1 /* 2 * ARM virtual CPU header 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 #ifndef ARM_CPU_H 21 #define ARM_CPU_H 22 23 #include "kvm-consts.h" 24 #include "hw/registerfields.h" 25 #include "cpu-qom.h" 26 #include "exec/cpu-defs.h" 27 28 /* ARM processors have a weak memory model */ 29 #define TCG_GUEST_DEFAULT_MO (0) 30 31 #ifdef TARGET_AARCH64 32 #define KVM_HAVE_MCE_INJECTION 1 33 #endif 34 35 #define EXCP_UDEF 1 /* undefined instruction */ 36 #define EXCP_SWI 2 /* software interrupt */ 37 #define EXCP_PREFETCH_ABORT 3 38 #define EXCP_DATA_ABORT 4 39 #define EXCP_IRQ 5 40 #define EXCP_FIQ 6 41 #define EXCP_BKPT 7 42 #define EXCP_EXCEPTION_EXIT 8 /* Return from v7M exception. */ 43 #define EXCP_KERNEL_TRAP 9 /* Jumped to kernel code page. */ 44 #define EXCP_HVC 11 /* HyperVisor Call */ 45 #define EXCP_HYP_TRAP 12 46 #define EXCP_SMC 13 /* Secure Monitor Call */ 47 #define EXCP_VIRQ 14 48 #define EXCP_VFIQ 15 49 #define EXCP_SEMIHOST 16 /* semihosting call */ 50 #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ 51 #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ 52 #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ 53 #define EXCP_LAZYFP 20 /* v7M fault during lazy FP stacking */ 54 #define EXCP_LSERR 21 /* v8M LSERR SecureFault */ 55 #define EXCP_UNALIGNED 22 /* v7M UNALIGNED UsageFault */ 56 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ 57 58 #define ARMV7M_EXCP_RESET 1 59 #define ARMV7M_EXCP_NMI 2 60 #define ARMV7M_EXCP_HARD 3 61 #define ARMV7M_EXCP_MEM 4 62 #define ARMV7M_EXCP_BUS 5 63 #define ARMV7M_EXCP_USAGE 6 64 #define ARMV7M_EXCP_SECURE 7 65 #define ARMV7M_EXCP_SVC 11 66 #define ARMV7M_EXCP_DEBUG 12 67 #define ARMV7M_EXCP_PENDSV 14 68 #define ARMV7M_EXCP_SYSTICK 15 69 70 /* For M profile, some registers are banked secure vs non-secure; 71 * these are represented as a 2-element array where the first element 72 * is the non-secure copy and the second is the secure copy. 73 * When the CPU does not have implement the security extension then 74 * only the first element is used. 75 * This means that the copy for the current security state can be 76 * accessed via env->registerfield[env->v7m.secure] (whether the security 77 * extension is implemented or not). 78 */ 79 enum { 80 M_REG_NS = 0, 81 M_REG_S = 1, 82 M_REG_NUM_BANKS = 2, 83 }; 84 85 /* ARM-specific interrupt pending bits. */ 86 #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 87 #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 88 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 89 90 /* The usual mapping for an AArch64 system register to its AArch32 91 * counterpart is for the 32 bit world to have access to the lower 92 * half only (with writes leaving the upper half untouched). It's 93 * therefore useful to be able to pass TCG the offset of the least 94 * significant half of a uint64_t struct member. 95 */ 96 #ifdef HOST_WORDS_BIGENDIAN 97 #define offsetoflow32(S, M) (offsetof(S, M) + sizeof(uint32_t)) 98 #define offsetofhigh32(S, M) offsetof(S, M) 99 #else 100 #define offsetoflow32(S, M) offsetof(S, M) 101 #define offsetofhigh32(S, M) (offsetof(S, M) + sizeof(uint32_t)) 102 #endif 103 104 /* Meanings of the ARMCPU object's four inbound GPIO lines */ 105 #define ARM_CPU_IRQ 0 106 #define ARM_CPU_FIQ 1 107 #define ARM_CPU_VIRQ 2 108 #define ARM_CPU_VFIQ 3 109 110 /* ARM-specific extra insn start words: 111 * 1: Conditional execution bits 112 * 2: Partial exception syndrome for data aborts 113 */ 114 #define TARGET_INSN_START_EXTRA_WORDS 2 115 116 /* The 2nd extra word holding syndrome info for data aborts does not use 117 * the upper 6 bits nor the lower 14 bits. We mask and shift it down to 118 * help the sleb128 encoder do a better job. 119 * When restoring the CPU state, we shift it back up. 120 */ 121 #define ARM_INSN_START_WORD2_MASK ((1 << 26) - 1) 122 #define ARM_INSN_START_WORD2_SHIFT 14 123 124 /* We currently assume float and double are IEEE single and double 125 precision respectively. 126 Doing runtime conversions is tricky because VFP registers may contain 127 integer values (eg. as the result of a FTOSI instruction). 128 s<2n> maps to the least significant half of d<n> 129 s<2n+1> maps to the most significant half of d<n> 130 */ 131 132 /** 133 * DynamicGDBXMLInfo: 134 * @desc: Contains the XML descriptions. 135 * @num: Number of the registers in this XML seen by GDB. 136 * @data: A union with data specific to the set of registers 137 * @cpregs_keys: Array that contains the corresponding Key of 138 * a given cpreg with the same order of the cpreg 139 * in the XML description. 140 */ 141 typedef struct DynamicGDBXMLInfo { 142 char *desc; 143 int num; 144 union { 145 struct { 146 uint32_t *keys; 147 } cpregs; 148 } data; 149 } DynamicGDBXMLInfo; 150 151 /* CPU state for each instance of a generic timer (in cp15 c14) */ 152 typedef struct ARMGenericTimer { 153 uint64_t cval; /* Timer CompareValue register */ 154 uint64_t ctl; /* Timer Control register */ 155 } ARMGenericTimer; 156 157 #define GTIMER_PHYS 0 158 #define GTIMER_VIRT 1 159 #define GTIMER_HYP 2 160 #define GTIMER_SEC 3 161 #define GTIMER_HYPVIRT 4 162 #define NUM_GTIMERS 5 163 164 typedef struct { 165 uint64_t raw_tcr; 166 uint32_t mask; 167 uint32_t base_mask; 168 } TCR; 169 170 /* Define a maximum sized vector register. 171 * For 32-bit, this is a 128-bit NEON/AdvSIMD register. 172 * For 64-bit, this is a 2048-bit SVE register. 173 * 174 * Note that the mapping between S, D, and Q views of the register bank 175 * differs between AArch64 and AArch32. 176 * In AArch32: 177 * Qn = regs[n].d[1]:regs[n].d[0] 178 * Dn = regs[n / 2].d[n & 1] 179 * Sn = regs[n / 4].d[n % 4 / 2], 180 * bits 31..0 for even n, and bits 63..32 for odd n 181 * (and regs[16] to regs[31] are inaccessible) 182 * In AArch64: 183 * Zn = regs[n].d[*] 184 * Qn = regs[n].d[1]:regs[n].d[0] 185 * Dn = regs[n].d[0] 186 * Sn = regs[n].d[0] bits 31..0 187 * Hn = regs[n].d[0] bits 15..0 188 * 189 * This corresponds to the architecturally defined mapping between 190 * the two execution states, and means we do not need to explicitly 191 * map these registers when changing states. 192 * 193 * Align the data for use with TCG host vector operations. 194 */ 195 196 #ifdef TARGET_AARCH64 197 # define ARM_MAX_VQ 16 198 void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp); 199 #else 200 # define ARM_MAX_VQ 1 201 static inline void arm_cpu_sve_finalize(ARMCPU *cpu, Error **errp) { } 202 #endif 203 204 typedef struct ARMVectorReg { 205 uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); 206 } ARMVectorReg; 207 208 #ifdef TARGET_AARCH64 209 /* In AArch32 mode, predicate registers do not exist at all. */ 210 typedef struct ARMPredicateReg { 211 uint64_t p[DIV_ROUND_UP(2 * ARM_MAX_VQ, 8)] QEMU_ALIGNED(16); 212 } ARMPredicateReg; 213 214 /* In AArch32 mode, PAC keys do not exist at all. */ 215 typedef struct ARMPACKey { 216 uint64_t lo, hi; 217 } ARMPACKey; 218 #endif 219 220 221 typedef struct CPUARMState { 222 /* Regs for current mode. */ 223 uint32_t regs[16]; 224 225 /* 32/64 switch only happens when taking and returning from 226 * exceptions so the overlap semantics are taken care of then 227 * instead of having a complicated union. 228 */ 229 /* Regs for A64 mode. */ 230 uint64_t xregs[32]; 231 uint64_t pc; 232 /* PSTATE isn't an architectural register for ARMv8. However, it is 233 * convenient for us to assemble the underlying state into a 32 bit format 234 * identical to the architectural format used for the SPSR. (This is also 235 * what the Linux kernel's 'pstate' field in signal handlers and KVM's 236 * 'pstate' register are.) Of the PSTATE bits: 237 * NZCV are kept in the split out env->CF/VF/NF/ZF, (which have the same 238 * semantics as for AArch32, as described in the comments on each field) 239 * nRW (also known as M[4]) is kept, inverted, in env->aarch64 240 * DAIF (exception masks) are kept in env->daif 241 * BTYPE is kept in env->btype 242 * all other bits are stored in their correct places in env->pstate 243 */ 244 uint32_t pstate; 245 uint32_t aarch64; /* 1 if CPU is in aarch64 state; inverse of PSTATE.nRW */ 246 247 /* Cached TBFLAGS state. See below for which bits are included. */ 248 uint32_t hflags; 249 250 /* Frequently accessed CPSR bits are stored separately for efficiency. 251 This contains all the other bits. Use cpsr_{read,write} to access 252 the whole CPSR. */ 253 uint32_t uncached_cpsr; 254 uint32_t spsr; 255 256 /* Banked registers. */ 257 uint64_t banked_spsr[8]; 258 uint32_t banked_r13[8]; 259 uint32_t banked_r14[8]; 260 261 /* These hold r8-r12. */ 262 uint32_t usr_regs[5]; 263 uint32_t fiq_regs[5]; 264 265 /* cpsr flag cache for faster execution */ 266 uint32_t CF; /* 0 or 1 */ 267 uint32_t VF; /* V is the bit 31. All other bits are undefined */ 268 uint32_t NF; /* N is bit 31. All other bits are undefined. */ 269 uint32_t ZF; /* Z set if zero. */ 270 uint32_t QF; /* 0 or 1 */ 271 uint32_t GE; /* cpsr[19:16] */ 272 uint32_t thumb; /* cpsr[5]. 0 = arm mode, 1 = thumb mode. */ 273 uint32_t condexec_bits; /* IT bits. cpsr[15:10,26:25]. */ 274 uint32_t btype; /* BTI branch type. spsr[11:10]. */ 275 uint64_t daif; /* exception masks, in the bits they are in PSTATE */ 276 277 uint64_t elr_el[4]; /* AArch64 exception link regs */ 278 uint64_t sp_el[4]; /* AArch64 banked stack pointers */ 279 280 /* System control coprocessor (cp15) */ 281 struct { 282 uint32_t c0_cpuid; 283 union { /* Cache size selection */ 284 struct { 285 uint64_t _unused_csselr0; 286 uint64_t csselr_ns; 287 uint64_t _unused_csselr1; 288 uint64_t csselr_s; 289 }; 290 uint64_t csselr_el[4]; 291 }; 292 union { /* System control register. */ 293 struct { 294 uint64_t _unused_sctlr; 295 uint64_t sctlr_ns; 296 uint64_t hsctlr; 297 uint64_t sctlr_s; 298 }; 299 uint64_t sctlr_el[4]; 300 }; 301 uint64_t cpacr_el1; /* Architectural feature access control register */ 302 uint64_t cptr_el[4]; /* ARMv8 feature trap registers */ 303 uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ 304 uint64_t sder; /* Secure debug enable register. */ 305 uint32_t nsacr; /* Non-secure access control register. */ 306 union { /* MMU translation table base 0. */ 307 struct { 308 uint64_t _unused_ttbr0_0; 309 uint64_t ttbr0_ns; 310 uint64_t _unused_ttbr0_1; 311 uint64_t ttbr0_s; 312 }; 313 uint64_t ttbr0_el[4]; 314 }; 315 union { /* MMU translation table base 1. */ 316 struct { 317 uint64_t _unused_ttbr1_0; 318 uint64_t ttbr1_ns; 319 uint64_t _unused_ttbr1_1; 320 uint64_t ttbr1_s; 321 }; 322 uint64_t ttbr1_el[4]; 323 }; 324 uint64_t vttbr_el2; /* Virtualization Translation Table Base. */ 325 /* MMU translation table base control. */ 326 TCR tcr_el[4]; 327 TCR vtcr_el2; /* Virtualization Translation Control. */ 328 uint32_t c2_data; /* MPU data cacheable bits. */ 329 uint32_t c2_insn; /* MPU instruction cacheable bits. */ 330 union { /* MMU domain access control register 331 * MPU write buffer control. 332 */ 333 struct { 334 uint64_t dacr_ns; 335 uint64_t dacr_s; 336 }; 337 struct { 338 uint64_t dacr32_el2; 339 }; 340 }; 341 uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */ 342 uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */ 343 uint64_t hcr_el2; /* Hypervisor configuration register */ 344 uint64_t scr_el3; /* Secure configuration register. */ 345 union { /* Fault status registers. */ 346 struct { 347 uint64_t ifsr_ns; 348 uint64_t ifsr_s; 349 }; 350 struct { 351 uint64_t ifsr32_el2; 352 }; 353 }; 354 union { 355 struct { 356 uint64_t _unused_dfsr; 357 uint64_t dfsr_ns; 358 uint64_t hsr; 359 uint64_t dfsr_s; 360 }; 361 uint64_t esr_el[4]; 362 }; 363 uint32_t c6_region[8]; /* MPU base/size registers. */ 364 union { /* Fault address registers. */ 365 struct { 366 uint64_t _unused_far0; 367 #ifdef HOST_WORDS_BIGENDIAN 368 uint32_t ifar_ns; 369 uint32_t dfar_ns; 370 uint32_t ifar_s; 371 uint32_t dfar_s; 372 #else 373 uint32_t dfar_ns; 374 uint32_t ifar_ns; 375 uint32_t dfar_s; 376 uint32_t ifar_s; 377 #endif 378 uint64_t _unused_far3; 379 }; 380 uint64_t far_el[4]; 381 }; 382 uint64_t hpfar_el2; 383 uint64_t hstr_el2; 384 union { /* Translation result. */ 385 struct { 386 uint64_t _unused_par_0; 387 uint64_t par_ns; 388 uint64_t _unused_par_1; 389 uint64_t par_s; 390 }; 391 uint64_t par_el[4]; 392 }; 393 394 uint32_t c9_insn; /* Cache lockdown registers. */ 395 uint32_t c9_data; 396 uint64_t c9_pmcr; /* performance monitor control register */ 397 uint64_t c9_pmcnten; /* perf monitor counter enables */ 398 uint64_t c9_pmovsr; /* perf monitor overflow status */ 399 uint64_t c9_pmuserenr; /* perf monitor user enable */ 400 uint64_t c9_pmselr; /* perf monitor counter selection register */ 401 uint64_t c9_pminten; /* perf monitor interrupt enables */ 402 union { /* Memory attribute redirection */ 403 struct { 404 #ifdef HOST_WORDS_BIGENDIAN 405 uint64_t _unused_mair_0; 406 uint32_t mair1_ns; 407 uint32_t mair0_ns; 408 uint64_t _unused_mair_1; 409 uint32_t mair1_s; 410 uint32_t mair0_s; 411 #else 412 uint64_t _unused_mair_0; 413 uint32_t mair0_ns; 414 uint32_t mair1_ns; 415 uint64_t _unused_mair_1; 416 uint32_t mair0_s; 417 uint32_t mair1_s; 418 #endif 419 }; 420 uint64_t mair_el[4]; 421 }; 422 union { /* vector base address register */ 423 struct { 424 uint64_t _unused_vbar; 425 uint64_t vbar_ns; 426 uint64_t hvbar; 427 uint64_t vbar_s; 428 }; 429 uint64_t vbar_el[4]; 430 }; 431 uint32_t mvbar; /* (monitor) vector base address register */ 432 struct { /* FCSE PID. */ 433 uint32_t fcseidr_ns; 434 uint32_t fcseidr_s; 435 }; 436 union { /* Context ID. */ 437 struct { 438 uint64_t _unused_contextidr_0; 439 uint64_t contextidr_ns; 440 uint64_t _unused_contextidr_1; 441 uint64_t contextidr_s; 442 }; 443 uint64_t contextidr_el[4]; 444 }; 445 union { /* User RW Thread register. */ 446 struct { 447 uint64_t tpidrurw_ns; 448 uint64_t tpidrprw_ns; 449 uint64_t htpidr; 450 uint64_t _tpidr_el3; 451 }; 452 uint64_t tpidr_el[4]; 453 }; 454 /* The secure banks of these registers don't map anywhere */ 455 uint64_t tpidrurw_s; 456 uint64_t tpidrprw_s; 457 uint64_t tpidruro_s; 458 459 union { /* User RO Thread register. */ 460 uint64_t tpidruro_ns; 461 uint64_t tpidrro_el[1]; 462 }; 463 uint64_t c14_cntfrq; /* Counter Frequency register */ 464 uint64_t c14_cntkctl; /* Timer Control register */ 465 uint32_t cnthctl_el2; /* Counter/Timer Hyp Control register */ 466 uint64_t cntvoff_el2; /* Counter Virtual Offset register */ 467 ARMGenericTimer c14_timer[NUM_GTIMERS]; 468 uint32_t c15_cpar; /* XScale Coprocessor Access Register */ 469 uint32_t c15_ticonfig; /* TI925T configuration byte. */ 470 uint32_t c15_i_max; /* Maximum D-cache dirty line index. */ 471 uint32_t c15_i_min; /* Minimum D-cache dirty line index. */ 472 uint32_t c15_threadid; /* TI debugger thread-ID. */ 473 uint32_t c15_config_base_address; /* SCU base address. */ 474 uint32_t c15_diagnostic; /* diagnostic register */ 475 uint32_t c15_power_diagnostic; 476 uint32_t c15_power_control; /* power control */ 477 uint64_t dbgbvr[16]; /* breakpoint value registers */ 478 uint64_t dbgbcr[16]; /* breakpoint control registers */ 479 uint64_t dbgwvr[16]; /* watchpoint value registers */ 480 uint64_t dbgwcr[16]; /* watchpoint control registers */ 481 uint64_t mdscr_el1; 482 uint64_t oslsr_el1; /* OS Lock Status */ 483 uint64_t mdcr_el2; 484 uint64_t mdcr_el3; 485 /* Stores the architectural value of the counter *the last time it was 486 * updated* by pmccntr_op_start. Accesses should always be surrounded 487 * by pmccntr_op_start/pmccntr_op_finish to guarantee the latest 488 * architecturally-correct value is being read/set. 489 */ 490 uint64_t c15_ccnt; 491 /* Stores the delta between the architectural value and the underlying 492 * cycle count during normal operation. It is used to update c15_ccnt 493 * to be the correct architectural value before accesses. During 494 * accesses, c15_ccnt_delta contains the underlying count being used 495 * for the access, after which it reverts to the delta value in 496 * pmccntr_op_finish. 497 */ 498 uint64_t c15_ccnt_delta; 499 uint64_t c14_pmevcntr[31]; 500 uint64_t c14_pmevcntr_delta[31]; 501 uint64_t c14_pmevtyper[31]; 502 uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */ 503 uint64_t vpidr_el2; /* Virtualization Processor ID Register */ 504 uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */ 505 uint64_t tfsr_el[4]; /* tfsre0_el1 is index 0. */ 506 uint64_t gcr_el1; 507 uint64_t rgsr_el1; 508 } cp15; 509 510 struct { 511 /* M profile has up to 4 stack pointers: 512 * a Main Stack Pointer and a Process Stack Pointer for each 513 * of the Secure and Non-Secure states. (If the CPU doesn't support 514 * the security extension then it has only two SPs.) 515 * In QEMU we always store the currently active SP in regs[13], 516 * and the non-active SP for the current security state in 517 * v7m.other_sp. The stack pointers for the inactive security state 518 * are stored in other_ss_msp and other_ss_psp. 519 * switch_v7m_security_state() is responsible for rearranging them 520 * when we change security state. 521 */ 522 uint32_t other_sp; 523 uint32_t other_ss_msp; 524 uint32_t other_ss_psp; 525 uint32_t vecbase[M_REG_NUM_BANKS]; 526 uint32_t basepri[M_REG_NUM_BANKS]; 527 uint32_t control[M_REG_NUM_BANKS]; 528 uint32_t ccr[M_REG_NUM_BANKS]; /* Configuration and Control */ 529 uint32_t cfsr[M_REG_NUM_BANKS]; /* Configurable Fault Status */ 530 uint32_t hfsr; /* HardFault Status */ 531 uint32_t dfsr; /* Debug Fault Status Register */ 532 uint32_t sfsr; /* Secure Fault Status Register */ 533 uint32_t mmfar[M_REG_NUM_BANKS]; /* MemManage Fault Address */ 534 uint32_t bfar; /* BusFault Address */ 535 uint32_t sfar; /* Secure Fault Address Register */ 536 unsigned mpu_ctrl[M_REG_NUM_BANKS]; /* MPU_CTRL */ 537 int exception; 538 uint32_t primask[M_REG_NUM_BANKS]; 539 uint32_t faultmask[M_REG_NUM_BANKS]; 540 uint32_t aircr; /* only holds r/w state if security extn implemented */ 541 uint32_t secure; /* Is CPU in Secure state? (not guest visible) */ 542 uint32_t csselr[M_REG_NUM_BANKS]; 543 uint32_t scr[M_REG_NUM_BANKS]; 544 uint32_t msplim[M_REG_NUM_BANKS]; 545 uint32_t psplim[M_REG_NUM_BANKS]; 546 uint32_t fpcar[M_REG_NUM_BANKS]; 547 uint32_t fpccr[M_REG_NUM_BANKS]; 548 uint32_t fpdscr[M_REG_NUM_BANKS]; 549 uint32_t cpacr[M_REG_NUM_BANKS]; 550 uint32_t nsacr; 551 } v7m; 552 553 /* Information associated with an exception about to be taken: 554 * code which raises an exception must set cs->exception_index and 555 * the relevant parts of this structure; the cpu_do_interrupt function 556 * will then set the guest-visible registers as part of the exception 557 * entry process. 558 */ 559 struct { 560 uint32_t syndrome; /* AArch64 format syndrome register */ 561 uint32_t fsr; /* AArch32 format fault status register info */ 562 uint64_t vaddress; /* virtual addr associated with exception, if any */ 563 uint32_t target_el; /* EL the exception should be targeted for */ 564 /* If we implement EL2 we will also need to store information 565 * about the intermediate physical address for stage 2 faults. 566 */ 567 } exception; 568 569 /* Information associated with an SError */ 570 struct { 571 uint8_t pending; 572 uint8_t has_esr; 573 uint64_t esr; 574 } serror; 575 576 uint8_t ext_dabt_raised; /* Tracking/verifying injection of ext DABT */ 577 578 /* State of our input IRQ/FIQ/VIRQ/VFIQ lines */ 579 uint32_t irq_line_state; 580 581 /* Thumb-2 EE state. */ 582 uint32_t teecr; 583 uint32_t teehbr; 584 585 /* VFP coprocessor state. */ 586 struct { 587 ARMVectorReg zregs[32]; 588 589 #ifdef TARGET_AARCH64 590 /* Store FFR as pregs[16] to make it easier to treat as any other. */ 591 #define FFR_PRED_NUM 16 592 ARMPredicateReg pregs[17]; 593 /* Scratch space for aa64 sve predicate temporary. */ 594 ARMPredicateReg preg_tmp; 595 #endif 596 597 /* We store these fpcsr fields separately for convenience. */ 598 uint32_t qc[4] QEMU_ALIGNED(16); 599 int vec_len; 600 int vec_stride; 601 602 uint32_t xregs[16]; 603 604 /* Scratch space for aa32 neon expansion. */ 605 uint32_t scratch[8]; 606 607 /* There are a number of distinct float control structures: 608 * 609 * fp_status: is the "normal" fp status. 610 * fp_status_fp16: used for half-precision calculations 611 * standard_fp_status : the ARM "Standard FPSCR Value" 612 * standard_fp_status_fp16 : used for half-precision 613 * calculations with the ARM "Standard FPSCR Value" 614 * 615 * Half-precision operations are governed by a separate 616 * flush-to-zero control bit in FPSCR:FZ16. We pass a separate 617 * status structure to control this. 618 * 619 * The "Standard FPSCR", ie default-NaN, flush-to-zero, 620 * round-to-nearest and is used by any operations (generally 621 * Neon) which the architecture defines as controlled by the 622 * standard FPSCR value rather than the FPSCR. 623 * 624 * The "standard FPSCR but for fp16 ops" is needed because 625 * the "standard FPSCR" tracks the FPSCR.FZ16 bit rather than 626 * using a fixed value for it. 627 * 628 * To avoid having to transfer exception bits around, we simply 629 * say that the FPSCR cumulative exception flags are the logical 630 * OR of the flags in the four fp statuses. This relies on the 631 * only thing which needs to read the exception flags being 632 * an explicit FPSCR read. 633 */ 634 float_status fp_status; 635 float_status fp_status_f16; 636 float_status standard_fp_status; 637 float_status standard_fp_status_f16; 638 639 /* ZCR_EL[1-3] */ 640 uint64_t zcr_el[4]; 641 } vfp; 642 uint64_t exclusive_addr; 643 uint64_t exclusive_val; 644 uint64_t exclusive_high; 645 646 /* iwMMXt coprocessor state. */ 647 struct { 648 uint64_t regs[16]; 649 uint64_t val; 650 651 uint32_t cregs[16]; 652 } iwmmxt; 653 654 #ifdef TARGET_AARCH64 655 struct { 656 ARMPACKey apia; 657 ARMPACKey apib; 658 ARMPACKey apda; 659 ARMPACKey apdb; 660 ARMPACKey apga; 661 } keys; 662 #endif 663 664 #if defined(CONFIG_USER_ONLY) 665 /* For usermode syscall translation. */ 666 int eabi; 667 #endif 668 669 struct CPUBreakpoint *cpu_breakpoint[16]; 670 struct CPUWatchpoint *cpu_watchpoint[16]; 671 672 /* Fields up to this point are cleared by a CPU reset */ 673 struct {} end_reset_fields; 674 675 /* Fields after this point are preserved across CPU reset. */ 676 677 /* Internal CPU feature flags. */ 678 uint64_t features; 679 680 /* PMSAv7 MPU */ 681 struct { 682 uint32_t *drbar; 683 uint32_t *drsr; 684 uint32_t *dracr; 685 uint32_t rnr[M_REG_NUM_BANKS]; 686 } pmsav7; 687 688 /* PMSAv8 MPU */ 689 struct { 690 /* The PMSAv8 implementation also shares some PMSAv7 config 691 * and state: 692 * pmsav7.rnr (region number register) 693 * pmsav7_dregion (number of configured regions) 694 */ 695 uint32_t *rbar[M_REG_NUM_BANKS]; 696 uint32_t *rlar[M_REG_NUM_BANKS]; 697 uint32_t mair0[M_REG_NUM_BANKS]; 698 uint32_t mair1[M_REG_NUM_BANKS]; 699 } pmsav8; 700 701 /* v8M SAU */ 702 struct { 703 uint32_t *rbar; 704 uint32_t *rlar; 705 uint32_t rnr; 706 uint32_t ctrl; 707 } sau; 708 709 void *nvic; 710 const struct arm_boot_info *boot_info; 711 /* Store GICv3CPUState to access from this struct */ 712 void *gicv3state; 713 } CPUARMState; 714 715 static inline void set_feature(CPUARMState *env, int feature) 716 { 717 env->features |= 1ULL << feature; 718 } 719 720 static inline void unset_feature(CPUARMState *env, int feature) 721 { 722 env->features &= ~(1ULL << feature); 723 } 724 725 /** 726 * ARMELChangeHookFn: 727 * type of a function which can be registered via arm_register_el_change_hook() 728 * to get callbacks when the CPU changes its exception level or mode. 729 */ 730 typedef void ARMELChangeHookFn(ARMCPU *cpu, void *opaque); 731 typedef struct ARMELChangeHook ARMELChangeHook; 732 struct ARMELChangeHook { 733 ARMELChangeHookFn *hook; 734 void *opaque; 735 QLIST_ENTRY(ARMELChangeHook) node; 736 }; 737 738 /* These values map onto the return values for 739 * QEMU_PSCI_0_2_FN_AFFINITY_INFO */ 740 typedef enum ARMPSCIState { 741 PSCI_ON = 0, 742 PSCI_OFF = 1, 743 PSCI_ON_PENDING = 2 744 } ARMPSCIState; 745 746 typedef struct ARMISARegisters ARMISARegisters; 747 748 /** 749 * ARMCPU: 750 * @env: #CPUARMState 751 * 752 * An ARM CPU core. 753 */ 754 struct ARMCPU { 755 /*< private >*/ 756 CPUState parent_obj; 757 /*< public >*/ 758 759 CPUNegativeOffsetState neg; 760 CPUARMState env; 761 762 /* Coprocessor information */ 763 GHashTable *cp_regs; 764 /* For marshalling (mostly coprocessor) register state between the 765 * kernel and QEMU (for KVM) and between two QEMUs (for migration), 766 * we use these arrays. 767 */ 768 /* List of register indexes managed via these arrays; (full KVM style 769 * 64 bit indexes, not CPRegInfo 32 bit indexes) 770 */ 771 uint64_t *cpreg_indexes; 772 /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */ 773 uint64_t *cpreg_values; 774 /* Length of the indexes, values, reset_values arrays */ 775 int32_t cpreg_array_len; 776 /* These are used only for migration: incoming data arrives in 777 * these fields and is sanity checked in post_load before copying 778 * to the working data structures above. 779 */ 780 uint64_t *cpreg_vmstate_indexes; 781 uint64_t *cpreg_vmstate_values; 782 int32_t cpreg_vmstate_array_len; 783 784 DynamicGDBXMLInfo dyn_sysreg_xml; 785 DynamicGDBXMLInfo dyn_svereg_xml; 786 787 /* Timers used by the generic (architected) timer */ 788 QEMUTimer *gt_timer[NUM_GTIMERS]; 789 /* 790 * Timer used by the PMU. Its state is restored after migration by 791 * pmu_op_finish() - it does not need other handling during migration 792 */ 793 QEMUTimer *pmu_timer; 794 /* GPIO outputs for generic timer */ 795 qemu_irq gt_timer_outputs[NUM_GTIMERS]; 796 /* GPIO output for GICv3 maintenance interrupt signal */ 797 qemu_irq gicv3_maintenance_interrupt; 798 /* GPIO output for the PMU interrupt */ 799 qemu_irq pmu_interrupt; 800 801 /* MemoryRegion to use for secure physical accesses */ 802 MemoryRegion *secure_memory; 803 804 /* MemoryRegion to use for allocation tag accesses */ 805 MemoryRegion *tag_memory; 806 MemoryRegion *secure_tag_memory; 807 808 /* For v8M, pointer to the IDAU interface provided by board/SoC */ 809 Object *idau; 810 811 /* 'compatible' string for this CPU for Linux device trees */ 812 const char *dtb_compatible; 813 814 /* PSCI version for this CPU 815 * Bits[31:16] = Major Version 816 * Bits[15:0] = Minor Version 817 */ 818 uint32_t psci_version; 819 820 /* Current power state, access guarded by BQL */ 821 ARMPSCIState power_state; 822 823 /* CPU has virtualization extension */ 824 bool has_el2; 825 /* CPU has security extension */ 826 bool has_el3; 827 /* CPU has PMU (Performance Monitor Unit) */ 828 bool has_pmu; 829 /* CPU has VFP */ 830 bool has_vfp; 831 /* CPU has Neon */ 832 bool has_neon; 833 /* CPU has M-profile DSP extension */ 834 bool has_dsp; 835 836 /* CPU has memory protection unit */ 837 bool has_mpu; 838 /* PMSAv7 MPU number of supported regions */ 839 uint32_t pmsav7_dregion; 840 /* v8M SAU number of supported regions */ 841 uint32_t sau_sregion; 842 843 /* PSCI conduit used to invoke PSCI methods 844 * 0 - disabled, 1 - smc, 2 - hvc 845 */ 846 uint32_t psci_conduit; 847 848 /* For v8M, initial value of the Secure VTOR */ 849 uint32_t init_svtor; 850 851 /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or 852 * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. 853 */ 854 uint32_t kvm_target; 855 856 /* KVM init features for this CPU */ 857 uint32_t kvm_init_features[7]; 858 859 /* KVM CPU state */ 860 861 /* KVM virtual time adjustment */ 862 bool kvm_adjvtime; 863 bool kvm_vtime_dirty; 864 uint64_t kvm_vtime; 865 866 /* Uniprocessor system with MP extensions */ 867 bool mp_is_up; 868 869 /* True if we tried kvm_arm_host_cpu_features() during CPU instance_init 870 * and the probe failed (so we need to report the error in realize) 871 */ 872 bool host_cpu_probe_failed; 873 874 /* Specify the number of cores in this CPU cluster. Used for the L2CTLR 875 * register. 876 */ 877 int32_t core_count; 878 879 /* The instance init functions for implementation-specific subclasses 880 * set these fields to specify the implementation-dependent values of 881 * various constant registers and reset values of non-constant 882 * registers. 883 * Some of these might become QOM properties eventually. 884 * Field names match the official register names as defined in the 885 * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix 886 * is used for reset values of non-constant registers; no reset_ 887 * prefix means a constant register. 888 * Some of these registers are split out into a substructure that 889 * is shared with the translators to control the ISA. 890 * 891 * Note that if you add an ID register to the ARMISARegisters struct 892 * you need to also update the 32-bit and 64-bit versions of the 893 * kvm_arm_get_host_cpu_features() function to correctly populate the 894 * field by reading the value from the KVM vCPU. 895 */ 896 struct ARMISARegisters { 897 uint32_t id_isar0; 898 uint32_t id_isar1; 899 uint32_t id_isar2; 900 uint32_t id_isar3; 901 uint32_t id_isar4; 902 uint32_t id_isar5; 903 uint32_t id_isar6; 904 uint32_t id_mmfr0; 905 uint32_t id_mmfr1; 906 uint32_t id_mmfr2; 907 uint32_t id_mmfr3; 908 uint32_t id_mmfr4; 909 uint32_t id_pfr0; 910 uint32_t id_pfr1; 911 uint32_t mvfr0; 912 uint32_t mvfr1; 913 uint32_t mvfr2; 914 uint32_t id_dfr0; 915 uint32_t dbgdidr; 916 uint64_t id_aa64isar0; 917 uint64_t id_aa64isar1; 918 uint64_t id_aa64pfr0; 919 uint64_t id_aa64pfr1; 920 uint64_t id_aa64mmfr0; 921 uint64_t id_aa64mmfr1; 922 uint64_t id_aa64mmfr2; 923 uint64_t id_aa64dfr0; 924 uint64_t id_aa64dfr1; 925 } isar; 926 uint64_t midr; 927 uint32_t revidr; 928 uint32_t reset_fpsid; 929 uint32_t ctr; 930 uint32_t reset_sctlr; 931 uint64_t pmceid0; 932 uint64_t pmceid1; 933 uint32_t id_afr0; 934 uint64_t id_aa64afr0; 935 uint64_t id_aa64afr1; 936 uint32_t clidr; 937 uint64_t mp_affinity; /* MP ID without feature bits */ 938 /* The elements of this array are the CCSIDR values for each cache, 939 * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc. 940 */ 941 uint64_t ccsidr[16]; 942 uint64_t reset_cbar; 943 uint32_t reset_auxcr; 944 bool reset_hivecs; 945 /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ 946 uint32_t dcz_blocksize; 947 uint64_t rvbar; 948 949 /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ 950 int gic_num_lrs; /* number of list registers */ 951 int gic_vpribits; /* number of virtual priority bits */ 952 int gic_vprebits; /* number of virtual preemption bits */ 953 954 /* Whether the cfgend input is high (i.e. this CPU should reset into 955 * big-endian mode). This setting isn't used directly: instead it modifies 956 * the reset_sctlr value to have SCTLR_B or SCTLR_EE set, depending on the 957 * architecture version. 958 */ 959 bool cfgend; 960 961 QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; 962 QLIST_HEAD(, ARMELChangeHook) el_change_hooks; 963 964 int32_t node_id; /* NUMA node this CPU belongs to */ 965 966 /* Used to synchronize KVM and QEMU in-kernel device levels */ 967 uint8_t device_irq_level; 968 969 /* Used to set the maximum vector length the cpu will support. */ 970 uint32_t sve_max_vq; 971 972 /* 973 * In sve_vq_map each set bit is a supported vector length of 974 * (bit-number + 1) * 16 bytes, i.e. each bit number + 1 is the vector 975 * length in quadwords. 976 * 977 * While processing properties during initialization, corresponding 978 * sve_vq_init bits are set for bits in sve_vq_map that have been 979 * set by properties. 980 */ 981 DECLARE_BITMAP(sve_vq_map, ARM_MAX_VQ); 982 DECLARE_BITMAP(sve_vq_init, ARM_MAX_VQ); 983 984 /* Generic timer counter frequency, in Hz */ 985 uint64_t gt_cntfrq_hz; 986 }; 987 988 unsigned int gt_cntfrq_period_ns(ARMCPU *cpu); 989 990 void arm_cpu_post_init(Object *obj); 991 992 uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz); 993 994 #ifndef CONFIG_USER_ONLY 995 extern const VMStateDescription vmstate_arm_cpu; 996 #endif 997 998 void arm_cpu_do_interrupt(CPUState *cpu); 999 void arm_v7m_cpu_do_interrupt(CPUState *cpu); 1000 bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req); 1001 1002 hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr, 1003 MemTxAttrs *attrs); 1004 1005 int arm_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); 1006 int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); 1007 1008 /* 1009 * Helpers to dynamically generates XML descriptions of the sysregs 1010 * and SVE registers. Returns the number of registers in each set. 1011 */ 1012 int arm_gen_dynamic_sysreg_xml(CPUState *cpu, int base_reg); 1013 int arm_gen_dynamic_svereg_xml(CPUState *cpu, int base_reg); 1014 1015 /* Returns the dynamically generated XML for the gdb stub. 1016 * Returns a pointer to the XML contents for the specified XML file or NULL 1017 * if the XML name doesn't match the predefined one. 1018 */ 1019 const char *arm_gdb_get_dynamic_xml(CPUState *cpu, const char *xmlname); 1020 1021 int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs, 1022 int cpuid, void *opaque); 1023 int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs, 1024 int cpuid, void *opaque); 1025 1026 #ifdef TARGET_AARCH64 1027 int aarch64_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); 1028 int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); 1029 void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq); 1030 void aarch64_sve_change_el(CPUARMState *env, int old_el, 1031 int new_el, bool el0_a64); 1032 void aarch64_add_sve_properties(Object *obj); 1033 1034 /* 1035 * SVE registers are encoded in KVM's memory in an endianness-invariant format. 1036 * The byte at offset i from the start of the in-memory representation contains 1037 * the bits [(7 + 8 * i) : (8 * i)] of the register value. As this means the 1038 * lowest offsets are stored in the lowest memory addresses, then that nearly 1039 * matches QEMU's representation, which is to use an array of host-endian 1040 * uint64_t's, where the lower offsets are at the lower indices. To complete 1041 * the translation we just need to byte swap the uint64_t's on big-endian hosts. 1042 */ 1043 static inline uint64_t *sve_bswap64(uint64_t *dst, uint64_t *src, int nr) 1044 { 1045 #ifdef HOST_WORDS_BIGENDIAN 1046 int i; 1047 1048 for (i = 0; i < nr; ++i) { 1049 dst[i] = bswap64(src[i]); 1050 } 1051 1052 return dst; 1053 #else 1054 return src; 1055 #endif 1056 } 1057 1058 #else 1059 static inline void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) { } 1060 static inline void aarch64_sve_change_el(CPUARMState *env, int o, 1061 int n, bool a) 1062 { } 1063 static inline void aarch64_add_sve_properties(Object *obj) { } 1064 #endif 1065 1066 #if !defined(CONFIG_TCG) 1067 static inline target_ulong do_arm_semihosting(CPUARMState *env) 1068 { 1069 g_assert_not_reached(); 1070 } 1071 #else 1072 target_ulong do_arm_semihosting(CPUARMState *env); 1073 #endif 1074 void aarch64_sync_32_to_64(CPUARMState *env); 1075 void aarch64_sync_64_to_32(CPUARMState *env); 1076 1077 int fp_exception_el(CPUARMState *env, int cur_el); 1078 int sve_exception_el(CPUARMState *env, int cur_el); 1079 uint32_t sve_zcr_len_for_el(CPUARMState *env, int el); 1080 1081 static inline bool is_a64(CPUARMState *env) 1082 { 1083 return env->aarch64; 1084 } 1085 1086 /* you can call this signal handler from your SIGBUS and SIGSEGV 1087 signal handlers to inform the virtual CPU of exceptions. non zero 1088 is returned if the signal was handled by the virtual CPU. */ 1089 int cpu_arm_signal_handler(int host_signum, void *pinfo, 1090 void *puc); 1091 1092 /** 1093 * pmu_op_start/finish 1094 * @env: CPUARMState 1095 * 1096 * Convert all PMU counters between their delta form (the typical mode when 1097 * they are enabled) and the guest-visible values. These two calls must 1098 * surround any action which might affect the counters. 1099 */ 1100 void pmu_op_start(CPUARMState *env); 1101 void pmu_op_finish(CPUARMState *env); 1102 1103 /* 1104 * Called when a PMU counter is due to overflow 1105 */ 1106 void arm_pmu_timer_cb(void *opaque); 1107 1108 /** 1109 * Functions to register as EL change hooks for PMU mode filtering 1110 */ 1111 void pmu_pre_el_change(ARMCPU *cpu, void *ignored); 1112 void pmu_post_el_change(ARMCPU *cpu, void *ignored); 1113 1114 /* 1115 * pmu_init 1116 * @cpu: ARMCPU 1117 * 1118 * Initialize the CPU's PMCEID[01]_EL0 registers and associated internal state 1119 * for the current configuration 1120 */ 1121 void pmu_init(ARMCPU *cpu); 1122 1123 /* SCTLR bit meanings. Several bits have been reused in newer 1124 * versions of the architecture; in that case we define constants 1125 * for both old and new bit meanings. Code which tests against those 1126 * bits should probably check or otherwise arrange that the CPU 1127 * is the architectural version it expects. 1128 */ 1129 #define SCTLR_M (1U << 0) 1130 #define SCTLR_A (1U << 1) 1131 #define SCTLR_C (1U << 2) 1132 #define SCTLR_W (1U << 3) /* up to v6; RAO in v7 */ 1133 #define SCTLR_nTLSMD_32 (1U << 3) /* v8.2-LSMAOC, AArch32 only */ 1134 #define SCTLR_SA (1U << 3) /* AArch64 only */ 1135 #define SCTLR_P (1U << 4) /* up to v5; RAO in v6 and v7 */ 1136 #define SCTLR_LSMAOE_32 (1U << 4) /* v8.2-LSMAOC, AArch32 only */ 1137 #define SCTLR_SA0 (1U << 4) /* v8 onward, AArch64 only */ 1138 #define SCTLR_D (1U << 5) /* up to v5; RAO in v6 */ 1139 #define SCTLR_CP15BEN (1U << 5) /* v7 onward */ 1140 #define SCTLR_L (1U << 6) /* up to v5; RAO in v6 and v7; RAZ in v8 */ 1141 #define SCTLR_nAA (1U << 6) /* when v8.4-LSE is implemented */ 1142 #define SCTLR_B (1U << 7) /* up to v6; RAZ in v7 */ 1143 #define SCTLR_ITD (1U << 7) /* v8 onward */ 1144 #define SCTLR_S (1U << 8) /* up to v6; RAZ in v7 */ 1145 #define SCTLR_SED (1U << 8) /* v8 onward */ 1146 #define SCTLR_R (1U << 9) /* up to v6; RAZ in v7 */ 1147 #define SCTLR_UMA (1U << 9) /* v8 onward, AArch64 only */ 1148 #define SCTLR_F (1U << 10) /* up to v6 */ 1149 #define SCTLR_SW (1U << 10) /* v7 */ 1150 #define SCTLR_EnRCTX (1U << 10) /* in v8.0-PredInv */ 1151 #define SCTLR_Z (1U << 11) /* in v7, RES1 in v8 */ 1152 #define SCTLR_EOS (1U << 11) /* v8.5-ExS */ 1153 #define SCTLR_I (1U << 12) 1154 #define SCTLR_V (1U << 13) /* AArch32 only */ 1155 #define SCTLR_EnDB (1U << 13) /* v8.3, AArch64 only */ 1156 #define SCTLR_RR (1U << 14) /* up to v7 */ 1157 #define SCTLR_DZE (1U << 14) /* v8 onward, AArch64 only */ 1158 #define SCTLR_L4 (1U << 15) /* up to v6; RAZ in v7 */ 1159 #define SCTLR_UCT (1U << 15) /* v8 onward, AArch64 only */ 1160 #define SCTLR_DT (1U << 16) /* up to ??, RAO in v6 and v7 */ 1161 #define SCTLR_nTWI (1U << 16) /* v8 onward */ 1162 #define SCTLR_HA (1U << 17) /* up to v7, RES0 in v8 */ 1163 #define SCTLR_BR (1U << 17) /* PMSA only */ 1164 #define SCTLR_IT (1U << 18) /* up to ??, RAO in v6 and v7 */ 1165 #define SCTLR_nTWE (1U << 18) /* v8 onward */ 1166 #define SCTLR_WXN (1U << 19) 1167 #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ 1168 #define SCTLR_UWXN (1U << 20) /* v7 onward, AArch32 only */ 1169 #define SCTLR_FI (1U << 21) /* up to v7, v8 RES0 */ 1170 #define SCTLR_IESB (1U << 21) /* v8.2-IESB, AArch64 only */ 1171 #define SCTLR_U (1U << 22) /* up to v6, RAO in v7 */ 1172 #define SCTLR_EIS (1U << 22) /* v8.5-ExS */ 1173 #define SCTLR_XP (1U << 23) /* up to v6; v7 onward RAO */ 1174 #define SCTLR_SPAN (1U << 23) /* v8.1-PAN */ 1175 #define SCTLR_VE (1U << 24) /* up to v7 */ 1176 #define SCTLR_E0E (1U << 24) /* v8 onward, AArch64 only */ 1177 #define SCTLR_EE (1U << 25) 1178 #define SCTLR_L2 (1U << 26) /* up to v6, RAZ in v7 */ 1179 #define SCTLR_UCI (1U << 26) /* v8 onward, AArch64 only */ 1180 #define SCTLR_NMFI (1U << 27) /* up to v7, RAZ in v7VE and v8 */ 1181 #define SCTLR_EnDA (1U << 27) /* v8.3, AArch64 only */ 1182 #define SCTLR_TRE (1U << 28) /* AArch32 only */ 1183 #define SCTLR_nTLSMD_64 (1U << 28) /* v8.2-LSMAOC, AArch64 only */ 1184 #define SCTLR_AFE (1U << 29) /* AArch32 only */ 1185 #define SCTLR_LSMAOE_64 (1U << 29) /* v8.2-LSMAOC, AArch64 only */ 1186 #define SCTLR_TE (1U << 30) /* AArch32 only */ 1187 #define SCTLR_EnIB (1U << 30) /* v8.3, AArch64 only */ 1188 #define SCTLR_EnIA (1U << 31) /* v8.3, AArch64 only */ 1189 #define SCTLR_BT0 (1ULL << 35) /* v8.5-BTI */ 1190 #define SCTLR_BT1 (1ULL << 36) /* v8.5-BTI */ 1191 #define SCTLR_ITFSB (1ULL << 37) /* v8.5-MemTag */ 1192 #define SCTLR_TCF0 (3ULL << 38) /* v8.5-MemTag */ 1193 #define SCTLR_TCF (3ULL << 40) /* v8.5-MemTag */ 1194 #define SCTLR_ATA0 (1ULL << 42) /* v8.5-MemTag */ 1195 #define SCTLR_ATA (1ULL << 43) /* v8.5-MemTag */ 1196 #define SCTLR_DSSBS (1ULL << 44) /* v8.5 */ 1197 1198 #define CPTR_TCPAC (1U << 31) 1199 #define CPTR_TTA (1U << 20) 1200 #define CPTR_TFP (1U << 10) 1201 #define CPTR_TZ (1U << 8) /* CPTR_EL2 */ 1202 #define CPTR_EZ (1U << 8) /* CPTR_EL3 */ 1203 1204 #define MDCR_EPMAD (1U << 21) 1205 #define MDCR_EDAD (1U << 20) 1206 #define MDCR_SPME (1U << 17) /* MDCR_EL3 */ 1207 #define MDCR_HPMD (1U << 17) /* MDCR_EL2 */ 1208 #define MDCR_SDD (1U << 16) 1209 #define MDCR_SPD (3U << 14) 1210 #define MDCR_TDRA (1U << 11) 1211 #define MDCR_TDOSA (1U << 10) 1212 #define MDCR_TDA (1U << 9) 1213 #define MDCR_TDE (1U << 8) 1214 #define MDCR_HPME (1U << 7) 1215 #define MDCR_TPM (1U << 6) 1216 #define MDCR_TPMCR (1U << 5) 1217 #define MDCR_HPMN (0x1fU) 1218 1219 /* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */ 1220 #define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD) 1221 1222 #define CPSR_M (0x1fU) 1223 #define CPSR_T (1U << 5) 1224 #define CPSR_F (1U << 6) 1225 #define CPSR_I (1U << 7) 1226 #define CPSR_A (1U << 8) 1227 #define CPSR_E (1U << 9) 1228 #define CPSR_IT_2_7 (0xfc00U) 1229 #define CPSR_GE (0xfU << 16) 1230 #define CPSR_IL (1U << 20) 1231 #define CPSR_PAN (1U << 22) 1232 #define CPSR_J (1U << 24) 1233 #define CPSR_IT_0_1 (3U << 25) 1234 #define CPSR_Q (1U << 27) 1235 #define CPSR_V (1U << 28) 1236 #define CPSR_C (1U << 29) 1237 #define CPSR_Z (1U << 30) 1238 #define CPSR_N (1U << 31) 1239 #define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V) 1240 #define CPSR_AIF (CPSR_A | CPSR_I | CPSR_F) 1241 1242 #define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7) 1243 #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ 1244 | CPSR_NZCV) 1245 /* Bits writable in user mode. */ 1246 #define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE | CPSR_E) 1247 /* Execution state bits. MRS read as zero, MSR writes ignored. */ 1248 #define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J | CPSR_IL) 1249 1250 /* Bit definitions for M profile XPSR. Most are the same as CPSR. */ 1251 #define XPSR_EXCP 0x1ffU 1252 #define XPSR_SPREALIGN (1U << 9) /* Only set in exception stack frames */ 1253 #define XPSR_IT_2_7 CPSR_IT_2_7 1254 #define XPSR_GE CPSR_GE 1255 #define XPSR_SFPA (1U << 20) /* Only set in exception stack frames */ 1256 #define XPSR_T (1U << 24) /* Not the same as CPSR_T ! */ 1257 #define XPSR_IT_0_1 CPSR_IT_0_1 1258 #define XPSR_Q CPSR_Q 1259 #define XPSR_V CPSR_V 1260 #define XPSR_C CPSR_C 1261 #define XPSR_Z CPSR_Z 1262 #define XPSR_N CPSR_N 1263 #define XPSR_NZCV CPSR_NZCV 1264 #define XPSR_IT CPSR_IT 1265 1266 #define TTBCR_N (7U << 0) /* TTBCR.EAE==0 */ 1267 #define TTBCR_T0SZ (7U << 0) /* TTBCR.EAE==1 */ 1268 #define TTBCR_PD0 (1U << 4) 1269 #define TTBCR_PD1 (1U << 5) 1270 #define TTBCR_EPD0 (1U << 7) 1271 #define TTBCR_IRGN0 (3U << 8) 1272 #define TTBCR_ORGN0 (3U << 10) 1273 #define TTBCR_SH0 (3U << 12) 1274 #define TTBCR_T1SZ (3U << 16) 1275 #define TTBCR_A1 (1U << 22) 1276 #define TTBCR_EPD1 (1U << 23) 1277 #define TTBCR_IRGN1 (3U << 24) 1278 #define TTBCR_ORGN1 (3U << 26) 1279 #define TTBCR_SH1 (1U << 28) 1280 #define TTBCR_EAE (1U << 31) 1281 1282 /* Bit definitions for ARMv8 SPSR (PSTATE) format. 1283 * Only these are valid when in AArch64 mode; in 1284 * AArch32 mode SPSRs are basically CPSR-format. 1285 */ 1286 #define PSTATE_SP (1U) 1287 #define PSTATE_M (0xFU) 1288 #define PSTATE_nRW (1U << 4) 1289 #define PSTATE_F (1U << 6) 1290 #define PSTATE_I (1U << 7) 1291 #define PSTATE_A (1U << 8) 1292 #define PSTATE_D (1U << 9) 1293 #define PSTATE_BTYPE (3U << 10) 1294 #define PSTATE_IL (1U << 20) 1295 #define PSTATE_SS (1U << 21) 1296 #define PSTATE_PAN (1U << 22) 1297 #define PSTATE_UAO (1U << 23) 1298 #define PSTATE_TCO (1U << 25) 1299 #define PSTATE_V (1U << 28) 1300 #define PSTATE_C (1U << 29) 1301 #define PSTATE_Z (1U << 30) 1302 #define PSTATE_N (1U << 31) 1303 #define PSTATE_NZCV (PSTATE_N | PSTATE_Z | PSTATE_C | PSTATE_V) 1304 #define PSTATE_DAIF (PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F) 1305 #define CACHED_PSTATE_BITS (PSTATE_NZCV | PSTATE_DAIF | PSTATE_BTYPE) 1306 /* Mode values for AArch64 */ 1307 #define PSTATE_MODE_EL3h 13 1308 #define PSTATE_MODE_EL3t 12 1309 #define PSTATE_MODE_EL2h 9 1310 #define PSTATE_MODE_EL2t 8 1311 #define PSTATE_MODE_EL1h 5 1312 #define PSTATE_MODE_EL1t 4 1313 #define PSTATE_MODE_EL0t 0 1314 1315 /* Write a new value to v7m.exception, thus transitioning into or out 1316 * of Handler mode; this may result in a change of active stack pointer. 1317 */ 1318 void write_v7m_exception(CPUARMState *env, uint32_t new_exc); 1319 1320 /* Map EL and handler into a PSTATE_MODE. */ 1321 static inline unsigned int aarch64_pstate_mode(unsigned int el, bool handler) 1322 { 1323 return (el << 2) | handler; 1324 } 1325 1326 /* Return the current PSTATE value. For the moment we don't support 32<->64 bit 1327 * interprocessing, so we don't attempt to sync with the cpsr state used by 1328 * the 32 bit decoder. 1329 */ 1330 static inline uint32_t pstate_read(CPUARMState *env) 1331 { 1332 int ZF; 1333 1334 ZF = (env->ZF == 0); 1335 return (env->NF & 0x80000000) | (ZF << 30) 1336 | (env->CF << 29) | ((env->VF & 0x80000000) >> 3) 1337 | env->pstate | env->daif | (env->btype << 10); 1338 } 1339 1340 static inline void pstate_write(CPUARMState *env, uint32_t val) 1341 { 1342 env->ZF = (~val) & PSTATE_Z; 1343 env->NF = val; 1344 env->CF = (val >> 29) & 1; 1345 env->VF = (val << 3) & 0x80000000; 1346 env->daif = val & PSTATE_DAIF; 1347 env->btype = (val >> 10) & 3; 1348 env->pstate = val & ~CACHED_PSTATE_BITS; 1349 } 1350 1351 /* Return the current CPSR value. */ 1352 uint32_t cpsr_read(CPUARMState *env); 1353 1354 typedef enum CPSRWriteType { 1355 CPSRWriteByInstr = 0, /* from guest MSR or CPS */ 1356 CPSRWriteExceptionReturn = 1, /* from guest exception return insn */ 1357 CPSRWriteRaw = 2, /* trust values, do not switch reg banks */ 1358 CPSRWriteByGDBStub = 3, /* from the GDB stub */ 1359 } CPSRWriteType; 1360 1361 /* Set the CPSR. Note that some bits of mask must be all-set or all-clear.*/ 1362 void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, 1363 CPSRWriteType write_type); 1364 1365 /* Return the current xPSR value. */ 1366 static inline uint32_t xpsr_read(CPUARMState *env) 1367 { 1368 int ZF; 1369 ZF = (env->ZF == 0); 1370 return (env->NF & 0x80000000) | (ZF << 30) 1371 | (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27) 1372 | (env->thumb << 24) | ((env->condexec_bits & 3) << 25) 1373 | ((env->condexec_bits & 0xfc) << 8) 1374 | (env->GE << 16) 1375 | env->v7m.exception; 1376 } 1377 1378 /* Set the xPSR. Note that some bits of mask must be all-set or all-clear. */ 1379 static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) 1380 { 1381 if (mask & XPSR_NZCV) { 1382 env->ZF = (~val) & XPSR_Z; 1383 env->NF = val; 1384 env->CF = (val >> 29) & 1; 1385 env->VF = (val << 3) & 0x80000000; 1386 } 1387 if (mask & XPSR_Q) { 1388 env->QF = ((val & XPSR_Q) != 0); 1389 } 1390 if (mask & XPSR_GE) { 1391 env->GE = (val & XPSR_GE) >> 16; 1392 } 1393 #ifndef CONFIG_USER_ONLY 1394 if (mask & XPSR_T) { 1395 env->thumb = ((val & XPSR_T) != 0); 1396 } 1397 if (mask & XPSR_IT_0_1) { 1398 env->condexec_bits &= ~3; 1399 env->condexec_bits |= (val >> 25) & 3; 1400 } 1401 if (mask & XPSR_IT_2_7) { 1402 env->condexec_bits &= 3; 1403 env->condexec_bits |= (val >> 8) & 0xfc; 1404 } 1405 if (mask & XPSR_EXCP) { 1406 /* Note that this only happens on exception exit */ 1407 write_v7m_exception(env, val & XPSR_EXCP); 1408 } 1409 #endif 1410 } 1411 1412 #define HCR_VM (1ULL << 0) 1413 #define HCR_SWIO (1ULL << 1) 1414 #define HCR_PTW (1ULL << 2) 1415 #define HCR_FMO (1ULL << 3) 1416 #define HCR_IMO (1ULL << 4) 1417 #define HCR_AMO (1ULL << 5) 1418 #define HCR_VF (1ULL << 6) 1419 #define HCR_VI (1ULL << 7) 1420 #define HCR_VSE (1ULL << 8) 1421 #define HCR_FB (1ULL << 9) 1422 #define HCR_BSU_MASK (3ULL << 10) 1423 #define HCR_DC (1ULL << 12) 1424 #define HCR_TWI (1ULL << 13) 1425 #define HCR_TWE (1ULL << 14) 1426 #define HCR_TID0 (1ULL << 15) 1427 #define HCR_TID1 (1ULL << 16) 1428 #define HCR_TID2 (1ULL << 17) 1429 #define HCR_TID3 (1ULL << 18) 1430 #define HCR_TSC (1ULL << 19) 1431 #define HCR_TIDCP (1ULL << 20) 1432 #define HCR_TACR (1ULL << 21) 1433 #define HCR_TSW (1ULL << 22) 1434 #define HCR_TPCP (1ULL << 23) 1435 #define HCR_TPU (1ULL << 24) 1436 #define HCR_TTLB (1ULL << 25) 1437 #define HCR_TVM (1ULL << 26) 1438 #define HCR_TGE (1ULL << 27) 1439 #define HCR_TDZ (1ULL << 28) 1440 #define HCR_HCD (1ULL << 29) 1441 #define HCR_TRVM (1ULL << 30) 1442 #define HCR_RW (1ULL << 31) 1443 #define HCR_CD (1ULL << 32) 1444 #define HCR_ID (1ULL << 33) 1445 #define HCR_E2H (1ULL << 34) 1446 #define HCR_TLOR (1ULL << 35) 1447 #define HCR_TERR (1ULL << 36) 1448 #define HCR_TEA (1ULL << 37) 1449 #define HCR_MIOCNCE (1ULL << 38) 1450 /* RES0 bit 39 */ 1451 #define HCR_APK (1ULL << 40) 1452 #define HCR_API (1ULL << 41) 1453 #define HCR_NV (1ULL << 42) 1454 #define HCR_NV1 (1ULL << 43) 1455 #define HCR_AT (1ULL << 44) 1456 #define HCR_NV2 (1ULL << 45) 1457 #define HCR_FWB (1ULL << 46) 1458 #define HCR_FIEN (1ULL << 47) 1459 /* RES0 bit 48 */ 1460 #define HCR_TID4 (1ULL << 49) 1461 #define HCR_TICAB (1ULL << 50) 1462 #define HCR_AMVOFFEN (1ULL << 51) 1463 #define HCR_TOCU (1ULL << 52) 1464 #define HCR_ENSCXT (1ULL << 53) 1465 #define HCR_TTLBIS (1ULL << 54) 1466 #define HCR_TTLBOS (1ULL << 55) 1467 #define HCR_ATA (1ULL << 56) 1468 #define HCR_DCT (1ULL << 57) 1469 #define HCR_TID5 (1ULL << 58) 1470 #define HCR_TWEDEN (1ULL << 59) 1471 #define HCR_TWEDEL MAKE_64BIT_MASK(60, 4) 1472 1473 #define SCR_NS (1U << 0) 1474 #define SCR_IRQ (1U << 1) 1475 #define SCR_FIQ (1U << 2) 1476 #define SCR_EA (1U << 3) 1477 #define SCR_FW (1U << 4) 1478 #define SCR_AW (1U << 5) 1479 #define SCR_NET (1U << 6) 1480 #define SCR_SMD (1U << 7) 1481 #define SCR_HCE (1U << 8) 1482 #define SCR_SIF (1U << 9) 1483 #define SCR_RW (1U << 10) 1484 #define SCR_ST (1U << 11) 1485 #define SCR_TWI (1U << 12) 1486 #define SCR_TWE (1U << 13) 1487 #define SCR_TLOR (1U << 14) 1488 #define SCR_TERR (1U << 15) 1489 #define SCR_APK (1U << 16) 1490 #define SCR_API (1U << 17) 1491 #define SCR_EEL2 (1U << 18) 1492 #define SCR_EASE (1U << 19) 1493 #define SCR_NMEA (1U << 20) 1494 #define SCR_FIEN (1U << 21) 1495 #define SCR_ENSCXT (1U << 25) 1496 #define SCR_ATA (1U << 26) 1497 1498 /* Return the current FPSCR value. */ 1499 uint32_t vfp_get_fpscr(CPUARMState *env); 1500 void vfp_set_fpscr(CPUARMState *env, uint32_t val); 1501 1502 /* FPCR, Floating Point Control Register 1503 * FPSR, Floating Poiht Status Register 1504 * 1505 * For A64 the FPSCR is split into two logically distinct registers, 1506 * FPCR and FPSR. However since they still use non-overlapping bits 1507 * we store the underlying state in fpscr and just mask on read/write. 1508 */ 1509 #define FPSR_MASK 0xf800009f 1510 #define FPCR_MASK 0x07ff9f00 1511 1512 #define FPCR_IOE (1 << 8) /* Invalid Operation exception trap enable */ 1513 #define FPCR_DZE (1 << 9) /* Divide by Zero exception trap enable */ 1514 #define FPCR_OFE (1 << 10) /* Overflow exception trap enable */ 1515 #define FPCR_UFE (1 << 11) /* Underflow exception trap enable */ 1516 #define FPCR_IXE (1 << 12) /* Inexact exception trap enable */ 1517 #define FPCR_IDE (1 << 15) /* Input Denormal exception trap enable */ 1518 #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ 1519 #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ 1520 #define FPCR_DN (1 << 25) /* Default NaN enable bit */ 1521 #define FPCR_QC (1 << 27) /* Cumulative saturation bit */ 1522 1523 static inline uint32_t vfp_get_fpsr(CPUARMState *env) 1524 { 1525 return vfp_get_fpscr(env) & FPSR_MASK; 1526 } 1527 1528 static inline void vfp_set_fpsr(CPUARMState *env, uint32_t val) 1529 { 1530 uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPSR_MASK) | (val & FPSR_MASK); 1531 vfp_set_fpscr(env, new_fpscr); 1532 } 1533 1534 static inline uint32_t vfp_get_fpcr(CPUARMState *env) 1535 { 1536 return vfp_get_fpscr(env) & FPCR_MASK; 1537 } 1538 1539 static inline void vfp_set_fpcr(CPUARMState *env, uint32_t val) 1540 { 1541 uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPCR_MASK) | (val & FPCR_MASK); 1542 vfp_set_fpscr(env, new_fpscr); 1543 } 1544 1545 enum arm_cpu_mode { 1546 ARM_CPU_MODE_USR = 0x10, 1547 ARM_CPU_MODE_FIQ = 0x11, 1548 ARM_CPU_MODE_IRQ = 0x12, 1549 ARM_CPU_MODE_SVC = 0x13, 1550 ARM_CPU_MODE_MON = 0x16, 1551 ARM_CPU_MODE_ABT = 0x17, 1552 ARM_CPU_MODE_HYP = 0x1a, 1553 ARM_CPU_MODE_UND = 0x1b, 1554 ARM_CPU_MODE_SYS = 0x1f 1555 }; 1556 1557 /* VFP system registers. */ 1558 #define ARM_VFP_FPSID 0 1559 #define ARM_VFP_FPSCR 1 1560 #define ARM_VFP_MVFR2 5 1561 #define ARM_VFP_MVFR1 6 1562 #define ARM_VFP_MVFR0 7 1563 #define ARM_VFP_FPEXC 8 1564 #define ARM_VFP_FPINST 9 1565 #define ARM_VFP_FPINST2 10 1566 1567 /* iwMMXt coprocessor control registers. */ 1568 #define ARM_IWMMXT_wCID 0 1569 #define ARM_IWMMXT_wCon 1 1570 #define ARM_IWMMXT_wCSSF 2 1571 #define ARM_IWMMXT_wCASF 3 1572 #define ARM_IWMMXT_wCGR0 8 1573 #define ARM_IWMMXT_wCGR1 9 1574 #define ARM_IWMMXT_wCGR2 10 1575 #define ARM_IWMMXT_wCGR3 11 1576 1577 /* V7M CCR bits */ 1578 FIELD(V7M_CCR, NONBASETHRDENA, 0, 1) 1579 FIELD(V7M_CCR, USERSETMPEND, 1, 1) 1580 FIELD(V7M_CCR, UNALIGN_TRP, 3, 1) 1581 FIELD(V7M_CCR, DIV_0_TRP, 4, 1) 1582 FIELD(V7M_CCR, BFHFNMIGN, 8, 1) 1583 FIELD(V7M_CCR, STKALIGN, 9, 1) 1584 FIELD(V7M_CCR, STKOFHFNMIGN, 10, 1) 1585 FIELD(V7M_CCR, DC, 16, 1) 1586 FIELD(V7M_CCR, IC, 17, 1) 1587 FIELD(V7M_CCR, BP, 18, 1) 1588 1589 /* V7M SCR bits */ 1590 FIELD(V7M_SCR, SLEEPONEXIT, 1, 1) 1591 FIELD(V7M_SCR, SLEEPDEEP, 2, 1) 1592 FIELD(V7M_SCR, SLEEPDEEPS, 3, 1) 1593 FIELD(V7M_SCR, SEVONPEND, 4, 1) 1594 1595 /* V7M AIRCR bits */ 1596 FIELD(V7M_AIRCR, VECTRESET, 0, 1) 1597 FIELD(V7M_AIRCR, VECTCLRACTIVE, 1, 1) 1598 FIELD(V7M_AIRCR, SYSRESETREQ, 2, 1) 1599 FIELD(V7M_AIRCR, SYSRESETREQS, 3, 1) 1600 FIELD(V7M_AIRCR, PRIGROUP, 8, 3) 1601 FIELD(V7M_AIRCR, BFHFNMINS, 13, 1) 1602 FIELD(V7M_AIRCR, PRIS, 14, 1) 1603 FIELD(V7M_AIRCR, ENDIANNESS, 15, 1) 1604 FIELD(V7M_AIRCR, VECTKEY, 16, 16) 1605 1606 /* V7M CFSR bits for MMFSR */ 1607 FIELD(V7M_CFSR, IACCVIOL, 0, 1) 1608 FIELD(V7M_CFSR, DACCVIOL, 1, 1) 1609 FIELD(V7M_CFSR, MUNSTKERR, 3, 1) 1610 FIELD(V7M_CFSR, MSTKERR, 4, 1) 1611 FIELD(V7M_CFSR, MLSPERR, 5, 1) 1612 FIELD(V7M_CFSR, MMARVALID, 7, 1) 1613 1614 /* V7M CFSR bits for BFSR */ 1615 FIELD(V7M_CFSR, IBUSERR, 8 + 0, 1) 1616 FIELD(V7M_CFSR, PRECISERR, 8 + 1, 1) 1617 FIELD(V7M_CFSR, IMPRECISERR, 8 + 2, 1) 1618 FIELD(V7M_CFSR, UNSTKERR, 8 + 3, 1) 1619 FIELD(V7M_CFSR, STKERR, 8 + 4, 1) 1620 FIELD(V7M_CFSR, LSPERR, 8 + 5, 1) 1621 FIELD(V7M_CFSR, BFARVALID, 8 + 7, 1) 1622 1623 /* V7M CFSR bits for UFSR */ 1624 FIELD(V7M_CFSR, UNDEFINSTR, 16 + 0, 1) 1625 FIELD(V7M_CFSR, INVSTATE, 16 + 1, 1) 1626 FIELD(V7M_CFSR, INVPC, 16 + 2, 1) 1627 FIELD(V7M_CFSR, NOCP, 16 + 3, 1) 1628 FIELD(V7M_CFSR, STKOF, 16 + 4, 1) 1629 FIELD(V7M_CFSR, UNALIGNED, 16 + 8, 1) 1630 FIELD(V7M_CFSR, DIVBYZERO, 16 + 9, 1) 1631 1632 /* V7M CFSR bit masks covering all of the subregister bits */ 1633 FIELD(V7M_CFSR, MMFSR, 0, 8) 1634 FIELD(V7M_CFSR, BFSR, 8, 8) 1635 FIELD(V7M_CFSR, UFSR, 16, 16) 1636 1637 /* V7M HFSR bits */ 1638 FIELD(V7M_HFSR, VECTTBL, 1, 1) 1639 FIELD(V7M_HFSR, FORCED, 30, 1) 1640 FIELD(V7M_HFSR, DEBUGEVT, 31, 1) 1641 1642 /* V7M DFSR bits */ 1643 FIELD(V7M_DFSR, HALTED, 0, 1) 1644 FIELD(V7M_DFSR, BKPT, 1, 1) 1645 FIELD(V7M_DFSR, DWTTRAP, 2, 1) 1646 FIELD(V7M_DFSR, VCATCH, 3, 1) 1647 FIELD(V7M_DFSR, EXTERNAL, 4, 1) 1648 1649 /* V7M SFSR bits */ 1650 FIELD(V7M_SFSR, INVEP, 0, 1) 1651 FIELD(V7M_SFSR, INVIS, 1, 1) 1652 FIELD(V7M_SFSR, INVER, 2, 1) 1653 FIELD(V7M_SFSR, AUVIOL, 3, 1) 1654 FIELD(V7M_SFSR, INVTRAN, 4, 1) 1655 FIELD(V7M_SFSR, LSPERR, 5, 1) 1656 FIELD(V7M_SFSR, SFARVALID, 6, 1) 1657 FIELD(V7M_SFSR, LSERR, 7, 1) 1658 1659 /* v7M MPU_CTRL bits */ 1660 FIELD(V7M_MPU_CTRL, ENABLE, 0, 1) 1661 FIELD(V7M_MPU_CTRL, HFNMIENA, 1, 1) 1662 FIELD(V7M_MPU_CTRL, PRIVDEFENA, 2, 1) 1663 1664 /* v7M CLIDR bits */ 1665 FIELD(V7M_CLIDR, CTYPE_ALL, 0, 21) 1666 FIELD(V7M_CLIDR, LOUIS, 21, 3) 1667 FIELD(V7M_CLIDR, LOC, 24, 3) 1668 FIELD(V7M_CLIDR, LOUU, 27, 3) 1669 FIELD(V7M_CLIDR, ICB, 30, 2) 1670 1671 FIELD(V7M_CSSELR, IND, 0, 1) 1672 FIELD(V7M_CSSELR, LEVEL, 1, 3) 1673 /* We use the combination of InD and Level to index into cpu->ccsidr[]; 1674 * define a mask for this and check that it doesn't permit running off 1675 * the end of the array. 1676 */ 1677 FIELD(V7M_CSSELR, INDEX, 0, 4) 1678 1679 /* v7M FPCCR bits */ 1680 FIELD(V7M_FPCCR, LSPACT, 0, 1) 1681 FIELD(V7M_FPCCR, USER, 1, 1) 1682 FIELD(V7M_FPCCR, S, 2, 1) 1683 FIELD(V7M_FPCCR, THREAD, 3, 1) 1684 FIELD(V7M_FPCCR, HFRDY, 4, 1) 1685 FIELD(V7M_FPCCR, MMRDY, 5, 1) 1686 FIELD(V7M_FPCCR, BFRDY, 6, 1) 1687 FIELD(V7M_FPCCR, SFRDY, 7, 1) 1688 FIELD(V7M_FPCCR, MONRDY, 8, 1) 1689 FIELD(V7M_FPCCR, SPLIMVIOL, 9, 1) 1690 FIELD(V7M_FPCCR, UFRDY, 10, 1) 1691 FIELD(V7M_FPCCR, RES0, 11, 15) 1692 FIELD(V7M_FPCCR, TS, 26, 1) 1693 FIELD(V7M_FPCCR, CLRONRETS, 27, 1) 1694 FIELD(V7M_FPCCR, CLRONRET, 28, 1) 1695 FIELD(V7M_FPCCR, LSPENS, 29, 1) 1696 FIELD(V7M_FPCCR, LSPEN, 30, 1) 1697 FIELD(V7M_FPCCR, ASPEN, 31, 1) 1698 /* These bits are banked. Others are non-banked and live in the M_REG_S bank */ 1699 #define R_V7M_FPCCR_BANKED_MASK \ 1700 (R_V7M_FPCCR_LSPACT_MASK | \ 1701 R_V7M_FPCCR_USER_MASK | \ 1702 R_V7M_FPCCR_THREAD_MASK | \ 1703 R_V7M_FPCCR_MMRDY_MASK | \ 1704 R_V7M_FPCCR_SPLIMVIOL_MASK | \ 1705 R_V7M_FPCCR_UFRDY_MASK | \ 1706 R_V7M_FPCCR_ASPEN_MASK) 1707 1708 /* 1709 * System register ID fields. 1710 */ 1711 FIELD(MIDR_EL1, REVISION, 0, 4) 1712 FIELD(MIDR_EL1, PARTNUM, 4, 12) 1713 FIELD(MIDR_EL1, ARCHITECTURE, 16, 4) 1714 FIELD(MIDR_EL1, VARIANT, 20, 4) 1715 FIELD(MIDR_EL1, IMPLEMENTER, 24, 8) 1716 1717 FIELD(ID_ISAR0, SWAP, 0, 4) 1718 FIELD(ID_ISAR0, BITCOUNT, 4, 4) 1719 FIELD(ID_ISAR0, BITFIELD, 8, 4) 1720 FIELD(ID_ISAR0, CMPBRANCH, 12, 4) 1721 FIELD(ID_ISAR0, COPROC, 16, 4) 1722 FIELD(ID_ISAR0, DEBUG, 20, 4) 1723 FIELD(ID_ISAR0, DIVIDE, 24, 4) 1724 1725 FIELD(ID_ISAR1, ENDIAN, 0, 4) 1726 FIELD(ID_ISAR1, EXCEPT, 4, 4) 1727 FIELD(ID_ISAR1, EXCEPT_AR, 8, 4) 1728 FIELD(ID_ISAR1, EXTEND, 12, 4) 1729 FIELD(ID_ISAR1, IFTHEN, 16, 4) 1730 FIELD(ID_ISAR1, IMMEDIATE, 20, 4) 1731 FIELD(ID_ISAR1, INTERWORK, 24, 4) 1732 FIELD(ID_ISAR1, JAZELLE, 28, 4) 1733 1734 FIELD(ID_ISAR2, LOADSTORE, 0, 4) 1735 FIELD(ID_ISAR2, MEMHINT, 4, 4) 1736 FIELD(ID_ISAR2, MULTIACCESSINT, 8, 4) 1737 FIELD(ID_ISAR2, MULT, 12, 4) 1738 FIELD(ID_ISAR2, MULTS, 16, 4) 1739 FIELD(ID_ISAR2, MULTU, 20, 4) 1740 FIELD(ID_ISAR2, PSR_AR, 24, 4) 1741 FIELD(ID_ISAR2, REVERSAL, 28, 4) 1742 1743 FIELD(ID_ISAR3, SATURATE, 0, 4) 1744 FIELD(ID_ISAR3, SIMD, 4, 4) 1745 FIELD(ID_ISAR3, SVC, 8, 4) 1746 FIELD(ID_ISAR3, SYNCHPRIM, 12, 4) 1747 FIELD(ID_ISAR3, TABBRANCH, 16, 4) 1748 FIELD(ID_ISAR3, T32COPY, 20, 4) 1749 FIELD(ID_ISAR3, TRUENOP, 24, 4) 1750 FIELD(ID_ISAR3, T32EE, 28, 4) 1751 1752 FIELD(ID_ISAR4, UNPRIV, 0, 4) 1753 FIELD(ID_ISAR4, WITHSHIFTS, 4, 4) 1754 FIELD(ID_ISAR4, WRITEBACK, 8, 4) 1755 FIELD(ID_ISAR4, SMC, 12, 4) 1756 FIELD(ID_ISAR4, BARRIER, 16, 4) 1757 FIELD(ID_ISAR4, SYNCHPRIM_FRAC, 20, 4) 1758 FIELD(ID_ISAR4, PSR_M, 24, 4) 1759 FIELD(ID_ISAR4, SWP_FRAC, 28, 4) 1760 1761 FIELD(ID_ISAR5, SEVL, 0, 4) 1762 FIELD(ID_ISAR5, AES, 4, 4) 1763 FIELD(ID_ISAR5, SHA1, 8, 4) 1764 FIELD(ID_ISAR5, SHA2, 12, 4) 1765 FIELD(ID_ISAR5, CRC32, 16, 4) 1766 FIELD(ID_ISAR5, RDM, 24, 4) 1767 FIELD(ID_ISAR5, VCMA, 28, 4) 1768 1769 FIELD(ID_ISAR6, JSCVT, 0, 4) 1770 FIELD(ID_ISAR6, DP, 4, 4) 1771 FIELD(ID_ISAR6, FHM, 8, 4) 1772 FIELD(ID_ISAR6, SB, 12, 4) 1773 FIELD(ID_ISAR6, SPECRES, 16, 4) 1774 1775 FIELD(ID_MMFR0, VMSA, 0, 4) 1776 FIELD(ID_MMFR0, PMSA, 4, 4) 1777 FIELD(ID_MMFR0, OUTERSHR, 8, 4) 1778 FIELD(ID_MMFR0, SHARELVL, 12, 4) 1779 FIELD(ID_MMFR0, TCM, 16, 4) 1780 FIELD(ID_MMFR0, AUXREG, 20, 4) 1781 FIELD(ID_MMFR0, FCSE, 24, 4) 1782 FIELD(ID_MMFR0, INNERSHR, 28, 4) 1783 1784 FIELD(ID_MMFR3, CMAINTVA, 0, 4) 1785 FIELD(ID_MMFR3, CMAINTSW, 4, 4) 1786 FIELD(ID_MMFR3, BPMAINT, 8, 4) 1787 FIELD(ID_MMFR3, MAINTBCST, 12, 4) 1788 FIELD(ID_MMFR3, PAN, 16, 4) 1789 FIELD(ID_MMFR3, COHWALK, 20, 4) 1790 FIELD(ID_MMFR3, CMEMSZ, 24, 4) 1791 FIELD(ID_MMFR3, SUPERSEC, 28, 4) 1792 1793 FIELD(ID_MMFR4, SPECSEI, 0, 4) 1794 FIELD(ID_MMFR4, AC2, 4, 4) 1795 FIELD(ID_MMFR4, XNX, 8, 4) 1796 FIELD(ID_MMFR4, CNP, 12, 4) 1797 FIELD(ID_MMFR4, HPDS, 16, 4) 1798 FIELD(ID_MMFR4, LSM, 20, 4) 1799 FIELD(ID_MMFR4, CCIDX, 24, 4) 1800 FIELD(ID_MMFR4, EVT, 28, 4) 1801 1802 FIELD(ID_PFR1, PROGMOD, 0, 4) 1803 FIELD(ID_PFR1, SECURITY, 4, 4) 1804 FIELD(ID_PFR1, MPROGMOD, 8, 4) 1805 FIELD(ID_PFR1, VIRTUALIZATION, 12, 4) 1806 FIELD(ID_PFR1, GENTIMER, 16, 4) 1807 FIELD(ID_PFR1, SEC_FRAC, 20, 4) 1808 FIELD(ID_PFR1, VIRT_FRAC, 24, 4) 1809 FIELD(ID_PFR1, GIC, 28, 4) 1810 1811 FIELD(ID_AA64ISAR0, AES, 4, 4) 1812 FIELD(ID_AA64ISAR0, SHA1, 8, 4) 1813 FIELD(ID_AA64ISAR0, SHA2, 12, 4) 1814 FIELD(ID_AA64ISAR0, CRC32, 16, 4) 1815 FIELD(ID_AA64ISAR0, ATOMIC, 20, 4) 1816 FIELD(ID_AA64ISAR0, RDM, 28, 4) 1817 FIELD(ID_AA64ISAR0, SHA3, 32, 4) 1818 FIELD(ID_AA64ISAR0, SM3, 36, 4) 1819 FIELD(ID_AA64ISAR0, SM4, 40, 4) 1820 FIELD(ID_AA64ISAR0, DP, 44, 4) 1821 FIELD(ID_AA64ISAR0, FHM, 48, 4) 1822 FIELD(ID_AA64ISAR0, TS, 52, 4) 1823 FIELD(ID_AA64ISAR0, TLB, 56, 4) 1824 FIELD(ID_AA64ISAR0, RNDR, 60, 4) 1825 1826 FIELD(ID_AA64ISAR1, DPB, 0, 4) 1827 FIELD(ID_AA64ISAR1, APA, 4, 4) 1828 FIELD(ID_AA64ISAR1, API, 8, 4) 1829 FIELD(ID_AA64ISAR1, JSCVT, 12, 4) 1830 FIELD(ID_AA64ISAR1, FCMA, 16, 4) 1831 FIELD(ID_AA64ISAR1, LRCPC, 20, 4) 1832 FIELD(ID_AA64ISAR1, GPA, 24, 4) 1833 FIELD(ID_AA64ISAR1, GPI, 28, 4) 1834 FIELD(ID_AA64ISAR1, FRINTTS, 32, 4) 1835 FIELD(ID_AA64ISAR1, SB, 36, 4) 1836 FIELD(ID_AA64ISAR1, SPECRES, 40, 4) 1837 1838 FIELD(ID_AA64PFR0, EL0, 0, 4) 1839 FIELD(ID_AA64PFR0, EL1, 4, 4) 1840 FIELD(ID_AA64PFR0, EL2, 8, 4) 1841 FIELD(ID_AA64PFR0, EL3, 12, 4) 1842 FIELD(ID_AA64PFR0, FP, 16, 4) 1843 FIELD(ID_AA64PFR0, ADVSIMD, 20, 4) 1844 FIELD(ID_AA64PFR0, GIC, 24, 4) 1845 FIELD(ID_AA64PFR0, RAS, 28, 4) 1846 FIELD(ID_AA64PFR0, SVE, 32, 4) 1847 1848 FIELD(ID_AA64PFR1, BT, 0, 4) 1849 FIELD(ID_AA64PFR1, SBSS, 4, 4) 1850 FIELD(ID_AA64PFR1, MTE, 8, 4) 1851 FIELD(ID_AA64PFR1, RAS_FRAC, 12, 4) 1852 1853 FIELD(ID_AA64MMFR0, PARANGE, 0, 4) 1854 FIELD(ID_AA64MMFR0, ASIDBITS, 4, 4) 1855 FIELD(ID_AA64MMFR0, BIGEND, 8, 4) 1856 FIELD(ID_AA64MMFR0, SNSMEM, 12, 4) 1857 FIELD(ID_AA64MMFR0, BIGENDEL0, 16, 4) 1858 FIELD(ID_AA64MMFR0, TGRAN16, 20, 4) 1859 FIELD(ID_AA64MMFR0, TGRAN64, 24, 4) 1860 FIELD(ID_AA64MMFR0, TGRAN4, 28, 4) 1861 FIELD(ID_AA64MMFR0, TGRAN16_2, 32, 4) 1862 FIELD(ID_AA64MMFR0, TGRAN64_2, 36, 4) 1863 FIELD(ID_AA64MMFR0, TGRAN4_2, 40, 4) 1864 FIELD(ID_AA64MMFR0, EXS, 44, 4) 1865 1866 FIELD(ID_AA64MMFR1, HAFDBS, 0, 4) 1867 FIELD(ID_AA64MMFR1, VMIDBITS, 4, 4) 1868 FIELD(ID_AA64MMFR1, VH, 8, 4) 1869 FIELD(ID_AA64MMFR1, HPDS, 12, 4) 1870 FIELD(ID_AA64MMFR1, LO, 16, 4) 1871 FIELD(ID_AA64MMFR1, PAN, 20, 4) 1872 FIELD(ID_AA64MMFR1, SPECSEI, 24, 4) 1873 FIELD(ID_AA64MMFR1, XNX, 28, 4) 1874 1875 FIELD(ID_AA64MMFR2, CNP, 0, 4) 1876 FIELD(ID_AA64MMFR2, UAO, 4, 4) 1877 FIELD(ID_AA64MMFR2, LSM, 8, 4) 1878 FIELD(ID_AA64MMFR2, IESB, 12, 4) 1879 FIELD(ID_AA64MMFR2, VARANGE, 16, 4) 1880 FIELD(ID_AA64MMFR2, CCIDX, 20, 4) 1881 FIELD(ID_AA64MMFR2, NV, 24, 4) 1882 FIELD(ID_AA64MMFR2, ST, 28, 4) 1883 FIELD(ID_AA64MMFR2, AT, 32, 4) 1884 FIELD(ID_AA64MMFR2, IDS, 36, 4) 1885 FIELD(ID_AA64MMFR2, FWB, 40, 4) 1886 FIELD(ID_AA64MMFR2, TTL, 48, 4) 1887 FIELD(ID_AA64MMFR2, BBM, 52, 4) 1888 FIELD(ID_AA64MMFR2, EVT, 56, 4) 1889 FIELD(ID_AA64MMFR2, E0PD, 60, 4) 1890 1891 FIELD(ID_AA64DFR0, DEBUGVER, 0, 4) 1892 FIELD(ID_AA64DFR0, TRACEVER, 4, 4) 1893 FIELD(ID_AA64DFR0, PMUVER, 8, 4) 1894 FIELD(ID_AA64DFR0, BRPS, 12, 4) 1895 FIELD(ID_AA64DFR0, WRPS, 20, 4) 1896 FIELD(ID_AA64DFR0, CTX_CMPS, 28, 4) 1897 FIELD(ID_AA64DFR0, PMSVER, 32, 4) 1898 FIELD(ID_AA64DFR0, DOUBLELOCK, 36, 4) 1899 FIELD(ID_AA64DFR0, TRACEFILT, 40, 4) 1900 1901 FIELD(ID_DFR0, COPDBG, 0, 4) 1902 FIELD(ID_DFR0, COPSDBG, 4, 4) 1903 FIELD(ID_DFR0, MMAPDBG, 8, 4) 1904 FIELD(ID_DFR0, COPTRC, 12, 4) 1905 FIELD(ID_DFR0, MMAPTRC, 16, 4) 1906 FIELD(ID_DFR0, MPROFDBG, 20, 4) 1907 FIELD(ID_DFR0, PERFMON, 24, 4) 1908 FIELD(ID_DFR0, TRACEFILT, 28, 4) 1909 1910 FIELD(DBGDIDR, SE_IMP, 12, 1) 1911 FIELD(DBGDIDR, NSUHD_IMP, 14, 1) 1912 FIELD(DBGDIDR, VERSION, 16, 4) 1913 FIELD(DBGDIDR, CTX_CMPS, 20, 4) 1914 FIELD(DBGDIDR, BRPS, 24, 4) 1915 FIELD(DBGDIDR, WRPS, 28, 4) 1916 1917 FIELD(MVFR0, SIMDREG, 0, 4) 1918 FIELD(MVFR0, FPSP, 4, 4) 1919 FIELD(MVFR0, FPDP, 8, 4) 1920 FIELD(MVFR0, FPTRAP, 12, 4) 1921 FIELD(MVFR0, FPDIVIDE, 16, 4) 1922 FIELD(MVFR0, FPSQRT, 20, 4) 1923 FIELD(MVFR0, FPSHVEC, 24, 4) 1924 FIELD(MVFR0, FPROUND, 28, 4) 1925 1926 FIELD(MVFR1, FPFTZ, 0, 4) 1927 FIELD(MVFR1, FPDNAN, 4, 4) 1928 FIELD(MVFR1, SIMDLS, 8, 4) /* A-profile only */ 1929 FIELD(MVFR1, SIMDINT, 12, 4) /* A-profile only */ 1930 FIELD(MVFR1, SIMDSP, 16, 4) /* A-profile only */ 1931 FIELD(MVFR1, SIMDHP, 20, 4) /* A-profile only */ 1932 FIELD(MVFR1, MVE, 8, 4) /* M-profile only */ 1933 FIELD(MVFR1, FP16, 20, 4) /* M-profile only */ 1934 FIELD(MVFR1, FPHP, 24, 4) 1935 FIELD(MVFR1, SIMDFMAC, 28, 4) 1936 1937 FIELD(MVFR2, SIMDMISC, 0, 4) 1938 FIELD(MVFR2, FPMISC, 4, 4) 1939 1940 QEMU_BUILD_BUG_ON(ARRAY_SIZE(((ARMCPU *)0)->ccsidr) <= R_V7M_CSSELR_INDEX_MASK); 1941 1942 /* If adding a feature bit which corresponds to a Linux ELF 1943 * HWCAP bit, remember to update the feature-bit-to-hwcap 1944 * mapping in linux-user/elfload.c:get_elf_hwcap(). 1945 */ 1946 enum arm_features { 1947 ARM_FEATURE_AUXCR, /* ARM1026 Auxiliary control register. */ 1948 ARM_FEATURE_XSCALE, /* Intel XScale extensions. */ 1949 ARM_FEATURE_IWMMXT, /* Intel iwMMXt extension. */ 1950 ARM_FEATURE_V6, 1951 ARM_FEATURE_V6K, 1952 ARM_FEATURE_V7, 1953 ARM_FEATURE_THUMB2, 1954 ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */ 1955 ARM_FEATURE_NEON, 1956 ARM_FEATURE_M, /* Microcontroller profile. */ 1957 ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling. */ 1958 ARM_FEATURE_THUMB2EE, 1959 ARM_FEATURE_V7MP, /* v7 Multiprocessing Extensions */ 1960 ARM_FEATURE_V7VE, /* v7 Virtualization Extensions (non-EL2 parts) */ 1961 ARM_FEATURE_V4T, 1962 ARM_FEATURE_V5, 1963 ARM_FEATURE_STRONGARM, 1964 ARM_FEATURE_VAPA, /* cp15 VA to PA lookups */ 1965 ARM_FEATURE_GENERIC_TIMER, 1966 ARM_FEATURE_MVFR, /* Media and VFP Feature Registers 0 and 1 */ 1967 ARM_FEATURE_DUMMY_C15_REGS, /* RAZ/WI all of cp15 crn=15 */ 1968 ARM_FEATURE_CACHE_TEST_CLEAN, /* 926/1026 style test-and-clean ops */ 1969 ARM_FEATURE_CACHE_DIRTY_REG, /* 1136/1176 cache dirty status register */ 1970 ARM_FEATURE_CACHE_BLOCK_OPS, /* v6 optional cache block operations */ 1971 ARM_FEATURE_MPIDR, /* has cp15 MPIDR */ 1972 ARM_FEATURE_LPAE, /* has Large Physical Address Extension */ 1973 ARM_FEATURE_V8, 1974 ARM_FEATURE_AARCH64, /* supports 64 bit mode */ 1975 ARM_FEATURE_CBAR, /* has cp15 CBAR */ 1976 ARM_FEATURE_CBAR_RO, /* has cp15 CBAR and it is read-only */ 1977 ARM_FEATURE_EL2, /* has EL2 Virtualization support */ 1978 ARM_FEATURE_EL3, /* has EL3 Secure monitor support */ 1979 ARM_FEATURE_THUMB_DSP, /* DSP insns supported in the Thumb encodings */ 1980 ARM_FEATURE_PMU, /* has PMU support */ 1981 ARM_FEATURE_VBAR, /* has cp15 VBAR */ 1982 ARM_FEATURE_M_SECURITY, /* M profile Security Extension */ 1983 ARM_FEATURE_M_MAIN, /* M profile Main Extension */ 1984 }; 1985 1986 static inline int arm_feature(CPUARMState *env, int feature) 1987 { 1988 return (env->features & (1ULL << feature)) != 0; 1989 } 1990 1991 void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp); 1992 1993 #if !defined(CONFIG_USER_ONLY) 1994 /* Return true if exception levels below EL3 are in secure state, 1995 * or would be following an exception return to that level. 1996 * Unlike arm_is_secure() (which is always a question about the 1997 * _current_ state of the CPU) this doesn't care about the current 1998 * EL or mode. 1999 */ 2000 static inline bool arm_is_secure_below_el3(CPUARMState *env) 2001 { 2002 if (arm_feature(env, ARM_FEATURE_EL3)) { 2003 return !(env->cp15.scr_el3 & SCR_NS); 2004 } else { 2005 /* If EL3 is not supported then the secure state is implementation 2006 * defined, in which case QEMU defaults to non-secure. 2007 */ 2008 return false; 2009 } 2010 } 2011 2012 /* Return true if the CPU is AArch64 EL3 or AArch32 Mon */ 2013 static inline bool arm_is_el3_or_mon(CPUARMState *env) 2014 { 2015 if (arm_feature(env, ARM_FEATURE_EL3)) { 2016 if (is_a64(env) && extract32(env->pstate, 2, 2) == 3) { 2017 /* CPU currently in AArch64 state and EL3 */ 2018 return true; 2019 } else if (!is_a64(env) && 2020 (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) { 2021 /* CPU currently in AArch32 state and monitor mode */ 2022 return true; 2023 } 2024 } 2025 return false; 2026 } 2027 2028 /* Return true if the processor is in secure state */ 2029 static inline bool arm_is_secure(CPUARMState *env) 2030 { 2031 if (arm_is_el3_or_mon(env)) { 2032 return true; 2033 } 2034 return arm_is_secure_below_el3(env); 2035 } 2036 2037 #else 2038 static inline bool arm_is_secure_below_el3(CPUARMState *env) 2039 { 2040 return false; 2041 } 2042 2043 static inline bool arm_is_secure(CPUARMState *env) 2044 { 2045 return false; 2046 } 2047 #endif 2048 2049 /** 2050 * arm_hcr_el2_eff(): Return the effective value of HCR_EL2. 2051 * E.g. when in secure state, fields in HCR_EL2 are suppressed, 2052 * "for all purposes other than a direct read or write access of HCR_EL2." 2053 * Not included here is HCR_RW. 2054 */ 2055 uint64_t arm_hcr_el2_eff(CPUARMState *env); 2056 2057 /* Return true if the specified exception level is running in AArch64 state. */ 2058 static inline bool arm_el_is_aa64(CPUARMState *env, int el) 2059 { 2060 /* This isn't valid for EL0 (if we're in EL0, is_a64() is what you want, 2061 * and if we're not in EL0 then the state of EL0 isn't well defined.) 2062 */ 2063 assert(el >= 1 && el <= 3); 2064 bool aa64 = arm_feature(env, ARM_FEATURE_AARCH64); 2065 2066 /* The highest exception level is always at the maximum supported 2067 * register width, and then lower levels have a register width controlled 2068 * by bits in the SCR or HCR registers. 2069 */ 2070 if (el == 3) { 2071 return aa64; 2072 } 2073 2074 if (arm_feature(env, ARM_FEATURE_EL3)) { 2075 aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW); 2076 } 2077 2078 if (el == 2) { 2079 return aa64; 2080 } 2081 2082 if (arm_feature(env, ARM_FEATURE_EL2) && !arm_is_secure_below_el3(env)) { 2083 aa64 = aa64 && (env->cp15.hcr_el2 & HCR_RW); 2084 } 2085 2086 return aa64; 2087 } 2088 2089 /* Function for determing whether guest cp register reads and writes should 2090 * access the secure or non-secure bank of a cp register. When EL3 is 2091 * operating in AArch32 state, the NS-bit determines whether the secure 2092 * instance of a cp register should be used. When EL3 is AArch64 (or if 2093 * it doesn't exist at all) then there is no register banking, and all 2094 * accesses are to the non-secure version. 2095 */ 2096 static inline bool access_secure_reg(CPUARMState *env) 2097 { 2098 bool ret = (arm_feature(env, ARM_FEATURE_EL3) && 2099 !arm_el_is_aa64(env, 3) && 2100 !(env->cp15.scr_el3 & SCR_NS)); 2101 2102 return ret; 2103 } 2104 2105 /* Macros for accessing a specified CP register bank */ 2106 #define A32_BANKED_REG_GET(_env, _regname, _secure) \ 2107 ((_secure) ? (_env)->cp15._regname##_s : (_env)->cp15._regname##_ns) 2108 2109 #define A32_BANKED_REG_SET(_env, _regname, _secure, _val) \ 2110 do { \ 2111 if (_secure) { \ 2112 (_env)->cp15._regname##_s = (_val); \ 2113 } else { \ 2114 (_env)->cp15._regname##_ns = (_val); \ 2115 } \ 2116 } while (0) 2117 2118 /* Macros for automatically accessing a specific CP register bank depending on 2119 * the current secure state of the system. These macros are not intended for 2120 * supporting instruction translation reads/writes as these are dependent 2121 * solely on the SCR.NS bit and not the mode. 2122 */ 2123 #define A32_BANKED_CURRENT_REG_GET(_env, _regname) \ 2124 A32_BANKED_REG_GET((_env), _regname, \ 2125 (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3))) 2126 2127 #define A32_BANKED_CURRENT_REG_SET(_env, _regname, _val) \ 2128 A32_BANKED_REG_SET((_env), _regname, \ 2129 (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)), \ 2130 (_val)) 2131 2132 void arm_cpu_list(void); 2133 uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, 2134 uint32_t cur_el, bool secure); 2135 2136 /* Interface between CPU and Interrupt controller. */ 2137 #ifndef CONFIG_USER_ONLY 2138 bool armv7m_nvic_can_take_pending_exception(void *opaque); 2139 #else 2140 static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) 2141 { 2142 return true; 2143 } 2144 #endif 2145 /** 2146 * armv7m_nvic_set_pending: mark the specified exception as pending 2147 * @opaque: the NVIC 2148 * @irq: the exception number to mark pending 2149 * @secure: false for non-banked exceptions or for the nonsecure 2150 * version of a banked exception, true for the secure version of a banked 2151 * exception. 2152 * 2153 * Marks the specified exception as pending. Note that we will assert() 2154 * if @secure is true and @irq does not specify one of the fixed set 2155 * of architecturally banked exceptions. 2156 */ 2157 void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); 2158 /** 2159 * armv7m_nvic_set_pending_derived: mark this derived exception as pending 2160 * @opaque: the NVIC 2161 * @irq: the exception number to mark pending 2162 * @secure: false for non-banked exceptions or for the nonsecure 2163 * version of a banked exception, true for the secure version of a banked 2164 * exception. 2165 * 2166 * Similar to armv7m_nvic_set_pending(), but specifically for derived 2167 * exceptions (exceptions generated in the course of trying to take 2168 * a different exception). 2169 */ 2170 void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); 2171 /** 2172 * armv7m_nvic_set_pending_lazyfp: mark this lazy FP exception as pending 2173 * @opaque: the NVIC 2174 * @irq: the exception number to mark pending 2175 * @secure: false for non-banked exceptions or for the nonsecure 2176 * version of a banked exception, true for the secure version of a banked 2177 * exception. 2178 * 2179 * Similar to armv7m_nvic_set_pending(), but specifically for exceptions 2180 * generated in the course of lazy stacking of FP registers. 2181 */ 2182 void armv7m_nvic_set_pending_lazyfp(void *opaque, int irq, bool secure); 2183 /** 2184 * armv7m_nvic_get_pending_irq_info: return highest priority pending 2185 * exception, and whether it targets Secure state 2186 * @opaque: the NVIC 2187 * @pirq: set to pending exception number 2188 * @ptargets_secure: set to whether pending exception targets Secure 2189 * 2190 * This function writes the number of the highest priority pending 2191 * exception (the one which would be made active by 2192 * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure 2193 * to true if the current highest priority pending exception should 2194 * be taken to Secure state, false for NS. 2195 */ 2196 void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, 2197 bool *ptargets_secure); 2198 /** 2199 * armv7m_nvic_acknowledge_irq: make highest priority pending exception active 2200 * @opaque: the NVIC 2201 * 2202 * Move the current highest priority pending exception from the pending 2203 * state to the active state, and update v7m.exception to indicate that 2204 * it is the exception currently being handled. 2205 */ 2206 void armv7m_nvic_acknowledge_irq(void *opaque); 2207 /** 2208 * armv7m_nvic_complete_irq: complete specified interrupt or exception 2209 * @opaque: the NVIC 2210 * @irq: the exception number to complete 2211 * @secure: true if this exception was secure 2212 * 2213 * Returns: -1 if the irq was not active 2214 * 1 if completing this irq brought us back to base (no active irqs) 2215 * 0 if there is still an irq active after this one was completed 2216 * (Ignoring -1, this is the same as the RETTOBASE value before completion.) 2217 */ 2218 int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); 2219 /** 2220 * armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure) 2221 * @opaque: the NVIC 2222 * @irq: the exception number to mark pending 2223 * @secure: false for non-banked exceptions or for the nonsecure 2224 * version of a banked exception, true for the secure version of a banked 2225 * exception. 2226 * 2227 * Return whether an exception is "ready", i.e. whether the exception is 2228 * enabled and is configured at a priority which would allow it to 2229 * interrupt the current execution priority. This controls whether the 2230 * RDY bit for it in the FPCCR is set. 2231 */ 2232 bool armv7m_nvic_get_ready_status(void *opaque, int irq, bool secure); 2233 /** 2234 * armv7m_nvic_raw_execution_priority: return the raw execution priority 2235 * @opaque: the NVIC 2236 * 2237 * Returns: the raw execution priority as defined by the v8M architecture. 2238 * This is the execution priority minus the effects of AIRCR.PRIS, 2239 * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. 2240 * (v8M ARM ARM I_PKLD.) 2241 */ 2242 int armv7m_nvic_raw_execution_priority(void *opaque); 2243 /** 2244 * armv7m_nvic_neg_prio_requested: return true if the requested execution 2245 * priority is negative for the specified security state. 2246 * @opaque: the NVIC 2247 * @secure: the security state to test 2248 * This corresponds to the pseudocode IsReqExecPriNeg(). 2249 */ 2250 #ifndef CONFIG_USER_ONLY 2251 bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); 2252 #else 2253 static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) 2254 { 2255 return false; 2256 } 2257 #endif 2258 2259 /* Interface for defining coprocessor registers. 2260 * Registers are defined in tables of arm_cp_reginfo structs 2261 * which are passed to define_arm_cp_regs(). 2262 */ 2263 2264 /* When looking up a coprocessor register we look for it 2265 * via an integer which encodes all of: 2266 * coprocessor number 2267 * Crn, Crm, opc1, opc2 fields 2268 * 32 or 64 bit register (ie is it accessed via MRC/MCR 2269 * or via MRRC/MCRR?) 2270 * non-secure/secure bank (AArch32 only) 2271 * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. 2272 * (In this case crn and opc2 should be zero.) 2273 * For AArch64, there is no 32/64 bit size distinction; 2274 * instead all registers have a 2 bit op0, 3 bit op1 and op2, 2275 * and 4 bit CRn and CRm. The encoding patterns are chosen 2276 * to be easy to convert to and from the KVM encodings, and also 2277 * so that the hashtable can contain both AArch32 and AArch64 2278 * registers (to allow for interprocessing where we might run 2279 * 32 bit code on a 64 bit core). 2280 */ 2281 /* This bit is private to our hashtable cpreg; in KVM register 2282 * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 2283 * in the upper bits of the 64 bit ID. 2284 */ 2285 #define CP_REG_AA64_SHIFT 28 2286 #define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) 2287 2288 /* To enable banking of coprocessor registers depending on ns-bit we 2289 * add a bit to distinguish between secure and non-secure cpregs in the 2290 * hashtable. 2291 */ 2292 #define CP_REG_NS_SHIFT 29 2293 #define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) 2294 2295 #define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ 2296 ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ 2297 ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) 2298 2299 #define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ 2300 (CP_REG_AA64_MASK | \ 2301 ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ 2302 ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ 2303 ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ 2304 ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ 2305 ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ 2306 ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) 2307 2308 /* Convert a full 64 bit KVM register ID to the truncated 32 bit 2309 * version used as a key for the coprocessor register hashtable 2310 */ 2311 static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) 2312 { 2313 uint32_t cpregid = kvmid; 2314 if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { 2315 cpregid |= CP_REG_AA64_MASK; 2316 } else { 2317 if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { 2318 cpregid |= (1 << 15); 2319 } 2320 2321 /* KVM is always non-secure so add the NS flag on AArch32 register 2322 * entries. 2323 */ 2324 cpregid |= 1 << CP_REG_NS_SHIFT; 2325 } 2326 return cpregid; 2327 } 2328 2329 /* Convert a truncated 32 bit hashtable key into the full 2330 * 64 bit KVM register ID. 2331 */ 2332 static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) 2333 { 2334 uint64_t kvmid; 2335 2336 if (cpregid & CP_REG_AA64_MASK) { 2337 kvmid = cpregid & ~CP_REG_AA64_MASK; 2338 kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; 2339 } else { 2340 kvmid = cpregid & ~(1 << 15); 2341 if (cpregid & (1 << 15)) { 2342 kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; 2343 } else { 2344 kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; 2345 } 2346 } 2347 return kvmid; 2348 } 2349 2350 /* ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a 2351 * special-behaviour cp reg and bits [11..8] indicate what behaviour 2352 * it has. Otherwise it is a simple cp reg, where CONST indicates that 2353 * TCG can assume the value to be constant (ie load at translate time) 2354 * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END 2355 * indicates that the TB should not be ended after a write to this register 2356 * (the default is that the TB ends after cp writes). OVERRIDE permits 2357 * a register definition to override a previous definition for the 2358 * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the 2359 * old must have the OVERRIDE bit set. 2360 * ALIAS indicates that this register is an alias view of some underlying 2361 * state which is also visible via another register, and that the other 2362 * register is handling migration and reset; registers marked ALIAS will not be 2363 * migrated but may have their state set by syncing of register state from KVM. 2364 * NO_RAW indicates that this register has no underlying state and does not 2365 * support raw access for state saving/loading; it will not be used for either 2366 * migration or KVM state synchronization. (Typically this is for "registers" 2367 * which are actually used as instructions for cache maintenance and so on.) 2368 * IO indicates that this register does I/O and therefore its accesses 2369 * need to be marked with gen_io_start() and also end the TB. In particular, 2370 * registers which implement clocks or timers require this. 2371 * RAISES_EXC is for when the read or write hook might raise an exception; 2372 * the generated code will synchronize the CPU state before calling the hook 2373 * so that it is safe for the hook to call raise_exception(). 2374 * NEWEL is for writes to registers that might change the exception 2375 * level - typically on older ARM chips. For those cases we need to 2376 * re-read the new el when recomputing the translation flags. 2377 */ 2378 #define ARM_CP_SPECIAL 0x0001 2379 #define ARM_CP_CONST 0x0002 2380 #define ARM_CP_64BIT 0x0004 2381 #define ARM_CP_SUPPRESS_TB_END 0x0008 2382 #define ARM_CP_OVERRIDE 0x0010 2383 #define ARM_CP_ALIAS 0x0020 2384 #define ARM_CP_IO 0x0040 2385 #define ARM_CP_NO_RAW 0x0080 2386 #define ARM_CP_NOP (ARM_CP_SPECIAL | 0x0100) 2387 #define ARM_CP_WFI (ARM_CP_SPECIAL | 0x0200) 2388 #define ARM_CP_NZCV (ARM_CP_SPECIAL | 0x0300) 2389 #define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | 0x0400) 2390 #define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | 0x0500) 2391 #define ARM_CP_DC_GVA (ARM_CP_SPECIAL | 0x0600) 2392 #define ARM_CP_DC_GZVA (ARM_CP_SPECIAL | 0x0700) 2393 #define ARM_LAST_SPECIAL ARM_CP_DC_GZVA 2394 #define ARM_CP_FPU 0x1000 2395 #define ARM_CP_SVE 0x2000 2396 #define ARM_CP_NO_GDB 0x4000 2397 #define ARM_CP_RAISES_EXC 0x8000 2398 #define ARM_CP_NEWEL 0x10000 2399 /* Used only as a terminator for ARMCPRegInfo lists */ 2400 #define ARM_CP_SENTINEL 0xfffff 2401 /* Mask of only the flag bits in a type field */ 2402 #define ARM_CP_FLAG_MASK 0x1f0ff 2403 2404 /* Valid values for ARMCPRegInfo state field, indicating which of 2405 * the AArch32 and AArch64 execution states this register is visible in. 2406 * If the reginfo doesn't explicitly specify then it is AArch32 only. 2407 * If the reginfo is declared to be visible in both states then a second 2408 * reginfo is synthesised for the AArch32 view of the AArch64 register, 2409 * such that the AArch32 view is the lower 32 bits of the AArch64 one. 2410 * Note that we rely on the values of these enums as we iterate through 2411 * the various states in some places. 2412 */ 2413 enum { 2414 ARM_CP_STATE_AA32 = 0, 2415 ARM_CP_STATE_AA64 = 1, 2416 ARM_CP_STATE_BOTH = 2, 2417 }; 2418 2419 /* ARM CP register secure state flags. These flags identify security state 2420 * attributes for a given CP register entry. 2421 * The existence of both or neither secure and non-secure flags indicates that 2422 * the register has both a secure and non-secure hash entry. A single one of 2423 * these flags causes the register to only be hashed for the specified 2424 * security state. 2425 * Although definitions may have any combination of the S/NS bits, each 2426 * registered entry will only have one to identify whether the entry is secure 2427 * or non-secure. 2428 */ 2429 enum { 2430 ARM_CP_SECSTATE_S = (1 << 0), /* bit[0]: Secure state register */ 2431 ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ 2432 }; 2433 2434 /* Return true if cptype is a valid type field. This is used to try to 2435 * catch errors where the sentinel has been accidentally left off the end 2436 * of a list of registers. 2437 */ 2438 static inline bool cptype_valid(int cptype) 2439 { 2440 return ((cptype & ~ARM_CP_FLAG_MASK) == 0) 2441 || ((cptype & ARM_CP_SPECIAL) && 2442 ((cptype & ~ARM_CP_FLAG_MASK) <= ARM_LAST_SPECIAL)); 2443 } 2444 2445 /* Access rights: 2446 * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM 2447 * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and 2448 * PL2 (hyp). The other level which has Read and Write bits is Secure PL1 2449 * (ie any of the privileged modes in Secure state, or Monitor mode). 2450 * If a register is accessible in one privilege level it's always accessible 2451 * in higher privilege levels too. Since "Secure PL1" also follows this rule 2452 * (ie anything visible in PL2 is visible in S-PL1, some things are only 2453 * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the 2454 * terminology a little and call this PL3. 2455 * In AArch64 things are somewhat simpler as the PLx bits line up exactly 2456 * with the ELx exception levels. 2457 * 2458 * If access permissions for a register are more complex than can be 2459 * described with these bits, then use a laxer set of restrictions, and 2460 * do the more restrictive/complex check inside a helper function. 2461 */ 2462 #define PL3_R 0x80 2463 #define PL3_W 0x40 2464 #define PL2_R (0x20 | PL3_R) 2465 #define PL2_W (0x10 | PL3_W) 2466 #define PL1_R (0x08 | PL2_R) 2467 #define PL1_W (0x04 | PL2_W) 2468 #define PL0_R (0x02 | PL1_R) 2469 #define PL0_W (0x01 | PL1_W) 2470 2471 /* 2472 * For user-mode some registers are accessible to EL0 via a kernel 2473 * trap-and-emulate ABI. In this case we define the read permissions 2474 * as actually being PL0_R. However some bits of any given register 2475 * may still be masked. 2476 */ 2477 #ifdef CONFIG_USER_ONLY 2478 #define PL0U_R PL0_R 2479 #else 2480 #define PL0U_R PL1_R 2481 #endif 2482 2483 #define PL3_RW (PL3_R | PL3_W) 2484 #define PL2_RW (PL2_R | PL2_W) 2485 #define PL1_RW (PL1_R | PL1_W) 2486 #define PL0_RW (PL0_R | PL0_W) 2487 2488 /* Return the highest implemented Exception Level */ 2489 static inline int arm_highest_el(CPUARMState *env) 2490 { 2491 if (arm_feature(env, ARM_FEATURE_EL3)) { 2492 return 3; 2493 } 2494 if (arm_feature(env, ARM_FEATURE_EL2)) { 2495 return 2; 2496 } 2497 return 1; 2498 } 2499 2500 /* Return true if a v7M CPU is in Handler mode */ 2501 static inline bool arm_v7m_is_handler_mode(CPUARMState *env) 2502 { 2503 return env->v7m.exception != 0; 2504 } 2505 2506 /* Return the current Exception Level (as per ARMv8; note that this differs 2507 * from the ARMv7 Privilege Level). 2508 */ 2509 static inline int arm_current_el(CPUARMState *env) 2510 { 2511 if (arm_feature(env, ARM_FEATURE_M)) { 2512 return arm_v7m_is_handler_mode(env) || 2513 !(env->v7m.control[env->v7m.secure] & 1); 2514 } 2515 2516 if (is_a64(env)) { 2517 return extract32(env->pstate, 2, 2); 2518 } 2519 2520 switch (env->uncached_cpsr & 0x1f) { 2521 case ARM_CPU_MODE_USR: 2522 return 0; 2523 case ARM_CPU_MODE_HYP: 2524 return 2; 2525 case ARM_CPU_MODE_MON: 2526 return 3; 2527 default: 2528 if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { 2529 /* If EL3 is 32-bit then all secure privileged modes run in 2530 * EL3 2531 */ 2532 return 3; 2533 } 2534 2535 return 1; 2536 } 2537 } 2538 2539 typedef struct ARMCPRegInfo ARMCPRegInfo; 2540 2541 typedef enum CPAccessResult { 2542 /* Access is permitted */ 2543 CP_ACCESS_OK = 0, 2544 /* Access fails due to a configurable trap or enable which would 2545 * result in a categorized exception syndrome giving information about 2546 * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, 2547 * 0xc or 0x18). The exception is taken to the usual target EL (EL1 or 2548 * PL1 if in EL0, otherwise to the current EL). 2549 */ 2550 CP_ACCESS_TRAP = 1, 2551 /* Access fails and results in an exception syndrome 0x0 ("uncategorized"). 2552 * Note that this is not a catch-all case -- the set of cases which may 2553 * result in this failure is specifically defined by the architecture. 2554 */ 2555 CP_ACCESS_TRAP_UNCATEGORIZED = 2, 2556 /* As CP_ACCESS_TRAP, but for traps directly to EL2 or EL3 */ 2557 CP_ACCESS_TRAP_EL2 = 3, 2558 CP_ACCESS_TRAP_EL3 = 4, 2559 /* As CP_ACCESS_UNCATEGORIZED, but for traps directly to EL2 or EL3 */ 2560 CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = 5, 2561 CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = 6, 2562 /* Access fails and results in an exception syndrome for an FP access, 2563 * trapped directly to EL2 or EL3 2564 */ 2565 CP_ACCESS_TRAP_FP_EL2 = 7, 2566 CP_ACCESS_TRAP_FP_EL3 = 8, 2567 } CPAccessResult; 2568 2569 /* Access functions for coprocessor registers. These cannot fail and 2570 * may not raise exceptions. 2571 */ 2572 typedef uint64_t CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque); 2573 typedef void CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque, 2574 uint64_t value); 2575 /* Access permission check functions for coprocessor registers. */ 2576 typedef CPAccessResult CPAccessFn(CPUARMState *env, 2577 const ARMCPRegInfo *opaque, 2578 bool isread); 2579 /* Hook function for register reset */ 2580 typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque); 2581 2582 #define CP_ANY 0xff 2583 2584 /* Definition of an ARM coprocessor register */ 2585 struct ARMCPRegInfo { 2586 /* Name of register (useful mainly for debugging, need not be unique) */ 2587 const char *name; 2588 /* Location of register: coprocessor number and (crn,crm,opc1,opc2) 2589 * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a 2590 * 'wildcard' field -- any value of that field in the MRC/MCR insn 2591 * will be decoded to this register. The register read and write 2592 * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2 2593 * used by the program, so it is possible to register a wildcard and 2594 * then behave differently on read/write if necessary. 2595 * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 2596 * must both be zero. 2597 * For AArch64-visible registers, opc0 is also used. 2598 * Since there are no "coprocessors" in AArch64, cp is purely used as a 2599 * way to distinguish (for KVM's benefit) guest-visible system registers 2600 * from demuxed ones provided to preserve the "no side effects on 2601 * KVM register read/write from QEMU" semantics. cp==0x13 is guest 2602 * visible (to match KVM's encoding); cp==0 will be converted to 2603 * cp==0x13 when the ARMCPRegInfo is registered, for convenience. 2604 */ 2605 uint8_t cp; 2606 uint8_t crn; 2607 uint8_t crm; 2608 uint8_t opc0; 2609 uint8_t opc1; 2610 uint8_t opc2; 2611 /* Execution state in which this register is visible: ARM_CP_STATE_* */ 2612 int state; 2613 /* Register type: ARM_CP_* bits/values */ 2614 int type; 2615 /* Access rights: PL*_[RW] */ 2616 int access; 2617 /* Security state: ARM_CP_SECSTATE_* bits/values */ 2618 int secure; 2619 /* The opaque pointer passed to define_arm_cp_regs_with_opaque() when 2620 * this register was defined: can be used to hand data through to the 2621 * register read/write functions, since they are passed the ARMCPRegInfo*. 2622 */ 2623 void *opaque; 2624 /* Value of this register, if it is ARM_CP_CONST. Otherwise, if 2625 * fieldoffset is non-zero, the reset value of the register. 2626 */ 2627 uint64_t resetvalue; 2628 /* Offset of the field in CPUARMState for this register. 2629 * 2630 * This is not needed if either: 2631 * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs 2632 * 2. both readfn and writefn are specified 2633 */ 2634 ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */ 2635 2636 /* Offsets of the secure and non-secure fields in CPUARMState for the 2637 * register if it is banked. These fields are only used during the static 2638 * registration of a register. During hashing the bank associated 2639 * with a given security state is copied to fieldoffset which is used from 2640 * there on out. 2641 * 2642 * It is expected that register definitions use either fieldoffset or 2643 * bank_fieldoffsets in the definition but not both. It is also expected 2644 * that both bank offsets are set when defining a banked register. This 2645 * use indicates that a register is banked. 2646 */ 2647 ptrdiff_t bank_fieldoffsets[2]; 2648 2649 /* Function for making any access checks for this register in addition to 2650 * those specified by the 'access' permissions bits. If NULL, no extra 2651 * checks required. The access check is performed at runtime, not at 2652 * translate time. 2653 */ 2654 CPAccessFn *accessfn; 2655 /* Function for handling reads of this register. If NULL, then reads 2656 * will be done by loading from the offset into CPUARMState specified 2657 * by fieldoffset. 2658 */ 2659 CPReadFn *readfn; 2660 /* Function for handling writes of this register. If NULL, then writes 2661 * will be done by writing to the offset into CPUARMState specified 2662 * by fieldoffset. 2663 */ 2664 CPWriteFn *writefn; 2665 /* Function for doing a "raw" read; used when we need to copy 2666 * coprocessor state to the kernel for KVM or out for 2667 * migration. This only needs to be provided if there is also a 2668 * readfn and it has side effects (for instance clear-on-read bits). 2669 */ 2670 CPReadFn *raw_readfn; 2671 /* Function for doing a "raw" write; used when we need to copy KVM 2672 * kernel coprocessor state into userspace, or for inbound 2673 * migration. This only needs to be provided if there is also a 2674 * writefn and it masks out "unwritable" bits or has write-one-to-clear 2675 * or similar behaviour. 2676 */ 2677 CPWriteFn *raw_writefn; 2678 /* Function for resetting the register. If NULL, then reset will be done 2679 * by writing resetvalue to the field specified in fieldoffset. If 2680 * fieldoffset is 0 then no reset will be done. 2681 */ 2682 CPResetFn *resetfn; 2683 2684 /* 2685 * "Original" writefn and readfn. 2686 * For ARMv8.1-VHE register aliases, we overwrite the read/write 2687 * accessor functions of various EL1/EL0 to perform the runtime 2688 * check for which sysreg should actually be modified, and then 2689 * forwards the operation. Before overwriting the accessors, 2690 * the original function is copied here, so that accesses that 2691 * really do go to the EL1/EL0 version proceed normally. 2692 * (The corresponding EL2 register is linked via opaque.) 2693 */ 2694 CPReadFn *orig_readfn; 2695 CPWriteFn *orig_writefn; 2696 }; 2697 2698 /* Macros which are lvalues for the field in CPUARMState for the 2699 * ARMCPRegInfo *ri. 2700 */ 2701 #define CPREG_FIELD32(env, ri) \ 2702 (*(uint32_t *)((char *)(env) + (ri)->fieldoffset)) 2703 #define CPREG_FIELD64(env, ri) \ 2704 (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) 2705 2706 #define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL } 2707 2708 void define_arm_cp_regs_with_opaque(ARMCPU *cpu, 2709 const ARMCPRegInfo *regs, void *opaque); 2710 void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, 2711 const ARMCPRegInfo *regs, void *opaque); 2712 static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs) 2713 { 2714 define_arm_cp_regs_with_opaque(cpu, regs, 0); 2715 } 2716 static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) 2717 { 2718 define_one_arm_cp_reg_with_opaque(cpu, regs, 0); 2719 } 2720 const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp); 2721 2722 /* 2723 * Definition of an ARM co-processor register as viewed from 2724 * userspace. This is used for presenting sanitised versions of 2725 * registers to userspace when emulating the Linux AArch64 CPU 2726 * ID/feature ABI (advertised as HWCAP_CPUID). 2727 */ 2728 typedef struct ARMCPRegUserSpaceInfo { 2729 /* Name of register */ 2730 const char *name; 2731 2732 /* Is the name actually a glob pattern */ 2733 bool is_glob; 2734 2735 /* Only some bits are exported to user space */ 2736 uint64_t exported_bits; 2737 2738 /* Fixed bits are applied after the mask */ 2739 uint64_t fixed_bits; 2740 } ARMCPRegUserSpaceInfo; 2741 2742 #define REGUSERINFO_SENTINEL { .name = NULL } 2743 2744 void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods); 2745 2746 /* CPWriteFn that can be used to implement writes-ignored behaviour */ 2747 void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, 2748 uint64_t value); 2749 /* CPReadFn that can be used for read-as-zero behaviour */ 2750 uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri); 2751 2752 /* CPResetFn that does nothing, for use if no reset is required even 2753 * if fieldoffset is non zero. 2754 */ 2755 void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque); 2756 2757 /* Return true if this reginfo struct's field in the cpu state struct 2758 * is 64 bits wide. 2759 */ 2760 static inline bool cpreg_field_is_64bit(const ARMCPRegInfo *ri) 2761 { 2762 return (ri->state == ARM_CP_STATE_AA64) || (ri->type & ARM_CP_64BIT); 2763 } 2764 2765 static inline bool cp_access_ok(int current_el, 2766 const ARMCPRegInfo *ri, int isread) 2767 { 2768 return (ri->access >> ((current_el * 2) + isread)) & 1; 2769 } 2770 2771 /* Raw read of a coprocessor register (as needed for migration, etc) */ 2772 uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri); 2773 2774 /** 2775 * write_list_to_cpustate 2776 * @cpu: ARMCPU 2777 * 2778 * For each register listed in the ARMCPU cpreg_indexes list, write 2779 * its value from the cpreg_values list into the ARMCPUState structure. 2780 * This updates TCG's working data structures from KVM data or 2781 * from incoming migration state. 2782 * 2783 * Returns: true if all register values were updated correctly, 2784 * false if some register was unknown or could not be written. 2785 * Note that we do not stop early on failure -- we will attempt 2786 * writing all registers in the list. 2787 */ 2788 bool write_list_to_cpustate(ARMCPU *cpu); 2789 2790 /** 2791 * write_cpustate_to_list: 2792 * @cpu: ARMCPU 2793 * @kvm_sync: true if this is for syncing back to KVM 2794 * 2795 * For each register listed in the ARMCPU cpreg_indexes list, write 2796 * its value from the ARMCPUState structure into the cpreg_values list. 2797 * This is used to copy info from TCG's working data structures into 2798 * KVM or for outbound migration. 2799 * 2800 * @kvm_sync is true if we are doing this in order to sync the 2801 * register state back to KVM. In this case we will only update 2802 * values in the list if the previous list->cpustate sync actually 2803 * successfully wrote the CPU state. Otherwise we will keep the value 2804 * that is in the list. 2805 * 2806 * Returns: true if all register values were read correctly, 2807 * false if some register was unknown or could not be read. 2808 * Note that we do not stop early on failure -- we will attempt 2809 * reading all registers in the list. 2810 */ 2811 bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync); 2812 2813 #define ARM_CPUID_TI915T 0x54029152 2814 #define ARM_CPUID_TI925T 0x54029252 2815 2816 #define ARM_CPU_TYPE_SUFFIX "-" TYPE_ARM_CPU 2817 #define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX) 2818 #define CPU_RESOLVING_TYPE TYPE_ARM_CPU 2819 2820 #define cpu_signal_handler cpu_arm_signal_handler 2821 #define cpu_list arm_cpu_list 2822 2823 /* ARM has the following "translation regimes" (as the ARM ARM calls them): 2824 * 2825 * If EL3 is 64-bit: 2826 * + NonSecure EL1 & 0 stage 1 2827 * + NonSecure EL1 & 0 stage 2 2828 * + NonSecure EL2 2829 * + NonSecure EL2 & 0 (ARMv8.1-VHE) 2830 * + Secure EL1 & 0 2831 * + Secure EL3 2832 * If EL3 is 32-bit: 2833 * + NonSecure PL1 & 0 stage 1 2834 * + NonSecure PL1 & 0 stage 2 2835 * + NonSecure PL2 2836 * + Secure PL0 2837 * + Secure PL1 2838 * (reminder: for 32 bit EL3, Secure PL1 is *EL3*, not EL1.) 2839 * 2840 * For QEMU, an mmu_idx is not quite the same as a translation regime because: 2841 * 1. we need to split the "EL1 & 0" and "EL2 & 0" regimes into two mmu_idxes, 2842 * because they may differ in access permissions even if the VA->PA map is 2843 * the same 2844 * 2. we want to cache in our TLB the full VA->IPA->PA lookup for a stage 1+2 2845 * translation, which means that we have one mmu_idx that deals with two 2846 * concatenated translation regimes [this sort of combined s1+2 TLB is 2847 * architecturally permitted] 2848 * 3. we don't need to allocate an mmu_idx to translations that we won't be 2849 * handling via the TLB. The only way to do a stage 1 translation without 2850 * the immediate stage 2 translation is via the ATS or AT system insns, 2851 * which can be slow-pathed and always do a page table walk. 2852 * The only use of stage 2 translations is either as part of an s1+2 2853 * lookup or when loading the descriptors during a stage 1 page table walk, 2854 * and in both those cases we don't use the TLB. 2855 * 4. we can also safely fold together the "32 bit EL3" and "64 bit EL3" 2856 * translation regimes, because they map reasonably well to each other 2857 * and they can't both be active at the same time. 2858 * 5. we want to be able to use the TLB for accesses done as part of a 2859 * stage1 page table walk, rather than having to walk the stage2 page 2860 * table over and over. 2861 * 6. we need separate EL1/EL2 mmu_idx for handling the Privileged Access 2862 * Never (PAN) bit within PSTATE. 2863 * 2864 * This gives us the following list of cases: 2865 * 2866 * NS EL0 EL1&0 stage 1+2 (aka NS PL0) 2867 * NS EL1 EL1&0 stage 1+2 (aka NS PL1) 2868 * NS EL1 EL1&0 stage 1+2 +PAN 2869 * NS EL0 EL2&0 2870 * NS EL2 EL2&0 2871 * NS EL2 EL2&0 +PAN 2872 * NS EL2 (aka NS PL2) 2873 * S EL0 EL1&0 (aka S PL0) 2874 * S EL1 EL1&0 (not used if EL3 is 32 bit) 2875 * S EL1 EL1&0 +PAN 2876 * S EL3 (aka S PL1) 2877 * 2878 * for a total of 11 different mmu_idx. 2879 * 2880 * R profile CPUs have an MPU, but can use the same set of MMU indexes 2881 * as A profile. They only need to distinguish NS EL0 and NS EL1 (and 2882 * NS EL2 if we ever model a Cortex-R52). 2883 * 2884 * M profile CPUs are rather different as they do not have a true MMU. 2885 * They have the following different MMU indexes: 2886 * User 2887 * Privileged 2888 * User, execution priority negative (ie the MPU HFNMIENA bit may apply) 2889 * Privileged, execution priority negative (ditto) 2890 * If the CPU supports the v8M Security Extension then there are also: 2891 * Secure User 2892 * Secure Privileged 2893 * Secure User, execution priority negative 2894 * Secure Privileged, execution priority negative 2895 * 2896 * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code 2897 * are not quite the same -- different CPU types (most notably M profile 2898 * vs A/R profile) would like to use MMU indexes with different semantics, 2899 * but since we don't ever need to use all of those in a single CPU we 2900 * can avoid having to set NB_MMU_MODES to "total number of A profile MMU 2901 * modes + total number of M profile MMU modes". The lower bits of 2902 * ARMMMUIdx are the core TLB mmu index, and the higher bits are always 2903 * the same for any particular CPU. 2904 * Variables of type ARMMUIdx are always full values, and the core 2905 * index values are in variables of type 'int'. 2906 * 2907 * Our enumeration includes at the end some entries which are not "true" 2908 * mmu_idx values in that they don't have corresponding TLBs and are only 2909 * valid for doing slow path page table walks. 2910 * 2911 * The constant names here are patterned after the general style of the names 2912 * of the AT/ATS operations. 2913 * The values used are carefully arranged to make mmu_idx => EL lookup easy. 2914 * For M profile we arrange them to have a bit for priv, a bit for negpri 2915 * and a bit for secure. 2916 */ 2917 #define ARM_MMU_IDX_A 0x10 /* A profile */ 2918 #define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ 2919 #define ARM_MMU_IDX_M 0x40 /* M profile */ 2920 2921 /* Meanings of the bits for M profile mmu idx values */ 2922 #define ARM_MMU_IDX_M_PRIV 0x1 2923 #define ARM_MMU_IDX_M_NEGPRI 0x2 2924 #define ARM_MMU_IDX_M_S 0x4 /* Secure */ 2925 2926 #define ARM_MMU_IDX_TYPE_MASK \ 2927 (ARM_MMU_IDX_A | ARM_MMU_IDX_M | ARM_MMU_IDX_NOTLB) 2928 #define ARM_MMU_IDX_COREIDX_MASK 0xf 2929 2930 typedef enum ARMMMUIdx { 2931 /* 2932 * A-profile. 2933 */ 2934 ARMMMUIdx_E10_0 = 0 | ARM_MMU_IDX_A, 2935 ARMMMUIdx_E20_0 = 1 | ARM_MMU_IDX_A, 2936 2937 ARMMMUIdx_E10_1 = 2 | ARM_MMU_IDX_A, 2938 ARMMMUIdx_E10_1_PAN = 3 | ARM_MMU_IDX_A, 2939 2940 ARMMMUIdx_E2 = 4 | ARM_MMU_IDX_A, 2941 ARMMMUIdx_E20_2 = 5 | ARM_MMU_IDX_A, 2942 ARMMMUIdx_E20_2_PAN = 6 | ARM_MMU_IDX_A, 2943 2944 ARMMMUIdx_SE10_0 = 7 | ARM_MMU_IDX_A, 2945 ARMMMUIdx_SE10_1 = 8 | ARM_MMU_IDX_A, 2946 ARMMMUIdx_SE10_1_PAN = 9 | ARM_MMU_IDX_A, 2947 ARMMMUIdx_SE3 = 10 | ARM_MMU_IDX_A, 2948 2949 /* 2950 * These are not allocated TLBs and are used only for AT system 2951 * instructions or for the first stage of an S12 page table walk. 2952 */ 2953 ARMMMUIdx_Stage1_E0 = 0 | ARM_MMU_IDX_NOTLB, 2954 ARMMMUIdx_Stage1_E1 = 1 | ARM_MMU_IDX_NOTLB, 2955 ARMMMUIdx_Stage1_E1_PAN = 2 | ARM_MMU_IDX_NOTLB, 2956 /* 2957 * Not allocated a TLB: used only for second stage of an S12 page 2958 * table walk, or for descriptor loads during first stage of an S1 2959 * page table walk. Note that if we ever want to have a TLB for this 2960 * then various TLB flush insns which currently are no-ops or flush 2961 * only stage 1 MMU indexes will need to change to flush stage 2. 2962 */ 2963 ARMMMUIdx_Stage2 = 3 | ARM_MMU_IDX_NOTLB, 2964 2965 /* 2966 * M-profile. 2967 */ 2968 ARMMMUIdx_MUser = ARM_MMU_IDX_M, 2969 ARMMMUIdx_MPriv = ARM_MMU_IDX_M | ARM_MMU_IDX_M_PRIV, 2970 ARMMMUIdx_MUserNegPri = ARMMMUIdx_MUser | ARM_MMU_IDX_M_NEGPRI, 2971 ARMMMUIdx_MPrivNegPri = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_NEGPRI, 2972 ARMMMUIdx_MSUser = ARMMMUIdx_MUser | ARM_MMU_IDX_M_S, 2973 ARMMMUIdx_MSPriv = ARMMMUIdx_MPriv | ARM_MMU_IDX_M_S, 2974 ARMMMUIdx_MSUserNegPri = ARMMMUIdx_MUserNegPri | ARM_MMU_IDX_M_S, 2975 ARMMMUIdx_MSPrivNegPri = ARMMMUIdx_MPrivNegPri | ARM_MMU_IDX_M_S, 2976 } ARMMMUIdx; 2977 2978 /* 2979 * Bit macros for the core-mmu-index values for each index, 2980 * for use when calling tlb_flush_by_mmuidx() and friends. 2981 */ 2982 #define TO_CORE_BIT(NAME) \ 2983 ARMMMUIdxBit_##NAME = 1 << (ARMMMUIdx_##NAME & ARM_MMU_IDX_COREIDX_MASK) 2984 2985 typedef enum ARMMMUIdxBit { 2986 TO_CORE_BIT(E10_0), 2987 TO_CORE_BIT(E20_0), 2988 TO_CORE_BIT(E10_1), 2989 TO_CORE_BIT(E10_1_PAN), 2990 TO_CORE_BIT(E2), 2991 TO_CORE_BIT(E20_2), 2992 TO_CORE_BIT(E20_2_PAN), 2993 TO_CORE_BIT(SE10_0), 2994 TO_CORE_BIT(SE10_1), 2995 TO_CORE_BIT(SE10_1_PAN), 2996 TO_CORE_BIT(SE3), 2997 2998 TO_CORE_BIT(MUser), 2999 TO_CORE_BIT(MPriv), 3000 TO_CORE_BIT(MUserNegPri), 3001 TO_CORE_BIT(MPrivNegPri), 3002 TO_CORE_BIT(MSUser), 3003 TO_CORE_BIT(MSPriv), 3004 TO_CORE_BIT(MSUserNegPri), 3005 TO_CORE_BIT(MSPrivNegPri), 3006 } ARMMMUIdxBit; 3007 3008 #undef TO_CORE_BIT 3009 3010 #define MMU_USER_IDX 0 3011 3012 /* Indexes used when registering address spaces with cpu_address_space_init */ 3013 typedef enum ARMASIdx { 3014 ARMASIdx_NS = 0, 3015 ARMASIdx_S = 1, 3016 ARMASIdx_TagNS = 2, 3017 ARMASIdx_TagS = 3, 3018 } ARMASIdx; 3019 3020 /* Return the Exception Level targeted by debug exceptions. */ 3021 static inline int arm_debug_target_el(CPUARMState *env) 3022 { 3023 bool secure = arm_is_secure(env); 3024 bool route_to_el2 = false; 3025 3026 if (arm_feature(env, ARM_FEATURE_EL2) && !secure) { 3027 route_to_el2 = env->cp15.hcr_el2 & HCR_TGE || 3028 env->cp15.mdcr_el2 & MDCR_TDE; 3029 } 3030 3031 if (route_to_el2) { 3032 return 2; 3033 } else if (arm_feature(env, ARM_FEATURE_EL3) && 3034 !arm_el_is_aa64(env, 3) && secure) { 3035 return 3; 3036 } else { 3037 return 1; 3038 } 3039 } 3040 3041 static inline bool arm_v7m_csselr_razwi(ARMCPU *cpu) 3042 { 3043 /* If all the CLIDR.Ctypem bits are 0 there are no caches, and 3044 * CSSELR is RAZ/WI. 3045 */ 3046 return (cpu->clidr & R_V7M_CLIDR_CTYPE_ALL_MASK) != 0; 3047 } 3048 3049 /* See AArch64.GenerateDebugExceptionsFrom() in ARM ARM pseudocode */ 3050 static inline bool aa64_generate_debug_exceptions(CPUARMState *env) 3051 { 3052 int cur_el = arm_current_el(env); 3053 int debug_el; 3054 3055 if (cur_el == 3) { 3056 return false; 3057 } 3058 3059 /* MDCR_EL3.SDD disables debug events from Secure state */ 3060 if (arm_is_secure_below_el3(env) 3061 && extract32(env->cp15.mdcr_el3, 16, 1)) { 3062 return false; 3063 } 3064 3065 /* 3066 * Same EL to same EL debug exceptions need MDSCR_KDE enabled 3067 * while not masking the (D)ebug bit in DAIF. 3068 */ 3069 debug_el = arm_debug_target_el(env); 3070 3071 if (cur_el == debug_el) { 3072 return extract32(env->cp15.mdscr_el1, 13, 1) 3073 && !(env->daif & PSTATE_D); 3074 } 3075 3076 /* Otherwise the debug target needs to be a higher EL */ 3077 return debug_el > cur_el; 3078 } 3079 3080 static inline bool aa32_generate_debug_exceptions(CPUARMState *env) 3081 { 3082 int el = arm_current_el(env); 3083 3084 if (el == 0 && arm_el_is_aa64(env, 1)) { 3085 return aa64_generate_debug_exceptions(env); 3086 } 3087 3088 if (arm_is_secure(env)) { 3089 int spd; 3090 3091 if (el == 0 && (env->cp15.sder & 1)) { 3092 /* SDER.SUIDEN means debug exceptions from Secure EL0 3093 * are always enabled. Otherwise they are controlled by 3094 * SDCR.SPD like those from other Secure ELs. 3095 */ 3096 return true; 3097 } 3098 3099 spd = extract32(env->cp15.mdcr_el3, 14, 2); 3100 switch (spd) { 3101 case 1: 3102 /* SPD == 0b01 is reserved, but behaves as 0b00. */ 3103 case 0: 3104 /* For 0b00 we return true if external secure invasive debug 3105 * is enabled. On real hardware this is controlled by external 3106 * signals to the core. QEMU always permits debug, and behaves 3107 * as if DBGEN, SPIDEN, NIDEN and SPNIDEN are all tied high. 3108 */ 3109 return true; 3110 case 2: 3111 return false; 3112 case 3: 3113 return true; 3114 } 3115 } 3116 3117 return el != 2; 3118 } 3119 3120 /* Return true if debugging exceptions are currently enabled. 3121 * This corresponds to what in ARM ARM pseudocode would be 3122 * if UsingAArch32() then 3123 * return AArch32.GenerateDebugExceptions() 3124 * else 3125 * return AArch64.GenerateDebugExceptions() 3126 * We choose to push the if() down into this function for clarity, 3127 * since the pseudocode has it at all callsites except for the one in 3128 * CheckSoftwareStep(), where it is elided because both branches would 3129 * always return the same value. 3130 */ 3131 static inline bool arm_generate_debug_exceptions(CPUARMState *env) 3132 { 3133 if (env->aarch64) { 3134 return aa64_generate_debug_exceptions(env); 3135 } else { 3136 return aa32_generate_debug_exceptions(env); 3137 } 3138 } 3139 3140 /* Is single-stepping active? (Note that the "is EL_D AArch64?" check 3141 * implicitly means this always returns false in pre-v8 CPUs.) 3142 */ 3143 static inline bool arm_singlestep_active(CPUARMState *env) 3144 { 3145 return extract32(env->cp15.mdscr_el1, 0, 1) 3146 && arm_el_is_aa64(env, arm_debug_target_el(env)) 3147 && arm_generate_debug_exceptions(env); 3148 } 3149 3150 static inline bool arm_sctlr_b(CPUARMState *env) 3151 { 3152 return 3153 /* We need not implement SCTLR.ITD in user-mode emulation, so 3154 * let linux-user ignore the fact that it conflicts with SCTLR_B. 3155 * This lets people run BE32 binaries with "-cpu any". 3156 */ 3157 #ifndef CONFIG_USER_ONLY 3158 !arm_feature(env, ARM_FEATURE_V7) && 3159 #endif 3160 (env->cp15.sctlr_el[1] & SCTLR_B) != 0; 3161 } 3162 3163 uint64_t arm_sctlr(CPUARMState *env, int el); 3164 3165 static inline bool arm_cpu_data_is_big_endian_a32(CPUARMState *env, 3166 bool sctlr_b) 3167 { 3168 #ifdef CONFIG_USER_ONLY 3169 /* 3170 * In system mode, BE32 is modelled in line with the 3171 * architecture (as word-invariant big-endianness), where loads 3172 * and stores are done little endian but from addresses which 3173 * are adjusted by XORing with the appropriate constant. So the 3174 * endianness to use for the raw data access is not affected by 3175 * SCTLR.B. 3176 * In user mode, however, we model BE32 as byte-invariant 3177 * big-endianness (because user-only code cannot tell the 3178 * difference), and so we need to use a data access endianness 3179 * that depends on SCTLR.B. 3180 */ 3181 if (sctlr_b) { 3182 return true; 3183 } 3184 #endif 3185 /* In 32bit endianness is determined by looking at CPSR's E bit */ 3186 return env->uncached_cpsr & CPSR_E; 3187 } 3188 3189 static inline bool arm_cpu_data_is_big_endian_a64(int el, uint64_t sctlr) 3190 { 3191 return sctlr & (el ? SCTLR_EE : SCTLR_E0E); 3192 } 3193 3194 /* Return true if the processor is in big-endian mode. */ 3195 static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) 3196 { 3197 if (!is_a64(env)) { 3198 return arm_cpu_data_is_big_endian_a32(env, arm_sctlr_b(env)); 3199 } else { 3200 int cur_el = arm_current_el(env); 3201 uint64_t sctlr = arm_sctlr(env, cur_el); 3202 return arm_cpu_data_is_big_endian_a64(cur_el, sctlr); 3203 } 3204 } 3205 3206 typedef CPUARMState CPUArchState; 3207 typedef ARMCPU ArchCPU; 3208 3209 #include "exec/cpu-all.h" 3210 3211 /* 3212 * Bit usage in the TB flags field: bit 31 indicates whether we are 3213 * in 32 or 64 bit mode. The meaning of the other bits depends on that. 3214 * We put flags which are shared between 32 and 64 bit mode at the top 3215 * of the word, and flags which apply to only one mode at the bottom. 3216 * 3217 * 31 20 18 14 9 0 3218 * +--------------+-----+-----+----------+--------------+ 3219 * | | | TBFLAG_A32 | | 3220 * | | +-----+----------+ TBFLAG_AM32 | 3221 * | TBFLAG_ANY | |TBFLAG_M32| | 3222 * | +-----------+----------+--------------| 3223 * | | TBFLAG_A64 | 3224 * +--------------+-------------------------------------+ 3225 * 31 20 0 3226 * 3227 * Unless otherwise noted, these bits are cached in env->hflags. 3228 */ 3229 FIELD(TBFLAG_ANY, AARCH64_STATE, 31, 1) 3230 FIELD(TBFLAG_ANY, SS_ACTIVE, 30, 1) 3231 FIELD(TBFLAG_ANY, PSTATE_SS, 29, 1) /* Not cached. */ 3232 FIELD(TBFLAG_ANY, BE_DATA, 28, 1) 3233 FIELD(TBFLAG_ANY, MMUIDX, 24, 4) 3234 /* Target EL if we take a floating-point-disabled exception */ 3235 FIELD(TBFLAG_ANY, FPEXC_EL, 22, 2) 3236 /* For A-profile only, target EL for debug exceptions. */ 3237 FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 20, 2) 3238 3239 /* 3240 * Bit usage when in AArch32 state, both A- and M-profile. 3241 */ 3242 FIELD(TBFLAG_AM32, CONDEXEC, 0, 8) /* Not cached. */ 3243 FIELD(TBFLAG_AM32, THUMB, 8, 1) /* Not cached. */ 3244 3245 /* 3246 * Bit usage when in AArch32 state, for A-profile only. 3247 */ 3248 FIELD(TBFLAG_A32, VECLEN, 9, 3) /* Not cached. */ 3249 FIELD(TBFLAG_A32, VECSTRIDE, 12, 2) /* Not cached. */ 3250 /* 3251 * We store the bottom two bits of the CPAR as TB flags and handle 3252 * checks on the other bits at runtime. This shares the same bits as 3253 * VECSTRIDE, which is OK as no XScale CPU has VFP. 3254 * Not cached, because VECLEN+VECSTRIDE are not cached. 3255 */ 3256 FIELD(TBFLAG_A32, XSCALE_CPAR, 12, 2) 3257 FIELD(TBFLAG_A32, VFPEN, 14, 1) /* Partially cached, minus FPEXC. */ 3258 FIELD(TBFLAG_A32, SCTLR_B, 15, 1) 3259 FIELD(TBFLAG_A32, HSTR_ACTIVE, 16, 1) 3260 /* 3261 * Indicates whether cp register reads and writes by guest code should access 3262 * the secure or nonsecure bank of banked registers; note that this is not 3263 * the same thing as the current security state of the processor! 3264 */ 3265 FIELD(TBFLAG_A32, NS, 17, 1) 3266 3267 /* 3268 * Bit usage when in AArch32 state, for M-profile only. 3269 */ 3270 /* Handler (ie not Thread) mode */ 3271 FIELD(TBFLAG_M32, HANDLER, 9, 1) 3272 /* Whether we should generate stack-limit checks */ 3273 FIELD(TBFLAG_M32, STACKCHECK, 10, 1) 3274 /* Set if FPCCR.LSPACT is set */ 3275 FIELD(TBFLAG_M32, LSPACT, 11, 1) /* Not cached. */ 3276 /* Set if we must create a new FP context */ 3277 FIELD(TBFLAG_M32, NEW_FP_CTXT_NEEDED, 12, 1) /* Not cached. */ 3278 /* Set if FPCCR.S does not match current security state */ 3279 FIELD(TBFLAG_M32, FPCCR_S_WRONG, 13, 1) /* Not cached. */ 3280 3281 /* 3282 * Bit usage when in AArch64 state 3283 */ 3284 FIELD(TBFLAG_A64, TBII, 0, 2) 3285 FIELD(TBFLAG_A64, SVEEXC_EL, 2, 2) 3286 FIELD(TBFLAG_A64, ZCR_LEN, 4, 4) 3287 FIELD(TBFLAG_A64, PAUTH_ACTIVE, 8, 1) 3288 FIELD(TBFLAG_A64, BT, 9, 1) 3289 FIELD(TBFLAG_A64, BTYPE, 10, 2) /* Not cached. */ 3290 FIELD(TBFLAG_A64, TBID, 12, 2) 3291 FIELD(TBFLAG_A64, UNPRIV, 14, 1) 3292 FIELD(TBFLAG_A64, ATA, 15, 1) 3293 FIELD(TBFLAG_A64, TCMA, 16, 2) 3294 FIELD(TBFLAG_A64, MTE_ACTIVE, 18, 1) 3295 FIELD(TBFLAG_A64, MTE0_ACTIVE, 19, 1) 3296 3297 /** 3298 * cpu_mmu_index: 3299 * @env: The cpu environment 3300 * @ifetch: True for code access, false for data access. 3301 * 3302 * Return the core mmu index for the current translation regime. 3303 * This function is used by generic TCG code paths. 3304 */ 3305 static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) 3306 { 3307 return FIELD_EX32(env->hflags, TBFLAG_ANY, MMUIDX); 3308 } 3309 3310 static inline bool bswap_code(bool sctlr_b) 3311 { 3312 #ifdef CONFIG_USER_ONLY 3313 /* BE8 (SCTLR.B = 0, TARGET_WORDS_BIGENDIAN = 1) is mixed endian. 3314 * The invalid combination SCTLR.B=1/CPSR.E=1/TARGET_WORDS_BIGENDIAN=0 3315 * would also end up as a mixed-endian mode with BE code, LE data. 3316 */ 3317 return 3318 #ifdef TARGET_WORDS_BIGENDIAN 3319 1 ^ 3320 #endif 3321 sctlr_b; 3322 #else 3323 /* All code access in ARM is little endian, and there are no loaders 3324 * doing swaps that need to be reversed 3325 */ 3326 return 0; 3327 #endif 3328 } 3329 3330 #ifdef CONFIG_USER_ONLY 3331 static inline bool arm_cpu_bswap_data(CPUARMState *env) 3332 { 3333 return 3334 #ifdef TARGET_WORDS_BIGENDIAN 3335 1 ^ 3336 #endif 3337 arm_cpu_data_is_big_endian(env); 3338 } 3339 #endif 3340 3341 void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, 3342 target_ulong *cs_base, uint32_t *flags); 3343 3344 enum { 3345 QEMU_PSCI_CONDUIT_DISABLED = 0, 3346 QEMU_PSCI_CONDUIT_SMC = 1, 3347 QEMU_PSCI_CONDUIT_HVC = 2, 3348 }; 3349 3350 #ifndef CONFIG_USER_ONLY 3351 /* Return the address space index to use for a memory access */ 3352 static inline int arm_asidx_from_attrs(CPUState *cs, MemTxAttrs attrs) 3353 { 3354 return attrs.secure ? ARMASIdx_S : ARMASIdx_NS; 3355 } 3356 3357 /* Return the AddressSpace to use for a memory access 3358 * (which depends on whether the access is S or NS, and whether 3359 * the board gave us a separate AddressSpace for S accesses). 3360 */ 3361 static inline AddressSpace *arm_addressspace(CPUState *cs, MemTxAttrs attrs) 3362 { 3363 return cpu_get_address_space(cs, arm_asidx_from_attrs(cs, attrs)); 3364 } 3365 #endif 3366 3367 /** 3368 * arm_register_pre_el_change_hook: 3369 * Register a hook function which will be called immediately before this 3370 * CPU changes exception level or mode. The hook function will be 3371 * passed a pointer to the ARMCPU and the opaque data pointer passed 3372 * to this function when the hook was registered. 3373 * 3374 * Note that if a pre-change hook is called, any registered post-change hooks 3375 * are guaranteed to subsequently be called. 3376 */ 3377 void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, 3378 void *opaque); 3379 /** 3380 * arm_register_el_change_hook: 3381 * Register a hook function which will be called immediately after this 3382 * CPU changes exception level or mode. The hook function will be 3383 * passed a pointer to the ARMCPU and the opaque data pointer passed 3384 * to this function when the hook was registered. 3385 * 3386 * Note that any registered hooks registered here are guaranteed to be called 3387 * if pre-change hooks have been. 3388 */ 3389 void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void 3390 *opaque); 3391 3392 /** 3393 * arm_rebuild_hflags: 3394 * Rebuild the cached TBFLAGS for arbitrary changed processor state. 3395 */ 3396 void arm_rebuild_hflags(CPUARMState *env); 3397 3398 /** 3399 * aa32_vfp_dreg: 3400 * Return a pointer to the Dn register within env in 32-bit mode. 3401 */ 3402 static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno) 3403 { 3404 return &env->vfp.zregs[regno >> 1].d[regno & 1]; 3405 } 3406 3407 /** 3408 * aa32_vfp_qreg: 3409 * Return a pointer to the Qn register within env in 32-bit mode. 3410 */ 3411 static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno) 3412 { 3413 return &env->vfp.zregs[regno].d[0]; 3414 } 3415 3416 /** 3417 * aa64_vfp_qreg: 3418 * Return a pointer to the Qn register within env in 64-bit mode. 3419 */ 3420 static inline uint64_t *aa64_vfp_qreg(CPUARMState *env, unsigned regno) 3421 { 3422 return &env->vfp.zregs[regno].d[0]; 3423 } 3424 3425 /* Shared between translate-sve.c and sve_helper.c. */ 3426 extern const uint64_t pred_esz_masks[4]; 3427 3428 /* Helper for the macros below, validating the argument type. */ 3429 static inline MemTxAttrs *typecheck_memtxattrs(MemTxAttrs *x) 3430 { 3431 return x; 3432 } 3433 3434 /* 3435 * Lvalue macros for ARM TLB bits that we must cache in the TCG TLB. 3436 * Using these should be a bit more self-documenting than using the 3437 * generic target bits directly. 3438 */ 3439 #define arm_tlb_bti_gp(x) (typecheck_memtxattrs(x)->target_tlb_bit0) 3440 #define arm_tlb_mte_tagged(x) (typecheck_memtxattrs(x)->target_tlb_bit1) 3441 3442 /* 3443 * Naming convention for isar_feature functions: 3444 * Functions which test 32-bit ID registers should have _aa32_ in 3445 * their name. Functions which test 64-bit ID registers should have 3446 * _aa64_ in their name. These must only be used in code where we 3447 * know for certain that the CPU has AArch32 or AArch64 respectively 3448 * or where the correct answer for a CPU which doesn't implement that 3449 * CPU state is "false" (eg when generating A32 or A64 code, if adding 3450 * system registers that are specific to that CPU state, for "should 3451 * we let this system register bit be set" tests where the 32-bit 3452 * flavour of the register doesn't have the bit, and so on). 3453 * Functions which simply ask "does this feature exist at all" have 3454 * _any_ in their name, and always return the logical OR of the _aa64_ 3455 * and the _aa32_ function. 3456 */ 3457 3458 /* 3459 * 32-bit feature tests via id registers. 3460 */ 3461 static inline bool isar_feature_aa32_thumb_div(const ARMISARegisters *id) 3462 { 3463 return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) != 0; 3464 } 3465 3466 static inline bool isar_feature_aa32_arm_div(const ARMISARegisters *id) 3467 { 3468 return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) > 1; 3469 } 3470 3471 static inline bool isar_feature_aa32_jazelle(const ARMISARegisters *id) 3472 { 3473 return FIELD_EX32(id->id_isar1, ID_ISAR1, JAZELLE) != 0; 3474 } 3475 3476 static inline bool isar_feature_aa32_aes(const ARMISARegisters *id) 3477 { 3478 return FIELD_EX32(id->id_isar5, ID_ISAR5, AES) != 0; 3479 } 3480 3481 static inline bool isar_feature_aa32_pmull(const ARMISARegisters *id) 3482 { 3483 return FIELD_EX32(id->id_isar5, ID_ISAR5, AES) > 1; 3484 } 3485 3486 static inline bool isar_feature_aa32_sha1(const ARMISARegisters *id) 3487 { 3488 return FIELD_EX32(id->id_isar5, ID_ISAR5, SHA1) != 0; 3489 } 3490 3491 static inline bool isar_feature_aa32_sha2(const ARMISARegisters *id) 3492 { 3493 return FIELD_EX32(id->id_isar5, ID_ISAR5, SHA2) != 0; 3494 } 3495 3496 static inline bool isar_feature_aa32_crc32(const ARMISARegisters *id) 3497 { 3498 return FIELD_EX32(id->id_isar5, ID_ISAR5, CRC32) != 0; 3499 } 3500 3501 static inline bool isar_feature_aa32_rdm(const ARMISARegisters *id) 3502 { 3503 return FIELD_EX32(id->id_isar5, ID_ISAR5, RDM) != 0; 3504 } 3505 3506 static inline bool isar_feature_aa32_vcma(const ARMISARegisters *id) 3507 { 3508 return FIELD_EX32(id->id_isar5, ID_ISAR5, VCMA) != 0; 3509 } 3510 3511 static inline bool isar_feature_aa32_jscvt(const ARMISARegisters *id) 3512 { 3513 return FIELD_EX32(id->id_isar6, ID_ISAR6, JSCVT) != 0; 3514 } 3515 3516 static inline bool isar_feature_aa32_dp(const ARMISARegisters *id) 3517 { 3518 return FIELD_EX32(id->id_isar6, ID_ISAR6, DP) != 0; 3519 } 3520 3521 static inline bool isar_feature_aa32_fhm(const ARMISARegisters *id) 3522 { 3523 return FIELD_EX32(id->id_isar6, ID_ISAR6, FHM) != 0; 3524 } 3525 3526 static inline bool isar_feature_aa32_sb(const ARMISARegisters *id) 3527 { 3528 return FIELD_EX32(id->id_isar6, ID_ISAR6, SB) != 0; 3529 } 3530 3531 static inline bool isar_feature_aa32_predinv(const ARMISARegisters *id) 3532 { 3533 return FIELD_EX32(id->id_isar6, ID_ISAR6, SPECRES) != 0; 3534 } 3535 3536 static inline bool isar_feature_aa32_mprofile(const ARMISARegisters *id) 3537 { 3538 return FIELD_EX32(id->id_pfr1, ID_PFR1, MPROGMOD) != 0; 3539 } 3540 3541 static inline bool isar_feature_aa32_fp16_arith(const ARMISARegisters *id) 3542 { 3543 /* Sadly this is encoded differently for A-profile and M-profile */ 3544 if (isar_feature_aa32_mprofile(id)) { 3545 return FIELD_EX32(id->mvfr1, MVFR1, FP16) > 0; 3546 } else { 3547 return FIELD_EX32(id->mvfr1, MVFR1, FPHP) >= 3; 3548 } 3549 } 3550 3551 static inline bool isar_feature_aa32_vfp_simd(const ARMISARegisters *id) 3552 { 3553 /* 3554 * Return true if either VFP or SIMD is implemented. 3555 * In this case, a minimum of VFP w/ D0-D15. 3556 */ 3557 return FIELD_EX32(id->mvfr0, MVFR0, SIMDREG) > 0; 3558 } 3559 3560 static inline bool isar_feature_aa32_simd_r32(const ARMISARegisters *id) 3561 { 3562 /* Return true if D16-D31 are implemented */ 3563 return FIELD_EX32(id->mvfr0, MVFR0, SIMDREG) >= 2; 3564 } 3565 3566 static inline bool isar_feature_aa32_fpshvec(const ARMISARegisters *id) 3567 { 3568 return FIELD_EX32(id->mvfr0, MVFR0, FPSHVEC) > 0; 3569 } 3570 3571 static inline bool isar_feature_aa32_fpsp_v2(const ARMISARegisters *id) 3572 { 3573 /* Return true if CPU supports single precision floating point, VFPv2 */ 3574 return FIELD_EX32(id->mvfr0, MVFR0, FPSP) > 0; 3575 } 3576 3577 static inline bool isar_feature_aa32_fpsp_v3(const ARMISARegisters *id) 3578 { 3579 /* Return true if CPU supports single precision floating point, VFPv3 */ 3580 return FIELD_EX32(id->mvfr0, MVFR0, FPSP) >= 2; 3581 } 3582 3583 static inline bool isar_feature_aa32_fpdp_v2(const ARMISARegisters *id) 3584 { 3585 /* Return true if CPU supports double precision floating point, VFPv2 */ 3586 return FIELD_EX32(id->mvfr0, MVFR0, FPDP) > 0; 3587 } 3588 3589 static inline bool isar_feature_aa32_fpdp_v3(const ARMISARegisters *id) 3590 { 3591 /* Return true if CPU supports double precision floating point, VFPv3 */ 3592 return FIELD_EX32(id->mvfr0, MVFR0, FPDP) >= 2; 3593 } 3594 3595 static inline bool isar_feature_aa32_vfp(const ARMISARegisters *id) 3596 { 3597 return isar_feature_aa32_fpsp_v2(id) || isar_feature_aa32_fpdp_v2(id); 3598 } 3599 3600 /* 3601 * We always set the FP and SIMD FP16 fields to indicate identical 3602 * levels of support (assuming SIMD is implemented at all), so 3603 * we only need one set of accessors. 3604 */ 3605 static inline bool isar_feature_aa32_fp16_spconv(const ARMISARegisters *id) 3606 { 3607 return FIELD_EX32(id->mvfr1, MVFR1, FPHP) > 0; 3608 } 3609 3610 static inline bool isar_feature_aa32_fp16_dpconv(const ARMISARegisters *id) 3611 { 3612 return FIELD_EX32(id->mvfr1, MVFR1, FPHP) > 1; 3613 } 3614 3615 /* 3616 * Note that this ID register field covers both VFP and Neon FMAC, 3617 * so should usually be tested in combination with some other 3618 * check that confirms the presence of whichever of VFP or Neon is 3619 * relevant, to avoid accidentally enabling a Neon feature on 3620 * a VFP-no-Neon core or vice-versa. 3621 */ 3622 static inline bool isar_feature_aa32_simdfmac(const ARMISARegisters *id) 3623 { 3624 return FIELD_EX32(id->mvfr1, MVFR1, SIMDFMAC) != 0; 3625 } 3626 3627 static inline bool isar_feature_aa32_vsel(const ARMISARegisters *id) 3628 { 3629 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 1; 3630 } 3631 3632 static inline bool isar_feature_aa32_vcvt_dr(const ARMISARegisters *id) 3633 { 3634 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 2; 3635 } 3636 3637 static inline bool isar_feature_aa32_vrint(const ARMISARegisters *id) 3638 { 3639 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 3; 3640 } 3641 3642 static inline bool isar_feature_aa32_vminmaxnm(const ARMISARegisters *id) 3643 { 3644 return FIELD_EX32(id->mvfr2, MVFR2, FPMISC) >= 4; 3645 } 3646 3647 static inline bool isar_feature_aa32_pxn(const ARMISARegisters *id) 3648 { 3649 return FIELD_EX32(id->id_mmfr0, ID_MMFR0, VMSA) >= 4; 3650 } 3651 3652 static inline bool isar_feature_aa32_pan(const ARMISARegisters *id) 3653 { 3654 return FIELD_EX32(id->id_mmfr3, ID_MMFR3, PAN) != 0; 3655 } 3656 3657 static inline bool isar_feature_aa32_ats1e1(const ARMISARegisters *id) 3658 { 3659 return FIELD_EX32(id->id_mmfr3, ID_MMFR3, PAN) >= 2; 3660 } 3661 3662 static inline bool isar_feature_aa32_pmu_8_1(const ARMISARegisters *id) 3663 { 3664 /* 0xf means "non-standard IMPDEF PMU" */ 3665 return FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) >= 4 && 3666 FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) != 0xf; 3667 } 3668 3669 static inline bool isar_feature_aa32_pmu_8_4(const ARMISARegisters *id) 3670 { 3671 /* 0xf means "non-standard IMPDEF PMU" */ 3672 return FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) >= 5 && 3673 FIELD_EX32(id->id_dfr0, ID_DFR0, PERFMON) != 0xf; 3674 } 3675 3676 static inline bool isar_feature_aa32_hpd(const ARMISARegisters *id) 3677 { 3678 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, HPDS) != 0; 3679 } 3680 3681 static inline bool isar_feature_aa32_ac2(const ARMISARegisters *id) 3682 { 3683 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, AC2) != 0; 3684 } 3685 3686 static inline bool isar_feature_aa32_ccidx(const ARMISARegisters *id) 3687 { 3688 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, CCIDX) != 0; 3689 } 3690 3691 static inline bool isar_feature_aa32_tts2uxn(const ARMISARegisters *id) 3692 { 3693 return FIELD_EX32(id->id_mmfr4, ID_MMFR4, XNX) != 0; 3694 } 3695 3696 /* 3697 * 64-bit feature tests via id registers. 3698 */ 3699 static inline bool isar_feature_aa64_aes(const ARMISARegisters *id) 3700 { 3701 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, AES) != 0; 3702 } 3703 3704 static inline bool isar_feature_aa64_pmull(const ARMISARegisters *id) 3705 { 3706 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, AES) > 1; 3707 } 3708 3709 static inline bool isar_feature_aa64_sha1(const ARMISARegisters *id) 3710 { 3711 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA1) != 0; 3712 } 3713 3714 static inline bool isar_feature_aa64_sha256(const ARMISARegisters *id) 3715 { 3716 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA2) != 0; 3717 } 3718 3719 static inline bool isar_feature_aa64_sha512(const ARMISARegisters *id) 3720 { 3721 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA2) > 1; 3722 } 3723 3724 static inline bool isar_feature_aa64_crc32(const ARMISARegisters *id) 3725 { 3726 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, CRC32) != 0; 3727 } 3728 3729 static inline bool isar_feature_aa64_atomics(const ARMISARegisters *id) 3730 { 3731 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, ATOMIC) != 0; 3732 } 3733 3734 static inline bool isar_feature_aa64_rdm(const ARMISARegisters *id) 3735 { 3736 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, RDM) != 0; 3737 } 3738 3739 static inline bool isar_feature_aa64_sha3(const ARMISARegisters *id) 3740 { 3741 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA3) != 0; 3742 } 3743 3744 static inline bool isar_feature_aa64_sm3(const ARMISARegisters *id) 3745 { 3746 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SM3) != 0; 3747 } 3748 3749 static inline bool isar_feature_aa64_sm4(const ARMISARegisters *id) 3750 { 3751 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SM4) != 0; 3752 } 3753 3754 static inline bool isar_feature_aa64_dp(const ARMISARegisters *id) 3755 { 3756 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, DP) != 0; 3757 } 3758 3759 static inline bool isar_feature_aa64_fhm(const ARMISARegisters *id) 3760 { 3761 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, FHM) != 0; 3762 } 3763 3764 static inline bool isar_feature_aa64_condm_4(const ARMISARegisters *id) 3765 { 3766 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, TS) != 0; 3767 } 3768 3769 static inline bool isar_feature_aa64_condm_5(const ARMISARegisters *id) 3770 { 3771 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, TS) >= 2; 3772 } 3773 3774 static inline bool isar_feature_aa64_rndr(const ARMISARegisters *id) 3775 { 3776 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, RNDR) != 0; 3777 } 3778 3779 static inline bool isar_feature_aa64_jscvt(const ARMISARegisters *id) 3780 { 3781 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, JSCVT) != 0; 3782 } 3783 3784 static inline bool isar_feature_aa64_fcma(const ARMISARegisters *id) 3785 { 3786 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, FCMA) != 0; 3787 } 3788 3789 static inline bool isar_feature_aa64_pauth(const ARMISARegisters *id) 3790 { 3791 /* 3792 * Note that while QEMU will only implement the architected algorithm 3793 * QARMA, and thus APA+GPA, the host cpu for kvm may use implementation 3794 * defined algorithms, and thus API+GPI, and this predicate controls 3795 * migration of the 128-bit keys. 3796 */ 3797 return (id->id_aa64isar1 & 3798 (FIELD_DP64(0, ID_AA64ISAR1, APA, 0xf) | 3799 FIELD_DP64(0, ID_AA64ISAR1, API, 0xf) | 3800 FIELD_DP64(0, ID_AA64ISAR1, GPA, 0xf) | 3801 FIELD_DP64(0, ID_AA64ISAR1, GPI, 0xf))) != 0; 3802 } 3803 3804 static inline bool isar_feature_aa64_sb(const ARMISARegisters *id) 3805 { 3806 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, SB) != 0; 3807 } 3808 3809 static inline bool isar_feature_aa64_predinv(const ARMISARegisters *id) 3810 { 3811 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, SPECRES) != 0; 3812 } 3813 3814 static inline bool isar_feature_aa64_frint(const ARMISARegisters *id) 3815 { 3816 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, FRINTTS) != 0; 3817 } 3818 3819 static inline bool isar_feature_aa64_dcpop(const ARMISARegisters *id) 3820 { 3821 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) != 0; 3822 } 3823 3824 static inline bool isar_feature_aa64_dcpodp(const ARMISARegisters *id) 3825 { 3826 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, DPB) >= 2; 3827 } 3828 3829 static inline bool isar_feature_aa64_fp_simd(const ARMISARegisters *id) 3830 { 3831 /* We always set the AdvSIMD and FP fields identically. */ 3832 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) != 0xf; 3833 } 3834 3835 static inline bool isar_feature_aa64_fp16(const ARMISARegisters *id) 3836 { 3837 /* We always set the AdvSIMD and FP fields identically wrt FP16. */ 3838 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) == 1; 3839 } 3840 3841 static inline bool isar_feature_aa64_aa32(const ARMISARegisters *id) 3842 { 3843 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, EL0) >= 2; 3844 } 3845 3846 static inline bool isar_feature_aa64_sve(const ARMISARegisters *id) 3847 { 3848 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SVE) != 0; 3849 } 3850 3851 static inline bool isar_feature_aa64_vh(const ARMISARegisters *id) 3852 { 3853 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, VH) != 0; 3854 } 3855 3856 static inline bool isar_feature_aa64_lor(const ARMISARegisters *id) 3857 { 3858 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, LO) != 0; 3859 } 3860 3861 static inline bool isar_feature_aa64_pan(const ARMISARegisters *id) 3862 { 3863 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, PAN) != 0; 3864 } 3865 3866 static inline bool isar_feature_aa64_ats1e1(const ARMISARegisters *id) 3867 { 3868 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, PAN) >= 2; 3869 } 3870 3871 static inline bool isar_feature_aa64_uao(const ARMISARegisters *id) 3872 { 3873 return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, UAO) != 0; 3874 } 3875 3876 static inline bool isar_feature_aa64_bti(const ARMISARegisters *id) 3877 { 3878 return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, BT) != 0; 3879 } 3880 3881 static inline bool isar_feature_aa64_mte_insn_reg(const ARMISARegisters *id) 3882 { 3883 return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, MTE) != 0; 3884 } 3885 3886 static inline bool isar_feature_aa64_mte(const ARMISARegisters *id) 3887 { 3888 return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, MTE) >= 2; 3889 } 3890 3891 static inline bool isar_feature_aa64_pmu_8_1(const ARMISARegisters *id) 3892 { 3893 return FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) >= 4 && 3894 FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) != 0xf; 3895 } 3896 3897 static inline bool isar_feature_aa64_pmu_8_4(const ARMISARegisters *id) 3898 { 3899 return FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) >= 5 && 3900 FIELD_EX64(id->id_aa64dfr0, ID_AA64DFR0, PMUVER) != 0xf; 3901 } 3902 3903 static inline bool isar_feature_aa64_rcpc_8_3(const ARMISARegisters *id) 3904 { 3905 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) != 0; 3906 } 3907 3908 static inline bool isar_feature_aa64_rcpc_8_4(const ARMISARegisters *id) 3909 { 3910 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, LRCPC) >= 2; 3911 } 3912 3913 static inline bool isar_feature_aa64_ccidx(const ARMISARegisters *id) 3914 { 3915 return FIELD_EX64(id->id_aa64mmfr2, ID_AA64MMFR2, CCIDX) != 0; 3916 } 3917 3918 static inline bool isar_feature_aa64_tts2uxn(const ARMISARegisters *id) 3919 { 3920 return FIELD_EX64(id->id_aa64mmfr1, ID_AA64MMFR1, XNX) != 0; 3921 } 3922 3923 /* 3924 * Feature tests for "does this exist in either 32-bit or 64-bit?" 3925 */ 3926 static inline bool isar_feature_any_fp16(const ARMISARegisters *id) 3927 { 3928 return isar_feature_aa64_fp16(id) || isar_feature_aa32_fp16_arith(id); 3929 } 3930 3931 static inline bool isar_feature_any_predinv(const ARMISARegisters *id) 3932 { 3933 return isar_feature_aa64_predinv(id) || isar_feature_aa32_predinv(id); 3934 } 3935 3936 static inline bool isar_feature_any_pmu_8_1(const ARMISARegisters *id) 3937 { 3938 return isar_feature_aa64_pmu_8_1(id) || isar_feature_aa32_pmu_8_1(id); 3939 } 3940 3941 static inline bool isar_feature_any_pmu_8_4(const ARMISARegisters *id) 3942 { 3943 return isar_feature_aa64_pmu_8_4(id) || isar_feature_aa32_pmu_8_4(id); 3944 } 3945 3946 static inline bool isar_feature_any_ccidx(const ARMISARegisters *id) 3947 { 3948 return isar_feature_aa64_ccidx(id) || isar_feature_aa32_ccidx(id); 3949 } 3950 3951 static inline bool isar_feature_any_tts2uxn(const ARMISARegisters *id) 3952 { 3953 return isar_feature_aa64_tts2uxn(id) || isar_feature_aa32_tts2uxn(id); 3954 } 3955 3956 /* 3957 * Forward to the above feature tests given an ARMCPU pointer. 3958 */ 3959 #define cpu_isar_feature(name, cpu) \ 3960 ({ ARMCPU *cpu_ = (cpu); isar_feature_##name(&cpu_->isar); }) 3961 3962 #endif 3963