1#!/usr/bin/env bash
2#
3# Copyright (C) 2009 Red Hat, Inc.
4# Copyright (c) 2000-2001 Silicon Graphics, Inc.  All Rights Reserved.
5#
6# This program is free software; you can redistribute it and/or
7# modify it under the terms of the GNU General Public License as
8# published by the Free Software Foundation.
9#
10# This program is distributed in the hope that it would be useful,
11# but WITHOUT ANY WARRANTY; without even the implied warranty of
12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13# GNU General Public License for more details.
14#
15# You should have received a copy of the GNU General Public License
16# along with this program.  If not, see <http://www.gnu.org/licenses/>.
17#
18#
19# standard filters
20#
21
22_filter_date()
23{
24    sed -Ee 's/[0-9]{4}-[0-9]{2}-[0-9]{2} [0-9]{2}:[0-9]{2}:[0-9]{2}/yyyy-mm-dd hh:mm:ss/'
25}
26
27_filter_vmstate_size()
28{
29    sed -E -e 's/[0-9. ]{5} [KMGT]iB/     SIZE/' \
30           -e 's/[0-9. ]{5} B/   SIZE/'
31}
32
33_filter_generated_node_ids()
34{
35    sed -Ee 's/\#block[0-9]{3,}/NODE_NAME/'
36}
37
38_filter_qom_path()
39{
40    gsed -e '/Attached to:/s/\device[[0-9]\+\]/device[N]/g'
41}
42
43# replace occurrences of the actual TEST_DIR value with TEST_DIR
44_filter_testdir()
45{
46    sed -e "s#$TEST_DIR/#TEST_DIR/#g" \
47        -e "s#$SOCK_DIR/#SOCK_DIR/#g" \
48        -e "s#SOCK_DIR/fuse-#TEST_DIR/#g"
49}
50
51# replace occurrences of the actual IMGFMT value with IMGFMT
52_filter_imgfmt()
53{
54    sed -e "s#$IMGFMT#IMGFMT#g"
55}
56
57# Replace error message when the format is not supported and delete
58# the output lines after the first one
59_filter_qemu_img_check()
60{
61    gsed -e '/allocated.*fragmented.*compressed clusters/d' \
62        -e 's/qemu-img: This image format does not support checks/No errors were found on the image./' \
63        -e '/Image end offset: [0-9]\+/d'
64}
65
66# Removes \r from messages
67_filter_win32()
68{
69    gsed -e 's/\r//g'
70}
71
72# sanitize qemu-io output
73_filter_qemu_io()
74{
75    _filter_win32 | \
76    gsed -e "s/[0-9]* ops\; [0-9/:. sec]* ([0-9/.inf]* [EPTGMKiBbytes]*\/sec and [0-9/.inf]* ops\/sec)/X ops\; XX:XX:XX.X (XXX YYY\/sec and XXX ops\/sec)/" \
77        -e "s/: line [0-9][0-9]*:  *[0-9][0-9]*\( Aborted\| Killed\)/:\1/" \
78        -e "s/qemu-io> //g"
79}
80
81# replace occurrences of QEMU_PROG with "qemu"
82_filter_qemu()
83{
84    gsed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
85        -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#' \
86        -e $'s#\r##' # QEMU monitor uses \r\n line endings
87}
88
89# replace problematic QMP output like timestamps
90_filter_qmp()
91{
92    _filter_win32 | \
93    gsed -e 's#\("\(micro\)\?seconds": \)[0-9]\+#\1 TIMESTAMP#g' \
94        -e 's#^{"QMP":.*}$#QMP_VERSION#' \
95        -e '/^    "QMP": {\s*$/, /^    }\s*$/ c\' \
96        -e '    QMP_VERSION'
97}
98
99# readline makes HMP command strings so long that git complains
100_filter_hmp()
101{
102    gsed -e $'s/^\\((qemu) \\)\\?.*\e\\[D/\\1/g' \
103        -e $'s/\e\\[K//g'
104}
105
106# replace block job offset
107_filter_block_job_offset()
108{
109    sed -e 's/, "offset": [0-9]\+,/, "offset": OFFSET,/'
110}
111
112# replace block job len
113_filter_block_job_len()
114{
115    sed -e 's/, "len": [0-9]\+,/, "len": LEN,/g'
116}
117
118# replace actual image size (depends on the host filesystem)
119_filter_actual_image_size()
120{
121    gsed -s 's/\("actual-size":\s*\)[0-9]\+/\1SIZE/g'
122}
123
124# Filename filters for qemu-img create
125_filter_img_create_filenames()
126{
127    sed \
128        -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
129        -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
130        -e "s#$TEST_DIR#TEST_DIR#g" \
131        -e "s#$SOCK_DIR#SOCK_DIR#g" \
132        -e 's#SOCK_DIR/fuse-#TEST_DIR/#g' \
133        -e "s#$IMGFMT#IMGFMT#g" \
134        -e 's#nbd:127.0.0.1:[0-9]\\+#TEST_DIR/t.IMGFMT#g' \
135        -e 's#nbd+unix:///\??socket=SOCK_DIR/nbd#TEST_DIR/t.IMGFMT#g'
136}
137
138# replace driver-specific options in the "Formatting..." line
139_do_filter_img_create()
140{
141    # Split the line into the pre-options part ($filename_part, which
142    # precedes ", fmt=") and the options part ($options, which starts
143    # with "fmt=")
144    # (And just echo everything before the first "^Formatting")
145    readarray formatting_line < <(gsed -e 's/, fmt=/\n/')
146
147    filename_part=${formatting_line[0]}
148    unset formatting_line[0]
149
150    options="fmt=${formatting_line[@]}"
151
152    # Set grep_data_file to '\|data_file' to keep it; make it empty
153    # to drop it.
154    # We want to drop it if it is part of the global $IMGOPTS, and we
155    # want to keep it otherwise (if the test specifically wants to
156    # test data files).
157    grep_data_file=(-e data_file)
158    if _get_data_file "$TEST_IMG" > /dev/null; then
159        grep_data_file=()
160    fi
161
162    filename_part=$(echo "$filename_part" | _filter_img_create_filenames)
163
164    # Break the option line before each option (preserving pre-existing
165    # line breaks by replacing them by \0 and restoring them at the end),
166    # then filter out the options we want to keep and sort them according
167    # to some order that all block drivers used at the time of writing
168    # this function.
169    options=$(
170        echo "$options" \
171        | tr '\n' '\0' \
172        | gsed -e 's/ \([a-z0-9_.-]*\)=/\n\1=/g' \
173        | grep -a -e '^fmt' -e '^size' -e '^backing' -e '^preallocation' \
174                  -e '^encryption' "${grep_data_file[@]}" \
175        | _filter_img_create_filenames \
176        | sed \
177            -e 's/^\(fmt\)/0-\1/' \
178            -e 's/^\(size\)/1-\1/' \
179            -e 's/^\(backing\)/2-\1/' \
180            -e 's/^\(data_file\)/3-\1/' \
181            -e 's/^\(encryption\)/4-\1/' \
182            -e 's/^\(preallocation\)/8-\1/' \
183        | LC_ALL=C sort \
184        | sed -e 's/^[0-9]-//' \
185        | tr '\n\0' ' \n' \
186        | sed -e 's/^ *$//' -e 's/ *$//'
187    )
188
189    if [ -n "$options" ]; then
190        echo "$filename_part, $options"
191    elif [ -n "$filename_part" ]; then
192        echo "$filename_part"
193    fi
194}
195
196# Filter qemu-img create output:
197# Pipe all ^Formatting lines through _do_filter_img_create, and all
198# other lines through _filter_img_create_filenames
199_filter_img_create()
200{
201    while read -r line; do
202        if echo "$line" | grep -q '^Formatting'; then
203            echo "$line" | _do_filter_img_create
204        else
205            echo "$line" | _filter_img_create_filenames
206        fi
207    done
208}
209
210_filter_img_create_size()
211{
212    gsed -e "s# size=[0-9]\\+# size=SIZE#g"
213}
214
215_filter_img_info()
216{
217    if [[ "$1" == "--format-specific" ]]; then
218        local format_specific=1
219        shift
220    else
221        local format_specific=0
222    fi
223
224    discard=0
225    regex_json_spec_start='^ *"format-specific": \{'
226    gsed -e "s#$REMOTE_TEST_DIR#TEST_DIR#g" \
227        -e "s#$IMGPROTO:$TEST_DIR#TEST_DIR#g" \
228        -e "s#$TEST_DIR#TEST_DIR#g" \
229        -e "s#$SOCK_DIR#SOCK_DIR#g" \
230        -e "s#$IMGFMT#IMGFMT#g" \
231        -e 's#nbd://127.0.0.1:[0-9]\\+$#TEST_DIR/t.IMGFMT#g' \
232        -e 's#nbd+unix:///\??socket=SOCK_DIR/nbd#TEST_DIR/t.IMGFMT#g' \
233        -e 's#SOCK_DIR/fuse-#TEST_DIR/#g' \
234        -e "/encrypted: yes/d" \
235        -e "/cluster_size: [0-9]\\+/d" \
236        -e "/table_size: [0-9]\\+/d" \
237        -e "/compat: '[^']*'/d" \
238        -e "/compat6: \\(on\\|off\\)/d" \
239        -e "s/cid: [0-9]\+/cid: XXXXXXXXXX/" \
240        -e "/static: \\(on\\|off\\)/d" \
241        -e "/zeroed_grain: \\(on\\|off\\)/d" \
242        -e "/subformat: '[^']*'/d" \
243        -e "/adapter_type: '[^']*'/d" \
244        -e "/hwversion: '[^']*'/d" \
245        -e "/lazy_refcounts: \\(on\\|off\\)/d" \
246        -e "/extended_l2=\\(on\\|off\\)/d" \
247        -e "/block_size: [0-9]\\+/d" \
248        -e "/block_state_zero: \\(on\\|off\\)/d" \
249        -e "/log_size: [0-9]\\+/d" \
250        -e "s/iters: [0-9]\\+/iters: 1024/" \
251        -e 's/\(compression type: \)\(zlib\|zstd\)/\1COMPRESSION_TYPE/' \
252        -e "s/uuid: [-a-f0-9]\\+/uuid: 00000000-0000-0000-0000-000000000000/" | \
253    while IFS='' read -r line; do
254        if [[ $format_specific == 1 ]]; then
255            discard=0
256        elif [[ $line == "Format specific information:" ]]; then
257            discard=1
258        elif [[ $line =~ $regex_json_spec_start ]]; then
259            discard=2
260            regex_json_spec_end="^${line%%[^ ]*}\\},? *$"
261        fi
262        if [[ $discard == 0 ]]; then
263            echo "$line"
264        elif [[ $discard == 1 && ! $line ]]; then
265            echo
266            discard=0
267        elif [[ $discard == 2 && $line =~ $regex_json_spec_end ]]; then
268            discard=0
269        fi
270    done
271}
272
273# filter out offsets and file names from qemu-img map; good for both
274# human and json output
275_filter_qemu_img_map()
276{
277    # Assuming the data_file value in $IMGOPTS contains a '$TEST_IMG',
278    # create a filter that replaces the data file name by $TEST_IMG.
279    # Example:
280    #   In $IMGOPTS: 'data_file=$TEST_IMG.data_file'
281    #   Then data_file_pattern == '\(.*\).data_file'
282    #   And  data_file_filter  == -e 's#\(.*\).data_file#\1#
283    data_file_filter=()
284    if data_file_pattern=$(_get_data_file '\\(.*\\)'); then
285        data_file_filter=(-e "s#$data_file_pattern#\\1#")
286    fi
287
288    sed -e 's/\([0-9a-fx]* *[0-9a-fx]* *\)[0-9a-fx]* */\1/g' \
289        -e 's/"offset": [0-9]\+/"offset": OFFSET/g' \
290        -e 's/Mapped to *//' \
291        "${data_file_filter[@]}" \
292        | _filter_testdir | _filter_imgfmt
293}
294
295_filter_nbd()
296{
297    # nbd.c error messages contain function names and line numbers that are
298    # prone to change.  Message ordering depends on timing between send and
299    # receive callbacks sometimes, making them unreliable.
300    #
301    # Filter out the TCP port number since this changes between runs.
302    sed -e '/nbd\/.*\.c:/d' \
303        -e 's#127\.0\.0\.1:[0-9]*#127.0.0.1:PORT#g' \
304        -e "s#?socket=$SOCK_DIR#?socket=SOCK_DIR#g" \
305        -e 's#\(foo\|PORT/\?\|.sock\): Failed to .*$#\1#'
306}
307
308_filter_qmp_empty_return()
309{
310    grep -v '{"return": {}}'
311}
312
313_filter_json_filename()
314{
315    $PYTHON -c 'import sys
316result, *fnames = sys.stdin.read().split("json:{")
317depth = 0
318for fname in fnames:
319    depth += 1 # For the opening brace in the split separator
320    for chr_i, chr in enumerate(fname):
321        if chr == "{":
322            depth += 1
323        elif chr == "}":
324            depth -= 1
325            if depth == 0:
326                break
327
328    # json:{} filenames may be nested; filter out everything from
329    # inside the outermost one
330    if depth == 0:
331        chr_i += 1 # First character past the filename
332        result += "json:{ /* filtered */ }" + fname[chr_i:]
333
334sys.stdout.write(result)'
335}
336
337_filter_authz_check_tls()
338{
339    sed -e 's/TLS x509 authz check for .* is denied/TLS x509 authz check for DISTINGUISHED-NAME is denied/'
340}
341
342_filter_qcow2_compression_type_bit()
343{
344    gsed -e 's/\(incompatible_features\s\+\)\[3\(, \)\?/\1[/' \
345        -e 's/\(incompatible_features.*\), 3\]/\1]/' \
346        -e 's/\(incompatible_features.*\), 3\(,.*\)/\1\2/'
347}
348
349# make sure this script returns success
350true
351