1 /* 2 * libqos driver framework 3 * 4 * Copyright (c) 2022-2023 Red Hat, Inc. 5 * Copyright (c) 2018 Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com> 6 * 7 * This library is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU Lesser General Public 9 * License version 2.1 as published by the Free Software Foundation. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/> 18 */ 19 20 #include "qemu/osdep.h" 21 #include "hw/net/igb_regs.h" 22 #include "hw/net/mii.h" 23 #include "hw/pci/pci_ids.h" 24 #include "../libqtest.h" 25 #include "pci-pc.h" 26 #include "qemu/sockets.h" 27 #include "qemu/iov.h" 28 #include "qemu/module.h" 29 #include "qemu/bitops.h" 30 #include "libqos-malloc.h" 31 #include "qgraph.h" 32 #include "e1000e.h" 33 34 #define IGB_IVAR_TEST_CFG \ 35 ((E1000E_RX0_MSG_ID | E1000_IVAR_VALID) << (igb_ivar_entry_rx(0) * 8) | \ 36 ((E1000E_TX0_MSG_ID | E1000_IVAR_VALID) << (igb_ivar_entry_tx(0) * 8))) 37 38 #define E1000E_RING_LEN (0x1000) 39 40 static void e1000e_foreach_callback(QPCIDevice *dev, int devfn, void *data) 41 { 42 QPCIDevice *res = data; 43 memcpy(res, dev, sizeof(QPCIDevice)); 44 g_free(dev); 45 } 46 47 static void e1000e_pci_destructor(QOSGraphObject *obj) 48 { 49 QE1000E_PCI *epci = (QE1000E_PCI *) obj; 50 qpci_iounmap(&epci->pci_dev, epci->mac_regs); 51 qpci_msix_disable(&epci->pci_dev); 52 } 53 54 static void igb_pci_start_hw(QOSGraphObject *obj) 55 { 56 static const uint8_t address[] = E1000E_ADDRESS; 57 QE1000E_PCI *d = (QE1000E_PCI *) obj; 58 uint32_t val; 59 60 /* Enable the device */ 61 qpci_device_enable(&d->pci_dev); 62 63 /* Reset the device */ 64 val = e1000e_macreg_read(&d->e1000e, E1000_CTRL); 65 e1000e_macreg_write(&d->e1000e, E1000_CTRL, val | E1000_CTRL_RST | E1000_CTRL_SLU); 66 67 /* Setup link */ 68 e1000e_macreg_write(&d->e1000e, E1000_MDIC, 69 MII_BMCR_AUTOEN | MII_BMCR_ANRESTART | 70 (MII_BMCR << E1000_MDIC_REG_SHIFT) | 71 (1 << E1000_MDIC_PHY_SHIFT) | 72 E1000_MDIC_OP_WRITE); 73 74 qtest_clock_step(d->pci_dev.bus->qts, 900000000); 75 76 /* Enable and configure MSI-X */ 77 qpci_msix_enable(&d->pci_dev); 78 e1000e_macreg_write(&d->e1000e, E1000_IVAR0, IGB_IVAR_TEST_CFG); 79 80 /* Check the device link status */ 81 val = e1000e_macreg_read(&d->e1000e, E1000_STATUS); 82 g_assert_cmphex(val & E1000_STATUS_LU, ==, E1000_STATUS_LU); 83 84 /* Initialize TX/RX logic */ 85 e1000e_macreg_write(&d->e1000e, E1000_RCTL, 0); 86 e1000e_macreg_write(&d->e1000e, E1000_TCTL, 0); 87 88 e1000e_macreg_write(&d->e1000e, E1000_TDBAL(0), 89 (uint32_t) d->e1000e.tx_ring); 90 e1000e_macreg_write(&d->e1000e, E1000_TDBAH(0), 91 (uint32_t) (d->e1000e.tx_ring >> 32)); 92 e1000e_macreg_write(&d->e1000e, E1000_TDLEN(0), E1000E_RING_LEN); 93 e1000e_macreg_write(&d->e1000e, E1000_TDT(0), 0); 94 e1000e_macreg_write(&d->e1000e, E1000_TDH(0), 0); 95 96 /* Enable transmit */ 97 e1000e_macreg_write(&d->e1000e, E1000_TCTL, E1000_TCTL_EN); 98 99 e1000e_macreg_write(&d->e1000e, E1000_RDBAL(0), 100 (uint32_t)d->e1000e.rx_ring); 101 e1000e_macreg_write(&d->e1000e, E1000_RDBAH(0), 102 (uint32_t)(d->e1000e.rx_ring >> 32)); 103 e1000e_macreg_write(&d->e1000e, E1000_RDLEN(0), E1000E_RING_LEN); 104 e1000e_macreg_write(&d->e1000e, E1000_RDT(0), 0); 105 e1000e_macreg_write(&d->e1000e, E1000_RDH(0), 0); 106 e1000e_macreg_write(&d->e1000e, E1000_RA, 107 le32_to_cpu(*(uint32_t *)address)); 108 e1000e_macreg_write(&d->e1000e, E1000_RA + 4, 109 E1000_RAH_AV | E1000_RAH_POOL_1 | 110 le16_to_cpu(*(uint16_t *)(address + 4))); 111 112 /* Enable receive */ 113 e1000e_macreg_write(&d->e1000e, E1000_RFCTL, E1000_RFCTL_EXTEN); 114 e1000e_macreg_write(&d->e1000e, E1000_RCTL, E1000_RCTL_EN); 115 116 /* Enable all interrupts */ 117 e1000e_macreg_write(&d->e1000e, E1000_IMS, 0xFFFFFFFF); 118 e1000e_macreg_write(&d->e1000e, E1000_EIMS, 0xFFFFFFFF); 119 120 } 121 122 static void *igb_pci_get_driver(void *obj, const char *interface) 123 { 124 QE1000E_PCI *epci = obj; 125 if (!g_strcmp0(interface, "igb-if")) { 126 return &epci->e1000e; 127 } 128 129 /* implicit contains */ 130 if (!g_strcmp0(interface, "pci-device")) { 131 return &epci->pci_dev; 132 } 133 134 fprintf(stderr, "%s not present in igb\n", interface); 135 g_assert_not_reached(); 136 } 137 138 static void *igb_pci_create(void *pci_bus, QGuestAllocator *alloc, void *addr) 139 { 140 QE1000E_PCI *d = g_new0(QE1000E_PCI, 1); 141 QPCIBus *bus = pci_bus; 142 QPCIAddress *address = addr; 143 144 qpci_device_foreach(bus, address->vendor_id, address->device_id, 145 e1000e_foreach_callback, &d->pci_dev); 146 147 /* Map BAR0 (mac registers) */ 148 d->mac_regs = qpci_iomap(&d->pci_dev, 0, NULL); 149 150 /* Allocate and setup TX ring */ 151 d->e1000e.tx_ring = guest_alloc(alloc, E1000E_RING_LEN); 152 g_assert(d->e1000e.tx_ring != 0); 153 154 /* Allocate and setup RX ring */ 155 d->e1000e.rx_ring = guest_alloc(alloc, E1000E_RING_LEN); 156 g_assert(d->e1000e.rx_ring != 0); 157 158 d->obj.get_driver = igb_pci_get_driver; 159 d->obj.start_hw = igb_pci_start_hw; 160 d->obj.destructor = e1000e_pci_destructor; 161 162 return &d->obj; 163 } 164 165 static void igb_register_nodes(void) 166 { 167 QPCIAddress addr = { 168 .vendor_id = PCI_VENDOR_ID_INTEL, 169 .device_id = E1000_DEV_ID_82576, 170 }; 171 172 /* 173 * FIXME: every test using this node needs to setup a -netdev socket,id=hs0 174 * otherwise QEMU is not going to start 175 */ 176 QOSGraphEdgeOptions opts = { 177 .extra_device_opts = "netdev=hs0", 178 }; 179 add_qpci_address(&opts, &addr); 180 181 qos_node_create_driver("igb", igb_pci_create); 182 qos_node_consumes("igb", "pci-bus", &opts); 183 } 184 185 libqos_init(igb_register_nodes); 186