1 /* 2 * ARM virtual CPU header 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2.1 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 #ifndef ARM_CPU_H 21 #define ARM_CPU_H 22 23 #include "kvm-consts.h" 24 #include "hw/registerfields.h" 25 #include "cpu-qom.h" 26 #include "exec/cpu-defs.h" 27 #include "qapi/qapi-types-common.h" 28 29 /* ARM processors have a weak memory model */ 30 #define TCG_GUEST_DEFAULT_MO (0) 31 32 #ifdef TARGET_AARCH64 33 #define KVM_HAVE_MCE_INJECTION 1 34 #endif 35 36 #define EXCP_UDEF 1 /* undefined instruction */ 37 #define EXCP_SWI 2 /* software interrupt */ 38 #define EXCP_PREFETCH_ABORT 3 39 #define EXCP_DATA_ABORT 4 40 #define EXCP_IRQ 5 41 #define EXCP_FIQ 6 42 #define EXCP_BKPT 7 43 #define EXCP_EXCEPTION_EXIT 8 /* Return from v7M exception. */ 44 #define EXCP_KERNEL_TRAP 9 /* Jumped to kernel code page. */ 45 #define EXCP_HVC 11 /* HyperVisor Call */ 46 #define EXCP_HYP_TRAP 12 47 #define EXCP_SMC 13 /* Secure Monitor Call */ 48 #define EXCP_VIRQ 14 49 #define EXCP_VFIQ 15 50 #define EXCP_SEMIHOST 16 /* semihosting call */ 51 #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ 52 #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ 53 #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ 54 #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ 55 #define EXCP_LSERR 21 /* v8M LSERR SecureFault */ 56 #define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ 57 #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ 58 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ 59 60 #define ARMV7M_EXCP_RESET 1 61 #define ARMV7M_EXCP_NMI 2 62 #define ARMV7M_EXCP_HARD 3 63 #define ARMV7M_EXCP_MEM 4 64 #define ARMV7M_EXCP_BUS 5 65 #define ARMV7M_EXCP_USAGE 6 66 #define ARMV7M_EXCP_SECURE 7 67 #define ARMV7M_EXCP_SVC 11 68 #define ARMV7M_EXCP_DEBUG 12 69 #define ARMV7M_EXCP_PENDSV 14 70 #define ARMV7M_EXCP_SYSTICK 15 71 72 /* For M profile, some registers are banked secure vs non-secure; 73 * these are represented as a 2-element array where the first element 74 * is the non-secure copy and the second is the secure copy. 75 * When the CPU does not have implement the security extension then 76 * only the first element is used. 77 * This means that the copy for the current security state can be 78 * accessed via env->registerfield[env->v7m.secure] (whether the security 79 * extension is implemented or not). 80 */ 81 enum { 82 M_REG_NS = 0, 83 M_REG_S = 1, 84 M_REG_NUM_BANKS = 2, 85 }; 86 87 /* ARM-specific interrupt pending bits. */ 88 #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 89 #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 90 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 91 92 /* The usual mapping for an AArch64 system register to its AArch32 93 * counterpart is for the 32 bit world to have access to the lower 94 * half only (with writes leaving the upper half untouched). It's 95 * therefore useful to be able to pass TCG the offset of the least 96 * significant half of a uint64_t struct member. 97 */ 98 #ifdef HOST_WORDS_BIGENDIAN 99 #define offsetoflow32(S, M) (offsetof(S, M) + sizeof(uint32_t)) 100 #define offsetofhigh32(S, M) offsetof(S, M) 101 #else 102 #define offsetoflow32(S, M) offsetof(S, M) 103 #define offsetofhigh32(S, M) (offsetof(S, M) + sizeof(uint32_t)) 104 #endif 105 106 /* Meanings of the ARMCPU object's four inbound GPIO lines */ 107 #define ARM_CPU_IRQ 0 108 #define ARM_CPU_FIQ 1 109 #define ARM_CPU_VIRQ 2 110 #define ARM_CPU_VFIQ 3 111 112 /* ARM-specific extra insn start words: 113 * 1: Conditional execution bits 114 * 2: Partial exception syndrome for data aborts 115 */ 116 #define TARGET_INSN_START_EXTRA_WORDS 2 117 118 /* The 2nd extra word holding syndrome info for data aborts does not use 119 * the upper 6 bits nor the lower 14 bits. We mask and shift it down to 120 * help the sleb128 encoder do a better job. 121 * When restoring the CPU state, we shift it back up. 122 */ 123 #define ARM_INSN_START_WORD2_MASK ((1 << 26) - 1) 124 #define ARM_INSN_START_WORD2_SHIFT 14 125 126 /* We currently assume float and double are IEEE single and double 127 precision respectively. 128 Doing runtime conversions is tricky because VFP registers may contain 129 integer values (eg. as the result of a FTOSI instruction). 130 s<2n> maps to the least significant half of d<n> 131 s<2n+1> maps to the most significant half of d<n> 132 */ 133 134 /** 135 * DynamicGDBXMLInfo: 136 * @desc: Contains the XML descriptions. 137 * @num: Number of the registers in this XML seen by GDB. 138 * @data: A union with data specific to the set of registers 139 * @cpregs_keys: Array that contains the corresponding Key of 140 * a given cpreg with the same order of the cpreg 141 * in the XML description. 142 */ 143 typedef struct DynamicGDBXMLInfo { 144 char *desc; 145 int num; 146 union { 147 struct { 148 uint32_t *keys; 149 } cpregs; 150 } data; 151 } DynamicGDBXMLInfo; 152 153 /* CPU state for each instance of a generic timer (in cp15 c14) */ 154 typedef struct ARMGenericTimer { 155 uint64_t cval; /* Timer CompareValue register */ 156 uint64_t ctl; /* Timer Control register */ 157 } ARMGenericTimer; 158 159 #define GTIMER_PHYS 0 160 #define GTIMER_VIRT 1 161 #define GTIMER_HYP 2 162 #define GTIMER_SEC 3 163 #define GTIMER_HYPVIRT 4 164 #define NUM_GTIMERS 5 165 166 typedef struct { 167 uint64_t raw_tcr; 168 uint32_t mask; 169 uint32_t base_mask; 170 } TCR; 171 172 #define VTCR_NSW (1u << 29) 173 #define VTCR_NSA (1u << 30) 174 #define VSTCR_SW VTCR_NSW 175 #define VSTCR_SA VTCR_NSA 176 177 /* Define a maximum sized vector register. 178 * For 32-bit, this is a 128-bit NEON/AdvSIMD register. 179 * For 64-bit, this is a 2048-bit SVE register. 180 * 181 * Note that the mapping between S, D, and Q views of the register bank 182 * differs between AArch64 and AArch32. 183 * In AArch32: 184 * Qn = regs[n].d[1]:regs[n].d[0] 185 * Dn = regs[n / 2].d[n & 1] 186 * Sn = regs[n / 4].d[n % 4 / 2], 187 * bits 31..0 for even n, and bits 63..32 for odd n 188 * (and regs[16] to regs[31] are inaccessible) 189 * In AArch64: 190 * Zn = regs[n].d[*] 191 * Qn = regs[n].d[1]:regs[n].d[0] 192 * Dn = regs[n].d[0] 193 * Sn = regs[n].d[0] bits 31..0 194 * Hn = regs[n].d[0] bits 15..0 195 * 196 * This corresponds to the architecturally defined mapping between 197 * the two execution states, and means we do not need to explicitly 198 * map these registers when changing states. 199 * 200 * Align the data for use with TCG host vector operations. 201 */ 202 203 #ifdef TARGET_AARCH64 204 # define ARM_MAX_VQ 16 205 void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp); 206 void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp); 207 #else 208 # define ARM_MAX_VQ 1 209 static inline void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { } 210 static inline void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp) { } 211 #endif 212 213 typedef struct ARMVectorReg { 214 uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); 215 } ARMVectorReg; 216 217 #ifdef TARGET_AARCH64 218 /* In AArch32 mode, predicate registers do not exist at all. */ 219 typedef struct ARMPredicateReg { 220 uint64_t p[DIV_ROUND_UP(2 * ARM_MAX_VQ, 8)] QEMU_ALIGNED(16); 221 } ARMPredicateReg; 222 223 /* In AArch32 mode, PAC keys do not exist at all. */ 224 typedef struct ARMPACKey { 225 uint64_t lo, hi; 226 } ARMPACKey; 227 #endif 228 229 /* See the commentary above the TBFLAG field definitions. */ 230 typedef struct CPUARMTBFlags { 231 uint32_t flags; 232 target_ulong flags2; 233 } CPUARMTBFlags; 234 235 typedef struct CPUARMState { 236 /* Regs for current mode. */ 237 uint32_t regs[16]; 238 239 /* 32/64 switch only happens when taking and returning from 240 * exceptions so the overlap semantics are taken care of then 241 * instead of having a complicated union. 242 */ 243 /* Regs for A64 mode. */ 244 uint64_t xregs[32]; 245 uint64_t pc; 246 /* PSTATE isn't an architectural register for ARMv8. However, it is 247 * convenient for us to assemble the underlying state into a 32 bit format 248 * identical to the architectural format used for the SPSR. (This is also 249 * what the Linux kernel's 'pstate' field in signal handlers and KVM's 250 * 'pstate' register are.) Of the PSTATE bits: 251 * NZCV are kept in the split out env->CF/VF/NF/ZF, (which have the same 252 * semantics as for AArch32, as described in the comments on each field) 253 * nRW (also known as M[4]) is kept, inverted, in env->aarch64 254 * DAIF (exception masks) are kept in env->daif 255 * BTYPE is kept in env->btype 256 * all other bits are stored in their correct places in env->pstate 257 */ 258 uint32_t pstate; 259 uint32_t aarch64; /* 1 if CPU is in aarch64 state; inverse of PSTATE.nRW */ 260 261 /* Cached TBFLAGS state. See below for which bits are included. */ 262 CPUARMTBFlags hflags; 263 264 /* Frequently accessed CPSR bits are stored separately for efficiency. 265 This contains all the other bits. Use cpsr_{read,write} to access 266 the whole CPSR. */ 267 uint32_t uncached_cpsr; 268 uint32_t spsr; 269 270 /* Banked registers. */ 271 uint64_t banked_spsr[8]; 272 uint32_t banked_r13[8]; 273 uint32_t banked_r14[8]; 274 275 /* These hold r8-r12. */ 276 uint32_t usr_regs[5]; 277 uint32_t fiq_regs[5]; 278 279 /* cpsr flag cache for faster execution */ 280 uint32_t CF; /* 0 or 1 */ 281 uint32_t VF; /* V is the bit 31. All other bits are undefined */ 282 uint32_t NF; /* N is bit 31. All other bits are undefined. */ 283 uint32_t ZF; /* Z set if zero. */ 284 uint32_t QF; /* 0 or 1 */ 285 uint32_t GE; /* cpsr[19:16] */ 286 uint32_t thumb; /* cpsr[5]. 0 = arm mode, 1 = thumb mode. */ 287 uint32_t condexec_bits; /* IT bits. cpsr[15:10,26:25]. */ 288 uint32_t btype; /* BTI branch type. spsr[11:10]. */ 289 uint64_t daif; /* exception masks, in the bits they are in PSTATE */ 290 291 uint64_t elr_el[4]; /* AArch64 exception link regs */ 292 uint64_t sp_el[4]; /* AArch64 banked stack pointers */ 293 294 /* System control coprocessor (cp15) */ 295 struct { 296 uint32_t c0_cpuid; 297 union { /* Cache size selection */ 298 struct { 299 uint64_t _unused_csselr0; 300 uint64_t csselr_ns; 301 uint64_t _unused_csselr1; 302 uint64_t csselr_s; 303 }; 304 uint64_t csselr_el[4]; 305 }; 306 union { /* System control register. */ 307 struct { 308 uint64_t _unused_sctlr; 309 uint64_t sctlr_ns; 310 uint64_t hsctlr; 311 uint64_t sctlr_s; 312 }; 313 uint64_t sctlr_el[4]; 314 }; 315 uint64_t cpacr_el1; /* Architectural feature access control register */ 316 uint64_t cptr_el[4]; /* ARMv8 feature trap registers */ 317 uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ 318 uint64_t sder; /* Secure debug enable register. */ 319 uint32_t nsacr; /* Non-secure access control register. */ 320 union { /* MMU translation table base 0. */ 321 struct { 322 uint64_t _unused_ttbr0_0; 323 uint64_t ttbr0_ns; 324 uint64_t _unused_ttbr0_1; 325 uint64_t ttbr0_s; 326 }; 327 uint64_t ttbr0_el[4]; 328 }; 329 union { /* MMU translation table base 1. */ 330 struct { 331 uint64_t _unused_ttbr1_0; 332 uint64_t ttbr1_ns; 333 uint64_t _unused_ttbr1_1; 334 uint64_t ttbr1_s; 335 }; 336 uint64_t ttbr1_el[4]; 337 }; 338 uint64_t vttbr_el2; /* Virtualization Translation Table Base. */ 339 uint64_t vsttbr_el2; /* Secure Virtualization Translation Table. */ 340 /* MMU translation table base control. */ 341 TCR tcr_el[4]; 342 TCR vtcr_el2; /* Virtualization Translation Control. */ 343 TCR vstcr_el2; /* Secure Virtualization Translation Control. */ 344 uint32_t c2_data; /* MPU data cacheable bits. */ 345 uint32_t c2_insn; /* MPU instruction cacheable bits. */ 346 union { /* MMU domain access control register 347 * MPU write buffer control. 348 */ 349 struct { 350 uint64_t dacr_ns; 351 uint64_t dacr_s; 352 }; 353 struct { 354 uint64_t dacr32_el2; 355 }; 356 }; 357 uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */ 358 uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */ 359 uint64_t hcr_el2; /* Hypervisor configuration register */ 360 uint64_t scr_el3; /* Secure configuration register. */ 361 union { /* Fault status registers. */ 362 struct { 363 uint64_t ifsr_ns; 364 uint64_t ifsr_s; 365 }; 366 struct { 367 uint64_t ifsr32_el2; 368 }; 369 }; 370 union { 371 struct { 372 uint64_t _unused_dfsr; 373 uint64_t dfsr_ns; 374 uint64_t hsr; 375 uint64_t dfsr_s; 376 }; 377 uint64_t esr_el[4]; 378 }; 379 uint32_t c6_region[8]; /* MPU base/size registers. */ 380 union { /* Fault address registers. */ 381 struct { 382 uint64_t _unused_far0; 383 #ifdef HOST_WORDS_BIGENDIAN 384 uint32_t ifar_ns; 385 uint32_t dfar_ns; 386 uint32_t ifar_s; 387 uint32_t dfar_s; 388 #else 389 uint32_t dfar_ns; 390 uint32_t ifar_ns; 391 uint32_t dfar_s; 392 uint32_t ifar_s; 393 #endif 394 uint64_t _unused_far3; 395 }; 396 uint64_t far_el[4]; 397 }; 398 uint64_t hpfar_el2; 399 uint64_t hstr_el2; 400 union { /* Translation result. */ 401 struct { 402 uint64_t _unused_par_0; 403 uint64_t par_ns; 404 uint64_t _unused_par_1; 405 uint64_t par_s; 406 }; 407 uint64_t par_el[4]; 408 }; 409 410 uint32_t c9_insn; /* Cache lockdown registers. */ 411 uint32_t c9_data; 412 uint64_t c9_pmcr; /* performance monitor control register */ 413 uint64_t c9_pmcnten; /* perf monitor counter enables */ 414 uint64_t c9_pmovsr; /* perf monitor overflow status */ 415 uint64_t c9_pmuserenr; /* perf monitor user enable */ 416 uint64_t c9_pmselr; /* perf monitor counter selection register */ 417 uint64_t c9_pminten; /* perf monitor interrupt enables */ 418 union { /* Memory attribute redirection */ 419 struct { 420 #ifdef HOST_WORDS_BIGENDIAN 421 uint64_t _unused_mair_0; 422 uint32_t mair1_ns; 423 uint32_t mair0_ns; 424 uint64_t _unused_mair_1; 425 uint32_t mair1_s; 426 uint32_t mair0_s; 427 #else 428 uint64_t _unused_mair_0; 429 uint32_t mair0_ns; 430 uint32_t mair1_ns; 431 uint64_t _unused_mair_1; 432 uint32_t mair0_s; 433 uint32_t mair1_s; 434 #endif 435 }; 436 uint64_t mair_el[4]; 437 }; 438 union { /* vector base address register */ 439 struct { 440 uint64_t _unused_vbar; 441 uint64_t vbar_ns; 442 uint64_t hvbar; 443 uint64_t vbar_s; 444 }; 445 uint64_t vbar_el[4]; 446 }; 447 uint32_t mvbar; /* (monitor) vector base address register */ 448 struct { /* FCSE PID. */ 449 uint32_t fcseidr_ns; 450 uint32_t fcseidr_s; 451 }; 452 union { /* Context ID. */ 453 struct { 454 uint64_t _unused_contextidr_0; 455 uint64_t contextidr_ns; 456 uint64_t _unused_contextidr_1; 457 uint64_t contextidr_s; 458 }; 459 uint64_t contextidr_el[4]; 460 }; 461 union { /* User RW Thread register. */ 462 struct { 463 uint64_t tpidrurw_ns; 464 uint64_t tpidrprw_ns; 465 uint64_t htpidr; 466 uint64_t _tpidr_el3; 467 }; 468 uint64_t tpidr_el[4]; 469 }; 470 /* The secure banks of these registers don't map anywhere */ 471 uint64_t tpidrurw_s; 472 uint64_t tpidrprw_s; 473 uint64_t tpidruro_s; 474 475 union { /* User RO Thread register. */ 476 uint64_t tpidruro_ns; 477 uint64_t tpidrro_el[1]; 478 }; 479 uint64_t c14_cntfrq; /* Counter Frequency register */ 480 uint64_t c14_cntkctl; /* Timer Control register */ 481 uint32_t cnthctl_el2; /* Counter/Timer Hyp Control register */ 482 uint64_t cntvoff_el2; /* Counter Virtual Offset register */ 483 ARMGenericTimer c14_timer[NUM_GTIMERS]; 484 uint32_t c15_cpar; /* XScale Coprocessor Access Register */ 485 uint32_t c15_ticonfig; /* TI925T configuration byte. */ 486 uint32_t c15_i_max; /* Maximum D-cache dirty line index. */ 487 uint32_t c15_i_min; /* Minimum D-cache dirty line index. */ 488 uint32_t c15_threadid; /* TI debugger thread-ID. */ 489 uint32_t c15_config_base_address; /* SCU base address. */ 490 uint32_t c15_diagnostic; /* diagnostic register */ 491 uint32_t c15_power_diagnostic; 492 uint32_t c15_power_control; /* power control */ 493 uint64_t dbgbvr[16]; /* breakpoint value registers */ 494 uint64_t dbgbcr[16]; /* breakpoint control registers */ 495 uint64_t dbgwvr[16]; /* watchpoint value registers */ 496 uint64_t dbgwcr[16]; /* watchpoint control registers */ 497 uint64_t mdscr_el1; 498 uint64_t oslsr_el1; /* OS Lock Status */ 499 uint64_t mdcr_el2; 500 uint64_t mdcr_el3; 501 /* Stores the architectural value of the counter *the last time it was 502 * updated* by pmccntr_op_start. Accesses should always be surrounded 503 * by pmccntr_op_start/pmccntr_op_finish to guarantee the latest 504 * architecturally-correct value is being read/set. 505 */ 506 uint64_t c15_ccnt; 507 /* Stores the delta between the architectural value and the underlying 508 * cycle count during normal operation. It is used to update c15_ccnt 509 * to be the correct architectural value before accesses. During 510 * accesses, c15_ccnt_delta contains the underlying count being used 511 * for the access, after which it reverts to the delta value in 512 * pmccntr_op_finish. 513 */ 514 uint64_t c15_ccnt_delta; 515 uint64_t c14_pmevcntr[31]; 516 uint64_t c14_pmevcntr_delta[31]; 517 uint64_t c14_pmevtyper[31]; 518 uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */ 519 uint64_t vpidr_el2; /* Virtualization Processor ID Register */ 520 uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */ 521 uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */ 522 uint64_t gcr_el1; 523 uint64_t rgsr_el1; 524 } cp15; 525 526 struct { 527 /* M profile has up to 4 stack pointers: 528 * a Main Stack Pointer and a Process Stack Pointer for each 529 * of the Secure and Non-Secure states. (If the CPU doesn't support 530 * the security extension then it has only two SPs.) 531 * In QEMU we always store the currently active SP in regs[13], 532 * and the non-active SP for the current security state in 533 * v7m.other_sp. The stack pointers for the inactive security state 534 * are stored in other_ss_msp and other_ss_psp. 535 * switch_v7m_security_state() is responsible for rearranging them 536 * when we change security state. 537 */ 538 uint32_t other_sp; 539 uint32_t other_ss_msp; 540 uint32_t other_ss_psp; 541 uint32_t vecbase[M_REG_NUM_BANKS]; 542 uint32_t basepri[M_REG_NUM_BANKS]; 543 uint32_t control[M_REG_NUM_BANKS]; 544 uint32_t ccr[M_REG_NUM_BANKS]; /* Configuration and Control */ 545 uint32_t cfsr[M_REG_NUM_BANKS]; /* Configurable Fault Status */ 546 uint32_t hfsr; /* HardFault Status */ 547 uint32_t dfsr; /* Debug Fault Status Register */ 548 uint32_t sfsr; /* Secure Fault Status Register */ 549 uint32_t mmfar[M_REG_NUM_BANKS]; /* MemManage Fault Address */ 550 uint32_t bfar; /* BusFault Address */ 551 uint32_t sfar; /* Secure Fault Address Register */ 552 unsigned mpu_ctrl[M_REG_NUM_BANKS]; /* MPU_CTRL */ 553 int exception; 554 uint32_t primask[M_REG_NUM_BANKS]; 555 uint32_t faultmask[M_REG_NUM_BANKS]; 556 uint32_t aircr; /* only holds r/w state if security extn implemented */ 557 uint32_t secure; /* Is CPU in Secure state? (not guest visible) */ 558 uint32_t csselr[M_REG_NUM_BANKS]; 559 uint32_t scr[M_REG_NUM_BANKS]; 560 uint32_t msplim[M_REG_NUM_BANKS]; 561 uint32_t psplim[M_REG_NUM_BANKS]; 562 uint32_t fpcar[M_REG_NUM_BANKS]; 563 uint32_t fpccr[M_REG_NUM_BANKS]; 564 uint32_t fpdscr[M_REG_NUM_BANKS]; 565 uint32_t cpacr[M_REG_NUM_BANKS]; 566 uint32_t nsacr; 567 uint32_t ltpsize; 568 uint32_t vpr; 569 } v7m; 570 571 /* Information associated with an exception about to be taken: 572 * code which raises an exception must set cs->exception_index and 573 * the relevant parts of this structure; the cpu_do_interrupt function 574 * will then set the guest-visible registers as part of the exception 575 * entry process. 576 */ 577 struct { 578 uint32_t syndrome; /* AArch64 format syndrome register */ 579 uint32_t fsr; /* AArch32 format fault status register info */ 580 uint64_t vaddress; /* virtual addr associated with exception, if any */ 581 uint32_t target_el; /* EL the exception should be targeted for */ 582 /* If we implement EL2 we will also need to store information 583 * about the intermediate physical address for stage 2 faults. 584 */ 585 } exception; 586 587 /* Information associated with an SError */ 588 struct { 589 uint8_t pending; 590 uint8_t has_esr; 591 uint64_t esr; 592 } serror; 593 594 uint8_t ext_dabt_raised; /* Tracking/verifying injection of ext DABT */ 595 596 /* State of our input IRQ/FIQ/VIRQ/VFIQ lines */ 597 uint32_t irq_line_state; 598 599 /* Thumb-2 EE state. */ 600 uint32_t teecr; 601 uint32_t teehbr; 602 603 /* VFP coprocessor state. */ 604 struct { 605 ARMVectorReg zregs[32]; 606 607 #ifdef TARGET_AARCH64 608 /* Store FFR as pregs[16] to make it easier to treat as any other. */ 609 #define FFR_PRED_NUM 16 610 ARMPredicateReg pregs[17]; 611 /* Scratch space for aa64 sve predicate temporary. */ 612 ARMPredicateReg preg_tmp; 613 #endif 614 615 /* We store these fpcsr fields separately for convenience. */ 616 uint32_t qc[4] QEMU_ALIGNED(16); 617 int vec_len; 618 int vec_stride; 619 620 uint32_t xregs[16]; 621 622 /* Scratch space for aa32 neon expansion. */ 623 uint32_t scratch[8]; 624 625 /* There are a number of distinct float control structures: 626 * 627 * fp_status: is the "normal" fp status. 628 * fp_status_fp16: used for half-precision calculations 629 * standard_fp_status : the ARM "Standard FPSCR Value" 630 * standard_fp_status_fp16 : used for half-precision 631 * calculations with the ARM "Standard FPSCR Value" 632 * 633 * Half-precision operations are governed by a separate 634 * flush-to-zero control bit in FPSCR:FZ16. We pass a separate 635 * status structure to control this. 636 * 637 * The "Standard FPSCR", ie default-NaN, flush-to-zero, 638 * round-to-nearest and is used by any operations (generally 639 * Neon) which the architecture defines as controlled by the 640 * standard FPSCR value rather than the FPSCR. 641 * 642 * The "standard FPSCR but for fp16 ops" is needed because 643 * the "standard FPSCR" tracks the FPSCR.FZ16 bit rather than 644 * using a fixed value for it. 645 * 646 * To avoid having to transfer exception bits around, we simply 647 * say that the FPSCR cumulative exception flags are the logical 648 * OR of the flags in the four fp statuses. This relies on the 649 * only thing which needs to read the exception flags being 650 * an explicit FPSCR read. 651 */ 652 float_status fp_status; 653 float_status fp_status_f16; 654 float_status standard_fp_status; 655 float_status standard_fp_status_f16; 656 657 /* ZCR_EL[1-3] */ 658 uint64_t zcr_el[4]; 659 } vfp; 660 uint64_t exclusive_addr; 661 uint64_t exclusive_val; 662 uint64_t exclusive_high; 663 664 /* iwMMXt coprocessor state. */ 665 struct { 666 uint64_t regs[16]; 667 uint64_t val; 668 669 uint32_t cregs[16]; 670 } iwmmxt; 671 672 #ifdef TARGET_AARCH64 673 struct { 674 ARMPACKey apia; 675 ARMPACKey apib; 676 ARMPACKey apda; 677 ARMPACKey apdb; 678 ARMPACKey apga; 679 } keys; 680 #endif 681 682 #if defined(CONFIG_USER_ONLY) 683 /* For usermode syscall translation. */ 684 int eabi; 685 #endif 686 687 struct CPUBreakpoint *cpu_breakpoint[16]; 688 struct CPUWatchpoint *cpu_watchpoint[16]; 689 690 /* Fields up to this point are cleared by a CPU reset */ 691 struct {} end_reset_fields; 692 693 /* Fields after this point are preserved across CPU reset. */ 694 695 /* Internal CPU feature flags. */ 696 uint64_t features; 697 698 /* PMSAv7 MPU */ 699 struct { 700 uint32_t *drbar; 701 uint32_t *drsr; 702 uint32_t *dracr; 703 uint32_t rnr[M_REG_NUM_BANKS]; 704 } pmsav7; 705 706 /* PMSAv8 MPU */ 707 struct { 708 /* The PMSAv8 implementation also shares some PMSAv7 config 709 * and state: 710 * pmsav7.rnr (region number register) 711 * pmsav7_dregion (number of configured regions) 712 */ 713 uint32_t *rbar[M_REG_NUM_BANKS]; 714 uint32_t *rlar[M_REG_NUM_BANKS]; 715 uint32_t mair0[M_REG_NUM_BANKS]; 716 uint32_t mair1[M_REG_NUM_BANKS]; 717 } pmsav8; 718 719 /* v8M SAU */ 720 struct { 721 uint32_t *rbar; 722 uint32_t *rlar; 723 uint32_t rnr; 724 uint32_t ctrl; 725 } sau; 726 727 void *nvic; 728 const struct arm_boot_info *boot_info; 729 /* Store GICv3CPUState to access from this struct */ 730 void *gicv3state; 731 732 #ifdef TARGET_TAGGED_ADDRESSES 733 /* Linux syscall tagged address support */ 734 bool tagged_addr_enable; 735 #endif 736 } CPUARMState; 737 738 static inline void set_feature(CPUARMState *env, int feature) 739 { 740 env->features |= 1ULL << feature; 741 } 742 743 static inline void unset_feature(CPUARMState *env, int feature) 744 { 745 env->features &= ~(1ULL << feature); 746 } 747 748 /** 749 * ARMELChangeHookFn: 750 * type of a function which can be registered via arm_register_el_change_hook() 751 * to get callbacks when the CPU changes its exception level or mode. 752 */ 753 typedef void ARMELChangeHookFn(ARMCPU *cpu, void *opaque); 754 typedef struct ARMELChangeHook ARMELChangeHook; 755 struct ARMELChangeHook { 756 ARMELChangeHookFn *hook; 757 void *opaque; 758 QLIST_ENTRY(ARMELChangeHook) node; 759 }; 760 761 /* These values map onto the return values for 762 * QEMU_PSCI_0_2_FN_AFFINITY_INFO */ 763 typedef enum ARMPSCIState { 764 PSCI_ON = 0, 765 PSCI_OFF = 1, 766 PSCI_ON_PENDING = 2 767 } ARMPSCIState; 768 769 typedef struct ARMISARegisters ARMISARegisters; 770 771 /** 772 * ARMCPU: 773 * @env: #CPUARMState 774 * 775 * An ARM CPU core. 776 */ 777 struct ARMCPU { 778 /*< private >*/ 779 CPUState parent_obj; 780 /*< public >*/ 781 782 CPUNegativeOffsetState neg; 783 CPUARMState env; 784 785 /* Coprocessor information */ 786 GHashTable *cp_regs; 787 /* For marshalling (mostly coprocessor) register state between the 788 * kernel and QEMU (for KVM) and between two QEMUs (for migration), 789 * we use these arrays. 790 */ 791 /* List of register indexes managed via these arrays; (full KVM style 792 * 64 bit indexes, not CPRegInfo 32 bit indexes) 793 */ 794 uint64_t *cpreg_indexes; 795 /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */ 796 uint64_t *cpreg_values; 797 /* Length of the indexes, values, reset_values arrays */ 798 int32_t cpreg_array_len; 799 /* These are used only for migration: incoming data arrives in 800 * these fields and is sanity checked in post_load before copying 801 * to the working data structures above. 802 */ 803 uint64_t *cpreg_vmstate_indexes; 804 uint64_t *cpreg_vmstate_values; 805 int32_t cpreg_vmstate_array_len; 806 807 DynamicGDBXMLInfo dyn_sysreg_xml; 808 DynamicGDBXMLInfo dyn_svereg_xml; 809 810 /* Timers used by the generic (architected) timer */ 811 QEMUTimer *gt_timer[NUM_GTIMERS]; 812 /* 813 * Timer used by the PMU. Its state is restored after migration by 814 * pmu_op_finish() - it does not need other handling during migration 815 */ 816 QEMUTimer *pmu_timer; 817 /* GPIO outputs for generic timer */ 818 qemu_irq gt_timer_outputs[NUM_GTIMERS]; 819 /* GPIO output for GICv3 maintenance interrupt signal */ 820 qemu_irq gicv3_maintenance_interrupt; 821 /* GPIO output for the PMU interrupt */ 822 qemu_irq pmu_interrupt; 823 824 /* MemoryRegion to use for secure physical accesses */ 825 MemoryRegion *secure_memory; 826 827 /* MemoryRegion to use for allocation tag accesses */ 828 MemoryRegion *tag_memory; 829 MemoryRegion *secure_tag_memory; 830 831 /* For v8M, pointer to the IDAU interface provided by board/SoC */ 832 Object *idau; 833 834 /* 'compatible' string for this CPU for Linux device trees */ 835 const char *dtb_compatible; 836 837 /* PSCI version for this CPU 838 * Bits[31:16] = Major Version 839 * Bits[15:0] = Minor Version 840 */ 841 uint32_t psci_version; 842 843 /* Current power state, access guarded by BQL */ 844 ARMPSCIState power_state; 845 846 /* CPU has virtualization extension */ 847 bool has_el2; 848 /* CPU has security extension */ 849 bool has_el3; 850 /* CPU has PMU (Performance Monitor Unit) */ 851 bool has_pmu; 852 /* CPU has VFP */ 853 bool has_vfp; 854 /* CPU has Neon */ 855 bool has_neon; 856 /* CPU has M-profile DSP extension */ 857 bool has_dsp; 858 859 /* CPU has memory protection unit */ 860 bool has_mpu; 861 /* PMSAv7 MPU number of supported regions */ 862 uint32_t pmsav7_dregion; 863 /* v8M SAU number of supported regions */ 864 uint32_t sau_sregion; 865 866 /* PSCI conduit used to invoke PSCI methods 867 * 0 - disabled, 1 - smc, 2 - hvc 868 */ 869 uint32_t psci_conduit; 870 871 /* For v8M, initial value of the Secure VTOR */ 872 uint32_t init_svtor; 873 /* For v8M, initial value of the Non-secure VTOR */ 874 uint32_t init_nsvtor; 875 876 /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or 877 * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. 878 */ 879 uint32_t kvm_target; 880 881 /* KVM init features for this CPU */ 882 uint32_t kvm_init_features[7]; 883 884 /* KVM CPU state */ 885 886 /* KVM virtual time adjustment */ 887 bool kvm_adjvtime; 888 bool kvm_vtime_dirty; 889 uint64_t kvm_vtime; 890 891 /* KVM steal time */ 892 OnOffAuto kvm_steal_time; 893 894 /* Uniprocessor system with MP extensions */ 895 bool mp_is_up; 896 897 /* True if we tried kvm_arm_host_cpu_features() during CPU instance_init 898 * and the probe failed (so we need to report the error in realize) 899 */ 900 bool host_cpu_probe_failed; 901 902 /* Specify the number of cores in this CPU cluster. Used for the L2CTLR 903 * register. 904 */ 905 int32_t core_count; 906 907 /* The instance init functions for implementation-specific subclasses 908 * set these fields to specify the implementation-dependent values of 909 * various constant registers and reset values of non-constant 910 * registers. 911 * Some of these might become QOM properties eventually. 912 * Field names match the official register names as defined in the 913 * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix 914 * is used for reset values of non-constant registers; no reset_ 915 * prefix means a constant register. 916 * Some of these registers are split out into a substructure that 917 * is shared with the translators to control the ISA. 918 * 919 * Note that if you add an ID register to the ARMISARegisters struct 920 * you need to also update the 32-bit and 64-bit versions of the 921 * kvm_arm_get_host_cpu_features() function to correctly populate the 922 * field by reading the value from the KVM vCPU. 923 */ 924 struct ARMISARegisters { 925 uint32_t id_isar0; 926 uint32_t id_isar1; 927 uint32_t id_isar2; 928 uint32_t id_isar3; 929 uint32_t id_isar4; 930 uint32_t id_isar5; 931 uint32_t id_isar6; 932 uint32_t id_mmfr0; 933 uint32_t id_mmfr1; 934 uint32_t id_mmfr2; 935 uint32_t id_mmfr3; 936 uint32_t id_mmfr4; 937 uint32_t id_pfr0; 938 uint32_t id_pfr1; 939 uint32_t id_pfr2; 940 uint32_t mvfr0; 941 uint32_t mvfr1; 942 uint32_t mvfr2; 943 uint32_t id_dfr0; 944 uint32_t dbgdidr; 945 uint64_t id_aa64isar0; 946 uint64_t id_aa64isar1; 947 uint64_t id_aa64pfr0; 948 uint64_t id_aa64pfr1; 949 uint64_t id_aa64mmfr0; 950 uint64_t id_aa64mmfr1; 951 uint64_t id_aa64mmfr2; 952 uint64_t id_aa64dfr0; 953 uint64_t id_aa64dfr1; 954 uint64_t id_aa64zfr0; 955 } isar; 956 uint64_t midr; 957 uint32_t revidr; 958 uint32_t reset_fpsid; 959 uint64_t ctr; 960 uint32_t reset_sctlr; 961 uint64_t pmceid0; 962 uint64_t pmceid1; 963 uint32_t id_afr0; 964 uint64_t id_aa64afr0; 965 uint64_t id_aa64afr1; 966 uint64_t clidr; 967 uint64_t mp_affinity; /* MP ID without feature bits */ 968 /* The elements of this array are the CCSIDR values for each cache, 969 * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc. 970 */ 971 uint64_t ccsidr[16]; 972 uint64_t reset_cbar; 973 uint32_t reset_auxcr; 974 bool reset_hivecs; 975 976 /* 977 * Intermediate values used during property parsing. 978 * Once finalized, the values should be read from ID_AA64ISAR1. 979 */ 980 bool prop_pauth; 981 bool prop_pauth_impdef; 982 983 /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ 984 uint32_t dcz_blocksize; 985 uint64_t rvbar; 986 987 /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ 988 int gic_num_lrs; /* number of list registers */ 989 int gic_vpribits; /* number of virtual priority bits */ 990 int gic_vprebits; /* number of virtual preemption bits */ 991 992 /* Whether the cfgend input is high (i.e. this CPU should reset into 993 * big-endian mode). This setting isn't used directly: instead it modifies 994 * the reset_sctlr value to have SCTLR_B or SCTLR_EE set, depending on the 995 * architecture version. 996 */ 997 bool cfgend; 998 999 QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; 1000 QLIST_HEAD(, ARMELChangeHook) el_change_hooks; 1001 1002 int32_t node_id; /* NUMA node this CPU belongs to */ 1003 1004 /* Used to synchronize KVM and QEMU in-kernel device levels */ 1005 uint8_t device_irq_level; 1006 1007 /* Used to set the maximum vector length the cpu will support. */ 1008 uint32_t sve_max_vq; 1009 1010 #ifdef CONFIG_USER_ONLY 1011 /* Used to set the default vector length at process start. */ 1012 uint32_t sve_default_vq; 1013 #endif 1014 1015 /* 1016 * In sve_vq_map each set bit is a supported vector length of 1017 * (bit-number + 1) * 16 bytes, i.e. each bit number + 1 is the vector 1018 * length in quadwords. 1019 * 1020 * While processing properties during initialization, corresponding 1021 * sve_vq_init bits are set for bits in sve_vq_map that have been 1022 * set by properties. 1023 * 1024 * Bits set in sve_vq_supported represent valid vector lengths for 1025 * the CPU type. 1026 */ 1027 DECLARE_BITMAP(sve_vq_map, ARM_MAX_VQ); 1028 DECLARE_BITMAP(sve_vq_init, ARM_MAX_VQ); 1029 DECLARE_BITMAP(sve_vq_supported, ARM_MAX_VQ); 1030 1031 /* Generic timer counter frequency, in Hz */ 1032 uint64_t gt_cntfrq_hz; 1033 }; 1034 1035 unsigned int gt_cntfrq_period_ns(ARMCPU *cpu); 1036 1037 void arm_cpu_post_init(Object *obj); 1038 1039 uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz); 1040 1041 #ifndef CONFIG_USER_ONLY 1042 extern const VMStateDescription vmstate_arm_cpu; 1043 #endif 1044 1045 void arm_cpu_do_interrupt(CPUState *cpu); 1046 void arm_v7m_cpu_do_interrupt(CPUState *cpu); 1047 bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req); 1048 1049 hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr, 1050 MemTxAttrs *attrs); 1051 1052 int arm_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); 1053 int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); 1054 1055 /* 1056 * Helpers to dynamically generates XML descriptions of the sysregs 1057 * and SVE registers. Returns the number of registers in each set. 1058 */ 1059 int arm_gen_dynamic_sysreg_xml(CPUState *cpu, int base_reg); 1060 int arm_gen_dynamic_svereg_xml(CPUState *cpu, int base_reg); 1061 1062 /* Returns the dynamically generated XML for the gdb stub. 1063 * Returns a pointer to the XML contents for the specified XML file or NULL 1064 * if the XML name doesn't match the predefined one. 1065 */ 1066 const char *arm_gdb_get_dynamic_xml(CPUState *cpu, const char *xmlname); 1067 1068 int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs, 1069 int cpuid, void *opaque); 1070 int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs, 1071 int cpuid, void *opaque); 1072 1073 #ifdef TARGET_AARCH64 1074 int aarch64_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); 1075 int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); 1076 void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq); 1077 void aarch64_sve_change_el(CPUARMState *env, int old_el, 1078 int new_el, bool el0_a64); 1079 void aarch64_add_sve_properties(Object *obj); 1080 1081 /* 1082 * SVE registers are encoded in KVM's memory in an endianness-invariant format. 1083 * The byte at offset i from the start of the in-memory representation contains 1084 * the bits [(7 + 8 * i) : (8 * i)] of the register value. As this means the 1085 * lowest offsets are stored in the lowest memory addresses, then that nearly 1086 * matches QEMU's representation, which is to use an array of host-endian 1087 * uint64_t's, where the lower offsets are at the lower indices. To complete 1088 * the translation we just need to byte swap the uint64_t's on big-endian hosts. 1089 */ 1090 static inline uint64_t *sve_bswap64(uint64_t *dst, uint64_t *src, int nr) 1091 { 1092 #ifdef HOST_WORDS_BIGENDIAN 1093 int i; 1094 1095 for (i = 0; i < nr; ++i) { 1096 dst[i] = bswap64(src[i]); 1097 } 1098 1099 return dst; 1100 #else 1101 return src; 1102 #endif 1103 } 1104 1105 #else 1106 static inline void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) { } 1107 static inline void aarch64_sve_change_el(CPUARMState *env, int o, 1108 int n, bool a) 1109 { } 1110 static inline void aarch64_add_sve_properties(Object *obj) { } 1111 #endif 1112 1113 void aarch64_sync_32_to_64(CPUARMState *env); 1114 void aarch64_sync_64_to_32(CPUARMState *env); 1115 1116 int fp_exception_el(CPUARMState *env, int cur_el); 1117 int sve_exception_el(CPUARMState *env, int cur_el); 1118 uint32_t sve_zcr_len_for_el(CPUARMState *env, int el); 1119 1120 static inline bool is_a64(CPUARMState *env) 1121 { 1122 return env->aarch64; 1123 } 1124 1125 /* you can call this signal handler from your SIGBUS and SIGSEGV 1126 signal handlers to inform the virtual CPU of exceptions. non zero 1127 is returned if the signal was handled by the virtual CPU. */ 1128 int cpu_arm_signal_handler(int host_signum, void *pinfo, 1129 void *puc); 1130 1131 /** 1132 * pmu_op_start/finish 1133 * @env: CPUARMState 1134 * 1135 * Convert all PMU counters between their delta form (the typical mode when 1136 * they are enabled) and the guest-visible values. These two calls must 1137 * surround any action which might affect the counters. 1138 */ 1139 void pmu_op_start(CPUARMState *env); 1140 void pmu_op_finish(CPUARMState *env); 1141 1142 /* 1143 * Called when a PMU counter is due to overflow 1144 */ 1145 void arm_pmu_timer_cb(void *opaque); 1146 1147 /** 1148 * Functions to register as EL change hooks for PMU mode filtering 1149 */ 1150 void pmu_pre_el_change(ARMCPU *cpu, void *ignored); 1151 void pmu_post_el_change(ARMCPU *cpu, void *ignored); 1152 1153 /* 1154 * pmu_init 1155 * @cpu: ARMCPU 1156 * 1157 * Initialize the CPU's PMCEID[01]_EL0 registers and associated internal state 1158 * for the current configuration 1159 */ 1160 void pmu_init(ARMCPU *cpu); 1161 1162 /* SCTLR bit meanings. Several bits have been reused in newer 1163 * versions of the architecture; in that case we define constants 1164 * for both old and new bit meanings. Code which tests against those 1165 * bits should probably check or otherwise arrange that the CPU 1166 * is the architectural version it expects. 1167 */ 1168 #define SCTLR_M (1U << 0) 1169 #define SCTLR_A (1U << 1) 1170 #define SCTLR_C (1U << 2) 1171 #define SCTLR_W (1U << 3) /* up to v6; RAO in v7 */ 1172 #define SCTLR_nTLSMD_32 (1U << 3) /* v8.2-LSMAOC, AArch32 only */ 1173 #define SCTLR_SA (1U << 3) /* AArch64 only */ 1174 #define SCTLR_P (1U << 4) /* up to v5; RAO in v6 and v7 */ 1175 #define SCTLR_LSMAOE_32 (1U << 4) /* v8.2-LSMAOC, AArch32 only */ 1176 #define SCTLR_SA0 (1U << 4) /* v8 onward, AArch64 only */ 1177 #define SCTLR_D (1U << 5) /* up to v5; RAO in v6 */ 1178 #define SCTLR_CP15BEN (1U << 5) /* v7 onward */ 1179 #define SCTLR_L (1U << 6) /* up to v5; RAO in v6 and v7; RAZ in v8 */ 1180 #define SCTLR_nAA (1U << 6) /* when v8.4-LSE is implemented */ 1181 #define SCTLR_B (1U << 7) /* up to v6; RAZ in v7 */ 1182 #define SCTLR_ITD (1U << 7) /* v8 onward */ 1183 #define SCTLR_S (1U << 8) /* up to v6; RAZ in v7 */ 1184 #define SCTLR_SED (1U << 8) /* v8 onward */ 1185 #define SCTLR_R (1U << 9) /* up to v6; RAZ in v7 */ 1186 #define SCTLR_UMA (1U << 9) /* v8 onward, AArch64 only */ 1187 #define SCTLR_F (1U << 10) /* up to v6 */ 1188 #define SCTLR_SW (1U << 10) /* v7 */ 1189 #define SCTLR_EnRCTX (1U << 10) /* in v8.0-PredInv */ 1190 #define SCTLR_Z (1U << 11) /* in v7, RES1 in v8 */ 1191 #define SCTLR_EOS (1U << 11) /* v8.5-ExS */ 1192 #define SCTLR_I (1U << 12) 1193 #define SCTLR_V (1U << 13) /* AArch32 only */ 1194 #define SCTLR_EnDB (1U << 13) /* v8.3, AArch64 only */ 1195 #define SCTLR_RR (1U << 14) /* up to v7 */ 1196 #define SCTLR_DZE (1U << 14) /* v8 onward, AArch64 only */ 1197 #define SCTLR_L4 (1U << 15) /* up to v6; RAZ in v7 */ 1198 #define SCTLR_UCT (1U << 15) /* v8 onward, AArch64 only */ 1199 #define SCTLR_DT (1U << 16) /* up to ??, RAO in v6 and v7 */ 1200 #define SCTLR_nTWI (1U << 16) /* v8 onward */ 1201 #define SCTLR_HA (1U << 17) /* up to v7, RES0 in v8 */ 1202 #define SCTLR_BR (1U << 17) /* PMSA only */ 1203 #define SCTLR_IT (1U << 18) /* up to ??, RAO in v6 and v7 */ 1204 #define SCTLR_nTWE (1U << 18) /* v8 onward */ 1205 #define SCTLR_WXN (1U << 19) 1206 #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ 1207 #define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */ 1208 #define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */ 1209 #define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */ 1210 #define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */ 1211 #define SCTLR_EIS (1U << 22) /* v8.5-ExS */ 1212 #define SCTLR_XP (1U << 23) /* up to v6; v7 onward RAO */ 1213 #define SCTLR_SPAN (1U << 23) /* v8.1-PAN */ 1214 #define SCTLR_VE (1U << 24) /* up to v7 */ 1215 #define SCTLR_E0E (1U << 24) /* v8 onward, AArch64 only */ 1216 #define SCTLR_EE (1U << 25) 1217 #define SCTLR_L2 (1U << 26) /* up to v6, RAZ in v7 */ 1218 #define SCTLR_UCI (1U << 26) /* v8 onward, AArch64 only */ 1219 #define SCTLR_NMFI (1U << 27) /* up to v7, RAZ in v7VE and v8 */ 1220 #define SCTLR_EnDA (1U << 27) /* v8.3, AArch64 only */ 1221 #define SCTLR_TRE (1U << 28) /* AArch32 only */ 1222 #define SCTLR_nTLSMD_64 (1U << 28) /* v8.2-LSMAOC, AArch64 only */ 1223 #define SCTLR_AFE (1U << 29) /* AArch32 only */ 1224 #define SCTLR_LSMAOE_64 (1U << 29) /* v8.2-LSMAOC, AArch64 only */ 1225 #define SCTLR_TE (1U << 30) /* AArch32 only */ 1226 #define SCTLR_EnIB (1U << 30) /* v8.3, AArch64 only */ 1227 #define SCTLR_EnIA (1U << 31) /* v8.3, AArch64 only */ 1228 #define SCTLR_DSSBS_32 (1U << 31) /* v8.5, AArch32 only */ 1229 #define SCTLR_BT0 (1ULL << 35) /* v8.5-BTI */ 1230 #define SCTLR_BT1 (1ULL << 36) /* v8.5-BTI */ 1231 #define SCTLR_ITFSB (1ULL << 37) /* v8.5-MemTag */ 1232 #define SCTLR_TCF0 (3ULL << 38) /* v8.5-MemTag */ 1233 #define SCTLR_TCF (3ULL << 40) /* v8.5-MemTag */ 1234 #define SCTLR_ATA0 (1ULL << 42) /* v8.5-MemTag */ 1235 #define SCTLR_ATA (1ULL << 43) /* v8.5-MemTag */ 1236 #define SCTLR_DSSBS_64 (1ULL << 44) /* v8.5, AArch64 only */ 1237 1238 #define CPTR_TCPAC (1U << 31) 1239 #define CPTR_TTA (1U << 20) 1240 #define CPTR_TFP (1U << 10) 1241 #define CPTR_TZ (1U << 8) /* CPTR_EL2 */ 1242 #define CPTR_EZ (1U << 8) /* CPTR_EL3 */ 1243 1244 #define MDCR_EPMAD (1U << 21) 1245 #define MDCR_EDAD (1U << 20) 1246 #define MDCR_SPME (1U << 17) /* MDCR_EL3 */ 1247 #define MDCR_HPMD (1U << 17) /* MDCR_EL2 */ 1248 #define MDCR_SDD (1U << 16) 1249 #define MDCR_SPD (3U << 14) 1250 #define MDCR_TDRA (1U << 11) 1251 #define MDCR_TDOSA (1U << 10) 1252 #define MDCR_TDA (1U << 9) 1253 #define MDCR_TDE (1U << 8) 1254 #define MDCR_HPME (1U << 7) 1255 #define MDCR_TPM (1U << 6) 1256 #define MDCR_TPMCR (1U << 5) 1257 #define MDCR_HPMN (0x1fU) 1258 1259 /* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */ 1260 #define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD) 1261 1262 #define CPSR_M (0x1fU) 1263 #define CPSR_T (1U << 5) 1264 #define CPSR_F (1U << 6) 1265 #define CPSR_I (1U << 7) 1266 #define CPSR_A (1U << 8) 1267 #define CPSR_E (1U << 9) 1268 #define CPSR_IT_2_7 (0xfc00U) 1269 #define CPSR_GE (0xfU << 16) 1270 #define CPSR_IL (1U << 20) 1271 #define CPSR_DIT (1U << 21) 1272 #define CPSR_PAN (1U << 22) 1273 #define CPSR_SSBS (1U << 23) 1274 #define CPSR_J (1U << 24) 1275 #define CPSR_IT_0_1 (3U << 25) 1276 #define CPSR_Q (1U << 27) 1277 #define CPSR_V (1U << 28) 1278 #define CPSR_C (1U << 29) 1279 #define CPSR_Z (1U << 30) 1280 #define CPSR_N (1U << 31) 1281 #define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V) 1282 #define CPSR_AIF (CPSR_A | CPSR_I | CPSR_F) 1283 1284 #define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7) 1285 #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ 1286 | CPSR_NZCV) 1287 /* Bits writable in user mode. */ 1288 #define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE | CPSR_E) 1289 /* Execution state bits. MRS read as zero, MSR writes ignored. */ 1290 #define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J | CPSR_IL) 1291 1292 /* Bit definitions for M profile XPSR. Most are the same as CPSR. */ 1293 #define XPSR_EXCP 0x1ffU 1294 #define XPSR_SPREALIGN (1U << 9) /* Only set in exception stack frames */ 1295 #define XPSR_IT_2_7 CPSR_IT_2_7 1296 #define XPSR_GE CPSR_GE 1297 #define XPSR_SFPA (1U << 20) /* Only set in exception stack frames */ 1298 #define XPSR_T (1U << 24) /* Not the same as CPSR_T ! */ 1299 #define XPSR_IT_0_1 CPSR_IT_0_1 1300 #define XPSR_Q CPSR_Q 1301 #define XPSR_V CPSR_V 1302 #define XPSR_C CPSR_C 1303 #define XPSR_Z CPSR_Z 1304 #define XPSR_N CPSR_N 1305 #define XPSR_NZCV CPSR_NZCV 1306 #define XPSR_IT CPSR_IT 1307 1308 #define TTBCR_N (7U << 0) /* TTBCR.EAE==0 */ 1309 #define TTBCR_T0SZ (7U << 0) /* TTBCR.EAE==1 */ 1310 #define TTBCR_PD0 (1U << 4) 1311 #define TTBCR_PD1 (1U << 5) 1312 #define TTBCR_EPD0 (1U << 7) 1313 #define TTBCR_IRGN0 (3U << 8) 1314 #define TTBCR_ORGN0 (3U << 10) 1315 #define TTBCR_SH0 (3U << 12) 1316 #define TTBCR_T1SZ (3U << 16) 1317 #define TTBCR_A1 (1U << 22) 1318 #define TTBCR_EPD1 (1U << 23) 1319 #define TTBCR_IRGN1 (3U << 24) 1320 #define TTBCR_ORGN1 (3U << 26) 1321 #define TTBCR_SH1 (1U << 28) 1322 #define TTBCR_EAE (1U << 31) 1323 1324 /* Bit definitions for ARMv8 SPSR (PSTATE) format. 1325 * Only these are valid when in AArch64 mode; in 1326 * AArch32 mode SPSRs are basically CPSR-format. 1327 */ 1328 #define PSTATE_SP (1U) 1329 #define PSTATE_M (0xFU) 1330 #define PSTATE_nRW (1U << 4) 1331 #define PSTATE_F (1U << 6) 1332 #define PSTATE_I (1U << 7) 1333 #define PSTATE_A (1U << 8) 1334 #define PSTATE_D (1U << 9) 1335 #define PSTATE_BTYPE (3U << 10) 1336 #define PSTATE_SSBS (1U << 12) 1337 #define PSTATE_IL (1U << 20) 1338 #define PSTATE_SS (1U << 21) 1339 #define PSTATE_PAN (1U << 22) 1340 #define PSTATE_UAO (1U << 23) 1341 #define PSTATE_DIT (1U << 24) 1342 #define PSTATE_TCO (1U << 25) 1343 #define PSTATE_V (1U << 28) 1344 #define PSTATE_C (1U << 29) 1345 #define PSTATE_Z (1U << 30) 1346 #define PSTATE_N (1U << 31) 1347 #define PSTATE_NZCV (PSTATE_N | PSTATE_Z | PSTATE_C | PSTATE_V) 1348 #define PSTATE_DAIF (PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F) 1349 #define CACHED_PSTATE_BITS (PSTATE_NZCV | PSTATE_DAIF | PSTATE_BTYPE) 1350 /* Mode values for AArch64 */ 1351 #define PSTATE_MODE_EL3h 13 1352 #define PSTATE_MODE_EL3t 12 1353 #define PSTATE_MODE_EL2h 9 1354 #define PSTATE_MODE_EL2t 8 1355 #define PSTATE_MODE_EL1h 5 1356 #define PSTATE_MODE_EL1t 4 1357 #define PSTATE_MODE_EL0t 0 1358 1359 /* Write a new value to v7m.exception, thus transitioning into or out 1360 * of Handler mode; this may result in a change of active stack pointer. 1361 */ 1362 void write_v7m_exception(CPUARMState *env, uint32_t new_exc); 1363 1364 /* Map EL and handler into a PSTATE_MODE. */ 1365 static inline unsigned int aarch64_pstate_mode(unsigned int el, bool handler) 1366 { 1367 return (el << 2) | handler; 1368 } 1369 1370 /* Return the current PSTATE value. For the moment we don't support 32<->64 bit 1371 * interprocessing, so we don't attempt to sync with the cpsr state used by 1372 * the 32 bit decoder. 1373 */ 1374 static inline uint32_t pstate_read(CPUARMState *env) 1375 { 1376 int ZF; 1377 1378 ZF = (env->ZF == 0); 1379 return (env->NF & 0x80000000) | (ZF << 30) 1380 | (env->CF << 29) | ((env->VF & 0x80000000) >> 3) 1381 | env->pstate | env->daif | (env->btype << 10); 1382 } 1383 1384 static inline void pstate_write(CPUARMState *env, uint32_t val) 1385 { 1386 env->ZF = (~val) & PSTATE_Z; 1387 env->NF = val; 1388 env->CF = (val >> 29) & 1; 1389 env->VF = (val << 3) & 0x80000000; 1390 env->daif = val & PSTATE_DAIF; 1391 env->btype = (val >> 10) & 3; 1392 env->pstate = val & ~CACHED_PSTATE_BITS; 1393 } 1394 1395 /* Return the current CPSR value. */ 1396 uint32_t cpsr_read(CPUARMState *env); 1397 1398 typedef enum CPSRWriteType { 1399 CPSRWriteByInstr = 0, /* from guest MSR or CPS */ 1400 CPSRWriteExceptionReturn = 1, /* from guest exception return insn */ 1401 CPSRWriteRaw = 2, 1402 /* trust values, no reg bank switch, no hflags rebuild */ 1403 CPSRWriteByGDBStub = 3, /* from the GDB stub */ 1404 } CPSRWriteType; 1405 1406 /* 1407 * Set the CPSR. Note that some bits of mask must be all-set or all-clear. 1408 * This will do an arm_rebuild_hflags() if any of the bits in @mask 1409 * correspond to TB flags bits cached in the hflags, unless @write_type 1410 * is CPSRWriteRaw. 1411 */ 1412 void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, 1413 CPSRWriteType write_type); 1414 1415 /* Return the current xPSR value. */ 1416 static inline uint32_t xpsr_read(CPUARMState *env) 1417 { 1418 int ZF; 1419 ZF = (env->ZF == 0); 1420 return (env->NF & 0x80000000) | (ZF << 30) 1421 | (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27) 1422 | (env->thumb << 24) | ((env->condexec_bits & 3) << 25) 1423 | ((env->condexec_bits & 0xfc) << 8) 1424 | (env->GE << 16) 1425 | env->v7m.exception; 1426 } 1427 1428 /* Set the xPSR. Note that some bits of mask must be all-set or all-clear. */ 1429 static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) 1430 { 1431 if (mask & XPSR_NZCV) { 1432 env->ZF = (~val) & XPSR_Z; 1433 env->NF = val; 1434 env->CF = (val >> 29) & 1; 1435 env->VF = (val << 3) & 0x80000000; 1436 } 1437 if (mask & XPSR_Q) { 1438 env->QF = ((val & XPSR_Q) != 0); 1439 } 1440 if (mask & XPSR_GE) { 1441 env->GE = (val & XPSR_GE) >> 16; 1442 } 1443 #ifndef CONFIG_USER_ONLY 1444 if (mask & XPSR_T) { 1445 env->thumb = ((val & XPSR_T) != 0); 1446 } 1447 if (mask & XPSR_IT_0_1) { 1448 env->condexec_bits &= ~3; 1449 env->condexec_bits |= (val >> 25) & 3; 1450 } 1451 if (mask & XPSR_IT_2_7) { 1452 env->condexec_bits &= 3; 1453 env->condexec_bits |= (val >> 8) & 0xfc; 1454 } 1455 if (mask & XPSR_EXCP) { 1456 /* Note that this only happens on exception exit */ 1457 write_v7m_exception(env, val & XPSR_EXCP); 1458 } 1459 #endif 1460 } 1461 1462 #define HCR_VM (1ULL << 0) 1463 #define HCR_SWIO (1ULL << 1) 1464 #define HCR_PTW (1ULL << 2) 1465 #define HCR_FMO (1ULL << 3) 1466 #define HCR_IMO (1ULL << 4) 1467 #define HCR_AMO (1ULL << 5) 1468 #define HCR_VF (1ULL << 6) 1469 #define HCR_VI (1ULL << 7) 1470 #define HCR_VSE (1ULL << 8) 1471 #define HCR_FB (1ULL << 9) 1472 #define HCR_BSU_MASK (3ULL << 10) 1473 #define HCR_DC (1ULL << 12) 1474 #define HCR_TWI (1ULL << 13) 1475 #define HCR_TWE (1ULL << 14) 1476 #define HCR_TID0 (1ULL << 15) 1477 #define HCR_TID1 (1ULL << 16) 1478 #define HCR_TID2 (1ULL << 17) 1479 #define HCR_TID3 (1ULL << 18) 1480 #define HCR_TSC (1ULL << 19) 1481 #define HCR_TIDCP (1ULL << 20) 1482 #define HCR_TACR (1ULL << 21) 1483 #define HCR_TSW (1ULL << 22) 1484 #define HCR_TPCP (1ULL << 23) 1485 #define HCR_TPU (1ULL << 24) 1486 #define HCR_TTLB (1ULL << 25) 1487 #define HCR_TVM (1ULL << 26) 1488 #define HCR_TGE (1ULL << 27) 1489 #define HCR_TDZ (1ULL << 28) 1490 #define HCR_HCD (1ULL << 29) 1491 #define HCR_TRVM (1ULL << 30) 1492 #define HCR_RW (1ULL << 31) 1493 #define HCR_CD (1ULL << 32) 1494 #define HCR_ID (1ULL << 33) 1495 #define HCR_E2H (1ULL << 34) 1496 #define HCR_TLOR (1ULL << 35) 1497 #define HCR_TERR (1ULL << 36) 1498 #define HCR_TEA (1ULL << 37) 1499 #define HCR_MIOCNCE (1ULL << 38) 1500 /* RES0 bit 39 */ 1501 #define HCR_APK (1ULL << 40) 1502 #define HCR_API (1ULL << 41) 1503 #define HCR_NV (1ULL << 42) 1504 #define HCR_NV1 (1ULL << 43) 1505 #define HCR_AT (1ULL << 44) 1506 #define HCR_NV2 (1ULL << 45) 1507 #define HCR_FWB (1ULL << 46) 1508 #define HCR_FIEN (1ULL << 47) 1509 /* RES0 bit 48 */ 1510 #define HCR_TID4 (1ULL << 49) 1511 #define HCR_TICAB (1ULL << 50) 1512 #define HCR_AMVOFFEN (1ULL << 51) 1513 #define HCR_TOCU (1ULL << 52) 1514 #define HCR_ENSCXT (1ULL << 53) 1515 #define HCR_TTLBIS (1ULL << 54) 1516 #define HCR_TTLBOS (1ULL << 55) 1517 #define HCR_ATA (1ULL << 56) 1518 #define HCR_DCT (1ULL << 57) 1519 #define HCR_TID5 (1ULL << 58) 1520 #define HCR_TWEDEN (1ULL << 59) 1521 #define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) 1522 1523 #define HPFAR_NS (1ULL << 63) 1524 1525 #define SCR_NS (1U << 0) 1526 #define SCR_IRQ (1U << 1) 1527 #define SCR_FIQ (1U << 2) 1528 #define SCR_EA (1U << 3) 1529 #define SCR_FW (1U << 4) 1530 #define SCR_AW (1U << 5) 1531 #define SCR_NET (1U << 6) 1532 #define SCR_SMD (1U << 7) 1533 #define SCR_HCE (1U << 8) 1534 #define SCR_SIF (1U << 9) 1535 #define SCR_RW (1U << 10) 1536 #define SCR_ST (1U << 11) 1537 #define SCR_TWI (1U << 12) 1538 #define SCR_TWE (1U << 13) 1539 #define SCR_TLOR (1U << 14) 1540 #define SCR_TERR (1U << 15) 1541 #define SCR_APK (1U << 16) 1542 #define SCR_API (1U << 17) 1543 #define SCR_EEL2 (1U << 18) 1544 #define SCR_EASE (1U << 19) 1545 #define SCR_NMEA (1U << 20) 1546 #define SCR_FIEN (1U << 21) 1547 #define SCR_ENSCXT (1U << 25) 1548 #define SCR_ATA (1U << 26) 1549 1550 #define HSTR_TTEE (1 << 16) 1551 #define HSTR_TJDBX (1 << 17) 1552 1553 /* Return the current FPSCR value. */ 1554 uint32_t vfp_get_fpscr(CPUARMState *env); 1555 void vfp_set_fpscr(CPUARMState *env, uint32_t val); 1556 1557 /* FPCR, Floating Point Control Register 1558 * FPSR, Floating Poiht Status Register 1559 * 1560 * For A64 the FPSCR is split into two logically distinct registers, 1561 * FPCR and FPSR. However since they still use non-overlapping bits 1562 * we store the underlying state in fpscr and just mask on read/write. 1563 */ 1564 #define FPSR_MASK 0xf800009f 1565 #define FPCR_MASK 0x07ff9f00 1566 1567 #define FPCR_IOE (1 << 8) /* Invalid Operation exception trap enable */ 1568 #define FPCR_DZE (1 << 9) /* Divide by Zero exception trap enable */ 1569 #define FPCR_OFE (1 << 10) /* Overflow exception trap enable */ 1570 #define FPCR_UFE (1 << 11) /* Underflow exception trap enable */ 1571 #define FPCR_IXE (1 << 12) /* Inexact exception trap enable */ 1572 #define FPCR_IDE (1 << 15) /* Input Denormal exception trap enable */ 1573 #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ 1574 #define FPCR_RMODE_MASK (3 << 22) /* Rounding mode */ 1575 #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ 1576 #define FPCR_DN (1 << 25) /* Default NaN enable bit */ 1577 #define FPCR_AHP (1 << 26) /* Alternative half-precision */ 1578 #define FPCR_QC (1 << 27) /* Cumulative saturation bit */ 1579 #define FPCR_V (1 << 28) /* FP overflow flag */ 1580 #define FPCR_C (1 << 29) /* FP carry flag */ 1581 #define FPCR_Z (1 << 30) /* FP zero flag */ 1582 #define FPCR_N (1 << 31) /* FP negative flag */ 1583 1584 #define FPCR_LTPSIZE_SHIFT 16 /* LTPSIZE, M-profile only */ 1585 #define FPCR_LTPSIZE_MASK (7 << FPCR_LTPSIZE_SHIFT) 1586 #define FPCR_LTPSIZE_LENGTH 3 1587 1588 #define FPCR_NZCV_MASK (FPCR_N | FPCR_Z | FPCR_C | FPCR_V) 1589 #define FPCR_NZCVQC_MASK (FPCR_NZCV_MASK | FPCR_QC) 1590 1591 static inline uint32_t vfp_get_fpsr(CPUARMState *env) 1592 { 1593 return vfp_get_fpscr(env) & FPSR_MASK; 1594 } 1595 1596 static inline void vfp_set_fpsr(CPUARMState *env, uint32_t val) 1597 { 1598 uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPSR_MASK) | (val & FPSR_MASK); 1599 vfp_set_fpscr(env, new_fpscr); 1600 } 1601 1602 static inline uint32_t vfp_get_fpcr(CPUARMState *env) 1603 { 1604 return vfp_get_fpscr(env) & FPCR_MASK; 1605 } 1606 1607 static inline void vfp_set_fpcr(CPUARMState *env, uint32_t val) 1608 { 1609 uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPCR_MASK) | (val & FPCR_MASK); 1610 vfp_set_fpscr(env, new_fpscr); 1611 } 1612 1613 enum arm_cpu_mode { 1614 ARM_CPU_MODE_USR = 0x10, 1615 ARM_CPU_MODE_FIQ = 0x11, 1616 ARM_CPU_MODE_IRQ = 0x12, 1617 ARM_CPU_MODE_SVC = 0x13, 1618 ARM_CPU_MODE_MON = 0x16, 1619 ARM_CPU_MODE_ABT = 0x17, 1620 ARM_CPU_MODE_HYP = 0x1a, 1621 ARM_CPU_MODE_UND = 0x1b, 1622 ARM_CPU_MODE_SYS = 0x1f 1623 }; 1624 1625 /* VFP system registers. */ 1626 #define ARM_VFP_FPSID 0 1627 #define ARM_VFP_FPSCR 1 1628 #define ARM_VFP_MVFR2 5 1629 #define ARM_VFP_MVFR1 6 1630 #define ARM_VFP_MVFR0 7 1631 #define ARM_VFP_FPEXC 8 1632 #define ARM_VFP_FPINST 9 1633 #define ARM_VFP_FPINST2 10 1634 /* These ones are M-profile only */ 1635 #define ARM_VFP_FPSCR_NZCVQC 2 1636 #define ARM_VFP_VPR 12 1637 #define ARM_VFP_P0 13 1638 #define ARM_VFP_FPCXT_NS 14 1639 #define ARM_VFP_FPCXT_S 15 1640 1641 /* QEMU-internal value meaning "FPSCR, but we care only about NZCV" */ 1642 #define QEMU_VFP_FPSCR_NZCV 0xffff 1643 1644 /* iwMMXt coprocessor control registers. */ 1645 #define ARM_IWMMXT_wCID 0 1646 #define ARM_IWMMXT_wCon 1 1647 #define ARM_IWMMXT_wCSSF 2 1648 #define ARM_IWMMXT_wCASF 3 1649 #define ARM_IWMMXT_wCGR0 8 1650 #define ARM_IWMMXT_wCGR1 9 1651 #define ARM_IWMMXT_wCGR2 10 1652 #define ARM_IWMMXT_wCGR3 11 1653 1654 /* V7M CCR bits */ 1655 FIELD(V7M_CCR, NONBASETHRDENA, 0, 1) 1656 FIELD(V7M_CCR, USERSETMPEND, 1, 1) 1657 FIELD(V7M_CCR, UNALIGN_TRP, 3, 1) 1658 FIELD(V7M_CCR, DIV_0_TRP, 4, 1) 1659 FIELD(V7M_CCR, BFHFNMIGN, 8, 1) 1660 FIELD(V7M_CCR, STKALIGN, 9, 1) 1661 FIELD(V7M_CCR, STKOFHFNMIGN, 10, 1) 1662 FIELD(V7M_CCR, DC, 16, 1) 1663 FIELD(V7M_CCR, IC, 17, 1) 1664 FIELD(V7M_CCR, BP, 18, 1) 1665 FIELD(V7M_CCR, LOB, 19, 1) 1666 FIELD(V7M_CCR, TRD, 20, 1) 1667 1668 /* V7M SCR bits */ 1669 FIELD(V7M_SCR, SLEEPONEXIT, 1, 1) 1670 FIELD(V7M_SCR, SLEEPDEEP, 2, 1) 1671 FIELD(V7M_SCR, SLEEPDEEPS, 3, 1) 1672 FIELD(V7M_SCR, SEVONPEND, 4, 1) 1673 1674 /* V7M AIRCR bits */ 1675 FIELD(V7M_AIRCR, VECTRESET, 0, 1) 1676 FIELD(V7M_AIRCR, VECTCLRACTIVE, 1, 1) 1677 FIELD(V7M_AIRCR, SYSRESETREQ, 2, 1) 1678 FIELD(V7M_AIRCR, SYSRESETREQS, 3, 1) 1679 FIELD(V7M_AIRCR, PRIGROUP, 8, 3) 1680 FIELD(V7M_AIRCR, BFHFNMINS, 13, 1) 1681 FIELD(V7M_AIRCR, PRIS, 14, 1) 1682 FIELD(V7M_AIRCR, ENDIANNESS, 15, 1) 1683 FIELD(V7M_AIRCR, VECTKEY, 16, 16) 1684 1685 /* V7M CFSR bits for MMFSR */ 1686 FIELD(V7M_CFSR, IACCVIOL, 0, 1) 1687 FIELD(V7M_CFSR, DACCVIOL, 1, 1) 1688 FIELD(V7M_CFSR, MUNSTKERR, 3, 1) 1689 FIELD(V7M_CFSR, MSTKERR, 4, 1) 1690 FIELD(V7M_CFSR, MLSPERR, 5, 1) 1691 FIELD(V7M_CFSR, MMARVALID, 7, 1) 1692 1693 /* V7M CFSR bits for BFSR */ 1694 FIELD(V7M_CFSR, IBUSERR, 8 + 0, 1) 1695 FIELD(V7M_CFSR, PRECISERR, 8 + 1, 1) 1696 FIELD(V7M_CFSR, IMPRECISERR, 8 + 2, 1) 1697 FIELD(V7M_CFSR, UNSTKERR, 8 + 3, 1) 1698 FIELD(V7M_CFSR, STKERR, 8 + 4, 1) 1699 FIELD(V7M_CFSR, LSPERR, 8 + 5, 1) 1700 FIELD(V7M_CFSR, BFARVALID, 8 + 7, 1) 1701 1702 /* V7M CFSR bits for UFSR */ 1703 FIELD(V7M_CFSR, UNDEFINSTR, 16 + 0, 1) 1704 FIELD(V7M_CFSR, INVSTATE, 16 + 1, 1) 1705 FIELD(V7M_CFSR, INVPC, 16 + 2, 1) 1706 FIELD(V7M_CFSR, NOCP, 16 + 3, 1) 1707 FIELD(V7M_CFSR, STKOF, 16 + 4, 1) 1708 FIELD(V7M_CFSR, UNALIGNED, 16 + 8, 1) 1709 FIELD(V7M_CFSR, DIVBYZERO, 16 + 9, 1) 1710 1711 /* V7M CFSR bit masks covering all of the subregister bits */ 1712 FIELD(V7M_CFSR, MMFSR, 0, 8) 1713 FIELD(V7M_CFSR, BFSR, 8, 8) 1714 FIELD(V7M_CFSR, UFSR, 16, 16) 1715 1716 /* V7M HFSR bits */ 1717 FIELD(V7M_HFSR, VECTTBL, 1, 1) 1718 FIELD(V7M_HFSR, FORCED, 30, 1) 1719 FIELD(V7M_HFSR, DEBUGEVT, 31, 1) 1720 1721 /* V7M DFSR bits */ 1722 FIELD(V7M_DFSR, HALTED, 0, 1) 1723 FIELD(V7M_DFSR, BKPT, 1, 1) 1724 FIELD(V7M_DFSR, DWTTRAP, 2, 1) 1725 FIELD(V7M_DFSR, VCATCH, 3, 1) 1726 FIELD(V7M_DFSR, EXTERNAL, 4, 1) 1727 1728 /* V7M SFSR bits */ 1729 FIELD(V7M_SFSR, INVEP, 0, 1) 1730 FIELD(V7M_SFSR, INVIS, 1, 1) 1731 FIELD(V7M_SFSR, INVER, 2, 1) 1732 FIELD(V7M_SFSR, AUVIOL, 3, 1) 1733 FIELD(V7M_SFSR, INVTRAN, 4, 1) 1734 FIELD(V7M_SFSR, LSPERR, 5, 1) 1735 FIELD(V7M_SFSR, SFARVALID, 6, 1) 1736 FIELD(V7M_SFSR, LSERR, 7, 1) 1737 1738 /* v7M MPU_CTRL bits */ 1739 FIELD(V7M_MPU_CTRL, ENABLE, 0, 1) 1740 FIELD(V7M_MPU_CTRL, HFNMIENA, 1, 1) 1741 FIELD(V7M_MPU_CTRL, PRIVDEFENA, 2, 1) 1742 1743 /* v7M CLIDR bits */ 1744 FIELD(V7M_CLIDR, CTYPE_ALL, 0, 21) 1745 FIELD(V7M_CLIDR, LOUIS, 21, 3) 1746 FIELD(V7M_CLIDR, LOC, 24, 3) 1747 FIELD(V7M_CLIDR, LOUU, 27, 3) 1748 FIELD(V7M_CLIDR, ICB, 30, 2) 1749 1750 FIELD(V7M_CSSELR, IND, 0, 1) 1751 FIELD(V7M_CSSELR, LEVEL, 1, 3) 1752 /* We use the combination of InD and Level to index into cpu->ccsidr[]; 1753 * define a mask for this and check that it doesn't permit running off 1754 * the end of the array. 1755 */ 1756 FIELD(V7M_CSSELR, INDEX, 0, 4) 1757 1758 /* v7M FPCCR bits */ 1759 FIELD(V7M_FPCCR, LSPACT, 0, 1) 1760 FIELD(V7M_FPCCR, USER, 1, 1) 1761 FIELD(V7M_FPCCR, S, 2, 1) 1762 FIELD(V7M_FPCCR, THREAD, 3, 1) 1763 FIELD(V7M_FPCCR, HFRDY, 4, 1) 1764 FIELD(V7M_FPCCR, MMRDY, 5, 1) 1765 FIELD(V7M_FPCCR, BFRDY, 6, 1) 1766 FIELD(V7M_FPCCR, SFRDY, 7, 1) 1767 FIELD(V7M_FPCCR, MONRDY, 8, 1) 1768 FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) 1769 FIELD(V7M_FPCCR, UFRDY, 10, 1) 1770 FIELD(V7M_FPCCR, RES0, 11, 15) 1771 FIELD(V7M_FPCCR, TS, 26, 1) 1772 FIELD(V7M_FPCCR, CLRONRETS, 27, 1) 1773 FIELD(V7M_FPCCR, CLRONRET, 28, 1) 1774 FIELD(V7M_FPCCR, LSPENS, 29, 1) 1775 FIELD(V7M_FPCCR, LSPEN, 30, 1) 1776 FIELD(V7M_FPCCR, ASPEN, 31, 1) 1777 /* These bits are banked. Others are non-banked and live in the M_REG_S bank */ 1778 #define R_V7M_FPCCR_BANKED_MASK \ 1779 (R_V7M_FPCCR_LSPACT_MASK | \ 1780 R_V7M_FPCCR_USER_MASK | \ 1781 R_V7M_FPCCR_THREAD_MASK | \ 1782 R_V7M_FPCCR_MMRDY_MASK | \ 1783 R_V7M_FPCCR_SPLIMVIOL_MASK | \ 1784 R_V7M_FPCCR_UFRDY_MASK | \ 1785 R_V7M_FPCCR_ASPEN_MASK) 1786 1787 /* v7M VPR bits */ 1788 FIELD(V7M_VPR, P0, 0, 16) 1789 FIELD(V7M_VPR, MASK01, 16, 4) 1790 FIELD(V7M_VPR, MASK23, 20, 4) 1791 1792 /* 1793 * System register ID fields. 1794 */ 1795 FIELD(CLIDR_EL1, CTYPE1, 0, 3) 1796 FIELD(CLIDR_EL1, CTYPE2, 3, 3) 1797 FIELD(CLIDR_EL1, CTYPE3, 6, 3) 1798 FIELD(CLIDR_EL1, CTYPE4, 9, 3) 1799 FIELD(CLIDR_EL1, CTYPE5, 12, 3) 1800 FIELD(CLIDR_EL1, CTYPE6, 15, 3) 1801 FIELD(CLIDR_EL1, CTYPE7, 18, 3) 1802 FIELD(CLIDR_EL1, LOUIS, 21, 3) 1803 FIELD(CLIDR_EL1, LOC, 24, 3) 1804 FIELD(CLIDR_EL1, LOUU, 27, 3) 1805 FIELD(CLIDR_EL1, ICB, 30, 3) 1806 1807 /* When FEAT_CCIDX is implemented */ 1808 FIELD(CCSIDR_EL1, CCIDX_LINESIZE, 0, 3) 1809 FIELD(CCSIDR_EL1, CCIDX_ASSOCIATIVITY, 3, 21) 1810 FIELD(CCSIDR_EL1, CCIDX_NUMSETS, 32, 24) 1811 1812 /* When FEAT_CCIDX is not implemented */ 1813 FIELD(CCSIDR_EL1, LINESIZE, 0, 3) 1814 FIELD(CCSIDR_EL1, ASSOCIATIVITY, 3, 10) 1815 FIELD(CCSIDR_EL1, NUMSETS, 13, 15) 1816 1817 FIELD(CTR_EL0, IMINLINE, 0, 4) 1818 FIELD(CTR_EL0, L1IP, 14, 2) 1819 FIELD(CTR_EL0, DMINLINE, 16, 4) 1820 FIELD(CTR_EL0, ERG, 20, 4) 1821 FIELD(CTR_EL0, CWG, 24, 4) 1822 FIELD(CTR_EL0, IDC, 28, 1) 1823 FIELD(CTR_EL0, DIC, 29, 1) 1824 FIELD(CTR_EL0, TMINLINE, 32, 6) 1825 1826 FIELD(MIDR_EL1, REVISION, 0, 4) 1827 FIELD(MIDR_EL1, PARTNUM, 4, 12) 1828 FIELD(MIDR_EL1, ARCHITECTURE, 16, 4) 1829 FIELD(MIDR_EL1, VARIANT, 20, 4) 1830 FIELD(MIDR_EL1, IMPLEMENTER, 24, 8) 1831 1832 FIELD(ID_ISAR0, SWAP, 0, 4) 1833 FIELD(ID_ISAR0, BITCOUNT, 4, 4) 1834 FIELD(ID_ISAR0, BITFIELD, 8, 4) 1835 FIELD(ID_ISAR0, CMPBRANCH, 12, 4) 1836 FIELD(ID_ISAR0, COPROC, 16, 4) 1837 FIELD(ID_ISAR0, DEBUG, 20, 4) 1838 FIELD(ID_ISAR0, DIVIDE, 24, 4) 1839 1840 FIELD(ID_ISAR1, ENDIAN, 0, 4) 1841 FIELD(ID_ISAR1, EXCEPT, 4, 4) 1842 FIELD(ID_ISAR1, EXCEPT_AR, 8, 4) 1843 FIELD(ID_ISAR1, EXTEND, 12, 4) 1844 FIELD(ID_ISAR1, IFTHEN, 16, 4) 1845 FIELD(ID_ISAR1, IMMEDIATE, 20, 4) 1846 FIELD(ID_ISAR1, INTERWORK, 24, 4) 1847 FIELD(ID_ISAR1, JAZELLE, 28, 4) 1848 1849 FIELD(ID_ISAR2, LOADSTORE, 0, 4) 1850 FIELD(ID_ISAR2, MEMHINT, 4, 4) 1851 FIELD(ID_ISAR2, MULTIACCESSINT, 8, 4) 1852 FIELD(ID_ISAR2, MULT, 12, 4) 1853 FIELD(ID_ISAR2, MULTS, 16, 4) 1854 FIELD(ID_ISAR2, MULTU, 20, 4) 1855 FIELD(ID_ISAR2, PSR_AR, 24, 4) 1856 FIELD(ID_ISAR2, REVERSAL, 28, 4) 1857 1858 FIELD(ID_ISAR3, SATURATE, 0, 4) 1859 FIELD(ID_ISAR3, SIMD, 4, 4) 1860 FIELD(ID_ISAR3, SVC, 8, 4) 1861 FIELD(ID_ISAR3, SYNCHPRIM, 12, 4) 1862 FIELD(ID_ISAR3, TABBRANCH, 16, 4) 1863 FIELD(ID_ISAR3, T32COPY, 20, 4) 1864 FIELD(ID_ISAR3, TRUENOP, 24, 4) 1865 FIELD(ID_ISAR3, T32EE, 28, 4) 1866 1867 FIELD(ID_ISAR4, UNPRIV, 0, 4) 1868 FIELD(ID_ISAR4, WITHSHIFTS, 4, 4) 1869 FIELD(ID_ISAR4, WRITEBACK, 8, 4) 1870 FIELD(ID_ISAR4, SMC, 12, 4) 1871 FIELD(ID_ISAR4, BARRIER, 16, 4) 1872 FIELD(ID_ISAR4, SYNCHPRIM_FRAC, 20, 4) 1873 FIELD(ID_ISAR4, PSR_M, 24, 4) 1874 FIELD(ID_ISAR4, SWP_FRAC, 28, 4) 1875 1876 FIELD(ID_ISAR5, SEVL, 0, 4) 1877 FIELD(ID_ISAR5, AES, 4, 4) 1878 FIELD(ID_ISAR5, SHA1, 8, 4) 1879 FIELD(ID_ISAR5, SHA2, 12, 4) 1880 FIELD(ID_ISAR5, CRC32, 16, 4) 1881 FIELD(ID_ISAR5, RDM, 24, 4) 1882 FIELD(ID_ISAR5, VCMA, 28, 4) 1883 1884 FIELD(ID_ISAR6, JSCVT, 0, 4) 1885 FIELD(ID_ISAR6, DP, 4, 4) 1886 FIELD(ID_ISAR6, FHM, 8, 4) 1887 FIELD(ID_ISAR6, SB, 12, 4) 1888 FIELD(ID_ISAR6, SPECRES, 16, 4) 1889 FIELD(ID_ISAR6, BF16, 20, 4) 1890 FIELD(ID_ISAR6, I8MM, 24, 4) 1891 1892 FIELD(ID_MMFR0, VMSA, 0, 4) 1893 FIELD(ID_MMFR0, PMSA, 4, 4) 1894 FIELD(ID_MMFR0, OUTERSHR, 8, 4) 1895 FIELD(ID_MMFR0, SHARELVL, 12, 4) 1896 FIELD(ID_MMFR0, TCM, 16, 4) 1897 FIELD(ID_MMFR0, AUXREG, 20, 4) 1898 FIELD(ID_MMFR0, FCSE, 24, 4) 1899 FIELD(ID_MMFR0, INNERSHR, 28, 4) 1900 1901 FIELD(ID_MMFR1, L1HVDVA, 0, 4) 1902 FIELD(ID_MMFR1, L1UNIVA, 4, 4) 1903 FIELD(ID_MMFR1, L1HVDSW, 8, 4) 1904 FIELD(ID_MMFR1, L1UNISW, 12, 4) 1905 FIELD(ID_MMFR1, L1HVD, 16, 4) 1906 FIELD(ID_MMFR1, L1UNI, 20, 4) 1907 FIELD(ID_MMFR1, L1TSTCLN, 24, 4) 1908 FIELD(ID_MMFR1, BPRED, 28, 4) 1909 1910 FIELD(ID_MMFR2, L1HVDFG, 0, 4) 1911 FIELD(ID_MMFR2, L1HVDBG, 4, 4) 1912 FIELD(ID_MMFR2, L1HVDRNG, 8, 4) 1913 FIELD(ID_MMFR2, HVDTLB, 12, 4) 1914 FIELD(ID_MMFR2, UNITLB, 16, 4) 1915 FIELD(ID_MMFR2, MEMBARR, 20, 4) 1916 FIELD(ID_MMFR2, WFISTALL, 24, 4) 1917 FIELD(ID_MMFR2, HWACCFLG, 28, 4) 1918 1919 FIELD(ID_MMFR3, CMAINTVA, 0, 4) 1920 FIELD(ID_MMFR3, CMAINTSW, 4, 4) 1921 FIELD(ID_MMFR3, BPMAINT, 8, 4) 1922 FIELD(ID_MMFR3, MAINTBCST, 12, 4) 1923 FIELD(ID_MMFR3, PAN, 16, 4) 1924 FIELD(ID_MMFR3, COHWALK, 20, 4) 1925 FIELD(ID_MMFR3, CMEMSZ, 24, 4) 1926 FIELD(ID_MMFR3, SUPERSEC, 28, 4) 1927 1928 FIELD(ID_MMFR4, SPECSEI, 0, 4) 1929 FIELD(ID_MMFR4, AC2, 4, 4) 1930 FIELD(ID_MMFR4, XNX, 8, 4) 1931 FIELD(ID_MMFR4, CNP, 12, 4) 1932 FIELD(ID_MMFR4, HPDS, 16, 4) 1933 FIELD(ID_MMFR4, LSM, 20, 4) 1934 FIELD(ID_MMFR4, CCIDX, 24, 4) 1935 FIELD(ID_MMFR4, EVT, 28, 4) 1936 1937 FIELD(ID_MMFR5, ETS, 0, 4) 1938 1939 FIELD(ID_PFR0, STATE0, 0, 4) 1940 FIELD(ID_PFR0, STATE1, 4, 4) 1941 FIELD(ID_PFR0, STATE2, 8, 4) 1942 FIELD(ID_PFR0, STATE3, 12, 4) 1943 FIELD(ID_PFR0, CSV2, 16, 4) 1944 FIELD(ID_PFR0, AMU, 20, 4) 1945 FIELD(ID_PFR0, DIT, 24, 4) 1946 FIELD(ID_PFR0, RAS, 28, 4) 1947 1948 FIELD(ID_PFR1, PROGMOD, 0, 4) 1949 FIELD(ID_PFR1, SECURITY, 4, 4) 1950 FIELD(ID_PFR1, MPROGMOD, 8, 4) 1951 FIELD(ID_PFR1, VIRTUALIZATION, 12, 4) 1952 FIELD(ID_PFR1, GENTIMER, 16, 4) 1953 FIELD(ID_PFR1, SEC_FRAC, 20, 4) 1954 FIELD(ID_PFR1, VIRT_FRAC, 24, 4) 1955 FIELD(ID_PFR1, GIC, 28, 4) 1956 1957 FIELD(ID_PFR2, CSV3, 0, 4) 1958 FIELD(ID_PFR2, SSBS, 4, 4) 1959 FIELD(ID_PFR2, RAS_FRAC, 8, 4) 1960 1961 FIELD(ID_AA64ISAR0, AES, 4, 4) 1962 FIELD(ID_AA64ISAR0, SHA1, 8, 4) 1963 FIELD(ID_AA64ISAR0, SHA2, 12, 4) 1964 FIELD(ID_AA64ISAR0, CRC32, 16, 4) 1965 FIELD(ID_AA64ISAR0, ATOMIC, 20, 4) 1966 FIELD(ID_AA64ISAR0, RDM, 28, 4) 1967 FIELD(ID_AA64ISAR0, SHA3, 32, 4) 1968 FIELD(ID_AA64ISAR0, SM3, 36, 4) 1969 FIELD(ID_AA64ISAR0, SM4, 40, 4) 1970 FIELD(ID_AA64ISAR0, DP, 44, 4) 1971 FIELD(ID_AA64ISAR0, FHM, 48, 4) 1972 FIELD(ID_AA64ISAR0, TS, 52, 4) 1973 FIELD(ID_AA64ISAR0, TLB, 56, 4) 1974 FIELD(ID_AA64ISAR0, RNDR, 60, 4) 1975 1976 FIELD(ID_AA64ISAR1, DPB, 0, 4) 1977 FIELD(ID_AA64ISAR1, APA, 4, 4) 1978 FIELD(ID_AA64ISAR1, API, 8, 4) 1979 FIELD(ID_AA64ISAR1, JSCVT, 12, 4) 1980 FIELD(ID_AA64ISAR1, FCMA, 16, 4) 1981 FIELD(ID_AA64ISAR1, LRCPC, 20, 4) 1982 FIELD(ID_AA64ISAR1, GPA, 24, 4) 1983 FIELD(ID_AA64ISAR1, GPI, 28, 4) 1984 FIELD(ID_AA64ISAR1, FRINTTS, 32, 4) 1985 FIELD(ID_AA64ISAR1, SB, 36, 4) 1986 FIELD(ID_AA64ISAR1, SPECRES, 40, 4) 1987 FIELD(ID_AA64ISAR1, BF16, 44, 4) 1988 FIELD(ID_AA64ISAR1, DGH, 48, 4) 1989 FIELD(ID_AA64ISAR1, I8MM, 52, 4) 1990 1991 FIELD(ID_AA64PFR0, EL0, 0, 4) 1992 FIELD(ID_AA64PFR0, EL1, 4, 4) 1993 FIELD(ID_AA64PFR0, EL2, 8, 4) 1994 FIELD(ID_AA64PFR0, EL3, 12, 4) 1995 FIELD(ID_AA64PFR0, FP, 16, 4) 1996 FIELD(ID_AA64PFR0, ADVSIMD, 20, 4) 1997 FIELD(ID_AA64PFR0, GIC, 24, 4) 1998 FIELD(ID_AA64PFR0, RAS, 28, 4) 1999 FIELD(ID_AA64PFR0, SVE, 32, 4) 2000 FIELD(ID_AA64PFR0, SEL2, 36, 4) 2001 FIELD(ID_AA64PFR0, MPAM, 40, 4) 2002 FIELD(ID_AA64PFR0, AMU, 44, 4) 2003 FIELD(ID_AA64PFR0, DIT, 48, 4) 2004 FIELD(ID_AA64PFR0, CSV2, 56, 4) 2005 FIELD(ID_AA64PFR0, CSV3, 60, 4) 2006 2007 FIELD(ID_AA64PFR1, BT, 0, 4) 2008 FIELD(ID_AA64PFR1, SSBS, 4, 4) 2009 FIELD(ID_AA64PFR1, MTE, 8, 4) 2010 FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4) 2011 FIELD(ID_AA64PFR1, MPAM_FRAC, 16, 4) 2012 2013 FIELD(ID_AA64MMFR0, PARANGE, 0, 4) 2014 FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4) 2015 FIELD(ID_AA64MMFR0, BIGEND, 8, 4) 2016 FIELD(ID_AA64MMFR0, SNSMEM, 12, 4) 2017 FIELD(ID_AA64MMFR0, BIGENDEL0, 16, 4) 2018 FIELD(ID_AA64MMFR0, TGRAN16, 20, 4) 2019 FIELD(ID_AA64MMFR0, TGRAN64, 24, 4) 2020 FIELD(ID_AA64MMFR0, TGRAN4, 28, 4) 2021 FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4) 2022 FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4) 2023 FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4) 2024 FIELD(ID_AA64MMFR0, EXS, 44, 4) 2025 FIELD(ID_AA64MMFR0, FGT, 56, 4) 2026 FIELD(ID_AA64MMFR0, ECV, 60, 4) 2027 2028 FIELD(ID_AA64MMFR1, HAFDBS, 0, 4) 2029 FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4) 2030 FIELD(ID_AA64MMFR1, VH, 8, 4) 2031 FIELD(ID_AA64MMFR1, HPDS, 12, 4) 2032 FIELD(ID_AA64MMFR1, LO, 16, 4) 2033 FIELD(ID_AA64MMFR1, PAN, 20, 4) 2034 FIELD(ID_AA64MMFR1, SPECSEI, 24, 4) 2035 FIELD(ID_AA64MMFR1, XNX, 28, 4) 2036 FIELD(ID_AA64MMFR1, TWED, 32, 4) 2037 FIELD(ID_AA64MMFR1, ETS, 36, 4) 2038 2039 FIELD(ID_AA64MMFR2, CNP, 0, 4) 2040 FIELD(ID_AA64MMFR2, UAO, 4, 4) 2041 FIELD(ID_AA64MMFR2, LSM, 8, 4) 2042 FIELD(ID_AA64MMFR2, IESB, 12, 4) 2043 FIELD(ID_AA64MMFR2, VARANGE, 16, 4) 2044 FIELD(ID_AA64MMFR2, CCIDX, 20, 4) 2045 FIELD(ID_AA64MMFR2, NV, 24, 4) 2046 FIELD(ID_AA64MMFR2, ST, 28, 4) 2047 FIELD(ID_AA64MMFR2, AT, 32, 4) 2048 FIELD(ID_AA64MMFR2, IDS, 36, 4) 2049 FIELD(ID_AA64MMFR2, FWB, 40, 4) 2050 FIELD(ID_AA64MMFR2, TTL, 48, 4) 2051 FIELD(ID_AA64MMFR2, BBM, 52, 4) 2052 FIELD(ID_AA64MMFR2, EVT, 56, 4) 2053 FIELD(ID_AA64MMFR2, E0PD, 60, 4) 2054 2055 FIELD(ID_AA64DFR0, DEBUGVER, 0, 4) 2056 FIELD(ID_AA64DFR0, TRACEVER, 4, 4) 2057 FIELD(ID_AA64DFR0, PMUVER, 8, 4) 2058 FIELD(ID_AA64DFR0, BRPS, 12, 4) 2059 FIELD(ID_AA64DFR0, WRPS, 20, 4) 2060 FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4) 2061 FIELD(ID_AA64DFR0, PMSVER, 32, 4) 2062 FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4) 2063 FIELD(ID_AA64DFR0, TRACEFILT, 40, 4) 2064 FIELD(ID_AA64DFR0, MTPMU, 48, 4) 2065 2066 FIELD(ID_AA64ZFR0, SVEVER, 0, 4) 2067 FIELD(ID_AA64ZFR0, AES, 4, 4) 2068 FIELD(ID_AA64ZFR0, BITPERM, 16, 4) 2069 FIELD(ID_AA64ZFR0, BFLOAT16, 20, 4) 2070 FIELD(ID_AA64ZFR0, SHA3, 32, 4) 2071 FIELD(ID_AA64ZFR0, SM4, 40, 4) 2072 FIELD(ID_AA64ZFR0, I8MM, 44, 4) 2073 FIELD(ID_AA64ZFR0, F32MM, 52, 4) 2074 FIELD(ID_AA64ZFR0, F64MM, 56, 4) 2075 2076 FIELD(ID_DFR0, COPDBG, 0, 4) 2077 FIELD(ID_DFR0, COPSDBG, 4, 4) 2078 FIELD(ID_DFR0, MMAPDBG, 8, 4) 2079 FIELD(ID_DFR0, COPTRC, 12, 4) 2080 FIELD(ID_DFR0, MMAPTRC, 16, 4) 2081 FIELD(ID_DFR0, MPROFDBG, 20, 4) 2082 FIELD(ID_DFR0, PERFMON, 24, 4) 2083 FIELD(ID_DFR0, TRACEFILT, 28, 4) 2084 2085 FIELD(ID_DFR1, MTPMU, 0, 4) 2086 2087 FIELD(DBGDIDR, SE_IMP, 12, 1) 2088 FIELD(DBGDIDR, NSUHD_IMP, 14, 1) 2089 FIELD(DBGDIDR, VERSION, 16, 4) 2090 FIELD(DBGDIDR, CTX_CMPS, 20, 4) 2091 FIELD(DBGDIDR, BRPS, 24, 4) 2092 FIELD(DBGDIDR, WRPS, 28, 4) 2093 2094 FIELD(MVFR0, SIMDREG, 0, 4) 2095 FIELD(MVFR0, FPSP, 4, 4) 2096 FIELD(MVFR0, FPDP, 8, 4) 2097 FIELD(MVFR0, FPTRAP, 12, 4) 2098 FIELD(MVFR0, FPDIVIDE, 16, 4) 2099 FIELD(MVFR0, FPSQRT, 20, 4) 2100 FIELD(MVFR0, FPSHVEC, 24, 4) 2101 FIELD(MVFR0, FPROUND, 28, 4) 2102 2103 FIELD(MVFR1, FPFTZ, 0, 4) 2104 FIELD(MVFR1, FPDNAN, 4, 4) 2105 FIELD(MVFR1, SIMDLS, 8, 4) /* A-profile only */ 2106 FIELD(MVFR1, SIMDINT, 12, 4) /* A-profile only */ 2107 FIELD(MVFR1, SIMDSP, 16, 4) /* A-profile only */ 2108 FIELD(MVFR1, SIMDHP, 20, 4) /* A-profile only */ 2109 FIELD(MVFR1, MVE, 8, 4) /* M-profile only */ 2110 FIELD(MVFR1, FP16, 20, 4) /* M-profile only */ 2111 FIELD(MVFR1, FPHP, 24, 4) 2112 FIELD(MVFR1, SIMDFMAC, 28, 4) 2113 2114 FIELD(MVFR2, SIMDMISC, 0, 4) 2115 FIELD(MVFR2, FPMISC, 4, 4) 2116 2117 QEMU_BUILD_BUG_ON(ARRAY_SIZE(((ARMCPU *)0)->ccsidr) <= R_V7M_CSSELR_INDEX_MASK); 2118 2119 /* If adding a feature bit which corresponds to a Linux ELF 2120 * HWCAP bit, remember to update the feature-bit-to-hwcap 2121 * mapping in linux-user/elfload.c:get_elf_hwcap(). 2122 */ 2123 enum arm_features { 2124 ARM_FEATURE_AUXCR, /* ARM1026 Auxiliary control register. */ 2125 ARM_FEATURE_XSCALE, /* Intel XScale extensions. */ 2126 ARM_FEATURE_IWMMXT, /* Intel iwMMXt extension. */ 2127 ARM_FEATURE_V6, 2128 ARM_FEATURE_V6K, 2129 ARM_FEATURE_V7, 2130 ARM_FEATURE_THUMB2, 2131 ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */ 2132 ARM_FEATURE_NEON, 2133 ARM_FEATURE_M, /* Microcontroller profile. */ 2134 ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling. */ 2135 ARM_FEATURE_THUMB2EE, 2136 ARM_FEATURE_V7MP, /* v7 Multiprocessing Extensions */ 2137 ARM_FEATURE_V7VE, /* v7 Virtualization Extensions (non-EL2 parts) */ 2138 ARM_FEATURE_V4T, 2139 ARM_FEATURE_V5, 2140 ARM_FEATURE_STRONGARM, 2141 ARM_FEATURE_VAPA, /* cp15 VA to PA lookups */ 2142 ARM_FEATURE_GENERIC_TIMER, 2143 ARM_FEATURE_MVFR, /* Media and VFP Feature Registers 0 and 1 */ 2144 ARM_FEATURE_DUMMY_C15_REGS, /* RAZ/WI all of cp15 crn=15 */ 2145 ARM_FEATURE_CACHE_TEST_CLEAN, /* 926/1026 style test-and-clean ops */ 2146 ARM_FEATURE_CACHE_DIRTY_REG, /* 1136/1176 cache dirty status register */ 2147 ARM_FEATURE_CACHE_BLOCK_OPS, /* v6 optional cache block operations */ 2148 ARM_FEATURE_MPIDR, /* has cp15 MPIDR */ 2149 ARM_FEATURE_LPAE, /* has Large Physical Address Extension */ 2150 ARM_FEATURE_V8, 2151 ARM_FEATURE_AARCH64, /* supports 64 bit mode */ 2152 ARM_FEATURE_CBAR, /* has cp15 CBAR */ 2153 ARM_FEATURE_CBAR_RO, /* has cp15 CBAR and it is read-only */ 2154 ARM_FEATURE_EL2, /* has EL2 Virtualization support */ 2155 ARM_FEATURE_EL3, /* has EL3 Secure monitor support */ 2156 ARM_FEATURE_THUMB_DSP, /* DSP insns supported in the Thumb encodings */ 2157 ARM_FEATURE_PMU, /* has PMU support */ 2158 ARM_FEATURE_VBAR, /* has cp15 VBAR */ 2159 ARM_FEATURE_M_SECURITY, /* M profile Security Extension */ 2160 ARM_FEATURE_M_MAIN, /* M profile Main Extension */ 2161 ARM_FEATURE_V8_1M, /* M profile extras only in v8.1M and later */ 2162 }; 2163 2164 static inline int arm_feature(CPUARMState *env, int feature) 2165 { 2166 return (env->features & (1ULL << feature)) != 0; 2167 } 2168 2169 void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp); 2170 2171 #if !defined(CONFIG_USER_ONLY) 2172 /* Return true if exception levels below EL3 are in secure state, 2173 * or would be following an exception return to that level. 2174 * Unlike arm_is_secure() (which is always a question about the 2175 * _current_ state of the CPU) this doesn't care about the current 2176 * EL or mode. 2177 */ 2178 static inline bool arm_is_secure_below_el3(CPUARMState *env) 2179 { 2180 if (arm_feature(env, ARM_FEATURE_EL3)) { 2181 return !(env->cp15.scr_el3 & SCR_NS); 2182 } else { 2183 /* If EL3 is not supported then the secure state is implementation 2184 * defined, in which case QEMU defaults to non-secure. 2185 */ 2186 return false; 2187 } 2188 } 2189 2190 /* Return true if the CPU is AArch64 EL3 or AArch32 Mon */ 2191 static inline bool arm_is_el3_or_mon(CPUARMState *env) 2192 { 2193 if (arm_feature(env, ARM_FEATURE_EL3)) { 2194 if (is_a64(env) && extract32(env->pstate, 2, 2) == 3) { 2195 /* CPU currently in AArch64 state and EL3 */ 2196 return true; 2197 } else if (!is_a64(env) && 2198 (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) { 2199 /* CPU currently in AArch32 state and monitor mode */ 2200 return true; 2201 } 2202 } 2203 return false; 2204 } 2205 2206 /* Return true if the processor is in secure state */ 2207 static inline bool arm_is_secure(CPUARMState *env) 2208 { 2209 if (arm_is_el3_or_mon(env)) { 2210 return true; 2211 } 2212 return arm_is_secure_below_el3(env); 2213 } 2214 2215 /* 2216 * Return true if the current security state has AArch64 EL2 or AArch32 Hyp. 2217 * This corresponds to the pseudocode EL2Enabled() 2218 */ 2219 static inline bool arm_is_el2_enabled(CPUARMState *env) 2220 { 2221 if (arm_feature(env, ARM_FEATURE_EL2)) { 2222 if (arm_is_secure_below_el3(env)) { 2223 return (env->cp15.scr_el3 & SCR_EEL2) != 0; 2224 } 2225 return true; 2226 } 2227 return false; 2228 } 2229 2230 #else 2231 static inline bool arm_is_secure_below_el3(CPUARMState *env) 2232 { 2233 return false; 2234 } 2235 2236 static inline bool arm_is_secure(CPUARMState *env) 2237 { 2238 return false; 2239 } 2240 2241 static inline bool arm_is_el2_enabled(CPUARMState *env) 2242 { 2243 return false; 2244 } 2245 #endif 2246 2247 /** 2248 * arm_hcr_el2_eff(): Return the effective value of HCR_EL2. 2249 * E.g. when in secure state, fields in HCR_EL2 are suppressed, 2250 * "for all purposes other than a direct read or write access of HCR_EL2." 2251 * Not included here is HCR_RW. 2252 */ 2253 uint64_t arm_hcr_el2_eff(CPUARMState *env); 2254 2255 /* Return true if the specified exception level is running in AArch64 state. */ 2256 static inline bool arm_el_is_aa64(CPUARMState *env, int el) 2257 { 2258 /* This isn't valid for EL0 (if we're in EL0, is_a64() is what you want, 2259 * and if we're not in EL0 then the state of EL0 isn't well defined.) 2260 */ 2261 assert(el >= 1 && el <= 3); 2262 bool aa64 = arm_feature(env, ARM_FEATURE_AARCH64); 2263 2264 /* The highest exception level is always at the maximum supported 2265 * register width, and then lower levels have a register width controlled 2266 * by bits in the SCR or HCR registers. 2267 */ 2268 if (el == 3) { 2269 return aa64; 2270 } 2271 2272 if (arm_feature(env, ARM_FEATURE_EL3) && 2273 ((env->cp15.scr_el3 & SCR_NS) || !(env->cp15.scr_el3 & SCR_EEL2))) { 2274 aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW); 2275 } 2276 2277 if (el == 2) { 2278 return aa64; 2279 } 2280 2281 if (arm_is_el2_enabled(env)) { 2282 aa64 = aa64 && (env->cp15.hcr_el2 & HCR_RW); 2283 } 2284 2285 return aa64; 2286 } 2287 2288 /* Function for determing whether guest cp register reads and writes should 2289 * access the secure or non-secure bank of a cp register. When EL3 is 2290 * operating in AArch32 state, the NS-bit determines whether the secure 2291 * instance of a cp register should be used. When EL3 is AArch64 (or if 2292 * it doesn't exist at all) then there is no register banking, and all 2293 * accesses are to the non-secure version. 2294 */ 2295 static inline bool access_secure_reg(CPUARMState *env) 2296 { 2297 bool ret = (arm_feature(env, ARM_FEATURE_EL3) && 2298 !arm_el_is_aa64(env, 3) && 2299 !(env->cp15.scr_el3 & SCR_NS)); 2300 2301 return ret; 2302 } 2303 2304 /* Macros for accessing a specified CP register bank */ 2305 #define A32_BANKED_REG_GET(_env, _regname, _secure) \ 2306 ((_secure) ? (_env)->cp15._regname##_s : (_env)->cp15._regname##_ns) 2307 2308 #define A32_BANKED_REG_SET(_env, _regname, _secure, _val) \ 2309 do { \ 2310 if (_secure) { \ 2311 (_env)->cp15._regname##_s = (_val); \ 2312 } else { \ 2313 (_env)->cp15._regname##_ns = (_val); \ 2314 } \ 2315 } while (0) 2316 2317 /* Macros for automatically accessing a specific CP register bank depending on 2318 * the current secure state of the system. These macros are not intended for 2319 * supporting instruction translation reads/writes as these are dependent 2320 * solely on the SCR.NS bit and not the mode. 2321 */ 2322 #define A32_BANKED_CURRENT_REG_GET(_env, _regname) \ 2323 A32_BANKED_REG_GET((_env), _regname, \ 2324 (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3))) 2325 2326 #define A32_BANKED_CURRENT_REG_SET(_env, _regname, _val) \ 2327 A32_BANKED_REG_SET((_env), _regname, \ 2328 (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)), \ 2329 (_val)) 2330 2331 void arm_cpu_list(void); 2332 uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, 2333 uint32_t cur_el, bool secure); 2334 2335 /* Interface between CPU and Interrupt controller. */ 2336 #ifndef CONFIG_USER_ONLY 2337 bool armv7m_nvic_can_take_pending_exception(void *opaque); 2338 #else 2339 static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) 2340 { 2341 return true; 2342 } 2343 #endif 2344 /** 2345 * armv7m_nvic_set_pending: mark the specified exception as pending 2346 * @opaque: the NVIC 2347 * @irq: the exception number to mark pending 2348 * @secure: false for non-banked exceptions or for the nonsecure 2349 * version of a banked exception, true for the secure version of a banked 2350 * exception. 2351 * 2352 * Marks the specified exception as pending. Note that we will assert() 2353 * if @secure is true and @irq does not specify one of the fixed set 2354 * of architecturally banked exceptions. 2355 */ 2356 void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); 2357 /** 2358 * armv7m_nvic_set_pending_derived: mark this derived exception as pending 2359 * @opaque: the NVIC 2360 * @irq: the exception number to mark pending 2361 * @secure: false for non-banked exceptions or for the nonsecure 2362 * version of a banked exception, true for the secure version of a banked 2363 * exception. 2364 * 2365 * Similar to armv7m_nvic_set_pending(), but specifically for derived 2366 * exceptions (exceptions generated in the course of trying to take 2367 * a different exception). 2368 */ 2369 void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); 2370 /** 2371 * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending 2372 * @opaque: the NVIC 2373 * @irq: the exception number to mark pending 2374 * @secure: false for non-banked exceptions or for the nonsecure 2375 * version of a banked exception, true for the secure version of a banked 2376 * exception. 2377 * 2378 * Similar to armv7m_nvic_set_pending(), but specifically for exceptions 2379 * generated in the course of lazy stacking of FP registers. 2380 */ 2381 void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); 2382 /** 2383 * armv7m_nvic_get_pending_irq_info: return highest priority pending 2384 * exception, and whether it targets Secure state 2385 * @opaque: the NVIC 2386 * @pirq: set to pending exception number 2387 * @ptargets_secure: set to whether pending exception targets Secure 2388 * 2389 * This function writes the number of the highest priority pending 2390 * exception (the one which would be made active by 2391 * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure 2392 * to true if the current highest priority pending exception should 2393 * be taken to Secure state, false for NS. 2394 */ 2395 void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, 2396 bool *ptargets_secure); 2397 /** 2398 * armv7m_nvic_acknowledge_irq: make highest priority pending exception active 2399 * @opaque: the NVIC 2400 * 2401 * Move the current highest priority pending exception from the pending 2402 * state to the active state, and update v7m.exception to indicate that 2403 * it is the exception currently being handled. 2404 */ 2405 void armv7m_nvic_acknowledge_irq(void *opaque); 2406 /** 2407 * armv7m_nvic_complete_irq: complete specified interrupt or exception 2408 * @opaque: the NVIC 2409 * @irq: the exception number to complete 2410 * @secure: true if this exception was secure 2411 * 2412 * Returns: -1 if the irq was not active 2413 * 1 if completing this irq brought us back to base (no active irqs) 2414 * 0 if there is still an irq active after this one was completed 2415 * (Ignoring -1, this is the same as the RETTOBASE value before completion.) 2416 */ 2417 int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); 2418 /** 2419 * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) 2420 * @opaque: the NVIC 2421 * @irq: the exception number to mark pending 2422 * @secure: false for non-banked exceptions or for the nonsecure 2423 * version of a banked exception, true for the secure version of a banked 2424 * exception. 2425 * 2426 * Return whether an exception is "ready", i.e. whether the exception is 2427 * enabled and is configured at a priority which would allow it to 2428 * interrupt the current execution priority. This controls whether the 2429 * RDY bit for it in the FPCCR is set. 2430 */ 2431 bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); 2432 /** 2433 * armv7m_nvic_raw_execution_priority: return the raw execution priority 2434 * @opaque: the NVIC 2435 * 2436 * Returns: the raw execution priority as defined by the v8M architecture. 2437 * This is the execution priority minus the effects of AIRCR.PRIS, 2438 * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. 2439 * (v8M ARM ARM I_PKLD.) 2440 */ 2441 int armv7m_nvic_raw_execution_priority(void *opaque); 2442 /** 2443 * armv7m_nvic_neg_prio_requested: return true if the requested execution 2444 * priority is negative for the specified security state. 2445 * @opaque: the NVIC 2446 * @secure: the security state to test 2447 * This corresponds to the pseudocode IsReqExecPriNeg(). 2448 */ 2449 #ifndef CONFIG_USER_ONLY 2450 bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); 2451 #else 2452 static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) 2453 { 2454 return false; 2455 } 2456 #endif 2457 2458 /* Interface for defining coprocessor registers. 2459 * Registers are defined in tables of arm_cp_reginfo structs 2460 * which are passed to define_arm_cp_regs(). 2461 */ 2462 2463 /* When looking up a coprocessor register we look for it 2464 * via an integer which encodes all of: 2465 * coprocessor number 2466 * Crn, Crm, opc1, opc2 fields 2467 * 32 or 64 bit register (ie is it accessed via MRC/MCR 2468 * or via MRRC/MCRR?) 2469 * non-secure/secure bank (AArch32 only) 2470 * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. 2471 * (In this case crn and opc2 should be zero.) 2472 * For AArch64, there is no 32/64 bit size distinction; 2473 * instead all registers have a 2 bit op0, 3 bit op1 and op2, 2474 * and 4 bit CRn and CRm. The encoding patterns are chosen 2475 * to be easy to convert to and from the KVM encodings, and also 2476 * so that the hashtable can contain both AArch32 and AArch64 2477 * registers (to allow for interprocessing where we might run 2478 * 32 bit code on a 64 bit core). 2479 */ 2480 /* This bit is private to our hashtable cpreg; in KVM register 2481 * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 2482 * in the upper bits of the 64 bit ID. 2483 */ 2484 #define CP_REG_AA64_SHIFT 28 2485 #define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) 2486 2487 /* To enable banking of coprocessor registers depending on ns-bit we 2488 * add a bit to distinguish between secure and non-secure cpregs in the 2489 * hashtable. 2490 */ 2491 #define CP_REG_NS_SHIFT 29 2492 #define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) 2493 2494 #define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ 2495 ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ 2496 ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) 2497 2498 #define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ 2499 (CP_REG_AA64_MASK | \ 2500 ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ 2501 ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ 2502 ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ 2503 ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ 2504 ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ 2505 ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) 2506 2507 /* Convert a full 64 bit KVM register ID to the truncated 32 bit 2508 * version used as a key for the coprocessor register hashtable 2509 */ 2510 static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) 2511 { 2512 uint32_t cpregid = kvmid; 2513 if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { 2514 cpregid |= CP_REG_AA64_MASK; 2515 } else { 2516 if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { 2517 cpregid |= (1 << 15); 2518 } 2519 2520 /* KVM is always non-secure so add the NS flag on AArch32 register 2521 * entries. 2522 */ 2523 cpregid |= 1 << CP_REG_NS_SHIFT; 2524 } 2525 return cpregid; 2526 } 2527 2528 /* Convert a truncated 32 bit hashtable key into the full 2529 * 64 bit KVM register ID. 2530 */ 2531 static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) 2532 { 2533 uint64_t kvmid; 2534 2535 if (cpregid & CP_REG_AA64_MASK) { 2536 kvmid = cpregid & ~CP_REG_AA64_MASK; 2537 kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; 2538 } else { 2539 kvmid = cpregid & ~(1 << 15); 2540 if (cpregid & (1 << 15)) { 2541 kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; 2542 } else { 2543 kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; 2544 } 2545 } 2546 return kvmid; 2547 } 2548 2549 /* ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a 2550 * special-behaviour cp reg and bits [11..8] indicate what behaviour 2551 * it has. Otherwise it is a simple cp reg, where CONST indicates that 2552 * TCG can assume the value to be constant (ie load at translate time) 2553 * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END 2554 * indicates that the TB should not be ended after a write to this register 2555 * (the default is that the TB ends after cp writes). OVERRIDE permits 2556 * a register definition to override a previous definition for the 2557 * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the 2558 * old must have the OVERRIDE bit set. 2559 * ALIAS indicates that this register is an alias view of some underlying 2560 * state which is also visible via another register, and that the other 2561 * register is handling migration and reset; registers marked ALIAS will not be 2562 * migrated but may have their state set by syncing of register state from KVM. 2563 * NO_RAW indicates that this register has no underlying state and does not 2564 * support raw access for state saving/loading; it will not be used for either 2565 * migration or KVM state synchronization. (Typically this is for "registers" 2566 * which are actually used as instructions for cache maintenance and so on.) 2567 * IO indicates that this register does I/O and therefore its accesses 2568 * need to be marked with gen_io_start() and also end the TB. In particular, 2569 * registers which implement clocks or timers require this. 2570 * RAISES_EXC is for when the read or write hook might raise an exception; 2571 * the generated code will synchronize the CPU state before calling the hook 2572 * so that it is safe for the hook to call raise_exception(). 2573 * NEWEL is for writes to registers that might change the exception 2574 * level - typically on older ARM chips. For those cases we need to 2575 * re-read the new el when recomputing the translation flags. 2576 */ 2577 #define ARM_CP_SPECIAL 0x0001 2578 #define ARM_CP_CONST 0x0002 2579 #define ARM_CP_64BIT 0x0004 2580 #define ARM_CP_SUPPRESS_TB_END 0x0008 2581 #define ARM_CP_OVERRIDE 0x0010 2582 #define ARM_CP_ALIAS 0x0020 2583 #define ARM_CP_IO 0x0040 2584 #define ARM_CP_NO_RAW 0x0080 2585 #define ARM_CP_NOP (ARM_CP_SPECIAL | 0x0100) 2586 #define ARM_CP_WFI (ARM_CP_SPECIAL | 0x0200) 2587 #define ARM_CP_NZCV (ARM_CP_SPECIAL | 0x0300) 2588 #define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | 0x0400) 2589 #define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | 0x0500) 2590 #define ARM_CP_DC_GVA (ARM_CP_SPECIAL | 0x0600) 2591 #define ARM_CP_DC_GZVA (ARM_CP_SPECIAL | 0x0700) 2592 #define ARM_LAST_SPECIAL ARM_CP_DC_GZVA 2593 #define ARM_CP_FPU 0x1000 2594 #define ARM_CP_SVE 0x2000 2595 #define ARM_CP_NO_GDB 0x4000 2596 #define ARM_CP_RAISES_EXC 0x8000 2597 #define ARM_CP_NEWEL 0x10000 2598 /* Used only as a terminator for ARMCPRegInfo lists */ 2599 #define ARM_CP_SENTINEL 0xfffff 2600 /* Mask of only the flag bits in a type field */ 2601 #define ARM_CP_FLAG_MASK 0x1f0ff 2602 2603 /* Valid values for ARMCPRegInfo state field, indicating which of 2604 * the AArch32 and AArch64 execution states this register is visible in. 2605 * If the reginfo doesn't explicitly specify then it is AArch32 only. 2606 * If the reginfo is declared to be visible in both states then a second 2607 * reginfo is synthesised for the AArch32 view of the AArch64 register, 2608 * such that the AArch32 view is the lower 32 bits of the AArch64 one. 2609 * Note that we rely on the values of these enums as we iterate through 2610 * the various states in some places. 2611 */ 2612 enum { 2613 ARM_CP_STATE_AA32 = 0, 2614 ARM_CP_STATE_AA64 = 1, 2615 ARM_CP_STATE_BOTH = 2, 2616 }; 2617 2618 /* ARM CP register secure state flags. These flags identify security state 2619 * attributes for a given CP register entry. 2620 * The existence of both or neither secure and non-secure flags indicates that 2621 * the register has both a secure and non-secure hash entry. A single one of 2622 * these flags causes the register to only be hashed for the specified 2623 * security state. 2624 * Although definitions may have any combination of the S/NS bits, each 2625 * registered entry will only have one to identify whether the entry is secure 2626 * or non-secure. 2627 */ 2628 enum { 2629 ARM_CP_SECSTATE_S = (1 << 0), /* bit[0]: Secure state register */ 2630 ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ 2631 }; 2632 2633 /* Return true if cptype is a valid type field. This is used to try to 2634 * catch errors where the sentinel has been accidentally left off the end 2635 * of a list of registers. 2636 */ 2637 static inline bool cptype_valid(int cptype) 2638 { 2639 return ((cptype & ~ARM_CP_FLAG_MASK) == 0) 2640 || ((cptype & ARM_CP_SPECIAL) && 2641 ((cptype & ~ARM_CP_FLAG_MASK) <= ARM_LAST_SPECIAL)); 2642 } 2643 2644 /* Access rights: 2645 * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM 2646 * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and 2647 * PL2 (hyp). The other level which has Read and Write bits is Secure PL1 2648 * (ie any of the privileged modes in Secure state, or Monitor mode). 2649 * If a register is accessible in one privilege level it's always accessible 2650 * in higher privilege levels too. Since "Secure PL1" also follows this rule 2651 * (ie anything visible in PL2 is visible in S-PL1, some things are only 2652 * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the 2653 * terminology a little and call this PL3. 2654 * In AArch64 things are somewhat simpler as the PLx bits line up exactly 2655 * with the ELx exception levels. 2656 * 2657 * If access permissions for a register are more complex than can be 2658 * described with these bits, then use a laxer set of restrictions, and 2659 * do the more restrictive/complex check inside a helper function. 2660 */ 2661 #define PL3_R 0x80 2662 #define PL3_W 0x40 2663 #define PL2_R (0x20 | PL3_R) 2664 #define PL2_W (0x10 | PL3_W) 2665 #define PL1_R (0x08 | PL2_R) 2666 #define PL1_W (0x04 | PL2_W) 2667 #define PL0_R (0x02 | PL1_R) 2668 #define PL0_W (0x01 | PL1_W) 2669 2670 /* 2671 * For user-mode some registers are accessible to EL0 via a kernel 2672 * trap-and-emulate ABI. In this case we define the read permissions 2673 * as actually being PL0_R. However some bits of any given register 2674 * may still be masked. 2675 */ 2676 #ifdef CONFIG_USER_ONLY 2677 #define PL0U_R PL0_R 2678 #else 2679 #define PL0U_R PL1_R 2680 #endif 2681 2682 #define PL3_RW (PL3_R | PL3_W) 2683 #define PL2_RW (PL2_R | PL2_W) 2684 #define PL1_RW (PL1_R | PL1_W) 2685 #define PL0_RW (PL0_R | PL0_W) 2686 2687 /* Return the highest implemented Exception Level */ 2688 static inline int arm_highest_el(CPUARMState *env) 2689 { 2690 if (arm_feature(env, ARM_FEATURE_EL3)) { 2691 return 3; 2692 } 2693 if (arm_feature(env, ARM_FEATURE_EL2)) { 2694 return 2; 2695 } 2696 return 1; 2697 } 2698 2699 /* Return true if a v7M CPU is in Handler mode */ 2700 static inline bool arm_v7m_is_handler_mode(CPUARMState *env) 2701 { 2702 return env->v7m.exception != 0; 2703 } 2704 2705 /* Return the current Exception Level (as per ARMv8; note that this differs 2706 * from the ARMv7 Privilege Level). 2707 */ 2708 static inline int arm_current_el(CPUARMState *env) 2709 { 2710 if (arm_feature(env, ARM_FEATURE_M)) { 2711 return arm_v7m_is_handler_mode(env) || 2712 !(env->v7m.control[env->v7m.secure] & 1); 2713 } 2714 2715 if (is_a64(env)) { 2716 return extract32(env->pstate, 2, 2); 2717 } 2718 2719 switch (env->uncached_cpsr & 0x1f) { 2720 case ARM_CPU_MODE_USR: 2721 return 0; 2722 case ARM_CPU_MODE_HYP: 2723 return 2; 2724 case ARM_CPU_MODE_MON: 2725 return 3; 2726 default: 2727 if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { 2728 /* If EL3 is 32-bit then all secure privileged modes run in 2729 * EL3 2730 */ 2731 return 3; 2732 } 2733 2734 return 1; 2735 } 2736 } 2737 2738 typedef struct ARMCPRegInfo ARMCPRegInfo; 2739 2740 typedef enum CPAccessResult { 2741 /* Access is permitted */ 2742 CP_ACCESS_OK = 0, 2743 /* Access fails due to a configurable trap or enable which would 2744 * result in a categorized exception syndrome giving information about 2745 * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, 2746 * 0xc or 0x18). The exception is taken to the usual target EL (EL1 or 2747 * PL1 if in EL0, otherwise to the current EL). 2748 */ 2749 CP_ACCESS_TRAP = 1, 2750 /* Access fails and results in an exception syndrome 0x0 ("uncategorized"). 2751 * Note that this is not a catch-all case -- the set of cases which may 2752 * result in this failure is specifically defined by the architecture. 2753 */ 2754 CP_ACCESS_TRAP_UNCATEGORIZED = 2, 2755 /* As CP_ACCESS_TRAP, but for traps directly to EL2 or EL3 */ 2756 CP_ACCESS_TRAP_EL2 = 3, 2757 CP_ACCESS_TRAP_EL3 = 4, 2758 /* As CP_ACCESS_UNCATEGORIZED, but for traps directly to EL2 or EL3 */ 2759 CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = 5, 2760 CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = 6, 2761 /* Access fails and results in an exception syndrome for an FP access, 2762 * trapped directly to EL2 or EL3 2763 */ 2764 CP_ACCESS_TRAP_FP_EL2 = 7, 2765 CP_ACCESS_TRAP_FP_EL3 = 8, 2766 } CPAccessResult; 2767 2768 /* Access functions for coprocessor registers. These cannot fail and 2769 * may not raise exceptions. 2770 */ 2771 typedef uint64_t CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque); 2772 typedef void CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque, 2773 uint64_t value); 2774 /* Access permission check functions for coprocessor registers. */ 2775 typedef CPAccessResult CPAccessFn(CPUARMState *env, 2776 const ARMCPRegInfo *opaque, 2777 bool isread); 2778 /* Hook function for register reset */ 2779 typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque); 2780 2781 #define CP_ANY 0xff 2782 2783 /* Definition of an ARM coprocessor register */ 2784 struct ARMCPRegInfo { 2785 /* Name of register (useful mainly for debugging, need not be unique) */ 2786 const char *name; 2787 /* Location of register: coprocessor number and (crn,crm,opc1,opc2) 2788 * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a 2789 * 'wildcard' field -- any value of that field in the MRC/MCR insn 2790 * will be decoded to this register. The register read and write 2791 * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2 2792 * used by the program, so it is possible to register a wildcard and 2793 * then behave differently on read/write if necessary. 2794 * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 2795 * must both be zero. 2796 * For AArch64-visible registers, opc0 is also used. 2797 * Since there are no "coprocessors" in AArch64, cp is purely used as a 2798 * way to distinguish (for KVM's benefit) guest-visible system registers 2799 * from demuxed ones provided to preserve the "no side effects on 2800 * KVM register read/write from QEMU" semantics. cp==0x13 is guest 2801 * visible (to match KVM's encoding); cp==0 will be converted to 2802 * cp==0x13 when the ARMCPRegInfo is registered, for convenience. 2803 */ 2804 uint8_t cp; 2805 uint8_t crn; 2806 uint8_t crm; 2807 uint8_t opc0; 2808 uint8_t opc1; 2809 uint8_t opc2; 2810 /* Execution state in which this register is visible: ARM_CP_STATE_* */ 2811 int state; 2812 /* Register type: ARM_CP_* bits/values */ 2813 int type; 2814 /* Access rights: PL*_[RW] */ 2815 int access; 2816 /* Security state: ARM_CP_SECSTATE_* bits/values */ 2817 int secure; 2818 /* The opaque pointer passed to define_arm_cp_regs_with_opaque() when 2819 * this register was defined: can be used to hand data through to the 2820 * register read/write functions, since they are passed the ARMCPRegInfo*. 2821 */ 2822 void *opaque; 2823 /* Value of this register, if it is ARM_CP_CONST. Otherwise, if 2824 * fieldoffset is non-zero, the reset value of the register. 2825 */ 2826 uint64_t resetvalue; 2827 /* Offset of the field in CPUARMState for this register. 2828 * 2829 * This is not needed if either: 2830 * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs 2831 * 2. both readfn and writefn are specified 2832 */ 2833 ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */ 2834 2835 /* Offsets of the secure and non-secure fields in CPUARMState for the 2836 * register if it is banked. These fields are only used during the static 2837 * registration of a register. During hashing the bank associated 2838 * with a given security state is copied to fieldoffset which is used from 2839 * there on out. 2840 * 2841 * It is expected that register definitions use either fieldoffset or 2842 * bank_fieldoffsets in the definition but not both. It is also expected 2843 * that both bank offsets are set when defining a banked register. This 2844 * use indicates that a register is banked. 2845 */ 2846 ptrdiff_t bank_fieldoffsets[2]; 2847 2848 /* Function for making any access checks for this register in addition to 2849 * those specified by the 'access' permissions bits. If NULL, no extra 2850 * checks required. The access check is performed at runtime, not at 2851 * translate time. 2852 */ 2853 CPAccessFn *accessfn; 2854 /* Function for handling reads of this register. If NULL, then reads 2855 * will be done by loading from the offset into CPUARMState specified 2856 * by fieldoffset. 2857 */ 2858 CPReadFn *readfn; 2859 /* Function for handling writes of this register. If NULL, then writes 2860 * will be done by writing to the offset into CPUARMState specified 2861 * by fieldoffset. 2862 */ 2863 CPWriteFn *writefn; 2864 /* Function for doing a "raw" read; used when we need to copy 2865 * coprocessor state to the kernel for KVM or out for 2866 * migration. This only needs to be provided if there is also a 2867 * readfn and it has side effects (for instance clear-on-read bits). 2868 */ 2869 CPReadFn *raw_readfn; 2870 /* Function for doing a "raw" write; used when we need to copy KVM 2871 * kernel coprocessor state into userspace, or for inbound 2872 * migration. This only needs to be provided if there is also a 2873 * writefn and it masks out "unwritable" bits or has write-one-to-clear 2874 * or similar behaviour. 2875 */ 2876 CPWriteFn *raw_writefn; 2877 /* Function for resetting the register. If NULL, then reset will be done 2878 * by writing resetvalue to the field specified in fieldoffset. If 2879 * fieldoffset is 0 then no reset will be done. 2880 */ 2881 CPResetFn *resetfn; 2882 2883 /* 2884 * "Original" writefn and readfn. 2885 * For ARMv8.1-VHE register aliases, we overwrite the read/write 2886 * accessor functions of various EL1/EL0 to perform the runtime 2887 * check for which sysreg should actually be modified, and then 2888 * forwards the operation. Before overwriting the accessors, 2889 * the original function is copied here, so that accesses that 2890 * really do go to the EL1/EL0 version proceed normally. 2891 * (The corresponding EL2 register is linked via opaque.) 2892 */ 2893 CPReadFn *orig_readfn; 2894 CPWriteFn *orig_writefn; 2895 }; 2896 2897 /* Macros which are lvalues for the field in CPUARMState for the 2898 * ARMCPRegInfo *ri. 2899 */ 2900 #define CPREG_FIELD32(env, ri) \ 2901 (*(uint32_t *)((char *)(env) + (ri)->fieldoffset)) 2902 #define CPREG_FIELD64(env, ri) \ 2903 (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) 2904 2905 #define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL } 2906 2907 void define_arm_cp_regs_with_opaque(ARMCPU *cpu, 2908 const ARMCPRegInfo *regs, void *opaque); 2909 void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, 2910 const ARMCPRegInfo *regs, void *opaque); 2911 static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs) 2912 { 2913 define_arm_cp_regs_with_opaque(cpu, regs, 0); 2914 } 2915 static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) 2916 { 2917 define_one_arm_cp_reg_with_opaque(cpu, regs, 0); 2918 } 2919 const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp); 2920 2921 /* 2922 * Definition of an ARM co-processor register as viewed from 2923 * userspace. This is used for presenting sanitised versions of 2924 * registers to userspace when emulating the Linux AArch64 CPU 2925 * ID/feature ABI (advertised as HWCAP_CPUID). 2926 */ 2927 typedef struct ARMCPRegUserSpaceInfo { 2928 /* Name of register */ 2929 const char *name; 2930 2931 /* Is the name actually a glob pattern */ 2932 bool is_glob; 2933 2934 /* Only some bits are exported to user space */ 2935 uint64_t exported_bits; 2936 2937 /* Fixed bits are applied after the mask */ 2938 uint64_t fixed_bits; 2939 } ARMCPRegUserSpaceInfo; 2940 2941 #define REGUSERINFO_SENTINEL { .name = NULL } 2942 2943 void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods); 2944 2945 /* CPWriteFn that can be used to implement writes-ignored behaviour */ 2946 void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, 2947 uint64_t value); 2948 /* CPReadFn that can be used for read-as-zero behaviour */ 2949 uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri); 2950 2951 /* CPResetFn that does nothing, for use if no reset is required even 2952 * if fieldoffset is non zero. 2953 */ 2954 void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque); 2955 2956 /* Return true if this reginfo struct's field in the cpu state struct 2957 * is 64 bits wide. 2958 */ 2959 static inline bool cpreg_field_is_64bit(const ARMCPRegInfo *ri) 2960 { 2961 return (ri->state == ARM_CP_STATE_AA64) || (ri->type & ARM_CP_64BIT); 2962 } 2963 2964 static inline bool cp_access_ok(int current_el, 2965 const ARMCPRegInfo *ri, int isread) 2966 { 2967 return (ri->access >> ((current_el * 2) + isread)) & 1; 2968 } 2969 2970 /* Raw read of a coprocessor register (as needed for migration, etc) */ 2971 uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri); 2972 2973 /** 2974 * write_list_to_cpustate 2975 * @cpu: ARMCPU 2976 * 2977 * For each register listed in the ARMCPU cpreg_indexes list, write 2978 * its value from the cpreg_values list into the ARMCPUState structure. 2979 * This updates TCG's working data structures from KVM data or 2980 * from incoming migration state. 2981 * 2982 * Returns: true if all register values were updated correctly, 2983 * false if some register was unknown or could not be written. 2984 * Note that we do not stop early on failure -- we will attempt 2985 * writing all registers in the list. 2986 */ 2987 bool write_list_to_cpustate(ARMCPU *cpu); 2988 2989 /** 2990 * write_cpustate_to_list: 2991 * @cpu: ARMCPU 2992 * @kvm_sync: true if this is for syncing back to KVM 2993 * 2994 * For each register listed in the ARMCPU cpreg_indexes list, write 2995 * its value from the ARMCPUState structure into the cpreg_values list. 2996 * This is used to copy info from TCG's working data structures into 2997 * KVM or for outbound migration. 2998 * 2999 * @kvm_sync is true if we are doing this in order to sync the 3000 * register state back to KVM. In this case we will only update 3001 * values in the list if the previous list->cpustate sync actually 3002 * successfully wrote the CPU state. Otherwise we will keep the value 3003 * that is in the list. 3004 * 3005 * Returns: true if all register values were read correctly, 3006 * false if some register was unknown or could not be read. 3007 * Note that we do not stop early on failure -- we will attempt 3008 * reading all registers in the list. 3009 */ 3010 bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync); 3011 3012 #define ARM_CPUID_TI915T 0x54029152 3013 #define ARM_CPUID_TI925T 0x54029252 3014 3015 #define ARM_CPU_TYPE_SUFFIX "-" TYPE_ARM_CPU 3016 #define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX) 3017 #define CPU_RESOLVING_TYPE TYPE_ARM_CPU 3018 3019 #define cpu_signal_handler cpu_arm_signal_handler 3020 #define cpu_list arm_cpu_list 3021 3022 /* ARM has the following "translation regimes" (as the ARM ARM calls them): 3023 * 3024 * If EL3 is 64-bit: 3025 * + NonSecure EL1 & 0 stage 1 3026 * + NonSecure EL1 & 0 stage 2 3027 * + NonSecure EL2 3028 * + NonSecure EL2 & 0 (ARMv8.1-VHE) 3029 * + Secure EL1 & 0 3030 * + Secure EL3 3031 * If EL3 is 32-bit: 3032 * + NonSecure PL1 & 0 stage 1 3033 * + NonSecure PL1 & 0 stage 2 3034 * + NonSecure PL2 3035 * + Secure PL0 3036 * + Secure PL1 3037 * (reminder: for 32 bit EL3, Secure PL1 is *EL3*, not EL1.) 3038 * 3039 * For QEMU, an mmu_idx is not quite the same as a translation regime because: 3040 * 1. we need to split the "EL1 & 0" and "EL2 & 0" regimes into two mmu_idxes, 3041 * because they may differ in access permissions even if the VA->PA map is 3042 * the same 3043 * 2. we want to cache in our TLB the full VA->IPA->PA lookup for a stage 1+2 3044 * translation, which means that we have one mmu_idx that deals with two 3045 * concatenated translation regimes [this sort of combined s1+2 TLB is 3046 * architecturally permitted] 3047 * 3. we don't need to allocate an mmu_idx to translations that we won't be 3048 * handling via the TLB. The only way to do a stage 1 translation without 3049 * the immediate stage 2 translation is via the ATS or AT system insns, 3050 * which can be slow-pathed and always do a page table walk. 3051 * The only use of stage 2 translations is either as part of an s1+2 3052 * lookup or when loading the descriptors during a stage 1 page table walk, 3053 * and in both those cases we don't use the TLB. 3054 * 4. we can also safely fold together the "32 bit EL3" and "64 bit EL3" 3055 * translation regimes, because they map reasonably well to each other 3056 * and they can't both be active at the same time. 3057 * 5. we want to be able to use the TLB for accesses done as part of a 3058 * stage1 page table walk, rather than having to walk the stage2 page 3059 * table over and over. 3060 * 6. we need separate EL1/EL2 mmu_idx for handling the Privileged Access 3061 * Never (PAN) bit within PSTATE. 3062 * 3063 * This gives us the following list of cases: 3064 * 3065 * NS EL0 EL1&0 stage 1+2 (aka NS PL0) 3066 * NS EL1 EL1&0 stage 1+2 (aka NS PL1) 3067 * NS EL1 EL1&0 stage 1+2 +PAN 3068 * NS EL0 EL2&0 3069 * NS EL2 EL2&0 3070 * NS EL2 EL2&0 +PAN 3071 * NS EL2 (aka NS PL2) 3072 * S EL0 EL1&0 (aka S PL0) 3073 * S EL1 EL1&0 (not used if EL3 is 32 bit) 3074 * S EL1 EL1&0 +PAN 3075 * S EL3 (aka S PL1) 3076 * 3077 * for a total of 11 different mmu_idx. 3078 * 3079 * R profile CPUs have an MPU, but can use the same set of MMU indexes 3080 * as A profile. They only need to distinguish NS EL0 and NS EL1 (and 3081 * NS EL2 if we ever model a Cortex-R52). 3082 * 3083 * M profile CPUs are rather different as they do not have a true MMU. 3084 * They have the following different MMU indexes: 3085 * User 3086 * Privileged 3087 * User, execution priority negative (ie the MPU HFNMIENA bit may apply) 3088 * Privileged, execution priority negative (ditto) 3089 * If the CPU supports the v8M Security Extension then there are also: 3090 * Secure User 3091 * Secure Privileged 3092 * Secure User, execution priority negative 3093 * Secure Privileged, execution priority negative 3094 * 3095 * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code 3096 * are not quite the same -- different CPU types (most notably M profile 3097 * vs A/R profile) would like to use MMU indexes with different semantics, 3098 * but since we don't ever need to use all of those in a single CPU we 3099 * can avoid having to set NB_MMU_MODES to "total number of A profile MMU 3100 * modes + total number of M profile MMU modes". The lower bits of 3101 * ARMMMUIdx are the core TLB mmu index, and the higher bits are always 3102 * the same for any particular CPU. 3103 * Variables of type ARMMUIdx are always full values, and the core 3104 * index values are in variables of type 'int'. 3105 * 3106 * Our enumeration includes at the end some entries which are not "true" 3107 * mmu_idx values in that they don't have corresponding TLBs and are only 3108 * valid for doing slow path page table walks. 3109 * 3110 * The constant names here are patterned after the general style of the names 3111 * of the AT/ATS operations. 3112 * The values used are carefully arranged to make mmu_idx => EL lookup easy. 3113 * For M profile we arrange them to have a bit for priv, a bit for negpri 3114 * and a bit for secure. 3115 */ 3116 #define ARM_MMU_IDX_A 0x10 /* A profile */ 3117 #define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ 3118 #define ARM_MMU_IDX_M 0x40 /* M profile */ 3119 3120 /* Meanings of the bits for A profile mmu idx values */ 3121 #define ARM_MMU_IDX_A_NS 0x8 3122 3123 /* Meanings of the bits for M profile mmu idx values */ 3124 #define ARM_MMU_IDX_M_PRIV 0x1 3125 #define ARM_MMU_IDX_M_NEGPRI 0x2 3126 #define ARM_MMU_IDX_M_S 0x4 /* Secure */ 3127 3128 #define ARM_MMU_IDX_TYPE_MASK \ 3129 (ARM_MMU_IDX_A | ARM_MMU_IDX_M | ARM_MMU_IDX_NOTLB) 3130 #define ARM_MMU_IDX_COREIDX_MASK 0xf 3131 3132 typedef enum ARMMMUIdx { 3133 /* 3134 * A-profile. 3135 */ 3136 ARMMMUIdx_SE10_0 = 0 | ARM_MMU_IDX_A, 3137 ARMMMUIdx_SE20_0 = 1 | ARM_MMU_IDX_A, 3138 ARMMMUIdx_SE10_1 = 2 | ARM_MMU_IDX_A, 3139 ARMMMUIdx_SE20_2 = 3 | ARM_MMU_IDX_A, 3140 ARMMMUIdx_SE10_1_PAN = 4 | ARM_MMU_IDX_A, 3141 ARMMMUIdx_SE20_2_PAN = 5 | ARM_MMU_IDX_A, 3142 ARMMMUIdx_SE2 = 6 | ARM_MMU_IDX_A, 3143 ARMMMUIdx_SE3 = 7 | ARM_MMU_IDX_A, 3144 3145 ARMMMUIdx_E10_0 = ARMMMUIdx_SE10_0 | ARM_MMU_IDX_A_NS, 3146 ARMMMUIdx_E20_0 = ARMMMUIdx_SE20_0 | ARM_MMU_IDX_A_NS, 3147 ARMMMUIdx_E10_1 = ARMMMUIdx_SE10_1 | ARM_MMU_IDX_A_NS, 3148 ARMMMUIdx_E20_2 = ARMMMUIdx_SE20_2 | ARM_MMU_IDX_A_NS, 3149 ARMMMUIdx_E10_1_PAN = ARMMMUIdx_SE10_1_PAN | ARM_MMU_IDX_A_NS, 3150 ARMMMUIdx_E20_2_PAN = ARMMMUIdx_SE20_2_PAN | ARM_MMU_IDX_A_NS, 3151 ARMMMUIdx_E2 = ARMMMUIdx_SE2 | ARM_MMU_IDX_A_NS, 3152 3153 /* 3154 * These are not allocated TLBs and are used only for AT system 3155 * instructions or for the first stage of an S12 page table walk. 3156 */ 3157 ARMMMUIdx_Stage1_E0 = 0 | ARM_MMU_IDX_NOTLB, 3158 ARMMMUIdx_Stage1_E1 = 1 | ARM_MMU_IDX_NOTLB, 3159 ARMMMUIdx_Stage1_E1_PAN = 2 | ARM_MMU_IDX_NOTLB, 3160 ARMMMUIdx_Stage1_SE0 = 3 | ARM_MMU_IDX_NOTLB, 3161 ARMMMUIdx_Stage1_SE1 = 4 | ARM_MMU_IDX_NOTLB, 3162 ARMMMUIdx_Stage1_SE1_PAN = 5 | ARM_MMU_IDX_NOTLB, 3163 /* 3164 * Not allocated a TLB: used only for second stage of an S12 page 3165 * table walk, or for descriptor loads during first stage of an S1 3166 * page table walk. Note that if we ever want to have a TLB for this 3167 * then various TLB flush insns which currently are no-ops or flush 3168 * only stage 1 MMU indexes will need to change to flush stage 2. 3169 */ 3170 ARMMMUIdx_Stage2 = 6 | ARM_MMU_IDX_NOTLB, 3171 ARMMMUIdx_Stage2_S = 7 | ARM_MMU_IDX_NOTLB, 3172 3173 /* 3174 * M-profile. 3175 */ 3176 ARMMMUIdx_MUser = ARM_MMU_IDX_M, 3177 ARMMMUIdx_MPriv = ARM_MMU_IDX_M | ARM_MMU_IDX_M_PRIV, 3178 ARMMMUIdx_MUserNegPri = ARMMMUIdx_MUser | ARM_MMU_IDX_M_NEGPRI, 3179 ARMMMUIdx_MPrivNegPri = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_NEGPRI, 3180 ARMMMUIdx_MSUser = ARMMMUIdx_MUser | ARM_MMU_IDX_M_S, 3181 ARMMMUIdx_MSPriv = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_S, 3182 ARMMMUIdx_MSUserNegPri = ARMMMUIdx_MUserNegPri | ARM_MMU_IDX_M_S, 3183 ARMMMUIdx_MSPrivNegPri = ARMMMUIdx_MPrivNegPri | ARM_MMU_IDX_M_S, 3184 } ARMMMUIdx; 3185 3186 /* 3187 * Bit macros for the core-mmu-index values for each index, 3188 * for use when calling tlb_flush_by_mmuidx() and friends. 3189 */ 3190 #define TO_CORE_BIT(NAME) \ 3191 ARMMMUIdxBit_##NAME = 1 << (ARMMMUIdx_##NAME & ARM_MMU_IDX_COREIDX_MASK) 3192 3193 typedef enum ARMMMUIdxBit { 3194 TO_CORE_BIT(E10_0), 3195 TO_CORE_BIT(E20_0), 3196 TO_CORE_BIT(E10_1), 3197 TO_CORE_BIT(E10_1_PAN), 3198 TO_CORE_BIT(E2), 3199 TO_CORE_BIT(E20_2), 3200 TO_CORE_BIT(E20_2_PAN), 3201 TO_CORE_BIT(SE10_0), 3202 TO_CORE_BIT(SE20_0), 3203 TO_CORE_BIT(SE10_1), 3204 TO_CORE_BIT(SE20_2), 3205 TO_CORE_BIT(SE10_1_PAN), 3206 TO_CORE_BIT(SE20_2_PAN), 3207 TO_CORE_BIT(SE2), 3208 TO_CORE_BIT(SE3), 3209 3210 TO_CORE_BIT(MUser), 3211 TO_CORE_BIT(MPriv), 3212 TO_CORE_BIT(MUserNegPri), 3213 TO_CORE_BIT(MPrivNegPri), 3214 TO_CORE_BIT(MSUser), 3215 TO_CORE_BIT(MSPriv), 3216 TO_CORE_BIT(MSUserNegPri), 3217 TO_CORE_BIT(MSPrivNegPri), 3218 } ARMMMUIdxBit; 3219 3220 #undef TO_CORE_BIT 3221 3222 #define MMU_USER_IDX 0 3223 3224 /* Indexes used when registering address spaces with cpu_address_space_init */ 3225 typedef enum ARMASIdx { 3226 ARMASIdx_NS = 0, 3227 ARMASIdx_S = 1, 3228 ARMASIdx_TagNS = 2, 3229 ARMASIdx_TagS = 3, 3230 } ARMASIdx; 3231 3232 /* Return the Exception Level targeted by debug exceptions. */ 3233 static inline int arm_debug_target_el(CPUARMState *env) 3234 { 3235 bool secure = arm_is_secure(env); 3236 bool route_to_el2 = false; 3237 3238 if (arm_is_el2_enabled(env)) { 3239 route_to_el2 = env->cp15.hcr_el2 & HCR_TGE || 3240 env->cp15.mdcr_el2 & MDCR_TDE; 3241 } 3242 3243 if (route_to_el2) { 3244 return 2; 3245 } else if (arm_feature(env, ARM_FEATURE_EL3) && 3246 !arm_el_is_aa64(env, 3) && secure) { 3247 return 3; 3248 } else { 3249 return 1; 3250 } 3251 } 3252 3253 static inline bool arm_v7m_csselr_razwi(ARMCPU *cpu) 3254 { 3255 /* If all the CLIDR.Ctypem bits are 0 there are no caches, and 3256 * CSSELR is RAZ/WI. 3257 */ 3258 return (cpu->clidr & R_V7M_CLIDR_CTYPE_ALL_MASK) != 0; 3259 } 3260 3261 /* See AArch64.GenerateDebugExceptionsFrom() in ARM ARM pseudocode */ 3262 static inline bool aa64_generate_debug_exceptions(CPUARMState *env) 3263 { 3264 int cur_el = arm_current_el(env); 3265 int debug_el; 3266 3267 if (cur_el == 3) { 3268 return false; 3269 } 3270 3271 /* MDCR_EL3.SDD disables debug events from Secure state */ 3272 if (arm_is_secure_below_el3(env) 3273 && extract32(env->cp15.mdcr_el3, 16, 1)) { 3274 return false; 3275 } 3276 3277 /* 3278 * Same EL to same EL debug exceptions need MDSCR_KDE enabled 3279 * while not masking the (D)ebug bit in DAIF. 3280 */ 3281 debug_el = arm_debug_target_el(env); 3282 3283 if (cur_el == debug_el) { 3284 return extract32(env->cp15.mdscr_el1, 13, 1) 3285 && !(env->daif & PSTATE_D); 3286 } 3287 3288 /* Otherwise the debug target needs to be a higher EL */ 3289 return debug_el > cur_el; 3290 } 3291 3292 static inline bool aa32_generate_debug_exceptions(CPUARMState *env) 3293 { 3294 int el = arm_current_el(env); 3295 3296 if (el == 0 && arm_el_is_aa64(env, 1)) { 3297 return aa64_generate_debug_exceptions(env); 3298 } 3299 3300 if (arm_is_secure(env)) { 3301 int spd; 3302 3303 if (el == 0 && (env->cp15.sder & 1)) { 3304 /* SDER.SUIDEN means debug exceptions from Secure EL0 3305 * are always enabled. Otherwise they are controlled by 3306 * SDCR.SPD like those from other Secure ELs. 3307 */ 3308 return true; 3309 } 3310 3311 spd = extract32(env->cp15.mdcr_el3, 14, 2); 3312 switch (spd) { 3313 case 1: 3314 /* SPD == 0b01 is reserved, but behaves as 0b00. */ 3315 case 0: 3316 /* For 0b00 we return true if external secure invasive debug 3317 * is enabled. On real hardware this is controlled by external 3318 * signals to the core. QEMU always permits debug, and behaves 3319 * as if DBGEN, SPIDEN, NIDEN and SPNIDEN are all tied high. 3320 */ 3321 return true; 3322 case 2: 3323 return false; 3324 case 3: 3325 return true; 3326 } 3327 } 3328 3329 return el != 2; 3330 } 3331 3332 /* Return true if debugging exceptions are currently enabled. 3333 * This corresponds to what in ARM ARM pseudocode would be 3334 * if UsingAArch32() then 3335 * return AArch32.GenerateDebugExceptions() 3336 * else 3337 * return AArch64.GenerateDebugExceptions() 3338 * We choose to push the if() down into this function for clarity, 3339 * since the pseudocode has it at all callsites except for the one in 3340 * CheckSoftwareStep(), where it is elided because both branches would 3341 * always return the same value. 3342 */ 3343 static inline bool arm_generate_debug_exceptions(CPUARMState *env) 3344 { 3345 if (env->aarch64) { 3346 return aa64_generate_debug_exceptions(env); 3347 } else { 3348 return aa32_generate_debug_exceptions(env); 3349 } 3350 } 3351 3352 /* Is single-stepping active? (Note that the "is EL_D AArch64?" check 3353 * implicitly means this always returns false in pre-v8 CPUs.) 3354 */ 3355 static inline bool arm_singlestep_active(CPUARMState *env) 3356 { 3357 return extract32(env->cp15.mdscr_el1, 0, 1) 3358 && arm_el_is_aa64(env, arm_debug_target_el(env)) 3359 && arm_generate_debug_exceptions(env); 3360 } 3361 3362 static inline bool arm_sctlr_b(CPUARMState *env) 3363 { 3364 return 3365 /* We need not implement SCTLR.ITD in user-mode emulation, so 3366 * let linux-user ignore the fact that it conflicts with SCTLR_B. 3367 * This lets people run BE32 binaries with "-cpu any". 3368 */ 3369 #ifndef CONFIG_USER_ONLY 3370 !arm_feature(env, ARM_FEATURE_V7) && 3371 #endif 3372 (env->cp15.sctlr_el[1] & SCTLR_B) != 0; 3373 } 3374 3375 uint64_t arm_sctlr(CPUARMState *env, int el); 3376 3377 static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env, 3378 bool sctlr_b) 3379 { 3380 #ifdef CONFIG_USER_ONLY 3381 /* 3382 * In system mode, BE32 is modelled in line with the 3383 * architecture (as word-invariant big-endianness), where loads 3384 * and stores are done little endian but from addresses which 3385 * are adjusted by XORing with the appropriate constant. So the 3386 * endianness to use for the raw data access is not affected by 3387 * SCTLR.B. 3388 * In user mode, however, we model BE32 as byte-invariant 3389 * big-endianness (because user-only code cannot tell the 3390 * difference), and so we need to use a data access endianness 3391 * that depends on SCTLR.B. 3392 */ 3393 if (sctlr_b) { 3394 return true; 3395 } 3396 #endif 3397 /* In 32bit endianness is determined by looking at CPSR's E bit */ 3398 return env->uncached_cpsr & CPSR_E; 3399 } 3400 3401 static inline bool arm_cpu_data_is_big_endian_a64(int el, uint64_t sctlr) 3402 { 3403 return sctlr & (el ? SCTLR_EE : SCTLR_E0E); 3404 } 3405 3406 /* Return true if the processor is in big-endian mode. */ 3407 static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) 3408 { 3409 if (!is_a64(env)) { 3410 return arm_cpu_data_is_big_endian_a32(env, arm_sctlr_b(env)); 3411 } else { 3412 int cur_el = arm_current_el(env); 3413 uint64_t sctlr = arm_sctlr(env, cur_el); 3414 return arm_cpu_data_is_big_endian_a64(cur_el, sctlr); 3415 } 3416 } 3417 3418 typedef CPUARMState CPUArchState; 3419 typedef ARMCPU ArchCPU; 3420 3421 #include "exec/cpu-all.h" 3422 3423 /* 3424 * We have more than 32-bits worth of state per TB, so we split the data 3425 * between tb->flags and tb->cs_base, which is otherwise unused for ARM. 3426 * We collect these two parts in CPUARMTBFlags where they are named 3427 * flags and flags2 respectively. 3428 * 3429 * The flags that are shared between all execution modes, TBFLAG_ANY, 3430 * are stored in flags. The flags that are specific to a given mode 3431 * are stores in flags2. Since cs_base is sized on the configured 3432 * address size, flags2 always has 64-bits for A64, and a minimum of 3433 * 32-bits for A32 and M32. 3434 * 3435 * The bits for 32-bit A-profile and M-profile partially overlap: 3436 * 3437 * 31 23 11 10 0 3438 * +-------------+----------+----------------+ 3439 * | | | TBFLAG_A32 | 3440 * | TBFLAG_AM32 | +-----+----------+ 3441 * | | |TBFLAG_M32| 3442 * +-------------+----------------+----------+ 3443 * 31 23 5 4 0 3444 * 3445 * Unless otherwise noted, these bits are cached in env->hflags. 3446 */ 3447 FIELD(TBFLAG_ANY, AARCH64_STATE, 0, 1) 3448 FIELD(TBFLAG_ANY, SS_ACTIVE, 1, 1) 3449 FIELD(TBFLAG_ANY, PSTATE__SS, 2, 1) /* Not cached. */ 3450 FIELD(TBFLAG_ANY, BE_DATA, 3, 1) 3451 FIELD(TBFLAG_ANY, MMUIDX, 4, 4) 3452 /* Target EL if we take a floating-point-disabled exception */ 3453 FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2) 3454 /* For A-profile only, target EL for debug exceptions. */ 3455 FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 10, 2) 3456 /* Memory operations require alignment: SCTLR_ELx.A or CCR.UNALIGN_TRP */ 3457 FIELD(TBFLAG_ANY, ALIGN_MEM, 12, 1) 3458 3459 /* 3460 * Bit usage when in AArch32 state, both A- and M-profile. 3461 */ 3462 FIELD(TBFLAG_AM32, CONDEXEC, 24, 8) /* Not cached. */ 3463 FIELD(TBFLAG_AM32, THUMB, 23, 1) /* Not cached. */ 3464 3465 /* 3466 * Bit usage when in AArch32 state, for A-profile only. 3467 */ 3468 FIELD(TBFLAG_A32, VECLEN, 0, 3) /* Not cached. */ 3469 FIELD(TBFLAG_A32, VECSTRIDE, 3, 2) /* Not cached. */ 3470 /* 3471 * We store the bottom two bits of the CPAR as TB flags and handle 3472 * checks on the other bits at runtime. This shares the same bits as 3473 * VECSTRIDE, which is OK as no XScale CPU has VFP. 3474 * Not cached, because VECLEN+VECSTRIDE are not cached. 3475 */ 3476 FIELD(TBFLAG_A32, XSCALE_CPAR, 5, 2) 3477 FIELD(TBFLAG_A32, VFPEN, 7, 1) /* Partially cached, minus FPEXC. */ 3478 FIELD(TBFLAG_A32, SCTLR__B, 8, 1) /* Cannot overlap with SCTLR_B */ 3479 FIELD(TBFLAG_A32, HSTR_ACTIVE, 9, 1) 3480 /* 3481 * Indicates whether cp register reads and writes by guest code should access 3482 * the secure or nonsecure bank of banked registers; note that this is not 3483 * the same thing as the current security state of the processor! 3484 */ 3485 FIELD(TBFLAG_A32, NS, 10, 1) 3486 3487 /* 3488 * Bit usage when in AArch32 state, for M-profile only. 3489 */ 3490 /* Handler (ie not Thread) mode */ 3491 FIELD(TBFLAG_M32, HANDLER, 0, 1) 3492 /* Whether we should generate stack-limit checks */ 3493 FIELD(TBFLAG_M32, STACKCHECK, 1, 1) 3494 /* Set if FPCCR.LSPACT is set */ 3495 FIELD(TBFLAG_M32, LSPACT, 2, 1) /* Not cached. */ 3496 /* Set if we must create a new FP context */ 3497 FIELD(TBFLAG_M32, NEW_FP_CTXT_NEEDED, 3, 1) /* Not cached. */ 3498 /* Set if FPCCR.S does not match current security state */ 3499 FIELD(TBFLAG_M32, FPCCR_S_WRONG, 4, 1) /* Not cached. */ 3500 3501 /* 3502 * Bit usage when in AArch64 state 3503 */ 3504 FIELD(TBFLAG_A64, TBII, 0, 2) 3505 FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2) 3506 FIELD(TBFLAG_A64, ZCR_LEN, 4, 4) 3507 FIELD(TBFLAG_A64, PAUTH_ACTIVE, 8, 1) 3508 FIELD(TBFLAG_A64, BT, 9, 1) 3509 FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ 3510 FIELD(TBFLAG_A64, TBID, 12, 2) 3511 FIELD(TBFLAG_A64, UNPRIV, 14, 1) 3512 FIELD(TBFLAG_A64, ATA, 15, 1) 3513 FIELD(TBFLAG_A64, TCMA, 16, 2) 3514 FIELD(TBFLAG_A64, MTE_ACTIVE, 18, 1) 3515 FIELD(TBFLAG_A64, MTE0_ACTIVE, 19, 1) 3516 3517 /* 3518 * Helpers for using the above. 3519 */ 3520 #define DP_TBFLAG_ANY(DST, WHICH, VAL) \ 3521 (DST.flags = FIELD_DP32(DST.flags, TBFLAG_ANY, WHICH, VAL)) 3522 #define DP_TBFLAG_A64(DST, WHICH, VAL) \ 3523 (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_A64, WHICH, VAL)) 3524 #define DP_TBFLAG_A32(DST, WHICH, VAL) \ 3525 (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_A32, WHICH, VAL)) 3526 #define DP_TBFLAG_M32(DST, WHICH, VAL) \ 3527 (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_M32, WHICH, VAL)) 3528 #define DP_TBFLAG_AM32(DST, WHICH, VAL) \ 3529 (DST.flags2 = FIELD_DP32(DST.flags2, TBFLAG_AM32, WHICH, VAL)) 3530 3531 #define EX_TBFLAG_ANY(IN, WHICH) FIELD_EX32(IN.flags, TBFLAG_ANY, WHICH) 3532 #define EX_TBFLAG_A64(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_A64, WHICH) 3533 #define EX_TBFLAG_A32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_A32, WHICH) 3534 #define EX_TBFLAG_M32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_M32, WHICH) 3535 #define EX_TBFLAG_AM32(IN, WHICH) FIELD_EX32(IN.flags2, TBFLAG_AM32, WHICH) 3536 3537 /** 3538 * cpu_mmu_index: 3539 * @env: The cpu environment 3540 * @ifetch: True for code access, false for data access. 3541 * 3542 * Return the core mmu index for the current translation regime. 3543 * This function is used by generic TCG code paths. 3544 */ 3545 static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) 3546 { 3547 return EX_TBFLAG_ANY(env->hflags, MMUIDX); 3548 } 3549 3550 static inline bool bswap_code(bool sctlr_b) 3551 { 3552 #ifdef CONFIG_USER_ONLY 3553 /* BE8 (SCTLR.B = 0, TARGET_WORDS_BIGENDIAN = 1) is mixed endian. 3554 * The invalid combination SCTLR.B=1/CPSR.E=1/TARGET_WORDS_BIGENDIAN=0 3555 * would also end up as a mixed-endian mode with BE code, LE data. 3556 */ 3557 return 3558 #ifdef TARGET_WORDS_BIGENDIAN 3559 1 ^ 3560 #endif 3561 sctlr_b; 3562 #else 3563 /* All code access in ARM is little endian, and there are no loaders 3564 * doing swaps that need to be reversed 3565 */ 3566 return 0; 3567 #endif 3568 } 3569 3570 #ifdef CONFIG_USER_ONLY 3571 static inline bool arm_cpu_bswap_data(CPUARMState *env) 3572 { 3573 return 3574 #ifdef TARGET_WORDS_BIGENDIAN 3575 1 ^ 3576 #endif 3577 arm_cpu_data_is_big_endian(env); 3578 } 3579 #endif 3580 3581 void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, 3582 target_ulong *cs_base, uint32_t *flags); 3583 3584 enum { 3585 QEMU_PSCI_CONDUIT_DISABLED = 0, 3586 QEMU_PSCI_CONDUIT_SMC = 1, 3587 QEMU_PSCI_CONDUIT_HVC = 2, 3588 }; 3589 3590 #ifndef CONFIG_USER_ONLY 3591 /* Return the address space index to use for a memory access */ 3592 static inline int arm_asidx_from_attrs(CPUState *cs, MemTxAttrs attrs) 3593 { 3594 return attrs.secure ? ARMASIdx_S : ARMASIdx_NS; 3595 } 3596 3597 /* Return the AddressSpace to use for a memory access 3598 * (which depends on whether the access is S or NS, and whether 3599 * the board gave us a separate AddressSpace for S accesses). 3600 */ 3601 static inline AddressSpace *arm_addressspace(CPUState *cs, MemTxAttrs attrs) 3602 { 3603 return cpu_get_address_space(cs, arm_asidx_from_attrs(cs, attrs)); 3604 } 3605 #endif 3606 3607 /** 3608 * arm_register_pre_el_change_hook: 3609 * Register a hook function which will be called immediately before this 3610 * CPU changes exception level or mode. The hook function will be 3611 * passed a pointer to the ARMCPU and the opaque data pointer passed 3612 * to this function when the hook was registered. 3613 * 3614 * Note that if a pre-change hook is called, any registered post-change hooks 3615 * are guaranteed to subsequently be called. 3616 */ 3617 void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, 3618 void *opaque); 3619 /** 3620 * arm_register_el_change_hook: 3621 * Register a hook function which will be called immediately after this 3622 * CPU changes exception level or mode. The hook function will be 3623 * passed a pointer to the ARMCPU and the opaque data pointer passed 3624 * to this function when the hook was registered. 3625 * 3626 * Note that any registered hooks registered here are guaranteed to be called 3627 * if pre-change hooks have been. 3628 */ 3629 void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void 3630 *opaque); 3631 3632 /** 3633 * arm_rebuild_hflags: 3634 * Rebuild the cached TBFLAGS for arbitrary changed processor state. 3635 */ 3636 void arm_rebuild_hflags(CPUARMState *env); 3637 3638 /** 3639 * aa32_vfp_dreg: 3640 * Return a pointer to the Dn register within env in 32-bit mode. 3641 */ 3642 static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno) 3643 { 3644 return &env->vfp.zregs[regno >> 1].d[regno & 1]; 3645 } 3646 3647 /** 3648 * aa32_vfp_qreg: 3649 * Return a pointer to the Qn register within env in 32-bit mode. 3650 */ 3651 static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno) 3652 { 3653 return &env->vfp.zregs[regno].d[0]; 3654 } 3655 3656 /** 3657 * aa64_vfp_qreg: 3658 * Return a pointer to the Qn register within env in 64-bit mode. 3659 */ 3660 static inline uint64_t *aa64_vfp_qreg(CPUARMState *env, unsigned regno) 3661 { 3662 return &env->vfp.zregs[regno].d[0]; 3663 } 3664 3665 /* Shared between translate-sve.c and sve_helper.c. */ 3666 extern const uint64_t pred_esz_masks[4]; 3667 3668 /* Helper for the macros below, validating the argument type. */ 3669 static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) 3670 { 3671 return x; 3672 } 3673 3674 /* 3675 * Lvalue macros for ARM TLB bits that we must cache in the TCG TLB. 3676 * Using these should be a bit more self-documenting than using the 3677 * generic target bits directly. 3678 */ 3679 #define arm_tlb_bti_gp(x) (typecheck_memtxattrs(x)->target_tlb_bit0) 3680 #define arm_tlb_mte_tagged(x) (typecheck_memtxattrs(x)->target_tlb_bit1) 3681 3682 /* 3683 * AArch64 usage of the PAGE_TARGET_* bits for linux-user. 3684 */ 3685 #define PAGE_BTI PAGE_TARGET_1 3686 #define PAGE_MTE PAGE_TARGET_2 3687 3688 #ifdef TARGET_TAGGED_ADDRESSES 3689 /** 3690 * cpu_untagged_addr: 3691 * @cs: CPU context 3692 * @x: tagged address 3693 * 3694 * Remove any address tag from @x. This is explicitly related to the 3695 * linux syscall TIF_TAGGED_ADDR setting, not TBI in general. 3696 * 3697 * There should be a better place to put this, but we need this in 3698 * include/exec/cpu_ldst.h, and not some place linux-user specific. 3699 */ 3700 static inline target_ulong cpu_untagged_addr(CPUState *cs, target_ulong x) 3701 { 3702 ARMCPU *cpu = ARM_CPU(cs); 3703 if (cpu->env.tagged_addr_enable) { 3704 /* 3705 * TBI is enabled for userspace but not kernelspace addresses. 3706 * Only clear the tag if bit 55 is clear. 3707 */ 3708 x &= sextract64(x, 0, 56); 3709 } 3710 return x; 3711 } 3712 #endif 3713 3714 /* 3715 * Naming convention for isar_feature functions: 3716 * Functions which test 32-bit ID registers should have _aa32_ in 3717 * their name. Functions which test 64-bit ID registers should have 3718 * _aa64_ in their name. These must only be used in code where we 3719 * know for certain that the CPU has AArch32 or AArch64 respectively 3720 * or where the correct answer for a CPU which doesn't implement that 3721 * CPU state is "false" (eg when generating A32 or A64 code, if adding 3722 * system registers that are specific to that CPU state, for "should 3723 * we let this system register bit be set" tests where the 32-bit 3724 * flavour of the register doesn't have the bit, and so on). 3725 * Functions which simply ask "does this feature exist at all" have 3726 * _any_ in their name, and always return the logical OR of the _aa64_ 3727 * and the _aa32_ function. 3728 */ 3729 3730 /* 3731 * 32-bit feature tests via id registers. 3732 */ 3733 static inline bool isar_feature_aa32_thumb_div(const ARMISARegisters *id) 3734 { 3735 return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) != 0; 3736 } 3737 3738 static inline bool isar_feature_aa32_arm_div(const ARMISARegisters *id) 3739 { 3740 return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) > 1; 3741 } 3742 3743 static inline bool isar_feature_aa32_lob(const ARMISARegisters *id) 3744 { 3745 /* (M-profile) low-overhead loops and branch future */ 3746 return FIELD_EX32(id->id_isar0, ID_ISAR0, CMPBRANCH) >= 3; 3747 } 3748 3749 static inline bool isar_feature_aa32_jazelle(const ARMISARegisters *id) 3750 { 3751 return FIELD_EX32(id->id_isar1, ID_ISAR1, JAZELLE) != 0; 3752 } 3753 3754 static inline bool isar_feature_aa32_aes(const ARMISARegisters *id) 3755 { 3756 return FIELD_EX32(id->id_isar5, ID_ISAR5, AES) != 0; 3757 } 3758 3759 static inline bool isar_feature_aa32_pmull(const ARMISARegisters *id) 3760 { 3761 return FIELD_EX32(id->id_isar5, ID_ISAR5, AES) > 1; 3762 } 3763 3764 static inline bool isar_feature_aa32_sha1(const ARMISARegisters *id) 3765 { 3766 return FIELD_EX32(id->id_isar5, ID_ISAR5, SHA1) != 0; 3767 } 3768 3769 static inline bool isar_feature_aa32_sha2(const ARMISARegisters *id) 3770 { 3771 return FIELD_EX32(id->id_isar5, ID_ISAR5, SHA2) != 0; 3772 } 3773 3774 static inline bool isar_feature_aa32_crc32(const ARMISARegisters *id) 3775 { 3776 return FIELD_EX32(id->id_isar5, ID_ISAR5, CRC32) != 0; 3777 } 3778 3779 static inline bool isar_feature_aa32_rdm(const ARMISARegisters *id) 3780 { 3781 return FIELD_EX32(id->id_isar5, ID_ISAR5, RDM) != 0; 3782 } 3783 3784 static inline bool isar_feature_aa32_vcma(const ARMISARegisters *id) 3785 { 3786 return FIELD_EX32(id->id_isar5, ID_ISAR5, VCMA) != 0; 3787 } 3788 3789 static inline bool isar_feature_aa32_jscvt(const ARMISARegisters *id) 3790 { 3791 return FIELD_EX32(id->id_isar6, ID_ISAR6, JSCVT) != 0; 3792 } 3793 3794 static inline bool isar_feature_aa32_dp(const ARMISARegisters *id) 3795 { 3796 return FIELD_EX32(id->id_isar6, ID_ISAR6, DP) != 0; 3797 } 3798 3799 static inline bool isar_feature_aa32_fhm(const ARMISARegisters *id) 3800 { 3801 return FIELD_EX32(id->id_isar6, ID_ISAR6, FHM) != 0; 3802 } 3803 3804 static inline bool isar_feature_aa32_sb(const ARMISARegisters *id) 3805 { 3806 return FIELD_EX32(id->id_isar6, ID_ISAR6, SB) != 0; 3807 } 3808 3809 static inline bool isar_feature_aa32_predinv(const ARMISARegisters *id) 3810 { 3811 return FIELD_EX32(id->id_isar6, ID_ISAR6, SPECRES) != 0; 3812 } 3813 3814 static inline bool isar_feature_aa32_bf16(const ARMISARegisters *id) 3815 { 3816 return FIELD_EX32(id->id_isar6, ID_ISAR6, BF16) != 0; 3817 } 3818 3819 static inline bool isar_feature_aa32_i8mm(const ARMISARegisters *id) 3820 { 3821 return FIELD_EX32(id->id_isar6, ID_ISAR6, I8MM) != 0; 3822 } 3823 3824 static inline bool isar_feature_aa32_ras(const ARMISARegisters *id) 3825 { 3826 return FIELD_EX32(id->id_pfr0, ID_PFR0, RAS) != 0; 3827 } 3828 3829 static inline bool isar_feature_aa32_mprofile(const ARMISARegisters *id) 3830 { 3831 return FIELD_EX32(id->id_pfr1, ID_PFR1, MPROGMOD) != 0; 3832 } 3833 3834 static inline bool isar_feature_aa32_m_sec_state(const ARMISARegisters *id) 3835 { 3836 /* 3837 * Return true if M-profile state handling insns 3838 * (VSCCLRM, CLRM, FPCTX access insns) are implemented 3839 */ 3840 return FIELD_EX32(id->id_pfr1, ID_PFR1, SECURITY) >= 3; 3841 } 3842 3843 static inline bool isar_feature_aa32_fp16_arith(const ARMISARegisters *id) 3844 { 3845 /* Sadly this is encoded differently for A-profile and M-profile */ 3846 if (isar_feature_aa32_mprofile(id)) { 3847 return FIELD_EX32(id->mvfr1, MVFR1, FP16) > 0; 3848 } else { 3849 return FIELD_EX32(id->mvfr1, MVFR1, FPHP) >= 3; 3850 } 3851 } 3852 3853 static inline bool isar_feature_aa32_mve(const ARMISARegisters *id) 3854 { 3855 /* 3856 * Return true if MVE is supported (either integer or floating point). 3857 * We must check for M-profile as the MVFR1 field means something 3858 * else for A-profile. 3859 */ 3860 return isar_feature_aa32_mprofile(id) && 3861 FIELD_EX32(id->mvfr1, MVFR1, MVE) > 0; 3862 } 3863 3864 static inline bool isar_feature_aa32_mve_fp(const ARMISARegisters *id) 3865 { 3866 /* 3867 * Return true if MVE is supported (either integer or floating point). 3868 * We must check for M-profile as the MVFR1 field means something 3869 * else for A-profile. 3870 */ 3871 return isar_feature_aa32_mprofile(id) && 3872 FIELD_EX32(id->mvfr1, MVFR1, MVE) >= 2; 3873 } 3874 3875 static inline bool isar_feature_aa32_vfp_simd(const ARMISARegisters *id) 3876 { 3877 /* 3878 * Return true if either VFP or SIMD is implemented. 3879 * In this case, a minimum of VFP w/ D0-D15. 3880 */ 3881 return FIELD_EX32(id->mvfr0, MVFR0, SIMDREG) > 0; 3882 } 3883 3884 static inline bool isar_feature_aa32_simd_r32(const ARMISARegisters *id) 3885 { 3886 /* Return true if D16-D31 are implemented */ 3887 return FIELD_EX32(id->mvfr0, MVFR0, SIMDREG) >= 2; 3888 } 3889 3890 static inline bool isar_feature_aa32_fpshvec(const ARMISARegisters *id) 3891 { 3892 return FIELD_EX32(id->mvfr0, MVFR0, FPSHVEC) > 0; 3893 } 3894 3895 static inline bool isar_feature_aa32_fpsp_v2(const ARMISARegisters *id) 3896 { 3897 /* Return true if CPU supports single precision floating point, VFPv2 */ 3898 return FIELD_EX32(id->mvfr0, MVFR0, FPSP) > 0; 3899 } 3900 3901 static inline bool isar_feature_aa32_fpsp_v3(const ARMISARegisters *id) 3902 { 3903 /* Return true if CPU supports single precision floating point, VFPv3 */ 3904 return FIELD_EX32(id->mvfr0, MVFR0, FPSP) >= 2; 3905 } 3906 3907 static inline bool isar_feature_aa32_fpdp_v2(const ARMISARegisters *id) 3908 { 3909 /* Return true if CPU supports double precision floating point, VFPv2 */ 3910 return FIELD_EX32(id->mvfr0, MVFR0, FPDP) > 0; 3911 } 3912 3913 static inline bool isar_feature_aa32_fpdp_v3(const ARMISARegisters *id) 3914 { 3915 /* Return true if CPU supports double precision floating point, VFPv3 */ 3916 return FIELD_EX32(id->mvfr0, MVFR0, FPDP) >= 2; 3917 } 3918 3919 static inline bool isar_feature_aa32_vfp(const ARMISARegisters *id) 3920 { 3921 return isar_feature_aa32_fpsp_v2(id) || isar_feature_aa32_fpdp_v2(id); 3922 } 3923 3924 /* 3925 * We always set the FP and SIMD FP16 fields to indicate identical 3926 * levels of support (assuming SIMD is implemented at all), so 3927 * we only need one set of accessors. 3928 */ 3929 static inline bool isar_feature_aa32_fp16_spconv(const ARMISARegisters *id) 3930 { 3931 return FIELD_EX32(id->mvfr1, MVFR1, FPHP) > 0; 3932 } 3933 3934 static inline bool isar_feature_aa32_fp16_dpconv(const ARMISARegisters *id) 3935 { 3936 return FIELD_EX32(id->mvfr1, MVFR1, FPHP) > 1; 3937 } 3938 3939 /* 3940 * Note that this ID register field covers both VFP and Neon FMAC, 3941 * so should usually be tested in combination with some other 3942 * check that confirms the presence of whichever of VFP or Neon is 3943 * relevant, to avoid accidentally enabling a Neon feature on 3944 * a VFP-no-Neon core or vice-versa. 3945 */ 3946 static inline bool isar_feature_aa32_simdfmac(const ARMISARegisters *id) 3947 { 3948 return FIELD_EX32(id->mvfr1, MVFR1, SIMDFMAC) != 0; 3949 } 3950 3951 static inline bool isar_feature_aa32_vsel(const ARMISARegisters *id) 3952 { 3953 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 1; 3954 } 3955 3956 static inline bool isar_feature_aa32_vcvt_dr(const ARMISARegisters *id) 3957 { 3958 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 2; 3959 } 3960 3961 static inline bool isar_feature_aa32_vrint(const ARMISARegisters *id) 3962 { 3963 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 3; 3964 } 3965 3966 static inline bool isar_feature_aa32_vminmaxnm(const ARMISARegisters *id) 3967 { 3968 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 4; 3969 } 3970 3971 static inline bool isar_feature_aa32_pxn(const ARMISARegisters *id) 3972 { 3973 return FIELD_EX32(id->id_mmfr0, ID_MMFR0, VMSA) >= 4; 3974 } 3975 3976 static inline bool isar_feature_aa32_pan(const ARMISARegisters *id) 3977 { 3978 return FIELD_EX32(id->id_mmfr3, ID_MMFR3, PAN) != 0; 3979 } 3980 3981 static inline bool isar_feature_aa32_ats1e1(const ARMISARegisters *id) 3982 { 3983 return FIELD_EX32(id->id_mmfr3, ID_MMFR3, PAN) >= 2; 3984 } 3985 3986 static inline bool isar_feature_aa32_pmu_8_1(const ARMISARegisters *id) 3987 { 3988 /* 0xf means "non-standard IMPDEF PMU" */ 3989 return FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) >= 4 && 3990 FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) != 0xf; 3991 } 3992 3993 static inline bool isar_feature_aa32_pmu_8_4(const ARMISARegisters *id) 3994 { 3995 /* 0xf means "non-standard IMPDEF PMU" */ 3996 return FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) >= 5 && 3997 FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) != 0xf; 3998 } 3999 4000 static inline bool isar_feature_aa32_hpd(const ARMISARegisters *id) 4001 { 4002 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, HPDS) != 0; 4003 } 4004 4005 static inline bool isar_feature_aa32_ac2(const ARMISARegisters *id) 4006 { 4007 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, AC2) != 0; 4008 } 4009 4010 static inline bool isar_feature_aa32_ccidx(const ARMISARegisters *id) 4011 { 4012 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, CCIDX) != 0; 4013 } 4014 4015 static inline bool isar_feature_aa32_tts2uxn(const ARMISARegisters *id) 4016 { 4017 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, XNX) != 0; 4018 } 4019 4020 static inline bool isar_feature_aa32_dit(const ARMISARegisters *id) 4021 { 4022 return FIELD_EX32(id->id_pfr0, ID_PFR0, DIT) != 0; 4023 } 4024 4025 static inline bool isar_feature_aa32_ssbs(const ARMISARegisters *id) 4026 { 4027 return FIELD_EX32(id->id_pfr2, ID_PFR2, SSBS) != 0; 4028 } 4029 4030 /* 4031 * 64-bit feature tests via id registers. 4032 */ 4033 static inline bool isar_feature_aa64_aes(const ARMISARegisters *id) 4034 { 4035 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, AES) != 0; 4036 } 4037 4038 static inline bool isar_feature_aa64_pmull(const ARMISARegisters *id) 4039 { 4040 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, AES) > 1; 4041 } 4042 4043 static inline bool isar_feature_aa64_sha1(const ARMISARegisters *id) 4044 { 4045 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA1) != 0; 4046 } 4047 4048 static inline bool isar_feature_aa64_sha256(const ARMISARegisters *id) 4049 { 4050 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA2) != 0; 4051 } 4052 4053 static inline bool isar_feature_aa64_sha512(const ARMISARegisters *id) 4054 { 4055 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA2) > 1; 4056 } 4057 4058 static inline bool isar_feature_aa64_crc32(const ARMISARegisters *id) 4059 { 4060 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, CRC32) != 0; 4061 } 4062 4063 static inline bool isar_feature_aa64_atomics(const ARMISARegisters *id) 4064 { 4065 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, ATOMIC) != 0; 4066 } 4067 4068 static inline bool isar_feature_aa64_rdm(const ARMISARegisters *id) 4069 { 4070 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, RDM) != 0; 4071 } 4072 4073 static inline bool isar_feature_aa64_sha3(const ARMISARegisters *id) 4074 { 4075 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA3) != 0; 4076 } 4077 4078 static inline bool isar_feature_aa64_sm3(const ARMISARegisters *id) 4079 { 4080 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SM3) != 0; 4081 } 4082 4083 static inline bool isar_feature_aa64_sm4(const ARMISARegisters *id) 4084 { 4085 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SM4) != 0; 4086 } 4087 4088 static inline bool isar_feature_aa64_dp(const ARMISARegisters *id) 4089 { 4090 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, DP) != 0; 4091 } 4092 4093 static inline bool isar_feature_aa64_fhm(const ARMISARegisters *id) 4094 { 4095 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, FHM) != 0; 4096 } 4097 4098 static inline bool isar_feature_aa64_condm_4(const ARMISARegisters *id) 4099 { 4100 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, TS) != 0; 4101 } 4102 4103 static inline bool isar_feature_aa64_condm_5(const ARMISARegisters *id) 4104 { 4105 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, TS) >= 2; 4106 } 4107 4108 static inline bool isar_feature_aa64_rndr(const ARMISARegisters *id) 4109 { 4110 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, RNDR) != 0; 4111 } 4112 4113 static inline bool isar_feature_aa64_jscvt(const ARMISARegisters *id) 4114 { 4115 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, JSCVT) != 0; 4116 } 4117 4118 static inline bool isar_feature_aa64_fcma(const ARMISARegisters *id) 4119 { 4120 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, FCMA) != 0; 4121 } 4122 4123 static inline bool isar_feature_aa64_pauth(const ARMISARegisters *id) 4124 { 4125 /* 4126 * Return true if any form of pauth is enabled, as this 4127 * predicate controls migration of the 128-bit keys. 4128 */ 4129 return (id->id_aa64isar1 & 4130 (FIELD_DP64(0, ID_AA64ISAR1, APA, 0xf) | 4131 FIELD_DP64(0, ID_AA64ISAR1, API, 0xf) | 4132 FIELD_DP64(0, ID_AA64ISAR1, GPA, 0xf) | 4133 FIELD_DP64(0, ID_AA64ISAR1, GPI, 0xf))) != 0; 4134 } 4135 4136 static inline bool isar_feature_aa64_pauth_arch(const ARMISARegisters *id) 4137 { 4138 /* 4139 * Return true if pauth is enabled with the architected QARMA algorithm. 4140 * QEMU will always set APA+GPA to the same value. 4141 */ 4142 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, APA) != 0; 4143 } 4144 4145 static inline bool isar_feature_aa64_tlbirange(const ARMISARegisters *id) 4146 { 4147 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, TLB) == 2; 4148 } 4149 4150 static inline bool isar_feature_aa64_tlbios(const ARMISARegisters *id) 4151 { 4152 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, TLB) != 0; 4153 } 4154 4155 static inline bool isar_feature_aa64_sb(const ARMISARegisters *id) 4156 { 4157 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, SB) != 0; 4158 } 4159 4160 static inline bool isar_feature_aa64_predinv(const ARMISARegisters *id) 4161 { 4162 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, SPECRES) != 0; 4163 } 4164 4165 static inline bool isar_feature_aa64_frint(const ARMISARegisters *id) 4166 { 4167 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, FRINTTS) != 0; 4168 } 4169 4170 static inline bool isar_feature_aa64_dcpop(const ARMISARegisters *id) 4171 { 4172 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) != 0; 4173 } 4174 4175 static inline bool isar_feature_aa64_dcpodp(const ARMISARegisters *id) 4176 { 4177 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) >= 2; 4178 } 4179 4180 static inline bool isar_feature_aa64_bf16(const ARMISARegisters *id) 4181 { 4182 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, BF16) != 0; 4183 } 4184 4185 static inline bool isar_feature_aa64_fp_simd(const ARMISARegisters *id) 4186 { 4187 /* We always set the AdvSIMD and FP fields identically. */ 4188 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) != 0xf; 4189 } 4190 4191 static inline bool isar_feature_aa64_fp16(const ARMISARegisters *id) 4192 { 4193 /* We always set the AdvSIMD and FP fields identically wrt FP16. */ 4194 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) == 1; 4195 } 4196 4197 static inline bool isar_feature_aa64_aa32(const ARMISARegisters *id) 4198 { 4199 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, EL0) >= 2; 4200 } 4201 4202 static inline bool isar_feature_aa64_aa32_el1(const ARMISARegisters *id) 4203 { 4204 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, EL1) >= 2; 4205 } 4206 4207 static inline bool isar_feature_aa64_sve(const ARMISARegisters *id) 4208 { 4209 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SVE) != 0; 4210 } 4211 4212 static inline bool isar_feature_aa64_sel2(const ARMISARegisters *id) 4213 { 4214 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SEL2) != 0; 4215 } 4216 4217 static inline bool isar_feature_aa64_vh(const ARMISARegisters *id) 4218 { 4219 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, VH) != 0; 4220 } 4221 4222 static inline bool isar_feature_aa64_lor(const ARMISARegisters *id) 4223 { 4224 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, LO) != 0; 4225 } 4226 4227 static inline bool isar_feature_aa64_pan(const ARMISARegisters *id) 4228 { 4229 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, PAN) != 0; 4230 } 4231 4232 static inline bool isar_feature_aa64_ats1e1(const ARMISARegisters *id) 4233 { 4234 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, PAN) >= 2; 4235 } 4236 4237 static inline bool isar_feature_aa64_uao(const ARMISARegisters *id) 4238 { 4239 return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, UAO) != 0; 4240 } 4241 4242 static inline bool isar_feature_aa64_st(const ARMISARegisters *id) 4243 { 4244 return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, ST) != 0; 4245 } 4246 4247 static inline bool isar_feature_aa64_bti(const ARMISARegisters *id) 4248 { 4249 return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, BT) != 0; 4250 } 4251 4252 static inline bool isar_feature_aa64_mte_insn_reg(const ARMISARegisters *id) 4253 { 4254 return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, MTE) != 0; 4255 } 4256 4257 static inline bool isar_feature_aa64_mte(const ARMISARegisters *id) 4258 { 4259 return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, MTE) >= 2; 4260 } 4261 4262 static inline bool isar_feature_aa64_pmu_8_1(const ARMISARegisters *id) 4263 { 4264 return FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) >= 4 && 4265 FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) != 0xf; 4266 } 4267 4268 static inline bool isar_feature_aa64_pmu_8_4(const ARMISARegisters *id) 4269 { 4270 return FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) >= 5 && 4271 FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) != 0xf; 4272 } 4273 4274 static inline bool isar_feature_aa64_rcpc_8_3(const ARMISARegisters *id) 4275 { 4276 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) != 0; 4277 } 4278 4279 static inline bool isar_feature_aa64_rcpc_8_4(const ARMISARegisters *id) 4280 { 4281 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) >= 2; 4282 } 4283 4284 static inline bool isar_feature_aa64_i8mm(const ARMISARegisters *id) 4285 { 4286 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, I8MM) != 0; 4287 } 4288 4289 static inline bool isar_feature_aa64_ccidx(const ARMISARegisters *id) 4290 { 4291 return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, CCIDX) != 0; 4292 } 4293 4294 static inline bool isar_feature_aa64_tts2uxn(const ARMISARegisters *id) 4295 { 4296 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, XNX) != 0; 4297 } 4298 4299 static inline bool isar_feature_aa64_dit(const ARMISARegisters *id) 4300 { 4301 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, DIT) != 0; 4302 } 4303 4304 static inline bool isar_feature_aa64_ssbs(const ARMISARegisters *id) 4305 { 4306 return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SSBS) != 0; 4307 } 4308 4309 static inline bool isar_feature_aa64_sve2(const ARMISARegisters *id) 4310 { 4311 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, SVEVER) != 0; 4312 } 4313 4314 static inline bool isar_feature_aa64_sve2_aes(const ARMISARegisters *id) 4315 { 4316 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, AES) != 0; 4317 } 4318 4319 static inline bool isar_feature_aa64_sve2_pmull128(const ARMISARegisters *id) 4320 { 4321 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, AES) >= 2; 4322 } 4323 4324 static inline bool isar_feature_aa64_sve2_bitperm(const ARMISARegisters *id) 4325 { 4326 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, BITPERM) != 0; 4327 } 4328 4329 static inline bool isar_feature_aa64_sve_bf16(const ARMISARegisters *id) 4330 { 4331 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, BFLOAT16) != 0; 4332 } 4333 4334 static inline bool isar_feature_aa64_sve2_sha3(const ARMISARegisters *id) 4335 { 4336 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, SHA3) != 0; 4337 } 4338 4339 static inline bool isar_feature_aa64_sve2_sm4(const ARMISARegisters *id) 4340 { 4341 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, SM4) != 0; 4342 } 4343 4344 static inline bool isar_feature_aa64_sve_i8mm(const ARMISARegisters *id) 4345 { 4346 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, I8MM) != 0; 4347 } 4348 4349 static inline bool isar_feature_aa64_sve_f32mm(const ARMISARegisters *id) 4350 { 4351 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, F32MM) != 0; 4352 } 4353 4354 static inline bool isar_feature_aa64_sve_f64mm(const ARMISARegisters *id) 4355 { 4356 return FIELD_EX64(id->id_aa64zfr0, ID_AA64ZFR0, F64MM) != 0; 4357 } 4358 4359 /* 4360 * Feature tests for "does this exist in either 32-bit or 64-bit?" 4361 */ 4362 static inline bool isar_feature_any_fp16(const ARMISARegisters *id) 4363 { 4364 return isar_feature_aa64_fp16(id) || isar_feature_aa32_fp16_arith(id); 4365 } 4366 4367 static inline bool isar_feature_any_predinv(const ARMISARegisters *id) 4368 { 4369 return isar_feature_aa64_predinv(id) || isar_feature_aa32_predinv(id); 4370 } 4371 4372 static inline bool isar_feature_any_pmu_8_1(const ARMISARegisters *id) 4373 { 4374 return isar_feature_aa64_pmu_8_1(id) || isar_feature_aa32_pmu_8_1(id); 4375 } 4376 4377 static inline bool isar_feature_any_pmu_8_4(const ARMISARegisters *id) 4378 { 4379 return isar_feature_aa64_pmu_8_4(id) || isar_feature_aa32_pmu_8_4(id); 4380 } 4381 4382 static inline bool isar_feature_any_ccidx(const ARMISARegisters *id) 4383 { 4384 return isar_feature_aa64_ccidx(id) || isar_feature_aa32_ccidx(id); 4385 } 4386 4387 static inline bool isar_feature_any_tts2uxn(const ARMISARegisters *id) 4388 { 4389 return isar_feature_aa64_tts2uxn(id) || isar_feature_aa32_tts2uxn(id); 4390 } 4391 4392 /* 4393 * Forward to the above feature tests given an ARMCPU pointer. 4394 */ 4395 #define cpu_isar_feature(name, cpu) \ 4396 ({ ARMCPU *cpu_ = (cpu); isar_feature_##name(&cpu_->isar); }) 4397 4398 #endif 4399