1 /* 2 * libqos driver framework 3 * 4 * Copyright (c) 2018 Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com> 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License version 2 as published by the Free Software Foundation. 9 * 10 * This library is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 * Lesser General Public License for more details. 14 * 15 * You should have received a copy of the GNU Lesser General Public 16 * License along with this library; if not, see <http://www.gnu.org/licenses/> 17 */ 18 19 #include "qemu/osdep.h" 20 #include "libqtest.h" 21 #include "libqos/pci-pc.h" 22 #include "qemu/sockets.h" 23 #include "qemu/iov.h" 24 #include "qemu/module.h" 25 #include "qemu/bitops.h" 26 #include "libqos/malloc.h" 27 #include "libqos/qgraph.h" 28 #include "e1000e.h" 29 30 #define E1000E_IMS (0x00d0) 31 32 #define E1000E_STATUS (0x0008) 33 #define E1000E_STATUS_LU BIT(1) 34 #define E1000E_STATUS_ASDV1000 BIT(9) 35 36 #define E1000E_CTRL (0x0000) 37 #define E1000E_CTRL_RESET BIT(26) 38 39 #define E1000E_RCTL (0x0100) 40 #define E1000E_RCTL_EN BIT(1) 41 #define E1000E_RCTL_UPE BIT(3) 42 #define E1000E_RCTL_MPE BIT(4) 43 44 #define E1000E_RFCTL (0x5008) 45 #define E1000E_RFCTL_EXTEN BIT(15) 46 47 #define E1000E_TCTL (0x0400) 48 #define E1000E_TCTL_EN BIT(1) 49 50 #define E1000E_CTRL_EXT (0x0018) 51 #define E1000E_CTRL_EXT_DRV_LOAD BIT(28) 52 #define E1000E_CTRL_EXT_TXLSFLOW BIT(22) 53 54 #define E1000E_IVAR (0x00E4) 55 #define E1000E_IVAR_TEST_CFG ((E1000E_RX0_MSG_ID << 0) | BIT(3) | \ 56 (E1000E_TX0_MSG_ID << 8) | BIT(11) | \ 57 (E1000E_OTHER_MSG_ID << 16) | BIT(19) | \ 58 BIT(31)) 59 60 #define E1000E_RING_LEN (0x1000) 61 62 #define E1000E_TDBAL (0x3800) 63 64 #define E1000E_TDBAH (0x3804) 65 #define E1000E_TDH (0x3810) 66 67 #define E1000E_RDBAL (0x2800) 68 #define E1000E_RDBAH (0x2804) 69 #define E1000E_RDH (0x2810) 70 71 #define E1000E_TXD_LEN (16) 72 #define E1000E_RXD_LEN (16) 73 74 static void e1000e_macreg_write(QE1000E *d, uint32_t reg, uint32_t val) 75 { 76 QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e); 77 qpci_io_writel(&d_pci->pci_dev, d_pci->mac_regs, reg, val); 78 } 79 80 static uint32_t e1000e_macreg_read(QE1000E *d, uint32_t reg) 81 { 82 QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e); 83 return qpci_io_readl(&d_pci->pci_dev, d_pci->mac_regs, reg); 84 } 85 86 void e1000e_tx_ring_push(QE1000E *d, void *descr) 87 { 88 QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e); 89 uint32_t tail = e1000e_macreg_read(d, E1000E_TDT); 90 uint32_t len = e1000e_macreg_read(d, E1000E_TDLEN) / E1000E_TXD_LEN; 91 92 qtest_memwrite(d_pci->pci_dev.bus->qts, d->tx_ring + tail * E1000E_TXD_LEN, 93 descr, E1000E_TXD_LEN); 94 e1000e_macreg_write(d, E1000E_TDT, (tail + 1) % len); 95 96 /* Read WB data for the packet transmitted */ 97 qtest_memread(d_pci->pci_dev.bus->qts, d->tx_ring + tail * E1000E_TXD_LEN, 98 descr, E1000E_TXD_LEN); 99 } 100 101 void e1000e_rx_ring_push(QE1000E *d, void *descr) 102 { 103 QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e); 104 uint32_t tail = e1000e_macreg_read(d, E1000E_RDT); 105 uint32_t len = e1000e_macreg_read(d, E1000E_RDLEN) / E1000E_RXD_LEN; 106 107 qtest_memwrite(d_pci->pci_dev.bus->qts, d->rx_ring + tail * E1000E_RXD_LEN, 108 descr, E1000E_RXD_LEN); 109 e1000e_macreg_write(d, E1000E_RDT, (tail + 1) % len); 110 111 /* Read WB data for the packet received */ 112 qtest_memread(d_pci->pci_dev.bus->qts, d->rx_ring + tail * E1000E_RXD_LEN, 113 descr, E1000E_RXD_LEN); 114 } 115 116 static void e1000e_foreach_callback(QPCIDevice *dev, int devfn, void *data) 117 { 118 QPCIDevice *res = data; 119 memcpy(res, dev, sizeof(QPCIDevice)); 120 g_free(dev); 121 } 122 123 void e1000e_wait_isr(QE1000E *d, uint16_t msg_id) 124 { 125 QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e); 126 guint64 end_time = g_get_monotonic_time() + 5 * G_TIME_SPAN_SECOND; 127 128 do { 129 if (qpci_msix_pending(&d_pci->pci_dev, msg_id)) { 130 return; 131 } 132 qtest_clock_step(d_pci->pci_dev.bus->qts, 10000); 133 } while (g_get_monotonic_time() < end_time); 134 135 g_error("Timeout expired"); 136 } 137 138 static void e1000e_pci_destructor(QOSGraphObject *obj) 139 { 140 QE1000E_PCI *epci = (QE1000E_PCI *) obj; 141 qpci_iounmap(&epci->pci_dev, epci->mac_regs); 142 qpci_msix_disable(&epci->pci_dev); 143 } 144 145 static void e1000e_pci_start_hw(QOSGraphObject *obj) 146 { 147 QE1000E_PCI *d = (QE1000E_PCI *) obj; 148 uint32_t val; 149 150 /* Enable the device */ 151 qpci_device_enable(&d->pci_dev); 152 153 /* Reset the device */ 154 val = e1000e_macreg_read(&d->e1000e, E1000E_CTRL); 155 e1000e_macreg_write(&d->e1000e, E1000E_CTRL, val | E1000E_CTRL_RESET); 156 157 /* Enable and configure MSI-X */ 158 qpci_msix_enable(&d->pci_dev); 159 e1000e_macreg_write(&d->e1000e, E1000E_IVAR, E1000E_IVAR_TEST_CFG); 160 161 /* Check the device status - link and speed */ 162 val = e1000e_macreg_read(&d->e1000e, E1000E_STATUS); 163 g_assert_cmphex(val & (E1000E_STATUS_LU | E1000E_STATUS_ASDV1000), 164 ==, E1000E_STATUS_LU | E1000E_STATUS_ASDV1000); 165 166 /* Initialize TX/RX logic */ 167 e1000e_macreg_write(&d->e1000e, E1000E_RCTL, 0); 168 e1000e_macreg_write(&d->e1000e, E1000E_TCTL, 0); 169 170 /* Notify the device that the driver is ready */ 171 val = e1000e_macreg_read(&d->e1000e, E1000E_CTRL_EXT); 172 e1000e_macreg_write(&d->e1000e, E1000E_CTRL_EXT, 173 val | E1000E_CTRL_EXT_DRV_LOAD | E1000E_CTRL_EXT_TXLSFLOW); 174 175 e1000e_macreg_write(&d->e1000e, E1000E_TDBAL, 176 (uint32_t) d->e1000e.tx_ring); 177 e1000e_macreg_write(&d->e1000e, E1000E_TDBAH, 178 (uint32_t) (d->e1000e.tx_ring >> 32)); 179 e1000e_macreg_write(&d->e1000e, E1000E_TDLEN, E1000E_RING_LEN); 180 e1000e_macreg_write(&d->e1000e, E1000E_TDT, 0); 181 e1000e_macreg_write(&d->e1000e, E1000E_TDH, 0); 182 183 /* Enable transmit */ 184 e1000e_macreg_write(&d->e1000e, E1000E_TCTL, E1000E_TCTL_EN); 185 e1000e_macreg_write(&d->e1000e, E1000E_RDBAL, 186 (uint32_t)d->e1000e.rx_ring); 187 e1000e_macreg_write(&d->e1000e, E1000E_RDBAH, 188 (uint32_t)(d->e1000e.rx_ring >> 32)); 189 e1000e_macreg_write(&d->e1000e, E1000E_RDLEN, E1000E_RING_LEN); 190 e1000e_macreg_write(&d->e1000e, E1000E_RDT, 0); 191 e1000e_macreg_write(&d->e1000e, E1000E_RDH, 0); 192 193 /* Enable receive */ 194 e1000e_macreg_write(&d->e1000e, E1000E_RFCTL, E1000E_RFCTL_EXTEN); 195 e1000e_macreg_write(&d->e1000e, E1000E_RCTL, E1000E_RCTL_EN | 196 E1000E_RCTL_UPE | 197 E1000E_RCTL_MPE); 198 199 /* Enable all interrupts */ 200 e1000e_macreg_write(&d->e1000e, E1000E_IMS, 0xFFFFFFFF); 201 202 } 203 204 static void *e1000e_pci_get_driver(void *obj, const char *interface) 205 { 206 QE1000E_PCI *epci = obj; 207 if (!g_strcmp0(interface, "e1000e-if")) { 208 return &epci->e1000e; 209 } 210 211 /* implicit contains */ 212 if (!g_strcmp0(interface, "pci-device")) { 213 return &epci->pci_dev; 214 } 215 216 fprintf(stderr, "%s not present in e1000e\n", interface); 217 g_assert_not_reached(); 218 } 219 220 static void *e1000e_pci_create(void *pci_bus, QGuestAllocator *alloc, 221 void *addr) 222 { 223 QE1000E_PCI *d = g_new0(QE1000E_PCI, 1); 224 QPCIBus *bus = pci_bus; 225 QPCIAddress *address = addr; 226 227 qpci_device_foreach(bus, address->vendor_id, address->device_id, 228 e1000e_foreach_callback, &d->pci_dev); 229 230 /* Map BAR0 (mac registers) */ 231 d->mac_regs = qpci_iomap(&d->pci_dev, 0, NULL); 232 233 /* Allocate and setup TX ring */ 234 d->e1000e.tx_ring = guest_alloc(alloc, E1000E_RING_LEN); 235 g_assert(d->e1000e.tx_ring != 0); 236 237 /* Allocate and setup RX ring */ 238 d->e1000e.rx_ring = guest_alloc(alloc, E1000E_RING_LEN); 239 g_assert(d->e1000e.rx_ring != 0); 240 241 d->obj.get_driver = e1000e_pci_get_driver; 242 d->obj.start_hw = e1000e_pci_start_hw; 243 d->obj.destructor = e1000e_pci_destructor; 244 245 return &d->obj; 246 } 247 248 static void e1000e_register_nodes(void) 249 { 250 QPCIAddress addr = { 251 .vendor_id = 0x8086, 252 .device_id = 0x10D3, 253 }; 254 255 /* FIXME: every test using this node needs to setup a -netdev socket,id=hs0 256 * otherwise QEMU is not going to start */ 257 QOSGraphEdgeOptions opts = { 258 .extra_device_opts = "netdev=hs0", 259 }; 260 add_qpci_address(&opts, &addr); 261 262 qos_node_create_driver("e1000e", e1000e_pci_create); 263 qos_node_consumes("e1000e", "pci-bus", &opts); 264 } 265 266 libqos_init(e1000e_register_nodes); 267