SRAM doesn't fit. 847# The resulting image containing both U-Boot images is called u-boot.spr 848u-boot.spr: u-boot.img spl/u-boot-spl.bin 849 tools/mkimage -A $(ARCH) -T firmware -C none \ 850 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \ 851 -d spl/u-boot-spl.bin $@ 852 $(OBJCOPY) -I binary -O binary \ 853 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff $@ 854 cat u-boot.img >> $@ 855 856ifneq ($(CONFIG_TEGRA),) 857u-boot-nodtb-tegra.bin: spl/u-boot-spl.bin u-boot.bin 858 $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary spl/u-boot-spl spl/u-boot-spl-pad.bin 859 cat spl/u-boot-spl-pad.bin u-boot.bin > $@ 860 rm spl/u-boot-spl-pad.bin 861 862ifeq ($(CONFIG_OF_SEPARATE),y) 863u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin u-boot.dtb 864 cat u-boot-nodtb-tegra.bin u-boot.dtb > $@ 865endif 866endif 867 868u-boot-img.bin: spl/u-boot-spl.bin u-boot.img 869 cat spl/u-boot-spl.bin u-boot.img > $@ 870 871# PPC4xx needs the SPL at the end of the image, since the reset vector 872# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target 873# and need to introduce a new build target with the full blown U-Boot 874# at the start padded up to the start of the SPL image. And then concat 875# the SPL image to the end. 876u-boot-img-spl-at-end.bin: spl/u-boot-spl.bin u-boot.img 877 $(OBJCOPY) -I binary -O binary --pad-to=$(CONFIG_UBOOT_PAD_TO) \ 878 --gap-fill=0xff u-boot.img $@ 879 cat spl/u-boot-spl.bin >> $@ 880 881# Create a new ELF from a raw binary file. This is useful for arm64 882# where static relocation needs to be performed on the raw binary, 883# but certain simulators only accept an ELF file (but don't do the 884# relocation). 885# FIXME refactor dts/Makefile to share target/arch detection 886u-boot.elf: u-boot.bin 887 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \ 888 $< u-boot-elf.o 889 @$(LD) u-boot-elf.o -o $@ \ 890 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \ 891 -Ttext=$(CONFIG_SYS_TEXT_BASE) 892 893ifeq ($(CONFIG_SANDBOX),y) 894GEN_UBOOT = \ 895 $(CC) $(SYMS) -T u-boot.lds \ 896 -Wl,--start-group $(LIBS) -Wl,--end-group \ 897 $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot 898else 899GEN_UBOOT = \ 900 $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ 901 $(OBJS) \ 902 --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ 903 -Map u-boot.map -o u-boot 904endif 905 906u-boot: depend $(SUBDIR_TOOLS) $(OBJS) $(LIBS) u-boot.lds 907 $(GEN_UBOOT) 908ifeq ($(CONFIG_KALLSYMS),y) 909 smap=`$(call SYSTEM_MAP,u-boot) | \ 910 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 911 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ 912 -c $(srctree)/common/system_map.c -o common/system_map.o 913 $(GEN_UBOOT) common/system_map.o 914endif 915 916$(OBJS): 917 @: 918 919$(LIBS): depend $(SUBDIR_TOOLS) scripts_basic 920 $(Q)$(MAKE) $(build)=$(patsubst %/,%,$(dir $@)) 921 922$(SUBDIRS): scripts_basic $(TIMESTAMP_FILE) $(VERSION_FILE) 923 $(Q)$(MAKE) $(build)=$@ 924 925$(SUBDIR_EXAMPLES-y): u-boot 926 927# 928# Auto-generate the autoconf.mk file (which is included by all makefiles) 929# 930# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 931# the dep file is only include in this top level makefile to determine when 932# to regenerate the autoconf.mk file. 933 934quiet_cmd_autoconf_dep = GEN $@ 935 cmd_autoconf_dep = $(CC) -x c -DDO_DEPS_ONLY -M $(c_flags) \ 936 -MQ include/autoconf.mk $(srctree)/include/common.h > $@ || rm $@ 937 938include/autoconf.mk.dep: include/config.h include/common.h 939 $(call cmd,autoconf_dep) 940 941quiet_cmd_autoconf = GEN $@ 942 cmd_autoconf = \ 943 $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && \ 944 sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp > $@; \ 945 rm $@.tmp 946 947include/autoconf.mk: include/config.h 948 $(call cmd,autoconf) 949 950u-boot.lds: $(LDSCRIPT) depend 951 $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@ 952 953nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend scripts_basic 954 $(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all 955 956u-boot-nand.bin: nand_spl u-boot.bin 957 cat nand_spl/u-boot-spl-16k.bin u-boot.bin > u-boot-nand.bin 958 959spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend scripts_basic 960 $(MAKE) obj=spl -f $(srctree)/spl/Makefile all 961 962tpl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend scripts_basic 963 $(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y 964 965# Explicitly make _depend in subdirs containing multiple targets to prevent 966# parallel sub-makes creating .depend files simultaneously. 967depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ 968 include/generated/generic-asm-offsets.h \ 969 include/generated/asm-offsets.h 970 971TAG_SUBDIRS = $(SUBDIRS) 972TAG_SUBDIRS += $(dir $(LIBS)) 973TAG_SUBDIRS += include 974 975FIND := find 976FINDFLAGS := -L 977 978PHONY += checkstack 979 980checkstack: 981 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ 982 $(PERL) $(src)/scripts/checkstack.pl $(ARCH) 983 984tags ctags: 985 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 986 -name '*.[chS]' -print` 987 988etags: 989 etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 990 -name '*.[chS]' -print` 991cscope: 992 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ 993 cscope.files 994 cscope -b -q -k 995 996SYSTEM_MAP = \ 997 $(NM) $1 | \ 998 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 999 LC_ALL=C sort 1000System.map: u-boot 1001 @$(call SYSTEM_MAP,$<) > $@ 1002 1003checkthumb: 1004 @if test $(call cc-version) -lt 0404; then \ 1005 echo -n '*** Your GCC does not produce working '; \ 1006 echo 'binaries in THUMB mode.'; \ 1007 echo '*** Your board is configured for THUMB mode.'; \ 1008 false; \ 1009 fi 1010 1011# GCC 3.x is reported to have problems generating the type of relocation 1012# that U-Boot wants. 1013# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html 1014checkgcc4: 1015 @if test $(call cc-version) -lt 0400; then \ 1016 echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \ 1017 false; \ 1018 fi 1019 1020checkdtc: 1021 @if test $(call dtc-version) -lt 0104; then \ 1022 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ 1023 false; \ 1024 fi 1025 1026quiet_cmd_offsets = GEN $@ 1027 cmd_offsets = $(srctree)/tools/scripts/make-asm-offsets $< $@ 1028 1029include/generated/generic-asm-offsets.h: lib/asm-offsets.s 1030 $(call cmd,offsets) 1031 1032quiet_cmd_asm-offsets.s = CC $@ 1033 cmd_asm-offsets.s = mkdir -p lib; \ 1034 $(CC) -DDO_DEPS_ONLY \ 1035 $(c_flags) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ 1036 -o $@ $< -c -S 1037 1038lib/asm-offsets.s: $(srctree)/lib/asm-offsets.c include/config.h 1039 $(call cmd,asm-offsets.s) 1040 1041include/generated/asm-offsets.h: $(CPUDIR)/$(SOC)/asm-offsets.s 1042 $(call cmd,offsets) 1043 1044quiet_cmd_soc_asm-offsets.s = CC $@ 1045 cmd_soc_asm-offsets.s = mkdir -p $(CPUDIR)/$(SOC); \ 1046 if [ -f $(srctree)/$(CPUDIR)/$(SOC)/asm-offsets.c ];then \ 1047 $(CC) -DDO_DEPS_ONLY \ 1048 $(c_flags) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ 1049 -o $@ $(srctree)/$(CPUDIR)/$(SOC)/asm-offsets.c -c -S; \ 1050 else \ 1051 touch $@; \ 1052 fi 1053 1054$(CPUDIR)/$(SOC)/asm-offsets.s: include/config.h 1055 $(call cmd,soc_asm-offsets.s) 1056 1057######################################################################### 1058 1059# ARM relocations should all be R_ARM_RELATIVE (32-bit) or 1060# R_AARCH64_RELATIVE (64-bit). 1061checkarmreloc: u-boot 1062 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ 1063 grep R_A | sort -u`"; \ 1064 if test "$$RELOC" != "R_ARM_RELATIVE" -a \ 1065 "$$RELOC" != "R_AARCH64_RELATIVE"; then \ 1066 echo "$< contains unexpected relocations: $$RELOC"; \ 1067 false; \ 1068 fi 1069 1070$(VERSION_FILE): 1071 @mkdir -p $(dir $(VERSION_FILE)) 1072 @( localvers='$(shell $(TOPDIR)/scripts/setlocalversion $(TOPDIR))' ; \ 1073 printf '#define PLAIN_VERSION "%s%s"\n' \ 1074 "$(U_BOOT_VERSION)" "$${localvers}" ; \ 1075 printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' \ 1076 "$(U_BOOT_VERSION)" "$${localvers}" ; \ 1077 ) > $@.tmp 1078 @( printf '#define CC_VERSION_STRING "%s"\n' \ 1079 '$(shell $(CC) --version | head -n 1)' )>> $@.tmp 1080 @( printf '#define LD_VERSION_STRING "%s"\n' \ 1081 '$(shell $(LD) -v | head -n 1)' )>> $@.tmp 1082 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 1083 1084$(TIMESTAMP_FILE): 1085 @mkdir -p $(dir $(TIMESTAMP_FILE)) 1086 @LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@.tmp 1087 @LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@.tmp 1088 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 1089 1090easylogo env gdb: 1091 $(Q)$(MAKE) $(build)=tools/$@ MTD_VERSION=${MTD_VERSION} 1092 1093gdbtools: gdb 1094 1095xmldocs pdfdocs psdocs htmldocs mandocs: tools/kernel-doc/docproc 1096 $(Q)$(MAKE) U_BOOT_VERSION=$(U_BOOT_VERSION) $(build)=doc/DocBook $@ 1097 1098tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE) 1099 $(Q)$(MAKE) $(build)=tools HOST_TOOLS_ALL=y 1100 1101.PHONY : CHANGELOG 1102CHANGELOG: 1103 git log --no-merges U-Boot-1_1_5.. | \ 1104 unexpand -a | sed -e 's/\s\s*$$//' > $@ 1105 1106include/license.h: tools/bin2header COPYING 1107 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 1108######################################################################### 1109 1110 1111######################################################################### 1112 1113clean: 1114 @rm -f examples/standalone/atmel_df_pow2 \ 1115 examples/standalone/hello_world \ 1116 examples/standalone/interrupt \ 1117 examples/standalone/mem_to_mem_idma2intr \ 1118 examples/standalone/sched \ 1119 $(addprefix examples/standalone/, smc91111_eeprom smc911x_eeprom) \ 1120 examples/standalone/test_burst \ 1121 examples/standalone/timer 1122 @rm -f $(addprefix examples/api/, demo demo.bin) 1123 @rm -f tools/bmp_logo tools/easylogo/easylogo \ 1124 tools/env/fw_printenv \ 1125 tools/envcrc \ 1126 $(addprefix tools/gdb/, gdbcont gdbsend) \ 1127 tools/gen_eth_addr tools/img2srec \ 1128 tools/dumpimage \ 1129 $(addprefix tools/, mkenvimage mkimage) \ 1130 tools/mpc86x_clk \ 1131 $(addprefix tools/, mk$(BOARD)spl mkexynosspl) \ 1132 tools/mxsboot \ 1133 tools/ncb tools/ubsha1 \ 1134 tools/kernel-doc/docproc \ 1135 tools/proftool 1136 @rm -f $(addprefix board/cray/L1/, bootscript.c bootscript.image) \ 1137 board/matrix_vision/*/bootscript.img \ 1138 spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl \ 1139 u-boot.lds \ 1140 $(addprefix arch/blackfin/cpu/, init.lds init.elf) 1141 @rm -f include/bmp_logo.h 1142 @rm -f include/bmp_logo_data.h 1143 @rm -f lib/asm-offsets.s 1144 @rm -f include/generated/asm-offsets.h 1145 @rm -f $(CPUDIR)/$(SOC)/asm-offsets.s 1146 @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) 1147 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile cleandocs 1148 @find $(OBJTREE) -type f \ 1149 \( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \ 1150 -o -name '*.o' -o -name '*.a' -o -name '*.exe' -o -name '*.cmd' \ 1151 -o -name '*.cfgtmp' \) -print \ 1152 | xargs rm -f 1153 1154clobber: clean 1155 @find $(OBJTREE) -type f \( -name '*.srec' \ 1156 -o -name '*.bin' -o -name u-boot.img \) \ 1157 -print0 | xargs -0 rm -f 1158 @rm -f $(OBJS) *.bak ctags etags TAGS \ 1159 cscope.* *.*~ 1160 @rm -f u-boot u-boot.map u-boot.hex $(ALL-y) 1161 @rm -f u-boot.kwb 1162 @rm -f u-boot.pbl 1163 @rm -f u-boot.imx 1164 @rm -f u-boot-with-spl.imx 1165 @rm -f u-boot-with-nand-spl.imx 1166 @rm -f u-boot.ubl 1167 @rm -f u-boot.ais 1168 @rm -f u-boot.dtb 1169 @rm -f u-boot.sb 1170 @rm -f u-boot.spr 1171 @rm -f $(addprefix nand_spl/, u-boot.lds u-boot.lst System.map) 1172 @rm -f $(addprefix nand_spl/, u-boot-nand_spl.lds u-boot-spl u-boot-spl.map) 1173 @rm -f $(addprefix spl/, u-boot-spl u-boot-spl.bin u-boot-spl.map) 1174 @rm -f spl/u-boot-spl.lds 1175 @rm -f $(addprefix tpl/, u-boot-tpl u-boot-tpl.bin u-boot-tpl.map) 1176 @rm -f tpl/u-boot-spl.lds 1177 @rm -f MLO MLO.byteswap 1178 @rm -f SPL 1179 @rm -f tools/xway-swap-bytes 1180 @rm -fr include/asm/proc include/asm/arch include/asm 1181 @rm -fr include/generated 1182 @[ ! -d nand_spl ] || find nand_spl -name "*" -type l -print | xargs rm -f 1183 @rm -f dts/*.tmp 1184 @rm -f $(addprefix spl/, u-boot-spl.ais, u-boot-spl-pad.ais) 1185 1186mrproper: clobber 1187 @rm -f include/config.h include/config.mk \ 1188 board/*/config.tmp board/*/*/config.tmp \ 1189 include/autoconf.mk include/autoconf.mk.dep \ 1190 include/spl-autoconf.mk \ 1191 include/tpl-autoconf.mk 1192 1193distclean: mrproper 1194ifneq ($(OBJTREE),$(SRCTREE)) 1195 rm -rf * 1196endif 1197 1198backup: 1199 F=`basename $(TOPDIR)` ; cd .. ; \ 1200 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 1201 1202######################################################################### 1203 1204endif #ifeq ($(config-targets),1) 1205endif #ifeq ($(mixed-targets),1) 1206 1207endif # skip-makefile 1208 1209PHONY += FORCE 1210FORCE: 1211 1212# Declare the contents of the .PHONY variable as phony. We keep that 1213# information in a variable so we can use it in if_changed and friends. 1214.PHONY: $(PHONY) 1215