1# 2# For a description of the syntax of this configuration file, 3# see the file Documentation/kbuild/kconfig-language.txt in the 4# Linux kernel source tree. 5# 6mainmenu "U-Boot $UBOOTVERSION Configuration" 7 8config UBOOTVERSION 9 string 10 option env="UBOOTVERSION" 11 12# Allow defaults in arch-specific code to override any given here 13source "arch/Kconfig" 14 15menu "General setup" 16 17config LOCALVERSION 18 string "Local version - append to U-Boot release" 19 help 20 Append an extra string to the end of your U-Boot version. 21 This will show up in your boot log, for example. 22 The string you set here will be appended after the contents of 23 any files with a filename matching localversion* in your 24 object and source tree, in that order. Your total string can 25 be a maximum of 64 characters. 26 27config LOCALVERSION_AUTO 28 bool "Automatically append version information to the version string" 29 default y 30 help 31 This will try to automatically determine if the current tree is a 32 release tree by looking for Git tags that belong to the current 33 top of tree revision. 34 35 A string of the format -gxxxxxxxx will be added to the localversion 36 if a Git-based tree is found. The string generated by this will be 37 appended after any matching localversion* files, and after the value 38 set in CONFIG_LOCALVERSION. 39 40 (The actual string used here is the first eight characters produced 41 by running the command: 42 43 $ git rev-parse --verify HEAD 44 45 which is done within the script "scripts/setlocalversion".) 46 47config CC_OPTIMIZE_FOR_SIZE 48 bool "Optimize for size" 49 default y 50 help 51 Enabling this option will pass "-Os" instead of "-O2" to gcc 52 resulting in a smaller U-Boot image. 53 54 This option is enabled by default for U-Boot. 55 56config DISTRO_DEFAULTS 57 bool "Select defaults suitable for booting general purpose Linux distributions" 58 default y if ARCH_SUNXI 59 default n 60 select CMD_BOOTZ if ARM && !ARM64 61 select CMD_BOOTI if ARM64 62 select CMD_DHCP 63 select CMD_EXT2 64 select CMD_EXT4 65 select CMD_FAT 66 select CMD_FS_GENERIC 67 select CMD_MII 68 select CMD_PING 69 select HUSH_PARSER 70 help 71 Select this to enable various options and commands which are suitable 72 for building u-boot for booting general purpose Linux distributions. 73 74config SYS_MALLOC_F 75 bool "Enable malloc() pool before relocation" 76 default y if DM 77 help 78 Before relocation, memory is very limited on many platforms. Still, 79 we can provide a small malloc() pool if needed. Driver model in 80 particular needs this to operate, so that it can allocate the 81 initial serial device and any others that are needed. 82 83config SYS_MALLOC_F_LEN 84 hex "Size of malloc() pool before relocation" 85 depends on SYS_MALLOC_F 86 default 0x400 87 help 88 Before relocation, memory is very limited on many platforms. Still, 89 we can provide a small malloc() pool if needed. Driver model in 90 particular needs this to operate, so that it can allocate the 91 initial serial device and any others that are needed. 92 93menuconfig EXPERT 94 bool "Configure standard U-Boot features (expert users)" 95 default y 96 help 97 This option allows certain base U-Boot options and settings 98 to be disabled or tweaked. This is for specialized 99 environments which can tolerate a "non-standard" U-Boot. 100 Use this only if you really know what you are doing. 101 102if EXPERT 103 config SYS_MALLOC_CLEAR_ON_INIT 104 bool "Init with zeros the memory reserved for malloc (slow)" 105 default y 106 help 107 This setting is enabled by default. The reserved malloc 108 memory is initialized with zeros, so first malloc calls 109 will return the pointer to the zeroed memory. But this 110 slows the boot time. 111 112 It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN 113 value, has more than few MiB, e.g. when uses bzip2 or bmp logo. 114 Then the boot time can be significantly reduced. 115 Warning: 116 When disabling this, please check if malloc calls, maybe 117 should be replaced by calloc - if one expects zeroed memory. 118 119config TOOLS_DEBUG 120 bool "Enable debug information for tools" 121 help 122 Enable generation of debug information for tools such as mkimage. 123 This can be used for debugging purposes. With debug information 124 it is possible to set breakpoints on particular lines, single-step 125 debug through the source code, etc. 126 127endif 128 129config PHYS_64BIT 130 bool "64bit physical address support" 131 help 132 Say Y here to support 64bit physical memory address. 133 This can be used not only for 64bit SoCs, but also for 134 large physical address extention on 32bit SoCs. 135 136endmenu # General setup 137 138menu "Boot images" 139 140config FIT 141 bool "Support Flattened Image Tree" 142 help 143 This option allows to boot the new uImage structrure, 144 Flattened Image Tree. FIT is formally a FDT, which can include 145 images of various types (kernel, FDT blob, ramdisk, etc.) 146 in a single blob. To boot this new uImage structure, 147 pass the address of the blob to the "bootm" command. 148 FIT is very flexible, supporting compression, multiple images, 149 multiple configurations, verification through hashing and also 150 verified boot (secure boot using RSA). This option enables that 151 feature. 152 153config SPL_FIT 154 bool "Support Flattened Image Tree within SPL" 155 depends on FIT 156 depends on SPL 157 158config FIT_VERBOSE 159 bool "Display verbose messages on FIT boot" 160 depends on FIT 161 162config FIT_SIGNATURE 163 bool "Enable signature verification of FIT uImages" 164 depends on FIT 165 depends on DM 166 select RSA 167 help 168 This option enables signature verification of FIT uImages, 169 using a hash signed and verified using RSA. If 170 CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive 171 hashing is available using hardware, then then RSA library will use 172 it. See doc/uImage.FIT/signature.txt for more details. 173 174 WARNING: When relying on signed FIT images with a required signature 175 check the legacy image format is disabled by default, so that 176 unsigned images cannot be loaded. If a board needs the legacy image 177 format support in this case, enable it using 178 CONFIG_IMAGE_FORMAT_LEGACY. 179 180config SPL_FIT_SIGNATURE 181 bool "Enable signature verification of FIT firmware within SPL" 182 depends on SPL_FIT 183 depends on SPL_DM 184 select SPL_RSA 185 186config FIT_BEST_MATCH 187 bool "Select the best match for the kernel device tree" 188 depends on FIT 189 help 190 When no configuration is explicitly selected, default to the 191 one whose fdt's compatibility field best matches that of 192 U-Boot itself. A match is considered "best" if it matches the 193 most specific compatibility entry of U-Boot's fdt's root node. 194 The order of entries in the configuration's fdt is ignored. 195 196config FIT_VERBOSE 197 bool "Show verbose messages when FIT images fails" 198 depends on FIT 199 help 200 Generally a system will have valid FIT images so debug messages 201 are a waste of code space. If you are debugging your images then 202 you can enable this option to get more verbose information about 203 failures. 204 205config OF_BOARD_SETUP 206 bool "Set up board-specific details in device tree before boot" 207 depends on OF_LIBFDT 208 help 209 This causes U-Boot to call ft_board_setup() before booting into 210 the Operating System. This function can set up various 211 board-specific information in the device tree for use by the OS. 212 The device tree is then passed to the OS. 213 214config OF_SYSTEM_SETUP 215 bool "Set up system-specific details in device tree before boot" 216 depends on OF_LIBFDT 217 help 218 This causes U-Boot to call ft_system_setup() before booting into 219 the Operating System. This function can set up various 220 system-specific information in the device tree for use by the OS. 221 The device tree is then passed to the OS. 222 223config OF_STDOUT_VIA_ALIAS 224 bool "Update the device-tree stdout alias from U-Boot" 225 depends on OF_LIBFDT 226 help 227 This uses U-Boot's serial alias from the aliases node to update 228 the device tree passed to the OS. The "linux,stdout-path" property 229 in the chosen node is set to point to the correct serial node. 230 This option currently references CONFIG_CONS_INDEX, which is 231 incorrect when used with device tree as this option does not 232 exist / should not be used. 233 234config SYS_EXTRA_OPTIONS 235 string "Extra Options (DEPRECATED)" 236 help 237 The old configuration infrastructure (= mkconfig + boards.cfg) 238 provided the extra options field. If you have something like 239 "HAS_BAR,BAZ=64", the optional options 240 #define CONFIG_HAS 241 #define CONFIG_BAZ 64 242 will be defined in include/config.h. 243 This option was prepared for the smooth migration from the old 244 configuration to Kconfig. Since this option will be removed sometime, 245 new boards should not use this option. 246 247config SYS_TEXT_BASE 248 depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \ 249 (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS 250 depends on !EFI_APP 251 hex "Text Base" 252 help 253 TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture 254 255config SPL_LOAD_FIT 256 bool "Enable SPL loading U-Boot as a FIT" 257 depends on FIT 258 help 259 Normally with the SPL framework a legacy image is generated as part 260 of the build. This contains U-Boot along with information as to 261 where it should be loaded. This option instead enables generation 262 of a FIT (Flat Image Tree) which provides more flexibility. In 263 particular it can handle selecting from multiple device tree 264 and passing the correct one to U-Boot. 265 266config SPL_FIT_IMAGE_POST_PROCESS 267 bool "Enable post-processing of FIT artifacts after loading by the SPL" 268 depends on SPL_LOAD_FIT && TI_SECURE_DEVICE 269 help 270 Allows doing any sort of manipulation to blobs after they got extracted 271 from the U-Boot FIT image like stripping off headers or modifying the 272 size of the blob, verification, authentication, decryption etc. in a 273 platform or board specific way. In order to use this feature a platform 274 or board-specific implementation of board_fit_image_post_process() must 275 be provided. Also, anything done during this post-processing step would 276 need to be comprehended in how the images were prepared before being 277 injected into the FIT creation (i.e. the blobs would have been pre- 278 processed before being added to the FIT image). 279 280config FIT_IMAGE_POST_PROCESS 281 bool "Enable post-processing of FIT artifacts after loading by U-Boot" 282 depends on FIT && TI_SECURE_DEVICE 283 help 284 Allows doing any sort of manipulation to blobs after they got extracted 285 from FIT images like stripping off headers or modifying the size of the 286 blob, verification, authentication, decryption etc. in a platform or 287 board specific way. In order to use this feature a platform or board- 288 specific implementation of board_fit_image_post_process() must be 289 provided. Also, anything done during this post-processing step would 290 need to be comprehended in how the images were prepared before being 291 injected into the FIT creation (i.e. the blobs would have been pre- 292 processed before being added to the FIT image). 293 294config SPL_DFU_SUPPORT 295 bool "Enable SPL with DFU to load binaries to memory device" 296 depends on USB 297 help 298 Currently the SPL does not have capability to load the 299 binaries or boot images to boot devices like ram,eMMC,SPI,etc. 300 This feature enables the DFU (Device Firmware Upgarde) in SPL with 301 RAM memory device support. The ROM code will load and execute 302 the SPL built with dfu. The user can load binaries (u-boot/kernel) to 303 selected device partition from host-pc using dfu-utils. 304 This feature will be useful to flash the binaries to factory 305 or bare-metal boards using USB interface. 306 307choice 308 bool "DFU device selection" 309 depends on SPL_DFU_SUPPORT 310 311config SPL_DFU_RAM 312 bool "RAM device" 313 depends on SPL_DFU_SUPPORT 314 help 315 select RAM/DDR memory device for loading binary images 316 (u-boot/kernel) to the selected device partition using 317 DFU and execute the u-boot/kernel from RAM. 318 319endchoice 320 321config SYS_CLK_FREQ 322 depends on ARC || ARCH_SUNXI 323 int "CPU clock frequency" 324 help 325 TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture 326 327config ARCH_FIXUP_FDT 328 bool "Enable arch_fixup_fdt() call" 329 depends on ARM || MIPS 330 default y 331 help 332 Enable FDT memory map syncup before OS boot. This feature can be 333 used for booting OS with different memory setup where the part of 334 the memory location should be used for different purpose. 335 336endmenu # Boot images 337 338source "common/Kconfig" 339 340source "cmd/Kconfig" 341 342source "dts/Kconfig" 343 344source "net/Kconfig" 345 346source "drivers/Kconfig" 347 348source "fs/Kconfig" 349 350source "lib/Kconfig" 351 352source "test/Kconfig" 353