1#!/bin/bash 2# 3# Test command line configuration of block devices and driver-specific options 4# 5# Copyright (C) 2013 Red Hat, Inc. 6# 7# This program is free software; you can redistribute it and/or modify 8# it under the terms of the GNU General Public License as published by 9# the Free Software Foundation; either version 2 of the License, or 10# (at your option) any later version. 11# 12# This program is distributed in the hope that it will be useful, 13# but WITHOUT ANY WARRANTY; without even the implied warranty of 14# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15# GNU General Public License for more details. 16# 17# You should have received a copy of the GNU General Public License 18# along with this program. If not, see <http://www.gnu.org/licenses/>. 19# 20 21# creator 22owner=kwolf@redhat.com 23 24seq=`basename $0` 25echo "QA output created by $seq" 26 27here=`pwd` 28status=1 # failure is the default! 29 30_cleanup() 31{ 32 _cleanup_test_img 33} 34trap "_cleanup; exit \$status" 0 1 2 3 15 35 36# get standard environment, filters and checks 37. ./common.rc 38. ./common.filter 39 40_supported_fmt qcow2 41_supported_proto file 42_supported_os Linux 43# A compat=0.10 image is created in this test which does not support anything 44# other than refcount_bits=16 45_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)' 46 47function do_run_qemu() 48{ 49 echo Testing: "$@" 50 ( 51 if ! test -t 0; then 52 while read cmd; do 53 echo $cmd 54 done 55 fi 56 echo quit 57 ) | $QEMU -nographic -monitor stdio -serial none "$@" 58 echo 59} 60 61function run_qemu() 62{ 63 do_run_qemu "$@" 2>&1 | _filter_testdir | _filter_qemu | 64 _filter_generated_node_ids | _filter_hmp 65} 66 67size=128M 68device_id="drive0" 69 70_make_test_img $size 71cp "$TEST_IMG" "$TEST_IMG.orig" 72mv "$TEST_IMG" "$TEST_IMG.base" 73_make_test_img -b "$TEST_IMG.base" $size 74 75echo 76echo === Unknown option === 77echo 78 79run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=,if=none,id=$device_id 80run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=on,if=none,id=$device_id 81run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=1234,if=none,id=$device_id 82run_qemu -drive file="$TEST_IMG",format=qcow2,unknown_opt=foo,if=none,id=$device_id 83 84echo 85echo === Unknown protocol option === 86echo 87 88run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt= 89run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=on 90run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=1234 91run_qemu -drive file="$TEST_IMG",format=qcow2,file.unknown_opt=foo 92 93echo 94echo === Invalid format === 95echo 96 97run_qemu -drive file="$TEST_IMG",format=foo 98run_qemu -drive file="$TEST_IMG",driver=foo 99run_qemu -drive file="$TEST_IMG",driver=raw,format=qcow2 100run_qemu -drive file="$TEST_IMG",driver=qcow2,format=qcow2 101 102echo 103echo === Node names === 104echo 105 106# Maximum length: 31 characters 107run_qemu -drive file="$TEST_IMG",node-name=x123456789012345678901234567890 108run_qemu -drive file="$TEST_IMG",node-name=x1234567890123456789012345678901 109 110# First character must be alphabetic 111# Following characters alphanumeric or -._ 112run_qemu -drive file="$TEST_IMG",node-name=All-Types.of_all0wed_chars 113run_qemu -drive file="$TEST_IMG",node-name=123foo 114run_qemu -drive file="$TEST_IMG",node-name=_foo 115run_qemu -drive file="$TEST_IMG",node-name=foo#12 116 117echo 118echo === Device without drive === 119echo 120 121case "$QEMU_DEFAULT_MACHINE" in 122 s390-ccw-virtio) 123 virtio_scsi=virtio-scsi-ccw 124 ;; 125 *) 126 virtio_scsi=virtio-scsi-pci 127 ;; 128esac 129 130run_qemu -device $virtio_scsi -device scsi-hd | 131 sed -e "s/$virtio_scsi/VIRTIO_SCSI/" 132 133echo 134echo === Overriding backing file === 135echo 136 137echo "info block" | run_qemu -drive file="$TEST_IMG",driver=qcow2,backing.file.filename="$TEST_IMG.orig",if=none,id=$device_id -nodefaults\ 138 | _filter_generated_node_ids 139 140# Drivers that don't support backing files 141run_qemu -drive file="$TEST_IMG",driver=raw,backing.file.filename="$TEST_IMG.orig" 142run_qemu -drive file="$TEST_IMG",file.backing.driver=file,file.backing.filename="$TEST_IMG.orig" 143run_qemu -drive file="$TEST_IMG",file.backing.driver=qcow2,file.backing.file.filename="$TEST_IMG.orig" 144 145echo 146echo === Enable and disable lazy refcounting on the command line, plus some invalid values === 147echo 148 149_make_test_img -o compat=1.1 "$size" 150 151run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=on 152run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=off 153run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts= 154run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=42 155run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=foo 156 157 158echo 159echo === With version 2 images enabling lazy refcounts must fail === 160echo 161 162_make_test_img -ocompat=0.10 $size 163 164run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=on 165run_qemu -drive file="$TEST_IMG",format=qcow2,lazy-refcounts=off 166 167echo 168echo === No medium === 169echo 170 171case "$QEMU_DEFAULT_MACHINE" in 172 pc) 173 run_qemu -drive if=floppy 174 run_qemu -drive if=ide,media=cdrom 175 run_qemu -drive if=ide 176 ;; 177 *) 178 ;; 179esac 180 181run_qemu -drive if=virtio 182 183case "$QEMU_DEFAULT_MACHINE" in 184 pc) 185 run_qemu -drive if=none,id=disk -device ide-cd,drive=disk 186 run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk 187 run_qemu -drive if=none,id=disk -device ide-drive,drive=disk 188 run_qemu -drive if=none,id=disk -device ide-hd,drive=disk 189 run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk 190 run_qemu -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk 191 ;; 192 *) 193 ;; 194esac 195 196echo 197echo === Read-only === 198echo 199 200case "$QEMU_DEFAULT_MACHINE" in 201 pc) 202 run_qemu -drive file="$TEST_IMG",if=floppy,readonly=on 203 run_qemu -drive file="$TEST_IMG",if=ide,media=cdrom,readonly=on 204 run_qemu -drive file="$TEST_IMG",if=ide,readonly=on 205 ;; 206 *) 207 ;; 208esac 209 210run_qemu -drive file="$TEST_IMG",if=virtio,readonly=on 211 212case "$QEMU_DEFAULT_MACHINE" in 213 pc) 214 run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-cd,drive=disk 215 run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk 216 run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-drive,drive=disk 217 run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device ide-hd,drive=disk 218 run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk 219 run_qemu -drive file="$TEST_IMG",if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk 220 ;; 221 *) 222 ;; 223esac 224 225echo 226echo === Cache modes === 227echo 228 229# Cannot use the test image because cache=none might not work on the host FS 230# Use cdrom so that we won't get errors about missing media 231 232run_qemu -drive driver=null-co,cache=none 233run_qemu -drive driver=null-co,cache=directsync 234run_qemu -drive driver=null-co,cache=writeback 235run_qemu -drive driver=null-co,cache=writethrough 236run_qemu -drive driver=null-co,cache=unsafe 237run_qemu -drive driver=null-co,cache=invalid_value 238 239# Can't test direct=on here because O_DIRECT might not be supported on this FS 240# Test 142 checks the direct=on cases 241 242for cache in writeback writethrough unsafe invalid_value; do 243 printf "info block %s\n" '' file backing backing-file | \ 244 run_qemu -drive file="$TEST_IMG",cache=$cache,backing.file.filename="$TEST_IMG.base",backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=$device_id -nodefaults 245done 246 247echo 248echo === Specifying the protocol layer === 249echo 250 251run_qemu -drive file="$TEST_IMG",file.driver=file 252 253echo 254echo === Leaving out required options === 255echo 256 257run_qemu -drive driver=file 258run_qemu -drive driver=file,filename= 259run_qemu -drive driver=nbd 260run_qemu -drive driver=raw 261run_qemu -drive file.driver=file 262run_qemu -drive file.driver=nbd 263run_qemu -drive file.driver=raw 264run_qemu -drive foo=bar 265 266echo 267echo === Specifying both an option and its legacy alias === 268echo 269 270run_qemu -drive file="$TEST_IMG",iops=1234,throttling.iops-total=5678 271run_qemu -drive file="$TEST_IMG",iops_rd=1234,throttling.iops-read=5678 272run_qemu -drive file="$TEST_IMG",iops_wr=1234,throttling.iops-write=5678 273 274run_qemu -drive file="$TEST_IMG",bps=1234,throttling.bps-total=5678 275run_qemu -drive file="$TEST_IMG",bps_rd=1234,throttling.bps-read=5678 276run_qemu -drive file="$TEST_IMG",bps_wr=1234,throttling.bps-write=5678 277 278run_qemu -drive file="$TEST_IMG",iops_max=1234,throttling.iops-total-max=5678 279run_qemu -drive file="$TEST_IMG",iops_rd_max=1234,throttling.iops-read-max=5678 280run_qemu -drive file="$TEST_IMG",iops_wr_max=1234,throttling.iops-write-max=5678 281 282run_qemu -drive file="$TEST_IMG",bps_max=1234,throttling.bps-total-max=5678 283run_qemu -drive file="$TEST_IMG",bps_rd_max=1234,throttling.bps-read-max=5678 284run_qemu -drive file="$TEST_IMG",bps_wr_max=1234,throttling.bps-write-max=5678 285 286run_qemu -drive file="$TEST_IMG",iops_size=1234,throttling.iops-size=5678 287run_qemu -drive file="$TEST_IMG",readonly=on,read-only=off 288 289echo 290echo === Catching negative/large throttling values === 291echo 292 293run_qemu -drive file="$TEST_IMG",iops=-1 294run_qemu -drive file="$TEST_IMG",bps=-2 295run_qemu -drive file="$TEST_IMG",bps_rd=-3 296run_qemu -drive file="$TEST_IMG",bps_rd_max=-3 297run_qemu -drive file="$TEST_IMG",throttling.iops-total=-4 298run_qemu -drive file="$TEST_IMG",throttling.bps-total=-5 299# These are accepted 300run_qemu -drive file="$TEST_IMG",bps=0 301run_qemu -drive file="$TEST_IMG",bps=1 302run_qemu -drive file="$TEST_IMG",bps=1000000000000000 303# While these are not 304run_qemu -drive file="$TEST_IMG",bps=1000000000000001 305run_qemu -drive file="$TEST_IMG",bps=9999999999999999 306 307echo 308echo === Parsing protocol from file name === 309echo 310 311# Protocol strings are supposed to be parsed from traditional option strings, 312# but not when using driver-specific options. We can distinguish them by the 313# error message for non-existing files. 314 315run_qemu -hda foo:bar 316run_qemu -drive file=foo:bar 317run_qemu -drive file.filename=foo:bar 318 319run_qemu -hda "file:$TEST_IMG" 320run_qemu -drive file="file:$TEST_IMG" 321run_qemu -drive file.filename="file:$TEST_IMG" 322 323echo 324echo === Snapshot mode === 325echo 326 327$QEMU_IO -c "write -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io 328 329 330echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io 331echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io 332echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,snapshot=on,if=none,id=$device_id\ 333 | _filter_qemu_io 334echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file.filename="$TEST_IMG",driver=qcow2,if=none,id=$device_id -snapshot\ 335 | _filter_qemu_io 336echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io 337echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="file:$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io 338 339# Opening a read-only file r/w with snapshot=on 340chmod u-w "$TEST_IMG" 341echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",if=none,id=$device_id -snapshot | _filter_qemu_io 342echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | _filter_qemu_io 343chmod u+w "$TEST_IMG" 344 345$QEMU_IO -c "read -P 0x11 0 4k" "$TEST_IMG" | _filter_qemu_io 346 347echo "qemu-io $device_id \"write -P 0x22 0 4k\"" | run_qemu -drive file="$TEST_IMG",snapshot=off,if=none,id=$device_id | _filter_qemu_io 348 349$QEMU_IO -c "read -P 0x22 0 4k" "$TEST_IMG" | _filter_qemu_io 350 351printf %b "qemu-io $device_id \"write -P 0x33 0 4k\"\ncommit $device_id\n" | 352 run_qemu -drive file="$TEST_IMG",snapshot=on,if=none,id=$device_id | 353 _filter_qemu_io 354 355$QEMU_IO -c "read -P 0x33 0 4k" "$TEST_IMG" | _filter_qemu_io 356 357# Using snapshot=on with a non-existent TMPDIR 358TMPDIR=/nonexistent run_qemu -drive driver=null-co,snapshot=on 359 360# success, all done 361echo "*** done" 362rm -f $seq.full 363status=0 364