1# 2# (C) Copyright 2000-2005 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundation; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24HOSTARCH := $(shell uname -m | \ 25 sed -e s/i.86/i386/ \ 26 -e s/sun4u/sparc64/ \ 27 -e s/arm.*/arm/ \ 28 -e s/sa110/arm/ \ 29 -e s/powerpc/ppc/ \ 30 -e s/macppc/ppc/) 31 32HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 33 sed -e 's/\(cygwin\).*/cygwin/') 34 35export HOSTARCH HOSTOS 36 37# Deal with colliding definitions from tcsh etc. 38VENDOR= 39 40######################################################################### 41 42TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) 43export TOPDIR 44 45ifeq (include/config.mk,$(wildcard include/config.mk)) 46# load ARCH, BOARD, and CPU configuration 47include include/config.mk 48export ARCH CPU BOARD VENDOR SOC 49# load other configuration 50include $(TOPDIR)/config.mk 51 52ifndef CROSS_COMPILE 53ifeq ($(HOSTARCH),ppc) 54CROSS_COMPILE = 55else 56ifeq ($(ARCH),ppc) 57CROSS_COMPILE = powerpc-linux- 58endif 59ifeq ($(ARCH),arm) 60CROSS_COMPILE = arm-linux- 61endif 62ifeq ($(ARCH),i386) 63ifeq ($(HOSTARCH),i386) 64CROSS_COMPILE = 65else 66CROSS_COMPILE = i386-linux- 67endif 68endif 69ifeq ($(ARCH),mips) 70CROSS_COMPILE = mips_4KC- 71endif 72ifeq ($(ARCH),nios) 73CROSS_COMPILE = nios-elf- 74endif 75ifeq ($(ARCH),nios2) 76CROSS_COMPILE = nios2-elf- 77endif 78ifeq ($(ARCH),m68k) 79CROSS_COMPILE = m68k-elf- 80endif 81ifeq ($(ARCH),microblaze) 82CROSS_COMPILE = mb- 83endif 84endif 85endif 86 87export CROSS_COMPILE 88 89######################################################################### 90# U-Boot objects....order is important (i.e. start must be first) 91 92OBJS = cpu/$(CPU)/start.o 93ifeq ($(CPU),i386) 94OBJS += cpu/$(CPU)/start16.o 95OBJS += cpu/$(CPU)/reset.o 96endif 97ifeq ($(CPU),ppc4xx) 98OBJS += cpu/$(CPU)/resetvec.o 99endif 100ifeq ($(CPU),mpc83xx) 101OBJS += cpu/$(CPU)/resetvec.o 102endif 103ifeq ($(CPU),mpc85xx) 104OBJS += cpu/$(CPU)/resetvec.o 105endif 106 107LIBS = lib_generic/libgeneric.a 108LIBS += board/$(BOARDDIR)/lib$(BOARD).a 109LIBS += cpu/$(CPU)/lib$(CPU).a 110ifdef SOC 111LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 112endif 113LIBS += lib_$(ARCH)/lib$(ARCH).a 114LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 115 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a 116LIBS += net/libnet.a 117LIBS += disk/libdisk.a 118LIBS += rtc/librtc.a 119LIBS += dtt/libdtt.a 120LIBS += drivers/libdrivers.a 121LIBS += drivers/sk98lin/libsk98lin.a 122LIBS += post/libpost.a post/cpu/libcpu.a 123LIBS += common/libcommon.a 124.PHONY : $(LIBS) 125 126# Add GCC lib 127PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 128 129 130# The "tools" are needed early, so put this first 131# Don't include stuff already done in $(LIBS) 132SUBDIRS = tools \ 133 examples \ 134 post \ 135 post/cpu 136.PHONY : $(SUBDIRS) 137 138######################################################################### 139######################################################################### 140 141ALL = u-boot.srec u-boot.bin System.map 142 143all: $(ALL) 144 145u-boot.hex: u-boot 146 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 147 148u-boot.srec: u-boot 149 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ 150 151u-boot.bin: u-boot 152 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 153 154u-boot.img: u-boot.bin 155 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 156 -a $(TEXT_BASE) -e 0 \ 157 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \ 158 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 159 -d $< $@ 160 161u-boot.dis: u-boot 162 $(OBJDUMP) -d $< > $@ 163 164u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) 165 UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 166 $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ 167 --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ 168 -Map u-boot.map -o u-boot 169 170$(LIBS): 171 $(MAKE) -C `dirname $@` 172 173$(SUBDIRS): 174 $(MAKE) -C $@ all 175 176gdbtools: 177 $(MAKE) -C tools/gdb || exit 1 178 179depend dep: 180 @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done 181 182tags: 183 ctags -w `find $(SUBDIRS) include \ 184 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ 185 fs/cramfs fs/fat fs/fdos fs/jffs2 \ 186 net disk rtc dtt drivers drivers/sk98lin common \ 187 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` 188 189etags: 190 etags -a `find $(SUBDIRS) include \ 191 lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ 192 fs/cramfs fs/fat fs/fdos fs/jffs2 \ 193 net disk rtc dtt drivers drivers/sk98lin common \ 194 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` 195 196System.map: u-boot 197 @$(NM) $< | \ 198 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 199 sort > System.map 200 201######################################################################### 202else 203all install u-boot u-boot.srec depend dep: 204 @echo "System not configured - see README" >&2 205 @ exit 1 206endif 207 208######################################################################### 209 210unconfig: 211 @rm -f include/config.h include/config.mk board/*/config.tmp 212 213#======================================================================== 214# PowerPC 215#======================================================================== 216 217######################################################################### 218## MPC5xx Systems 219######################################################################### 220 221canmb_config: unconfig 222 @./mkconfig -a canmb ppc mpc5xxx canmb 223 224cmi_mpc5xx_config: unconfig 225 @./mkconfig $(@:_config=) ppc mpc5xx cmi 226 227PATI_config: unconfig 228 @./mkconfig $(@:_config=) ppc mpc5xx pati mpl 229 230######################################################################### 231## MPC5xxx Systems 232######################################################################### 233 234aev_config: unconfig 235 @./mkconfig -a aev ppc mpc5xxx tqm5200 236 237cpci5200_config: unconfig 238 @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd 239 240hmi1001_config: unconfig 241 @./mkconfig hmi1001 ppc mpc5xxx hmi1001 242 243Lite5200_config \ 244Lite5200_LOWBOOT_config \ 245Lite5200_LOWBOOT08_config \ 246icecube_5200_config \ 247icecube_5200_LOWBOOT_config \ 248icecube_5200_LOWBOOT08_config \ 249icecube_5200_DDR_config \ 250icecube_5200_DDR_LOWBOOT_config \ 251icecube_5200_DDR_LOWBOOT08_config \ 252icecube_5100_config: unconfig 253 @ >include/config.h 254 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 255 { if [ "$(findstring DDR,$@)" ] ; \ 256 then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ 257 else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ 258 fi ; \ 259 echo "... with LOWBOOT configuration" ; \ 260 } 261 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 262 { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ 263 echo "... with 8 MB flash only" ; \ 264 echo "... with LOWBOOT configuration" ; \ 265 } 266 @[ -z "$(findstring DDR,$@)" ] || \ 267 { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ 268 echo "... DDR memory revision" ; \ 269 } 270 @[ -z "$(findstring 5200,$@)" ] || \ 271 { echo "#define CONFIG_MPC5200" >>include/config.h ; \ 272 echo "... with MPC5200 processor" ; \ 273 } 274 @[ -z "$(findstring 5100,$@)" ] || \ 275 { echo "#define CONFIG_MGT5100" >>include/config.h ; \ 276 echo "... with MGT5100 processor" ; \ 277 } 278 @./mkconfig -a IceCube ppc mpc5xxx icecube 279 280inka4x0_config: unconfig 281 @./mkconfig inka4x0 ppc mpc5xxx inka4x0 282 283o2dnt_config: 284 @./mkconfig -a o2dnt ppc mpc5xxx o2dnt 285 286pf5200_config: unconfig 287 @./mkconfig -a pf5200 ppc mpc5xxx pf5200 esd 288 289PM520_config \ 290PM520_DDR_config \ 291PM520_ROMBOOT_config \ 292PM520_ROMBOOT_DDR_config: unconfig 293 @ >include/config.h 294 @[ -z "$(findstring DDR,$@)" ] || \ 295 { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ 296 echo "... DDR memory revision" ; \ 297 } 298 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 299 { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ 300 echo "... booting from 8-bit flash" ; \ 301 } 302 @./mkconfig -a PM520 ppc mpc5xxx pm520 303 304MINI5200_config \ 305EVAL5200_config \ 306TOP5200_config: unconfig 307 @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h 308 @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk 309 310Total5100_config \ 311Total5200_config \ 312Total5200_lowboot_config \ 313Total5200_Rev2_config \ 314Total5200_Rev2_lowboot_config: unconfig 315 @ >include/config.h 316 @[ -z "$(findstring 5100,$@)" ] || \ 317 { echo "#define CONFIG_MGT5100" >>include/config.h ; \ 318 echo "... with MGT5100 processor" ; \ 319 } 320 @[ -z "$(findstring 5200,$@)" ] || \ 321 { echo "#define CONFIG_MPC5200" >>include/config.h ; \ 322 echo "... with MPC5200 processor" ; \ 323 } 324 @[ -n "$(findstring Rev,$@)" ] || \ 325 { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \ 326 echo "... revision 1 board" ; \ 327 } 328 @[ -z "$(findstring Rev2_,$@)" ] || \ 329 { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \ 330 echo "... revision 2 board" ; \ 331 } 332 @[ -z "$(findstring lowboot_,$@)" ] || \ 333 { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \ 334 echo "... with lowboot configuration" ; \ 335 } 336 @./mkconfig -a Total5200 ppc mpc5xxx total5200 337 338TQM5200_auto_config \ 339TQM5200_AA_config \ 340TQM5200_AB_config \ 341TQM5200_AC_config \ 342MiniFAP_config: unconfig 343 @ >include/config.h 344 @[ -z "$(findstring MiniFAP,$@)" ] || \ 345 { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ 346 echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ 347 echo "... TQM5200_AC on MiniFAP" ; \ 348 } 349 @[ -z "$(findstring AA,$@)" ] || \ 350 { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \ 351 echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \ 352 } 353 @[ -z "$(findstring AB,$@)" ] || \ 354 { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \ 355 echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \ 356 echo "... with Graphics Controller"; \ 357 } 358 @[ -z "$(findstring AC,$@)" ] || \ 359 { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ 360 echo "... with 4 MB Flash, 128 MB SDRAM" ; \ 361 echo "... with Graphics Controller"; \ 362 } 363 @[ -z "$(findstring auto,$@)" ] || \ 364 { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \ 365 echo "... with automatic CS configuration" ; \ 366 } 367 @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200 368 369spieval_config: unconfig 370 echo "#define CONFIG_CS_AUTOCONF">>include/config.h 371 echo "... with automatic CS configuration" 372 @./mkconfig -a spieval ppc mpc5xxx tqm5200 373 374######################################################################### 375## MPC8xx Systems 376######################################################################### 377 378Adder_config \ 379Adder87x_config \ 380AdderII_config \ 381 : unconfig 382 $(if $(findstring AdderII,$@), \ 383 @echo "#define CONFIG_MPC852T" > include/config.h) 384 @./mkconfig -a Adder ppc mpc8xx adder 385 386ADS860_config \ 387FADS823_config \ 388FADS850SAR_config \ 389MPC86xADS_config \ 390MPC885ADS_config \ 391FADS860T_config: unconfig 392 @./mkconfig $(@:_config=) ppc mpc8xx fads 393 394AMX860_config : unconfig 395 @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel 396 397c2mon_config: unconfig 398 @./mkconfig $(@:_config=) ppc mpc8xx c2mon 399 400CCM_config: unconfig 401 @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens 402 403cogent_mpc8xx_config: unconfig 404 @./mkconfig $(@:_config=) ppc mpc8xx cogent 405 406ELPT860_config: unconfig 407 @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX 408 409ESTEEM192E_config: unconfig 410 @./mkconfig $(@:_config=) ppc mpc8xx esteem192e 411 412ETX094_config : unconfig 413 @./mkconfig $(@:_config=) ppc mpc8xx etx094 414 415FLAGADM_config: unconfig 416 @./mkconfig $(@:_config=) ppc mpc8xx flagadm 417 418xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 419 420GEN860T_SC_config \ 421GEN860T_config: unconfig 422 @ >include/config.h 423 @[ -z "$(findstring _SC,$@)" ] || \ 424 { echo "#define CONFIG_SC" >>include/config.h ; \ 425 echo "With reduced H/W feature set (SC)..." ; \ 426 } 427 @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 428 429GENIETV_config: unconfig 430 @./mkconfig $(@:_config=) ppc mpc8xx genietv 431 432GTH_config: unconfig 433 @./mkconfig $(@:_config=) ppc mpc8xx gth 434 435hermes_config : unconfig 436 @./mkconfig $(@:_config=) ppc mpc8xx hermes 437 438HMI10_config : unconfig 439 @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx 440 441IAD210_config: unconfig 442 @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens 443 444xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 445 446ICU862_100MHz_config \ 447ICU862_config: unconfig 448 @ >include/config.h 449 @[ -z "$(findstring _100MHz,$@)" ] || \ 450 { echo "#define CONFIG_100MHz" >>include/config.h ; \ 451 echo "... with 100MHz system clock" ; \ 452 } 453 @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 454 455IP860_config : unconfig 456 @./mkconfig $(@:_config=) ppc mpc8xx ip860 457 458IVML24_256_config \ 459IVML24_128_config \ 460IVML24_config: unconfig 461 @ >include/config.h 462 @[ -z "$(findstring IVML24_config,$@)" ] || \ 463 { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ 464 } 465 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 466 { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ 467 } 468 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 469 { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ 470 } 471 @./mkconfig -a IVML24 ppc mpc8xx ivm 472 473IVMS8_256_config \ 474IVMS8_128_config \ 475IVMS8_config: unconfig 476 @ >include/config.h 477 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 478 { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ 479 } 480 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 481 { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ 482 } 483 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 484 { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ 485 } 486 @./mkconfig -a IVMS8 ppc mpc8xx ivm 487 488KUP4K_config : unconfig 489 @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup 490 491KUP4X_config : unconfig 492 @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup 493 494LANTEC_config : unconfig 495 @./mkconfig $(@:_config=) ppc mpc8xx lantec 496 497lwmon_config: unconfig 498 @./mkconfig $(@:_config=) ppc mpc8xx lwmon 499 500MBX_config \ 501MBX860T_config: unconfig 502 @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx 503 504MHPC_config: unconfig 505 @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec 506 507MVS1_config : unconfig 508 @./mkconfig $(@:_config=) ppc mpc8xx mvs1 509 510xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 511 512NETVIA_V2_config \ 513NETVIA_config: unconfig 514 @ >include/config.h 515 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 516 { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \ 517 echo "... Version 1" ; \ 518 } 519 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 520 { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \ 521 echo "... Version 2" ; \ 522 } 523 @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 524 525xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 526 527NETPHONE_V2_config \ 528NETPHONE_config: unconfig 529 @ >include/config.h 530 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 531 { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \ 532 } 533 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 534 { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \ 535 } 536 @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 537 538xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 539 540NETTA_ISDN_6412_SWAPHOOK_config \ 541NETTA_ISDN_SWAPHOOK_config \ 542NETTA_6412_SWAPHOOK_config \ 543NETTA_SWAPHOOK_config \ 544NETTA_ISDN_6412_config \ 545NETTA_ISDN_config \ 546NETTA_6412_config \ 547NETTA_config: unconfig 548 @ >include/config.h 549 @[ -z "$(findstring ISDN_,$@)" ] || \ 550 { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \ 551 } 552 @[ -n "$(findstring ISDN_,$@)" ] || \ 553 { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \ 554 } 555 @[ -z "$(findstring 6412_,$@)" ] || \ 556 { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \ 557 } 558 @[ -n "$(findstring 6412_,$@)" ] || \ 559 { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \ 560 } 561 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 562 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \ 563 } 564 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 565 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \ 566 } 567 @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta 568 569xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 570 571NETTA2_V2_config \ 572NETTA2_config: unconfig 573 @ >include/config.h 574 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 575 { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \ 576 } 577 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 578 { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \ 579 } 580 @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 581 582NC650_config: unconfig 583 @./mkconfig $(@:_config=) ppc mpc8xx nc650 584 585NX823_config: unconfig 586 @./mkconfig $(@:_config=) ppc mpc8xx nx823 587 588pcu_e_config: unconfig 589 @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens 590 591QS850_config: unconfig 592 @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc 593 594QS823_config: unconfig 595 @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc 596 597QS860T_config: unconfig 598 @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc 599 600quantum_config: unconfig 601 @./mkconfig $(@:_config=) ppc mpc8xx quantum 602 603R360MPI_config: unconfig 604 @./mkconfig $(@:_config=) ppc mpc8xx r360mpi 605 606RBC823_config: unconfig 607 @./mkconfig $(@:_config=) ppc mpc8xx rbc823 608 609RPXClassic_config: unconfig 610 @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic 611 612RPXlite_config: unconfig 613 @./mkconfig $(@:_config=) ppc mpc8xx RPXlite 614 615RPXlite_DW_64_config \ 616RPXlite_DW_LCD_config \ 617RPXlite_DW_64_LCD_config \ 618RPXlite_DW_NVRAM_config \ 619RPXlite_DW_NVRAM_64_config \ 620RPXlite_DW_NVRAM_LCD_config \ 621RPXlite_DW_NVRAM_64_LCD_config \ 622RPXlite_DW_config: unconfig 623 @ >include/config.h 624 @[ -z "$(findstring _64,$@)" ] || \ 625 { echo "#define RPXlite_64MHz" >>include/config.h ; \ 626 echo "... with 64MHz system clock ..."; \ 627 } 628 @[ -z "$(findstring _LCD,$@)" ] || \ 629 { echo "#define CONFIG_LCD" >>include/config.h ; \ 630 echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ 631 echo "... with LCD display ..."; \ 632 } 633 @[ -z "$(findstring _NVRAM,$@)" ] || \ 634 { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \ 635 echo "... with ENV in NVRAM ..."; \ 636 } 637 @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw 638 639rmu_config: unconfig 640 @./mkconfig $(@:_config=) ppc mpc8xx rmu 641 642RRvision_config: unconfig 643 @./mkconfig $(@:_config=) ppc mpc8xx RRvision 644 645RRvision_LCD_config: unconfig 646 @echo "#define CONFIG_LCD" >include/config.h 647 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h 648 @./mkconfig -a RRvision ppc mpc8xx RRvision 649 650SM850_config : unconfig 651 @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx 652 653SPD823TS_config: unconfig 654 @./mkconfig $(@:_config=) ppc mpc8xx spd8xx 655 656stxxtc_config: unconfig 657 @./mkconfig $(@:_config=) ppc mpc8xx stxxtc 658 659svm_sc8xx_config: unconfig 660 @ >include/config.h 661 @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx 662 663SXNI855T_config: unconfig 664 @./mkconfig $(@:_config=) ppc mpc8xx sixnet 665 666# EMK MPC8xx based modules 667TOP860_config: unconfig 668 @./mkconfig $(@:_config=) ppc mpc8xx top860 emk 669 670# Play some tricks for configuration selection 671# Only 855 and 860 boards may come with FEC 672# and only 823 boards may have LCD support 673xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 674 675FPS850L_config \ 676FPS860L_config \ 677NSCU_config \ 678TQM823L_config \ 679TQM823L_LCD_config \ 680TQM850L_config \ 681TQM855L_config \ 682TQM860L_config \ 683TQM862L_config \ 684TQM823M_config \ 685TQM850M_config \ 686TQM855M_config \ 687TQM860M_config \ 688TQM862M_config \ 689TQM866M_config: unconfig 690 @ >include/config.h 691 @[ -z "$(findstring _LCD,$@)" ] || \ 692 { echo "#define CONFIG_LCD" >>include/config.h ; \ 693 echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ 694 echo "... with LCD display" ; \ 695 } 696 @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx 697 698TTTech_config: unconfig 699 @echo "#define CONFIG_LCD" >include/config.h 700 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h 701 @./mkconfig -a TQM823L ppc mpc8xx tqm8xx 702 703uc100_config : unconfig 704 @./mkconfig $(@:_config=) ppc mpc8xx uc100 705 706v37_config: unconfig 707 @echo "#define CONFIG_LCD" >include/config.h 708 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h 709 @./mkconfig $(@:_config=) ppc mpc8xx v37 710 711wtk_config: unconfig 712 @echo "#define CONFIG_LCD" >include/config.h 713 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h 714 @./mkconfig -a TQM823L ppc mpc8xx tqm8xx 715 716######################################################################### 717## PPC4xx Systems 718######################################################################### 719xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 720 721ADCIOP_config: unconfig 722 @./mkconfig $(@:_config=) ppc ppc4xx adciop esd 723 724APC405_config: unconfig 725 @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd 726 727AR405_config: unconfig 728 @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd 729 730ASH405_config: unconfig 731 @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd 732 733bamboo_config: unconfig 734 @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc 735 736bubinga_config: unconfig 737 @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc 738 739CANBT_config: unconfig 740 @./mkconfig $(@:_config=) ppc ppc4xx canbt esd 741 742CATcenter_config \ 743CATcenter_25_config \ 744CATcenter_33_config: unconfig 745 @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h 746 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h 747 @[ -z "$(findstring _25,$@)" ] || \ 748 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ 749 echo "SysClk = 25MHz" ; \ 750 } 751 @[ -z "$(findstring _33,$@)" ] || \ 752 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ 753 echo "SysClk = 33MHz" ; \ 754 } 755 @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 756 757CPCI2DP_config: unconfig 758 @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd 759 760CPCI405_config \ 761CPCI4052_config \ 762CPCI405DT_config \ 763CPCI405AB_config: unconfig 764 @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd 765 @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk 766 767CPCI440_config: unconfig 768 @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd 769 770CPCIISER4_config: unconfig 771 @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd 772 773CRAYL1_config: unconfig 774 @./mkconfig $(@:_config=) ppc ppc4xx L1 cray 775 776csb272_config: unconfig 777 @./mkconfig $(@:_config=) ppc ppc4xx csb272 778 779csb472_config: unconfig 780 @./mkconfig $(@:_config=) ppc ppc4xx csb472 781 782DASA_SIM_config: unconfig 783 @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd 784 785DP405_config: unconfig 786 @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd 787 788DU405_config: unconfig 789 @./mkconfig $(@:_config=) ppc ppc4xx du405 esd 790 791ebony_config: unconfig 792 @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc 793 794ERIC_config: unconfig 795 @./mkconfig $(@:_config=) ppc ppc4xx eric 796 797EXBITGEN_config: unconfig 798 @./mkconfig $(@:_config=) ppc ppc4xx exbitgen 799 800G2000_config: unconfig 801 @./mkconfig $(@:_config=) ppc ppc4xx g2000 802 803HH405_config: unconfig 804 @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd 805 806HUB405_config: unconfig 807 @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd 808 809JSE_config: unconfig 810 @./mkconfig $(@:_config=) ppc ppc4xx jse 811 812KAREF_config: unconfig 813 @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst 814 815METROBOX_config: unconfig 816 @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst 817 818MIP405_config: unconfig 819 @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl 820 821MIP405T_config: unconfig 822 @echo "#define CONFIG_MIP405T" >include/config.h 823 @echo "Enable subset config for MIP405T" 824 @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl 825 826ML2_config: unconfig 827 @./mkconfig $(@:_config=) ppc ppc4xx ml2 828 829ml300_config: unconfig 830 @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx 831 832ocotea_config: unconfig 833 @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc 834 835OCRTC_config \ 836ORSG_config: unconfig 837 @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd 838 839PCI405_config: unconfig 840 @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd 841 842PIP405_config: unconfig 843 @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl 844 845PLU405_config: unconfig 846 @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd 847 848PMC405_config: unconfig 849 @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd 850 851PPChameleonEVB_config \ 852PPChameleonEVB_BA_25_config \ 853PPChameleonEVB_ME_25_config \ 854PPChameleonEVB_HI_25_config \ 855PPChameleonEVB_BA_33_config \ 856PPChameleonEVB_ME_33_config \ 857PPChameleonEVB_HI_33_config: unconfig 858 @ >include/config.h 859 @[ -z "$(findstring EVB_BA,$@)" ] || \ 860 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \ 861 echo "... BASIC model" ; \ 862 } 863 @[ -z "$(findstring EVB_ME,$@)" ] || \ 864 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \ 865 echo "... MEDIUM model" ; \ 866 } 867 @[ -z "$(findstring EVB_HI,$@)" ] || \ 868 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \ 869 echo "... HIGH-END model" ; \ 870 } 871 @[ -z "$(findstring _25,$@)" ] || \ 872 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ 873 echo "SysClk = 25MHz" ; \ 874 } 875 @[ -z "$(findstring _33,$@)" ] || \ 876 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ 877 echo "SysClk = 33MHz" ; \ 878 } 879 @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 880 881sbc405_config: unconfig 882 @./mkconfig $(@:_config=) ppc ppc4xx sbc405 883 884sycamore_config: unconfig 885 @echo "Configuring for sycamore board as subset of walnut..." 886 @./mkconfig -a walnut ppc ppc4xx walnut amcc 887 888VOH405_config: unconfig 889 @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd 890 891VOM405_config: unconfig 892 @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd 893 894W7OLMC_config \ 895W7OLMG_config: unconfig 896 @./mkconfig $(@:_config=) ppc ppc4xx w7o 897 898walnut_config: unconfig 899 @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc 900 901WUH405_config: unconfig 902 @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd 903 904XPEDITE1K_config: unconfig 905 @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k 906 907yosemite_config: unconfig 908 @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc 909 910yellowstone_config: unconfig 911 @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc 912 913######################################################################### 914## MPC8220 Systems 915######################################################################### 916 917Alaska8220_config \ 918Yukon8220_config: unconfig 919 @./mkconfig $(@:_config=) ppc mpc8220 alaska 920 921sorcery_config: unconfig 922 @./mkconfig $(@:_config=) ppc mpc8220 sorcery 923 924######################################################################### 925## MPC824x Systems 926######################################################################### 927xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 928 929A3000_config: unconfig 930 @./mkconfig $(@:_config=) ppc mpc824x a3000 931 932barco_config: unconfig 933 @./mkconfig $(@:_config=) ppc mpc824x barco 934 935BMW_config: unconfig 936 @./mkconfig $(@:_config=) ppc mpc824x bmw 937 938CPC45_config \ 939CPC45_ROMBOOT_config: unconfig 940 @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 941 @cd ./include ; \ 942 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 943 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 944 echo "... booting from 8-bit flash" ; \ 945 else \ 946 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 947 echo "... booting from 64-bit flash" ; \ 948 fi; \ 949 echo "export CONFIG_BOOT_ROM" >> config.mk; 950 951CU824_config: unconfig 952 @./mkconfig $(@:_config=) ppc mpc824x cu824 953 954debris_config: unconfig 955 @./mkconfig $(@:_config=) ppc mpc824x debris etin 956 957eXalion_config: unconfig 958 @./mkconfig $(@:_config=) ppc mpc824x eXalion 959 960HIDDEN_DRAGON_config: unconfig 961 @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon 962 963MOUSSE_config: unconfig 964 @./mkconfig $(@:_config=) ppc mpc824x mousse 965 966MUSENKI_config: unconfig 967 @./mkconfig $(@:_config=) ppc mpc824x musenki 968 969MVBLUE_config: unconfig 970 @./mkconfig $(@:_config=) ppc mpc824x mvblue 971 972OXC_config: unconfig 973 @./mkconfig $(@:_config=) ppc mpc824x oxc 974 975PN62_config: unconfig 976 @./mkconfig $(@:_config=) ppc mpc824x pn62 977 978Sandpoint8240_config: unconfig 979 @./mkconfig $(@:_config=) ppc mpc824x sandpoint 980 981Sandpoint8245_config: unconfig 982 @./mkconfig $(@:_config=) ppc mpc824x sandpoint 983 984sbc8240_config: unconfig 985 @./mkconfig $(@:_config=) ppc mpc824x sbc8240 986 987SL8245_config: unconfig 988 @./mkconfig $(@:_config=) ppc mpc824x sl8245 989 990utx8245_config: unconfig 991 @./mkconfig $(@:_config=) ppc mpc824x utx8245 992 993cobra5272_config : unconfig 994 @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272 995 996######################################################################### 997## MPC8260 Systems 998######################################################################### 999 1000atc_config: unconfig 1001 @./mkconfig $(@:_config=) ppc mpc8260 atc 1002 1003cogent_mpc8260_config: unconfig 1004 @./mkconfig $(@:_config=) ppc mpc8260 cogent 1005 1006CPU86_config \ 1007CPU86_ROMBOOT_config: unconfig 1008 @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 1009 @cd ./include ; \ 1010 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1011 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1012 echo "... booting from 8-bit flash" ; \ 1013 else \ 1014 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1015 echo "... booting from 64-bit flash" ; \ 1016 fi; \ 1017 echo "export CONFIG_BOOT_ROM" >> config.mk; 1018 1019CPU87_config \ 1020CPU87_ROMBOOT_config: unconfig 1021 @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87 1022 @cd ./include ; \ 1023 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1024 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1025 echo "... booting from 8-bit flash" ; \ 1026 else \ 1027 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1028 echo "... booting from 64-bit flash" ; \ 1029 fi; \ 1030 echo "export CONFIG_BOOT_ROM" >> config.mk; 1031 1032ep8248_config \ 1033ep8248E_config : unconfig 1034 @./mkconfig ep8248 ppc mpc8260 ep8248 1035 1036ep8260_config: unconfig 1037 @./mkconfig $(@:_config=) ppc mpc8260 ep8260 1038 1039gw8260_config: unconfig 1040 @./mkconfig $(@:_config=) ppc mpc8260 gw8260 1041 1042hymod_config: unconfig 1043 @./mkconfig $(@:_config=) ppc mpc8260 hymod 1044 1045IDS8247_config: unconfig 1046 @./mkconfig $(@:_config=) ppc mpc8260 ids8247 1047 1048IPHASE4539_config: unconfig 1049 @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 1050 1051ISPAN_config \ 1052ISPAN_REVB_config: unconfig 1053 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1054 echo "#define CFG_REV_B" > include/config.h ; \ 1055 fi 1056 @./mkconfig -a ISPAN ppc mpc8260 ispan 1057 1058MPC8260ADS_config \ 1059MPC8260ADS_lowboot_config \ 1060MPC8260ADS_33MHz_config \ 1061MPC8260ADS_33MHz_lowboot_config \ 1062MPC8260ADS_40MHz_config \ 1063MPC8260ADS_40MHz_lowboot_config \ 1064MPC8272ADS_config \ 1065MPC8272ADS_lowboot_config \ 1066PQ2FADS_config \ 1067PQ2FADS_lowboot_config \ 1068PQ2FADS-VR_config \ 1069PQ2FADS-VR_lowboot_config \ 1070PQ2FADS-ZU_config \ 1071PQ2FADS-ZU_lowboot_config \ 1072PQ2FADS-ZU_66MHz_config \ 1073PQ2FADS-ZU_66MHz_lowboot_config \ 1074 : unconfig 1075 $(if $(findstring PQ2FADS,$@), \ 1076 @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \ 1077 @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h) 1078 $(if $(findstring MHz,$@), \ 1079 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \ 1080 $(if $(findstring VR,$@), \ 1081 @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h)) 1082 @[ -z "$(findstring lowboot_,$@)" ] || \ 1083 { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \ 1084 echo "... with lowboot configuration" ; \ 1085 } 1086 @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads 1087 1088MPC8266ADS_config: unconfig 1089 @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads 1090 1091# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1092PM825_config \ 1093PM825_ROMBOOT_config \ 1094PM825_BIGFLASH_config \ 1095PM825_ROMBOOT_BIGFLASH_config \ 1096PM826_config \ 1097PM826_ROMBOOT_config \ 1098PM826_BIGFLASH_config \ 1099PM826_ROMBOOT_BIGFLASH_config: unconfig 1100 @if [ "$(findstring PM825_,$@)" ] ; then \ 1101 echo "#define CONFIG_PCI" >include/config.h ; \ 1102 else \ 1103 >include/config.h ; \ 1104 fi 1105 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1106 echo "... booting from 8-bit flash" ; \ 1107 echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ 1108 echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ 1109 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1110 echo "... with 32 MB Flash" ; \ 1111 echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ 1112 fi; \ 1113 else \ 1114 echo "... booting from 64-bit flash" ; \ 1115 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1116 echo "... with 32 MB Flash" ; \ 1117 echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ 1118 echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \ 1119 else \ 1120 echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \ 1121 fi; \ 1122 fi 1123 @./mkconfig -a PM826 ppc mpc8260 pm826 1124 1125PM828_config \ 1126PM828_PCI_config \ 1127PM828_ROMBOOT_config \ 1128PM828_ROMBOOT_PCI_config: unconfig 1129 @if [ -z "$(findstring _PCI_,$@)" ] ; then \ 1130 echo "#define CONFIG_PCI" >>include/config.h ; \ 1131 echo "... with PCI enabled" ; \ 1132 else \ 1133 >include/config.h ; \ 1134 fi 1135 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1136 echo "... booting from 8-bit flash" ; \ 1137 echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ 1138 echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ 1139 fi 1140 @./mkconfig -a PM828 ppc mpc8260 pm828 1141 1142ppmc8260_config: unconfig 1143 @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 1144 1145Rattler8248_config \ 1146Rattler_config: unconfig 1147 $(if $(findstring 8248,$@), \ 1148 @echo "#define CONFIG_MPC8248" > include/config.h) 1149 @./mkconfig -a Rattler ppc mpc8260 rattler 1150 1151RPXsuper_config: unconfig 1152 @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper 1153 1154rsdproto_config: unconfig 1155 @./mkconfig $(@:_config=) ppc mpc8260 rsdproto 1156 1157sacsng_config: unconfig 1158 @./mkconfig $(@:_config=) ppc mpc8260 sacsng 1159 1160sbc8260_config: unconfig 1161 @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 1162 1163SCM_config: unconfig 1164 @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens 1165 1166TQM8255_AA_config \ 1167TQM8260_AA_config \ 1168TQM8260_AB_config \ 1169TQM8260_AC_config \ 1170TQM8260_AD_config \ 1171TQM8260_AE_config \ 1172TQM8260_AF_config \ 1173TQM8260_AG_config \ 1174TQM8260_AH_config \ 1175TQM8265_AA_config: unconfig 1176 @case "$@" in \ 1177 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1178 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1179 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1180 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1181 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1182 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1183 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1184 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1185 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1186 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1187 esac; \ 1188 >include/config.h ; \ 1189 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1190 echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \ 1191 fi; \ 1192 echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \ 1193 echo "... with $${CFREQ}MHz system clock" ; \ 1194 if [ "$${CACHE}" == "yes" ] ; then \ 1195 echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ 1196 echo "... with L2 Cache support" ; \ 1197 else \ 1198 echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ 1199 echo "... without L2 Cache support" ; \ 1200 fi; \ 1201 if [ "$${BMODE}" == "60x" ] ; then \ 1202 echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \ 1203 echo "... with 60x Bus Mode" ; \ 1204 else \ 1205 echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \ 1206 echo "... without 60x Bus Mode" ; \ 1207 fi 1208 @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 1209 1210VoVPN-GW_66MHz_config \ 1211VoVPN-GW_100MHz_config: unconfig 1212 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h 1213 @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 1214 1215ZPC1900_config: unconfig 1216 @./mkconfig $(@:_config=) ppc mpc8260 zpc1900 1217 1218#======================================================================== 1219# M68K 1220#======================================================================== 1221######################################################################### 1222## Coldfire 1223######################################################################### 1224 1225M5272C3_config : unconfig 1226 @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3 1227 1228M5282EVB_config : unconfig 1229 @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb 1230 1231TASREG_config : unconfig 1232 @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd 1233 1234######################################################################### 1235## MPC83xx Systems 1236######################################################################### 1237 1238MPC8349ADS_config: unconfig 1239 @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads 1240 1241######################################################################### 1242## MPC85xx Systems 1243######################################################################### 1244 1245MPC8540ADS_config: unconfig 1246 @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads 1247 1248MPC8540EVAL_config \ 1249MPC8540EVAL_33_config \ 1250MPC8540EVAL_66_config \ 1251MPC8540EVAL_33_slave_config \ 1252MPC8540EVAL_66_slave_config: unconfig 1253 @echo "" >include/config.h ; \ 1254 if [ "$(findstring _33_,$@)" ] ; then \ 1255 echo -n "... 33 MHz PCI" ; \ 1256 else \ 1257 echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \ 1258 echo -n "... 66 MHz PCI" ; \ 1259 fi ; \ 1260 if [ "$(findstring _slave_,$@)" ] ; then \ 1261 echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \ 1262 echo " slave" ; \ 1263 else \ 1264 echo " host" ; \ 1265 fi 1266 @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval 1267 1268MPC8560ADS_config: unconfig 1269 @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads 1270 1271MPC8541CDS_config: unconfig 1272 @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds 1273 1274MPC8548CDS_config: unconfig 1275 @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds 1276 1277MPC8555CDS_config: unconfig 1278 @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds 1279 1280PM854_config: unconfig 1281 @./mkconfig $(@:_config=) ppc mpc85xx pm854 1282 1283PM856_config: unconfig 1284 @./mkconfig $(@:_config=) ppc mpc85xx pm856 1285 1286sbc8540_config \ 1287sbc8540_33_config \ 1288sbc8540_66_config: unconfig 1289 @if [ "$(findstring _66_,$@)" ] ; then \ 1290 echo "#define CONFIG_PCI_66" >>include/config.h ; \ 1291 echo "... 66 MHz PCI" ; \ 1292 else \ 1293 >include/config.h ; \ 1294 echo "... 33 MHz PCI" ; \ 1295 fi 1296 @./mkconfig -a SBC8540 ppc mpc85xx sbc8560 1297 1298sbc8560_config \ 1299sbc8560_33_config \ 1300sbc8560_66_config: unconfig 1301 @if [ "$(findstring _66_,$@)" ] ; then \ 1302 echo "#define CONFIG_PCI_66" >>include/config.h ; \ 1303 echo "... 66 MHz PCI" ; \ 1304 else \ 1305 >include/config.h ; \ 1306 echo "... 33 MHz PCI" ; \ 1307 fi 1308 @./mkconfig -a sbc8560 ppc mpc85xx sbc8560 1309 1310stxgp3_config: unconfig 1311 @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 1312 1313TQM8540_config: unconfig 1314 @./mkconfig $(@:_config=) ppc mpc85xx tqm8540 1315 1316TQM8560_config: unconfig 1317 @./mkconfig $(@:_config=) ppc mpc85xx tqm8560 1318 1319######################################################################### 1320## 74xx/7xx Systems 1321######################################################################### 1322 1323AmigaOneG3SE_config: unconfig 1324 @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 1325 1326BAB7xx_config: unconfig 1327 @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec 1328 1329CPCI750_config: unconfig 1330 @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd 1331 1332DB64360_config: unconfig 1333 @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell 1334 1335DB64460_config: unconfig 1336 @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell 1337 1338ELPPC_config: unconfig 1339 @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec 1340 1341EVB64260_config \ 1342EVB64260_750CX_config: unconfig 1343 @./mkconfig EVB64260 ppc 74xx_7xx evb64260 1344 1345P3G4_config: unconfig 1346 @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 1347 1348PCIPPC2_config \ 1349PCIPPC6_config: unconfig 1350 @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 1351 1352ZUMA_config: unconfig 1353 @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 1354 1355#======================================================================== 1356# ARM 1357#======================================================================== 1358######################################################################### 1359## StrongARM Systems 1360######################################################################### 1361 1362assabet_config : unconfig 1363 @./mkconfig $(@:_config=) arm sa1100 assabet 1364 1365dnp1110_config : unconfig 1366 @./mkconfig $(@:_config=) arm sa1100 dnp1110 1367 1368gcplus_config : unconfig 1369 @./mkconfig $(@:_config=) arm sa1100 gcplus 1370 1371lart_config : unconfig 1372 @./mkconfig $(@:_config=) arm sa1100 lart 1373 1374shannon_config : unconfig 1375 @./mkconfig $(@:_config=) arm sa1100 shannon 1376 1377######################################################################### 1378## ARM92xT Systems 1379######################################################################### 1380 1381xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 1382 1383xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 1384 1385xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 1386 1387at91rm9200dk_config : unconfig 1388 @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 1389 1390cmc_pu2_config : unconfig 1391 @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 1392 1393######################################################################## 1394## ARM Integrator boards 1395## There are two variants /AP && /CP 1396## - many different core modules (CMs) can be used 1397## - some share characteristics 1398## Those without specific cpu support can still use U-Boot 1399## provided the ARM boot monitor (or similar) runs before U-Boot 1400## to set up the platform e.g. map writeable memory to 0x00000000 1401## setup MMU, setup caches etc. 1402## Ported cores are:- 1403## ARM926EJ-S 1404## ARM946E-S 1405## 1406######################################################################## 1407xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2)) 1408xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2)) 1409######################################################################### 1410## Integrator/AP 1411######################################################################### 1412integratorap_config : unconfig 1413 @echo -n "/* Integrator configuration implied " > tmp.fil; \ 1414 echo " by Makefile target */" >> tmp.fil; \ 1415 echo >> tmp.fil 1416 @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ 1417 echo " /* Integrator board */" >> tmp.fil; \ 1418 echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \ 1419 echo " 1 /* Integrator/AP */" >> tmp.fil; \ 1420 echo "/* Core module not defined */" >> tmp.fil; \ 1421 echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \ 1422 echo -n " /* Integrator core module " >> tmp.fil; \ 1423 echo "with unknown core */" >> tmp.fil; \ 1424 cpu=arm_intcm; \ 1425 mv tmp.fil ./include/config.h; \ 1426 ubootlds=board/integratorap/u-boot.lds; \ 1427 sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ 1428 $$ubootlds > $$ubootlds.tmp; \ 1429 mv -f $$ubootlds.tmp $$ubootlds; \ 1430 ./mkconfig -a integratorap arm arm_intcm integratorap; 1431 1432integratorap_CM720T_config integratorap_CM7TDMI_config \ 1433integratorap_CM920T_config integratorap_CM920T_ETM_config \ 1434integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \ 1435integratorap_CM940T_config integratorap_CM946E_S_config \ 1436integratorap_CM966E_S_config integratorap_CM10200E_config \ 1437integratorap_CM10220E_config integratorap_CM1026EJ_S_config \ 1438integratorap_CM1136JF_S_config : unconfig 1439 @echo -n "/* Integrator configuration implied " > tmp.fil; \ 1440 echo " by Makefile target */" >> tmp.fil; \ 1441 echo >> tmp.fil 1442 @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ 1443 echo " /* Integrator board */" >> tmp.fil; \ 1444 echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \ 1445 echo " 1 /* Integrator/AP */" >> tmp.fil; \ 1446 cm=$(call xtract_int_cm,ap,$@); \ 1447 echo -n "#define CONFIG_$$cm " >> tmp.fil; \ 1448 echo " /* core module */" >> tmp.fil; \ 1449 case $$cm in \ 1450 CM920T) \ 1451 echo -n "#define CONFIG_ARM920" >> tmp.fil; \ 1452 echo -n "T 1 /* CPU" >> tmp.fil; \ 1453 echo -n " core is ARM920T" >> tmp.fil; \ 1454 echo " */" >> tmp.fil; \ 1455 cpu=arm920t;; \ 1456 CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \ 1457 echo -n "EJ_S 1 /* CPU" >> tmp.fil; \ 1458 echo -n " core is ARM926EJ-S" >> tmp.fil; \ 1459 echo " */" >> tmp.fil; \ 1460 cpu=arm926ejs;; \ 1461 CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \ 1462 echo -n "E_S 1 /* CPU" >> tmp.fil; \ 1463 echo -n " core is ARM946E-S" >> tmp.fil; \ 1464 echo " */" >> tmp.fil; \ 1465 cpu=arm946es;; \ 1466 *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \ 1467 echo -n "TCM 1 /* Int" >> tmp.fil; \ 1468 echo -n "egrator core module w" >> tmp.fil; \ 1469 echo -n "ith unported core" >> tmp.fil; \ 1470 echo " */" >> tmp.fil; \ 1471 cpu=arm_intcm;; \ 1472 esac; \ 1473 mv tmp.fil ./include/config.h; \ 1474 ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \ 1475 sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ 1476 $$ubootlds > $$ubootlds.tmp; \ 1477 mv -f $$ubootlds.tmp $$ubootlds; \ 1478 ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \ 1479 $(call xtract_int_board,ap,$@); 1480 1481######################################################################### 1482## Integrator/CP 1483######################################################################### 1484integratorcp_config : unconfig 1485 @echo -n "/* Integrator configuration implied " > tmp.fil; \ 1486 echo " by Makefile target */" >> tmp.fil; \ 1487 echo >> tmp.fil 1488 @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ 1489 echo " /* Integrator board */" >> tmp.fil; \ 1490 echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \ 1491 echo " 1 /* Integrator/CP */" >> tmp.fil; \ 1492 echo "/* Core module not defined */" >> tmp.fil; \ 1493 echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \ 1494 echo -n " /* Integrator core module " >> tmp.fil; \ 1495 echo "with unknown core */" >> tmp.fil; \ 1496 cpu=arm_intcm; \ 1497 echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil; \ 1498 echo -n " /* CM may not have " >> tmp.fil; \ 1499 echo "multiple SSRAM mapping */" >> tmp.fil; \ 1500 echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil; \ 1501 echo -n " /* CM may not support SPD " >> tmp.fil; \ 1502 echo "query */" >> tmp.fil; \ 1503 echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil; \ 1504 echo -n " /* CM may not support " >> tmp.fil; \ 1505 echo "remapping */" >> tmp.fil; \ 1506 echo -n "#undef CONFIG_CM_INIT " >> tmp.fil; \ 1507 echo -n " /* CM may not have " >> tmp.fil; \ 1508 echo "initialization reg */" >> tmp.fil; \ 1509 echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil; \ 1510 echo -n " /* CM may not have TCRAM */" >> tmp.fil; \ 1511 mv tmp.fil ./include/config.h; \ 1512 ubootlds=board/integratorcp/u-boot.lds; \ 1513 sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ 1514 $$ubootlds > $$ubootlds.tmp; \ 1515 mv -f $$ubootlds.tmp $$ubootlds; \ 1516 ./mkconfig -a integratorcp arm arm_intcm integratorcp; 1517 1518integratorcp_CM920T_config integratorcp_CM920T_ETM_config \ 1519integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \ 1520integratorcp_CM940T_config integratorcp_CM946E_S_config \ 1521integratorcp_CM966E_S_config integratorcp_CM10200E_config \ 1522integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \ 1523integratorcp_CM1136JF_S_config : unconfig 1524 @echo -n "/* Integrator configuration implied " > tmp.fil; \ 1525 echo " by Makefile target */" >> tmp.fil; \ 1526 echo >> tmp.fil 1527 @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ 1528 echo " /* Integrator board */" >> tmp.fil; \ 1529 echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \ 1530 echo " 1 /* Integrator/CP */" >> tmp.fil; \ 1531 cm=$(call xtract_int_cm,cp,$@); \ 1532 echo -n "#define CONFIG_$$cm " >> tmp.fil; \ 1533 echo " /* core module */" >> tmp.fil; \ 1534 echo "/* $$cm core module */" >> tmp.fil; \ 1535 case $$cm in \ 1536 CM920T) echo -n "#define CONFIG_ARM920" >> tmp.fil; \ 1537 echo -n "T 1 /* CPU" >> tmp.fil; \ 1538 echo -n " core is ARM920T" >> tmp.fil; \ 1539 echo " */" >> tmp.fil; \ 1540 cpu=arm920t;; \ 1541 CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \ 1542 echo -n "E_S 1 /* CPU" >> tmp.fil; \ 1543 echo -n " core is ARM946E-S" >> tmp.fil; \ 1544 echo " */" >> tmp.fil; \ 1545 cpu=arm946es;; \ 1546 CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \ 1547 echo -n "EJ_S 1 /* CPU" >> tmp.fil; \ 1548 echo -n " core is ARM926EJ-S" >> tmp.fil; \ 1549 echo " */" >> tmp.fil; \ 1550 cpu=arm926ejs;; \ 1551 *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \ 1552 echo -n "TCM 1 /* Int" >> tmp.fil; \ 1553 echo -n "egrator core module w" >> tmp.fil; \ 1554 echo -n "ith unported core" >> tmp.fil; \ 1555 echo " */" >> tmp.fil; \ 1556 cpu=arm_intcm;; \ 1557 esac; \ 1558 mv tmp.fil ./include/config.h; \ 1559 ubootlds=board/$(call xtract_int_board,cp,$@)/u-boot.lds; \ 1560 sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ 1561 $$ubootlds > $$ubootlds.tmp; \ 1562 mv -f $$ubootlds.tmp $$ubootlds; \ 1563 ./mkconfig -a $(call xtract_int_board,cp,$@) arm $$cpu \ 1564 $(call xtract_int_board,cp,$@); 1565 1566lpd7a400_config \ 1567lpd7a404_config: unconfig 1568 @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x 1569 1570mx1ads_config : unconfig 1571 @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx 1572 1573mx1fs2_config : unconfig 1574 @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx 1575 1576omap1510inn_config : unconfig 1577 @./mkconfig $(@:_config=) arm arm925t omap1510inn 1578 1579omap5912osk_config : unconfig 1580 @./mkconfig $(@:_config=) arm arm926ejs omap5912osk 1581 1582omap1610inn_config \ 1583omap1610inn_cs0boot_config \ 1584omap1610inn_cs3boot_config \ 1585omap1610inn_cs_autoboot_config \ 1586omap1610h2_config \ 1587omap1610h2_cs0boot_config \ 1588omap1610h2_cs3boot_config \ 1589omap1610h2_cs_autoboot_config: unconfig 1590 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 1591 echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ 1592 echo "... configured for CS0 boot"; \ 1593 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 1594 echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \ 1595 echo "... configured for CS_AUTO boot"; \ 1596 else \ 1597 echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ 1598 echo "... configured for CS3 boot"; \ 1599 fi; 1600 @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn 1601 1602omap730p2_config \ 1603omap730p2_cs0boot_config \ 1604omap730p2_cs3boot_config : unconfig 1605 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 1606 echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ 1607 echo "... configured for CS0 boot"; \ 1608 else \ 1609 echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ 1610 echo "... configured for CS3 boot"; \ 1611 fi; 1612 @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 1613 1614scb9328_config : unconfig 1615 @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx 1616 1617smdk2400_config : unconfig 1618 @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 1619 1620smdk2410_config : unconfig 1621 @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 1622 1623SX1_config : unconfig 1624 @./mkconfig $(@:_config=) arm arm925t sx1 1625 1626# TRAB default configuration: 8 MB Flash, 32 MB RAM 1627trab_config \ 1628trab_bigram_config \ 1629trab_bigflash_config \ 1630trab_old_config: unconfig 1631 @ >include/config.h 1632 @[ -z "$(findstring _bigram,$@)" ] || \ 1633 { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ 1634 echo "#define CONFIG_RAM_32MB" >>include/config.h ; \ 1635 echo "... with 8 MB Flash, 32 MB RAM" ; \ 1636 } 1637 @[ -z "$(findstring _bigflash,$@)" ] || \ 1638 { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \ 1639 echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ 1640 echo "... with 16 MB Flash, 16 MB RAM" ; \ 1641 echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ 1642 } 1643 @[ -z "$(findstring _old,$@)" ] || \ 1644 { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ 1645 echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ 1646 echo "... with 8 MB Flash, 16 MB RAM" ; \ 1647 echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ 1648 } 1649 @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 1650 1651VCMA9_config : unconfig 1652 @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0 1653 1654versatile_config : unconfig 1655 @./mkconfig $(@:_config=) arm arm926ejs versatile 1656 1657voiceblue_smallflash_config \ 1658voiceblue_config: unconfig 1659 @if [ "$(findstring _smallflash_,$@)" ] ; then \ 1660 echo "... boot from lower flash bank" ; \ 1661 echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \ 1662 echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \ 1663 else \ 1664 echo "... boot from upper flash bank" ; \ 1665 >include/config.h ; \ 1666 echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \ 1667 fi 1668 @./mkconfig -a voiceblue arm arm925t voiceblue 1669 1670cm4008_config : unconfig 1671 @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695 1672 1673cm41xx_config : unconfig 1674 @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695 1675 1676######################################################################### 1677## S3C44B0 Systems 1678######################################################################### 1679 1680B2_config : unconfig 1681 @./mkconfig $(@:_config=) arm s3c44b0 B2 dave 1682 1683######################################################################### 1684## ARM720T Systems 1685######################################################################### 1686 1687ep7312_config : unconfig 1688 @./mkconfig $(@:_config=) arm arm720t ep7312 1689 1690impa7_config : unconfig 1691 @./mkconfig $(@:_config=) arm arm720t impa7 1692 1693modnet50_config : unconfig 1694 @./mkconfig $(@:_config=) arm arm720t modnet50 1695 1696evb4510_config : unconfig 1697 @./mkconfig $(@:_config=) arm arm720t evb4510 1698 1699######################################################################### 1700## XScale Systems 1701######################################################################### 1702 1703adsvix_config : unconfig 1704 @./mkconfig $(@:_config=) arm pxa adsvix 1705 1706cerf250_config : unconfig 1707 @./mkconfig $(@:_config=) arm pxa cerf250 1708 1709cradle_config : unconfig 1710 @./mkconfig $(@:_config=) arm pxa cradle 1711 1712csb226_config : unconfig 1713 @./mkconfig $(@:_config=) arm pxa csb226 1714 1715innokom_config : unconfig 1716 @./mkconfig $(@:_config=) arm pxa innokom 1717 1718ixdp425_config : unconfig 1719 @./mkconfig $(@:_config=) arm ixp ixdp425 1720 1721lubbock_config : unconfig 1722 @./mkconfig $(@:_config=) arm pxa lubbock 1723 1724logodl_config : unconfig 1725 @./mkconfig $(@:_config=) arm pxa logodl 1726 1727wepep250_config : unconfig 1728 @./mkconfig $(@:_config=) arm pxa wepep250 1729 1730xaeniax_config : unconfig 1731 @./mkconfig $(@:_config=) arm pxa xaeniax 1732 1733xm250_config : unconfig 1734 @./mkconfig $(@:_config=) arm pxa xm250 1735 1736xsengine_config : unconfig 1737 @./mkconfig $(@:_config=) arm pxa xsengine 1738 1739######################################################################### 1740## ARM1136 Systems 1741######################################################################### 1742omap2420h4_config : unconfig 1743 @./mkconfig $(@:_config=) arm arm1136 omap2420h4 1744 1745#======================================================================== 1746# i386 1747#======================================================================== 1748######################################################################### 1749## AMD SC520 CDP 1750######################################################################### 1751sc520_cdp_config : unconfig 1752 @./mkconfig $(@:_config=) i386 i386 sc520_cdp 1753 1754sc520_spunk_config : unconfig 1755 @./mkconfig $(@:_config=) i386 i386 sc520_spunk 1756 1757sc520_spunk_rel_config : unconfig 1758 @./mkconfig $(@:_config=) i386 i386 sc520_spunk 1759 1760#======================================================================== 1761# MIPS 1762#======================================================================== 1763######################################################################### 1764## MIPS32 4Kc 1765######################################################################### 1766 1767xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 1768 1769incaip_100MHz_config \ 1770incaip_133MHz_config \ 1771incaip_150MHz_config \ 1772incaip_config: unconfig 1773 @ >include/config.h 1774 @[ -z "$(findstring _100MHz,$@)" ] || \ 1775 { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \ 1776 echo "... with 100MHz system clock" ; \ 1777 } 1778 @[ -z "$(findstring _133MHz,$@)" ] || \ 1779 { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \ 1780 echo "... with 133MHz system clock" ; \ 1781 } 1782 @[ -z "$(findstring _150MHz,$@)" ] || \ 1783 { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \ 1784 echo "... with 150MHz system clock" ; \ 1785 } 1786 @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip 1787 1788tb0229_config: unconfig 1789 @./mkconfig $(@:_config=) mips mips tb0229 1790 1791######################################################################### 1792## MIPS32 AU1X00 1793######################################################################### 1794dbau1000_config : unconfig 1795 @ >include/config.h 1796 @echo "#define CONFIG_DBAU1000 1" >>include/config.h 1797 @./mkconfig -a dbau1x00 mips mips dbau1x00 1798 1799dbau1100_config : unconfig 1800 @ >include/config.h 1801 @echo "#define CONFIG_DBAU1100 1" >>include/config.h 1802 @./mkconfig -a dbau1x00 mips mips dbau1x00 1803 1804dbau1500_config : unconfig 1805 @ >include/config.h 1806 @echo "#define CONFIG_DBAU1500 1" >>include/config.h 1807 @./mkconfig -a dbau1x00 mips mips dbau1x00 1808 1809dbau1550_config : unconfig 1810 @ >include/config.h 1811 @echo "#define CONFIG_DBAU1550 1" >>include/config.h 1812 @./mkconfig -a dbau1x00 mips mips dbau1x00 1813 1814dbau1550_el_config : unconfig 1815 @ >include/config.h 1816 @echo "#define CONFIG_DBAU1550 1" >>include/config.h 1817 @./mkconfig -a dbau1x00 mips mips dbau1x00 1818 1819pb1000_config : unconfig 1820 @ >include/config.h 1821 @echo "#define CONFIG_PB1000 1" >>include/config.h 1822 @./mkconfig -a pb1x00 mips mips pb1x00 1823 1824######################################################################### 1825## MIPS64 5Kc 1826######################################################################### 1827 1828purple_config : unconfig 1829 @./mkconfig $(@:_config=) mips mips purple 1830 1831#======================================================================== 1832# Nios 1833#======================================================================== 1834######################################################################### 1835## Nios32 1836######################################################################### 1837 1838DK1C20_safe_32_config \ 1839DK1C20_standard_32_config \ 1840DK1C20_config: unconfig 1841 @ >include/config.h 1842 @[ -z "$(findstring _safe_32,$@)" ] || \ 1843 { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ 1844 echo "... NIOS 'safe_32' configuration" ; \ 1845 } 1846 @[ -z "$(findstring _standard_32,$@)" ] || \ 1847 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1848 echo "... NIOS 'standard_32' configuration" ; \ 1849 } 1850 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 1851 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1852 echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 1853 } 1854 @./mkconfig -a DK1C20 nios nios dk1c20 altera 1855 1856DK1S10_safe_32_config \ 1857DK1S10_standard_32_config \ 1858DK1S10_mtx_ldk_20_config \ 1859DK1S10_config: unconfig 1860 @ >include/config.h 1861 @[ -z "$(findstring _safe_32,$@)" ] || \ 1862 { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ 1863 echo "... NIOS 'safe_32' configuration" ; \ 1864 } 1865 @[ -z "$(findstring _standard_32,$@)" ] || \ 1866 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1867 echo "... NIOS 'standard_32' configuration" ; \ 1868 } 1869 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 1870 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \ 1871 echo "... NIOS 'mtx_ldk_20' configuration" ; \ 1872 } 1873 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 1874 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ 1875 echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 1876 } 1877 @./mkconfig -a DK1S10 nios nios dk1s10 altera 1878 1879ADNPESC1_DNPEVA2_base_32_config \ 1880ADNPESC1_base_32_config \ 1881ADNPESC1_config: unconfig 1882 @ >include/config.h 1883 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 1884 { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \ 1885 echo "... DNP/EVA2 configuration" ; \ 1886 } 1887 @[ -z "$(findstring _base_32,$@)" ] || \ 1888 { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ 1889 echo "... NIOS 'base_32' configuration" ; \ 1890 } 1891 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 1892 { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ 1893 echo "... NIOS 'base_32' configuration (DEFAULT)" ; \ 1894 } 1895 @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv 1896 1897######################################################################### 1898## Nios-II 1899######################################################################### 1900 1901PK1C20_config : unconfig 1902 @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent 1903 1904PCI5441_config : unconfig 1905 @./mkconfig PCI5441 nios2 nios2 pci5441 psyent 1906 1907#======================================================================== 1908# MicroBlaze 1909#======================================================================== 1910######################################################################### 1911## Microblaze 1912######################################################################### 1913suzaku_config: unconfig 1914 @ >include/config.h 1915 @echo "#define CONFIG_SUZAKU 1" >> include/config.h 1916 @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno 1917 1918######################################################################### 1919######################################################################### 1920 1921clean: 1922 find . -type f \ 1923 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 1924 -o -name '*.o' -o -name '*.a' \) -print \ 1925 | xargs rm -f 1926 rm -f examples/hello_world examples/timer \ 1927 examples/eepro100_eeprom examples/sched \ 1928 examples/mem_to_mem_idma2intr examples/82559_eeprom \ 1929 examples/test_burst 1930 rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr 1931 rm -f tools/mpc86x_clk tools/ncb 1932 rm -f tools/easylogo/easylogo tools/bmp_logo 1933 rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend 1934 rm -f tools/env/fw_printenv tools/env/fw_setenv 1935 rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image 1936 rm -f board/trab/trab_fkt board/voiceblue/eeprom 1937 1938clobber: clean 1939 find . -type f \( -name .depend \ 1940 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 1941 -print0 \ 1942 | xargs -0 rm -f 1943 rm -f $(OBJS) *.bak tags TAGS 1944 rm -fr *.*~ 1945 rm -f u-boot u-boot.map u-boot.hex $(ALL) 1946 rm -f tools/crc32.c tools/environment.c tools/env/crc32.c 1947 rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c 1948 rm -f include/asm/proc include/asm/arch include/asm 1949 1950mrproper \ 1951distclean: clobber unconfig 1952 1953backup: 1954 F=`basename $(TOPDIR)` ; cd .. ; \ 1955 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 1956 1957######################################################################### 1958