1 /* 2 * QEMU Guest Agent 3 * 4 * Copyright IBM Corp. 2011 5 * 6 * Authors: 7 * Adam Litke <aglitke@linux.vnet.ibm.com> 8 * Michael Roth <mdroth@linux.vnet.ibm.com> 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2 or later. 11 * See the COPYING file in the top-level directory. 12 */ 13 #include <stdlib.h> 14 #include <stdio.h> 15 #include <stdbool.h> 16 #include <glib.h> 17 #include <getopt.h> 18 #include <glib/gstdio.h> 19 #ifndef _WIN32 20 #include <syslog.h> 21 #include <sys/wait.h> 22 #include <sys/stat.h> 23 #endif 24 #include "qapi/qmp/json-streamer.h" 25 #include "qapi/qmp/json-parser.h" 26 #include "qapi/qmp/qint.h" 27 #include "qapi/qmp/qjson.h" 28 #include "qga/guest-agent-core.h" 29 #include "qemu/module.h" 30 #include "signal.h" 31 #include "qapi/qmp/qerror.h" 32 #include "qapi/qmp/dispatch.h" 33 #include "qga/channel.h" 34 #include "qemu/bswap.h" 35 #ifdef _WIN32 36 #include "qga/service-win32.h" 37 #include "qga/vss-win32.h" 38 #include <windows.h> 39 #endif 40 #ifdef __linux__ 41 #include <linux/fs.h> 42 #ifdef FIFREEZE 43 #define CONFIG_FSFREEZE 44 #endif 45 #endif 46 47 #ifndef _WIN32 48 #define QGA_VIRTIO_PATH_DEFAULT "/dev/virtio-ports/org.qemu.guest_agent.0" 49 #define QGA_STATE_RELATIVE_DIR "run" 50 #else 51 #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" 52 #define QGA_STATE_RELATIVE_DIR "qemu-ga" 53 #endif 54 #ifdef CONFIG_FSFREEZE 55 #define QGA_FSFREEZE_HOOK_DEFAULT CONFIG_QEMU_CONFDIR "/fsfreeze-hook" 56 #endif 57 #define QGA_SENTINEL_BYTE 0xFF 58 59 static struct { 60 const char *state_dir; 61 const char *pidfile; 62 } dfl_pathnames; 63 64 typedef struct GAPersistentState { 65 #define QGA_PSTATE_DEFAULT_FD_COUNTER 1000 66 int64_t fd_counter; 67 } GAPersistentState; 68 69 struct GAState { 70 JSONMessageParser parser; 71 GMainLoop *main_loop; 72 GAChannel *channel; 73 bool virtio; /* fastpath to check for virtio to deal with poll() quirks */ 74 GACommandState *command_state; 75 GLogLevelFlags log_level; 76 FILE *log_file; 77 bool logging_enabled; 78 #ifdef _WIN32 79 GAService service; 80 #endif 81 bool delimit_response; 82 bool frozen; 83 GList *blacklist; 84 const char *state_filepath_isfrozen; 85 struct { 86 const char *log_filepath; 87 const char *pid_filepath; 88 } deferred_options; 89 #ifdef CONFIG_FSFREEZE 90 const char *fsfreeze_hook; 91 #endif 92 const gchar *pstate_filepath; 93 GAPersistentState pstate; 94 }; 95 96 struct GAState *ga_state; 97 98 /* commands that are safe to issue while filesystems are frozen */ 99 static const char *ga_freeze_whitelist[] = { 100 "guest-ping", 101 "guest-info", 102 "guest-sync", 103 "guest-sync-delimited", 104 "guest-fsfreeze-status", 105 "guest-fsfreeze-thaw", 106 NULL 107 }; 108 109 #ifdef _WIN32 110 DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data, 111 LPVOID ctx); 112 VOID WINAPI service_main(DWORD argc, TCHAR *argv[]); 113 #endif 114 115 static void 116 init_dfl_pathnames(void) 117 { 118 g_assert(dfl_pathnames.state_dir == NULL); 119 g_assert(dfl_pathnames.pidfile == NULL); 120 dfl_pathnames.state_dir = qemu_get_local_state_pathname( 121 QGA_STATE_RELATIVE_DIR); 122 dfl_pathnames.pidfile = qemu_get_local_state_pathname( 123 QGA_STATE_RELATIVE_DIR G_DIR_SEPARATOR_S "qemu-ga.pid"); 124 } 125 126 static void quit_handler(int sig) 127 { 128 /* if we're frozen, don't exit unless we're absolutely forced to, 129 * because it's basically impossible for graceful exit to complete 130 * unless all log/pid files are on unfreezable filesystems. there's 131 * also a very likely chance killing the agent before unfreezing 132 * the filesystems is a mistake (or will be viewed as one later). 133 */ 134 if (ga_is_frozen(ga_state)) { 135 return; 136 } 137 g_debug("received signal num %d, quitting", sig); 138 139 if (g_main_loop_is_running(ga_state->main_loop)) { 140 g_main_loop_quit(ga_state->main_loop); 141 } 142 } 143 144 #ifndef _WIN32 145 static gboolean register_signal_handlers(void) 146 { 147 struct sigaction sigact; 148 int ret; 149 150 memset(&sigact, 0, sizeof(struct sigaction)); 151 sigact.sa_handler = quit_handler; 152 153 ret = sigaction(SIGINT, &sigact, NULL); 154 if (ret == -1) { 155 g_error("error configuring signal handler: %s", strerror(errno)); 156 } 157 ret = sigaction(SIGTERM, &sigact, NULL); 158 if (ret == -1) { 159 g_error("error configuring signal handler: %s", strerror(errno)); 160 } 161 162 return true; 163 } 164 165 /* TODO: use this in place of all post-fork() fclose(std*) callers */ 166 void reopen_fd_to_null(int fd) 167 { 168 int nullfd; 169 170 nullfd = open("/dev/null", O_RDWR); 171 if (nullfd < 0) { 172 return; 173 } 174 175 dup2(nullfd, fd); 176 177 if (nullfd != fd) { 178 close(nullfd); 179 } 180 } 181 #endif 182 183 static void usage(const char *cmd) 184 { 185 printf( 186 "Usage: %s [-m <method> -p <path>] [<options>]\n" 187 "QEMU Guest Agent %s\n" 188 "\n" 189 " -m, --method transport method: one of unix-listen, virtio-serial, or\n" 190 " isa-serial (virtio-serial is the default)\n" 191 " -p, --path device/socket path (the default for virtio-serial is:\n" 192 " %s)\n" 193 " -l, --logfile set logfile path, logs to stderr by default\n" 194 " -f, --pidfile specify pidfile (default is %s)\n" 195 #ifdef CONFIG_FSFREEZE 196 " -F, --fsfreeze-hook\n" 197 " enable fsfreeze hook. Accepts an optional argument that\n" 198 " specifies script to run on freeze/thaw. Script will be\n" 199 " called with 'freeze'/'thaw' arguments accordingly.\n" 200 " (default is %s)\n" 201 " If using -F with an argument, do not follow -F with a\n" 202 " space.\n" 203 " (for example: -F/var/run/fsfreezehook.sh)\n" 204 #endif 205 " -t, --statedir specify dir to store state information (absolute paths\n" 206 " only, default is %s)\n" 207 " -v, --verbose log extra debugging information\n" 208 " -V, --version print version information and exit\n" 209 " -d, --daemonize become a daemon\n" 210 #ifdef _WIN32 211 " -s, --service service commands: install, uninstall\n" 212 #endif 213 " -b, --blacklist comma-separated list of RPCs to disable (no spaces, \"?\"\n" 214 " to list available RPCs)\n" 215 " -h, --help display this help and exit\n" 216 "\n" 217 "Report bugs to <mdroth@linux.vnet.ibm.com>\n" 218 , cmd, QEMU_VERSION, QGA_VIRTIO_PATH_DEFAULT, dfl_pathnames.pidfile, 219 #ifdef CONFIG_FSFREEZE 220 QGA_FSFREEZE_HOOK_DEFAULT, 221 #endif 222 dfl_pathnames.state_dir); 223 } 224 225 static const char *ga_log_level_str(GLogLevelFlags level) 226 { 227 switch (level & G_LOG_LEVEL_MASK) { 228 case G_LOG_LEVEL_ERROR: 229 return "error"; 230 case G_LOG_LEVEL_CRITICAL: 231 return "critical"; 232 case G_LOG_LEVEL_WARNING: 233 return "warning"; 234 case G_LOG_LEVEL_MESSAGE: 235 return "message"; 236 case G_LOG_LEVEL_INFO: 237 return "info"; 238 case G_LOG_LEVEL_DEBUG: 239 return "debug"; 240 default: 241 return "user"; 242 } 243 } 244 245 bool ga_logging_enabled(GAState *s) 246 { 247 return s->logging_enabled; 248 } 249 250 void ga_disable_logging(GAState *s) 251 { 252 s->logging_enabled = false; 253 } 254 255 void ga_enable_logging(GAState *s) 256 { 257 s->logging_enabled = true; 258 } 259 260 static void ga_log(const gchar *domain, GLogLevelFlags level, 261 const gchar *msg, gpointer opaque) 262 { 263 GAState *s = opaque; 264 GTimeVal time; 265 const char *level_str = ga_log_level_str(level); 266 267 if (!ga_logging_enabled(s)) { 268 return; 269 } 270 271 level &= G_LOG_LEVEL_MASK; 272 #ifndef _WIN32 273 if (domain && strcmp(domain, "syslog") == 0) { 274 syslog(LOG_INFO, "%s: %s", level_str, msg); 275 } else if (level & s->log_level) { 276 #else 277 if (level & s->log_level) { 278 #endif 279 g_get_current_time(&time); 280 fprintf(s->log_file, 281 "%lu.%lu: %s: %s\n", time.tv_sec, time.tv_usec, level_str, msg); 282 fflush(s->log_file); 283 } 284 } 285 286 void ga_set_response_delimited(GAState *s) 287 { 288 s->delimit_response = true; 289 } 290 291 static FILE *ga_open_logfile(const char *logfile) 292 { 293 FILE *f; 294 295 f = fopen(logfile, "a"); 296 if (!f) { 297 return NULL; 298 } 299 300 qemu_set_cloexec(fileno(f)); 301 return f; 302 } 303 304 #ifndef _WIN32 305 static bool ga_open_pidfile(const char *pidfile) 306 { 307 int pidfd; 308 char pidstr[32]; 309 310 pidfd = qemu_open(pidfile, O_CREAT|O_WRONLY, S_IRUSR|S_IWUSR); 311 if (pidfd == -1 || lockf(pidfd, F_TLOCK, 0)) { 312 g_critical("Cannot lock pid file, %s", strerror(errno)); 313 if (pidfd != -1) { 314 close(pidfd); 315 } 316 return false; 317 } 318 319 if (ftruncate(pidfd, 0)) { 320 g_critical("Failed to truncate pid file"); 321 goto fail; 322 } 323 snprintf(pidstr, sizeof(pidstr), "%d\n", getpid()); 324 if (write(pidfd, pidstr, strlen(pidstr)) != strlen(pidstr)) { 325 g_critical("Failed to write pid file"); 326 goto fail; 327 } 328 329 /* keep pidfile open & locked forever */ 330 return true; 331 332 fail: 333 unlink(pidfile); 334 close(pidfd); 335 return false; 336 } 337 #else /* _WIN32 */ 338 static bool ga_open_pidfile(const char *pidfile) 339 { 340 return true; 341 } 342 #endif 343 344 static gint ga_strcmp(gconstpointer str1, gconstpointer str2) 345 { 346 return strcmp(str1, str2); 347 } 348 349 /* disable commands that aren't safe for fsfreeze */ 350 static void ga_disable_non_whitelisted(void) 351 { 352 char **list_head, **list; 353 bool whitelisted; 354 int i; 355 356 list_head = list = qmp_get_command_list(); 357 while (*list != NULL) { 358 whitelisted = false; 359 i = 0; 360 while (ga_freeze_whitelist[i] != NULL) { 361 if (strcmp(*list, ga_freeze_whitelist[i]) == 0) { 362 whitelisted = true; 363 } 364 i++; 365 } 366 if (!whitelisted) { 367 g_debug("disabling command: %s", *list); 368 qmp_disable_command(*list); 369 } 370 g_free(*list); 371 list++; 372 } 373 g_free(list_head); 374 } 375 376 /* [re-]enable all commands, except those explicitly blacklisted by user */ 377 static void ga_enable_non_blacklisted(GList *blacklist) 378 { 379 char **list_head, **list; 380 381 list_head = list = qmp_get_command_list(); 382 while (*list != NULL) { 383 if (g_list_find_custom(blacklist, *list, ga_strcmp) == NULL && 384 !qmp_command_is_enabled(*list)) { 385 g_debug("enabling command: %s", *list); 386 qmp_enable_command(*list); 387 } 388 g_free(*list); 389 list++; 390 } 391 g_free(list_head); 392 } 393 394 static bool ga_create_file(const char *path) 395 { 396 int fd = open(path, O_CREAT | O_WRONLY, S_IWUSR | S_IRUSR); 397 if (fd == -1) { 398 g_warning("unable to open/create file %s: %s", path, strerror(errno)); 399 return false; 400 } 401 close(fd); 402 return true; 403 } 404 405 static bool ga_delete_file(const char *path) 406 { 407 int ret = unlink(path); 408 if (ret == -1) { 409 g_warning("unable to delete file: %s: %s", path, strerror(errno)); 410 return false; 411 } 412 413 return true; 414 } 415 416 bool ga_is_frozen(GAState *s) 417 { 418 return s->frozen; 419 } 420 421 void ga_set_frozen(GAState *s) 422 { 423 if (ga_is_frozen(s)) { 424 return; 425 } 426 /* disable all non-whitelisted (for frozen state) commands */ 427 ga_disable_non_whitelisted(); 428 g_warning("disabling logging due to filesystem freeze"); 429 ga_disable_logging(s); 430 s->frozen = true; 431 if (!ga_create_file(s->state_filepath_isfrozen)) { 432 g_warning("unable to create %s, fsfreeze may not function properly", 433 s->state_filepath_isfrozen); 434 } 435 } 436 437 void ga_unset_frozen(GAState *s) 438 { 439 if (!ga_is_frozen(s)) { 440 return; 441 } 442 443 /* if we delayed creation/opening of pid/log files due to being 444 * in a frozen state at start up, do it now 445 */ 446 if (s->deferred_options.log_filepath) { 447 s->log_file = ga_open_logfile(s->deferred_options.log_filepath); 448 if (!s->log_file) { 449 s->log_file = stderr; 450 } 451 s->deferred_options.log_filepath = NULL; 452 } 453 ga_enable_logging(s); 454 g_warning("logging re-enabled due to filesystem unfreeze"); 455 if (s->deferred_options.pid_filepath) { 456 if (!ga_open_pidfile(s->deferred_options.pid_filepath)) { 457 g_warning("failed to create/open pid file"); 458 } 459 s->deferred_options.pid_filepath = NULL; 460 } 461 462 /* enable all disabled, non-blacklisted commands */ 463 ga_enable_non_blacklisted(s->blacklist); 464 s->frozen = false; 465 if (!ga_delete_file(s->state_filepath_isfrozen)) { 466 g_warning("unable to delete %s, fsfreeze may not function properly", 467 s->state_filepath_isfrozen); 468 } 469 } 470 471 #ifdef CONFIG_FSFREEZE 472 const char *ga_fsfreeze_hook(GAState *s) 473 { 474 return s->fsfreeze_hook; 475 } 476 #endif 477 478 static void become_daemon(const char *pidfile) 479 { 480 #ifndef _WIN32 481 pid_t pid, sid; 482 483 pid = fork(); 484 if (pid < 0) { 485 exit(EXIT_FAILURE); 486 } 487 if (pid > 0) { 488 exit(EXIT_SUCCESS); 489 } 490 491 if (pidfile) { 492 if (!ga_open_pidfile(pidfile)) { 493 g_critical("failed to create pidfile"); 494 exit(EXIT_FAILURE); 495 } 496 } 497 498 umask(S_IRWXG | S_IRWXO); 499 sid = setsid(); 500 if (sid < 0) { 501 goto fail; 502 } 503 if ((chdir("/")) < 0) { 504 goto fail; 505 } 506 507 reopen_fd_to_null(STDIN_FILENO); 508 reopen_fd_to_null(STDOUT_FILENO); 509 reopen_fd_to_null(STDERR_FILENO); 510 return; 511 512 fail: 513 if (pidfile) { 514 unlink(pidfile); 515 } 516 g_critical("failed to daemonize"); 517 exit(EXIT_FAILURE); 518 #endif 519 } 520 521 static int send_response(GAState *s, QObject *payload) 522 { 523 const char *buf; 524 QString *payload_qstr, *response_qstr; 525 GIOStatus status; 526 527 g_assert(payload && s->channel); 528 529 payload_qstr = qobject_to_json(payload); 530 if (!payload_qstr) { 531 return -EINVAL; 532 } 533 534 if (s->delimit_response) { 535 s->delimit_response = false; 536 response_qstr = qstring_new(); 537 qstring_append_chr(response_qstr, QGA_SENTINEL_BYTE); 538 qstring_append(response_qstr, qstring_get_str(payload_qstr)); 539 QDECREF(payload_qstr); 540 } else { 541 response_qstr = payload_qstr; 542 } 543 544 qstring_append_chr(response_qstr, '\n'); 545 buf = qstring_get_str(response_qstr); 546 status = ga_channel_write_all(s->channel, buf, strlen(buf)); 547 QDECREF(response_qstr); 548 if (status != G_IO_STATUS_NORMAL) { 549 return -EIO; 550 } 551 552 return 0; 553 } 554 555 static void process_command(GAState *s, QDict *req) 556 { 557 QObject *rsp = NULL; 558 int ret; 559 560 g_assert(req); 561 g_debug("processing command"); 562 rsp = qmp_dispatch(QOBJECT(req)); 563 if (rsp) { 564 ret = send_response(s, rsp); 565 if (ret) { 566 g_warning("error sending response: %s", strerror(ret)); 567 } 568 qobject_decref(rsp); 569 } 570 } 571 572 /* handle requests/control events coming in over the channel */ 573 static void process_event(JSONMessageParser *parser, QList *tokens) 574 { 575 GAState *s = container_of(parser, GAState, parser); 576 QObject *obj; 577 QDict *qdict; 578 Error *err = NULL; 579 int ret; 580 581 g_assert(s && parser); 582 583 g_debug("process_event: called"); 584 obj = json_parser_parse_err(tokens, NULL, &err); 585 if (err || !obj || qobject_type(obj) != QTYPE_QDICT) { 586 qobject_decref(obj); 587 qdict = qdict_new(); 588 if (!err) { 589 g_warning("failed to parse event: unknown error"); 590 error_set(&err, QERR_JSON_PARSING); 591 } else { 592 g_warning("failed to parse event: %s", error_get_pretty(err)); 593 } 594 qdict_put_obj(qdict, "error", qmp_build_error_object(err)); 595 error_free(err); 596 } else { 597 qdict = qobject_to_qdict(obj); 598 } 599 600 g_assert(qdict); 601 602 /* handle host->guest commands */ 603 if (qdict_haskey(qdict, "execute")) { 604 process_command(s, qdict); 605 } else { 606 if (!qdict_haskey(qdict, "error")) { 607 QDECREF(qdict); 608 qdict = qdict_new(); 609 g_warning("unrecognized payload format"); 610 error_set(&err, QERR_UNSUPPORTED); 611 qdict_put_obj(qdict, "error", qmp_build_error_object(err)); 612 error_free(err); 613 } 614 ret = send_response(s, QOBJECT(qdict)); 615 if (ret) { 616 g_warning("error sending error response: %s", strerror(ret)); 617 } 618 } 619 620 QDECREF(qdict); 621 } 622 623 /* false return signals GAChannel to close the current client connection */ 624 static gboolean channel_event_cb(GIOCondition condition, gpointer data) 625 { 626 GAState *s = data; 627 gchar buf[QGA_READ_COUNT_DEFAULT+1]; 628 gsize count; 629 GError *err = NULL; 630 GIOStatus status = ga_channel_read(s->channel, buf, QGA_READ_COUNT_DEFAULT, &count); 631 if (err != NULL) { 632 g_warning("error reading channel: %s", err->message); 633 g_error_free(err); 634 return false; 635 } 636 switch (status) { 637 case G_IO_STATUS_ERROR: 638 g_warning("error reading channel"); 639 return false; 640 case G_IO_STATUS_NORMAL: 641 buf[count] = 0; 642 g_debug("read data, count: %d, data: %s", (int)count, buf); 643 json_message_parser_feed(&s->parser, (char *)buf, (int)count); 644 break; 645 case G_IO_STATUS_EOF: 646 g_debug("received EOF"); 647 if (!s->virtio) { 648 return false; 649 } 650 /* fall through */ 651 case G_IO_STATUS_AGAIN: 652 /* virtio causes us to spin here when no process is attached to 653 * host-side chardev. sleep a bit to mitigate this 654 */ 655 if (s->virtio) { 656 usleep(100*1000); 657 } 658 return true; 659 default: 660 g_warning("unknown channel read status, closing"); 661 return false; 662 } 663 return true; 664 } 665 666 static gboolean channel_init(GAState *s, const gchar *method, const gchar *path) 667 { 668 GAChannelMethod channel_method; 669 670 if (method == NULL) { 671 method = "virtio-serial"; 672 } 673 674 if (path == NULL) { 675 if (strcmp(method, "virtio-serial") != 0) { 676 g_critical("must specify a path for this channel"); 677 return false; 678 } 679 /* try the default path for the virtio-serial port */ 680 path = QGA_VIRTIO_PATH_DEFAULT; 681 } 682 683 if (strcmp(method, "virtio-serial") == 0) { 684 s->virtio = true; /* virtio requires special handling in some cases */ 685 channel_method = GA_CHANNEL_VIRTIO_SERIAL; 686 } else if (strcmp(method, "isa-serial") == 0) { 687 channel_method = GA_CHANNEL_ISA_SERIAL; 688 } else if (strcmp(method, "unix-listen") == 0) { 689 channel_method = GA_CHANNEL_UNIX_LISTEN; 690 } else { 691 g_critical("unsupported channel method/type: %s", method); 692 return false; 693 } 694 695 s->channel = ga_channel_new(channel_method, path, channel_event_cb, s); 696 if (!s->channel) { 697 g_critical("failed to create guest agent channel"); 698 return false; 699 } 700 701 return true; 702 } 703 704 #ifdef _WIN32 705 DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data, 706 LPVOID ctx) 707 { 708 DWORD ret = NO_ERROR; 709 GAService *service = &ga_state->service; 710 711 switch (ctrl) 712 { 713 case SERVICE_CONTROL_STOP: 714 case SERVICE_CONTROL_SHUTDOWN: 715 quit_handler(SIGTERM); 716 service->status.dwCurrentState = SERVICE_STOP_PENDING; 717 SetServiceStatus(service->status_handle, &service->status); 718 break; 719 720 default: 721 ret = ERROR_CALL_NOT_IMPLEMENTED; 722 } 723 return ret; 724 } 725 726 VOID WINAPI service_main(DWORD argc, TCHAR *argv[]) 727 { 728 GAService *service = &ga_state->service; 729 730 service->status_handle = RegisterServiceCtrlHandlerEx(QGA_SERVICE_NAME, 731 service_ctrl_handler, NULL); 732 733 if (service->status_handle == 0) { 734 g_critical("Failed to register extended requests function!\n"); 735 return; 736 } 737 738 service->status.dwServiceType = SERVICE_WIN32; 739 service->status.dwCurrentState = SERVICE_RUNNING; 740 service->status.dwControlsAccepted = SERVICE_ACCEPT_STOP | SERVICE_ACCEPT_SHUTDOWN; 741 service->status.dwWin32ExitCode = NO_ERROR; 742 service->status.dwServiceSpecificExitCode = NO_ERROR; 743 service->status.dwCheckPoint = 0; 744 service->status.dwWaitHint = 0; 745 SetServiceStatus(service->status_handle, &service->status); 746 747 g_main_loop_run(ga_state->main_loop); 748 749 service->status.dwCurrentState = SERVICE_STOPPED; 750 SetServiceStatus(service->status_handle, &service->status); 751 } 752 #endif 753 754 static void set_persistent_state_defaults(GAPersistentState *pstate) 755 { 756 g_assert(pstate); 757 pstate->fd_counter = QGA_PSTATE_DEFAULT_FD_COUNTER; 758 } 759 760 static void persistent_state_from_keyfile(GAPersistentState *pstate, 761 GKeyFile *keyfile) 762 { 763 g_assert(pstate); 764 g_assert(keyfile); 765 /* if any fields are missing, either because the file was tampered with 766 * by agents of chaos, or because the field wasn't present at the time the 767 * file was created, the best we can ever do is start over with the default 768 * values. so load them now, and ignore any errors in accessing key-value 769 * pairs 770 */ 771 set_persistent_state_defaults(pstate); 772 773 if (g_key_file_has_key(keyfile, "global", "fd_counter", NULL)) { 774 pstate->fd_counter = 775 g_key_file_get_integer(keyfile, "global", "fd_counter", NULL); 776 } 777 } 778 779 static void persistent_state_to_keyfile(const GAPersistentState *pstate, 780 GKeyFile *keyfile) 781 { 782 g_assert(pstate); 783 g_assert(keyfile); 784 785 g_key_file_set_integer(keyfile, "global", "fd_counter", pstate->fd_counter); 786 } 787 788 static gboolean write_persistent_state(const GAPersistentState *pstate, 789 const gchar *path) 790 { 791 GKeyFile *keyfile = g_key_file_new(); 792 GError *gerr = NULL; 793 gboolean ret = true; 794 gchar *data = NULL; 795 gsize data_len; 796 797 g_assert(pstate); 798 799 persistent_state_to_keyfile(pstate, keyfile); 800 data = g_key_file_to_data(keyfile, &data_len, &gerr); 801 if (gerr) { 802 g_critical("failed to convert persistent state to string: %s", 803 gerr->message); 804 ret = false; 805 goto out; 806 } 807 808 g_file_set_contents(path, data, data_len, &gerr); 809 if (gerr) { 810 g_critical("failed to write persistent state to %s: %s", 811 path, gerr->message); 812 ret = false; 813 goto out; 814 } 815 816 out: 817 if (gerr) { 818 g_error_free(gerr); 819 } 820 if (keyfile) { 821 g_key_file_free(keyfile); 822 } 823 g_free(data); 824 return ret; 825 } 826 827 static gboolean read_persistent_state(GAPersistentState *pstate, 828 const gchar *path, gboolean frozen) 829 { 830 GKeyFile *keyfile = NULL; 831 GError *gerr = NULL; 832 struct stat st; 833 gboolean ret = true; 834 835 g_assert(pstate); 836 837 if (stat(path, &st) == -1) { 838 /* it's okay if state file doesn't exist, but any other error 839 * indicates a permissions issue or some other misconfiguration 840 * that we likely won't be able to recover from. 841 */ 842 if (errno != ENOENT) { 843 g_critical("unable to access state file at path %s: %s", 844 path, strerror(errno)); 845 ret = false; 846 goto out; 847 } 848 849 /* file doesn't exist. initialize state to default values and 850 * attempt to save now. (we could wait till later when we have 851 * modified state we need to commit, but if there's a problem, 852 * such as a missing parent directory, we want to catch it now) 853 * 854 * there is a potential scenario where someone either managed to 855 * update the agent from a version that didn't use a key store 856 * while qemu-ga thought the filesystem was frozen, or 857 * deleted the key store prior to issuing a fsfreeze, prior 858 * to restarting the agent. in this case we go ahead and defer 859 * initial creation till we actually have modified state to 860 * write, otherwise fail to recover from freeze. 861 */ 862 set_persistent_state_defaults(pstate); 863 if (!frozen) { 864 ret = write_persistent_state(pstate, path); 865 if (!ret) { 866 g_critical("unable to create state file at path %s", path); 867 ret = false; 868 goto out; 869 } 870 } 871 ret = true; 872 goto out; 873 } 874 875 keyfile = g_key_file_new(); 876 g_key_file_load_from_file(keyfile, path, 0, &gerr); 877 if (gerr) { 878 g_critical("error loading persistent state from path: %s, %s", 879 path, gerr->message); 880 ret = false; 881 goto out; 882 } 883 884 persistent_state_from_keyfile(pstate, keyfile); 885 886 out: 887 if (keyfile) { 888 g_key_file_free(keyfile); 889 } 890 if (gerr) { 891 g_error_free(gerr); 892 } 893 894 return ret; 895 } 896 897 int64_t ga_get_fd_handle(GAState *s, Error **errp) 898 { 899 int64_t handle; 900 901 g_assert(s->pstate_filepath); 902 /* we blacklist commands and avoid operations that potentially require 903 * writing to disk when we're in a frozen state. this includes opening 904 * new files, so we should never get here in that situation 905 */ 906 g_assert(!ga_is_frozen(s)); 907 908 handle = s->pstate.fd_counter++; 909 910 /* This should never happen on a reasonable timeframe, as guest-file-open 911 * would have to be issued 2^63 times */ 912 if (s->pstate.fd_counter == INT64_MAX) { 913 abort(); 914 } 915 916 if (!write_persistent_state(&s->pstate, s->pstate_filepath)) { 917 error_setg(errp, "failed to commit persistent state to disk"); 918 } 919 920 return handle; 921 } 922 923 int main(int argc, char **argv) 924 { 925 const char *sopt = "hVvdm:p:l:f:F::b:s:t:"; 926 const char *method = NULL, *path = NULL; 927 const char *log_filepath = NULL; 928 const char *pid_filepath; 929 #ifdef CONFIG_FSFREEZE 930 const char *fsfreeze_hook = NULL; 931 #endif 932 const char *state_dir; 933 #ifdef _WIN32 934 const char *service = NULL; 935 #endif 936 const struct option lopt[] = { 937 { "help", 0, NULL, 'h' }, 938 { "version", 0, NULL, 'V' }, 939 { "logfile", 1, NULL, 'l' }, 940 { "pidfile", 1, NULL, 'f' }, 941 #ifdef CONFIG_FSFREEZE 942 { "fsfreeze-hook", 2, NULL, 'F' }, 943 #endif 944 { "verbose", 0, NULL, 'v' }, 945 { "method", 1, NULL, 'm' }, 946 { "path", 1, NULL, 'p' }, 947 { "daemonize", 0, NULL, 'd' }, 948 { "blacklist", 1, NULL, 'b' }, 949 #ifdef _WIN32 950 { "service", 1, NULL, 's' }, 951 #endif 952 { "statedir", 1, NULL, 't' }, 953 { NULL, 0, NULL, 0 } 954 }; 955 int opt_ind = 0, ch, daemonize = 0, i, j, len; 956 GLogLevelFlags log_level = G_LOG_LEVEL_ERROR | G_LOG_LEVEL_CRITICAL; 957 GList *blacklist = NULL; 958 GAState *s; 959 960 module_call_init(MODULE_INIT_QAPI); 961 962 init_dfl_pathnames(); 963 pid_filepath = dfl_pathnames.pidfile; 964 state_dir = dfl_pathnames.state_dir; 965 966 while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) { 967 switch (ch) { 968 case 'm': 969 method = optarg; 970 break; 971 case 'p': 972 path = optarg; 973 break; 974 case 'l': 975 log_filepath = optarg; 976 break; 977 case 'f': 978 pid_filepath = optarg; 979 break; 980 #ifdef CONFIG_FSFREEZE 981 case 'F': 982 fsfreeze_hook = optarg ? optarg : QGA_FSFREEZE_HOOK_DEFAULT; 983 break; 984 #endif 985 case 't': 986 state_dir = optarg; 987 break; 988 case 'v': 989 /* enable all log levels */ 990 log_level = G_LOG_LEVEL_MASK; 991 break; 992 case 'V': 993 printf("QEMU Guest Agent %s\n", QEMU_VERSION); 994 return 0; 995 case 'd': 996 daemonize = 1; 997 break; 998 case 'b': { 999 char **list_head, **list; 1000 if (is_help_option(optarg)) { 1001 list_head = list = qmp_get_command_list(); 1002 while (*list != NULL) { 1003 printf("%s\n", *list); 1004 g_free(*list); 1005 list++; 1006 } 1007 g_free(list_head); 1008 return 0; 1009 } 1010 for (j = 0, i = 0, len = strlen(optarg); i < len; i++) { 1011 if (optarg[i] == ',') { 1012 optarg[i] = 0; 1013 blacklist = g_list_append(blacklist, &optarg[j]); 1014 j = i + 1; 1015 } 1016 } 1017 if (j < i) { 1018 blacklist = g_list_append(blacklist, &optarg[j]); 1019 } 1020 break; 1021 } 1022 #ifdef _WIN32 1023 case 's': 1024 service = optarg; 1025 if (strcmp(service, "install") == 0) { 1026 const char *fixed_state_dir; 1027 1028 /* If the user passed the "-t" option, we save that state dir 1029 * in the service. Otherwise we let the service fetch the state 1030 * dir from the environment when it starts. 1031 */ 1032 fixed_state_dir = (state_dir == dfl_pathnames.state_dir) ? 1033 NULL : 1034 state_dir; 1035 if (ga_install_vss_provider()) { 1036 return EXIT_FAILURE; 1037 } 1038 if (ga_install_service(path, log_filepath, fixed_state_dir)) { 1039 return EXIT_FAILURE; 1040 } 1041 return 0; 1042 } else if (strcmp(service, "uninstall") == 0) { 1043 ga_uninstall_vss_provider(); 1044 return ga_uninstall_service(); 1045 } else { 1046 printf("Unknown service command.\n"); 1047 return EXIT_FAILURE; 1048 } 1049 break; 1050 #endif 1051 case 'h': 1052 usage(argv[0]); 1053 return 0; 1054 case '?': 1055 g_print("Unknown option, try '%s --help' for more information.\n", 1056 argv[0]); 1057 return EXIT_FAILURE; 1058 } 1059 } 1060 1061 #ifdef _WIN32 1062 /* On win32 the state directory is application specific (be it the default 1063 * or a user override). We got past the command line parsing; let's create 1064 * the directory (with any intermediate directories). If we run into an 1065 * error later on, we won't try to clean up the directory, it is considered 1066 * persistent. 1067 */ 1068 if (g_mkdir_with_parents(state_dir, S_IRWXU) == -1) { 1069 g_critical("unable to create (an ancestor of) the state directory" 1070 " '%s': %s", state_dir, strerror(errno)); 1071 return EXIT_FAILURE; 1072 } 1073 #endif 1074 1075 s = g_malloc0(sizeof(GAState)); 1076 s->log_level = log_level; 1077 s->log_file = stderr; 1078 #ifdef CONFIG_FSFREEZE 1079 s->fsfreeze_hook = fsfreeze_hook; 1080 #endif 1081 g_log_set_default_handler(ga_log, s); 1082 g_log_set_fatal_mask(NULL, G_LOG_LEVEL_ERROR); 1083 ga_enable_logging(s); 1084 s->state_filepath_isfrozen = g_strdup_printf("%s/qga.state.isfrozen", 1085 state_dir); 1086 s->pstate_filepath = g_strdup_printf("%s/qga.state", state_dir); 1087 s->frozen = false; 1088 1089 #ifndef _WIN32 1090 /* check if a previous instance of qemu-ga exited with filesystems' state 1091 * marked as frozen. this could be a stale value (a non-qemu-ga process 1092 * or reboot may have since unfrozen them), but better to require an 1093 * uneeded unfreeze than to risk hanging on start-up 1094 */ 1095 struct stat st; 1096 if (stat(s->state_filepath_isfrozen, &st) == -1) { 1097 /* it's okay if the file doesn't exist, but if we can't access for 1098 * some other reason, such as permissions, there's a configuration 1099 * that needs to be addressed. so just bail now before we get into 1100 * more trouble later 1101 */ 1102 if (errno != ENOENT) { 1103 g_critical("unable to access state file at path %s: %s", 1104 s->state_filepath_isfrozen, strerror(errno)); 1105 return EXIT_FAILURE; 1106 } 1107 } else { 1108 g_warning("previous instance appears to have exited with frozen" 1109 " filesystems. deferring logging/pidfile creation and" 1110 " disabling non-fsfreeze-safe commands until" 1111 " guest-fsfreeze-thaw is issued, or filesystems are" 1112 " manually unfrozen and the file %s is removed", 1113 s->state_filepath_isfrozen); 1114 s->frozen = true; 1115 } 1116 #endif 1117 1118 if (ga_is_frozen(s)) { 1119 if (daemonize) { 1120 /* delay opening/locking of pidfile till filesystem are unfrozen */ 1121 s->deferred_options.pid_filepath = pid_filepath; 1122 become_daemon(NULL); 1123 } 1124 if (log_filepath) { 1125 /* delay opening the log file till filesystems are unfrozen */ 1126 s->deferred_options.log_filepath = log_filepath; 1127 } 1128 ga_disable_logging(s); 1129 ga_disable_non_whitelisted(); 1130 } else { 1131 if (daemonize) { 1132 become_daemon(pid_filepath); 1133 } 1134 if (log_filepath) { 1135 FILE *log_file = ga_open_logfile(log_filepath); 1136 if (!log_file) { 1137 g_critical("unable to open specified log file: %s", 1138 strerror(errno)); 1139 goto out_bad; 1140 } 1141 s->log_file = log_file; 1142 } 1143 } 1144 1145 /* load persistent state from disk */ 1146 if (!read_persistent_state(&s->pstate, 1147 s->pstate_filepath, 1148 ga_is_frozen(s))) { 1149 g_critical("failed to load persistent state"); 1150 goto out_bad; 1151 } 1152 1153 if (blacklist) { 1154 s->blacklist = blacklist; 1155 do { 1156 g_debug("disabling command: %s", (char *)blacklist->data); 1157 qmp_disable_command(blacklist->data); 1158 blacklist = g_list_next(blacklist); 1159 } while (blacklist); 1160 } 1161 s->command_state = ga_command_state_new(); 1162 ga_command_state_init(s, s->command_state); 1163 ga_command_state_init_all(s->command_state); 1164 json_message_parser_init(&s->parser, process_event); 1165 ga_state = s; 1166 #ifndef _WIN32 1167 if (!register_signal_handlers()) { 1168 g_critical("failed to register signal handlers"); 1169 goto out_bad; 1170 } 1171 #endif 1172 1173 s->main_loop = g_main_loop_new(NULL, false); 1174 if (!channel_init(ga_state, method, path)) { 1175 g_critical("failed to initialize guest agent channel"); 1176 goto out_bad; 1177 } 1178 #ifndef _WIN32 1179 g_main_loop_run(ga_state->main_loop); 1180 #else 1181 if (daemonize) { 1182 SERVICE_TABLE_ENTRY service_table[] = { 1183 { (char *)QGA_SERVICE_NAME, service_main }, { NULL, NULL } }; 1184 StartServiceCtrlDispatcher(service_table); 1185 } else { 1186 g_main_loop_run(ga_state->main_loop); 1187 } 1188 #endif 1189 1190 ga_command_state_cleanup_all(ga_state->command_state); 1191 ga_channel_free(ga_state->channel); 1192 1193 if (daemonize) { 1194 unlink(pid_filepath); 1195 } 1196 return 0; 1197 1198 out_bad: 1199 if (daemonize) { 1200 unlink(pid_filepath); 1201 } 1202 return EXIT_FAILURE; 1203 } 1204