1# 2# (C) Copyright 2000-2009 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 2009 25PATCHLEVEL = 08 26SUBLEVEL = 27EXTRAVERSION = 28ifneq "$(SUBLEVEL)" "" 29U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 30else 31U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) 32endif 33TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h 34VERSION_FILE = $(obj)include/version_autogenerated.h 35 36HOSTARCH := $(shell uname -m | \ 37 sed -e s/i.86/i386/ \ 38 -e s/sun4u/sparc64/ \ 39 -e s/arm.*/arm/ \ 40 -e s/sa110/arm/ \ 41 -e s/powerpc/ppc/ \ 42 -e s/ppc64/ppc/ \ 43 -e s/macppc/ppc/) 44 45HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 46 sed -e 's/\(cygwin\).*/cygwin/') 47 48# Set shell to bash if possible, otherwise fall back to sh 49SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 50 else if [ -x /bin/bash ]; then echo /bin/bash; \ 51 else echo sh; fi; fi) 52 53export HOSTARCH HOSTOS SHELL 54 55# Deal with colliding definitions from tcsh etc. 56VENDOR= 57 58######################################################################### 59# Allow for silent builds 60ifeq (,$(findstring s,$(MAKEFLAGS))) 61XECHO = echo 62else 63XECHO = : 64endif 65 66######################################################################### 67# 68# U-boot build supports producing a object files to the separate external 69# directory. Two use cases are supported: 70# 71# 1) Add O= to the make command line 72# 'make O=/tmp/build all' 73# 74# 2) Set environement variable BUILD_DIR to point to the desired location 75# 'export BUILD_DIR=/tmp/build' 76# 'make' 77# 78# The second approach can also be used with a MAKEALL script 79# 'export BUILD_DIR=/tmp/build' 80# './MAKEALL' 81# 82# Command line 'O=' setting overrides BUILD_DIR environent variable. 83# 84# When none of the above methods is used the local build is performed and 85# the object files are placed in the source directory. 86# 87 88ifdef O 89ifeq ("$(origin O)", "command line") 90BUILD_DIR := $(O) 91endif 92endif 93 94ifneq ($(BUILD_DIR),) 95saved-output := $(BUILD_DIR) 96 97# Attempt to create a output directory. 98$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) 99 100# Verify if it was successful. 101BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) 102$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) 103endif # ifneq ($(BUILD_DIR),) 104 105OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) 106SRCTREE := $(CURDIR) 107TOPDIR := $(SRCTREE) 108LNDIR := $(OBJTREE) 109export TOPDIR SRCTREE OBJTREE 110 111MKCONFIG := $(SRCTREE)/mkconfig 112export MKCONFIG 113 114ifneq ($(OBJTREE),$(SRCTREE)) 115REMOTE_BUILD := 1 116export REMOTE_BUILD 117endif 118 119# $(obj) and (src) are defined in config.mk but here in main Makefile 120# we also need them before config.mk is included which is the case for 121# some targets like unconfig, clean, clobber, distclean, etc. 122ifneq ($(OBJTREE),$(SRCTREE)) 123obj := $(OBJTREE)/ 124src := $(SRCTREE)/ 125else 126obj := 127src := 128endif 129export obj src 130 131# Make sure CDPATH settings don't interfere 132unexport CDPATH 133 134######################################################################### 135 136ifeq ($(ARCH),powerpc) 137ARCH = ppc 138endif 139 140# The "tools" are needed early, so put this first 141# Don't include stuff already done in $(LIBS) 142SUBDIRS = tools \ 143 examples/standalone \ 144 examples/api 145 146.PHONY : $(SUBDIRS) 147 148ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) 149 150# Include autoconf.mk before config.mk so that the config options are available 151# to all top level build files. We need the dummy all: target to prevent the 152# dependency target in autoconf.mk.dep from being the default. 153all: 154sinclude $(obj)include/autoconf.mk.dep 155sinclude $(obj)include/autoconf.mk 156 157# load ARCH, BOARD, and CPU configuration 158include $(obj)include/config.mk 159export ARCH CPU BOARD VENDOR SOC 160 161# set default to nothing for native builds 162ifeq ($(HOSTARCH),$(ARCH)) 163CROSS_COMPILE ?= 164endif 165 166# load other configuration 167include $(TOPDIR)/config.mk 168 169######################################################################### 170# U-Boot objects....order is important (i.e. start must be first) 171 172OBJS = cpu/$(CPU)/start.o 173ifeq ($(CPU),i386) 174OBJS += cpu/$(CPU)/start16.o 175OBJS += cpu/$(CPU)/resetvec.o 176endif 177ifeq ($(CPU),ppc4xx) 178OBJS += cpu/$(CPU)/resetvec.o 179endif 180ifeq ($(CPU),mpc85xx) 181OBJS += cpu/$(CPU)/resetvec.o 182endif 183 184OBJS := $(addprefix $(obj),$(OBJS)) 185 186LIBS = lib_generic/libgeneric.a 187LIBS += lib_generic/lzma/liblzma.a 188LIBS += lib_generic/lzo/liblzo.a 189LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ 190 "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) 191LIBS += cpu/$(CPU)/lib$(CPU).a 192ifdef SOC 193LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 194endif 195ifeq ($(CPU),ixp) 196LIBS += cpu/ixp/npe/libnpe.a 197endif 198LIBS += lib_$(ARCH)/lib$(ARCH).a 199LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 200 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \ 201 fs/ubifs/libubifs.a 202LIBS += net/libnet.a 203LIBS += disk/libdisk.a 204LIBS += drivers/bios_emulator/libatibiosemu.a 205LIBS += drivers/block/libblock.a 206LIBS += drivers/dma/libdma.a 207LIBS += drivers/fpga/libfpga.a 208LIBS += drivers/gpio/libgpio.a 209LIBS += drivers/hwmon/libhwmon.a 210LIBS += drivers/i2c/libi2c.a 211LIBS += drivers/input/libinput.a 212LIBS += drivers/misc/libmisc.a 213LIBS += drivers/mmc/libmmc.a 214LIBS += drivers/mtd/libmtd.a 215LIBS += drivers/mtd/nand/libnand.a 216LIBS += drivers/mtd/onenand/libonenand.a 217LIBS += drivers/mtd/ubi/libubi.a 218LIBS += drivers/mtd/spi/libspi_flash.a 219LIBS += drivers/net/libnet.a 220LIBS += drivers/net/phy/libphy.a 221LIBS += drivers/net/sk98lin/libsk98lin.a 222LIBS += drivers/pci/libpci.a 223LIBS += drivers/pcmcia/libpcmcia.a 224LIBS += drivers/power/libpower.a 225LIBS += drivers/spi/libspi.a 226ifeq ($(CPU),mpc83xx) 227LIBS += drivers/qe/qe.a 228endif 229ifeq ($(CPU),mpc85xx) 230LIBS += drivers/qe/qe.a 231LIBS += cpu/mpc8xxx/ddr/libddr.a 232LIBS += cpu/mpc8xxx/lib8xxx.a 233TAG_SUBDIRS += cpu/mpc8xxx 234endif 235ifeq ($(CPU),mpc86xx) 236LIBS += cpu/mpc8xxx/ddr/libddr.a 237LIBS += cpu/mpc8xxx/lib8xxx.a 238TAG_SUBDIRS += cpu/mpc8xxx 239endif 240LIBS += drivers/rtc/librtc.a 241LIBS += drivers/serial/libserial.a 242LIBS += drivers/twserial/libtws.a 243LIBS += drivers/usb/gadget/libusb_gadget.a 244LIBS += drivers/usb/host/libusb_host.a 245LIBS += drivers/usb/musb/libusb_musb.a 246LIBS += drivers/video/libvideo.a 247LIBS += drivers/watchdog/libwatchdog.a 248LIBS += common/libcommon.a 249LIBS += libfdt/libfdt.a 250LIBS += api/libapi.a 251LIBS += post/libpost.a 252 253LIBS := $(addprefix $(obj),$(LIBS)) 254.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) 255 256LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a 257LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) 258 259# Add GCC lib 260ifdef USE_PRIVATE_LIBGCC 261ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") 262PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc 263else 264PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc 265endif 266else 267PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 268endif 269PLATFORM_LIBS += $(PLATFORM_LIBGCC) 270export PLATFORM_LIBS 271 272# Special flags for CPP when processing the linker script. 273# Pass the version down so we can handle backwards compatibility 274# on the fly. 275LDPPFLAGS += \ 276 -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ 277 $(shell $(LD) --version | \ 278 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 279 280ifeq ($(CONFIG_NAND_U_BOOT),y) 281NAND_SPL = nand_spl 282U_BOOT_NAND = $(obj)u-boot-nand.bin 283endif 284 285ifeq ($(CONFIG_ONENAND_U_BOOT),y) 286ONENAND_IPL = onenand_ipl 287U_BOOT_ONENAND = $(obj)u-boot-onenand.bin 288ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin 289endif 290 291__OBJS := $(subst $(obj),,$(OBJS)) 292__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) 293 294######################################################################### 295######################################################################### 296 297# Always append ALL so that arch config.mk's can add custom ones 298ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) 299 300all: $(ALL) 301 302$(obj)u-boot.hex: $(obj)u-boot 303 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 304 305$(obj)u-boot.srec: $(obj)u-boot 306 $(OBJCOPY) -O srec $< $@ 307 308$(obj)u-boot.bin: $(obj)u-boot 309 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 310 311$(obj)u-boot.ldr: $(obj)u-boot 312 $(obj)tools/envcrc --binary > $(obj)env-ldr.o 313 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) 314 315$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr 316 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 317 318$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr 319 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 320 321$(obj)u-boot.img: $(obj)u-boot.bin 322 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 323 -a $(TEXT_BASE) -e 0 \ 324 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 325 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 326 -d $< $@ 327 328$(obj)u-boot.kwb: $(obj)u-boot.bin 329 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \ 330 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@ 331 332$(obj)u-boot.sha1: $(obj)u-boot.bin 333 $(obj)tools/ubsha1 $(obj)u-boot.bin 334 335$(obj)u-boot.dis: $(obj)u-boot 336 $(OBJDUMP) -d $< > $@ 337 338GEN_UBOOT = \ 339 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ 340 sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 341 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ 342 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ 343 -Map u-boot.map -o u-boot 344$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds 345 $(GEN_UBOOT) 346ifeq ($(CONFIG_KALLSYMS),y) 347 smap=`$(call SYSTEM_MAP,u-boot) | \ 348 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 349 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ 350 -c common/system_map.c -o $(obj)common/system_map.o 351 $(GEN_UBOOT) $(obj)common/system_map.o 352endif 353 354$(OBJS): depend 355 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) 356 357$(LIBS): depend $(SUBDIRS) 358 $(MAKE) -C $(dir $(subst $(obj),,$@)) 359 360$(LIBBOARD): depend $(LIBS) 361 $(MAKE) -C $(dir $(subst $(obj),,$@)) 362 363$(SUBDIRS): depend 364 $(MAKE) -C $@ all 365 366$(LDSCRIPT): depend 367 $(MAKE) -C $(dir $@) $(notdir $@) 368 369$(obj)u-boot.lds: $(LDSCRIPT) 370 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ 371 372$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 373 $(MAKE) -C nand_spl/board/$(BOARDDIR) all 374 375$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin 376 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin 377 378$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 379 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all 380 381$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin 382 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin 383 384$(VERSION_FILE): 385 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ 386 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp 387 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 388 389$(TIMESTAMP_FILE): 390 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ 391 @date +'#define U_BOOT_TIME "%T"' >> $@ 392 393gdbtools: 394 $(MAKE) -C tools/gdb all || exit 1 395 396updater: 397 $(MAKE) -C tools/updater all || exit 1 398 399env: 400 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 401 402depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 403 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done 404 405TAG_SUBDIRS += include 406TAG_SUBDIRS += lib_generic board/$(BOARDDIR) 407TAG_SUBDIRS += cpu/$(CPU) 408TAG_SUBDIRS += lib_$(ARCH) 409TAG_SUBDIRS += fs/cramfs 410TAG_SUBDIRS += fs/fat 411TAG_SUBDIRS += fs/fdos 412TAG_SUBDIRS += fs/jffs2 413TAG_SUBDIRS += fs/yaffs2 414TAG_SUBDIRS += net 415TAG_SUBDIRS += disk 416TAG_SUBDIRS += common 417TAG_SUBDIRS += drivers/bios_emulator 418TAG_SUBDIRS += drivers/block 419TAG_SUBDIRS += drivers/gpio 420TAG_SUBDIRS += drivers/hwmon 421TAG_SUBDIRS += drivers/i2c 422TAG_SUBDIRS += drivers/input 423TAG_SUBDIRS += drivers/misc 424TAG_SUBDIRS += drivers/mmc 425TAG_SUBDIRS += drivers/mtd 426TAG_SUBDIRS += drivers/mtd/nand 427TAG_SUBDIRS += drivers/mtd/onenand 428TAG_SUBDIRS += drivers/mtd/spi 429TAG_SUBDIRS += drivers/net 430TAG_SUBDIRS += drivers/net/sk98lin 431TAG_SUBDIRS += drivers/pci 432TAG_SUBDIRS += drivers/pcmcia 433TAG_SUBDIRS += drivers/qe 434TAG_SUBDIRS += drivers/rtc 435TAG_SUBDIRS += drivers/serial 436TAG_SUBDIRS += drivers/spi 437TAG_SUBDIRS += drivers/usb 438TAG_SUBDIRS += drivers/video 439 440tags ctags: 441 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 442 -name '*.[ch]' -print` 443 444etags: 445 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 446 -name '*.[ch]' -print` 447cscope: 448 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ 449 > cscope.files 450 cscope -b -q -k 451 452SYSTEM_MAP = \ 453 $(NM) $1 | \ 454 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 455 LC_ALL=C sort 456$(obj)System.map: $(obj)u-boot 457 @$(call SYSTEM_MAP,$<) > $(obj)System.map 458 459# 460# Auto-generate the autoconf.mk file (which is included by all makefiles) 461# 462# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 463# the dep file is only include in this top level makefile to determine when 464# to regenerate the autoconf.mk file. 465$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h 466 @$(XECHO) Generating $@ ; \ 467 set -e ; \ 468 : Generate the dependancies ; \ 469 $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \ 470 -MQ $(obj)include/autoconf.mk include/common.h > $@ 471 472$(obj)include/autoconf.mk: $(obj)include/config.h 473 @$(XECHO) Generating $@ ; \ 474 set -e ; \ 475 : Extract the config macros ; \ 476 $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ 477 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ 478 mv $@.tmp $@ 479 480######################################################################### 481else # !config.mk 482all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ 483$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ 484$(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \ 485dep tags ctags etags cscope $(obj)System.map: 486 @echo "System not configured - see README" >&2 487 @ exit 1 488endif # config.mk 489 490.PHONY : CHANGELOG 491CHANGELOG: 492 git log --no-merges U-Boot-1_1_5.. | \ 493 unexpand -a | sed -e 's/\s\s*$$//' > $@ 494 495include/license.h: tools/bin2header COPYING 496 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 497######################################################################### 498 499unconfig: 500 @rm -f $(obj)include/config.h $(obj)include/config.mk \ 501 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ 502 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep 503 504#======================================================================== 505# PowerPC 506#======================================================================== 507 508######################################################################### 509## MPC5xx Systems 510######################################################################### 511 512canmb_config: unconfig 513 @$(MKCONFIG) -a canmb ppc mpc5xxx canmb 514 515cmi_mpc5xx_config: unconfig 516 @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi 517 518PATI_config: unconfig 519 @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl 520 521######################################################################### 522## MPC5xxx Systems 523######################################################################### 524 525aev_config: unconfig 526 @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc 527 528BC3450_config: unconfig 529 @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 530 531cm5200_config: unconfig 532 @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 533 534cpci5200_config: unconfig 535 @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd 536 537digsy_mtc_config \ 538digsy_mtc_LOWBOOT_config \ 539digsy_mtc_RAMBOOT_config: unconfig 540 @mkdir -p $(obj)include 541 @mkdir -p $(obj)board/digsy_mtc 542 @ >$(obj)include/config.h 543 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 544 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ 545 echo "... with LOWBOOT configuration" ; \ 546 } 547 @[ -z "$(findstring RAMBOOT_,$@)" ] || \ 548 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ 549 echo "... with RAMBOOT configuration" ; \ 550 } 551 @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc 552 553galaxy5200_LOWBOOT_config \ 554galaxy5200_config: unconfig 555 @mkdir -p $(obj)include 556 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 557 @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200 558 559hmi1001_config: unconfig 560 @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 561 562Lite5200_config \ 563Lite5200_LOWBOOT_config \ 564Lite5200_LOWBOOT08_config \ 565icecube_5200_config \ 566icecube_5200_LOWBOOT_config \ 567icecube_5200_LOWBOOT08_config \ 568icecube_5200_DDR_config \ 569icecube_5200_DDR_LOWBOOT_config \ 570icecube_5200_DDR_LOWBOOT08_config \ 571icecube_5100_config: unconfig 572 @mkdir -p $(obj)include 573 @mkdir -p $(obj)board/icecube 574 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 575 { if [ "$(findstring DDR,$@)" ] ; \ 576 then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 577 else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 578 fi ; \ 579 $(XECHO) "... with LOWBOOT configuration" ; \ 580 } 581 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 582 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 583 echo "... with 8 MB flash only" ; \ 584 $(XECHO) "... with LOWBOOT configuration" ; \ 585 } 586 @[ -z "$(findstring DDR,$@)" ] || \ 587 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 588 $(XECHO) "... DDR memory revision" ; \ 589 } 590 @[ -z "$(findstring 5200,$@)" ] || \ 591 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 592 $(XECHO) "... with MPC5200 processor" ; \ 593 } 594 @[ -z "$(findstring 5100,$@)" ] || \ 595 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 596 $(XECHO) "... with MGT5100 processor" ; \ 597 } 598 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 599 600jupiter_config: unconfig 601 @$(MKCONFIG) jupiter ppc mpc5xxx jupiter 602 603inka4x0_config: unconfig 604 @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 605 606lite5200b_config \ 607lite5200b_PM_config \ 608lite5200b_LOWBOOT_config: unconfig 609 @mkdir -p $(obj)include 610 @mkdir -p $(obj)board/icecube 611 @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h 612 @ $(XECHO) "... DDR memory revision" 613 @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h 614 @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h 615 @[ -z "$(findstring _PM_,$@)" ] || \ 616 { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ 617 $(XECHO) "... with power management (low-power mode) support" ; \ 618 } 619 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 620 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 621 $(XECHO) "... with LOWBOOT configuration" ; \ 622 } 623 @ $(XECHO) "... with MPC5200B processor" 624 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 625 626mcc200_config \ 627mcc200_SDRAM_config \ 628mcc200_highboot_config \ 629mcc200_COM12_config \ 630mcc200_COM12_SDRAM_config \ 631mcc200_COM12_highboot_config \ 632mcc200_COM12_highboot_SDRAM_config \ 633mcc200_highboot_SDRAM_config \ 634prs200_config \ 635prs200_DDR_config \ 636prs200_highboot_config \ 637prs200_highboot_DDR_config: unconfig 638 @mkdir -p $(obj)include 639 @mkdir -p $(obj)board/mcc200 640 @[ -n "$(findstring highboot,$@)" ] || \ 641 { $(XECHO) "... with lowboot configuration" ; \ 642 } 643 @[ -z "$(findstring highboot,$@)" ] || \ 644 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ 645 $(XECHO) "... with highboot configuration" ; \ 646 } 647 @[ -n "$(findstring _SDRAM,$@)" ] || \ 648 { if [ -n "$(findstring mcc200,$@)" ]; \ 649 then \ 650 $(XECHO) "... with DDR" ; \ 651 else \ 652 if [ -n "$(findstring _DDR,$@)" ];\ 653 then \ 654 $(XECHO) "... with DDR" ; \ 655 else \ 656 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ 657 $(XECHO) "... with SDRAM" ; \ 658 fi; \ 659 fi; \ 660 } 661 @[ -z "$(findstring _SDRAM,$@)" ] || \ 662 { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ 663 $(XECHO) "... with SDRAM" ; \ 664 } 665 @[ -z "$(findstring COM12,$@)" ] || \ 666 { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ 667 $(XECHO) "... with console on COM12" ; \ 668 } 669 @[ -z "$(findstring prs200,$@)" ] || \ 670 { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ 671 } 672 @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 673 674mecp5200_config: unconfig 675 @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd 676 677motionpro_config: unconfig 678 @$(MKCONFIG) motionpro ppc mpc5xxx motionpro 679 680mucmc52_config: unconfig 681 @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52 682 683munices_config: unconfig 684 @$(MKCONFIG) munices ppc mpc5xxx munices 685 686MVBC_P_config: unconfig 687 @mkdir -p $(obj)include 688 @mkdir -p $(obj)board/mvbc_p 689 @ >$(obj)include/config.h 690 @[ -z "$(findstring MVBC_P,$@)" ] || \ 691 { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } 692 @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision 693 694o2dnt_config: unconfig 695 @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt 696 697pcm030_config \ 698pcm030_LOWBOOT_config: unconfig 699 @mkdir -p $(obj)include $(obj)board/phytec/pcm030 700 @ >$(obj)include/config.h 701 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 702 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ 703 echo "... with LOWBOOT configuration" ; \ 704 } 705 @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec 706 707pf5200_config: unconfig 708 @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd 709 710PM520_config \ 711PM520_DDR_config \ 712PM520_ROMBOOT_config \ 713PM520_ROMBOOT_DDR_config: unconfig 714 @mkdir -p $(obj)include 715 @[ -z "$(findstring DDR,$@)" ] || \ 716 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 717 $(XECHO) "... DDR memory revision" ; \ 718 } 719 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 720 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 721 $(XECHO) "... booting from 8-bit flash" ; \ 722 } 723 @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 724 725smmaco4_config: unconfig 726 @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc 727 728spieval_config: unconfig 729 @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc 730 731TB5200_B_config \ 732TB5200_config: unconfig 733 @mkdir -p $(obj)include 734 @[ -z "$(findstring _B,$@)" ] || \ 735 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 736 $(XECHO) "... with MPC5200B processor" ; \ 737 } 738 @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc 739 740MINI5200_config \ 741EVAL5200_config \ 742TOP5200_config: unconfig 743 @mkdir -p $(obj)include 744 @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 745 @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk 746 747Total5100_config \ 748Total5200_config \ 749Total5200_lowboot_config \ 750Total5200_Rev2_config \ 751Total5200_Rev2_lowboot_config: unconfig 752 @mkdir -p $(obj)include 753 @mkdir -p $(obj)board/total5200 754 @[ -z "$(findstring 5100,$@)" ] || \ 755 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 756 $(XECHO) "... with MGT5100 processor" ; \ 757 } 758 @[ -z "$(findstring 5200,$@)" ] || \ 759 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 760 $(XECHO) "... with MPC5200 processor" ; \ 761 } 762 @[ -n "$(findstring Rev,$@)" ] || \ 763 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ 764 $(XECHO) "... revision 1 board" ; \ 765 } 766 @[ -z "$(findstring Rev2_,$@)" ] || \ 767 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ 768 $(XECHO) "... revision 2 board" ; \ 769 } 770 @[ -z "$(findstring lowboot_,$@)" ] || \ 771 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ 772 $(XECHO) "... with lowboot configuration" ; \ 773 } 774 @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 775 776cam5200_config \ 777cam5200_niosflash_config \ 778fo300_config \ 779MiniFAP_config \ 780TQM5200S_config \ 781TQM5200S_HIGHBOOT_config \ 782TQM5200_B_config \ 783TQM5200_B_HIGHBOOT_config \ 784TQM5200_config \ 785TQM5200_STK100_config: unconfig 786 @mkdir -p $(obj)include 787 @mkdir -p $(obj)board/tqc/tqm5200 788 @[ -z "$(findstring cam5200,$@)" ] || \ 789 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ 790 echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 791 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 792 $(XECHO) "... TQM5200S on Cam5200" ; \ 793 } 794 @[ -z "$(findstring niosflash,$@)" ] || \ 795 { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ 796 $(XECHO) "... with NIOS flash driver" ; \ 797 } 798 @[ -z "$(findstring fo300,$@)" ] || \ 799 { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ 800 $(XECHO) "... TQM5200 on FO300" ; \ 801 } 802 @[ -z "$(findstring MiniFAP,$@)" ] || \ 803 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ 804 $(XECHO) "... TQM5200_AC on MiniFAP" ; \ 805 } 806 @[ -z "$(findstring STK100,$@)" ] || \ 807 { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ 808 $(XECHO) "... on a STK52XX.100 base board" ; \ 809 } 810 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 811 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 812 } 813 @[ -z "$(findstring TQM5200S,$@)" ] || \ 814 { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 815 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 816 } 817 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 818 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ 819 } 820 @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc 821 822uc101_config: unconfig 823 @$(MKCONFIG) uc101 ppc mpc5xxx uc101 824 825v38b_config: unconfig 826 @$(MKCONFIG) -a v38b ppc mpc5xxx v38b 827 828######################################################################### 829## MPC512x Systems 830######################################################################### 831 832aria_config: unconfig 833 @$(MKCONFIG) -a aria ppc mpc512x aria davedenx 834 835mecp5123_config: unconfig 836 @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd 837 838mpc5121ads_config \ 839mpc5121ads_rev2_config \ 840 : unconfig 841 @mkdir -p $(obj)include 842 @if [ "$(findstring rev2,$@)" ] ; then \ 843 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ 844 fi 845 @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale 846 847######################################################################### 848## MPC8xx Systems 849######################################################################### 850 851Adder_config \ 852Adder87x_config \ 853AdderII_config \ 854 : unconfig 855 @mkdir -p $(obj)include 856 $(if $(findstring AdderII,$@), \ 857 @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) 858 @$(MKCONFIG) -a Adder ppc mpc8xx adder 859 860AdderUSB_config: unconfig 861 @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder 862 863ADS860_config \ 864FADS823_config \ 865FADS850SAR_config \ 866MPC86xADS_config \ 867MPC885ADS_config \ 868FADS860T_config: unconfig 869 @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads 870 871AMX860_config : unconfig 872 @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel 873 874c2mon_config: unconfig 875 @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon 876 877CCM_config: unconfig 878 @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens 879 880cogent_mpc8xx_config: unconfig 881 @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent 882 883ELPT860_config: unconfig 884 @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX 885 886EP88x_config: unconfig 887 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x 888 889ESTEEM192E_config: unconfig 890 @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e 891 892ETX094_config : unconfig 893 @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 894 895FLAGADM_config: unconfig 896 @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm 897 898xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 899 900GEN860T_SC_config \ 901GEN860T_config: unconfig 902 @mkdir -p $(obj)include 903 @[ -z "$(findstring _SC,$@)" ] || \ 904 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ 905 $(XECHO) "With reduced H/W feature set (SC)..." ; \ 906 } 907 @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 908 909GENIETV_config: unconfig 910 @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv 911 912GTH_config: unconfig 913 @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth 914 915hermes_config : unconfig 916 @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes 917 918HMI10_config : unconfig 919 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 920 921IAD210_config: unconfig 922 @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens 923 924xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 925 926ICU862_100MHz_config \ 927ICU862_config: unconfig 928 @mkdir -p $(obj)include 929 @[ -z "$(findstring _100MHz,$@)" ] || \ 930 { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ 931 $(XECHO) "... with 100MHz system clock" ; \ 932 } 933 @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 934 935IP860_config : unconfig 936 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 937 938IVML24_256_config \ 939IVML24_128_config \ 940IVML24_config: unconfig 941 @mkdir -p $(obj)include 942 @[ -z "$(findstring IVML24_config,$@)" ] || \ 943 { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ 944 } 945 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 946 { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ 947 } 948 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 949 { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ 950 } 951 @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm 952 953IVMS8_256_config \ 954IVMS8_128_config \ 955IVMS8_config: unconfig 956 @mkdir -p $(obj)include 957 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 958 { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ 959 } 960 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 961 { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ 962 } 963 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 964 { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ 965 } 966 @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm 967 968kmsupx4_config: unconfig 969 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 970 971KUP4K_config : unconfig 972 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup 973 974KUP4X_config : unconfig 975 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup 976 977LANTEC_config : unconfig 978 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec 979 980lwmon_config: unconfig 981 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon 982 983MBX_config \ 984MBX860T_config: unconfig 985 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx 986 987mgsuvd_config: unconfig 988 @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile 989 990MHPC_config: unconfig 991 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec 992 993xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 994 995NETVIA_V2_config \ 996NETVIA_config: unconfig 997 @mkdir -p $(obj)include 998 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 999 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ 1000 $(XECHO) "... Version 1" ; \ 1001 } 1002 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 1003 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ 1004 $(XECHO) "... Version 2" ; \ 1005 } 1006 @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 1007 1008xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 1009 1010NETPHONE_V2_config \ 1011NETPHONE_config: unconfig 1012 @mkdir -p $(obj)include 1013 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 1014 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ 1015 } 1016 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 1017 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ 1018 } 1019 @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 1020 1021xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 1022 1023NETTA_ISDN_6412_SWAPHOOK_config \ 1024NETTA_ISDN_SWAPHOOK_config \ 1025NETTA_6412_SWAPHOOK_config \ 1026NETTA_SWAPHOOK_config \ 1027NETTA_ISDN_6412_config \ 1028NETTA_ISDN_config \ 1029NETTA_6412_config \ 1030NETTA_config: unconfig 1031 @mkdir -p $(obj)include 1032 @[ -z "$(findstring ISDN_,$@)" ] || \ 1033 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ 1034 } 1035 @[ -n "$(findstring ISDN_,$@)" ] || \ 1036 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ 1037 } 1038 @[ -z "$(findstring 6412_,$@)" ] || \ 1039 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ 1040 } 1041 @[ -n "$(findstring 6412_,$@)" ] || \ 1042 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ 1043 } 1044 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 1045 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ 1046 } 1047 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 1048 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ 1049 } 1050 @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta 1051 1052xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 1053 1054NETTA2_V2_config \ 1055NETTA2_config: unconfig 1056 @mkdir -p $(obj)include 1057 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 1058 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ 1059 } 1060 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 1061 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ 1062 } 1063 @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 1064 1065NC650_Rev1_config \ 1066NC650_Rev2_config \ 1067CP850_config: unconfig 1068 @mkdir -p $(obj)include 1069 @[ -z "$(findstring CP850,$@)" ] || \ 1070 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ 1071 echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1072 } 1073 @[ -z "$(findstring Rev1,$@)" ] || \ 1074 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ 1075 } 1076 @[ -z "$(findstring Rev2,$@)" ] || \ 1077 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1078 } 1079 @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 1080 1081NX823_config: unconfig 1082 @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 1083 1084pcu_e_config: unconfig 1085 @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens 1086 1087QS850_config: unconfig 1088 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1089 1090QS823_config: unconfig 1091 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1092 1093QS860T_config: unconfig 1094 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc 1095 1096quantum_config: unconfig 1097 @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum 1098 1099R360MPI_config: unconfig 1100 @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi 1101 1102RBC823_config: unconfig 1103 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 1104 1105RPXClassic_config: unconfig 1106 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic 1107 1108RPXlite_config: unconfig 1109 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite 1110 1111RPXlite_DW_64_config \ 1112RPXlite_DW_LCD_config \ 1113RPXlite_DW_64_LCD_config \ 1114RPXlite_DW_NVRAM_config \ 1115RPXlite_DW_NVRAM_64_config \ 1116RPXlite_DW_NVRAM_LCD_config \ 1117RPXlite_DW_NVRAM_64_LCD_config \ 1118RPXlite_DW_config: unconfig 1119 @mkdir -p $(obj)include 1120 @[ -z "$(findstring _64,$@)" ] || \ 1121 { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ 1122 $(XECHO) "... with 64MHz system clock ..."; \ 1123 } 1124 @[ -z "$(findstring _LCD,$@)" ] || \ 1125 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1126 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1127 $(XECHO) "... with LCD display ..."; \ 1128 } 1129 @[ -z "$(findstring _NVRAM,$@)" ] || \ 1130 { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ 1131 $(XECHO) "... with ENV in NVRAM ..."; \ 1132 } 1133 @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw 1134 1135rmu_config: unconfig 1136 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu 1137 1138RRvision_config: unconfig 1139 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision 1140 1141RRvision_LCD_config: unconfig 1142 @mkdir -p $(obj)include 1143 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1144 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1145 @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision 1146 1147SM850_config : unconfig 1148 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 1149 1150spc1920_config: unconfig 1151 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 1152 1153SPD823TS_config: unconfig 1154 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx 1155 1156stxxtc_config: unconfig 1157 @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx 1158 1159svm_sc8xx_config: unconfig 1160 @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx 1161 1162SXNI855T_config: unconfig 1163 @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet 1164 1165# EMK MPC8xx based modules 1166TOP860_config: unconfig 1167 @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk 1168 1169# Play some tricks for configuration selection 1170# Only 855 and 860 boards may come with FEC 1171# and only 823 boards may have LCD support 1172xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 1173 1174FPS850L_config \ 1175FPS860L_config \ 1176NSCU_config \ 1177TQM823L_config \ 1178TQM823L_LCD_config \ 1179TQM850L_config \ 1180TQM855L_config \ 1181TQM860L_config \ 1182TQM862L_config \ 1183TQM823M_config \ 1184TQM850M_config \ 1185TQM855M_config \ 1186TQM860M_config \ 1187TQM862M_config \ 1188TQM866M_config \ 1189TQM885D_config \ 1190TK885D_config \ 1191virtlab2_config: unconfig 1192 @mkdir -p $(obj)include 1193 @[ -z "$(findstring _LCD,$@)" ] || \ 1194 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1195 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1196 $(XECHO) "... with LCD display" ; \ 1197 } 1198 @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc 1199 1200TTTech_config: unconfig 1201 @mkdir -p $(obj)include 1202 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1203 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1204 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1205 1206uc100_config : unconfig 1207 @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 1208 1209v37_config: unconfig 1210 @mkdir -p $(obj)include 1211 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1212 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h 1213 @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 1214 1215wtk_config: unconfig 1216 @mkdir -p $(obj)include 1217 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1218 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h 1219 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1220 1221######################################################################### 1222## PPC4xx Systems 1223######################################################################### 1224xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 1225 1226acadia_config: unconfig 1227 @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc 1228 1229acadia_nand_config: unconfig 1230 @mkdir -p $(obj)include $(obj)board/amcc/acadia 1231 @mkdir -p $(obj)nand_spl/board/amcc/acadia 1232 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1233 @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc 1234 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp 1235 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1236 1237ADCIOP_config: unconfig 1238 @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd 1239 1240alpr_config: unconfig 1241 @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive 1242 1243AP1000_config:unconfig 1244 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix 1245 1246APC405_config: unconfig 1247 @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd 1248 1249AR405_config: unconfig 1250 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd 1251 1252ASH405_config: unconfig 1253 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd 1254 1255bamboo_config: unconfig 1256 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc 1257 1258bamboo_nand_config: unconfig 1259 @mkdir -p $(obj)include $(obj)board/amcc/bamboo 1260 @mkdir -p $(obj)nand_spl/board/amcc/bamboo 1261 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1262 @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc 1263 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp 1264 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1265 1266bubinga_config: unconfig 1267 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc 1268 1269CANBT_config: unconfig 1270 @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd 1271 1272# Arches, Canyonlands & Glacier use different U-Boot images 1273arches_config \ 1274canyonlands_config \ 1275glacier_config: unconfig 1276 @mkdir -p $(obj)include 1277 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1278 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1279 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1280 1281canyonlands_nand_config \ 1282glacier_nand_config: unconfig 1283 @mkdir -p $(obj)include $(obj)board/amcc/canyonlands 1284 @mkdir -p $(obj)nand_spl/board/amcc/canyonlands 1285 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1286 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ 1287 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1288 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1289 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp 1290 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1291 1292CATcenter_config \ 1293CATcenter_25_config \ 1294CATcenter_33_config: unconfig 1295 @mkdir -p $(obj)include 1296 @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h 1297 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h 1298 @[ -z "$(findstring _25,$@)" ] || \ 1299 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ 1300 $(XECHO) "SysClk = 25MHz" ; \ 1301 } 1302 @[ -z "$(findstring _33,$@)" ] || \ 1303 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ 1304 $(XECHO) "SysClk = 33MHz" ; \ 1305 } 1306 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1307 1308CMS700_config: unconfig 1309 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd 1310 1311CPCI2DP_config: unconfig 1312 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd 1313 1314CPCI405_config \ 1315CPCI4052_config \ 1316CPCI405DT_config \ 1317CPCI405AB_config: unconfig 1318 @mkdir -p $(obj)board/esd/cpci405 1319 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1320 1321CPCIISER4_config: unconfig 1322 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd 1323 1324CRAYL1_config: unconfig 1325 @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray 1326 1327csb272_config: unconfig 1328 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 1329 1330csb472_config: unconfig 1331 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 1332 1333DASA_SIM_config: unconfig 1334 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd 1335 1336dlvision_config: unconfig 1337 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys 1338 1339DP405_config: unconfig 1340 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd 1341 1342DU405_config: unconfig 1343 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd 1344 1345DU440_config: unconfig 1346 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd 1347 1348ebony_config: unconfig 1349 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc 1350 1351ERIC_config: unconfig 1352 @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric 1353 1354EXBITGEN_config: unconfig 1355 @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen 1356 1357fx12mm_flash_config: unconfig 1358 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1359 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1360 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1361 > $(obj)board/avnet/fx12mm/config.tmp 1362 @echo "TEXT_BASE := 0xFFCB0000" \ 1363 >> $(obj)board/avnet/fx12mm/config.tmp 1364 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1365 1366fx12mm_config: unconfig 1367 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1368 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1369 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1370 > $(obj)board/avnet/fx12mm/config.tmp 1371 @echo "TEXT_BASE := 0x03000000" \ 1372 >> $(obj)board/avnet/fx12mm/config.tmp 1373 @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet 1374 1375G2000_config: unconfig 1376 @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 1377 1378gdppc440etx_config: unconfig 1379 @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys 1380 1381hcu4_config: unconfig 1382 @mkdir -p $(obj)board/netstal/common 1383 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal 1384 1385hcu5_config: unconfig 1386 @mkdir -p $(obj)board/netstal/common 1387 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal 1388 1389HH405_config: unconfig 1390 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd 1391 1392HUB405_config: unconfig 1393 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd 1394 1395# Compact-Center(codename intip) & DevCon-Center use different U-Boot images 1396intip_config \ 1397devconcenter_config: unconfig 1398 @mkdir -p $(obj)include 1399 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1400 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1401 @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys 1402 1403JSE_config: unconfig 1404 @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse 1405 1406KAREF_config: unconfig 1407 @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst 1408 1409katmai_config: unconfig 1410 @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc 1411 1412# Kilauea & Haleakala images are identical (recognized via PVR) 1413kilauea_config \ 1414haleakala_config: unconfig 1415 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1416 1417kilauea_nand_config \ 1418haleakala_nand_config: unconfig 1419 @mkdir -p $(obj)include $(obj)board/amcc/kilauea 1420 @mkdir -p $(obj)nand_spl/board/amcc/kilauea 1421 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1422 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1423 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp 1424 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1425 1426korat_config: unconfig 1427 @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat 1428 1429luan_config: unconfig 1430 @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc 1431 1432lwmon5_config: unconfig 1433 @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 1434 1435makalu_config: unconfig 1436 @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc 1437 1438mcu25_config: unconfig 1439 @mkdir -p $(obj)board/netstal/common 1440 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal 1441 1442METROBOX_config: unconfig 1443 @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst 1444 1445MIP405_config: unconfig 1446 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl 1447 1448MIP405T_config: unconfig 1449 @mkdir -p $(obj)include 1450 @echo "#define CONFIG_MIP405T" >$(obj)include/config.h 1451 @$(XECHO) "Enable subset config for MIP405T" 1452 @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl 1453 1454ML2_config: unconfig 1455 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 1456 1457ml300_config: unconfig 1458 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx 1459 1460ml507_flash_config: unconfig 1461 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1462 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1463 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1464 > $(obj)board/xilinx/ml507/config.tmp 1465 @echo "TEXT_BASE := 0xFE360000" \ 1466 >> $(obj)board/xilinx/ml507/config.tmp 1467 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1468 1469ml507_config: unconfig 1470 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1471 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1472 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1473 > $(obj)board/xilinx/ml507/config.tmp 1474 @echo "TEXT_BASE := 0x04000000" \ 1475 >> $(obj)board/xilinx/ml507/config.tmp 1476 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1477 1478neo_config: unconfig 1479 @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys 1480 1481ocotea_config: unconfig 1482 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc 1483 1484OCRTC_config \ 1485ORSG_config: unconfig 1486 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd 1487 1488p3p440_config: unconfig 1489 @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive 1490 1491PCI405_config: unconfig 1492 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd 1493 1494pcs440ep_config: unconfig 1495 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep 1496 1497PIP405_config: unconfig 1498 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl 1499 1500PLU405_config: unconfig 1501 @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd 1502 1503PMC405_config: unconfig 1504 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd 1505 1506PMC405DE_config: unconfig 1507 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd 1508 1509PMC440_config: unconfig 1510 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd 1511 1512PPChameleonEVB_config \ 1513PPChameleonEVB_BA_25_config \ 1514PPChameleonEVB_ME_25_config \ 1515PPChameleonEVB_HI_25_config \ 1516PPChameleonEVB_BA_33_config \ 1517PPChameleonEVB_ME_33_config \ 1518PPChameleonEVB_HI_33_config: unconfig 1519 @mkdir -p $(obj)include 1520 @[ -z "$(findstring EVB_BA,$@)" ] || \ 1521 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ 1522 $(XECHO) "... BASIC model" ; \ 1523 } 1524 @[ -z "$(findstring EVB_ME,$@)" ] || \ 1525 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ 1526 $(XECHO) "... MEDIUM model" ; \ 1527 } 1528 @[ -z "$(findstring EVB_HI,$@)" ] || \ 1529 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ 1530 $(XECHO) "... HIGH-END model" ; \ 1531 } 1532 @[ -z "$(findstring _25,$@)" ] || \ 1533 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ 1534 $(XECHO) "SysClk = 25MHz" ; \ 1535 } 1536 @[ -z "$(findstring _33,$@)" ] || \ 1537 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ 1538 $(XECHO) "SysClk = 33MHz" ; \ 1539 } 1540 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1541 1542quad100hd_config: unconfig 1543 @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd 1544 1545redwood_config: unconfig 1546 @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc 1547 1548sbc405_config: unconfig 1549 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 1550 1551sc3_config:unconfig 1552 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 1553 1554sequoia_config \ 1555rainier_config: unconfig 1556 @mkdir -p $(obj)include 1557 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1558 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1559 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1560 1561sequoia_nand_config \ 1562rainier_nand_config: unconfig 1563 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1564 @mkdir -p $(obj)nand_spl/board/amcc/sequoia 1565 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1566 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1567 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1568 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1569 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1570 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1571 1572sequoia_ramboot_config \ 1573rainier_ramboot_config: unconfig 1574 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1575 @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h 1576 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1577 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1578 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1579 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1580 @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ 1581 $(obj)board/amcc/sequoia/config.tmp 1582 1583taihu_config: unconfig 1584 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc 1585 1586taishan_config: unconfig 1587 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc 1588 1589v5fx30teval_config: unconfig 1590 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1591 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1592 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1593 > $(obj)board/avnet/v5fx30teval/config.tmp 1594 @echo "TEXT_BASE := 0x03000000" \ 1595 >> $(obj)board/avnet/v5fx30teval/config.tmp 1596 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1597 1598v5fx30teval_flash_config: unconfig 1599 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1600 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1601 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1602 > $(obj)board/avnet/v5fx30teval/config.tmp 1603 @echo "TEXT_BASE := 0xFF1C0000" \ 1604 >> $(obj)board/avnet/v5fx30teval/config.tmp 1605 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1606 1607VOH405_config: unconfig 1608 @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd 1609 1610VOM405_config: unconfig 1611 @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd 1612 1613W7OLMC_config \ 1614W7OLMG_config: unconfig 1615 @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o 1616 1617# Walnut & Sycamore images are identical (recognized via PVR) 1618walnut_config \ 1619sycamore_config: unconfig 1620 @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc 1621 1622WUH405_config: unconfig 1623 @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd 1624 1625xilinx-ppc405-generic_flash_config: unconfig 1626 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1627 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1628 > $(obj)board/xilinx/ppc405-generic/config.tmp 1629 @echo "TEXT_BASE := 0xFE360000" \ 1630 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1631 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1632 1633xilinx-ppc405-generic_config: unconfig 1634 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1635 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1636 > $(obj)board/xilinx/ppc405-generic/config.tmp 1637 @echo "TEXT_BASE := 0x04000000" \ 1638 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1639 @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx 1640 1641xilinx-ppc440-generic_flash_config: unconfig 1642 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1643 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1644 > $(obj)board/xilinx/ppc440-generic/config.tmp 1645 @echo "TEXT_BASE := 0xFE360000" \ 1646 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1647 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1648 1649xilinx-ppc440-generic_config: unconfig 1650 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1651 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1652 > $(obj)board/xilinx/ppc440-generic/config.tmp 1653 @echo "TEXT_BASE := 0x04000000" \ 1654 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1655 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1656 1657XPEDITE1000_config: unconfig 1658 @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes 1659 1660yosemite_config \ 1661yellowstone_config: unconfig 1662 @mkdir -p $(obj)include 1663 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1664 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1665 @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc 1666 1667yucca_config: unconfig 1668 @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc 1669 1670zeus_config: unconfig 1671 @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus 1672 1673######################################################################### 1674## MPC8220 Systems 1675######################################################################### 1676 1677Alaska8220_config \ 1678Yukon8220_config: unconfig 1679 @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska 1680 1681sorcery_config: unconfig 1682 @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery 1683 1684######################################################################### 1685## MPC824x Systems 1686######################################################################### 1687xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1688 1689A3000_config: unconfig 1690 @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 1691 1692barco_config: unconfig 1693 @$(MKCONFIG) $(@:_config=) ppc mpc824x barco 1694 1695BMW_config: unconfig 1696 @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw 1697 1698CPC45_config \ 1699CPC45_ROMBOOT_config: unconfig 1700 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 1701 @cd $(obj)include ; \ 1702 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1703 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1704 $(XECHO) "... booting from 8-bit flash" ; \ 1705 else \ 1706 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1707 $(XECHO) "... booting from 64-bit flash" ; \ 1708 fi; \ 1709 echo "export CONFIG_BOOT_ROM" >> config.mk; 1710 1711CU824_config: unconfig 1712 @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 1713 1714debris_config: unconfig 1715 @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin 1716 1717eXalion_config: unconfig 1718 @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion 1719 1720HIDDEN_DRAGON_config: unconfig 1721 @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon 1722 1723kvme080_config: unconfig 1724 @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin 1725 1726# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as 1727# time permits. 1728#linkstation_HDLAN_config \ 1729# Remove this line when HDLAN is fixed 1730linkstation_HGLAN_config: unconfig 1731 @mkdir -p $(obj)include 1732 @case $@ in \ 1733 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ 1734 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ 1735 esac 1736 @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation 1737 1738MOUSSE_config: unconfig 1739 @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse 1740 1741MUSENKI_config: unconfig 1742 @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki 1743 1744MVBLUE_config: unconfig 1745 @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue 1746 1747OXC_config: unconfig 1748 @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc 1749 1750PN62_config: unconfig 1751 @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 1752 1753Sandpoint8240_config: unconfig 1754 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1755 1756Sandpoint8245_config: unconfig 1757 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1758 1759sbc8240_config: unconfig 1760 @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 1761 1762SL8245_config: unconfig 1763 @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 1764 1765utx8245_config: unconfig 1766 @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 1767 1768######################################################################### 1769## MPC8260 Systems 1770######################################################################### 1771 1772atc_config: unconfig 1773 @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc 1774 1775cogent_mpc8260_config: unconfig 1776 @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent 1777 1778CPU86_config \ 1779CPU86_ROMBOOT_config: unconfig 1780 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 1781 @cd $(obj)include ; \ 1782 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1783 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1784 $(XECHO) "... booting from 8-bit flash" ; \ 1785 else \ 1786 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1787 $(XECHO) "... booting from 64-bit flash" ; \ 1788 fi; \ 1789 echo "export CONFIG_BOOT_ROM" >> config.mk; 1790 1791CPU87_config \ 1792CPU87_ROMBOOT_config: unconfig 1793 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 1794 @cd $(obj)include ; \ 1795 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1796 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1797 $(XECHO) "... booting from 8-bit flash" ; \ 1798 else \ 1799 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1800 $(XECHO) "... booting from 64-bit flash" ; \ 1801 fi; \ 1802 echo "export CONFIG_BOOT_ROM" >> config.mk; 1803 1804ep8248_config \ 1805ep8248E_config : unconfig 1806 @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 1807 1808ep8260_config: unconfig 1809 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 1810 1811ep82xxm_config: unconfig 1812 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm 1813 1814gw8260_config: unconfig 1815 @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 1816 1817hymod_config: unconfig 1818 @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod 1819 1820IDS8247_config: unconfig 1821 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 1822 1823IPHASE4539_config: unconfig 1824 @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 1825 1826ISPAN_config \ 1827ISPAN_REVB_config: unconfig 1828 @mkdir -p $(obj)include 1829 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1830 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ 1831 fi 1832 @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan 1833 1834mgcoge_config : unconfig 1835 @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile 1836 1837MPC8260ADS_config \ 1838MPC8260ADS_lowboot_config \ 1839MPC8260ADS_33MHz_config \ 1840MPC8260ADS_33MHz_lowboot_config \ 1841MPC8260ADS_40MHz_config \ 1842MPC8260ADS_40MHz_lowboot_config \ 1843MPC8272ADS_config \ 1844MPC8272ADS_lowboot_config \ 1845PQ2FADS_config \ 1846PQ2FADS_lowboot_config \ 1847PQ2FADS-VR_config \ 1848PQ2FADS-VR_lowboot_config \ 1849PQ2FADS-ZU_config \ 1850PQ2FADS-ZU_lowboot_config \ 1851PQ2FADS-ZU_66MHz_config \ 1852PQ2FADS-ZU_66MHz_lowboot_config \ 1853 : unconfig 1854 @mkdir -p $(obj)include 1855 @mkdir -p $(obj)board/freescale/mpc8260ads 1856 $(if $(findstring PQ2FADS,$@), \ 1857 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ 1858 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) 1859 $(if $(findstring MHz,$@), \ 1860 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ 1861 $(if $(findstring VR,$@), \ 1862 @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) 1863 @[ -z "$(findstring lowboot_,$@)" ] || \ 1864 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ 1865 $(XECHO) "... with lowboot configuration" ; \ 1866 } 1867 @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale 1868 1869MPC8266ADS_config: unconfig 1870 @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale 1871 1872muas3001_dev_config \ 1873muas3001_config : unconfig 1874 @mkdir -p $(obj)include 1875 @mkdir -p $(obj)board/muas3001 1876 @if [ "$(findstring dev,$@)" ] ; then \ 1877 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ 1878 fi 1879 @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 1880 1881# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1882PM825_config \ 1883PM825_ROMBOOT_config \ 1884PM825_BIGFLASH_config \ 1885PM825_ROMBOOT_BIGFLASH_config \ 1886PM826_config \ 1887PM826_ROMBOOT_config \ 1888PM826_BIGFLASH_config \ 1889PM826_ROMBOOT_BIGFLASH_config: unconfig 1890 @mkdir -p $(obj)include 1891 @mkdir -p $(obj)board/pm826 1892 @if [ "$(findstring PM825_,$@)" ] ; then \ 1893 echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ 1894 else \ 1895 >$(obj)include/config.h ; \ 1896 fi 1897 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1898 $(XECHO) "... booting from 8-bit flash" ; \ 1899 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1900 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1901 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1902 $(XECHO) "... with 32 MB Flash" ; \ 1903 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1904 fi; \ 1905 else \ 1906 $(XECHO) "... booting from 64-bit flash" ; \ 1907 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1908 $(XECHO) "... with 32 MB Flash" ; \ 1909 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1910 echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ 1911 else \ 1912 echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ 1913 fi; \ 1914 fi 1915 @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 1916 1917PM828_config \ 1918PM828_PCI_config \ 1919PM828_ROMBOOT_config \ 1920PM828_ROMBOOT_PCI_config: unconfig 1921 @mkdir -p $(obj)include 1922 @mkdir -p $(obj)board/pm826 1923 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1924 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 1925 $(XECHO) "... with PCI enabled" ; \ 1926 fi 1927 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1928 $(XECHO) "... booting from 8-bit flash" ; \ 1929 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1930 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1931 fi 1932 @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 1933 1934ppmc8260_config: unconfig 1935 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 1936 1937Rattler8248_config \ 1938Rattler_config: unconfig 1939 @mkdir -p $(obj)include 1940 $(if $(findstring 8248,$@), \ 1941 @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) 1942 @$(MKCONFIG) -a Rattler ppc mpc8260 rattler 1943 1944RPXsuper_config: unconfig 1945 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper 1946 1947rsdproto_config: unconfig 1948 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto 1949 1950sacsng_config: unconfig 1951 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng 1952 1953sbc8260_config: unconfig 1954 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 1955 1956SCM_config: unconfig 1957 @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens 1958 1959TQM8255_AA_config \ 1960TQM8260_AA_config \ 1961TQM8260_AB_config \ 1962TQM8260_AC_config \ 1963TQM8260_AD_config \ 1964TQM8260_AE_config \ 1965TQM8260_AF_config \ 1966TQM8260_AG_config \ 1967TQM8260_AH_config \ 1968TQM8260_AI_config \ 1969TQM8265_AA_config: unconfig 1970 @mkdir -p $(obj)include 1971 @case "$@" in \ 1972 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1973 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1974 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1975 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1976 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1977 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1978 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1979 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1980 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1981 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1982 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1983 esac; \ 1984 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1985 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ 1986 fi; \ 1987 echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ 1988 echo "... with $${CFREQ}MHz system clock" ; \ 1989 if [ "$${CACHE}" = "yes" ] ; then \ 1990 echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1991 $(XECHO) "... with L2 Cache support" ; \ 1992 else \ 1993 echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1994 $(XECHO) "... without L2 Cache support" ; \ 1995 fi; \ 1996 if [ "$${BMODE}" = "60x" ] ; then \ 1997 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1998 $(XECHO) "... with 60x Bus Mode" ; \ 1999 else \ 2000 echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 2001 $(XECHO) "... without 60x Bus Mode" ; \ 2002 fi 2003 @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc 2004 2005TQM8272_config: unconfig 2006 @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc 2007 2008VoVPN-GW_66MHz_config \ 2009VoVPN-GW_100MHz_config: unconfig 2010 @mkdir -p $(obj)include 2011 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h 2012 @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 2013 2014ZPC1900_config: unconfig 2015 @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 2016 2017######################################################################### 2018## Coldfire 2019######################################################################### 2020 2021M5208EVBE_config : unconfig 2022 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale 2023 2024M52277EVB_config \ 2025M52277EVB_spansion_config \ 2026M52277EVB_stmicro_config : unconfig 2027 @case "$@" in \ 2028 M52277EVB_config) FLASH=SPANSION;; \ 2029 M52277EVB_spansion_config) FLASH=SPANSION;; \ 2030 M52277EVB_stmicro_config) FLASH=STMICRO;; \ 2031 esac; \ 2032 if [ "$${FLASH}" = "SPANSION" ] ; then \ 2033 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 2034 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 2035 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ 2036 $(XECHO) "... with SPANSION boot..." ; \ 2037 fi; \ 2038 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2039 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2040 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2041 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 2042 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ 2043 $(XECHO) "... with ST Micro boot..." ; \ 2044 fi 2045 @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale 2046 2047M5235EVB_config \ 2048M5235EVB_Flash16_config \ 2049M5235EVB_Flash32_config: unconfig 2050 @case "$@" in \ 2051 M5235EVB_config) FLASH=16;; \ 2052 M5235EVB_Flash16_config) FLASH=16;; \ 2053 M5235EVB_Flash32_config) FLASH=32;; \ 2054 esac; \ 2055 if [ "$${FLASH}" != "16" ] ; then \ 2056 echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ 2057 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2058 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2059 else \ 2060 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2061 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2062 fi 2063 @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale 2064 2065M5249EVB_config : unconfig 2066 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale 2067 2068M5253DEMO_config : unconfig 2069 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale 2070 2071M5253EVBE_config : unconfig 2072 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale 2073 2074cobra5272_config : unconfig 2075 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 2076 2077EB+MCF-EV123_config : unconfig 2078 @mkdir -p $(obj)include 2079 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2080 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2081 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2082 2083EB+MCF-EV123_internal_config : unconfig 2084 @mkdir -p $(obj)include 2085 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2086 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2087 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2088 2089idmr_config : unconfig 2090 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr 2091 2092M5271EVB_config : unconfig 2093 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale 2094 2095M5272C3_config : unconfig 2096 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale 2097 2098M5275EVB_config : unconfig 2099 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale 2100 2101M5282EVB_config : unconfig 2102 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale 2103 2104M53017EVB_config : unconfig 2105 @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale 2106 2107M5329AFEE_config \ 2108M5329BFEE_config : unconfig 2109 @case "$@" in \ 2110 M5329AFEE_config) NAND=0;; \ 2111 M5329BFEE_config) NAND=16;; \ 2112 esac; \ 2113 if [ "$${NAND}" != "0" ] ; then \ 2114 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2115 fi 2116 @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale 2117 2118M5373EVB_config : unconfig 2119 @case "$@" in \ 2120 M5373EVB_config) NAND=16;; \ 2121 esac; \ 2122 if [ "$${NAND}" != "0" ] ; then \ 2123 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2124 fi 2125 @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale 2126 2127M54451EVB_config \ 2128M54451EVB_stmicro_config : unconfig 2129 @case "$@" in \ 2130 M54451EVB_config) FLASH=NOR;; \ 2131 M54451EVB_stmicro_config) FLASH=STMICRO;; \ 2132 esac; \ 2133 if [ "$${FLASH}" = "NOR" ] ; then \ 2134 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2135 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2136 $(XECHO) "... with NOR boot..." ; \ 2137 fi; \ 2138 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2139 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2140 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2141 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2142 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2143 $(XECHO) "... with ST Micro boot..." ; \ 2144 fi; \ 2145 echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; 2146 @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale 2147 2148M54455EVB_config \ 2149M54455EVB_atmel_config \ 2150M54455EVB_intel_config \ 2151M54455EVB_a33_config \ 2152M54455EVB_a66_config \ 2153M54455EVB_i33_config \ 2154M54455EVB_i66_config \ 2155M54455EVB_stm33_config : unconfig 2156 @case "$@" in \ 2157 M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ 2158 M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ 2159 M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ 2160 M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ 2161 M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ 2162 M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ 2163 M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ 2164 M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ 2165 esac; \ 2166 if [ "$${FLASH}" = "INTEL" ] ; then \ 2167 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ 2168 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2169 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2170 $(XECHO) "... with INTEL boot..." ; \ 2171 fi; \ 2172 if [ "$${FLASH}" = "ATMEL" ] ; then \ 2173 echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ 2174 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2175 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2176 $(XECHO) "... with ATMEL boot..." ; \ 2177 fi; \ 2178 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2179 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2180 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2181 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2182 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2183 $(XECHO) "... with ST Micro boot..." ; \ 2184 fi; \ 2185 echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ 2186 $(XECHO) "... with $${FREQ}Hz input clock" 2187 @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale 2188 2189M5475AFE_config \ 2190M5475BFE_config \ 2191M5475CFE_config \ 2192M5475DFE_config \ 2193M5475EFE_config \ 2194M5475FFE_config \ 2195M5475GFE_config : unconfig 2196 @case "$@" in \ 2197 M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2198 M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2199 M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2200 M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2201 M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2202 M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2203 M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2204 esac; \ 2205 echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ 2206 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2207 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2208 if [ "$${RAM1}" != "0" ] ; then \ 2209 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2210 fi; \ 2211 if [ "$${CODE}" != "0" ] ; then \ 2212 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2213 fi; \ 2214 if [ "$${VID}" == "1" ] ; then \ 2215 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2216 fi; \ 2217 if [ "$${USB}" == "1" ] ; then \ 2218 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2219 fi 2220 @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale 2221 2222M5485AFE_config \ 2223M5485BFE_config \ 2224M5485CFE_config \ 2225M5485DFE_config \ 2226M5485EFE_config \ 2227M5485FFE_config \ 2228M5485GFE_config \ 2229M5485HFE_config : unconfig 2230 @case "$@" in \ 2231 M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2232 M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2233 M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2234 M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2235 M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2236 M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2237 M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2238 M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ 2239 esac; \ 2240 echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ 2241 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2242 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2243 if [ "$${RAM1}" != "0" ] ; then \ 2244 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2245 fi; \ 2246 if [ "$${CODE}" != "0" ] ; then \ 2247 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2248 fi; \ 2249 if [ "$${VID}" == "1" ] ; then \ 2250 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2251 fi; \ 2252 if [ "$${USB}" == "1" ] ; then \ 2253 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2254 fi 2255 @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale 2256 2257TASREG_config : unconfig 2258 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd 2259 2260######################################################################### 2261## MPC83xx Systems 2262######################################################################### 2263 2264kmeter1_config: unconfig 2265 @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile 2266 2267MPC8313ERDB_33_config \ 2268MPC8313ERDB_66_config \ 2269MPC8313ERDB_NAND_33_config \ 2270MPC8313ERDB_NAND_66_config: unconfig 2271 @mkdir -p $(obj)include 2272 @mkdir -p $(obj)board/freescale/mpc8313erdb 2273 @if [ "$(findstring _33_,$@)" ] ; then \ 2274 $(XECHO) -n "...33M ..." ; \ 2275 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ 2276 fi ; \ 2277 if [ "$(findstring _66_,$@)" ] ; then \ 2278 $(XECHO) -n "...66M..." ; \ 2279 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ 2280 fi ; \ 2281 if [ "$(findstring _NAND_,$@)" ] ; then \ 2282 $(XECHO) -n "...NAND..." ; \ 2283 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ 2284 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ 2285 fi ; 2286 @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale 2287 @if [ "$(findstring _NAND_,$@)" ] ; then \ 2288 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ 2289 fi ; 2290 2291MPC8315ERDB_config: unconfig 2292 @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale 2293 2294MPC8323ERDB_config: unconfig 2295 @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale 2296 2297MPC832XEMDS_config \ 2298MPC832XEMDS_HOST_33_config \ 2299MPC832XEMDS_HOST_66_config \ 2300MPC832XEMDS_SLAVE_config \ 2301MPC832XEMDS_ATM_config: unconfig 2302 @mkdir -p $(obj)include 2303 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2304 $(XECHO) -n "... PCI HOST " ; \ 2305 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2306 fi ; \ 2307 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2308 $(XECHO) "...PCI SLAVE 66M" ; \ 2309 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2310 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2311 fi ; \ 2312 if [ "$(findstring _33_,$@)" ] ; then \ 2313 $(XECHO) -n "...33M ..." ; \ 2314 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2315 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2316 fi ; \ 2317 if [ "$(findstring _66_,$@)" ] ; then \ 2318 $(XECHO) -n "...66M..." ; \ 2319 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2320 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2321 fi ; \ 2322 if [ "$(findstring _ATM_,$@)" ] ; then \ 2323 $(XECHO) -n "...ATM..." ; \ 2324 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2325 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2326 fi ; 2327 @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale 2328 2329MPC8349EMDS_config: unconfig 2330 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale 2331 2332MPC8349ITX_config \ 2333MPC8349ITX_LOWBOOT_config \ 2334MPC8349ITXGP_config: unconfig 2335 @mkdir -p $(obj)include 2336 @mkdir -p $(obj)board/freescale/mpc8349itx 2337 @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h 2338 @if [ "$(findstring GP,$@)" ] ; then \ 2339 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2340 fi 2341 @if [ "$(findstring LOWBOOT,$@)" ] ; then \ 2342 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2343 fi 2344 @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale 2345 2346MPC8360EMDS_config \ 2347MPC8360EMDS_HOST_33_config \ 2348MPC8360EMDS_HOST_66_config \ 2349MPC8360EMDS_SLAVE_config \ 2350MPC8360EMDS_ATM_config: unconfig 2351 @mkdir -p $(obj)include 2352 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2353 $(XECHO) -n "... PCI HOST " ; \ 2354 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2355 fi ; \ 2356 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2357 $(XECHO) "...PCI SLAVE 66M" ; \ 2358 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2359 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2360 fi ; \ 2361 if [ "$(findstring _33_,$@)" ] ; then \ 2362 $(XECHO) -n "...33M ..." ; \ 2363 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2364 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2365 fi ; \ 2366 if [ "$(findstring _66_,$@)" ] ; then \ 2367 $(XECHO) -n "...66M..." ; \ 2368 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2369 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2370 fi ; \ 2371 if [ "$(findstring _ATM_,$@)" ] ; then \ 2372 $(XECHO) -n "...ATM..." ; \ 2373 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2374 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2375 fi ; 2376 @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale 2377 2378MPC8360ERDK_33_config \ 2379MPC8360ERDK_66_config \ 2380MPC8360ERDK_config: unconfig 2381 @mkdir -p $(obj)include 2382 @if [ "$(findstring _33_,$@)" ] ; then \ 2383 $(XECHO) -n "... CLKIN 33MHz " ; \ 2384 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ 2385 fi ; 2386 @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale 2387 2388MPC837XEMDS_config \ 2389MPC837XEMDS_HOST_config: unconfig 2390 @mkdir -p $(obj)include 2391 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2392 $(XECHO) -n "... PCI HOST " ; \ 2393 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2394 fi ; 2395 @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale 2396 2397MPC837XERDB_config: unconfig 2398 @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale 2399 2400MVBLM7_config: unconfig 2401 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision 2402 2403sbc8349_config \ 2404sbc8349_PCI_33_config \ 2405sbc8349_PCI_66_config: unconfig 2406 @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349 2407 2408SIMPC8313_LP_config \ 2409SIMPC8313_SP_config: unconfig 2410 @mkdir -p $(obj)include 2411 @mkdir -p $(obj)board/sheldon/simpc8313 2412 @if [ "$(findstring _LP_,$@)" ] ; then \ 2413 $(XECHO) -n "...Large Page NAND..." ; \ 2414 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ 2415 fi ; \ 2416 if [ "$(findstring _SP_,$@)" ] ; then \ 2417 $(XECHO) -n "...Small Page NAND..." ; \ 2418 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ 2419 fi ; 2420 @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon 2421 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 2422 2423TQM834x_config: unconfig 2424 @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc 2425 2426vme8349_config: unconfig 2427 @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd 2428 2429######################################################################### 2430## MPC85xx Systems 2431######################################################################### 2432 2433ATUM8548_config: unconfig 2434 @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 2435 2436MPC8536DS_NAND_config \ 2437MPC8536DS_SDCARD_config \ 2438MPC8536DS_SPIFLASH_config \ 2439MPC8536DS_36BIT_config \ 2440MPC8536DS_config: unconfig 2441 @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale 2442 2443MPC8540ADS_config: unconfig 2444 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale 2445 2446MPC8540EVAL_config \ 2447MPC8540EVAL_33_config \ 2448MPC8540EVAL_66_config \ 2449MPC8540EVAL_33_slave_config \ 2450MPC8540EVAL_66_slave_config: unconfig 2451 @mkdir -p $(obj)include 2452 @if [ "$(findstring _33_,$@)" ] ; then \ 2453 $(XECHO) "... 33 MHz PCI" ; \ 2454 else \ 2455 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ 2456 $(XECHO) "... 66 MHz PCI" ; \ 2457 fi ; \ 2458 if [ "$(findstring _slave_,$@)" ] ; then \ 2459 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ 2460 $(XECHO) " slave" ; \ 2461 else \ 2462 $(XECHO) " host" ; \ 2463 fi 2464 @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval 2465 2466MPC8560ADS_config: unconfig 2467 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale 2468 2469MPC8541CDS_legacy_config \ 2470MPC8541CDS_config: unconfig 2471 @mkdir -p $(obj)include 2472 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2473 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2474 $(XECHO) "... legacy" ; \ 2475 fi 2476 @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale 2477 2478MPC8544DS_config: unconfig 2479 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale 2480 2481MPC8548CDS_legacy_config \ 2482MPC8548CDS_config: unconfig 2483 @mkdir -p $(obj)include 2484 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2485 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2486 $(XECHO) "... legacy" ; \ 2487 fi 2488 @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale 2489 2490MPC8555CDS_legacy_config \ 2491MPC8555CDS_config: unconfig 2492 @mkdir -p $(obj)include 2493 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2494 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2495 $(XECHO) "... legacy" ; \ 2496 fi 2497 @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale 2498 2499MPC8568MDS_config: unconfig 2500 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale 2501 2502MPC8569MDS_config: unconfig 2503 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale 2504 2505MPC8572DS_36BIT_config \ 2506MPC8572DS_config: unconfig 2507 @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale 2508 2509P2020DS_36BIT_config \ 2510P2020DS_config: unconfig 2511 @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale 2512 2513P1011RDB_config \ 2514P1020RDB_config \ 2515P2010RDB_config \ 2516P2020RDB_config: unconfig 2517 @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale 2518 2519PM854_config: unconfig 2520 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 2521 2522PM856_config: unconfig 2523 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 2524 2525sbc8540_config \ 2526sbc8540_33_config \ 2527sbc8540_66_config: unconfig 2528 @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560 2529 2530sbc8548_config \ 2531sbc8548_PCI_33_config \ 2532sbc8548_PCI_66_config \ 2533sbc8548_PCI_33_PCIE_config \ 2534sbc8548_PCI_66_PCIE_config: unconfig 2535 @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548 2536 2537sbc8560_config \ 2538sbc8560_33_config \ 2539sbc8560_66_config: unconfig 2540 @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560 2541 2542socrates_config: unconfig 2543 @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates 2544 2545stxgp3_config: unconfig 2546 @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx 2547 2548stxssa_config \ 2549stxssa_4M_config: unconfig 2550 @mkdir -p $(obj)include 2551 @if [ "$(findstring _4M_,$@)" ] ; then \ 2552 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ 2553 $(XECHO) "... with 4 MiB flash memory" ; \ 2554 fi 2555 @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx 2556 2557TQM8540_config \ 2558TQM8541_config \ 2559TQM8548_config \ 2560TQM8548_AG_config \ 2561TQM8548_BE_config \ 2562TQM8555_config \ 2563TQM8560_config: unconfig 2564 @mkdir -p $(obj)include 2565 @BTYPE=$(@:_config=); \ 2566 CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ 2567 $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ 2568 echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ 2569 echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ 2570 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ 2571 echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; 2572 @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc 2573 @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; 2574 2575XPEDITE5200_config: unconfig 2576 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes 2577 2578XPEDITE5370_config: unconfig 2579 @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes 2580 2581######################################################################### 2582## MPC86xx Systems 2583######################################################################### 2584 2585MPC8610HPCD_config: unconfig 2586 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale 2587 2588MPC8641HPCN_36BIT_config \ 2589MPC8641HPCN_config: unconfig 2590 @mkdir -p $(obj)include 2591 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2592 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2593 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2594 fi 2595 @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale 2596 2597sbc8641d_config: unconfig 2598 @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d 2599 2600XPEDITE5170_config: unconfig 2601 @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes 2602 2603######################################################################### 2604## 74xx/7xx Systems 2605######################################################################### 2606 2607AmigaOneG3SE_config: unconfig 2608 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 2609 2610BAB7xx_config: unconfig 2611 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec 2612 2613CPCI750_config: unconfig 2614 @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd 2615 2616DB64360_config: unconfig 2617 @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell 2618 2619DB64460_config: unconfig 2620 @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell 2621 2622ELPPC_config: unconfig 2623 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec 2624 2625EVB64260_config \ 2626EVB64260_750CX_config: unconfig 2627 @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 2628 2629mpc7448hpc2_config: unconfig 2630 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale 2631 2632P3G4_config: unconfig 2633 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2634 2635p3m750_config \ 2636p3m7448_config: unconfig 2637 @mkdir -p $(obj)include 2638 @if [ "$(findstring 750_,$@)" ] ; then \ 2639 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ 2640 else \ 2641 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ 2642 fi 2643 @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive 2644 2645PCIPPC2_config \ 2646PCIPPC6_config: unconfig 2647 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 2648 2649ppmc7xx_config: unconfig 2650 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx 2651 2652ZUMA_config: unconfig 2653 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2654 2655#======================================================================== 2656# ARM 2657#======================================================================== 2658######################################################################### 2659## StrongARM Systems 2660######################################################################### 2661 2662assabet_config : unconfig 2663 @$(MKCONFIG) $(@:_config=) arm sa1100 assabet 2664 2665dnp1110_config : unconfig 2666 @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 2667 2668gcplus_config : unconfig 2669 @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus 2670 2671lart_config : unconfig 2672 @$(MKCONFIG) $(@:_config=) arm sa1100 lart 2673 2674shannon_config : unconfig 2675 @$(MKCONFIG) $(@:_config=) arm sa1100 shannon 2676 2677######################################################################### 2678## ARM92xT Systems 2679######################################################################### 2680 2681######################################################################### 2682## Atmel AT91RM9200 Systems 2683######################################################################### 2684 2685at91rm9200dk_config : unconfig 2686 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 2687 2688at91rm9200ek_config : unconfig 2689 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200 2690 2691cmc_pu2_config : unconfig 2692 @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 2693 2694CPUAT91_RAM_config \ 2695CPUAT91_config : unconfig 2696 @mkdir -p $(obj)include 2697 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2698 @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 2699 2700csb637_config : unconfig 2701 @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 2702 2703kb9202_config : unconfig 2704 @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 2705 2706m501sk_config : unconfig 2707 @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 2708 2709mp2usb_config : unconfig 2710 @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 2711 2712######################################################################### 2713## Atmel ARM926EJ-S Systems 2714######################################################################### 2715 2716afeb9260_config: unconfig 2717 @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 2718 2719at91cap9adk_config : unconfig 2720 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 2721 2722at91sam9260ek_nandflash_config \ 2723at91sam9260ek_dataflash_cs0_config \ 2724at91sam9260ek_dataflash_cs1_config \ 2725at91sam9260ek_config \ 2726at91sam9g20ek_nandflash_config \ 2727at91sam9g20ek_dataflash_cs0_config \ 2728at91sam9g20ek_dataflash_cs1_config \ 2729at91sam9g20ek_config : unconfig 2730 @mkdir -p $(obj)include 2731 @if [ "$(findstring 9g20,$@)" ] ; then \ 2732 echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ 2733 $(XECHO) "... 9G20 Variant" ; \ 2734 else \ 2735 echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ 2736 fi; 2737 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2738 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2739 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2740 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2741 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2742 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2743 else \ 2744 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2745 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2746 fi; 2747 @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2748 2749at91sam9xeek_nandflash_config \ 2750at91sam9xeek_dataflash_cs0_config \ 2751at91sam9xeek_dataflash_cs1_config \ 2752at91sam9xeek_config : unconfig 2753 @mkdir -p $(obj)include 2754 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2755 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2756 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2757 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2758 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2759 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2760 else \ 2761 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2762 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2763 fi; 2764 @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2765 2766at91sam9261ek_nandflash_config \ 2767at91sam9261ek_dataflash_cs0_config \ 2768at91sam9261ek_dataflash_cs3_config \ 2769at91sam9261ek_config \ 2770at91sam9g10ek_nandflash_config \ 2771at91sam9g10ek_dataflash_cs0_config \ 2772at91sam9g10ek_dataflash_cs3_config \ 2773at91sam9g10ek_config : unconfig 2774 @mkdir -p $(obj)include 2775 @if [ "$(findstring 9g10,$@)" ] ; then \ 2776 echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ 2777 $(XECHO) "... 9G10 Variant" ; \ 2778 else \ 2779 echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ 2780 fi; 2781 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2782 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2783 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2784 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2785 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ 2786 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ 2787 else \ 2788 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2789 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2790 fi; 2791 @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 2792 2793at91sam9263ek_norflash_config \ 2794at91sam9263ek_norflash_boot_config \ 2795at91sam9263ek_nandflash_config \ 2796at91sam9263ek_dataflash_config \ 2797at91sam9263ek_dataflash_cs0_config \ 2798at91sam9263ek_config : unconfig 2799 @mkdir -p $(obj)include 2800 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2801 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2802 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2803 elif [ "$(findstring norflash,$@)" ] ; then \ 2804 echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ 2805 $(XECHO) "... with environment variable in NOR FLASH" ; \ 2806 else \ 2807 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2808 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2809 fi; 2810 @if [ "$(findstring norflash_boot,$@)" ] ; then \ 2811 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ 2812 $(XECHO) "... and boot from NOR FLASH" ; \ 2813 fi; 2814 @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 2815 2816at91sam9rlek_nandflash_config \ 2817at91sam9rlek_dataflash_config \ 2818at91sam9rlek_dataflash_cs0_config \ 2819at91sam9rlek_config : unconfig 2820 @mkdir -p $(obj)include 2821 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2822 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2823 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2824 else \ 2825 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2826 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2827 fi; 2828 @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 2829 2830CPU9G20_128M_config \ 2831CPU9G20_config \ 2832CPU9260_128M_config \ 2833CPU9260_config : unconfig 2834 @mkdir -p $(obj)include 2835 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2836 @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91 2837 2838meesc_config : unconfig 2839 @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 2840 2841pm9261_config : unconfig 2842 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 2843 2844at91sam9m10g45ek_nandflash_config \ 2845at91sam9m10g45ek_dataflash_config \ 2846at91sam9m10g45ek_dataflash_cs0_config \ 2847at91sam9m10g45ek_config \ 2848at91sam9g45ekes_nandflash_config \ 2849at91sam9g45ekes_dataflash_config \ 2850at91sam9g45ekes_dataflash_cs0_config \ 2851at91sam9g45ekes_config : unconfig 2852 @mkdir -p $(obj)include 2853 @if [ "$(findstring 9m10,$@)" ] ; then \ 2854 echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ 2855 $(XECHO) "... 9M10G45 Variant" ; \ 2856 else \ 2857 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ 2858 fi; 2859 2860 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2861 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2862 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2863 else \ 2864 echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ 2865 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2866 fi; 2867 @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 2868 2869pm9263_config : unconfig 2870 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 2871 2872SBC35_A9G20_NANDFLASH_config \ 2873SBC35_A9G20_EEPROM_config \ 2874SBC35_A9G20_config : unconfig 2875 @mkdir -p $(obj)include 2876 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2877 @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 2878 2879TNY_A9G20_NANDFLASH_config \ 2880TNY_A9G20_EEPROM_config \ 2881TNY_A9G20_config \ 2882TNY_A9260_NANDFLASH_config \ 2883TNY_A9260_EEPROM_config \ 2884TNY_A9260_config : unconfig 2885 @mkdir -p $(obj)include 2886 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2887 @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 2888 2889######################################################################## 2890## ARM Integrator boards - see doc/README-integrator for more info. 2891integratorap_config \ 2892ap_config \ 2893ap966_config \ 2894ap922_config \ 2895ap922_XA10_config \ 2896ap7_config \ 2897ap720t_config \ 2898ap920t_config \ 2899ap926ejs_config \ 2900ap946es_config: unconfig 2901 @board/armltd/integrator/split_by_variant.sh ap $@ 2902 2903integratorcp_config \ 2904cp_config \ 2905cp920t_config \ 2906cp926ejs_config \ 2907cp946es_config \ 2908cp1136_config \ 2909cp966_config \ 2910cp922_config \ 2911cp922_XA10_config \ 2912cp1026_config: unconfig 2913 @board/armltd/integrator/split_by_variant.sh cp $@ 2914 2915davinci_dvevm_config : unconfig 2916 @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci 2917 2918davinci_schmoogie_config : unconfig 2919 @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci 2920 2921davinci_sffsdr_config : unconfig 2922 @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci 2923 2924davinci_sonata_config : unconfig 2925 @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci 2926 2927davinci_dm355evm_config : unconfig 2928 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci 2929 2930davinci_dm365evm_config : unconfig 2931 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci 2932 2933imx27lite_config: unconfig 2934 @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 2935 2936lpd7a400_config \ 2937lpd7a404_config: unconfig 2938 @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x 2939 2940mv88f6281gtw_ge_config: unconfig 2941 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2942 2943mx1ads_config : unconfig 2944 @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx 2945 2946mx1fs2_config : unconfig 2947 @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx 2948 2949netstar_config: unconfig 2950 @$(MKCONFIG) $(@:_config=) arm arm925t netstar 2951 2952nhk8815_config \ 2953nhk8815_onenand_config: unconfig 2954 @mkdir -p $(obj)include 2955 @ > $(obj)include/config.h 2956 @if [ "$(findstring _onenand, $@)" ] ; then \ 2957 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ 2958 $(XECHO) "... configured to boot from OneNand Flash"; \ 2959 else \ 2960 $(XECHO) "... configured to boot from Nand Flash"; \ 2961 fi 2962 @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik 2963 2964omap1510inn_config : unconfig 2965 @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti 2966 2967xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 2968 2969omap1610inn_config \ 2970omap1610inn_cs0boot_config \ 2971omap1610inn_cs3boot_config \ 2972omap1610inn_cs_autoboot_config \ 2973omap1610h2_config \ 2974omap1610h2_cs0boot_config \ 2975omap1610h2_cs3boot_config \ 2976omap1610h2_cs_autoboot_config: unconfig 2977 @mkdir -p $(obj)include 2978 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2979 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ 2980 $(XECHO) "... configured for CS0 boot"; \ 2981 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 2982 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ 2983 $(XECHO) "... configured for CS_AUTO boot"; \ 2984 else \ 2985 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2986 $(XECHO) "... configured for CS3 boot"; \ 2987 fi; 2988 @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap 2989 2990omap5912osk_config : unconfig 2991 @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap 2992 2993openrd_base_config: unconfig 2994 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2995 2996xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 2997 2998omap730p2_config \ 2999omap730p2_cs0boot_config \ 3000omap730p2_cs3boot_config : unconfig 3001 @mkdir -p $(obj)include 3002 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 3003 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ 3004 $(XECHO) "... configured for CS0 boot"; \ 3005 else \ 3006 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 3007 $(XECHO) "... configured for CS3 boot"; \ 3008 fi; 3009 @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap 3010 3011rd6281a_config: unconfig 3012 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 3013 3014sbc2410x_config: unconfig 3015 @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 3016 3017scb9328_config : unconfig 3018 @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx 3019 3020sheevaplug_config: unconfig 3021 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 3022 3023smdk2400_config : unconfig 3024 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 3025 3026smdk2410_config : unconfig 3027 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 3028 3029SX1_stdout_serial_config \ 3030SX1_config: unconfig 3031 @mkdir -p $(obj)include 3032 @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ 3033 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 3034 $(XECHO) "... configured for stdout serial"; \ 3035 else \ 3036 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 3037 $(XECHO) "... configured for stdout usbtty"; \ 3038 fi; 3039 @$(MKCONFIG) SX1 arm arm925t sx1 3040 3041# TRAB default configuration: 8 MB Flash, 32 MB RAM 3042xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 3043 3044trab_config \ 3045trab_bigram_config \ 3046trab_bigflash_config \ 3047trab_old_config: unconfig 3048 @mkdir -p $(obj)include 3049 @mkdir -p $(obj)board/trab 3050 @[ -z "$(findstring _bigram,$@)" ] || \ 3051 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 3052 echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ 3053 $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ 3054 } 3055 @[ -z "$(findstring _bigflash,$@)" ] || \ 3056 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ 3057 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 3058 $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ 3059 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 3060 } 3061 @[ -z "$(findstring _old,$@)" ] || \ 3062 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 3063 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 3064 $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ 3065 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 3066 } 3067 @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 3068 3069VCMA9_config : unconfig 3070 @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 3071 3072######################################################################### 3073# ARM supplied Versatile development boards 3074######################################################################### 3075 3076cm4008_config : unconfig 3077 @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 3078 3079cm41xx_config : unconfig 3080 @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 3081 3082versatile_config \ 3083versatileab_config \ 3084versatilepb_config : unconfig 3085 @board/armltd/versatile/split_by_variant.sh $@ 3086 3087voiceblue_config: unconfig 3088 @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue 3089 3090######################################################################### 3091## S3C44B0 Systems 3092######################################################################### 3093 3094B2_config : unconfig 3095 @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave 3096 3097######################################################################### 3098## ARM720T Systems 3099######################################################################### 3100 3101armadillo_config: unconfig 3102 @$(MKCONFIG) $(@:_config=) arm arm720t armadillo 3103 3104ep7312_config : unconfig 3105 @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 3106 3107impa7_config : unconfig 3108 @$(MKCONFIG) $(@:_config=) arm arm720t impa7 3109 3110modnet50_config : unconfig 3111 @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 3112 3113evb4510_config : unconfig 3114 @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b 3115 3116lpc2292sodimm_config: unconfig 3117 @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 3118 3119SMN42_config : unconfig 3120 @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 3121 3122######################################################################### 3123## ARM CORTEX Systems 3124######################################################################### 3125 3126devkit8000_config : unconfig 3127 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3 3128 3129omap3_beagle_config : unconfig 3130 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3 3131 3132omap3_overo_config : unconfig 3133 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3 3134 3135omap3_evm_config : unconfig 3136 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3 3137 3138omap3_pandora_config : unconfig 3139 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3 3140 3141omap3_zoom1_config : unconfig 3142 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3 3143 3144omap3_zoom2_config : unconfig 3145 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 3146 3147######################################################################### 3148## XScale Systems 3149######################################################################### 3150 3151actux1_config : unconfig 3152 @$(MKCONFIG) $(@:_config=) arm ixp actux1 3153 3154actux2_config : unconfig 3155 @$(MKCONFIG) $(@:_config=) arm ixp actux2 3156 3157actux3_config : unconfig 3158 @$(MKCONFIG) $(@:_config=) arm ixp actux3 3159 3160actux4_config : unconfig 3161 @$(MKCONFIG) $(@:_config=) arm ixp actux4 3162 3163cerf250_config : unconfig 3164 @$(MKCONFIG) $(@:_config=) arm pxa cerf250 3165 3166cradle_config : unconfig 3167 @$(MKCONFIG) $(@:_config=) arm pxa cradle 3168 3169csb226_config : unconfig 3170 @$(MKCONFIG) $(@:_config=) arm pxa csb226 3171 3172delta_config : unconfig 3173 @$(MKCONFIG) $(@:_config=) arm pxa delta 3174 3175innokom_config : unconfig 3176 @$(MKCONFIG) $(@:_config=) arm pxa innokom 3177 3178ixdp425_config : unconfig 3179 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3180 3181ixdpg425_config : unconfig 3182 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3183 3184lubbock_config : unconfig 3185 @$(MKCONFIG) $(@:_config=) arm pxa lubbock 3186 3187pleb2_config : unconfig 3188 @$(MKCONFIG) $(@:_config=) arm pxa pleb2 3189 3190logodl_config : unconfig 3191 @$(MKCONFIG) $(@:_config=) arm pxa logodl 3192 3193pdnb3_config \ 3194scpu_config: unconfig 3195 @mkdir -p $(obj)include 3196 @if [ "$(findstring scpu_,$@)" ] ; then \ 3197 echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ 3198 $(XECHO) "... on SCPU board variant" ; \ 3199 fi 3200 @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive 3201 3202pxa255_idp_config: unconfig 3203 @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp 3204 3205polaris_config \ 3206trizepsiv_config : unconfig 3207 @mkdir -p $(obj)include 3208 @if [ "$(findstring polaris,$@)" ] ; then \ 3209 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ 3210 fi; 3211 @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv 3212 3213wepep250_config : unconfig 3214 @$(MKCONFIG) $(@:_config=) arm pxa wepep250 3215 3216xaeniax_config : unconfig 3217 @$(MKCONFIG) $(@:_config=) arm pxa xaeniax 3218 3219xm250_config : unconfig 3220 @$(MKCONFIG) $(@:_config=) arm pxa xm250 3221 3222xsengine_config : unconfig 3223 @$(MKCONFIG) $(@:_config=) arm pxa xsengine 3224 3225zylonite_config : 3226 @$(MKCONFIG) $(@:_config=) arm pxa zylonite 3227 3228######################################################################### 3229## ARM1136 Systems 3230######################################################################### 3231 3232apollon_config : unconfig 3233 @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h 3234 @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx 3235 @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk 3236 3237imx31_litekit_config : unconfig 3238 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31 3239 3240imx31_phycore_eet_config \ 3241imx31_phycore_config : unconfig 3242 @mkdir -p $(obj)include 3243 @if [ -n "$(findstring _eet_,$@)" ]; then \ 3244 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ 3245 fi 3246 @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 3247 3248mx31ads_config : unconfig 3249 @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 3250 3251mx31pdk_config \ 3252mx31pdk_nand_config : unconfig 3253 @mkdir -p $(obj)include 3254 @if [ -n "$(findstring _nand_,$@)" ]; then \ 3255 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ 3256 else \ 3257 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ 3258 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ 3259 fi 3260 @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 3261 3262omap2420h4_config : unconfig 3263 @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx 3264 3265qong_config : unconfig 3266 @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 3267 3268######################################################################### 3269## ARM1176 Systems 3270######################################################################### 3271smdk6400_noUSB_config \ 3272smdk6400_config : unconfig 3273 @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 3274 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 3275 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 3276 @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ 3277 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3278 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3279 else \ 3280 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3281 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3282 fi 3283 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 3284 3285#======================================================================== 3286# i386 3287#======================================================================== 3288######################################################################### 3289## AMD SC520 CDP 3290######################################################################### 3291eNET_config : unconfig 3292 @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 3293 3294sc520_cdp_config : unconfig 3295 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 3296 3297sc520_spunk_config : unconfig 3298 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3299 3300sc520_spunk_rel_config : unconfig 3301 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3302 3303#======================================================================== 3304# MIPS 3305#======================================================================== 3306######################################################################### 3307## MIPS32 4Kc 3308######################################################################### 3309 3310xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 3311 3312incaip_100MHz_config \ 3313incaip_133MHz_config \ 3314incaip_150MHz_config \ 3315incaip_config: unconfig 3316 @mkdir -p $(obj)include 3317 @[ -z "$(findstring _100MHz,$@)" ] || \ 3318 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ 3319 $(XECHO) "... with 100MHz system clock" ; \ 3320 } 3321 @[ -z "$(findstring _133MHz,$@)" ] || \ 3322 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ 3323 $(XECHO) "... with 133MHz system clock" ; \ 3324 } 3325 @[ -z "$(findstring _150MHz,$@)" ] || \ 3326 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ 3327 $(XECHO) "... with 150MHz system clock" ; \ 3328 } 3329 @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip 3330 3331tb0229_config: unconfig 3332 @$(MKCONFIG) $(@:_config=) mips mips tb0229 3333 3334vct_premium_config \ 3335vct_premium_small_config \ 3336vct_premium_onenand_config \ 3337vct_premium_onenand_small_config \ 3338vct_platinum_config \ 3339vct_platinum_small_config \ 3340vct_platinum_onenand_config \ 3341vct_platinum_onenand_small_config \ 3342vct_platinumavc_config \ 3343vct_platinumavc_small_config \ 3344vct_platinumavc_onenand_config \ 3345vct_platinumavc_onenand_small_config: unconfig 3346 @mkdir -p $(obj)include 3347 @if [ "$(findstring _premium,$@)" ] ; then \ 3348 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ 3349 $(XECHO) "... on Premium board variant" ; \ 3350 fi 3351 @if [ "$(findstring _platinum_,$@)" ] ; then \ 3352 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ 3353 $(XECHO) "... on Platinum board variant" ; \ 3354 fi 3355 @if [ "$(findstring _platinumavc,$@)" ] ; then \ 3356 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ 3357 $(XECHO) "... on PlatinumAVC board variant" ; \ 3358 fi 3359 @if [ "$(findstring _onenand,$@)" ] ; then \ 3360 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ 3361 $(XECHO) "... on OneNAND board variant" ; \ 3362 fi 3363 @if [ "$(findstring _small,$@)" ] ; then \ 3364 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ 3365 $(XECHO) "... stripped down image variant" ; \ 3366 fi 3367 @$(MKCONFIG) -a vct mips mips vct micronas 3368 3369######################################################################### 3370## MIPS32 AU1X00 3371######################################################################### 3372 3373dbau1000_config : unconfig 3374 @mkdir -p $(obj)include 3375 @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h 3376 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3377 3378dbau1100_config : unconfig 3379 @mkdir -p $(obj)include 3380 @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h 3381 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3382 3383dbau1500_config : unconfig 3384 @mkdir -p $(obj)include 3385 @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h 3386 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3387 3388dbau1550_config : unconfig 3389 @mkdir -p $(obj)include 3390 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3391 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3392 3393dbau1550_el_config : unconfig 3394 @mkdir -p $(obj)include 3395 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3396 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3397 3398gth2_config : unconfig 3399 @mkdir -p $(obj)include 3400 @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h 3401 @$(MKCONFIG) -a gth2 mips mips gth2 3402 3403pb1000_config : unconfig 3404 @mkdir -p $(obj)include 3405 @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h 3406 @$(MKCONFIG) -a pb1x00 mips mips pb1x00 3407 3408qemu_mips_config : unconfig 3409 @mkdir -p $(obj)include 3410 @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h 3411 @$(MKCONFIG) -a qemu-mips mips mips qemu-mips 3412 3413######################################################################### 3414## MIPS64 5Kc 3415######################################################################### 3416 3417purple_config : unconfig 3418 @$(MKCONFIG) $(@:_config=) mips mips purple 3419 3420#======================================================================== 3421# Nios 3422#======================================================================== 3423######################################################################### 3424## Nios32 3425######################################################################### 3426 3427ADNPESC1_DNPEVA2_base_32_config \ 3428ADNPESC1_base_32_config \ 3429ADNPESC1_config: unconfig 3430 @mkdir -p $(obj)include 3431 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 3432 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ 3433 $(XECHO) "... DNP/EVA2 configuration" ; \ 3434 } 3435 @[ -z "$(findstring _base_32,$@)" ] || \ 3436 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3437 $(XECHO) "... NIOS 'base_32' configuration" ; \ 3438 } 3439 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 3440 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 3441 $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ 3442 } 3443 @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv 3444 3445DK1C20_safe_32_config \ 3446DK1C20_standard_32_config \ 3447DK1C20_config: unconfig 3448 @mkdir -p $(obj)include 3449 @[ -z "$(findstring _safe_32,$@)" ] || \ 3450 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3451 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3452 } 3453 @[ -z "$(findstring _standard_32,$@)" ] || \ 3454 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3455 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3456 } 3457 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 3458 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3459 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3460 } 3461 @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera 3462 3463DK1S10_safe_32_config \ 3464DK1S10_standard_32_config \ 3465DK1S10_mtx_ldk_20_config \ 3466DK1S10_config: unconfig 3467 @mkdir -p $(obj)include 3468 @[ -z "$(findstring _safe_32,$@)" ] || \ 3469 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 3470 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 3471 } 3472 @[ -z "$(findstring _standard_32,$@)" ] || \ 3473 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3474 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 3475 } 3476 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 3477 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ 3478 $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ 3479 } 3480 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 3481 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 3482 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 3483 } 3484 @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera 3485 3486######################################################################### 3487## Nios-II 3488######################################################################### 3489 3490EP1C20_config : unconfig 3491 @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera 3492 3493EP1S10_config : unconfig 3494 @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera 3495 3496EP1S40_config : unconfig 3497 @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera 3498 3499PK1C20_config : unconfig 3500 @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent 3501 3502PCI5441_config : unconfig 3503 @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent 3504 3505#======================================================================== 3506## Microblaze 3507#======================================================================== 3508 3509microblaze-generic_config: unconfig 3510 @mkdir -p $(obj)include 3511 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx 3512 3513#======================================================================== 3514# Blackfin 3515#======================================================================== 3516 3517# Analog Devices boards 3518BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ 3519 bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit 3520 3521# Bluetechnix tinyboards 3522BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 tcm-bf537 3523 3524# Misc third party boards 3525BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp 3526 3527# I-SYST Micromodule 3528BFIN_BOARDS += ibf-dsp561 3529 3530$(BFIN_BOARDS:%=%_config) : unconfig 3531 @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) 3532 3533$(BFIN_BOARDS): 3534 $(MAKE) $@_config 3535 $(MAKE) 3536 3537#======================================================================== 3538# AVR32 3539#======================================================================== 3540 3541atngw100_config : unconfig 3542 @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x 3543 3544atstk1002_config : unconfig 3545 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3546 3547atstk1003_config : unconfig 3548 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3549 3550atstk1004_config : unconfig 3551 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3552 3553atstk1006_config : unconfig 3554 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3555 3556favr-32-ezkit_config : unconfig 3557 @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x 3558 3559hammerhead_config : unconfig 3560 @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x 3561 3562mimc200_config : unconfig 3563 @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x 3564 3565#======================================================================== 3566# SH3 (SuperH) 3567#======================================================================== 3568 3569######################################################################### 3570## sh2 (Renesas SuperH) 3571######################################################################### 3572rsk7203_config: unconfig 3573 @mkdir -p $(obj)include 3574 @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h 3575 @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas 3576 3577######################################################################### 3578## sh3 (Renesas SuperH) 3579######################################################################### 3580 3581mpr2_config: unconfig 3582 @mkdir -p $(obj)include 3583 @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h 3584 @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 3585 3586ms7720se_config: unconfig 3587 @mkdir -p $(obj)include 3588 @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h 3589 @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se 3590 3591######################################################################### 3592## sh4 (Renesas SuperH) 3593######################################################################### 3594 3595MigoR_config : unconfig 3596 @mkdir -p $(obj)include 3597 @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h 3598 @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas 3599 3600ms7750se_config: unconfig 3601 @mkdir -p $(obj)include 3602 @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h 3603 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se 3604 3605ms7722se_config : unconfig 3606 @mkdir -p $(obj)include 3607 @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h 3608 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se 3609 3610r2dplus_config : unconfig 3611 @mkdir -p $(obj)include 3612 @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h 3613 @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas 3614 3615r7780mp_config: unconfig 3616 @mkdir -p $(obj)include 3617 @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h 3618 @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas 3619 3620sh7763rdp_config : unconfig 3621 @mkdir -p $(obj)include 3622 @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h 3623 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas 3624 3625xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) 3626sh7785lcr_32bit_config \ 3627sh7785lcr_config : unconfig 3628 @mkdir -p $(obj)include 3629 @mkdir -p $(obj)board/renesas/sh7785lcr 3630 @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h 3631 @if [ "$(findstring 32bit, $@)" ] ; then \ 3632 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ 3633 echo "TEXT_BASE = 0x8ff80000" > \ 3634 $(obj)board/renesas/sh7785lcr/config.tmp ; \ 3635 $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ 3636 fi 3637 @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas 3638 3639ap325rxa_config : unconfig 3640 @mkdir -p $(obj)include 3641 @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h 3642 @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas 3643 3644espt_config : unconfig 3645 @mkdir -p $(obj)include 3646 @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h 3647 @$(MKCONFIG) -a $(@:_config=) sh sh4 espt 3648 3649#======================================================================== 3650# SPARC 3651#======================================================================== 3652 3653######################################################################### 3654## LEON3 3655######################################################################### 3656 3657# Gaisler GR-XC3S-1500 board 3658gr_xc3s_1500_config : unconfig 3659 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler 3660 3661# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system 3662gr_cpci_ax2000_config : unconfig 3663 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler 3664 3665# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS 3666# Development board Stratix II edition, FPGA Device EP2S60. 3667gr_ep2s60_config: unconfig 3668 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler 3669 3670# Gaisler LEON3 GRSIM simulator 3671grsim_config : unconfig 3672 @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler 3673 3674######################################################################### 3675## LEON2 3676######################################################################### 3677 3678# Gaisler LEON2 GRSIM simulator 3679grsim_leon2_config : unconfig 3680 @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler 3681 3682######################################################################### 3683######################################################################### 3684######################################################################### 3685 3686clean: 3687 @rm -f $(obj)examples/standalone/82559_eeprom \ 3688 $(obj)examples/standalone/atmel_df_pow2 \ 3689 $(obj)examples/standalone/eepro100_eeprom \ 3690 $(obj)examples/standalone/hello_world \ 3691 $(obj)examples/standalone/interrupt \ 3692 $(obj)examples/standalone/mem_to_mem_idma2intr \ 3693 $(obj)examples/standalone/sched \ 3694 $(obj)examples/standalone/smc91111_eeprom \ 3695 $(obj)examples/standalone/test_burst \ 3696 $(obj)examples/standalone/timer 3697 @rm -f $(obj)examples/api/demo{,.bin} 3698 @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ 3699 $(obj)tools/env/{fw_printenv,fw_setenv} \ 3700 $(obj)tools/envcrc \ 3701 $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ 3702 $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ 3703 $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ 3704 $(obj)tools/ncb $(obj)tools/ubsha1 3705 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ 3706 $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ 3707 $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ 3708 $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ 3709 $(obj)lib_blackfin/u-boot.lds \ 3710 $(obj)u-boot.lds \ 3711 $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] 3712 @rm -f $(obj)include/bmp_logo.h 3713 @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} 3714 @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map} 3715 @rm -f $(ONENAND_BIN) 3716 @rm -f $(obj)onenand_ipl/u-boot.lds 3717 @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) 3718 @find $(OBJTREE) -type f \ 3719 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 3720 -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ 3721 | xargs rm -f 3722 3723clobber: clean 3724 @find $(OBJTREE) -type f \( -name .depend \ 3725 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 3726 -print0 \ 3727 | xargs -0 rm -f 3728 @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ 3729 $(obj)cscope.* $(obj)*.*~ 3730 @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) 3731 @rm -f $(obj)u-boot.kwb 3732 @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} 3733 @rm -f $(obj)cpu/mpc824x/bedbug_603e.c 3734 @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm 3735 @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f 3736 @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f 3737 3738ifeq ($(OBJTREE),$(SRCTREE)) 3739mrproper \ 3740distclean: clobber unconfig 3741else 3742mrproper \ 3743distclean: clobber unconfig 3744 rm -rf $(obj)* 3745endif 3746 3747backup: 3748 F=`basename $(TOPDIR)` ; cd .. ; \ 3749 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 3750 3751######################################################################### 3752