1 /* 2 * Simple interface for atomic operations. 3 * 4 * Copyright (C) 2013 Red Hat, Inc. 5 * 6 * Author: Paolo Bonzini <pbonzini@redhat.com> 7 * 8 * This work is licensed under the terms of the GNU GPL, version 2 or later. 9 * See the COPYING file in the top-level directory. 10 * 11 * See docs/devel/atomics.rst for discussion about the guarantees each 12 * atomic primitive is meant to provide. 13 */ 14 15 #ifndef QEMU_ATOMIC_H 16 #define QEMU_ATOMIC_H 17 18 #include "compiler.h" 19 20 /* Compiler barrier */ 21 #define barrier() ({ asm volatile("" ::: "memory"); (void)0; }) 22 23 #ifndef __ATOMIC_RELAXED 24 #error "Expecting C11 atomic ops" 25 #endif 26 27 /* Manual memory barriers 28 * 29 *__atomic_thread_fence does not include a compiler barrier; instead, 30 * the barrier is part of __atomic_load/__atomic_store's "volatile-like" 31 * semantics. If smp_wmb() is a no-op, absence of the barrier means that 32 * the compiler is free to reorder stores on each side of the barrier. 33 * Add one here, and similarly in smp_rmb() and smp_read_barrier_depends(). 34 */ 35 36 #define smp_mb() ({ barrier(); __atomic_thread_fence(__ATOMIC_SEQ_CST); }) 37 #define smp_mb_release() ({ barrier(); __atomic_thread_fence(__ATOMIC_RELEASE); }) 38 #define smp_mb_acquire() ({ barrier(); __atomic_thread_fence(__ATOMIC_ACQUIRE); }) 39 40 /* Most compilers currently treat consume and acquire the same, but really 41 * no processors except Alpha need a barrier here. Leave it in if 42 * using Thread Sanitizer to avoid warnings, otherwise optimize it away. 43 */ 44 #ifdef QEMU_SANITIZE_THREAD 45 #define smp_read_barrier_depends() ({ barrier(); __atomic_thread_fence(__ATOMIC_CONSUME); }) 46 #elif defined(__alpha__) 47 #define smp_read_barrier_depends() asm volatile("mb":::"memory") 48 #else 49 #define smp_read_barrier_depends() barrier() 50 #endif 51 52 /* 53 * A signal barrier forces all pending local memory ops to be observed before 54 * a SIGSEGV is delivered to the *same* thread. In practice this is exactly 55 * the same as barrier(), but since we have the correct builtin, use it. 56 */ 57 #define signal_barrier() __atomic_signal_fence(__ATOMIC_SEQ_CST) 58 59 /* Sanity check that the size of an atomic operation isn't "overly large". 60 * Despite the fact that e.g. i686 has 64-bit atomic operations, we do not 61 * want to use them because we ought not need them, and this lets us do a 62 * bit of sanity checking that other 32-bit hosts might build. 63 * 64 * That said, we have a problem on 64-bit ILP32 hosts in that in order to 65 * sync with TCG_OVERSIZED_GUEST, this must match TCG_TARGET_REG_BITS. 66 * We'd prefer not want to pull in everything else TCG related, so handle 67 * those few cases by hand. 68 * 69 * Note that x32 is fully detected with __x86_64__ + _ILP32, and that for 70 * Sparc we always force the use of sparcv9 in configure. MIPS n32 (ILP32) & 71 * n64 (LP64) ABIs are both detected using __mips64. 72 */ 73 #if defined(__x86_64__) || defined(__sparc__) || defined(__mips64) 74 # define ATOMIC_REG_SIZE 8 75 #else 76 # define ATOMIC_REG_SIZE sizeof(void *) 77 #endif 78 79 /* Weak atomic operations prevent the compiler moving other 80 * loads/stores past the atomic operation load/store. However there is 81 * no explicit memory barrier for the processor. 82 * 83 * The C11 memory model says that variables that are accessed from 84 * different threads should at least be done with __ATOMIC_RELAXED 85 * primitives or the result is undefined. Generally this has little to 86 * no effect on the generated code but not using the atomic primitives 87 * will get flagged by sanitizers as a violation. 88 */ 89 #define qatomic_read__nocheck(ptr) \ 90 __atomic_load_n(ptr, __ATOMIC_RELAXED) 91 92 #define qatomic_read(ptr) \ 93 ({ \ 94 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 95 qatomic_read__nocheck(ptr); \ 96 }) 97 98 #define qatomic_set__nocheck(ptr, i) \ 99 __atomic_store_n(ptr, i, __ATOMIC_RELAXED) 100 101 #define qatomic_set(ptr, i) do { \ 102 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 103 qatomic_set__nocheck(ptr, i); \ 104 } while(0) 105 106 /* See above: most compilers currently treat consume and acquire the 107 * same, but this slows down qatomic_rcu_read unnecessarily. 108 */ 109 #ifdef QEMU_SANITIZE_THREAD 110 #define qatomic_rcu_read__nocheck(ptr, valptr) \ 111 __atomic_load(ptr, valptr, __ATOMIC_CONSUME); 112 #else 113 #define qatomic_rcu_read__nocheck(ptr, valptr) \ 114 __atomic_load(ptr, valptr, __ATOMIC_RELAXED); \ 115 smp_read_barrier_depends(); 116 #endif 117 118 /* 119 * Preprocessor sorcery ahead: use a different identifier for the 120 * local variable in each expansion, so we can nest macro calls 121 * without shadowing variables. 122 */ 123 #define qatomic_rcu_read_internal(ptr, _val) \ 124 ({ \ 125 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 126 typeof_strip_qual(*ptr) _val; \ 127 qatomic_rcu_read__nocheck(ptr, &_val); \ 128 _val; \ 129 }) 130 #define qatomic_rcu_read(ptr) \ 131 qatomic_rcu_read_internal((ptr), MAKE_IDENTIFIER(_val)) 132 133 #define qatomic_rcu_set(ptr, i) do { \ 134 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 135 __atomic_store_n(ptr, i, __ATOMIC_RELEASE); \ 136 } while(0) 137 138 #define qatomic_load_acquire(ptr) \ 139 ({ \ 140 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 141 typeof_strip_qual(*ptr) _val; \ 142 __atomic_load(ptr, &_val, __ATOMIC_ACQUIRE); \ 143 _val; \ 144 }) 145 146 #define qatomic_store_release(ptr, i) do { \ 147 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 148 __atomic_store_n(ptr, i, __ATOMIC_RELEASE); \ 149 } while(0) 150 151 152 /* All the remaining operations are fully sequentially consistent */ 153 154 #define qatomic_xchg__nocheck(ptr, i) ({ \ 155 __atomic_exchange_n(ptr, (i), __ATOMIC_SEQ_CST); \ 156 }) 157 158 #define qatomic_xchg(ptr, i) ({ \ 159 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 160 qatomic_xchg__nocheck(ptr, i); \ 161 }) 162 163 /* Returns the old value of '*ptr' (whether the cmpxchg failed or not) */ 164 #define qatomic_cmpxchg__nocheck(ptr, old, new) ({ \ 165 typeof_strip_qual(*ptr) _old = (old); \ 166 (void)__atomic_compare_exchange_n(ptr, &_old, new, false, \ 167 __ATOMIC_SEQ_CST, __ATOMIC_SEQ_CST); \ 168 _old; \ 169 }) 170 171 #define qatomic_cmpxchg(ptr, old, new) ({ \ 172 qemu_build_assert(sizeof(*ptr) <= ATOMIC_REG_SIZE); \ 173 qatomic_cmpxchg__nocheck(ptr, old, new); \ 174 }) 175 176 /* Provide shorter names for GCC atomic builtins, return old value */ 177 #define qatomic_fetch_inc(ptr) __atomic_fetch_add(ptr, 1, __ATOMIC_SEQ_CST) 178 #define qatomic_fetch_dec(ptr) __atomic_fetch_sub(ptr, 1, __ATOMIC_SEQ_CST) 179 180 #define qatomic_fetch_add(ptr, n) __atomic_fetch_add(ptr, n, __ATOMIC_SEQ_CST) 181 #define qatomic_fetch_sub(ptr, n) __atomic_fetch_sub(ptr, n, __ATOMIC_SEQ_CST) 182 #define qatomic_fetch_and(ptr, n) __atomic_fetch_and(ptr, n, __ATOMIC_SEQ_CST) 183 #define qatomic_fetch_or(ptr, n) __atomic_fetch_or(ptr, n, __ATOMIC_SEQ_CST) 184 #define qatomic_fetch_xor(ptr, n) __atomic_fetch_xor(ptr, n, __ATOMIC_SEQ_CST) 185 186 #define qatomic_inc_fetch(ptr) __atomic_add_fetch(ptr, 1, __ATOMIC_SEQ_CST) 187 #define qatomic_dec_fetch(ptr) __atomic_sub_fetch(ptr, 1, __ATOMIC_SEQ_CST) 188 #define qatomic_add_fetch(ptr, n) __atomic_add_fetch(ptr, n, __ATOMIC_SEQ_CST) 189 #define qatomic_sub_fetch(ptr, n) __atomic_sub_fetch(ptr, n, __ATOMIC_SEQ_CST) 190 #define qatomic_and_fetch(ptr, n) __atomic_and_fetch(ptr, n, __ATOMIC_SEQ_CST) 191 #define qatomic_or_fetch(ptr, n) __atomic_or_fetch(ptr, n, __ATOMIC_SEQ_CST) 192 #define qatomic_xor_fetch(ptr, n) __atomic_xor_fetch(ptr, n, __ATOMIC_SEQ_CST) 193 194 /* And even shorter names that return void. */ 195 #define qatomic_inc(ptr) \ 196 ((void) __atomic_fetch_add(ptr, 1, __ATOMIC_SEQ_CST)) 197 #define qatomic_dec(ptr) \ 198 ((void) __atomic_fetch_sub(ptr, 1, __ATOMIC_SEQ_CST)) 199 #define qatomic_add(ptr, n) \ 200 ((void) __atomic_fetch_add(ptr, n, __ATOMIC_SEQ_CST)) 201 #define qatomic_sub(ptr, n) \ 202 ((void) __atomic_fetch_sub(ptr, n, __ATOMIC_SEQ_CST)) 203 #define qatomic_and(ptr, n) \ 204 ((void) __atomic_fetch_and(ptr, n, __ATOMIC_SEQ_CST)) 205 #define qatomic_or(ptr, n) \ 206 ((void) __atomic_fetch_or(ptr, n, __ATOMIC_SEQ_CST)) 207 #define qatomic_xor(ptr, n) \ 208 ((void) __atomic_fetch_xor(ptr, n, __ATOMIC_SEQ_CST)) 209 210 #define smp_wmb() smp_mb_release() 211 #define smp_rmb() smp_mb_acquire() 212 213 /* 214 * SEQ_CST is weaker than the older __sync_* builtins and Linux 215 * kernel read-modify-write atomics. Provide a macro to obtain 216 * the same semantics. 217 */ 218 #if !defined(QEMU_SANITIZE_THREAD) && \ 219 (defined(__i386__) || defined(__x86_64__) || defined(__s390x__)) 220 # define smp_mb__before_rmw() signal_barrier() 221 # define smp_mb__after_rmw() signal_barrier() 222 #else 223 # define smp_mb__before_rmw() smp_mb() 224 # define smp_mb__after_rmw() smp_mb() 225 #endif 226 227 /* 228 * On some architectures, qatomic_set_mb is more efficient than a store 229 * plus a fence. 230 */ 231 232 #if !defined(QEMU_SANITIZE_THREAD) && \ 233 (defined(__i386__) || defined(__x86_64__) || defined(__s390x__)) 234 # define qatomic_set_mb(ptr, i) \ 235 ({ (void)qatomic_xchg(ptr, i); smp_mb__after_rmw(); }) 236 #else 237 # define qatomic_set_mb(ptr, i) \ 238 ({ qatomic_store_release(ptr, i); smp_mb(); }) 239 #endif 240 241 #define qatomic_fetch_inc_nonzero(ptr) ({ \ 242 typeof_strip_qual(*ptr) _oldn = qatomic_read(ptr); \ 243 while (_oldn && qatomic_cmpxchg(ptr, _oldn, _oldn + 1) != _oldn) { \ 244 _oldn = qatomic_read(ptr); \ 245 } \ 246 _oldn; \ 247 }) 248 249 /* 250 * Abstractions to access atomically (i.e. "once") i64/u64 variables. 251 * 252 * The i386 abi is odd in that by default members are only aligned to 253 * 4 bytes, which means that 8-byte types can wind up mis-aligned. 254 * Clang will then warn about this, and emit a call into libatomic. 255 * 256 * Use of these types in structures when they will be used with atomic 257 * operations can avoid this. 258 */ 259 typedef int64_t aligned_int64_t __attribute__((aligned(8))); 260 typedef uint64_t aligned_uint64_t __attribute__((aligned(8))); 261 262 #ifdef CONFIG_ATOMIC64 263 /* Use __nocheck because sizeof(void *) might be < sizeof(u64) */ 264 #define qatomic_read_i64(P) \ 265 _Generic(*(P), int64_t: qatomic_read__nocheck(P)) 266 #define qatomic_read_u64(P) \ 267 _Generic(*(P), uint64_t: qatomic_read__nocheck(P)) 268 #define qatomic_set_i64(P, V) \ 269 _Generic(*(P), int64_t: qatomic_set__nocheck(P, V)) 270 #define qatomic_set_u64(P, V) \ 271 _Generic(*(P), uint64_t: qatomic_set__nocheck(P, V)) 272 273 static inline void qatomic64_init(void) 274 { 275 } 276 #else /* !CONFIG_ATOMIC64 */ 277 int64_t qatomic_read_i64(const int64_t *ptr); 278 uint64_t qatomic_read_u64(const uint64_t *ptr); 279 void qatomic_set_i64(int64_t *ptr, int64_t val); 280 void qatomic_set_u64(uint64_t *ptr, uint64_t val); 281 void qatomic64_init(void); 282 #endif /* !CONFIG_ATOMIC64 */ 283 284 #endif /* QEMU_ATOMIC_H */ 285