1# 2# (C) Copyright 2000-2010 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 2010 25PATCHLEVEL = 06 26SUBLEVEL = 27EXTRAVERSION = -rc1 28ifneq "$(SUBLEVEL)" "" 29U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 30else 31U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) 32endif 33TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h 34VERSION_FILE = $(obj)include/version_autogenerated.h 35 36HOSTARCH := $(shell uname -m | \ 37 sed -e s/i.86/i386/ \ 38 -e s/sun4u/sparc64/ \ 39 -e s/arm.*/arm/ \ 40 -e s/sa110/arm/ \ 41 -e s/ppc64/powerpc/ \ 42 -e s/ppc/powerpc/ \ 43 -e s/macppc/powerpc/) 44 45HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 46 sed -e 's/\(cygwin\).*/cygwin/') 47 48# Set shell to bash if possible, otherwise fall back to sh 49SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 50 else if [ -x /bin/bash ]; then echo /bin/bash; \ 51 else echo sh; fi; fi) 52 53export HOSTARCH HOSTOS SHELL 54 55# Deal with colliding definitions from tcsh etc. 56VENDOR= 57 58######################################################################### 59# Allow for silent builds 60ifeq (,$(findstring s,$(MAKEFLAGS))) 61XECHO = echo 62else 63XECHO = : 64endif 65 66######################################################################### 67# 68# U-boot build supports producing a object files to the separate external 69# directory. Two use cases are supported: 70# 71# 1) Add O= to the make command line 72# 'make O=/tmp/build all' 73# 74# 2) Set environement variable BUILD_DIR to point to the desired location 75# 'export BUILD_DIR=/tmp/build' 76# 'make' 77# 78# The second approach can also be used with a MAKEALL script 79# 'export BUILD_DIR=/tmp/build' 80# './MAKEALL' 81# 82# Command line 'O=' setting overrides BUILD_DIR environent variable. 83# 84# When none of the above methods is used the local build is performed and 85# the object files are placed in the source directory. 86# 87 88ifdef O 89ifeq ("$(origin O)", "command line") 90BUILD_DIR := $(O) 91endif 92endif 93 94ifneq ($(BUILD_DIR),) 95saved-output := $(BUILD_DIR) 96 97# Attempt to create a output directory. 98$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) 99 100# Verify if it was successful. 101BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) 102$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) 103endif # ifneq ($(BUILD_DIR),) 104 105OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) 106SRCTREE := $(CURDIR) 107TOPDIR := $(SRCTREE) 108LNDIR := $(OBJTREE) 109export TOPDIR SRCTREE OBJTREE 110 111MKCONFIG := $(SRCTREE)/mkconfig 112export MKCONFIG 113 114ifneq ($(OBJTREE),$(SRCTREE)) 115REMOTE_BUILD := 1 116export REMOTE_BUILD 117endif 118 119# $(obj) and (src) are defined in config.mk but here in main Makefile 120# we also need them before config.mk is included which is the case for 121# some targets like unconfig, clean, clobber, distclean, etc. 122ifneq ($(OBJTREE),$(SRCTREE)) 123obj := $(OBJTREE)/ 124src := $(SRCTREE)/ 125else 126obj := 127src := 128endif 129export obj src 130 131# Make sure CDPATH settings don't interfere 132unexport CDPATH 133 134######################################################################### 135 136# The "tools" are needed early, so put this first 137# Don't include stuff already done in $(LIBS) 138SUBDIRS = tools \ 139 examples/standalone \ 140 examples/api 141 142.PHONY : $(SUBDIRS) 143 144ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) 145 146# Include autoconf.mk before config.mk so that the config options are available 147# to all top level build files. We need the dummy all: target to prevent the 148# dependency target in autoconf.mk.dep from being the default. 149all: 150sinclude $(obj)include/autoconf.mk.dep 151sinclude $(obj)include/autoconf.mk 152 153# load ARCH, BOARD, and CPU configuration 154include $(obj)include/config.mk 155export ARCH CPU BOARD VENDOR SOC 156 157# set default to nothing for native builds 158ifeq ($(HOSTARCH),$(ARCH)) 159CROSS_COMPILE ?= 160endif 161 162# load other configuration 163include $(TOPDIR)/config.mk 164 165######################################################################### 166# U-Boot objects....order is important (i.e. start must be first) 167 168OBJS = $(CPUDIR)/start.o 169ifeq ($(CPU),i386) 170OBJS += $(CPUDIR)/start16.o 171OBJS += $(CPUDIR)/resetvec.o 172endif 173ifeq ($(CPU),ppc4xx) 174OBJS += $(CPUDIR)/resetvec.o 175endif 176ifeq ($(CPU),mpc85xx) 177OBJS += $(CPUDIR)/resetvec.o 178endif 179 180OBJS := $(addprefix $(obj),$(OBJS)) 181 182LIBS = lib/libgeneric.a 183LIBS += lib/lzma/liblzma.a 184LIBS += lib/lzo/liblzo.a 185LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ 186 "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) 187LIBS += $(CPUDIR)/lib$(CPU).a 188ifdef SOC 189LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).a 190endif 191ifeq ($(CPU),ixp) 192LIBS += arch/arm/cpu/ixp/npe/libnpe.a 193endif 194LIBS += arch/$(ARCH)/lib/lib$(ARCH).a 195LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 196 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \ 197 fs/ubifs/libubifs.a 198LIBS += net/libnet.a 199LIBS += disk/libdisk.a 200LIBS += drivers/bios_emulator/libatibiosemu.a 201LIBS += drivers/block/libblock.a 202LIBS += drivers/dma/libdma.a 203LIBS += drivers/fpga/libfpga.a 204LIBS += drivers/gpio/libgpio.a 205LIBS += drivers/hwmon/libhwmon.a 206LIBS += drivers/i2c/libi2c.a 207LIBS += drivers/input/libinput.a 208LIBS += drivers/misc/libmisc.a 209LIBS += drivers/mmc/libmmc.a 210LIBS += drivers/mtd/libmtd.a 211LIBS += drivers/mtd/nand/libnand.a 212LIBS += drivers/mtd/onenand/libonenand.a 213LIBS += drivers/mtd/ubi/libubi.a 214LIBS += drivers/mtd/spi/libspi_flash.a 215LIBS += drivers/net/libnet.a 216LIBS += drivers/net/phy/libphy.a 217LIBS += drivers/pci/libpci.a 218LIBS += drivers/pcmcia/libpcmcia.a 219LIBS += drivers/power/libpower.a 220LIBS += drivers/spi/libspi.a 221ifeq ($(CPU),mpc83xx) 222LIBS += drivers/qe/qe.a 223endif 224ifeq ($(CPU),mpc85xx) 225LIBS += drivers/qe/qe.a 226LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a 227LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a 228endif 229ifeq ($(CPU),mpc86xx) 230LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a 231LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a 232endif 233LIBS += drivers/rtc/librtc.a 234LIBS += drivers/serial/libserial.a 235LIBS += drivers/twserial/libtws.a 236LIBS += drivers/usb/gadget/libusb_gadget.a 237LIBS += drivers/usb/host/libusb_host.a 238LIBS += drivers/usb/musb/libusb_musb.a 239LIBS += drivers/usb/phy/libusb_phy.a 240LIBS += drivers/video/libvideo.a 241LIBS += drivers/watchdog/libwatchdog.a 242LIBS += common/libcommon.a 243LIBS += lib/libfdt/libfdt.a 244LIBS += api/libapi.a 245LIBS += post/libpost.a 246 247LIBS := $(addprefix $(obj),$(LIBS)) 248.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) 249 250LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a 251LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) 252 253# Add GCC lib 254ifdef USE_PRIVATE_LIBGCC 255ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") 256PLATFORM_LIBGCC = -L $(OBJTREE)/arch/$(ARCH)/lib -lgcc 257else 258PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc 259endif 260else 261PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 262endif 263PLATFORM_LIBS += $(PLATFORM_LIBGCC) 264export PLATFORM_LIBS 265 266# Special flags for CPP when processing the linker script. 267# Pass the version down so we can handle backwards compatibility 268# on the fly. 269LDPPFLAGS += \ 270 -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ 271 $(shell $(LD) --version | \ 272 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 273 274ifeq ($(CONFIG_NAND_U_BOOT),y) 275NAND_SPL = nand_spl 276U_BOOT_NAND = $(obj)u-boot-nand.bin 277endif 278 279ifeq ($(CONFIG_ONENAND_U_BOOT),y) 280ONENAND_IPL = onenand_ipl 281U_BOOT_ONENAND = $(obj)u-boot-onenand.bin 282ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin 283endif 284 285__OBJS := $(subst $(obj),,$(OBJS)) 286__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) 287 288######################################################################### 289######################################################################### 290 291# Always append ALL so that arch config.mk's can add custom ones 292ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) 293 294all: $(ALL) 295 296$(obj)u-boot.hex: $(obj)u-boot 297 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 298 299$(obj)u-boot.srec: $(obj)u-boot 300 $(OBJCOPY) -O srec $< $@ 301 302$(obj)u-boot.bin: $(obj)u-boot 303 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 304 305$(obj)u-boot.ldr: $(obj)u-boot 306 $(CREATE_LDR_ENV) 307 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) 308 309$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr 310 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 311 312$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr 313 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 314 315$(obj)u-boot.img: $(obj)u-boot.bin 316 $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ 317 -a $(TEXT_BASE) -e 0 \ 318 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 319 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 320 -d $< $@ 321 322$(obj)u-boot.imx: $(obj)u-boot.bin 323 $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \ 324 -e $(TEXT_BASE) -d $< $@ 325 326$(obj)u-boot.kwb: $(obj)u-boot.bin 327 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \ 328 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@ 329 330$(obj)u-boot.sha1: $(obj)u-boot.bin 331 $(obj)tools/ubsha1 $(obj)u-boot.bin 332 333$(obj)u-boot.dis: $(obj)u-boot 334 $(OBJDUMP) -d $< > $@ 335 336GEN_UBOOT = \ 337 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ 338 sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 339 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ 340 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ 341 -Map u-boot.map -o u-boot 342$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds 343 $(GEN_UBOOT) 344ifeq ($(CONFIG_KALLSYMS),y) 345 smap=`$(call SYSTEM_MAP,u-boot) | \ 346 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 347 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ 348 -c common/system_map.c -o $(obj)common/system_map.o 349 $(GEN_UBOOT) $(obj)common/system_map.o 350endif 351 352$(OBJS): depend 353 $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@)) 354 355$(LIBS): depend $(SUBDIRS) 356 $(MAKE) -C $(dir $(subst $(obj),,$@)) 357 358$(LIBBOARD): depend $(LIBS) 359 $(MAKE) -C $(dir $(subst $(obj),,$@)) 360 361$(SUBDIRS): depend 362 $(MAKE) -C $@ all 363 364$(LDSCRIPT): depend 365 $(MAKE) -C $(dir $@) $(notdir $@) 366 367$(obj)u-boot.lds: $(LDSCRIPT) 368 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ 369 370$(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 371 $(MAKE) -C nand_spl/board/$(BOARDDIR) all 372 373$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin 374 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin 375 376$(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 377 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all 378 379$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin 380 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin 381 382$(VERSION_FILE): 383 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ 384 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp 385 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 386 387$(TIMESTAMP_FILE): 388 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ 389 @date +'#define U_BOOT_TIME "%T"' >> $@ 390 391gdbtools: 392 $(MAKE) -C tools/gdb all || exit 1 393 394updater: 395 $(MAKE) -C tools/updater all || exit 1 396 397env: 398 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 399 400# Explicitly make _depend in subdirs containing multiple targets to prevent 401# parallel sub-makes creating .depend files simultaneously. 402depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk 403 for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \ 404 $(MAKE) -C $$dir _depend ; done 405 406TAG_SUBDIRS = $(SUBDIRS) 407TAG_SUBDIRS += $(dir $(__LIBS)) 408TAG_SUBDIRS += include 409 410tags ctags: 411 ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \ 412 -name '*.[chS]' -print` 413 414etags: 415 etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \ 416 -name '*.[chS]' -print` 417cscope: 418 find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files 419 cscope -b -q -k 420 421SYSTEM_MAP = \ 422 $(NM) $1 | \ 423 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 424 LC_ALL=C sort 425$(obj)System.map: $(obj)u-boot 426 @$(call SYSTEM_MAP,$<) > $(obj)System.map 427 428# 429# Auto-generate the autoconf.mk file (which is included by all makefiles) 430# 431# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 432# the dep file is only include in this top level makefile to determine when 433# to regenerate the autoconf.mk file. 434$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h 435 @$(XECHO) Generating $@ ; \ 436 set -e ; \ 437 : Generate the dependancies ; \ 438 $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \ 439 -MQ $(obj)include/autoconf.mk include/common.h > $@ 440 441$(obj)include/autoconf.mk: $(obj)include/config.h 442 @$(XECHO) Generating $@ ; \ 443 set -e ; \ 444 : Extract the config macros ; \ 445 $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ 446 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ 447 mv $@.tmp $@ 448 449######################################################################### 450else # !config.mk 451all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ 452$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ 453$(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \ 454updater env depend dep tags ctags etags cscope $(obj)System.map: 455 @echo "System not configured - see README" >&2 456 @ exit 1 457 458tools: 459 $(MAKE) -C tools 460tools-all: 461 $(MAKE) -C tools HOST_TOOLS_ALL=y 462endif # config.mk 463 464.PHONY : CHANGELOG 465CHANGELOG: 466 git log --no-merges U-Boot-1_1_5.. | \ 467 unexpand -a | sed -e 's/\s\s*$$//' > $@ 468 469include/license.h: tools/bin2header COPYING 470 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 471######################################################################### 472 473unconfig: 474 @rm -f $(obj)include/config.h $(obj)include/config.mk \ 475 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ 476 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep 477 478%: %_config 479 $(MAKE) 480 481#======================================================================== 482# PowerPC 483#======================================================================== 484 485######################################################################### 486## MPC5xx Systems 487######################################################################### 488 489canmb_config: unconfig 490 @$(MKCONFIG) -a canmb powerpc mpc5xxx canmb 491 492cmi_mpc5xx_config: unconfig 493 @$(MKCONFIG) $(@:_config=) powerpc mpc5xx cmi 494 495PATI_config: unconfig 496 @$(MKCONFIG) $(@:_config=) powerpc mpc5xx pati mpl 497 498######################################################################### 499## MPC5xxx Systems 500######################################################################### 501 502aev_config: unconfig 503 @$(MKCONFIG) -a aev powerpc mpc5xxx tqm5200 tqc 504 505BC3450_config: unconfig 506 @$(MKCONFIG) -a BC3450 powerpc mpc5xxx bc3450 507 508cm5200_config: unconfig 509 @$(MKCONFIG) -a cm5200 powerpc mpc5xxx cm5200 510 511cpci5200_config: unconfig 512 @$(MKCONFIG) -a cpci5200 powerpc mpc5xxx cpci5200 esd 513 514digsy_mtc_config \ 515digsy_mtc_LOWBOOT_config \ 516digsy_mtc_RAMBOOT_config: unconfig 517 @mkdir -p $(obj)include 518 @mkdir -p $(obj)board/digsy_mtc 519 @ >$(obj)include/config.h 520 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 521 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \ 522 echo "... with LOWBOOT configuration" ; \ 523 } 524 @[ -z "$(findstring RAMBOOT_,$@)" ] || \ 525 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \ 526 echo "... with RAMBOOT configuration" ; \ 527 } 528 @$(MKCONFIG) -a digsy_mtc powerpc mpc5xxx digsy_mtc 529 530galaxy5200_LOWBOOT_config \ 531galaxy5200_config: unconfig 532 @mkdir -p $(obj)include 533 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 534 @$(MKCONFIG) -a galaxy5200 powerpc mpc5xxx galaxy5200 535 536hmi1001_config: unconfig 537 @$(MKCONFIG) hmi1001 powerpc mpc5xxx hmi1001 538 539Lite5200_config \ 540Lite5200_LOWBOOT_config \ 541Lite5200_LOWBOOT08_config \ 542icecube_5200_config \ 543icecube_5200_LOWBOOT_config \ 544icecube_5200_LOWBOOT08_config \ 545icecube_5200_DDR_config \ 546icecube_5200_DDR_LOWBOOT_config \ 547icecube_5200_DDR_LOWBOOT08_config: unconfig 548 @mkdir -p $(obj)include 549 @mkdir -p $(obj)board/icecube 550 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 551 { if [ "$(findstring DDR,$@)" ] ; \ 552 then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 553 else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 554 fi ; \ 555 $(XECHO) "... with LOWBOOT configuration" ; \ 556 } 557 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 558 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 559 echo "... with 8 MB flash only" ; \ 560 $(XECHO) "... with LOWBOOT configuration" ; \ 561 } 562 @[ -z "$(findstring DDR,$@)" ] || \ 563 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 564 $(XECHO) "... DDR memory revision" ; \ 565 } 566 @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube 567 568jupiter_config: unconfig 569 @$(MKCONFIG) jupiter powerpc mpc5xxx jupiter 570 571inka4x0_config: unconfig 572 @$(MKCONFIG) inka4x0 powerpc mpc5xxx inka4x0 573 574ipek01_config: unconfig 575 @$(MKCONFIG) -a ipek01 powerpc mpc5xxx ipek01 576 577lite5200b_config \ 578lite5200b_PM_config \ 579lite5200b_LOWBOOT_config: unconfig 580 @mkdir -p $(obj)include 581 @mkdir -p $(obj)board/icecube 582 @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h 583 @ $(XECHO) "... DDR memory revision" 584 @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h 585 @[ -z "$(findstring _PM_,$@)" ] || \ 586 { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ 587 $(XECHO) "... with power management (low-power mode) support" ; \ 588 } 589 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 590 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 591 $(XECHO) "... with LOWBOOT configuration" ; \ 592 } 593 @$(MKCONFIG) -a IceCube powerpc mpc5xxx icecube 594 595mcc200_config \ 596mcc200_SDRAM_config \ 597mcc200_highboot_config \ 598mcc200_COM12_config \ 599mcc200_COM12_SDRAM_config \ 600mcc200_COM12_highboot_config \ 601mcc200_COM12_highboot_SDRAM_config \ 602mcc200_highboot_SDRAM_config \ 603prs200_config \ 604prs200_DDR_config \ 605prs200_highboot_config \ 606prs200_highboot_DDR_config: unconfig 607 @mkdir -p $(obj)include 608 @mkdir -p $(obj)board/mcc200 609 @[ -n "$(findstring highboot,$@)" ] || \ 610 { $(XECHO) "... with lowboot configuration" ; \ 611 } 612 @[ -z "$(findstring highboot,$@)" ] || \ 613 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ 614 $(XECHO) "... with highboot configuration" ; \ 615 } 616 @[ -n "$(findstring _SDRAM,$@)" ] || \ 617 { if [ -n "$(findstring mcc200,$@)" ]; \ 618 then \ 619 $(XECHO) "... with DDR" ; \ 620 else \ 621 if [ -n "$(findstring _DDR,$@)" ];\ 622 then \ 623 $(XECHO) "... with DDR" ; \ 624 else \ 625 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ 626 $(XECHO) "... with SDRAM" ; \ 627 fi; \ 628 fi; \ 629 } 630 @[ -z "$(findstring _SDRAM,$@)" ] || \ 631 { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ 632 $(XECHO) "... with SDRAM" ; \ 633 } 634 @[ -z "$(findstring COM12,$@)" ] || \ 635 { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ 636 $(XECHO) "... with console on COM12" ; \ 637 } 638 @[ -z "$(findstring prs200,$@)" ] || \ 639 { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ 640 } 641 @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 642 643mecp5200_config: unconfig 644 @$(MKCONFIG) mecp5200 powerpc mpc5xxx mecp5200 esd 645 646motionpro_config: unconfig 647 @$(MKCONFIG) motionpro powerpc mpc5xxx motionpro 648 649mucmc52_config: unconfig 650 @$(MKCONFIG) mucmc52 powerpc mpc5xxx mucmc52 651 652munices_config: unconfig 653 @$(MKCONFIG) munices powerpc mpc5xxx munices 654 655MVBC_P_config: unconfig 656 @mkdir -p $(obj)include 657 @mkdir -p $(obj)board/mvbc_p 658 @ >$(obj)include/config.h 659 @[ -z "$(findstring MVBC_P,$@)" ] || \ 660 { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } 661 @$(MKCONFIG) -n $@ -a MVBC_P powerpc mpc5xxx mvbc_p matrix_vision 662 663MVSMR_config: unconfig 664 @mkdir -p $(obj)include 665 @mkdir -p $(obj)board/matrix_vision/mvsmr 666 @$(MKCONFIG) $(@:_config=) powerpc mpc5xxx mvsmr matrix_vision 667 668o2dnt_config: unconfig 669 @$(MKCONFIG) o2dnt powerpc mpc5xxx o2dnt 670 671pcm030_config \ 672pcm030_LOWBOOT_config: unconfig 673 @mkdir -p $(obj)include $(obj)board/phytec/pcm030 674 @ >$(obj)include/config.h 675 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 676 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ 677 echo "... with LOWBOOT configuration" ; \ 678 } 679 @$(MKCONFIG) -a pcm030 powerpc mpc5xxx pcm030 phytec 680 681pf5200_config: unconfig 682 @$(MKCONFIG) pf5200 powerpc mpc5xxx pf5200 esd 683 684PM520_config \ 685PM520_DDR_config \ 686PM520_ROMBOOT_config \ 687PM520_ROMBOOT_DDR_config: unconfig 688 @mkdir -p $(obj)include 689 @[ -z "$(findstring DDR,$@)" ] || \ 690 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 691 $(XECHO) "... DDR memory revision" ; \ 692 } 693 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 694 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 695 $(XECHO) "... booting from 8-bit flash" ; \ 696 } 697 @$(MKCONFIG) -a PM520 powerpc mpc5xxx pm520 698 699smmaco4_config: unconfig 700 @$(MKCONFIG) -a smmaco4 powerpc mpc5xxx tqm5200 tqc 701 702spieval_config: unconfig 703 @$(MKCONFIG) -a spieval powerpc mpc5xxx tqm5200 tqc 704 705TB5200_B_config \ 706TB5200_config: unconfig 707 @mkdir -p $(obj)include 708 @[ -z "$(findstring _B,$@)" ] || \ 709 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 710 $(XECHO) "... with MPC5200B processor" ; \ 711 } 712 @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc 713 714MINI5200_config \ 715EVAL5200_config \ 716TOP5200_config: unconfig 717 @mkdir -p $(obj)include 718 @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 719 @$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk 720 721Total5200_config \ 722Total5200_lowboot_config \ 723Total5200_Rev2_config \ 724Total5200_Rev2_lowboot_config: unconfig 725 @mkdir -p $(obj)include 726 @mkdir -p $(obj)board/total5200 727 @[ -n "$(findstring Rev,$@)" ] || \ 728 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ 729 $(XECHO) "... revision 1 board" ; \ 730 } 731 @[ -z "$(findstring Rev2_,$@)" ] || \ 732 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ 733 $(XECHO) "... revision 2 board" ; \ 734 } 735 @[ -z "$(findstring lowboot_,$@)" ] || \ 736 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ 737 $(XECHO) "... with lowboot configuration" ; \ 738 } 739 @$(MKCONFIG) -a Total5200 powerpc mpc5xxx total5200 740 741cam5200_config \ 742cam5200_niosflash_config \ 743fo300_config \ 744MiniFAP_config \ 745TQM5200S_config \ 746TQM5200S_HIGHBOOT_config \ 747TQM5200_B_config \ 748TQM5200_B_HIGHBOOT_config \ 749TQM5200_config \ 750TQM5200_STK100_config: unconfig 751 @mkdir -p $(obj)include 752 @mkdir -p $(obj)board/tqc/tqm5200 753 @[ -z "$(findstring cam5200,$@)" ] || \ 754 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ 755 echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 756 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 757 $(XECHO) "... TQM5200S on Cam5200" ; \ 758 } 759 @[ -z "$(findstring niosflash,$@)" ] || \ 760 { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ 761 $(XECHO) "... with NIOS flash driver" ; \ 762 } 763 @[ -z "$(findstring fo300,$@)" ] || \ 764 { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ 765 $(XECHO) "... TQM5200 on FO300" ; \ 766 } 767 @[ -z "$(findstring MiniFAP,$@)" ] || \ 768 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ 769 $(XECHO) "... TQM5200_AC on MiniFAP" ; \ 770 } 771 @[ -z "$(findstring STK100,$@)" ] || \ 772 { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ 773 $(XECHO) "... on a STK52XX.100 base board" ; \ 774 } 775 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 776 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 777 } 778 @[ -z "$(findstring TQM5200S,$@)" ] || \ 779 { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 780 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 781 } 782 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 783 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ 784 } 785 @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc 786 787uc101_config: unconfig 788 @$(MKCONFIG) uc101 powerpc mpc5xxx uc101 789 790v38b_config: unconfig 791 @$(MKCONFIG) -a v38b powerpc mpc5xxx v38b 792 793######################################################################### 794## MPC512x Systems 795######################################################################### 796 797aria_config: unconfig 798 @$(MKCONFIG) -a aria powerpc mpc512x aria davedenx 799 800mecp5123_config: unconfig 801 @$(MKCONFIG) -a mecp5123 powerpc mpc512x mecp5123 esd 802 803mpc5121ads_config \ 804mpc5121ads_rev2_config \ 805 : unconfig 806 @mkdir -p $(obj)include 807 @if [ "$(findstring rev2,$@)" ] ; then \ 808 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ 809 fi 810 @$(MKCONFIG) -a mpc5121ads powerpc mpc512x mpc5121ads freescale 811 812pdm360ng_config: unconfig 813 @$(MKCONFIG) -a pdm360ng powerpc mpc512x pdm360ng 814 815######################################################################### 816## MPC8xx Systems 817######################################################################### 818 819Adder_config \ 820Adder87x_config \ 821AdderII_config \ 822 : unconfig 823 @mkdir -p $(obj)include 824 $(if $(findstring AdderII,$@), \ 825 @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) 826 @$(MKCONFIG) -a Adder powerpc mpc8xx adder 827 828AdderUSB_config: unconfig 829 @$(MKCONFIG) -a AdderUSB powerpc mpc8xx adder 830 831ADS860_config \ 832FADS823_config \ 833FADS850SAR_config \ 834MPC86xADS_config \ 835MPC885ADS_config \ 836FADS860T_config: unconfig 837 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx fads 838 839AMX860_config : unconfig 840 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx amx860 westel 841 842c2mon_config: unconfig 843 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx c2mon 844 845CCM_config: unconfig 846 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx CCM siemens 847 848cogent_mpc8xx_config: unconfig 849 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx cogent 850 851ELPT860_config: unconfig 852 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx elpt860 LEOX 853 854EP88x_config: unconfig 855 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ep88x 856 857ESTEEM192E_config: unconfig 858 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx esteem192e 859 860ETX094_config : unconfig 861 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx etx094 862 863FLAGADM_config: unconfig 864 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx flagadm 865 866xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 867 868GEN860T_SC_config \ 869GEN860T_config: unconfig 870 @mkdir -p $(obj)include 871 @[ -z "$(findstring _SC,$@)" ] || \ 872 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ 873 $(XECHO) "With reduced H/W feature set (SC)..." ; \ 874 } 875 @$(MKCONFIG) -a $(call xtract_GEN860T,$@) powerpc mpc8xx gen860t 876 877GENIETV_config: unconfig 878 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx genietv 879 880GTH_config: unconfig 881 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx gth 882 883hermes_config : unconfig 884 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx hermes 885 886HMI10_config : unconfig 887 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc 888 889IAD210_config: unconfig 890 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx IAD210 siemens 891 892xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 893 894ICU862_100MHz_config \ 895ICU862_config: unconfig 896 @mkdir -p $(obj)include 897 @[ -z "$(findstring _100MHz,$@)" ] || \ 898 { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ 899 $(XECHO) "... with 100MHz system clock" ; \ 900 } 901 @$(MKCONFIG) -a $(call xtract_ICU862,$@) powerpc mpc8xx icu862 902 903IP860_config : unconfig 904 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx ip860 905 906IVML24_256_config \ 907IVML24_128_config \ 908IVML24_config: unconfig 909 @mkdir -p $(obj)include 910 @[ -z "$(findstring IVML24_config,$@)" ] || \ 911 { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ 912 } 913 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 914 { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ 915 } 916 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 917 { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ 918 } 919 @$(MKCONFIG) -a IVML24 powerpc mpc8xx ivm 920 921IVMS8_256_config \ 922IVMS8_128_config \ 923IVMS8_config: unconfig 924 @mkdir -p $(obj)include 925 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 926 { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ 927 } 928 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 929 { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ 930 } 931 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 932 { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ 933 } 934 @$(MKCONFIG) -a IVMS8 powerpc mpc8xx ivm 935 936kmsupx4_config: unconfig 937 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile 938 939KUP4K_config : unconfig 940 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4k kup 941 942KUP4X_config : unconfig 943 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx kup4x kup 944 945LANTEC_config : unconfig 946 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lantec 947 948lwmon_config: unconfig 949 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx lwmon 950 951MBX_config \ 952MBX860T_config: unconfig 953 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mbx8xx 954 955mgsuvd_config: unconfig 956 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx km8xx keymile 957 958MHPC_config: unconfig 959 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx mhpc eltec 960 961xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 962 963NETVIA_V2_config \ 964NETVIA_config: unconfig 965 @mkdir -p $(obj)include 966 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 967 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ 968 $(XECHO) "... Version 1" ; \ 969 } 970 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 971 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ 972 $(XECHO) "... Version 2" ; \ 973 } 974 @$(MKCONFIG) -a $(call xtract_NETVIA,$@) powerpc mpc8xx netvia 975 976xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 977 978NETPHONE_V2_config \ 979NETPHONE_config: unconfig 980 @mkdir -p $(obj)include 981 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 982 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ 983 } 984 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 985 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ 986 } 987 @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) powerpc mpc8xx netphone 988 989xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 990 991NETTA_ISDN_6412_SWAPHOOK_config \ 992NETTA_ISDN_SWAPHOOK_config \ 993NETTA_6412_SWAPHOOK_config \ 994NETTA_SWAPHOOK_config \ 995NETTA_ISDN_6412_config \ 996NETTA_ISDN_config \ 997NETTA_6412_config \ 998NETTA_config: unconfig 999 @mkdir -p $(obj)include 1000 @[ -z "$(findstring ISDN_,$@)" ] || \ 1001 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ 1002 } 1003 @[ -n "$(findstring ISDN_,$@)" ] || \ 1004 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ 1005 } 1006 @[ -z "$(findstring 6412_,$@)" ] || \ 1007 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ 1008 } 1009 @[ -n "$(findstring 6412_,$@)" ] || \ 1010 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ 1011 } 1012 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 1013 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ 1014 } 1015 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 1016 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ 1017 } 1018 @$(MKCONFIG) -a $(call xtract_NETTA,$@) powerpc mpc8xx netta 1019 1020xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 1021 1022NETTA2_V2_config \ 1023NETTA2_config: unconfig 1024 @mkdir -p $(obj)include 1025 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 1026 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ 1027 } 1028 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 1029 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ 1030 } 1031 @$(MKCONFIG) -a $(call xtract_NETTA2,$@) powerpc mpc8xx netta2 1032 1033NC650_Rev1_config \ 1034NC650_Rev2_config \ 1035CP850_config: unconfig 1036 @mkdir -p $(obj)include 1037 @[ -z "$(findstring CP850,$@)" ] || \ 1038 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ 1039 echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1040 } 1041 @[ -z "$(findstring Rev1,$@)" ] || \ 1042 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ 1043 } 1044 @[ -z "$(findstring Rev2,$@)" ] || \ 1045 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1046 } 1047 @$(MKCONFIG) -a NC650 powerpc mpc8xx nc650 1048 1049NX823_config: unconfig 1050 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx nx823 1051 1052pcu_e_config: unconfig 1053 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx pcu_e siemens 1054 1055QS850_config: unconfig 1056 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc 1057 1058QS823_config: unconfig 1059 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs850 snmc 1060 1061QS860T_config: unconfig 1062 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx qs860t snmc 1063 1064quantum_config: unconfig 1065 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx quantum 1066 1067R360MPI_config: unconfig 1068 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx r360mpi 1069 1070RBC823_config: unconfig 1071 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rbc823 1072 1073RPXClassic_config: unconfig 1074 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXClassic 1075 1076RPXlite_config: unconfig 1077 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RPXlite 1078 1079RPXlite_DW_64_config \ 1080RPXlite_DW_LCD_config \ 1081RPXlite_DW_64_LCD_config \ 1082RPXlite_DW_NVRAM_config \ 1083RPXlite_DW_NVRAM_64_config \ 1084RPXlite_DW_NVRAM_LCD_config \ 1085RPXlite_DW_NVRAM_64_LCD_config \ 1086RPXlite_DW_config: unconfig 1087 @mkdir -p $(obj)include 1088 @[ -z "$(findstring _64,$@)" ] || \ 1089 { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ 1090 $(XECHO) "... with 64MHz system clock ..."; \ 1091 } 1092 @[ -z "$(findstring _LCD,$@)" ] || \ 1093 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1094 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1095 $(XECHO) "... with LCD display ..."; \ 1096 } 1097 @[ -z "$(findstring _NVRAM,$@)" ] || \ 1098 { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ 1099 $(XECHO) "... with ENV in NVRAM ..."; \ 1100 } 1101 @$(MKCONFIG) -a RPXlite_DW powerpc mpc8xx RPXlite_dw 1102 1103rmu_config: unconfig 1104 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx rmu 1105 1106RRvision_config: unconfig 1107 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx RRvision 1108 1109RRvision_LCD_config: unconfig 1110 @mkdir -p $(obj)include 1111 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1112 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1113 @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision 1114 1115SM850_config : unconfig 1116 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx tqm8xx tqc 1117 1118spc1920_config: unconfig 1119 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spc1920 1120 1121SPD823TS_config: unconfig 1122 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx spd8xx 1123 1124stxxtc_config: unconfig 1125 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx stxxtc stx 1126 1127svm_sc8xx_config: unconfig 1128 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx svm_sc8xx 1129 1130SXNI855T_config: unconfig 1131 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx sixnet 1132 1133# EMK MPC8xx based modules 1134TOP860_config: unconfig 1135 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx top860 emk 1136 1137# Play some tricks for configuration selection 1138# Only 855 and 860 boards may come with FEC 1139# and only 823 boards may have LCD support 1140xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 1141 1142FPS850L_config \ 1143FPS860L_config \ 1144NSCU_config \ 1145TQM823L_config \ 1146TQM823L_LCD_config \ 1147TQM850L_config \ 1148TQM855L_config \ 1149TQM860L_config \ 1150TQM862L_config \ 1151TQM823M_config \ 1152TQM850M_config \ 1153TQM855M_config \ 1154TQM860M_config \ 1155TQM862M_config \ 1156TQM866M_config \ 1157TQM885D_config \ 1158TK885D_config \ 1159virtlab2_config: unconfig 1160 @mkdir -p $(obj)include 1161 @[ -z "$(findstring _LCD,$@)" ] || \ 1162 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1163 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1164 $(XECHO) "... with LCD display" ; \ 1165 } 1166 @$(MKCONFIG) -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc 1167 1168TTTech_config: unconfig 1169 @mkdir -p $(obj)include 1170 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1171 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1172 @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc 1173 1174uc100_config : unconfig 1175 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx uc100 1176 1177v37_config: unconfig 1178 @mkdir -p $(obj)include 1179 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1180 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h 1181 @$(MKCONFIG) $(@:_config=) powerpc mpc8xx v37 1182 1183wtk_config: unconfig 1184 @mkdir -p $(obj)include 1185 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1186 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h 1187 @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc 1188 1189######################################################################### 1190## PPC4xx Systems 1191######################################################################### 1192xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 1193 1194acadia_config: unconfig 1195 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx acadia amcc 1196 1197acadia_nand_config: unconfig 1198 @mkdir -p $(obj)include $(obj)board/amcc/acadia 1199 @mkdir -p $(obj)nand_spl/board/amcc/acadia 1200 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1201 @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc 1202 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp 1203 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1204 1205ADCIOP_config: unconfig 1206 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx adciop esd 1207 1208alpr_config: unconfig 1209 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx alpr prodrive 1210 1211AP1000_config:unconfig 1212 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ap1000 amirix 1213 1214APC405_config: unconfig 1215 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx apc405 esd 1216 1217AR405_config: unconfig 1218 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ar405 esd 1219 1220ASH405_config: unconfig 1221 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ash405 esd 1222 1223bamboo_config: unconfig 1224 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bamboo amcc 1225 1226bamboo_nand_config: unconfig 1227 @mkdir -p $(obj)include $(obj)board/amcc/bamboo 1228 @mkdir -p $(obj)nand_spl/board/amcc/bamboo 1229 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1230 @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc 1231 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp 1232 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1233 1234bubinga_config: unconfig 1235 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx bubinga amcc 1236 1237CANBT_config: unconfig 1238 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx canbt esd 1239 1240# Arches, Canyonlands & Glacier use different U-Boot images 1241arches_config \ 1242canyonlands_config \ 1243glacier_config: unconfig 1244 @mkdir -p $(obj)include 1245 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1246 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1247 @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc 1248 1249canyonlands_nand_config \ 1250glacier_nand_config: unconfig 1251 @mkdir -p $(obj)include $(obj)board/amcc/canyonlands 1252 @mkdir -p $(obj)nand_spl/board/amcc/canyonlands 1253 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1254 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ 1255 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1256 @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc 1257 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp 1258 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1259 1260CATcenter_config \ 1261CATcenter_25_config \ 1262CATcenter_33_config: unconfig 1263 @mkdir -p $(obj)include 1264 @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h 1265 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h 1266 @[ -z "$(findstring _25,$@)" ] || \ 1267 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ 1268 $(XECHO) "SysClk = 25MHz" ; \ 1269 } 1270 @[ -z "$(findstring _33,$@)" ] || \ 1271 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ 1272 $(XECHO) "SysClk = 33MHz" ; \ 1273 } 1274 @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave 1275 1276CMS700_config: unconfig 1277 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cms700 esd 1278 1279CPCI2DP_config: unconfig 1280 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci2dp esd 1281 1282CPCI405_config \ 1283CPCI4052_config \ 1284CPCI405DT_config \ 1285CPCI405AB_config: unconfig 1286 @mkdir -p $(obj)board/esd/cpci405 1287 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpci405 esd 1288 1289CPCIISER4_config: unconfig 1290 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx cpciiser4 esd 1291 1292CRAYL1_config: unconfig 1293 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx L1 cray 1294 1295csb272_config: unconfig 1296 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb272 1297 1298csb472_config: unconfig 1299 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx csb472 1300 1301DASA_SIM_config: unconfig 1302 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dasa_sim esd 1303 1304dlvision_config: unconfig 1305 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dlvision gdsys 1306 1307DP405_config: unconfig 1308 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx dp405 esd 1309 1310DU405_config: unconfig 1311 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du405 esd 1312 1313DU440_config: unconfig 1314 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx du440 esd 1315 1316ebony_config: unconfig 1317 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ebony amcc 1318 1319ERIC_config: unconfig 1320 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx eric 1321 1322fx12mm_flash_config: unconfig 1323 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1324 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1325 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1326 > $(obj)board/avnet/fx12mm/config.tmp 1327 @echo "TEXT_BASE := 0xFFCB0000" \ 1328 >> $(obj)board/avnet/fx12mm/config.tmp 1329 @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet 1330 1331fx12mm_config: unconfig 1332 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1333 @mkdir -p $(obj)include $(obj)board/avnet/fx12mm 1334 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1335 > $(obj)board/avnet/fx12mm/config.tmp 1336 @echo "TEXT_BASE := 0x03000000" \ 1337 >> $(obj)board/avnet/fx12mm/config.tmp 1338 @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet 1339 1340G2000_config: unconfig 1341 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx g2000 1342 1343gdppc440etx_config: unconfig 1344 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx gdppc440etx gdsys 1345 1346hcu4_config: unconfig 1347 @mkdir -p $(obj)board/netstal/common 1348 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu4 netstal 1349 1350hcu5_config: unconfig 1351 @mkdir -p $(obj)board/netstal/common 1352 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hcu5 netstal 1353 1354HH405_config: unconfig 1355 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hh405 esd 1356 1357HUB405_config: unconfig 1358 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd 1359 1360icon_config: unconfig 1361 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx icon mosaixtech 1362 1363# Compact-Center(codename intip) & DevCon-Center use different U-Boot images 1364intip_config \ 1365devconcenter_config: unconfig 1366 @mkdir -p $(obj)include 1367 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1368 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1369 @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys 1370 1371JSE_config: unconfig 1372 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx jse 1373 1374KAREF_config: unconfig 1375 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx karef sandburst 1376 1377katmai_config: unconfig 1378 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx katmai amcc 1379 1380# Kilauea & Haleakala images are identical (recognized via PVR) 1381kilauea_config \ 1382haleakala_config: unconfig 1383 @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc 1384 1385kilauea_nand_config \ 1386haleakala_nand_config: unconfig 1387 @mkdir -p $(obj)include $(obj)board/amcc/kilauea 1388 @mkdir -p $(obj)nand_spl/board/amcc/kilauea 1389 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1390 @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc 1391 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp 1392 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1393 1394korat_config: unconfig 1395 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx korat 1396 1397luan_config: unconfig 1398 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx luan amcc 1399 1400lwmon5_config: unconfig 1401 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx lwmon5 1402 1403makalu_config: unconfig 1404 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx makalu amcc 1405 1406mcu25_config: unconfig 1407 @mkdir -p $(obj)board/netstal/common 1408 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mcu25 netstal 1409 1410METROBOX_config: unconfig 1411 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx metrobox sandburst 1412 1413MIP405_config: unconfig 1414 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx mip405 mpl 1415 1416MIP405T_config: unconfig 1417 @mkdir -p $(obj)include 1418 @echo "#define CONFIG_MIP405T" >$(obj)include/config.h 1419 @$(XECHO) "Enable subset config for MIP405T" 1420 @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl 1421 1422ML2_config: unconfig 1423 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ml2 1424 1425ml507_flash_config: unconfig 1426 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1427 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1428 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1429 > $(obj)board/xilinx/ml507/config.tmp 1430 @echo "TEXT_BASE := 0xFE360000" \ 1431 >> $(obj)board/xilinx/ml507/config.tmp 1432 @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx 1433 1434ml507_config: unconfig 1435 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1436 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1437 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1438 > $(obj)board/xilinx/ml507/config.tmp 1439 @echo "TEXT_BASE := 0x04000000" \ 1440 >> $(obj)board/xilinx/ml507/config.tmp 1441 @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx 1442 1443neo_config: unconfig 1444 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx neo gdsys 1445 1446ocotea_config: unconfig 1447 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocotea amcc 1448 1449OCRTC_config \ 1450ORSG_config: unconfig 1451 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx ocrtc esd 1452 1453p3p440_config: unconfig 1454 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx p3p440 prodrive 1455 1456PCI405_config: unconfig 1457 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pci405 esd 1458 1459pcs440ep_config: unconfig 1460 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pcs440ep 1461 1462PIP405_config: unconfig 1463 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pip405 mpl 1464 1465PLU405_config: unconfig 1466 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx plu405 esd 1467 1468PMC405_config: unconfig 1469 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405 esd 1470 1471PMC405DE_config: unconfig 1472 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc405de esd 1473 1474PMC440_config: unconfig 1475 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx pmc440 esd 1476 1477PPChameleonEVB_config \ 1478PPChameleonEVB_BA_25_config \ 1479PPChameleonEVB_ME_25_config \ 1480PPChameleonEVB_HI_25_config \ 1481PPChameleonEVB_BA_33_config \ 1482PPChameleonEVB_ME_33_config \ 1483PPChameleonEVB_HI_33_config: unconfig 1484 @mkdir -p $(obj)include 1485 @[ -z "$(findstring EVB_BA,$@)" ] || \ 1486 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ 1487 $(XECHO) "... BASIC model" ; \ 1488 } 1489 @[ -z "$(findstring EVB_ME,$@)" ] || \ 1490 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ 1491 $(XECHO) "... MEDIUM model" ; \ 1492 } 1493 @[ -z "$(findstring EVB_HI,$@)" ] || \ 1494 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ 1495 $(XECHO) "... HIGH-END model" ; \ 1496 } 1497 @[ -z "$(findstring _25,$@)" ] || \ 1498 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ 1499 $(XECHO) "SysClk = 25MHz" ; \ 1500 } 1501 @[ -z "$(findstring _33,$@)" ] || \ 1502 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ 1503 $(XECHO) "SysClk = 33MHz" ; \ 1504 } 1505 @$(MKCONFIG) -a $(call xtract_4xx,$@) powerpc ppc4xx PPChameleonEVB dave 1506 1507quad100hd_config: unconfig 1508 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx quad100hd 1509 1510redwood_config: unconfig 1511 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx redwood amcc 1512 1513sbc405_config: unconfig 1514 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sbc405 1515 1516sc3_config:unconfig 1517 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx sc3 1518 1519sequoia_config \ 1520rainier_config: unconfig 1521 @mkdir -p $(obj)include 1522 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1523 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1524 @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc 1525 1526sequoia_nand_config \ 1527rainier_nand_config: unconfig 1528 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1529 @mkdir -p $(obj)nand_spl/board/amcc/sequoia 1530 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1531 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1532 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1533 @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc 1534 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1535 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1536 1537sequoia_ramboot_config \ 1538rainier_ramboot_config: unconfig 1539 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1540 @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h 1541 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1542 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1543 @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc 1544 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1545 @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ 1546 $(obj)board/amcc/sequoia/config.tmp 1547 1548taihu_config: unconfig 1549 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taihu amcc 1550 1551taishan_config: unconfig 1552 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx taishan amcc 1553 1554v5fx30teval_config: unconfig 1555 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1556 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1557 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1558 > $(obj)board/avnet/v5fx30teval/config.tmp 1559 @echo "TEXT_BASE := 0x03000000" \ 1560 >> $(obj)board/avnet/v5fx30teval/config.tmp 1561 @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet 1562 1563v5fx30teval_flash_config: unconfig 1564 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1565 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1566 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1567 > $(obj)board/avnet/v5fx30teval/config.tmp 1568 @echo "TEXT_BASE := 0xFF1C0000" \ 1569 >> $(obj)board/avnet/v5fx30teval/config.tmp 1570 @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet 1571 1572VOH405_config: unconfig 1573 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx voh405 esd 1574 1575VOM405_config: unconfig 1576 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx vom405 esd 1577 1578W7OLMC_config \ 1579W7OLMG_config: unconfig 1580 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx w7o 1581 1582# Walnut & Sycamore images are identical (recognized via PVR) 1583walnut_config \ 1584sycamore_config: unconfig 1585 @$(MKCONFIG) -n $@ -a walnut powerpc ppc4xx walnut amcc 1586 1587WUH405_config: unconfig 1588 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx wuh405 esd 1589 1590xilinx-ppc405-generic_flash_config: unconfig 1591 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1592 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ 1593 > $(obj)board/xilinx/ppc405-generic/config.tmp 1594 @echo "TEXT_BASE := 0xFE360000" \ 1595 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1596 @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx 1597 1598xilinx-ppc405-generic_config: unconfig 1599 @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic 1600 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ 1601 > $(obj)board/xilinx/ppc405-generic/config.tmp 1602 @echo "TEXT_BASE := 0x04000000" \ 1603 >> $(obj)board/xilinx/ppc405-generic/config.tmp 1604 @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx 1605 1606xilinx-ppc440-generic_flash_config: unconfig 1607 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1608 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1609 > $(obj)board/xilinx/ppc440-generic/config.tmp 1610 @echo "TEXT_BASE := 0xFE360000" \ 1611 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1612 @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx 1613 1614xilinx-ppc440-generic_config: unconfig 1615 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1616 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1617 > $(obj)board/xilinx/ppc440-generic/config.tmp 1618 @echo "TEXT_BASE := 0x04000000" \ 1619 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1620 @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx 1621 1622XPEDITE1000_config: unconfig 1623 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx xpedite1000 xes 1624 1625yosemite_config \ 1626yellowstone_config: unconfig 1627 @mkdir -p $(obj)include 1628 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1629 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1630 @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc 1631 1632yucca_config: unconfig 1633 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx yucca amcc 1634 1635zeus_config: unconfig 1636 @$(MKCONFIG) $(@:_config=) powerpc ppc4xx zeus 1637 1638######################################################################### 1639## MPC8220 Systems 1640######################################################################### 1641 1642Alaska8220_config \ 1643Yukon8220_config: unconfig 1644 @$(MKCONFIG) $(@:_config=) powerpc mpc8220 alaska 1645 1646sorcery_config: unconfig 1647 @$(MKCONFIG) $(@:_config=) powerpc mpc8220 sorcery 1648 1649######################################################################### 1650## MPC824x Systems 1651######################################################################### 1652xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1653 1654A3000_config: unconfig 1655 @$(MKCONFIG) $(@:_config=) powerpc mpc824x a3000 1656 1657barco_config: unconfig 1658 @$(MKCONFIG) $(@:_config=) powerpc mpc824x barco 1659 1660BMW_config: unconfig 1661 @$(MKCONFIG) $(@:_config=) powerpc mpc824x bmw 1662 1663CPC45_config \ 1664CPC45_ROMBOOT_config: unconfig 1665 @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc824x cpc45 1666 @cd $(obj)include ; \ 1667 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1668 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1669 $(XECHO) "... booting from 8-bit flash" ; \ 1670 else \ 1671 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1672 $(XECHO) "... booting from 64-bit flash" ; \ 1673 fi; \ 1674 echo "export CONFIG_BOOT_ROM" >> config.mk; 1675 1676CU824_config: unconfig 1677 @$(MKCONFIG) $(@:_config=) powerpc mpc824x cu824 1678 1679debris_config: unconfig 1680 @$(MKCONFIG) $(@:_config=) powerpc mpc824x debris etin 1681 1682eXalion_config: unconfig 1683 @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion 1684 1685HIDDEN_DRAGON_config: unconfig 1686 @$(MKCONFIG) $(@:_config=) powerpc mpc824x hidden_dragon 1687 1688kvme080_config: unconfig 1689 @$(MKCONFIG) $(@:_config=) powerpc mpc824x kvme080 etin 1690 1691# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as 1692# time permits. 1693#linkstation_HDLAN_config \ 1694# Remove this line when HDLAN is fixed 1695linkstation_HGLAN_config: unconfig 1696 @mkdir -p $(obj)include 1697 @case $@ in \ 1698 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ 1699 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ 1700 esac 1701 @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation 1702 1703MOUSSE_config: unconfig 1704 @$(MKCONFIG) $(@:_config=) powerpc mpc824x mousse 1705 1706MUSENKI_config: unconfig 1707 @$(MKCONFIG) $(@:_config=) powerpc mpc824x musenki 1708 1709MVBLUE_config: unconfig 1710 @$(MKCONFIG) $(@:_config=) powerpc mpc824x mvblue 1711 1712OXC_config: unconfig 1713 @$(MKCONFIG) $(@:_config=) powerpc mpc824x oxc 1714 1715PN62_config: unconfig 1716 @$(MKCONFIG) $(@:_config=) powerpc mpc824x pn62 1717 1718Sandpoint8240_config: unconfig 1719 @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint 1720 1721Sandpoint8245_config: unconfig 1722 @$(MKCONFIG) $(@:_config=) powerpc mpc824x sandpoint 1723 1724sbc8240_config: unconfig 1725 @$(MKCONFIG) $(@:_config=) powerpc mpc824x sbc8240 1726 1727utx8245_config: unconfig 1728 @$(MKCONFIG) $(@:_config=) powerpc mpc824x utx8245 1729 1730######################################################################### 1731## MPC8260 Systems 1732######################################################################### 1733 1734atc_config: unconfig 1735 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 atc 1736 1737cogent_mpc8260_config: unconfig 1738 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent 1739 1740CPU86_config \ 1741CPU86_ROMBOOT_config: unconfig 1742 @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu86 1743 @cd $(obj)include ; \ 1744 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1745 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1746 $(XECHO) "... booting from 8-bit flash" ; \ 1747 else \ 1748 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1749 $(XECHO) "... booting from 64-bit flash" ; \ 1750 fi; \ 1751 echo "export CONFIG_BOOT_ROM" >> config.mk; 1752 1753CPU87_config \ 1754CPU87_ROMBOOT_config: unconfig 1755 @$(MKCONFIG) $(call xtract_82xx,$@) powerpc mpc8260 cpu87 1756 @cd $(obj)include ; \ 1757 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1758 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1759 $(XECHO) "... booting from 8-bit flash" ; \ 1760 else \ 1761 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1762 $(XECHO) "... booting from 64-bit flash" ; \ 1763 fi; \ 1764 echo "export CONFIG_BOOT_ROM" >> config.mk; 1765 1766ep8248_config \ 1767ep8248E_config : unconfig 1768 @$(MKCONFIG) ep8248 powerpc mpc8260 ep8248 1769 1770ep8260_config: unconfig 1771 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep8260 1772 1773ep82xxm_config: unconfig 1774 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ep82xxm 1775 1776gw8260_config: unconfig 1777 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 gw8260 1778 1779hymod_config: unconfig 1780 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 hymod 1781 1782IDS8247_config: unconfig 1783 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ids8247 1784 1785IPHASE4539_config: unconfig 1786 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 iphase4539 1787 1788ISPAN_config \ 1789ISPAN_REVB_config: unconfig 1790 @mkdir -p $(obj)include 1791 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1792 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ 1793 fi 1794 @$(MKCONFIG) -a ISPAN powerpc mpc8260 ispan 1795 1796mgcoge_config : unconfig 1797 @$(MKCONFIG) mgcoge powerpc mpc8260 mgcoge keymile 1798 1799MPC8260ADS_config \ 1800MPC8260ADS_lowboot_config \ 1801MPC8260ADS_33MHz_config \ 1802MPC8260ADS_33MHz_lowboot_config \ 1803MPC8260ADS_40MHz_config \ 1804MPC8260ADS_40MHz_lowboot_config \ 1805MPC8272ADS_config \ 1806MPC8272ADS_lowboot_config \ 1807PQ2FADS_config \ 1808PQ2FADS_lowboot_config \ 1809PQ2FADS-VR_config \ 1810PQ2FADS-VR_lowboot_config \ 1811PQ2FADS-ZU_config \ 1812PQ2FADS-ZU_lowboot_config \ 1813PQ2FADS-ZU_66MHz_config \ 1814PQ2FADS-ZU_66MHz_lowboot_config \ 1815 : unconfig 1816 @mkdir -p $(obj)include 1817 @mkdir -p $(obj)board/freescale/mpc8260ads 1818 $(if $(findstring PQ2FADS,$@), \ 1819 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ 1820 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) 1821 $(if $(findstring MHz,$@), \ 1822 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ 1823 $(if $(findstring VR,$@), \ 1824 @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) 1825 @[ -z "$(findstring lowboot_,$@)" ] || \ 1826 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ 1827 $(XECHO) "... with lowboot configuration" ; \ 1828 } 1829 @$(MKCONFIG) -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale 1830 1831MPC8266ADS_config: unconfig 1832 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 mpc8266ads freescale 1833 1834muas3001_dev_config \ 1835muas3001_config : unconfig 1836 @mkdir -p $(obj)include 1837 @mkdir -p $(obj)board/muas3001 1838 @if [ "$(findstring dev,$@)" ] ; then \ 1839 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ 1840 fi 1841 @$(MKCONFIG) -a muas3001 powerpc mpc8260 muas3001 1842 1843# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1844PM825_config \ 1845PM825_ROMBOOT_config \ 1846PM825_BIGFLASH_config \ 1847PM825_ROMBOOT_BIGFLASH_config \ 1848PM826_config \ 1849PM826_ROMBOOT_config \ 1850PM826_BIGFLASH_config \ 1851PM826_ROMBOOT_BIGFLASH_config: unconfig 1852 @mkdir -p $(obj)include 1853 @mkdir -p $(obj)board/pm826 1854 @if [ "$(findstring PM825_,$@)" ] ; then \ 1855 echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ 1856 else \ 1857 >$(obj)include/config.h ; \ 1858 fi 1859 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1860 $(XECHO) "... booting from 8-bit flash" ; \ 1861 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1862 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1863 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1864 $(XECHO) "... with 32 MB Flash" ; \ 1865 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1866 fi; \ 1867 else \ 1868 $(XECHO) "... booting from 64-bit flash" ; \ 1869 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1870 $(XECHO) "... with 32 MB Flash" ; \ 1871 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1872 echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ 1873 else \ 1874 echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ 1875 fi; \ 1876 fi 1877 @$(MKCONFIG) -a PM826 powerpc mpc8260 pm826 1878 1879PM828_config \ 1880PM828_PCI_config \ 1881PM828_ROMBOOT_config \ 1882PM828_ROMBOOT_PCI_config: unconfig 1883 @mkdir -p $(obj)include 1884 @mkdir -p $(obj)board/pm826 1885 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1886 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 1887 $(XECHO) "... with PCI enabled" ; \ 1888 fi 1889 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1890 $(XECHO) "... booting from 8-bit flash" ; \ 1891 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1892 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1893 fi 1894 @$(MKCONFIG) -a PM828 powerpc mpc8260 pm828 1895 1896ppmc8260_config: unconfig 1897 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 ppmc8260 1898 1899Rattler8248_config \ 1900Rattler_config: unconfig 1901 @mkdir -p $(obj)include 1902 $(if $(findstring 8248,$@), \ 1903 @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) 1904 @$(MKCONFIG) -a Rattler powerpc mpc8260 rattler 1905 1906RPXsuper_config: unconfig 1907 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rpxsuper 1908 1909rsdproto_config: unconfig 1910 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 rsdproto 1911 1912sacsng_config: unconfig 1913 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sacsng 1914 1915sbc8260_config: unconfig 1916 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 sbc8260 1917 1918SCM_config: unconfig 1919 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 SCM siemens 1920 1921TQM8255_AA_config \ 1922TQM8260_AA_config \ 1923TQM8260_AB_config \ 1924TQM8260_AC_config \ 1925TQM8260_AD_config \ 1926TQM8260_AE_config \ 1927TQM8260_AF_config \ 1928TQM8260_AG_config \ 1929TQM8260_AH_config \ 1930TQM8260_AI_config \ 1931TQM8265_AA_config: unconfig 1932 @mkdir -p $(obj)include 1933 @case "$@" in \ 1934 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1935 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1936 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1937 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1938 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1939 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1940 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1941 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1942 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1943 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1944 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1945 esac; \ 1946 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1947 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ 1948 fi; \ 1949 echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ 1950 echo "... with $${CFREQ}MHz system clock" ; \ 1951 if [ "$${CACHE}" = "yes" ] ; then \ 1952 echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1953 $(XECHO) "... with L2 Cache support" ; \ 1954 else \ 1955 echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1956 $(XECHO) "... without L2 Cache support" ; \ 1957 fi; \ 1958 if [ "$${BMODE}" = "60x" ] ; then \ 1959 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1960 $(XECHO) "... with 60x Bus Mode" ; \ 1961 else \ 1962 echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1963 $(XECHO) "... without 60x Bus Mode" ; \ 1964 fi 1965 @$(MKCONFIG) -a TQM8260 powerpc mpc8260 tqm8260 tqc 1966 1967TQM8272_config: unconfig 1968 @$(MKCONFIG) TQM8272 powerpc mpc8260 tqm8272 tqc 1969 1970VoVPN-GW_66MHz_config \ 1971VoVPN-GW_100MHz_config: unconfig 1972 @mkdir -p $(obj)include 1973 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h 1974 @$(MKCONFIG) -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk 1975 1976ZPC1900_config: unconfig 1977 @$(MKCONFIG) $(@:_config=) powerpc mpc8260 zpc1900 1978 1979######################################################################### 1980## Coldfire 1981######################################################################### 1982 1983astro_mcf5373l_config \ 1984astro_mcf5373l_RAM_config : unconfig 1985 @$(MKCONFIG) -t $(@:_config=) astro_mcf5373l m68k mcf532x mcf5373l astro 1986 1987M5208EVBE_config : unconfig 1988 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale 1989 1990M52277EVB_config \ 1991M52277EVB_spansion_config \ 1992M52277EVB_stmicro_config : unconfig 1993 @case "$@" in \ 1994 M52277EVB_config) FLASH=SPANSION;; \ 1995 M52277EVB_spansion_config) FLASH=SPANSION;; \ 1996 M52277EVB_stmicro_config) FLASH=STMICRO;; \ 1997 esac; \ 1998 if [ "$${FLASH}" = "SPANSION" ] ; then \ 1999 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 2000 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 2001 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ 2002 $(XECHO) "... with SPANSION boot..." ; \ 2003 fi; \ 2004 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2005 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2006 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2007 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ 2008 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ 2009 $(XECHO) "... with ST Micro boot..." ; \ 2010 fi 2011 @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale 2012 2013M5235EVB_config \ 2014M5235EVB_Flash16_config \ 2015M5235EVB_Flash32_config: unconfig 2016 @case "$@" in \ 2017 M5235EVB_config) FLASH=16;; \ 2018 M5235EVB_Flash16_config) FLASH=16;; \ 2019 M5235EVB_Flash32_config) FLASH=32;; \ 2020 esac; \ 2021 if [ "$${FLASH}" != "16" ] ; then \ 2022 echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ 2023 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2024 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2025 else \ 2026 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 2027 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 2028 fi 2029 @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale 2030 2031M5249EVB_config : unconfig 2032 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale 2033 2034M5253DEMO_config : unconfig 2035 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale 2036 2037M5253EVBE_config : unconfig 2038 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale 2039 2040cobra5272_config : unconfig 2041 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 2042 2043EB+MCF-EV123_config : unconfig 2044 @mkdir -p $(obj)include 2045 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2046 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2047 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2048 2049EB+MCF-EV123_internal_config : unconfig 2050 @mkdir -p $(obj)include 2051 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 2052 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 2053 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 2054 2055EP2500_config: unconfig 2056 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 ep2500 Mercury 2057 2058idmr_config : unconfig 2059 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr 2060 2061M5271EVB_config : unconfig 2062 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale 2063 2064M5272C3_config : unconfig 2065 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale 2066 2067M5275EVB_config : unconfig 2068 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale 2069 2070M5282EVB_config : unconfig 2071 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale 2072 2073M53017EVB_config : unconfig 2074 @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale 2075 2076M5329AFEE_config \ 2077M5329BFEE_config : unconfig 2078 @case "$@" in \ 2079 M5329AFEE_config) NAND=0;; \ 2080 M5329BFEE_config) NAND=16;; \ 2081 esac; \ 2082 if [ "$${NAND}" != "0" ] ; then \ 2083 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2084 fi 2085 @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale 2086 2087M5373EVB_config : unconfig 2088 @case "$@" in \ 2089 M5373EVB_config) NAND=16;; \ 2090 esac; \ 2091 if [ "$${NAND}" != "0" ] ; then \ 2092 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 2093 fi 2094 @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale 2095 2096M54451EVB_config \ 2097M54451EVB_stmicro_config : unconfig 2098 @case "$@" in \ 2099 M54451EVB_config) FLASH=NOR;; \ 2100 M54451EVB_stmicro_config) FLASH=STMICRO;; \ 2101 esac; \ 2102 if [ "$${FLASH}" = "NOR" ] ; then \ 2103 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2104 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2105 $(XECHO) "... with NOR boot..." ; \ 2106 fi; \ 2107 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2108 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2109 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2110 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 2111 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ 2112 $(XECHO) "... with ST Micro boot..." ; \ 2113 fi; \ 2114 echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; 2115 @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale 2116 2117M54455EVB_config \ 2118M54455EVB_atmel_config \ 2119M54455EVB_intel_config \ 2120M54455EVB_a33_config \ 2121M54455EVB_a66_config \ 2122M54455EVB_i33_config \ 2123M54455EVB_i66_config \ 2124M54455EVB_stm33_config : unconfig 2125 @case "$@" in \ 2126 M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ 2127 M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ 2128 M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ 2129 M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ 2130 M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ 2131 M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ 2132 M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ 2133 M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ 2134 esac; \ 2135 if [ "$${FLASH}" = "INTEL" ] ; then \ 2136 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ 2137 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2138 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2139 $(XECHO) "... with INTEL boot..." ; \ 2140 fi; \ 2141 if [ "$${FLASH}" = "ATMEL" ] ; then \ 2142 echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ 2143 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2144 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2145 $(XECHO) "... with ATMEL boot..." ; \ 2146 fi; \ 2147 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2148 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2149 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2150 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2151 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2152 $(XECHO) "... with ST Micro boot..." ; \ 2153 fi; \ 2154 echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ 2155 $(XECHO) "... with $${FREQ}Hz input clock" 2156 @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale 2157 2158M5475AFE_config \ 2159M5475BFE_config \ 2160M5475CFE_config \ 2161M5475DFE_config \ 2162M5475EFE_config \ 2163M5475FFE_config \ 2164M5475GFE_config : unconfig 2165 @case "$@" in \ 2166 M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2167 M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2168 M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2169 M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2170 M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2171 M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2172 M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2173 esac; \ 2174 echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ 2175 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2176 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2177 if [ "$${RAM1}" != "0" ] ; then \ 2178 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2179 fi; \ 2180 if [ "$${CODE}" != "0" ] ; then \ 2181 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2182 fi; \ 2183 if [ "$${VID}" == "1" ] ; then \ 2184 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2185 fi; \ 2186 if [ "$${USB}" == "1" ] ; then \ 2187 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2188 fi 2189 @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale 2190 2191M5485AFE_config \ 2192M5485BFE_config \ 2193M5485CFE_config \ 2194M5485DFE_config \ 2195M5485EFE_config \ 2196M5485FFE_config \ 2197M5485GFE_config \ 2198M5485HFE_config : unconfig 2199 @case "$@" in \ 2200 M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2201 M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2202 M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2203 M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2204 M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2205 M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2206 M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2207 M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ 2208 esac; \ 2209 echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ 2210 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2211 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2212 if [ "$${RAM1}" != "0" ] ; then \ 2213 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2214 fi; \ 2215 if [ "$${CODE}" != "0" ] ; then \ 2216 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2217 fi; \ 2218 if [ "$${VID}" == "1" ] ; then \ 2219 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2220 fi; \ 2221 if [ "$${USB}" == "1" ] ; then \ 2222 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2223 fi 2224 @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale 2225 2226TASREG_config : unconfig 2227 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd 2228 2229######################################################################### 2230## MPC83xx Systems 2231######################################################################### 2232 2233kmeter1_config: unconfig 2234 @$(MKCONFIG) kmeter1 powerpc mpc83xx kmeter1 keymile 2235 2236MPC8313ERDB_33_config \ 2237MPC8313ERDB_66_config \ 2238MPC8313ERDB_NAND_33_config \ 2239MPC8313ERDB_NAND_66_config: unconfig 2240 @mkdir -p $(obj)include 2241 @mkdir -p $(obj)board/freescale/mpc8313erdb 2242 @if [ "$(findstring _33_,$@)" ] ; then \ 2243 $(XECHO) -n "...33M ..." ; \ 2244 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ 2245 fi ; \ 2246 if [ "$(findstring _66_,$@)" ] ; then \ 2247 $(XECHO) -n "...66M..." ; \ 2248 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ 2249 fi ; \ 2250 if [ "$(findstring _NAND_,$@)" ] ; then \ 2251 $(XECHO) -n "...NAND..." ; \ 2252 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ 2253 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ 2254 fi ; 2255 @$(MKCONFIG) -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale 2256 @if [ "$(findstring _NAND_,$@)" ] ; then \ 2257 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ 2258 fi ; 2259 2260MPC8315ERDB_NAND_config \ 2261MPC8315ERDB_config: unconfig 2262 @$(MKCONFIG) -t $(@:_config=) MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale 2263 2264MPC8323ERDB_config: unconfig 2265 @$(MKCONFIG) -a MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale 2266 2267MPC832XEMDS_config \ 2268MPC832XEMDS_HOST_33_config \ 2269MPC832XEMDS_HOST_66_config \ 2270MPC832XEMDS_SLAVE_config \ 2271MPC832XEMDS_ATM_config: unconfig 2272 @mkdir -p $(obj)include 2273 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2274 $(XECHO) -n "... PCI HOST " ; \ 2275 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2276 fi ; \ 2277 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2278 $(XECHO) "...PCI SLAVE 66M" ; \ 2279 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2280 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2281 fi ; \ 2282 if [ "$(findstring _33_,$@)" ] ; then \ 2283 $(XECHO) -n "...33M ..." ; \ 2284 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2285 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2286 fi ; \ 2287 if [ "$(findstring _66_,$@)" ] ; then \ 2288 $(XECHO) -n "...66M..." ; \ 2289 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2290 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2291 fi ; \ 2292 if [ "$(findstring _ATM_,$@)" ] ; then \ 2293 $(XECHO) -n "...ATM..." ; \ 2294 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2295 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2296 fi ; 2297 @$(MKCONFIG) -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale 2298 2299MPC8349EMDS_config: unconfig 2300 @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mpc8349emds freescale 2301 2302MPC8349ITX_config \ 2303MPC8349ITX_LOWBOOT_config \ 2304MPC8349ITXGP_config: unconfig 2305 @mkdir -p $(obj)include 2306 @mkdir -p $(obj)board/freescale/mpc8349itx 2307 @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h 2308 @if [ "$(findstring GP,$@)" ] ; then \ 2309 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2310 fi 2311 @if [ "$(findstring LOWBOOT,$@)" ] ; then \ 2312 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2313 fi 2314 @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX powerpc mpc83xx mpc8349itx freescale 2315 2316MPC8360EMDS_config \ 2317MPC8360EMDS_HOST_33_config \ 2318MPC8360EMDS_HOST_66_config \ 2319MPC8360EMDS_SLAVE_config \ 2320MPC8360EMDS_ATM_config: unconfig 2321 @mkdir -p $(obj)include 2322 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2323 $(XECHO) -n "... PCI HOST " ; \ 2324 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2325 fi ; \ 2326 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2327 $(XECHO) "...PCI SLAVE 66M" ; \ 2328 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2329 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2330 fi ; \ 2331 if [ "$(findstring _33_,$@)" ] ; then \ 2332 $(XECHO) -n "...33M ..." ; \ 2333 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2334 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2335 fi ; \ 2336 if [ "$(findstring _66_,$@)" ] ; then \ 2337 $(XECHO) -n "...66M..." ; \ 2338 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2339 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2340 fi ; \ 2341 if [ "$(findstring _ATM_,$@)" ] ; then \ 2342 $(XECHO) -n "...ATM..." ; \ 2343 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2344 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2345 fi ; 2346 @$(MKCONFIG) -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale 2347 2348MPC8360ERDK_33_config \ 2349MPC8360ERDK_66_config \ 2350MPC8360ERDK_config: unconfig 2351 @mkdir -p $(obj)include 2352 @if [ "$(findstring _33_,$@)" ] ; then \ 2353 $(XECHO) -n "... CLKIN 33MHz " ; \ 2354 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ 2355 fi ; 2356 @$(MKCONFIG) -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale 2357 2358MPC837XEMDS_config \ 2359MPC837XEMDS_HOST_config: unconfig 2360 @mkdir -p $(obj)include 2361 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2362 $(XECHO) -n "... PCI HOST " ; \ 2363 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2364 fi ; 2365 @$(MKCONFIG) -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale 2366 2367MPC837XERDB_config: unconfig 2368 @$(MKCONFIG) -a MPC837XERDB powerpc mpc83xx mpc837xerdb freescale 2369 2370MVBLM7_config: unconfig 2371 @$(MKCONFIG) $(@:_config=) powerpc mpc83xx mvblm7 matrix_vision 2372 2373sbc8349_config \ 2374sbc8349_PCI_33_config \ 2375sbc8349_PCI_66_config: unconfig 2376 @$(MKCONFIG) -t $(@:_config=) sbc8349 powerpc mpc83xx sbc8349 2377 2378SIMPC8313_LP_config \ 2379SIMPC8313_SP_config: unconfig 2380 @mkdir -p $(obj)include 2381 @mkdir -p $(obj)board/sheldon/simpc8313 2382 @if [ "$(findstring _LP_,$@)" ] ; then \ 2383 $(XECHO) -n "...Large Page NAND..." ; \ 2384 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ 2385 fi ; \ 2386 if [ "$(findstring _SP_,$@)" ] ; then \ 2387 $(XECHO) -n "...Small Page NAND..." ; \ 2388 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ 2389 fi ; 2390 @$(MKCONFIG) -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon 2391 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 2392 2393TQM834x_config: unconfig 2394 @$(MKCONFIG) $(@:_config=) powerpc mpc83xx tqm834x tqc 2395 2396caddy2_config \ 2397vme8349_config: unconfig 2398 @$(MKCONFIG) -t $(@:_config=) vme8349 powerpc mpc83xx vme8349 esd 2399 2400edb9301_config \ 2401edb9302_config \ 2402edb9302a_config \ 2403edb9307_config \ 2404edb9307a_config \ 2405edb9312_config \ 2406edb9315_config \ 2407edb9315a_config: unconfig 2408 @$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx 2409 2410######################################################################### 2411## MPC85xx Systems 2412######################################################################### 2413 2414ATUM8548_config: unconfig 2415 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx atum8548 2416 2417MPC8536DS_NAND_config \ 2418MPC8536DS_SDCARD_config \ 2419MPC8536DS_SPIFLASH_config \ 2420MPC8536DS_36BIT_config \ 2421MPC8536DS_config: unconfig 2422 @$(MKCONFIG) -t $(@:_config=) MPC8536DS powerpc mpc85xx mpc8536ds freescale 2423 2424MPC8540ADS_config: unconfig 2425 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8540ads freescale 2426 2427MPC8540EVAL_config \ 2428MPC8540EVAL_33_config \ 2429MPC8540EVAL_66_config \ 2430MPC8540EVAL_33_slave_config \ 2431MPC8540EVAL_66_slave_config: unconfig 2432 @mkdir -p $(obj)include 2433 @if [ "$(findstring _33_,$@)" ] ; then \ 2434 $(XECHO) "... 33 MHz PCI" ; \ 2435 else \ 2436 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ 2437 $(XECHO) "... 66 MHz PCI" ; \ 2438 fi ; \ 2439 if [ "$(findstring _slave_,$@)" ] ; then \ 2440 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ 2441 $(XECHO) " slave" ; \ 2442 else \ 2443 $(XECHO) " host" ; \ 2444 fi 2445 @$(MKCONFIG) -a MPC8540EVAL powerpc mpc85xx mpc8540eval 2446 2447MPC8560ADS_config: unconfig 2448 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8560ads freescale 2449 2450MPC8541CDS_legacy_config \ 2451MPC8541CDS_config: unconfig 2452 @mkdir -p $(obj)include 2453 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2454 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2455 $(XECHO) "... legacy" ; \ 2456 fi 2457 @$(MKCONFIG) -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale 2458 2459MPC8544DS_config: unconfig 2460 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8544ds freescale 2461 2462MPC8548CDS_legacy_config \ 2463MPC8548CDS_config: unconfig 2464 @mkdir -p $(obj)include 2465 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2466 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2467 $(XECHO) "... legacy" ; \ 2468 fi 2469 @$(MKCONFIG) -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale 2470 2471MPC8555CDS_legacy_config \ 2472MPC8555CDS_config: unconfig 2473 @mkdir -p $(obj)include 2474 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2475 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2476 $(XECHO) "... legacy" ; \ 2477 fi 2478 @$(MKCONFIG) -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale 2479 2480MPC8568MDS_config: unconfig 2481 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx mpc8568mds freescale 2482 2483MPC8569MDS_ATM_config \ 2484MPC8569MDS_NAND_config \ 2485MPC8569MDS_config: unconfig 2486 @$(MKCONFIG) -t $(@:_config=) MPC8569MDS powerpc mpc85xx mpc8569mds freescale 2487 2488MPC8572DS_36BIT_config \ 2489MPC8572DS_config: unconfig 2490 @$(MKCONFIG) -t $(@:_config=) MPC8572DS powerpc mpc85xx mpc8572ds freescale 2491 2492P2020DS_36BIT_config \ 2493P2020DS_config: unconfig 2494 @$(MKCONFIG) -t $(@:_config=) P2020DS powerpc mpc85xx p2020ds freescale 2495 2496P1011RDB_config \ 2497P1011RDB_NAND_config \ 2498P1011RDB_SDCARD_config \ 2499P1011RDB_SPIFLASH_config \ 2500P1020RDB_config \ 2501P1020RDB_NAND_config \ 2502P1020RDB_SDCARD_config \ 2503P1020RDB_SPIFLASH_config \ 2504P2010RDB_config \ 2505P2010RDB_NAND_config \ 2506P2010RDB_SDCARD_config \ 2507P2010RDB_SPIFLASH_config \ 2508P2020RDB_config \ 2509P2020RDB_NAND_config \ 2510P2020RDB_SDCARD_config \ 2511P2020RDB_SPIFLASH_config: unconfig 2512 @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale 2513 2514PM854_config: unconfig 2515 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm854 2516 2517PM856_config: unconfig 2518 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx pm856 2519 2520sbc8540_config \ 2521sbc8540_33_config \ 2522sbc8540_66_config: unconfig 2523 @$(MKCONFIG) -t $(@:_config=) SBC8540 powerpc mpc85xx sbc8560 2524 2525sbc8548_config \ 2526sbc8548_PCI_33_config \ 2527sbc8548_PCI_66_config \ 2528sbc8548_PCI_33_PCIE_config \ 2529sbc8548_PCI_66_PCIE_config: unconfig 2530 @$(MKCONFIG) -t $(@:_config=) sbc8548 powerpc mpc85xx sbc8548 2531 2532sbc8560_config \ 2533sbc8560_33_config \ 2534sbc8560_66_config: unconfig 2535 @$(MKCONFIG) -t $(@:_config=) sbc8560 powerpc mpc85xx sbc8560 2536 2537socrates_config: unconfig 2538 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx socrates 2539 2540stxgp3_config: unconfig 2541 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx stxgp3 stx 2542 2543stxssa_config \ 2544stxssa_4M_config: unconfig 2545 @mkdir -p $(obj)include 2546 @if [ "$(findstring _4M_,$@)" ] ; then \ 2547 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ 2548 $(XECHO) "... with 4 MiB flash memory" ; \ 2549 fi 2550 @$(MKCONFIG) -a stxssa powerpc mpc85xx stxssa stx 2551 2552TQM8540_config \ 2553TQM8541_config \ 2554TQM8548_config \ 2555TQM8548_AG_config \ 2556TQM8548_BE_config \ 2557TQM8555_config \ 2558TQM8560_config: unconfig 2559 @mkdir -p $(obj)include 2560 @BTYPE=$(@:_config=); \ 2561 CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ 2562 $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \ 2563 echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ 2564 echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ 2565 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ 2566 echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; 2567 @$(MKCONFIG) -a TQM85xx powerpc mpc85xx tqm85xx tqc 2568 @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; 2569 2570XPEDITE5200_config: unconfig 2571 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5200 xes 2572 2573XPEDITE5370_config: unconfig 2574 @$(MKCONFIG) $(@:_config=) powerpc mpc85xx xpedite5370 xes 2575 2576######################################################################### 2577## MPC86xx Systems 2578######################################################################### 2579 2580MPC8610HPCD_config: unconfig 2581 @$(MKCONFIG) $(@:_config=) powerpc mpc86xx mpc8610hpcd freescale 2582 2583MPC8641HPCN_36BIT_config \ 2584MPC8641HPCN_config: unconfig 2585 @mkdir -p $(obj)include 2586 @if [ "$(findstring _36BIT_,$@)" ] ; then \ 2587 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ 2588 $(XECHO) "... enabling 36-bit physical addressing." ; \ 2589 fi 2590 @$(MKCONFIG) -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale 2591 2592sbc8641d_config: unconfig 2593 @$(MKCONFIG) $(@:_config=) powerpc mpc86xx sbc8641d 2594 2595XPEDITE5170_config: unconfig 2596 @$(MKCONFIG) $(@:_config=) powerpc mpc86xx xpedite5170 xes 2597 2598######################################################################### 2599## 74xx/7xx Systems 2600######################################################################### 2601 2602AmigaOneG3SE_config: unconfig 2603 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx AmigaOneG3SE MAI 2604 2605BAB7xx_config: unconfig 2606 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx bab7xx eltec 2607 2608CPCI750_config: unconfig 2609 @$(MKCONFIG) CPCI750 powerpc 74xx_7xx cpci750 esd 2610 2611DB64360_config: unconfig 2612 @$(MKCONFIG) DB64360 powerpc 74xx_7xx db64360 Marvell 2613 2614DB64460_config: unconfig 2615 @$(MKCONFIG) DB64460 powerpc 74xx_7xx db64460 Marvell 2616 2617ELPPC_config: unconfig 2618 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx elppc eltec 2619 2620EVB64260_config \ 2621EVB64260_750CX_config: unconfig 2622 @$(MKCONFIG) EVB64260 powerpc 74xx_7xx evb64260 2623 2624mpc7448hpc2_config: unconfig 2625 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx mpc7448hpc2 freescale 2626 2627P3G4_config: unconfig 2628 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260 2629 2630p3m750_config \ 2631p3m7448_config: unconfig 2632 @mkdir -p $(obj)include 2633 @if [ "$(findstring 750_,$@)" ] ; then \ 2634 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ 2635 else \ 2636 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ 2637 fi 2638 @$(MKCONFIG) -a p3mx powerpc 74xx_7xx p3mx prodrive 2639 2640PCIPPC2_config \ 2641PCIPPC6_config: unconfig 2642 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx pcippc2 2643 2644ppmc7xx_config: unconfig 2645 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx ppmc7xx 2646 2647ZUMA_config: unconfig 2648 @$(MKCONFIG) $(@:_config=) powerpc 74xx_7xx evb64260 2649 2650#======================================================================== 2651# ARM 2652#======================================================================== 2653######################################################################### 2654## StrongARM Systems 2655######################################################################### 2656 2657assabet_config : unconfig 2658 @$(MKCONFIG) $(@:_config=) arm sa1100 assabet 2659 2660dnp1110_config : unconfig 2661 @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 2662 2663gcplus_config : unconfig 2664 @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus 2665 2666lart_config : unconfig 2667 @$(MKCONFIG) $(@:_config=) arm sa1100 lart 2668 2669shannon_config : unconfig 2670 @$(MKCONFIG) $(@:_config=) arm sa1100 shannon 2671 2672######################################################################### 2673## ARM92xT Systems 2674######################################################################### 2675 2676a320evb_config : unconfig 2677 @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320 2678 2679######################################################################### 2680## Atmel AT91RM9200 Systems 2681######################################################################### 2682 2683at91rm9200dk_config : unconfig 2684 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 2685 2686at91rm9200ek_config : unconfig 2687 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200 2688 2689cmc_pu2_config : unconfig 2690 @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 2691 2692CPUAT91_RAM_config \ 2693CPUAT91_config : unconfig 2694 @mkdir -p $(obj)include 2695 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2696 @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 2697 2698csb637_config : unconfig 2699 @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 2700 2701eb_cpux9k2_config : unconfig 2702 @$(MKCONFIG) $(@:_config=) arm arm920t eb_cpux9k2 BuS at91 2703 2704kb9202_config : unconfig 2705 @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 2706 2707m501sk_config : unconfig 2708 @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 2709 2710mp2usb_config : unconfig 2711 @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 2712 2713######################################################################### 2714## ARM926EJ-S Systems 2715######################################################################### 2716 2717afeb9260_config: unconfig 2718 @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91 2719 2720at91cap9adk_config : unconfig 2721 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 2722 2723at91sam9260ek_nandflash_config \ 2724at91sam9260ek_dataflash_cs0_config \ 2725at91sam9260ek_dataflash_cs1_config \ 2726at91sam9260ek_config \ 2727at91sam9g20ek_nandflash_config \ 2728at91sam9g20ek_dataflash_cs0_config \ 2729at91sam9g20ek_dataflash_cs1_config \ 2730at91sam9g20ek_config : unconfig 2731 @mkdir -p $(obj)include 2732 @if [ "$(findstring 9g20,$@)" ] ; then \ 2733 echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ 2734 $(XECHO) "... 9G20 Variant" ; \ 2735 else \ 2736 echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ 2737 fi; 2738 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2739 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2740 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2741 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2742 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2743 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2744 else \ 2745 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2746 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2747 fi; 2748 @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2749 2750at91sam9xeek_nandflash_config \ 2751at91sam9xeek_dataflash_cs0_config \ 2752at91sam9xeek_dataflash_cs1_config \ 2753at91sam9xeek_config : unconfig 2754 @mkdir -p $(obj)include 2755 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2756 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2757 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2758 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2759 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2760 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2761 else \ 2762 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ 2763 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ 2764 fi; 2765 @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 2766 2767at91sam9261ek_nandflash_config \ 2768at91sam9261ek_dataflash_cs0_config \ 2769at91sam9261ek_dataflash_cs3_config \ 2770at91sam9261ek_config \ 2771at91sam9g10ek_nandflash_config \ 2772at91sam9g10ek_dataflash_cs0_config \ 2773at91sam9g10ek_dataflash_cs3_config \ 2774at91sam9g10ek_config : unconfig 2775 @mkdir -p $(obj)include 2776 @if [ "$(findstring 9g10,$@)" ] ; then \ 2777 echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ 2778 $(XECHO) "... 9G10 Variant" ; \ 2779 else \ 2780 echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ 2781 fi; 2782 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2783 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2784 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2785 elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ 2786 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ 2787 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ 2788 else \ 2789 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ 2790 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2791 fi; 2792 @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 2793 2794at91sam9263ek_norflash_config \ 2795at91sam9263ek_norflash_boot_config \ 2796at91sam9263ek_nandflash_config \ 2797at91sam9263ek_dataflash_config \ 2798at91sam9263ek_dataflash_cs0_config \ 2799at91sam9263ek_config : unconfig 2800 @mkdir -p $(obj)include 2801 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2802 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2803 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2804 elif [ "$(findstring norflash,$@)" ] ; then \ 2805 echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ 2806 $(XECHO) "... with environment variable in NOR FLASH" ; \ 2807 else \ 2808 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2809 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2810 fi; 2811 @if [ "$(findstring norflash_boot,$@)" ] ; then \ 2812 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ 2813 $(XECHO) "... and boot from NOR FLASH" ; \ 2814 fi; 2815 @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 2816 2817at91sam9rlek_nandflash_config \ 2818at91sam9rlek_dataflash_config \ 2819at91sam9rlek_dataflash_cs0_config \ 2820at91sam9rlek_config : unconfig 2821 @mkdir -p $(obj)include 2822 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2823 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2824 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2825 else \ 2826 echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ 2827 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2828 fi; 2829 @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 2830 2831CPU9G20_128M_config \ 2832CPU9G20_config \ 2833CPU9260_128M_config \ 2834CPU9260_config : unconfig 2835 @mkdir -p $(obj)include 2836 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2837 @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91 2838 2839meesc_config : unconfig 2840 @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 2841 2842pm9261_config : unconfig 2843 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 2844 2845at91sam9m10g45ek_nandflash_config \ 2846at91sam9m10g45ek_dataflash_config \ 2847at91sam9m10g45ek_dataflash_cs0_config \ 2848at91sam9m10g45ek_config \ 2849at91sam9g45ekes_nandflash_config \ 2850at91sam9g45ekes_dataflash_config \ 2851at91sam9g45ekes_dataflash_cs0_config \ 2852at91sam9g45ekes_config : unconfig 2853 @mkdir -p $(obj)include 2854 @if [ "$(findstring 9m10,$@)" ] ; then \ 2855 echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ 2856 $(XECHO) "... 9M10G45 Variant" ; \ 2857 else \ 2858 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ 2859 fi; 2860 2861 @if [ "$(findstring _nandflash,$@)" ] ; then \ 2862 echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ 2863 $(XECHO) "... with environment variable in NAND FLASH" ; \ 2864 else \ 2865 echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ 2866 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ 2867 fi; 2868 @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 2869 2870otc570_config : unconfig 2871 @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91 2872 2873pm9263_config : unconfig 2874 @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 2875 2876SBC35_A9G20_NANDFLASH_config \ 2877SBC35_A9G20_EEPROM_config \ 2878SBC35_A9G20_config : unconfig 2879 @mkdir -p $(obj)include 2880 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2881 @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 2882 2883TNY_A9G20_NANDFLASH_config \ 2884TNY_A9G20_EEPROM_config \ 2885TNY_A9G20_config \ 2886TNY_A9260_NANDFLASH_config \ 2887TNY_A9260_EEPROM_config \ 2888TNY_A9260_config : unconfig 2889 @mkdir -p $(obj)include 2890 @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 2891 @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91 2892 2893######################################################################## 2894## ARM Integrator boards - see doc/README-integrator for more info. 2895integratorap_config \ 2896ap_config \ 2897ap966_config \ 2898ap922_config \ 2899ap922_XA10_config \ 2900ap7_config \ 2901ap720t_config \ 2902ap920t_config \ 2903ap926ejs_config \ 2904ap946es_config: unconfig 2905 @board/armltd/integrator/split_by_variant.sh ap $@ 2906 2907integratorcp_config \ 2908cp_config \ 2909cp920t_config \ 2910cp926ejs_config \ 2911cp946es_config \ 2912cp1136_config \ 2913cp966_config \ 2914cp922_config \ 2915cp922_XA10_config \ 2916cp1026_config: unconfig 2917 @board/armltd/integrator/split_by_variant.sh cp $@ 2918 2919da830evm_config \ 2920da850evm_config: unconfig 2921 @$(MKCONFIG) $(@:_config=) arm arm926ejs da8xxevm davinci davinci 2922 2923davinci_dvevm_config : unconfig 2924 @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci 2925 2926davinci_schmoogie_config : unconfig 2927 @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci 2928 2929davinci_sffsdr_config : unconfig 2930 @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci 2931 2932davinci_sonata_config : unconfig 2933 @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci 2934 2935davinci_dm355evm_config : unconfig 2936 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci 2937 2938davinci_dm355leopard_config : unconfig 2939 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci 2940 2941davinci_dm365evm_config : unconfig 2942 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci 2943 2944davinci_dm6467evm_config : unconfig 2945 @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci 2946 2947guruplug_config: unconfig 2948 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2949 2950magnesium_config \ 2951imx27lite_config: unconfig 2952 @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 2953 2954lpd7a400_config \ 2955lpd7a404_config: unconfig 2956 @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x 2957 2958mv88f6281gtw_ge_config: unconfig 2959 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 2960 2961mx1ads_config : unconfig 2962 @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx 2963 2964mx1fs2_config : unconfig 2965 @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx 2966 2967netstar_config: unconfig 2968 @$(MKCONFIG) $(@:_config=) arm arm925t netstar 2969 2970nhk8815_config \ 2971nhk8815_onenand_config: unconfig 2972 @mkdir -p $(obj)include 2973 @ > $(obj)include/config.h 2974 @if [ "$(findstring _onenand, $@)" ] ; then \ 2975 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ 2976 $(XECHO) "... configured to boot from OneNand Flash"; \ 2977 else \ 2978 $(XECHO) "... configured to boot from Nand Flash"; \ 2979 fi 2980 @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik 2981 2982omap1510inn_config : unconfig 2983 @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti 2984 2985xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 2986 2987omap1610inn_config \ 2988omap1610inn_cs0boot_config \ 2989omap1610inn_cs3boot_config \ 2990omap1610inn_cs_autoboot_config \ 2991omap1610h2_config \ 2992omap1610h2_cs0boot_config \ 2993omap1610h2_cs3boot_config \ 2994omap1610h2_cs_autoboot_config: unconfig 2995 @mkdir -p $(obj)include 2996 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2997 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ 2998 $(XECHO) "... configured for CS0 boot"; \ 2999 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 3000 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ 3001 $(XECHO) "... configured for CS_AUTO boot"; \ 3002 else \ 3003 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 3004 $(XECHO) "... configured for CS3 boot"; \ 3005 fi; 3006 @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap 3007 3008omap5912osk_config : unconfig 3009 @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap 3010 3011openrd_base_config: unconfig 3012 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 3013 3014xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 3015 3016omap730p2_config \ 3017omap730p2_cs0boot_config \ 3018omap730p2_cs3boot_config : unconfig 3019 @mkdir -p $(obj)include 3020 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 3021 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ 3022 $(XECHO) "... configured for CS0 boot"; \ 3023 else \ 3024 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 3025 $(XECHO) "... configured for CS3 boot"; \ 3026 fi; 3027 @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap 3028 3029rd6281a_config: unconfig 3030 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 3031 3032sbc2410x_config: unconfig 3033 @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 3034 3035scb9328_config : unconfig 3036 @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx 3037 3038sheevaplug_config: unconfig 3039 @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood 3040 3041smdk2400_config : unconfig 3042 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 3043 3044smdk2410_config : unconfig 3045 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0 3046 3047spear300_config \ 3048spear310_config \ 3049spear320_config : unconfig 3050 @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx arm arm926ejs $(@:_config=) spear spear 3051 3052spear600_config : unconfig 3053 @$(MKCONFIG) -n $@ -t $(@:_config=) spear6xx arm arm926ejs $(@:_config=) spear spear 3054 3055suen3_config: unconfig 3056 @$(MKCONFIG) $(@:_config=) arm arm926ejs km_arm keymile kirkwood 3057 3058SX1_stdout_serial_config \ 3059SX1_config: unconfig 3060 @mkdir -p $(obj)include 3061 @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ 3062 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 3063 $(XECHO) "... configured for stdout serial"; \ 3064 else \ 3065 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ 3066 $(XECHO) "... configured for stdout usbtty"; \ 3067 fi; 3068 @$(MKCONFIG) SX1 arm arm925t sx1 3069 3070# TRAB default configuration: 8 MB Flash, 32 MB RAM 3071xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 3072 3073trab_config \ 3074trab_bigram_config \ 3075trab_bigflash_config \ 3076trab_old_config: unconfig 3077 @mkdir -p $(obj)include 3078 @mkdir -p $(obj)board/trab 3079 @[ -z "$(findstring _bigram,$@)" ] || \ 3080 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 3081 echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ 3082 $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ 3083 } 3084 @[ -z "$(findstring _bigflash,$@)" ] || \ 3085 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ 3086 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 3087 $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ 3088 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 3089 } 3090 @[ -z "$(findstring _old,$@)" ] || \ 3091 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 3092 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 3093 $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ 3094 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 3095 } 3096 @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 3097 3098tx25_config : unconfig 3099 @$(MKCONFIG) $(@:_config=) arm arm926ejs tx25 karo mx25 3100 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 3101 3102VCMA9_config : unconfig 3103 @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 3104 3105######################################################################### 3106# ARM supplied Versatile development boards 3107######################################################################### 3108 3109cm4008_config : unconfig 3110 @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 3111 3112cm41xx_config : unconfig 3113 @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 3114 3115versatile_config \ 3116versatileab_config \ 3117versatilepb_config : unconfig 3118 @board/armltd/versatile/split_by_variant.sh $@ 3119 3120voiceblue_config: unconfig 3121 @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue 3122 3123######################################################################### 3124## S3C44B0 Systems 3125######################################################################### 3126 3127B2_config : unconfig 3128 @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave 3129 3130######################################################################### 3131## ARM720T Systems 3132######################################################################### 3133 3134armadillo_config: unconfig 3135 @$(MKCONFIG) $(@:_config=) arm arm720t armadillo 3136 3137ep7312_config : unconfig 3138 @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 3139 3140impa7_config : unconfig 3141 @$(MKCONFIG) $(@:_config=) arm arm720t impa7 3142 3143modnet50_config : unconfig 3144 @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 3145 3146evb4510_config : unconfig 3147 @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b 3148 3149lpc2292sodimm_config: unconfig 3150 @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 3151 3152SMN42_config : unconfig 3153 @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 3154 3155######################################################################### 3156## ARM CORTEX Systems 3157######################################################################### 3158 3159am3517_evm_config : unconfig 3160 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 am3517evm logicpd omap3 3161 3162devkit8000_config : unconfig 3163 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3 3164 3165omap3_beagle_config : unconfig 3166 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3 3167 3168omap3_overo_config : unconfig 3169 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3 3170 3171omap3_evm_config : unconfig 3172 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3 3173 3174omap3_pandora_config : unconfig 3175 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3 3176 3177omap3_sdp3430_config : unconfig 3178 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3 3179 3180omap3_zoom1_config : unconfig 3181 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3 3182 3183omap3_zoom2_config : unconfig 3184 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3 3185 3186smdkc100_config: unconfig 3187 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx 3188 3189######################################################################### 3190## XScale Systems 3191######################################################################### 3192 3193actux1_config : unconfig 3194 @$(MKCONFIG) $(@:_config=) arm ixp actux1 3195 3196actux2_config : unconfig 3197 @$(MKCONFIG) $(@:_config=) arm ixp actux2 3198 3199actux3_config : unconfig 3200 @$(MKCONFIG) $(@:_config=) arm ixp actux3 3201 3202actux4_config : unconfig 3203 @$(MKCONFIG) $(@:_config=) arm ixp actux4 3204 3205cerf250_config : unconfig 3206 @$(MKCONFIG) $(@:_config=) arm pxa cerf250 3207 3208cradle_config : unconfig 3209 @$(MKCONFIG) $(@:_config=) arm pxa cradle 3210 3211csb226_config : unconfig 3212 @$(MKCONFIG) $(@:_config=) arm pxa csb226 3213 3214delta_config : unconfig 3215 @$(MKCONFIG) $(@:_config=) arm pxa delta 3216 3217innokom_config : unconfig 3218 @$(MKCONFIG) $(@:_config=) arm pxa innokom 3219 3220ixdp425_config : unconfig 3221 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3222 3223ixdpg425_config : unconfig 3224 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 3225 3226lubbock_config : unconfig 3227 @$(MKCONFIG) $(@:_config=) arm pxa lubbock 3228 3229pleb2_config : unconfig 3230 @$(MKCONFIG) $(@:_config=) arm pxa pleb2 3231 3232logodl_config : unconfig 3233 @$(MKCONFIG) $(@:_config=) arm pxa logodl 3234 3235pdnb3_config \ 3236scpu_config: unconfig 3237 @mkdir -p $(obj)include 3238 @if [ "$(findstring scpu_,$@)" ] ; then \ 3239 echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ 3240 $(XECHO) "... on SCPU board variant" ; \ 3241 fi 3242 @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive 3243 3244pxa255_idp_config: unconfig 3245 @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp 3246 3247polaris_config \ 3248trizepsiv_config : unconfig 3249 @mkdir -p $(obj)include 3250 @if [ "$(findstring polaris,$@)" ] ; then \ 3251 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ 3252 fi; 3253 @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv 3254 3255wepep250_config : unconfig 3256 @$(MKCONFIG) $(@:_config=) arm pxa wepep250 3257 3258xaeniax_config : unconfig 3259 @$(MKCONFIG) $(@:_config=) arm pxa xaeniax 3260 3261xm250_config : unconfig 3262 @$(MKCONFIG) $(@:_config=) arm pxa xm250 3263 3264xsengine_config : unconfig 3265 @$(MKCONFIG) $(@:_config=) arm pxa xsengine 3266 3267zylonite_config : 3268 @$(MKCONFIG) $(@:_config=) arm pxa zylonite 3269 3270######################################################################### 3271## ARM1136 Systems 3272######################################################################### 3273 3274apollon_config : unconfig 3275 @mkdir -p $(obj)include 3276 @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h 3277 @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx 3278 @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk 3279 3280imx31_litekit_config : unconfig 3281 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31 3282 3283imx31_phycore_eet_config \ 3284imx31_phycore_config : unconfig 3285 @mkdir -p $(obj)include 3286 @if [ -n "$(findstring _eet_,$@)" ]; then \ 3287 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ 3288 fi 3289 @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 3290 3291mx31ads_config : unconfig 3292 @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 3293 3294mx31pdk_config \ 3295mx31pdk_nand_config : unconfig 3296 @mkdir -p $(obj)include 3297 @if [ -n "$(findstring _nand_,$@)" ]; then \ 3298 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ 3299 else \ 3300 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ 3301 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ 3302 fi 3303 @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 3304 3305mx51evk_config : unconfig 3306 @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx51evk freescale mx51 3307 3308omap2420h4_config : unconfig 3309 @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx 3310 3311qong_config : unconfig 3312 @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 3313 3314######################################################################### 3315## ARM1176 Systems 3316######################################################################### 3317smdk6400_noUSB_config \ 3318smdk6400_config : unconfig 3319 @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 3320 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 3321 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 3322 @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ 3323 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3324 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3325 else \ 3326 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 3327 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 3328 fi 3329 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 3330 3331tnetv107x_evm_config: unconfig 3332 @$(MKCONFIG) $(@:_config=) arm arm1176 tnetv107xevm ti tnetv107x 3333 3334#======================================================================== 3335# i386 3336#======================================================================== 3337######################################################################### 3338## AMD SC520 CDP 3339######################################################################### 3340eNET_config : unconfig 3341 @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520 3342 3343sc520_cdp_config : unconfig 3344 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520 3345 3346sc520_spunk_config : unconfig 3347 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3348 3349sc520_spunk_rel_config : unconfig 3350 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520 3351 3352#======================================================================== 3353# MIPS 3354#======================================================================== 3355######################################################################### 3356## MIPS32 4Kc 3357######################################################################### 3358 3359xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 3360 3361incaip_100MHz_config \ 3362incaip_133MHz_config \ 3363incaip_150MHz_config \ 3364incaip_config: unconfig 3365 @mkdir -p $(obj)include 3366 @[ -z "$(findstring _100MHz,$@)" ] || \ 3367 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ 3368 $(XECHO) "... with 100MHz system clock" ; \ 3369 } 3370 @[ -z "$(findstring _133MHz,$@)" ] || \ 3371 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ 3372 $(XECHO) "... with 133MHz system clock" ; \ 3373 } 3374 @[ -z "$(findstring _150MHz,$@)" ] || \ 3375 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ 3376 $(XECHO) "... with 150MHz system clock" ; \ 3377 } 3378 @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip 3379 3380tb0229_config: unconfig 3381 @$(MKCONFIG) $(@:_config=) mips mips tb0229 3382 3383vct_premium_config \ 3384vct_premium_small_config \ 3385vct_premium_onenand_config \ 3386vct_premium_onenand_small_config \ 3387vct_platinum_config \ 3388vct_platinum_small_config \ 3389vct_platinum_onenand_config \ 3390vct_platinum_onenand_small_config \ 3391vct_platinumavc_config \ 3392vct_platinumavc_small_config \ 3393vct_platinumavc_onenand_config \ 3394vct_platinumavc_onenand_small_config: unconfig 3395 @mkdir -p $(obj)include 3396 @if [ "$(findstring _premium,$@)" ] ; then \ 3397 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \ 3398 $(XECHO) "... on Premium board variant" ; \ 3399 fi 3400 @if [ "$(findstring _platinum_,$@)" ] ; then \ 3401 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \ 3402 $(XECHO) "... on Platinum board variant" ; \ 3403 fi 3404 @if [ "$(findstring _platinumavc,$@)" ] ; then \ 3405 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \ 3406 $(XECHO) "... on PlatinumAVC board variant" ; \ 3407 fi 3408 @if [ "$(findstring _onenand,$@)" ] ; then \ 3409 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \ 3410 $(XECHO) "... on OneNAND board variant" ; \ 3411 fi 3412 @if [ "$(findstring _small,$@)" ] ; then \ 3413 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \ 3414 $(XECHO) "... stripped down image variant" ; \ 3415 fi 3416 @$(MKCONFIG) -a vct mips mips vct micronas 3417 3418######################################################################### 3419## MIPS32 AU1X00 3420######################################################################### 3421 3422dbau1000_config : unconfig 3423 @mkdir -p $(obj)include 3424 @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h 3425 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3426 3427dbau1100_config : unconfig 3428 @mkdir -p $(obj)include 3429 @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h 3430 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3431 3432dbau1500_config : unconfig 3433 @mkdir -p $(obj)include 3434 @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h 3435 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3436 3437dbau1550_config : unconfig 3438 @mkdir -p $(obj)include 3439 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3440 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3441 3442dbau1550_el_config : unconfig 3443 @mkdir -p $(obj)include 3444 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 3445 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 3446 3447gth2_config : unconfig 3448 @mkdir -p $(obj)include 3449 @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h 3450 @$(MKCONFIG) -a gth2 mips mips gth2 3451 3452pb1000_config : unconfig 3453 @mkdir -p $(obj)include 3454 @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h 3455 @$(MKCONFIG) -a pb1x00 mips mips pb1x00 3456 3457qemu_mips_config : unconfig 3458 @mkdir -p $(obj)include 3459 @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h 3460 @$(MKCONFIG) -a qemu-mips mips mips qemu-mips 3461 3462######################################################################### 3463## MIPS64 5Kc 3464######################################################################### 3465 3466purple_config : unconfig 3467 @$(MKCONFIG) $(@:_config=) mips mips purple 3468 3469#======================================================================== 3470# Nios 3471#======================================================================== 3472 3473######################################################################### 3474## Nios-II 3475######################################################################### 3476 3477EP1C20_config : unconfig 3478 @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera 3479 3480EP1S10_config : unconfig 3481 @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera 3482 3483EP1S40_config : unconfig 3484 @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera 3485 3486PK1C20_config : unconfig 3487 @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent 3488 3489PCI5441_config : unconfig 3490 @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent 3491 3492# nios2 generic boards 3493NIOS2_GENERIC = nios2-generic 3494 3495$(NIOS2_GENERIC:%=%_config) : unconfig 3496 @$(MKCONFIG) $(@:_config=) nios2 nios2 nios2-generic altera 3497 3498#======================================================================== 3499## Microblaze 3500#======================================================================== 3501 3502microblaze-generic_config: unconfig 3503 @mkdir -p $(obj)include 3504 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx 3505 3506#======================================================================== 3507# Blackfin 3508#======================================================================== 3509 3510# Analog Devices boards 3511BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ 3512 bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit 3513 3514# Bluetechnix tinyboards 3515BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 \ 3516 tcm-bf518 tcm-bf537 3517 3518# Misc third party boards 3519BFIN_BOARDS += bf537-minotaur bf537-srv1 bf561-acvilon blackstamp ip04 3520 3521# I-SYST Micromodule 3522BFIN_BOARDS += ibf-dsp561 3523 3524$(BFIN_BOARDS:%=%_config) : unconfig 3525 @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) 3526 3527bf527-ezkit-v2_config : unconfig 3528 @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \ 3529 bf527-ezkit blackfin blackfin bf527-ezkit 3530 3531#======================================================================== 3532# AVR32 3533#======================================================================== 3534 3535atngw100_config : unconfig 3536 @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x 3537 3538atstk1002_config : unconfig 3539 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3540 3541atstk1003_config : unconfig 3542 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3543 3544atstk1004_config : unconfig 3545 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3546 3547atstk1006_config : unconfig 3548 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3549 3550favr-32-ezkit_config : unconfig 3551 @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x 3552 3553hammerhead_config : unconfig 3554 @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x 3555 3556mimc200_config : unconfig 3557 @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x 3558 3559#======================================================================== 3560# SH3 (SuperH) 3561#======================================================================== 3562 3563######################################################################### 3564## sh2 (Renesas SuperH) 3565######################################################################### 3566rsk7203_config: unconfig 3567 @mkdir -p $(obj)include 3568 @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h 3569 @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas 3570 3571######################################################################### 3572## sh3 (Renesas SuperH) 3573######################################################################### 3574 3575mpr2_config: unconfig 3576 @mkdir -p $(obj)include 3577 @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h 3578 @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 3579 3580ms7720se_config: unconfig 3581 @mkdir -p $(obj)include 3582 @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h 3583 @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se 3584 3585######################################################################### 3586## sh4 (Renesas SuperH) 3587######################################################################### 3588 3589MigoR_config : unconfig 3590 @mkdir -p $(obj)include 3591 @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h 3592 @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas 3593 3594ms7750se_config: unconfig 3595 @mkdir -p $(obj)include 3596 @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h 3597 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se 3598 3599ms7722se_config : unconfig 3600 @mkdir -p $(obj)include 3601 @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h 3602 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se 3603 3604r2dplus_config : unconfig 3605 @mkdir -p $(obj)include 3606 @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h 3607 @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas 3608 3609r7780mp_config: unconfig 3610 @mkdir -p $(obj)include 3611 @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h 3612 @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas 3613 3614sh7763rdp_config : unconfig 3615 @mkdir -p $(obj)include 3616 @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h 3617 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas 3618 3619xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) 3620sh7785lcr_32bit_config \ 3621sh7785lcr_config : unconfig 3622 @mkdir -p $(obj)include 3623 @mkdir -p $(obj)board/renesas/sh7785lcr 3624 @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h 3625 @if [ "$(findstring 32bit, $@)" ] ; then \ 3626 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ 3627 echo "TEXT_BASE = 0x8ff80000" > \ 3628 $(obj)board/renesas/sh7785lcr/config.tmp ; \ 3629 $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ 3630 fi 3631 @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas 3632 3633ap325rxa_config : unconfig 3634 @mkdir -p $(obj)include 3635 @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h 3636 @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas 3637 3638espt_config : unconfig 3639 @mkdir -p $(obj)include 3640 @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h 3641 @$(MKCONFIG) -a $(@:_config=) sh sh4 espt 3642 3643#======================================================================== 3644# SPARC 3645#======================================================================== 3646 3647######################################################################### 3648## LEON3 3649######################################################################### 3650 3651# Gaisler GR-XC3S-1500 board 3652gr_xc3s_1500_config : unconfig 3653 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler 3654 3655# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system 3656gr_cpci_ax2000_config : unconfig 3657 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler 3658 3659# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS 3660# Development board Stratix II edition, FPGA Device EP2S60. 3661gr_ep2s60_config: unconfig 3662 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler 3663 3664# Gaisler LEON3 GRSIM simulator 3665grsim_config : unconfig 3666 @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler 3667 3668######################################################################### 3669## LEON2 3670######################################################################### 3671 3672# Gaisler LEON2 GRSIM simulator 3673grsim_leon2_config : unconfig 3674 @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler 3675 3676######################################################################### 3677######################################################################### 3678######################################################################### 3679 3680clean: 3681 @rm -f $(obj)examples/standalone/82559_eeprom \ 3682 $(obj)examples/standalone/atmel_df_pow2 \ 3683 $(obj)examples/standalone/eepro100_eeprom \ 3684 $(obj)examples/standalone/hello_world \ 3685 $(obj)examples/standalone/interrupt \ 3686 $(obj)examples/standalone/mem_to_mem_idma2intr \ 3687 $(obj)examples/standalone/sched \ 3688 $(obj)examples/standalone/smc91111_eeprom \ 3689 $(obj)examples/standalone/test_burst \ 3690 $(obj)examples/standalone/timer 3691 @rm -f $(obj)examples/api/demo{,.bin} 3692 @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ 3693 $(obj)tools/env/{fw_printenv,fw_setenv} \ 3694 $(obj)tools/envcrc \ 3695 $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ 3696 $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ 3697 $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ 3698 $(obj)tools/ncb $(obj)tools/ubsha1 3699 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ 3700 $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ 3701 $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ 3702 $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ 3703 $(obj)arch/blackfin/lib/u-boot.lds \ 3704 $(obj)u-boot.lds \ 3705 $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] 3706 @rm -f $(obj)include/bmp_logo.h 3707 @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} 3708 @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map} 3709 @rm -f $(ONENAND_BIN) 3710 @rm -f $(obj)onenand_ipl/u-boot.lds 3711 @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) 3712 @find $(OBJTREE) -type f \ 3713 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 3714 -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ 3715 | xargs rm -f 3716 3717clobber: clean 3718 @find $(OBJTREE) -type f \( -name .depend \ 3719 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 3720 -print0 \ 3721 | xargs -0 rm -f 3722 @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ 3723 $(obj)cscope.* $(obj)*.*~ 3724 @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) 3725 @rm -f $(obj)u-boot.kwb 3726 @rm -f $(obj)u-boot.imx 3727 @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} 3728 @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c 3729 @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm 3730 @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f 3731 @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f 3732 3733ifeq ($(OBJTREE),$(SRCTREE)) 3734mrproper \ 3735distclean: clobber unconfig 3736else 3737mrproper \ 3738distclean: clobber unconfig 3739 rm -rf $(obj)* 3740endif 3741 3742backup: 3743 F=`basename $(TOPDIR)` ; cd .. ; \ 3744 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 3745 3746######################################################################### 3747