xref: /openbmc/u-boot/Makefile (revision 1e4e5ef0)

#
# (C) Copyright 2000-2010
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#

VERSION = 2010
PATCHLEVEL = 09
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
endif
TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
VERSION_FILE = $(obj)include/version_autogenerated.h

HOSTARCH := $(shell uname -m | \
	sed -e s/i.86/i386/ \
	    -e s/sun4u/sparc64/ \
	    -e s/arm.*/arm/ \
	    -e s/sa110/arm/ \
	    -e s/ppc64/powerpc/ \
	    -e s/ppc/powerpc/ \
	    -e s/macppc/powerpc/\
	    -e s/sh.*/sh/)

HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
	    sed -e 's/\(cygwin\).*/cygwin/')

# Set shell to bash if possible, otherwise fall back to sh
SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
	else if [ -x /bin/bash ]; then echo /bin/bash; \
	else echo sh; fi; fi)

export	HOSTARCH HOSTOS SHELL

# Deal with colliding definitions from tcsh etc.
VENDOR=

#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif

#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
# The second approach can also be used with a MAKEALL script
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#

ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endif

ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)

# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})

# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)

OBJTREE		:= $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SRCTREE		:= $(CURDIR)
TOPDIR		:= $(SRCTREE)
LNDIR		:= $(OBJTREE)
export	TOPDIR SRCTREE OBJTREE

MKCONFIG	:= $(SRCTREE)/mkconfig
export MKCONFIG

ifneq ($(OBJTREE),$(SRCTREE))
REMOTE_BUILD	:= 1
export REMOTE_BUILD
endif

# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src

# Make sure CDPATH settings don't interfere
unexport CDPATH

#########################################################################

# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS	= tools \
	  examples/standalone \
	  examples/api

.PHONY : $(SUBDIRS)

ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))

# Include autoconf.mk before config.mk so that the config options are available
# to all top level build files.  We need the dummy all: target to prevent the
# dependency target in autoconf.mk.dep from being the default.
all:
sinclude $(obj)include/autoconf.mk.dep
sinclude $(obj)include/autoconf.mk

# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export	ARCH CPU BOARD VENDOR SOC

# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE ?=
endif

# load other configuration
include $(TOPDIR)/config.mk

#########################################################################
# U-Boot objects....order is important (i.e. start must be first)

OBJS  = $(CPUDIR)/start.o
ifeq ($(CPU),i386)
OBJS += $(CPUDIR)/start16.o
OBJS += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += $(CPUDIR)/resetvec.o
endif
ifeq ($(CPU),mpc85xx)
OBJS += $(CPUDIR)/resetvec.o
endif

OBJS := $(addprefix $(obj),$(OBJS))

LIBS  = lib/libgeneric.a
LIBS += lib/lzma/liblzma.a
LIBS += lib/lzo/liblzo.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
	"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += $(CPUDIR)/lib$(CPU).a
ifdef SOC
LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).a
endif
ifeq ($(CPU),ixp)
LIBS += arch/arm/cpu/ixp/npe/libnpe.a
endif
LIBS += arch/$(ARCH)/lib/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
	fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
	fs/ubifs/libubifs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
LIBS += drivers/fpga/libfpga.a
LIBS += drivers/gpio/libgpio.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/misc/libmisc.a
LIBS += drivers/mmc/libmmc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/mtd/ubi/libubi.a
LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/phy/libphy.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
LIBS += drivers/power/libpower.a
LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc86xx)
LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a
LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += drivers/twserial/libtws.a
LIBS += drivers/usb/gadget/libusb_gadget.a
LIBS += drivers/usb/host/libusb_host.a
LIBS += drivers/usb/musb/libusb_musb.a
LIBS += drivers/usb/phy/libusb_phy.a
LIBS += drivers/video/libvideo.a
LIBS += drivers/watchdog/libwatchdog.a
LIBS += common/libcommon.a
LIBS += lib/libfdt/libfdt.a
LIBS += api/libapi.a
LIBS += post/libpost.a

ifeq ($(SOC),omap3)
LIBS += $(CPUDIR)/omap-common/libomap-common.a
endif
ifeq ($(SOC),omap4)
LIBS += $(CPUDIR)/omap-common/libomap-common.a
endif

ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.a
endif
ifeq ($(SOC),s5pc2xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.a
endif

LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)

LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
LIBBOARD := $(addprefix $(obj),$(LIBBOARD))

# Add GCC lib
ifdef USE_PRIVATE_LIBGCC
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = -L $(OBJTREE)/arch/$(ARCH)/lib -lgcc
else
PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
endif
else
PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
endif
PLATFORM_LIBS += $(PLATFORM_LIBGCC)
export PLATFORM_LIBS

# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
	-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
	$(shell $(LD) --version | \
	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')

ifeq ($(CONFIG_NAND_U_BOOT),y)
NAND_SPL = nand_spl
U_BOOT_NAND = $(obj)u-boot-nand.bin
endif

ifeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
endif

__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))

#########################################################################
#########################################################################

# Always append ALL so that arch config.mk's can add custom ones
ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)

all:		$(ALL)

$(obj)u-boot.hex:	$(obj)u-boot
		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@

$(obj)u-boot.srec:	$(obj)u-boot
		$(OBJCOPY) -O srec $< $@

$(obj)u-boot.bin:	$(obj)u-boot
		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@

$(obj)u-boot.ldr:	$(obj)u-boot
		$(CREATE_LDR_ENV)
		$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)

$(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary

$(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary

$(obj)u-boot.img:	$(obj)u-boot.bin
		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
		-a $(TEXT_BASE) -e 0 \
		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
		-d $< $@

$(obj)u-boot.imx:       $(obj)u-boot.bin
		$(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
		-e $(TEXT_BASE) -d $< $@

$(obj)u-boot.kwb:       $(obj)u-boot.bin
		$(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
		-a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@

$(obj)u-boot.sha1:	$(obj)u-boot.bin
		$(obj)tools/ubsha1 $(obj)u-boot.bin

$(obj)u-boot.dis:	$(obj)u-boot
		$(OBJDUMP) -d $< > $@

GEN_UBOOT = \
		UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
		sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
		cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
			-Map u-boot.map -o u-boot
$(obj)u-boot:	depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
		$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
		smap=`$(call SYSTEM_MAP,u-boot) | \
			awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
		$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
			-c common/system_map.c -o $(obj)common/system_map.o
		$(GEN_UBOOT) $(obj)common/system_map.o
endif

$(OBJS):	depend
		$(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))

$(LIBS):	depend $(SUBDIRS)
		$(MAKE) -C $(dir $(subst $(obj),,$@))

$(LIBBOARD):	depend $(LIBS)
		$(MAKE) -C $(dir $(subst $(obj),,$@))

$(SUBDIRS):	depend
		$(MAKE) -C $@ all

$(LDSCRIPT):	depend
		$(MAKE) -C $(dir $@) $(notdir $@)

$(obj)u-boot.lds: $(LDSCRIPT)
		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@

$(NAND_SPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
		$(MAKE) -C nand_spl/board/$(BOARDDIR) all

$(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin
		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin

$(ONENAND_IPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all

$(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin
		cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin

$(VERSION_FILE):
		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
		 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@

$(TIMESTAMP_FILE):
		@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
		@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@

gdbtools:
		$(MAKE) -C tools/gdb all || exit 1

updater:
		$(MAKE) -C tools/updater all || exit 1

env:
		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1

# Explicitly make _depend in subdirs containing multiple targets to prevent
# parallel sub-makes creating .depend files simultaneously.
depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
		for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \
			$(MAKE) -C $$dir _depend ; done

TAG_SUBDIRS = $(SUBDIRS)
TAG_SUBDIRS += $(dir $(__LIBS))
TAG_SUBDIRS += include

tags ctags:
		ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
						-name '*.[chS]' -print`

etags:
		etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
						-name '*.[chS]' -print`
cscope:
		find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files
		cscope -b -q -k

SYSTEM_MAP = \
		$(NM) $1 | \
		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
		LC_ALL=C sort
$(obj)System.map:	$(obj)u-boot
		@$(call SYSTEM_MAP,$<) > $(obj)System.map

#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
	@$(XECHO) Generating $@ ; \
	set -e ; \
	: Generate the dependancies ; \
	$(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
		-MQ $(obj)include/autoconf.mk include/common.h > $@

$(obj)include/autoconf.mk: $(obj)include/config.h
	@$(XECHO) Generating $@ ; \
	set -e ; \
	: Extract the config macros ; \
	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
	mv $@.tmp $@

#########################################################################
else	# !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \
updater env depend dep tags ctags etags cscope $(obj)System.map:
	@echo "System not configured - see README" >&2
	@ exit 1

tools:
	$(MAKE) -C tools
tools-all:
	$(MAKE) -C tools HOST_TOOLS_ALL=y
endif	# config.mk

.PHONY : CHANGELOG
CHANGELOG:
	git log --no-merges U-Boot-1_1_5.. | \
	unexpand -a | sed -e 's/\s\s*$$//' > $@

include/license.h: tools/bin2header COPYING
	cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
#########################################################################

unconfig:
	@rm -f $(obj)include/config.h $(obj)include/config.mk \
		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep

%_config::	unconfig
	@$(MKCONFIG) -A $(@:_config=)

##%: %_config
##	$(MAKE)

#
# Functions to generate common board directory names
#
lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')

#========================================================================
# PowerPC
#========================================================================

#########################################################################
## MPC5xxx Systems
#########################################################################

digsy_mtc_config \
digsy_mtc_LOWBOOT_config	\
digsy_mtc_RAMBOOT_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/digsy_mtc
	@ >$(obj)include/config.h
	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
		echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
		echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
	@$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc

galaxy5200_LOWBOOT_config \
galaxy5200_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200

Lite5200_config				\
Lite5200_LOWBOOT_config			\
Lite5200_LOWBOOT08_config		\
icecube_5200_config			\
icecube_5200_LOWBOOT_config		\
icecube_5200_LOWBOOT08_config		\
icecube_5200_DDR_config			\
icecube_5200_DDR_LOWBOOT_config		\
icecube_5200_DDR_LOWBOOT08_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/icecube
	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
		if [ "$(findstring DDR,$@)" ] ; \
			then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
			else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
		fi
	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
		echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
	@[ -z "$(findstring DDR,$@)" ] || \
		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube

lite5200b_config	\
lite5200b_PM_config	\
lite5200b_LOWBOOT_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/icecube
	@ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h
	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
	@[ -z "$(findstring _PM_,$@)" ] || \
		echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
		echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
	@$(MKCONFIG) -n $@ -a IceCube  powerpc mpc5xxx icecube

mcc200_config	\
mcc200_SDRAM_config	\
mcc200_highboot_config	\
mcc200_COM12_config	\
mcc200_COM12_SDRAM_config	\
mcc200_COM12_highboot_config	\
mcc200_COM12_highboot_SDRAM_config	\
mcc200_highboot_SDRAM_config	\
prs200_config	\
prs200_DDR_config	\
prs200_highboot_config	\
prs200_highboot_DDR_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/mcc200
	@[ -z "$(findstring highboot,$@)" ] || \
		echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
	@[ -n "$(findstring _SDRAM,$@)" ] || \
		if [ -n "$(findstring prs200,$@)" ]; \
		then \
			if [ -z "$(findstring _DDR,$@)" ];\
			then \
				echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
			fi; \
		fi
	@[ -z "$(findstring _SDRAM,$@)" ] || \
		echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h
	@[ -z "$(findstring COM12,$@)" ] || \
		echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h
	@[ -z "$(findstring prs200,$@)" ] || \
		echo "#define CONFIG_PRS200" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200

MVBC_P_config: unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/mvbc_p
	@ >$(obj)include/config.h
	@[ -z "$(findstring MVBC_P,$@)" ] || \
		echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision

MVSMR_config: unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/matrix_vision/mvsmr
	@$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision

pcm030_config \
pcm030_LOWBOOT_config:	unconfig
	@mkdir -p $(obj)include $(obj)board/phytec/pcm030
	@ >$(obj)include/config.h
	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
		echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
	@$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec

PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring DDR,$@)" ] || \
		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
	@[ -z "$(findstring ROMBOOT,$@)" ] || \
		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520

TB5200_B_config \
TB5200_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _B,$@)" ] || \
		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc

MINI5200_config	\
EVAL5200_config	\
TOP5200_config:	unconfig
	@mkdir -p $(obj)include
	@ echo "#define CONFIG_$(@:_config=) 1"	>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk

Total5200_config		\
Total5200_lowboot_config	\
Total5200_Rev2_config		\
Total5200_Rev2_lowboot_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/total5200
	@[ -n "$(findstring Rev,$@)" ] || \
		echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h
	@[ -z "$(findstring Rev2_,$@)" ] || \
		echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
	@[ -z "$(findstring lowboot_,$@)" ] || \
		echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
	@$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200

cam5200_config \
cam5200_niosflash_config \
fo300_config \
MiniFAP_config \
TQM5200S_config \
TQM5200S_HIGHBOOT_config \
TQM5200_B_config \
TQM5200_B_HIGHBOOT_config \
TQM5200_config	\
TQM5200_STK100_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/tqc/tqm5200
	@[ -z "$(findstring cam5200,$@)" ] || \
		{ echo "#define CONFIG_CAM5200"	  >>$(obj)include/config.h ; \
		  echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
		}
	@[ -z "$(findstring niosflash,$@)" ] || \
		echo "#define CONFIG_CAM5200_NIOSFLASH"	>>$(obj)include/config.h
	@[ -z "$(findstring fo300,$@)" ] || \
		echo "#define CONFIG_FO300" >>$(obj)include/config.h
	@[ -z "$(findstring MiniFAP,$@)" ] || \
		echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h
	@[ -z "$(findstring STK100,$@)" ] || \
		echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h
	@[ -z "$(findstring TQM5200_B,$@)" ] || \
		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
	@[ -z "$(findstring TQM5200S,$@)" ] || \
		{ echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
		}
	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
		echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
	@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc

#########################################################################
## MPC512x Systems
#########################################################################

mpc5121ads_config \
mpc5121ads_rev2_config	\
	: unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring rev2,$@)" ] ; then \
		echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
	fi
	@$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale

#########################################################################
## MPC8xx Systems
#########################################################################

Adder87x_config \
AdderII_config	\
AdderUSB_config	\
Adder_config	\
	:		unconfig
	@mkdir -p $(obj)include
	$(if $(findstring AdderII,$@), \
		@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
	@$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder

ADS860_config	  \
FADS823_config	  \
FADS850SAR_config \
MPC86xADS_config  \
MPC885ADS_config  \
FADS860T_config:	unconfig
	@$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads

GEN860T_SC_config	\
GEN860T_config: unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _SC,$@)" ] || \
		echo "#define CONFIG_SC" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t

ICU862_100MHz_config	\
ICU862_config: unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _100MHz,$@)" ] || \
		echo "#define CONFIG_100MHz" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862

IVML24_256_config \
IVML24_128_config \
IVML24_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring IVML24_config,$@)" ] || \
		echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h
	@[ -z "$(findstring IVML24_128_config,$@)" ] || \
		echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h
	@[ -z "$(findstring IVML24_256_config,$@)" ] || \
		echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm

IVMS8_256_config \
IVMS8_128_config \
IVMS8_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring IVMS8_config,$@)" ] || \
		echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h
	@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
		echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h
	@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
		echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm

MBX_config	\
MBX860T_config:	unconfig
	@$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx

NETVIA_V2_config \
NETVIA_config:		unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring NETVIA_config,$@)" ] || \
		echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h
	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
		echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia

NETPHONE_V2_config \
NETPHONE_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring NETPHONE_config,$@)" ] || \
		echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h
	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
		echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone

NETTA_ISDN_6412_SWAPHOOK_config \
NETTA_ISDN_SWAPHOOK_config \
NETTA_6412_SWAPHOOK_config \
NETTA_SWAPHOOK_config \
NETTA_ISDN_6412_config \
NETTA_ISDN_config \
NETTA_6412_config \
NETTA_config:		unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring ISDN_,$@)" ] || \
		echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h
	@[ -n "$(findstring ISDN_,$@)" ] || \
		echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h
	@[ -z "$(findstring 6412_,$@)" ] || \
		echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h
	@[ -n "$(findstring 6412_,$@)" ] || \
		echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h
	@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
		echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h
	@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
		echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta

NETTA2_V2_config \
NETTA2_config:		unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring NETTA2_config,$@)" ] || \
		echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h
	@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
		echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2

NC650_Rev1_config \
NC650_Rev2_config \
CP850_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring CP850,$@)" ] || \
		{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
		  echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
		}
	@[ -z "$(findstring Rev1,$@)" ] || \
		{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
		}
	@[ -z "$(findstring Rev2,$@)" ] || \
		{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
		}
	@$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650

RPXlite_DW_64_config		\
RPXlite_DW_LCD_config		\
RPXlite_DW_64_LCD_config	\
RPXlite_DW_NVRAM_config		\
RPXlite_DW_NVRAM_64_config	\
RPXlite_DW_NVRAM_LCD_config	\
RPXlite_DW_NVRAM_64_LCD_config	\
RPXlite_DW_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _64,$@)" ] || \
		echo "#define RPXlite_64MHz"		>>$(obj)include/config.h
	@[ -z "$(findstring _LCD,$@)" ] || \
		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
		}
	@[ -z "$(findstring _NVRAM,$@)" ] || \
		echo "#define  CONFIG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw

RRvision_LCD_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_LCD" >$(obj)include/config.h
	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
	@$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision

SPD823TS_config:	unconfig
	@$(MKCONFIG) $@ powerpc mpc8xx spd8xx

SXNI855T_config:	unconfig
	@$(MKCONFIG) $@ powerpc mpc8xx sixnet

# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
# and only 823 boards may have LCD support
xtract_8xx = $(subst _LCD,,$1)

FPS850L_config		\
FPS860L_config		\
NSCU_config		\
TQM823L_config		\
TQM823L_LCD_config	\
TQM850L_config		\
TQM855L_config		\
TQM860L_config		\
TQM862L_config		\
TQM823M_config		\
TQM850M_config		\
TQM855M_config		\
TQM860M_config		\
TQM862M_config		\
TQM866M_config		\
TQM885D_config		\
TK885D_config		\
virtlab2_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _LCD,$@)" ] || \
		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
		}
	@$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc

TTTech_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_LCD" >$(obj)include/config.h
	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
	@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc

v37_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_LCD" >$(obj)include/config.h
	@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
	@$(MKCONFIG) $@ powerpc mpc8xx v37

wtk_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_LCD" >$(obj)include/config.h
	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
	@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc

#########################################################################
## PPC4xx Systems
#########################################################################

acadia_nand_config:	unconfig
	@mkdir -p $(obj)include $(obj)board/amcc/acadia
	@mkdir -p $(obj)nand_spl/board/amcc/acadia
	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc

bamboo_nand_config:	unconfig
	@mkdir -p $(obj)include $(obj)board/amcc/bamboo
	@mkdir -p $(obj)nand_spl/board/amcc/bamboo
	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc

# Arches, Canyonlands & Glacier use different U-Boot images
arches_config \
canyonlands_config \
glacier_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc

canyonlands_nand_config \
glacier_nand_config:	unconfig
	@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
	@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc

CATcenter_config	\
CATcenter_25_config	\
CATcenter_33_config:	unconfig
	@mkdir -p $(obj)include
	@echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
	@echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
	@[ -z "$(findstring _25,$@)" ] || \
		echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h
	@[ -z "$(findstring _33,$@)" ] || \
		echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h
	@$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave

CPCI405_config		\
CPCI4052_config		\
CPCI405DT_config	\
CPCI405AB_config:	unconfig
	@mkdir -p $(obj)board/esd/cpci405
	@$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd

fx12mm_flash_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
		> $(obj)board/avnet/fx12mm/config.tmp
	@echo "TEXT_BASE := 0xFFCB0000" \
		>> $(obj)board/avnet/fx12mm/config.tmp
	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet

fx12mm_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
		> $(obj)board/avnet/fx12mm/config.tmp
	@echo "TEXT_BASE := 0x03000000" \
		>> $(obj)board/avnet/fx12mm/config.tmp
	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet

# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
intip_config \
devconcenter_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys

hcu4_config    \
hcu5_config    \
mcu25_config:  unconfig
	@mkdir -p $(obj)board/netstal/common
	@$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal

# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
	@$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc

kilauea_nand_config \
haleakala_nand_config: unconfig
	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc

MIP405T_config:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
	@$(XECHO) "Enable subset config for MIP405T"
	@$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl

ml507_flash_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
		> $(obj)board/xilinx/ml507/config.tmp
	@echo "TEXT_BASE := 0xFE360000" \
		>> $(obj)board/xilinx/ml507/config.tmp
	@$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx

ml507_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
		> $(obj)board/xilinx/ml507/config.tmp
	@echo "TEXT_BASE := 0x04000000"  \
		>> $(obj)board/xilinx/ml507/config.tmp
	@$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx

OCRTC_config		\
ORSG_config:	unconfig
	@$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd

PPChameleonEVB_config		\
PPChameleonEVB_BA_25_config	\
PPChameleonEVB_ME_25_config	\
PPChameleonEVB_HI_25_config	\
PPChameleonEVB_BA_33_config	\
PPChameleonEVB_ME_33_config	\
PPChameleonEVB_HI_33_config:	unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring EVB_BA,$@)" ] || \
		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h
	@[ -z "$(findstring EVB_ME,$@)" ] || \
		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h
	@[ -z "$(findstring EVB_HI,$@)" ] || \
		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h
	@[ -z "$(findstring _25,$@)" ] || \
		echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h
	@[ -z "$(findstring _33,$@)" ] || \
		echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave

sequoia_config \
rainier_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc

sequoia_nand_config \
rainier_nand_config: unconfig
	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
	@mkdir -p $(obj)nand_spl/board/amcc/sequoia
	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc

sequoia_ramboot_config \
rainier_ramboot_config: unconfig
	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
	@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
	@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
		$(obj)board/amcc/sequoia/config.tmp
	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc

v5fx30teval_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
		> $(obj)board/avnet/v5fx30teval/config.tmp
	@echo "TEXT_BASE := 0x03000000" \
		>> $(obj)board/avnet/v5fx30teval/config.tmp
	@$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet

v5fx30teval_flash_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
		> $(obj)board/avnet/v5fx30teval/config.tmp
	@echo "TEXT_BASE := 0xFF1C0000" \
		>> $(obj)board/avnet/v5fx30teval/config.tmp
	@$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet

W7OLMC_config	\
W7OLMG_config: unconfig
	@$(MKCONFIG) $@ powerpc ppc4xx w7o

# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
	@$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc

xilinx-ppc405-generic_flash_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
		> $(obj)board/xilinx/ppc405-generic/config.tmp
	@echo "TEXT_BASE := 0xFE360000" \
		>> $(obj)board/xilinx/ppc405-generic/config.tmp
	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx

xilinx-ppc405-generic_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
		> $(obj)board/xilinx/ppc405-generic/config.tmp
	@echo "TEXT_BASE := 0x04000000" \
		>> $(obj)board/xilinx/ppc405-generic/config.tmp
	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx

xilinx-ppc440-generic_flash_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
		> $(obj)board/xilinx/ppc440-generic/config.tmp
	@echo "TEXT_BASE := 0xFE360000" \
		>> $(obj)board/xilinx/ppc440-generic/config.tmp
	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx

xilinx-ppc440-generic_config: unconfig
	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
		> $(obj)board/xilinx/ppc440-generic/config.tmp
	@echo "TEXT_BASE := 0x04000000" \
		>> $(obj)board/xilinx/ppc440-generic/config.tmp
	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx

yosemite_config \
yellowstone_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc

#########################################################################
## MPC824x Systems
#########################################################################

eXalion_config: unconfig
	@$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion

CPC45_config	\
CPC45_ROMBOOT_config:	unconfig
	@mkdir -p $(obj)include ;				\
	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
	else \
		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
	fi; \
	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
	@$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45

# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
# time permits.
#linkstation_HDLAN_config \
# Remove this line when HDLAN is fixed
linkstation_HGLAN_config: unconfig
	@mkdir -p $(obj)include
	@case $@ in \
		*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
		*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
	esac
	@$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation

Sandpoint8240_config: unconfig
	@$(MKCONFIG) $@ powerpc mpc824x sandpoint

Sandpoint8245_config: unconfig
	@$(MKCONFIG) $@ powerpc mpc824x sandpoint

#########################################################################
## MPC8260 Systems
#########################################################################

cogent_mpc8260_config:	unconfig
	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent

CPU86_config	\
CPU86_ROMBOOT_config: unconfig
	@mkdir -p  $(obj)include ;				\
	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
	else \
		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
	fi; \
	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
	@$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86

CPU87_config	\
CPU87_ROMBOOT_config: unconfig
	@mkdir -p $(obj)include ;				\
	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
	else \
		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
	fi; \
	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
	@$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87

ep8248_config	\
ep8248E_config	:	unconfig
	@$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248

ISPAN_config		\
ISPAN_REVB_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _REVB_,$@)" ] ; then \
		echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan

MPC8260ADS_config	\
MPC8260ADS_lowboot_config	\
MPC8260ADS_33MHz_config	\
MPC8260ADS_33MHz_lowboot_config	\
MPC8260ADS_40MHz_config	\
MPC8260ADS_40MHz_lowboot_config	\
MPC8272ADS_config	\
MPC8272ADS_lowboot_config	\
PQ2FADS_config		\
PQ2FADS_lowboot_config		\
PQ2FADS-VR_config	\
PQ2FADS-VR_lowboot_config	\
PQ2FADS-ZU_config	\
PQ2FADS-ZU_lowboot_config	\
PQ2FADS-ZU_66MHz_config	\
PQ2FADS-ZU_66MHz_lowboot_config	\
	:		unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/freescale/mpc8260ads
	$(if $(findstring PQ2FADS,$@), \
	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
	$(if $(findstring MHz,$@), \
	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
	$(if $(findstring VR,$@), \
	@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
	@[ -z "$(findstring lowboot_,$@)" ] || \
		echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
	@$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale

muas3001_dev_config \
muas3001_config	:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/muas3001
	@if [ "$(findstring dev,$@)" ] ; then \
		echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001

# PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
PM825_config	\
PM825_ROMBOOT_config	\
PM825_BIGFLASH_config	\
PM825_ROMBOOT_BIGFLASH_config	\
PM826_config	\
PM826_ROMBOOT_config	\
PM826_BIGFLASH_config	\
PM826_ROMBOOT_BIGFLASH_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/pm826
	@if [ "$(findstring PM825_,$@)" ] ; then \
		echo "#define CONFIG_PCI"	>$(obj)include/config.h ; \
	else \
		>$(obj)include/config.h ; \
	fi
	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
		fi; \
	else \
		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
			$(XECHO) "... with 32 MB Flash" ; \
			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
			echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
		else \
			echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
		fi; \
	fi
	@$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826

PM828_config	\
PM828_PCI_config	\
PM828_ROMBOOT_config	\
PM828_ROMBOOT_PCI_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/pm826
	@if [ "$(findstring _PCI_,$@)" ] ; then \
		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
	fi
	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
		echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
	fi
	@$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828

Rattler8248_config	\
Rattler_config:		unconfig
	@mkdir -p $(obj)include
	$(if $(findstring 8248,$@), \
		@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
	@$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler

TQM8255_AA_config \
TQM8260_AA_config \
TQM8260_AB_config \
TQM8260_AC_config \
TQM8260_AD_config \
TQM8260_AE_config \
TQM8260_AF_config \
TQM8260_AG_config \
TQM8260_AH_config \
TQM8260_AI_config \
TQM8265_AA_config:  unconfig
	@mkdir -p $(obj)include
	@case "$@" in \
	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;	BMODE=8260;;  \
	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;	BMODE=8260;; \
	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;	BMODE=8260;; \
	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=8260;; \
	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes;	BMODE=60x;;  \
	TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;	BMODE=60x;;  \
	esac; \
	if [ "$${CTYPE}" != "MPC8260" ] ; then \
		echo "#define CONFIG_$${CTYPE}"	>>$(obj)include/config.h ; \
	fi; \
	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
	if [ "$${CACHE}" = "yes" ] ; then \
		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
	else \
		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
	fi; \
	if [ "$${BMODE}" = "60x" ] ; then \
		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
	else \
		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc

VoVPN-GW_66MHz_config	\
VoVPN-GW_100MHz_config:		unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
	@$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk

#########################################################################
## Coldfire
#########################################################################

astro_mcf5373l_config \
astro_mcf5373l_RAM_config :	unconfig
	@$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro

M52277EVB_config \
M52277EVB_spansion_config \
M52277EVB_stmicro_config :	unconfig
	@case "$@" in \
	M52277EVB_config)		FLASH=SPANSION;; \
	M52277EVB_spansion_config)	FLASH=SPANSION;; \
	M52277EVB_stmicro_config)	FLASH=STMICRO;; \
	esac; \
	if [ "$${FLASH}" = "SPANSION" ] ; then \
		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
		cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
	fi; \
	if [ "$${FLASH}" = "STMICRO" ] ; then \
		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
		cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
	fi
	@$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale

M5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config:	unconfig
	@case "$@" in \
	M5235EVB_config)		FLASH=16;; \
	M5235EVB_Flash16_config)	FLASH=16;; \
	M5235EVB_Flash32_config)	FLASH=32;; \
	esac; \
	if [ "$${FLASH}" != "16" ] ; then \
		echo "#define NORFLASH_PS32BIT	1" >> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
		cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
	else \
		echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
		cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
	fi
	@$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale

cobra5272_config :		unconfig
	@$(MKCONFIG) $@ m68k mcf52x2 cobra5272

EB+MCF-EV123_config :		unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
	@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS

EB+MCF-EV123_internal_config :	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
	@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS

M5329AFEE_config \
M5329BFEE_config :	unconfig
	@case "$@" in \
	M5329AFEE_config)	NAND=0;; \
	M5329BFEE_config)	NAND=16;; \
	esac; \
	if [ "$${NAND}" != "0" ] ; then \
		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale

M5373EVB_config :	unconfig
	@case "$@" in \
	M5373EVB_config)	NAND=16;; \
	esac; \
	if [ "$${NAND}" != "0" ] ; then \
		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale

M54451EVB_config \
M54451EVB_stmicro_config :	unconfig
	@case "$@" in \
	M54451EVB_config)		FLASH=NOR;; \
	M54451EVB_stmicro_config)	FLASH=STMICRO;; \
	esac; \
	if [ "$${FLASH}" = "NOR" ] ; then \
		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
		cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
	fi; \
	if [ "$${FLASH}" = "STMICRO" ] ; then \
		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
		cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
	fi; \
	echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
	@$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale

M54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
M54455EVB_a33_config \
M54455EVB_a66_config \
M54455EVB_i33_config \
M54455EVB_i66_config \
M54455EVB_stm33_config :	unconfig
	@case "$@" in \
	M54455EVB_config)		FLASH=ATMEL; FREQ=33333333;; \
	M54455EVB_atmel_config)		FLASH=ATMEL; FREQ=33333333;; \
	M54455EVB_intel_config)		FLASH=INTEL; FREQ=33333333;; \
	M54455EVB_a33_config)		FLASH=ATMEL; FREQ=33333333;; \
	M54455EVB_a66_config)		FLASH=ATMEL; FREQ=66666666;; \
	M54455EVB_i33_config)		FLASH=INTEL; FREQ=33333333;; \
	M54455EVB_i66_config)		FLASH=INTEL; FREQ=66666666;; \
	M54455EVB_stm33_config)		FLASH=STMICRO; FREQ=33333333;; \
	esac; \
	if [ "$${FLASH}" = "INTEL" ] ; then \
		echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
	fi; \
	if [ "$${FLASH}" = "ATMEL" ] ; then \
		echo "#define CONFIG_SYS_ATMEL_BOOT"	>> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
	fi; \
	if [ "$${FLASH}" = "STMICRO" ] ; then \
		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
		cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
	fi; \
	echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
	@$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale

M5475AFE_config \
M5475BFE_config \
M5475CFE_config \
M5475DFE_config \
M5475EFE_config \
M5475FFE_config \
M5475GFE_config :	unconfig
	@case "$@" in \
	M5475AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
	M5475BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
	M5475CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
	M5475DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
	M5475EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
	M5475FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
	M5475GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
	esac; \
	echo "#define CONFIG_SYS_BUSCLK	133333333" > $(obj)include/config.h ; \
	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
	if [ "$${RAM1}" != "0" ] ; then \
		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
	fi; \
	if [ "$${CODE}" != "0" ] ; then \
		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
	fi; \
	if [ "$${VID}" == "1" ] ; then \
		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
	fi; \
	if [ "$${USB}" == "1" ] ; then \
		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale

M5485AFE_config \
M5485BFE_config \
M5485CFE_config \
M5485DFE_config \
M5485EFE_config \
M5485FFE_config \
M5485GFE_config \
M5485HFE_config :	unconfig
	@case "$@" in \
	M5485AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
	M5485BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
	M5485CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
	M5485DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
	M5485EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
	M5485FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
	M5485GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
	M5485HFE_config)	BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
	esac; \
	echo "#define CONFIG_SYS_BUSCLK	100000000" > $(obj)include/config.h ; \
	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
	if [ "$${RAM1}" != "0" ] ; then \
		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
	fi; \
	if [ "$${CODE}" != "0" ] ; then \
		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
	fi; \
	if [ "$${VID}" == "1" ] ; then \
		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
	fi; \
	if [ "$${USB}" == "1" ] ; then \
		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale

#########################################################################
## MPC83xx Systems
#########################################################################

MPC8313ERDB_33_config \
MPC8313ERDB_66_config \
MPC8313ERDB_NAND_33_config \
MPC8313ERDB_NAND_66_config: unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/freescale/mpc8313erdb
	@if [ "$(findstring _33_,$@)" ] ; then \
		echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _66_,$@)" ] ; then \
		echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _NAND_,$@)" ] ; then \
		echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
	fi ;
	@if [ "$(findstring _NAND_,$@)" ] ; then \
		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
	fi ;
	@$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale

MPC8315ERDB_NAND_config \
MPC8315ERDB_config: unconfig
	@$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale

MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config \
MPC832XEMDS_ATM_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _HOST_,$@)" ] ; then \
		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _SLAVE_,$@)" ] ; then \
		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _33_,$@)" ] ; then \
		echo "#define PCI_33M" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _66_,$@)" ] ; then \
		echo "#define PCI_66M" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _ATM_,$@)" ] ; then \
		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
	fi ;
	@$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale

MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
MPC8349ITXGP_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/freescale/mpc8349itx
	@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
	@if [ "$(findstring GP,$@)" ] ; then \
		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
	fi
	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
		echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
	fi
	@$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale

MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config \
MPC8360EMDS_ATM_config: unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _HOST_,$@)" ] ; then \
		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _SLAVE_,$@)" ] ; then \
		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _33_,$@)" ] ; then \
		echo "#define PCI_33M" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _66_,$@)" ] ; then \
		echo "#define PCI_66M" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _ATM_,$@)" ] ; then \
		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
	fi ;
	@$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale

MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
MPC8360ERDK_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _33_,$@)" ] ; then \
		echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
	fi ;
	@$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale

MPC837XEMDS_config \
MPC837XEMDS_HOST_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _HOST_,$@)" ] ; then \
		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
	fi ;
	@$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale

sbc8349_config \
sbc8349_PCI_33_config \
sbc8349_PCI_66_config: unconfig
	@$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349

SIMPC8313_LP_config \
SIMPC8313_SP_config: unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/sheldon/simpc8313
	@if [ "$(findstring _LP_,$@)" ] ; then \
		echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _SP_,$@)" ] ; then \
		echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
	fi ;
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon

caddy2_config \
vme8349_config:		unconfig
	@$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd

#########################################################################
## MPC85xx Systems
#########################################################################

MPC8536DS_NAND_config \
MPC8536DS_SDCARD_config \
MPC8536DS_SPIFLASH_config \
MPC8536DS_36BIT_config \
MPC8536DS_config:       unconfig
	@$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale

MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config:	unconfig
	@mkdir -p $(obj)include
	@if [ -z "$(findstring _33_,$@)" ] ; then \
		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
	fi ; \
	if [ "$(findstring _slave_,$@)" ] ; then \
		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval

MPC8541CDS_legacy_config \
MPC8541CDS_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _legacy_,$@)" ] ; then \
		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale

MPC8548CDS_legacy_config \
MPC8548CDS_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _legacy_,$@)" ] ; then \
		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale

MPC8555CDS_legacy_config \
MPC8555CDS_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _legacy_,$@)" ] ; then \
		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale

MPC8569MDS_ATM_config \
MPC8569MDS_NAND_config \
MPC8569MDS_config:	unconfig
	@$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale

MPC8572DS_36BIT_config \
MPC8572DS_config:       unconfig
	@$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale

P2020DS_36BIT_config \
P2020DS_config:		unconfig
	@$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale

P1011RDB_config	\
P1011RDB_NAND_config \
P1011RDB_SDCARD_config \
P1011RDB_SPIFLASH_config \
P1020RDB_config	\
P1020RDB_NAND_config \
P1020RDB_SDCARD_config \
P1020RDB_SPIFLASH_config \
P2010RDB_config \
P2010RDB_NAND_config \
P2010RDB_SDCARD_config \
P2010RDB_SPIFLASH_config \
P2020DS_DDR2_config \
P2020RDB_config \
P2020RDB_NAND_config \
P2020RDB_SDCARD_config \
P2020RDB_SPIFLASH_config:	unconfig
	@$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale

sbc8540_config \
sbc8540_33_config \
sbc8540_66_config:	unconfig
	@$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560

sbc8548_config \
sbc8548_PCI_33_config \
sbc8548_PCI_66_config \
sbc8548_PCI_33_PCIE_config \
sbc8548_PCI_66_PCIE_config: unconfig
	@$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548

sbc8560_config \
sbc8560_33_config \
sbc8560_66_config:	unconfig
	@$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560

stxssa_config		\
stxssa_4M_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _4M_,$@)" ] ; then \
		echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx

TQM8540_config		\
TQM8541_config		\
TQM8548_config		\
TQM8548_AG_config	\
TQM8548_BE_config	\
TQM8555_config		\
TQM8560_config:		unconfig
	@mkdir -p $(obj)include
	@BTYPE=$(@:_config=); \
	CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
	echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
	echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
	echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
	@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
	@$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc

#########################################################################
## MPC86xx Systems
#########################################################################

MPC8641HPCN_36BIT_config \
MPC8641HPCN_config:    unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _36BIT_,$@)" ] ; then \
		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale

#########################################################################
## 74xx/7xx Systems
#########################################################################

EVB64260_config	\
EVB64260_750CX_config:	unconfig
	@$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260

p3m750_config	\
p3m7448_config:		unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring 750_,$@)" ] ; then \
		echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive

PCIPPC2_config \
PCIPPC6_config: unconfig
	@$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2

#========================================================================
# ARM
#========================================================================

#########################################################################
## Atmel AT91RM9200 Systems
#########################################################################

CPUAT91_RAM_config \
CPUAT91_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$(@:_config=) 1"	>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91

#########################################################################
## ARM926EJ-S Systems
#########################################################################

at91sam9260ek_nandflash_config \
at91sam9260ek_dataflash_cs0_config \
at91sam9260ek_dataflash_cs1_config \
at91sam9260ek_config \
at91sam9g20ek_nandflash_config \
at91sam9g20ek_dataflash_cs0_config \
at91sam9g20ek_dataflash_cs1_config \
at91sam9g20ek_config	:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring 9g20,$@)" ] ; then \
		echo "#define CONFIG_AT91SAM9G20EK 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_AT91SAM9260EK 1"	>>$(obj)include/config.h ; \
	fi;
	@if [ "$(findstring _nandflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91

at91sam9xeek_nandflash_config \
at91sam9xeek_dataflash_cs0_config \
at91sam9xeek_dataflash_cs1_config \
at91sam9xeek_config	:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _nandflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91

at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
at91sam9261ek_dataflash_cs3_config \
at91sam9261ek_config \
at91sam9g10ek_nandflash_config \
at91sam9g10ek_dataflash_cs0_config \
at91sam9g10ek_dataflash_cs3_config \
at91sam9g10ek_config	:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring 9g10,$@)" ] ; then \
		echo "#define CONFIG_AT91SAM9G10EK 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_AT91SAM9261EK 1"	>>$(obj)include/config.h ; \
	fi;
	@if [ "$(findstring _nandflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91

at91sam9263ek_norflash_config \
at91sam9263ek_norflash_boot_config \
at91sam9263ek_nandflash_config \
at91sam9263ek_dataflash_config \
at91sam9263ek_dataflash_cs0_config \
at91sam9263ek_config	:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _nandflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
	elif [ "$(findstring norflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NORFLASH 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
	fi;
	@if [ "$(findstring norflash_boot,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91

at91sam9rlek_nandflash_config \
at91sam9rlek_dataflash_config \
at91sam9rlek_dataflash_cs0_config \
at91sam9rlek_config	:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _nandflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_SYS_USE_DATAFLASH 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91

CPU9G20_128M_config \
CPU9G20_config \
CPU9260_128M_config \
CPU9260_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91

at91sam9m10g45ek_nandflash_config \
at91sam9m10g45ek_dataflash_config \
at91sam9m10g45ek_dataflash_cs0_config \
at91sam9m10g45ek_config \
at91sam9g45ekes_nandflash_config \
at91sam9g45ekes_dataflash_config \
at91sam9g45ekes_dataflash_cs0_config \
at91sam9g45ekes_config	:	unconfig
	@mkdir -p $(obj)include
		@if [ "$(findstring 9m10,$@)" ] ; then \
		echo "#define CONFIG_AT91SAM9M10G45EK 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_AT91SAM9G45EKES 1"	>>$(obj)include/config.h ; \
	fi;
	@if [ "$(findstring _nandflash,$@)" ] ; then \
		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
	else \
		echo "#define CONFIG_ATMEL_SPI 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91

pm9g45_config	:	unconfig
	@mkdir -p $(obj)include
	@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91

SBC35_A9G20_NANDFLASH_config \
SBC35_A9G20_EEPROM_config \
SBC35_A9G20_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91

TNY_A9G20_NANDFLASH_config \
TNY_A9G20_EEPROM_config \
TNY_A9G20_config \
TNY_A9260_NANDFLASH_config \
TNY_A9260_EEPROM_config \
TNY_A9260_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91

########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config	\
ap_config		\
ap966_config		\
ap922_config		\
ap922_XA10_config	\
ap7_config		\
ap720t_config		\
ap920t_config		\
ap926ejs_config		\
ap946es_config: unconfig
	@board/armltd/integrator/split_by_variant.sh ap $@

integratorcp_config	\
cp_config		\
cp920t_config		\
cp926ejs_config		\
cp946es_config		\
cp1136_config		\
cp966_config		\
cp922_config		\
cp922_XA10_config	\
cp1026_config: unconfig
	@board/armltd/integrator/split_by_variant.sh cp $@

nhk8815_config \
nhk8815_onenand_config:	unconfig
	@mkdir -p $(obj)include
	@ > $(obj)include/config.h
	@if [ "$(findstring _onenand, $@)" ] ; then \
		echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
	fi
	@$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik

xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))

omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610inn_cs_autoboot_config \
omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
		echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
	elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
	else \
		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap

omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config :	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
		echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
	else \
		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap

spear300_config \
spear310_config \
spear320_config :	unconfig
	@$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear

spear600_config :	unconfig
	@$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear

SX1_stdout_serial_config \
SX1_config:		unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
	else \
		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ SX1 arm arm925t sx1

# TRAB default configuration:	8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config:	unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/trab
	@[ -z "$(findstring _bigram,$@)" ] || \
		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
		  echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
		}
	@[ -z "$(findstring _bigflash,$@)" ] || \
		{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
		}
	@[ -z "$(findstring _old,$@)" ] || \
		{ echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
		  echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
		  echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
		}
	@$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0

tx25_config	: unconfig
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25

edb9301_config \
edb9302_config \
edb9302a_config \
edb9307_config \
edb9307a_config \
edb9312_config \
edb9315_config \
edb9315a_config: unconfig
	@$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx

#########################################################################
# ARM supplied Versatile development boards
#########################################################################

versatile_config	\
versatileab_config	\
versatilepb_config :	unconfig
	@board/armltd/versatile/split_by_variant.sh $@

#########################################################################
## XScale Systems
#########################################################################

pdnb3_config \
scpu_config:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring scpu_,$@)" ] ; then \
		echo "#define CONFIG_SCPU"	>>$(obj)include/config.h ; \
	fi
	@$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive

polaris_config \
trizepsiv_config	:	unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring polaris,$@)" ] ; then \
		echo "#define CONFIG_POLARIS 1"	>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv

vpac270_nor_config \
vpac270_onenand_config	: unconfig
	@mkdir -p $(obj)include
	@if [ "$(findstring onenand,$@)" ] ; then \
		echo "#define CONFIG_ONENAND_U_BOOT" \
			>>$(obj)include/config.h ; \
	fi;
	@$(MKCONFIG) -n $@ -a vpac270 arm pxa vpac270

#########################################################################
## ARM1136 Systems
#########################################################################

apollon_config		: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
	@$(MKCONFIG) $@ arm arm1136 apollon - omap24xx

imx31_phycore_eet_config \
imx31_phycore_config	: unconfig
	@mkdir -p $(obj)include
	@if [ -n "$(findstring _eet_,$@)" ]; then			\
		echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;	\
	fi
	@$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31

mx31pdk_config \
mx31pdk_nand_config	: unconfig
	@mkdir -p $(obj)include
	@if [ -n "$(findstring _nand_,$@)" ]; then					\
		echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;		\
	else										\
		echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;	\
		echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;	\
	fi
	@$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31

#########################################################################
## ARM1176 Systems
#########################################################################
smdk6400_noUSB_config	\
smdk6400_config	:	unconfig
	@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
	@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
	@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then			\
		echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
	else										\
		echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
	fi
	@$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk

#========================================================================
# MIPS
#========================================================================
#########################################################################
## MIPS32 4Kc
#########################################################################

incaip_100MHz_config	\
incaip_133MHz_config	\
incaip_150MHz_config	\
incaip_config: unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _100MHz,$@)" ] || \
		echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h
	@[ -z "$(findstring _133MHz,$@)" ] || \
		echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h
	@[ -z "$(findstring _150MHz,$@)" ] || \
		echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h
	@$(MKCONFIG) -n $@ -a incaip mips mips incaip

vct_premium_config		\
vct_premium_small_config	\
vct_premium_onenand_config	\
vct_premium_onenand_small_config \
vct_platinum_config		\
vct_platinum_small_config	\
vct_platinum_onenand_config	\
vct_platinum_onenand_small_config \
vct_platinumavc_config		\
vct_platinumavc_small_config	\
vct_platinumavc_onenand_config	\
vct_platinumavc_onenand_small_config: unconfig
	@mkdir -p $(obj)include
	@[ -z "$(findstring _premium,$@)" ] || \
		echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h
	@[ -z "$(findstring _platinum_,$@)" ] || \
		echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h
	@[ -z "$(findstring _platinumavc,$@)" ] || \
		echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h
	@[ -z "$(findstring _onenand,$@)" ] || \
		echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h
	@[ -z "$(findstring _small,$@)" ] || \
		echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h
	@$(MKCONFIG)  -n $@ -a vct mips mips vct micronas

#########################################################################
## MIPS32 AU1X00
#########################################################################

dbau1000_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1100_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1500_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1550_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

dbau1550_el_config	:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
	@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00

gth2_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
	@$(MKCONFIG) -a $@ mips mips gth2

pb1000_config		:	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
	@$(MKCONFIG) -a pb1x00 mips mips pb1x00

qemu_mips_config	: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
	@$(MKCONFIG) -a qemu-mips mips mips qemu-mips

#========================================================================
# Nios
#========================================================================

#########################################################################
## Nios-II
#########################################################################

# nios2 generic boards
NIOS2_GENERIC = nios2-generic

$(NIOS2_GENERIC:%=%_config) : unconfig
	@$(MKCONFIG) $@ nios2 nios2 nios2-generic altera

#========================================================================
# Blackfin
#========================================================================

bf527-ezkit-v2_config	: unconfig
	@$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \
		bf527-ezkit blackfin blackfin bf527-ezkit

#========================================================================
# SH3 (SuperH)
#========================================================================

#########################################################################
## sh2 (Renesas SuperH)
#########################################################################
rsk7203_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas

#########################################################################
## sh3 (Renesas SuperH)
#########################################################################

mpr2_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh3 mpr2

ms7720se_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh3 ms7720se

#########################################################################
## sh4 (Renesas SuperH)
#########################################################################

MigoR_config :       unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 MigoR renesas

ms7750se_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 ms7750se

ms7722se_config :	unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 ms7722se

r2dplus_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 r2dplus renesas

r7780mp_config: unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 r7780mp renesas

sh7763rdp_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas

sh7785lcr_32bit_config \
sh7785lcr_config  :   unconfig
	@mkdir -p $(obj)include
	@mkdir -p $(obj)board/renesas/sh7785lcr
	@echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
	@if [ "$(findstring 32bit, $@)" ] ; then \
		echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
		echo "TEXT_BASE = 0x8ff80000" > \
			$(obj)board/renesas/sh7785lcr/config.tmp ; \
	fi
	@$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas

ap325rxa_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas

espt_config  :   unconfig
	@mkdir -p $(obj)include
	@echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
	@$(MKCONFIG) -a $@ sh sh4 espt

#########################################################################
#########################################################################

clean:
	@rm -f $(obj)examples/standalone/82559_eeprom			  \
	       $(obj)examples/standalone/atmel_df_pow2			  \
	       $(obj)examples/standalone/eepro100_eeprom		  \
	       $(obj)examples/standalone/hello_world			  \
	       $(obj)examples/standalone/interrupt			  \
	       $(obj)examples/standalone/mem_to_mem_idma2intr		  \
	       $(obj)examples/standalone/sched				  \
	       $(obj)examples/standalone/smc91111_eeprom		  \
	       $(obj)examples/standalone/test_burst			  \
	       $(obj)examples/standalone/timer
	@rm -f $(obj)examples/api/demo{,.bin}
	@rm -f $(obj)tools/bmp_logo	   $(obj)tools/easylogo/easylogo  \
	       $(obj)tools/env/{fw_printenv,fw_setenv}			  \
	       $(obj)tools/envcrc					  \
	       $(obj)tools/gdb/{astest,gdbcont,gdbsend}			  \
	       $(obj)tools/gen_eth_addr    $(obj)tools/img2srec		  \
	       $(obj)tools/mkimage	   $(obj)tools/mpc86x_clk	  \
	       $(obj)tools/ncb		   $(obj)tools/ubsha1
	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
	       $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}	  \
	       $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
	       $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
	       $(obj)u-boot.lds						  \
	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]
	@rm -f $(obj)include/bmp_logo.h
	@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
	@rm -f $(ONENAND_BIN)
	@rm -f $(obj)onenand_ipl/u-boot.lds
	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
	@find $(OBJTREE) -type f \
		\( -name 'core' -o -name '*.bak' -o -name '*~' \
		-o -name '*.o'	-o -name '*.a' -o -name '*.exe'	\) -print \
		| xargs rm -f

clobber:	clean
	@find $(OBJTREE) -type f \( -name .depend \
		-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
		-print0 \
		| xargs -0 rm -f
	@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
		$(obj)cscope.* $(obj)*.*~
	@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
	@rm -f $(obj)u-boot.kwb
	@rm -f $(obj)u-boot.imx
	@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
	@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
	@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f

ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean:	clobber unconfig
else
mrproper \
distclean:	clobber unconfig
	rm -rf $(obj)*
endif

backup:
	F=`basename $(TOPDIR)` ; cd .. ; \
	gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F

#########################################################################