1VERSION = 2015 2PATCHLEVEL = 01 3SUBLEVEL = 4EXTRAVERSION = -rc1 5NAME = 6 7# *DOCUMENTATION* 8# To see a list of typical targets execute "make help" 9# More info can be located in ./README 10# Comments in this file are targeted only to the developer, do not 11# expect to learn how to build the kernel reading this file. 12 13# Do not use make's built-in rules and variables 14# (this increases performance and avoids hard-to-debug behaviour); 15MAKEFLAGS += -rR 16 17# Avoid funny character set dependencies 18unexport LC_ALL 19LC_COLLATE=C 20LC_NUMERIC=C 21export LC_COLLATE LC_NUMERIC 22 23# Avoid interference with shell env settings 24unexport GREP_OPTIONS 25 26# We are using a recursive build, so we need to do a little thinking 27# to get the ordering right. 28# 29# Most importantly: sub-Makefiles should only ever modify files in 30# their own directory. If in some directory we have a dependency on 31# a file in another dir (which doesn't happen often, but it's often 32# unavoidable when linking the built-in.o targets which finally 33# turn into vmlinux), we will call a sub make in that other dir, and 34# after that we are sure that everything which is in that other dir 35# is now up to date. 36# 37# The only cases where we need to modify files which have global 38# effects are thus separated out and done before the recursive 39# descending is started. They are now explicitly listed as the 40# prepare rule. 41 42# Beautify output 43# --------------------------------------------------------------------------- 44# 45# Normally, we echo the whole command before executing it. By making 46# that echo $($(quiet)$(cmd)), we now have the possibility to set 47# $(quiet) to choose other forms of output instead, e.g. 48# 49# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 50# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 51# 52# If $(quiet) is empty, the whole command will be printed. 53# If it is set to "quiet_", only the short version will be printed. 54# If it is set to "silent_", nothing will be printed at all, since 55# the variable $(silent_cmd_cc_o_c) doesn't exist. 56# 57# A simple variant is to prefix commands with $(Q) - that's useful 58# for commands that shall be hidden in non-verbose mode. 59# 60# $(Q)ln $@ :< 61# 62# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 63# If KBUILD_VERBOSE equals 1 then the above command is displayed. 64# 65# To put more focus on warnings, be less verbose as default 66# Use 'make V=1' to see the full commands 67 68ifeq ("$(origin V)", "command line") 69 KBUILD_VERBOSE = $(V) 70endif 71ifndef KBUILD_VERBOSE 72 KBUILD_VERBOSE = 0 73endif 74 75ifeq ($(KBUILD_VERBOSE),1) 76 quiet = 77 Q = 78else 79 quiet=quiet_ 80 Q = @ 81endif 82 83# If the user is running make -s (silent mode), suppress echoing of 84# commands 85 86ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 87ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) 88 quiet=silent_ 89endif 90else # make-3.8x 91ifneq ($(filter s% -s%,$(MAKEFLAGS)),) 92 quiet=silent_ 93endif 94endif 95 96export quiet Q KBUILD_VERBOSE 97 98# kbuild supports saving output files in a separate directory. 99# To locate output files in a separate directory two syntaxes are supported. 100# In both cases the working directory must be the root of the kernel src. 101# 1) O= 102# Use "make O=dir/to/store/output/files/" 103# 104# 2) Set KBUILD_OUTPUT 105# Set the environment variable KBUILD_OUTPUT to point to the directory 106# where the output files shall be placed. 107# export KBUILD_OUTPUT=dir/to/store/output/files/ 108# make 109# 110# The O= assignment takes precedence over the KBUILD_OUTPUT environment 111# variable. 112 113# KBUILD_SRC is set on invocation of make in OBJ directory 114# KBUILD_SRC is not intended to be used by the regular user (for now) 115ifeq ($(KBUILD_SRC),) 116 117# OK, Make called in directory where kernel src resides 118# Do we want to locate output files in a separate directory? 119ifeq ("$(origin O)", "command line") 120 KBUILD_OUTPUT := $(O) 121endif 122 123# That's our default target when none is given on the command line 124PHONY := _all 125_all: 126 127# Cancel implicit rules on top Makefile 128$(CURDIR)/Makefile Makefile: ; 129 130ifneq ($(KBUILD_OUTPUT),) 131# Invoke a second make in the output directory, passing relevant variables 132# check that the output directory actually exists 133saved-output := $(KBUILD_OUTPUT) 134KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ 135 && /bin/pwd) 136$(if $(KBUILD_OUTPUT),, \ 137 $(error failed to create output directory "$(saved-output)")) 138 139PHONY += $(MAKECMDGOALS) sub-make 140 141$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make 142 @: 143 144sub-make: FORCE 145 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ 146 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) 147 148# Leave processing to above invocation of make 149skip-makefile := 1 150endif # ifneq ($(KBUILD_OUTPUT),) 151endif # ifeq ($(KBUILD_SRC),) 152 153# We process the rest of the Makefile if this is the final invocation of make 154ifeq ($(skip-makefile),) 155 156# Do not print "Entering directory ...", 157# but we want to display it when entering to the output directory 158# so that IDEs/editors are able to understand relative filenames. 159MAKEFLAGS += --no-print-directory 160 161# Call a source code checker (by default, "sparse") as part of the 162# C compilation. 163# 164# Use 'make C=1' to enable checking of only re-compiled files. 165# Use 'make C=2' to enable checking of *all* source files, regardless 166# of whether they are re-compiled or not. 167# 168# See the file "Documentation/sparse.txt" for more details, including 169# where to get the "sparse" utility. 170 171ifeq ("$(origin C)", "command line") 172 KBUILD_CHECKSRC = $(C) 173endif 174ifndef KBUILD_CHECKSRC 175 KBUILD_CHECKSRC = 0 176endif 177 178# Use make M=dir to specify directory of external module to build 179# Old syntax make ... SUBDIRS=$PWD is still supported 180# Setting the environment variable KBUILD_EXTMOD take precedence 181ifdef SUBDIRS 182 KBUILD_EXTMOD ?= $(SUBDIRS) 183endif 184 185ifeq ("$(origin M)", "command line") 186 KBUILD_EXTMOD := $(M) 187endif 188 189# If building an external module we do not care about the all: rule 190# but instead _all depend on modules 191PHONY += all 192ifeq ($(KBUILD_EXTMOD),) 193_all: all 194else 195_all: modules 196endif 197 198ifeq ($(KBUILD_SRC),) 199 # building in the source tree 200 srctree := . 201else 202 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) 203 # building in a subdirectory of the source tree 204 srctree := .. 205 else 206 srctree := $(KBUILD_SRC) 207 endif 208endif 209objtree := . 210src := $(srctree) 211obj := $(objtree) 212 213VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 214 215export srctree objtree VPATH 216 217# Make sure CDPATH settings don't interfere 218unexport CDPATH 219 220######################################################################### 221 222HOSTARCH := $(shell uname -m | \ 223 sed -e s/i.86/x86/ \ 224 -e s/sun4u/sparc64/ \ 225 -e s/arm.*/arm/ \ 226 -e s/sa110/arm/ \ 227 -e s/ppc64/powerpc/ \ 228 -e s/ppc/powerpc/ \ 229 -e s/macppc/powerpc/\ 230 -e s/sh.*/sh/) 231 232HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ 233 sed -e 's/\(cygwin\).*/cygwin/') 234 235export HOSTARCH HOSTOS 236 237######################################################################### 238 239# set default to nothing for native builds 240ifeq ($(HOSTARCH),$(ARCH)) 241CROSS_COMPILE ?= 242endif 243 244KCONFIG_CONFIG ?= .config 245export KCONFIG_CONFIG 246 247# SHELL used by kbuild 248CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 249 else if [ -x /bin/bash ]; then echo /bin/bash; \ 250 else echo sh; fi ; fi) 251 252HOSTCC = cc 253HOSTCXX = c++ 254HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer 255HOSTCXXFLAGS = -O2 256 257ifeq ($(HOSTOS),cygwin) 258HOSTCFLAGS += -ansi 259endif 260 261# Mac OS X / Darwin's C preprocessor is Apple specific. It 262# generates numerous errors and warnings. We want to bypass it 263# and use GNU C's cpp. To do this we pass the -traditional-cpp 264# option to the compiler. Note that the -traditional-cpp flag 265# DOES NOT have the same semantics as GNU C's flag, all it does 266# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. 267# 268# Apple's linker is similar, thanks to the new 2 stage linking 269# multiple symbol definitions are treated as errors, hence the 270# -multiply_defined suppress option to turn off this error. 271# 272ifeq ($(HOSTOS),darwin) 273# get major and minor product version (e.g. '10' and '6' for Snow Leopard) 274DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.') 275DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.') 276 277os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \ 278 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;) 279 280# Snow Leopards build environment has no longer restrictions as described above 281HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc") 282HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp") 283HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress") 284endif 285 286# Decide whether to build built-in, modular, or both. 287# Normally, just do built-in. 288 289KBUILD_MODULES := 290KBUILD_BUILTIN := 1 291 292# If we have only "make modules", don't compile built-in objects. 293# When we're building modules with modversions, we need to consider 294# the built-in objects during the descend as well, in order to 295# make sure the checksums are up to date before we record them. 296 297ifeq ($(MAKECMDGOALS),modules) 298 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 299endif 300 301# If we have "make <whatever> modules", compile modules 302# in addition to whatever we do anyway. 303# Just "make" or "make all" shall build modules as well 304 305# U-Boot does not need modules 306#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 307# KBUILD_MODULES := 1 308#endif 309 310#ifeq ($(MAKECMDGOALS),) 311# KBUILD_MODULES := 1 312#endif 313 314export KBUILD_MODULES KBUILD_BUILTIN 315export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 316 317# Look for make include files relative to root of kernel src 318MAKEFLAGS += --include-dir=$(srctree) 319 320# We need some generic definitions (do not try to remake the file). 321$(srctree)/scripts/Kbuild.include: ; 322include $(srctree)/scripts/Kbuild.include 323 324# Make variables (CC, etc...) 325 326AS = $(CROSS_COMPILE)as 327# Always use GNU ld 328ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),) 329LD = $(CROSS_COMPILE)ld.bfd 330else 331LD = $(CROSS_COMPILE)ld 332endif 333CC = $(CROSS_COMPILE)gcc 334CPP = $(CC) -E 335AR = $(CROSS_COMPILE)ar 336NM = $(CROSS_COMPILE)nm 337LDR = $(CROSS_COMPILE)ldr 338STRIP = $(CROSS_COMPILE)strip 339OBJCOPY = $(CROSS_COMPILE)objcopy 340OBJDUMP = $(CROSS_COMPILE)objdump 341AWK = awk 342PERL = perl 343PYTHON = python 344DTC = dtc 345CHECK = sparse 346 347CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 348 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) 349 350KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ 351 352KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ 353 -Wno-format-security \ 354 -fno-builtin -ffreestanding 355KBUILD_AFLAGS := -D__ASSEMBLY__ 356 357# Read UBOOTRELEASE from include/config/uboot.release (if it exists) 358UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) 359UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 360 361export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION 362export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR 363export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC 364export CPP AR NM LDR STRIP OBJCOPY OBJDUMP 365export MAKE AWK PERL PYTHON 366export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS 367 368export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS 369export KBUILD_CFLAGS KBUILD_AFLAGS 370 371# When compiling out-of-tree modules, put MODVERDIR in the module 372# tree rather than in the kernel tree. The kernel tree might 373# even be read-only. 374export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 375 376# Files to ignore in find ... statements 377 378export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 379 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 380 -prune -o 381export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 382 --exclude CVS --exclude .pc --exclude .hg --exclude .git 383 384# =========================================================================== 385# Rules shared between *config targets and build targets 386 387# Basic helpers built in scripts/ 388PHONY += scripts_basic 389scripts_basic: 390 $(Q)$(MAKE) $(build)=scripts/basic 391 $(Q)rm -f .tmp_quiet_recordmcount 392 393# To avoid any implicit rule to kick in, define an empty command. 394scripts/basic/%: scripts_basic ; 395 396PHONY += outputmakefile 397# outputmakefile generates a Makefile in the output directory, if using a 398# separate output directory. This allows convenient use of make in the 399# output directory. 400outputmakefile: 401ifneq ($(KBUILD_SRC),) 402 $(Q)ln -fsn $(srctree) source 403 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ 404 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) 405endif 406 407# To make sure we do not include .config for any of the *config targets 408# catch them early, and hand them over to scripts/kconfig/Makefile 409# It is allowed to specify more targets when calling make, including 410# mixing *config targets and build targets. 411# For example 'make oldconfig all'. 412# Detect when mixed targets is specified, and make a second invocation 413# of make so .config is not included in this case either (for *config). 414 415version_h := include/generated/version_autogenerated.h 416timestamp_h := include/generated/timestamp_autogenerated.h 417 418no-dot-config-targets := clean clobber mrproper distclean \ 419 help %docs check% coccicheck \ 420 ubootversion backup 421 422config-targets := 0 423mixed-targets := 0 424dot-config := 1 425 426ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 427 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 428 dot-config := 0 429 endif 430endif 431 432ifeq ($(KBUILD_EXTMOD),) 433 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 434 config-targets := 1 435 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) 436 mixed-targets := 1 437 endif 438 endif 439endif 440 441ifeq ($(mixed-targets),1) 442# =========================================================================== 443# We're called with mixed targets (*config and build targets). 444# Handle them one by one. 445 446PHONY += $(MAKECMDGOALS) __build_one_by_one 447 448$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one 449 @: 450 451__build_one_by_one: 452 $(Q)set -e; \ 453 for i in $(MAKECMDGOALS); do \ 454 $(MAKE) -f $(srctree)/Makefile $$i; \ 455 done 456 457else 458ifeq ($(config-targets),1) 459# =========================================================================== 460# *config targets only - make sure prerequisites are updated, and descend 461# in scripts/kconfig to make the *config target 462 463KBUILD_DEFCONFIG := sandbox_defconfig 464export KBUILD_DEFCONFIG KBUILD_KCONFIG 465 466config: scripts_basic outputmakefile FORCE 467 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ 468 469%config: scripts_basic outputmakefile FORCE 470 +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ 471 472else 473# =========================================================================== 474# Build targets only - this includes vmlinux, arch specific targets, clean 475# targets and others. In general all targets except *config targets. 476 477ifeq ($(dot-config),1) 478# Read in config 479-include include/config/auto.conf 480 481# Read in dependencies to all Kconfig* files, make sure to run 482# oldconfig if changes are detected. 483-include include/config/auto.conf.cmd 484 485# To avoid any implicit rule to kick in, define an empty command 486$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; 487 488# If .config is newer than include/config/auto.conf, someone tinkered 489# with it and forgot to run make oldconfig. 490# if auto.conf.cmd is missing then we are probably in a cleaned tree so 491# we execute the config step to be sure to catch updated Kconfig files 492include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd 493 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig 494 495-include include/autoconf.mk 496-include include/autoconf.mk.dep 497 498# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf 499# is up-to-date. When we switch to a different board configuration, old CONFIG 500# macros are still remaining in include/config/auto.conf. Without the following 501# gimmick, wrong config.mk would be included leading nasty warnings/errors. 502autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \ 503 -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG))) 504ifneq ($(autoconf_is_current),) 505include $(srctree)/config.mk 506endif 507 508# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use 509# that (or fail if absent). Otherwise, search for a linker script in a 510# standard location. 511 512ifndef LDSCRIPT 513 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug 514 ifdef CONFIG_SYS_LDSCRIPT 515 # need to strip off double quotes 516 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%) 517 endif 518endif 519 520# If there is no specified link script, we look in a number of places for it 521ifndef LDSCRIPT 522 ifeq ($(wildcard $(LDSCRIPT)),) 523 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds 524 endif 525 ifeq ($(wildcard $(LDSCRIPT)),) 526 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds 527 endif 528 ifeq ($(wildcard $(LDSCRIPT)),) 529 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds 530 endif 531endif 532 533else 534# Dummy target needed, because used as prerequisite 535include/config/auto.conf: ; 536endif # $(dot-config) 537 538ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 539KBUILD_CFLAGS += -Os 540else 541KBUILD_CFLAGS += -O2 542endif 543 544ifdef BUILD_TAG 545KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' 546endif 547 548KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector) 549 550KBUILD_CFLAGS += -g 551# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format> 552# option to the assembler. 553KBUILD_AFLAGS += -g 554 555# Report stack usage if supported 556ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y) 557 KBUILD_CFLAGS += -fstack-usage 558endif 559 560KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral) 561 562# turn jbsr into jsr for m68k 563ifeq ($(ARCH),m68k) 564ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4) 565KBUILD_AFLAGS += -Wa,-gstabs,-S 566endif 567endif 568 569# Prohibit date/time macros, which would make the build non-deterministic 570KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) 571 572ifneq ($(CONFIG_SYS_TEXT_BASE),) 573KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) 574endif 575 576export CONFIG_SYS_TEXT_BASE 577 578include $(srctree)/scripts/Makefile.extrawarn 579 580# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 581KBUILD_CPPFLAGS += $(KCPPFLAGS) 582KBUILD_AFLAGS += $(KAFLAGS) 583KBUILD_CFLAGS += $(KCFLAGS) 584 585# Use UBOOTINCLUDE when you must reference the include/ directory. 586# Needed to be compatible with the O= option 587UBOOTINCLUDE := \ 588 -Iinclude \ 589 $(if $(KBUILD_SRC), -I$(srctree)/include) \ 590 -I$(srctree)/arch/$(ARCH)/include \ 591 -include $(srctree)/include/linux/kconfig.h 592 593NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 594CHECKFLAGS += $(NOSTDINC_FLAGS) 595 596# FIX ME 597cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ 598 $(NOSTDINC_FLAGS) 599c_flags := $(KBUILD_CFLAGS) $(cpp_flags) 600 601######################################################################### 602# U-Boot objects....order is important (i.e. start must be first) 603 604head-y := $(CPUDIR)/start.o 605head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o 606head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o 607 608HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) 609 610libs-y += lib/ 611libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ 612libs-y += $(CPUDIR)/ 613libs-$(CONFIG_OF_EMBED) += dts/ 614libs-y += arch/$(ARCH)/lib/ 615libs-y += fs/ 616libs-y += net/ 617libs-y += disk/ 618libs-y += drivers/ 619libs-y += drivers/dma/ 620libs-y += drivers/gpio/ 621libs-y += drivers/i2c/ 622libs-y += drivers/mmc/ 623libs-y += drivers/mtd/ 624libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ 625libs-y += drivers/mtd/onenand/ 626libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ 627libs-y += drivers/mtd/spi/ 628libs-y += drivers/net/ 629libs-y += drivers/net/phy/ 630libs-y += drivers/pci/ 631libs-y += drivers/power/ \ 632 drivers/power/fuel_gauge/ \ 633 drivers/power/mfd/ \ 634 drivers/power/pmic/ \ 635 drivers/power/battery/ 636libs-y += drivers/spi/ 637libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/ 638libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ 639libs-y += drivers/serial/ 640libs-y += drivers/usb/eth/ 641libs-y += drivers/usb/gadget/ 642libs-y += drivers/usb/host/ 643libs-y += drivers/usb/musb/ 644libs-y += drivers/usb/musb-new/ 645libs-y += drivers/usb/phy/ 646libs-y += drivers/usb/ulpi/ 647libs-y += common/ 648libs-y += lib/libfdt/ 649libs-$(CONFIG_API) += api/ 650libs-$(CONFIG_HAS_POST) += post/ 651libs-y += test/ 652libs-y += test/dm/ 653 654ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) 655libs-y += arch/$(ARCH)/imx-common/ 656endif 657 658ifneq (,$(filter $(SOC), armada-xp kirkwood)) 659libs-y += arch/$(ARCH)/mvebu-common/ 660endif 661 662libs-$(CONFIG_ARM) += arch/arm/cpu/ 663libs-$(CONFIG_PPC) += arch/powerpc/cpu/ 664 665libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) 666 667libs-y := $(sort $(libs-y)) 668 669u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples 670 671u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-)))) 672 673libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) 674 675u-boot-init := $(head-y) 676u-boot-main := $(libs-y) 677 678 679# Add GCC lib 680ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) 681PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a 682else 683PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc 684endif 685PLATFORM_LIBS += $(PLATFORM_LIBGCC) 686export PLATFORM_LIBS 687export PLATFORM_LIBGCC 688 689# Special flags for CPP when processing the linker script. 690# Pass the version down so we can handle backwards compatibility 691# on the fly. 692LDPPFLAGS += \ 693 -include $(srctree)/include/u-boot/u-boot.lds.h \ 694 -DCPUDIR=$(CPUDIR) \ 695 $(shell $(LD) --version | \ 696 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') 697 698######################################################################### 699######################################################################### 700 701ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) 702BOARD_SIZE_CHECK = \ 703 @actual=`wc -c $@ | awk '{print $$1}'`; \ 704 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \ 705 if test $$actual -gt $$limit; then \ 706 echo "$@ exceeds file size limit:" >&2 ; \ 707 echo " limit: $$limit bytes" >&2 ; \ 708 echo " actual: $$actual bytes" >&2 ; \ 709 echo " excess: $$((actual - limit)) bytes" >&2; \ 710 exit 1; \ 711 fi 712else 713BOARD_SIZE_CHECK = 714endif 715 716# Statically apply RELA-style relocations (currently arm64 only) 717ifneq ($(CONFIG_STATIC_RELA),) 718# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base 719DO_STATIC_RELA = \ 720 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \ 721 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \ 722 tools/relocate-rela $(2) $(3) $$start $$end 723else 724DO_STATIC_RELA = 725endif 726 727# Always append ALL so that arch config.mk's can add custom ones 728ALL-y += u-boot.srec u-boot.bin System.map binary_size_check 729 730ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin 731ifeq ($(CONFIG_SPL_FSL_PBL),y) 732ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin 733else 734ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl 735endif 736ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin 737ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img 738ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin 739ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin 740ifeq ($(CONFIG_SPL_FRAMEWORK),y) 741ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img 742endif 743ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb 744ifneq ($(CONFIG_SPL_TARGET),) 745ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) 746endif 747ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf 748 749# enable combined SPL/u-boot/dtb rules for tegra 750ifneq ($(CONFIG_TEGRA),) 751ifeq ($(CONFIG_SPL),y) 752ifeq ($(CONFIG_OF_SEPARATE),y) 753ALL-y += u-boot-dtb-tegra.bin 754else 755ALL-y += u-boot-nodtb-tegra.bin 756endif 757endif 758endif 759 760# Add optional build target if defined in board/cpu/soc headers 761ifneq ($(CONFIG_BUILD_TARGET),) 762ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) 763endif 764 765LDFLAGS_u-boot += $(LDFLAGS_FINAL) 766ifneq ($(CONFIG_SYS_TEXT_BASE),) 767LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) 768endif 769 770quiet_cmd_objcopy = OBJCOPY $@ 771cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 772 773quiet_cmd_mkimage = MKIMAGE $@ 774cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ 775 $(if $(KBUILD_VERBOSE:1=), >/dev/null) 776 777quiet_cmd_cat = CAT $@ 778cmd_cat = cat $(filter-out $(PHONY), $^) > $@ 779 780append = cat $(filter-out $< $(PHONY), $^) >> $@ 781 782quiet_cmd_pad_cat = CAT $@ 783cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ 784 785all: $(ALL-y) 786ifneq ($(CONFIG_SYS_GENERIC_BOARD),y) 787 @echo "===================== WARNING ======================" 788 @echo "Please convert this board to generic board." 789 @echo "Otherwise it will be removed by the end of 2014." 790 @echo "See doc/README.generic-board for further information" 791 @echo "====================================================" 792endif 793 794PHONY += dtbs 795dtbs dts/dt.dtb: checkdtc u-boot 796 $(Q)$(MAKE) $(build)=dts dtbs 797 798u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE 799 $(call if_changed,cat) 800 801%.imx: %.bin 802 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 803 804quiet_cmd_copy = COPY $@ 805 cmd_copy = cp $< $@ 806 807u-boot.dtb: dts/dt.dtb 808 $(call cmd,copy) 809 810OBJCOPYFLAGS_u-boot.hex := -O ihex 811 812OBJCOPYFLAGS_u-boot.srec := -O srec 813 814u-boot.hex u-boot.srec: u-boot FORCE 815 $(call if_changed,objcopy) 816 817OBJCOPYFLAGS_u-boot.bin := -O binary 818 819binary_size_check: u-boot.bin FORCE 820 @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \ 821 map_size=$(shell cat u-boot.map | \ 822 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ 823 | sed 's/0X//g' \ 824 | bc); \ 825 if [ "" != "$$map_size" ]; then \ 826 if test $$map_size -ne $$file_size; then \ 827 echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ 828 echo " but u-boot.bin shows $$file_size" >&2 ; \ 829 exit 1; \ 830 fi \ 831 fi 832 833u-boot.bin: u-boot FORCE 834 $(call if_changed,objcopy) 835 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE)) 836 $(BOARD_SIZE_CHECK) 837 838u-boot.ldr: u-boot 839 $(CREATE_LDR_ENV) 840 $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) 841 $(BOARD_SIZE_CHECK) 842 843OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex 844 845OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec 846 847u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE 848 $(call if_changed,objcopy) 849 850# 851# U-Boot entry point, needed for booting of full-blown U-Boot 852# from the SPL U-Boot version. 853# 854ifndef CONFIG_SYS_UBOOT_START 855CONFIG_SYS_UBOOT_START := 0 856endif 857 858MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ 859 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ 860 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" 861 862MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ 863 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) 864 865MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 866 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage 867 868u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE 869 $(call if_changed,mkimage) 870 871MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) 872 873u-boot-dtb.img: u-boot-dtb.bin FORCE 874 $(call if_changed,mkimage) 875 876u-boot.sha1: u-boot.bin 877 tools/ubsha1 u-boot.bin 878 879u-boot.dis: u-boot 880 $(OBJDUMP) -d $< > $@ 881 882ifdef CONFIG_TPL 883SPL_PAYLOAD := tpl/u-boot-with-tpl.bin 884else 885SPL_PAYLOAD := u-boot.bin 886endif 887 888OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ 889 --pad-to=$(CONFIG_SPL_PAD_TO) 890u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE 891 $(call if_changed,pad_cat) 892 893OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \ 894 --pad-to=$(CONFIG_TPL_PAD_TO) 895tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE 896 $(call if_changed,pad_cat) 897 898SPL: spl/u-boot-spl.bin FORCE 899 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 900 901u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE 902 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@ 903 904MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE) 905 906u-boot.ubl: u-boot-with-spl.bin FORCE 907 $(call if_changed,mkimage) 908 909MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ 910 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \ 911 -T aisimage -e $(CONFIG_SPL_TEXT_BASE) 912spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE 913 $(call if_changed,mkimage) 914 915OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) 916u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE 917 $(call if_changed,pad_cat) 918 919u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin 920 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb 921u-boot.sb: u-boot.bin spl/u-boot-spl.bin 922 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb 923 924# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. 925# Both images are created using mkimage (crc etc), so that the ROM 926# bootloader can check its integrity. Padding needs to be done to the 927# SPL image (with mkimage header) and not the binary. Otherwise the resulting image 928# which is loaded/copied by the ROM bootloader to SRAM doesn't fit. 929# The resulting image containing both U-Boot images is called u-boot.spr 930MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ 931 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER 932spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE 933 $(call if_changed,mkimage) 934 935OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 936 --gap-fill=0xff 937u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE 938 $(call if_changed,pad_cat) 939 940MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \ 941 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL 942spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE 943 $(call if_changed,mkimage) 944 945OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 946 --gap-fill=0 947u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE 948 $(call if_changed,pad_cat) 949 950MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ 951 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot 952u-boot-nand.gph: u-boot.bin FORCE 953 $(call if_changed,mkimage) 954 @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ 955 956ifneq ($(CONFIG_SUNXI),) 957OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ 958 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff 959u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \ 960 u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE 961 $(call if_changed,pad_cat) 962endif 963 964ifneq ($(CONFIG_TEGRA),) 965OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE) 966u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE 967 $(call if_changed,pad_cat) 968 969ifeq ($(CONFIG_OF_SEPARATE),y) 970u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE 971 $(call if_changed,cat) 972endif 973endif 974 975u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE 976 $(call if_changed,cat) 977 978#Add a target to create boot binary having SPL binary in PBI format 979#concatenated with u-boot binary. It is need by PowerPC SoC having 980#internal SRAM <= 512KB. 981MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ 982 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage 983 984spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE 985 $(call if_changed,mkimage) 986 987OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ 988 --gap-fill=0xff 989 990u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE 991 $(call if_changed,pad_cat) 992 993# PPC4xx needs the SPL at the end of the image, since the reset vector 994# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target 995# and need to introduce a new build target with the full blown U-Boot 996# at the start padded up to the start of the SPL image. And then concat 997# the SPL image to the end. 998 999OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \ 1000 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff 1001u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE 1002 $(call if_changed,pad_cat) 1003 1004# Create a new ELF from a raw binary file. This is useful for arm64 1005# where static relocation needs to be performed on the raw binary, 1006# but certain simulators only accept an ELF file (but don't do the 1007# relocation). 1008# FIXME refactor dts/Makefile to share target/arch detection 1009u-boot.elf: u-boot.bin 1010 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \ 1011 $< u-boot-elf.o 1012 @$(LD) u-boot-elf.o -o $@ \ 1013 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \ 1014 -Ttext=$(CONFIG_SYS_TEXT_BASE) 1015 1016# Rule to link u-boot 1017# May be overridden by arch/$(ARCH)/config.mk 1018quiet_cmd_u-boot__ ?= LD $@ 1019 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \ 1020 -T u-boot.lds $(u-boot-init) \ 1021 --start-group $(u-boot-main) --end-group \ 1022 $(PLATFORM_LIBS) -Map u-boot.map 1023 1024quiet_cmd_smap = GEN common/system_map.o 1025cmd_smap = \ 1026 smap=`$(call SYSTEM_MAP,u-boot) | \ 1027 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ 1028 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ 1029 -c $(srctree)/common/system_map.c -o common/system_map.o 1030 1031u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds 1032 $(call if_changed,u-boot__) 1033ifeq ($(CONFIG_KALLSYMS),y) 1034 $(call cmd,smap) 1035 $(call cmd,u-boot__) common/system_map.o 1036endif 1037 1038# The actual objects are generated when descending, 1039# make sure no implicit rule kicks in 1040$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; 1041 1042# Handle descending into subdirectories listed in $(vmlinux-dirs) 1043# Preset locale variables to speed up the build process. Limit locale 1044# tweaks to this spot to avoid wrong language settings when running 1045# make menuconfig etc. 1046# Error messages still appears in the original language 1047 1048PHONY += $(u-boot-dirs) 1049$(u-boot-dirs): prepare scripts 1050 $(Q)$(MAKE) $(build)=$@ 1051 1052tools: prepare 1053# The "tools" are needed early 1054$(filter-out tools, $(u-boot-dirs)): tools 1055# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC 1056# is "yes"), so compile examples after U-Boot is compiled. 1057examples: $(filter-out examples, $(u-boot-dirs)) 1058 1059define filechk_uboot.release 1060 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1061endef 1062 1063# Store (new) UBOOTRELEASE string in include/config/uboot.release 1064include/config/uboot.release: include/config/auto.conf FORCE 1065 $(call filechk,uboot.release) 1066 1067 1068# Things we need to do before we recursively start building the kernel 1069# or the modules are listed in "prepare". 1070# A multi level approach is used. prepareN is processed before prepareN-1. 1071# archprepare is used in arch Makefiles and when processed asm symlink, 1072# version.h and scripts_basic is processed / created. 1073 1074# Listed in dependency order 1075PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 1076 1077# prepare3 is used to check if we are building in a separate output directory, 1078# and if so do: 1079# 1) Check that make has not been executed in the kernel src $(srctree) 1080prepare3: include/config/uboot.release 1081ifneq ($(KBUILD_SRC),) 1082 @$(kecho) ' Using $(srctree) as source for U-Boot' 1083 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ 1084 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ 1085 echo >&2 " in the '$(srctree)' directory.";\ 1086 /bin/false; \ 1087 fi; 1088endif 1089 1090# prepare2 creates a makefile if using a separate output directory 1091prepare2: prepare3 outputmakefile 1092 1093prepare1: prepare2 $(version_h) $(timestamp_h) \ 1094 include/config/auto.conf 1095ifeq ($(__HAVE_ARCH_GENERIC_BOARD),) 1096ifeq ($(CONFIG_SYS_GENERIC_BOARD),y) 1097 @echo >&2 " Your architecture does not support generic board." 1098 @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file." 1099 @/bin/false 1100endif 1101endif 1102ifeq ($(wildcard $(LDSCRIPT)),) 1103 @echo >&2 " Could not find linker script." 1104 @/bin/false 1105endif 1106 1107archprepare: prepare1 scripts_basic 1108 1109prepare0: archprepare FORCE 1110 $(Q)$(MAKE) $(build)=. 1111 1112# All the preparing.. 1113prepare: prepare0 1114 1115# Generate some files 1116# --------------------------------------------------------------------------- 1117 1118define filechk_version.h 1119 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \ 1120 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \ 1121 echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \ 1122 echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; ) 1123endef 1124 1125define filechk_timestamp.h 1126 (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \ 1127 LC_ALL=C date +'#define U_BOOT_TIME "%T"') 1128endef 1129 1130$(version_h): include/config/uboot.release FORCE 1131 $(call filechk,version.h) 1132 1133$(timestamp_h): $(srctree)/Makefile FORCE 1134 $(call filechk,timestamp.h) 1135 1136# --------------------------------------------------------------------------- 1137 1138PHONY += depend dep 1139depend dep: 1140 @echo '*** Warning: make $@ is unnecessary now.' 1141 1142# --------------------------------------------------------------------------- 1143quiet_cmd_cpp_lds = LDS $@ 1144cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ 1145 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $< 1146 1147u-boot.lds: $(LDSCRIPT) prepare FORCE 1148 $(call if_changed_dep,cpp_lds) 1149 1150spl/u-boot-spl.bin: spl/u-boot-spl 1151 @: 1152spl/u-boot-spl: tools prepare 1153 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all 1154 1155spl/sunxi-spl.bin: spl/u-boot-spl 1156 @: 1157 1158tpl/u-boot-tpl.bin: tools prepare 1159 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all 1160 1161TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) 1162 1163FIND := find 1164FINDFLAGS := -L 1165 1166tags ctags: 1167 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1168 -name '*.[chS]' -print` 1169 1170etags: 1171 etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ 1172 -name '*.[chS]' -print` 1173cscope: 1174 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ 1175 cscope.files 1176 cscope -b -q -k 1177 1178SYSTEM_MAP = \ 1179 $(NM) $1 | \ 1180 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ 1181 LC_ALL=C sort 1182System.map: u-boot 1183 @$(call SYSTEM_MAP,$<) > $@ 1184 1185checkdtc: 1186 @if test $(call dtc-version) -lt 0104; then \ 1187 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ 1188 false; \ 1189 fi 1190 1191######################################################################### 1192 1193# ARM relocations should all be R_ARM_RELATIVE (32-bit) or 1194# R_AARCH64_RELATIVE (64-bit). 1195checkarmreloc: u-boot 1196 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \ 1197 grep R_A | sort -u`"; \ 1198 if test "$$RELOC" != "R_ARM_RELATIVE" -a \ 1199 "$$RELOC" != "R_AARCH64_RELATIVE"; then \ 1200 echo "$< contains unexpected relocations: $$RELOC"; \ 1201 false; \ 1202 fi 1203 1204env: scripts_basic 1205 $(Q)$(MAKE) $(build)=tools/$@ 1206 1207tools-only: scripts_basic $(version_h) $(timestamp_h) 1208 $(Q)$(MAKE) $(build)=tools 1209 1210tools-all: export HOST_TOOLS_ALL=y 1211tools-all: env tools ; 1212 1213cross_tools: export CROSS_BUILD_TOOLS=y 1214cross_tools: tools ; 1215 1216.PHONY : CHANGELOG 1217CHANGELOG: 1218 git log --no-merges U-Boot-1_1_5.. | \ 1219 unexpand -a | sed -e 's/\s\s*$$//' > $@ 1220 1221include/license.h: tools/bin2header COPYING 1222 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h 1223######################################################################### 1224 1225### 1226# Cleaning is done on three levels. 1227# make clean Delete most generated files 1228# Leave enough to build external modules 1229# make mrproper Delete the current configuration, and all generated files 1230# make distclean Remove editor backup files, patch leftover files and the like 1231 1232# Directories & files removed with 'make clean' 1233CLEAN_DIRS += $(MODVERDIR) \ 1234 $(foreach d, spl tpl, $(patsubst %,$d/%, \ 1235 $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) 1236 1237CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ 1238 u-boot* MLO* SPL System.map 1239 1240# Directories & files removed with 'make mrproper' 1241MRPROPER_DIRS += include/config include/generated spl tpl \ 1242 .tmp_objdiff 1243MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ 1244 ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS 1245 1246# clean - Delete most, but leave enough to build external modules 1247# 1248clean: rm-dirs := $(CLEAN_DIRS) 1249clean: rm-files := $(CLEAN_FILES) 1250 1251clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f)) 1252 1253clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook) 1254 1255PHONY += $(clean-dirs) clean archclean 1256$(clean-dirs): 1257 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1258 1259# TODO: Do not use *.cfgtmp 1260clean: $(clean-dirs) 1261 $(call cmd,rmdirs) 1262 $(call cmd,rmfiles) 1263 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1264 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1265 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \ 1266 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1267 -o -name '*.symtypes' -o -name 'modules.order' \ 1268 -o -name modules.builtin -o -name '.tmp_*.o.*' \ 1269 -o -name '*.gcno' \) -type f -print | xargs rm -f 1270 1271# mrproper - Delete all generated files, including .config 1272# 1273mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) 1274mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1275mrproper-dirs := $(addprefix _mrproper_,scripts) 1276 1277PHONY += $(mrproper-dirs) mrproper archmrproper 1278$(mrproper-dirs): 1279 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1280 1281mrproper: clean $(mrproper-dirs) 1282 $(call cmd,rmdirs) 1283 $(call cmd,rmfiles) 1284 @rm -f arch/*/include/asm/arch 1285 1286# distclean 1287# 1288PHONY += distclean 1289 1290distclean: mrproper 1291 @find $(srctree) $(RCS_FIND_IGNORE) \ 1292 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1293 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ 1294 -o -name '.*.rej' -o -name '*%' -o -name 'core' \ 1295 -o -name '*.pyc' \) \ 1296 -type f -print | xargs rm -f 1297 @rm -f boards.cfg 1298 1299backup: 1300 F=`basename $(srctree)` ; cd .. ; \ 1301 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F 1302 1303help: 1304 @echo 'Cleaning targets:' 1305 @echo ' clean - Remove most generated files but keep the config' 1306 @echo ' mrproper - Remove all generated files + config + various backup files' 1307 @echo ' distclean - mrproper + remove editor backup and patch files' 1308 @echo '' 1309 @echo 'Configuration targets:' 1310 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1311 @echo '' 1312 @echo 'Other generic targets:' 1313 @echo ' all - Build all necessary images depending on configuration' 1314 @echo '* u-boot - Build the bare u-boot' 1315 @echo ' dir/ - Build all files in dir and below' 1316 @echo ' dir/file.[oisS] - Build specified target only' 1317 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1318 @echo ' (requires a recent binutils and recent build (System.map))' 1319 @echo ' tags/ctags - Generate ctags file for editors' 1320 @echo ' etags - Generate etags file for editors' 1321 @echo ' cscope - Generate cscope index' 1322 @echo ' ubootrelease - Output the release version string (use with make -s)' 1323 @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' 1324 @echo '' 1325 @echo 'Static analysers' 1326 @echo ' checkstack - Generate a list of stack hogs' 1327 @echo '' 1328 @echo 'Documentation targets:' 1329 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp 1330 @echo '' 1331 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1332 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1333 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1334 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' 1335 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1336 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1337 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' 1338 @echo ' 1: warnings which may be relevant and do not occur too often' 1339 @echo ' 2: warnings which occur quite often but may still be relevant' 1340 @echo ' 3: more obscure warnings, can most likely be ignored' 1341 @echo ' Multiple levels can be combined with W=12 or W=123' 1342 @echo '' 1343 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1344 @echo 'For further info see the ./README file' 1345 1346 1347# Documentation targets 1348# --------------------------------------------------------------------------- 1349%docs: scripts_basic FORCE 1350 $(Q)$(MAKE) $(build)=scripts build_docproc 1351 $(Q)$(MAKE) $(build)=doc/DocBook $@ 1352 1353# Dummies... 1354PHONY += prepare scripts 1355prepare: ; 1356scripts: ; 1357 1358endif #ifeq ($(config-targets),1) 1359endif #ifeq ($(mixed-targets),1) 1360 1361PHONY += checkstack ubootrelease ubootversion 1362 1363checkstack: 1364 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \ 1365 $(PERL) $(src)/scripts/checkstack.pl $(ARCH) 1366 1367ubootrelease: 1368 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1369 1370ubootversion: 1371 @echo $(UBOOTVERSION) 1372 1373# Single targets 1374# --------------------------------------------------------------------------- 1375# Single targets are compatible with: 1376# - build with mixed source and output 1377# - build with separate output dir 'make O=...' 1378# - external modules 1379# 1380# target-dir => where to store outputfile 1381# build-dir => directory in kernel source tree to use 1382 1383ifeq ($(KBUILD_EXTMOD),) 1384 build-dir = $(patsubst %/,%,$(dir $@)) 1385 target-dir = $(dir $@) 1386else 1387 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) 1388 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) 1389 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) 1390endif 1391 1392%.s: %.c prepare scripts FORCE 1393 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1394%.i: %.c prepare scripts FORCE 1395 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1396%.o: %.c prepare scripts FORCE 1397 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1398%.lst: %.c prepare scripts FORCE 1399 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1400%.s: %.S prepare scripts FORCE 1401 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1402%.o: %.S prepare scripts FORCE 1403 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1404%.symtypes: %.c prepare scripts FORCE 1405 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1406 1407# Modules 1408/: prepare scripts FORCE 1409 $(cmd_crmodverdir) 1410 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1411 $(build)=$(build-dir) 1412%/: prepare scripts FORCE 1413 $(cmd_crmodverdir) 1414 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1415 $(build)=$(build-dir) 1416%.ko: prepare scripts FORCE 1417 $(cmd_crmodverdir) 1418 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1419 $(build)=$(build-dir) $(@:.ko=.o) 1420 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1421 1422# FIXME Should go into a make.lib or something 1423# =========================================================================== 1424 1425quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) 1426 cmd_rmdirs = rm -rf $(rm-dirs) 1427 1428quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1429 cmd_rmfiles = rm -f $(rm-files) 1430 1431# read all saved command lines 1432 1433targets := $(wildcard $(sort $(targets))) 1434cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 1435 1436ifneq ($(cmd_files),) 1437 $(cmd_files): ; # Do not try to update included dependency files 1438 include $(cmd_files) 1439endif 1440 1441# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir 1442# Usage: 1443# $(Q)$(MAKE) $(clean)=dir 1444clean := -f $(srctree)/scripts/Makefile.clean obj 1445 1446endif # skip-makefile 1447 1448PHONY += FORCE 1449FORCE: 1450 1451# Declare the contents of the .PHONY variable as phony. We keep that 1452# information in a variable so we can use it in if_changed and friends. 1453.PHONY: $(PHONY) 1454