xref: /openbmc/u-boot/Makefile (revision c267952c)
1# SPDX-License-Identifier: GPL-2.0+
2
3VERSION = 2018
4PATCHLEVEL = 07
5SUBLEVEL =
6EXTRAVERSION = -rc1
7NAME =
8
9# *DOCUMENTATION*
10# To see a list of typical targets execute "make help"
11# More info can be located in ./README
12# Comments in this file are targeted only to the developer, do not
13# expect to learn how to build the kernel reading this file.
14
15# o Do not use make's built-in rules and variables
16#   (this increases performance and avoids hard-to-debug behaviour);
17# o Look for make include files relative to root of kernel src
18MAKEFLAGS += -rR --include-dir=$(CURDIR)
19
20# Avoid funny character set dependencies
21unexport LC_ALL
22LC_COLLATE=C
23LC_NUMERIC=C
24export LC_COLLATE LC_NUMERIC
25
26# Avoid interference with shell env settings
27unexport GREP_OPTIONS
28
29# We are using a recursive build, so we need to do a little thinking
30# to get the ordering right.
31#
32# Most importantly: sub-Makefiles should only ever modify files in
33# their own directory. If in some directory we have a dependency on
34# a file in another dir (which doesn't happen often, but it's often
35# unavoidable when linking the built-in.o targets which finally
36# turn into vmlinux), we will call a sub make in that other dir, and
37# after that we are sure that everything which is in that other dir
38# is now up to date.
39#
40# The only cases where we need to modify files which have global
41# effects are thus separated out and done before the recursive
42# descending is started. They are now explicitly listed as the
43# prepare rule.
44
45# Beautify output
46# ---------------------------------------------------------------------------
47#
48# Normally, we echo the whole command before executing it. By making
49# that echo $($(quiet)$(cmd)), we now have the possibility to set
50# $(quiet) to choose other forms of output instead, e.g.
51#
52#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
53#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
54#
55# If $(quiet) is empty, the whole command will be printed.
56# If it is set to "quiet_", only the short version will be printed.
57# If it is set to "silent_", nothing will be printed at all, since
58# the variable $(silent_cmd_cc_o_c) doesn't exist.
59#
60# A simple variant is to prefix commands with $(Q) - that's useful
61# for commands that shall be hidden in non-verbose mode.
62#
63#	$(Q)ln $@ :<
64#
65# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
66# If KBUILD_VERBOSE equals 1 then the above command is displayed.
67#
68# To put more focus on warnings, be less verbose as default
69# Use 'make V=1' to see the full commands
70
71ifeq ("$(origin V)", "command line")
72  KBUILD_VERBOSE = $(V)
73endif
74ifndef KBUILD_VERBOSE
75  KBUILD_VERBOSE = 0
76endif
77
78ifeq ($(KBUILD_VERBOSE),1)
79  quiet =
80  Q =
81else
82  quiet=quiet_
83  Q = @
84endif
85
86# If the user is running make -s (silent mode), suppress echoing of
87# commands
88
89ifneq ($(filter 4.%,$(MAKE_VERSION)),)	# make-4
90ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
91  quiet=silent_
92endif
93else					# make-3.8x
94ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
95  quiet=silent_
96endif
97endif
98
99export quiet Q KBUILD_VERBOSE
100
101# kbuild supports saving output files in a separate directory.
102# To locate output files in a separate directory two syntaxes are supported.
103# In both cases the working directory must be the root of the kernel src.
104# 1) O=
105# Use "make O=dir/to/store/output/files/"
106#
107# 2) Set KBUILD_OUTPUT
108# Set the environment variable KBUILD_OUTPUT to point to the directory
109# where the output files shall be placed.
110# export KBUILD_OUTPUT=dir/to/store/output/files/
111# make
112#
113# The O= assignment takes precedence over the KBUILD_OUTPUT environment
114# variable.
115
116# KBUILD_SRC is set on invocation of make in OBJ directory
117# KBUILD_SRC is not intended to be used by the regular user (for now)
118ifeq ($(KBUILD_SRC),)
119
120# OK, Make called in directory where kernel src resides
121# Do we want to locate output files in a separate directory?
122ifeq ("$(origin O)", "command line")
123  KBUILD_OUTPUT := $(O)
124endif
125
126# That's our default target when none is given on the command line
127PHONY := _all
128_all:
129
130# Cancel implicit rules on top Makefile
131$(CURDIR)/Makefile Makefile: ;
132
133ifneq ($(KBUILD_OUTPUT),)
134# Invoke a second make in the output directory, passing relevant variables
135# check that the output directory actually exists
136saved-output := $(KBUILD_OUTPUT)
137KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
138								&& /bin/pwd)
139$(if $(KBUILD_OUTPUT),, \
140     $(error failed to create output directory "$(saved-output)"))
141
142PHONY += $(MAKECMDGOALS) sub-make
143
144$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
145	@:
146
147sub-make: FORCE
148	$(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
149	-f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
150
151# Leave processing to above invocation of make
152skip-makefile := 1
153endif # ifneq ($(KBUILD_OUTPUT),)
154endif # ifeq ($(KBUILD_SRC),)
155
156# We process the rest of the Makefile if this is the final invocation of make
157ifeq ($(skip-makefile),)
158
159# Do not print "Entering directory ...",
160# but we want to display it when entering to the output directory
161# so that IDEs/editors are able to understand relative filenames.
162MAKEFLAGS += --no-print-directory
163
164# Call a source code checker (by default, "sparse") as part of the
165# C compilation.
166#
167# Use 'make C=1' to enable checking of only re-compiled files.
168# Use 'make C=2' to enable checking of *all* source files, regardless
169# of whether they are re-compiled or not.
170#
171# See the file "Documentation/sparse.txt" for more details, including
172# where to get the "sparse" utility.
173
174ifeq ("$(origin C)", "command line")
175  KBUILD_CHECKSRC = $(C)
176endif
177ifndef KBUILD_CHECKSRC
178  KBUILD_CHECKSRC = 0
179endif
180
181# Use make M=dir to specify directory of external module to build
182# Old syntax make ... SUBDIRS=$PWD is still supported
183# Setting the environment variable KBUILD_EXTMOD take precedence
184ifdef SUBDIRS
185  KBUILD_EXTMOD ?= $(SUBDIRS)
186endif
187
188ifeq ("$(origin M)", "command line")
189  KBUILD_EXTMOD := $(M)
190endif
191
192# If building an external module we do not care about the all: rule
193# but instead _all depend on modules
194PHONY += all
195ifeq ($(KBUILD_EXTMOD),)
196_all: all
197else
198_all: modules
199endif
200
201ifeq ($(KBUILD_SRC),)
202        # building in the source tree
203        srctree := .
204else
205        ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
206                # building in a subdirectory of the source tree
207                srctree := ..
208        else
209                srctree := $(KBUILD_SRC)
210        endif
211endif
212objtree		:= .
213src		:= $(srctree)
214obj		:= $(objtree)
215
216VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
217
218export srctree objtree VPATH
219
220# Make sure CDPATH settings don't interfere
221unexport CDPATH
222
223#########################################################################
224
225HOSTARCH := $(shell uname -m | \
226	sed -e s/i.86/x86/ \
227	    -e s/sun4u/sparc64/ \
228	    -e s/arm.*/arm/ \
229	    -e s/sa110/arm/ \
230	    -e s/ppc64/powerpc/ \
231	    -e s/ppc/powerpc/ \
232	    -e s/macppc/powerpc/\
233	    -e s/sh.*/sh/)
234
235HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
236	    sed -e 's/\(cygwin\).*/cygwin/')
237
238export	HOSTARCH HOSTOS
239
240#########################################################################
241
242# set default to nothing for native builds
243ifeq ($(HOSTARCH),$(ARCH))
244CROSS_COMPILE ?=
245endif
246
247KCONFIG_CONFIG	?= .config
248export KCONFIG_CONFIG
249
250# SHELL used by kbuild
251CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
252	  else if [ -x /bin/bash ]; then echo /bin/bash; \
253	  else echo sh; fi ; fi)
254
255HOSTCC       = cc
256HOSTCXX      = c++
257HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
258		$(if $(CONFIG_TOOLS_DEBUG),-g)
259HOSTCXXFLAGS = -O2
260
261# With the move to GCC 6, we have implicitly upgraded our language
262# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
263# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
264# have older compilers as their default, so we make it explicit for
265# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
266ifeq ($(HOSTOS),linux)
267HOSTCFLAGS += --std=gnu11
268endif
269
270ifeq ($(HOSTOS),cygwin)
271HOSTCFLAGS	+= -ansi
272endif
273
274# Mac OS X / Darwin's C preprocessor is Apple specific.  It
275# generates numerous errors and warnings.  We want to bypass it
276# and use GNU C's cpp.	To do this we pass the -traditional-cpp
277# option to the compiler.  Note that the -traditional-cpp flag
278# DOES NOT have the same semantics as GNU C's flag, all it does
279# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
280#
281# Apple's linker is similar, thanks to the new 2 stage linking
282# multiple symbol definitions are treated as errors, hence the
283# -multiply_defined suppress option to turn off this error.
284#
285ifeq ($(HOSTOS),darwin)
286# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
287DARWIN_MAJOR_VERSION	= $(shell sw_vers -productVersion | cut -f 1 -d '.')
288DARWIN_MINOR_VERSION	= $(shell sw_vers -productVersion | cut -f 2 -d '.')
289
290os_x_before	= $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
291	$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
292
293# Snow Leopards build environment has no longer restrictions as described above
294HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
295HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
296HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
297
298# since Lion (10.7) ASLR is on by default, but we use linker generated lists
299# in some host tools which is a problem then ... so disable ASLR for these
300# tools
301HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
302endif
303
304# Decide whether to build built-in, modular, or both.
305# Normally, just do built-in.
306
307KBUILD_MODULES :=
308KBUILD_BUILTIN := 1
309
310# If we have only "make modules", don't compile built-in objects.
311# When we're building modules with modversions, we need to consider
312# the built-in objects during the descend as well, in order to
313# make sure the checksums are up to date before we record them.
314
315ifeq ($(MAKECMDGOALS),modules)
316  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
317endif
318
319# If we have "make <whatever> modules", compile modules
320# in addition to whatever we do anyway.
321# Just "make" or "make all" shall build modules as well
322
323# U-Boot does not need modules
324#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
325#  KBUILD_MODULES := 1
326#endif
327
328#ifeq ($(MAKECMDGOALS),)
329#  KBUILD_MODULES := 1
330#endif
331
332export KBUILD_MODULES KBUILD_BUILTIN
333export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
334
335# We need some generic definitions (do not try to remake the file).
336scripts/Kbuild.include: ;
337include scripts/Kbuild.include
338
339# Make variables (CC, etc...)
340
341AS		= $(CROSS_COMPILE)as
342# Always use GNU ld
343ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
344LD		= $(CROSS_COMPILE)ld.bfd
345else
346LD		= $(CROSS_COMPILE)ld
347endif
348CC		= $(CROSS_COMPILE)gcc
349CPP		= $(CC) -E
350AR		= $(CROSS_COMPILE)ar
351NM		= $(CROSS_COMPILE)nm
352LDR		= $(CROSS_COMPILE)ldr
353STRIP		= $(CROSS_COMPILE)strip
354OBJCOPY		= $(CROSS_COMPILE)objcopy
355OBJDUMP		= $(CROSS_COMPILE)objdump
356LEX		= flex
357YACC		= bison
358AWK		= awk
359PERL		= perl
360PYTHON		?= python
361PYTHON2		= python2
362PYTHON3		= python3
363DTC		?= $(objtree)/scripts/dtc/dtc
364CHECK		= sparse
365
366CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
367		  -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
368
369KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
370
371KBUILD_CFLAGS   := -Wall -Wstrict-prototypes \
372		   -Wno-format-security \
373		   -fno-builtin -ffreestanding
374KBUILD_CFLAGS	+= -fshort-wchar
375KBUILD_AFLAGS   := -D__ASSEMBLY__
376
377# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
378UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
379UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
380
381export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
382export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
383export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
384export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
385export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
386export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
387
388export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
389export KBUILD_CFLAGS KBUILD_AFLAGS
390
391# When compiling out-of-tree modules, put MODVERDIR in the module
392# tree rather than in the kernel tree. The kernel tree might
393# even be read-only.
394export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
395
396# Files to ignore in find ... statements
397
398export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
399			  -name CVS -o -name .pc -o -name .hg -o -name .git \) \
400			  -prune -o
401export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
402			 --exclude CVS --exclude .pc --exclude .hg --exclude .git
403
404# ===========================================================================
405# Rules shared between *config targets and build targets
406
407# Basic helpers built in scripts/
408PHONY += scripts_basic
409scripts_basic:
410	$(Q)$(MAKE) $(build)=scripts/basic
411	$(Q)rm -f .tmp_quiet_recordmcount
412
413# To avoid any implicit rule to kick in, define an empty command.
414scripts/basic/%: scripts_basic ;
415
416PHONY += outputmakefile
417# outputmakefile generates a Makefile in the output directory, if using a
418# separate output directory. This allows convenient use of make in the
419# output directory.
420outputmakefile:
421ifneq ($(KBUILD_SRC),)
422	$(Q)ln -fsn $(srctree) source
423	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
424	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
425endif
426
427# To make sure we do not include .config for any of the *config targets
428# catch them early, and hand them over to scripts/kconfig/Makefile
429# It is allowed to specify more targets when calling make, including
430# mixing *config targets and build targets.
431# For example 'make oldconfig all'.
432# Detect when mixed targets is specified, and make a second invocation
433# of make so .config is not included in this case either (for *config).
434
435version_h := include/generated/version_autogenerated.h
436timestamp_h := include/generated/timestamp_autogenerated.h
437defaultenv_h := include/generated/defaultenv_autogenerated.h
438
439no-dot-config-targets := clean clobber mrproper distclean \
440			 help %docs check% coccicheck \
441			 ubootversion backup tests
442
443config-targets := 0
444mixed-targets  := 0
445dot-config     := 1
446
447ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
448	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
449		dot-config := 0
450	endif
451endif
452
453ifeq ($(KBUILD_EXTMOD),)
454        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
455                config-targets := 1
456                ifneq ($(words $(MAKECMDGOALS)),1)
457                        mixed-targets := 1
458                endif
459        endif
460endif
461
462ifeq ($(mixed-targets),1)
463# ===========================================================================
464# We're called with mixed targets (*config and build targets).
465# Handle them one by one.
466
467PHONY += $(MAKECMDGOALS) __build_one_by_one
468
469$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
470	@:
471
472__build_one_by_one:
473	$(Q)set -e; \
474	for i in $(MAKECMDGOALS); do \
475		$(MAKE) -f $(srctree)/Makefile $$i; \
476	done
477
478else
479ifeq ($(config-targets),1)
480# ===========================================================================
481# *config targets only - make sure prerequisites are updated, and descend
482# in scripts/kconfig to make the *config target
483
484KBUILD_DEFCONFIG := sandbox_defconfig
485export KBUILD_DEFCONFIG KBUILD_KCONFIG
486
487config: scripts_basic outputmakefile FORCE
488	$(Q)$(MAKE) $(build)=scripts/kconfig $@
489
490%config: scripts_basic outputmakefile FORCE
491	$(Q)$(MAKE) $(build)=scripts/kconfig $@
492
493else
494# ===========================================================================
495# Build targets only - this includes vmlinux, arch specific targets, clean
496# targets and others. In general all targets except *config targets.
497
498# Additional helpers built in scripts/
499# Carefully list dependencies so we do not try to build scripts twice
500# in parallel
501PHONY += scripts
502scripts: scripts_basic include/config/auto.conf
503	$(Q)$(MAKE) $(build)=$(@)
504
505ifeq ($(dot-config),1)
506# Read in config
507-include include/config/auto.conf
508
509# Read in dependencies to all Kconfig* files, make sure to run
510# oldconfig if changes are detected.
511-include include/config/auto.conf.cmd
512
513# To avoid any implicit rule to kick in, define an empty command
514$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
515
516# If .config is newer than include/config/auto.conf, someone tinkered
517# with it and forgot to run make oldconfig.
518# if auto.conf.cmd is missing then we are probably in a cleaned tree so
519# we execute the config step to be sure to catch updated Kconfig files
520include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
521	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
522	@# If the following part fails, include/config/auto.conf should be
523	@# deleted so "make silentoldconfig" will be re-run on the next build.
524	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
525		{ rm -f include/config/auto.conf; false; }
526	@# include/config.h has been updated after "make silentoldconfig".
527	@# We need to touch include/config/auto.conf so it gets newer
528	@# than include/config.h.
529	@# Otherwise, 'make silentoldconfig' would be invoked twice.
530	$(Q)touch include/config/auto.conf
531
532u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
533	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
534
535-include include/autoconf.mk
536-include include/autoconf.mk.dep
537
538# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
539# is up-to-date. When we switch to a different board configuration, old CONFIG
540# macros are still remaining in include/config/auto.conf. Without the following
541# gimmick, wrong config.mk would be included leading nasty warnings/errors.
542ifneq ($(wildcard $(KCONFIG_CONFIG)),)
543ifneq ($(wildcard include/config/auto.conf),)
544autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
545						include/config/auto.conf)
546ifeq ($(autoconf_is_old),)
547include config.mk
548include arch/$(ARCH)/Makefile
549endif
550endif
551endif
552
553# These are set by the arch-specific config.mk. Make sure they are exported
554# so they can be used when building an EFI application.
555export EFI_LDS		# Filename of EFI link script in arch/$(ARCH)/lib
556export EFI_CRT0		# Filename of EFI CRT0 in arch/$(ARCH)/lib
557export EFI_RELOC	# Filename of EFU relocation code in arch/$(ARCH)/lib
558export CFLAGS_EFI	# Compiler flags to add when building EFI app
559export CFLAGS_NON_EFI	# Compiler flags to remove when building EFI app
560export EFI_TARGET	# binutils target if EFI is natively supported
561
562# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
563# that (or fail if absent).  Otherwise, search for a linker script in a
564# standard location.
565
566ifndef LDSCRIPT
567	#LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
568	ifdef CONFIG_SYS_LDSCRIPT
569		# need to strip off double quotes
570		LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
571	endif
572endif
573
574# If there is no specified link script, we look in a number of places for it
575ifndef LDSCRIPT
576	ifeq ($(wildcard $(LDSCRIPT)),)
577		LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
578	endif
579	ifeq ($(wildcard $(LDSCRIPT)),)
580		LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
581	endif
582	ifeq ($(wildcard $(LDSCRIPT)),)
583		LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
584	endif
585endif
586
587else
588# Dummy target needed, because used as prerequisite
589include/config/auto.conf: ;
590endif # $(dot-config)
591
592#
593# Xtensa linker script cannot be preprocessed with -ansi because of
594# preprocessor operations on strings that don't make C identifiers.
595#
596ifeq ($(CONFIG_XTENSA),)
597LDPPFLAGS	+= -ansi
598endif
599
600ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
601KBUILD_CFLAGS	+= -Os
602else
603KBUILD_CFLAGS	+= -O2
604endif
605
606KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
607KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
608
609# change __FILE__ to the relative path from the srctree
610KBUILD_CFLAGS	+= $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
611
612KBUILD_CFLAGS	+= -g
613# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
614# option to the assembler.
615KBUILD_AFLAGS	+= -g
616
617# Report stack usage if supported
618# ARC tools based on GCC 7.1 has an issue with stack usage
619# with naked functions, see commit message for more details
620ifndef CONFIG_ARC
621ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
622	KBUILD_CFLAGS += -fstack-usage
623endif
624endif
625
626KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
627ifeq ($(cc-name),clang)
628KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
629KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
630KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
631KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
632KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
633endif
634
635# turn jbsr into jsr for m68k
636ifeq ($(ARCH),m68k)
637ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
638KBUILD_AFLAGS += -Wa,-gstabs,-S
639endif
640endif
641
642# Prohibit date/time macros, which would make the build non-deterministic
643KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
644
645include scripts/Makefile.extrawarn
646
647# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
648KBUILD_CPPFLAGS += $(KCPPFLAGS)
649KBUILD_AFLAGS += $(KAFLAGS)
650KBUILD_CFLAGS += $(KCFLAGS)
651
652# Use UBOOTINCLUDE when you must reference the include/ directory.
653# Needed to be compatible with the O= option
654UBOOTINCLUDE    := \
655		-Iinclude \
656		$(if $(KBUILD_SRC), -I$(srctree)/include) \
657		$(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
658			$(if $(CONFIG_HAS_THUMB2),, \
659				-I$(srctree)/arch/$(ARCH)/thumb1/include),) \
660		-I$(srctree)/arch/$(ARCH)/include \
661		-include $(srctree)/include/linux/kconfig.h
662
663NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
664CHECKFLAGS     += $(NOSTDINC_FLAGS)
665
666# FIX ME
667cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
668							$(NOSTDINC_FLAGS)
669c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
670
671#########################################################################
672# U-Boot objects....order is important (i.e. start must be first)
673
674HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
675
676libs-y += lib/
677libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
678libs-$(CONFIG_OF_EMBED) += dts/
679libs-y += fs/
680libs-y += net/
681libs-y += disk/
682libs-y += drivers/
683libs-y += drivers/dma/
684libs-y += drivers/gpio/
685libs-y += drivers/i2c/
686libs-y += drivers/mtd/
687libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
688libs-y += drivers/mtd/onenand/
689libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
690libs-y += drivers/mtd/spi/
691libs-y += drivers/net/
692libs-y += drivers/net/phy/
693libs-y += drivers/pci/
694libs-y += drivers/power/ \
695	drivers/power/domain/ \
696	drivers/power/fuel_gauge/ \
697	drivers/power/mfd/ \
698	drivers/power/pmic/ \
699	drivers/power/battery/ \
700	drivers/power/regulator/
701libs-y += drivers/spi/
702libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
703libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
704libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
705libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
706libs-y += drivers/serial/
707libs-y += drivers/usb/dwc3/
708libs-y += drivers/usb/common/
709libs-y += drivers/usb/emul/
710libs-y += drivers/usb/eth/
711libs-y += drivers/usb/gadget/
712libs-y += drivers/usb/gadget/udc/
713libs-y += drivers/usb/host/
714libs-y += drivers/usb/musb/
715libs-y += drivers/usb/musb-new/
716libs-y += drivers/usb/phy/
717libs-y += drivers/usb/ulpi/
718libs-y += cmd/
719libs-y += common/
720libs-y += env/
721libs-$(CONFIG_API) += api/
722libs-$(CONFIG_HAS_POST) += post/
723libs-y += test/
724libs-y += test/dm/
725libs-$(CONFIG_UT_ENV) += test/env/
726libs-$(CONFIG_UT_OVERLAY) += test/overlay/
727
728libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
729
730libs-y := $(sort $(libs-y))
731
732u-boot-dirs	:= $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
733
734u-boot-alldirs	:= $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
735
736libs-y		:= $(patsubst %/, %/built-in.o, $(libs-y))
737
738u-boot-init := $(head-y)
739u-boot-main := $(libs-y)
740
741
742# Add GCC lib
743ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
744PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
745else
746PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
747endif
748PLATFORM_LIBS += $(PLATFORM_LIBGCC)
749
750ifdef CONFIG_CC_COVERAGE
751KBUILD_CFLAGS += --coverage
752PLATFORM_LIBGCC += -lgcov
753endif
754
755export PLATFORM_LIBS
756export PLATFORM_LIBGCC
757
758# Special flags for CPP when processing the linker script.
759# Pass the version down so we can handle backwards compatibility
760# on the fly.
761LDPPFLAGS += \
762	-include $(srctree)/include/u-boot/u-boot.lds.h \
763	-DCPUDIR=$(CPUDIR) \
764	$(shell $(LD) --version | \
765	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
766
767#########################################################################
768#########################################################################
769
770ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
771BOARD_SIZE_CHECK = \
772	@actual=`wc -c $@ | awk '{print $$1}'`; \
773	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
774	if test $$actual -gt $$limit; then \
775		echo "$@ exceeds file size limit:" >&2 ; \
776		echo "  limit:  $$limit bytes" >&2 ; \
777		echo "  actual: $$actual bytes" >&2 ; \
778		echo "  excess: $$((actual - limit)) bytes" >&2; \
779		exit 1; \
780	fi
781else
782BOARD_SIZE_CHECK =
783endif
784
785# Statically apply RELA-style relocations (currently arm64 only)
786# This is useful for arm64 where static relocation needs to be performed on
787# the raw binary, but certain simulators only accept an ELF file (but don't
788# do the relocation).
789ifneq ($(CONFIG_STATIC_RELA),)
790# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
791DO_STATIC_RELA = \
792	start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
793	end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
794	tools/relocate-rela $(2) $(3) $$start $$end
795else
796DO_STATIC_RELA =
797endif
798
799# Always append ALL so that arch config.mk's can add custom ones
800ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
801
802ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
803ifeq ($(CONFIG_SPL_FSL_PBL),y)
804ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
805else
806ifneq ($(CONFIG_SECURE_BOOT), y)
807# For Secure Boot The Image needs to be signed and Header must also
808# be included. So The image has to be built explicitly
809ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
810endif
811endif
812ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
813ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
814ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
815else
816ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
817ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
818else
819ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
820endif
821endif
822ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
823ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
824ifeq ($(CONFIG_SPL_FRAMEWORK),y)
825ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
826endif
827ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
828ifneq ($(CONFIG_SPL_TARGET),)
829ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
830endif
831ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
832ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
833ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
834
835ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
836ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
837endif
838
839# Build a combined spl + u-boot image for sunxi
840ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
841ALL-y += u-boot-sunxi-with-spl.bin
842endif
843
844# enable combined SPL/u-boot/dtb rules for tegra
845ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
846ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
847ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
848endif
849
850# Add optional build target if defined in board/cpu/soc headers
851ifneq ($(CONFIG_BUILD_TARGET),)
852ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
853endif
854
855ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
856ALL-y += init_sp_bss_offset_check
857endif
858
859LDFLAGS_u-boot += $(LDFLAGS_FINAL)
860
861# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
862LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
863
864ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
865LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
866endif
867
868# Normally we fill empty space with 0xff
869quiet_cmd_objcopy = OBJCOPY $@
870cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
871	$(OBJCOPYFLAGS_$(@F)) $< $@
872
873# Provide a version which does not do this, for use by EFI
874quiet_cmd_zobjcopy = OBJCOPY $@
875cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
876
877quiet_cmd_efipayload = OBJCOPY $@
878cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
879
880MKIMAGEOUTPUT ?= /dev/null
881
882quiet_cmd_mkimage = MKIMAGE $@
883cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
884	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
885
886quiet_cmd_mkfitimage = MKIMAGE $@
887cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
888	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
889
890quiet_cmd_cat = CAT     $@
891cmd_cat = cat $(filter-out $(PHONY), $^) > $@
892
893append = cat $(filter-out $< $(PHONY), $^) >> $@
894
895quiet_cmd_pad_cat = CAT     $@
896cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
897
898cfg: u-boot.cfg
899
900quiet_cmd_cfgcheck = CFGCHK  $2
901cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
902		$(srctree)/scripts/config_whitelist.txt $(srctree)
903
904all:		$(ALL-y) cfg
905ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
906	@echo "===================== WARNING ======================"
907	@echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
908	@echo "(possibly in a subsequent patch in your series)"
909	@echo "before sending patches to the mailing list."
910	@echo "===================================================="
911endif
912	@# Check that this build does not use CONFIG options that we do not
913	@# know about unless they are in Kconfig. All the existing CONFIG
914	@# options are whitelisted, so new ones should not be added.
915	$(call cmd,cfgcheck,u-boot.cfg)
916
917PHONY += dtbs
918dtbs: dts/dt.dtb
919	@:
920dts/dt.dtb: u-boot
921	$(Q)$(MAKE) $(build)=dts dtbs
922
923quiet_cmd_copy = COPY    $@
924      cmd_copy = cp $< $@
925
926ifeq ($(CONFIG_MULTI_DTB_FIT),y)
927
928fit-dtb.blob: dts/dt.dtb FORCE
929	$(call if_changed,mkimage)
930
931MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
932	-a 0 -e 0 -E \
933	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
934
935u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
936	$(call if_changed,cat)
937
938u-boot.bin: u-boot-fit-dtb.bin FORCE
939	$(call if_changed,copy)
940else ifeq ($(CONFIG_OF_SEPARATE),y)
941u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
942	$(call if_changed,cat)
943
944u-boot.bin: u-boot-dtb.bin FORCE
945	$(call if_changed,copy)
946else
947u-boot.bin: u-boot-nodtb.bin FORCE
948	$(call if_changed,copy)
949endif
950
951%.imx: %.bin
952	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
953
954%.vyb: %.imx
955	$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
956
957quiet_cmd_copy = COPY    $@
958      cmd_copy = cp $< $@
959
960u-boot.dtb: dts/dt.dtb
961	$(call cmd,copy)
962
963OBJCOPYFLAGS_u-boot.hex := -O ihex
964
965OBJCOPYFLAGS_u-boot.srec := -O srec
966
967u-boot.hex u-boot.srec: u-boot FORCE
968	$(call if_changed,objcopy)
969
970OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
971
972u-boot-elf.srec: u-boot.elf FORCE
973	$(call if_changed,objcopy)
974
975OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
976
977spl/u-boot-spl.srec: spl/u-boot-spl FORCE
978	$(call if_changed,objcopy)
979
980OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
981		$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec)
982
983binary_size_check: u-boot-nodtb.bin FORCE
984	@file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
985	map_size=$(shell cat u-boot.map | \
986		awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
987		| sed 's/0X//g' \
988		| bc); \
989	if [ "" != "$$map_size" ]; then \
990		if test $$map_size -ne $$file_size; then \
991			echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
992			echo "  but u-boot-nodtb.bin shows $$file_size" >&2 ; \
993			exit 1; \
994		fi \
995	fi
996
997ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
998ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
999subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
1000else
1001subtract_sys_malloc_f_len = true
1002endif
1003# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
1004# so low that the DTB could probably use 90%+ of the available space, for
1005# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
1006# safe for now and tweak this later if space becomes tight.
1007# A rejected alternative would be to check that some absolute minimum stack
1008# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
1009# deliberately build-specific, to take account of build-to-build stack usage
1010# differences due to different feature sets, there is no common absolute value
1011# to check against.
1012init_sp_bss_offset_check: u-boot.dtb FORCE
1013	@dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
1014	space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
1015	$(subtract_sys_malloc_f_len) ; \
1016	quarter_space=$$(($${space} / 4)) ; \
1017	if [ $${dtb_size} -gt $${quarter_space} ]; then \
1018		echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
1019		echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
1020		exit 1 ; \
1021	fi
1022endif
1023
1024u-boot-nodtb.bin: u-boot FORCE
1025	$(call if_changed,objcopy)
1026	$(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
1027	$(BOARD_SIZE_CHECK)
1028
1029u-boot.ldr:	u-boot
1030		$(CREATE_LDR_ENV)
1031		$(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
1032		$(BOARD_SIZE_CHECK)
1033
1034# binman
1035# ---------------------------------------------------------------------------
1036quiet_cmd_binman = BINMAN  $@
1037cmd_binman = $(srctree)/tools/binman/binman -d u-boot.dtb -O . \
1038		-I . -I $(srctree)/board/$(BOARDDIR) $<
1039
1040OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
1041
1042OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
1043
1044u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
1045	$(call if_changed,objcopy)
1046
1047#
1048# U-Boot entry point, needed for booting of full-blown U-Boot
1049# from the SPL U-Boot version.
1050#
1051ifndef CONFIG_SYS_UBOOT_START
1052CONFIG_SYS_UBOOT_START := 0
1053endif
1054
1055# Create a file containing the configuration options the image was built with
1056quiet_cmd_cpp_cfg = CFG     $@
1057cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
1058	-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
1059
1060# Boards with more complex image requirments can provide an .its source file
1061# or a generator script
1062ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
1063U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
1064else
1065ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
1066U_BOOT_ITS := u-boot.its
1067$(U_BOOT_ITS): FORCE
1068	$(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
1069	$(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
1070endif
1071endif
1072
1073ifdef CONFIG_SPL_LOAD_FIT
1074MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1075	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1076	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
1077	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
1078else
1079MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
1080	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1081	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1082MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
1083	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1084	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1085u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
1086CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
1087endif
1088
1089MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
1090
1091MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
1092	-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
1093
1094MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
1095	-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1096	$(if $(KEYDIR),-k $(KEYDIR))
1097
1098MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1099		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
1100
1101u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
1102		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
1103	$(call if_changed,mkimage)
1104
1105u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
1106	$(call if_changed,mkfitimage)
1107	$(BOARD_SIZE_CHECK)
1108
1109u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
1110	$(call if_changed,mkimage)
1111
1112u-boot.sha1:	u-boot.bin
1113		tools/ubsha1 u-boot.bin
1114
1115u-boot.dis:	u-boot
1116		$(OBJDUMP) -d $< > $@
1117
1118ifdef CONFIG_TPL
1119SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
1120else
1121SPL_PAYLOAD := u-boot.bin
1122endif
1123
1124OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
1125				   --pad-to=$(CONFIG_SPL_PAD_TO)
1126u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
1127	$(call if_changed,pad_cat)
1128
1129MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
1130
1131lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
1132	$(call if_changed,mkimage)
1133
1134OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1135
1136lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
1137	$(call if_changed,objcopy)
1138
1139OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1140
1141lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
1142	$(call if_changed,objcopy)
1143
1144lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
1145	$(call if_changed,cat)
1146
1147CLEAN_FILES += lpc32xx-*
1148
1149OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
1150				   --pad-to=$(CONFIG_TPL_PAD_TO)
1151tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
1152	$(call if_changed,pad_cat)
1153
1154SPL: spl/u-boot-spl.bin FORCE
1155	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1156
1157u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
1158	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1159
1160MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
1161
1162u-boot.ubl: u-boot-with-spl.bin FORCE
1163	$(call if_changed,mkimage)
1164
1165MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
1166	$(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
1167	-T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1168spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1169	$(call if_changed,mkimage)
1170
1171OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1172u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1173	$(call if_changed,pad_cat)
1174
1175u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1176	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
1177u-boot.sb: u-boot.bin spl/u-boot-spl.bin
1178	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
1179
1180# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
1181# Both images are created using mkimage (crc etc), so that the ROM
1182# bootloader can check its integrity. Padding needs to be done to the
1183# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
1184# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
1185# The resulting image containing both U-Boot images is called u-boot.spr
1186MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1187	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1188spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1189	$(call if_changed,mkimage)
1190
1191OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1192			  --gap-fill=0xff
1193u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1194	$(call if_changed,pad_cat)
1195
1196ifneq ($(CONFIG_ARCH_SOCFPGA),)
1197quiet_cmd_socboot = SOCBOOT $@
1198cmd_socboot = cat	spl/u-boot-spl.sfp spl/u-boot-spl.sfp	\
1199			spl/u-boot-spl.sfp spl/u-boot-spl.sfp	\
1200			u-boot.img > $@ || rm -f $@
1201u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
1202	$(call if_changed,socboot)
1203endif
1204
1205# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1206# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1207# the middle. This is handled by binman based on an image description in the
1208# board's device tree.
1209ifneq ($(CONFIG_X86_RESET_VECTOR),)
1210rom: u-boot.rom FORCE
1211
1212refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
1213	$(call if_changed,copy)
1214
1215quiet_cmd_ldr = LD      $@
1216cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1217	       $(filter-out FORCE,$^) -o $@
1218
1219u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
1220		$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
1221		$(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
1222	$(call if_changed,binman)
1223
1224OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1225u-boot-x86-16bit.bin: u-boot FORCE
1226	$(call if_changed,objcopy)
1227endif
1228
1229ifneq ($(CONFIG_ARCH_SUNXI),)
1230ifeq ($(CONFIG_ARM64),)
1231u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
1232	$(call if_changed,binman)
1233else
1234u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
1235	$(call if_changed,cat)
1236endif
1237endif
1238
1239ifneq ($(CONFIG_TEGRA),)
1240ifneq ($(CONFIG_BINMAN),)
1241u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin: \
1242		spl/u-boot-spl u-boot.bin FORCE
1243	$(call if_changed,binman)
1244else
1245OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1246u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
1247	$(call if_changed,pad_cat)
1248
1249OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1250u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
1251	$(call if_changed,pad_cat)
1252
1253u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
1254	$(call if_changed,copy)
1255endif  # binman
1256endif
1257
1258OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1259u-boot-app.efi: u-boot FORCE
1260	$(call if_changed,zobjcopy)
1261
1262u-boot.bin.o: u-boot.bin FORCE
1263	$(call if_changed,efipayload)
1264
1265u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1266	$(call if_changed_dep,cpp_lds)
1267
1268# Rule to link the EFI payload which contains a stub and a U-Boot binary
1269quiet_cmd_u-boot_payload ?= LD      $@
1270      cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
1271      -T u-boot-payload.lds arch/x86/cpu/call32.o \
1272      lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
1273      $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
1274
1275u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
1276	$(call if_changed,u-boot_payload)
1277
1278OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1279u-boot-payload.efi: u-boot-payload FORCE
1280	$(call if_changed,zobjcopy)
1281
1282u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1283	$(call if_changed,cat)
1284
1285#Add a target to create boot binary having SPL binary in PBI format
1286#concatenated with u-boot binary. It is need by PowerPC SoC having
1287#internal SRAM <= 512KB.
1288MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1289		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1290		-A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
1291
1292spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1293	$(call if_changed,mkimage)
1294
1295ifeq ($(ARCH),arm)
1296UBOOT_BINLOAD := u-boot.img
1297else
1298UBOOT_BINLOAD := u-boot.bin
1299endif
1300
1301OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1302			  --gap-fill=0xff
1303
1304u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
1305	$(call if_changed,pad_cat)
1306
1307# PPC4xx needs the SPL at the end of the image, since the reset vector
1308# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1309# and need to introduce a new build target with the full blown U-Boot
1310# at the start padded up to the start of the SPL image. And then concat
1311# the SPL image to the end.
1312
1313OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1314	--pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1315u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1316	$(call if_changed,pad_cat)
1317
1318# Create a new ELF from a raw binary file.
1319ifndef PLATFORM_ELFENTRY
1320  PLATFORM_ELFENTRY = "_start"
1321endif
1322quiet_cmd_u-boot-elf ?= LD      $@
1323	cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
1324	--defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
1325	-Ttext=$(CONFIG_SYS_TEXT_BASE)
1326u-boot.elf: u-boot.bin
1327	$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
1328	$(call if_changed,u-boot-elf)
1329
1330ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
1331
1332# Rule to link u-boot
1333# May be overridden by arch/$(ARCH)/config.mk
1334quiet_cmd_u-boot__ ?= LD      $@
1335      cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1336      -T u-boot.lds $(u-boot-init)                             \
1337      --start-group $(u-boot-main) --end-group                 \
1338      $(PLATFORM_LIBS) -Map u-boot.map;                        \
1339      $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
1340
1341quiet_cmd_smap = GEN     common/system_map.o
1342cmd_smap = \
1343	smap=`$(call SYSTEM_MAP,u-boot) | \
1344		awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1345	$(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1346		-c $(srctree)/common/system_map.c -o common/system_map.o
1347
1348u-boot:	$(u-boot-init) $(u-boot-main) u-boot.lds FORCE
1349	+$(call if_changed,u-boot__)
1350ifeq ($(CONFIG_KALLSYMS),y)
1351	$(call cmd,smap)
1352	$(call cmd,u-boot__) common/system_map.o
1353endif
1354
1355ifeq ($(CONFIG_RISCV),y)
1356	@tools/prelink-riscv $@ 0
1357endif
1358
1359quiet_cmd_sym ?= SYM     $@
1360      cmd_sym ?= $(OBJDUMP) -t $< > $@
1361u-boot.sym: u-boot FORCE
1362	$(call if_changed,sym)
1363
1364# The actual objects are generated when descending,
1365# make sure no implicit rule kicks in
1366$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
1367
1368# Handle descending into subdirectories listed in $(vmlinux-dirs)
1369# Preset locale variables to speed up the build process. Limit locale
1370# tweaks to this spot to avoid wrong language settings when running
1371# make menuconfig etc.
1372# Error messages still appears in the original language
1373
1374PHONY += $(u-boot-dirs)
1375$(u-boot-dirs): prepare scripts
1376	$(Q)$(MAKE) $(build)=$@
1377
1378tools: prepare
1379# The "tools" are needed early
1380$(filter-out tools, $(u-boot-dirs)): tools
1381# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1382# is "yes"), so compile examples after U-Boot is compiled.
1383examples: $(filter-out examples, $(u-boot-dirs))
1384
1385define filechk_uboot.release
1386	echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1387endef
1388
1389# Store (new) UBOOTRELEASE string in include/config/uboot.release
1390include/config/uboot.release: include/config/auto.conf FORCE
1391	$(call filechk,uboot.release)
1392
1393
1394# Things we need to do before we recursively start building the kernel
1395# or the modules are listed in "prepare".
1396# A multi level approach is used. prepareN is processed before prepareN-1.
1397# archprepare is used in arch Makefiles and when processed asm symlink,
1398# version.h and scripts_basic is processed / created.
1399
1400# Listed in dependency order
1401PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1402
1403# prepare3 is used to check if we are building in a separate output directory,
1404# and if so do:
1405# 1) Check that make has not been executed in the kernel src $(srctree)
1406prepare3: include/config/uboot.release
1407ifneq ($(KBUILD_SRC),)
1408	@$(kecho) '  Using $(srctree) as source for U-Boot'
1409	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1410		echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
1411		echo >&2 "  in the '$(srctree)' directory.";\
1412		/bin/false; \
1413	fi;
1414endif
1415
1416# prepare2 creates a makefile if using a separate output directory
1417prepare2: prepare3 outputmakefile
1418
1419prepare1: prepare2 $(version_h) $(timestamp_h) \
1420                   include/config/auto.conf
1421ifeq ($(wildcard $(LDSCRIPT)),)
1422	@echo >&2 "  Could not find linker script."
1423	@/bin/false
1424endif
1425
1426ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
1427prepare1: $(defaultenv_h)
1428endif
1429
1430archprepare: prepare1 scripts_basic
1431
1432prepare0: archprepare FORCE
1433	$(Q)$(MAKE) $(build)=.
1434
1435# All the preparing..
1436prepare: prepare0
1437
1438# Generate some files
1439# ---------------------------------------------------------------------------
1440
1441define filechk_version.h
1442	(echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1443	echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1444	echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1445	echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
1446endef
1447
1448# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1449# The BSD date on the other hand behaves different and would produce errors
1450# with the misused '-d' switch.  Respect that and search a working date with
1451# well known pre- and suffixes for the GNU variant of date.
1452define filechk_timestamp.h
1453	(if test -n "$${SOURCE_DATE_EPOCH}"; then \
1454		SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
1455		DATE=""; \
1456		for date in gdate date.gnu date; do \
1457			$${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1458		done; \
1459		if test -n "$${DATE}"; then \
1460			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1461			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1462			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
1463			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1464			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
1465		else \
1466			return 42; \
1467		fi; \
1468	else \
1469		LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1470		LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1471		LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
1472		LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1473		LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
1474	fi)
1475endef
1476
1477define filechk_defaultenv.h
1478	(grep -v '^#' | \
1479	 grep -v '^$$' | \
1480	 tr '\n' '\0' | \
1481	 sed -e 's/\\\x0/\n/' | \
1482	 xxd -i ; echo ", 0x00" ; )
1483endef
1484
1485$(version_h): include/config/uboot.release FORCE
1486	$(call filechk,version.h)
1487
1488$(timestamp_h): $(srctree)/Makefile FORCE
1489	$(call filechk,timestamp.h)
1490
1491$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
1492	$(call filechk,defaultenv.h)
1493
1494# ---------------------------------------------------------------------------
1495quiet_cmd_cpp_lds = LDS     $@
1496cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
1497		-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
1498
1499u-boot.lds: $(LDSCRIPT) prepare FORCE
1500	$(call if_changed_dep,cpp_lds)
1501
1502spl/u-boot-spl.bin: spl/u-boot-spl
1503	@:
1504spl/u-boot-spl: tools prepare \
1505		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
1506		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
1507	$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
1508
1509spl/sunxi-spl.bin: spl/u-boot-spl
1510	@:
1511
1512spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
1513	@:
1514
1515spl/u-boot-spl.sfp: spl/u-boot-spl
1516	@:
1517
1518spl/boot.bin: spl/u-boot-spl
1519	@:
1520
1521tpl/u-boot-tpl.bin: tools prepare \
1522		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
1523	$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
1524
1525TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
1526
1527FIND := find
1528FINDFLAGS := -L
1529
1530tags ctags:
1531		ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1532						-name '*.[chS]' -print`
1533		ln -s ctags tags
1534
1535etags:
1536		etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1537						-name '*.[chS]' -print`
1538cscope:
1539		$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1540						cscope.files
1541		cscope -b -q -k
1542
1543SYSTEM_MAP = \
1544		$(NM) $1 | \
1545		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1546		LC_ALL=C sort
1547System.map:	u-boot
1548		@$(call SYSTEM_MAP,$<) > $@
1549
1550#########################################################################
1551
1552# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1553# R_AARCH64_RELATIVE (64-bit).
1554checkarmreloc: u-boot
1555	@RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1556		grep R_A | sort -u`"; \
1557	if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1558		 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1559		echo "$< contains unexpected relocations: $$RELOC"; \
1560		false; \
1561	fi
1562
1563envtools: scripts_basic $(version_h) $(timestamp_h)
1564	$(Q)$(MAKE) $(build)=tools/env
1565
1566tools-only: scripts_basic $(version_h) $(timestamp_h)
1567	$(Q)$(MAKE) $(build)=tools
1568
1569tools-all: export HOST_TOOLS_ALL=y
1570tools-all: envtools tools ;
1571
1572cross_tools: export CROSS_BUILD_TOOLS=y
1573cross_tools: tools ;
1574
1575.PHONY : CHANGELOG
1576CHANGELOG:
1577	git log --no-merges U-Boot-1_1_5.. | \
1578	unexpand -a | sed -e 's/\s\s*$$//' > $@
1579
1580#########################################################################
1581
1582###
1583# Cleaning is done on three levels.
1584# make clean     Delete most generated files
1585#                Leave enough to build external modules
1586# make mrproper  Delete the current configuration, and all generated files
1587# make distclean Remove editor backup files, patch leftover files and the like
1588
1589# Directories & files removed with 'make clean'
1590CLEAN_DIRS  += $(MODVERDIR) \
1591	       $(foreach d, spl tpl, $(patsubst %,$d/%, \
1592			$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
1593
1594CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
1595	       boot* u-boot* MLO* SPL System.map fit-dtb.blob
1596
1597# Directories & files removed with 'make mrproper'
1598MRPROPER_DIRS  += include/config include/generated spl tpl \
1599		  .tmp_objdiff
1600MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1601		  ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1602
1603# clean - Delete most, but leave enough to build external modules
1604#
1605clean: rm-dirs  := $(CLEAN_DIRS)
1606clean: rm-files := $(CLEAN_FILES)
1607
1608clean-dirs	:= $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
1609
1610clean-dirs      := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
1611
1612PHONY += $(clean-dirs) clean archclean
1613$(clean-dirs):
1614	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1615
1616# TODO: Do not use *.cfgtmp
1617clean: $(clean-dirs)
1618	$(call cmd,rmdirs)
1619	$(call cmd,rmfiles)
1620	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1621		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1622		-o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1623		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1624		-o -name '*.lex.c' -o -name '*.tab.[ch]' \
1625		-o -name '*.symtypes' -o -name 'modules.order' \
1626		-o -name modules.builtin -o -name '.tmp_*.o.*' \
1627		-o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
1628		-o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
1629		-type f -print | xargs rm -f
1630
1631# mrproper - Delete all generated files, including .config
1632#
1633mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1634mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1635mrproper-dirs      := $(addprefix _mrproper_,scripts)
1636
1637PHONY += $(mrproper-dirs) mrproper archmrproper
1638$(mrproper-dirs):
1639	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1640
1641mrproper: clean $(mrproper-dirs)
1642	$(call cmd,rmdirs)
1643	$(call cmd,rmfiles)
1644	@rm -f arch/*/include/asm/arch
1645
1646# distclean
1647#
1648PHONY += distclean
1649
1650distclean: mrproper
1651	@find $(srctree) $(RCS_FIND_IGNORE) \
1652		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1653		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1654		-o -name '.*.rej' -o -name '*%' -o -name 'core' \
1655		-o -name '*.pyc' \) \
1656		-type f -print | xargs rm -f
1657	@rm -f boards.cfg
1658
1659backup:
1660	F=`basename $(srctree)` ; cd .. ; \
1661	gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1662
1663help:
1664	@echo  'Cleaning targets:'
1665	@echo  '  clean		  - Remove most generated files but keep the config'
1666	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
1667	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
1668	@echo  ''
1669	@echo  'Configuration targets:'
1670	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1671	@echo  ''
1672	@echo  'Other generic targets:'
1673	@echo  '  all		  - Build all necessary images depending on configuration'
1674	@echo  '  tests		  - Build U-Boot for sandbox and run tests'
1675	@echo  '* u-boot	  - Build the bare u-boot'
1676	@echo  '  dir/            - Build all files in dir and below'
1677	@echo  '  dir/file.[oisS] - Build specified target only'
1678	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1679	@echo  '                    (requires a recent binutils and recent build (System.map))'
1680	@echo  '  tags/ctags	  - Generate ctags file for editors'
1681	@echo  '  etags		  - Generate etags file for editors'
1682	@echo  '  cscope	  - Generate cscope index'
1683	@echo  '  ubootrelease	  - Output the release version string (use with make -s)'
1684	@echo  '  ubootversion	  - Output the version stored in Makefile (use with make -s)'
1685	@echo  "  cfg		  - Don't build, just create the .cfg files"
1686	@echo  "  envtools	  - Build only the target-side environment tools"
1687	@echo  ''
1688	@echo  'Static analysers'
1689	@echo  '  checkstack      - Generate a list of stack hogs'
1690	@echo  '  coccicheck      - Execute static code analysis with Coccinelle'
1691	@echo  ''
1692	@echo  'Documentation targets:'
1693	@$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1694	@echo  ''
1695	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1696	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1697	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1698	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1699	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1700	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1701	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1702	@echo  '		1: warnings which may be relevant and do not occur too often'
1703	@echo  '		2: warnings which occur quite often but may still be relevant'
1704	@echo  '		3: more obscure warnings, can most likely be ignored'
1705	@echo  '		Multiple levels can be combined with W=12 or W=123'
1706	@echo  ''
1707	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
1708	@echo  'For further info see the ./README file'
1709
1710tests:
1711	$(srctree)/test/run
1712
1713# Documentation targets
1714# ---------------------------------------------------------------------------
1715%docs: scripts_basic FORCE
1716	$(Q)$(MAKE) $(build)=scripts build_docproc
1717	$(Q)$(MAKE) $(build)=doc/DocBook $@
1718
1719endif #ifeq ($(config-targets),1)
1720endif #ifeq ($(mixed-targets),1)
1721
1722PHONY += checkstack ubootrelease ubootversion
1723
1724checkstack:
1725	$(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1726	$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1727
1728ubootrelease:
1729	@echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1730
1731ubootversion:
1732	@echo $(UBOOTVERSION)
1733
1734# Single targets
1735# ---------------------------------------------------------------------------
1736# Single targets are compatible with:
1737# - build with mixed source and output
1738# - build with separate output dir 'make O=...'
1739# - external modules
1740#
1741#  target-dir => where to store outputfile
1742#  build-dir  => directory in kernel source tree to use
1743
1744ifeq ($(KBUILD_EXTMOD),)
1745        build-dir  = $(patsubst %/,%,$(dir $@))
1746        target-dir = $(dir $@)
1747else
1748        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1749        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1750        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1751endif
1752
1753%.s: %.c prepare scripts FORCE
1754	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1755%.i: %.c prepare scripts FORCE
1756	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1757%.o: %.c prepare scripts FORCE
1758	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1759%.lst: %.c prepare scripts FORCE
1760	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1761%.s: %.S prepare scripts FORCE
1762	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1763%.o: %.S prepare scripts FORCE
1764	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1765%.symtypes: %.c prepare scripts FORCE
1766	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1767
1768# Modules
1769/: prepare scripts FORCE
1770	$(cmd_crmodverdir)
1771	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1772	$(build)=$(build-dir)
1773%/: prepare scripts FORCE
1774	$(cmd_crmodverdir)
1775	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1776	$(build)=$(build-dir)
1777%.ko: prepare scripts FORCE
1778	$(cmd_crmodverdir)
1779	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1780	$(build)=$(build-dir) $(@:.ko=.o)
1781	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1782
1783# Consistency checks
1784# ---------------------------------------------------------------------------
1785
1786PHONY += coccicheck
1787
1788coccicheck:
1789	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1790
1791# FIXME Should go into a make.lib or something
1792# ===========================================================================
1793
1794quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1795      cmd_rmdirs = rm -rf $(rm-dirs)
1796
1797quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1798      cmd_rmfiles = rm -f $(rm-files)
1799
1800# read all saved command lines
1801
1802targets := $(wildcard $(sort $(targets)))
1803cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1804
1805ifneq ($(cmd_files),)
1806  $(cmd_files): ;	# Do not try to update included dependency files
1807  include $(cmd_files)
1808endif
1809
1810endif	# skip-makefile
1811
1812PHONY += FORCE
1813FORCE:
1814
1815# Declare the contents of the .PHONY variable as phony.  We keep that
1816# information in a variable so we can use it in if_changed and friends.
1817.PHONY: $(PHONY)
1818