xref: /openbmc/qemu/tests/qtest/npcm7xx_emc-test.c (revision 86e372ad)
1 /*
2  * QTests for Nuvoton NPCM7xx EMC Modules.
3  *
4  * Copyright 2020 Google LLC
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License as published by the
8  * Free Software Foundation; either version 2 of the License, or
9  * (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful, but WITHOUT
12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14  * for more details.
15  */
16 
17 #include "qemu/osdep.h"
18 #include "libqos/libqos.h"
19 #include "qapi/qmp/qdict.h"
20 #include "qapi/qmp/qnum.h"
21 #include "qemu/bitops.h"
22 #include "qemu/iov.h"
23 
24 /* Name of the emc device. */
25 #define TYPE_NPCM7XX_EMC "npcm7xx-emc"
26 
27 /* Timeout for various operations, in seconds. */
28 #define TIMEOUT_SECONDS 10
29 
30 /* Address in memory of the descriptor. */
31 #define DESC_ADDR (1 << 20) /* 1 MiB */
32 
33 /* Address in memory of the data packet. */
34 #define DATA_ADDR (DESC_ADDR + 4096)
35 
36 #define CRC_LENGTH 4
37 
38 #define NUM_TX_DESCRIPTORS 3
39 #define NUM_RX_DESCRIPTORS 2
40 
41 /* Size of tx,rx test buffers. */
42 #define TX_DATA_LEN 64
43 #define RX_DATA_LEN 64
44 
45 #define TX_STEP_COUNT 10000
46 #define RX_STEP_COUNT 10000
47 
48 /* 32-bit register indices. */
49 typedef enum NPCM7xxPWMRegister {
50     /* Control registers. */
51     REG_CAMCMR,
52     REG_CAMEN,
53 
54     /* There are 16 CAMn[ML] registers. */
55     REG_CAMM_BASE,
56     REG_CAML_BASE,
57 
58     REG_TXDLSA = 0x22,
59     REG_RXDLSA,
60     REG_MCMDR,
61     REG_MIID,
62     REG_MIIDA,
63     REG_FFTCR,
64     REG_TSDR,
65     REG_RSDR,
66     REG_DMARFC,
67     REG_MIEN,
68 
69     /* Status registers. */
70     REG_MISTA,
71     REG_MGSTA,
72     REG_MPCNT,
73     REG_MRPC,
74     REG_MRPCC,
75     REG_MREPC,
76     REG_DMARFS,
77     REG_CTXDSA,
78     REG_CTXBSA,
79     REG_CRXDSA,
80     REG_CRXBSA,
81 
82     NPCM7XX_NUM_EMC_REGS,
83 } NPCM7xxPWMRegister;
84 
85 enum { NUM_CAMML_REGS = 16 };
86 
87 /* REG_CAMCMR fields */
88 /* Enable CAM Compare */
89 #define REG_CAMCMR_ECMP (1 << 4)
90 /* Accept Unicast Packet */
91 #define REG_CAMCMR_AUP (1 << 0)
92 
93 /* REG_MCMDR fields */
94 /* Software Reset */
95 #define REG_MCMDR_SWR (1 << 24)
96 /* Frame Transmission On */
97 #define REG_MCMDR_TXON (1 << 8)
98 /* Accept Long Packet */
99 #define REG_MCMDR_ALP (1 << 1)
100 /* Frame Reception On */
101 #define REG_MCMDR_RXON (1 << 0)
102 
103 /* REG_MIEN fields */
104 /* Enable Transmit Completion Interrupt */
105 #define REG_MIEN_ENTXCP (1 << 18)
106 /* Enable Transmit Interrupt */
107 #define REG_MIEN_ENTXINTR (1 << 16)
108 /* Enable Receive Good Interrupt */
109 #define REG_MIEN_ENRXGD (1 << 4)
110 /* ENable Receive Interrupt */
111 #define REG_MIEN_ENRXINTR (1 << 0)
112 
113 /* REG_MISTA fields */
114 /* Transmit Bus Error Interrupt */
115 #define REG_MISTA_TXBERR (1 << 24)
116 /* Transmit Descriptor Unavailable Interrupt */
117 #define REG_MISTA_TDU (1 << 23)
118 /* Transmit Completion Interrupt */
119 #define REG_MISTA_TXCP (1 << 18)
120 /* Transmit Interrupt */
121 #define REG_MISTA_TXINTR (1 << 16)
122 /* Receive Bus Error Interrupt */
123 #define REG_MISTA_RXBERR (1 << 11)
124 /* Receive Descriptor Unavailable Interrupt */
125 #define REG_MISTA_RDU (1 << 10)
126 /* DMA Early Notification Interrupt */
127 #define REG_MISTA_DENI (1 << 9)
128 /* Maximum Frame Length Interrupt */
129 #define REG_MISTA_DFOI (1 << 8)
130 /* Receive Good Interrupt */
131 #define REG_MISTA_RXGD (1 << 4)
132 /* Packet Too Long Interrupt */
133 #define REG_MISTA_PTLE (1 << 3)
134 /* Receive Interrupt */
135 #define REG_MISTA_RXINTR (1 << 0)
136 
137 typedef struct NPCM7xxEMCTxDesc NPCM7xxEMCTxDesc;
138 typedef struct NPCM7xxEMCRxDesc NPCM7xxEMCRxDesc;
139 
140 struct NPCM7xxEMCTxDesc {
141     uint32_t flags;
142     uint32_t txbsa;
143     uint32_t status_and_length;
144     uint32_t ntxdsa;
145 };
146 
147 struct NPCM7xxEMCRxDesc {
148     uint32_t status_and_length;
149     uint32_t rxbsa;
150     uint32_t reserved;
151     uint32_t nrxdsa;
152 };
153 
154 /* NPCM7xxEMCTxDesc.flags values */
155 /* Owner: 0 = cpu, 1 = emc */
156 #define TX_DESC_FLAG_OWNER_MASK (1 << 31)
157 /* Transmit interrupt enable */
158 #define TX_DESC_FLAG_INTEN (1 << 2)
159 
160 /* NPCM7xxEMCTxDesc.status_and_length values */
161 /* Transmission complete */
162 #define TX_DESC_STATUS_TXCP (1 << 19)
163 /* Transmit interrupt */
164 #define TX_DESC_STATUS_TXINTR (1 << 16)
165 
166 /* NPCM7xxEMCRxDesc.status_and_length values */
167 /* Owner: 0b00 = cpu, 0b10 = emc */
168 #define RX_DESC_STATUS_OWNER_SHIFT 30
169 #define RX_DESC_STATUS_OWNER_MASK 0xc0000000
170 /* Frame Reception Complete */
171 #define RX_DESC_STATUS_RXGD (1 << 20)
172 /* Packet too long */
173 #define RX_DESC_STATUS_PTLE (1 << 19)
174 /* Receive Interrupt */
175 #define RX_DESC_STATUS_RXINTR (1 << 16)
176 
177 #define RX_DESC_PKT_LEN(word) ((uint32_t) (word) & 0xffff)
178 
179 typedef struct EMCModule {
180     int rx_irq;
181     int tx_irq;
182     uint64_t base_addr;
183 } EMCModule;
184 
185 typedef struct TestData {
186     const EMCModule *module;
187 } TestData;
188 
189 static const EMCModule emc_module_list[] = {
190     {
191         .rx_irq     = 15,
192         .tx_irq     = 16,
193         .base_addr  = 0xf0825000
194     },
195     {
196         .rx_irq     = 114,
197         .tx_irq     = 115,
198         .base_addr  = 0xf0826000
199     }
200 };
201 
202 /* Returns the index of the EMC module. */
203 static int emc_module_index(const EMCModule *mod)
204 {
205     ptrdiff_t diff = mod - emc_module_list;
206 
207     g_assert_true(diff >= 0 && diff < ARRAY_SIZE(emc_module_list));
208 
209     return diff;
210 }
211 
212 #ifndef _WIN32
213 static void packet_test_clear(void *sockets)
214 {
215     int *test_sockets = sockets;
216 
217     close(test_sockets[0]);
218     g_free(test_sockets);
219 }
220 
221 static int *packet_test_init(int module_num, GString *cmd_line)
222 {
223     int *test_sockets = g_new(int, 2);
224     int ret = socketpair(PF_UNIX, SOCK_STREAM, 0, test_sockets);
225     g_assert_cmpint(ret, != , -1);
226 
227     /*
228      * KISS and use -nic. The driver accepts 'emc0' and 'emc1' as aliases
229      * in the 'model' field to specify the device to match.
230      */
231     g_string_append_printf(cmd_line, " -nic socket,fd=%d,model=emc%d "
232                            "-nic user,model=npcm7xx-emc "
233                            "-nic user,model=npcm-gmac "
234                            "-nic user,model=npcm-gmac",
235                            test_sockets[1], module_num);
236 
237     g_test_queue_destroy(packet_test_clear, test_sockets);
238     return test_sockets;
239 }
240 #endif /* _WIN32 */
241 
242 static uint32_t emc_read(QTestState *qts, const EMCModule *mod,
243                          NPCM7xxPWMRegister regno)
244 {
245     return qtest_readl(qts, mod->base_addr + regno * sizeof(uint32_t));
246 }
247 
248 #ifndef _WIN32
249 static void emc_write(QTestState *qts, const EMCModule *mod,
250                       NPCM7xxPWMRegister regno, uint32_t value)
251 {
252     qtest_writel(qts, mod->base_addr + regno * sizeof(uint32_t), value);
253 }
254 
255 static void emc_read_tx_desc(QTestState *qts, uint32_t addr,
256                              NPCM7xxEMCTxDesc *desc)
257 {
258     qtest_memread(qts, addr, desc, sizeof(*desc));
259     desc->flags = le32_to_cpu(desc->flags);
260     desc->txbsa = le32_to_cpu(desc->txbsa);
261     desc->status_and_length = le32_to_cpu(desc->status_and_length);
262     desc->ntxdsa = le32_to_cpu(desc->ntxdsa);
263 }
264 
265 static void emc_write_tx_desc(QTestState *qts, const NPCM7xxEMCTxDesc *desc,
266                               uint32_t addr)
267 {
268     NPCM7xxEMCTxDesc le_desc;
269 
270     le_desc.flags = cpu_to_le32(desc->flags);
271     le_desc.txbsa = cpu_to_le32(desc->txbsa);
272     le_desc.status_and_length = cpu_to_le32(desc->status_and_length);
273     le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa);
274     qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc));
275 }
276 
277 static void emc_read_rx_desc(QTestState *qts, uint32_t addr,
278                              NPCM7xxEMCRxDesc *desc)
279 {
280     qtest_memread(qts, addr, desc, sizeof(*desc));
281     desc->status_and_length = le32_to_cpu(desc->status_and_length);
282     desc->rxbsa = le32_to_cpu(desc->rxbsa);
283     desc->reserved = le32_to_cpu(desc->reserved);
284     desc->nrxdsa = le32_to_cpu(desc->nrxdsa);
285 }
286 
287 static void emc_write_rx_desc(QTestState *qts, const NPCM7xxEMCRxDesc *desc,
288                               uint32_t addr)
289 {
290     NPCM7xxEMCRxDesc le_desc;
291 
292     le_desc.status_and_length = cpu_to_le32(desc->status_and_length);
293     le_desc.rxbsa = cpu_to_le32(desc->rxbsa);
294     le_desc.reserved = cpu_to_le32(desc->reserved);
295     le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa);
296     qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc));
297 }
298 
299 /*
300  * Reset the EMC module.
301  * The module must be reset before, e.g., TXDLSA,RXDLSA are changed.
302  */
303 static bool emc_soft_reset(QTestState *qts, const EMCModule *mod)
304 {
305     uint32_t val;
306     uint64_t end_time;
307 
308     emc_write(qts, mod, REG_MCMDR, REG_MCMDR_SWR);
309 
310     /*
311      * Wait for device to reset as the linux driver does.
312      * During reset the AHB reads 0 for all registers. So first wait for
313      * something that resets to non-zero, and then wait for SWR becoming 0.
314      */
315     end_time = g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND;
316 
317     do {
318         qtest_clock_step(qts, 100);
319         val = emc_read(qts, mod, REG_FFTCR);
320     } while (val == 0 && g_get_monotonic_time() < end_time);
321     if (val != 0) {
322         do {
323             qtest_clock_step(qts, 100);
324             val = emc_read(qts, mod, REG_MCMDR);
325             if ((val & REG_MCMDR_SWR) == 0) {
326                 /*
327                  * N.B. The CAMs have been reset here, so macaddr matching of
328                  * incoming packets will not work.
329                  */
330                 return true;
331             }
332         } while (g_get_monotonic_time() < end_time);
333     }
334 
335     g_message("%s: Timeout expired", __func__);
336     return false;
337 }
338 #endif /* _WIN32 */
339 
340 /* Check emc registers are reset to default value. */
341 static void test_init(gconstpointer test_data)
342 {
343     const TestData *td = test_data;
344     const EMCModule *mod = td->module;
345     QTestState *qts = qtest_init("-machine quanta-gsj");
346     int i;
347 
348 #define CHECK_REG(regno, value) \
349   do { \
350     g_assert_cmphex(emc_read(qts, mod, (regno)), ==, (value)); \
351   } while (0)
352 
353     CHECK_REG(REG_CAMCMR, 0);
354     CHECK_REG(REG_CAMEN, 0);
355     CHECK_REG(REG_TXDLSA, 0xfffffffc);
356     CHECK_REG(REG_RXDLSA, 0xfffffffc);
357     CHECK_REG(REG_MCMDR, 0);
358     CHECK_REG(REG_MIID, 0);
359     CHECK_REG(REG_MIIDA, 0x00900000);
360     CHECK_REG(REG_FFTCR, 0x0101);
361     CHECK_REG(REG_DMARFC, 0x0800);
362     CHECK_REG(REG_MIEN, 0);
363     CHECK_REG(REG_MISTA, 0);
364     CHECK_REG(REG_MGSTA, 0);
365     CHECK_REG(REG_MPCNT, 0x7fff);
366     CHECK_REG(REG_MRPC, 0);
367     CHECK_REG(REG_MRPCC, 0);
368     CHECK_REG(REG_MREPC, 0);
369     CHECK_REG(REG_DMARFS, 0);
370     CHECK_REG(REG_CTXDSA, 0);
371     CHECK_REG(REG_CTXBSA, 0);
372     CHECK_REG(REG_CRXDSA, 0);
373     CHECK_REG(REG_CRXBSA, 0);
374 
375 #undef CHECK_REG
376 
377     /* Skip over the MAC address registers, which is BASE+0 */
378     for (i = 1; i < NUM_CAMML_REGS; ++i) {
379         g_assert_cmpuint(emc_read(qts, mod, REG_CAMM_BASE + i * 2), ==,
380                          0);
381         g_assert_cmpuint(emc_read(qts, mod, REG_CAML_BASE + i * 2), ==,
382                          0);
383     }
384 
385     qtest_quit(qts);
386 }
387 
388 #ifndef _WIN32
389 static bool emc_wait_irq(QTestState *qts, const EMCModule *mod, int step,
390                          bool is_tx)
391 {
392     uint64_t end_time =
393         g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND;
394 
395     do {
396         if (qtest_get_irq(qts, is_tx ? mod->tx_irq : mod->rx_irq)) {
397             return true;
398         }
399         qtest_clock_step(qts, step);
400     } while (g_get_monotonic_time() < end_time);
401 
402     g_message("%s: Timeout expired", __func__);
403     return false;
404 }
405 
406 static bool emc_wait_mista(QTestState *qts, const EMCModule *mod, int step,
407                            uint32_t flag)
408 {
409     uint64_t end_time =
410         g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND;
411 
412     do {
413         uint32_t mista = emc_read(qts, mod, REG_MISTA);
414         if (mista & flag) {
415             return true;
416         }
417         qtest_clock_step(qts, step);
418     } while (g_get_monotonic_time() < end_time);
419 
420     g_message("%s: Timeout expired", __func__);
421     return false;
422 }
423 
424 static bool wait_socket_readable(int fd)
425 {
426     fd_set read_fds;
427     struct timeval tv;
428     int rv;
429 
430     FD_ZERO(&read_fds);
431     FD_SET(fd, &read_fds);
432     tv.tv_sec = TIMEOUT_SECONDS;
433     tv.tv_usec = 0;
434     rv = select(fd + 1, &read_fds, NULL, NULL, &tv);
435     if (rv == -1) {
436         perror("select");
437     } else if (rv == 0) {
438         g_message("%s: Timeout expired", __func__);
439     }
440     return rv == 1;
441 }
442 
443 /* Initialize *desc (in host endian format). */
444 static void init_tx_desc(NPCM7xxEMCTxDesc *desc, size_t count,
445                          uint32_t desc_addr)
446 {
447     g_assert(count >= 2);
448     memset(&desc[0], 0, sizeof(*desc) * count);
449     /* Leave the last one alone, owned by the cpu -> stops transmission. */
450     for (size_t i = 0; i < count - 1; ++i) {
451         desc[i].flags =
452             (TX_DESC_FLAG_OWNER_MASK | /* owner = 1: emc */
453              TX_DESC_FLAG_INTEN |
454              0 | /* crc append = 0 */
455              0 /* padding enable = 0 */);
456         desc[i].status_and_length =
457             (0 | /* collision count = 0 */
458              0 | /* SQE = 0 */
459              0 | /* PAU = 0 */
460              0 | /* TXHA = 0 */
461              0 | /* LC = 0 */
462              0 | /* TXABT = 0 */
463              0 | /* NCS = 0 */
464              0 | /* EXDEF = 0 */
465              0 | /* TXCP = 0 */
466              0 | /* DEF = 0 */
467              0 | /* TXINTR = 0 */
468              0 /* length filled in later */);
469         desc[i].ntxdsa = desc_addr + (i + 1) * sizeof(*desc);
470     }
471 }
472 
473 static void enable_tx(QTestState *qts, const EMCModule *mod,
474                       const NPCM7xxEMCTxDesc *desc, size_t count,
475                       uint32_t desc_addr, uint32_t mien_flags)
476 {
477     /* Write the descriptors to guest memory. */
478     for (size_t i = 0; i < count; ++i) {
479         emc_write_tx_desc(qts, desc + i, desc_addr + i * sizeof(*desc));
480     }
481 
482     /* Trigger sending the packet. */
483     /* The module must be reset before changing TXDLSA. */
484     g_assert(emc_soft_reset(qts, mod));
485     emc_write(qts, mod, REG_TXDLSA, desc_addr);
486     emc_write(qts, mod, REG_CTXDSA, ~0);
487     emc_write(qts, mod, REG_MIEN, REG_MIEN_ENTXCP | mien_flags);
488     {
489         uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR);
490         mcmdr |= REG_MCMDR_TXON;
491         emc_write(qts, mod, REG_MCMDR, mcmdr);
492     }
493 }
494 
495 static void emc_send_verify1(QTestState *qts, const EMCModule *mod, int fd,
496                              bool with_irq, uint32_t desc_addr,
497                              uint32_t next_desc_addr,
498                              const char *test_data, int test_size)
499 {
500     NPCM7xxEMCTxDesc result_desc;
501     uint32_t expected_mask, expected_value, recv_len;
502     int ret;
503     char buffer[TX_DATA_LEN];
504 
505     g_assert(wait_socket_readable(fd));
506 
507     /* Read the descriptor back. */
508     emc_read_tx_desc(qts, desc_addr, &result_desc);
509     /* Descriptor should be owned by cpu now. */
510     g_assert((result_desc.flags & TX_DESC_FLAG_OWNER_MASK) == 0);
511     /* Test the status bits, ignoring the length field. */
512     expected_mask = 0xffff << 16;
513     expected_value = TX_DESC_STATUS_TXCP;
514     if (with_irq) {
515         expected_value |= TX_DESC_STATUS_TXINTR;
516     }
517     g_assert_cmphex((result_desc.status_and_length & expected_mask), ==,
518                     expected_value);
519 
520     /* Check data sent to the backend. */
521     recv_len = ~0;
522     ret = recv(fd, &recv_len, sizeof(recv_len), MSG_DONTWAIT);
523     g_assert_cmpint(ret, == , sizeof(recv_len));
524 
525     g_assert(wait_socket_readable(fd));
526     memset(buffer, 0xff, sizeof(buffer));
527     ret = recv(fd, buffer, test_size, MSG_DONTWAIT);
528     g_assert_cmpmem(buffer, ret, test_data, test_size);
529 }
530 
531 static void emc_send_verify(QTestState *qts, const EMCModule *mod, int fd,
532                             bool with_irq)
533 {
534     NPCM7xxEMCTxDesc desc[NUM_TX_DESCRIPTORS];
535     uint32_t desc_addr = DESC_ADDR;
536     static const char test1_data[] = "TEST1";
537     static const char test2_data[] = "Testing 1 2 3 ...";
538     uint32_t data1_addr = DATA_ADDR;
539     uint32_t data2_addr = data1_addr + sizeof(test1_data);
540     bool got_tdu;
541     uint32_t end_desc_addr;
542 
543     /* Prepare test data buffer. */
544     qtest_memwrite(qts, data1_addr, test1_data, sizeof(test1_data));
545     qtest_memwrite(qts, data2_addr, test2_data, sizeof(test2_data));
546 
547     init_tx_desc(&desc[0], NUM_TX_DESCRIPTORS, desc_addr);
548     desc[0].txbsa = data1_addr;
549     desc[0].status_and_length |= sizeof(test1_data);
550     desc[1].txbsa = data2_addr;
551     desc[1].status_and_length |= sizeof(test2_data);
552 
553     enable_tx(qts, mod, &desc[0], NUM_TX_DESCRIPTORS, desc_addr,
554               with_irq ? REG_MIEN_ENTXINTR : 0);
555 
556     /* Prod the device to send the packet. */
557     emc_write(qts, mod, REG_TSDR, 1);
558 
559     /*
560      * It's problematic to observe the interrupt for each packet.
561      * Instead just wait until all the packets go out.
562      */
563     got_tdu = false;
564     while (!got_tdu) {
565         if (with_irq) {
566             g_assert_true(emc_wait_irq(qts, mod, TX_STEP_COUNT,
567                                        /*is_tx=*/true));
568         } else {
569             g_assert_true(emc_wait_mista(qts, mod, TX_STEP_COUNT,
570                                          REG_MISTA_TXINTR));
571         }
572         got_tdu = !!(emc_read(qts, mod, REG_MISTA) & REG_MISTA_TDU);
573         /* If we don't have TDU yet, reset the interrupt. */
574         if (!got_tdu) {
575             emc_write(qts, mod, REG_MISTA,
576                       emc_read(qts, mod, REG_MISTA) & 0xffff0000);
577         }
578     }
579 
580     end_desc_addr = desc_addr + 2 * sizeof(desc[0]);
581     g_assert_cmphex(emc_read(qts, mod, REG_CTXDSA), ==, end_desc_addr);
582     g_assert_cmphex(emc_read(qts, mod, REG_MISTA), ==,
583                     REG_MISTA_TXCP | REG_MISTA_TXINTR | REG_MISTA_TDU);
584 
585     emc_send_verify1(qts, mod, fd, with_irq,
586                      desc_addr, end_desc_addr,
587                      test1_data, sizeof(test1_data));
588     emc_send_verify1(qts, mod, fd, with_irq,
589                      desc_addr + sizeof(desc[0]), end_desc_addr,
590                      test2_data, sizeof(test2_data));
591 }
592 
593 /* Initialize *desc (in host endian format). */
594 static void init_rx_desc(NPCM7xxEMCRxDesc *desc, size_t count,
595                          uint32_t desc_addr, uint32_t data_addr)
596 {
597     g_assert_true(count >= 2);
598     memset(desc, 0, sizeof(*desc) * count);
599     desc[0].rxbsa = data_addr;
600     desc[0].status_and_length =
601         (0b10 << RX_DESC_STATUS_OWNER_SHIFT | /* owner = 10: emc */
602          0 | /* RP = 0 */
603          0 | /* ALIE = 0 */
604          0 | /* RXGD = 0 */
605          0 | /* PTLE = 0 */
606          0 | /* CRCE = 0 */
607          0 | /* RXINTR = 0 */
608          0   /* length (filled in later) */);
609     /* Leave the last one alone, owned by the cpu -> stops transmission. */
610     desc[0].nrxdsa = desc_addr + sizeof(*desc);
611 }
612 
613 static void enable_rx(QTestState *qts, const EMCModule *mod,
614                       const NPCM7xxEMCRxDesc *desc, size_t count,
615                       uint32_t desc_addr, uint32_t mien_flags,
616                       uint32_t mcmdr_flags)
617 {
618     /*
619      * Write the descriptor to guest memory.
620      * FWIW, IWBN if the docs said the buffer needs to be at least DMARFC
621      * bytes.
622      */
623     for (size_t i = 0; i < count; ++i) {
624         emc_write_rx_desc(qts, desc + i, desc_addr + i * sizeof(*desc));
625     }
626 
627     /* Trigger receiving the packet. */
628     /* The module must be reset before changing RXDLSA. */
629     g_assert(emc_soft_reset(qts, mod));
630     emc_write(qts, mod, REG_RXDLSA, desc_addr);
631     emc_write(qts, mod, REG_MIEN, REG_MIEN_ENRXGD | mien_flags);
632 
633     /*
634      * We don't know what the device's macaddr is, so just accept all
635      * unicast packets (AUP).
636      */
637     emc_write(qts, mod, REG_CAMCMR, REG_CAMCMR_AUP);
638     emc_write(qts, mod, REG_CAMEN, 1 << 0);
639     {
640         uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR);
641         mcmdr |= REG_MCMDR_RXON | mcmdr_flags;
642         emc_write(qts, mod, REG_MCMDR, mcmdr);
643     }
644 }
645 
646 static void emc_recv_verify(QTestState *qts, const EMCModule *mod, int fd,
647                             bool with_irq, bool pump_rsdr)
648 {
649     NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS];
650     uint32_t desc_addr = DESC_ADDR;
651     uint32_t data_addr = DATA_ADDR;
652     int ret;
653     uint32_t expected_mask, expected_value;
654     NPCM7xxEMCRxDesc result_desc;
655 
656     /* Prepare test data buffer. */
657     const char test[RX_DATA_LEN] = "TEST";
658     int len = htonl(sizeof(test));
659     const struct iovec iov[] = {
660         {
661             .iov_base = &len,
662             .iov_len = sizeof(len),
663         },{
664             .iov_base = (char *) test,
665             .iov_len = sizeof(test),
666         },
667     };
668 
669     /*
670      * Reset the device BEFORE sending a test packet, otherwise the packet
671      * may get swallowed by an active device of an earlier test.
672      */
673     init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr);
674     enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr,
675               with_irq ? REG_MIEN_ENRXINTR : 0, 0);
676 
677     /*
678      * If requested, prod the device to accept a packet.
679      * This isn't necessary, the linux driver doesn't do this.
680      * Test doing/not-doing this for robustness.
681      */
682     if (pump_rsdr) {
683         emc_write(qts, mod, REG_RSDR, 1);
684     }
685 
686     /* Send test packet to device's socket. */
687     ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test));
688     g_assert_cmpint(ret, == , sizeof(test) + sizeof(len));
689 
690     /* Wait for RX interrupt. */
691     if (with_irq) {
692         g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false));
693     } else {
694         g_assert_true(emc_wait_mista(qts, mod, RX_STEP_COUNT, REG_MISTA_RXGD));
695     }
696 
697     g_assert_cmphex(emc_read(qts, mod, REG_CRXDSA), ==,
698                     desc_addr + sizeof(desc[0]));
699 
700     expected_mask = 0xffff;
701     expected_value = (REG_MISTA_DENI |
702                       REG_MISTA_RXGD |
703                       REG_MISTA_RXINTR);
704     g_assert_cmphex((emc_read(qts, mod, REG_MISTA) & expected_mask),
705                     ==, expected_value);
706 
707     /* Read the descriptor back. */
708     emc_read_rx_desc(qts, desc_addr, &result_desc);
709     /* Descriptor should be owned by cpu now. */
710     g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0);
711     /* Test the status bits, ignoring the length field. */
712     expected_mask = 0xffff << 16;
713     expected_value = RX_DESC_STATUS_RXGD;
714     if (with_irq) {
715         expected_value |= RX_DESC_STATUS_RXINTR;
716     }
717     g_assert_cmphex((result_desc.status_and_length & expected_mask), ==,
718                     expected_value);
719     g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==,
720                     RX_DATA_LEN + CRC_LENGTH);
721 
722     {
723         char buffer[RX_DATA_LEN];
724         qtest_memread(qts, data_addr, buffer, sizeof(buffer));
725         g_assert_cmpstr(buffer, == , "TEST");
726     }
727 }
728 
729 static void emc_test_ptle(QTestState *qts, const EMCModule *mod, int fd)
730 {
731     NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS];
732     uint32_t desc_addr = DESC_ADDR;
733     uint32_t data_addr = DATA_ADDR;
734     int ret;
735     NPCM7xxEMCRxDesc result_desc;
736     uint32_t expected_mask, expected_value;
737 
738     /* Prepare test data buffer. */
739 #define PTLE_DATA_LEN 1600
740     char test_data[PTLE_DATA_LEN];
741     int len = htonl(sizeof(test_data));
742     const struct iovec iov[] = {
743         {
744             .iov_base = &len,
745             .iov_len = sizeof(len),
746         },{
747             .iov_base = (char *) test_data,
748             .iov_len = sizeof(test_data),
749         },
750     };
751     memset(test_data, 42, sizeof(test_data));
752 
753     /*
754      * Reset the device BEFORE sending a test packet, otherwise the packet
755      * may get swallowed by an active device of an earlier test.
756      */
757     init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr);
758     enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr,
759               REG_MIEN_ENRXINTR, REG_MCMDR_ALP);
760 
761     /* Send test packet to device's socket. */
762     ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test_data));
763     g_assert_cmpint(ret, == , sizeof(test_data) + sizeof(len));
764 
765     /* Wait for RX interrupt. */
766     g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false));
767 
768     /* Read the descriptor back. */
769     emc_read_rx_desc(qts, desc_addr, &result_desc);
770     /* Descriptor should be owned by cpu now. */
771     g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0);
772     /* Test the status bits, ignoring the length field. */
773     expected_mask = 0xffff << 16;
774     expected_value = (RX_DESC_STATUS_RXGD |
775                       RX_DESC_STATUS_PTLE |
776                       RX_DESC_STATUS_RXINTR);
777     g_assert_cmphex((result_desc.status_and_length & expected_mask), ==,
778                     expected_value);
779     g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==,
780                     PTLE_DATA_LEN + CRC_LENGTH);
781 
782     {
783         char buffer[PTLE_DATA_LEN];
784         qtest_memread(qts, data_addr, buffer, sizeof(buffer));
785         g_assert(memcmp(buffer, test_data, PTLE_DATA_LEN) == 0);
786     }
787 }
788 
789 static void test_tx(gconstpointer test_data)
790 {
791     const TestData *td = test_data;
792     GString *cmd_line = g_string_new("-machine quanta-gsj");
793     int *test_sockets = packet_test_init(emc_module_index(td->module),
794                                          cmd_line);
795     QTestState *qts = qtest_init(cmd_line->str);
796 
797     /*
798      * TODO: For pedantic correctness test_sockets[0] should be closed after
799      * the fork and before the exec, but that will require some harness
800      * improvements.
801      */
802     close(test_sockets[1]);
803     /* Defensive programming */
804     test_sockets[1] = -1;
805 
806     qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
807 
808     emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/false);
809     emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/true);
810 
811     qtest_quit(qts);
812 }
813 
814 static void test_rx(gconstpointer test_data)
815 {
816     const TestData *td = test_data;
817     GString *cmd_line = g_string_new("-machine quanta-gsj");
818     int *test_sockets = packet_test_init(emc_module_index(td->module),
819                                          cmd_line);
820     QTestState *qts = qtest_init(cmd_line->str);
821 
822     /*
823      * TODO: For pedantic correctness test_sockets[0] should be closed after
824      * the fork and before the exec, but that will require some harness
825      * improvements.
826      */
827     close(test_sockets[1]);
828     /* Defensive programming */
829     test_sockets[1] = -1;
830 
831     qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic");
832 
833     emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/false,
834                     /*pump_rsdr=*/false);
835     emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/false,
836                     /*pump_rsdr=*/true);
837     emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/true,
838                     /*pump_rsdr=*/false);
839     emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/true,
840                     /*pump_rsdr=*/true);
841     emc_test_ptle(qts, td->module, test_sockets[0]);
842 
843     qtest_quit(qts);
844 }
845 #endif /* _WIN32 */
846 
847 static void emc_add_test(const char *name, const TestData* td,
848                          GTestDataFunc fn)
849 {
850     g_autofree char *full_name = g_strdup_printf(
851             "npcm7xx_emc/emc[%d]/%s", emc_module_index(td->module), name);
852     qtest_add_data_func(full_name, td, fn);
853 }
854 #define add_test(name, td) emc_add_test(#name, td, test_##name)
855 
856 int main(int argc, char **argv)
857 {
858     TestData test_data_list[ARRAY_SIZE(emc_module_list)];
859 
860     g_test_init(&argc, &argv, NULL);
861 
862     for (int i = 0; i < ARRAY_SIZE(emc_module_list); ++i) {
863         TestData *td = &test_data_list[i];
864 
865         td->module = &emc_module_list[i];
866 
867         add_test(init, td);
868 #ifndef _WIN32
869         add_test(tx, td);
870         add_test(rx, td);
871 #endif
872     }
873 
874     return g_test_run();
875 }
876