xref: /openbmc/qemu/tests/qtest/libqos/igb.c (revision 4921d0a7)
1 /*
2  * libqos driver framework
3  *
4  * Copyright (c) 2022-2023 Red Hat, Inc.
5  * Copyright (c) 2018 Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
6  *
7  * This library is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU Lesser General Public
9  * License version 2.1 as published by the Free Software Foundation.
10  *
11  * This library is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
14  * Lesser General Public License for more details.
15  *
16  * You should have received a copy of the GNU Lesser General Public
17  * License along with this library; if not, see <http://www.gnu.org/licenses/>
18  */
19 
20 #include "qemu/osdep.h"
21 #include "hw/net/igb_regs.h"
22 #include "hw/net/mii.h"
23 #include "hw/pci/pci_ids.h"
24 #include "../libqtest.h"
25 #include "pci-pc.h"
26 #include "qemu/sockets.h"
27 #include "qemu/iov.h"
28 #include "qemu/module.h"
29 #include "qemu/bitops.h"
30 #include "libqos-malloc.h"
31 #include "qgraph.h"
32 #include "e1000e.h"
33 
34 #define IGB_IVAR_TEST_CFG \
35     ((E1000E_RX0_MSG_ID | E1000_IVAR_VALID) << (igb_ivar_entry_rx(0) * 8)   | \
36      ((E1000E_TX0_MSG_ID | E1000_IVAR_VALID) << (igb_ivar_entry_tx(0) * 8)))
37 
38 #define E1000E_RING_LEN (0x1000)
39 
40 static void e1000e_foreach_callback(QPCIDevice *dev, int devfn, void *data)
41 {
42     QPCIDevice *res = data;
43     memcpy(res, dev, sizeof(QPCIDevice));
44     g_free(dev);
45 }
46 
47 static void e1000e_pci_destructor(QOSGraphObject *obj)
48 {
49     QE1000E_PCI *epci = (QE1000E_PCI *) obj;
50     qpci_iounmap(&epci->pci_dev, epci->mac_regs);
51     qpci_msix_disable(&epci->pci_dev);
52 }
53 
54 static void igb_pci_start_hw(QOSGraphObject *obj)
55 {
56     static const uint8_t address[] = E1000E_ADDRESS;
57     QE1000E_PCI *d = (QE1000E_PCI *) obj;
58     uint32_t val;
59 
60     /* Enable the device */
61     qpci_device_enable(&d->pci_dev);
62 
63     /* Reset the device */
64     val = e1000e_macreg_read(&d->e1000e, E1000_CTRL);
65     e1000e_macreg_write(&d->e1000e, E1000_CTRL, val | E1000_CTRL_RST | E1000_CTRL_SLU);
66 
67     /* Setup link */
68     e1000e_macreg_write(&d->e1000e, E1000_MDIC,
69                         MII_BMCR_AUTOEN | MII_BMCR_ANRESTART |
70                         (MII_BMCR << E1000_MDIC_REG_SHIFT) |
71                         (1 << E1000_MDIC_PHY_SHIFT) |
72                         E1000_MDIC_OP_WRITE);
73 
74     qtest_clock_step(d->pci_dev.bus->qts, 900000000);
75 
76     /* Enable and configure MSI-X */
77     qpci_msix_enable(&d->pci_dev);
78     e1000e_macreg_write(&d->e1000e, E1000_IVAR0, IGB_IVAR_TEST_CFG);
79 
80     /* Check the device link status */
81     val = e1000e_macreg_read(&d->e1000e, E1000_STATUS);
82     g_assert_cmphex(val & E1000_STATUS_LU, ==, E1000_STATUS_LU);
83 
84     /* Initialize TX/RX logic */
85     e1000e_macreg_write(&d->e1000e, E1000_RCTL, 0);
86     e1000e_macreg_write(&d->e1000e, E1000_TCTL, 0);
87 
88     e1000e_macreg_write(&d->e1000e, E1000_TDBAL(0),
89                            (uint32_t) d->e1000e.tx_ring);
90     e1000e_macreg_write(&d->e1000e, E1000_TDBAH(0),
91                            (uint32_t) (d->e1000e.tx_ring >> 32));
92     e1000e_macreg_write(&d->e1000e, E1000_TDLEN(0), E1000E_RING_LEN);
93     e1000e_macreg_write(&d->e1000e, E1000_TDT(0), 0);
94     e1000e_macreg_write(&d->e1000e, E1000_TDH(0), 0);
95 
96     /* Enable transmit */
97     e1000e_macreg_write(&d->e1000e, E1000_TCTL, E1000_TCTL_EN);
98 
99     e1000e_macreg_write(&d->e1000e, E1000_RDBAL(0),
100                            (uint32_t)d->e1000e.rx_ring);
101     e1000e_macreg_write(&d->e1000e, E1000_RDBAH(0),
102                            (uint32_t)(d->e1000e.rx_ring >> 32));
103     e1000e_macreg_write(&d->e1000e, E1000_RDLEN(0), E1000E_RING_LEN);
104     e1000e_macreg_write(&d->e1000e, E1000_RDT(0), 0);
105     e1000e_macreg_write(&d->e1000e, E1000_RDH(0), 0);
106     e1000e_macreg_write(&d->e1000e, E1000_RA,
107                         le32_to_cpu(*(uint32_t *)address));
108     e1000e_macreg_write(&d->e1000e, E1000_RA + 4,
109                         E1000_RAH_AV | E1000_RAH_POOL_1 |
110                         le16_to_cpu(*(uint16_t *)(address + 4)));
111 
112     /* Set supported receive descriptor mode */
113     e1000e_macreg_write(&d->e1000e,
114                         E1000_SRRCTL(0),
115                         E1000_SRRCTL_DESCTYPE_ADV_ONEBUF);
116 
117     /* Enable receive */
118     e1000e_macreg_write(&d->e1000e, E1000_RFCTL, E1000_RFCTL_EXTEN);
119     e1000e_macreg_write(&d->e1000e, E1000_RCTL, E1000_RCTL_EN);
120 
121     /* Enable all interrupts */
122     e1000e_macreg_write(&d->e1000e, E1000_GPIE,  E1000_GPIE_MSIX_MODE);
123     e1000e_macreg_write(&d->e1000e, E1000_IMS,  0xFFFFFFFF);
124     e1000e_macreg_write(&d->e1000e, E1000_EIMS, 0xFFFFFFFF);
125 
126 }
127 
128 static void *igb_pci_get_driver(void *obj, const char *interface)
129 {
130     QE1000E_PCI *epci = obj;
131     if (!g_strcmp0(interface, "igb-if")) {
132         return &epci->e1000e;
133     }
134 
135     /* implicit contains */
136     if (!g_strcmp0(interface, "pci-device")) {
137         return &epci->pci_dev;
138     }
139 
140     fprintf(stderr, "%s not present in igb\n", interface);
141     g_assert_not_reached();
142 }
143 
144 static void *igb_pci_create(void *pci_bus, QGuestAllocator *alloc, void *addr)
145 {
146     QE1000E_PCI *d = g_new0(QE1000E_PCI, 1);
147     QPCIBus *bus = pci_bus;
148     QPCIAddress *address = addr;
149 
150     qpci_device_foreach(bus, address->vendor_id, address->device_id,
151                         e1000e_foreach_callback, &d->pci_dev);
152 
153     /* Map BAR0 (mac registers) */
154     d->mac_regs = qpci_iomap(&d->pci_dev, 0, NULL);
155 
156     /* Allocate and setup TX ring */
157     d->e1000e.tx_ring = guest_alloc(alloc, E1000E_RING_LEN);
158     g_assert(d->e1000e.tx_ring != 0);
159 
160     /* Allocate and setup RX ring */
161     d->e1000e.rx_ring = guest_alloc(alloc, E1000E_RING_LEN);
162     g_assert(d->e1000e.rx_ring != 0);
163 
164     d->obj.get_driver = igb_pci_get_driver;
165     d->obj.start_hw = igb_pci_start_hw;
166     d->obj.destructor = e1000e_pci_destructor;
167 
168     return &d->obj;
169 }
170 
171 static void igb_register_nodes(void)
172 {
173     QPCIAddress addr = {
174         .vendor_id = PCI_VENDOR_ID_INTEL,
175         .device_id = E1000_DEV_ID_82576,
176     };
177 
178     /*
179      * FIXME: every test using this node needs to setup a -netdev socket,id=hs0
180      * otherwise QEMU is not going to start
181      */
182     QOSGraphEdgeOptions opts = {
183         .extra_device_opts = "netdev=hs0",
184     };
185     add_qpci_address(&opts, &addr);
186 
187     qos_node_create_driver("igb", igb_pci_create);
188     qos_node_consumes("igb", "pci-bus", &opts);
189 }
190 
191 libqos_init(igb_register_nodes);
192