1# 2# (C) Copyright 2000, 2001, 2002 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundation; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24HOSTARCH := $(shell uname -m | \ 25 sed -e s/i.86/i386/ \ 26 -e s/sun4u/sparc64/ \ 27 -e s/arm.*/arm/ \ 28 -e s/sa110/arm/ \ 29 -e s/powerpc/ppc/ \ 30 -e s/macppc/ppc/) 31 32HOSTOS := $(shell uname -s | tr A-Z a-z | \ 33 sed -e 's/\(cygwin\).*/cygwin/') 34 35export HOSTARCH 36 37# Deal with colliding definitions from tcsh etc. 38VENDOR= 39 40######################################################################### 41 42TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) 43export TOPDIR 44 45ifeq (include/config.mk,$(wildcard include/config.mk)) 46# load ARCH, BOARD, and CPU configuration 47include include/config.mk 48export ARCH CPU BOARD VENDOR 49# load other configuration 50include $(TOPDIR)/config.mk 51 52ifndef CROSS_COMPILE 53ifeq ($(HOSTARCH),ppc) 54CROSS_COMPILE = 55else 56ifeq ($(ARCH),ppc) 57CROSS_COMPILE = ppc_8xx- 58endif 59ifeq ($(ARCH),arm) 60CROSS_COMPILE = arm-linux- 61endif 62ifeq ($(ARCH),i386) 63ifeq ($(HOSTARCH),i386) 64CROSS_COMPILE = 65else 66CROSS_COMPILE = i386-linux- 67endif 68endif 69ifeq ($(ARCH),mips) 70CROSS_COMPILE = mips_4KC- 71endif 72endif 73endif 74 75export CROSS_COMPILE 76 77# The "tools" are needed early, so put this first 78SUBDIRS = tools \ 79 lib_generic \ 80 lib_$(ARCH) \ 81 cpu/$(CPU) \ 82 board/$(BOARDDIR) \ 83 common \ 84 disk \ 85 fs \ 86 net \ 87 rtc \ 88 dtt \ 89 drivers \ 90 post \ 91 post/cpu \ 92 examples 93 94######################################################################### 95# U-Boot objects....order is important (i.e. start must be first) 96 97OBJS = cpu/$(CPU)/start.o 98ifeq ($(CPU),i386) 99OBJS += cpu/$(CPU)/start16.o 100OBJS += cpu/$(CPU)/reset.o 101endif 102ifeq ($(CPU),ppc4xx) 103OBJS += cpu/$(CPU)/resetvec.o 104endif 105 106LIBS = board/$(BOARDDIR)/lib$(BOARD).a 107LIBS += cpu/$(CPU)/lib$(CPU).a 108LIBS += lib_$(ARCH)/lib$(ARCH).a 109LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a fs/fat/libfat.a 110LIBS += net/libnet.a 111LIBS += disk/libdisk.a 112LIBS += rtc/librtc.a 113LIBS += dtt/libdtt.a 114LIBS += drivers/libdrivers.a 115LIBS += post/libpost.a post/cpu/libcpu.a 116LIBS += common/libcommon.a 117LIBS += lib_generic/libgeneric.a 118 119######################################################################### 120 121all: u-boot.srec u-boot.bin System.map 122 123install: all 124 -cp u-boot.bin /tftpboot/u-boot.bin 125 -cp u-boot.bin /net/denx/tftpboot/u-boot.bin 126 127u-boot.srec: u-boot 128 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ 129 130u-boot.bin: u-boot 131 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 132 133u-boot.dis: u-boot 134 $(OBJDUMP) -d $< > $@ 135 136u-boot: depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT) 137 $(LD) $(LDFLAGS) $(OBJS) \ 138 --start-group $(LIBS) --end-group \ 139 -Map u-boot.map -o u-boot 140 141subdirs: 142 @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done 143 144depend dep: 145 @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done 146 147tags: 148 ctags -w `find $(SUBDIRS) include \ 149 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` 150 151etags: 152 etags -a `find $(SUBDIRS) include \ 153 \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` 154 155System.map: u-boot 156 @$(NM) $< | \ 157 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 158 sort > System.map 159 160######################################################################### 161else 162all install u-boot u-boot.srec depend dep: 163 @echo "System not configured - see README" >&2 164 @ exit 1 165endif 166 167######################################################################### 168 169unconfig: 170 rm -f include/config.h include/config.mk 171 172#======================================================================== 173# PowerPC 174#======================================================================== 175 176######################################################################### 177## MPC5xx Systems 178######################################################################### 179 180cmi_mpc5xx_config: unconfig 181 @./mkconfig $(@:_config=) ppc mpc5xx cmi 182 183######################################################################### 184## MPC8xx Systems 185######################################################################### 186 187ADS860_config: unconfig 188 @./mkconfig $(@:_config=) ppc mpc8xx fads 189 190AMX860_config : unconfig 191 @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel 192 193c2mon_config: unconfig 194 @./mkconfig $(@:_config=) ppc mpc8xx c2mon 195 196CCM_config: unconfig 197 @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens 198 199cogent_mpc8xx_config: unconfig 200 @./mkconfig $(@:_config=) ppc mpc8xx cogent 201 202ELPT860_config: unconfig 203 @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX 204 205ESTEEM192E_config: unconfig 206 @./mkconfig $(@:_config=) ppc mpc8xx esteem192e 207 208ETX094_config : unconfig 209 @./mkconfig $(@:_config=) ppc mpc8xx etx094 210 211FADS823_config \ 212FADS850SAR_config \ 213FADS860T_config: unconfig 214 @./mkconfig $(@:_config=) ppc mpc8xx fads 215 216FLAGADM_config: unconfig 217 @./mkconfig $(@:_config=) ppc mpc8xx flagadm 218 219xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 220 221GEN860T_SC_config \ 222GEN860T_config: unconfig 223 @ >include/config.h 224 @[ -z "$(findstring _SC,$@)" ] || \ 225 { echo "#define CONFIG_SC" >>include/config.h ; \ 226 echo "With reduced H/W feature set (SC)..." ; \ 227 } 228 @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 229 230GENIETV_config: unconfig 231 @./mkconfig $(@:_config=) ppc mpc8xx genietv 232 233GTH_config: unconfig 234 @./mkconfig $(@:_config=) ppc mpc8xx gth 235 236hermes_config : unconfig 237 @./mkconfig $(@:_config=) ppc mpc8xx hermes 238 239IAD210_config: unconfig 240 @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens 241 242xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 243 244ICU862_100MHz_config \ 245ICU862_config: unconfig 246 @ >include/config.h 247 @[ -z "$(findstring _100MHz,$@)" ] || \ 248 { echo "#define CONFIG_100MHz" >>include/config.h ; \ 249 echo "... with 100MHz system clock" ; \ 250 } 251 @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 252 253IP860_config : unconfig 254 @./mkconfig $(@:_config=) ppc mpc8xx ip860 255 256IVML24_256_config \ 257IVML24_128_config \ 258IVML24_config: unconfig 259 @ >include/config.h 260 @[ -z "$(findstring IVML24_config,$@)" ] || \ 261 { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ 262 } 263 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 264 { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ 265 } 266 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 267 { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ 268 } 269 @./mkconfig -a IVML24 ppc mpc8xx ivm 270 271IVMS8_256_config \ 272IVMS8_128_config \ 273IVMS8_config: unconfig 274 @ >include/config.h 275 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 276 { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ 277 } 278 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 279 { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ 280 } 281 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 282 { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ 283 } 284 @./mkconfig -a IVMS8 ppc mpc8xx ivm 285 286KUP4K_config : unconfig 287 @./mkconfig $(@:_config=) ppc mpc8xx kup4k 288 289LANTEC_config : unconfig 290 @./mkconfig $(@:_config=) ppc mpc8xx lantec 291 292lwmon_config: unconfig 293 @./mkconfig $(@:_config=) ppc mpc8xx lwmon 294 295MBX_config \ 296MBX860T_config: unconfig 297 @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx 298 299MHPC_config: unconfig 300 @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec 301 302MVS1_config : unconfig 303 @./mkconfig $(@:_config=) ppc mpc8xx mvs1 304 305NETVIA_config: unconfig 306 @./mkconfig $(@:_config=) ppc mpc8xx netvia 307 308NX823_config: unconfig 309 @./mkconfig $(@:_config=) ppc mpc8xx nx823 310 311pcu_e_config: unconfig 312 @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens 313 314R360MPI_config: unconfig 315 @./mkconfig $(@:_config=) ppc mpc8xx r360mpi 316 317RBC823_config: unconfig 318 @./mkconfig $(@:_config=) ppc mpc8xx rbc823 319 320RPXClassic_config: unconfig 321 @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic 322 323RPXlite_config: unconfig 324 @./mkconfig $(@:_config=) ppc mpc8xx RPXlite 325 326rmu_config: unconfig 327 @./mkconfig $(@:_config=) ppc mpc8xx rmu 328 329RRvision_config: unconfig 330 @./mkconfig $(@:_config=) ppc mpc8xx RRvision 331 332RRvision_LCD_config: unconfig 333 @echo "#define CONFIG_LCD" >include/config.h 334 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h 335 @./mkconfig -a RRvision ppc mpc8xx RRvision 336 337SM850_config : unconfig 338 @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx 339 340SPD823TS_config: unconfig 341 @./mkconfig $(@:_config=) ppc mpc8xx spd8xx 342 343svm_sc8xx_config: unconfig 344 @ >include/config.h 345 @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx 346 347SXNI855T_config: unconfig 348 @./mkconfig $(@:_config=) ppc mpc8xx sixnet 349 350# EMK MPC8xx based modules 351TOP860_config: unconfig 352 @./mkconfig $(@:_config=) ppc mpc8xx top860 emk 353 354# Play some tricks for configuration selection 355# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock, 356# but only 855 and 860 boards may come with FEC 357# and 823 boards may have LCD support 358xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1))))) 359 360FPS850L_config \ 361FPS860L_config \ 362TQM823L_config \ 363TQM823L_66MHz_config \ 364TQM823L_80MHz_config \ 365TQM823L_LCD_config \ 366TQM823L_LCD_66MHz_config \ 367TQM823L_LCD_80MHz_config \ 368TQM850L_config \ 369TQM850L_66MHz_config \ 370TQM850L_80MHz_config \ 371TQM855L_config \ 372TQM855L_66MHz_config \ 373TQM855L_80MHz_config \ 374TQM860L_config \ 375TQM860L_66MHz_config \ 376TQM860L_80MHz_config \ 377TQM862L_config \ 378TQM862L_66MHz_config \ 379TQM862L_80MHz_config \ 380TQM862M_100MHz_config: unconfig 381 @ >include/config.h 382 @[ -z "$(findstring _66MHz,$@)" ] || \ 383 { echo "#define CONFIG_66MHz" >>include/config.h ; \ 384 echo "... with 66MHz system clock" ; \ 385 } 386 @[ -z "$(findstring _80MHz,$@)" ] || \ 387 { echo "#define CONFIG_80MHz" >>include/config.h ; \ 388 echo "... with 80MHz system clock" ; \ 389 } 390 @[ -z "$(findstring _100MHz,$@)" ] || \ 391 { echo "#define CONFIG_100MHz" >>include/config.h ; \ 392 echo "... with 100MHz system clock" ; \ 393 } 394 @[ -z "$(findstring _LCD,$@)" ] || \ 395 { echo "#define CONFIG_LCD" >>include/config.h ; \ 396 echo "#define CONFIG_NEC_NL6648BC20" >>include/config.h ; \ 397 echo "... with LCD display" ; \ 398 } 399 @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx 400 401TTTech_config: unconfig 402 @echo "#define CONFIG_LCD" >include/config.h 403 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h 404 @./mkconfig -a TQM823L ppc mpc8xx tqm8xx 405 406v37_config: unconfig 407 @echo "#define CONFIG_LCD" >include/config.h 408 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h 409 @./mkconfig $(@:_config=) ppc mpc8xx v37 410 411######################################################################### 412## PPC4xx Systems 413######################################################################### 414 415ADCIOP_config: unconfig 416 @./mkconfig $(@:_config=) ppc ppc4xx adciop esd 417 418AR405_config: unconfig 419 @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd 420 421ASH405_config: unconfig 422 @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd 423 424BUBINGA405EP_config:unconfig 425 @./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep 426 427CANBT_config: unconfig 428 @./mkconfig $(@:_config=) ppc ppc4xx canbt esd 429 430CPCI405_config \ 431CPCI4052_config \ 432CPCI405AB_config: unconfig 433 @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd 434 @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk 435 436CPCI440_config: unconfig 437 @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd 438 439CPCIISER4_config: unconfig 440 @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd 441 442CRAYL1_config:unconfig 443 @./mkconfig $(@:_config=) ppc ppc4xx L1 cray 444 445DASA_SIM_config: unconfig 446 @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd 447 448DU405_config: unconfig 449 @./mkconfig $(@:_config=) ppc ppc4xx du405 esd 450 451EBONY_config:unconfig 452 @./mkconfig $(@:_config=) ppc ppc4xx ebony 453 454ERIC_config:unconfig 455 @./mkconfig $(@:_config=) ppc ppc4xx eric 456 457MIP405_config:unconfig 458 @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl 459 460MIP405T_config:unconfig 461 @echo "#define CONFIG_MIP405T" >include/config.h 462 @echo "Enable subset config for MIP405T" 463 @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl 464 465ML2_config:unconfig 466 @./mkconfig $(@:_config=) ppc ppc4xx ml2 467 468OCRTC_config \ 469ORSG_config: unconfig 470 @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd 471 472PCI405_config: unconfig 473 @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd 474 475PIP405_config:unconfig 476 @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl 477 478PMC405_config: unconfig 479 @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd 480 481W7OLMC_config \ 482W7OLMG_config: unconfig 483 @./mkconfig $(@:_config=) ppc ppc4xx w7o 484 485WALNUT405_config:unconfig 486 @./mkconfig $(@:_config=) ppc ppc4xx walnut405 487 488######################################################################### 489## MPC824x Systems 490######################################################################### 491xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))) 492 493BMW_config: unconfig 494 @./mkconfig $(@:_config=) ppc mpc824x bmw 495 496CPC45_config \ 497CPC45_ROMBOOT_config: unconfig 498 @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 499 @cd ./include ; \ 500 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 501 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 502 echo "... booting from 8-bit flash" ; \ 503 else \ 504 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 505 echo "... booting from 64-bit flash" ; \ 506 fi; \ 507 echo "export CONFIG_BOOT_ROM" >> config.mk; 508 509CU824_config: unconfig 510 @./mkconfig $(@:_config=) ppc mpc824x cu824 511 512MOUSSE_config: unconfig 513 @./mkconfig $(@:_config=) ppc mpc824x mousse 514 515MUSENKI_config: unconfig 516 @./mkconfig $(@:_config=) ppc mpc824x musenki 517 518OXC_config: unconfig 519 @./mkconfig $(@:_config=) ppc mpc824x oxc 520 521PN62_config: unconfig 522 @./mkconfig $(@:_config=) ppc mpc824x pn62 523 524Sandpoint8240_config: unconfig 525 @./mkconfig $(@:_config=) ppc mpc824x sandpoint 526 527Sandpoint8245_config: unconfig 528 @./mkconfig $(@:_config=) ppc mpc824x sandpoint 529 530utx8245_config: unconfig 531 @./mkconfig $(@:_config=) ppc mpc824x utx8245 532 533######################################################################### 534## MPC8260 Systems 535######################################################################### 536 537cogent_mpc8260_config: unconfig 538 @./mkconfig $(@:_config=) ppc mpc8260 cogent 539 540CPU86_config \ 541CPU86_ROMBOOT_config: unconfig 542 @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 543 @cd ./include ; \ 544 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 545 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 546 echo "... booting from 8-bit flash" ; \ 547 else \ 548 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 549 echo "... booting from 64-bit flash" ; \ 550 fi; \ 551 echo "export CONFIG_BOOT_ROM" >> config.mk; 552 553ep8260_config: unconfig 554 @./mkconfig $(@:_config=) ppc mpc8260 ep8260 555 556gw8260_config: unconfig 557 @./mkconfig $(@:_config=) ppc mpc8260 gw8260 558 559hymod_config: unconfig 560 @./mkconfig $(@:_config=) ppc mpc8260 hymod 561 562IPHASE4539_config: unconfig 563 @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 564 565MPC8260ADS_config: unconfig 566 @./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads 567 568MPC8266ADS_config: unconfig 569 @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads 570 571PM825_config \ 572PM825_ROMBOOT_config: unconfig 573 @echo "#define CONFIG_PCI" >include/config.h 574 @./mkconfig -a PM826 ppc mpc8260 pm826 575 @cd ./include ; \ 576 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 577 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 578 echo "... booting from 8-bit flash" ; \ 579 else \ 580 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 581 echo "... booting from 64-bit flash" ; \ 582 fi; \ 583 echo "export CONFIG_BOOT_ROM" >> config.mk; \ 584 585PM826_config \ 586PM826_ROMBOOT_config: unconfig 587 @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826 588 @cd ./include ; \ 589 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 590 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 591 echo "... booting from 8-bit flash" ; \ 592 else \ 593 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 594 echo "... booting from 64-bit flash" ; \ 595 fi; \ 596 echo "export CONFIG_BOOT_ROM" >> config.mk; \ 597 598ppmc8260_config: unconfig 599 @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 600 601RPXsuper_config: unconfig 602 @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper 603 604rsdproto_config: unconfig 605 @./mkconfig $(@:_config=) ppc mpc8260 rsdproto 606 607sacsng_config: unconfig 608 @./mkconfig $(@:_config=) ppc mpc8260 sacsng 609 610sbc8260_config: unconfig 611 @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 612 613SCM_config: unconfig 614 @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens 615 616TQM8255_config \ 617TQM8260_config \ 618TQM8260_L2_config \ 619TQM8255_266MHz_config \ 620TQM8260_266MHz_config \ 621TQM8260_L2_266MHz_config \ 622TQM8255_300MHz_config \ 623TQM8260_300MHz_config: unconfig 624 @ >include/config.h 625 @if [ "$(findstring _L2_,$@)" ] ; then \ 626 echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ 627 echo "... with L2 Cache support (60x Bus Mode)" ; \ 628 else \ 629 echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ 630 echo "... without L2 Cache support" ; \ 631 fi 632 @[ -z "$(findstring _266MHz,$@)" ] || \ 633 { echo "#define CONFIG_266MHz" >>include/config.h ; \ 634 echo "... with 266MHz system clock" ; \ 635 } 636 @[ -z "$(findstring _300MHz,$@)" ] || \ 637 { echo "#define CONFIG_300MHz" >>include/config.h ; \ 638 echo "... with 300MHz system clock" ; \ 639 } 640 @[ -z "$(findstring TQM8255_,$@)" ] || \ 641 { echo "#define CONFIG_MPC8255" >>include/config.h ; } 642 @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 643 644atc_config: unconfig 645 @./mkconfig $(@:_config=) ppc mpc8260 atc 646 647######################################################################### 648## 74xx/7xx Systems 649######################################################################### 650 651AmigaOneG3SE_config: unconfig 652 @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 653 654EVB64260_config \ 655EVB64260_750CX_config: unconfig 656 @./mkconfig EVB64260 ppc 74xx_7xx evb64260 657 658ZUMA_config: unconfig 659 @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 660 661PCIPPC2_config \ 662PCIPPC6_config: unconfig 663 @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 664 665BAB7xx_config: unconfig 666 @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec 667 668ELPPC_config: unconfig 669 @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec 670 671#======================================================================== 672# ARM 673#======================================================================== 674######################################################################### 675## StrongARM Systems 676######################################################################### 677 678at91rm9200dk_config : unconfig 679 @./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk 680 681lart_config : unconfig 682 @./mkconfig $(@:_config=) arm sa1100 lart 683 684dnp1110_config : unconfig 685 @./mkconfig $(@:_config=) arm sa1100 dnp1110 686 687shannon_config : unconfig 688 @./mkconfig $(@:_config=) arm sa1100 shannon 689 690######################################################################### 691## ARM920T Systems 692######################################################################### 693 694xtract_trab = $(subst _big_flash,,$(subst _config,,$1)) 695 696smdk2400_config : unconfig 697 @./mkconfig $(@:_config=) arm arm920t smdk2400 698 699smdk2410_config : unconfig 700 @./mkconfig $(@:_config=) arm arm920t smdk2410 701 702trab_config \ 703trab_big_flash_config: unconfig 704 @ >include/config.h 705 @[ -z "$(findstring _big_flash,$@)" ] || \ 706 { echo "#define CONFIG_BIG_FLASH" >>include/config.h ; \ 707 echo "... with big flash support" ; \ 708 } 709 @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab 710 711VCMA9_config : unconfig 712 @./mkconfig $(@:_config=) arm arm920t vcma9 mpl 713 714######################################################################### 715## ARM720T Systems 716######################################################################### 717 718impa7_config : unconfig 719 @./mkconfig $(@:_config=) arm arm720t impa7 720 721ep7312_config : unconfig 722 @./mkconfig $(@:_config=) arm arm720t ep7312 723 724######################################################################### 725## XScale Systems 726######################################################################### 727 728cradle_config : unconfig 729 @./mkconfig $(@:_config=) arm pxa cradle 730 731csb226_config : unconfig 732 @./mkconfig $(@:_config=) arm pxa csb226 733 734innokom_config : unconfig 735 @./mkconfig $(@:_config=) arm pxa innokom 736 737lubbock_config : unconfig 738 @./mkconfig $(@:_config=) arm pxa lubbock 739 740wepep250_config : unconfig 741 @./mkconfig $(@:_config=) arm pxa wepep250 742 743#======================================================================== 744# i386 745#======================================================================== 746######################################################################### 747## AMD SC520 CDP 748######################################################################### 749sc520_cdp_config : unconfig 750 @./mkconfig $(@:_config=) i386 i386 sc520_cdp 751 752sc520_spunk_config : unconfig 753 @./mkconfig $(@:_config=) i386 i386 sc520_spunk 754 755sc520_spunk_rel_config : unconfig 756 @./mkconfig $(@:_config=) i386 i386 sc520_spunk 757 758#======================================================================== 759# MIPS 760#======================================================================== 761######################################################################### 762## MIPS32 4Kc 763######################################################################### 764 765incaip_config : unconfig 766 @./mkconfig $(@:_config=) mips mips incaip 767 768purple_config : unconfig 769 @./mkconfig $(@:_config=) mips mips purple 770 771######################################################################### 772######################################################################### 773 774clean: 775 find . -type f \ 776 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 777 -o -name '*.o' -o -name '*.a' \) -print \ 778 | xargs rm -f 779 rm -f examples/hello_world examples/timer \ 780 examples/eepro100_eeprom examples/sched \ 781 examples/mem_to_mem_idma2intr examples/82559_eeprom 782 783 rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr 784 rm -f tools/easylogo/easylogo tools/bmp_logo 785 rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend 786 rm -f tools/env/fw_printenv tools/env/fw_setenv 787 rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image 788 789clobber: clean 790 find . -type f \ 791 \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \ 792 -print \ 793 | xargs rm -f 794 rm -f $(OBJS) *.bak tags TAGS 795 rm -fr *.*~ 796 rm -f u-boot u-boot.bin u-boot.srec u-boot.map System.map 797 rm -f tools/crc32.c tools/environment.c tools/env/crc32.c 798 rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c 799 rm -f include/asm/arch include/asm 800 801mrproper \ 802distclean: clobber unconfig 803 804backup: 805 F=`basename $(TOPDIR)` ; cd .. ; \ 806 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 807 808######################################################################### 809