1 /* 2 * ARM virtual CPU header 3 * 4 * Copyright (c) 2003 Fabrice Bellard 5 * 6 * This library is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU Lesser General Public 8 * License as published by the Free Software Foundation; either 9 * version 2 of the License, or (at your option) any later version. 10 * 11 * This library is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * Lesser General Public License for more details. 15 * 16 * You should have received a copy of the GNU Lesser General Public 17 * License along with this library; if not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 #ifndef ARM_CPU_H 21 #define ARM_CPU_H 22 23 #include "kvm-consts.h" 24 #include "hw/registerfields.h" 25 26 #if defined(TARGET_AARCH64) 27 /* AArch64 definitions */ 28 # define TARGET_LONG_BITS 64 29 #else 30 # define TARGET_LONG_BITS 32 31 #endif 32 33 /* ARM processors have a weak memory model */ 34 #define TCG_GUEST_DEFAULT_MO (0) 35 36 #define CPUArchState struct CPUARMState 37 38 #include "qemu-common.h" 39 #include "cpu-qom.h" 40 #include "exec/cpu-defs.h" 41 42 #define EXCP_UDEF 1 /* undefined instruction */ 43 #define EXCP_SWI 2 /* software interrupt */ 44 #define EXCP_PREFETCH_ABORT 3 45 #define EXCP_DATA_ABORT 4 46 #define EXCP_IRQ 5 47 #define EXCP_FIQ 6 48 #define EXCP_BKPT 7 49 #define EXCP_EXCEPTION_EXIT 8 /* Return from v7M exception. */ 50 #define EXCP_KERNEL_TRAP 9 /* Jumped to kernel code page. */ 51 #define EXCP_HVC 11 /* HyperVisor Call */ 52 #define EXCP_HYP_TRAP 12 53 #define EXCP_SMC 13 /* Secure Monitor Call */ 54 #define EXCP_VIRQ 14 55 #define EXCP_VFIQ 15 56 #define EXCP_SEMIHOST 16 /* semihosting call */ 57 #define EXCP_NOCP 17 /* v7M NOCP UsageFault */ 58 #define EXCP_INVSTATE 18 /* v7M INVSTATE UsageFault */ 59 #define EXCP_STKOF 19 /* v8M STKOF UsageFault */ 60 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ 61 62 #define ARMV7M_EXCP_RESET 1 63 #define ARMV7M_EXCP_NMI 2 64 #define ARMV7M_EXCP_HARD 3 65 #define ARMV7M_EXCP_MEM 4 66 #define ARMV7M_EXCP_BUS 5 67 #define ARMV7M_EXCP_USAGE 6 68 #define ARMV7M_EXCP_SECURE 7 69 #define ARMV7M_EXCP_SVC 11 70 #define ARMV7M_EXCP_DEBUG 12 71 #define ARMV7M_EXCP_PENDSV 14 72 #define ARMV7M_EXCP_SYSTICK 15 73 74 /* For M profile, some registers are banked secure vs non-secure; 75 * these are represented as a 2-element array where the first element 76 * is the non-secure copy and the second is the secure copy. 77 * When the CPU does not have implement the security extension then 78 * only the first element is used. 79 * This means that the copy for the current security state can be 80 * accessed via env->registerfield[env->v7m.secure] (whether the security 81 * extension is implemented or not). 82 */ 83 enum { 84 M_REG_NS = 0, 85 M_REG_S = 1, 86 M_REG_NUM_BANKS = 2, 87 }; 88 89 /* ARM-specific interrupt pending bits. */ 90 #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 91 #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 92 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 93 94 /* The usual mapping for an AArch64 system register to its AArch32 95 * counterpart is for the 32 bit world to have access to the lower 96 * half only (with writes leaving the upper half untouched). It's 97 * therefore useful to be able to pass TCG the offset of the least 98 * significant half of a uint64_t struct member. 99 */ 100 #ifdef HOST_WORDS_BIGENDIAN 101 #define offsetoflow32(S, M) (offsetof(S, M) + sizeof(uint32_t)) 102 #define offsetofhigh32(S, M) offsetof(S, M) 103 #else 104 #define offsetoflow32(S, M) offsetof(S, M) 105 #define offsetofhigh32(S, M) (offsetof(S, M) + sizeof(uint32_t)) 106 #endif 107 108 /* Meanings of the ARMCPU object's four inbound GPIO lines */ 109 #define ARM_CPU_IRQ 0 110 #define ARM_CPU_FIQ 1 111 #define ARM_CPU_VIRQ 2 112 #define ARM_CPU_VFIQ 3 113 114 #define NB_MMU_MODES 8 115 /* ARM-specific extra insn start words: 116 * 1: Conditional execution bits 117 * 2: Partial exception syndrome for data aborts 118 */ 119 #define TARGET_INSN_START_EXTRA_WORDS 2 120 121 /* The 2nd extra word holding syndrome info for data aborts does not use 122 * the upper 6 bits nor the lower 14 bits. We mask and shift it down to 123 * help the sleb128 encoder do a better job. 124 * When restoring the CPU state, we shift it back up. 125 */ 126 #define ARM_INSN_START_WORD2_MASK ((1 << 26) - 1) 127 #define ARM_INSN_START_WORD2_SHIFT 14 128 129 /* We currently assume float and double are IEEE single and double 130 precision respectively. 131 Doing runtime conversions is tricky because VFP registers may contain 132 integer values (eg. as the result of a FTOSI instruction). 133 s<2n> maps to the least significant half of d<n> 134 s<2n+1> maps to the most significant half of d<n> 135 */ 136 137 /** 138 * DynamicGDBXMLInfo: 139 * @desc: Contains the XML descriptions. 140 * @num_cpregs: Number of the Coprocessor registers seen by GDB. 141 * @cpregs_keys: Array that contains the corresponding Key of 142 * a given cpreg with the same order of the cpreg in the XML description. 143 */ 144 typedef struct DynamicGDBXMLInfo { 145 char *desc; 146 int num_cpregs; 147 uint32_t *cpregs_keys; 148 } DynamicGDBXMLInfo; 149 150 /* CPU state for each instance of a generic timer (in cp15 c14) */ 151 typedef struct ARMGenericTimer { 152 uint64_t cval; /* Timer CompareValue register */ 153 uint64_t ctl; /* Timer Control register */ 154 } ARMGenericTimer; 155 156 #define GTIMER_PHYS 0 157 #define GTIMER_VIRT 1 158 #define GTIMER_HYP 2 159 #define GTIMER_SEC 3 160 #define NUM_GTIMERS 4 161 162 typedef struct { 163 uint64_t raw_tcr; 164 uint32_t mask; 165 uint32_t base_mask; 166 } TCR; 167 168 /* Define a maximum sized vector register. 169 * For 32-bit, this is a 128-bit NEON/AdvSIMD register. 170 * For 64-bit, this is a 2048-bit SVE register. 171 * 172 * Note that the mapping between S, D, and Q views of the register bank 173 * differs between AArch64 and AArch32. 174 * In AArch32: 175 * Qn = regs[n].d[1]:regs[n].d[0] 176 * Dn = regs[n / 2].d[n & 1] 177 * Sn = regs[n / 4].d[n % 4 / 2], 178 * bits 31..0 for even n, and bits 63..32 for odd n 179 * (and regs[16] to regs[31] are inaccessible) 180 * In AArch64: 181 * Zn = regs[n].d[*] 182 * Qn = regs[n].d[1]:regs[n].d[0] 183 * Dn = regs[n].d[0] 184 * Sn = regs[n].d[0] bits 31..0 185 * Hn = regs[n].d[0] bits 15..0 186 * 187 * This corresponds to the architecturally defined mapping between 188 * the two execution states, and means we do not need to explicitly 189 * map these registers when changing states. 190 * 191 * Align the data for use with TCG host vector operations. 192 */ 193 194 #ifdef TARGET_AARCH64 195 # define ARM_MAX_VQ 16 196 #else 197 # define ARM_MAX_VQ 1 198 #endif 199 200 typedef struct ARMVectorReg { 201 uint64_t d[2 * ARM_MAX_VQ] QEMU_ALIGNED(16); 202 } ARMVectorReg; 203 204 /* In AArch32 mode, predicate registers do not exist at all. */ 205 #ifdef TARGET_AARCH64 206 typedef struct ARMPredicateReg { 207 uint64_t p[2 * ARM_MAX_VQ / 8] QEMU_ALIGNED(16); 208 } ARMPredicateReg; 209 #endif 210 211 212 typedef struct CPUARMState { 213 /* Regs for current mode. */ 214 uint32_t regs[16]; 215 216 /* 32/64 switch only happens when taking and returning from 217 * exceptions so the overlap semantics are taken care of then 218 * instead of having a complicated union. 219 */ 220 /* Regs for A64 mode. */ 221 uint64_t xregs[32]; 222 uint64_t pc; 223 /* PSTATE isn't an architectural register for ARMv8. However, it is 224 * convenient for us to assemble the underlying state into a 32 bit format 225 * identical to the architectural format used for the SPSR. (This is also 226 * what the Linux kernel's 'pstate' field in signal handlers and KVM's 227 * 'pstate' register are.) Of the PSTATE bits: 228 * NZCV are kept in the split out env->CF/VF/NF/ZF, (which have the same 229 * semantics as for AArch32, as described in the comments on each field) 230 * nRW (also known as M[4]) is kept, inverted, in env->aarch64 231 * DAIF (exception masks) are kept in env->daif 232 * all other bits are stored in their correct places in env->pstate 233 */ 234 uint32_t pstate; 235 uint32_t aarch64; /* 1 if CPU is in aarch64 state; inverse of PSTATE.nRW */ 236 237 /* Frequently accessed CPSR bits are stored separately for efficiency. 238 This contains all the other bits. Use cpsr_{read,write} to access 239 the whole CPSR. */ 240 uint32_t uncached_cpsr; 241 uint32_t spsr; 242 243 /* Banked registers. */ 244 uint64_t banked_spsr[8]; 245 uint32_t banked_r13[8]; 246 uint32_t banked_r14[8]; 247 248 /* These hold r8-r12. */ 249 uint32_t usr_regs[5]; 250 uint32_t fiq_regs[5]; 251 252 /* cpsr flag cache for faster execution */ 253 uint32_t CF; /* 0 or 1 */ 254 uint32_t VF; /* V is the bit 31. All other bits are undefined */ 255 uint32_t NF; /* N is bit 31. All other bits are undefined. */ 256 uint32_t ZF; /* Z set if zero. */ 257 uint32_t QF; /* 0 or 1 */ 258 uint32_t GE; /* cpsr[19:16] */ 259 uint32_t thumb; /* cpsr[5]. 0 = arm mode, 1 = thumb mode. */ 260 uint32_t condexec_bits; /* IT bits. cpsr[15:10,26:25]. */ 261 uint64_t daif; /* exception masks, in the bits they are in PSTATE */ 262 263 uint64_t elr_el[4]; /* AArch64 exception link regs */ 264 uint64_t sp_el[4]; /* AArch64 banked stack pointers */ 265 266 /* System control coprocessor (cp15) */ 267 struct { 268 uint32_t c0_cpuid; 269 union { /* Cache size selection */ 270 struct { 271 uint64_t _unused_csselr0; 272 uint64_t csselr_ns; 273 uint64_t _unused_csselr1; 274 uint64_t csselr_s; 275 }; 276 uint64_t csselr_el[4]; 277 }; 278 union { /* System control register. */ 279 struct { 280 uint64_t _unused_sctlr; 281 uint64_t sctlr_ns; 282 uint64_t hsctlr; 283 uint64_t sctlr_s; 284 }; 285 uint64_t sctlr_el[4]; 286 }; 287 uint64_t cpacr_el1; /* Architectural feature access control register */ 288 uint64_t cptr_el[4]; /* ARMv8 feature trap registers */ 289 uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */ 290 uint64_t sder; /* Secure debug enable register. */ 291 uint32_t nsacr; /* Non-secure access control register. */ 292 union { /* MMU translation table base 0. */ 293 struct { 294 uint64_t _unused_ttbr0_0; 295 uint64_t ttbr0_ns; 296 uint64_t _unused_ttbr0_1; 297 uint64_t ttbr0_s; 298 }; 299 uint64_t ttbr0_el[4]; 300 }; 301 union { /* MMU translation table base 1. */ 302 struct { 303 uint64_t _unused_ttbr1_0; 304 uint64_t ttbr1_ns; 305 uint64_t _unused_ttbr1_1; 306 uint64_t ttbr1_s; 307 }; 308 uint64_t ttbr1_el[4]; 309 }; 310 uint64_t vttbr_el2; /* Virtualization Translation Table Base. */ 311 /* MMU translation table base control. */ 312 TCR tcr_el[4]; 313 TCR vtcr_el2; /* Virtualization Translation Control. */ 314 uint32_t c2_data; /* MPU data cacheable bits. */ 315 uint32_t c2_insn; /* MPU instruction cacheable bits. */ 316 union { /* MMU domain access control register 317 * MPU write buffer control. 318 */ 319 struct { 320 uint64_t dacr_ns; 321 uint64_t dacr_s; 322 }; 323 struct { 324 uint64_t dacr32_el2; 325 }; 326 }; 327 uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */ 328 uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */ 329 uint64_t hcr_el2; /* Hypervisor configuration register */ 330 uint64_t scr_el3; /* Secure configuration register. */ 331 union { /* Fault status registers. */ 332 struct { 333 uint64_t ifsr_ns; 334 uint64_t ifsr_s; 335 }; 336 struct { 337 uint64_t ifsr32_el2; 338 }; 339 }; 340 union { 341 struct { 342 uint64_t _unused_dfsr; 343 uint64_t dfsr_ns; 344 uint64_t hsr; 345 uint64_t dfsr_s; 346 }; 347 uint64_t esr_el[4]; 348 }; 349 uint32_t c6_region[8]; /* MPU base/size registers. */ 350 union { /* Fault address registers. */ 351 struct { 352 uint64_t _unused_far0; 353 #ifdef HOST_WORDS_BIGENDIAN 354 uint32_t ifar_ns; 355 uint32_t dfar_ns; 356 uint32_t ifar_s; 357 uint32_t dfar_s; 358 #else 359 uint32_t dfar_ns; 360 uint32_t ifar_ns; 361 uint32_t dfar_s; 362 uint32_t ifar_s; 363 #endif 364 uint64_t _unused_far3; 365 }; 366 uint64_t far_el[4]; 367 }; 368 uint64_t hpfar_el2; 369 uint64_t hstr_el2; 370 union { /* Translation result. */ 371 struct { 372 uint64_t _unused_par_0; 373 uint64_t par_ns; 374 uint64_t _unused_par_1; 375 uint64_t par_s; 376 }; 377 uint64_t par_el[4]; 378 }; 379 380 uint32_t c9_insn; /* Cache lockdown registers. */ 381 uint32_t c9_data; 382 uint64_t c9_pmcr; /* performance monitor control register */ 383 uint64_t c9_pmcnten; /* perf monitor counter enables */ 384 uint64_t c9_pmovsr; /* perf monitor overflow status */ 385 uint64_t c9_pmuserenr; /* perf monitor user enable */ 386 uint64_t c9_pmselr; /* perf monitor counter selection register */ 387 uint64_t c9_pminten; /* perf monitor interrupt enables */ 388 union { /* Memory attribute redirection */ 389 struct { 390 #ifdef HOST_WORDS_BIGENDIAN 391 uint64_t _unused_mair_0; 392 uint32_t mair1_ns; 393 uint32_t mair0_ns; 394 uint64_t _unused_mair_1; 395 uint32_t mair1_s; 396 uint32_t mair0_s; 397 #else 398 uint64_t _unused_mair_0; 399 uint32_t mair0_ns; 400 uint32_t mair1_ns; 401 uint64_t _unused_mair_1; 402 uint32_t mair0_s; 403 uint32_t mair1_s; 404 #endif 405 }; 406 uint64_t mair_el[4]; 407 }; 408 union { /* vector base address register */ 409 struct { 410 uint64_t _unused_vbar; 411 uint64_t vbar_ns; 412 uint64_t hvbar; 413 uint64_t vbar_s; 414 }; 415 uint64_t vbar_el[4]; 416 }; 417 uint32_t mvbar; /* (monitor) vector base address register */ 418 struct { /* FCSE PID. */ 419 uint32_t fcseidr_ns; 420 uint32_t fcseidr_s; 421 }; 422 union { /* Context ID. */ 423 struct { 424 uint64_t _unused_contextidr_0; 425 uint64_t contextidr_ns; 426 uint64_t _unused_contextidr_1; 427 uint64_t contextidr_s; 428 }; 429 uint64_t contextidr_el[4]; 430 }; 431 union { /* User RW Thread register. */ 432 struct { 433 uint64_t tpidrurw_ns; 434 uint64_t tpidrprw_ns; 435 uint64_t htpidr; 436 uint64_t _tpidr_el3; 437 }; 438 uint64_t tpidr_el[4]; 439 }; 440 /* The secure banks of these registers don't map anywhere */ 441 uint64_t tpidrurw_s; 442 uint64_t tpidrprw_s; 443 uint64_t tpidruro_s; 444 445 union { /* User RO Thread register. */ 446 uint64_t tpidruro_ns; 447 uint64_t tpidrro_el[1]; 448 }; 449 uint64_t c14_cntfrq; /* Counter Frequency register */ 450 uint64_t c14_cntkctl; /* Timer Control register */ 451 uint32_t cnthctl_el2; /* Counter/Timer Hyp Control register */ 452 uint64_t cntvoff_el2; /* Counter Virtual Offset register */ 453 ARMGenericTimer c14_timer[NUM_GTIMERS]; 454 uint32_t c15_cpar; /* XScale Coprocessor Access Register */ 455 uint32_t c15_ticonfig; /* TI925T configuration byte. */ 456 uint32_t c15_i_max; /* Maximum D-cache dirty line index. */ 457 uint32_t c15_i_min; /* Minimum D-cache dirty line index. */ 458 uint32_t c15_threadid; /* TI debugger thread-ID. */ 459 uint32_t c15_config_base_address; /* SCU base address. */ 460 uint32_t c15_diagnostic; /* diagnostic register */ 461 uint32_t c15_power_diagnostic; 462 uint32_t c15_power_control; /* power control */ 463 uint64_t dbgbvr[16]; /* breakpoint value registers */ 464 uint64_t dbgbcr[16]; /* breakpoint control registers */ 465 uint64_t dbgwvr[16]; /* watchpoint value registers */ 466 uint64_t dbgwcr[16]; /* watchpoint control registers */ 467 uint64_t mdscr_el1; 468 uint64_t oslsr_el1; /* OS Lock Status */ 469 uint64_t mdcr_el2; 470 uint64_t mdcr_el3; 471 /* If the counter is enabled, this stores the last time the counter 472 * was reset. Otherwise it stores the counter value 473 */ 474 uint64_t c15_ccnt; 475 uint64_t pmccfiltr_el0; /* Performance Monitor Filter Register */ 476 uint64_t vpidr_el2; /* Virtualization Processor ID Register */ 477 uint64_t vmpidr_el2; /* Virtualization Multiprocessor ID Register */ 478 } cp15; 479 480 struct { 481 /* M profile has up to 4 stack pointers: 482 * a Main Stack Pointer and a Process Stack Pointer for each 483 * of the Secure and Non-Secure states. (If the CPU doesn't support 484 * the security extension then it has only two SPs.) 485 * In QEMU we always store the currently active SP in regs[13], 486 * and the non-active SP for the current security state in 487 * v7m.other_sp. The stack pointers for the inactive security state 488 * are stored in other_ss_msp and other_ss_psp. 489 * switch_v7m_security_state() is responsible for rearranging them 490 * when we change security state. 491 */ 492 uint32_t other_sp; 493 uint32_t other_ss_msp; 494 uint32_t other_ss_psp; 495 uint32_t vecbase[M_REG_NUM_BANKS]; 496 uint32_t basepri[M_REG_NUM_BANKS]; 497 uint32_t control[M_REG_NUM_BANKS]; 498 uint32_t ccr[M_REG_NUM_BANKS]; /* Configuration and Control */ 499 uint32_t cfsr[M_REG_NUM_BANKS]; /* Configurable Fault Status */ 500 uint32_t hfsr; /* HardFault Status */ 501 uint32_t dfsr; /* Debug Fault Status Register */ 502 uint32_t sfsr; /* Secure Fault Status Register */ 503 uint32_t mmfar[M_REG_NUM_BANKS]; /* MemManage Fault Address */ 504 uint32_t bfar; /* BusFault Address */ 505 uint32_t sfar; /* Secure Fault Address Register */ 506 unsigned mpu_ctrl[M_REG_NUM_BANKS]; /* MPU_CTRL */ 507 int exception; 508 uint32_t primask[M_REG_NUM_BANKS]; 509 uint32_t faultmask[M_REG_NUM_BANKS]; 510 uint32_t aircr; /* only holds r/w state if security extn implemented */ 511 uint32_t secure; /* Is CPU in Secure state? (not guest visible) */ 512 uint32_t csselr[M_REG_NUM_BANKS]; 513 uint32_t scr[M_REG_NUM_BANKS]; 514 uint32_t msplim[M_REG_NUM_BANKS]; 515 uint32_t psplim[M_REG_NUM_BANKS]; 516 } v7m; 517 518 /* Information associated with an exception about to be taken: 519 * code which raises an exception must set cs->exception_index and 520 * the relevant parts of this structure; the cpu_do_interrupt function 521 * will then set the guest-visible registers as part of the exception 522 * entry process. 523 */ 524 struct { 525 uint32_t syndrome; /* AArch64 format syndrome register */ 526 uint32_t fsr; /* AArch32 format fault status register info */ 527 uint64_t vaddress; /* virtual addr associated with exception, if any */ 528 uint32_t target_el; /* EL the exception should be targeted for */ 529 /* If we implement EL2 we will also need to store information 530 * about the intermediate physical address for stage 2 faults. 531 */ 532 } exception; 533 534 /* Information associated with an SError */ 535 struct { 536 uint8_t pending; 537 uint8_t has_esr; 538 uint64_t esr; 539 } serror; 540 541 /* Thumb-2 EE state. */ 542 uint32_t teecr; 543 uint32_t teehbr; 544 545 /* VFP coprocessor state. */ 546 struct { 547 ARMVectorReg zregs[32]; 548 549 #ifdef TARGET_AARCH64 550 /* Store FFR as pregs[16] to make it easier to treat as any other. */ 551 #define FFR_PRED_NUM 16 552 ARMPredicateReg pregs[17]; 553 /* Scratch space for aa64 sve predicate temporary. */ 554 ARMPredicateReg preg_tmp; 555 #endif 556 557 uint32_t xregs[16]; 558 /* We store these fpcsr fields separately for convenience. */ 559 int vec_len; 560 int vec_stride; 561 562 /* Scratch space for aa32 neon expansion. */ 563 uint32_t scratch[8]; 564 565 /* There are a number of distinct float control structures: 566 * 567 * fp_status: is the "normal" fp status. 568 * fp_status_fp16: used for half-precision calculations 569 * standard_fp_status : the ARM "Standard FPSCR Value" 570 * 571 * Half-precision operations are governed by a separate 572 * flush-to-zero control bit in FPSCR:FZ16. We pass a separate 573 * status structure to control this. 574 * 575 * The "Standard FPSCR", ie default-NaN, flush-to-zero, 576 * round-to-nearest and is used by any operations (generally 577 * Neon) which the architecture defines as controlled by the 578 * standard FPSCR value rather than the FPSCR. 579 * 580 * To avoid having to transfer exception bits around, we simply 581 * say that the FPSCR cumulative exception flags are the logical 582 * OR of the flags in the three fp statuses. This relies on the 583 * only thing which needs to read the exception flags being 584 * an explicit FPSCR read. 585 */ 586 float_status fp_status; 587 float_status fp_status_f16; 588 float_status standard_fp_status; 589 590 /* ZCR_EL[1-3] */ 591 uint64_t zcr_el[4]; 592 } vfp; 593 uint64_t exclusive_addr; 594 uint64_t exclusive_val; 595 uint64_t exclusive_high; 596 597 /* iwMMXt coprocessor state. */ 598 struct { 599 uint64_t regs[16]; 600 uint64_t val; 601 602 uint32_t cregs[16]; 603 } iwmmxt; 604 605 #if defined(CONFIG_USER_ONLY) 606 /* For usermode syscall translation. */ 607 int eabi; 608 #endif 609 610 struct CPUBreakpoint *cpu_breakpoint[16]; 611 struct CPUWatchpoint *cpu_watchpoint[16]; 612 613 /* Fields up to this point are cleared by a CPU reset */ 614 struct {} end_reset_fields; 615 616 CPU_COMMON 617 618 /* Fields after CPU_COMMON are preserved across CPU reset. */ 619 620 /* Internal CPU feature flags. */ 621 uint64_t features; 622 623 /* PMSAv7 MPU */ 624 struct { 625 uint32_t *drbar; 626 uint32_t *drsr; 627 uint32_t *dracr; 628 uint32_t rnr[M_REG_NUM_BANKS]; 629 } pmsav7; 630 631 /* PMSAv8 MPU */ 632 struct { 633 /* The PMSAv8 implementation also shares some PMSAv7 config 634 * and state: 635 * pmsav7.rnr (region number register) 636 * pmsav7_dregion (number of configured regions) 637 */ 638 uint32_t *rbar[M_REG_NUM_BANKS]; 639 uint32_t *rlar[M_REG_NUM_BANKS]; 640 uint32_t mair0[M_REG_NUM_BANKS]; 641 uint32_t mair1[M_REG_NUM_BANKS]; 642 } pmsav8; 643 644 /* v8M SAU */ 645 struct { 646 uint32_t *rbar; 647 uint32_t *rlar; 648 uint32_t rnr; 649 uint32_t ctrl; 650 } sau; 651 652 void *nvic; 653 const struct arm_boot_info *boot_info; 654 /* Store GICv3CPUState to access from this struct */ 655 void *gicv3state; 656 } CPUARMState; 657 658 /** 659 * ARMELChangeHookFn: 660 * type of a function which can be registered via arm_register_el_change_hook() 661 * to get callbacks when the CPU changes its exception level or mode. 662 */ 663 typedef void ARMELChangeHookFn(ARMCPU *cpu, void *opaque); 664 typedef struct ARMELChangeHook ARMELChangeHook; 665 struct ARMELChangeHook { 666 ARMELChangeHookFn *hook; 667 void *opaque; 668 QLIST_ENTRY(ARMELChangeHook) node; 669 }; 670 671 /* These values map onto the return values for 672 * QEMU_PSCI_0_2_FN_AFFINITY_INFO */ 673 typedef enum ARMPSCIState { 674 PSCI_ON = 0, 675 PSCI_OFF = 1, 676 PSCI_ON_PENDING = 2 677 } ARMPSCIState; 678 679 typedef struct ARMISARegisters ARMISARegisters; 680 681 /** 682 * ARMCPU: 683 * @env: #CPUARMState 684 * 685 * An ARM CPU core. 686 */ 687 struct ARMCPU { 688 /*< private >*/ 689 CPUState parent_obj; 690 /*< public >*/ 691 692 CPUARMState env; 693 694 /* Coprocessor information */ 695 GHashTable *cp_regs; 696 /* For marshalling (mostly coprocessor) register state between the 697 * kernel and QEMU (for KVM) and between two QEMUs (for migration), 698 * we use these arrays. 699 */ 700 /* List of register indexes managed via these arrays; (full KVM style 701 * 64 bit indexes, not CPRegInfo 32 bit indexes) 702 */ 703 uint64_t *cpreg_indexes; 704 /* Values of the registers (cpreg_indexes[i]'s value is cpreg_values[i]) */ 705 uint64_t *cpreg_values; 706 /* Length of the indexes, values, reset_values arrays */ 707 int32_t cpreg_array_len; 708 /* These are used only for migration: incoming data arrives in 709 * these fields and is sanity checked in post_load before copying 710 * to the working data structures above. 711 */ 712 uint64_t *cpreg_vmstate_indexes; 713 uint64_t *cpreg_vmstate_values; 714 int32_t cpreg_vmstate_array_len; 715 716 DynamicGDBXMLInfo dyn_xml; 717 718 /* Timers used by the generic (architected) timer */ 719 QEMUTimer *gt_timer[NUM_GTIMERS]; 720 /* GPIO outputs for generic timer */ 721 qemu_irq gt_timer_outputs[NUM_GTIMERS]; 722 /* GPIO output for GICv3 maintenance interrupt signal */ 723 qemu_irq gicv3_maintenance_interrupt; 724 /* GPIO output for the PMU interrupt */ 725 qemu_irq pmu_interrupt; 726 727 /* MemoryRegion to use for secure physical accesses */ 728 MemoryRegion *secure_memory; 729 730 /* For v8M, pointer to the IDAU interface provided by board/SoC */ 731 Object *idau; 732 733 /* 'compatible' string for this CPU for Linux device trees */ 734 const char *dtb_compatible; 735 736 /* PSCI version for this CPU 737 * Bits[31:16] = Major Version 738 * Bits[15:0] = Minor Version 739 */ 740 uint32_t psci_version; 741 742 /* Should CPU start in PSCI powered-off state? */ 743 bool start_powered_off; 744 745 /* Current power state, access guarded by BQL */ 746 ARMPSCIState power_state; 747 748 /* CPU has virtualization extension */ 749 bool has_el2; 750 /* CPU has security extension */ 751 bool has_el3; 752 /* CPU has PMU (Performance Monitor Unit) */ 753 bool has_pmu; 754 755 /* CPU has memory protection unit */ 756 bool has_mpu; 757 /* PMSAv7 MPU number of supported regions */ 758 uint32_t pmsav7_dregion; 759 /* v8M SAU number of supported regions */ 760 uint32_t sau_sregion; 761 762 /* PSCI conduit used to invoke PSCI methods 763 * 0 - disabled, 1 - smc, 2 - hvc 764 */ 765 uint32_t psci_conduit; 766 767 /* For v8M, initial value of the Secure VTOR */ 768 uint32_t init_svtor; 769 770 /* [QEMU_]KVM_ARM_TARGET_* constant for this CPU, or 771 * QEMU_KVM_ARM_TARGET_NONE if the kernel doesn't support this CPU type. 772 */ 773 uint32_t kvm_target; 774 775 /* KVM init features for this CPU */ 776 uint32_t kvm_init_features[7]; 777 778 /* Uniprocessor system with MP extensions */ 779 bool mp_is_up; 780 781 /* True if we tried kvm_arm_host_cpu_features() during CPU instance_init 782 * and the probe failed (so we need to report the error in realize) 783 */ 784 bool host_cpu_probe_failed; 785 786 /* Specify the number of cores in this CPU cluster. Used for the L2CTLR 787 * register. 788 */ 789 int32_t core_count; 790 791 /* The instance init functions for implementation-specific subclasses 792 * set these fields to specify the implementation-dependent values of 793 * various constant registers and reset values of non-constant 794 * registers. 795 * Some of these might become QOM properties eventually. 796 * Field names match the official register names as defined in the 797 * ARMv7AR ARM Architecture Reference Manual. A reset_ prefix 798 * is used for reset values of non-constant registers; no reset_ 799 * prefix means a constant register. 800 * Some of these registers are split out into a substructure that 801 * is shared with the translators to control the ISA. 802 */ 803 struct ARMISARegisters { 804 uint32_t id_isar0; 805 uint32_t id_isar1; 806 uint32_t id_isar2; 807 uint32_t id_isar3; 808 uint32_t id_isar4; 809 uint32_t id_isar5; 810 uint32_t id_isar6; 811 uint32_t mvfr0; 812 uint32_t mvfr1; 813 uint32_t mvfr2; 814 uint64_t id_aa64isar0; 815 uint64_t id_aa64isar1; 816 uint64_t id_aa64pfr0; 817 uint64_t id_aa64pfr1; 818 } isar; 819 uint32_t midr; 820 uint32_t revidr; 821 uint32_t reset_fpsid; 822 uint32_t ctr; 823 uint32_t reset_sctlr; 824 uint32_t id_pfr0; 825 uint32_t id_pfr1; 826 uint32_t id_dfr0; 827 uint32_t pmceid0; 828 uint32_t pmceid1; 829 uint32_t id_afr0; 830 uint32_t id_mmfr0; 831 uint32_t id_mmfr1; 832 uint32_t id_mmfr2; 833 uint32_t id_mmfr3; 834 uint32_t id_mmfr4; 835 uint64_t id_aa64dfr0; 836 uint64_t id_aa64dfr1; 837 uint64_t id_aa64afr0; 838 uint64_t id_aa64afr1; 839 uint64_t id_aa64mmfr0; 840 uint64_t id_aa64mmfr1; 841 uint32_t dbgdidr; 842 uint32_t clidr; 843 uint64_t mp_affinity; /* MP ID without feature bits */ 844 /* The elements of this array are the CCSIDR values for each cache, 845 * in the order L1DCache, L1ICache, L2DCache, L2ICache, etc. 846 */ 847 uint32_t ccsidr[16]; 848 uint64_t reset_cbar; 849 uint32_t reset_auxcr; 850 bool reset_hivecs; 851 /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ 852 uint32_t dcz_blocksize; 853 uint64_t rvbar; 854 855 /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ 856 int gic_num_lrs; /* number of list registers */ 857 int gic_vpribits; /* number of virtual priority bits */ 858 int gic_vprebits; /* number of virtual preemption bits */ 859 860 /* Whether the cfgend input is high (i.e. this CPU should reset into 861 * big-endian mode). This setting isn't used directly: instead it modifies 862 * the reset_sctlr value to have SCTLR_B or SCTLR_EE set, depending on the 863 * architecture version. 864 */ 865 bool cfgend; 866 867 QLIST_HEAD(, ARMELChangeHook) pre_el_change_hooks; 868 QLIST_HEAD(, ARMELChangeHook) el_change_hooks; 869 870 int32_t node_id; /* NUMA node this CPU belongs to */ 871 872 /* Used to synchronize KVM and QEMU in-kernel device levels */ 873 uint8_t device_irq_level; 874 875 /* Used to set the maximum vector length the cpu will support. */ 876 uint32_t sve_max_vq; 877 }; 878 879 static inline ARMCPU *arm_env_get_cpu(CPUARMState *env) 880 { 881 return container_of(env, ARMCPU, env); 882 } 883 884 uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz); 885 886 #define ENV_GET_CPU(e) CPU(arm_env_get_cpu(e)) 887 888 #define ENV_OFFSET offsetof(ARMCPU, env) 889 890 #ifndef CONFIG_USER_ONLY 891 extern const struct VMStateDescription vmstate_arm_cpu; 892 #endif 893 894 void arm_cpu_do_interrupt(CPUState *cpu); 895 void arm_v7m_cpu_do_interrupt(CPUState *cpu); 896 bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req); 897 898 void arm_cpu_dump_state(CPUState *cs, FILE *f, fprintf_function cpu_fprintf, 899 int flags); 900 901 hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr, 902 MemTxAttrs *attrs); 903 904 int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg); 905 int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); 906 907 /* Dynamically generates for gdb stub an XML description of the sysregs from 908 * the cp_regs hashtable. Returns the registered sysregs number. 909 */ 910 int arm_gen_dynamic_xml(CPUState *cpu); 911 912 /* Returns the dynamically generated XML for the gdb stub. 913 * Returns a pointer to the XML contents for the specified XML file or NULL 914 * if the XML name doesn't match the predefined one. 915 */ 916 const char *arm_gdb_get_dynamic_xml(CPUState *cpu, const char *xmlname); 917 918 int arm_cpu_write_elf64_note(WriteCoreDumpFunction f, CPUState *cs, 919 int cpuid, void *opaque); 920 int arm_cpu_write_elf32_note(WriteCoreDumpFunction f, CPUState *cs, 921 int cpuid, void *opaque); 922 923 #ifdef TARGET_AARCH64 924 int aarch64_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg); 925 int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); 926 void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq); 927 void aarch64_sve_change_el(CPUARMState *env, int old_el, 928 int new_el, bool el0_a64); 929 #else 930 static inline void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) { } 931 static inline void aarch64_sve_change_el(CPUARMState *env, int o, 932 int n, bool a) 933 { } 934 #endif 935 936 target_ulong do_arm_semihosting(CPUARMState *env); 937 void aarch64_sync_32_to_64(CPUARMState *env); 938 void aarch64_sync_64_to_32(CPUARMState *env); 939 940 int fp_exception_el(CPUARMState *env, int cur_el); 941 int sve_exception_el(CPUARMState *env, int cur_el); 942 uint32_t sve_zcr_len_for_el(CPUARMState *env, int el); 943 944 static inline bool is_a64(CPUARMState *env) 945 { 946 return env->aarch64; 947 } 948 949 /* you can call this signal handler from your SIGBUS and SIGSEGV 950 signal handlers to inform the virtual CPU of exceptions. non zero 951 is returned if the signal was handled by the virtual CPU. */ 952 int cpu_arm_signal_handler(int host_signum, void *pinfo, 953 void *puc); 954 955 /** 956 * pmccntr_sync 957 * @env: CPUARMState 958 * 959 * Synchronises the counter in the PMCCNTR. This must always be called twice, 960 * once before any action that might affect the timer and again afterwards. 961 * The function is used to swap the state of the register if required. 962 * This only happens when not in user mode (!CONFIG_USER_ONLY) 963 */ 964 void pmccntr_sync(CPUARMState *env); 965 966 /* SCTLR bit meanings. Several bits have been reused in newer 967 * versions of the architecture; in that case we define constants 968 * for both old and new bit meanings. Code which tests against those 969 * bits should probably check or otherwise arrange that the CPU 970 * is the architectural version it expects. 971 */ 972 #define SCTLR_M (1U << 0) 973 #define SCTLR_A (1U << 1) 974 #define SCTLR_C (1U << 2) 975 #define SCTLR_W (1U << 3) /* up to v6; RAO in v7 */ 976 #define SCTLR_SA (1U << 3) 977 #define SCTLR_P (1U << 4) /* up to v5; RAO in v6 and v7 */ 978 #define SCTLR_SA0 (1U << 4) /* v8 onward, AArch64 only */ 979 #define SCTLR_D (1U << 5) /* up to v5; RAO in v6 */ 980 #define SCTLR_CP15BEN (1U << 5) /* v7 onward */ 981 #define SCTLR_L (1U << 6) /* up to v5; RAO in v6 and v7; RAZ in v8 */ 982 #define SCTLR_B (1U << 7) /* up to v6; RAZ in v7 */ 983 #define SCTLR_ITD (1U << 7) /* v8 onward */ 984 #define SCTLR_S (1U << 8) /* up to v6; RAZ in v7 */ 985 #define SCTLR_SED (1U << 8) /* v8 onward */ 986 #define SCTLR_R (1U << 9) /* up to v6; RAZ in v7 */ 987 #define SCTLR_UMA (1U << 9) /* v8 onward, AArch64 only */ 988 #define SCTLR_F (1U << 10) /* up to v6 */ 989 #define SCTLR_SW (1U << 10) /* v7 onward */ 990 #define SCTLR_Z (1U << 11) 991 #define SCTLR_I (1U << 12) 992 #define SCTLR_V (1U << 13) 993 #define SCTLR_RR (1U << 14) /* up to v7 */ 994 #define SCTLR_DZE (1U << 14) /* v8 onward, AArch64 only */ 995 #define SCTLR_L4 (1U << 15) /* up to v6; RAZ in v7 */ 996 #define SCTLR_UCT (1U << 15) /* v8 onward, AArch64 only */ 997 #define SCTLR_DT (1U << 16) /* up to ??, RAO in v6 and v7 */ 998 #define SCTLR_nTWI (1U << 16) /* v8 onward */ 999 #define SCTLR_HA (1U << 17) 1000 #define SCTLR_BR (1U << 17) /* PMSA only */ 1001 #define SCTLR_IT (1U << 18) /* up to ??, RAO in v6 and v7 */ 1002 #define SCTLR_nTWE (1U << 18) /* v8 onward */ 1003 #define SCTLR_WXN (1U << 19) 1004 #define SCTLR_ST (1U << 20) /* up to ??, RAZ in v6 */ 1005 #define SCTLR_UWXN (1U << 20) /* v7 onward */ 1006 #define SCTLR_FI (1U << 21) 1007 #define SCTLR_U (1U << 22) 1008 #define SCTLR_XP (1U << 23) /* up to v6; v7 onward RAO */ 1009 #define SCTLR_VE (1U << 24) /* up to v7 */ 1010 #define SCTLR_E0E (1U << 24) /* v8 onward, AArch64 only */ 1011 #define SCTLR_EE (1U << 25) 1012 #define SCTLR_L2 (1U << 26) /* up to v6, RAZ in v7 */ 1013 #define SCTLR_UCI (1U << 26) /* v8 onward, AArch64 only */ 1014 #define SCTLR_NMFI (1U << 27) 1015 #define SCTLR_TRE (1U << 28) 1016 #define SCTLR_AFE (1U << 29) 1017 #define SCTLR_TE (1U << 30) 1018 1019 #define CPTR_TCPAC (1U << 31) 1020 #define CPTR_TTA (1U << 20) 1021 #define CPTR_TFP (1U << 10) 1022 #define CPTR_TZ (1U << 8) /* CPTR_EL2 */ 1023 #define CPTR_EZ (1U << 8) /* CPTR_EL3 */ 1024 1025 #define MDCR_EPMAD (1U << 21) 1026 #define MDCR_EDAD (1U << 20) 1027 #define MDCR_SPME (1U << 17) 1028 #define MDCR_SDD (1U << 16) 1029 #define MDCR_SPD (3U << 14) 1030 #define MDCR_TDRA (1U << 11) 1031 #define MDCR_TDOSA (1U << 10) 1032 #define MDCR_TDA (1U << 9) 1033 #define MDCR_TDE (1U << 8) 1034 #define MDCR_HPME (1U << 7) 1035 #define MDCR_TPM (1U << 6) 1036 #define MDCR_TPMCR (1U << 5) 1037 1038 /* Not all of the MDCR_EL3 bits are present in the 32-bit SDCR */ 1039 #define SDCR_VALID_MASK (MDCR_EPMAD | MDCR_EDAD | MDCR_SPME | MDCR_SPD) 1040 1041 #define CPSR_M (0x1fU) 1042 #define CPSR_T (1U << 5) 1043 #define CPSR_F (1U << 6) 1044 #define CPSR_I (1U << 7) 1045 #define CPSR_A (1U << 8) 1046 #define CPSR_E (1U << 9) 1047 #define CPSR_IT_2_7 (0xfc00U) 1048 #define CPSR_GE (0xfU << 16) 1049 #define CPSR_IL (1U << 20) 1050 /* Note that the RESERVED bits include bit 21, which is PSTATE_SS in 1051 * an AArch64 SPSR but RES0 in AArch32 SPSR and CPSR. In QEMU we use 1052 * env->uncached_cpsr bit 21 to store PSTATE.SS when executing in AArch32, 1053 * where it is live state but not accessible to the AArch32 code. 1054 */ 1055 #define CPSR_RESERVED (0x7U << 21) 1056 #define CPSR_J (1U << 24) 1057 #define CPSR_IT_0_1 (3U << 25) 1058 #define CPSR_Q (1U << 27) 1059 #define CPSR_V (1U << 28) 1060 #define CPSR_C (1U << 29) 1061 #define CPSR_Z (1U << 30) 1062 #define CPSR_N (1U << 31) 1063 #define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V) 1064 #define CPSR_AIF (CPSR_A | CPSR_I | CPSR_F) 1065 1066 #define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7) 1067 #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ 1068 | CPSR_NZCV) 1069 /* Bits writable in user mode. */ 1070 #define CPSR_USER (CPSR_NZCV | CPSR_Q | CPSR_GE) 1071 /* Execution state bits. MRS read as zero, MSR writes ignored. */ 1072 #define CPSR_EXEC (CPSR_T | CPSR_IT | CPSR_J | CPSR_IL) 1073 /* Mask of bits which may be set by exception return copying them from SPSR */ 1074 #define CPSR_ERET_MASK (~CPSR_RESERVED) 1075 1076 /* Bit definitions for M profile XPSR. Most are the same as CPSR. */ 1077 #define XPSR_EXCP 0x1ffU 1078 #define XPSR_SPREALIGN (1U << 9) /* Only set in exception stack frames */ 1079 #define XPSR_IT_2_7 CPSR_IT_2_7 1080 #define XPSR_GE CPSR_GE 1081 #define XPSR_SFPA (1U << 20) /* Only set in exception stack frames */ 1082 #define XPSR_T (1U << 24) /* Not the same as CPSR_T ! */ 1083 #define XPSR_IT_0_1 CPSR_IT_0_1 1084 #define XPSR_Q CPSR_Q 1085 #define XPSR_V CPSR_V 1086 #define XPSR_C CPSR_C 1087 #define XPSR_Z CPSR_Z 1088 #define XPSR_N CPSR_N 1089 #define XPSR_NZCV CPSR_NZCV 1090 #define XPSR_IT CPSR_IT 1091 1092 #define TTBCR_N (7U << 0) /* TTBCR.EAE==0 */ 1093 #define TTBCR_T0SZ (7U << 0) /* TTBCR.EAE==1 */ 1094 #define TTBCR_PD0 (1U << 4) 1095 #define TTBCR_PD1 (1U << 5) 1096 #define TTBCR_EPD0 (1U << 7) 1097 #define TTBCR_IRGN0 (3U << 8) 1098 #define TTBCR_ORGN0 (3U << 10) 1099 #define TTBCR_SH0 (3U << 12) 1100 #define TTBCR_T1SZ (3U << 16) 1101 #define TTBCR_A1 (1U << 22) 1102 #define TTBCR_EPD1 (1U << 23) 1103 #define TTBCR_IRGN1 (3U << 24) 1104 #define TTBCR_ORGN1 (3U << 26) 1105 #define TTBCR_SH1 (1U << 28) 1106 #define TTBCR_EAE (1U << 31) 1107 1108 /* Bit definitions for ARMv8 SPSR (PSTATE) format. 1109 * Only these are valid when in AArch64 mode; in 1110 * AArch32 mode SPSRs are basically CPSR-format. 1111 */ 1112 #define PSTATE_SP (1U) 1113 #define PSTATE_M (0xFU) 1114 #define PSTATE_nRW (1U << 4) 1115 #define PSTATE_F (1U << 6) 1116 #define PSTATE_I (1U << 7) 1117 #define PSTATE_A (1U << 8) 1118 #define PSTATE_D (1U << 9) 1119 #define PSTATE_IL (1U << 20) 1120 #define PSTATE_SS (1U << 21) 1121 #define PSTATE_V (1U << 28) 1122 #define PSTATE_C (1U << 29) 1123 #define PSTATE_Z (1U << 30) 1124 #define PSTATE_N (1U << 31) 1125 #define PSTATE_NZCV (PSTATE_N | PSTATE_Z | PSTATE_C | PSTATE_V) 1126 #define PSTATE_DAIF (PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F) 1127 #define CACHED_PSTATE_BITS (PSTATE_NZCV | PSTATE_DAIF) 1128 /* Mode values for AArch64 */ 1129 #define PSTATE_MODE_EL3h 13 1130 #define PSTATE_MODE_EL3t 12 1131 #define PSTATE_MODE_EL2h 9 1132 #define PSTATE_MODE_EL2t 8 1133 #define PSTATE_MODE_EL1h 5 1134 #define PSTATE_MODE_EL1t 4 1135 #define PSTATE_MODE_EL0t 0 1136 1137 /* Write a new value to v7m.exception, thus transitioning into or out 1138 * of Handler mode; this may result in a change of active stack pointer. 1139 */ 1140 void write_v7m_exception(CPUARMState *env, uint32_t new_exc); 1141 1142 /* Map EL and handler into a PSTATE_MODE. */ 1143 static inline unsigned int aarch64_pstate_mode(unsigned int el, bool handler) 1144 { 1145 return (el << 2) | handler; 1146 } 1147 1148 /* Return the current PSTATE value. For the moment we don't support 32<->64 bit 1149 * interprocessing, so we don't attempt to sync with the cpsr state used by 1150 * the 32 bit decoder. 1151 */ 1152 static inline uint32_t pstate_read(CPUARMState *env) 1153 { 1154 int ZF; 1155 1156 ZF = (env->ZF == 0); 1157 return (env->NF & 0x80000000) | (ZF << 30) 1158 | (env->CF << 29) | ((env->VF & 0x80000000) >> 3) 1159 | env->pstate | env->daif; 1160 } 1161 1162 static inline void pstate_write(CPUARMState *env, uint32_t val) 1163 { 1164 env->ZF = (~val) & PSTATE_Z; 1165 env->NF = val; 1166 env->CF = (val >> 29) & 1; 1167 env->VF = (val << 3) & 0x80000000; 1168 env->daif = val & PSTATE_DAIF; 1169 env->pstate = val & ~CACHED_PSTATE_BITS; 1170 } 1171 1172 /* Return the current CPSR value. */ 1173 uint32_t cpsr_read(CPUARMState *env); 1174 1175 typedef enum CPSRWriteType { 1176 CPSRWriteByInstr = 0, /* from guest MSR or CPS */ 1177 CPSRWriteExceptionReturn = 1, /* from guest exception return insn */ 1178 CPSRWriteRaw = 2, /* trust values, do not switch reg banks */ 1179 CPSRWriteByGDBStub = 3, /* from the GDB stub */ 1180 } CPSRWriteType; 1181 1182 /* Set the CPSR. Note that some bits of mask must be all-set or all-clear.*/ 1183 void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, 1184 CPSRWriteType write_type); 1185 1186 /* Return the current xPSR value. */ 1187 static inline uint32_t xpsr_read(CPUARMState *env) 1188 { 1189 int ZF; 1190 ZF = (env->ZF == 0); 1191 return (env->NF & 0x80000000) | (ZF << 30) 1192 | (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27) 1193 | (env->thumb << 24) | ((env->condexec_bits & 3) << 25) 1194 | ((env->condexec_bits & 0xfc) << 8) 1195 | env->v7m.exception; 1196 } 1197 1198 /* Set the xPSR. Note that some bits of mask must be all-set or all-clear. */ 1199 static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask) 1200 { 1201 if (mask & XPSR_NZCV) { 1202 env->ZF = (~val) & XPSR_Z; 1203 env->NF = val; 1204 env->CF = (val >> 29) & 1; 1205 env->VF = (val << 3) & 0x80000000; 1206 } 1207 if (mask & XPSR_Q) { 1208 env->QF = ((val & XPSR_Q) != 0); 1209 } 1210 if (mask & XPSR_T) { 1211 env->thumb = ((val & XPSR_T) != 0); 1212 } 1213 if (mask & XPSR_IT_0_1) { 1214 env->condexec_bits &= ~3; 1215 env->condexec_bits |= (val >> 25) & 3; 1216 } 1217 if (mask & XPSR_IT_2_7) { 1218 env->condexec_bits &= 3; 1219 env->condexec_bits |= (val >> 8) & 0xfc; 1220 } 1221 if (mask & XPSR_EXCP) { 1222 /* Note that this only happens on exception exit */ 1223 write_v7m_exception(env, val & XPSR_EXCP); 1224 } 1225 } 1226 1227 #define HCR_VM (1ULL << 0) 1228 #define HCR_SWIO (1ULL << 1) 1229 #define HCR_PTW (1ULL << 2) 1230 #define HCR_FMO (1ULL << 3) 1231 #define HCR_IMO (1ULL << 4) 1232 #define HCR_AMO (1ULL << 5) 1233 #define HCR_VF (1ULL << 6) 1234 #define HCR_VI (1ULL << 7) 1235 #define HCR_VSE (1ULL << 8) 1236 #define HCR_FB (1ULL << 9) 1237 #define HCR_BSU_MASK (3ULL << 10) 1238 #define HCR_DC (1ULL << 12) 1239 #define HCR_TWI (1ULL << 13) 1240 #define HCR_TWE (1ULL << 14) 1241 #define HCR_TID0 (1ULL << 15) 1242 #define HCR_TID1 (1ULL << 16) 1243 #define HCR_TID2 (1ULL << 17) 1244 #define HCR_TID3 (1ULL << 18) 1245 #define HCR_TSC (1ULL << 19) 1246 #define HCR_TIDCP (1ULL << 20) 1247 #define HCR_TACR (1ULL << 21) 1248 #define HCR_TSW (1ULL << 22) 1249 #define HCR_TPC (1ULL << 23) 1250 #define HCR_TPU (1ULL << 24) 1251 #define HCR_TTLB (1ULL << 25) 1252 #define HCR_TVM (1ULL << 26) 1253 #define HCR_TGE (1ULL << 27) 1254 #define HCR_TDZ (1ULL << 28) 1255 #define HCR_HCD (1ULL << 29) 1256 #define HCR_TRVM (1ULL << 30) 1257 #define HCR_RW (1ULL << 31) 1258 #define HCR_CD (1ULL << 32) 1259 #define HCR_ID (1ULL << 33) 1260 #define HCR_E2H (1ULL << 34) 1261 /* 1262 * When we actually implement ARMv8.1-VHE we should add HCR_E2H to 1263 * HCR_MASK and then clear it again if the feature bit is not set in 1264 * hcr_write(). 1265 */ 1266 #define HCR_MASK ((1ULL << 34) - 1) 1267 1268 #define SCR_NS (1U << 0) 1269 #define SCR_IRQ (1U << 1) 1270 #define SCR_FIQ (1U << 2) 1271 #define SCR_EA (1U << 3) 1272 #define SCR_FW (1U << 4) 1273 #define SCR_AW (1U << 5) 1274 #define SCR_NET (1U << 6) 1275 #define SCR_SMD (1U << 7) 1276 #define SCR_HCE (1U << 8) 1277 #define SCR_SIF (1U << 9) 1278 #define SCR_RW (1U << 10) 1279 #define SCR_ST (1U << 11) 1280 #define SCR_TWI (1U << 12) 1281 #define SCR_TWE (1U << 13) 1282 #define SCR_AARCH32_MASK (0x3fff & ~(SCR_RW | SCR_ST)) 1283 #define SCR_AARCH64_MASK (0x3fff & ~SCR_NET) 1284 1285 /* Return the current FPSCR value. */ 1286 uint32_t vfp_get_fpscr(CPUARMState *env); 1287 void vfp_set_fpscr(CPUARMState *env, uint32_t val); 1288 1289 /* FPCR, Floating Point Control Register 1290 * FPSR, Floating Poiht Status Register 1291 * 1292 * For A64 the FPSCR is split into two logically distinct registers, 1293 * FPCR and FPSR. However since they still use non-overlapping bits 1294 * we store the underlying state in fpscr and just mask on read/write. 1295 */ 1296 #define FPSR_MASK 0xf800009f 1297 #define FPCR_MASK 0x07ff9f00 1298 1299 #define FPCR_FZ16 (1 << 19) /* ARMv8.2+, FP16 flush-to-zero */ 1300 #define FPCR_FZ (1 << 24) /* Flush-to-zero enable bit */ 1301 #define FPCR_DN (1 << 25) /* Default NaN enable bit */ 1302 1303 static inline uint32_t vfp_get_fpsr(CPUARMState *env) 1304 { 1305 return vfp_get_fpscr(env) & FPSR_MASK; 1306 } 1307 1308 static inline void vfp_set_fpsr(CPUARMState *env, uint32_t val) 1309 { 1310 uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPSR_MASK) | (val & FPSR_MASK); 1311 vfp_set_fpscr(env, new_fpscr); 1312 } 1313 1314 static inline uint32_t vfp_get_fpcr(CPUARMState *env) 1315 { 1316 return vfp_get_fpscr(env) & FPCR_MASK; 1317 } 1318 1319 static inline void vfp_set_fpcr(CPUARMState *env, uint32_t val) 1320 { 1321 uint32_t new_fpscr = (vfp_get_fpscr(env) & ~FPCR_MASK) | (val & FPCR_MASK); 1322 vfp_set_fpscr(env, new_fpscr); 1323 } 1324 1325 enum arm_cpu_mode { 1326 ARM_CPU_MODE_USR = 0x10, 1327 ARM_CPU_MODE_FIQ = 0x11, 1328 ARM_CPU_MODE_IRQ = 0x12, 1329 ARM_CPU_MODE_SVC = 0x13, 1330 ARM_CPU_MODE_MON = 0x16, 1331 ARM_CPU_MODE_ABT = 0x17, 1332 ARM_CPU_MODE_HYP = 0x1a, 1333 ARM_CPU_MODE_UND = 0x1b, 1334 ARM_CPU_MODE_SYS = 0x1f 1335 }; 1336 1337 /* VFP system registers. */ 1338 #define ARM_VFP_FPSID 0 1339 #define ARM_VFP_FPSCR 1 1340 #define ARM_VFP_MVFR2 5 1341 #define ARM_VFP_MVFR1 6 1342 #define ARM_VFP_MVFR0 7 1343 #define ARM_VFP_FPEXC 8 1344 #define ARM_VFP_FPINST 9 1345 #define ARM_VFP_FPINST2 10 1346 1347 /* iwMMXt coprocessor control registers. */ 1348 #define ARM_IWMMXT_wCID 0 1349 #define ARM_IWMMXT_wCon 1 1350 #define ARM_IWMMXT_wCSSF 2 1351 #define ARM_IWMMXT_wCASF 3 1352 #define ARM_IWMMXT_wCGR0 8 1353 #define ARM_IWMMXT_wCGR1 9 1354 #define ARM_IWMMXT_wCGR2 10 1355 #define ARM_IWMMXT_wCGR3 11 1356 1357 /* V7M CCR bits */ 1358 FIELD(V7M_CCR, NONBASETHRDENA, 0, 1) 1359 FIELD(V7M_CCR, USERSETMPEND, 1, 1) 1360 FIELD(V7M_CCR, UNALIGN_TRP, 3, 1) 1361 FIELD(V7M_CCR, DIV_0_TRP, 4, 1) 1362 FIELD(V7M_CCR, BFHFNMIGN, 8, 1) 1363 FIELD(V7M_CCR, STKALIGN, 9, 1) 1364 FIELD(V7M_CCR, STKOFHFNMIGN, 10, 1) 1365 FIELD(V7M_CCR, DC, 16, 1) 1366 FIELD(V7M_CCR, IC, 17, 1) 1367 FIELD(V7M_CCR, BP, 18, 1) 1368 1369 /* V7M SCR bits */ 1370 FIELD(V7M_SCR, SLEEPONEXIT, 1, 1) 1371 FIELD(V7M_SCR, SLEEPDEEP, 2, 1) 1372 FIELD(V7M_SCR, SLEEPDEEPS, 3, 1) 1373 FIELD(V7M_SCR, SEVONPEND, 4, 1) 1374 1375 /* V7M AIRCR bits */ 1376 FIELD(V7M_AIRCR, VECTRESET, 0, 1) 1377 FIELD(V7M_AIRCR, VECTCLRACTIVE, 1, 1) 1378 FIELD(V7M_AIRCR, SYSRESETREQ, 2, 1) 1379 FIELD(V7M_AIRCR, SYSRESETREQS, 3, 1) 1380 FIELD(V7M_AIRCR, PRIGROUP, 8, 3) 1381 FIELD(V7M_AIRCR, BFHFNMINS, 13, 1) 1382 FIELD(V7M_AIRCR, PRIS, 14, 1) 1383 FIELD(V7M_AIRCR, ENDIANNESS, 15, 1) 1384 FIELD(V7M_AIRCR, VECTKEY, 16, 16) 1385 1386 /* V7M CFSR bits for MMFSR */ 1387 FIELD(V7M_CFSR, IACCVIOL, 0, 1) 1388 FIELD(V7M_CFSR, DACCVIOL, 1, 1) 1389 FIELD(V7M_CFSR, MUNSTKERR, 3, 1) 1390 FIELD(V7M_CFSR, MSTKERR, 4, 1) 1391 FIELD(V7M_CFSR, MLSPERR, 5, 1) 1392 FIELD(V7M_CFSR, MMARVALID, 7, 1) 1393 1394 /* V7M CFSR bits for BFSR */ 1395 FIELD(V7M_CFSR, IBUSERR, 8 + 0, 1) 1396 FIELD(V7M_CFSR, PRECISERR, 8 + 1, 1) 1397 FIELD(V7M_CFSR, IMPRECISERR, 8 + 2, 1) 1398 FIELD(V7M_CFSR, UNSTKERR, 8 + 3, 1) 1399 FIELD(V7M_CFSR, STKERR, 8 + 4, 1) 1400 FIELD(V7M_CFSR, LSPERR, 8 + 5, 1) 1401 FIELD(V7M_CFSR, BFARVALID, 8 + 7, 1) 1402 1403 /* V7M CFSR bits for UFSR */ 1404 FIELD(V7M_CFSR, UNDEFINSTR, 16 + 0, 1) 1405 FIELD(V7M_CFSR, INVSTATE, 16 + 1, 1) 1406 FIELD(V7M_CFSR, INVPC, 16 + 2, 1) 1407 FIELD(V7M_CFSR, NOCP, 16 + 3, 1) 1408 FIELD(V7M_CFSR, STKOF, 16 + 4, 1) 1409 FIELD(V7M_CFSR, UNALIGNED, 16 + 8, 1) 1410 FIELD(V7M_CFSR, DIVBYZERO, 16 + 9, 1) 1411 1412 /* V7M CFSR bit masks covering all of the subregister bits */ 1413 FIELD(V7M_CFSR, MMFSR, 0, 8) 1414 FIELD(V7M_CFSR, BFSR, 8, 8) 1415 FIELD(V7M_CFSR, UFSR, 16, 16) 1416 1417 /* V7M HFSR bits */ 1418 FIELD(V7M_HFSR, VECTTBL, 1, 1) 1419 FIELD(V7M_HFSR, FORCED, 30, 1) 1420 FIELD(V7M_HFSR, DEBUGEVT, 31, 1) 1421 1422 /* V7M DFSR bits */ 1423 FIELD(V7M_DFSR, HALTED, 0, 1) 1424 FIELD(V7M_DFSR, BKPT, 1, 1) 1425 FIELD(V7M_DFSR, DWTTRAP, 2, 1) 1426 FIELD(V7M_DFSR, VCATCH, 3, 1) 1427 FIELD(V7M_DFSR, EXTERNAL, 4, 1) 1428 1429 /* V7M SFSR bits */ 1430 FIELD(V7M_SFSR, INVEP, 0, 1) 1431 FIELD(V7M_SFSR, INVIS, 1, 1) 1432 FIELD(V7M_SFSR, INVER, 2, 1) 1433 FIELD(V7M_SFSR, AUVIOL, 3, 1) 1434 FIELD(V7M_SFSR, INVTRAN, 4, 1) 1435 FIELD(V7M_SFSR, LSPERR, 5, 1) 1436 FIELD(V7M_SFSR, SFARVALID, 6, 1) 1437 FIELD(V7M_SFSR, LSERR, 7, 1) 1438 1439 /* v7M MPU_CTRL bits */ 1440 FIELD(V7M_MPU_CTRL, ENABLE, 0, 1) 1441 FIELD(V7M_MPU_CTRL, HFNMIENA, 1, 1) 1442 FIELD(V7M_MPU_CTRL, PRIVDEFENA, 2, 1) 1443 1444 /* v7M CLIDR bits */ 1445 FIELD(V7M_CLIDR, CTYPE_ALL, 0, 21) 1446 FIELD(V7M_CLIDR, LOUIS, 21, 3) 1447 FIELD(V7M_CLIDR, LOC, 24, 3) 1448 FIELD(V7M_CLIDR, LOUU, 27, 3) 1449 FIELD(V7M_CLIDR, ICB, 30, 2) 1450 1451 FIELD(V7M_CSSELR, IND, 0, 1) 1452 FIELD(V7M_CSSELR, LEVEL, 1, 3) 1453 /* We use the combination of InD and Level to index into cpu->ccsidr[]; 1454 * define a mask for this and check that it doesn't permit running off 1455 * the end of the array. 1456 */ 1457 FIELD(V7M_CSSELR, INDEX, 0, 4) 1458 1459 /* 1460 * System register ID fields. 1461 */ 1462 FIELD(ID_ISAR0, SWAP, 0, 4) 1463 FIELD(ID_ISAR0, BITCOUNT, 4, 4) 1464 FIELD(ID_ISAR0, BITFIELD, 8, 4) 1465 FIELD(ID_ISAR0, CMPBRANCH, 12, 4) 1466 FIELD(ID_ISAR0, COPROC, 16, 4) 1467 FIELD(ID_ISAR0, DEBUG, 20, 4) 1468 FIELD(ID_ISAR0, DIVIDE, 24, 4) 1469 1470 FIELD(ID_ISAR1, ENDIAN, 0, 4) 1471 FIELD(ID_ISAR1, EXCEPT, 4, 4) 1472 FIELD(ID_ISAR1, EXCEPT_AR, 8, 4) 1473 FIELD(ID_ISAR1, EXTEND, 12, 4) 1474 FIELD(ID_ISAR1, IFTHEN, 16, 4) 1475 FIELD(ID_ISAR1, IMMEDIATE, 20, 4) 1476 FIELD(ID_ISAR1, INTERWORK, 24, 4) 1477 FIELD(ID_ISAR1, JAZELLE, 28, 4) 1478 1479 FIELD(ID_ISAR2, LOADSTORE, 0, 4) 1480 FIELD(ID_ISAR2, MEMHINT, 4, 4) 1481 FIELD(ID_ISAR2, MULTIACCESSINT, 8, 4) 1482 FIELD(ID_ISAR2, MULT, 12, 4) 1483 FIELD(ID_ISAR2, MULTS, 16, 4) 1484 FIELD(ID_ISAR2, MULTU, 20, 4) 1485 FIELD(ID_ISAR2, PSR_AR, 24, 4) 1486 FIELD(ID_ISAR2, REVERSAL, 28, 4) 1487 1488 FIELD(ID_ISAR3, SATURATE, 0, 4) 1489 FIELD(ID_ISAR3, SIMD, 4, 4) 1490 FIELD(ID_ISAR3, SVC, 8, 4) 1491 FIELD(ID_ISAR3, SYNCHPRIM, 12, 4) 1492 FIELD(ID_ISAR3, TABBRANCH, 16, 4) 1493 FIELD(ID_ISAR3, T32COPY, 20, 4) 1494 FIELD(ID_ISAR3, TRUENOP, 24, 4) 1495 FIELD(ID_ISAR3, T32EE, 28, 4) 1496 1497 FIELD(ID_ISAR4, UNPRIV, 0, 4) 1498 FIELD(ID_ISAR4, WITHSHIFTS, 4, 4) 1499 FIELD(ID_ISAR4, WRITEBACK, 8, 4) 1500 FIELD(ID_ISAR4, SMC, 12, 4) 1501 FIELD(ID_ISAR4, BARRIER, 16, 4) 1502 FIELD(ID_ISAR4, SYNCHPRIM_FRAC, 20, 4) 1503 FIELD(ID_ISAR4, PSR_M, 24, 4) 1504 FIELD(ID_ISAR4, SWP_FRAC, 28, 4) 1505 1506 FIELD(ID_ISAR5, SEVL, 0, 4) 1507 FIELD(ID_ISAR5, AES, 4, 4) 1508 FIELD(ID_ISAR5, SHA1, 8, 4) 1509 FIELD(ID_ISAR5, SHA2, 12, 4) 1510 FIELD(ID_ISAR5, CRC32, 16, 4) 1511 FIELD(ID_ISAR5, RDM, 24, 4) 1512 FIELD(ID_ISAR5, VCMA, 28, 4) 1513 1514 FIELD(ID_ISAR6, JSCVT, 0, 4) 1515 FIELD(ID_ISAR6, DP, 4, 4) 1516 FIELD(ID_ISAR6, FHM, 8, 4) 1517 FIELD(ID_ISAR6, SB, 12, 4) 1518 FIELD(ID_ISAR6, SPECRES, 16, 4) 1519 1520 FIELD(ID_AA64ISAR0, AES, 4, 4) 1521 FIELD(ID_AA64ISAR0, SHA1, 8, 4) 1522 FIELD(ID_AA64ISAR0, SHA2, 12, 4) 1523 FIELD(ID_AA64ISAR0, CRC32, 16, 4) 1524 FIELD(ID_AA64ISAR0, ATOMIC, 20, 4) 1525 FIELD(ID_AA64ISAR0, RDM, 28, 4) 1526 FIELD(ID_AA64ISAR0, SHA3, 32, 4) 1527 FIELD(ID_AA64ISAR0, SM3, 36, 4) 1528 FIELD(ID_AA64ISAR0, SM4, 40, 4) 1529 FIELD(ID_AA64ISAR0, DP, 44, 4) 1530 FIELD(ID_AA64ISAR0, FHM, 48, 4) 1531 FIELD(ID_AA64ISAR0, TS, 52, 4) 1532 FIELD(ID_AA64ISAR0, TLB, 56, 4) 1533 FIELD(ID_AA64ISAR0, RNDR, 60, 4) 1534 1535 FIELD(ID_AA64ISAR1, DPB, 0, 4) 1536 FIELD(ID_AA64ISAR1, APA, 4, 4) 1537 FIELD(ID_AA64ISAR1, API, 8, 4) 1538 FIELD(ID_AA64ISAR1, JSCVT, 12, 4) 1539 FIELD(ID_AA64ISAR1, FCMA, 16, 4) 1540 FIELD(ID_AA64ISAR1, LRCPC, 20, 4) 1541 FIELD(ID_AA64ISAR1, GPA, 24, 4) 1542 FIELD(ID_AA64ISAR1, GPI, 28, 4) 1543 FIELD(ID_AA64ISAR1, FRINTTS, 32, 4) 1544 FIELD(ID_AA64ISAR1, SB, 36, 4) 1545 FIELD(ID_AA64ISAR1, SPECRES, 40, 4) 1546 1547 FIELD(ID_AA64PFR0, EL0, 0, 4) 1548 FIELD(ID_AA64PFR0, EL1, 4, 4) 1549 FIELD(ID_AA64PFR0, EL2, 8, 4) 1550 FIELD(ID_AA64PFR0, EL3, 12, 4) 1551 FIELD(ID_AA64PFR0, FP, 16, 4) 1552 FIELD(ID_AA64PFR0, ADVSIMD, 20, 4) 1553 FIELD(ID_AA64PFR0, GIC, 24, 4) 1554 FIELD(ID_AA64PFR0, RAS, 28, 4) 1555 FIELD(ID_AA64PFR0, SVE, 32, 4) 1556 1557 QEMU_BUILD_BUG_ON(ARRAY_SIZE(((ARMCPU *)0)->ccsidr) <= R_V7M_CSSELR_INDEX_MASK); 1558 1559 /* If adding a feature bit which corresponds to a Linux ELF 1560 * HWCAP bit, remember to update the feature-bit-to-hwcap 1561 * mapping in linux-user/elfload.c:get_elf_hwcap(). 1562 */ 1563 enum arm_features { 1564 ARM_FEATURE_VFP, 1565 ARM_FEATURE_AUXCR, /* ARM1026 Auxiliary control register. */ 1566 ARM_FEATURE_XSCALE, /* Intel XScale extensions. */ 1567 ARM_FEATURE_IWMMXT, /* Intel iwMMXt extension. */ 1568 ARM_FEATURE_V6, 1569 ARM_FEATURE_V6K, 1570 ARM_FEATURE_V7, 1571 ARM_FEATURE_THUMB2, 1572 ARM_FEATURE_PMSA, /* no MMU; may have Memory Protection Unit */ 1573 ARM_FEATURE_VFP3, 1574 ARM_FEATURE_VFP_FP16, 1575 ARM_FEATURE_NEON, 1576 ARM_FEATURE_M, /* Microcontroller profile. */ 1577 ARM_FEATURE_OMAPCP, /* OMAP specific CP15 ops handling. */ 1578 ARM_FEATURE_THUMB2EE, 1579 ARM_FEATURE_V7MP, /* v7 Multiprocessing Extensions */ 1580 ARM_FEATURE_V7VE, /* v7 Virtualization Extensions (non-EL2 parts) */ 1581 ARM_FEATURE_V4T, 1582 ARM_FEATURE_V5, 1583 ARM_FEATURE_STRONGARM, 1584 ARM_FEATURE_VAPA, /* cp15 VA to PA lookups */ 1585 ARM_FEATURE_VFP4, /* VFPv4 (implies that NEON is v2) */ 1586 ARM_FEATURE_GENERIC_TIMER, 1587 ARM_FEATURE_MVFR, /* Media and VFP Feature Registers 0 and 1 */ 1588 ARM_FEATURE_DUMMY_C15_REGS, /* RAZ/WI all of cp15 crn=15 */ 1589 ARM_FEATURE_CACHE_TEST_CLEAN, /* 926/1026 style test-and-clean ops */ 1590 ARM_FEATURE_CACHE_DIRTY_REG, /* 1136/1176 cache dirty status register */ 1591 ARM_FEATURE_CACHE_BLOCK_OPS, /* v6 optional cache block operations */ 1592 ARM_FEATURE_MPIDR, /* has cp15 MPIDR */ 1593 ARM_FEATURE_PXN, /* has Privileged Execute Never bit */ 1594 ARM_FEATURE_LPAE, /* has Large Physical Address Extension */ 1595 ARM_FEATURE_V8, 1596 ARM_FEATURE_AARCH64, /* supports 64 bit mode */ 1597 ARM_FEATURE_CBAR, /* has cp15 CBAR */ 1598 ARM_FEATURE_CRC, /* ARMv8 CRC instructions */ 1599 ARM_FEATURE_CBAR_RO, /* has cp15 CBAR and it is read-only */ 1600 ARM_FEATURE_EL2, /* has EL2 Virtualization support */ 1601 ARM_FEATURE_EL3, /* has EL3 Secure monitor support */ 1602 ARM_FEATURE_THUMB_DSP, /* DSP insns supported in the Thumb encodings */ 1603 ARM_FEATURE_PMU, /* has PMU support */ 1604 ARM_FEATURE_VBAR, /* has cp15 VBAR */ 1605 ARM_FEATURE_M_SECURITY, /* M profile Security Extension */ 1606 ARM_FEATURE_M_MAIN, /* M profile Main Extension */ 1607 }; 1608 1609 static inline int arm_feature(CPUARMState *env, int feature) 1610 { 1611 return (env->features & (1ULL << feature)) != 0; 1612 } 1613 1614 #if !defined(CONFIG_USER_ONLY) 1615 /* Return true if exception levels below EL3 are in secure state, 1616 * or would be following an exception return to that level. 1617 * Unlike arm_is_secure() (which is always a question about the 1618 * _current_ state of the CPU) this doesn't care about the current 1619 * EL or mode. 1620 */ 1621 static inline bool arm_is_secure_below_el3(CPUARMState *env) 1622 { 1623 if (arm_feature(env, ARM_FEATURE_EL3)) { 1624 return !(env->cp15.scr_el3 & SCR_NS); 1625 } else { 1626 /* If EL3 is not supported then the secure state is implementation 1627 * defined, in which case QEMU defaults to non-secure. 1628 */ 1629 return false; 1630 } 1631 } 1632 1633 /* Return true if the CPU is AArch64 EL3 or AArch32 Mon */ 1634 static inline bool arm_is_el3_or_mon(CPUARMState *env) 1635 { 1636 if (arm_feature(env, ARM_FEATURE_EL3)) { 1637 if (is_a64(env) && extract32(env->pstate, 2, 2) == 3) { 1638 /* CPU currently in AArch64 state and EL3 */ 1639 return true; 1640 } else if (!is_a64(env) && 1641 (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) { 1642 /* CPU currently in AArch32 state and monitor mode */ 1643 return true; 1644 } 1645 } 1646 return false; 1647 } 1648 1649 /* Return true if the processor is in secure state */ 1650 static inline bool arm_is_secure(CPUARMState *env) 1651 { 1652 if (arm_is_el3_or_mon(env)) { 1653 return true; 1654 } 1655 return arm_is_secure_below_el3(env); 1656 } 1657 1658 #else 1659 static inline bool arm_is_secure_below_el3(CPUARMState *env) 1660 { 1661 return false; 1662 } 1663 1664 static inline bool arm_is_secure(CPUARMState *env) 1665 { 1666 return false; 1667 } 1668 #endif 1669 1670 /* Return true if the specified exception level is running in AArch64 state. */ 1671 static inline bool arm_el_is_aa64(CPUARMState *env, int el) 1672 { 1673 /* This isn't valid for EL0 (if we're in EL0, is_a64() is what you want, 1674 * and if we're not in EL0 then the state of EL0 isn't well defined.) 1675 */ 1676 assert(el >= 1 && el <= 3); 1677 bool aa64 = arm_feature(env, ARM_FEATURE_AARCH64); 1678 1679 /* The highest exception level is always at the maximum supported 1680 * register width, and then lower levels have a register width controlled 1681 * by bits in the SCR or HCR registers. 1682 */ 1683 if (el == 3) { 1684 return aa64; 1685 } 1686 1687 if (arm_feature(env, ARM_FEATURE_EL3)) { 1688 aa64 = aa64 && (env->cp15.scr_el3 & SCR_RW); 1689 } 1690 1691 if (el == 2) { 1692 return aa64; 1693 } 1694 1695 if (arm_feature(env, ARM_FEATURE_EL2) && !arm_is_secure_below_el3(env)) { 1696 aa64 = aa64 && (env->cp15.hcr_el2 & HCR_RW); 1697 } 1698 1699 return aa64; 1700 } 1701 1702 /* Function for determing whether guest cp register reads and writes should 1703 * access the secure or non-secure bank of a cp register. When EL3 is 1704 * operating in AArch32 state, the NS-bit determines whether the secure 1705 * instance of a cp register should be used. When EL3 is AArch64 (or if 1706 * it doesn't exist at all) then there is no register banking, and all 1707 * accesses are to the non-secure version. 1708 */ 1709 static inline bool access_secure_reg(CPUARMState *env) 1710 { 1711 bool ret = (arm_feature(env, ARM_FEATURE_EL3) && 1712 !arm_el_is_aa64(env, 3) && 1713 !(env->cp15.scr_el3 & SCR_NS)); 1714 1715 return ret; 1716 } 1717 1718 /* Macros for accessing a specified CP register bank */ 1719 #define A32_BANKED_REG_GET(_env, _regname, _secure) \ 1720 ((_secure) ? (_env)->cp15._regname##_s : (_env)->cp15._regname##_ns) 1721 1722 #define A32_BANKED_REG_SET(_env, _regname, _secure, _val) \ 1723 do { \ 1724 if (_secure) { \ 1725 (_env)->cp15._regname##_s = (_val); \ 1726 } else { \ 1727 (_env)->cp15._regname##_ns = (_val); \ 1728 } \ 1729 } while (0) 1730 1731 /* Macros for automatically accessing a specific CP register bank depending on 1732 * the current secure state of the system. These macros are not intended for 1733 * supporting instruction translation reads/writes as these are dependent 1734 * solely on the SCR.NS bit and not the mode. 1735 */ 1736 #define A32_BANKED_CURRENT_REG_GET(_env, _regname) \ 1737 A32_BANKED_REG_GET((_env), _regname, \ 1738 (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3))) 1739 1740 #define A32_BANKED_CURRENT_REG_SET(_env, _regname, _val) \ 1741 A32_BANKED_REG_SET((_env), _regname, \ 1742 (arm_is_secure(_env) && !arm_el_is_aa64((_env), 3)), \ 1743 (_val)) 1744 1745 void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf); 1746 uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, 1747 uint32_t cur_el, bool secure); 1748 1749 /* Interface between CPU and Interrupt controller. */ 1750 #ifndef CONFIG_USER_ONLY 1751 bool armv7m_nvic_can_take_pending_exception(void *opaque); 1752 #else 1753 static inline bool armv7m_nvic_can_take_pending_exception(void *opaque) 1754 { 1755 return true; 1756 } 1757 #endif 1758 /** 1759 * armv7m_nvic_set_pending: mark the specified exception as pending 1760 * @opaque: the NVIC 1761 * @irq: the exception number to mark pending 1762 * @secure: false for non-banked exceptions or for the nonsecure 1763 * version of a banked exception, true for the secure version of a banked 1764 * exception. 1765 * 1766 * Marks the specified exception as pending. Note that we will assert() 1767 * if @secure is true and @irq does not specify one of the fixed set 1768 * of architecturally banked exceptions. 1769 */ 1770 void armv7m_nvic_set_pending(void *opaque, int irq, bool secure); 1771 /** 1772 * armv7m_nvic_set_pending_derived: mark this derived exception as pending 1773 * @opaque: the NVIC 1774 * @irq: the exception number to mark pending 1775 * @secure: false for non-banked exceptions or for the nonsecure 1776 * version of a banked exception, true for the secure version of a banked 1777 * exception. 1778 * 1779 * Similar to armv7m_nvic_set_pending(), but specifically for derived 1780 * exceptions (exceptions generated in the course of trying to take 1781 * a different exception). 1782 */ 1783 void armv7m_nvic_set_pending_derived(void *opaque, int irq, bool secure); 1784 /** 1785 * armv7m_nvic_get_pending_irq_info: return highest priority pending 1786 * exception, and whether it targets Secure state 1787 * @opaque: the NVIC 1788 * @pirq: set to pending exception number 1789 * @ptargets_secure: set to whether pending exception targets Secure 1790 * 1791 * This function writes the number of the highest priority pending 1792 * exception (the one which would be made active by 1793 * armv7m_nvic_acknowledge_irq()) to @pirq, and sets @ptargets_secure 1794 * to true if the current highest priority pending exception should 1795 * be taken to Secure state, false for NS. 1796 */ 1797 void armv7m_nvic_get_pending_irq_info(void *opaque, int *pirq, 1798 bool *ptargets_secure); 1799 /** 1800 * armv7m_nvic_acknowledge_irq: make highest priority pending exception active 1801 * @opaque: the NVIC 1802 * 1803 * Move the current highest priority pending exception from the pending 1804 * state to the active state, and update v7m.exception to indicate that 1805 * it is the exception currently being handled. 1806 */ 1807 void armv7m_nvic_acknowledge_irq(void *opaque); 1808 /** 1809 * armv7m_nvic_complete_irq: complete specified interrupt or exception 1810 * @opaque: the NVIC 1811 * @irq: the exception number to complete 1812 * @secure: true if this exception was secure 1813 * 1814 * Returns: -1 if the irq was not active 1815 * 1 if completing this irq brought us back to base (no active irqs) 1816 * 0 if there is still an irq active after this one was completed 1817 * (Ignoring -1, this is the same as the RETTOBASE value before completion.) 1818 */ 1819 int armv7m_nvic_complete_irq(void *opaque, int irq, bool secure); 1820 /** 1821 * armv7m_nvic_raw_execution_priority: return the raw execution priority 1822 * @opaque: the NVIC 1823 * 1824 * Returns: the raw execution priority as defined by the v8M architecture. 1825 * This is the execution priority minus the effects of AIRCR.PRIS, 1826 * and minus any PRIMASK/FAULTMASK/BASEPRI priority boosting. 1827 * (v8M ARM ARM I_PKLD.) 1828 */ 1829 int armv7m_nvic_raw_execution_priority(void *opaque); 1830 /** 1831 * armv7m_nvic_neg_prio_requested: return true if the requested execution 1832 * priority is negative for the specified security state. 1833 * @opaque: the NVIC 1834 * @secure: the security state to test 1835 * This corresponds to the pseudocode IsReqExecPriNeg(). 1836 */ 1837 #ifndef CONFIG_USER_ONLY 1838 bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure); 1839 #else 1840 static inline bool armv7m_nvic_neg_prio_requested(void *opaque, bool secure) 1841 { 1842 return false; 1843 } 1844 #endif 1845 1846 /* Interface for defining coprocessor registers. 1847 * Registers are defined in tables of arm_cp_reginfo structs 1848 * which are passed to define_arm_cp_regs(). 1849 */ 1850 1851 /* When looking up a coprocessor register we look for it 1852 * via an integer which encodes all of: 1853 * coprocessor number 1854 * Crn, Crm, opc1, opc2 fields 1855 * 32 or 64 bit register (ie is it accessed via MRC/MCR 1856 * or via MRRC/MCRR?) 1857 * non-secure/secure bank (AArch32 only) 1858 * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field. 1859 * (In this case crn and opc2 should be zero.) 1860 * For AArch64, there is no 32/64 bit size distinction; 1861 * instead all registers have a 2 bit op0, 3 bit op1 and op2, 1862 * and 4 bit CRn and CRm. The encoding patterns are chosen 1863 * to be easy to convert to and from the KVM encodings, and also 1864 * so that the hashtable can contain both AArch32 and AArch64 1865 * registers (to allow for interprocessing where we might run 1866 * 32 bit code on a 64 bit core). 1867 */ 1868 /* This bit is private to our hashtable cpreg; in KVM register 1869 * IDs the AArch64/32 distinction is the KVM_REG_ARM/ARM64 1870 * in the upper bits of the 64 bit ID. 1871 */ 1872 #define CP_REG_AA64_SHIFT 28 1873 #define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT) 1874 1875 /* To enable banking of coprocessor registers depending on ns-bit we 1876 * add a bit to distinguish between secure and non-secure cpregs in the 1877 * hashtable. 1878 */ 1879 #define CP_REG_NS_SHIFT 29 1880 #define CP_REG_NS_MASK (1 << CP_REG_NS_SHIFT) 1881 1882 #define ENCODE_CP_REG(cp, is64, ns, crn, crm, opc1, opc2) \ 1883 ((ns) << CP_REG_NS_SHIFT | ((cp) << 16) | ((is64) << 15) | \ 1884 ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2)) 1885 1886 #define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \ 1887 (CP_REG_AA64_MASK | \ 1888 ((cp) << CP_REG_ARM_COPROC_SHIFT) | \ 1889 ((op0) << CP_REG_ARM64_SYSREG_OP0_SHIFT) | \ 1890 ((op1) << CP_REG_ARM64_SYSREG_OP1_SHIFT) | \ 1891 ((crn) << CP_REG_ARM64_SYSREG_CRN_SHIFT) | \ 1892 ((crm) << CP_REG_ARM64_SYSREG_CRM_SHIFT) | \ 1893 ((op2) << CP_REG_ARM64_SYSREG_OP2_SHIFT)) 1894 1895 /* Convert a full 64 bit KVM register ID to the truncated 32 bit 1896 * version used as a key for the coprocessor register hashtable 1897 */ 1898 static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid) 1899 { 1900 uint32_t cpregid = kvmid; 1901 if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) { 1902 cpregid |= CP_REG_AA64_MASK; 1903 } else { 1904 if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) { 1905 cpregid |= (1 << 15); 1906 } 1907 1908 /* KVM is always non-secure so add the NS flag on AArch32 register 1909 * entries. 1910 */ 1911 cpregid |= 1 << CP_REG_NS_SHIFT; 1912 } 1913 return cpregid; 1914 } 1915 1916 /* Convert a truncated 32 bit hashtable key into the full 1917 * 64 bit KVM register ID. 1918 */ 1919 static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) 1920 { 1921 uint64_t kvmid; 1922 1923 if (cpregid & CP_REG_AA64_MASK) { 1924 kvmid = cpregid & ~CP_REG_AA64_MASK; 1925 kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM64; 1926 } else { 1927 kvmid = cpregid & ~(1 << 15); 1928 if (cpregid & (1 << 15)) { 1929 kvmid |= CP_REG_SIZE_U64 | CP_REG_ARM; 1930 } else { 1931 kvmid |= CP_REG_SIZE_U32 | CP_REG_ARM; 1932 } 1933 } 1934 return kvmid; 1935 } 1936 1937 /* ARMCPRegInfo type field bits. If the SPECIAL bit is set this is a 1938 * special-behaviour cp reg and bits [11..8] indicate what behaviour 1939 * it has. Otherwise it is a simple cp reg, where CONST indicates that 1940 * TCG can assume the value to be constant (ie load at translate time) 1941 * and 64BIT indicates a 64 bit wide coprocessor register. SUPPRESS_TB_END 1942 * indicates that the TB should not be ended after a write to this register 1943 * (the default is that the TB ends after cp writes). OVERRIDE permits 1944 * a register definition to override a previous definition for the 1945 * same (cp, is64, crn, crm, opc1, opc2) tuple: either the new or the 1946 * old must have the OVERRIDE bit set. 1947 * ALIAS indicates that this register is an alias view of some underlying 1948 * state which is also visible via another register, and that the other 1949 * register is handling migration and reset; registers marked ALIAS will not be 1950 * migrated but may have their state set by syncing of register state from KVM. 1951 * NO_RAW indicates that this register has no underlying state and does not 1952 * support raw access for state saving/loading; it will not be used for either 1953 * migration or KVM state synchronization. (Typically this is for "registers" 1954 * which are actually used as instructions for cache maintenance and so on.) 1955 * IO indicates that this register does I/O and therefore its accesses 1956 * need to be surrounded by gen_io_start()/gen_io_end(). In particular, 1957 * registers which implement clocks or timers require this. 1958 */ 1959 #define ARM_CP_SPECIAL 0x0001 1960 #define ARM_CP_CONST 0x0002 1961 #define ARM_CP_64BIT 0x0004 1962 #define ARM_CP_SUPPRESS_TB_END 0x0008 1963 #define ARM_CP_OVERRIDE 0x0010 1964 #define ARM_CP_ALIAS 0x0020 1965 #define ARM_CP_IO 0x0040 1966 #define ARM_CP_NO_RAW 0x0080 1967 #define ARM_CP_NOP (ARM_CP_SPECIAL | 0x0100) 1968 #define ARM_CP_WFI (ARM_CP_SPECIAL | 0x0200) 1969 #define ARM_CP_NZCV (ARM_CP_SPECIAL | 0x0300) 1970 #define ARM_CP_CURRENTEL (ARM_CP_SPECIAL | 0x0400) 1971 #define ARM_CP_DC_ZVA (ARM_CP_SPECIAL | 0x0500) 1972 #define ARM_LAST_SPECIAL ARM_CP_DC_ZVA 1973 #define ARM_CP_FPU 0x1000 1974 #define ARM_CP_SVE 0x2000 1975 #define ARM_CP_NO_GDB 0x4000 1976 /* Used only as a terminator for ARMCPRegInfo lists */ 1977 #define ARM_CP_SENTINEL 0xffff 1978 /* Mask of only the flag bits in a type field */ 1979 #define ARM_CP_FLAG_MASK 0x70ff 1980 1981 /* Valid values for ARMCPRegInfo state field, indicating which of 1982 * the AArch32 and AArch64 execution states this register is visible in. 1983 * If the reginfo doesn't explicitly specify then it is AArch32 only. 1984 * If the reginfo is declared to be visible in both states then a second 1985 * reginfo is synthesised for the AArch32 view of the AArch64 register, 1986 * such that the AArch32 view is the lower 32 bits of the AArch64 one. 1987 * Note that we rely on the values of these enums as we iterate through 1988 * the various states in some places. 1989 */ 1990 enum { 1991 ARM_CP_STATE_AA32 = 0, 1992 ARM_CP_STATE_AA64 = 1, 1993 ARM_CP_STATE_BOTH = 2, 1994 }; 1995 1996 /* ARM CP register secure state flags. These flags identify security state 1997 * attributes for a given CP register entry. 1998 * The existence of both or neither secure and non-secure flags indicates that 1999 * the register has both a secure and non-secure hash entry. A single one of 2000 * these flags causes the register to only be hashed for the specified 2001 * security state. 2002 * Although definitions may have any combination of the S/NS bits, each 2003 * registered entry will only have one to identify whether the entry is secure 2004 * or non-secure. 2005 */ 2006 enum { 2007 ARM_CP_SECSTATE_S = (1 << 0), /* bit[0]: Secure state register */ 2008 ARM_CP_SECSTATE_NS = (1 << 1), /* bit[1]: Non-secure state register */ 2009 }; 2010 2011 /* Return true if cptype is a valid type field. This is used to try to 2012 * catch errors where the sentinel has been accidentally left off the end 2013 * of a list of registers. 2014 */ 2015 static inline bool cptype_valid(int cptype) 2016 { 2017 return ((cptype & ~ARM_CP_FLAG_MASK) == 0) 2018 || ((cptype & ARM_CP_SPECIAL) && 2019 ((cptype & ~ARM_CP_FLAG_MASK) <= ARM_LAST_SPECIAL)); 2020 } 2021 2022 /* Access rights: 2023 * We define bits for Read and Write access for what rev C of the v7-AR ARM ARM 2024 * defines as PL0 (user), PL1 (fiq/irq/svc/abt/und/sys, ie privileged), and 2025 * PL2 (hyp). The other level which has Read and Write bits is Secure PL1 2026 * (ie any of the privileged modes in Secure state, or Monitor mode). 2027 * If a register is accessible in one privilege level it's always accessible 2028 * in higher privilege levels too. Since "Secure PL1" also follows this rule 2029 * (ie anything visible in PL2 is visible in S-PL1, some things are only 2030 * visible in S-PL1) but "Secure PL1" is a bit of a mouthful, we bend the 2031 * terminology a little and call this PL3. 2032 * In AArch64 things are somewhat simpler as the PLx bits line up exactly 2033 * with the ELx exception levels. 2034 * 2035 * If access permissions for a register are more complex than can be 2036 * described with these bits, then use a laxer set of restrictions, and 2037 * do the more restrictive/complex check inside a helper function. 2038 */ 2039 #define PL3_R 0x80 2040 #define PL3_W 0x40 2041 #define PL2_R (0x20 | PL3_R) 2042 #define PL2_W (0x10 | PL3_W) 2043 #define PL1_R (0x08 | PL2_R) 2044 #define PL1_W (0x04 | PL2_W) 2045 #define PL0_R (0x02 | PL1_R) 2046 #define PL0_W (0x01 | PL1_W) 2047 2048 #define PL3_RW (PL3_R | PL3_W) 2049 #define PL2_RW (PL2_R | PL2_W) 2050 #define PL1_RW (PL1_R | PL1_W) 2051 #define PL0_RW (PL0_R | PL0_W) 2052 2053 /* Return the highest implemented Exception Level */ 2054 static inline int arm_highest_el(CPUARMState *env) 2055 { 2056 if (arm_feature(env, ARM_FEATURE_EL3)) { 2057 return 3; 2058 } 2059 if (arm_feature(env, ARM_FEATURE_EL2)) { 2060 return 2; 2061 } 2062 return 1; 2063 } 2064 2065 /* Return true if a v7M CPU is in Handler mode */ 2066 static inline bool arm_v7m_is_handler_mode(CPUARMState *env) 2067 { 2068 return env->v7m.exception != 0; 2069 } 2070 2071 /* Return the current Exception Level (as per ARMv8; note that this differs 2072 * from the ARMv7 Privilege Level). 2073 */ 2074 static inline int arm_current_el(CPUARMState *env) 2075 { 2076 if (arm_feature(env, ARM_FEATURE_M)) { 2077 return arm_v7m_is_handler_mode(env) || 2078 !(env->v7m.control[env->v7m.secure] & 1); 2079 } 2080 2081 if (is_a64(env)) { 2082 return extract32(env->pstate, 2, 2); 2083 } 2084 2085 switch (env->uncached_cpsr & 0x1f) { 2086 case ARM_CPU_MODE_USR: 2087 return 0; 2088 case ARM_CPU_MODE_HYP: 2089 return 2; 2090 case ARM_CPU_MODE_MON: 2091 return 3; 2092 default: 2093 if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { 2094 /* If EL3 is 32-bit then all secure privileged modes run in 2095 * EL3 2096 */ 2097 return 3; 2098 } 2099 2100 return 1; 2101 } 2102 } 2103 2104 typedef struct ARMCPRegInfo ARMCPRegInfo; 2105 2106 typedef enum CPAccessResult { 2107 /* Access is permitted */ 2108 CP_ACCESS_OK = 0, 2109 /* Access fails due to a configurable trap or enable which would 2110 * result in a categorized exception syndrome giving information about 2111 * the failing instruction (ie syndrome category 0x3, 0x4, 0x5, 0x6, 2112 * 0xc or 0x18). The exception is taken to the usual target EL (EL1 or 2113 * PL1 if in EL0, otherwise to the current EL). 2114 */ 2115 CP_ACCESS_TRAP = 1, 2116 /* Access fails and results in an exception syndrome 0x0 ("uncategorized"). 2117 * Note that this is not a catch-all case -- the set of cases which may 2118 * result in this failure is specifically defined by the architecture. 2119 */ 2120 CP_ACCESS_TRAP_UNCATEGORIZED = 2, 2121 /* As CP_ACCESS_TRAP, but for traps directly to EL2 or EL3 */ 2122 CP_ACCESS_TRAP_EL2 = 3, 2123 CP_ACCESS_TRAP_EL3 = 4, 2124 /* As CP_ACCESS_UNCATEGORIZED, but for traps directly to EL2 or EL3 */ 2125 CP_ACCESS_TRAP_UNCATEGORIZED_EL2 = 5, 2126 CP_ACCESS_TRAP_UNCATEGORIZED_EL3 = 6, 2127 /* Access fails and results in an exception syndrome for an FP access, 2128 * trapped directly to EL2 or EL3 2129 */ 2130 CP_ACCESS_TRAP_FP_EL2 = 7, 2131 CP_ACCESS_TRAP_FP_EL3 = 8, 2132 } CPAccessResult; 2133 2134 /* Access functions for coprocessor registers. These cannot fail and 2135 * may not raise exceptions. 2136 */ 2137 typedef uint64_t CPReadFn(CPUARMState *env, const ARMCPRegInfo *opaque); 2138 typedef void CPWriteFn(CPUARMState *env, const ARMCPRegInfo *opaque, 2139 uint64_t value); 2140 /* Access permission check functions for coprocessor registers. */ 2141 typedef CPAccessResult CPAccessFn(CPUARMState *env, 2142 const ARMCPRegInfo *opaque, 2143 bool isread); 2144 /* Hook function for register reset */ 2145 typedef void CPResetFn(CPUARMState *env, const ARMCPRegInfo *opaque); 2146 2147 #define CP_ANY 0xff 2148 2149 /* Definition of an ARM coprocessor register */ 2150 struct ARMCPRegInfo { 2151 /* Name of register (useful mainly for debugging, need not be unique) */ 2152 const char *name; 2153 /* Location of register: coprocessor number and (crn,crm,opc1,opc2) 2154 * tuple. Any of crm, opc1 and opc2 may be CP_ANY to indicate a 2155 * 'wildcard' field -- any value of that field in the MRC/MCR insn 2156 * will be decoded to this register. The register read and write 2157 * callbacks will be passed an ARMCPRegInfo with the crn/crm/opc1/opc2 2158 * used by the program, so it is possible to register a wildcard and 2159 * then behave differently on read/write if necessary. 2160 * For 64 bit registers, only crm and opc1 are relevant; crn and opc2 2161 * must both be zero. 2162 * For AArch64-visible registers, opc0 is also used. 2163 * Since there are no "coprocessors" in AArch64, cp is purely used as a 2164 * way to distinguish (for KVM's benefit) guest-visible system registers 2165 * from demuxed ones provided to preserve the "no side effects on 2166 * KVM register read/write from QEMU" semantics. cp==0x13 is guest 2167 * visible (to match KVM's encoding); cp==0 will be converted to 2168 * cp==0x13 when the ARMCPRegInfo is registered, for convenience. 2169 */ 2170 uint8_t cp; 2171 uint8_t crn; 2172 uint8_t crm; 2173 uint8_t opc0; 2174 uint8_t opc1; 2175 uint8_t opc2; 2176 /* Execution state in which this register is visible: ARM_CP_STATE_* */ 2177 int state; 2178 /* Register type: ARM_CP_* bits/values */ 2179 int type; 2180 /* Access rights: PL*_[RW] */ 2181 int access; 2182 /* Security state: ARM_CP_SECSTATE_* bits/values */ 2183 int secure; 2184 /* The opaque pointer passed to define_arm_cp_regs_with_opaque() when 2185 * this register was defined: can be used to hand data through to the 2186 * register read/write functions, since they are passed the ARMCPRegInfo*. 2187 */ 2188 void *opaque; 2189 /* Value of this register, if it is ARM_CP_CONST. Otherwise, if 2190 * fieldoffset is non-zero, the reset value of the register. 2191 */ 2192 uint64_t resetvalue; 2193 /* Offset of the field in CPUARMState for this register. 2194 * 2195 * This is not needed if either: 2196 * 1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs 2197 * 2. both readfn and writefn are specified 2198 */ 2199 ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */ 2200 2201 /* Offsets of the secure and non-secure fields in CPUARMState for the 2202 * register if it is banked. These fields are only used during the static 2203 * registration of a register. During hashing the bank associated 2204 * with a given security state is copied to fieldoffset which is used from 2205 * there on out. 2206 * 2207 * It is expected that register definitions use either fieldoffset or 2208 * bank_fieldoffsets in the definition but not both. It is also expected 2209 * that both bank offsets are set when defining a banked register. This 2210 * use indicates that a register is banked. 2211 */ 2212 ptrdiff_t bank_fieldoffsets[2]; 2213 2214 /* Function for making any access checks for this register in addition to 2215 * those specified by the 'access' permissions bits. If NULL, no extra 2216 * checks required. The access check is performed at runtime, not at 2217 * translate time. 2218 */ 2219 CPAccessFn *accessfn; 2220 /* Function for handling reads of this register. If NULL, then reads 2221 * will be done by loading from the offset into CPUARMState specified 2222 * by fieldoffset. 2223 */ 2224 CPReadFn *readfn; 2225 /* Function for handling writes of this register. If NULL, then writes 2226 * will be done by writing to the offset into CPUARMState specified 2227 * by fieldoffset. 2228 */ 2229 CPWriteFn *writefn; 2230 /* Function for doing a "raw" read; used when we need to copy 2231 * coprocessor state to the kernel for KVM or out for 2232 * migration. This only needs to be provided if there is also a 2233 * readfn and it has side effects (for instance clear-on-read bits). 2234 */ 2235 CPReadFn *raw_readfn; 2236 /* Function for doing a "raw" write; used when we need to copy KVM 2237 * kernel coprocessor state into userspace, or for inbound 2238 * migration. This only needs to be provided if there is also a 2239 * writefn and it masks out "unwritable" bits or has write-one-to-clear 2240 * or similar behaviour. 2241 */ 2242 CPWriteFn *raw_writefn; 2243 /* Function for resetting the register. If NULL, then reset will be done 2244 * by writing resetvalue to the field specified in fieldoffset. If 2245 * fieldoffset is 0 then no reset will be done. 2246 */ 2247 CPResetFn *resetfn; 2248 }; 2249 2250 /* Macros which are lvalues for the field in CPUARMState for the 2251 * ARMCPRegInfo *ri. 2252 */ 2253 #define CPREG_FIELD32(env, ri) \ 2254 (*(uint32_t *)((char *)(env) + (ri)->fieldoffset)) 2255 #define CPREG_FIELD64(env, ri) \ 2256 (*(uint64_t *)((char *)(env) + (ri)->fieldoffset)) 2257 2258 #define REGINFO_SENTINEL { .type = ARM_CP_SENTINEL } 2259 2260 void define_arm_cp_regs_with_opaque(ARMCPU *cpu, 2261 const ARMCPRegInfo *regs, void *opaque); 2262 void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, 2263 const ARMCPRegInfo *regs, void *opaque); 2264 static inline void define_arm_cp_regs(ARMCPU *cpu, const ARMCPRegInfo *regs) 2265 { 2266 define_arm_cp_regs_with_opaque(cpu, regs, 0); 2267 } 2268 static inline void define_one_arm_cp_reg(ARMCPU *cpu, const ARMCPRegInfo *regs) 2269 { 2270 define_one_arm_cp_reg_with_opaque(cpu, regs, 0); 2271 } 2272 const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp); 2273 2274 /* CPWriteFn that can be used to implement writes-ignored behaviour */ 2275 void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, 2276 uint64_t value); 2277 /* CPReadFn that can be used for read-as-zero behaviour */ 2278 uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri); 2279 2280 /* CPResetFn that does nothing, for use if no reset is required even 2281 * if fieldoffset is non zero. 2282 */ 2283 void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque); 2284 2285 /* Return true if this reginfo struct's field in the cpu state struct 2286 * is 64 bits wide. 2287 */ 2288 static inline bool cpreg_field_is_64bit(const ARMCPRegInfo *ri) 2289 { 2290 return (ri->state == ARM_CP_STATE_AA64) || (ri->type & ARM_CP_64BIT); 2291 } 2292 2293 static inline bool cp_access_ok(int current_el, 2294 const ARMCPRegInfo *ri, int isread) 2295 { 2296 return (ri->access >> ((current_el * 2) + isread)) & 1; 2297 } 2298 2299 /* Raw read of a coprocessor register (as needed for migration, etc) */ 2300 uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri); 2301 2302 /** 2303 * write_list_to_cpustate 2304 * @cpu: ARMCPU 2305 * 2306 * For each register listed in the ARMCPU cpreg_indexes list, write 2307 * its value from the cpreg_values list into the ARMCPUState structure. 2308 * This updates TCG's working data structures from KVM data or 2309 * from incoming migration state. 2310 * 2311 * Returns: true if all register values were updated correctly, 2312 * false if some register was unknown or could not be written. 2313 * Note that we do not stop early on failure -- we will attempt 2314 * writing all registers in the list. 2315 */ 2316 bool write_list_to_cpustate(ARMCPU *cpu); 2317 2318 /** 2319 * write_cpustate_to_list: 2320 * @cpu: ARMCPU 2321 * 2322 * For each register listed in the ARMCPU cpreg_indexes list, write 2323 * its value from the ARMCPUState structure into the cpreg_values list. 2324 * This is used to copy info from TCG's working data structures into 2325 * KVM or for outbound migration. 2326 * 2327 * Returns: true if all register values were read correctly, 2328 * false if some register was unknown or could not be read. 2329 * Note that we do not stop early on failure -- we will attempt 2330 * reading all registers in the list. 2331 */ 2332 bool write_cpustate_to_list(ARMCPU *cpu); 2333 2334 #define ARM_CPUID_TI915T 0x54029152 2335 #define ARM_CPUID_TI925T 0x54029252 2336 2337 #if defined(CONFIG_USER_ONLY) 2338 #define TARGET_PAGE_BITS 12 2339 #else 2340 /* ARMv7 and later CPUs have 4K pages minimum, but ARMv5 and v6 2341 * have to support 1K tiny pages. 2342 */ 2343 #define TARGET_PAGE_BITS_VARY 2344 #define TARGET_PAGE_BITS_MIN 10 2345 #endif 2346 2347 #if defined(TARGET_AARCH64) 2348 # define TARGET_PHYS_ADDR_SPACE_BITS 48 2349 # define TARGET_VIRT_ADDR_SPACE_BITS 64 2350 #else 2351 # define TARGET_PHYS_ADDR_SPACE_BITS 40 2352 # define TARGET_VIRT_ADDR_SPACE_BITS 32 2353 #endif 2354 2355 /** 2356 * arm_hcr_el2_imo(): Return the effective value of HCR_EL2.IMO. 2357 * Depending on the values of HCR_EL2.E2H and TGE, this may be 2358 * "behaves as 1 for all purposes other than direct read/write" or 2359 * "behaves as 0 for all purposes other than direct read/write" 2360 */ 2361 static inline bool arm_hcr_el2_imo(CPUARMState *env) 2362 { 2363 switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) { 2364 case HCR_TGE: 2365 return true; 2366 case HCR_TGE | HCR_E2H: 2367 return false; 2368 default: 2369 return env->cp15.hcr_el2 & HCR_IMO; 2370 } 2371 } 2372 2373 /** 2374 * arm_hcr_el2_fmo(): Return the effective value of HCR_EL2.FMO. 2375 */ 2376 static inline bool arm_hcr_el2_fmo(CPUARMState *env) 2377 { 2378 switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) { 2379 case HCR_TGE: 2380 return true; 2381 case HCR_TGE | HCR_E2H: 2382 return false; 2383 default: 2384 return env->cp15.hcr_el2 & HCR_FMO; 2385 } 2386 } 2387 2388 /** 2389 * arm_hcr_el2_amo(): Return the effective value of HCR_EL2.AMO. 2390 */ 2391 static inline bool arm_hcr_el2_amo(CPUARMState *env) 2392 { 2393 switch (env->cp15.hcr_el2 & (HCR_TGE | HCR_E2H)) { 2394 case HCR_TGE: 2395 return true; 2396 case HCR_TGE | HCR_E2H: 2397 return false; 2398 default: 2399 return env->cp15.hcr_el2 & HCR_AMO; 2400 } 2401 } 2402 2403 static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, 2404 unsigned int target_el) 2405 { 2406 CPUARMState *env = cs->env_ptr; 2407 unsigned int cur_el = arm_current_el(env); 2408 bool secure = arm_is_secure(env); 2409 bool pstate_unmasked; 2410 int8_t unmasked = 0; 2411 2412 /* Don't take exceptions if they target a lower EL. 2413 * This check should catch any exceptions that would not be taken but left 2414 * pending. 2415 */ 2416 if (cur_el > target_el) { 2417 return false; 2418 } 2419 2420 switch (excp_idx) { 2421 case EXCP_FIQ: 2422 pstate_unmasked = !(env->daif & PSTATE_F); 2423 break; 2424 2425 case EXCP_IRQ: 2426 pstate_unmasked = !(env->daif & PSTATE_I); 2427 break; 2428 2429 case EXCP_VFIQ: 2430 if (secure || !arm_hcr_el2_fmo(env) || (env->cp15.hcr_el2 & HCR_TGE)) { 2431 /* VFIQs are only taken when hypervized and non-secure. */ 2432 return false; 2433 } 2434 return !(env->daif & PSTATE_F); 2435 case EXCP_VIRQ: 2436 if (secure || !arm_hcr_el2_imo(env) || (env->cp15.hcr_el2 & HCR_TGE)) { 2437 /* VIRQs are only taken when hypervized and non-secure. */ 2438 return false; 2439 } 2440 return !(env->daif & PSTATE_I); 2441 default: 2442 g_assert_not_reached(); 2443 } 2444 2445 /* Use the target EL, current execution state and SCR/HCR settings to 2446 * determine whether the corresponding CPSR bit is used to mask the 2447 * interrupt. 2448 */ 2449 if ((target_el > cur_el) && (target_el != 1)) { 2450 /* Exceptions targeting a higher EL may not be maskable */ 2451 if (arm_feature(env, ARM_FEATURE_AARCH64)) { 2452 /* 64-bit masking rules are simple: exceptions to EL3 2453 * can't be masked, and exceptions to EL2 can only be 2454 * masked from Secure state. The HCR and SCR settings 2455 * don't affect the masking logic, only the interrupt routing. 2456 */ 2457 if (target_el == 3 || !secure) { 2458 unmasked = 1; 2459 } 2460 } else { 2461 /* The old 32-bit-only environment has a more complicated 2462 * masking setup. HCR and SCR bits not only affect interrupt 2463 * routing but also change the behaviour of masking. 2464 */ 2465 bool hcr, scr; 2466 2467 switch (excp_idx) { 2468 case EXCP_FIQ: 2469 /* If FIQs are routed to EL3 or EL2 then there are cases where 2470 * we override the CPSR.F in determining if the exception is 2471 * masked or not. If neither of these are set then we fall back 2472 * to the CPSR.F setting otherwise we further assess the state 2473 * below. 2474 */ 2475 hcr = arm_hcr_el2_fmo(env); 2476 scr = (env->cp15.scr_el3 & SCR_FIQ); 2477 2478 /* When EL3 is 32-bit, the SCR.FW bit controls whether the 2479 * CPSR.F bit masks FIQ interrupts when taken in non-secure 2480 * state. If SCR.FW is set then FIQs can be masked by CPSR.F 2481 * when non-secure but only when FIQs are only routed to EL3. 2482 */ 2483 scr = scr && !((env->cp15.scr_el3 & SCR_FW) && !hcr); 2484 break; 2485 case EXCP_IRQ: 2486 /* When EL3 execution state is 32-bit, if HCR.IMO is set then 2487 * we may override the CPSR.I masking when in non-secure state. 2488 * The SCR.IRQ setting has already been taken into consideration 2489 * when setting the target EL, so it does not have a further 2490 * affect here. 2491 */ 2492 hcr = arm_hcr_el2_imo(env); 2493 scr = false; 2494 break; 2495 default: 2496 g_assert_not_reached(); 2497 } 2498 2499 if ((scr || hcr) && !secure) { 2500 unmasked = 1; 2501 } 2502 } 2503 } 2504 2505 /* The PSTATE bits only mask the interrupt if we have not overriden the 2506 * ability above. 2507 */ 2508 return unmasked || pstate_unmasked; 2509 } 2510 2511 #define ARM_CPU_TYPE_SUFFIX "-" TYPE_ARM_CPU 2512 #define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX) 2513 #define CPU_RESOLVING_TYPE TYPE_ARM_CPU 2514 2515 #define cpu_signal_handler cpu_arm_signal_handler 2516 #define cpu_list arm_cpu_list 2517 2518 /* ARM has the following "translation regimes" (as the ARM ARM calls them): 2519 * 2520 * If EL3 is 64-bit: 2521 * + NonSecure EL1 & 0 stage 1 2522 * + NonSecure EL1 & 0 stage 2 2523 * + NonSecure EL2 2524 * + Secure EL1 & EL0 2525 * + Secure EL3 2526 * If EL3 is 32-bit: 2527 * + NonSecure PL1 & 0 stage 1 2528 * + NonSecure PL1 & 0 stage 2 2529 * + NonSecure PL2 2530 * + Secure PL0 & PL1 2531 * (reminder: for 32 bit EL3, Secure PL1 is *EL3*, not EL1.) 2532 * 2533 * For QEMU, an mmu_idx is not quite the same as a translation regime because: 2534 * 1. we need to split the "EL1 & 0" regimes into two mmu_idxes, because they 2535 * may differ in access permissions even if the VA->PA map is the same 2536 * 2. we want to cache in our TLB the full VA->IPA->PA lookup for a stage 1+2 2537 * translation, which means that we have one mmu_idx that deals with two 2538 * concatenated translation regimes [this sort of combined s1+2 TLB is 2539 * architecturally permitted] 2540 * 3. we don't need to allocate an mmu_idx to translations that we won't be 2541 * handling via the TLB. The only way to do a stage 1 translation without 2542 * the immediate stage 2 translation is via the ATS or AT system insns, 2543 * which can be slow-pathed and always do a page table walk. 2544 * 4. we can also safely fold together the "32 bit EL3" and "64 bit EL3" 2545 * translation regimes, because they map reasonably well to each other 2546 * and they can't both be active at the same time. 2547 * This gives us the following list of mmu_idx values: 2548 * 2549 * NS EL0 (aka NS PL0) stage 1+2 2550 * NS EL1 (aka NS PL1) stage 1+2 2551 * NS EL2 (aka NS PL2) 2552 * S EL3 (aka S PL1) 2553 * S EL0 (aka S PL0) 2554 * S EL1 (not used if EL3 is 32 bit) 2555 * NS EL0+1 stage 2 2556 * 2557 * (The last of these is an mmu_idx because we want to be able to use the TLB 2558 * for the accesses done as part of a stage 1 page table walk, rather than 2559 * having to walk the stage 2 page table over and over.) 2560 * 2561 * R profile CPUs have an MPU, but can use the same set of MMU indexes 2562 * as A profile. They only need to distinguish NS EL0 and NS EL1 (and 2563 * NS EL2 if we ever model a Cortex-R52). 2564 * 2565 * M profile CPUs are rather different as they do not have a true MMU. 2566 * They have the following different MMU indexes: 2567 * User 2568 * Privileged 2569 * User, execution priority negative (ie the MPU HFNMIENA bit may apply) 2570 * Privileged, execution priority negative (ditto) 2571 * If the CPU supports the v8M Security Extension then there are also: 2572 * Secure User 2573 * Secure Privileged 2574 * Secure User, execution priority negative 2575 * Secure Privileged, execution priority negative 2576 * 2577 * The ARMMMUIdx and the mmu index value used by the core QEMU TLB code 2578 * are not quite the same -- different CPU types (most notably M profile 2579 * vs A/R profile) would like to use MMU indexes with different semantics, 2580 * but since we don't ever need to use all of those in a single CPU we 2581 * can avoid setting NB_MMU_MODES to more than 8. The lower bits of 2582 * ARMMMUIdx are the core TLB mmu index, and the higher bits are always 2583 * the same for any particular CPU. 2584 * Variables of type ARMMUIdx are always full values, and the core 2585 * index values are in variables of type 'int'. 2586 * 2587 * Our enumeration includes at the end some entries which are not "true" 2588 * mmu_idx values in that they don't have corresponding TLBs and are only 2589 * valid for doing slow path page table walks. 2590 * 2591 * The constant names here are patterned after the general style of the names 2592 * of the AT/ATS operations. 2593 * The values used are carefully arranged to make mmu_idx => EL lookup easy. 2594 * For M profile we arrange them to have a bit for priv, a bit for negpri 2595 * and a bit for secure. 2596 */ 2597 #define ARM_MMU_IDX_A 0x10 /* A profile */ 2598 #define ARM_MMU_IDX_NOTLB 0x20 /* does not have a TLB */ 2599 #define ARM_MMU_IDX_M 0x40 /* M profile */ 2600 2601 /* meanings of the bits for M profile mmu idx values */ 2602 #define ARM_MMU_IDX_M_PRIV 0x1 2603 #define ARM_MMU_IDX_M_NEGPRI 0x2 2604 #define ARM_MMU_IDX_M_S 0x4 2605 2606 #define ARM_MMU_IDX_TYPE_MASK (~0x7) 2607 #define ARM_MMU_IDX_COREIDX_MASK 0x7 2608 2609 typedef enum ARMMMUIdx { 2610 ARMMMUIdx_S12NSE0 = 0 | ARM_MMU_IDX_A, 2611 ARMMMUIdx_S12NSE1 = 1 | ARM_MMU_IDX_A, 2612 ARMMMUIdx_S1E2 = 2 | ARM_MMU_IDX_A, 2613 ARMMMUIdx_S1E3 = 3 | ARM_MMU_IDX_A, 2614 ARMMMUIdx_S1SE0 = 4 | ARM_MMU_IDX_A, 2615 ARMMMUIdx_S1SE1 = 5 | ARM_MMU_IDX_A, 2616 ARMMMUIdx_S2NS = 6 | ARM_MMU_IDX_A, 2617 ARMMMUIdx_MUser = 0 | ARM_MMU_IDX_M, 2618 ARMMMUIdx_MPriv = 1 | ARM_MMU_IDX_M, 2619 ARMMMUIdx_MUserNegPri = 2 | ARM_MMU_IDX_M, 2620 ARMMMUIdx_MPrivNegPri = 3 | ARM_MMU_IDX_M, 2621 ARMMMUIdx_MSUser = 4 | ARM_MMU_IDX_M, 2622 ARMMMUIdx_MSPriv = 5 | ARM_MMU_IDX_M, 2623 ARMMMUIdx_MSUserNegPri = 6 | ARM_MMU_IDX_M, 2624 ARMMMUIdx_MSPrivNegPri = 7 | ARM_MMU_IDX_M, 2625 /* Indexes below here don't have TLBs and are used only for AT system 2626 * instructions or for the first stage of an S12 page table walk. 2627 */ 2628 ARMMMUIdx_S1NSE0 = 0 | ARM_MMU_IDX_NOTLB, 2629 ARMMMUIdx_S1NSE1 = 1 | ARM_MMU_IDX_NOTLB, 2630 } ARMMMUIdx; 2631 2632 /* Bit macros for the core-mmu-index values for each index, 2633 * for use when calling tlb_flush_by_mmuidx() and friends. 2634 */ 2635 typedef enum ARMMMUIdxBit { 2636 ARMMMUIdxBit_S12NSE0 = 1 << 0, 2637 ARMMMUIdxBit_S12NSE1 = 1 << 1, 2638 ARMMMUIdxBit_S1E2 = 1 << 2, 2639 ARMMMUIdxBit_S1E3 = 1 << 3, 2640 ARMMMUIdxBit_S1SE0 = 1 << 4, 2641 ARMMMUIdxBit_S1SE1 = 1 << 5, 2642 ARMMMUIdxBit_S2NS = 1 << 6, 2643 ARMMMUIdxBit_MUser = 1 << 0, 2644 ARMMMUIdxBit_MPriv = 1 << 1, 2645 ARMMMUIdxBit_MUserNegPri = 1 << 2, 2646 ARMMMUIdxBit_MPrivNegPri = 1 << 3, 2647 ARMMMUIdxBit_MSUser = 1 << 4, 2648 ARMMMUIdxBit_MSPriv = 1 << 5, 2649 ARMMMUIdxBit_MSUserNegPri = 1 << 6, 2650 ARMMMUIdxBit_MSPrivNegPri = 1 << 7, 2651 } ARMMMUIdxBit; 2652 2653 #define MMU_USER_IDX 0 2654 2655 static inline int arm_to_core_mmu_idx(ARMMMUIdx mmu_idx) 2656 { 2657 return mmu_idx & ARM_MMU_IDX_COREIDX_MASK; 2658 } 2659 2660 static inline ARMMMUIdx core_to_arm_mmu_idx(CPUARMState *env, int mmu_idx) 2661 { 2662 if (arm_feature(env, ARM_FEATURE_M)) { 2663 return mmu_idx | ARM_MMU_IDX_M; 2664 } else { 2665 return mmu_idx | ARM_MMU_IDX_A; 2666 } 2667 } 2668 2669 /* Return the exception level we're running at if this is our mmu_idx */ 2670 static inline int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) 2671 { 2672 switch (mmu_idx & ARM_MMU_IDX_TYPE_MASK) { 2673 case ARM_MMU_IDX_A: 2674 return mmu_idx & 3; 2675 case ARM_MMU_IDX_M: 2676 return mmu_idx & ARM_MMU_IDX_M_PRIV; 2677 default: 2678 g_assert_not_reached(); 2679 } 2680 } 2681 2682 /* Return the MMU index for a v7M CPU in the specified security and 2683 * privilege state 2684 */ 2685 static inline ARMMMUIdx arm_v7m_mmu_idx_for_secstate_and_priv(CPUARMState *env, 2686 bool secstate, 2687 bool priv) 2688 { 2689 ARMMMUIdx mmu_idx = ARM_MMU_IDX_M; 2690 2691 if (priv) { 2692 mmu_idx |= ARM_MMU_IDX_M_PRIV; 2693 } 2694 2695 if (armv7m_nvic_neg_prio_requested(env->nvic, secstate)) { 2696 mmu_idx |= ARM_MMU_IDX_M_NEGPRI; 2697 } 2698 2699 if (secstate) { 2700 mmu_idx |= ARM_MMU_IDX_M_S; 2701 } 2702 2703 return mmu_idx; 2704 } 2705 2706 /* Return the MMU index for a v7M CPU in the specified security state */ 2707 static inline ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, 2708 bool secstate) 2709 { 2710 bool priv = arm_current_el(env) != 0; 2711 2712 return arm_v7m_mmu_idx_for_secstate_and_priv(env, secstate, priv); 2713 } 2714 2715 /* Determine the current mmu_idx to use for normal loads/stores */ 2716 static inline int cpu_mmu_index(CPUARMState *env, bool ifetch) 2717 { 2718 int el = arm_current_el(env); 2719 2720 if (arm_feature(env, ARM_FEATURE_M)) { 2721 ARMMMUIdx mmu_idx = arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); 2722 2723 return arm_to_core_mmu_idx(mmu_idx); 2724 } 2725 2726 if (el < 2 && arm_is_secure_below_el3(env)) { 2727 return arm_to_core_mmu_idx(ARMMMUIdx_S1SE0 + el); 2728 } 2729 return el; 2730 } 2731 2732 /* Indexes used when registering address spaces with cpu_address_space_init */ 2733 typedef enum ARMASIdx { 2734 ARMASIdx_NS = 0, 2735 ARMASIdx_S = 1, 2736 } ARMASIdx; 2737 2738 /* Return the Exception Level targeted by debug exceptions. */ 2739 static inline int arm_debug_target_el(CPUARMState *env) 2740 { 2741 bool secure = arm_is_secure(env); 2742 bool route_to_el2 = false; 2743 2744 if (arm_feature(env, ARM_FEATURE_EL2) && !secure) { 2745 route_to_el2 = env->cp15.hcr_el2 & HCR_TGE || 2746 env->cp15.mdcr_el2 & (1 << 8); 2747 } 2748 2749 if (route_to_el2) { 2750 return 2; 2751 } else if (arm_feature(env, ARM_FEATURE_EL3) && 2752 !arm_el_is_aa64(env, 3) && secure) { 2753 return 3; 2754 } else { 2755 return 1; 2756 } 2757 } 2758 2759 static inline bool arm_v7m_csselr_razwi(ARMCPU *cpu) 2760 { 2761 /* If all the CLIDR.Ctypem bits are 0 there are no caches, and 2762 * CSSELR is RAZ/WI. 2763 */ 2764 return (cpu->clidr & R_V7M_CLIDR_CTYPE_ALL_MASK) != 0; 2765 } 2766 2767 static inline bool aa64_generate_debug_exceptions(CPUARMState *env) 2768 { 2769 if (arm_is_secure(env)) { 2770 /* MDCR_EL3.SDD disables debug events from Secure state */ 2771 if (extract32(env->cp15.mdcr_el3, 16, 1) != 0 2772 || arm_current_el(env) == 3) { 2773 return false; 2774 } 2775 } 2776 2777 if (arm_current_el(env) == arm_debug_target_el(env)) { 2778 if ((extract32(env->cp15.mdscr_el1, 13, 1) == 0) 2779 || (env->daif & PSTATE_D)) { 2780 return false; 2781 } 2782 } 2783 return true; 2784 } 2785 2786 static inline bool aa32_generate_debug_exceptions(CPUARMState *env) 2787 { 2788 int el = arm_current_el(env); 2789 2790 if (el == 0 && arm_el_is_aa64(env, 1)) { 2791 return aa64_generate_debug_exceptions(env); 2792 } 2793 2794 if (arm_is_secure(env)) { 2795 int spd; 2796 2797 if (el == 0 && (env->cp15.sder & 1)) { 2798 /* SDER.SUIDEN means debug exceptions from Secure EL0 2799 * are always enabled. Otherwise they are controlled by 2800 * SDCR.SPD like those from other Secure ELs. 2801 */ 2802 return true; 2803 } 2804 2805 spd = extract32(env->cp15.mdcr_el3, 14, 2); 2806 switch (spd) { 2807 case 1: 2808 /* SPD == 0b01 is reserved, but behaves as 0b00. */ 2809 case 0: 2810 /* For 0b00 we return true if external secure invasive debug 2811 * is enabled. On real hardware this is controlled by external 2812 * signals to the core. QEMU always permits debug, and behaves 2813 * as if DBGEN, SPIDEN, NIDEN and SPNIDEN are all tied high. 2814 */ 2815 return true; 2816 case 2: 2817 return false; 2818 case 3: 2819 return true; 2820 } 2821 } 2822 2823 return el != 2; 2824 } 2825 2826 /* Return true if debugging exceptions are currently enabled. 2827 * This corresponds to what in ARM ARM pseudocode would be 2828 * if UsingAArch32() then 2829 * return AArch32.GenerateDebugExceptions() 2830 * else 2831 * return AArch64.GenerateDebugExceptions() 2832 * We choose to push the if() down into this function for clarity, 2833 * since the pseudocode has it at all callsites except for the one in 2834 * CheckSoftwareStep(), where it is elided because both branches would 2835 * always return the same value. 2836 * 2837 * Parts of the pseudocode relating to EL2 and EL3 are omitted because we 2838 * don't yet implement those exception levels or their associated trap bits. 2839 */ 2840 static inline bool arm_generate_debug_exceptions(CPUARMState *env) 2841 { 2842 if (env->aarch64) { 2843 return aa64_generate_debug_exceptions(env); 2844 } else { 2845 return aa32_generate_debug_exceptions(env); 2846 } 2847 } 2848 2849 /* Is single-stepping active? (Note that the "is EL_D AArch64?" check 2850 * implicitly means this always returns false in pre-v8 CPUs.) 2851 */ 2852 static inline bool arm_singlestep_active(CPUARMState *env) 2853 { 2854 return extract32(env->cp15.mdscr_el1, 0, 1) 2855 && arm_el_is_aa64(env, arm_debug_target_el(env)) 2856 && arm_generate_debug_exceptions(env); 2857 } 2858 2859 static inline bool arm_sctlr_b(CPUARMState *env) 2860 { 2861 return 2862 /* We need not implement SCTLR.ITD in user-mode emulation, so 2863 * let linux-user ignore the fact that it conflicts with SCTLR_B. 2864 * This lets people run BE32 binaries with "-cpu any". 2865 */ 2866 #ifndef CONFIG_USER_ONLY 2867 !arm_feature(env, ARM_FEATURE_V7) && 2868 #endif 2869 (env->cp15.sctlr_el[1] & SCTLR_B) != 0; 2870 } 2871 2872 /* Return true if the processor is in big-endian mode. */ 2873 static inline bool arm_cpu_data_is_big_endian(CPUARMState *env) 2874 { 2875 int cur_el; 2876 2877 /* In 32bit endianness is determined by looking at CPSR's E bit */ 2878 if (!is_a64(env)) { 2879 return 2880 #ifdef CONFIG_USER_ONLY 2881 /* In system mode, BE32 is modelled in line with the 2882 * architecture (as word-invariant big-endianness), where loads 2883 * and stores are done little endian but from addresses which 2884 * are adjusted by XORing with the appropriate constant. So the 2885 * endianness to use for the raw data access is not affected by 2886 * SCTLR.B. 2887 * In user mode, however, we model BE32 as byte-invariant 2888 * big-endianness (because user-only code cannot tell the 2889 * difference), and so we need to use a data access endianness 2890 * that depends on SCTLR.B. 2891 */ 2892 arm_sctlr_b(env) || 2893 #endif 2894 ((env->uncached_cpsr & CPSR_E) ? 1 : 0); 2895 } 2896 2897 cur_el = arm_current_el(env); 2898 2899 if (cur_el == 0) { 2900 return (env->cp15.sctlr_el[1] & SCTLR_E0E) != 0; 2901 } 2902 2903 return (env->cp15.sctlr_el[cur_el] & SCTLR_EE) != 0; 2904 } 2905 2906 #include "exec/cpu-all.h" 2907 2908 /* Bit usage in the TB flags field: bit 31 indicates whether we are 2909 * in 32 or 64 bit mode. The meaning of the other bits depends on that. 2910 * We put flags which are shared between 32 and 64 bit mode at the top 2911 * of the word, and flags which apply to only one mode at the bottom. 2912 */ 2913 #define ARM_TBFLAG_AARCH64_STATE_SHIFT 31 2914 #define ARM_TBFLAG_AARCH64_STATE_MASK (1U << ARM_TBFLAG_AARCH64_STATE_SHIFT) 2915 #define ARM_TBFLAG_MMUIDX_SHIFT 28 2916 #define ARM_TBFLAG_MMUIDX_MASK (0x7 << ARM_TBFLAG_MMUIDX_SHIFT) 2917 #define ARM_TBFLAG_SS_ACTIVE_SHIFT 27 2918 #define ARM_TBFLAG_SS_ACTIVE_MASK (1 << ARM_TBFLAG_SS_ACTIVE_SHIFT) 2919 #define ARM_TBFLAG_PSTATE_SS_SHIFT 26 2920 #define ARM_TBFLAG_PSTATE_SS_MASK (1 << ARM_TBFLAG_PSTATE_SS_SHIFT) 2921 /* Target EL if we take a floating-point-disabled exception */ 2922 #define ARM_TBFLAG_FPEXC_EL_SHIFT 24 2923 #define ARM_TBFLAG_FPEXC_EL_MASK (0x3 << ARM_TBFLAG_FPEXC_EL_SHIFT) 2924 2925 /* Bit usage when in AArch32 state: */ 2926 #define ARM_TBFLAG_THUMB_SHIFT 0 2927 #define ARM_TBFLAG_THUMB_MASK (1 << ARM_TBFLAG_THUMB_SHIFT) 2928 #define ARM_TBFLAG_VECLEN_SHIFT 1 2929 #define ARM_TBFLAG_VECLEN_MASK (0x7 << ARM_TBFLAG_VECLEN_SHIFT) 2930 #define ARM_TBFLAG_VECSTRIDE_SHIFT 4 2931 #define ARM_TBFLAG_VECSTRIDE_MASK (0x3 << ARM_TBFLAG_VECSTRIDE_SHIFT) 2932 #define ARM_TBFLAG_VFPEN_SHIFT 7 2933 #define ARM_TBFLAG_VFPEN_MASK (1 << ARM_TBFLAG_VFPEN_SHIFT) 2934 #define ARM_TBFLAG_CONDEXEC_SHIFT 8 2935 #define ARM_TBFLAG_CONDEXEC_MASK (0xff << ARM_TBFLAG_CONDEXEC_SHIFT) 2936 #define ARM_TBFLAG_SCTLR_B_SHIFT 16 2937 #define ARM_TBFLAG_SCTLR_B_MASK (1 << ARM_TBFLAG_SCTLR_B_SHIFT) 2938 /* We store the bottom two bits of the CPAR as TB flags and handle 2939 * checks on the other bits at runtime 2940 */ 2941 #define ARM_TBFLAG_XSCALE_CPAR_SHIFT 17 2942 #define ARM_TBFLAG_XSCALE_CPAR_MASK (3 << ARM_TBFLAG_XSCALE_CPAR_SHIFT) 2943 /* Indicates whether cp register reads and writes by guest code should access 2944 * the secure or nonsecure bank of banked registers; note that this is not 2945 * the same thing as the current security state of the processor! 2946 */ 2947 #define ARM_TBFLAG_NS_SHIFT 19 2948 #define ARM_TBFLAG_NS_MASK (1 << ARM_TBFLAG_NS_SHIFT) 2949 #define ARM_TBFLAG_BE_DATA_SHIFT 20 2950 #define ARM_TBFLAG_BE_DATA_MASK (1 << ARM_TBFLAG_BE_DATA_SHIFT) 2951 /* For M profile only, Handler (ie not Thread) mode */ 2952 #define ARM_TBFLAG_HANDLER_SHIFT 21 2953 #define ARM_TBFLAG_HANDLER_MASK (1 << ARM_TBFLAG_HANDLER_SHIFT) 2954 /* For M profile only, whether we should generate stack-limit checks */ 2955 #define ARM_TBFLAG_STACKCHECK_SHIFT 22 2956 #define ARM_TBFLAG_STACKCHECK_MASK (1 << ARM_TBFLAG_STACKCHECK_SHIFT) 2957 2958 /* Bit usage when in AArch64 state */ 2959 #define ARM_TBFLAG_TBI0_SHIFT 0 /* TBI0 for EL0/1 or TBI for EL2/3 */ 2960 #define ARM_TBFLAG_TBI0_MASK (0x1ull << ARM_TBFLAG_TBI0_SHIFT) 2961 #define ARM_TBFLAG_TBI1_SHIFT 1 /* TBI1 for EL0/1 */ 2962 #define ARM_TBFLAG_TBI1_MASK (0x1ull << ARM_TBFLAG_TBI1_SHIFT) 2963 #define ARM_TBFLAG_SVEEXC_EL_SHIFT 2 2964 #define ARM_TBFLAG_SVEEXC_EL_MASK (0x3 << ARM_TBFLAG_SVEEXC_EL_SHIFT) 2965 #define ARM_TBFLAG_ZCR_LEN_SHIFT 4 2966 #define ARM_TBFLAG_ZCR_LEN_MASK (0xf << ARM_TBFLAG_ZCR_LEN_SHIFT) 2967 2968 /* some convenience accessor macros */ 2969 #define ARM_TBFLAG_AARCH64_STATE(F) \ 2970 (((F) & ARM_TBFLAG_AARCH64_STATE_MASK) >> ARM_TBFLAG_AARCH64_STATE_SHIFT) 2971 #define ARM_TBFLAG_MMUIDX(F) \ 2972 (((F) & ARM_TBFLAG_MMUIDX_MASK) >> ARM_TBFLAG_MMUIDX_SHIFT) 2973 #define ARM_TBFLAG_SS_ACTIVE(F) \ 2974 (((F) & ARM_TBFLAG_SS_ACTIVE_MASK) >> ARM_TBFLAG_SS_ACTIVE_SHIFT) 2975 #define ARM_TBFLAG_PSTATE_SS(F) \ 2976 (((F) & ARM_TBFLAG_PSTATE_SS_MASK) >> ARM_TBFLAG_PSTATE_SS_SHIFT) 2977 #define ARM_TBFLAG_FPEXC_EL(F) \ 2978 (((F) & ARM_TBFLAG_FPEXC_EL_MASK) >> ARM_TBFLAG_FPEXC_EL_SHIFT) 2979 #define ARM_TBFLAG_THUMB(F) \ 2980 (((F) & ARM_TBFLAG_THUMB_MASK) >> ARM_TBFLAG_THUMB_SHIFT) 2981 #define ARM_TBFLAG_VECLEN(F) \ 2982 (((F) & ARM_TBFLAG_VECLEN_MASK) >> ARM_TBFLAG_VECLEN_SHIFT) 2983 #define ARM_TBFLAG_VECSTRIDE(F) \ 2984 (((F) & ARM_TBFLAG_VECSTRIDE_MASK) >> ARM_TBFLAG_VECSTRIDE_SHIFT) 2985 #define ARM_TBFLAG_VFPEN(F) \ 2986 (((F) & ARM_TBFLAG_VFPEN_MASK) >> ARM_TBFLAG_VFPEN_SHIFT) 2987 #define ARM_TBFLAG_CONDEXEC(F) \ 2988 (((F) & ARM_TBFLAG_CONDEXEC_MASK) >> ARM_TBFLAG_CONDEXEC_SHIFT) 2989 #define ARM_TBFLAG_SCTLR_B(F) \ 2990 (((F) & ARM_TBFLAG_SCTLR_B_MASK) >> ARM_TBFLAG_SCTLR_B_SHIFT) 2991 #define ARM_TBFLAG_XSCALE_CPAR(F) \ 2992 (((F) & ARM_TBFLAG_XSCALE_CPAR_MASK) >> ARM_TBFLAG_XSCALE_CPAR_SHIFT) 2993 #define ARM_TBFLAG_NS(F) \ 2994 (((F) & ARM_TBFLAG_NS_MASK) >> ARM_TBFLAG_NS_SHIFT) 2995 #define ARM_TBFLAG_BE_DATA(F) \ 2996 (((F) & ARM_TBFLAG_BE_DATA_MASK) >> ARM_TBFLAG_BE_DATA_SHIFT) 2997 #define ARM_TBFLAG_HANDLER(F) \ 2998 (((F) & ARM_TBFLAG_HANDLER_MASK) >> ARM_TBFLAG_HANDLER_SHIFT) 2999 #define ARM_TBFLAG_STACKCHECK(F) \ 3000 (((F) & ARM_TBFLAG_STACKCHECK_MASK) >> ARM_TBFLAG_STACKCHECK_SHIFT) 3001 #define ARM_TBFLAG_TBI0(F) \ 3002 (((F) & ARM_TBFLAG_TBI0_MASK) >> ARM_TBFLAG_TBI0_SHIFT) 3003 #define ARM_TBFLAG_TBI1(F) \ 3004 (((F) & ARM_TBFLAG_TBI1_MASK) >> ARM_TBFLAG_TBI1_SHIFT) 3005 #define ARM_TBFLAG_SVEEXC_EL(F) \ 3006 (((F) & ARM_TBFLAG_SVEEXC_EL_MASK) >> ARM_TBFLAG_SVEEXC_EL_SHIFT) 3007 #define ARM_TBFLAG_ZCR_LEN(F) \ 3008 (((F) & ARM_TBFLAG_ZCR_LEN_MASK) >> ARM_TBFLAG_ZCR_LEN_SHIFT) 3009 3010 static inline bool bswap_code(bool sctlr_b) 3011 { 3012 #ifdef CONFIG_USER_ONLY 3013 /* BE8 (SCTLR.B = 0, TARGET_WORDS_BIGENDIAN = 1) is mixed endian. 3014 * The invalid combination SCTLR.B=1/CPSR.E=1/TARGET_WORDS_BIGENDIAN=0 3015 * would also end up as a mixed-endian mode with BE code, LE data. 3016 */ 3017 return 3018 #ifdef TARGET_WORDS_BIGENDIAN 3019 1 ^ 3020 #endif 3021 sctlr_b; 3022 #else 3023 /* All code access in ARM is little endian, and there are no loaders 3024 * doing swaps that need to be reversed 3025 */ 3026 return 0; 3027 #endif 3028 } 3029 3030 #ifdef CONFIG_USER_ONLY 3031 static inline bool arm_cpu_bswap_data(CPUARMState *env) 3032 { 3033 return 3034 #ifdef TARGET_WORDS_BIGENDIAN 3035 1 ^ 3036 #endif 3037 arm_cpu_data_is_big_endian(env); 3038 } 3039 #endif 3040 3041 #ifndef CONFIG_USER_ONLY 3042 /** 3043 * arm_regime_tbi0: 3044 * @env: CPUARMState 3045 * @mmu_idx: MMU index indicating required translation regime 3046 * 3047 * Extracts the TBI0 value from the appropriate TCR for the current EL 3048 * 3049 * Returns: the TBI0 value. 3050 */ 3051 uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx); 3052 3053 /** 3054 * arm_regime_tbi1: 3055 * @env: CPUARMState 3056 * @mmu_idx: MMU index indicating required translation regime 3057 * 3058 * Extracts the TBI1 value from the appropriate TCR for the current EL 3059 * 3060 * Returns: the TBI1 value. 3061 */ 3062 uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx); 3063 #else 3064 /* We can't handle tagged addresses properly in user-only mode */ 3065 static inline uint32_t arm_regime_tbi0(CPUARMState *env, ARMMMUIdx mmu_idx) 3066 { 3067 return 0; 3068 } 3069 3070 static inline uint32_t arm_regime_tbi1(CPUARMState *env, ARMMMUIdx mmu_idx) 3071 { 3072 return 0; 3073 } 3074 #endif 3075 3076 void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, 3077 target_ulong *cs_base, uint32_t *flags); 3078 3079 enum { 3080 QEMU_PSCI_CONDUIT_DISABLED = 0, 3081 QEMU_PSCI_CONDUIT_SMC = 1, 3082 QEMU_PSCI_CONDUIT_HVC = 2, 3083 }; 3084 3085 #ifndef CONFIG_USER_ONLY 3086 /* Return the address space index to use for a memory access */ 3087 static inline int arm_asidx_from_attrs(CPUState *cs, MemTxAttrs attrs) 3088 { 3089 return attrs.secure ? ARMASIdx_S : ARMASIdx_NS; 3090 } 3091 3092 /* Return the AddressSpace to use for a memory access 3093 * (which depends on whether the access is S or NS, and whether 3094 * the board gave us a separate AddressSpace for S accesses). 3095 */ 3096 static inline AddressSpace *arm_addressspace(CPUState *cs, MemTxAttrs attrs) 3097 { 3098 return cpu_get_address_space(cs, arm_asidx_from_attrs(cs, attrs)); 3099 } 3100 #endif 3101 3102 /** 3103 * arm_register_pre_el_change_hook: 3104 * Register a hook function which will be called immediately before this 3105 * CPU changes exception level or mode. The hook function will be 3106 * passed a pointer to the ARMCPU and the opaque data pointer passed 3107 * to this function when the hook was registered. 3108 * 3109 * Note that if a pre-change hook is called, any registered post-change hooks 3110 * are guaranteed to subsequently be called. 3111 */ 3112 void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, 3113 void *opaque); 3114 /** 3115 * arm_register_el_change_hook: 3116 * Register a hook function which will be called immediately after this 3117 * CPU changes exception level or mode. The hook function will be 3118 * passed a pointer to the ARMCPU and the opaque data pointer passed 3119 * to this function when the hook was registered. 3120 * 3121 * Note that any registered hooks registered here are guaranteed to be called 3122 * if pre-change hooks have been. 3123 */ 3124 void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, void 3125 *opaque); 3126 3127 /** 3128 * aa32_vfp_dreg: 3129 * Return a pointer to the Dn register within env in 32-bit mode. 3130 */ 3131 static inline uint64_t *aa32_vfp_dreg(CPUARMState *env, unsigned regno) 3132 { 3133 return &env->vfp.zregs[regno >> 1].d[regno & 1]; 3134 } 3135 3136 /** 3137 * aa32_vfp_qreg: 3138 * Return a pointer to the Qn register within env in 32-bit mode. 3139 */ 3140 static inline uint64_t *aa32_vfp_qreg(CPUARMState *env, unsigned regno) 3141 { 3142 return &env->vfp.zregs[regno].d[0]; 3143 } 3144 3145 /** 3146 * aa64_vfp_qreg: 3147 * Return a pointer to the Qn register within env in 64-bit mode. 3148 */ 3149 static inline uint64_t *aa64_vfp_qreg(CPUARMState *env, unsigned regno) 3150 { 3151 return &env->vfp.zregs[regno].d[0]; 3152 } 3153 3154 /* Shared between translate-sve.c and sve_helper.c. */ 3155 extern const uint64_t pred_esz_masks[4]; 3156 3157 /* 3158 * 32-bit feature tests via id registers. 3159 */ 3160 static inline bool isar_feature_thumb_div(const ARMISARegisters *id) 3161 { 3162 return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) != 0; 3163 } 3164 3165 static inline bool isar_feature_arm_div(const ARMISARegisters *id) 3166 { 3167 return FIELD_EX32(id->id_isar0, ID_ISAR0, DIVIDE) > 1; 3168 } 3169 3170 static inline bool isar_feature_jazelle(const ARMISARegisters *id) 3171 { 3172 return FIELD_EX32(id->id_isar1, ID_ISAR1, JAZELLE) != 0; 3173 } 3174 3175 static inline bool isar_feature_aa32_aes(const ARMISARegisters *id) 3176 { 3177 return FIELD_EX32(id->id_isar5, ID_ISAR5, AES) != 0; 3178 } 3179 3180 static inline bool isar_feature_aa32_pmull(const ARMISARegisters *id) 3181 { 3182 return FIELD_EX32(id->id_isar5, ID_ISAR5, AES) > 1; 3183 } 3184 3185 static inline bool isar_feature_aa32_sha1(const ARMISARegisters *id) 3186 { 3187 return FIELD_EX32(id->id_isar5, ID_ISAR5, SHA1) != 0; 3188 } 3189 3190 static inline bool isar_feature_aa32_sha2(const ARMISARegisters *id) 3191 { 3192 return FIELD_EX32(id->id_isar5, ID_ISAR5, SHA2) != 0; 3193 } 3194 3195 static inline bool isar_feature_aa32_crc32(const ARMISARegisters *id) 3196 { 3197 return FIELD_EX32(id->id_isar5, ID_ISAR5, CRC32) != 0; 3198 } 3199 3200 static inline bool isar_feature_aa32_rdm(const ARMISARegisters *id) 3201 { 3202 return FIELD_EX32(id->id_isar5, ID_ISAR5, RDM) != 0; 3203 } 3204 3205 static inline bool isar_feature_aa32_vcma(const ARMISARegisters *id) 3206 { 3207 return FIELD_EX32(id->id_isar5, ID_ISAR5, VCMA) != 0; 3208 } 3209 3210 static inline bool isar_feature_aa32_dp(const ARMISARegisters *id) 3211 { 3212 return FIELD_EX32(id->id_isar6, ID_ISAR6, DP) != 0; 3213 } 3214 3215 static inline bool isar_feature_aa32_fp16_arith(const ARMISARegisters *id) 3216 { 3217 /* 3218 * This is a placeholder for use by VCMA until the rest of 3219 * the ARMv8.2-FP16 extension is implemented for aa32 mode. 3220 * At which point we can properly set and check MVFR1.FPHP. 3221 */ 3222 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) == 1; 3223 } 3224 3225 /* 3226 * 64-bit feature tests via id registers. 3227 */ 3228 static inline bool isar_feature_aa64_aes(const ARMISARegisters *id) 3229 { 3230 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, AES) != 0; 3231 } 3232 3233 static inline bool isar_feature_aa64_pmull(const ARMISARegisters *id) 3234 { 3235 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, AES) > 1; 3236 } 3237 3238 static inline bool isar_feature_aa64_sha1(const ARMISARegisters *id) 3239 { 3240 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA1) != 0; 3241 } 3242 3243 static inline bool isar_feature_aa64_sha256(const ARMISARegisters *id) 3244 { 3245 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA2) != 0; 3246 } 3247 3248 static inline bool isar_feature_aa64_sha512(const ARMISARegisters *id) 3249 { 3250 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA2) > 1; 3251 } 3252 3253 static inline bool isar_feature_aa64_crc32(const ARMISARegisters *id) 3254 { 3255 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, CRC32) != 0; 3256 } 3257 3258 static inline bool isar_feature_aa64_atomics(const ARMISARegisters *id) 3259 { 3260 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, ATOMIC) != 0; 3261 } 3262 3263 static inline bool isar_feature_aa64_rdm(const ARMISARegisters *id) 3264 { 3265 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, RDM) != 0; 3266 } 3267 3268 static inline bool isar_feature_aa64_sha3(const ARMISARegisters *id) 3269 { 3270 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SHA3) != 0; 3271 } 3272 3273 static inline bool isar_feature_aa64_sm3(const ARMISARegisters *id) 3274 { 3275 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SM3) != 0; 3276 } 3277 3278 static inline bool isar_feature_aa64_sm4(const ARMISARegisters *id) 3279 { 3280 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, SM4) != 0; 3281 } 3282 3283 static inline bool isar_feature_aa64_dp(const ARMISARegisters *id) 3284 { 3285 return FIELD_EX64(id->id_aa64isar0, ID_AA64ISAR0, DP) != 0; 3286 } 3287 3288 static inline bool isar_feature_aa64_fcma(const ARMISARegisters *id) 3289 { 3290 return FIELD_EX64(id->id_aa64isar1, ID_AA64ISAR1, FCMA) != 0; 3291 } 3292 3293 static inline bool isar_feature_aa64_fp16(const ARMISARegisters *id) 3294 { 3295 /* We always set the AdvSIMD and FP fields identically wrt FP16. */ 3296 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, FP) == 1; 3297 } 3298 3299 static inline bool isar_feature_aa64_sve(const ARMISARegisters *id) 3300 { 3301 return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, SVE) != 0; 3302 } 3303 3304 /* 3305 * Forward to the above feature tests given an ARMCPU pointer. 3306 */ 3307 #define cpu_isar_feature(name, cpu) \ 3308 ({ ARMCPU *cpu_ = (cpu); isar_feature_##name(&cpu_->isar); }) 3309 3310 #endif 3311