1# 2# (C) Copyright 2000-2008 3# Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4# 5# See file CREDITS for list of people who contributed to this 6# project. 7# 8# This program is free software; you can redistribute it and/or 9# modify it under the terms of the GNU General Public License as 10# published by the Free Software Foundatio; either version 2 of 11# the License, or (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program; if not, write to the Free Software 20# Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21# MA 02111-1307 USA 22# 23 24VERSION = 2008 25PATCHLEVEL = 10 26SUBLEVEL = 27EXTRAVERSION = -rc2 28ifneq "$(SUBLEVEL)" "" 29U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) 30else 31U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) 32endif 33VERSION_FILE = $(obj)include/version_autogenerated.h 34 35HOSTARCH := $(shell uname -m | \ 36 sed -e s/i.86/i386/ \ 37 -e s/sun4u/sparc64/ \ 38 -e s/arm.*/arm/ \ 39 -e s/sa110/arm/ \ 40 -e s/powerpc/ppc/ \ 41 -e s/ppc64/ppc/ \ 42 -e s/macppc/ppc/) 43 44HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 45 sed -e 's/\(cygwin\).*/cygwin/') 46 47export HOSTARCH HOSTOS 48 49# Deal with colliding definitions from tcsh etc. 50VENDOR= 51 52######################################################################### 53# Allow for silent builds 54ifeq (,$(findstring s,$(MAKEFLAGS))) 55XECHO = echo 56else 57XECHO = : 58endif 59 60######################################################################### 61# 62# U-boot build supports producing a object files to the separate external 63# directory. Two use cases are supported: 64# 65# 1) Add O= to the make command line 66# 'make O=/tmp/build all' 67# 68# 2) Set environement variable BUILD_DIR to point to the desired location 69# 'export BUILD_DIR=/tmp/build' 70# 'make' 71# 72# The second approach can also be used with a MAKEALL script 73# 'export BUILD_DIR=/tmp/build' 74# './MAKEALL' 75# 76# Command line 'O=' setting overrides BUILD_DIR environent variable. 77# 78# When none of the above methods is used the local build is performed and 79# the object files are placed in the source directory. 80# 81 82ifdef O 83ifeq ("$(origin O)", "command line") 84BUILD_DIR := $(O) 85endif 86endif 87 88ifneq ($(BUILD_DIR),) 89saved-output := $(BUILD_DIR) 90 91# Attempt to create a output directory. 92$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) 93 94# Verify if it was successful. 95BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) 96$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) 97endif # ifneq ($(BUILD_DIR),) 98 99OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) 100SRCTREE := $(CURDIR) 101TOPDIR := $(SRCTREE) 102LNDIR := $(OBJTREE) 103export TOPDIR SRCTREE OBJTREE 104 105MKCONFIG := $(SRCTREE)/mkconfig 106export MKCONFIG 107 108ifneq ($(OBJTREE),$(SRCTREE)) 109REMOTE_BUILD := 1 110export REMOTE_BUILD 111endif 112 113# $(obj) and (src) are defined in config.mk but here in main Makefile 114# we also need them before config.mk is included which is the case for 115# some targets like unconfig, clean, clobber, distclean, etc. 116ifneq ($(OBJTREE),$(SRCTREE)) 117obj := $(OBJTREE)/ 118src := $(SRCTREE)/ 119else 120obj := 121src := 122endif 123export obj src 124 125# Make sure CDPATH settings don't interfere 126unexport CDPATH 127 128######################################################################### 129 130ifeq ($(ARCH),powerpc) 131ARCH = ppc 132endif 133 134ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) 135 136# load ARCH, BOARD, and CPU configuration 137include $(obj)include/config.mk 138export ARCH CPU BOARD VENDOR SOC 139 140ifndef CROSS_COMPILE 141ifeq ($(HOSTARCH),$(ARCH)) 142CROSS_COMPILE = 143else 144ifeq ($(ARCH),ppc) 145CROSS_COMPILE = ppc_8xx- 146endif 147ifeq ($(ARCH),arm) 148CROSS_COMPILE = arm-linux- 149endif 150ifeq ($(ARCH),i386) 151CROSS_COMPILE = i386-linux- 152endif 153ifeq ($(ARCH),mips) 154CROSS_COMPILE = mips_4KC- 155endif 156ifeq ($(ARCH),nios) 157CROSS_COMPILE = nios-elf- 158endif 159ifeq ($(ARCH),nios2) 160CROSS_COMPILE = nios2-elf- 161endif 162ifeq ($(ARCH),m68k) 163CROSS_COMPILE = m68k-elf- 164endif 165ifeq ($(ARCH),microblaze) 166CROSS_COMPILE = mb- 167endif 168ifeq ($(ARCH),blackfin) 169CROSS_COMPILE = bfin-uclinux- 170endif 171ifeq ($(ARCH),avr32) 172CROSS_COMPILE = avr32-linux- 173endif 174ifeq ($(ARCH),sh) 175CROSS_COMPILE = sh4-linux- 176endif 177ifeq ($(ARCH),sparc) 178CROSS_COMPILE = sparc-elf- 179endif # sparc 180endif # HOSTARCH,ARCH 181endif # CROSS_COMPILE 182 183export CROSS_COMPILE 184 185# load other configuration 186include $(TOPDIR)/config.mk 187 188######################################################################### 189# U-Boot objects....order is important (i.e. start must be first) 190 191OBJS = cpu/$(CPU)/start.o 192ifeq ($(CPU),i386) 193OBJS += cpu/$(CPU)/start16.o 194OBJS += cpu/$(CPU)/reset.o 195endif 196ifeq ($(CPU),ppc4xx) 197OBJS += cpu/$(CPU)/resetvec.o 198endif 199ifeq ($(CPU),mpc85xx) 200OBJS += cpu/$(CPU)/resetvec.o 201endif 202 203OBJS := $(addprefix $(obj),$(OBJS)) 204 205LIBS = lib_generic/libgeneric.a 206LIBS += lib_generic/lzma/liblzma.a 207LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ 208 "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) 209LIBS += cpu/$(CPU)/lib$(CPU).a 210ifdef SOC 211LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a 212endif 213ifeq ($(CPU),ixp) 214LIBS += cpu/ixp/npe/libnpe.a 215endif 216LIBS += lib_$(ARCH)/lib$(ARCH).a 217LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ 218 fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a 219LIBS += net/libnet.a 220LIBS += disk/libdisk.a 221LIBS += drivers/bios_emulator/libatibiosemu.a 222LIBS += drivers/block/libblock.a 223LIBS += drivers/dma/libdma.a 224LIBS += drivers/hwmon/libhwmon.a 225LIBS += drivers/i2c/libi2c.a 226LIBS += drivers/input/libinput.a 227LIBS += drivers/misc/libmisc.a 228LIBS += drivers/mmc/libmmc.a 229LIBS += drivers/mtd/libmtd.a 230LIBS += drivers/mtd/nand/libnand.a 231LIBS += drivers/mtd/nand_legacy/libnand_legacy.a 232LIBS += drivers/mtd/onenand/libonenand.a 233LIBS += drivers/mtd/spi/libspi_flash.a 234LIBS += drivers/net/libnet.a 235LIBS += drivers/net/phy/libphy.a 236LIBS += drivers/net/sk98lin/libsk98lin.a 237LIBS += drivers/pci/libpci.a 238LIBS += drivers/pcmcia/libpcmcia.a 239LIBS += drivers/spi/libspi.a 240ifeq ($(CPU),mpc83xx) 241LIBS += drivers/qe/qe.a 242endif 243ifeq ($(CPU),mpc85xx) 244LIBS += drivers/qe/qe.a 245LIBS += cpu/mpc8xxx/ddr/libddr.a 246endif 247ifeq ($(CPU),mpc86xx) 248LIBS += cpu/mpc8xxx/ddr/libddr.a 249endif 250LIBS += drivers/rtc/librtc.a 251LIBS += drivers/serial/libserial.a 252LIBS += drivers/usb/libusb.a 253LIBS += drivers/video/libvideo.a 254LIBS += common/libcommon.a 255LIBS += libfdt/libfdt.a 256LIBS += api/libapi.a 257LIBS += post/libpost.a 258 259LIBS := $(addprefix $(obj),$(LIBS)) 260.PHONY : $(LIBS) $(VERSION_FILE) 261 262LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a 263LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) 264 265# Add GCC lib 266PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc 267 268# The "tools" are needed early, so put this first 269# Don't include stuff already done in $(LIBS) 270SUBDIRS = tools \ 271 examples \ 272 api_examples 273 274.PHONY : $(SUBDIRS) 275 276ifeq ($(CONFIG_NAND_U_BOOT),y) 277NAND_SPL = nand_spl 278U_BOOT_NAND = $(obj)u-boot-nand.bin 279endif 280 281ifeq ($(CONFIG_ONENAND_U_BOOT),y) 282ONENAND_IPL = onenand_ipl 283U_BOOT_ONENAND = $(obj)u-boot-onenand.bin 284endif 285 286__OBJS := $(subst $(obj),,$(OBJS)) 287__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) 288 289######################################################################### 290######################################################################### 291 292ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) 293ifeq ($(ARCH),blackfin) 294ALL += $(obj)u-boot.ldr 295endif 296 297all: $(ALL) 298 299$(obj)u-boot.hex: $(obj)u-boot 300 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ 301 302$(obj)u-boot.srec: $(obj)u-boot 303 $(OBJCOPY) -O srec $< $@ 304 305$(obj)u-boot.bin: $(obj)u-boot 306 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ 307 308$(obj)u-boot.ldr: $(obj)u-boot 309 $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS) 310 311$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr 312 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary 313 314$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr 315 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary 316 317$(obj)u-boot.img: $(obj)u-boot.bin 318 ./tools/mkimage -A $(ARCH) -T firmware -C none \ 319 -a $(TEXT_BASE) -e 0 \ 320 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ 321 sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ 322 -d $< $@ 323 324$(obj)u-boot.sha1: $(obj)u-boot.bin 325 $(obj)tools/ubsha1 $(obj)u-boot.bin 326 327$(obj)u-boot.dis: $(obj)u-boot 328 $(OBJDUMP) -d $< > $@ 329 330$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) 331 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ 332 sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ 333 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ 334 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ 335 -Map u-boot.map -o u-boot 336 337$(OBJS): depend $(obj)include/autoconf.mk 338 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@)) 339 340$(LIBS): depend $(obj)include/autoconf.mk 341 $(MAKE) -C $(dir $(subst $(obj),,$@)) 342 343$(LIBBOARD): depend $(LIBS) $(obj)include/autoconf.mk 344 $(MAKE) -C $(dir $(subst $(obj),,$@)) 345 346$(SUBDIRS): depend $(obj)include/autoconf.mk 347 $(MAKE) -C $@ all 348 349$(LDSCRIPT): depend $(obj)include/autoconf.mk 350 $(MAKE) -C $(dir $@) $(notdir $@) 351 352$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk 353 $(MAKE) -C nand_spl/board/$(BOARDDIR) all 354 355$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk 356 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin 357 358$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk 359 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all 360 361$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk 362 cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin 363 cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin 364 365$(VERSION_FILE): 366 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ 367 '$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion $(TOPDIR))' \ 368 ) > $@.tmp 369 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ 370 371gdbtools: 372 $(MAKE) -C tools/gdb all || exit 1 373 374updater: 375 $(MAKE) -C tools/updater all || exit 1 376 377env: 378 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 379 380depend dep: $(VERSION_FILE) 381 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done 382 383TAG_SUBDIRS += include 384TAG_SUBDIRS += lib_generic board/$(BOARDDIR) 385TAG_SUBDIRS += cpu/$(CPU) 386TAG_SUBDIRS += lib_$(ARCH) 387TAG_SUBDIRS += fs/cramfs 388TAG_SUBDIRS += fs/fat 389TAG_SUBDIRS += fs/fdos 390TAG_SUBDIRS += fs/jffs2 391TAG_SUBDIRS += fs/yaffs2 392TAG_SUBDIRS += net 393TAG_SUBDIRS += disk 394TAG_SUBDIRS += common 395TAG_SUBDIRS += drivers/bios_emulator 396TAG_SUBDIRS += drivers/block 397TAG_SUBDIRS += drivers/hwmon 398TAG_SUBDIRS += drivers/i2c 399TAG_SUBDIRS += drivers/input 400TAG_SUBDIRS += drivers/misc 401TAG_SUBDIRS += drivers/mmc 402TAG_SUBDIRS += drivers/mtd 403TAG_SUBDIRS += drivers/mtd/nand 404TAG_SUBDIRS += drivers/mtd/nand_legacy 405TAG_SUBDIRS += drivers/mtd/onenand 406TAG_SUBDIRS += drivers/mtd/spi 407TAG_SUBDIRS += drivers/net 408TAG_SUBDIRS += drivers/net/sk98lin 409TAG_SUBDIRS += drivers/pci 410TAG_SUBDIRS += drivers/pcmcia 411TAG_SUBDIRS += drivers/qe 412TAG_SUBDIRS += drivers/rtc 413TAG_SUBDIRS += drivers/serial 414TAG_SUBDIRS += drivers/spi 415TAG_SUBDIRS += drivers/usb 416TAG_SUBDIRS += drivers/video 417 418tags ctags: 419 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 420 -name '*.[ch]' -print` 421 422etags: 423 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \ 424 -name '*.[ch]' -print` 425cscope: 426 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \ 427 > cscope.files 428 cscope -b -q -k 429 430$(obj)System.map: $(obj)u-boot 431 @$(NM) $< | \ 432 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 433 sort > $(obj)System.map 434 435# 436# Auto-generate the autoconf.mk file (which is included by all makefiles) 437# 438# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. 439# the dep file is only include in this top level makefile to determine when 440# to regenerate the autoconf.mk file. 441$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h 442 @$(XECHO) Generating $@ ; \ 443 set -e ; \ 444 : Generate the dependancies ; \ 445 $(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \ 446 -MQ $(obj)include/autoconf.mk include/common.h > $@ 447 448$(obj)include/autoconf.mk: $(obj)include/config.h 449 @$(XECHO) Generating $@ ; \ 450 set -e ; \ 451 : Extract the config macros ; \ 452 $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ 453 sed -n -f tools/scripts/define2mk.sed > $@ 454 455sinclude $(obj)include/autoconf.mk.dep 456 457######################################################################### 458else # !config.mk 459all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ 460$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ 461$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \ 462dep tags ctags etags cscope $(obj)System.map: 463 @echo "System not configured - see README" >&2 464 @ exit 1 465endif # config.mk 466 467.PHONY : CHANGELOG 468CHANGELOG: 469 git log --no-merges U-Boot-1_1_5.. | \ 470 unexpand -a | sed -e 's/\s\s*$$//' > $@ 471 472include/license.h: tools/bin2header COPYING 473 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 474######################################################################### 475 476unconfig: 477 @rm -f $(obj)include/config.h $(obj)include/config.mk \ 478 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ 479 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep 480 481#======================================================================== 482# PowerPC 483#======================================================================== 484 485######################################################################### 486## MPC5xx Systems 487######################################################################### 488 489canmb_config: unconfig 490 @$(MKCONFIG) -a canmb ppc mpc5xxx canmb 491 492cmi_mpc5xx_config: unconfig 493 @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi 494 495PATI_config: unconfig 496 @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl 497 498######################################################################### 499## MPC5xxx Systems 500######################################################################### 501 502aev_config: unconfig 503 @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc 504 505BC3450_config: unconfig 506 @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450 507 508cm5200_config: unconfig 509 @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200 510 511cpci5200_config: unconfig 512 @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd 513 514hmi1001_config: unconfig 515 @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001 516 517Lite5200_config \ 518Lite5200_LOWBOOT_config \ 519Lite5200_LOWBOOT08_config \ 520icecube_5200_config \ 521icecube_5200_LOWBOOT_config \ 522icecube_5200_LOWBOOT08_config \ 523icecube_5200_DDR_config \ 524icecube_5200_DDR_LOWBOOT_config \ 525icecube_5200_DDR_LOWBOOT08_config \ 526icecube_5100_config: unconfig 527 @mkdir -p $(obj)include 528 @mkdir -p $(obj)board/icecube 529 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 530 { if [ "$(findstring DDR,$@)" ] ; \ 531 then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 532 else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 533 fi ; \ 534 $(XECHO) "... with LOWBOOT configuration" ; \ 535 } 536 @[ -z "$(findstring LOWBOOT08,$@)" ] || \ 537 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ 538 echo "... with 8 MB flash only" ; \ 539 $(XECHO) "... with LOWBOOT configuration" ; \ 540 } 541 @[ -z "$(findstring DDR,$@)" ] || \ 542 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 543 $(XECHO) "... DDR memory revision" ; \ 544 } 545 @[ -z "$(findstring 5200,$@)" ] || \ 546 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 547 $(XECHO) "... with MPC5200 processor" ; \ 548 } 549 @[ -z "$(findstring 5100,$@)" ] || \ 550 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 551 $(XECHO) "... with MGT5100 processor" ; \ 552 } 553 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 554 555jupiter_config: unconfig 556 @$(MKCONFIG) jupiter ppc mpc5xxx jupiter 557 558inka4x0_config: unconfig 559 @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 560 561lite5200b_config \ 562lite5200b_PM_config \ 563lite5200b_LOWBOOT_config: unconfig 564 @mkdir -p $(obj)include 565 @mkdir -p $(obj)board/icecube 566 @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h 567 @ $(XECHO) "... DDR memory revision" 568 @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h 569 @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h 570 @[ -z "$(findstring _PM_,$@)" ] || \ 571 { echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \ 572 $(XECHO) "... with power management (low-power mode) support" ; \ 573 } 574 @[ -z "$(findstring LOWBOOT_,$@)" ] || \ 575 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ 576 $(XECHO) "... with LOWBOOT configuration" ; \ 577 } 578 @ $(XECHO) "... with MPC5200B processor" 579 @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube 580 581mcc200_config \ 582mcc200_SDRAM_config \ 583mcc200_highboot_config \ 584mcc200_COM12_config \ 585mcc200_COM12_SDRAM_config \ 586mcc200_COM12_highboot_config \ 587mcc200_COM12_highboot_SDRAM_config \ 588mcc200_highboot_SDRAM_config \ 589prs200_config \ 590prs200_DDR_config \ 591prs200_highboot_config \ 592prs200_highboot_DDR_config: unconfig 593 @mkdir -p $(obj)include 594 @mkdir -p $(obj)board/mcc200 595 @[ -n "$(findstring highboot,$@)" ] || \ 596 { $(XECHO) "... with lowboot configuration" ; \ 597 } 598 @[ -z "$(findstring highboot,$@)" ] || \ 599 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \ 600 $(XECHO) "... with highboot configuration" ; \ 601 } 602 @[ -n "$(findstring _SDRAM,$@)" ] || \ 603 { if [ -n "$(findstring mcc200,$@)" ]; \ 604 then \ 605 $(XECHO) "... with DDR" ; \ 606 else \ 607 if [ -n "$(findstring _DDR,$@)" ];\ 608 then \ 609 $(XECHO) "... with DDR" ; \ 610 else \ 611 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ 612 $(XECHO) "... with SDRAM" ; \ 613 fi; \ 614 fi; \ 615 } 616 @[ -z "$(findstring _SDRAM,$@)" ] || \ 617 { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \ 618 $(XECHO) "... with SDRAM" ; \ 619 } 620 @[ -z "$(findstring COM12,$@)" ] || \ 621 { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \ 622 $(XECHO) "... with console on COM12" ; \ 623 } 624 @[ -z "$(findstring prs200,$@)" ] || \ 625 { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\ 626 } 627 @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200 628 629mecp5200_config: unconfig 630 @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd 631 632motionpro_config: unconfig 633 @$(MKCONFIG) motionpro ppc mpc5xxx motionpro 634 635mucmc52_config: unconfig 636 @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52 637 638munices_config: unconfig 639 @$(MKCONFIG) munices ppc mpc5xxx munices 640 641MVBC_P_config: unconfig 642 @mkdir -p $(obj)include 643 @mkdir -p $(obj)board/mvbc_p 644 @ >$(obj)include/config.h 645 @[ -z "$(findstring MVBC_P,$@)" ] || \ 646 { echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h; } 647 @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision 648 649o2dnt_config: unconfig 650 @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt 651 652pf5200_config: unconfig 653 @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd 654 655PM520_config \ 656PM520_DDR_config \ 657PM520_ROMBOOT_config \ 658PM520_ROMBOOT_DDR_config: unconfig 659 @mkdir -p $(obj)include 660 @[ -z "$(findstring DDR,$@)" ] || \ 661 { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \ 662 $(XECHO) "... DDR memory revision" ; \ 663 } 664 @[ -z "$(findstring ROMBOOT,$@)" ] || \ 665 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 666 $(XECHO) "... booting from 8-bit flash" ; \ 667 } 668 @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520 669 670smmaco4_config: unconfig 671 @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc 672 673spieval_config: unconfig 674 @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc 675 676TB5200_B_config \ 677TB5200_config: unconfig 678 @mkdir -p $(obj)include 679 @[ -z "$(findstring _B,$@)" ] || \ 680 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 681 $(XECHO) "... with MPC5200B processor" ; \ 682 } 683 @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc 684 685MINI5200_config \ 686EVAL5200_config \ 687TOP5200_config: unconfig 688 @mkdir -p $(obj)include 689 @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h 690 @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk 691 692Total5100_config \ 693Total5200_config \ 694Total5200_lowboot_config \ 695Total5200_Rev2_config \ 696Total5200_Rev2_lowboot_config: unconfig 697 @mkdir -p $(obj)include 698 @mkdir -p $(obj)board/total5200 699 @[ -z "$(findstring 5100,$@)" ] || \ 700 { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \ 701 $(XECHO) "... with MGT5100 processor" ; \ 702 } 703 @[ -z "$(findstring 5200,$@)" ] || \ 704 { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \ 705 $(XECHO) "... with MPC5200 processor" ; \ 706 } 707 @[ -n "$(findstring Rev,$@)" ] || \ 708 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \ 709 $(XECHO) "... revision 1 board" ; \ 710 } 711 @[ -z "$(findstring Rev2_,$@)" ] || \ 712 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \ 713 $(XECHO) "... revision 2 board" ; \ 714 } 715 @[ -z "$(findstring lowboot_,$@)" ] || \ 716 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \ 717 $(XECHO) "... with lowboot configuration" ; \ 718 } 719 @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 720 721cam5200_config \ 722cam5200_niosflash_config \ 723fo300_config \ 724MiniFAP_config \ 725TQM5200S_config \ 726TQM5200S_HIGHBOOT_config \ 727TQM5200_B_config \ 728TQM5200_B_HIGHBOOT_config \ 729TQM5200_config \ 730TQM5200_STK100_config: unconfig 731 @mkdir -p $(obj)include 732 @mkdir -p $(obj)board/tqc/tqm5200 733 @[ -z "$(findstring cam5200,$@)" ] || \ 734 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ 735 echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 736 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 737 $(XECHO) "... TQM5200S on Cam5200" ; \ 738 } 739 @[ -z "$(findstring niosflash,$@)" ] || \ 740 { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ 741 $(XECHO) "... with NIOS flash driver" ; \ 742 } 743 @[ -z "$(findstring fo300,$@)" ] || \ 744 { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ 745 $(XECHO) "... TQM5200 on FO300" ; \ 746 } 747 @[ -z "$(findstring MiniFAP,$@)" ] || \ 748 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \ 749 $(XECHO) "... TQM5200_AC on MiniFAP" ; \ 750 } 751 @[ -z "$(findstring STK100,$@)" ] || \ 752 { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \ 753 $(XECHO) "... on a STK52XX.100 base board" ; \ 754 } 755 @[ -z "$(findstring TQM5200_B,$@)" ] || \ 756 { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 757 } 758 @[ -z "$(findstring TQM5200S,$@)" ] || \ 759 { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ 760 echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ 761 } 762 @[ -z "$(findstring HIGHBOOT,$@)" ] || \ 763 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ 764 } 765 @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc 766 767uc101_config: unconfig 768 @$(MKCONFIG) uc101 ppc mpc5xxx uc101 769 770v38b_config: unconfig 771 @$(MKCONFIG) -a v38b ppc mpc5xxx v38b 772 773######################################################################### 774## MPC512x Systems 775######################################################################### 776 777ads5121_config \ 778ads5121_rev2_config \ 779 : unconfig 780 @mkdir -p $(obj)include 781 @if [ "$(findstring rev2,$@)" ] ; then \ 782 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ 783 fi 784 @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121 785 786 787######################################################################### 788## MPC8xx Systems 789######################################################################### 790 791Adder_config \ 792Adder87x_config \ 793AdderII_config \ 794 : unconfig 795 @mkdir -p $(obj)include 796 $(if $(findstring AdderII,$@), \ 797 @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) 798 @$(MKCONFIG) -a Adder ppc mpc8xx adder 799 800AdderUSB_config: unconfig 801 @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder 802 803ADS860_config \ 804FADS823_config \ 805FADS850SAR_config \ 806MPC86xADS_config \ 807MPC885ADS_config \ 808FADS860T_config: unconfig 809 @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads 810 811AMX860_config : unconfig 812 @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel 813 814c2mon_config: unconfig 815 @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon 816 817CCM_config: unconfig 818 @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens 819 820cogent_mpc8xx_config: unconfig 821 @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent 822 823ELPT860_config: unconfig 824 @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX 825 826EP88x_config: unconfig 827 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x 828 829ESTEEM192E_config: unconfig 830 @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e 831 832ETX094_config : unconfig 833 @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094 834 835FLAGADM_config: unconfig 836 @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm 837 838xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) 839 840GEN860T_SC_config \ 841GEN860T_config: unconfig 842 @mkdir -p $(obj)include 843 @[ -z "$(findstring _SC,$@)" ] || \ 844 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \ 845 $(XECHO) "With reduced H/W feature set (SC)..." ; \ 846 } 847 @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t 848 849GENIETV_config: unconfig 850 @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv 851 852GTH_config: unconfig 853 @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth 854 855hermes_config : unconfig 856 @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes 857 858HMI10_config : unconfig 859 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 860 861IAD210_config: unconfig 862 @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens 863 864xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) 865 866ICU862_100MHz_config \ 867ICU862_config: unconfig 868 @mkdir -p $(obj)include 869 @[ -z "$(findstring _100MHz,$@)" ] || \ 870 { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \ 871 $(XECHO) "... with 100MHz system clock" ; \ 872 } 873 @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 874 875IP860_config : unconfig 876 @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860 877 878IVML24_256_config \ 879IVML24_128_config \ 880IVML24_config: unconfig 881 @mkdir -p $(obj)include 882 @[ -z "$(findstring IVML24_config,$@)" ] || \ 883 { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \ 884 } 885 @[ -z "$(findstring IVML24_128_config,$@)" ] || \ 886 { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \ 887 } 888 @[ -z "$(findstring IVML24_256_config,$@)" ] || \ 889 { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \ 890 } 891 @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm 892 893IVMS8_256_config \ 894IVMS8_128_config \ 895IVMS8_config: unconfig 896 @mkdir -p $(obj)include 897 @[ -z "$(findstring IVMS8_config,$@)" ] || \ 898 { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \ 899 } 900 @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ 901 { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \ 902 } 903 @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ 904 { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \ 905 } 906 @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm 907 908KUP4K_config : unconfig 909 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup 910 911KUP4X_config : unconfig 912 @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup 913 914LANTEC_config : unconfig 915 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec 916 917lwmon_config: unconfig 918 @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon 919 920MBX_config \ 921MBX860T_config: unconfig 922 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx 923 924mgsuvd_config: unconfig 925 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile 926 927MHPC_config: unconfig 928 @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec 929 930xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) 931 932NETVIA_V2_config \ 933NETVIA_config: unconfig 934 @mkdir -p $(obj)include 935 @[ -z "$(findstring NETVIA_config,$@)" ] || \ 936 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \ 937 $(XECHO) "... Version 1" ; \ 938 } 939 @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ 940 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \ 941 $(XECHO) "... Version 2" ; \ 942 } 943 @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia 944 945xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) 946 947NETPHONE_V2_config \ 948NETPHONE_config: unconfig 949 @mkdir -p $(obj)include 950 @[ -z "$(findstring NETPHONE_config,$@)" ] || \ 951 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \ 952 } 953 @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ 954 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \ 955 } 956 @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone 957 958xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) 959 960NETTA_ISDN_6412_SWAPHOOK_config \ 961NETTA_ISDN_SWAPHOOK_config \ 962NETTA_6412_SWAPHOOK_config \ 963NETTA_SWAPHOOK_config \ 964NETTA_ISDN_6412_config \ 965NETTA_ISDN_config \ 966NETTA_6412_config \ 967NETTA_config: unconfig 968 @mkdir -p $(obj)include 969 @[ -z "$(findstring ISDN_,$@)" ] || \ 970 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \ 971 } 972 @[ -n "$(findstring ISDN_,$@)" ] || \ 973 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \ 974 } 975 @[ -z "$(findstring 6412_,$@)" ] || \ 976 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \ 977 } 978 @[ -n "$(findstring 6412_,$@)" ] || \ 979 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \ 980 } 981 @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ 982 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \ 983 } 984 @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ 985 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \ 986 } 987 @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta 988 989xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) 990 991NETTA2_V2_config \ 992NETTA2_config: unconfig 993 @mkdir -p $(obj)include 994 @[ -z "$(findstring NETTA2_config,$@)" ] || \ 995 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \ 996 } 997 @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ 998 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \ 999 } 1000 @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 1001 1002NC650_Rev1_config \ 1003NC650_Rev2_config \ 1004CP850_config: unconfig 1005 @mkdir -p $(obj)include 1006 @[ -z "$(findstring CP850,$@)" ] || \ 1007 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ 1008 echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1009 } 1010 @[ -z "$(findstring Rev1,$@)" ] || \ 1011 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ 1012 } 1013 @[ -z "$(findstring Rev2,$@)" ] || \ 1014 { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ 1015 } 1016 @$(MKCONFIG) -a NC650 ppc mpc8xx nc650 1017 1018NX823_config: unconfig 1019 @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823 1020 1021pcu_e_config: unconfig 1022 @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens 1023 1024QS850_config: unconfig 1025 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1026 1027QS823_config: unconfig 1028 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc 1029 1030QS860T_config: unconfig 1031 @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc 1032 1033quantum_config: unconfig 1034 @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum 1035 1036R360MPI_config: unconfig 1037 @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi 1038 1039RBC823_config: unconfig 1040 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823 1041 1042RPXClassic_config: unconfig 1043 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic 1044 1045RPXlite_config: unconfig 1046 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite 1047 1048RPXlite_DW_64_config \ 1049RPXlite_DW_LCD_config \ 1050RPXlite_DW_64_LCD_config \ 1051RPXlite_DW_NVRAM_config \ 1052RPXlite_DW_NVRAM_64_config \ 1053RPXlite_DW_NVRAM_LCD_config \ 1054RPXlite_DW_NVRAM_64_LCD_config \ 1055RPXlite_DW_config: unconfig 1056 @mkdir -p $(obj)include 1057 @[ -z "$(findstring _64,$@)" ] || \ 1058 { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \ 1059 $(XECHO) "... with 64MHz system clock ..."; \ 1060 } 1061 @[ -z "$(findstring _LCD,$@)" ] || \ 1062 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1063 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1064 $(XECHO) "... with LCD display ..."; \ 1065 } 1066 @[ -z "$(findstring _NVRAM,$@)" ] || \ 1067 { echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \ 1068 $(XECHO) "... with ENV in NVRAM ..."; \ 1069 } 1070 @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw 1071 1072rmu_config: unconfig 1073 @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu 1074 1075RRvision_config: unconfig 1076 @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision 1077 1078RRvision_LCD_config: unconfig 1079 @mkdir -p $(obj)include 1080 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1081 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1082 @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision 1083 1084SM850_config : unconfig 1085 @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc 1086 1087spc1920_config: unconfig 1088 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920 1089 1090SPD823TS_config: unconfig 1091 @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx 1092 1093stxxtc_config: unconfig 1094 @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc 1095 1096svm_sc8xx_config: unconfig 1097 @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx 1098 1099SXNI855T_config: unconfig 1100 @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet 1101 1102# EMK MPC8xx based modules 1103TOP860_config: unconfig 1104 @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk 1105 1106# Play some tricks for configuration selection 1107# Only 855 and 860 boards may come with FEC 1108# and only 823 boards may have LCD support 1109xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) 1110 1111FPS850L_config \ 1112FPS860L_config \ 1113NSCU_config \ 1114TQM823L_config \ 1115TQM823L_LCD_config \ 1116TQM850L_config \ 1117TQM855L_config \ 1118TQM860L_config \ 1119TQM862L_config \ 1120TQM823M_config \ 1121TQM850M_config \ 1122TQM855M_config \ 1123TQM860M_config \ 1124TQM862M_config \ 1125TQM866M_config \ 1126TQM885D_config \ 1127TK885D_config \ 1128virtlab2_config: unconfig 1129 @mkdir -p $(obj)include 1130 @[ -z "$(findstring _LCD,$@)" ] || \ 1131 { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ 1132 echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ 1133 $(XECHO) "... with LCD display" ; \ 1134 } 1135 @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc 1136 1137TTTech_config: unconfig 1138 @mkdir -p $(obj)include 1139 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1140 @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h 1141 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1142 1143uc100_config : unconfig 1144 @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100 1145 1146v37_config: unconfig 1147 @mkdir -p $(obj)include 1148 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1149 @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h 1150 @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37 1151 1152wtk_config: unconfig 1153 @mkdir -p $(obj)include 1154 @echo "#define CONFIG_LCD" >$(obj)include/config.h 1155 @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h 1156 @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc 1157 1158######################################################################### 1159## PPC4xx Systems 1160######################################################################### 1161xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) 1162 1163acadia_config: unconfig 1164 @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc 1165 1166acadia_nand_config: unconfig 1167 @mkdir -p $(obj)include $(obj)board/amcc/acadia 1168 @mkdir -p $(obj)nand_spl/board/amcc/acadia 1169 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1170 @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc 1171 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp 1172 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1173 1174ADCIOP_config: unconfig 1175 @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd 1176 1177alpr_config: unconfig 1178 @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive 1179 1180AP1000_config:unconfig 1181 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix 1182 1183APC405_config: unconfig 1184 @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd 1185 1186AR405_config: unconfig 1187 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd 1188 1189ASH405_config: unconfig 1190 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd 1191 1192bamboo_config: unconfig 1193 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc 1194 1195bamboo_nand_config: unconfig 1196 @mkdir -p $(obj)include $(obj)board/amcc/bamboo 1197 @mkdir -p $(obj)nand_spl/board/amcc/bamboo 1198 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1199 @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc 1200 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp 1201 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1202 1203bubinga_config: unconfig 1204 @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc 1205 1206CANBT_config: unconfig 1207 @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd 1208 1209# Canyonlands & Glacier use different U-Boot images 1210canyonlands_config \ 1211glacier_config: unconfig 1212 @mkdir -p $(obj)include 1213 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1214 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1215 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1216 1217canyonlands_nand_config \ 1218glacier_nand_config: unconfig 1219 @mkdir -p $(obj)include $(obj)board/amcc/canyonlands 1220 @mkdir -p $(obj)nand_spl/board/amcc/canyonlands 1221 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1222 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ 1223 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1224 @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc 1225 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp 1226 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1227 1228CATcenter_config \ 1229CATcenter_25_config \ 1230CATcenter_33_config: unconfig 1231 @mkdir -p $(obj)include 1232 @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h 1233 @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h 1234 @[ -z "$(findstring _25,$@)" ] || \ 1235 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \ 1236 $(XECHO) "SysClk = 25MHz" ; \ 1237 } 1238 @[ -z "$(findstring _33,$@)" ] || \ 1239 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \ 1240 $(XECHO) "SysClk = 33MHz" ; \ 1241 } 1242 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1243 1244CMS700_config: unconfig 1245 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd 1246 1247CPCI2DP_config: unconfig 1248 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd 1249 1250CPCI405_config: unconfig 1251 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1252 1253CPCI4052_config \ 1254CPCI405DT_config \ 1255CPCI405AB_config: unconfig 1256 @mkdir -p $(obj)board/esd/cpci405 1257 @echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp 1258 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd 1259 1260CPCIISER4_config: unconfig 1261 @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd 1262 1263CRAYL1_config: unconfig 1264 @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray 1265 1266csb272_config: unconfig 1267 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272 1268 1269csb472_config: unconfig 1270 @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472 1271 1272DASA_SIM_config: unconfig 1273 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd 1274 1275DP405_config: unconfig 1276 @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd 1277 1278DU405_config: unconfig 1279 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd 1280 1281DU440_config: unconfig 1282 @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd 1283 1284ebony_config: unconfig 1285 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc 1286 1287ERIC_config: unconfig 1288 @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric 1289 1290EXBITGEN_config: unconfig 1291 @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen 1292 1293G2000_config: unconfig 1294 @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000 1295 1296hcu4_config: unconfig 1297 @mkdir -p $(obj)board/netstal/common 1298 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal 1299 1300hcu5_config: unconfig 1301 @mkdir -p $(obj)board/netstal/common 1302 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal 1303 1304HH405_config: unconfig 1305 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd 1306 1307HUB405_config: unconfig 1308 @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd 1309 1310JSE_config: unconfig 1311 @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse 1312 1313KAREF_config: unconfig 1314 @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst 1315 1316katmai_config: unconfig 1317 @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc 1318 1319# Kilauea & Haleakala images are identical (recognized via PVR) 1320kilauea_config \ 1321haleakala_config: unconfig 1322 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1323 1324kilauea_nand_config \ 1325haleakala_nand_config: unconfig 1326 @mkdir -p $(obj)include $(obj)board/amcc/kilauea 1327 @mkdir -p $(obj)nand_spl/board/amcc/kilauea 1328 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1329 @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc 1330 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp 1331 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1332 1333korat_config: unconfig 1334 @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat 1335 1336luan_config: unconfig 1337 @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc 1338 1339lwmon5_config: unconfig 1340 @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5 1341 1342makalu_config: unconfig 1343 @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc 1344 1345mcu25_config: unconfig 1346 @mkdir -p $(obj)board/netstal/common 1347 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal 1348 1349METROBOX_config: unconfig 1350 @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst 1351 1352MIP405_config: unconfig 1353 @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl 1354 1355MIP405T_config: unconfig 1356 @mkdir -p $(obj)include 1357 @echo "#define CONFIG_MIP405T" >$(obj)include/config.h 1358 @$(XECHO) "Enable subset config for MIP405T" 1359 @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl 1360 1361ML2_config: unconfig 1362 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2 1363 1364ml300_config: unconfig 1365 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx 1366 1367ml507_flash_config: unconfig 1368 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1369 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1370 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1371 > $(obj)board/xilinx/ml507/config.tmp 1372 @echo "TEXT_BASE := 0xFE360000" \ 1373 >> $(obj)board/xilinx/ml507/config.tmp 1374 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1375 1376ml507_config: unconfig 1377 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1378 @mkdir -p $(obj)include $(obj)board/xilinx/ml507 1379 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1380 > $(obj)board/xilinx/ml507/config.tmp 1381 @echo "TEXT_BASE := 0x04000000" \ 1382 >> $(obj)board/xilinx/ml507/config.tmp 1383 @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx 1384 1385ocotea_config: unconfig 1386 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc 1387 1388OCRTC_config \ 1389ORSG_config: unconfig 1390 @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd 1391 1392p3p440_config: unconfig 1393 @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive 1394 1395PCI405_config: unconfig 1396 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd 1397 1398pcs440ep_config: unconfig 1399 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep 1400 1401PIP405_config: unconfig 1402 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl 1403 1404PLU405_config: unconfig 1405 @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd 1406 1407PMC405_config: unconfig 1408 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd 1409 1410PMC440_config: unconfig 1411 @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd 1412 1413PPChameleonEVB_config \ 1414PPChameleonEVB_BA_25_config \ 1415PPChameleonEVB_ME_25_config \ 1416PPChameleonEVB_HI_25_config \ 1417PPChameleonEVB_BA_33_config \ 1418PPChameleonEVB_ME_33_config \ 1419PPChameleonEVB_HI_33_config: unconfig 1420 @mkdir -p $(obj)include 1421 @[ -z "$(findstring EVB_BA,$@)" ] || \ 1422 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \ 1423 $(XECHO) "... BASIC model" ; \ 1424 } 1425 @[ -z "$(findstring EVB_ME,$@)" ] || \ 1426 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \ 1427 $(XECHO) "... MEDIUM model" ; \ 1428 } 1429 @[ -z "$(findstring EVB_HI,$@)" ] || \ 1430 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \ 1431 $(XECHO) "... HIGH-END model" ; \ 1432 } 1433 @[ -z "$(findstring _25,$@)" ] || \ 1434 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \ 1435 $(XECHO) "SysClk = 25MHz" ; \ 1436 } 1437 @[ -z "$(findstring _33,$@)" ] || \ 1438 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \ 1439 $(XECHO) "SysClk = 33MHz" ; \ 1440 } 1441 @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave 1442 1443quad100hd_config: unconfig 1444 @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd 1445 1446redwood_config: unconfig 1447 @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc 1448 1449sbc405_config: unconfig 1450 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405 1451 1452sc3_config:unconfig 1453 @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3 1454 1455sequoia_config \ 1456rainier_config: unconfig 1457 @mkdir -p $(obj)include 1458 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1459 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1460 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1461 1462sequoia_nand_config \ 1463rainier_nand_config: unconfig 1464 @mkdir -p $(obj)include $(obj)board/amcc/sequoia 1465 @mkdir -p $(obj)nand_spl/board/amcc/sequoia 1466 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 1467 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1468 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h 1469 @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc 1470 @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp 1471 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 1472 1473taihu_config: unconfig 1474 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc 1475 1476taishan_config: unconfig 1477 @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc 1478 1479v5fx30teval_config: unconfig 1480 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1481 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1482 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1483 > $(obj)board/avnet/v5fx30teval/config.tmp 1484 @echo "TEXT_BASE := 0x03000000" \ 1485 >> $(obj)board/avnet/v5fx30teval/config.tmp 1486 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1487 1488v5fx30teval_flash_config: unconfig 1489 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1490 @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval 1491 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1492 > $(obj)board/avnet/v5fx30teval/config.tmp 1493 @echo "TEXT_BASE := 0xFF1C0000" \ 1494 >> $(obj)board/avnet/v5fx30teval/config.tmp 1495 @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet 1496 1497VOH405_config: unconfig 1498 @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd 1499 1500VOM405_config: unconfig 1501 @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd 1502 1503W7OLMC_config \ 1504W7OLMG_config: unconfig 1505 @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o 1506 1507# Walnut & Sycamore images are identical (recognized via PVR) 1508walnut_config \ 1509sycamore_config: unconfig 1510 @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc 1511 1512WUH405_config: unconfig 1513 @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd 1514 1515xilinx-ppc440-generic_flash_config: unconfig 1516 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1517 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ 1518 > $(obj)board/xilinx/ppc440-generic/config.tmp 1519 @echo "TEXT_BASE := 0xFE360000" \ 1520 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1521 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1522 1523xilinx-ppc440-generic_config: unconfig 1524 @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic 1525 @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ 1526 > $(obj)board/xilinx/ppc440-generic/config.tmp 1527 @echo "TEXT_BASE := 0x04000000" \ 1528 >> $(obj)board/xilinx/ppc440-generic/config.tmp 1529 @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx 1530 1531XPEDITE1K_config: unconfig 1532 @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k 1533 1534yosemite_config \ 1535yellowstone_config: unconfig 1536 @mkdir -p $(obj)include 1537 @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ 1538 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h 1539 @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc 1540 1541yucca_config: unconfig 1542 @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc 1543 1544zeus_config: unconfig 1545 @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus 1546 1547######################################################################### 1548## MPC8220 Systems 1549######################################################################### 1550 1551Alaska8220_config \ 1552Yukon8220_config: unconfig 1553 @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska 1554 1555sorcery_config: unconfig 1556 @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery 1557 1558######################################################################### 1559## MPC824x Systems 1560######################################################################### 1561xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) 1562 1563A3000_config: unconfig 1564 @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000 1565 1566barco_config: unconfig 1567 @$(MKCONFIG) $(@:_config=) ppc mpc824x barco 1568 1569BMW_config: unconfig 1570 @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw 1571 1572CPC45_config \ 1573CPC45_ROMBOOT_config: unconfig 1574 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45 1575 @cd $(obj)include ; \ 1576 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1577 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1578 $(XECHO) "... booting from 8-bit flash" ; \ 1579 else \ 1580 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1581 $(XECHO) "... booting from 64-bit flash" ; \ 1582 fi; \ 1583 echo "export CONFIG_BOOT_ROM" >> config.mk; 1584 1585CU824_config: unconfig 1586 @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824 1587 1588debris_config: unconfig 1589 @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin 1590 1591eXalion_config: unconfig 1592 @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion 1593 1594HIDDEN_DRAGON_config: unconfig 1595 @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon 1596 1597kvme080_config: unconfig 1598 @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin 1599 1600# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as 1601# time permits. 1602#linkstation_HDLAN_config \ 1603# Remove this line when HDLAN is fixed 1604linkstation_HGLAN_config: unconfig 1605 @mkdir -p $(obj)include 1606 @case $@ in \ 1607 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ 1608 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ 1609 esac 1610 @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation 1611 1612MOUSSE_config: unconfig 1613 @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse 1614 1615MUSENKI_config: unconfig 1616 @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki 1617 1618MVBLUE_config: unconfig 1619 @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue 1620 1621OXC_config: unconfig 1622 @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc 1623 1624PN62_config: unconfig 1625 @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62 1626 1627Sandpoint8240_config: unconfig 1628 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1629 1630Sandpoint8245_config: unconfig 1631 @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint 1632 1633sbc8240_config: unconfig 1634 @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240 1635 1636SL8245_config: unconfig 1637 @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245 1638 1639utx8245_config: unconfig 1640 @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245 1641 1642######################################################################### 1643## MPC8260 Systems 1644######################################################################### 1645 1646atc_config: unconfig 1647 @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc 1648 1649cogent_mpc8260_config: unconfig 1650 @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent 1651 1652CPU86_config \ 1653CPU86_ROMBOOT_config: unconfig 1654 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86 1655 @cd $(obj)include ; \ 1656 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1657 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1658 $(XECHO) "... booting from 8-bit flash" ; \ 1659 else \ 1660 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1661 $(XECHO) "... booting from 64-bit flash" ; \ 1662 fi; \ 1663 echo "export CONFIG_BOOT_ROM" >> config.mk; 1664 1665CPU87_config \ 1666CPU87_ROMBOOT_config: unconfig 1667 @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87 1668 @cd $(obj)include ; \ 1669 if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1670 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ 1671 $(XECHO) "... booting from 8-bit flash" ; \ 1672 else \ 1673 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ 1674 $(XECHO) "... booting from 64-bit flash" ; \ 1675 fi; \ 1676 echo "export CONFIG_BOOT_ROM" >> config.mk; 1677 1678ep8248_config \ 1679ep8248E_config : unconfig 1680 @$(MKCONFIG) ep8248 ppc mpc8260 ep8248 1681 1682ep8260_config: unconfig 1683 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260 1684 1685ep82xxm_config: unconfig 1686 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm 1687 1688gw8260_config: unconfig 1689 @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260 1690 1691hymod_config: unconfig 1692 @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod 1693 1694IDS8247_config: unconfig 1695 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247 1696 1697IPHASE4539_config: unconfig 1698 @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539 1699 1700ISPAN_config \ 1701ISPAN_REVB_config: unconfig 1702 @mkdir -p $(obj)include 1703 @if [ "$(findstring _REVB_,$@)" ] ; then \ 1704 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ 1705 fi 1706 @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan 1707 1708mgcoge_config : unconfig 1709 @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile 1710 1711MPC8260ADS_config \ 1712MPC8260ADS_lowboot_config \ 1713MPC8260ADS_33MHz_config \ 1714MPC8260ADS_33MHz_lowboot_config \ 1715MPC8260ADS_40MHz_config \ 1716MPC8260ADS_40MHz_lowboot_config \ 1717MPC8272ADS_config \ 1718MPC8272ADS_lowboot_config \ 1719PQ2FADS_config \ 1720PQ2FADS_lowboot_config \ 1721PQ2FADS-VR_config \ 1722PQ2FADS-VR_lowboot_config \ 1723PQ2FADS-ZU_config \ 1724PQ2FADS-ZU_lowboot_config \ 1725PQ2FADS-ZU_66MHz_config \ 1726PQ2FADS-ZU_66MHz_lowboot_config \ 1727 : unconfig 1728 @mkdir -p $(obj)include 1729 @mkdir -p $(obj)board/freescale/mpc8260ads 1730 $(if $(findstring PQ2FADS,$@), \ 1731 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ 1732 @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) 1733 $(if $(findstring MHz,$@), \ 1734 @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ 1735 $(if $(findstring VR,$@), \ 1736 @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) 1737 @[ -z "$(findstring lowboot_,$@)" ] || \ 1738 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \ 1739 $(XECHO) "... with lowboot configuration" ; \ 1740 } 1741 @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale 1742 1743MPC8266ADS_config: unconfig 1744 @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale 1745 1746muas3001_dev_config \ 1747muas3001_config : unconfig 1748 @mkdir -p $(obj)include 1749 @mkdir -p $(obj)board/muas3001 1750 @if [ "$(findstring dev,$@)" ] ; then \ 1751 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ 1752 fi 1753 @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001 1754 1755# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash 1756PM825_config \ 1757PM825_ROMBOOT_config \ 1758PM825_BIGFLASH_config \ 1759PM825_ROMBOOT_BIGFLASH_config \ 1760PM826_config \ 1761PM826_ROMBOOT_config \ 1762PM826_BIGFLASH_config \ 1763PM826_ROMBOOT_BIGFLASH_config: unconfig 1764 @mkdir -p $(obj)include 1765 @mkdir -p $(obj)board/pm826 1766 @if [ "$(findstring PM825_,$@)" ] ; then \ 1767 echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ 1768 else \ 1769 >$(obj)include/config.h ; \ 1770 fi 1771 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1772 $(XECHO) "... booting from 8-bit flash" ; \ 1773 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1774 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1775 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1776 $(XECHO) "... with 32 MB Flash" ; \ 1777 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1778 fi; \ 1779 else \ 1780 $(XECHO) "... booting from 64-bit flash" ; \ 1781 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ 1782 $(XECHO) "... with 32 MB Flash" ; \ 1783 echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ 1784 echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ 1785 else \ 1786 echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ 1787 fi; \ 1788 fi 1789 @$(MKCONFIG) -a PM826 ppc mpc8260 pm826 1790 1791PM828_config \ 1792PM828_PCI_config \ 1793PM828_ROMBOOT_config \ 1794PM828_ROMBOOT_PCI_config: unconfig 1795 @mkdir -p $(obj)include 1796 @mkdir -p $(obj)board/pm826 1797 @if [ "$(findstring _PCI_,$@)" ] ; then \ 1798 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 1799 $(XECHO) "... with PCI enabled" ; \ 1800 fi 1801 @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ 1802 $(XECHO) "... booting from 8-bit flash" ; \ 1803 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ 1804 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ 1805 fi 1806 @$(MKCONFIG) -a PM828 ppc mpc8260 pm828 1807 1808ppmc8260_config: unconfig 1809 @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260 1810 1811Rattler8248_config \ 1812Rattler_config: unconfig 1813 @mkdir -p $(obj)include 1814 $(if $(findstring 8248,$@), \ 1815 @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) 1816 @$(MKCONFIG) -a Rattler ppc mpc8260 rattler 1817 1818RPXsuper_config: unconfig 1819 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper 1820 1821rsdproto_config: unconfig 1822 @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto 1823 1824sacsng_config: unconfig 1825 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng 1826 1827sbc8260_config: unconfig 1828 @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260 1829 1830SCM_config: unconfig 1831 @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens 1832 1833TQM8255_AA_config \ 1834TQM8260_AA_config \ 1835TQM8260_AB_config \ 1836TQM8260_AC_config \ 1837TQM8260_AD_config \ 1838TQM8260_AE_config \ 1839TQM8260_AF_config \ 1840TQM8260_AG_config \ 1841TQM8260_AH_config \ 1842TQM8260_AI_config \ 1843TQM8265_AA_config: unconfig 1844 @mkdir -p $(obj)include 1845 @case "$@" in \ 1846 TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ 1847 TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ 1848 TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1849 TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ 1850 TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1851 TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ 1852 TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1853 TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ 1854 TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ 1855 TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ 1856 TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ 1857 esac; \ 1858 if [ "$${CTYPE}" != "MPC8260" ] ; then \ 1859 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ 1860 fi; \ 1861 echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ 1862 echo "... with $${CFREQ}MHz system clock" ; \ 1863 if [ "$${CACHE}" = "yes" ] ; then \ 1864 echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1865 $(XECHO) "... with L2 Cache support" ; \ 1866 else \ 1867 echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ 1868 $(XECHO) "... without L2 Cache support" ; \ 1869 fi; \ 1870 if [ "$${BMODE}" = "60x" ] ; then \ 1871 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1872 $(XECHO) "... with 60x Bus Mode" ; \ 1873 else \ 1874 echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ 1875 $(XECHO) "... without 60x Bus Mode" ; \ 1876 fi 1877 @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc 1878 1879TQM8272_config: unconfig 1880 @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc 1881 1882VoVPN-GW_66MHz_config \ 1883VoVPN-GW_100MHz_config: unconfig 1884 @mkdir -p $(obj)include 1885 @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h 1886 @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk 1887 1888ZPC1900_config: unconfig 1889 @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900 1890 1891######################################################################### 1892## Coldfire 1893######################################################################### 1894 1895M52277EVB_config: unconfig 1896 @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale 1897 1898M5235EVB_config \ 1899M5235EVB_Flash16_config \ 1900M5235EVB_Flash32_config: unconfig 1901 @case "$@" in \ 1902 M5235EVB_config) FLASH=16;; \ 1903 M5235EVB_Flash16_config) FLASH=16;; \ 1904 M5235EVB_Flash32_config) FLASH=32;; \ 1905 esac; \ 1906 if [ "$${FLASH}" != "16" ] ; then \ 1907 echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ 1908 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 1909 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 1910 else \ 1911 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ 1912 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ 1913 fi 1914 @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale 1915 1916M5249EVB_config : unconfig 1917 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale 1918 1919M5253DEMO_config : unconfig 1920 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale 1921 1922M5253EVBE_config : unconfig 1923 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale 1924 1925cobra5272_config : unconfig 1926 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272 1927 1928EB+MCF-EV123_config : unconfig 1929 @mkdir -p $(obj)include 1930 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 1931 @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 1932 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 1933 1934EB+MCF-EV123_internal_config : unconfig 1935 @mkdir -p $(obj)include 1936 @mkdir -p $(obj)board/BuS/EB+MCF-EV123 1937 @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk 1938 @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS 1939 1940idmr_config : unconfig 1941 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr 1942 1943M5271EVB_config : unconfig 1944 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale 1945 1946M5272C3_config : unconfig 1947 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale 1948 1949M5275EVB_config : unconfig 1950 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale 1951 1952M5282EVB_config : unconfig 1953 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale 1954 1955M5329AFEE_config \ 1956M5329BFEE_config : unconfig 1957 @case "$@" in \ 1958 M5329AFEE_config) NAND=0;; \ 1959 M5329BFEE_config) NAND=16;; \ 1960 esac; \ 1961 if [ "$${NAND}" != "0" ] ; then \ 1962 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 1963 fi 1964 @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale 1965 1966M5373EVB_config : unconfig 1967 @case "$@" in \ 1968 M5373EVB_config) NAND=16;; \ 1969 esac; \ 1970 if [ "$${NAND}" != "0" ] ; then \ 1971 echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ 1972 fi 1973 @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale 1974 1975M54451EVB_config \ 1976M54451EVB_spansion_config \ 1977M54451EVB_stmicro_config : unconfig 1978 @case "$@" in \ 1979 M54451EVB_config) FLASH=SPANSION;; \ 1980 M54451EVB_spansion_config) FLASH=SPANSION;; \ 1981 M54451EVB_stmicro_config) FLASH=STMICRO;; \ 1982 esac; \ 1983 if [ "$${FLASH}" = "SPANSION" ] ; then \ 1984 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ 1985 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 1986 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ 1987 $(XECHO) "... with SPANSION boot..." ; \ 1988 fi; \ 1989 if [ "$${FLASH}" = "STMICRO" ] ; then \ 1990 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 1991 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 1992 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ 1993 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ 1994 $(XECHO) "... with ST Micro boot..." ; \ 1995 fi; \ 1996 echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; 1997 @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale 1998 1999M54455EVB_config \ 2000M54455EVB_atmel_config \ 2001M54455EVB_intel_config \ 2002M54455EVB_a33_config \ 2003M54455EVB_a66_config \ 2004M54455EVB_i33_config \ 2005M54455EVB_i66_config \ 2006M54455EVB_stm33_config : unconfig 2007 @case "$@" in \ 2008 M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ 2009 M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ 2010 M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ 2011 M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ 2012 M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ 2013 M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ 2014 M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ 2015 M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ 2016 esac; \ 2017 if [ "$${FLASH}" = "INTEL" ] ; then \ 2018 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ 2019 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2020 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2021 $(XECHO) "... with INTEL boot..." ; \ 2022 fi; \ 2023 if [ "$${FLASH}" = "ATMEL" ] ; then \ 2024 echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ 2025 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2026 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2027 $(XECHO) "... with ATMEL boot..." ; \ 2028 fi; \ 2029 if [ "$${FLASH}" = "STMICRO" ] ; then \ 2030 echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ 2031 echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ 2032 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ 2033 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ 2034 $(XECHO) "... with ST Micro boot..." ; \ 2035 fi; \ 2036 echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ 2037 $(XECHO) "... with $${FREQ}Hz input clock" 2038 @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale 2039 2040M5475AFE_config \ 2041M5475BFE_config \ 2042M5475CFE_config \ 2043M5475DFE_config \ 2044M5475EFE_config \ 2045M5475FFE_config \ 2046M5475GFE_config : unconfig 2047 @case "$@" in \ 2048 M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2049 M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2050 M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2051 M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2052 M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2053 M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2054 M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2055 esac; \ 2056 echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ 2057 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2058 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2059 if [ "$${RAM1}" != "0" ] ; then \ 2060 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2061 fi; \ 2062 if [ "$${CODE}" != "0" ] ; then \ 2063 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2064 fi; \ 2065 if [ "$${VID}" == "1" ] ; then \ 2066 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2067 fi; \ 2068 if [ "$${USB}" == "1" ] ; then \ 2069 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2070 fi 2071 @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale 2072 2073M5485AFE_config \ 2074M5485BFE_config \ 2075M5485CFE_config \ 2076M5485DFE_config \ 2077M5485EFE_config \ 2078M5485FFE_config \ 2079M5485GFE_config \ 2080M5485HFE_config : unconfig 2081 @case "$@" in \ 2082 M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2083 M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ 2084 M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ 2085 M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ 2086 M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ 2087 M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ 2088 M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ 2089 M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ 2090 esac; \ 2091 echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ 2092 echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ 2093 echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ 2094 if [ "$${RAM1}" != "0" ] ; then \ 2095 echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ 2096 fi; \ 2097 if [ "$${CODE}" != "0" ] ; then \ 2098 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ 2099 fi; \ 2100 if [ "$${VID}" == "1" ] ; then \ 2101 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ 2102 fi; \ 2103 if [ "$${USB}" == "1" ] ; then \ 2104 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ 2105 fi 2106 @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale 2107 2108TASREG_config : unconfig 2109 @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd 2110 2111######################################################################### 2112## MPC83xx Systems 2113######################################################################### 2114 2115MPC8313ERDB_33_config \ 2116MPC8313ERDB_66_config \ 2117MPC8313ERDB_NAND_33_config \ 2118MPC8313ERDB_NAND_66_config: unconfig 2119 @mkdir -p $(obj)include 2120 @mkdir -p $(obj)board/freescale/mpc8313erdb 2121 @if [ "$(findstring _33_,$@)" ] ; then \ 2122 $(XECHO) -n "...33M ..." ; \ 2123 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ 2124 fi ; \ 2125 if [ "$(findstring _66_,$@)" ] ; then \ 2126 $(XECHO) -n "...66M..." ; \ 2127 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ 2128 fi ; \ 2129 if [ "$(findstring _NAND_,$@)" ] ; then \ 2130 $(XECHO) -n "...NAND..." ; \ 2131 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ 2132 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ 2133 fi ; 2134 @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale 2135 @if [ "$(findstring _NAND_,$@)" ] ; then \ 2136 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ 2137 fi ; 2138 2139MPC8315ERDB_config: unconfig 2140 @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale 2141 2142MPC8323ERDB_config: unconfig 2143 @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale 2144 2145MPC832XEMDS_config \ 2146MPC832XEMDS_HOST_33_config \ 2147MPC832XEMDS_HOST_66_config \ 2148MPC832XEMDS_SLAVE_config \ 2149MPC832XEMDS_ATM_config: unconfig 2150 @mkdir -p $(obj)include 2151 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2152 $(XECHO) -n "... PCI HOST " ; \ 2153 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2154 fi ; \ 2155 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2156 $(XECHO) "...PCI SLAVE 66M" ; \ 2157 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2158 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2159 fi ; \ 2160 if [ "$(findstring _33_,$@)" ] ; then \ 2161 $(XECHO) -n "...33M ..." ; \ 2162 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2163 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2164 fi ; \ 2165 if [ "$(findstring _66_,$@)" ] ; then \ 2166 $(XECHO) -n "...66M..." ; \ 2167 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2168 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2169 fi ; \ 2170 if [ "$(findstring _ATM_,$@)" ] ; then \ 2171 $(XECHO) -n "...ATM..." ; \ 2172 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2173 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2174 fi ; 2175 @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale 2176 2177MPC8349EMDS_config: unconfig 2178 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale 2179 2180MPC8349ITX_config \ 2181MPC8349ITX_LOWBOOT_config \ 2182MPC8349ITXGP_config: unconfig 2183 @mkdir -p $(obj)include 2184 @mkdir -p $(obj)board/freescale/mpc8349itx 2185 @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h 2186 @if [ "$(findstring GP,$@)" ] ; then \ 2187 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2188 fi 2189 @if [ "$(findstring LOWBOOT,$@)" ] ; then \ 2190 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ 2191 fi 2192 @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale 2193 2194MPC8360EMDS_config \ 2195MPC8360EMDS_HOST_33_config \ 2196MPC8360EMDS_HOST_66_config \ 2197MPC8360EMDS_SLAVE_config \ 2198MPC8360EMDS_ATM_config: unconfig 2199 @mkdir -p $(obj)include 2200 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2201 $(XECHO) -n "... PCI HOST " ; \ 2202 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2203 fi ; \ 2204 if [ "$(findstring _SLAVE_,$@)" ] ; then \ 2205 $(XECHO) "...PCI SLAVE 66M" ; \ 2206 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2207 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ 2208 fi ; \ 2209 if [ "$(findstring _33_,$@)" ] ; then \ 2210 $(XECHO) -n "...33M ..." ; \ 2211 echo "#define PCI_33M" >>$(obj)include/config.h ; \ 2212 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2213 fi ; \ 2214 if [ "$(findstring _66_,$@)" ] ; then \ 2215 $(XECHO) -n "...66M..." ; \ 2216 echo "#define PCI_66M" >>$(obj)include/config.h ; \ 2217 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2218 fi ; \ 2219 if [ "$(findstring _ATM_,$@)" ] ; then \ 2220 $(XECHO) -n "...ATM..." ; \ 2221 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ 2222 echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ 2223 fi ; 2224 @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale 2225 2226MPC8360ERDK_33_config \ 2227MPC8360ERDK_66_config \ 2228MPC8360ERDK_config: unconfig 2229 @mkdir -p $(obj)include 2230 @if [ "$(findstring _33_,$@)" ] ; then \ 2231 $(XECHO) -n "... CLKIN 33MHz " ; \ 2232 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ 2233 fi ; 2234 @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale 2235 2236MPC837XEMDS_config \ 2237MPC837XEMDS_HOST_config: unconfig 2238 @mkdir -p $(obj)include 2239 @if [ "$(findstring _HOST_,$@)" ] ; then \ 2240 $(XECHO) -n "... PCI HOST " ; \ 2241 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ 2242 fi ; 2243 @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale 2244 2245MPC837XERDB_config: unconfig 2246 @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale 2247 2248MVBLM7_config: unconfig 2249 @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision 2250 2251sbc8349_config: unconfig 2252 @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349 2253 2254TQM834x_config: unconfig 2255 @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc 2256 2257 2258######################################################################### 2259## MPC85xx Systems 2260######################################################################### 2261 2262ATUM8548_config: unconfig 2263 @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548 2264 2265MPC8536DS_config: unconfig 2266 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8536ds freescale 2267 2268MPC8540ADS_config: unconfig 2269 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale 2270 2271MPC8540EVAL_config \ 2272MPC8540EVAL_33_config \ 2273MPC8540EVAL_66_config \ 2274MPC8540EVAL_33_slave_config \ 2275MPC8540EVAL_66_slave_config: unconfig 2276 @mkdir -p $(obj)include 2277 @if [ "$(findstring _33_,$@)" ] ; then \ 2278 $(XECHO) "... 33 MHz PCI" ; \ 2279 else \ 2280 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ 2281 $(XECHO) "... 66 MHz PCI" ; \ 2282 fi ; \ 2283 if [ "$(findstring _slave_,$@)" ] ; then \ 2284 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ 2285 $(XECHO) " slave" ; \ 2286 else \ 2287 $(XECHO) " host" ; \ 2288 fi 2289 @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval 2290 2291MPC8560ADS_config: unconfig 2292 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale 2293 2294MPC8541CDS_legacy_config \ 2295MPC8541CDS_config: unconfig 2296 @mkdir -p $(obj)include 2297 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2298 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2299 $(XECHO) "... legacy" ; \ 2300 fi 2301 @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale 2302 2303MPC8544DS_config: unconfig 2304 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale 2305 2306MPC8548CDS_legacy_config \ 2307MPC8548CDS_config: unconfig 2308 @mkdir -p $(obj)include 2309 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2310 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2311 $(XECHO) "... legacy" ; \ 2312 fi 2313 @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale 2314 2315MPC8555CDS_legacy_config \ 2316MPC8555CDS_config: unconfig 2317 @mkdir -p $(obj)include 2318 @if [ "$(findstring _legacy_,$@)" ] ; then \ 2319 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ 2320 $(XECHO) "... legacy" ; \ 2321 fi 2322 @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale 2323 2324MPC8568MDS_config: unconfig 2325 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale 2326 2327MPC8572DS_config: unconfig 2328 @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale 2329 2330PM854_config: unconfig 2331 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854 2332 2333PM856_config: unconfig 2334 @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856 2335 2336sbc8540_config \ 2337sbc8540_33_config \ 2338sbc8540_66_config: unconfig 2339 @mkdir -p $(obj)include 2340 @if [ "$(findstring _66_,$@)" ] ; then \ 2341 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2342 $(XECHO) "... 66 MHz PCI" ; \ 2343 else \ 2344 $(XECHO) "... 33 MHz PCI" ; \ 2345 fi 2346 @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560 2347 2348sbc8548_config: unconfig 2349 @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548 2350 2351sbc8560_config \ 2352sbc8560_33_config \ 2353sbc8560_66_config: unconfig 2354 @mkdir -p $(obj)include 2355 @if [ "$(findstring _66_,$@)" ] ; then \ 2356 echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \ 2357 $(XECHO) "... 66 MHz PCI" ; \ 2358 else \ 2359 $(XECHO) "... 33 MHz PCI" ; \ 2360 fi 2361 @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560 2362 2363socrates_config: unconfig 2364 @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates 2365 2366stxgp3_config: unconfig 2367 @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 2368 2369stxssa_config \ 2370stxssa_4M_config: unconfig 2371 @mkdir -p $(obj)include 2372 @if [ "$(findstring _4M_,$@)" ] ; then \ 2373 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ 2374 $(XECHO) "... with 4 MiB flash memory" ; \ 2375 fi 2376 @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa 2377 2378TQM8540_config \ 2379TQM8541_config \ 2380TQM8548_config \ 2381TQM8555_config \ 2382TQM8560_config: unconfig 2383 @mkdir -p $(obj)include 2384 @CTYPE=$(subst TQM,,$(@:_config=)); \ 2385 $(XECHO) "... TQM"$${CTYPE}; \ 2386 echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ 2387 echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \ 2388 echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ 2389 echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; 2390 @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc 2391 2392######################################################################### 2393## MPC86xx Systems 2394######################################################################### 2395 2396MPC8610HPCD_config: unconfig 2397 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale 2398 2399MPC8641HPCN_config: unconfig 2400 @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale 2401 2402sbc8641d_config: unconfig 2403 @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d 2404 2405######################################################################### 2406## 74xx/7xx Systems 2407######################################################################### 2408 2409AmigaOneG3SE_config: unconfig 2410 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI 2411 2412BAB7xx_config: unconfig 2413 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec 2414 2415CPCI750_config: unconfig 2416 @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd 2417 2418DB64360_config: unconfig 2419 @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell 2420 2421DB64460_config: unconfig 2422 @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell 2423 2424ELPPC_config: unconfig 2425 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec 2426 2427EVB64260_config \ 2428EVB64260_750CX_config: unconfig 2429 @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260 2430 2431mpc7448hpc2_config: unconfig 2432 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale 2433 2434P3G4_config: unconfig 2435 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2436 2437p3m750_config \ 2438p3m7448_config: unconfig 2439 @mkdir -p $(obj)include 2440 @if [ "$(findstring 750_,$@)" ] ; then \ 2441 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ 2442 else \ 2443 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ 2444 fi 2445 @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive 2446 2447PCIPPC2_config \ 2448PCIPPC6_config: unconfig 2449 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2 2450 2451ppmc7xx_config: unconfig 2452 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx 2453 2454ZUMA_config: unconfig 2455 @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260 2456 2457#======================================================================== 2458# ARM 2459#======================================================================== 2460######################################################################### 2461## StrongARM Systems 2462######################################################################### 2463 2464assabet_config : unconfig 2465 @$(MKCONFIG) $(@:_config=) arm sa1100 assabet 2466 2467dnp1110_config : unconfig 2468 @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110 2469 2470gcplus_config : unconfig 2471 @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus 2472 2473lart_config : unconfig 2474 @$(MKCONFIG) $(@:_config=) arm sa1100 lart 2475 2476shannon_config : unconfig 2477 @$(MKCONFIG) $(@:_config=) arm sa1100 shannon 2478 2479######################################################################### 2480## ARM92xT Systems 2481######################################################################### 2482 2483######################################################################### 2484## Atmel AT91RM9200 Systems 2485######################################################################### 2486 2487at91rm9200dk_config : unconfig 2488 @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 2489 2490at91sam9261ek_config : unconfig 2491 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91 2492 2493at91sam9263ek_config : unconfig 2494 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91 2495 2496at91sam9rlek_config : unconfig 2497 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91 2498 2499cmc_pu2_config : unconfig 2500 @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 2501 2502csb637_config : unconfig 2503 @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200 2504 2505kb9202_config : unconfig 2506 @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200 2507 2508m501sk_config : unconfig 2509 @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200 2510 2511mp2usb_config : unconfig 2512 @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200 2513 2514######################################################################### 2515## Atmel ARM926EJ-S Systems 2516######################################################################### 2517 2518at91cap9adk_config : unconfig 2519 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91 2520 2521at91sam9260ek_config : unconfig 2522 @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91 2523 2524######################################################################## 2525## ARM Integrator boards - see doc/README-integrator for more info. 2526integratorap_config \ 2527ap_config \ 2528ap966_config \ 2529ap922_config \ 2530ap922_XA10_config \ 2531ap7_config \ 2532ap720t_config \ 2533ap920t_config \ 2534ap926ejs_config \ 2535ap946es_config: unconfig 2536 @board/integratorap/split_by_variant.sh $@ 2537 2538integratorcp_config \ 2539cp_config \ 2540cp920t_config \ 2541cp926ejs_config \ 2542cp946es_config \ 2543cp1136_config \ 2544cp966_config \ 2545cp922_config \ 2546cp922_XA10_config \ 2547cp1026_config: unconfig 2548 @board/integratorcp/split_by_variant.sh $@ 2549 2550davinci_dvevm_config : unconfig 2551 @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci 2552 2553davinci_schmoogie_config : unconfig 2554 @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci 2555 2556davinci_sffsdr_config : unconfig 2557 @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci 2558 2559davinci_sonata_config : unconfig 2560 @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci 2561 2562lpd7a400_config \ 2563lpd7a404_config: unconfig 2564 @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x 2565 2566mx1ads_config : unconfig 2567 @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx 2568 2569mx1fs2_config : unconfig 2570 @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx 2571 2572netstar_config: unconfig 2573 @$(MKCONFIG) $(@:_config=) arm arm925t netstar 2574 2575omap1510inn_config : unconfig 2576 @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn 2577 2578xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) 2579 2580omap1610inn_config \ 2581omap1610inn_cs0boot_config \ 2582omap1610inn_cs3boot_config \ 2583omap1610inn_cs_autoboot_config \ 2584omap1610h2_config \ 2585omap1610h2_cs0boot_config \ 2586omap1610h2_cs3boot_config \ 2587omap1610h2_cs_autoboot_config: unconfig 2588 @mkdir -p $(obj)include 2589 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2590 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ 2591 $(XECHO) "... configured for CS0 boot"; \ 2592 elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ 2593 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ 2594 $(XECHO) "... configured for CS_AUTO boot"; \ 2595 else \ 2596 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2597 $(XECHO) "... configured for CS3 boot"; \ 2598 fi; 2599 @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap 2600 2601omap5912osk_config : unconfig 2602 @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap 2603 2604xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) 2605 2606omap730p2_config \ 2607omap730p2_cs0boot_config \ 2608omap730p2_cs3boot_config : unconfig 2609 @mkdir -p $(obj)include 2610 @if [ "$(findstring _cs0boot_, $@)" ] ; then \ 2611 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ 2612 $(XECHO) "... configured for CS0 boot"; \ 2613 else \ 2614 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ 2615 $(XECHO) "... configured for CS3 boot"; \ 2616 fi; 2617 @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap 2618 2619sbc2410x_config: unconfig 2620 @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 2621 2622scb9328_config : unconfig 2623 @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx 2624 2625smdk2400_config : unconfig 2626 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 2627 2628smdk2410_config : unconfig 2629 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 2630 2631SX1_config : unconfig 2632 @$(MKCONFIG) $(@:_config=) arm arm925t sx1 2633 2634# TRAB default configuration: 8 MB Flash, 32 MB RAM 2635xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) 2636 2637trab_config \ 2638trab_bigram_config \ 2639trab_bigflash_config \ 2640trab_old_config: unconfig 2641 @mkdir -p $(obj)include 2642 @mkdir -p $(obj)board/trab 2643 @[ -z "$(findstring _bigram,$@)" ] || \ 2644 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2645 echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ 2646 $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \ 2647 } 2648 @[ -z "$(findstring _bigflash,$@)" ] || \ 2649 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ 2650 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2651 $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \ 2652 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2653 } 2654 @[ -z "$(findstring _old,$@)" ] || \ 2655 { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ 2656 echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ 2657 $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \ 2658 echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ 2659 } 2660 @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 2661 2662VCMA9_config : unconfig 2663 @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0 2664 2665######################################################################### 2666# ARM supplied Versatile development boards 2667######################################################################### 2668 2669cm4008_config : unconfig 2670 @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695 2671 2672cm41xx_config : unconfig 2673 @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695 2674 2675versatile_config \ 2676versatileab_config \ 2677versatilepb_config : unconfig 2678 @board/versatile/split_by_variant.sh $@ 2679 2680voiceblue_config: unconfig 2681 @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue 2682 2683######################################################################### 2684## S3C44B0 Systems 2685######################################################################### 2686 2687B2_config : unconfig 2688 @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave 2689 2690######################################################################### 2691## ARM720T Systems 2692######################################################################### 2693 2694armadillo_config: unconfig 2695 @$(MKCONFIG) $(@:_config=) arm arm720t armadillo 2696 2697ep7312_config : unconfig 2698 @$(MKCONFIG) $(@:_config=) arm arm720t ep7312 2699 2700impa7_config : unconfig 2701 @$(MKCONFIG) $(@:_config=) arm arm720t impa7 2702 2703modnet50_config : unconfig 2704 @$(MKCONFIG) $(@:_config=) arm arm720t modnet50 2705 2706evb4510_config : unconfig 2707 @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 2708 2709lpc2292sodimm_config: unconfig 2710 @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 2711 2712SMN42_config : unconfig 2713 @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 2714 2715######################################################################### 2716## XScale Systems 2717######################################################################### 2718 2719actux1_config : unconfig 2720 @$(MKCONFIG) $(@:_config=) arm ixp actux1 2721 2722actux2_config : unconfig 2723 @$(MKCONFIG) $(@:_config=) arm ixp actux2 2724 2725actux3_config : unconfig 2726 @$(MKCONFIG) $(@:_config=) arm ixp actux3 2727 2728actux4_config : unconfig 2729 @$(MKCONFIG) $(@:_config=) arm ixp actux4 2730 2731cerf250_config : unconfig 2732 @$(MKCONFIG) $(@:_config=) arm pxa cerf250 2733 2734cradle_config : unconfig 2735 @$(MKCONFIG) $(@:_config=) arm pxa cradle 2736 2737csb226_config : unconfig 2738 @$(MKCONFIG) $(@:_config=) arm pxa csb226 2739 2740delta_config : unconfig 2741 @$(MKCONFIG) $(@:_config=) arm pxa delta 2742 2743innokom_config : unconfig 2744 @$(MKCONFIG) $(@:_config=) arm pxa innokom 2745 2746ixdp425_config : unconfig 2747 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 2748 2749ixdpg425_config : unconfig 2750 @$(MKCONFIG) $(@:_config=) arm ixp ixdp425 2751 2752lubbock_config : unconfig 2753 @$(MKCONFIG) $(@:_config=) arm pxa lubbock 2754 2755pleb2_config : unconfig 2756 @$(MKCONFIG) $(@:_config=) arm pxa pleb2 2757 2758logodl_config : unconfig 2759 @$(MKCONFIG) $(@:_config=) arm pxa logodl 2760 2761pdnb3_config \ 2762scpu_config: unconfig 2763 @mkdir -p $(obj)include 2764 @if [ "$(findstring scpu_,$@)" ] ; then \ 2765 echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ 2766 $(XECHO) "... on SCPU board variant" ; \ 2767 fi 2768 @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive 2769 2770pxa255_idp_config: unconfig 2771 @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp 2772 2773trizepsiv_config : unconfig 2774 @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv 2775 2776wepep250_config : unconfig 2777 @$(MKCONFIG) $(@:_config=) arm pxa wepep250 2778 2779xaeniax_config : unconfig 2780 @$(MKCONFIG) $(@:_config=) arm pxa xaeniax 2781 2782xm250_config : unconfig 2783 @$(MKCONFIG) $(@:_config=) arm pxa xm250 2784 2785xsengine_config : unconfig 2786 @$(MKCONFIG) $(@:_config=) arm pxa xsengine 2787 2788zylonite_config : 2789 @$(MKCONFIG) $(@:_config=) arm pxa zylonite 2790 2791######################################################################### 2792## ARM1136 Systems 2793######################################################################### 2794 2795apollon_config : unconfig 2796 @mkdir -p $(obj)include 2797 @mkdir -p $(obj)onenand_ipl/board/apollon 2798 @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h 2799 @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx 2800 @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk 2801 2802imx31_litekit_config : unconfig 2803 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 2804 2805imx31_phycore_config : unconfig 2806 @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 2807 2808mx31ads_config : unconfig 2809 @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 2810 2811omap2420h4_config : unconfig 2812 @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx 2813 2814######################################################################### 2815## ARM1176 Systems 2816######################################################################### 2817smdk6400_noUSB_config \ 2818smdk6400_config : unconfig 2819 @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 2820 @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 2821 @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h 2822 @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ 2823 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 2824 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 2825 else \ 2826 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ 2827 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ 2828 fi 2829 @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk 2830 2831#======================================================================== 2832# i386 2833#======================================================================== 2834######################################################################### 2835## AMD SC520 CDP 2836######################################################################### 2837sc520_cdp_config : unconfig 2838 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp 2839 2840sc520_spunk_config : unconfig 2841 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk 2842 2843sc520_spunk_rel_config : unconfig 2844 @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk 2845 2846#======================================================================== 2847# MIPS 2848#======================================================================== 2849######################################################################### 2850## MIPS32 4Kc 2851######################################################################### 2852 2853xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) 2854 2855incaip_100MHz_config \ 2856incaip_133MHz_config \ 2857incaip_150MHz_config \ 2858incaip_config: unconfig 2859 @mkdir -p $(obj)include 2860 @[ -z "$(findstring _100MHz,$@)" ] || \ 2861 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \ 2862 $(XECHO) "... with 100MHz system clock" ; \ 2863 } 2864 @[ -z "$(findstring _133MHz,$@)" ] || \ 2865 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \ 2866 $(XECHO) "... with 133MHz system clock" ; \ 2867 } 2868 @[ -z "$(findstring _150MHz,$@)" ] || \ 2869 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ 2870 $(XECHO) "... with 150MHz system clock" ; \ 2871 } 2872 @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip 2873 2874tb0229_config: unconfig 2875 @$(MKCONFIG) $(@:_config=) mips mips tb0229 2876 2877######################################################################### 2878## MIPS32 AU1X00 2879######################################################################### 2880 2881dbau1000_config : unconfig 2882 @mkdir -p $(obj)include 2883 @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h 2884 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2885 2886dbau1100_config : unconfig 2887 @mkdir -p $(obj)include 2888 @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h 2889 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2890 2891dbau1500_config : unconfig 2892 @mkdir -p $(obj)include 2893 @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h 2894 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2895 2896dbau1550_config : unconfig 2897 @mkdir -p $(obj)include 2898 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 2899 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2900 2901dbau1550_el_config : unconfig 2902 @mkdir -p $(obj)include 2903 @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h 2904 @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 2905 2906gth2_config : unconfig 2907 @mkdir -p $(obj)include 2908 @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h 2909 @$(MKCONFIG) -a gth2 mips mips gth2 2910 2911pb1000_config : unconfig 2912 @mkdir -p $(obj)include 2913 @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h 2914 @$(MKCONFIG) -a pb1x00 mips mips pb1x00 2915 2916qemu_mips_config : unconfig 2917 @mkdir -p $(obj)include 2918 @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h 2919 @$(MKCONFIG) -a qemu-mips mips mips qemu-mips 2920 2921######################################################################### 2922## MIPS64 5Kc 2923######################################################################### 2924 2925purple_config : unconfig 2926 @$(MKCONFIG) $(@:_config=) mips mips purple 2927 2928#======================================================================== 2929# Nios 2930#======================================================================== 2931######################################################################### 2932## Nios32 2933######################################################################### 2934 2935ADNPESC1_DNPEVA2_base_32_config \ 2936ADNPESC1_base_32_config \ 2937ADNPESC1_config: unconfig 2938 @mkdir -p $(obj)include 2939 @[ -z "$(findstring _DNPEVA2,$@)" ] || \ 2940 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \ 2941 $(XECHO) "... DNP/EVA2 configuration" ; \ 2942 } 2943 @[ -z "$(findstring _base_32,$@)" ] || \ 2944 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 2945 $(XECHO) "... NIOS 'base_32' configuration" ; \ 2946 } 2947 @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ 2948 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \ 2949 $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \ 2950 } 2951 @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv 2952 2953DK1C20_safe_32_config \ 2954DK1C20_standard_32_config \ 2955DK1C20_config: unconfig 2956 @mkdir -p $(obj)include 2957 @[ -z "$(findstring _safe_32,$@)" ] || \ 2958 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 2959 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 2960 } 2961 @[ -z "$(findstring _standard_32,$@)" ] || \ 2962 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 2963 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 2964 } 2965 @[ -z "$(findstring DK1C20_config,$@)" ] || \ 2966 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 2967 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 2968 } 2969 @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera 2970 2971DK1S10_safe_32_config \ 2972DK1S10_standard_32_config \ 2973DK1S10_mtx_ldk_20_config \ 2974DK1S10_config: unconfig 2975 @mkdir -p $(obj)include 2976 @[ -z "$(findstring _safe_32,$@)" ] || \ 2977 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \ 2978 $(XECHO) "... NIOS 'safe_32' configuration" ; \ 2979 } 2980 @[ -z "$(findstring _standard_32,$@)" ] || \ 2981 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 2982 $(XECHO) "... NIOS 'standard_32' configuration" ; \ 2983 } 2984 @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ 2985 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \ 2986 $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \ 2987 } 2988 @[ -z "$(findstring DK1S10_config,$@)" ] || \ 2989 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \ 2990 $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \ 2991 } 2992 @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera 2993 2994######################################################################### 2995## Nios-II 2996######################################################################### 2997 2998EP1C20_config : unconfig 2999 @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera 3000 3001EP1S10_config : unconfig 3002 @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera 3003 3004EP1S40_config : unconfig 3005 @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera 3006 3007PK1C20_config : unconfig 3008 @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent 3009 3010PCI5441_config : unconfig 3011 @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent 3012 3013#======================================================================== 3014## Microblaze 3015#======================================================================== 3016 3017ml401_config: unconfig 3018 @mkdir -p $(obj)include 3019 @echo "#define CONFIG_ML401 1" > $(obj)include/config.h 3020 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx 3021 3022suzaku_config: unconfig 3023 @mkdir -p $(obj)include 3024 @echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h 3025 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno 3026 3027xupv2p_config: unconfig 3028 @mkdir -p $(obj)include 3029 @echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h 3030 @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx 3031 3032#======================================================================== 3033# Blackfin 3034#======================================================================== 3035 3036# Analog Devices boards 3037BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit 3038 3039$(BFIN_BOARDS:%=%_config) : unconfig 3040 @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) 3041 3042$(BFIN_BOARDS): 3043 $(MAKE) $@_config 3044 $(MAKE) 3045 3046#======================================================================== 3047# AVR32 3048#======================================================================== 3049 3050atngw100_config : unconfig 3051 @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x 3052 3053atstk1002_config : unconfig 3054 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3055 3056atstk1003_config : unconfig 3057 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3058 3059atstk1004_config : unconfig 3060 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3061 3062atstk1006_config : unconfig 3063 @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x 3064 3065favr-32-ezkit_config : unconfig 3066 @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x 3067 3068hammerhead_config : unconfig 3069 @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x 3070 3071mimc200_config : unconfig 3072 @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x 3073 3074#======================================================================== 3075# SH3 (SuperH) 3076#======================================================================== 3077 3078######################################################################### 3079## sh2 (Renesas SuperH) 3080######################################################################### 3081rsk7203_config: unconfig 3082 @ >include/config.h 3083 @echo "#define CONFIG_RSK7203 1" >> include/config.h 3084 @./mkconfig -a $(@:_config=) sh sh2 rsk7203 3085 3086######################################################################### 3087## sh3 (Renesas SuperH) 3088######################################################################### 3089 3090mpr2_config: unconfig 3091 @mkdir -p $(obj)include 3092 @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h 3093 @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 3094 3095ms7720se_config: unconfig 3096 @mkdir -p $(obj)include 3097 @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h 3098 @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se 3099 3100######################################################################### 3101## sh4 (Renesas SuperH) 3102######################################################################### 3103 3104MigoR_config : unconfig 3105 @mkdir -p $(obj)include 3106 @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h 3107 @./mkconfig -a $(@:_config=) sh sh4 MigoR 3108 3109ms7750se_config: unconfig 3110 @mkdir -p $(obj)include 3111 @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h 3112 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se 3113 3114ms7722se_config : unconfig 3115 @mkdir -p $(obj)include 3116 @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h 3117 @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se 3118 3119r2dplus_config : unconfig 3120 @mkdir -p $(obj)include 3121 @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h 3122 @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus 3123 3124r7780mp_config: unconfig 3125 @mkdir -p $(obj)include 3126 @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h 3127 @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp 3128 3129sh7763rdp_config : unconfig 3130 @mkdir -p $(obj)include 3131 @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h 3132 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp 3133 3134sh7785lcr_config : unconfig 3135 @ >include/config.h 3136 @echo "#define CONFIG_SH7785LCR 1" >> include/config.h 3137 @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr 3138 3139ap325rxa_config : unconfig 3140 @mkdir -p $(obj)include 3141 @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h 3142 @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa 3143 3144#======================================================================== 3145# SPARC 3146#======================================================================== 3147 3148######################################################################### 3149## LEON3 3150######################################################################### 3151 3152# Gaisler GR-XC3S-1500 board 3153gr_xc3s_1500_config : unconfig 3154 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler 3155 3156# Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system 3157gr_cpci_ax2000_config : unconfig 3158 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler 3159 3160# Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS 3161# Development board Stratix II edition, FPGA Device EP2S60. 3162gr_ep2s60_config: unconfig 3163 @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler 3164 3165# Gaisler LEON3 GRSIM simulator 3166grsim_config : unconfig 3167 @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler 3168 3169######################################################################### 3170## LEON2 3171######################################################################### 3172 3173# Gaisler LEON2 GRSIM simulator 3174grsim_leon2_config : unconfig 3175 @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler 3176 3177######################################################################### 3178######################################################################### 3179######################################################################### 3180 3181clean: 3182 @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \ 3183 $(obj)examples/hello_world $(obj)examples/interrupt \ 3184 $(obj)examples/mem_to_mem_idma2intr \ 3185 $(obj)examples/sched $(obj)examples/smc91111_eeprom \ 3186 $(obj)examples/test_burst $(obj)examples/timer 3187 @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ 3188 $(obj)tools/env/{fw_printenv,fw_setenv} \ 3189 $(obj)tools/envcrc \ 3190 $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ 3191 $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ 3192 $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ 3193 $(obj)tools/ncb $(obj)tools/ubsha1 3194 @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ 3195 $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ 3196 $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ 3197 $(obj)board/{integratorap,integratorcp}/u-boot.lds \ 3198 $(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \ 3199 $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] 3200 @rm -f $(obj)include/bmp_logo.h 3201 @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} 3202 @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} 3203 @rm -f $(obj)api_examples/demo $(VERSION_FILE) 3204 @find $(OBJTREE) -type f \ 3205 \( -name 'core' -o -name '*.bak' -o -name '*~' \ 3206 -o -name '*.o' -o -name '*.a' \) -print \ 3207 | xargs rm -f 3208 3209clobber: clean 3210 @find $(OBJTREE) -type f \( -name .depend \ 3211 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ 3212 -print0 \ 3213 | xargs -0 rm -f 3214 @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ 3215 $(obj)cscope.* $(obj)*.*~ 3216 @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) 3217 @rm -f $(obj)tools/{crc32.c,env_embedded.c,env/crc32.c,md5.c,sha1.c,inca-swap-bytes} 3218 @rm -f $(obj)tools/{image.c,fdt.c,fdt_ro.c,fdt_rw.c,fdt_strerror.c,zlib.h} 3219 @rm -f $(obj)tools/{fdt_wip.c,libfdt_internal.h} 3220 @rm -f $(obj)cpu/mpc824x/bedbug_603e.c 3221 @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm 3222 @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f 3223 @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f 3224 @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f 3225 3226ifeq ($(OBJTREE),$(SRCTREE)) 3227mrproper \ 3228distclean: clobber unconfig 3229else 3230mrproper \ 3231distclean: clobber unconfig 3232 rm -rf $(obj)* 3233endif 3234 3235backup: 3236 F=`basename $(TOPDIR)` ; cd .. ; \ 3237 gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 3238 3239######################################################################### 3240