xref: /openbmc/qemu/target/mips/cpu-defs.c.inc (revision 51e47cf8)
1/*
2 *  MIPS emulation for qemu: CPU initialisation routines.
3 *
4 *  Copyright (c) 2004-2005 Jocelyn Mayer
5 *  Copyright (c) 2007 Herve Poussineau
6 *
7 * This library is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU Lesser General Public
9 * License as published by the Free Software Foundation; either
10 * version 2.1 of the License, or (at your option) any later version.
11 *
12 * This library is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15 * Lesser General Public License for more details.
16 *
17 * You should have received a copy of the GNU Lesser General Public
18 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
19 */
20
21/* CPU / CPU family specific config register values. */
22
23/* Have config1, uncached coherency */
24#define MIPS_CONFIG0                                              \
25  ((1U << CP0C0_M) | (0x2 << CP0C0_K0))
26
27/* Have config2, no coprocessor2 attached, no MDMX support attached,
28   no performance counters, watch registers present,
29   no code compression, EJTAG present, no FPU */
30#define MIPS_CONFIG1                                              \
31((1U << CP0C1_M) |                                                \
32 (0 << CP0C1_C2) | (0 << CP0C1_MD) | (0 << CP0C1_PC) |            \
33 (1 << CP0C1_WR) | (0 << CP0C1_CA) | (1 << CP0C1_EP) |            \
34 (0 << CP0C1_FP))
35
36/* Have config3, no tertiary/secondary caches implemented */
37#define MIPS_CONFIG2                                              \
38((1U << CP0C2_M))
39
40/* No config4, no DSP ASE, no large physaddr (PABITS),
41   no external interrupt controller, no vectored interrupts,
42   no 1kb pages, no SmartMIPS ASE, no trace logic */
43#define MIPS_CONFIG3                                              \
44((0 << CP0C3_M) | (0 << CP0C3_DSPP) | (0 << CP0C3_LPA) |          \
45 (0 << CP0C3_VEIC) | (0 << CP0C3_VInt) | (0 << CP0C3_SP) |        \
46 (0 << CP0C3_SM) | (0 << CP0C3_TL))
47
48#define MIPS_CONFIG4                                              \
49((0 << CP0C4_M))
50
51#define MIPS_CONFIG5                                              \
52((0 << CP0C5_M))
53
54/*****************************************************************************/
55/* MIPS CPU definitions */
56const mips_def_t mips_defs[] =
57{
58    {
59        .name = "4Kc",
60        .CP0_PRid = 0x00018000,
61        .CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_R4000 << CP0C0_MT),
62        .CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
63                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
64                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
65                       (0 << CP0C1_CA),
66        .CP0_Config2 = MIPS_CONFIG2,
67        .CP0_Config3 = MIPS_CONFIG3,
68        .CP0_LLAddr_rw_bitmask = 0,
69        .CP0_LLAddr_shift = 4,
70        .SYNCI_Step = 32,
71        .CCRes = 2,
72        .CP0_Status_rw_bitmask = 0x1278FF17,
73        .SEGBITS = 32,
74        .PABITS = 32,
75        .insn_flags = CPU_MIPS32R1,
76        .mmu_type = MMU_TYPE_R4000,
77    },
78    {
79        .name = "4Km",
80        .CP0_PRid = 0x00018300,
81        /* Config1 implemented, fixed mapping MMU,
82           no virtual icache, uncached coherency. */
83        .CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_FMT << CP0C0_MT),
84        .CP0_Config1 = MIPS_CONFIG1 |
85                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
86                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
87                       (1 << CP0C1_CA),
88        .CP0_Config2 = MIPS_CONFIG2,
89        .CP0_Config3 = MIPS_CONFIG3,
90        .CP0_LLAddr_rw_bitmask = 0,
91        .CP0_LLAddr_shift = 4,
92        .SYNCI_Step = 32,
93        .CCRes = 2,
94        .CP0_Status_rw_bitmask = 0x1258FF17,
95        .SEGBITS = 32,
96        .PABITS = 32,
97        .insn_flags = CPU_MIPS32R1 | ASE_MIPS16,
98        .mmu_type = MMU_TYPE_FMT,
99    },
100    {
101        .name = "4KEcR1",
102        .CP0_PRid = 0x00018400,
103        .CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_R4000 << CP0C0_MT),
104        .CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
105                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
106                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
107                       (0 << CP0C1_CA),
108        .CP0_Config2 = MIPS_CONFIG2,
109        .CP0_Config3 = MIPS_CONFIG3,
110        .CP0_LLAddr_rw_bitmask = 0,
111        .CP0_LLAddr_shift = 4,
112        .SYNCI_Step = 32,
113        .CCRes = 2,
114        .CP0_Status_rw_bitmask = 0x1278FF17,
115        .SEGBITS = 32,
116        .PABITS = 32,
117        .insn_flags = CPU_MIPS32R1,
118        .mmu_type = MMU_TYPE_R4000,
119    },
120    {
121        .name = "4KEmR1",
122        .CP0_PRid = 0x00018500,
123        .CP0_Config0 = MIPS_CONFIG0 | (MMU_TYPE_FMT << CP0C0_MT),
124        .CP0_Config1 = MIPS_CONFIG1 |
125                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
126                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
127                       (1 << CP0C1_CA),
128        .CP0_Config2 = MIPS_CONFIG2,
129        .CP0_Config3 = MIPS_CONFIG3,
130        .CP0_LLAddr_rw_bitmask = 0,
131        .CP0_LLAddr_shift = 4,
132        .SYNCI_Step = 32,
133        .CCRes = 2,
134        .CP0_Status_rw_bitmask = 0x1258FF17,
135        .SEGBITS = 32,
136        .PABITS = 32,
137        .insn_flags = CPU_MIPS32R1 | ASE_MIPS16,
138        .mmu_type = MMU_TYPE_FMT,
139    },
140    {
141        .name = "4KEc",
142        .CP0_PRid = 0x00019000,
143        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
144                    (MMU_TYPE_R4000 << CP0C0_MT),
145        .CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
146                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
147                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
148                       (0 << CP0C1_CA),
149        .CP0_Config2 = MIPS_CONFIG2,
150        .CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt),
151        .CP0_LLAddr_rw_bitmask = 0,
152        .CP0_LLAddr_shift = 4,
153        .SYNCI_Step = 32,
154        .CCRes = 2,
155        .CP0_Status_rw_bitmask = 0x1278FF17,
156        .SEGBITS = 32,
157        .PABITS = 32,
158        .insn_flags = CPU_MIPS32R2,
159        .mmu_type = MMU_TYPE_R4000,
160    },
161    {
162        .name = "4KEm",
163        .CP0_PRid = 0x00019100,
164        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
165                       (MMU_TYPE_FMT << CP0C0_MT),
166        .CP0_Config1 = MIPS_CONFIG1 |
167                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
168                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
169                       (1 << CP0C1_CA),
170        .CP0_Config2 = MIPS_CONFIG2,
171        .CP0_Config3 = MIPS_CONFIG3,
172        .CP0_LLAddr_rw_bitmask = 0,
173        .CP0_LLAddr_shift = 4,
174        .SYNCI_Step = 32,
175        .CCRes = 2,
176        .CP0_Status_rw_bitmask = 0x1258FF17,
177        .SEGBITS = 32,
178        .PABITS = 32,
179        .insn_flags = CPU_MIPS32R2 | ASE_MIPS16,
180        .mmu_type = MMU_TYPE_FMT,
181    },
182    {
183        .name = "24Kc",
184        .CP0_PRid = 0x00019300,
185        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
186                       (MMU_TYPE_R4000 << CP0C0_MT),
187        .CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
188                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
189                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
190                       (1 << CP0C1_CA),
191        .CP0_Config2 = MIPS_CONFIG2,
192        .CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt),
193        .CP0_LLAddr_rw_bitmask = 0,
194        .CP0_LLAddr_shift = 4,
195        .SYNCI_Step = 32,
196        .CCRes = 2,
197        /* No DSP implemented. */
198        .CP0_Status_rw_bitmask = 0x1278FF1F,
199        .SEGBITS = 32,
200        .PABITS = 32,
201        .insn_flags = CPU_MIPS32R2 | ASE_MIPS16,
202        .mmu_type = MMU_TYPE_R4000,
203    },
204    {
205        .name = "24KEc",
206        .CP0_PRid = 0x00019600,
207        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
208                       (MMU_TYPE_R4000 << CP0C0_MT),
209        .CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
210                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
211                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
212                       (1 << CP0C1_CA),
213        .CP0_Config2 = MIPS_CONFIG2,
214        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_DSPP) | (0 << CP0C3_VInt),
215        .CP0_LLAddr_rw_bitmask = 0,
216        .CP0_LLAddr_shift = 4,
217        .SYNCI_Step = 32,
218        .CCRes = 2,
219        /* we have a DSP, but no FPU */
220        .CP0_Status_rw_bitmask = 0x1378FF1F,
221        .SEGBITS = 32,
222        .PABITS = 32,
223        .insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP,
224        .mmu_type = MMU_TYPE_R4000,
225    },
226    {
227        .name = "24Kf",
228        .CP0_PRid = 0x00019300,
229        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
230                    (MMU_TYPE_R4000 << CP0C0_MT),
231        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
232                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
233                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
234                       (1 << CP0C1_CA),
235        .CP0_Config2 = MIPS_CONFIG2,
236        .CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt),
237        .CP0_LLAddr_rw_bitmask = 0,
238        .CP0_LLAddr_shift = 4,
239        .SYNCI_Step = 32,
240        .CCRes = 2,
241        /* No DSP implemented. */
242        .CP0_Status_rw_bitmask = 0x3678FF1F,
243        .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
244                    (1 << FCR0_D) | (1 << FCR0_S) | (0x93 << FCR0_PRID),
245        .CP1_fcr31 = 0,
246        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
247        .SEGBITS = 32,
248        .PABITS = 32,
249        .insn_flags = CPU_MIPS32R2 | ASE_MIPS16,
250        .mmu_type = MMU_TYPE_R4000,
251    },
252    {
253        .name = "34Kf",
254        .CP0_PRid = 0x00019500,
255        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
256                       (MMU_TYPE_R4000 << CP0C0_MT),
257        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (63 << CP0C1_MMU) |
258                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
259                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
260                       (1 << CP0C1_CA),
261        .CP0_Config2 = MIPS_CONFIG2,
262        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_VInt) | (1 << CP0C3_MT) |
263                       (1 << CP0C3_DSPP),
264        .CP0_LLAddr_rw_bitmask = 0,
265        .CP0_LLAddr_shift = 0,
266        .SYNCI_Step = 32,
267        .CCRes = 2,
268        .CP0_Status_rw_bitmask = 0x3778FF1F,
269        .CP0_TCStatus_rw_bitmask = (0 << CP0TCSt_TCU3) | (0 << CP0TCSt_TCU2) |
270                    (1 << CP0TCSt_TCU1) | (1 << CP0TCSt_TCU0) |
271                    (0 << CP0TCSt_TMX) | (1 << CP0TCSt_DT) |
272                    (1 << CP0TCSt_DA) | (1 << CP0TCSt_A) |
273                    (0x3 << CP0TCSt_TKSU) | (1 << CP0TCSt_IXMT) |
274                    (0xff << CP0TCSt_TASID),
275        .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
276                    (1 << FCR0_D) | (1 << FCR0_S) | (0x95 << FCR0_PRID),
277        .CP1_fcr31 = 0,
278        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
279        .CP0_SRSCtl = (0xf << CP0SRSCtl_HSS),
280        .CP0_SRSConf0_rw_bitmask = 0x3fffffff,
281        .CP0_SRSConf0 = (1U << CP0SRSC0_M) | (0x3fe << CP0SRSC0_SRS3) |
282                    (0x3fe << CP0SRSC0_SRS2) | (0x3fe << CP0SRSC0_SRS1),
283        .CP0_SRSConf1_rw_bitmask = 0x3fffffff,
284        .CP0_SRSConf1 = (1U << CP0SRSC1_M) | (0x3fe << CP0SRSC1_SRS6) |
285                    (0x3fe << CP0SRSC1_SRS5) | (0x3fe << CP0SRSC1_SRS4),
286        .CP0_SRSConf2_rw_bitmask = 0x3fffffff,
287        .CP0_SRSConf2 = (1U << CP0SRSC2_M) | (0x3fe << CP0SRSC2_SRS9) |
288                    (0x3fe << CP0SRSC2_SRS8) | (0x3fe << CP0SRSC2_SRS7),
289        .CP0_SRSConf3_rw_bitmask = 0x3fffffff,
290        .CP0_SRSConf3 = (1U << CP0SRSC3_M) | (0x3fe << CP0SRSC3_SRS12) |
291                    (0x3fe << CP0SRSC3_SRS11) | (0x3fe << CP0SRSC3_SRS10),
292        .CP0_SRSConf4_rw_bitmask = 0x3fffffff,
293        .CP0_SRSConf4 = (0x3fe << CP0SRSC4_SRS15) |
294                    (0x3fe << CP0SRSC4_SRS14) | (0x3fe << CP0SRSC4_SRS13),
295        .SEGBITS = 32,
296        .PABITS = 32,
297        .insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_MT,
298        .mmu_type = MMU_TYPE_R4000,
299    },
300    {
301        .name = "74Kf",
302        .CP0_PRid = 0x00019700,
303        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
304                    (MMU_TYPE_R4000 << CP0C0_MT),
305        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
306                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
307                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
308                       (1 << CP0C1_CA),
309        .CP0_Config2 = MIPS_CONFIG2,
310        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_DSP2P) | (1 << CP0C3_DSPP) |
311                       (1 << CP0C3_VInt),
312        .CP0_LLAddr_rw_bitmask = 0,
313        .CP0_LLAddr_shift = 4,
314        .SYNCI_Step = 32,
315        .CCRes = 2,
316        .CP0_Status_rw_bitmask = 0x3778FF1F,
317        .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
318                    (1 << FCR0_D) | (1 << FCR0_S) | (0x93 << FCR0_PRID),
319        .CP1_fcr31 = 0,
320        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
321        .SEGBITS = 32,
322        .PABITS = 32,
323        .insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_DSP_R2,
324        .mmu_type = MMU_TYPE_R4000,
325    },
326    {
327        .name = "M14K",
328        .CP0_PRid = 0x00019b00,
329        /* Config1 implemented, fixed mapping MMU,
330           no virtual icache, uncached coherency. */
331        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_KU) | (0x2 << CP0C0_K23) |
332                       (0x1 << CP0C0_AR) | (MMU_TYPE_FMT << CP0C0_MT),
333        .CP0_Config1 = MIPS_CONFIG1,
334        .CP0_Config2 = MIPS_CONFIG2,
335        .CP0_Config3 = MIPS_CONFIG3 | (0x2 << CP0C3_ISA) | (1 << CP0C3_VInt) |
336                       (1 << CP0C3_M),
337        .CP0_Config4 = MIPS_CONFIG4 | (1 << CP0C4_M),
338        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_NFExists),
339        .CP0_Config7 = 1 << CP0C7_WII,
340        .CP0_LLAddr_rw_bitmask = 0,
341        .CP0_LLAddr_shift = 4,
342        .SYNCI_Step = 32,
343        .CCRes = 2,
344        .CP0_Status_rw_bitmask = 0x1258FF17,
345        .SEGBITS = 32,
346        .PABITS = 32,
347        .insn_flags = CPU_MIPS32R2 | ASE_MICROMIPS,
348        .mmu_type = MMU_TYPE_FMT,
349    },
350    {
351        .name = "M14Kc",
352        /* This is the TLB-based MMU core.  */
353        .CP0_PRid = 0x00019c00,
354        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
355                       (MMU_TYPE_R4000 << CP0C0_MT),
356        .CP0_Config1 = MIPS_CONFIG1 | (15 << CP0C1_MMU) |
357                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
358                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA),
359        .CP0_Config2 = MIPS_CONFIG2,
360        .CP0_Config3 = MIPS_CONFIG3 | (0x2 << CP0C3_ISA) | (0 << CP0C3_VInt) |
361                       (1 << CP0C3_M),
362        .CP0_Config4 = MIPS_CONFIG4 | (1 << CP0C4_M),
363        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_NFExists),
364        .CP0_Config7 = 1 << CP0C7_WII,
365        .CP0_LLAddr_rw_bitmask = 0,
366        .CP0_LLAddr_shift = 4,
367        .SYNCI_Step = 32,
368        .CCRes = 2,
369        .CP0_Status_rw_bitmask = 0x1278FF17,
370        .SEGBITS = 32,
371        .PABITS = 32,
372        .insn_flags = CPU_MIPS32R2 | ASE_MICROMIPS,
373        .mmu_type = MMU_TYPE_R4000,
374    },
375    {
376        /* FIXME:
377         * Config3: VZ, CTXTC, CDMM, TL
378         * Config4: MMUExtDef
379         * Config5: MRP
380         * */
381        .name = "P5600",
382        .CP0_PRid = 0x0001A800,
383        .CP0_Config0 = MIPS_CONFIG0 | (1 << CP0C0_MM) | (1 << CP0C0_AR) |
384                    (MMU_TYPE_R4000 << CP0C0_MT),
385        .CP0_Config1 = MIPS_CONFIG1 | (0x3F << CP0C1_MMU) |
386                       (2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
387                       (2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
388                       (1 << CP0C1_PC) | (1 << CP0C1_FP),
389        .CP0_Config2 = MIPS_CONFIG2,
390        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) |
391                       (1 << CP0C3_CMGCR) | (1 << CP0C3_MSAP) |
392                       (1 << CP0C3_BP) | (1 << CP0C3_BI) | (1 << CP0C3_SC) |
393                       (1 << CP0C3_PW) | (1 << CP0C3_ULRI) | (1 << CP0C3_RXI) |
394                       (1 << CP0C3_LPA) | (1 << CP0C3_VInt),
395        .CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) | (2 << CP0C4_IE) |
396                       (0x1c << CP0C4_KScrExist),
397        .CP0_Config4_rw_bitmask = 0,
398        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_EVA) | (1 << CP0C5_MVH) |
399                       (1 << CP0C5_LLB) | (1 << CP0C5_MRP),
400        .CP0_Config5_rw_bitmask = (1 << CP0C5_K) | (1 << CP0C5_CV) |
401                                  (1 << CP0C5_MSAEn) | (1 << CP0C5_UFE) |
402                                  (1 << CP0C5_FRE) | (1 << CP0C5_UFR),
403        .CP0_Config7 = 1 << CP0C7_WII,
404        .CP0_LLAddr_rw_bitmask = 0,
405        .CP0_LLAddr_shift = 0,
406        .SYNCI_Step = 32,
407        .CCRes = 2,
408        .CP0_Status_rw_bitmask = 0x3C68FF1F,
409        .CP0_PageGrain_rw_bitmask = (1U << CP0PG_RIE) | (1 << CP0PG_XIE) |
410                    (1 << CP0PG_ELPA) | (1 << CP0PG_IEC),
411        .CP0_EBaseWG_rw_bitmask = (1 << CP0EBase_WG),
412        .CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_UFRP) | (1 << FCR0_HAS2008) |
413                    (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
414                    (1 << FCR0_D) | (1 << FCR0_S) | (0x03 << FCR0_PRID),
415        .CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
416        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
417        .SEGBITS = 32,
418        .PABITS = 40,
419        .insn_flags = CPU_MIPS32R5,
420        .mmu_type = MMU_TYPE_R4000,
421    },
422    {
423        /* A generic CPU supporting MIPS32 Release 6 ISA.
424           FIXME: Support IEEE 754-2008 FP.
425                  Eventually this should be replaced by a real CPU model. */
426        .name = "mips32r6-generic",
427        .CP0_PRid = 0x00010000,
428        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AR) |
429                       (MMU_TYPE_R4000 << CP0C0_MT),
430        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (31 << CP0C1_MMU) |
431                       (2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
432                       (2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
433                       (0 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
434        .CP0_Config2 = MIPS_CONFIG2,
435        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_BP) | (1 << CP0C3_BI) |
436                       (2 << CP0C3_ISA) | (1 << CP0C3_ULRI) |
437                       (1 << CP0C3_RXI) | (1U << CP0C3_M),
438        .CP0_Config4 = MIPS_CONFIG4 | (0xfc << CP0C4_KScrExist) |
439                       (3 << CP0C4_IE) | (1U << CP0C4_M),
440        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_XNP) | (1 << CP0C5_LLB),
441        .CP0_Config5_rw_bitmask = (1 << CP0C5_SBRI) | (1 << CP0C5_FRE) |
442                                  (1 << CP0C5_UFE),
443        .CP0_LLAddr_rw_bitmask = 0,
444        .CP0_LLAddr_shift = 0,
445        .SYNCI_Step = 32,
446        .CCRes = 2,
447        .CP0_Status_rw_bitmask = 0x3058FF1F,
448        .CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
449                         (1U << CP0PG_RIE),
450        .CP0_PageGrain_rw_bitmask = 0,
451        .CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
452                    (1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
453                    (1 << FCR0_S) | (0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
454        .CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
455        .CP1_fcr31_rw_bitmask = 0x0103FFFF,
456        .SEGBITS = 32,
457        .PABITS = 32,
458        .insn_flags = CPU_MIPS32R6 | ASE_MICROMIPS,
459        .mmu_type = MMU_TYPE_R4000,
460    },
461    {
462        .name = "I7200",
463        .CP0_PRid = 0x00010000,
464        .CP0_Config0 = MIPS_CONFIG0 | (1 << CP0C0_MM) | (0x2 << CP0C0_AR) |
465                        (MMU_TYPE_R4000 << CP0C0_MT),
466        .CP0_Config1 = (1U << CP0C1_M) | (15 << CP0C1_MMU) | (2 << CP0C1_IS) |
467                       (4 << CP0C1_IL) | (3 << CP0C1_IA) | (2 << CP0C1_DS) |
468                       (4 << CP0C1_DL) | (3 << CP0C1_DA) | (1 << CP0C1_PC) |
469                       (1 << CP0C1_EP),
470        .CP0_Config2 = MIPS_CONFIG2,
471        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_CMGCR) |
472                       (1 << CP0C3_BI) | (1 << CP0C3_SC) | (3 << CP0C3_MMAR) |
473                       (1 << CP0C3_ISA_ON_EXC) | (1 << CP0C3_ISA) |
474                       (1 << CP0C3_ULRI) | (1 << CP0C3_RXI) |
475                       (1 << CP0C3_DSP2P) | (1 << CP0C3_DSPP) |
476                       (1 << CP0C3_CTXTC) | (1 << CP0C3_VInt) |
477                       (1 << CP0C3_CDMM) | (1 << CP0C3_MT) | (1 << CP0C3_TL),
478        .CP0_Config4 = MIPS_CONFIG4 | (0xfc << CP0C4_KScrExist) |
479                       (2 << CP0C4_IE) | (1U << CP0C4_M),
480        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_MVH) | (1 << CP0C5_LLB),
481        .CP0_Config5_rw_bitmask = (1 << CP0C5_SBRI) | (1 << CP0C5_FRE) |
482                                  (1 << CP0C5_UFE),
483        .CP0_LLAddr_rw_bitmask = 0,
484        .CP0_LLAddr_shift = 0,
485        .SYNCI_Step = 32,
486        .CCRes = 2,
487        .CP0_Status_rw_bitmask = 0x3158FF1F,
488        .CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
489                         (1U << CP0PG_RIE),
490        .CP0_PageGrain_rw_bitmask = 0,
491        .CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
492                    (1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
493                    (1 << FCR0_S) | (0x02 << FCR0_PRID) | (0x0 << FCR0_REV),
494        .CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
495        .SEGBITS = 32,
496        .PABITS = 32,
497        .insn_flags = CPU_MIPS32R6 | ISA_NANOMIPS32 |
498                      ASE_DSP | ASE_DSP_R2 | ASE_DSP_R3 | ASE_MT,
499        .mmu_type = MMU_TYPE_R4000,
500    },
501#if defined(TARGET_MIPS64)
502    {
503        .name = "R4000",
504        .CP0_PRid = 0x00000400,
505        /* No L2 cache, icache size 8k, dcache size 8k, uncached coherency. */
506        .CP0_Config0 = (2 << CP0C0_Impl) | (1 << CP0C0_IC) | (1 << CP0C0_DC) |
507                       (2 << CP0C0_K0),
508        /* Note: Config1 is only used internally, the R4000 has only Config0. */
509        .CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
510        .CP0_LLAddr_rw_bitmask = 0xFFFFFFFF,
511        .CP0_LLAddr_shift = 4,
512        .SYNCI_Step = 16,
513        .CCRes = 2,
514        .CP0_Status_rw_bitmask = 0x3678FFFF,
515        /* The R4000 has a full 64bit FPU but doesn't use the fcr0 bits. */
516        .CP1_fcr0 = (0x5 << FCR0_PRID) | (0x0 << FCR0_REV),
517        .CP1_fcr31 = 0,
518        .CP1_fcr31_rw_bitmask = 0x0183FFFF,
519        .SEGBITS = 40,
520        .PABITS = 36,
521        .insn_flags = CPU_MIPS3,
522        .mmu_type = MMU_TYPE_R4000,
523    },
524    {
525        .name = "VR5432",
526        .CP0_PRid = 0x00005400,
527        /* No L2 cache, icache size 8k, dcache size 8k, uncached coherency. */
528        .CP0_Config0 = (2 << CP0C0_Impl) | (1 << CP0C0_IC) | (1 << CP0C0_DC) |
529                       (2 << CP0C0_K0),
530        .CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
531        .CP0_LLAddr_rw_bitmask = 0xFFFFFFFFL,
532        .CP0_LLAddr_shift = 4,
533        .SYNCI_Step = 16,
534        .CCRes = 2,
535        .CP0_Status_rw_bitmask = 0x3678FFFF,
536        /* The VR5432 has a full 64bit FPU but doesn't use the fcr0 bits. */
537        .CP1_fcr0 = (0x54 << FCR0_PRID) | (0x0 << FCR0_REV),
538        .CP1_fcr31 = 0,
539        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
540        .SEGBITS = 40,
541        .PABITS = 32,
542        .insn_flags = CPU_MIPS4 | INSN_VR54XX,
543        .mmu_type = MMU_TYPE_R4000,
544    },
545    {
546        .name = "5Kc",
547        .CP0_PRid = 0x00018100,
548        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
549                       (MMU_TYPE_R4000 << CP0C0_MT),
550        .CP0_Config1 = MIPS_CONFIG1 | (31 << CP0C1_MMU) |
551                       (1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
552                       (1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
553                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
554        .CP0_Config2 = MIPS_CONFIG2,
555        .CP0_Config3 = MIPS_CONFIG3,
556        .CP0_LLAddr_rw_bitmask = 0,
557        .CP0_LLAddr_shift = 4,
558        .SYNCI_Step = 32,
559        .CCRes = 2,
560        .CP0_Status_rw_bitmask = 0x12F8FFFF,
561        .SEGBITS = 42,
562        .PABITS = 36,
563        .insn_flags = CPU_MIPS64R1,
564        .mmu_type = MMU_TYPE_R4000,
565    },
566    {
567        .name = "5Kf",
568        .CP0_PRid = 0x00018100,
569        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
570                       (MMU_TYPE_R4000 << CP0C0_MT),
571        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (31 << CP0C1_MMU) |
572                       (1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
573                       (1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
574                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
575        .CP0_Config2 = MIPS_CONFIG2,
576        .CP0_Config3 = MIPS_CONFIG3,
577        .CP0_LLAddr_rw_bitmask = 0,
578        .CP0_LLAddr_shift = 4,
579        .SYNCI_Step = 32,
580        .CCRes = 2,
581        .CP0_Status_rw_bitmask = 0x36F8FFFF,
582        /* The 5Kf has F64 / L / W but doesn't use the fcr0 bits. */
583        .CP1_fcr0 = (1 << FCR0_D) | (1 << FCR0_S) |
584                    (0x81 << FCR0_PRID) | (0x0 << FCR0_REV),
585        .CP1_fcr31 = 0,
586        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
587        .SEGBITS = 42,
588        .PABITS = 36,
589        .insn_flags = CPU_MIPS64R1,
590        .mmu_type = MMU_TYPE_R4000,
591    },
592    {
593        .name = "20Kc",
594        /* We emulate a later version of the 20Kc, earlier ones had a broken
595           WAIT instruction. */
596        .CP0_PRid = 0x000182a0,
597        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
598                    (MMU_TYPE_R4000 << CP0C0_MT) | (1 << CP0C0_VI),
599        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (47 << CP0C1_MMU) |
600                       (2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
601                       (2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
602                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
603        .CP0_Config2 = MIPS_CONFIG2,
604        .CP0_Config3 = MIPS_CONFIG3,
605        .CP0_LLAddr_rw_bitmask = 0,
606        .CP0_LLAddr_shift = 0,
607        .SYNCI_Step = 32,
608        .CCRes = 1,
609        .CP0_Status_rw_bitmask = 0x36FBFFFF,
610        /* The 20Kc has F64 / L / W but doesn't use the fcr0 bits. */
611        .CP1_fcr0 = (1 << FCR0_3D) | (1 << FCR0_PS) |
612                    (1 << FCR0_D) | (1 << FCR0_S) |
613                    (0x82 << FCR0_PRID) | (0x0 << FCR0_REV),
614        .CP1_fcr31 = 0,
615        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
616        .SEGBITS = 40,
617        .PABITS = 36,
618        .insn_flags = CPU_MIPS64R1 | ASE_MIPS3D,
619        .mmu_type = MMU_TYPE_R4000,
620    },
621    {
622        /* A generic CPU providing MIPS64 Release 2 features.
623           FIXME: Eventually this should be replaced by a real CPU model. */
624        .name = "MIPS64R2-generic",
625        .CP0_PRid = 0x00010000,
626        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
627                       (MMU_TYPE_R4000 << CP0C0_MT),
628        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (63 << CP0C1_MMU) |
629                       (2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
630                       (2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
631                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
632        .CP0_Config2 = MIPS_CONFIG2,
633        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_LPA),
634        .CP0_LLAddr_rw_bitmask = 0,
635        .CP0_LLAddr_shift = 0,
636        .SYNCI_Step = 32,
637        .CCRes = 2,
638        .CP0_Status_rw_bitmask = 0x36FBFFFF,
639        .CP0_EBaseWG_rw_bitmask = (1 << CP0EBase_WG),
640        .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_3D) | (1 << FCR0_PS) |
641                    (1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
642                    (1 << FCR0_S) | (0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
643        .CP1_fcr31 = 0,
644        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
645        .SEGBITS = 42,
646        .PABITS = 36,
647        .insn_flags = CPU_MIPS64R2 | ASE_MIPS3D,
648        .mmu_type = MMU_TYPE_R4000,
649    },
650    {
651        .name = "5KEc",
652        .CP0_PRid = 0x00018900,
653        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
654                       (MMU_TYPE_R4000 << CP0C0_MT),
655        .CP0_Config1 = MIPS_CONFIG1 | (31 << CP0C1_MMU) |
656                       (1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
657                       (1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
658                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
659        .CP0_Config2 = MIPS_CONFIG2,
660        .CP0_Config3 = MIPS_CONFIG3,
661        .CP0_LLAddr_rw_bitmask = 0,
662        .CP0_LLAddr_shift = 4,
663        .SYNCI_Step = 32,
664        .CCRes = 2,
665        .CP0_Status_rw_bitmask = 0x12F8FFFF,
666        .SEGBITS = 42,
667        .PABITS = 36,
668        .insn_flags = CPU_MIPS64R2,
669        .mmu_type = MMU_TYPE_R4000,
670    },
671    {
672        .name = "5KEf",
673        .CP0_PRid = 0x00018900,
674        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
675                       (MMU_TYPE_R4000 << CP0C0_MT),
676        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (31 << CP0C1_MMU) |
677                       (1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
678                       (1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
679                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
680        .CP0_Config2 = MIPS_CONFIG2,
681        .CP0_Config3 = MIPS_CONFIG3,
682        .CP0_LLAddr_rw_bitmask = 0,
683        .CP0_LLAddr_shift = 4,
684        .SYNCI_Step = 32,
685        .CCRes = 2,
686        .CP0_Status_rw_bitmask = 0x36F8FFFF,
687        .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
688                    (1 << FCR0_D) | (1 << FCR0_S) |
689                    (0x89 << FCR0_PRID) | (0x0 << FCR0_REV),
690        .SEGBITS = 42,
691        .PABITS = 36,
692        .insn_flags = CPU_MIPS64R2,
693        .mmu_type = MMU_TYPE_R4000,
694    },
695    {
696        .name = "I6400",
697        .CP0_PRid = 0x1A900,
698        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AR) | (0x2 << CP0C0_AT) |
699                       (MMU_TYPE_R4000 << CP0C0_MT),
700        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
701                       (2 << CP0C1_IS) | (5 << CP0C1_IL) | (3 << CP0C1_IA) |
702                       (2 << CP0C1_DS) | (5 << CP0C1_DL) | (3 << CP0C1_DA) |
703                       (0 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
704        .CP0_Config2 = MIPS_CONFIG2,
705        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) |
706                       (1 << CP0C3_CMGCR) | (1 << CP0C3_MSAP) |
707                       (1 << CP0C3_BP) | (1 << CP0C3_BI) | (1 << CP0C3_ULRI) |
708                       (1 << CP0C3_RXI) | (1 << CP0C3_LPA) | (1 << CP0C3_VInt),
709        .CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) | (3 << CP0C4_IE) |
710                       (1 << CP0C4_AE) | (0xfc << CP0C4_KScrExist),
711        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_XNP) | (1 << CP0C5_VP) |
712                       (1 << CP0C5_LLB) | (1 << CP0C5_MRP),
713        .CP0_Config5_rw_bitmask = (1 << CP0C5_MSAEn) | (1 << CP0C5_SBRI) |
714                                  (1 << CP0C5_FRE) | (1 << CP0C5_UFE),
715        .CP0_LLAddr_rw_bitmask = 0,
716        .CP0_LLAddr_shift = 0,
717        .SYNCI_Step = 32,
718        .CCRes = 2,
719        .CP0_Status_rw_bitmask = 0x30D8FFFF,
720        .CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
721                         (1U << CP0PG_RIE),
722        .CP0_PageGrain_rw_bitmask = (1 << CP0PG_ELPA),
723        .CP0_EBaseWG_rw_bitmask = (1 << CP0EBase_WG),
724        .CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
725                    (1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
726                    (1 << FCR0_S) | (0x03 << FCR0_PRID) | (0x0 << FCR0_REV),
727        .CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
728        .CP1_fcr31_rw_bitmask = 0x0103FFFF,
729        .MSAIR = 0x03 << MSAIR_ProcID,
730        .SEGBITS = 48,
731        .PABITS = 48,
732        .insn_flags = CPU_MIPS64R6,
733        .mmu_type = MMU_TYPE_R4000,
734    },
735    {
736        .name = "I6500",
737        .CP0_PRid = 0x1B000,
738        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AR) | (0x2 << CP0C0_AT) |
739                       (MMU_TYPE_R4000 << CP0C0_MT),
740        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
741                       (2 << CP0C1_IS) | (5 << CP0C1_IL) | (3 << CP0C1_IA) |
742                       (2 << CP0C1_DS) | (5 << CP0C1_DL) | (3 << CP0C1_DA) |
743                       (0 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
744        .CP0_Config2 = MIPS_CONFIG2,
745        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) |
746                       (1 << CP0C3_CMGCR) | (1 << CP0C3_MSAP) |
747                       (1 << CP0C3_BP) | (1 << CP0C3_BI) | (1 << CP0C3_ULRI) |
748                       (1 << CP0C3_RXI) | (1 << CP0C3_LPA) | (1 << CP0C3_VInt),
749        .CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) | (3 << CP0C4_IE) |
750                       (1 << CP0C4_AE) | (0xfc << CP0C4_KScrExist),
751        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_XNP) | (1 << CP0C5_VP) |
752                       (1 << CP0C5_LLB) | (1 << CP0C5_MRP),
753        .CP0_Config5_rw_bitmask = (1 << CP0C5_MSAEn) | (1 << CP0C5_SBRI) |
754                                  (1 << CP0C5_FRE) | (1 << CP0C5_UFE),
755        .CP0_LLAddr_rw_bitmask = 0,
756        .CP0_LLAddr_shift = 0,
757        .SYNCI_Step = 64,
758        .CCRes = 2,
759        .CP0_Status_rw_bitmask = 0x30D8FFFF,
760        .CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
761                         (1U << CP0PG_RIE),
762        .CP0_PageGrain_rw_bitmask = (1 << CP0PG_ELPA),
763        .CP0_EBaseWG_rw_bitmask = (1 << CP0EBase_WG),
764        .CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
765                    (1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
766                    (1 << FCR0_S) | (0x03 << FCR0_PRID) | (0x0 << FCR0_REV),
767        .CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
768        .CP1_fcr31_rw_bitmask = 0x0103FFFF,
769        .MSAIR = 0x03 << MSAIR_ProcID,
770        .SEGBITS = 48,
771        .PABITS = 48,
772        .insn_flags = CPU_MIPS64R6,
773        .mmu_type = MMU_TYPE_R4000,
774    },
775    {
776        .name = "Loongson-2E",
777        .CP0_PRid = 0x6302,
778        /* 64KB I-cache and d-cache. 4 way with 32 bit cache line size.  */
779        .CP0_Config0 = (3 << CP0C0_Impl) | (4 << CP0C0_IC) | (4 << CP0C0_DC) |
780                       (1 << CP0C0_IB) | (1 << CP0C0_DB) | (0x2 << CP0C0_K0),
781        /* Note: Config1 is only used internally,
782           Loongson-2E has only Config0.  */
783        .CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
784        .SYNCI_Step = 16,
785        .CCRes = 2,
786        .CP0_Status_rw_bitmask = 0x35D0FFFF,
787        .CP1_fcr0 = (0x5 << FCR0_PRID) | (0x1 << FCR0_REV),
788        .CP1_fcr31 = 0,
789        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
790        .SEGBITS = 40,
791        .PABITS = 40,
792        .insn_flags = CPU_MIPS3 | INSN_LOONGSON2E,
793        .mmu_type = MMU_TYPE_R4000,
794    },
795    {
796        .name = "Loongson-2F",
797        .CP0_PRid = 0x6303,
798        /* 64KB I-cache and d-cache. 4 way with 32 bit cache line size.  */
799        .CP0_Config0 = (3 << CP0C0_Impl) | (4 << CP0C0_IC) | (4 << CP0C0_DC) |
800                       (1 << CP0C0_IB) | (1 << CP0C0_DB) | (0x2 << CP0C0_K0),
801        /* Note: Config1 is only used internally,
802           Loongson-2F has only Config0.  */
803        .CP0_Config1 = (1 << CP0C1_FP) | (47 << CP0C1_MMU),
804        .SYNCI_Step = 16,
805        .CCRes = 2,
806        .CP0_Status_rw_bitmask = 0xF5D0FF1F,   /* Bits 7:5 not writable.  */
807        .CP1_fcr0 = (0x5 << FCR0_PRID) | (0x1 << FCR0_REV),
808        .CP1_fcr31 = 0,
809        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
810        .SEGBITS = 40,
811        .PABITS = 40,
812        .insn_flags = CPU_MIPS3 | INSN_LOONGSON2F | ASE_LMMI,
813        .mmu_type = MMU_TYPE_R4000,
814    },
815    {
816        .name = "Loongson-3A1000", /* Loongson-3A R1, GS464-based */
817        .CP0_PRid = 0x6305,
818        /* 64KB I-cache and d-cache. 4 way with 32 bit cache line size.  */
819        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
820                       (MMU_TYPE_R4000 << CP0C0_MT),
821        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (63 << CP0C1_MMU) |
822                       (3 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
823                       (3 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
824                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
825        .CP0_Config2 = MIPS_CONFIG2 | (7 << CP0C2_SS) | (4 << CP0C2_SL) |
826                       (3 << CP0C2_SA),
827        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_LPA),
828        .CP0_LLAddr_rw_bitmask = 0,
829        .SYNCI_Step = 32,
830        .CCRes = 2,
831        .CP0_Status_rw_bitmask = 0x74D8FFFF,
832        .CP0_PageGrain = (1 << CP0PG_ELPA),
833        .CP0_PageGrain_rw_bitmask = (1 << CP0PG_ELPA),
834        .CP1_fcr0 = (0x5 << FCR0_PRID) | (0x1 << FCR0_REV) | (0x1 << FCR0_F64) |
835                    (0x1 << FCR0_PS) | (0x1 << FCR0_L) | (0x1 << FCR0_W) |
836                    (0x1 << FCR0_D) | (0x1 << FCR0_S),
837        .CP1_fcr31 = 0,
838        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
839        .SEGBITS = 48,
840        .PABITS = 48,
841        .insn_flags = CPU_MIPS64R2 | INSN_LOONGSON3A |
842                      ASE_LMMI | ASE_LEXT,
843        .mmu_type = MMU_TYPE_R4000,
844    },
845    {
846        .name = "Loongson-3A4000", /* Loongson-3A R4, GS464V-based */
847        .CP0_PRid = 0x14C000,
848        /* 64KB I-cache and d-cache. 4 way with 32 bit cache line size.  */
849        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
850                       (MMU_TYPE_R4000 << CP0C0_MT),
851        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (63 << CP0C1_MMU) |
852                       (2 << CP0C1_IS) | (5 << CP0C1_IL) | (3 << CP0C1_IA) |
853                       (2 << CP0C1_DS) | (5 << CP0C1_DL) | (3 << CP0C1_DA) |
854                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
855        .CP0_Config2 = MIPS_CONFIG2 | (5 << CP0C2_SS) | (5 << CP0C2_SL) |
856                       (15 << CP0C2_SA),
857        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_MSAP) |
858                       (1 << CP0C3_BP) | (1 << CP0C3_BI) | (1 << CP0C3_ULRI) |
859                       (1 << CP0C3_RXI) | (1 << CP0C3_LPA) | (1 << CP0C3_VInt),
860        .CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) | (2 << CP0C4_IE) |
861                       (1 << CP0C4_AE) | (0x1c << CP0C4_KScrExist),
862        .CP0_Config4_rw_bitmask = 0,
863        .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_CRCP) | (1 << CP0C5_NFExists),
864        .CP0_Config5_rw_bitmask = (1 << CP0C5_K) | (1 << CP0C5_CV) |
865                                  (1 << CP0C5_MSAEn) | (1 << CP0C5_UFE) |
866                                  (1 << CP0C5_FRE) | (1 << CP0C5_SBRI),
867        .CP0_Config6 = (1 << CP0C6_VCLRU) | (1 << CP0C6_DCLRU) |
868                       (1 << CP0C6_SFBEN) | (1 << CP0C6_VLTINT) |
869                       (1 << CP0C6_INSTPREF) | (1 << CP0C6_DATAPREF),
870        .CP0_Config6_rw_bitmask = (1 << CP0C6_BPPASS) | (0x3f << CP0C6_KPOS) |
871                       (1 << CP0C6_KE) | (1 << CP0C6_VTLBONLY) |
872                       (1 << CP0C6_LASX) | (1 << CP0C6_SSEN) |
873                       (1 << CP0C6_DISDRTIME) | (1 << CP0C6_PIXNUEN) |
874                       (1 << CP0C6_SCRAND) | (1 << CP0C6_LLEXCEN) |
875                       (1 << CP0C6_DISVC) | (1 << CP0C6_VCLRU) |
876                       (1 << CP0C6_DCLRU) | (1 << CP0C6_PIXUEN) |
877                       (1 << CP0C6_DISBLKLYEN) | (1 << CP0C6_UMEMUALEN) |
878                       (1 << CP0C6_SFBEN) | (1 << CP0C6_FLTINT) |
879                       (1 << CP0C6_VLTINT) | (1 << CP0C6_DISBTB) |
880                       (3 << CP0C6_STPREFCTL) | (1 << CP0C6_INSTPREF) |
881                       (1 << CP0C6_DATAPREF),
882        .CP0_Config7 = 0,
883        .CP0_Config7_rw_bitmask = (1 << CP0C7_NAPCGEN) | (1 << CP0C7_UNIMUEN) |
884                                  (1 << CP0C7_VFPUCGEN),
885        .CP0_LLAddr_rw_bitmask = 1,
886        .SYNCI_Step = 16,
887        .CCRes = 2,
888        .CP0_Status_rw_bitmask = 0x7DDBFFFF,
889        .CP0_PageGrain = (1 << CP0PG_ELPA),
890        .CP0_PageGrain_rw_bitmask = (1U << CP0PG_RIE) | (1 << CP0PG_XIE) |
891                    (1 << CP0PG_ELPA) | (1 << CP0PG_IEC),
892        .CP1_fcr0 = (0x5 << FCR0_PRID) | (0x1 << FCR0_REV) | (0x1 << FCR0_F64) |
893                    (0x1 << FCR0_PS) | (0x1 << FCR0_L) | (0x1 << FCR0_W) |
894                    (0x1 << FCR0_D) | (0x1 << FCR0_S),
895        .CP1_fcr31 = 0,
896        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
897        .MSAIR = (0x01 << MSAIR_ProcID) | (0x40 << MSAIR_Rev),
898        .SEGBITS = 48,
899        .PABITS = 48,
900        .insn_flags = CPU_MIPS64R2 | INSN_LOONGSON3A |
901                      ASE_LMMI | ASE_LEXT,
902        .mmu_type = MMU_TYPE_R4000,
903    },
904    {
905        /* A generic CPU providing MIPS64 DSP R2 ASE features.
906           FIXME: Eventually this should be replaced by a real CPU model. */
907        .name = "mips64dspr2",
908        .CP0_PRid = 0x00010000,
909        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
910                       (MMU_TYPE_R4000 << CP0C0_MT),
911        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (63 << CP0C1_MMU) |
912                       (2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
913                       (2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
914                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
915        .CP0_Config2 = MIPS_CONFIG2,
916        .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_DSP2P) |
917                       (1 << CP0C3_DSPP) | (1 << CP0C3_LPA),
918        .CP0_LLAddr_rw_bitmask = 0,
919        .CP0_LLAddr_shift = 0,
920        .SYNCI_Step = 32,
921        .CCRes = 2,
922        .CP0_Status_rw_bitmask = 0x37FBFFFF,
923        .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_3D) | (1 << FCR0_PS) |
924                    (1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
925                    (1 << FCR0_S) | (0x00 << FCR0_PRID) | (0x0 << FCR0_REV),
926        .CP1_fcr31 = 0,
927        .CP1_fcr31_rw_bitmask = 0xFF83FFFF,
928        .SEGBITS = 42,
929        .PABITS = 36,
930        .insn_flags = CPU_MIPS64R2 | ASE_DSP | ASE_DSP_R2,
931        .mmu_type = MMU_TYPE_R4000,
932    },
933    {
934        /*
935         * Octeon 68xx with MIPS64 Cavium Octeon features.
936         */
937        .name = "Octeon68XX",
938        .CP0_PRid = 0x000D9100,
939        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) | (0x2 << CP0C0_AT) |
940                       (MMU_TYPE_R4000 << CP0C0_MT),
941        .CP0_Config1 = MIPS_CONFIG1 | (0x3F << CP0C1_MMU) |
942                       (1 << CP0C1_IS) | (4 << CP0C1_IL) | (1 << CP0C1_IA) |
943                       (1 << CP0C1_DS) | (4 << CP0C1_DL) | (1 << CP0C1_DA) |
944                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
945        .CP0_Config2 = MIPS_CONFIG2,
946        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_LPA),
947        .CP0_Config4 = MIPS_CONFIG4 | (1U << CP0C4_M) |
948                       (0x3c << CP0C4_KScrExist) | (1U << CP0C4_MMUExtDef) |
949                       (3U << CP0C4_MMUSizeExt),
950        .CP0_LLAddr_rw_bitmask = 0,
951        .CP0_LLAddr_shift = 4,
952        .CP0_PageGrain = (1 << CP0PG_ELPA),
953        .SYNCI_Step = 32,
954        .CCRes = 2,
955        .CP0_Status_rw_bitmask = 0x12F8FFFF,
956        .SEGBITS = 42,
957        .PABITS = 49,
958        .insn_flags = CPU_MIPS64R2 | INSN_OCTEON,
959        .mmu_type = MMU_TYPE_R4000,
960    },
961
962#endif
963};
964const int mips_defs_number = ARRAY_SIZE(mips_defs);
965
966void mips_cpu_list(void)
967{
968    int i;
969
970    for (i = 0; i < ARRAY_SIZE(mips_defs); i++) {
971        qemu_printf("MIPS '%s'\n", mips_defs[i].name);
972    }
973}
974
975static void fpu_init (CPUMIPSState *env, const mips_def_t *def)
976{
977    int i;
978
979    for (i = 0; i < MIPS_FPU_MAX; i++)
980        env->fpus[i].fcr0 = def->CP1_fcr0;
981
982    memcpy(&env->active_fpu, &env->fpus[0], sizeof(env->active_fpu));
983}
984
985static void mvp_init(CPUMIPSState *env)
986{
987    env->mvp = g_malloc0(sizeof(CPUMIPSMVPContext));
988
989    if (!ase_mt_available(env)) {
990        return;
991    }
992
993    /* MVPConf1 implemented, TLB sharable, no gating storage support,
994       programmable cache partitioning implemented, number of allocatable
995       and shareable TLB entries, MVP has allocatable TCs, 2 VPEs
996       implemented, 5 TCs implemented. */
997    env->mvp->CP0_MVPConf0 = (1U << CP0MVPC0_M) | (1 << CP0MVPC0_TLBS) |
998                             (0 << CP0MVPC0_GS) | (1 << CP0MVPC0_PCP) |
999// TODO: actually do 2 VPEs.
1000//                             (1 << CP0MVPC0_TCA) | (0x1 << CP0MVPC0_PVPE) |
1001//                             (0x04 << CP0MVPC0_PTC);
1002                             (1 << CP0MVPC0_TCA) | (0x0 << CP0MVPC0_PVPE) |
1003                             (0x00 << CP0MVPC0_PTC);
1004#if !defined(CONFIG_USER_ONLY)
1005    /* Usermode has no TLB support */
1006    env->mvp->CP0_MVPConf0 |= (env->tlb->nb_tlb << CP0MVPC0_PTLBE);
1007#endif
1008
1009    /* Allocatable CP1 have media extensions, allocatable CP1 have FP support,
1010       no UDI implemented, no CP2 implemented, 1 CP1 implemented. */
1011    env->mvp->CP0_MVPConf1 = (1U << CP0MVPC1_CIM) | (1 << CP0MVPC1_CIF) |
1012                             (0x0 << CP0MVPC1_PCX) | (0x0 << CP0MVPC1_PCP2) |
1013                             (0x1 << CP0MVPC1_PCP1);
1014}
1015