1 /* 2 * QTest testcase for the SSE timer device 3 * 4 * Copyright (c) 2021 Linaro Limited 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, but WITHOUT 12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 14 * for more details. 15 */ 16 17 #include "qemu/osdep.h" 18 #include "libqtest-single.h" 19 20 /* 21 * SSE-123/SSE-300 timer in the mps3-an547 board, where it is driven 22 * at 32MHz, so 31.25ns per tick. 23 */ 24 #define TIMER_BASE 0x48000000 25 26 /* PERIPHNSPPC0 register in the SSE-300 Secure Access Configuration block */ 27 #define PERIPHNSPPC0 (0x50080000 + 0x70) 28 29 /* Base of the System Counter control frame */ 30 #define COUNTER_BASE 0x58100000 31 32 /* SSE counter register offsets in the control frame */ 33 #define CNTCR 0 34 #define CNTSR 0x4 35 #define CNTCV_LO 0x8 36 #define CNTCV_HI 0xc 37 #define CNTSCR 0x10 38 39 /* SSE timer register offsets */ 40 #define CNTPCT_LO 0 41 #define CNTPCT_HI 4 42 #define CNTFRQ 0x10 43 #define CNTP_CVAL_LO 0x20 44 #define CNTP_CVAL_HI 0x24 45 #define CNTP_TVAL 0x28 46 #define CNTP_CTL 0x2c 47 #define CNTP_AIVAL_LO 0x40 48 #define CNTP_AIVAL_HI 0x44 49 #define CNTP_AIVAL_RELOAD 0x48 50 #define CNTP_AIVAL_CTL 0x4c 51 52 /* 4 ticks in nanoseconds (so we can work in integers) */ 53 #define FOUR_TICKS 125 54 55 static void clock_step_ticks(uint64_t ticks) 56 { 57 /* 58 * Advance the qtest clock by however many nanoseconds we 59 * need to move the timer forward the specified number of ticks. 60 * ticks must be a multiple of 4, so we get a whole number of ns. 61 */ 62 assert(!(ticks & 3)); 63 clock_step(FOUR_TICKS * (ticks >> 2)); 64 } 65 66 static void reset_counter_and_timer(void) 67 { 68 /* 69 * Reset the system counter and the timer between tests. This 70 * isn't a full reset, but it's sufficient for what the tests check. 71 */ 72 writel(COUNTER_BASE + CNTCR, 0); 73 writel(TIMER_BASE + CNTP_CTL, 0); 74 writel(TIMER_BASE + CNTP_AIVAL_CTL, 0); 75 writel(COUNTER_BASE + CNTCV_LO, 0); 76 writel(COUNTER_BASE + CNTCV_HI, 0); 77 } 78 79 static void test_counter(void) 80 { 81 /* Basic counter functionality test */ 82 83 reset_counter_and_timer(); 84 /* The counter should start disabled: check that it doesn't move */ 85 clock_step_ticks(100); 86 g_assert_cmpuint(readl(COUNTER_BASE + CNTCV_LO), ==, 0); 87 g_assert_cmpuint(readl(COUNTER_BASE + CNTCV_HI), ==, 0); 88 /* Now enable it and check that it does count */ 89 writel(COUNTER_BASE + CNTCR, 1); 90 clock_step_ticks(100); 91 g_assert_cmpuint(readl(COUNTER_BASE + CNTCV_LO), ==, 100); 92 g_assert_cmpuint(readl(COUNTER_BASE + CNTCV_HI), ==, 0); 93 /* Check the counter scaling functionality */ 94 writel(COUNTER_BASE + CNTCR, 0); 95 writel(COUNTER_BASE + CNTSCR, 0x00100000); /* 1/16th normal speed */ 96 writel(COUNTER_BASE + CNTCR, 5); /* EN, SCEN */ 97 clock_step_ticks(160); 98 g_assert_cmpuint(readl(COUNTER_BASE + CNTCV_LO), ==, 110); 99 g_assert_cmpuint(readl(COUNTER_BASE + CNTCV_HI), ==, 0); 100 } 101 102 static void test_timer(void) 103 { 104 /* Basic timer functionality test */ 105 106 reset_counter_and_timer(); 107 /* 108 * The timer is behind a Peripheral Protection Controller, and 109 * qtest accesses are always non-secure (no memory attributes), 110 * so we must program the PPC to accept NS transactions. TIMER0 111 * is on port 0 of PPC0, controlled by bit 0 of this register. 112 */ 113 writel(PERIPHNSPPC0, 1); 114 /* We must enable the System Counter or the timer won't run. */ 115 writel(COUNTER_BASE + CNTCR, 1); 116 117 /* Timer starts disabled and with a counter of 0 */ 118 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 0); 119 g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_LO), ==, 0); 120 g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_HI), ==, 0); 121 122 /* Turn it on */ 123 writel(TIMER_BASE + CNTP_CTL, 1); 124 125 /* Is the timer ticking? */ 126 clock_step_ticks(100); 127 g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_LO), ==, 100); 128 g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_HI), ==, 0); 129 130 /* Set the CompareValue to 4000 ticks */ 131 writel(TIMER_BASE + CNTP_CVAL_LO, 4000); 132 writel(TIMER_BASE + CNTP_CVAL_HI, 0); 133 134 /* Check TVAL view of the counter */ 135 g_assert_cmpuint(readl(TIMER_BASE + CNTP_TVAL), ==, 3900); 136 137 /* Advance to the CompareValue mark and check ISTATUS is set */ 138 clock_step_ticks(3900); 139 g_assert_cmpuint(readl(TIMER_BASE + CNTP_TVAL), ==, 0); 140 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 5); 141 142 /* Now exercise the auto-reload part of the timer */ 143 writel(TIMER_BASE + CNTP_AIVAL_RELOAD, 200); 144 writel(TIMER_BASE + CNTP_AIVAL_CTL, 1); 145 146 /* Check AIVAL was reloaded and that ISTATUS is now clear */ 147 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_LO), ==, 4200); 148 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0); 149 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 1); 150 151 /* 152 * Check that when we advance forward to the reload time the interrupt 153 * fires and the value reloads 154 */ 155 clock_step_ticks(100); 156 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 1); 157 clock_step_ticks(100); 158 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 5); 159 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_LO), ==, 4400); 160 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0); 161 162 clock_step_ticks(100); 163 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 5); 164 /* Check that writing 0 to CLR clears the interrupt */ 165 writel(TIMER_BASE + CNTP_AIVAL_CTL, 1); 166 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 1); 167 /* Check that when we move forward to the reload time it fires again */ 168 clock_step_ticks(100); 169 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 5); 170 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_LO), ==, 4600); 171 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0); 172 173 /* 174 * Step the clock far enough that we overflow the low half of the 175 * CNTPCT and AIVAL registers, and check that their high halves 176 * give the right values. We do the forward movement in 177 * non-autoinc mode because otherwise it takes forever as the 178 * timer has to emulate all the 'reload at t + N, t + 2N, etc' 179 * steps. 180 */ 181 writel(TIMER_BASE + CNTP_AIVAL_CTL, 0); 182 clock_step_ticks(0x42ULL << 32); 183 g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_LO), ==, 4400); 184 g_assert_cmpuint(readl(TIMER_BASE + CNTPCT_HI), ==, 0x42); 185 186 /* Turn on the autoinc again to check AIVAL_HI */ 187 writel(TIMER_BASE + CNTP_AIVAL_CTL, 1); 188 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_LO), ==, 4600); 189 g_assert_cmpuint(readl(TIMER_BASE + CNTP_AIVAL_HI), ==, 0x42); 190 } 191 192 static void test_timer_scale_change(void) 193 { 194 /* 195 * Test that the timer responds correctly to counter 196 * scaling changes while it has an active timer. 197 */ 198 reset_counter_and_timer(); 199 /* Give ourselves access to the timer, and enable the counter and timer */ 200 writel(PERIPHNSPPC0, 1); 201 writel(COUNTER_BASE + CNTCR, 1); 202 writel(TIMER_BASE + CNTP_CTL, 1); 203 /* Set the CompareValue to 4000 ticks */ 204 writel(TIMER_BASE + CNTP_CVAL_LO, 4000); 205 writel(TIMER_BASE + CNTP_CVAL_HI, 0); 206 /* Advance halfway and check ISTATUS is not set */ 207 clock_step_ticks(2000); 208 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 1); 209 /* Reprogram the counter to run at 1/16th speed */ 210 writel(COUNTER_BASE + CNTCR, 0); 211 writel(COUNTER_BASE + CNTSCR, 0x00100000); /* 1/16th normal speed */ 212 writel(COUNTER_BASE + CNTCR, 5); /* EN, SCEN */ 213 /* Advance to where the timer would have fired and check it has not */ 214 clock_step_ticks(2000); 215 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 1); 216 /* Advance to where the timer must fire at the new clock rate */ 217 clock_step_ticks(29996); 218 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 1); 219 clock_step_ticks(4); 220 g_assert_cmpuint(readl(TIMER_BASE + CNTP_CTL), ==, 5); 221 } 222 223 int main(int argc, char **argv) 224 { 225 int r; 226 227 g_test_init(&argc, &argv, NULL); 228 229 qtest_start("-machine mps3-an547"); 230 231 qtest_add_func("/sse-timer/counter", test_counter); 232 qtest_add_func("/sse-timer/timer", test_timer); 233 qtest_add_func("/sse-timer/timer-scale-change", test_timer_scale_change); 234 235 r = g_test_run(); 236 237 qtest_end(); 238 239 return r; 240 } 241