1 /* 2 * Copyright (c) 2011, Max Filippov, Open Source and Linux Lab. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * * Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * * Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * * Neither the name of the Open Source and Linux Lab nor the 13 * names of its contributors may be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 20 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 22 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 23 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 25 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 #include "qemu/osdep.h" 29 #include "qemu/log.h" 30 #include "cpu.h" 31 #include "exec/exec-all.h" 32 #include "gdbstub/helpers.h" 33 #include "exec/helper-proto.h" 34 #include "qemu/error-report.h" 35 #include "qemu/qemu-print.h" 36 #include "qemu/host-utils.h" 37 38 static struct XtensaConfigList *xtensa_cores; 39 40 static void add_translator_to_hash(GHashTable *translator, 41 const char *name, 42 const XtensaOpcodeOps *opcode) 43 { 44 if (!g_hash_table_insert(translator, (void *)name, (void *)opcode)) { 45 error_report("Multiple definitions of '%s' opcode in a single table", 46 name); 47 } 48 } 49 50 static GHashTable *hash_opcode_translators(const XtensaOpcodeTranslators *t) 51 { 52 unsigned i, j; 53 GHashTable *translator = g_hash_table_new(g_str_hash, g_str_equal); 54 55 for (i = 0; i < t->num_opcodes; ++i) { 56 if (t->opcode[i].op_flags & XTENSA_OP_NAME_ARRAY) { 57 const char * const *name = t->opcode[i].name; 58 59 for (j = 0; name[j]; ++j) { 60 add_translator_to_hash(translator, 61 (void *)name[j], 62 (void *)(t->opcode + i)); 63 } 64 } else { 65 add_translator_to_hash(translator, 66 (void *)t->opcode[i].name, 67 (void *)(t->opcode + i)); 68 } 69 } 70 return translator; 71 } 72 73 static XtensaOpcodeOps * 74 xtensa_find_opcode_ops(const XtensaOpcodeTranslators *t, 75 const char *name) 76 { 77 static GHashTable *translators; 78 GHashTable *translator; 79 80 if (translators == NULL) { 81 translators = g_hash_table_new(g_direct_hash, g_direct_equal); 82 } 83 translator = g_hash_table_lookup(translators, t); 84 if (translator == NULL) { 85 translator = hash_opcode_translators(t); 86 g_hash_table_insert(translators, (void *)t, translator); 87 } 88 return g_hash_table_lookup(translator, name); 89 } 90 91 static void init_libisa(XtensaConfig *config) 92 { 93 unsigned i, j; 94 unsigned opcodes; 95 unsigned formats; 96 unsigned regfiles; 97 98 config->isa = xtensa_isa_init(config->isa_internal, NULL, NULL); 99 assert(xtensa_isa_maxlength(config->isa) <= MAX_INSN_LENGTH); 100 assert(xtensa_insnbuf_size(config->isa) <= MAX_INSNBUF_LENGTH); 101 opcodes = xtensa_isa_num_opcodes(config->isa); 102 formats = xtensa_isa_num_formats(config->isa); 103 regfiles = xtensa_isa_num_regfiles(config->isa); 104 config->opcode_ops = g_new(XtensaOpcodeOps *, opcodes); 105 106 for (i = 0; i < formats; ++i) { 107 assert(xtensa_format_num_slots(config->isa, i) <= MAX_INSN_SLOTS); 108 } 109 110 for (i = 0; i < opcodes; ++i) { 111 const char *opc_name = xtensa_opcode_name(config->isa, i); 112 XtensaOpcodeOps *ops = NULL; 113 114 assert(xtensa_opcode_num_operands(config->isa, i) <= MAX_OPCODE_ARGS); 115 if (!config->opcode_translators) { 116 ops = xtensa_find_opcode_ops(&xtensa_core_opcodes, opc_name); 117 } else { 118 for (j = 0; !ops && config->opcode_translators[j]; ++j) { 119 ops = xtensa_find_opcode_ops(config->opcode_translators[j], 120 opc_name); 121 } 122 } 123 #ifdef DEBUG 124 if (ops == NULL) { 125 fprintf(stderr, 126 "opcode translator not found for %s's opcode '%s'\n", 127 config->name, opc_name); 128 } 129 #endif 130 config->opcode_ops[i] = ops; 131 } 132 config->a_regfile = xtensa_regfile_lookup(config->isa, "AR"); 133 134 config->regfile = g_new(void **, regfiles); 135 for (i = 0; i < regfiles; ++i) { 136 const char *name = xtensa_regfile_name(config->isa, i); 137 int entries = xtensa_regfile_num_entries(config->isa, i); 138 int bits = xtensa_regfile_num_bits(config->isa, i); 139 140 config->regfile[i] = xtensa_get_regfile_by_name(name, entries, bits); 141 #ifdef DEBUG 142 if (config->regfile[i] == NULL) { 143 fprintf(stderr, "regfile '%s' not found for %s\n", 144 name, config->name); 145 } 146 #endif 147 } 148 xtensa_collect_sr_names(config); 149 } 150 151 static void xtensa_finalize_config(XtensaConfig *config) 152 { 153 if (config->isa_internal) { 154 init_libisa(config); 155 } 156 157 if (config->gdb_regmap.num_regs == 0 || 158 config->gdb_regmap.num_core_regs == 0) { 159 unsigned n_regs = 0; 160 unsigned n_core_regs = 0; 161 162 xtensa_count_regs(config, &n_regs, &n_core_regs); 163 if (config->gdb_regmap.num_regs == 0) { 164 config->gdb_regmap.num_regs = n_regs; 165 } 166 if (config->gdb_regmap.num_core_regs == 0) { 167 config->gdb_regmap.num_core_regs = n_core_regs; 168 } 169 } 170 } 171 172 static void xtensa_core_class_init(ObjectClass *oc, void *data) 173 { 174 CPUClass *cc = CPU_CLASS(oc); 175 XtensaCPUClass *xcc = XTENSA_CPU_CLASS(oc); 176 XtensaConfig *config = data; 177 178 xtensa_finalize_config(config); 179 xcc->config = config; 180 181 /* 182 * Use num_core_regs to see only non-privileged registers in an unmodified 183 * gdb. Use num_regs to see all registers. gdb modification is required 184 * for that: reset bit 0 in the 'flags' field of the registers definitions 185 * in the gdb/xtensa-config.c inside gdb source tree or inside gdb overlay. 186 */ 187 cc->gdb_num_core_regs = config->gdb_regmap.num_regs; 188 } 189 190 void xtensa_register_core(XtensaConfigList *node) 191 { 192 TypeInfo type = { 193 .parent = TYPE_XTENSA_CPU, 194 .class_init = xtensa_core_class_init, 195 .class_data = (void *)node->config, 196 }; 197 198 node->next = xtensa_cores; 199 xtensa_cores = node; 200 type.name = g_strdup_printf(XTENSA_CPU_TYPE_NAME("%s"), node->config->name); 201 type_register(&type); 202 g_free((gpointer)type.name); 203 } 204 205 static uint32_t check_hw_breakpoints(CPUXtensaState *env) 206 { 207 unsigned i; 208 209 for (i = 0; i < env->config->ndbreak; ++i) { 210 if (env->cpu_watchpoint[i] && 211 env->cpu_watchpoint[i]->flags & BP_WATCHPOINT_HIT) { 212 return DEBUGCAUSE_DB | (i << DEBUGCAUSE_DBNUM_SHIFT); 213 } 214 } 215 return 0; 216 } 217 218 void xtensa_breakpoint_handler(CPUState *cs) 219 { 220 XtensaCPU *cpu = XTENSA_CPU(cs); 221 CPUXtensaState *env = &cpu->env; 222 223 if (cs->watchpoint_hit) { 224 if (cs->watchpoint_hit->flags & BP_CPU) { 225 uint32_t cause; 226 227 cs->watchpoint_hit = NULL; 228 cause = check_hw_breakpoints(env); 229 if (cause) { 230 debug_exception_env(env, cause); 231 } 232 cpu_loop_exit_noexc(cs); 233 } 234 } 235 } 236 237 #ifndef CONFIG_USER_ONLY 238 void xtensa_cpu_do_unaligned_access(CPUState *cs, 239 vaddr addr, MMUAccessType access_type, 240 int mmu_idx, uintptr_t retaddr) 241 { 242 XtensaCPU *cpu = XTENSA_CPU(cs); 243 CPUXtensaState *env = &cpu->env; 244 245 assert(xtensa_option_enabled(env->config, 246 XTENSA_OPTION_UNALIGNED_EXCEPTION)); 247 cpu_restore_state(CPU(cpu), retaddr); 248 HELPER(exception_cause_vaddr)(env, 249 env->pc, LOAD_STORE_ALIGNMENT_CAUSE, 250 addr); 251 } 252 253 bool xtensa_cpu_tlb_fill(CPUState *cs, vaddr address, int size, 254 MMUAccessType access_type, int mmu_idx, 255 bool probe, uintptr_t retaddr) 256 { 257 XtensaCPU *cpu = XTENSA_CPU(cs); 258 CPUXtensaState *env = &cpu->env; 259 uint32_t paddr; 260 uint32_t page_size; 261 unsigned access; 262 int ret = xtensa_get_physical_addr(env, true, address, access_type, 263 mmu_idx, &paddr, &page_size, &access); 264 265 qemu_log_mask(CPU_LOG_MMU, "%s(%08" VADDR_PRIx 266 ", %d, %d) -> %08x, ret = %d\n", 267 __func__, address, access_type, mmu_idx, paddr, ret); 268 269 if (ret == 0) { 270 tlb_set_page(cs, 271 address & TARGET_PAGE_MASK, 272 paddr & TARGET_PAGE_MASK, 273 access, mmu_idx, page_size); 274 return true; 275 } else if (probe) { 276 return false; 277 } else { 278 cpu_restore_state(cs, retaddr); 279 HELPER(exception_cause_vaddr)(env, env->pc, ret, address); 280 } 281 } 282 283 void xtensa_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, vaddr addr, 284 unsigned size, MMUAccessType access_type, 285 int mmu_idx, MemTxAttrs attrs, 286 MemTxResult response, uintptr_t retaddr) 287 { 288 XtensaCPU *cpu = XTENSA_CPU(cs); 289 CPUXtensaState *env = &cpu->env; 290 291 cpu_restore_state(cs, retaddr); 292 HELPER(exception_cause_vaddr)(env, env->pc, 293 access_type == MMU_INST_FETCH ? 294 INSTR_PIF_ADDR_ERROR_CAUSE : 295 LOAD_STORE_PIF_ADDR_ERROR_CAUSE, 296 addr); 297 } 298 299 void xtensa_runstall(CPUXtensaState *env, bool runstall) 300 { 301 CPUState *cpu = env_cpu(env); 302 303 env->runstall = runstall; 304 cpu->halted = runstall; 305 if (runstall) { 306 cpu_interrupt(cpu, CPU_INTERRUPT_HALT); 307 } else { 308 qemu_cpu_kick(cpu); 309 } 310 } 311 #endif /* !CONFIG_USER_ONLY */ 312