1#!/usr/bin/env bash 2# group: rw 3# 4# Test cases for different refcount_bits values 5# 6# Copyright (C) 2015 Red Hat, Inc. 7# 8# This program is free software; you can redistribute it and/or modify 9# it under the terms of the GNU General Public License as published by 10# the Free Software Foundation; either version 2 of the License, or 11# (at your option) any later version. 12# 13# This program is distributed in the hope that it will be useful, 14# but WITHOUT ANY WARRANTY; without even the implied warranty of 15# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16# GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License 19# along with this program. If not, see <http://www.gnu.org/licenses/>. 20# 21 22# creator 23owner=hreitz@redhat.com 24 25seq="$(basename $0)" 26echo "QA output created by $seq" 27 28status=1 # failure is the default! 29 30_cleanup() 31{ 32 _cleanup_test_img 33} 34trap "_cleanup; exit \$status" 0 1 2 3 15 35 36# get standard environment, filters and checks 37. ./common.rc 38. ./common.filter 39 40# This tests qcow2-specific low-level functionality 41_supported_fmt qcow2 42_supported_proto file fuse 43# This test will set refcount_bits on its own which would conflict with the 44# manual setting; compat will be overridden as well; 45# and external data files do not work well with our refcount testing 46# also, compression type is not supported with compat=0.10 used in test 47_unsupported_imgopts refcount_bits 'compat=0.10' data_file compression_type 48 49print_refcount_bits() 50{ 51 $QEMU_IMG info "$TEST_IMG" | sed -n '/refcount bits:/ s/^ *//p' 52} 53 54echo 55echo '=== refcount_bits limits ===' 56echo 57 58# Must be positive (non-zero) 59_make_test_img -o "refcount_bits=0" 64M 60# Must be positive (non-negative) 61_make_test_img -o "refcount_bits=-1" 64M 62# May not exceed 64 63_make_test_img -o "refcount_bits=128" 64M 64# Must be a power of two 65_make_test_img -o "refcount_bits=42" 64M 66 67# 1 is the minimum 68_make_test_img -o "refcount_bits=1" 64M 69print_refcount_bits 70 71# 64 is the maximum 72_make_test_img -o "refcount_bits=64" 64M 73print_refcount_bits 74 75# 16 is the default 76_make_test_img 64M 77print_refcount_bits 78 79echo 80echo '=== refcount_bits and compat=0.10 ===' 81echo 82 83# Should work 84_make_test_img -o "compat=0.10,refcount_bits=16" 64M 85print_refcount_bits 86 87# Should not work 88_make_test_img -o "compat=0.10,refcount_bits=1" 64M 89_make_test_img -o "compat=0.10,refcount_bits=64" 64M 90 91 92echo 93echo '=== Snapshot limit on refcount_bits=1 ===' 94echo 95 96_make_test_img -o "refcount_bits=1" 64M 97print_refcount_bits 98 99$QEMU_IO -c 'write 0 512' "$TEST_IMG" | _filter_qemu_io 100 101# Should fail for now; in the future, this might be supported by automatically 102# copying all clusters with overflowing refcount 103$QEMU_IMG snapshot -c foo "$TEST_IMG" 104 105# The new L1 table could/should be leaked 106_check_test_img 107 108echo 109echo '=== Snapshot limit on refcount_bits=2 ===' 110echo 111 112_make_test_img -o "refcount_bits=2" 64M 113print_refcount_bits 114 115$QEMU_IO -c 'write 0 512' "$TEST_IMG" | _filter_qemu_io 116 117# Should succeed 118$QEMU_IMG snapshot -c foo "$TEST_IMG" 119$QEMU_IMG snapshot -c bar "$TEST_IMG" 120# Should fail (4th reference) 121$QEMU_IMG snapshot -c baz "$TEST_IMG" 122 123# The new L1 table could/should be leaked 124_check_test_img 125 126echo 127echo '=== Compressed clusters with refcount_bits=1 ===' 128echo 129 130_make_test_img -o "refcount_bits=1" 64M 131print_refcount_bits 132 133# Both should fit into a single host cluster; instead of failing to increase the 134# refcount of that cluster, qemu should just allocate a new cluster and make 135# this operation succeed 136$QEMU_IO -c 'write -P 0 -c 0 64k' \ 137 -c 'write -P 1 -c 64k 64k' \ 138 "$TEST_IMG" | _filter_qemu_io 139 140_check_test_img 141 142echo 143echo '=== MSb set in 64 bit refcount ===' 144echo 145 146_make_test_img -o "refcount_bits=64" 64M 147print_refcount_bits 148 149$QEMU_IO -c 'write 0 512' "$TEST_IMG" | _filter_qemu_io 150 151# Set the MSb in the refblock entry of the data cluster 152poke_file "$TEST_IMG" $((0x20028)) "\x80\x00\x00\x00\x00\x00\x00\x00" 153 154# Clear OFLAG_COPIED in the L2 entry of the data cluster 155poke_file "$TEST_IMG" $((0x40000)) "\x00\x00\x00\x00\x00\x05\x00\x00" 156 157# Try to write to that cluster (should work, even though the MSb is set) 158$QEMU_IO -c 'write 0 512' "$TEST_IMG" | _filter_qemu_io 159 160echo 161echo '=== Snapshot on maximum 64 bit refcount value ===' 162echo 163 164_make_test_img -o "refcount_bits=64" 64M 165print_refcount_bits 166 167$QEMU_IO -c 'write 0 512' "$TEST_IMG" | _filter_qemu_io 168 169# Set the refblock entry to the maximum value possible 170poke_file "$TEST_IMG" $((0x20028)) "\xff\xff\xff\xff\xff\xff\xff\xff" 171 172# Clear OFLAG_COPIED in the L2 entry of the data cluster 173poke_file "$TEST_IMG" $((0x40000)) "\x00\x00\x00\x00\x00\x05\x00\x00" 174 175# Try a snapshot (should correctly identify the overflow; may work in the future 176# by falling back to COW) 177$QEMU_IMG snapshot -c foo "$TEST_IMG" 178 179# The new L1 table could/should be leaked; and obviously the data cluster is 180# leaked (refcount=UINT64_MAX reference=1) 181_check_test_img 182 183echo 184echo '=== Amend from refcount_bits=16 to refcount_bits=1 ===' 185echo 186 187_make_test_img 64M 188print_refcount_bits 189 190$QEMU_IO -c 'write 16M 32M' "$TEST_IMG" | _filter_qemu_io 191$QEMU_IMG amend -o refcount_bits=1 "$TEST_IMG" 192_check_test_img 193print_refcount_bits 194 195echo 196echo '=== Amend from refcount_bits=1 to refcount_bits=64 ===' 197echo 198 199$QEMU_IMG amend -o refcount_bits=64 "$TEST_IMG" 200_check_test_img 201print_refcount_bits 202 203echo 204echo '=== Amend to compat=0.10 ===' 205echo 206 207# Should not work because refcount_bits needs to be 16 for compat=0.10 208$QEMU_IMG amend -o compat=0.10 "$TEST_IMG" 209print_refcount_bits 210# Should work 211$QEMU_IMG amend -o compat=0.10,refcount_bits=16 "$TEST_IMG" 212_check_test_img 213print_refcount_bits 214 215# Get back to compat=1.1 and refcount_bits=16 216$QEMU_IMG amend -o compat=1.1 "$TEST_IMG" 217print_refcount_bits 218# Should not work 219$QEMU_IMG amend -o refcount_bits=32,compat=0.10 "$TEST_IMG" 220print_refcount_bits 221 222echo 223echo '=== Amend with snapshot ===' 224echo 225 226$QEMU_IMG snapshot -c foo "$TEST_IMG" 227# Just to have different refcounts across the image 228$QEMU_IO -c 'write 0 16M' "$TEST_IMG" | _filter_qemu_io 229 230# Should not work (may work in the future by first decreasing all refcounts so 231# they fit into the target range by copying them) 232$QEMU_IMG amend -o refcount_bits=1 "$TEST_IMG" 233_check_test_img 234print_refcount_bits 235 236# Should work 237$QEMU_IMG amend -o refcount_bits=2 "$TEST_IMG" 238_check_test_img 239print_refcount_bits 240 241echo 242echo '=== Testing too many references for check ===' 243echo 244 245_make_test_img -o "refcount_bits=1" 64M 246print_refcount_bits 247 248# This cluster should be created at 0x50000 249$QEMU_IO -c 'write 0 64k' "$TEST_IMG" | _filter_qemu_io 250# Now make the second L2 entry (the L2 table should be at 0x40000) point to that 251# cluster, so we have two references 252poke_file "$TEST_IMG" $((0x40008)) "\x80\x00\x00\x00\x00\x05\x00\x00" 253 254# This should say "please use amend" 255_check_test_img -r all 256 257# So we do that 258$QEMU_IMG amend -o refcount_bits=2 "$TEST_IMG" 259print_refcount_bits 260 261# And try again 262_check_test_img -r all 263 264echo 265echo '=== Multiple walks necessary during amend ===' 266echo 267 268_make_test_img -o "refcount_bits=1,cluster_size=512" 64k 269 270# Cluster 0 is the image header, clusters 1 to 4 are used by the L1 table, a 271# single L2 table, the reftable and a single refblock. This creates 58 data 272# clusters (actually, the L2 table is created here, too), so in total there are 273# then 63 used clusters in the image. With a refcount width of 64, one refblock 274# describes 64 clusters (512 bytes / 64 bits/entry = 64 entries), so this will 275# make the first refblock in the amended image have exactly one free entry. 276$QEMU_IO -c "write 0 $((58 * 512))" "$TEST_IMG" | _filter_qemu_io 277 278# Now change the refcount width; since the first new refblock will have exactly 279# one free entry, that entry will be used to store its own reference. No other 280# refblocks are needed, so then the new reftable will be allocated; since the 281# first new refblock is completely filled up, this will require a new refblock 282# which is why the refcount width changing function will need to run through 283# everything one more time until the allocations are stable. 284# Having more walks than usual should be visible as regressing progress (from 285# 66.67 % (2/3 walks) to 50.00 % (2/4 walks)). 286$QEMU_IMG amend -o refcount_bits=64 -p "$TEST_IMG" | tr '\r' '\n' \ 287 | grep -A 1 '66.67' 288print_refcount_bits 289 290_check_test_img 291 292 293# success, all done 294echo '*** done' 295rm -f $seq.full 296status=0 297