xref: /openbmc/u-boot/Makefile (revision 8eef803a)
1# SPDX-License-Identifier: GPL-2.0+
2
3VERSION = 2019
4PATCHLEVEL = 01
5SUBLEVEL =
6EXTRAVERSION =
7NAME =
8
9# *DOCUMENTATION*
10# To see a list of typical targets execute "make help"
11# More info can be located in ./README
12# Comments in this file are targeted only to the developer, do not
13# expect to learn how to build the kernel reading this file.
14
15# o Do not use make's built-in rules and variables
16#   (this increases performance and avoids hard-to-debug behaviour);
17# o Look for make include files relative to root of kernel src
18MAKEFLAGS += -rR --include-dir=$(CURDIR)
19
20# Avoid funny character set dependencies
21unexport LC_ALL
22LC_COLLATE=C
23LC_NUMERIC=C
24export LC_COLLATE LC_NUMERIC
25
26# Avoid interference with shell env settings
27unexport GREP_OPTIONS
28
29# We are using a recursive build, so we need to do a little thinking
30# to get the ordering right.
31#
32# Most importantly: sub-Makefiles should only ever modify files in
33# their own directory. If in some directory we have a dependency on
34# a file in another dir (which doesn't happen often, but it's often
35# unavoidable when linking the built-in.o targets which finally
36# turn into vmlinux), we will call a sub make in that other dir, and
37# after that we are sure that everything which is in that other dir
38# is now up to date.
39#
40# The only cases where we need to modify files which have global
41# effects are thus separated out and done before the recursive
42# descending is started. They are now explicitly listed as the
43# prepare rule.
44
45# Beautify output
46# ---------------------------------------------------------------------------
47#
48# Normally, we echo the whole command before executing it. By making
49# that echo $($(quiet)$(cmd)), we now have the possibility to set
50# $(quiet) to choose other forms of output instead, e.g.
51#
52#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
53#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
54#
55# If $(quiet) is empty, the whole command will be printed.
56# If it is set to "quiet_", only the short version will be printed.
57# If it is set to "silent_", nothing will be printed at all, since
58# the variable $(silent_cmd_cc_o_c) doesn't exist.
59#
60# A simple variant is to prefix commands with $(Q) - that's useful
61# for commands that shall be hidden in non-verbose mode.
62#
63#	$(Q)ln $@ :<
64#
65# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
66# If KBUILD_VERBOSE equals 1 then the above command is displayed.
67#
68# To put more focus on warnings, be less verbose as default
69# Use 'make V=1' to see the full commands
70
71ifeq ("$(origin V)", "command line")
72  KBUILD_VERBOSE = $(V)
73endif
74ifndef KBUILD_VERBOSE
75  KBUILD_VERBOSE = 0
76endif
77
78ifeq ($(KBUILD_VERBOSE),1)
79  quiet =
80  Q =
81else
82  quiet=quiet_
83  Q = @
84endif
85
86# If the user is running make -s (silent mode), suppress echoing of
87# commands
88
89ifneq ($(filter 4.%,$(MAKE_VERSION)),)	# make-4
90ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
91  quiet=silent_
92endif
93else					# make-3.8x
94ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
95  quiet=silent_
96endif
97endif
98
99export quiet Q KBUILD_VERBOSE
100
101# kbuild supports saving output files in a separate directory.
102# To locate output files in a separate directory two syntaxes are supported.
103# In both cases the working directory must be the root of the kernel src.
104# 1) O=
105# Use "make O=dir/to/store/output/files/"
106#
107# 2) Set KBUILD_OUTPUT
108# Set the environment variable KBUILD_OUTPUT to point to the directory
109# where the output files shall be placed.
110# export KBUILD_OUTPUT=dir/to/store/output/files/
111# make
112#
113# The O= assignment takes precedence over the KBUILD_OUTPUT environment
114# variable.
115
116# KBUILD_SRC is set on invocation of make in OBJ directory
117# KBUILD_SRC is not intended to be used by the regular user (for now)
118ifeq ($(KBUILD_SRC),)
119
120# OK, Make called in directory where kernel src resides
121# Do we want to locate output files in a separate directory?
122ifeq ("$(origin O)", "command line")
123  KBUILD_OUTPUT := $(O)
124endif
125
126# That's our default target when none is given on the command line
127PHONY := _all
128_all:
129
130# Cancel implicit rules on top Makefile
131$(CURDIR)/Makefile Makefile: ;
132
133ifneq ($(KBUILD_OUTPUT),)
134# Invoke a second make in the output directory, passing relevant variables
135# check that the output directory actually exists
136saved-output := $(KBUILD_OUTPUT)
137KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
138								&& /bin/pwd)
139$(if $(KBUILD_OUTPUT),, \
140     $(error failed to create output directory "$(saved-output)"))
141
142PHONY += $(MAKECMDGOALS) sub-make
143
144$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
145	@:
146
147sub-make: FORCE
148	$(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
149	-f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
150
151# Leave processing to above invocation of make
152skip-makefile := 1
153endif # ifneq ($(KBUILD_OUTPUT),)
154endif # ifeq ($(KBUILD_SRC),)
155
156# We process the rest of the Makefile if this is the final invocation of make
157ifeq ($(skip-makefile),)
158
159# Do not print "Entering directory ...",
160# but we want to display it when entering to the output directory
161# so that IDEs/editors are able to understand relative filenames.
162MAKEFLAGS += --no-print-directory
163
164# Call a source code checker (by default, "sparse") as part of the
165# C compilation.
166#
167# Use 'make C=1' to enable checking of only re-compiled files.
168# Use 'make C=2' to enable checking of *all* source files, regardless
169# of whether they are re-compiled or not.
170#
171# See the file "Documentation/sparse.txt" for more details, including
172# where to get the "sparse" utility.
173
174ifeq ("$(origin C)", "command line")
175  KBUILD_CHECKSRC = $(C)
176endif
177ifndef KBUILD_CHECKSRC
178  KBUILD_CHECKSRC = 0
179endif
180
181# Use make M=dir to specify directory of external module to build
182# Old syntax make ... SUBDIRS=$PWD is still supported
183# Setting the environment variable KBUILD_EXTMOD take precedence
184ifdef SUBDIRS
185  KBUILD_EXTMOD ?= $(SUBDIRS)
186endif
187
188ifeq ("$(origin M)", "command line")
189  KBUILD_EXTMOD := $(M)
190endif
191
192# If building an external module we do not care about the all: rule
193# but instead _all depend on modules
194PHONY += all
195ifeq ($(KBUILD_EXTMOD),)
196_all: all
197else
198_all: modules
199endif
200
201ifeq ($(KBUILD_SRC),)
202        # building in the source tree
203        srctree := .
204else
205        ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
206                # building in a subdirectory of the source tree
207                srctree := ..
208        else
209                srctree := $(KBUILD_SRC)
210        endif
211endif
212objtree		:= .
213src		:= $(srctree)
214obj		:= $(objtree)
215
216VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
217
218export srctree objtree VPATH
219
220# Make sure CDPATH settings don't interfere
221unexport CDPATH
222
223#########################################################################
224
225HOSTARCH := $(shell uname -m | \
226	sed -e s/i.86/x86/ \
227	    -e s/sun4u/sparc64/ \
228	    -e s/arm.*/arm/ \
229	    -e s/sa110/arm/ \
230	    -e s/ppc64/powerpc/ \
231	    -e s/ppc/powerpc/ \
232	    -e s/macppc/powerpc/\
233	    -e s/sh.*/sh/)
234
235HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
236	    sed -e 's/\(cygwin\).*/cygwin/')
237
238export	HOSTARCH HOSTOS
239
240#########################################################################
241
242# set default to nothing for native builds
243ifeq ($(HOSTARCH),$(ARCH))
244CROSS_COMPILE ?=
245endif
246
247KCONFIG_CONFIG	?= .config
248export KCONFIG_CONFIG
249
250# SHELL used by kbuild
251CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
252	  else if [ -x /bin/bash ]; then echo /bin/bash; \
253	  else echo sh; fi ; fi)
254
255HOSTCC       = cc
256HOSTCXX      = c++
257HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \
258		$(if $(CONFIG_TOOLS_DEBUG),-g)
259HOSTCXXFLAGS = -O2
260
261# With the move to GCC 6, we have implicitly upgraded our language
262# standard to GNU11 (see https://gcc.gnu.org/gcc-5/porting_to.html).
263# Some Linux distributions (including RHEL7, SLES13, Debian 8) still
264# have older compilers as their default, so we make it explicit for
265# these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
266CSTD_FLAG := -std=gnu11
267ifeq ($(HOSTOS),linux)
268HOSTCFLAGS += $(CSTD_FLAG)
269endif
270
271ifeq ($(HOSTOS),cygwin)
272HOSTCFLAGS	+= -ansi
273endif
274
275# Mac OS X / Darwin's C preprocessor is Apple specific.  It
276# generates numerous errors and warnings.  We want to bypass it
277# and use GNU C's cpp.	To do this we pass the -traditional-cpp
278# option to the compiler.  Note that the -traditional-cpp flag
279# DOES NOT have the same semantics as GNU C's flag, all it does
280# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
281#
282# Apple's linker is similar, thanks to the new 2 stage linking
283# multiple symbol definitions are treated as errors, hence the
284# -multiply_defined suppress option to turn off this error.
285#
286ifeq ($(HOSTOS),darwin)
287# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
288DARWIN_MAJOR_VERSION	= $(shell sw_vers -productVersion | cut -f 1 -d '.')
289DARWIN_MINOR_VERSION	= $(shell sw_vers -productVersion | cut -f 2 -d '.')
290
291os_x_before	= $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
292	$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
293
294# Snow Leopards build environment has no longer restrictions as described above
295HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
296HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
297HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
298
299# since Lion (10.7) ASLR is on by default, but we use linker generated lists
300# in some host tools which is a problem then ... so disable ASLR for these
301# tools
302HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
303endif
304
305# Decide whether to build built-in, modular, or both.
306# Normally, just do built-in.
307
308KBUILD_MODULES :=
309KBUILD_BUILTIN := 1
310
311# If we have only "make modules", don't compile built-in objects.
312# When we're building modules with modversions, we need to consider
313# the built-in objects during the descend as well, in order to
314# make sure the checksums are up to date before we record them.
315
316ifeq ($(MAKECMDGOALS),modules)
317  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
318endif
319
320# If we have "make <whatever> modules", compile modules
321# in addition to whatever we do anyway.
322# Just "make" or "make all" shall build modules as well
323
324# U-Boot does not need modules
325#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
326#  KBUILD_MODULES := 1
327#endif
328
329#ifeq ($(MAKECMDGOALS),)
330#  KBUILD_MODULES := 1
331#endif
332
333export KBUILD_MODULES KBUILD_BUILTIN
334export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
335
336# We need some generic definitions (do not try to remake the file).
337scripts/Kbuild.include: ;
338include scripts/Kbuild.include
339
340# Make variables (CC, etc...)
341
342AS		= $(CROSS_COMPILE)as
343# Always use GNU ld
344ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
345LD		= $(CROSS_COMPILE)ld.bfd
346else
347LD		= $(CROSS_COMPILE)ld
348endif
349CC		= $(CROSS_COMPILE)gcc
350CPP		= $(CC) -E
351AR		= $(CROSS_COMPILE)ar
352NM		= $(CROSS_COMPILE)nm
353LDR		= $(CROSS_COMPILE)ldr
354STRIP		= $(CROSS_COMPILE)strip
355OBJCOPY		= $(CROSS_COMPILE)objcopy
356OBJDUMP		= $(CROSS_COMPILE)objdump
357LEX		= flex
358YACC		= bison
359AWK		= awk
360PERL		= perl
361PYTHON		?= python
362PYTHON2		= python2
363PYTHON3		= python3
364DTC		?= $(objtree)/scripts/dtc/dtc
365CHECK		= sparse
366
367CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
368		  -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
369
370KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
371
372KBUILD_CFLAGS   := -Wall -Wstrict-prototypes \
373		   -Wno-format-security \
374		   -fno-builtin -ffreestanding $(CSTD_FLAG)
375KBUILD_CFLAGS	+= -fshort-wchar -fno-strict-aliasing
376KBUILD_AFLAGS   := -D__ASSEMBLY__
377
378# Don't generate position independent code
379KBUILD_CFLAGS	+= $(call cc-option,-fno-PIE)
380KBUILD_AFLAGS	+= $(call cc-option,-fno-PIE)
381
382# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
383UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
384UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
385
386export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
387export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
388export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
389export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
390export MAKE LEX YACC AWK PERL PYTHON PYTHON2 PYTHON3
391export HOSTCXX HOSTCXXFLAGS CHECK CHECKFLAGS DTC DTC_FLAGS
392
393export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
394export KBUILD_CFLAGS KBUILD_AFLAGS
395
396# When compiling out-of-tree modules, put MODVERDIR in the module
397# tree rather than in the kernel tree. The kernel tree might
398# even be read-only.
399export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
400
401# Files to ignore in find ... statements
402
403export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
404			  -name CVS -o -name .pc -o -name .hg -o -name .git \) \
405			  -prune -o
406export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
407			 --exclude CVS --exclude .pc --exclude .hg --exclude .git
408
409# ===========================================================================
410# Rules shared between *config targets and build targets
411
412# Basic helpers built in scripts/
413PHONY += scripts_basic
414scripts_basic:
415	$(Q)$(MAKE) $(build)=scripts/basic
416	$(Q)rm -f .tmp_quiet_recordmcount
417
418# To avoid any implicit rule to kick in, define an empty command.
419scripts/basic/%: scripts_basic ;
420
421PHONY += outputmakefile
422# outputmakefile generates a Makefile in the output directory, if using a
423# separate output directory. This allows convenient use of make in the
424# output directory.
425outputmakefile:
426ifneq ($(KBUILD_SRC),)
427	$(Q)ln -fsn $(srctree) source
428	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
429	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
430endif
431
432# To make sure we do not include .config for any of the *config targets
433# catch them early, and hand them over to scripts/kconfig/Makefile
434# It is allowed to specify more targets when calling make, including
435# mixing *config targets and build targets.
436# For example 'make oldconfig all'.
437# Detect when mixed targets is specified, and make a second invocation
438# of make so .config is not included in this case either (for *config).
439
440version_h := include/generated/version_autogenerated.h
441timestamp_h := include/generated/timestamp_autogenerated.h
442defaultenv_h := include/generated/defaultenv_autogenerated.h
443
444no-dot-config-targets := clean clobber mrproper distclean \
445			 help %docs check% coccicheck \
446			 ubootversion backup tests check qcheck
447
448config-targets := 0
449mixed-targets  := 0
450dot-config     := 1
451
452ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
453	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
454		dot-config := 0
455	endif
456endif
457
458ifeq ($(KBUILD_EXTMOD),)
459        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
460                config-targets := 1
461                ifneq ($(words $(MAKECMDGOALS)),1)
462                        mixed-targets := 1
463                endif
464        endif
465endif
466
467ifeq ($(mixed-targets),1)
468# ===========================================================================
469# We're called with mixed targets (*config and build targets).
470# Handle them one by one.
471
472PHONY += $(MAKECMDGOALS) __build_one_by_one
473
474$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
475	@:
476
477__build_one_by_one:
478	$(Q)set -e; \
479	for i in $(MAKECMDGOALS); do \
480		$(MAKE) -f $(srctree)/Makefile $$i; \
481	done
482
483else
484ifeq ($(config-targets),1)
485# ===========================================================================
486# *config targets only - make sure prerequisites are updated, and descend
487# in scripts/kconfig to make the *config target
488
489KBUILD_DEFCONFIG := sandbox_defconfig
490export KBUILD_DEFCONFIG KBUILD_KCONFIG
491
492config: scripts_basic outputmakefile FORCE
493	$(Q)$(MAKE) $(build)=scripts/kconfig $@
494
495%config: scripts_basic outputmakefile FORCE
496	$(Q)$(MAKE) $(build)=scripts/kconfig $@
497
498else
499# ===========================================================================
500# Build targets only - this includes vmlinux, arch specific targets, clean
501# targets and others. In general all targets except *config targets.
502
503# Additional helpers built in scripts/
504# Carefully list dependencies so we do not try to build scripts twice
505# in parallel
506PHONY += scripts
507scripts: scripts_basic include/config/auto.conf
508	$(Q)$(MAKE) $(build)=$(@)
509
510ifeq ($(dot-config),1)
511# Read in config
512-include include/config/auto.conf
513
514# Read in dependencies to all Kconfig* files, make sure to run
515# oldconfig if changes are detected.
516-include include/config/auto.conf.cmd
517
518# To avoid any implicit rule to kick in, define an empty command
519$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
520
521# If .config is newer than include/config/auto.conf, someone tinkered
522# with it and forgot to run make oldconfig.
523# if auto.conf.cmd is missing then we are probably in a cleaned tree so
524# we execute the config step to be sure to catch updated Kconfig files
525include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
526	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
527	@# If the following part fails, include/config/auto.conf should be
528	@# deleted so "make silentoldconfig" will be re-run on the next build.
529	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
530		{ rm -f include/config/auto.conf; false; }
531	@# include/config.h has been updated after "make silentoldconfig".
532	@# We need to touch include/config/auto.conf so it gets newer
533	@# than include/config.h.
534	@# Otherwise, 'make silentoldconfig' would be invoked twice.
535	$(Q)touch include/config/auto.conf
536
537u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
538	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
539
540-include include/autoconf.mk
541-include include/autoconf.mk.dep
542
543# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
544# is up-to-date. When we switch to a different board configuration, old CONFIG
545# macros are still remaining in include/config/auto.conf. Without the following
546# gimmick, wrong config.mk would be included leading nasty warnings/errors.
547ifneq ($(wildcard $(KCONFIG_CONFIG)),)
548ifneq ($(wildcard include/config/auto.conf),)
549autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
550						include/config/auto.conf)
551ifeq ($(autoconf_is_old),)
552include config.mk
553include arch/$(ARCH)/Makefile
554endif
555endif
556endif
557
558# These are set by the arch-specific config.mk. Make sure they are exported
559# so they can be used when building an EFI application.
560export EFI_LDS		# Filename of EFI link script in arch/$(ARCH)/lib
561export EFI_CRT0		# Filename of EFI CRT0 in arch/$(ARCH)/lib
562export EFI_RELOC	# Filename of EFU relocation code in arch/$(ARCH)/lib
563export CFLAGS_EFI	# Compiler flags to add when building EFI app
564export CFLAGS_NON_EFI	# Compiler flags to remove when building EFI app
565export EFI_TARGET	# binutils target if EFI is natively supported
566
567# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
568# that (or fail if absent).  Otherwise, search for a linker script in a
569# standard location.
570
571ifndef LDSCRIPT
572	#LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
573	ifdef CONFIG_SYS_LDSCRIPT
574		# need to strip off double quotes
575		LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
576	endif
577endif
578
579# If there is no specified link script, we look in a number of places for it
580ifndef LDSCRIPT
581	ifeq ($(wildcard $(LDSCRIPT)),)
582		LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
583	endif
584	ifeq ($(wildcard $(LDSCRIPT)),)
585		LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
586	endif
587	ifeq ($(wildcard $(LDSCRIPT)),)
588		LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
589	endif
590endif
591
592else
593# Dummy target needed, because used as prerequisite
594include/config/auto.conf: ;
595endif # $(dot-config)
596
597#
598# Xtensa linker script cannot be preprocessed with -ansi because of
599# preprocessor operations on strings that don't make C identifiers.
600#
601ifeq ($(CONFIG_XTENSA),)
602LDPPFLAGS	+= -ansi
603endif
604
605ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
606KBUILD_CFLAGS	+= -Os
607else
608KBUILD_CFLAGS	+= -O2
609endif
610
611KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
612KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
613
614# change __FILE__ to the relative path from the srctree
615KBUILD_CFLAGS	+= $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
616
617KBUILD_CFLAGS	+= -g
618# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
619# option to the assembler.
620KBUILD_AFLAGS	+= -g
621
622# Report stack usage if supported
623# ARC tools based on GCC 7.1 has an issue with stack usage
624# with naked functions, see commit message for more details
625ifndef CONFIG_ARC
626ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
627	KBUILD_CFLAGS += -fstack-usage
628endif
629endif
630
631KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
632ifeq ($(cc-name),clang)
633KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
634KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
635KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
636KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
637KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior)
638endif
639
640# turn jbsr into jsr for m68k
641ifeq ($(ARCH),m68k)
642ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
643KBUILD_AFLAGS += -Wa,-gstabs,-S
644endif
645endif
646
647# Prohibit date/time macros, which would make the build non-deterministic
648KBUILD_CFLAGS   += $(call cc-option,-Werror=date-time)
649
650include scripts/Makefile.extrawarn
651
652# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
653KBUILD_CPPFLAGS += $(KCPPFLAGS)
654KBUILD_AFLAGS += $(KAFLAGS)
655KBUILD_CFLAGS += $(KCFLAGS)
656
657# Use UBOOTINCLUDE when you must reference the include/ directory.
658# Needed to be compatible with the O= option
659UBOOTINCLUDE    := \
660		-Iinclude \
661		$(if $(KBUILD_SRC), -I$(srctree)/include) \
662		$(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
663			$(if $(CONFIG_HAS_THUMB2),, \
664				-I$(srctree)/arch/$(ARCH)/thumb1/include),) \
665		-I$(srctree)/arch/$(ARCH)/include \
666		-include $(srctree)/include/linux/kconfig.h
667
668NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
669CHECKFLAGS     += $(NOSTDINC_FLAGS)
670
671# FIX ME
672cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
673							$(NOSTDINC_FLAGS)
674c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
675
676#########################################################################
677# U-Boot objects....order is important (i.e. start must be first)
678
679HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
680
681libs-y += lib/
682libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
683libs-$(CONFIG_OF_EMBED) += dts/
684libs-y += fs/
685libs-y += net/
686libs-y += disk/
687libs-y += drivers/
688libs-y += drivers/dma/
689libs-y += drivers/gpio/
690libs-y += drivers/i2c/
691libs-y += drivers/mtd/
692libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
693libs-y += drivers/mtd/onenand/
694libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
695libs-y += drivers/mtd/spi/
696libs-y += drivers/net/
697libs-y += drivers/net/phy/
698libs-y += drivers/power/ \
699	drivers/power/domain/ \
700	drivers/power/fuel_gauge/ \
701	drivers/power/mfd/ \
702	drivers/power/pmic/ \
703	drivers/power/battery/ \
704	drivers/power/regulator/
705libs-y += drivers/spi/
706libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
707libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
708libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
709libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
710libs-y += drivers/serial/
711libs-y += drivers/usb/dwc3/
712libs-y += drivers/usb/common/
713libs-y += drivers/usb/emul/
714libs-y += drivers/usb/eth/
715libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
716libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
717libs-y += drivers/usb/host/
718libs-y += drivers/usb/musb/
719libs-y += drivers/usb/musb-new/
720libs-y += drivers/usb/phy/
721libs-y += drivers/usb/ulpi/
722libs-y += cmd/
723libs-y += common/
724libs-y += env/
725libs-$(CONFIG_API) += api/
726libs-$(CONFIG_HAS_POST) += post/
727libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
728libs-$(CONFIG_UT_ENV) += test/env/
729libs-$(CONFIG_UT_OVERLAY) += test/overlay/
730
731libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
732
733libs-y := $(sort $(libs-y))
734
735u-boot-dirs	:= $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
736
737u-boot-alldirs	:= $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
738
739libs-y		:= $(patsubst %/, %/built-in.o, $(libs-y))
740
741u-boot-init := $(head-y)
742u-boot-main := $(libs-y)
743
744
745# Add GCC lib
746ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
747PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
748else
749PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
750endif
751PLATFORM_LIBS += $(PLATFORM_LIBGCC)
752
753ifdef CONFIG_CC_COVERAGE
754KBUILD_CFLAGS += --coverage
755PLATFORM_LIBGCC += -lgcov
756endif
757
758export PLATFORM_LIBS
759export PLATFORM_LIBGCC
760
761# Special flags for CPP when processing the linker script.
762# Pass the version down so we can handle backwards compatibility
763# on the fly.
764LDPPFLAGS += \
765	-include $(srctree)/include/u-boot/u-boot.lds.h \
766	-DCPUDIR=$(CPUDIR) \
767	$(shell $(LD) --version | \
768	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
769
770#########################################################################
771#########################################################################
772
773ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
774BOARD_SIZE_CHECK = \
775	@actual=`wc -c $@ | awk '{print $$1}'`; \
776	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
777	if test $$actual -gt $$limit; then \
778		echo "$@ exceeds file size limit:" >&2 ; \
779		echo "  limit:  $$limit bytes" >&2 ; \
780		echo "  actual: $$actual bytes" >&2 ; \
781		echo "  excess: $$((actual - limit)) bytes" >&2; \
782		exit 1; \
783	fi
784else
785BOARD_SIZE_CHECK =
786endif
787
788# Statically apply RELA-style relocations (currently arm64 only)
789# This is useful for arm64 where static relocation needs to be performed on
790# the raw binary, but certain simulators only accept an ELF file (but don't
791# do the relocation).
792ifneq ($(CONFIG_STATIC_RELA),)
793# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
794DO_STATIC_RELA = \
795	start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
796	end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
797	tools/relocate-rela $(2) $(3) $$start $$end
798else
799DO_STATIC_RELA =
800endif
801
802# Always append ALL so that arch config.mk's can add custom ones
803ALL-y += u-boot.srec u-boot.bin u-boot.sym System.map binary_size_check
804
805ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
806ifeq ($(CONFIG_SPL_FSL_PBL),y)
807ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
808else
809ifneq ($(CONFIG_SECURE_BOOT), y)
810# For Secure Boot The Image needs to be signed and Header must also
811# be included. So The image has to be built explicitly
812ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
813endif
814endif
815ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
816ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
817ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
818else
819ifeq ($(CONFIG_MX7)$(CONFIG_SECURE_BOOT), yy)
820ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
821else
822ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
823endif
824endif
825ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
826ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
827ifeq ($(CONFIG_SPL_FRAMEWORK),y)
828ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
829endif
830ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
831ifneq ($(CONFIG_SPL_TARGET),)
832ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
833endif
834ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
835ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
836ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
837
838ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
839ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
840endif
841
842# Build a combined spl + u-boot image for sunxi
843ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_SPL),yy)
844ALL-y += u-boot-sunxi-with-spl.bin
845endif
846
847# enable combined SPL/u-boot/dtb rules for tegra
848ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
849ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
850ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb-tegra.bin
851endif
852
853ALL-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
854
855# Add optional build target if defined in board/cpu/soc headers
856ifneq ($(CONFIG_BUILD_TARGET),)
857ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
858endif
859
860ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
861ALL-y += init_sp_bss_offset_check
862endif
863
864ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
865ALL-y += u-boot-with-dtb.bin
866endif
867
868LDFLAGS_u-boot += $(LDFLAGS_FINAL)
869
870# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
871LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
872
873ifeq ($(CONFIG_ARC)$(CONFIG_NIOS2)$(CONFIG_X86)$(CONFIG_XTENSA),)
874LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
875endif
876
877# Normally we fill empty space with 0xff
878quiet_cmd_objcopy = OBJCOPY $@
879cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
880	$(OBJCOPYFLAGS_$(@F)) $< $@
881
882# Provide a version which does not do this, for use by EFI
883quiet_cmd_zobjcopy = OBJCOPY $@
884cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
885
886quiet_cmd_efipayload = OBJCOPY $@
887cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
888
889MKIMAGEOUTPUT ?= /dev/null
890
891quiet_cmd_mkimage = MKIMAGE $@
892cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
893	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
894
895quiet_cmd_mkfitimage = MKIMAGE $@
896cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
897	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
898
899quiet_cmd_cat = CAT     $@
900cmd_cat = cat $(filter-out $(PHONY), $^) > $@
901
902append = cat $(filter-out $< $(PHONY), $^) >> $@
903
904quiet_cmd_pad_cat = CAT     $@
905cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
906
907cfg: u-boot.cfg
908
909quiet_cmd_cfgcheck = CFGCHK  $2
910cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
911		$(srctree)/scripts/config_whitelist.txt $(srctree)
912
913all:		$(ALL-y)
914ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
915	@echo >&2 "===================== WARNING ======================"
916	@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
917	@echo >&2 "(possibly in a subsequent patch in your series)"
918	@echo >&2 "before sending patches to the mailing list."
919	@echo >&2 "===================================================="
920endif
921ifeq ($(CONFIG_MMC),y)
922ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
923	@echo >&2 "===================== WARNING ======================"
924	@echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
925	@echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
926	@echo >&2 "Failure to update by the deadline may result in board removal."
927	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
928	@echo >&2 "===================================================="
929endif
930endif
931ifeq ($(CONFIG_USB),y)
932ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
933	@echo >&2 "===================== WARNING ======================"
934	@echo >&2 "This board does not use CONFIG_DM_USB. Please update"
935	@echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
936	@echo >&2 "Failure to update by the deadline may result in board removal."
937	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
938	@echo >&2 "===================================================="
939endif
940endif
941ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
942ifneq ($(CONFIG_DM_SCSI),y)
943	@echo >&2 "===================== WARNING ======================"
944	@echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
945	@echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
946	@echo >&2 "Failure to update by the deadline may result in board removal."
947	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
948	@echo >&2 "===================================================="
949endif
950endif
951ifeq ($(CONFIG_PCI),y)
952ifneq ($(CONFIG_DM_PCI),y)
953	@echo >&2 "===================== WARNING ======================"
954	@echo >&2 "This board does not use CONFIG_DM_PCI Please update"
955	@echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
956	@echo >&2 "Failure to update by the deadline may result in board removal."
957	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
958	@echo >&2 "===================================================="
959endif
960endif
961ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
962ifneq ($(CONFIG_DM_VIDEO),y)
963	@echo >&2 "===================== WARNING ======================"
964	@echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
965	@echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
966	@echo >&2 "Failure to update by the deadline may result in board removal."
967	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
968	@echo >&2 "===================================================="
969endif
970endif
971ifeq ($(CONFIG_OF_EMBED),y)
972	@echo >&2 "===================== WARNING ======================"
973	@echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
974	@echo >&2 "be used for debugging purposes. Please use"
975	@echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
976	@echo >&2 "See doc/README.fdt-control for more info."
977	@echo >&2 "===================================================="
978endif
979ifeq ($(CONFIG_SPI),y)
980ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
981	@echo >&2 "===================== WARNING ======================"
982	@echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
983	@echo >&2 "the board before v2019.04 for no dm conversion"
984	@echo >&2 "and v2019.07 for partially dm converted drivers."
985	@echo >&2 "Failure to update can lead to driver/board removal"
986	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
987	@echo >&2 "===================================================="
988endif
989endif
990ifeq ($(CONFIG_SPI_FLASH),y)
991ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
992	@echo >&2 "===================== WARNING ======================"
993	@echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
994	@echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
995	@echo >&2 "Failure to update by the deadline may result in board removal."
996	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
997	@echo >&2 "===================================================="
998endif
999endif
1000	@# Check that this build does not use CONFIG options that we do not
1001	@# know about unless they are in Kconfig. All the existing CONFIG
1002	@# options are whitelisted, so new ones should not be added.
1003	$(call cmd,cfgcheck,u-boot.cfg)
1004
1005PHONY += dtbs
1006dtbs: dts/dt.dtb
1007	@:
1008dts/dt.dtb: u-boot
1009	$(Q)$(MAKE) $(build)=dts dtbs
1010
1011quiet_cmd_copy = COPY    $@
1012      cmd_copy = cp $< $@
1013
1014ifeq ($(CONFIG_MULTI_DTB_FIT),y)
1015
1016fit-dtb.blob: dts/dt.dtb FORCE
1017	$(call if_changed,mkimage)
1018
1019MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1020	-a 0 -e 0 -E \
1021	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null
1022
1023u-boot-fit-dtb.bin: u-boot-nodtb.bin fit-dtb.blob
1024	$(call if_changed,cat)
1025
1026u-boot.bin: u-boot-fit-dtb.bin FORCE
1027	$(call if_changed,copy)
1028else ifeq ($(CONFIG_OF_SEPARATE),y)
1029u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
1030	$(call if_changed,cat)
1031
1032u-boot.bin: u-boot-dtb.bin FORCE
1033	$(call if_changed,copy)
1034else
1035u-boot.bin: u-boot-nodtb.bin FORCE
1036	$(call if_changed,copy)
1037endif
1038
1039%.imx: %.bin
1040	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1041
1042%.vyb: %.imx
1043	$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
1044
1045quiet_cmd_copy = COPY    $@
1046      cmd_copy = cp $< $@
1047
1048u-boot.dtb: dts/dt.dtb
1049	$(call cmd,copy)
1050
1051OBJCOPYFLAGS_u-boot.hex := -O ihex
1052
1053OBJCOPYFLAGS_u-boot.srec := -O srec
1054
1055u-boot.hex u-boot.srec: u-boot FORCE
1056	$(call if_changed,objcopy)
1057
1058OBJCOPYFLAGS_u-boot-elf.srec := $(OBJCOPYFLAGS_u-boot.srec)
1059
1060u-boot-elf.srec: u-boot.elf FORCE
1061	$(call if_changed,objcopy)
1062
1063OBJCOPYFLAGS_u-boot-spl.srec = $(OBJCOPYFLAGS_u-boot.srec)
1064
1065spl/u-boot-spl.srec: spl/u-boot-spl FORCE
1066	$(call if_changed,objcopy)
1067
1068OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
1069		$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
1070		$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
1071
1072OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
1073
1074spl/u-boot-spl.hex: spl/u-boot-spl FORCE
1075	$(call if_changed,objcopy)
1076
1077binary_size_check: u-boot-nodtb.bin FORCE
1078	@file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
1079	map_size=$(shell cat u-boot.map | \
1080		awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
1081		| sed 's/0X//g' \
1082		| bc); \
1083	if [ "" != "$$map_size" ]; then \
1084		if test $$map_size -ne $$file_size; then \
1085			echo "u-boot.map shows a binary size of $$map_size" >&2 ; \
1086			echo "  but u-boot-nodtb.bin shows $$file_size" >&2 ; \
1087			exit 1; \
1088		fi \
1089	fi
1090
1091ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
1092ifneq ($(CONFIG_SYS_MALLOC_F_LEN),)
1093subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN)))
1094else
1095subtract_sys_malloc_f_len = true
1096endif
1097# The 1/4 margin below is somewhat arbitrary. The likely initial SP usage is
1098# so low that the DTB could probably use 90%+ of the available space, for
1099# current values of CONFIG_SYS_INIT_SP_BSS_OFFSET at least. However, let's be
1100# safe for now and tweak this later if space becomes tight.
1101# A rejected alternative would be to check that some absolute minimum stack
1102# space was available. However, since CONFIG_SYS_INIT_SP_BSS_OFFSET is
1103# deliberately build-specific, to take account of build-to-build stack usage
1104# differences due to different feature sets, there is no common absolute value
1105# to check against.
1106init_sp_bss_offset_check: u-boot.dtb FORCE
1107	@dtb_size=$(shell wc -c u-boot.dtb | awk '{print $$1}') ; \
1108	space=$(CONFIG_SYS_INIT_SP_BSS_OFFSET) ; \
1109	$(subtract_sys_malloc_f_len) ; \
1110	quarter_space=$$(($${space} / 4)) ; \
1111	if [ $${dtb_size} -gt $${quarter_space} ]; then \
1112		echo "u-boot.dtb is larger than 1 quarter of " >&2 ; \
1113		echo "(CONFIG_SYS_INIT_SP_BSS_OFFSET - CONFIG_SYS_MALLOC_F_LEN)" >&2 ; \
1114		exit 1 ; \
1115	fi
1116endif
1117
1118u-boot-nodtb.bin: u-boot FORCE
1119	$(call if_changed,objcopy)
1120	$(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
1121	$(BOARD_SIZE_CHECK)
1122
1123u-boot.ldr:	u-boot
1124		$(CREATE_LDR_ENV)
1125		$(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
1126		$(BOARD_SIZE_CHECK)
1127
1128# binman
1129# ---------------------------------------------------------------------------
1130# Use 'make BINMAN_DEBUG=1' to enable debugging
1131quiet_cmd_binman = BINMAN  $@
1132cmd_binman = $(srctree)/tools/binman/binman -u -d u-boot.dtb -O . -m \
1133		-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
1134		$(if $(BINMAN_DEBUG),-D) $(BINMAN_$(@F)) $<
1135
1136OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
1137
1138OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
1139
1140u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
1141	$(call if_changed,objcopy)
1142
1143#
1144# U-Boot entry point, needed for booting of full-blown U-Boot
1145# from the SPL U-Boot version.
1146#
1147ifndef CONFIG_SYS_UBOOT_START
1148CONFIG_SYS_UBOOT_START := 0
1149endif
1150
1151# Boards with more complex image requirments can provide an .its source file
1152# or a generator script
1153ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
1154U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
1155else
1156ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
1157U_BOOT_ITS := u-boot.its
1158ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
1159U_BOOT_ITS_DEPS += u-boot-nodtb.bin
1160endif
1161ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
1162U_BOOT_ITS_DEPS += u-boot
1163endif
1164$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
1165	$(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
1166	$(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
1167endif
1168endif
1169
1170ifdef CONFIG_SPL_LOAD_FIT
1171MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
1172	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1173	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
1174	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
1175else
1176MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
1177	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1178	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1179MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
1180	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
1181	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
1182u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
1183CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
1184endif
1185
1186MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
1187
1188MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
1189	-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
1190
1191MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
1192	-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1193	$(if $(KEYDIR),-k $(KEYDIR))
1194
1195MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1196		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
1197
1198u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
1199		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
1200	$(call if_changed,mkimage)
1201	$(BOARD_SIZE_CHECK)
1202
1203u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
1204	$(call if_changed,mkfitimage)
1205	$(BOARD_SIZE_CHECK)
1206
1207u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
1208	$(call if_changed,mkimage)
1209
1210u-boot.sha1:	u-boot.bin
1211		tools/ubsha1 u-boot.bin
1212
1213u-boot.dis:	u-boot
1214		$(OBJDUMP) -d $< > $@
1215
1216ifneq ($(CONFIG_SPL_PAYLOAD),)
1217SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
1218else
1219SPL_PAYLOAD := u-boot.bin
1220endif
1221
1222OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
1223				   --pad-to=$(CONFIG_SPL_PAD_TO)
1224u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
1225	$(call if_changed,pad_cat)
1226
1227ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
1228MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
1229
1230lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
1231	$(call if_changed,mkimage)
1232
1233OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1234
1235lpc32xx-boot-0.bin: lpc32xx-spl.img FORCE
1236	$(call if_changed,objcopy)
1237
1238OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1239
1240lpc32xx-boot-1.bin: lpc32xx-spl.img FORCE
1241	$(call if_changed,objcopy)
1242
1243lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
1244	$(call if_changed,cat)
1245
1246CLEAN_FILES += lpc32xx-*
1247endif
1248
1249OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
1250				   --pad-to=$(CONFIG_TPL_PAD_TO)
1251tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
1252	$(call if_changed,pad_cat)
1253
1254SPL: spl/u-boot-spl.bin FORCE
1255	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1256
1257ifeq ($(CONFIG_ARCH_IMX8M), y)
1258flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
1259	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1260endif
1261
1262u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
1263	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
1264
1265MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
1266
1267u-boot.ubl: u-boot-with-spl.bin FORCE
1268	$(call if_changed,mkimage)
1269
1270MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
1271	$(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
1272	-T aisimage -e $(CONFIG_SPL_TEXT_BASE)
1273spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
1274	$(call if_changed,mkimage)
1275
1276OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
1277u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
1278	$(call if_changed,pad_cat)
1279
1280u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
1281	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
1282u-boot.sb: u-boot.bin spl/u-boot-spl.bin
1283	$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
1284
1285# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
1286# Both images are created using mkimage (crc etc), so that the ROM
1287# bootloader can check its integrity. Padding needs to be done to the
1288# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
1289# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
1290# The resulting image containing both U-Boot images is called u-boot.spr
1291MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
1292	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
1293spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
1294	$(call if_changed,mkimage)
1295
1296OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1297			  --gap-fill=0xff
1298u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
1299	$(call if_changed,pad_cat)
1300
1301ifneq ($(CONFIG_ARCH_SOCFPGA),)
1302quiet_cmd_socboot = SOCBOOT $@
1303cmd_socboot = cat	spl/u-boot-spl.sfp spl/u-boot-spl.sfp	\
1304			spl/u-boot-spl.sfp spl/u-boot-spl.sfp	\
1305			u-boot.img > $@ || rm -f $@
1306u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
1307	$(call if_changed,socboot)
1308endif
1309
1310ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1311u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
1312	$(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
1313	$(call if_changed,binman)
1314
1315ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
1316OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
1317u-boot-br.bin: u-boot FORCE
1318	$(call if_changed,objcopy)
1319endif
1320endif
1321
1322# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1323# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1324# the middle. This is handled by binman based on an image description in the
1325# board's device tree.
1326ifneq ($(CONFIG_X86_RESET_VECTOR),)
1327rom: u-boot.rom FORCE
1328
1329refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
1330	$(call if_changed,copy)
1331
1332quiet_cmd_ldr = LD      $@
1333cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
1334	       $(filter-out FORCE,$^) -o $@
1335
1336u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
1337		$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
1338		$(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
1339	$(call if_changed,binman)
1340
1341OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
1342u-boot-x86-16bit.bin: u-boot FORCE
1343	$(call if_changed,objcopy)
1344endif
1345
1346ifneq ($(CONFIG_ARCH_SUNXI),)
1347ifeq ($(CONFIG_ARM64),)
1348u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
1349	$(call if_changed,binman)
1350else
1351u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
1352	$(call if_changed,cat)
1353endif
1354endif
1355
1356ifneq ($(CONFIG_TEGRA),)
1357ifneq ($(CONFIG_BINMAN),)
1358# Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
1359%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
1360		spl/%-spl %.bin FORCE
1361	$(call if_changed,binman)
1362else
1363OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1364u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot-nodtb.bin FORCE
1365	$(call if_changed,pad_cat)
1366
1367OBJCOPYFLAGS_u-boot-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
1368u-boot-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
1369	$(call if_changed,pad_cat)
1370
1371u-boot-dtb-tegra.bin: u-boot-tegra.bin FORCE
1372	$(call if_changed,copy)
1373endif  # binman
1374endif
1375
1376OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
1377u-boot-app.efi: u-boot FORCE
1378	$(call if_changed,zobjcopy)
1379
1380u-boot.bin.o: u-boot.bin FORCE
1381	$(call if_changed,efipayload)
1382
1383u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
1384	$(call if_changed_dep,cpp_lds)
1385
1386# Rule to link the EFI payload which contains a stub and a U-Boot binary
1387quiet_cmd_u-boot_payload ?= LD      $@
1388      cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
1389      -T u-boot-payload.lds arch/x86/cpu/call32.o \
1390      lib/efi/efi.o lib/efi/efi_stub.o u-boot.bin.o \
1391      $(addprefix arch/$(ARCH)/lib/,$(EFISTUB))
1392
1393u-boot-payload: u-boot.bin.o u-boot-payload.lds FORCE
1394	$(call if_changed,u-boot_payload)
1395
1396OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
1397u-boot-payload.efi: u-boot-payload FORCE
1398	$(call if_changed,zobjcopy)
1399
1400u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
1401	$(call if_changed,cat)
1402
1403#Add a target to create boot binary having SPL binary in PBI format
1404#concatenated with u-boot binary. It is need by PowerPC SoC having
1405#internal SRAM <= 512KB.
1406MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
1407		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
1408		-A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
1409
1410spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
1411	$(call if_changed,mkimage)
1412
1413ifeq ($(ARCH),arm)
1414UBOOT_BINLOAD := u-boot.img
1415else
1416ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
1417UBOOT_BINLOAD := u-boot-with-dtb.bin
1418else
1419UBOOT_BINLOAD := u-boot.bin
1420endif
1421endif
1422
1423OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
1424			  --gap-fill=0xff
1425
1426u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
1427	$(call if_changed,pad_cat)
1428
1429# PPC4xx needs the SPL at the end of the image, since the reset vector
1430# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1431# and need to introduce a new build target with the full blown U-Boot
1432# at the start padded up to the start of the SPL image. And then concat
1433# the SPL image to the end.
1434
1435OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
1436	--pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
1437u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
1438	$(call if_changed,pad_cat)
1439
1440# Create a new ELF from a raw binary file.
1441ifndef PLATFORM_ELFENTRY
1442  PLATFORM_ELFENTRY = "_start"
1443endif
1444quiet_cmd_u-boot-elf ?= LD      $@
1445	cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
1446	--defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
1447	-Ttext=$(CONFIG_SYS_TEXT_BASE)
1448u-boot.elf: u-boot.bin
1449	$(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
1450	$(call if_changed,u-boot-elf)
1451
1452# MediaTek's ARM-based u-boot needs a header to contains its load address
1453# which is parsed by the BootROM.
1454# If the SPL build is enabled, the header will be added to the spl binary,
1455# and the spl binary and the u-boot.img will be combined into one file.
1456# Otherwise the header will be added to the u-boot.bin directly.
1457
1458ifeq ($(CONFIG_SPL),y)
1459spl/u-boot-spl-mtk.bin: spl/u-boot-spl
1460
1461u-boot-mtk.bin: u-boot.dtb u-boot.img spl/u-boot-spl-mtk.bin FORCE
1462	$(call if_changed,binman)
1463else
1464MKIMAGEFLAGS_u-boot-mtk.bin = -T mtk_image \
1465	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
1466	-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
1467
1468u-boot-mtk.bin: u-boot.bin FORCE
1469	$(call if_changed,mkimage)
1470endif
1471
1472ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(ARCH)/Makefile.postlink)
1473
1474# Rule to link u-boot
1475# May be overridden by arch/$(ARCH)/config.mk
1476quiet_cmd_u-boot__ ?= LD      $@
1477      cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
1478      -T u-boot.lds $(u-boot-init)                             \
1479      --start-group $(u-boot-main) --end-group                 \
1480      $(PLATFORM_LIBS) -Map u-boot.map;                        \
1481      $(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
1482
1483quiet_cmd_smap = GEN     common/system_map.o
1484cmd_smap = \
1485	smap=`$(call SYSTEM_MAP,u-boot) | \
1486		awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1487	$(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
1488		-c $(srctree)/common/system_map.c -o common/system_map.o
1489
1490u-boot:	$(u-boot-init) $(u-boot-main) u-boot.lds FORCE
1491	+$(call if_changed,u-boot__)
1492ifeq ($(CONFIG_KALLSYMS),y)
1493	$(call cmd,smap)
1494	$(call cmd,u-boot__) common/system_map.o
1495endif
1496
1497ifeq ($(CONFIG_RISCV),y)
1498	@tools/prelink-riscv $@ 0
1499endif
1500
1501quiet_cmd_sym ?= SYM     $@
1502      cmd_sym ?= $(OBJDUMP) -t $< > $@
1503u-boot.sym: u-boot FORCE
1504	$(call if_changed,sym)
1505
1506# The actual objects are generated when descending,
1507# make sure no implicit rule kicks in
1508$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
1509
1510# Handle descending into subdirectories listed in $(vmlinux-dirs)
1511# Preset locale variables to speed up the build process. Limit locale
1512# tweaks to this spot to avoid wrong language settings when running
1513# make menuconfig etc.
1514# Error messages still appears in the original language
1515
1516PHONY += $(u-boot-dirs)
1517$(u-boot-dirs): prepare scripts
1518	$(Q)$(MAKE) $(build)=$@
1519
1520tools: prepare
1521# The "tools" are needed early
1522$(filter-out tools, $(u-boot-dirs)): tools
1523# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1524# is "yes"), so compile examples after U-Boot is compiled.
1525examples: $(filter-out examples, $(u-boot-dirs))
1526
1527define filechk_uboot.release
1528	echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1529endef
1530
1531# Store (new) UBOOTRELEASE string in include/config/uboot.release
1532include/config/uboot.release: include/config/auto.conf FORCE
1533	$(call filechk,uboot.release)
1534
1535
1536# Things we need to do before we recursively start building the kernel
1537# or the modules are listed in "prepare".
1538# A multi level approach is used. prepareN is processed before prepareN-1.
1539# archprepare is used in arch Makefiles and when processed asm symlink,
1540# version.h and scripts_basic is processed / created.
1541
1542# Listed in dependency order
1543PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1544
1545# prepare3 is used to check if we are building in a separate output directory,
1546# and if so do:
1547# 1) Check that make has not been executed in the kernel src $(srctree)
1548prepare3: include/config/uboot.release
1549ifneq ($(KBUILD_SRC),)
1550	@$(kecho) '  Using $(srctree) as source for U-Boot'
1551	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
1552		echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
1553		echo >&2 "  in the '$(srctree)' directory.";\
1554		/bin/false; \
1555	fi;
1556endif
1557
1558# prepare2 creates a makefile if using a separate output directory
1559prepare2: prepare3 outputmakefile cfg
1560
1561prepare1: prepare2 $(version_h) $(timestamp_h) \
1562                   include/config/auto.conf
1563ifeq ($(wildcard $(LDSCRIPT)),)
1564	@echo >&2 "  Could not find linker script."
1565	@/bin/false
1566endif
1567
1568ifeq ($(CONFIG_USE_DEFAULT_ENV_FILE),y)
1569prepare1: $(defaultenv_h)
1570endif
1571
1572archprepare: prepare1 scripts_basic
1573
1574prepare0: archprepare FORCE
1575	$(Q)$(MAKE) $(build)=.
1576
1577# All the preparing..
1578prepare: prepare0
1579
1580# Generate some files
1581# ---------------------------------------------------------------------------
1582
1583define filechk_version.h
1584	(echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1585	echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1586	echo \#define CC_VERSION_STRING \"$$(LC_ALL=C $(CC) --version | head -n 1)\"; \
1587	echo \#define LD_VERSION_STRING \"$$(LC_ALL=C $(LD) --version | head -n 1)\"; )
1588endef
1589
1590# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1591# The BSD date on the other hand behaves different and would produce errors
1592# with the misused '-d' switch.  Respect that and search a working date with
1593# well known pre- and suffixes for the GNU variant of date.
1594define filechk_timestamp.h
1595	(if test -n "$${SOURCE_DATE_EPOCH}"; then \
1596		SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
1597		DATE=""; \
1598		for date in gdate date.gnu date; do \
1599			$${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
1600		done; \
1601		if test -n "$${DATE}"; then \
1602			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1603			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1604			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
1605			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1606			LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
1607		else \
1608			return 42; \
1609		fi; \
1610	else \
1611		LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1612		LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
1613		LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
1614		LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1615		LC_ALL=C date +'#define U_BOOT_BUILD_DATE 0x%Y%m%d'; \
1616	fi)
1617endef
1618
1619define filechk_defaultenv.h
1620	(grep -v '^#' | \
1621	 grep -v '^$$' | \
1622	 tr '\n' '\0' | \
1623	 sed -e 's/\\\x0/\n/' | \
1624	 xxd -i ; echo ", 0x00" ; )
1625endef
1626
1627$(version_h): include/config/uboot.release FORCE
1628	$(call filechk,version.h)
1629
1630$(timestamp_h): $(srctree)/Makefile FORCE
1631	$(call filechk,timestamp.h)
1632
1633$(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
1634	$(call filechk,defaultenv.h)
1635
1636# ---------------------------------------------------------------------------
1637quiet_cmd_cpp_lds = LDS     $@
1638cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
1639		-D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
1640
1641u-boot.lds: $(LDSCRIPT) prepare FORCE
1642	$(call if_changed_dep,cpp_lds)
1643
1644spl/u-boot-spl.bin: spl/u-boot-spl
1645	@:
1646spl/u-boot-spl: tools prepare \
1647		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb) \
1648		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_TPL_OF_PLATDATA),dts/dt.dtb)
1649	$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
1650
1651spl/sunxi-spl.bin: spl/u-boot-spl
1652	@:
1653
1654spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
1655	@:
1656
1657spl/u-boot-spl.sfp: spl/u-boot-spl
1658	@:
1659
1660spl/boot.bin: spl/u-boot-spl
1661	@:
1662
1663tpl/u-boot-tpl.bin: tools prepare \
1664		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
1665	$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
1666
1667TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)
1668
1669FIND := find
1670FINDFLAGS := -L
1671
1672tags ctags:
1673		ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1674						-name '*.[chS]' -print`
1675		ln -s ctags tags
1676
1677etags:
1678		etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1679						-name '*.[chS]' -print`
1680cscope:
1681		$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1682						cscope.files
1683		cscope -b -q -k
1684
1685SYSTEM_MAP = \
1686		$(NM) $1 | \
1687		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1688		LC_ALL=C sort
1689System.map:	u-boot
1690		@$(call SYSTEM_MAP,$<) > $@
1691
1692#########################################################################
1693
1694# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1695# R_AARCH64_RELATIVE (64-bit).
1696checkarmreloc: u-boot
1697	@RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1698		grep R_A | sort -u`"; \
1699	if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1700		 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1701		echo "$< contains unexpected relocations: $$RELOC"; \
1702		false; \
1703	fi
1704
1705envtools: scripts_basic $(version_h) $(timestamp_h)
1706	$(Q)$(MAKE) $(build)=tools/env
1707
1708tools-only: scripts_basic $(version_h) $(timestamp_h)
1709	$(Q)$(MAKE) $(build)=tools
1710
1711tools-all: export HOST_TOOLS_ALL=y
1712tools-all: envtools tools ;
1713
1714cross_tools: export CROSS_BUILD_TOOLS=y
1715cross_tools: tools ;
1716
1717.PHONY : CHANGELOG
1718CHANGELOG:
1719	git log --no-merges U-Boot-1_1_5.. | \
1720	unexpand -a | sed -e 's/\s\s*$$//' > $@
1721
1722#########################################################################
1723
1724###
1725# Cleaning is done on three levels.
1726# make clean     Delete most generated files
1727#                Leave enough to build external modules
1728# make mrproper  Delete the current configuration, and all generated files
1729# make distclean Remove editor backup files, patch leftover files and the like
1730
1731# Directories & files removed with 'make clean'
1732CLEAN_DIRS  += $(MODVERDIR) \
1733	       $(foreach d, spl tpl, $(patsubst %,$d/%, \
1734			$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
1735
1736CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
1737	       boot* u-boot* MLO* SPL System.map fit-dtb.blob
1738
1739# Directories & files removed with 'make mrproper'
1740MRPROPER_DIRS  += include/config include/generated spl tpl \
1741		  .tmp_objdiff
1742MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \
1743		  ctags etags tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
1744
1745# clean - Delete most, but leave enough to build external modules
1746#
1747clean: rm-dirs  := $(CLEAN_DIRS)
1748clean: rm-files := $(CLEAN_FILES)
1749
1750clean-dirs	:= $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
1751
1752clean-dirs      := $(addprefix _clean_, $(clean-dirs))
1753
1754PHONY += $(clean-dirs) clean archclean
1755$(clean-dirs):
1756	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1757
1758clean: $(clean-dirs)
1759	$(call cmd,rmdirs)
1760	$(call cmd,rmfiles)
1761	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1762		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1763		-o -name '*.ko.*' -o -name '*.su' \
1764		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1765		-o -name '*.lex.c' -o -name '*.tab.[ch]' \
1766		-o -name '*.symtypes' -o -name 'modules.order' \
1767		-o -name modules.builtin -o -name '.tmp_*.o.*' \
1768		-o -name 'dsdt.aml' -o -name 'dsdt.asl.tmp' -o -name 'dsdt.c' \
1769		-o -name '*.efi' -o -name '*.gcno' -o -name '*.so' \) \
1770		-type f -print | xargs rm -f
1771
1772# mrproper - Delete all generated files, including .config
1773#
1774mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1775mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1776mrproper-dirs      := $(addprefix _mrproper_,scripts)
1777
1778PHONY += $(mrproper-dirs) mrproper archmrproper
1779$(mrproper-dirs):
1780	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1781
1782mrproper: clean $(mrproper-dirs)
1783	$(call cmd,rmdirs)
1784	$(call cmd,rmfiles)
1785	@rm -f arch/*/include/asm/arch
1786
1787# distclean
1788#
1789PHONY += distclean
1790
1791distclean: mrproper
1792	@find $(srctree) $(RCS_FIND_IGNORE) \
1793		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1794		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1795		-o -name '.*.rej' -o -name '*%' -o -name 'core' \
1796		-o -name '*.pyc' \) \
1797		-type f -print | xargs rm -f
1798	@rm -f boards.cfg
1799
1800backup:
1801	F=`basename $(srctree)` ; cd .. ; \
1802	gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1803
1804help:
1805	@echo  'Cleaning targets:'
1806	@echo  '  clean		  - Remove most generated files but keep the config'
1807	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
1808	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
1809	@echo  ''
1810	@echo  'Configuration targets:'
1811	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1812	@echo  ''
1813	@echo  'Test targets:'
1814	@echo  ''
1815	@echo  '  check           - Run all automated tests that use sandbox'
1816	@echo  '  qcheck          - Run quick automated tests that use sandbox'
1817	@echo  ''
1818	@echo  'Other generic targets:'
1819	@echo  '  all		  - Build all necessary images depending on configuration'
1820	@echo  '  tests		  - Build U-Boot for sandbox and run tests'
1821	@echo  '* u-boot	  - Build the bare u-boot'
1822	@echo  '  dir/            - Build all files in dir and below'
1823	@echo  '  dir/file.[oisS] - Build specified target only'
1824	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1825	@echo  '                    (requires a recent binutils and recent build (System.map))'
1826	@echo  '  tags/ctags	  - Generate ctags file for editors'
1827	@echo  '  etags		  - Generate etags file for editors'
1828	@echo  '  cscope	  - Generate cscope index'
1829	@echo  '  ubootrelease	  - Output the release version string (use with make -s)'
1830	@echo  '  ubootversion	  - Output the version stored in Makefile (use with make -s)'
1831	@echo  "  cfg		  - Don't build, just create the .cfg files"
1832	@echo  "  envtools	  - Build only the target-side environment tools"
1833	@echo  ''
1834	@echo  'Static analysers'
1835	@echo  '  checkstack      - Generate a list of stack hogs'
1836	@echo  '  coccicheck      - Execute static code analysis with Coccinelle'
1837	@echo  ''
1838	@echo  'Documentation targets:'
1839	@$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
1840	@echo  ''
1841	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1842	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1843	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1844	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1845	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1846	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1847	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1848	@echo  '		1: warnings which may be relevant and do not occur too often'
1849	@echo  '		2: warnings which occur quite often but may still be relevant'
1850	@echo  '		3: more obscure warnings, can most likely be ignored'
1851	@echo  '		Multiple levels can be combined with W=12 or W=123'
1852	@echo  ''
1853	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
1854	@echo  'For further info see the ./README file'
1855
1856tests check:
1857	$(srctree)/test/run
1858
1859qcheck:
1860	$(srctree)/test/run quick
1861
1862# Documentation targets
1863# ---------------------------------------------------------------------------
1864DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
1865	       linkcheckdocs dochelp refcheckdocs
1866PHONY += $(DOC_TARGETS)
1867$(DOC_TARGETS): scripts_basic FORCE
1868	$(Q)$(MAKE) $(build)=Documentation $@
1869
1870endif #ifeq ($(config-targets),1)
1871endif #ifeq ($(mixed-targets),1)
1872
1873PHONY += checkstack ubootrelease ubootversion
1874
1875checkstack:
1876	$(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1877	$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1878
1879ubootrelease:
1880	@echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1881
1882ubootversion:
1883	@echo $(UBOOTVERSION)
1884
1885# Single targets
1886# ---------------------------------------------------------------------------
1887# Single targets are compatible with:
1888# - build with mixed source and output
1889# - build with separate output dir 'make O=...'
1890# - external modules
1891#
1892#  target-dir => where to store outputfile
1893#  build-dir  => directory in kernel source tree to use
1894
1895ifeq ($(KBUILD_EXTMOD),)
1896        build-dir  = $(patsubst %/,%,$(dir $@))
1897        target-dir = $(dir $@)
1898else
1899        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1900        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1901        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1902endif
1903
1904%.s: %.c prepare scripts FORCE
1905	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1906%.i: %.c prepare scripts FORCE
1907	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1908%.o: %.c prepare scripts FORCE
1909	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1910%.lst: %.c prepare scripts FORCE
1911	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1912%.s: %.S prepare scripts FORCE
1913	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1914%.o: %.S prepare scripts FORCE
1915	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1916%.symtypes: %.c prepare scripts FORCE
1917	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1918
1919# Modules
1920/: prepare scripts FORCE
1921	$(cmd_crmodverdir)
1922	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1923	$(build)=$(build-dir)
1924%/: prepare scripts FORCE
1925	$(cmd_crmodverdir)
1926	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1927	$(build)=$(build-dir)
1928%.ko: prepare scripts FORCE
1929	$(cmd_crmodverdir)
1930	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1931	$(build)=$(build-dir) $(@:.ko=.o)
1932	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1933
1934# Consistency checks
1935# ---------------------------------------------------------------------------
1936
1937PHONY += coccicheck
1938
1939coccicheck:
1940	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1941
1942# FIXME Should go into a make.lib or something
1943# ===========================================================================
1944
1945quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1946      cmd_rmdirs = rm -rf $(rm-dirs)
1947
1948quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1949      cmd_rmfiles = rm -f $(rm-files)
1950
1951# read all saved command lines
1952
1953targets := $(wildcard $(sort $(targets)))
1954cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1955
1956ifneq ($(cmd_files),)
1957  $(cmd_files): ;	# Do not try to update included dependency files
1958  include $(cmd_files)
1959endif
1960
1961endif	# skip-makefile
1962
1963PHONY += FORCE
1964FORCE:
1965
1966# Declare the contents of the .PHONY variable as phony.  We keep that
1967# information in a variable so we can use it in if_changed and friends.
1968.PHONY: $(PHONY)
1969