1HXCOMM Use DEFHEADING() to define headings in both help text and texi 2HXCOMM Text between STEXI and ETEXI are copied to texi version and 3HXCOMM discarded from C version 4HXCOMM DEF(option, HAS_ARG/0, opt_enum, opt_help, arch_mask) is used to 5HXCOMM construct option structures, enums and help message for specified 6HXCOMM architectures. 7HXCOMM HXCOMM can be used for comments, discarded from both texi and C 8 9DEFHEADING(Standard options:) 10STEXI 11@table @option 12ETEXI 13 14DEF("help", 0, QEMU_OPTION_h, 15 "-h or -help display this help and exit\n", QEMU_ARCH_ALL) 16STEXI 17@item -h 18@findex -h 19Display help and exit 20ETEXI 21 22DEF("version", 0, QEMU_OPTION_version, 23 "-version display version information and exit\n", QEMU_ARCH_ALL) 24STEXI 25@item -version 26@findex -version 27Display version information and exit 28ETEXI 29 30DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ 31 "-machine [type=]name[,prop[=value][,...]]\n" 32 " selects emulated machine ('-machine help' for list)\n" 33 " property accel=accel1[:accel2[:...]] selects accelerator\n" 34 " supported accelerators are kvm, xen, tcg (default: tcg)\n" 35 " kernel_irqchip=on|off controls accelerated irqchip support\n" 36 " kernel_irqchip=on|off|split controls accelerated irqchip support (default=off)\n" 37 " vmport=on|off|auto controls emulation of vmport (default: auto)\n" 38 " kvm_shadow_mem=size of KVM shadow MMU in bytes\n" 39 " dump-guest-core=on|off include guest memory in a core dump (default=on)\n" 40 " mem-merge=on|off controls memory merge support (default: on)\n" 41 " igd-passthru=on|off controls IGD GFX passthrough support (default=off)\n" 42 " aes-key-wrap=on|off controls support for AES key wrapping (default=on)\n" 43 " dea-key-wrap=on|off controls support for DEA key wrapping (default=on)\n" 44 " suppress-vmdesc=on|off disables self-describing migration (default=off)\n" 45 " nvdimm=on|off controls NVDIMM support (default=off)\n" 46 " enforce-config-section=on|off enforce configuration section migration (default=off)\n", 47 QEMU_ARCH_ALL) 48STEXI 49@item -machine [type=]@var{name}[,prop=@var{value}[,...]] 50@findex -machine 51Select the emulated machine by @var{name}. Use @code{-machine help} to list 52available machines. Supported machine properties are: 53@table @option 54@item accel=@var{accels1}[:@var{accels2}[:...]] 55This is used to enable an accelerator. Depending on the target architecture, 56kvm, xen, or tcg can be available. By default, tcg is used. If there is more 57than one accelerator specified, the next one is used if the previous one fails 58to initialize. 59@item kernel_irqchip=on|off 60Controls in-kernel irqchip support for the chosen accelerator when available. 61@item gfx_passthru=on|off 62Enables IGD GFX passthrough support for the chosen machine when available. 63@item vmport=on|off|auto 64Enables emulation of VMWare IO port, for vmmouse etc. auto says to select the 65value based on accel. For accel=xen the default is off otherwise the default 66is on. 67@item kvm_shadow_mem=size 68Defines the size of the KVM shadow MMU. 69@item dump-guest-core=on|off 70Include guest memory in a core dump. The default is on. 71@item mem-merge=on|off 72Enables or disables memory merge support. This feature, when supported by 73the host, de-duplicates identical memory pages among VMs instances 74(enabled by default). 75@item aes-key-wrap=on|off 76Enables or disables AES key wrapping support on s390-ccw hosts. This feature 77controls whether AES wrapping keys will be created to allow 78execution of AES cryptographic functions. The default is on. 79@item dea-key-wrap=on|off 80Enables or disables DEA key wrapping support on s390-ccw hosts. This feature 81controls whether DEA wrapping keys will be created to allow 82execution of DEA cryptographic functions. The default is on. 83@item nvdimm=on|off 84Enables or disables NVDIMM support. The default is off. 85@end table 86ETEXI 87 88HXCOMM Deprecated by -machine 89DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL) 90 91DEF("cpu", HAS_ARG, QEMU_OPTION_cpu, 92 "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL) 93STEXI 94@item -cpu @var{model} 95@findex -cpu 96Select CPU model (@code{-cpu help} for list and additional feature selection) 97ETEXI 98 99DEF("smp", HAS_ARG, QEMU_OPTION_smp, 100 "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n" 101 " set the number of CPUs to 'n' [default=1]\n" 102 " maxcpus= maximum number of total cpus, including\n" 103 " offline CPUs for hotplug, etc\n" 104 " cores= number of CPU cores on one socket\n" 105 " threads= number of threads on one CPU core\n" 106 " sockets= number of discrete sockets in the system\n", 107 QEMU_ARCH_ALL) 108STEXI 109@item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}] 110@findex -smp 111Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255 112CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs 113to 4. 114For the PC target, the number of @var{cores} per socket, the number 115of @var{threads} per cores and the total number of @var{sockets} can be 116specified. Missing values will be computed. If any on the three values is 117given, the total number of CPUs @var{n} can be omitted. @var{maxcpus} 118specifies the maximum number of hotpluggable CPUs. 119ETEXI 120 121DEF("numa", HAS_ARG, QEMU_OPTION_numa, 122 "-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]\n" 123 "-numa node[,memdev=id][,cpus=cpu[-cpu]][,nodeid=node]\n", QEMU_ARCH_ALL) 124STEXI 125@item -numa node[,mem=@var{size}][,cpus=@var{cpu[-cpu]}][,nodeid=@var{node}] 126@itemx -numa node[,memdev=@var{id}][,cpus=@var{cpu[-cpu]}][,nodeid=@var{node}] 127@findex -numa 128Simulate a multi node NUMA system. If @samp{mem}, @samp{memdev} 129and @samp{cpus} are omitted, resources are split equally. Also, note 130that the -@option{numa} option doesn't allocate any of the specified 131resources. That is, it just assigns existing resources to NUMA nodes. This 132means that one still has to use the @option{-m}, @option{-smp} options 133to allocate RAM and VCPUs respectively, and possibly @option{-object} 134to specify the memory backend for the @samp{memdev} suboption. 135 136@samp{mem} and @samp{memdev} are mutually exclusive. Furthermore, if one 137node uses @samp{memdev}, all of them have to use it. 138ETEXI 139 140DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd, 141 "-add-fd fd=fd,set=set[,opaque=opaque]\n" 142 " Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL) 143STEXI 144@item -add-fd fd=@var{fd},set=@var{set}[,opaque=@var{opaque}] 145@findex -add-fd 146 147Add a file descriptor to an fd set. Valid options are: 148 149@table @option 150@item fd=@var{fd} 151This option defines the file descriptor of which a duplicate is added to fd set. 152The file descriptor cannot be stdin, stdout, or stderr. 153@item set=@var{set} 154This option defines the ID of the fd set to add the file descriptor to. 155@item opaque=@var{opaque} 156This option defines a free-form string that can be used to describe @var{fd}. 157@end table 158 159You can open an image using pre-opened file descriptors from an fd set: 160@example 161qemu-system-i386 162-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" 163-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" 164-drive file=/dev/fdset/2,index=0,media=disk 165@end example 166ETEXI 167 168DEF("set", HAS_ARG, QEMU_OPTION_set, 169 "-set group.id.arg=value\n" 170 " set <arg> parameter for item <id> of type <group>\n" 171 " i.e. -set drive.$id.file=/path/to/image\n", QEMU_ARCH_ALL) 172STEXI 173@item -set @var{group}.@var{id}.@var{arg}=@var{value} 174@findex -set 175Set parameter @var{arg} for item @var{id} of type @var{group} 176ETEXI 177 178DEF("global", HAS_ARG, QEMU_OPTION_global, 179 "-global driver.property=value\n" 180 "-global driver=driver,property=property,value=value\n" 181 " set a global default for a driver property\n", 182 QEMU_ARCH_ALL) 183STEXI 184@item -global @var{driver}.@var{prop}=@var{value} 185@itemx -global driver=@var{driver},property=@var{property},value=@var{value} 186@findex -global 187Set default value of @var{driver}'s property @var{prop} to @var{value}, e.g.: 188 189@example 190qemu-system-i386 -global ide-drive.physical_block_size=4096 -drive file=file,if=ide,index=0,media=disk 191@end example 192 193In particular, you can use this to set driver properties for devices which are 194created automatically by the machine model. To create a device which is not 195created automatically and set properties on it, use -@option{device}. 196 197-global @var{driver}.@var{prop}=@var{value} is shorthand for -global 198driver=@var{driver},property=@var{prop},value=@var{value}. The 199longhand syntax works even when @var{driver} contains a dot. 200ETEXI 201 202DEF("boot", HAS_ARG, QEMU_OPTION_boot, 203 "-boot [order=drives][,once=drives][,menu=on|off]\n" 204 " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time][,strict=on|off]\n" 205 " 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n" 206 " 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on\n" 207 " 'sp_time': the period that splash picture last if menu=on, unit is ms\n" 208 " 'rb_timeout': the timeout before guest reboot when boot failed, unit is ms\n", 209 QEMU_ARCH_ALL) 210STEXI 211@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}][,strict=on|off] 212@findex -boot 213Specify boot order @var{drives} as a string of drive letters. Valid 214drive letters depend on the target architecture. The x86 PC uses: a, b 215(floppy 1 and 2), c (first hard disk), d (first CD-ROM), n-p (Etherboot 216from network adapter 1-4), hard disk boot is the default. To apply a 217particular boot order only on the first startup, specify it via 218@option{once}. 219 220Interactive boot menus/prompts can be enabled via @option{menu=on} as far 221as firmware/BIOS supports them. The default is non-interactive boot. 222 223A splash picture could be passed to bios, enabling user to show it as logo, 224when option splash=@var{sp_name} is given and menu=on, If firmware/BIOS 225supports them. Currently Seabios for X86 system support it. 226limitation: The splash file could be a jpeg file or a BMP file in 24 BPP 227format(true color). The resolution should be supported by the SVGA mode, so 228the recommended is 320x240, 640x480, 800x640. 229 230A timeout could be passed to bios, guest will pause for @var{rb_timeout} ms 231when boot failed, then reboot. If @var{rb_timeout} is '-1', guest will not 232reboot, qemu passes '-1' to bios by default. Currently Seabios for X86 233system support it. 234 235Do strict boot via @option{strict=on} as far as firmware/BIOS 236supports it. This only effects when boot priority is changed by 237bootindex options. The default is non-strict boot. 238 239@example 240# try to boot from network first, then from hard disk 241qemu-system-i386 -boot order=nc 242# boot from CD-ROM first, switch back to default order after reboot 243qemu-system-i386 -boot once=d 244# boot with a splash picture for 5 seconds. 245qemu-system-i386 -boot menu=on,splash=/root/boot.bmp,splash-time=5000 246@end example 247 248Note: The legacy format '-boot @var{drives}' is still supported but its 249use is discouraged as it may be removed from future versions. 250ETEXI 251 252DEF("m", HAS_ARG, QEMU_OPTION_m, 253 "-m[emory] [size=]megs[,slots=n,maxmem=size]\n" 254 " configure guest RAM\n" 255 " size: initial amount of guest memory\n" 256 " slots: number of hotplug slots (default: none)\n" 257 " maxmem: maximum amount of guest memory (default: none)\n" 258 "NOTE: Some architectures might enforce a specific granularity\n", 259 QEMU_ARCH_ALL) 260STEXI 261@item -m [size=]@var{megs}[,slots=n,maxmem=size] 262@findex -m 263Sets guest startup RAM size to @var{megs} megabytes. Default is 128 MiB. 264Optionally, a suffix of ``M'' or ``G'' can be used to signify a value in 265megabytes or gigabytes respectively. Optional pair @var{slots}, @var{maxmem} 266could be used to set amount of hotpluggable memory slots and maximum amount of 267memory. Note that @var{maxmem} must be aligned to the page size. 268 269For example, the following command-line sets the guest startup RAM size to 2701GB, creates 3 slots to hotplug additional memory and sets the maximum 271memory the guest can reach to 4GB: 272 273@example 274qemu-system-x86_64 -m 1G,slots=3,maxmem=4G 275@end example 276 277If @var{slots} and @var{maxmem} are not specified, memory hotplug won't 278be enabled and the guest startup RAM will never increase. 279ETEXI 280 281DEF("mem-path", HAS_ARG, QEMU_OPTION_mempath, 282 "-mem-path FILE provide backing storage for guest RAM\n", QEMU_ARCH_ALL) 283STEXI 284@item -mem-path @var{path} 285@findex -mem-path 286Allocate guest RAM from a temporarily created file in @var{path}. 287ETEXI 288 289DEF("mem-prealloc", 0, QEMU_OPTION_mem_prealloc, 290 "-mem-prealloc preallocate guest memory (use with -mem-path)\n", 291 QEMU_ARCH_ALL) 292STEXI 293@item -mem-prealloc 294@findex -mem-prealloc 295Preallocate memory when using -mem-path. 296ETEXI 297 298DEF("k", HAS_ARG, QEMU_OPTION_k, 299 "-k language use keyboard layout (for example 'fr' for French)\n", 300 QEMU_ARCH_ALL) 301STEXI 302@item -k @var{language} 303@findex -k 304Use keyboard layout @var{language} (for example @code{fr} for 305French). This option is only needed where it is not easy to get raw PC 306keycodes (e.g. on Macs, with some X11 servers or with a VNC or curses 307display). You don't normally need to use it on PC/Linux or PC/Windows 308hosts. 309 310The available layouts are: 311@example 312ar de-ch es fo fr-ca hu ja mk no pt-br sv 313da en-gb et fr fr-ch is lt nl pl ru th 314de en-us fi fr-be hr it lv nl-be pt sl tr 315@end example 316 317The default is @code{en-us}. 318ETEXI 319 320 321DEF("audio-help", 0, QEMU_OPTION_audio_help, 322 "-audio-help print list of audio drivers and their options\n", 323 QEMU_ARCH_ALL) 324STEXI 325@item -audio-help 326@findex -audio-help 327Will show the audio subsystem help: list of drivers, tunable 328parameters. 329ETEXI 330 331DEF("soundhw", HAS_ARG, QEMU_OPTION_soundhw, 332 "-soundhw c1,... enable audio support\n" 333 " and only specified sound cards (comma separated list)\n" 334 " use '-soundhw help' to get the list of supported cards\n" 335 " use '-soundhw all' to enable all of them\n", QEMU_ARCH_ALL) 336STEXI 337@item -soundhw @var{card1}[,@var{card2},...] or -soundhw all 338@findex -soundhw 339Enable audio and selected sound hardware. Use 'help' to print all 340available sound hardware. 341 342@example 343qemu-system-i386 -soundhw sb16,adlib disk.img 344qemu-system-i386 -soundhw es1370 disk.img 345qemu-system-i386 -soundhw ac97 disk.img 346qemu-system-i386 -soundhw hda disk.img 347qemu-system-i386 -soundhw all disk.img 348qemu-system-i386 -soundhw help 349@end example 350 351Note that Linux's i810_audio OSS kernel (for AC97) module might 352require manually specifying clocking. 353 354@example 355modprobe i810_audio clocking=48000 356@end example 357ETEXI 358 359DEF("balloon", HAS_ARG, QEMU_OPTION_balloon, 360 "-balloon none disable balloon device\n" 361 "-balloon virtio[,addr=str]\n" 362 " enable virtio balloon device (default)\n", QEMU_ARCH_ALL) 363STEXI 364@item -balloon none 365@findex -balloon 366Disable balloon device. 367@item -balloon virtio[,addr=@var{addr}] 368Enable virtio balloon device (default), optionally with PCI address 369@var{addr}. 370ETEXI 371 372DEF("device", HAS_ARG, QEMU_OPTION_device, 373 "-device driver[,prop[=value][,...]]\n" 374 " add device (based on driver)\n" 375 " prop=value,... sets driver properties\n" 376 " use '-device help' to print all possible drivers\n" 377 " use '-device driver,help' to print all possible properties\n", 378 QEMU_ARCH_ALL) 379STEXI 380@item -device @var{driver}[,@var{prop}[=@var{value}][,...]] 381@findex -device 382Add device @var{driver}. @var{prop}=@var{value} sets driver 383properties. Valid properties depend on the driver. To get help on 384possible drivers and properties, use @code{-device help} and 385@code{-device @var{driver},help}. 386 387Some drivers are: 388@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}] 389 390Add an IPMI BMC. This is a simulation of a hardware management 391interface processor that normally sits on a system. It provides 392a watchdog and the ability to reset and power control the system. 393You need to connect this to an IPMI interface to make it useful 394 395The IPMI slave address to use for the BMC. The default is 0x20. 396This address is the BMC's address on the I2C network of management 397controllers. If you don't know what this means, it is safe to ignore 398it. 399 400@item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}] 401 402Add a connection to an external IPMI BMC simulator. Instead of 403locally emulating the BMC like the above item, instead connect 404to an external entity that provides the IPMI services. 405 406A connection is made to an external BMC simulator. If you do this, it 407is strongly recommended that you use the "reconnect=" chardev option 408to reconnect to the simulator if the connection is lost. Note that if 409this is not used carefully, it can be a security issue, as the 410interface has the ability to send resets, NMIs, and power off the VM. 411It's best if QEMU makes a connection to an external simulator running 412on a secure port on localhost, so neither the simulator nor QEMU is 413exposed to any outside network. 414 415See the "lanserv/README.vm" file in the OpenIPMI library for more 416details on the external interface. 417 418@item -device isa-ipmi-kcs,bmc=@var{id}[,ioport=@var{val}][,irq=@var{val}] 419 420Add a KCS IPMI interafce on the ISA bus. This also adds a 421corresponding ACPI and SMBIOS entries, if appropriate. 422 423@table @option 424@item bmc=@var{id} 425The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above. 426@item ioport=@var{val} 427Define the I/O address of the interface. The default is 0xca0 for KCS. 428@item irq=@var{val} 429Define the interrupt to use. The default is 5. To disable interrupts, 430set this to 0. 431@end table 432 433@item -device isa-ipmi-bt,bmc=@var{id}[,ioport=@var{val}][,irq=@var{val}] 434 435Like the KCS interface, but defines a BT interface. The default port is 4360xe4 and the default interrupt is 5. 437 438ETEXI 439 440DEF("name", HAS_ARG, QEMU_OPTION_name, 441 "-name string1[,process=string2][,debug-threads=on|off]\n" 442 " set the name of the guest\n" 443 " string1 sets the window title and string2 the process name (on Linux)\n" 444 " When debug-threads is enabled, individual threads are given a separate name (on Linux)\n" 445 " NOTE: The thread names are for debugging and not a stable API.\n", 446 QEMU_ARCH_ALL) 447STEXI 448@item -name @var{name} 449@findex -name 450Sets the @var{name} of the guest. 451This name will be displayed in the SDL window caption. 452The @var{name} will also be used for the VNC server. 453Also optionally set the top visible process name in Linux. 454Naming of individual threads can also be enabled on Linux to aid debugging. 455ETEXI 456 457DEF("uuid", HAS_ARG, QEMU_OPTION_uuid, 458 "-uuid %08x-%04x-%04x-%04x-%012x\n" 459 " specify machine UUID\n", QEMU_ARCH_ALL) 460STEXI 461@item -uuid @var{uuid} 462@findex -uuid 463Set system UUID. 464ETEXI 465 466STEXI 467@end table 468ETEXI 469DEFHEADING() 470 471DEFHEADING(Block device options:) 472STEXI 473@table @option 474ETEXI 475 476DEF("fda", HAS_ARG, QEMU_OPTION_fda, 477 "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL) 478DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL) 479STEXI 480@item -fda @var{file} 481@itemx -fdb @var{file} 482@findex -fda 483@findex -fdb 484Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). 485ETEXI 486 487DEF("hda", HAS_ARG, QEMU_OPTION_hda, 488 "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL) 489DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL) 490DEF("hdc", HAS_ARG, QEMU_OPTION_hdc, 491 "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL) 492DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL) 493STEXI 494@item -hda @var{file} 495@itemx -hdb @var{file} 496@itemx -hdc @var{file} 497@itemx -hdd @var{file} 498@findex -hda 499@findex -hdb 500@findex -hdc 501@findex -hdd 502Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}). 503ETEXI 504 505DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom, 506 "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n", 507 QEMU_ARCH_ALL) 508STEXI 509@item -cdrom @var{file} 510@findex -cdrom 511Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and 512@option{-cdrom} at the same time). You can use the host CD-ROM by 513using @file{/dev/cdrom} as filename (@pxref{host_drives}). 514ETEXI 515 516DEF("drive", HAS_ARG, QEMU_OPTION_drive, 517 "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n" 518 " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n" 519 " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n" 520 " [,serial=s][,addr=A][,rerror=ignore|stop|report]\n" 521 " [,werror=ignore|stop|report|enospc][,id=name][,aio=threads|native]\n" 522 " [,readonly=on|off][,copy-on-read=on|off]\n" 523 " [,discard=ignore|unmap][,detect-zeroes=on|off|unmap]\n" 524 " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]]\n" 525 " [[,iops=i]|[[,iops_rd=r][,iops_wr=w]]]\n" 526 " [[,bps_max=bm]|[[,bps_rd_max=rm][,bps_wr_max=wm]]]\n" 527 " [[,iops_max=im]|[[,iops_rd_max=irm][,iops_wr_max=iwm]]]\n" 528 " [[,iops_size=is]]\n" 529 " [[,group=g]]\n" 530 " use 'file' as a drive image\n", QEMU_ARCH_ALL) 531STEXI 532@item -drive @var{option}[,@var{option}[,@var{option}[,...]]] 533@findex -drive 534 535Define a new drive. Valid options are: 536 537@table @option 538@item file=@var{file} 539This option defines which disk image (@pxref{disk_images}) to use with 540this drive. If the filename contains comma, you must double it 541(for instance, "file=my,,file" to use file "my,file"). 542 543Special files such as iSCSI devices can be specified using protocol 544specific URLs. See the section for "Device URL Syntax" for more information. 545@item if=@var{interface} 546This option defines on which type on interface the drive is connected. 547Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio. 548@item bus=@var{bus},unit=@var{unit} 549These options define where is connected the drive by defining the bus number and 550the unit id. 551@item index=@var{index} 552This option defines where is connected the drive by using an index in the list 553of available connectors of a given interface type. 554@item media=@var{media} 555This option defines the type of the media: disk or cdrom. 556@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}] 557These options have the same definition as they have in @option{-hdachs}. 558@item snapshot=@var{snapshot} 559@var{snapshot} is "on" or "off" and controls snapshot mode for the given drive 560(see @option{-snapshot}). 561@item cache=@var{cache} 562@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data. 563@item aio=@var{aio} 564@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO. 565@item discard=@var{discard} 566@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap}) requests are ignored or passed to the filesystem. Some machine types may not support discard requests. 567@item format=@var{format} 568Specify which disk @var{format} will be used rather than detecting 569the format. Can be used to specify format=raw to avoid interpreting 570an untrusted format header. 571@item serial=@var{serial} 572This option specifies the serial number to assign to the device. 573@item addr=@var{addr} 574Specify the controller's PCI address (if=virtio only). 575@item werror=@var{action},rerror=@var{action} 576Specify which @var{action} to take on write and read errors. Valid actions are: 577"ignore" (ignore the error and try to continue), "stop" (pause QEMU), 578"report" (report the error to the guest), "enospc" (pause QEMU only if the 579host disk is full; report the error to the guest otherwise). 580The default setting is @option{werror=enospc} and @option{rerror=report}. 581@item readonly 582Open drive @option{file} as read-only. Guest write attempts will fail. 583@item copy-on-read=@var{copy-on-read} 584@var{copy-on-read} is "on" or "off" and enables whether to copy read backing 585file sectors into the image file. 586@item detect-zeroes=@var{detect-zeroes} 587@var{detect-zeroes} is "off", "on" or "unmap" and enables the automatic 588conversion of plain zero writes by the OS to driver specific optimized 589zero write commands. You may even choose "unmap" if @var{discard} is set 590to "unmap" to allow a zero write to be converted to an UNMAP operation. 591@end table 592 593By default, the @option{cache=writeback} mode is used. It will report data 594writes as completed as soon as the data is present in the host page cache. 595This is safe as long as your guest OS makes sure to correctly flush disk caches 596where needed. If your guest OS does not handle volatile disk write caches 597correctly and your host crashes or loses power, then the guest may experience 598data corruption. 599 600For such guests, you should consider using @option{cache=writethrough}. This 601means that the host page cache will be used to read and write data, but write 602notification will be sent to the guest only after QEMU has made sure to flush 603each write to the disk. Be aware that this has a major impact on performance. 604 605The host page cache can be avoided entirely with @option{cache=none}. This will 606attempt to do disk IO directly to the guest's memory. QEMU may still perform 607an internal copy of the data. Note that this is considered a writeback mode and 608the guest OS must handle the disk write cache correctly in order to avoid data 609corruption on host crashes. 610 611The host page cache can be avoided while only sending write notifications to 612the guest when the data has been flushed to the disk using 613@option{cache=directsync}. 614 615In case you don't care about data integrity over host failures, use 616@option{cache=unsafe}. This option tells QEMU that it never needs to write any 617data to the disk but can instead keep things in cache. If anything goes wrong, 618like your host losing power, the disk storage getting disconnected accidentally, 619etc. your image will most probably be rendered unusable. When using 620the @option{-snapshot} option, unsafe caching is always used. 621 622Copy-on-read avoids accessing the same backing file sectors repeatedly and is 623useful when the backing file is over a slow network. By default copy-on-read 624is off. 625 626Instead of @option{-cdrom} you can use: 627@example 628qemu-system-i386 -drive file=file,index=2,media=cdrom 629@end example 630 631Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can 632use: 633@example 634qemu-system-i386 -drive file=file,index=0,media=disk 635qemu-system-i386 -drive file=file,index=1,media=disk 636qemu-system-i386 -drive file=file,index=2,media=disk 637qemu-system-i386 -drive file=file,index=3,media=disk 638@end example 639 640You can open an image using pre-opened file descriptors from an fd set: 641@example 642qemu-system-i386 643-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" 644-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" 645-drive file=/dev/fdset/2,index=0,media=disk 646@end example 647 648You can connect a CDROM to the slave of ide0: 649@example 650qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom 651@end example 652 653If you don't specify the "file=" argument, you define an empty drive: 654@example 655qemu-system-i386 -drive if=ide,index=1,media=cdrom 656@end example 657 658You can connect a SCSI disk with unit ID 6 on the bus #0: 659@example 660qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6 661@end example 662 663Instead of @option{-fda}, @option{-fdb}, you can use: 664@example 665qemu-system-i386 -drive file=file,index=0,if=floppy 666qemu-system-i386 -drive file=file,index=1,if=floppy 667@end example 668 669By default, @var{interface} is "ide" and @var{index} is automatically 670incremented: 671@example 672qemu-system-i386 -drive file=a -drive file=b" 673@end example 674is interpreted like: 675@example 676qemu-system-i386 -hda a -hdb b 677@end example 678ETEXI 679 680DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock, 681 "-mtdblock file use 'file' as on-board Flash memory image\n", 682 QEMU_ARCH_ALL) 683STEXI 684@item -mtdblock @var{file} 685@findex -mtdblock 686Use @var{file} as on-board Flash memory image. 687ETEXI 688 689DEF("sd", HAS_ARG, QEMU_OPTION_sd, 690 "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL) 691STEXI 692@item -sd @var{file} 693@findex -sd 694Use @var{file} as SecureDigital card image. 695ETEXI 696 697DEF("pflash", HAS_ARG, QEMU_OPTION_pflash, 698 "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL) 699STEXI 700@item -pflash @var{file} 701@findex -pflash 702Use @var{file} as a parallel flash image. 703ETEXI 704 705DEF("snapshot", 0, QEMU_OPTION_snapshot, 706 "-snapshot write to temporary files instead of disk image files\n", 707 QEMU_ARCH_ALL) 708STEXI 709@item -snapshot 710@findex -snapshot 711Write to temporary files instead of disk image files. In this case, 712the raw disk image you use is not written back. You can however force 713the write back by pressing @key{C-a s} (@pxref{disk_images}). 714ETEXI 715 716DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \ 717 "-hdachs c,h,s[,t]\n" \ 718 " force hard disk 0 physical geometry and the optional BIOS\n" \ 719 " translation (t=none or lba) (usually QEMU can guess them)\n", 720 QEMU_ARCH_ALL) 721STEXI 722@item -hdachs @var{c},@var{h},@var{s},[,@var{t}] 723@findex -hdachs 724Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <= 725@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS 726translation mode (@var{t}=none, lba or auto). Usually QEMU can guess 727all those parameters. This option is useful for old MS-DOS disk 728images. 729ETEXI 730 731DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev, 732 "-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n" 733 " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", 734 QEMU_ARCH_ALL) 735 736STEXI 737 738@item -fsdev @var{fsdriver},id=@var{id},path=@var{path},[security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] 739@findex -fsdev 740Define a new file system device. Valid options are: 741@table @option 742@item @var{fsdriver} 743This option specifies the fs driver backend to use. 744Currently "local", "handle" and "proxy" file system drivers are supported. 745@item id=@var{id} 746Specifies identifier for this device 747@item path=@var{path} 748Specifies the export path for the file system device. Files under 749this path will be available to the 9p client on the guest. 750@item security_model=@var{security_model} 751Specifies the security model to be used for this export path. 752Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". 753In "passthrough" security model, files are stored using the same 754credentials as they are created on the guest. This requires QEMU 755to run as root. In "mapped-xattr" security model, some of the file 756attributes like uid, gid, mode bits and link target are stored as 757file attributes. For "mapped-file" these attributes are stored in the 758hidden .virtfs_metadata directory. Directories exported by this security model cannot 759interact with other unix tools. "none" security model is same as 760passthrough except the sever won't report failures if it fails to 761set file attributes like ownership. Security model is mandatory 762only for local fsdriver. Other fsdrivers (like handle, proxy) don't take 763security model as a parameter. 764@item writeout=@var{writeout} 765This is an optional argument. The only supported value is "immediate". 766This means that host page cache will be used to read and write data but 767write notification will be sent to the guest only when the data has been 768reported as written by the storage subsystem. 769@item readonly 770Enables exporting 9p share as a readonly mount for guests. By default 771read-write access is given. 772@item socket=@var{socket} 773Enables proxy filesystem driver to use passed socket file for communicating 774with virtfs-proxy-helper 775@item sock_fd=@var{sock_fd} 776Enables proxy filesystem driver to use passed socket descriptor for 777communicating with virtfs-proxy-helper. Usually a helper like libvirt 778will create socketpair and pass one of the fds as sock_fd 779@end table 780 781-fsdev option is used along with -device driver "virtio-9p-pci". 782@item -device virtio-9p-pci,fsdev=@var{id},mount_tag=@var{mount_tag} 783Options for virtio-9p-pci driver are: 784@table @option 785@item fsdev=@var{id} 786Specifies the id value specified along with -fsdev option 787@item mount_tag=@var{mount_tag} 788Specifies the tag name to be used by the guest to mount this export point 789@end table 790 791ETEXI 792 793DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs, 794 "-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n" 795 " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", 796 QEMU_ARCH_ALL) 797 798STEXI 799 800@item -virtfs @var{fsdriver}[,path=@var{path}],mount_tag=@var{mount_tag}[,security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] 801@findex -virtfs 802 803The general form of a Virtual File system pass-through options are: 804@table @option 805@item @var{fsdriver} 806This option specifies the fs driver backend to use. 807Currently "local", "handle" and "proxy" file system drivers are supported. 808@item id=@var{id} 809Specifies identifier for this device 810@item path=@var{path} 811Specifies the export path for the file system device. Files under 812this path will be available to the 9p client on the guest. 813@item security_model=@var{security_model} 814Specifies the security model to be used for this export path. 815Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". 816In "passthrough" security model, files are stored using the same 817credentials as they are created on the guest. This requires QEMU 818to run as root. In "mapped-xattr" security model, some of the file 819attributes like uid, gid, mode bits and link target are stored as 820file attributes. For "mapped-file" these attributes are stored in the 821hidden .virtfs_metadata directory. Directories exported by this security model cannot 822interact with other unix tools. "none" security model is same as 823passthrough except the sever won't report failures if it fails to 824set file attributes like ownership. Security model is mandatory only 825for local fsdriver. Other fsdrivers (like handle, proxy) don't take security 826model as a parameter. 827@item writeout=@var{writeout} 828This is an optional argument. The only supported value is "immediate". 829This means that host page cache will be used to read and write data but 830write notification will be sent to the guest only when the data has been 831reported as written by the storage subsystem. 832@item readonly 833Enables exporting 9p share as a readonly mount for guests. By default 834read-write access is given. 835@item socket=@var{socket} 836Enables proxy filesystem driver to use passed socket file for 837communicating with virtfs-proxy-helper. Usually a helper like libvirt 838will create socketpair and pass one of the fds as sock_fd 839@item sock_fd 840Enables proxy filesystem driver to use passed 'sock_fd' as the socket 841descriptor for interfacing with virtfs-proxy-helper 842@end table 843ETEXI 844 845DEF("virtfs_synth", 0, QEMU_OPTION_virtfs_synth, 846 "-virtfs_synth Create synthetic file system image\n", 847 QEMU_ARCH_ALL) 848STEXI 849@item -virtfs_synth 850@findex -virtfs_synth 851Create synthetic file system image 852ETEXI 853 854STEXI 855@end table 856ETEXI 857DEFHEADING() 858 859DEFHEADING(USB options:) 860STEXI 861@table @option 862ETEXI 863 864DEF("usb", 0, QEMU_OPTION_usb, 865 "-usb enable the USB driver (will be the default soon)\n", 866 QEMU_ARCH_ALL) 867STEXI 868@item -usb 869@findex -usb 870Enable the USB driver (will be the default soon) 871ETEXI 872 873DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice, 874 "-usbdevice name add the host or guest USB device 'name'\n", 875 QEMU_ARCH_ALL) 876STEXI 877 878@item -usbdevice @var{devname} 879@findex -usbdevice 880Add the USB device @var{devname}. @xref{usb_devices}. 881 882@table @option 883 884@item mouse 885Virtual Mouse. This will override the PS/2 mouse emulation when activated. 886 887@item tablet 888Pointer device that uses absolute coordinates (like a touchscreen). This 889means QEMU is able to report the mouse position without having to grab the 890mouse. Also overrides the PS/2 mouse emulation when activated. 891 892@item disk:[format=@var{format}]:@var{file} 893Mass storage device based on file. The optional @var{format} argument 894will be used rather than detecting the format. Can be used to specify 895@code{format=raw} to avoid interpreting an untrusted format header. 896 897@item host:@var{bus}.@var{addr} 898Pass through the host device identified by @var{bus}.@var{addr} (Linux only). 899 900@item host:@var{vendor_id}:@var{product_id} 901Pass through the host device identified by @var{vendor_id}:@var{product_id} 902(Linux only). 903 904@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev} 905Serial converter to host character device @var{dev}, see @code{-serial} for the 906available devices. 907 908@item braille 909Braille device. This will use BrlAPI to display the braille output on a real 910or fake device. 911 912@item net:@var{options} 913Network adapter that supports CDC ethernet and RNDIS protocols. 914 915@end table 916ETEXI 917 918STEXI 919@end table 920ETEXI 921DEFHEADING() 922 923DEFHEADING(Display options:) 924STEXI 925@table @option 926ETEXI 927 928DEF("display", HAS_ARG, QEMU_OPTION_display, 929 "-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n" 930 " [,window_close=on|off][,gl=on|off]|curses|none|\n" 931 "-display gtk[,grab_on_hover=on|off][,gl=on|off]|\n" 932 "-display vnc=<display>[,<optargs>]\n" 933 "-display curses\n" 934 "-display none" 935 " select display type\n" 936 "The default display is equivalent to\n" 937#if defined(CONFIG_GTK) 938 "\t\"-display gtk\"\n" 939#elif defined(CONFIG_SDL) 940 "\t\"-display sdl\"\n" 941#elif defined(CONFIG_COCOA) 942 "\t\"-display cocoa\"\n" 943#elif defined(CONFIG_VNC) 944 "\t\"-vnc localhost:0,to=99,id=default\"\n" 945#else 946 "\t\"-display none\"\n" 947#endif 948 , QEMU_ARCH_ALL) 949STEXI 950@item -display @var{type} 951@findex -display 952Select type of display to use. This option is a replacement for the 953old style -sdl/-curses/... options. Valid values for @var{type} are 954@table @option 955@item sdl 956Display video output via SDL (usually in a separate graphics 957window; see the SDL documentation for other possibilities). 958@item curses 959Display video output via curses. For graphics device models which 960support a text mode, QEMU can display this output using a 961curses/ncurses interface. Nothing is displayed when the graphics 962device is in graphical mode or if the graphics device does not support 963a text mode. Generally only the VGA device models support text mode. 964@item none 965Do not display video output. The guest will still see an emulated 966graphics card, but its output will not be displayed to the QEMU 967user. This option differs from the -nographic option in that it 968only affects what is done with video output; -nographic also changes 969the destination of the serial and parallel port data. 970@item gtk 971Display video output in a GTK window. This interface provides drop-down 972menus and other UI elements to configure and control the VM during 973runtime. 974@item vnc 975Start a VNC server on display <arg> 976@end table 977ETEXI 978 979DEF("nographic", 0, QEMU_OPTION_nographic, 980 "-nographic disable graphical output and redirect serial I/Os to console\n", 981 QEMU_ARCH_ALL) 982STEXI 983@item -nographic 984@findex -nographic 985Normally, if QEMU is compiled with graphical window support, it displays 986output such as guest graphics, guest console, and the QEMU monitor in a 987window. With this option, you can totally disable graphical output so 988that QEMU is a simple command line application. The emulated serial port 989is redirected on the console and muxed with the monitor (unless 990redirected elsewhere explicitly). Therefore, you can still use QEMU to 991debug a Linux kernel with a serial console. Use @key{C-a h} for help on 992switching between the console and monitor. 993ETEXI 994 995DEF("curses", 0, QEMU_OPTION_curses, 996 "-curses shorthand for -display curses\n", 997 QEMU_ARCH_ALL) 998STEXI 999@item -curses 1000@findex -curses 1001Normally, if QEMU is compiled with graphical window support, it displays 1002output such as guest graphics, guest console, and the QEMU monitor in a 1003window. With this option, QEMU can display the VGA output when in text 1004mode using a curses/ncurses interface. Nothing is displayed in graphical 1005mode. 1006ETEXI 1007 1008DEF("no-frame", 0, QEMU_OPTION_no_frame, 1009 "-no-frame open SDL window without a frame and window decorations\n", 1010 QEMU_ARCH_ALL) 1011STEXI 1012@item -no-frame 1013@findex -no-frame 1014Do not use decorations for SDL windows and start them using the whole 1015available screen space. This makes the using QEMU in a dedicated desktop 1016workspace more convenient. 1017ETEXI 1018 1019DEF("alt-grab", 0, QEMU_OPTION_alt_grab, 1020 "-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)\n", 1021 QEMU_ARCH_ALL) 1022STEXI 1023@item -alt-grab 1024@findex -alt-grab 1025Use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt). Note that this also 1026affects the special keys (for fullscreen, monitor-mode switching, etc). 1027ETEXI 1028 1029DEF("ctrl-grab", 0, QEMU_OPTION_ctrl_grab, 1030 "-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)\n", 1031 QEMU_ARCH_ALL) 1032STEXI 1033@item -ctrl-grab 1034@findex -ctrl-grab 1035Use Right-Ctrl to grab mouse (instead of Ctrl-Alt). Note that this also 1036affects the special keys (for fullscreen, monitor-mode switching, etc). 1037ETEXI 1038 1039DEF("no-quit", 0, QEMU_OPTION_no_quit, 1040 "-no-quit disable SDL window close capability\n", QEMU_ARCH_ALL) 1041STEXI 1042@item -no-quit 1043@findex -no-quit 1044Disable SDL window close capability. 1045ETEXI 1046 1047DEF("sdl", 0, QEMU_OPTION_sdl, 1048 "-sdl shorthand for -display sdl\n", QEMU_ARCH_ALL) 1049STEXI 1050@item -sdl 1051@findex -sdl 1052Enable SDL. 1053ETEXI 1054 1055DEF("spice", HAS_ARG, QEMU_OPTION_spice, 1056 "-spice [port=port][,tls-port=secured-port][,x509-dir=<dir>]\n" 1057 " [,x509-key-file=<file>][,x509-key-password=<file>]\n" 1058 " [,x509-cert-file=<file>][,x509-cacert-file=<file>]\n" 1059 " [,x509-dh-key-file=<file>][,addr=addr][,ipv4|ipv6|unix]\n" 1060 " [,tls-ciphers=<list>]\n" 1061 " [,tls-channel=[main|display|cursor|inputs|record|playback]]\n" 1062 " [,plaintext-channel=[main|display|cursor|inputs|record|playback]]\n" 1063 " [,sasl][,password=<secret>][,disable-ticketing]\n" 1064 " [,image-compression=[auto_glz|auto_lz|quic|glz|lz|off]]\n" 1065 " [,jpeg-wan-compression=[auto|never|always]]\n" 1066 " [,zlib-glz-wan-compression=[auto|never|always]]\n" 1067 " [,streaming-video=[off|all|filter]][,disable-copy-paste]\n" 1068 " [,disable-agent-file-xfer][,agent-mouse=[on|off]]\n" 1069 " [,playback-compression=[on|off]][,seamless-migration=[on|off]]\n" 1070 " [,gl=[on|off]]\n" 1071 " enable spice\n" 1072 " at least one of {port, tls-port} is mandatory\n", 1073 QEMU_ARCH_ALL) 1074STEXI 1075@item -spice @var{option}[,@var{option}[,...]] 1076@findex -spice 1077Enable the spice remote desktop protocol. Valid options are 1078 1079@table @option 1080 1081@item port=<nr> 1082Set the TCP port spice is listening on for plaintext channels. 1083 1084@item addr=<addr> 1085Set the IP address spice is listening on. Default is any address. 1086 1087@item ipv4 1088@itemx ipv6 1089@itemx unix 1090Force using the specified IP version. 1091 1092@item password=<secret> 1093Set the password you need to authenticate. 1094 1095@item sasl 1096Require that the client use SASL to authenticate with the spice. 1097The exact choice of authentication method used is controlled from the 1098system / user's SASL configuration file for the 'qemu' service. This 1099is typically found in /etc/sasl2/qemu.conf. If running QEMU as an 1100unprivileged user, an environment variable SASL_CONF_PATH can be used 1101to make it search alternate locations for the service config. 1102While some SASL auth methods can also provide data encryption (eg GSSAPI), 1103it is recommended that SASL always be combined with the 'tls' and 1104'x509' settings to enable use of SSL and server certificates. This 1105ensures a data encryption preventing compromise of authentication 1106credentials. 1107 1108@item disable-ticketing 1109Allow client connects without authentication. 1110 1111@item disable-copy-paste 1112Disable copy paste between the client and the guest. 1113 1114@item disable-agent-file-xfer 1115Disable spice-vdagent based file-xfer between the client and the guest. 1116 1117@item tls-port=<nr> 1118Set the TCP port spice is listening on for encrypted channels. 1119 1120@item x509-dir=<dir> 1121Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir 1122 1123@item x509-key-file=<file> 1124@itemx x509-key-password=<file> 1125@itemx x509-cert-file=<file> 1126@itemx x509-cacert-file=<file> 1127@itemx x509-dh-key-file=<file> 1128The x509 file names can also be configured individually. 1129 1130@item tls-ciphers=<list> 1131Specify which ciphers to use. 1132 1133@item tls-channel=[main|display|cursor|inputs|record|playback] 1134@itemx plaintext-channel=[main|display|cursor|inputs|record|playback] 1135Force specific channel to be used with or without TLS encryption. The 1136options can be specified multiple times to configure multiple 1137channels. The special name "default" can be used to set the default 1138mode. For channels which are not explicitly forced into one mode the 1139spice client is allowed to pick tls/plaintext as he pleases. 1140 1141@item image-compression=[auto_glz|auto_lz|quic|glz|lz|off] 1142Configure image compression (lossless). 1143Default is auto_glz. 1144 1145@item jpeg-wan-compression=[auto|never|always] 1146@itemx zlib-glz-wan-compression=[auto|never|always] 1147Configure wan image compression (lossy for slow links). 1148Default is auto. 1149 1150@item streaming-video=[off|all|filter] 1151Configure video stream detection. Default is off. 1152 1153@item agent-mouse=[on|off] 1154Enable/disable passing mouse events via vdagent. Default is on. 1155 1156@item playback-compression=[on|off] 1157Enable/disable audio stream compression (using celt 0.5.1). Default is on. 1158 1159@item seamless-migration=[on|off] 1160Enable/disable spice seamless migration. Default is off. 1161 1162@item gl=[on|off] 1163Enable/disable OpenGL context. Default is off. 1164 1165@end table 1166ETEXI 1167 1168DEF("portrait", 0, QEMU_OPTION_portrait, 1169 "-portrait rotate graphical output 90 deg left (only PXA LCD)\n", 1170 QEMU_ARCH_ALL) 1171STEXI 1172@item -portrait 1173@findex -portrait 1174Rotate graphical output 90 deg left (only PXA LCD). 1175ETEXI 1176 1177DEF("rotate", HAS_ARG, QEMU_OPTION_rotate, 1178 "-rotate <deg> rotate graphical output some deg left (only PXA LCD)\n", 1179 QEMU_ARCH_ALL) 1180STEXI 1181@item -rotate @var{deg} 1182@findex -rotate 1183Rotate graphical output some deg left (only PXA LCD). 1184ETEXI 1185 1186DEF("vga", HAS_ARG, QEMU_OPTION_vga, 1187 "-vga [std|cirrus|vmware|qxl|xenfb|tcx|cg3|virtio|none]\n" 1188 " select video card type\n", QEMU_ARCH_ALL) 1189STEXI 1190@item -vga @var{type} 1191@findex -vga 1192Select type of VGA card to emulate. Valid values for @var{type} are 1193@table @option 1194@item cirrus 1195Cirrus Logic GD5446 Video card. All Windows versions starting from 1196Windows 95 should recognize and use this graphic card. For optimal 1197performances, use 16 bit color depth in the guest and the host OS. 1198(This one is the default) 1199@item std 1200Standard VGA card with Bochs VBE extensions. If your guest OS 1201supports the VESA 2.0 VBE extensions (e.g. Windows XP) and if you want 1202to use high resolution modes (>= 1280x1024x16) then you should use 1203this option. 1204@item vmware 1205VMWare SVGA-II compatible adapter. Use it if you have sufficiently 1206recent XFree86/XOrg server or Windows guest with a driver for this 1207card. 1208@item qxl 1209QXL paravirtual graphic card. It is VGA compatible (including VESA 12102.0 VBE support). Works best with qxl guest drivers installed though. 1211Recommended choice when using the spice protocol. 1212@item tcx 1213(sun4m only) Sun TCX framebuffer. This is the default framebuffer for 1214sun4m machines and offers both 8-bit and 24-bit colour depths at a 1215fixed resolution of 1024x768. 1216@item cg3 1217(sun4m only) Sun cgthree framebuffer. This is a simple 8-bit framebuffer 1218for sun4m machines available in both 1024x768 (OpenBIOS) and 1152x900 (OBP) 1219resolutions aimed at people wishing to run older Solaris versions. 1220@item virtio 1221Virtio VGA card. 1222@item none 1223Disable VGA card. 1224@end table 1225ETEXI 1226 1227DEF("full-screen", 0, QEMU_OPTION_full_screen, 1228 "-full-screen start in full screen\n", QEMU_ARCH_ALL) 1229STEXI 1230@item -full-screen 1231@findex -full-screen 1232Start in full screen. 1233ETEXI 1234 1235DEF("g", 1, QEMU_OPTION_g , 1236 "-g WxH[xDEPTH] Set the initial graphical resolution and depth\n", 1237 QEMU_ARCH_PPC | QEMU_ARCH_SPARC) 1238STEXI 1239@item -g @var{width}x@var{height}[x@var{depth}] 1240@findex -g 1241Set the initial graphical resolution and depth (PPC, SPARC only). 1242ETEXI 1243 1244DEF("vnc", HAS_ARG, QEMU_OPTION_vnc , 1245 "-vnc <display> shorthand for -display vnc=<display>\n", QEMU_ARCH_ALL) 1246STEXI 1247@item -vnc @var{display}[,@var{option}[,@var{option}[,...]]] 1248@findex -vnc 1249Normally, if QEMU is compiled with graphical window support, it displays 1250output such as guest graphics, guest console, and the QEMU monitor in a 1251window. With this option, you can have QEMU listen on VNC display 1252@var{display} and redirect the VGA display over the VNC session. It is 1253very useful to enable the usb tablet device when using this option 1254(option @option{-usbdevice tablet}). When using the VNC display, you 1255must use the @option{-k} parameter to set the keyboard layout if you are 1256not using en-us. Valid syntax for the @var{display} is 1257 1258@table @option 1259 1260@item to=@var{L} 1261 1262With this option, QEMU will try next available VNC @var{display}s, until the 1263number @var{L}, if the origianlly defined "-vnc @var{display}" is not 1264available, e.g. port 5900+@var{display} is already used by another 1265application. By default, to=0. 1266 1267@item @var{host}:@var{d} 1268 1269TCP connections will only be allowed from @var{host} on display @var{d}. 1270By convention the TCP port is 5900+@var{d}. Optionally, @var{host} can 1271be omitted in which case the server will accept connections from any host. 1272 1273@item unix:@var{path} 1274 1275Connections will be allowed over UNIX domain sockets where @var{path} is the 1276location of a unix socket to listen for connections on. 1277 1278@item none 1279 1280VNC is initialized but not started. The monitor @code{change} command 1281can be used to later start the VNC server. 1282 1283@end table 1284 1285Following the @var{display} value there may be one or more @var{option} flags 1286separated by commas. Valid options are 1287 1288@table @option 1289 1290@item reverse 1291 1292Connect to a listening VNC client via a ``reverse'' connection. The 1293client is specified by the @var{display}. For reverse network 1294connections (@var{host}:@var{d},@code{reverse}), the @var{d} argument 1295is a TCP port number, not a display number. 1296 1297@item websocket 1298 1299Opens an additional TCP listening port dedicated to VNC Websocket connections. 1300By definition the Websocket port is 5700+@var{display}. If @var{host} is 1301specified connections will only be allowed from this host. 1302As an alternative the Websocket port could be specified by using 1303@code{websocket}=@var{port}. 1304If no TLS credentials are provided, the websocket connection runs in 1305unencrypted mode. If TLS credentials are provided, the websocket connection 1306requires encrypted client connections. 1307 1308@item password 1309 1310Require that password based authentication is used for client connections. 1311 1312The password must be set separately using the @code{set_password} command in 1313the @ref{pcsys_monitor}. The syntax to change your password is: 1314@code{set_password <protocol> <password>} where <protocol> could be either 1315"vnc" or "spice". 1316 1317If you would like to change <protocol> password expiration, you should use 1318@code{expire_password <protocol> <expiration-time>} where expiration time could 1319be one of the following options: now, never, +seconds or UNIX time of 1320expiration, e.g. +60 to make password expire in 60 seconds, or 1335196800 1321to make password expire on "Mon Apr 23 12:00:00 EDT 2012" (UNIX time for this 1322date and time). 1323 1324You can also use keywords "now" or "never" for the expiration time to 1325allow <protocol> password to expire immediately or never expire. 1326 1327@item tls-creds=@var{ID} 1328 1329Provides the ID of a set of TLS credentials to use to secure the 1330VNC server. They will apply to both the normal VNC server socket 1331and the websocket socket (if enabled). Setting TLS credentials 1332will cause the VNC server socket to enable the VeNCrypt auth 1333mechanism. The credentials should have been previously created 1334using the @option{-object tls-creds} argument. 1335 1336The @option{tls-creds} parameter obsoletes the @option{tls}, 1337@option{x509}, and @option{x509verify} options, and as such 1338it is not permitted to set both new and old type options at 1339the same time. 1340 1341@item tls 1342 1343Require that client use TLS when communicating with the VNC server. This 1344uses anonymous TLS credentials so is susceptible to a man-in-the-middle 1345attack. It is recommended that this option be combined with either the 1346@option{x509} or @option{x509verify} options. 1347 1348This option is now deprecated in favor of using the @option{tls-creds} 1349argument. 1350 1351@item x509=@var{/path/to/certificate/dir} 1352 1353Valid if @option{tls} is specified. Require that x509 credentials are used 1354for negotiating the TLS session. The server will send its x509 certificate 1355to the client. It is recommended that a password be set on the VNC server 1356to provide authentication of the client when this is used. The path following 1357this option specifies where the x509 certificates are to be loaded from. 1358See the @ref{vnc_security} section for details on generating certificates. 1359 1360This option is now deprecated in favour of using the @option{tls-creds} 1361argument. 1362 1363@item x509verify=@var{/path/to/certificate/dir} 1364 1365Valid if @option{tls} is specified. Require that x509 credentials are used 1366for negotiating the TLS session. The server will send its x509 certificate 1367to the client, and request that the client send its own x509 certificate. 1368The server will validate the client's certificate against the CA certificate, 1369and reject clients when validation fails. If the certificate authority is 1370trusted, this is a sufficient authentication mechanism. You may still wish 1371to set a password on the VNC server as a second authentication layer. The 1372path following this option specifies where the x509 certificates are to 1373be loaded from. See the @ref{vnc_security} section for details on generating 1374certificates. 1375 1376This option is now deprecated in favour of using the @option{tls-creds} 1377argument. 1378 1379@item sasl 1380 1381Require that the client use SASL to authenticate with the VNC server. 1382The exact choice of authentication method used is controlled from the 1383system / user's SASL configuration file for the 'qemu' service. This 1384is typically found in /etc/sasl2/qemu.conf. If running QEMU as an 1385unprivileged user, an environment variable SASL_CONF_PATH can be used 1386to make it search alternate locations for the service config. 1387While some SASL auth methods can also provide data encryption (eg GSSAPI), 1388it is recommended that SASL always be combined with the 'tls' and 1389'x509' settings to enable use of SSL and server certificates. This 1390ensures a data encryption preventing compromise of authentication 1391credentials. See the @ref{vnc_security} section for details on using 1392SASL authentication. 1393 1394@item acl 1395 1396Turn on access control lists for checking of the x509 client certificate 1397and SASL party. For x509 certs, the ACL check is made against the 1398certificate's distinguished name. This is something that looks like 1399@code{C=GB,O=ACME,L=Boston,CN=bob}. For SASL party, the ACL check is 1400made against the username, which depending on the SASL plugin, may 1401include a realm component, eg @code{bob} or @code{bob@@EXAMPLE.COM}. 1402When the @option{acl} flag is set, the initial access list will be 1403empty, with a @code{deny} policy. Thus no one will be allowed to 1404use the VNC server until the ACLs have been loaded. This can be 1405achieved using the @code{acl} monitor command. 1406 1407@item lossy 1408 1409Enable lossy compression methods (gradient, JPEG, ...). If this 1410option is set, VNC client may receive lossy framebuffer updates 1411depending on its encoding settings. Enabling this option can save 1412a lot of bandwidth at the expense of quality. 1413 1414@item non-adaptive 1415 1416Disable adaptive encodings. Adaptive encodings are enabled by default. 1417An adaptive encoding will try to detect frequently updated screen regions, 1418and send updates in these regions using a lossy encoding (like JPEG). 1419This can be really helpful to save bandwidth when playing videos. Disabling 1420adaptive encodings restores the original static behavior of encodings 1421like Tight. 1422 1423@item share=[allow-exclusive|force-shared|ignore] 1424 1425Set display sharing policy. 'allow-exclusive' allows clients to ask 1426for exclusive access. As suggested by the rfb spec this is 1427implemented by dropping other connections. Connecting multiple 1428clients in parallel requires all clients asking for a shared session 1429(vncviewer: -shared switch). This is the default. 'force-shared' 1430disables exclusive client access. Useful for shared desktop sessions, 1431where you don't want someone forgetting specify -shared disconnect 1432everybody else. 'ignore' completely ignores the shared flag and 1433allows everybody connect unconditionally. Doesn't conform to the rfb 1434spec but is traditional QEMU behavior. 1435 1436@item key-delay-ms 1437 1438Set keyboard delay, for key down and key up events, in milliseconds. 1439Default is 1. Keyboards are low-bandwidth devices, so this slowdown 1440can help the device and guest to keep up and not lose events in case 1441events are arriving in bulk. Possible causes for the latter are flaky 1442network connections, or scripts for automated testing. 1443 1444@end table 1445ETEXI 1446 1447STEXI 1448@end table 1449ETEXI 1450ARCHHEADING(, QEMU_ARCH_I386) 1451 1452ARCHHEADING(i386 target only:, QEMU_ARCH_I386) 1453STEXI 1454@table @option 1455ETEXI 1456 1457DEF("win2k-hack", 0, QEMU_OPTION_win2k_hack, 1458 "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n", 1459 QEMU_ARCH_I386) 1460STEXI 1461@item -win2k-hack 1462@findex -win2k-hack 1463Use it when installing Windows 2000 to avoid a disk full bug. After 1464Windows 2000 is installed, you no longer need this option (this option 1465slows down the IDE transfers). 1466ETEXI 1467 1468HXCOMM Deprecated by -rtc 1469DEF("rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack, "", QEMU_ARCH_I386) 1470 1471DEF("no-fd-bootchk", 0, QEMU_OPTION_no_fd_bootchk, 1472 "-no-fd-bootchk disable boot signature checking for floppy disks\n", 1473 QEMU_ARCH_I386) 1474STEXI 1475@item -no-fd-bootchk 1476@findex -no-fd-bootchk 1477Disable boot signature checking for floppy disks in BIOS. May 1478be needed to boot from old floppy disks. 1479ETEXI 1480 1481DEF("no-acpi", 0, QEMU_OPTION_no_acpi, 1482 "-no-acpi disable ACPI\n", QEMU_ARCH_I386 | QEMU_ARCH_ARM) 1483STEXI 1484@item -no-acpi 1485@findex -no-acpi 1486Disable ACPI (Advanced Configuration and Power Interface) support. Use 1487it if your guest OS complains about ACPI problems (PC target machine 1488only). 1489ETEXI 1490 1491DEF("no-hpet", 0, QEMU_OPTION_no_hpet, 1492 "-no-hpet disable HPET\n", QEMU_ARCH_I386) 1493STEXI 1494@item -no-hpet 1495@findex -no-hpet 1496Disable HPET support. 1497ETEXI 1498 1499DEF("acpitable", HAS_ARG, QEMU_OPTION_acpitable, 1500 "-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]\n" 1501 " ACPI table description\n", QEMU_ARCH_I386) 1502STEXI 1503@item -acpitable [sig=@var{str}][,rev=@var{n}][,oem_id=@var{str}][,oem_table_id=@var{str}][,oem_rev=@var{n}] [,asl_compiler_id=@var{str}][,asl_compiler_rev=@var{n}][,data=@var{file1}[:@var{file2}]...] 1504@findex -acpitable 1505Add ACPI table with specified header fields and context from specified files. 1506For file=, take whole ACPI table from the specified files, including all 1507ACPI headers (possible overridden by other options). 1508For data=, only data 1509portion of the table is used, all header information is specified in the 1510command line. 1511If a SLIC table is supplied to QEMU, then the SLIC's oem_id and oem_table_id 1512fields will override the same in the RSDT and the FADT (a.k.a. FACP), in order 1513to ensure the field matches required by the Microsoft SLIC spec and the ACPI 1514spec. 1515ETEXI 1516 1517DEF("smbios", HAS_ARG, QEMU_OPTION_smbios, 1518 "-smbios file=binary\n" 1519 " load SMBIOS entry from binary file\n" 1520 "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]\n" 1521 " [,uefi=on|off]\n" 1522 " specify SMBIOS type 0 fields\n" 1523 "-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]\n" 1524 " [,uuid=uuid][,sku=str][,family=str]\n" 1525 " specify SMBIOS type 1 fields\n" 1526 "-smbios type=2[,manufacturer=str][,product=str][,version=str][,serial=str]\n" 1527 " [,asset=str][,location=str]\n" 1528 " specify SMBIOS type 2 fields\n" 1529 "-smbios type=3[,manufacturer=str][,version=str][,serial=str][,asset=str]\n" 1530 " [,sku=str]\n" 1531 " specify SMBIOS type 3 fields\n" 1532 "-smbios type=4[,sock_pfx=str][,manufacturer=str][,version=str][,serial=str]\n" 1533 " [,asset=str][,part=str]\n" 1534 " specify SMBIOS type 4 fields\n" 1535 "-smbios type=17[,loc_pfx=str][,bank=str][,manufacturer=str][,serial=str]\n" 1536 " [,asset=str][,part=str][,speed=%d]\n" 1537 " specify SMBIOS type 17 fields\n", 1538 QEMU_ARCH_I386 | QEMU_ARCH_ARM) 1539STEXI 1540@item -smbios file=@var{binary} 1541@findex -smbios 1542Load SMBIOS entry from binary file. 1543 1544@item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}][,uefi=on|off] 1545Specify SMBIOS type 0 fields 1546 1547@item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}][,family=@var{str}] 1548Specify SMBIOS type 1 fields 1549 1550@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}][,family=@var{str}] 1551Specify SMBIOS type 2 fields 1552 1553@item -smbios type=3[,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,sku=@var{str}] 1554Specify SMBIOS type 3 fields 1555 1556@item -smbios type=4[,sock_pfx=@var{str}][,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,part=@var{str}] 1557Specify SMBIOS type 4 fields 1558 1559@item -smbios type=17[,loc_pfx=@var{str}][,bank=@var{str}][,manufacturer=@var{str}][,serial=@var{str}][,asset=@var{str}][,part=@var{str}][,speed=@var{%d}] 1560Specify SMBIOS type 17 fields 1561ETEXI 1562 1563STEXI 1564@end table 1565ETEXI 1566DEFHEADING() 1567 1568DEFHEADING(Network options:) 1569STEXI 1570@table @option 1571ETEXI 1572 1573HXCOMM Legacy slirp options (now moved to -net user): 1574#ifdef CONFIG_SLIRP 1575DEF("tftp", HAS_ARG, QEMU_OPTION_tftp, "", QEMU_ARCH_ALL) 1576DEF("bootp", HAS_ARG, QEMU_OPTION_bootp, "", QEMU_ARCH_ALL) 1577DEF("redir", HAS_ARG, QEMU_OPTION_redir, "", QEMU_ARCH_ALL) 1578#ifndef _WIN32 1579DEF("smb", HAS_ARG, QEMU_OPTION_smb, "", QEMU_ARCH_ALL) 1580#endif 1581#endif 1582 1583DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, 1584#ifdef CONFIG_SLIRP 1585 "-netdev user,id=str[,ipv4[=on|off]][,net=addr[/mask]][,host=addr]\n" 1586 " [,ipv6[=on|off]][,ipv6-net=addr[/int]][,ipv6-host=addr]\n" 1587 " [,restrict=on|off][,hostname=host][,dhcpstart=addr]\n" 1588 " [,dns=addr][,ipv6-dns=addr][,dnssearch=domain][,tftp=dir]\n" 1589 " [,bootfile=f][,hostfwd=rule][,guestfwd=rule]" 1590#ifndef _WIN32 1591 "[,smb=dir[,smbserver=addr]]\n" 1592#endif 1593 " configure a user mode network backend with ID 'str',\n" 1594 " its DHCP server and optional services\n" 1595#endif 1596#ifdef _WIN32 1597 "-netdev tap,id=str,ifname=name\n" 1598 " configure a host TAP network backend with ID 'str'\n" 1599#else 1600 "-netdev tap,id=str[,fd=h][,fds=x:y:...:z][,ifname=name][,script=file][,downscript=dfile]\n" 1601 " [,br=bridge][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off]\n" 1602 " [,vhostfd=h][,vhostfds=x:y:...:z][,vhostforce=on|off][,queues=n]\n" 1603 " [,poll-us=n]\n" 1604 " configure a host TAP network backend with ID 'str'\n" 1605 " connected to a bridge (default=" DEFAULT_BRIDGE_INTERFACE ")\n" 1606 " use network scripts 'file' (default=" DEFAULT_NETWORK_SCRIPT ")\n" 1607 " to configure it and 'dfile' (default=" DEFAULT_NETWORK_DOWN_SCRIPT ")\n" 1608 " to deconfigure it\n" 1609 " use '[down]script=no' to disable script execution\n" 1610 " use network helper 'helper' (default=" DEFAULT_BRIDGE_HELPER ") to\n" 1611 " configure it\n" 1612 " use 'fd=h' to connect to an already opened TAP interface\n" 1613 " use 'fds=x:y:...:z' to connect to already opened multiqueue capable TAP interfaces\n" 1614 " use 'sndbuf=nbytes' to limit the size of the send buffer (the\n" 1615 " default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')\n" 1616 " use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag\n" 1617 " use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition\n" 1618 " use vhost=on to enable experimental in kernel accelerator\n" 1619 " (only has effect for virtio guests which use MSIX)\n" 1620 " use vhostforce=on to force vhost on for non-MSIX virtio guests\n" 1621 " use 'vhostfd=h' to connect to an already opened vhost net device\n" 1622 " use 'vhostfds=x:y:...:z to connect to multiple already opened vhost net devices\n" 1623 " use 'queues=n' to specify the number of queues to be created for multiqueue TAP\n" 1624 " use 'poll-us=n' to speciy the maximum number of microseconds that could be\n" 1625 " spent on busy polling for vhost net\n" 1626 "-netdev bridge,id=str[,br=bridge][,helper=helper]\n" 1627 " configure a host TAP network backend with ID 'str' that is\n" 1628 " connected to a bridge (default=" DEFAULT_BRIDGE_INTERFACE ")\n" 1629 " using the program 'helper (default=" DEFAULT_BRIDGE_HELPER ")\n" 1630#endif 1631#ifdef __linux__ 1632 "-netdev l2tpv3,id=str,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport]\n" 1633 " [,rxsession=rxsession],txsession=txsession[,ipv6=on/off][,udp=on/off]\n" 1634 " [,cookie64=on/off][,counter][,pincounter][,txcookie=txcookie]\n" 1635 " [,rxcookie=rxcookie][,offset=offset]\n" 1636 " configure a network backend with ID 'str' connected to\n" 1637 " an Ethernet over L2TPv3 pseudowire.\n" 1638 " Linux kernel 3.3+ as well as most routers can talk\n" 1639 " L2TPv3. This transport allows connecting a VM to a VM,\n" 1640 " VM to a router and even VM to Host. It is a nearly-universal\n" 1641 " standard (RFC3391). Note - this implementation uses static\n" 1642 " pre-configured tunnels (same as the Linux kernel).\n" 1643 " use 'src=' to specify source address\n" 1644 " use 'dst=' to specify destination address\n" 1645 " use 'udp=on' to specify udp encapsulation\n" 1646 " use 'srcport=' to specify source udp port\n" 1647 " use 'dstport=' to specify destination udp port\n" 1648 " use 'ipv6=on' to force v6\n" 1649 " L2TPv3 uses cookies to prevent misconfiguration as\n" 1650 " well as a weak security measure\n" 1651 " use 'rxcookie=0x012345678' to specify a rxcookie\n" 1652 " use 'txcookie=0x012345678' to specify a txcookie\n" 1653 " use 'cookie64=on' to set cookie size to 64 bit, otherwise 32\n" 1654 " use 'counter=off' to force a 'cut-down' L2TPv3 with no counter\n" 1655 " use 'pincounter=on' to work around broken counter handling in peer\n" 1656 " use 'offset=X' to add an extra offset between header and data\n" 1657#endif 1658 "-netdev socket,id=str[,fd=h][,listen=[host]:port][,connect=host:port]\n" 1659 " configure a network backend to connect to another network\n" 1660 " using a socket connection\n" 1661 "-netdev socket,id=str[,fd=h][,mcast=maddr:port[,localaddr=addr]]\n" 1662 " configure a network backend to connect to a multicast maddr and port\n" 1663 " use 'localaddr=addr' to specify the host address to send packets from\n" 1664 "-netdev socket,id=str[,fd=h][,udp=host:port][,localaddr=host:port]\n" 1665 " configure a network backend to connect to another network\n" 1666 " using an UDP tunnel\n" 1667#ifdef CONFIG_VDE 1668 "-netdev vde,id=str[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n" 1669 " configure a network backend to connect to port 'n' of a vde switch\n" 1670 " running on host and listening for incoming connections on 'socketpath'.\n" 1671 " Use group 'groupname' and mode 'octalmode' to change default\n" 1672 " ownership and permissions for communication port.\n" 1673#endif 1674#ifdef CONFIG_NETMAP 1675 "-netdev netmap,id=str,ifname=name[,devname=nmname]\n" 1676 " attach to the existing netmap-enabled network interface 'name', or to a\n" 1677 " VALE port (created on the fly) called 'name' ('nmname' is name of the \n" 1678 " netmap device, defaults to '/dev/netmap')\n" 1679#endif 1680 "-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]\n" 1681 " configure a vhost-user network, backed by a chardev 'dev'\n" 1682 "-netdev hubport,id=str,hubid=n\n" 1683 " configure a hub port on QEMU VLAN 'n'\n", QEMU_ARCH_ALL) 1684DEF("net", HAS_ARG, QEMU_OPTION_net, 1685 "-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n" 1686 " old way to create a new NIC and connect it to VLAN 'n'\n" 1687 " (use the '-device devtype,netdev=str' option if possible instead)\n" 1688 "-net dump[,vlan=n][,file=f][,len=n]\n" 1689 " dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n" 1690 "-net none use it alone to have zero network devices. If no -net option\n" 1691 " is provided, the default is '-net nic -net user'\n" 1692 "-net [" 1693#ifdef CONFIG_SLIRP 1694 "user|" 1695#endif 1696 "tap|" 1697 "bridge|" 1698#ifdef CONFIG_VDE 1699 "vde|" 1700#endif 1701#ifdef CONFIG_NETMAP 1702 "netmap|" 1703#endif 1704 "socket][,vlan=n][,option][,option][,...]\n" 1705 " old way to initialize a host network interface\n" 1706 " (use the -netdev option if possible instead)\n", QEMU_ARCH_ALL) 1707STEXI 1708@item -net nic[,vlan=@var{n}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}] 1709@findex -net 1710Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n} 1711= 0 is the default). The NIC is an e1000 by default on the PC 1712target. Optionally, the MAC address can be changed to @var{mac}, the 1713device address set to @var{addr} (PCI cards only), 1714and a @var{name} can be assigned for use in monitor commands. 1715Optionally, for PCI cards, you can specify the number @var{v} of MSI-X vectors 1716that the card should have; this option currently only affects virtio cards; set 1717@var{v} = 0 to disable MSI-X. If no @option{-net} option is specified, a single 1718NIC is created. QEMU can emulate several different models of network card. 1719Valid values for @var{type} are 1720@code{virtio}, @code{i82551}, @code{i82557b}, @code{i82559er}, 1721@code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139}, 1722@code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}. 1723Not all devices are supported on all targets. Use @code{-net nic,model=help} 1724for a list of available devices for your target. 1725 1726@item -netdev user,id=@var{id}[,@var{option}][,@var{option}][,...] 1727@findex -netdev 1728@item -net user[,@var{option}][,@var{option}][,...] 1729Use the user mode network stack which requires no administrator 1730privilege to run. Valid options are: 1731 1732@table @option 1733@item vlan=@var{n} 1734Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default). 1735 1736@item id=@var{id} 1737@itemx name=@var{name} 1738Assign symbolic name for use in monitor commands. 1739 1740@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must 1741be enabled. If neither is specified both protocols are enabled. 1742 1743@item net=@var{addr}[/@var{mask}] 1744Set IP network address the guest will see. Optionally specify the netmask, 1745either in the form a.b.c.d or as number of valid top-most bits. Default is 174610.0.2.0/24. 1747 1748@item host=@var{addr} 1749Specify the guest-visible address of the host. Default is the 2nd IP in the 1750guest network, i.e. x.x.x.2. 1751 1752@item ipv6-net=@var{addr}[/@var{int}] 1753Set IPv6 network address the guest will see (default is fec0::/64). The 1754network prefix is given in the usual hexadecimal IPv6 address 1755notation. The prefix size is optional, and is given as the number of 1756valid top-most bits (default is 64). 1757 1758@item ipv6-host=@var{addr} 1759Specify the guest-visible IPv6 address of the host. Default is the 2nd IPv6 in 1760the guest network, i.e. xxxx::2. 1761 1762@item restrict=on|off 1763If this option is enabled, the guest will be isolated, i.e. it will not be 1764able to contact the host and no guest IP packets will be routed over the host 1765to the outside. This option does not affect any explicitly set forwarding rules. 1766 1767@item hostname=@var{name} 1768Specifies the client hostname reported by the built-in DHCP server. 1769 1770@item dhcpstart=@var{addr} 1771Specify the first of the 16 IPs the built-in DHCP server can assign. Default 1772is the 15th to 31st IP in the guest network, i.e. x.x.x.15 to x.x.x.31. 1773 1774@item dns=@var{addr} 1775Specify the guest-visible address of the virtual nameserver. The address must 1776be different from the host address. Default is the 3rd IP in the guest network, 1777i.e. x.x.x.3. 1778 1779@item ipv6-dns=@var{addr} 1780Specify the guest-visible address of the IPv6 virtual nameserver. The address 1781must be different from the host address. Default is the 3rd IP in the guest 1782network, i.e. xxxx::3. 1783 1784@item dnssearch=@var{domain} 1785Provides an entry for the domain-search list sent by the built-in 1786DHCP server. More than one domain suffix can be transmitted by specifying 1787this option multiple times. If supported, this will cause the guest to 1788automatically try to append the given domain suffix(es) in case a domain name 1789can not be resolved. 1790 1791Example: 1792@example 1793qemu -net user,dnssearch=mgmt.example.org,dnssearch=example.org [...] 1794@end example 1795 1796@item tftp=@var{dir} 1797When using the user mode network stack, activate a built-in TFTP 1798server. The files in @var{dir} will be exposed as the root of a TFTP server. 1799The TFTP client on the guest must be configured in binary mode (use the command 1800@code{bin} of the Unix TFTP client). 1801 1802@item bootfile=@var{file} 1803When using the user mode network stack, broadcast @var{file} as the BOOTP 1804filename. In conjunction with @option{tftp}, this can be used to network boot 1805a guest from a local directory. 1806 1807Example (using pxelinux): 1808@example 1809qemu-system-i386 -hda linux.img -boot n -net user,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 1810@end example 1811 1812@item smb=@var{dir}[,smbserver=@var{addr}] 1813When using the user mode network stack, activate a built-in SMB 1814server so that Windows OSes can access to the host files in @file{@var{dir}} 1815transparently. The IP address of the SMB server can be set to @var{addr}. By 1816default the 4th IP in the guest network is used, i.e. x.x.x.4. 1817 1818In the guest Windows OS, the line: 1819@example 182010.0.2.4 smbserver 1821@end example 1822must be added in the file @file{C:\WINDOWS\LMHOSTS} (for windows 9x/Me) 1823or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows NT/2000). 1824 1825Then @file{@var{dir}} can be accessed in @file{\\smbserver\qemu}. 1826 1827Note that a SAMBA server must be installed on the host OS. 1828QEMU was tested successfully with smbd versions from Red Hat 9, 1829Fedora Core 3 and OpenSUSE 11.x. 1830 1831@item hostfwd=[tcp|udp]:[@var{hostaddr}]:@var{hostport}-[@var{guestaddr}]:@var{guestport} 1832Redirect incoming TCP or UDP connections to the host port @var{hostport} to 1833the guest IP address @var{guestaddr} on guest port @var{guestport}. If 1834@var{guestaddr} is not specified, its value is x.x.x.15 (default first address 1835given by the built-in DHCP server). By specifying @var{hostaddr}, the rule can 1836be bound to a specific host interface. If no connection type is set, TCP is 1837used. This option can be given multiple times. 1838 1839For example, to redirect host X11 connection from screen 1 to guest 1840screen 0, use the following: 1841 1842@example 1843# on the host 1844qemu-system-i386 -net user,hostfwd=tcp:127.0.0.1:6001-:6000 [...] 1845# this host xterm should open in the guest X11 server 1846xterm -display :1 1847@end example 1848 1849To redirect telnet connections from host port 5555 to telnet port on 1850the guest, use the following: 1851 1852@example 1853# on the host 1854qemu-system-i386 -net user,hostfwd=tcp::5555-:23 [...] 1855telnet localhost 5555 1856@end example 1857 1858Then when you use on the host @code{telnet localhost 5555}, you 1859connect to the guest telnet server. 1860 1861@item guestfwd=[tcp]:@var{server}:@var{port}-@var{dev} 1862@itemx guestfwd=[tcp]:@var{server}:@var{port}-@var{cmd:command} 1863Forward guest TCP connections to the IP address @var{server} on port @var{port} 1864to the character device @var{dev} or to a program executed by @var{cmd:command} 1865which gets spawned for each connection. This option can be given multiple times. 1866 1867You can either use a chardev directly and have that one used throughout QEMU's 1868lifetime, like in the following example: 1869 1870@example 1871# open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever 1872# the guest accesses it 1873qemu -net user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321 [...] 1874@end example 1875 1876Or you can execute a command on every TCP connection established by the guest, 1877so that QEMU behaves similar to an inetd process for that virtual server: 1878 1879@example 1880# call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234 1881# and connect the TCP stream to its stdin/stdout 1882qemu -net 'user,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321' 1883@end example 1884 1885@end table 1886 1887Note: Legacy stand-alone options -tftp, -bootp, -smb and -redir are still 1888processed and applied to -net user. Mixing them with the new configuration 1889syntax gives undefined results. Their use for new applications is discouraged 1890as they will be removed from future versions. 1891 1892@item -netdev tap,id=@var{id}[,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,br=@var{bridge}][,helper=@var{helper}] 1893@itemx -net tap[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,br=@var{bridge}][,helper=@var{helper}] 1894Connect the host TAP network interface @var{name} to VLAN @var{n}. 1895 1896Use the network script @var{file} to configure it and the network script 1897@var{dfile} to deconfigure it. If @var{name} is not provided, the OS 1898automatically provides one. The default network configure script is 1899@file{/etc/qemu-ifup} and the default network deconfigure script is 1900@file{/etc/qemu-ifdown}. Use @option{script=no} or @option{downscript=no} 1901to disable script execution. 1902 1903If running QEMU as an unprivileged user, use the network helper 1904@var{helper} to configure the TAP interface and attach it to the bridge. 1905The default network helper executable is @file{/path/to/qemu-bridge-helper} 1906and the default bridge device is @file{br0}. 1907 1908@option{fd}=@var{h} can be used to specify the handle of an already 1909opened host TAP interface. 1910 1911Examples: 1912 1913@example 1914#launch a QEMU instance with the default network script 1915qemu-system-i386 linux.img -net nic -net tap 1916@end example 1917 1918@example 1919#launch a QEMU instance with two NICs, each one connected 1920#to a TAP device 1921qemu-system-i386 linux.img \ 1922 -net nic,vlan=0 -net tap,vlan=0,ifname=tap0 \ 1923 -net nic,vlan=1 -net tap,vlan=1,ifname=tap1 1924@end example 1925 1926@example 1927#launch a QEMU instance with the default network helper to 1928#connect a TAP device to bridge br0 1929qemu-system-i386 linux.img \ 1930 -net nic -net tap,"helper=/path/to/qemu-bridge-helper" 1931@end example 1932 1933@item -netdev bridge,id=@var{id}[,br=@var{bridge}][,helper=@var{helper}] 1934@itemx -net bridge[,vlan=@var{n}][,name=@var{name}][,br=@var{bridge}][,helper=@var{helper}] 1935Connect a host TAP network interface to a host bridge device. 1936 1937Use the network helper @var{helper} to configure the TAP interface and 1938attach it to the bridge. The default network helper executable is 1939@file{/path/to/qemu-bridge-helper} and the default bridge 1940device is @file{br0}. 1941 1942Examples: 1943 1944@example 1945#launch a QEMU instance with the default network helper to 1946#connect a TAP device to bridge br0 1947qemu-system-i386 linux.img -net bridge -net nic,model=virtio 1948@end example 1949 1950@example 1951#launch a QEMU instance with the default network helper to 1952#connect a TAP device to bridge qemubr0 1953qemu-system-i386 linux.img -net bridge,br=qemubr0 -net nic,model=virtio 1954@end example 1955 1956@item -netdev socket,id=@var{id}[,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] 1957@itemx -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}] [,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] 1958 1959Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual 1960machine using a TCP socket connection. If @option{listen} is 1961specified, QEMU waits for incoming connections on @var{port} 1962(@var{host} is optional). @option{connect} is used to connect to 1963another QEMU instance using the @option{listen} option. @option{fd}=@var{h} 1964specifies an already opened TCP socket. 1965 1966Example: 1967@example 1968# launch a first QEMU instance 1969qemu-system-i386 linux.img \ 1970 -net nic,macaddr=52:54:00:12:34:56 \ 1971 -net socket,listen=:1234 1972# connect the VLAN 0 of this instance to the VLAN 0 1973# of the first instance 1974qemu-system-i386 linux.img \ 1975 -net nic,macaddr=52:54:00:12:34:57 \ 1976 -net socket,connect=127.0.0.1:1234 1977@end example 1978 1979@item -netdev socket,id=@var{id}[,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] 1980@itemx -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] 1981 1982Create a VLAN @var{n} shared with another QEMU virtual 1983machines using a UDP multicast socket, effectively making a bus for 1984every QEMU with same multicast address @var{maddr} and @var{port}. 1985NOTES: 1986@enumerate 1987@item 1988Several QEMU can be running on different hosts and share same bus (assuming 1989correct multicast setup for these hosts). 1990@item 1991mcast support is compatible with User Mode Linux (argument @option{eth@var{N}=mcast}), see 1992@url{http://user-mode-linux.sf.net}. 1993@item 1994Use @option{fd=h} to specify an already opened UDP multicast socket. 1995@end enumerate 1996 1997Example: 1998@example 1999# launch one QEMU instance 2000qemu-system-i386 linux.img \ 2001 -net nic,macaddr=52:54:00:12:34:56 \ 2002 -net socket,mcast=230.0.0.1:1234 2003# launch another QEMU instance on same "bus" 2004qemu-system-i386 linux.img \ 2005 -net nic,macaddr=52:54:00:12:34:57 \ 2006 -net socket,mcast=230.0.0.1:1234 2007# launch yet another QEMU instance on same "bus" 2008qemu-system-i386 linux.img \ 2009 -net nic,macaddr=52:54:00:12:34:58 \ 2010 -net socket,mcast=230.0.0.1:1234 2011@end example 2012 2013Example (User Mode Linux compat.): 2014@example 2015# launch QEMU instance (note mcast address selected 2016# is UML's default) 2017qemu-system-i386 linux.img \ 2018 -net nic,macaddr=52:54:00:12:34:56 \ 2019 -net socket,mcast=239.192.168.1:1102 2020# launch UML 2021/path/to/linux ubd0=/path/to/root_fs eth0=mcast 2022@end example 2023 2024Example (send packets from host's 1.2.3.4): 2025@example 2026qemu-system-i386 linux.img \ 2027 -net nic,macaddr=52:54:00:12:34:56 \ 2028 -net socket,mcast=239.192.168.1:1102,localaddr=1.2.3.4 2029@end example 2030 2031@item -netdev l2tpv3,id=@var{id},src=@var{srcaddr},dst=@var{dstaddr}[,srcport=@var{srcport}][,dstport=@var{dstport}],txsession=@var{txsession}[,rxsession=@var{rxsession}][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=@var{txcookie}][,rxcookie=@var{rxcookie}][,offset=@var{offset}] 2032@itemx -net l2tpv3[,vlan=@var{n}][,name=@var{name}],src=@var{srcaddr},dst=@var{dstaddr}[,srcport=@var{srcport}][,dstport=@var{dstport}],txsession=@var{txsession}[,rxsession=@var{rxsession}][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=@var{txcookie}][,rxcookie=@var{rxcookie}][,offset=@var{offset}] 2033Connect VLAN @var{n} to L2TPv3 pseudowire. L2TPv3 (RFC3391) is a popular 2034protocol to transport Ethernet (and other Layer 2) data frames between 2035two systems. It is present in routers, firewalls and the Linux kernel 2036(from version 3.3 onwards). 2037 2038This transport allows a VM to communicate to another VM, router or firewall directly. 2039 2040@item src=@var{srcaddr} 2041 source address (mandatory) 2042@item dst=@var{dstaddr} 2043 destination address (mandatory) 2044@item udp 2045 select udp encapsulation (default is ip). 2046@item srcport=@var{srcport} 2047 source udp port. 2048@item dstport=@var{dstport} 2049 destination udp port. 2050@item ipv6 2051 force v6, otherwise defaults to v4. 2052@item rxcookie=@var{rxcookie} 2053@itemx txcookie=@var{txcookie} 2054 Cookies are a weak form of security in the l2tpv3 specification. 2055Their function is mostly to prevent misconfiguration. By default they are 32 2056bit. 2057@item cookie64 2058 Set cookie size to 64 bit instead of the default 32 2059@item counter=off 2060 Force a 'cut-down' L2TPv3 with no counter as in 2061draft-mkonstan-l2tpext-keyed-ipv6-tunnel-00 2062@item pincounter=on 2063 Work around broken counter handling in peer. This may also help on 2064networks which have packet reorder. 2065@item offset=@var{offset} 2066 Add an extra offset between header and data 2067 2068For example, to attach a VM running on host 4.3.2.1 via L2TPv3 to the bridge br-lan 2069on the remote Linux host 1.2.3.4: 2070@example 2071# Setup tunnel on linux host using raw ip as encapsulation 2072# on 1.2.3.4 2073ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \ 2074 encap udp udp_sport 16384 udp_dport 16384 2075ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \ 2076 0xFFFFFFFF peer_session_id 0xFFFFFFFF 2077ifconfig vmtunnel0 mtu 1500 2078ifconfig vmtunnel0 up 2079brctl addif br-lan vmtunnel0 2080 2081 2082# on 4.3.2.1 2083# launch QEMU instance - if your network has reorder or is very lossy add ,pincounter 2084 2085qemu-system-i386 linux.img -net nic -net l2tpv3,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter 2086 2087 2088@end example 2089 2090@item -netdev vde,id=@var{id}[,sock=@var{socketpath}][,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] 2091@itemx -net vde[,vlan=@var{n}][,name=@var{name}][,sock=@var{socketpath}] [,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] 2092Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and 2093listening for incoming connections on @var{socketpath}. Use GROUP @var{groupname} 2094and MODE @var{octalmode} to change default ownership and permissions for 2095communication port. This option is only available if QEMU has been compiled 2096with vde support enabled. 2097 2098Example: 2099@example 2100# launch vde switch 2101vde_switch -F -sock /tmp/myswitch 2102# launch QEMU instance 2103qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch 2104@end example 2105 2106@item -netdev hubport,id=@var{id},hubid=@var{hubid} 2107 2108Create a hub port on QEMU "vlan" @var{hubid}. 2109 2110The hubport netdev lets you connect a NIC to a QEMU "vlan" instead of a single 2111netdev. @code{-net} and @code{-device} with parameter @option{vlan} create the 2112required hub automatically. 2113 2114@item -netdev vhost-user,chardev=@var{id}[,vhostforce=on|off][,queues=n] 2115 2116Establish a vhost-user netdev, backed by a chardev @var{id}. The chardev should 2117be a unix domain socket backed one. The vhost-user uses a specifically defined 2118protocol to pass vhost ioctl replacement messages to an application on the other 2119end of the socket. On non-MSIX guests, the feature can be forced with 2120@var{vhostforce}. Use 'queues=@var{n}' to specify the number of queues to 2121be created for multiqueue vhost-user. 2122 2123Example: 2124@example 2125qemu -m 512 -object memory-backend-file,id=mem,size=512M,mem-path=/hugetlbfs,share=on \ 2126 -numa node,memdev=mem \ 2127 -chardev socket,path=/path/to/socket \ 2128 -netdev type=vhost-user,id=net0,chardev=chr0 \ 2129 -device virtio-net-pci,netdev=net0 2130@end example 2131 2132@item -net dump[,vlan=@var{n}][,file=@var{file}][,len=@var{len}] 2133Dump network traffic on VLAN @var{n} to file @var{file} (@file{qemu-vlan0.pcap} by default). 2134At most @var{len} bytes (64k by default) per packet are stored. The file format is 2135libpcap, so it can be analyzed with tools such as tcpdump or Wireshark. 2136Note: For devices created with '-netdev', use '-object filter-dump,...' instead. 2137 2138@item -net none 2139Indicate that no network devices should be configured. It is used to 2140override the default configuration (@option{-net nic -net user}) which 2141is activated if no @option{-net} options are provided. 2142ETEXI 2143 2144STEXI 2145@end table 2146ETEXI 2147DEFHEADING() 2148 2149DEFHEADING(Character device options:) 2150STEXI 2151 2152The general form of a character device option is: 2153@table @option 2154ETEXI 2155 2156DEF("chardev", HAS_ARG, QEMU_OPTION_chardev, 2157 "-chardev help\n" 2158 "-chardev null,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2159 "-chardev socket,id=id[,host=host],port=port[,to=to][,ipv4][,ipv6][,nodelay][,reconnect=seconds]\n" 2160 " [,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off]\n" 2161 " [,logfile=PATH][,logappend=on|off][,tls-creds=ID] (tcp)\n" 2162 "-chardev socket,id=id,path=path[,server][,nowait][,telnet][,reconnect=seconds]\n" 2163 " [,mux=on|off][,logfile=PATH][,logappend=on|off] (unix)\n" 2164 "-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n" 2165 " [,localport=localport][,ipv4][,ipv6][,mux=on|off]\n" 2166 " [,logfile=PATH][,logappend=on|off]\n" 2167 "-chardev msmouse,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2168 "-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n" 2169 " [,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2170 "-chardev ringbuf,id=id[,size=size][,logfile=PATH][,logappend=on|off]\n" 2171 "-chardev file,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2172 "-chardev pipe,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2173#ifdef _WIN32 2174 "-chardev console,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2175 "-chardev serial,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2176#else 2177 "-chardev pty,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2178 "-chardev stdio,id=id[,mux=on|off][,signal=on|off][,logfile=PATH][,logappend=on|off]\n" 2179#endif 2180#ifdef CONFIG_BRLAPI 2181 "-chardev braille,id=id[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2182#endif 2183#if defined(__linux__) || defined(__sun__) || defined(__FreeBSD__) \ 2184 || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) 2185 "-chardev serial,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2186 "-chardev tty,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2187#endif 2188#if defined(__linux__) || defined(__FreeBSD__) || defined(__DragonFly__) 2189 "-chardev parallel,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2190 "-chardev parport,id=id,path=path[,mux=on|off][,logfile=PATH][,logappend=on|off]\n" 2191#endif 2192#if defined(CONFIG_SPICE) 2193 "-chardev spicevmc,id=id,name=name[,debug=debug][,logfile=PATH][,logappend=on|off]\n" 2194 "-chardev spiceport,id=id,name=name[,debug=debug][,logfile=PATH][,logappend=on|off]\n" 2195#endif 2196 , QEMU_ARCH_ALL 2197) 2198 2199STEXI 2200@item -chardev @var{backend} ,id=@var{id} [,mux=on|off] [,@var{options}] 2201@findex -chardev 2202Backend is one of: 2203@option{null}, 2204@option{socket}, 2205@option{udp}, 2206@option{msmouse}, 2207@option{vc}, 2208@option{ringbuf}, 2209@option{file}, 2210@option{pipe}, 2211@option{console}, 2212@option{serial}, 2213@option{pty}, 2214@option{stdio}, 2215@option{braille}, 2216@option{tty}, 2217@option{parallel}, 2218@option{parport}, 2219@option{spicevmc}. 2220@option{spiceport}. 2221The specific backend will determine the applicable options. 2222 2223Use "-chardev help" to print all available chardev backend types. 2224 2225All devices must have an id, which can be any string up to 127 characters long. 2226It is used to uniquely identify this device in other command line directives. 2227 2228A character device may be used in multiplexing mode by multiple front-ends. 2229Specify @option{mux=on} to enable this mode. 2230A multiplexer is a "1:N" device, and here the "1" end is your specified chardev 2231backend, and the "N" end is the various parts of QEMU that can talk to a chardev. 2232If you create a chardev with @option{id=myid} and @option{mux=on}, QEMU will 2233create a multiplexer with your specified ID, and you can then configure multiple 2234front ends to use that chardev ID for their input/output. Up to four different 2235front ends can be connected to a single multiplexed chardev. (Without 2236multiplexing enabled, a chardev can only be used by a single front end.) 2237For instance you could use this to allow a single stdio chardev to be used by 2238two serial ports and the QEMU monitor: 2239 2240@example 2241-chardev stdio,mux=on,id=char0 \ 2242-mon chardev=char0,mode=readline \ 2243-serial chardev:char0 \ 2244-serial chardev:char0 2245@end example 2246 2247You can have more than one multiplexer in a system configuration; for instance 2248you could have a TCP port multiplexed between UART 0 and UART 1, and stdio 2249multiplexed between the QEMU monitor and a parallel port: 2250 2251@example 2252-chardev stdio,mux=on,id=char0 \ 2253-mon chardev=char0,mode=readline \ 2254-parallel chardev:char0 \ 2255-chardev tcp,...,mux=on,id=char1 \ 2256-serial chardev:char1 \ 2257-serial chardev:char1 2258@end example 2259 2260When you're using a multiplexed character device, some escape sequences are 2261interpreted in the input. @xref{mux_keys, Keys in the character backend 2262multiplexer}. 2263 2264Note that some other command line options may implicitly create multiplexed 2265character backends; for instance @option{-serial mon:stdio} creates a 2266multiplexed stdio backend connected to the serial port and the QEMU monitor, 2267and @option{-nographic} also multiplexes the console and the monitor to 2268stdio. 2269 2270There is currently no support for multiplexing in the other direction 2271(where a single QEMU front end takes input and output from multiple chardevs). 2272 2273Every backend supports the @option{logfile} option, which supplies the path 2274to a file to record all data transmitted via the backend. The @option{logappend} 2275option controls whether the log file will be truncated or appended to when 2276opened. 2277 2278Further options to each backend are described below. 2279 2280@item -chardev null ,id=@var{id} 2281A void device. This device will not emit any data, and will drop any data it 2282receives. The null backend does not take any options. 2283 2284@item -chardev socket ,id=@var{id} [@var{TCP options} or @var{unix options}] [,server] [,nowait] [,telnet] [,reconnect=@var{seconds}] [,tls-creds=@var{id}] 2285 2286Create a two-way stream socket, which can be either a TCP or a unix socket. A 2287unix socket will be created if @option{path} is specified. Behaviour is 2288undefined if TCP options are specified for a unix socket. 2289 2290@option{server} specifies that the socket shall be a listening socket. 2291 2292@option{nowait} specifies that QEMU should not block waiting for a client to 2293connect to a listening socket. 2294 2295@option{telnet} specifies that traffic on the socket should interpret telnet 2296escape sequences. 2297 2298@option{reconnect} sets the timeout for reconnecting on non-server sockets when 2299the remote end goes away. qemu will delay this many seconds and then attempt 2300to reconnect. Zero disables reconnecting, and is the default. 2301 2302@option{tls-creds} requests enablement of the TLS protocol for encryption, 2303and specifies the id of the TLS credentials to use for the handshake. The 2304credentials must be previously created with the @option{-object tls-creds} 2305argument. 2306 2307TCP and unix socket options are given below: 2308 2309@table @option 2310 2311@item TCP options: port=@var{port} [,host=@var{host}] [,to=@var{to}] [,ipv4] [,ipv6] [,nodelay] 2312 2313@option{host} for a listening socket specifies the local address to be bound. 2314For a connecting socket species the remote host to connect to. @option{host} is 2315optional for listening sockets. If not specified it defaults to @code{0.0.0.0}. 2316 2317@option{port} for a listening socket specifies the local port to be bound. For a 2318connecting socket specifies the port on the remote host to connect to. 2319@option{port} can be given as either a port number or a service name. 2320@option{port} is required. 2321 2322@option{to} is only relevant to listening sockets. If it is specified, and 2323@option{port} cannot be bound, QEMU will attempt to bind to subsequent ports up 2324to and including @option{to} until it succeeds. @option{to} must be specified 2325as a port number. 2326 2327@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. 2328If neither is specified the socket may use either protocol. 2329 2330@option{nodelay} disables the Nagle algorithm. 2331 2332@item unix options: path=@var{path} 2333 2334@option{path} specifies the local path of the unix socket. @option{path} is 2335required. 2336 2337@end table 2338 2339@item -chardev udp ,id=@var{id} [,host=@var{host}] ,port=@var{port} [,localaddr=@var{localaddr}] [,localport=@var{localport}] [,ipv4] [,ipv6] 2340 2341Sends all traffic from the guest to a remote host over UDP. 2342 2343@option{host} specifies the remote host to connect to. If not specified it 2344defaults to @code{localhost}. 2345 2346@option{port} specifies the port on the remote host to connect to. @option{port} 2347is required. 2348 2349@option{localaddr} specifies the local address to bind to. If not specified it 2350defaults to @code{0.0.0.0}. 2351 2352@option{localport} specifies the local port to bind to. If not specified any 2353available local port will be used. 2354 2355@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. 2356If neither is specified the device may use either protocol. 2357 2358@item -chardev msmouse ,id=@var{id} 2359 2360Forward QEMU's emulated msmouse events to the guest. @option{msmouse} does not 2361take any options. 2362 2363@item -chardev vc ,id=@var{id} [[,width=@var{width}] [,height=@var{height}]] [[,cols=@var{cols}] [,rows=@var{rows}]] 2364 2365Connect to a QEMU text console. @option{vc} may optionally be given a specific 2366size. 2367 2368@option{width} and @option{height} specify the width and height respectively of 2369the console, in pixels. 2370 2371@option{cols} and @option{rows} specify that the console be sized to fit a text 2372console with the given dimensions. 2373 2374@item -chardev ringbuf ,id=@var{id} [,size=@var{size}] 2375 2376Create a ring buffer with fixed size @option{size}. 2377@var{size} must be a power of two and defaults to @code{64K}. 2378 2379@item -chardev file ,id=@var{id} ,path=@var{path} 2380 2381Log all traffic received from the guest to a file. 2382 2383@option{path} specifies the path of the file to be opened. This file will be 2384created if it does not already exist, and overwritten if it does. @option{path} 2385is required. 2386 2387@item -chardev pipe ,id=@var{id} ,path=@var{path} 2388 2389Create a two-way connection to the guest. The behaviour differs slightly between 2390Windows hosts and other hosts: 2391 2392On Windows, a single duplex pipe will be created at 2393@file{\\.pipe\@option{path}}. 2394 2395On other hosts, 2 pipes will be created called @file{@option{path}.in} and 2396@file{@option{path}.out}. Data written to @file{@option{path}.in} will be 2397received by the guest. Data written by the guest can be read from 2398@file{@option{path}.out}. QEMU will not create these fifos, and requires them to 2399be present. 2400 2401@option{path} forms part of the pipe path as described above. @option{path} is 2402required. 2403 2404@item -chardev console ,id=@var{id} 2405 2406Send traffic from the guest to QEMU's standard output. @option{console} does not 2407take any options. 2408 2409@option{console} is only available on Windows hosts. 2410 2411@item -chardev serial ,id=@var{id} ,path=@option{path} 2412 2413Send traffic from the guest to a serial device on the host. 2414 2415On Unix hosts serial will actually accept any tty device, 2416not only serial lines. 2417 2418@option{path} specifies the name of the serial device to open. 2419 2420@item -chardev pty ,id=@var{id} 2421 2422Create a new pseudo-terminal on the host and connect to it. @option{pty} does 2423not take any options. 2424 2425@option{pty} is not available on Windows hosts. 2426 2427@item -chardev stdio ,id=@var{id} [,signal=on|off] 2428Connect to standard input and standard output of the QEMU process. 2429 2430@option{signal} controls if signals are enabled on the terminal, that includes 2431exiting QEMU with the key sequence @key{Control-c}. This option is enabled by 2432default, use @option{signal=off} to disable it. 2433 2434@option{stdio} is not available on Windows hosts. 2435 2436@item -chardev braille ,id=@var{id} 2437 2438Connect to a local BrlAPI server. @option{braille} does not take any options. 2439 2440@item -chardev tty ,id=@var{id} ,path=@var{path} 2441 2442@option{tty} is only available on Linux, Sun, FreeBSD, NetBSD, OpenBSD and 2443DragonFlyBSD hosts. It is an alias for @option{serial}. 2444 2445@option{path} specifies the path to the tty. @option{path} is required. 2446 2447@item -chardev parallel ,id=@var{id} ,path=@var{path} 2448@itemx -chardev parport ,id=@var{id} ,path=@var{path} 2449 2450@option{parallel} is only available on Linux, FreeBSD and DragonFlyBSD hosts. 2451 2452Connect to a local parallel port. 2453 2454@option{path} specifies the path to the parallel port device. @option{path} is 2455required. 2456 2457@item -chardev spicevmc ,id=@var{id} ,debug=@var{debug}, name=@var{name} 2458 2459@option{spicevmc} is only available when spice support is built in. 2460 2461@option{debug} debug level for spicevmc 2462 2463@option{name} name of spice channel to connect to 2464 2465Connect to a spice virtual machine channel, such as vdiport. 2466 2467@item -chardev spiceport ,id=@var{id} ,debug=@var{debug}, name=@var{name} 2468 2469@option{spiceport} is only available when spice support is built in. 2470 2471@option{debug} debug level for spicevmc 2472 2473@option{name} name of spice port to connect to 2474 2475Connect to a spice port, allowing a Spice client to handle the traffic 2476identified by a name (preferably a fqdn). 2477ETEXI 2478 2479STEXI 2480@end table 2481ETEXI 2482DEFHEADING() 2483 2484DEFHEADING(Device URL Syntax:) 2485STEXI 2486 2487In addition to using normal file images for the emulated storage devices, 2488QEMU can also use networked resources such as iSCSI devices. These are 2489specified using a special URL syntax. 2490 2491@table @option 2492@item iSCSI 2493iSCSI support allows QEMU to access iSCSI resources directly and use as 2494images for the guest storage. Both disk and cdrom images are supported. 2495 2496Syntax for specifying iSCSI LUNs is 2497``iscsi://<target-ip>[:<port>]/<target-iqn>/<lun>'' 2498 2499By default qemu will use the iSCSI initiator-name 2500'iqn.2008-11.org.linux-kvm[:<name>]' but this can also be set from the command 2501line or a configuration file. 2502 2503Since version Qemu 2.4 it is possible to specify a iSCSI request timeout to detect 2504stalled requests and force a reestablishment of the session. The timeout 2505is specified in seconds. The default is 0 which means no timeout. Libiscsi 25061.15.0 or greater is required for this feature. 2507 2508Example (without authentication): 2509@example 2510qemu-system-i386 -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ 2511 -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ 2512 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 2513@end example 2514 2515Example (CHAP username/password via URL): 2516@example 2517qemu-system-i386 -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1 2518@end example 2519 2520Example (CHAP username/password via environment variables): 2521@example 2522LIBISCSI_CHAP_USERNAME="user" \ 2523LIBISCSI_CHAP_PASSWORD="password" \ 2524qemu-system-i386 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 2525@end example 2526 2527iSCSI support is an optional feature of QEMU and only available when 2528compiled and linked against libiscsi. 2529ETEXI 2530DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi, 2531 "-iscsi [user=user][,password=password]\n" 2532 " [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n" 2533 " [,initiator-name=initiator-iqn][,id=target-iqn]\n" 2534 " [,timeout=timeout]\n" 2535 " iSCSI session parameters\n", QEMU_ARCH_ALL) 2536STEXI 2537 2538iSCSI parameters such as username and password can also be specified via 2539a configuration file. See qemu-doc for more information and examples. 2540 2541@item NBD 2542QEMU supports NBD (Network Block Devices) both using TCP protocol as well 2543as Unix Domain Sockets. 2544 2545Syntax for specifying a NBD device using TCP 2546``nbd:<server-ip>:<port>[:exportname=<export>]'' 2547 2548Syntax for specifying a NBD device using Unix Domain Sockets 2549``nbd:unix:<domain-socket>[:exportname=<export>]'' 2550 2551 2552Example for TCP 2553@example 2554qemu-system-i386 --drive file=nbd:192.0.2.1:30000 2555@end example 2556 2557Example for Unix Domain Sockets 2558@example 2559qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket 2560@end example 2561 2562@item SSH 2563QEMU supports SSH (Secure Shell) access to remote disks. 2564 2565Examples: 2566@example 2567qemu-system-i386 -drive file=ssh://user@@host/path/to/disk.img 2568qemu-system-i386 -drive file.driver=ssh,file.user=user,file.host=host,file.port=22,file.path=/path/to/disk.img 2569@end example 2570 2571Currently authentication must be done using ssh-agent. Other 2572authentication methods may be supported in future. 2573 2574@item Sheepdog 2575Sheepdog is a distributed storage system for QEMU. 2576QEMU supports using either local sheepdog devices or remote networked 2577devices. 2578 2579Syntax for specifying a sheepdog device 2580@example 2581sheepdog[+tcp|+unix]://[host:port]/vdiname[?socket=path][#snapid|#tag] 2582@end example 2583 2584Example 2585@example 2586qemu-system-i386 --drive file=sheepdog://192.0.2.1:30000/MyVirtualMachine 2587@end example 2588 2589See also @url{http://http://www.osrg.net/sheepdog/}. 2590 2591@item GlusterFS 2592GlusterFS is an user space distributed file system. 2593QEMU supports the use of GlusterFS volumes for hosting VM disk images using 2594TCP, Unix Domain Sockets and RDMA transport protocols. 2595 2596Syntax for specifying a VM disk image on GlusterFS volume is 2597@example 2598 2599URI: 2600gluster[+type]://[host[:port]]/volume/path[?socket=...][,debug=N][,logfile=...] 2601 2602JSON: 2603'json:@{"driver":"qcow2","file":@{"driver":"gluster","volume":"testvol","path":"a.img","debug":N,"logfile":"...", 2604@ "server":[@{"type":"tcp","host":"...","port":"..."@}, 2605@ @{"type":"unix","socket":"..."@}]@}@}' 2606@end example 2607 2608 2609Example 2610@example 2611URI: 2612qemu-system-x86_64 --drive file=gluster://192.0.2.1/testvol/a.img, 2613@ file.debug=9,file.logfile=/var/log/qemu-gluster.log 2614 2615JSON: 2616qemu-system-x86_64 'json:@{"driver":"qcow2", 2617@ "file":@{"driver":"gluster", 2618@ "volume":"testvol","path":"a.img", 2619@ "debug":9,"logfile":"/var/log/qemu-gluster.log", 2620@ "server":[@{"type":"tcp","host":"1.2.3.4","port":24007@}, 2621@ @{"type":"unix","socket":"/var/run/glusterd.socket"@}]@}@}' 2622qemu-system-x86_64 -drive driver=qcow2,file.driver=gluster,file.volume=testvol,file.path=/path/a.img, 2623@ file.debug=9,file.logfile=/var/log/qemu-gluster.log, 2624@ file.server.0.type=tcp,file.server.0.host=1.2.3.4,file.server.0.port=24007, 2625@ file.server.1.type=unix,file.server.1.socket=/var/run/glusterd.socket 2626@end example 2627 2628See also @url{http://www.gluster.org}. 2629 2630@item HTTP/HTTPS/FTP/FTPS 2631QEMU supports read-only access to files accessed over http(s) and ftp(s). 2632 2633Syntax using a single filename: 2634@example 2635<protocol>://[<username>[:<password>]@@]<host>/<path> 2636@end example 2637 2638where: 2639@table @option 2640@item protocol 2641'http', 'https', 'ftp', or 'ftps'. 2642 2643@item username 2644Optional username for authentication to the remote server. 2645 2646@item password 2647Optional password for authentication to the remote server. 2648 2649@item host 2650Address of the remote server. 2651 2652@item path 2653Path on the remote server, including any query string. 2654@end table 2655 2656The following options are also supported: 2657@table @option 2658@item url 2659The full URL when passing options to the driver explicitly. 2660 2661@item readahead 2662The amount of data to read ahead with each range request to the remote server. 2663This value may optionally have the suffix 'T', 'G', 'M', 'K', 'k' or 'b'. If it 2664does not have a suffix, it will be assumed to be in bytes. The value must be a 2665multiple of 512 bytes. It defaults to 256k. 2666 2667@item sslverify 2668Whether to verify the remote server's certificate when connecting over SSL. It 2669can have the value 'on' or 'off'. It defaults to 'on'. 2670 2671@item cookie 2672Send this cookie (it can also be a list of cookies separated by ';') with 2673each outgoing request. Only supported when using protocols such as HTTP 2674which support cookies, otherwise ignored. 2675 2676@item timeout 2677Set the timeout in seconds of the CURL connection. This timeout is the time 2678that CURL waits for a response from the remote server to get the size of the 2679image to be downloaded. If not set, the default timeout of 5 seconds is used. 2680@end table 2681 2682Note that when passing options to qemu explicitly, @option{driver} is the value 2683of <protocol>. 2684 2685Example: boot from a remote Fedora 20 live ISO image 2686@example 2687qemu-system-x86_64 --drive media=cdrom,file=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly 2688 2689qemu-system-x86_64 --drive media=cdrom,file.driver=http,file.url=http://dl.fedoraproject.org/pub/fedora/linux/releases/20/Live/x86_64/Fedora-Live-Desktop-x86_64-20-1.iso,readonly 2690@end example 2691 2692Example: boot from a remote Fedora 20 cloud image using a local overlay for 2693writes, copy-on-read, and a readahead of 64k 2694@example 2695qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"http",, "file.url":"https://dl.fedoraproject.org/pub/fedora/linux/releases/20/Images/x86_64/Fedora-x86_64-20-20131211.1-sda.qcow2",, "file.readahead":"64k"@}' /tmp/Fedora-x86_64-20-20131211.1-sda.qcow2 2696 2697qemu-system-x86_64 -drive file=/tmp/Fedora-x86_64-20-20131211.1-sda.qcow2,copy-on-read=on 2698@end example 2699 2700Example: boot from an image stored on a VMware vSphere server with a self-signed 2701certificate using a local overlay for writes, a readahead of 64k and a timeout 2702of 10 seconds. 2703@example 2704qemu-img create -f qcow2 -o backing_file='json:@{"file.driver":"https",, "file.url":"https://user:password@@vsphere.example.com/folder/test/test-flat.vmdk?dcPath=Datacenter&dsName=datastore1",, "file.sslverify":"off",, "file.readahead":"64k",, "file.timeout":10@}' /tmp/test.qcow2 2705 2706qemu-system-x86_64 -drive file=/tmp/test.qcow2 2707@end example 2708ETEXI 2709 2710STEXI 2711@end table 2712ETEXI 2713 2714DEFHEADING(Bluetooth(R) options:) 2715STEXI 2716@table @option 2717ETEXI 2718 2719DEF("bt", HAS_ARG, QEMU_OPTION_bt, \ 2720 "-bt hci,null dumb bluetooth HCI - doesn't respond to commands\n" \ 2721 "-bt hci,host[:id]\n" \ 2722 " use host's HCI with the given name\n" \ 2723 "-bt hci[,vlan=n]\n" \ 2724 " emulate a standard HCI in virtual scatternet 'n'\n" \ 2725 "-bt vhci[,vlan=n]\n" \ 2726 " add host computer to virtual scatternet 'n' using VHCI\n" \ 2727 "-bt device:dev[,vlan=n]\n" \ 2728 " emulate a bluetooth device 'dev' in scatternet 'n'\n", 2729 QEMU_ARCH_ALL) 2730STEXI 2731@item -bt hci[...] 2732@findex -bt 2733Defines the function of the corresponding Bluetooth HCI. -bt options 2734are matched with the HCIs present in the chosen machine type. For 2735example when emulating a machine with only one HCI built into it, only 2736the first @code{-bt hci[...]} option is valid and defines the HCI's 2737logic. The Transport Layer is decided by the machine type. Currently 2738the machines @code{n800} and @code{n810} have one HCI and all other 2739machines have none. 2740 2741@anchor{bt-hcis} 2742The following three types are recognized: 2743 2744@table @option 2745@item -bt hci,null 2746(default) The corresponding Bluetooth HCI assumes no internal logic 2747and will not respond to any HCI commands or emit events. 2748 2749@item -bt hci,host[:@var{id}] 2750(@code{bluez} only) The corresponding HCI passes commands / events 2751to / from the physical HCI identified by the name @var{id} (default: 2752@code{hci0}) on the computer running QEMU. Only available on @code{bluez} 2753capable systems like Linux. 2754 2755@item -bt hci[,vlan=@var{n}] 2756Add a virtual, standard HCI that will participate in the Bluetooth 2757scatternet @var{n} (default @code{0}). Similarly to @option{-net} 2758VLANs, devices inside a bluetooth network @var{n} can only communicate 2759with other devices in the same network (scatternet). 2760@end table 2761 2762@item -bt vhci[,vlan=@var{n}] 2763(Linux-host only) Create a HCI in scatternet @var{n} (default 0) attached 2764to the host bluetooth stack instead of to the emulated target. This 2765allows the host and target machines to participate in a common scatternet 2766and communicate. Requires the Linux @code{vhci} driver installed. Can 2767be used as following: 2768 2769@example 2770qemu-system-i386 [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5 2771@end example 2772 2773@item -bt device:@var{dev}[,vlan=@var{n}] 2774Emulate a bluetooth device @var{dev} and place it in network @var{n} 2775(default @code{0}). QEMU can only emulate one type of bluetooth devices 2776currently: 2777 2778@table @option 2779@item keyboard 2780Virtual wireless keyboard implementing the HIDP bluetooth profile. 2781@end table 2782ETEXI 2783 2784STEXI 2785@end table 2786ETEXI 2787DEFHEADING() 2788 2789#ifdef CONFIG_TPM 2790DEFHEADING(TPM device options:) 2791 2792DEF("tpmdev", HAS_ARG, QEMU_OPTION_tpmdev, \ 2793 "-tpmdev passthrough,id=id[,path=path][,cancel-path=path]\n" 2794 " use path to provide path to a character device; default is /dev/tpm0\n" 2795 " use cancel-path to provide path to TPM's cancel sysfs entry; if\n" 2796 " not provided it will be searched for in /sys/class/misc/tpm?/device\n", 2797 QEMU_ARCH_ALL) 2798STEXI 2799 2800The general form of a TPM device option is: 2801@table @option 2802 2803@item -tpmdev @var{backend} ,id=@var{id} [,@var{options}] 2804@findex -tpmdev 2805Backend type must be: 2806@option{passthrough}. 2807 2808The specific backend type will determine the applicable options. 2809The @code{-tpmdev} option creates the TPM backend and requires a 2810@code{-device} option that specifies the TPM frontend interface model. 2811 2812Options to each backend are described below. 2813 2814Use 'help' to print all available TPM backend types. 2815@example 2816qemu -tpmdev help 2817@end example 2818 2819@item -tpmdev passthrough, id=@var{id}, path=@var{path}, cancel-path=@var{cancel-path} 2820 2821(Linux-host only) Enable access to the host's TPM using the passthrough 2822driver. 2823 2824@option{path} specifies the path to the host's TPM device, i.e., on 2825a Linux host this would be @code{/dev/tpm0}. 2826@option{path} is optional and by default @code{/dev/tpm0} is used. 2827 2828@option{cancel-path} specifies the path to the host TPM device's sysfs 2829entry allowing for cancellation of an ongoing TPM command. 2830@option{cancel-path} is optional and by default QEMU will search for the 2831sysfs entry to use. 2832 2833Some notes about using the host's TPM with the passthrough driver: 2834 2835The TPM device accessed by the passthrough driver must not be 2836used by any other application on the host. 2837 2838Since the host's firmware (BIOS/UEFI) has already initialized the TPM, 2839the VM's firmware (BIOS/UEFI) will not be able to initialize the 2840TPM again and may therefore not show a TPM-specific menu that would 2841otherwise allow the user to configure the TPM, e.g., allow the user to 2842enable/disable or activate/deactivate the TPM. 2843Further, if TPM ownership is released from within a VM then the host's TPM 2844will get disabled and deactivated. To enable and activate the 2845TPM again afterwards, the host has to be rebooted and the user is 2846required to enter the firmware's menu to enable and activate the TPM. 2847If the TPM is left disabled and/or deactivated most TPM commands will fail. 2848 2849To create a passthrough TPM use the following two options: 2850@example 2851-tpmdev passthrough,id=tpm0 -device tpm-tis,tpmdev=tpm0 2852@end example 2853Note that the @code{-tpmdev} id is @code{tpm0} and is referenced by 2854@code{tpmdev=tpm0} in the device option. 2855 2856@end table 2857 2858ETEXI 2859 2860DEFHEADING() 2861 2862#endif 2863 2864DEFHEADING(Linux/Multiboot boot specific:) 2865STEXI 2866 2867When using these options, you can use a given Linux or Multiboot 2868kernel without installing it in the disk image. It can be useful 2869for easier testing of various kernels. 2870 2871@table @option 2872ETEXI 2873 2874DEF("kernel", HAS_ARG, QEMU_OPTION_kernel, \ 2875 "-kernel bzImage use 'bzImage' as kernel image\n", QEMU_ARCH_ALL) 2876STEXI 2877@item -kernel @var{bzImage} 2878@findex -kernel 2879Use @var{bzImage} as kernel image. The kernel can be either a Linux kernel 2880or in multiboot format. 2881ETEXI 2882 2883DEF("append", HAS_ARG, QEMU_OPTION_append, \ 2884 "-append cmdline use 'cmdline' as kernel command line\n", QEMU_ARCH_ALL) 2885STEXI 2886@item -append @var{cmdline} 2887@findex -append 2888Use @var{cmdline} as kernel command line 2889ETEXI 2890 2891DEF("initrd", HAS_ARG, QEMU_OPTION_initrd, \ 2892 "-initrd file use 'file' as initial ram disk\n", QEMU_ARCH_ALL) 2893STEXI 2894@item -initrd @var{file} 2895@findex -initrd 2896Use @var{file} as initial ram disk. 2897 2898@item -initrd "@var{file1} arg=foo,@var{file2}" 2899 2900This syntax is only available with multiboot. 2901 2902Use @var{file1} and @var{file2} as modules and pass arg=foo as parameter to the 2903first module. 2904ETEXI 2905 2906DEF("dtb", HAS_ARG, QEMU_OPTION_dtb, \ 2907 "-dtb file use 'file' as device tree image\n", QEMU_ARCH_ALL) 2908STEXI 2909@item -dtb @var{file} 2910@findex -dtb 2911Use @var{file} as a device tree binary (dtb) image and pass it to the kernel 2912on boot. 2913ETEXI 2914 2915STEXI 2916@end table 2917ETEXI 2918DEFHEADING() 2919 2920DEFHEADING(Debug/Expert options:) 2921STEXI 2922@table @option 2923ETEXI 2924 2925DEF("fw_cfg", HAS_ARG, QEMU_OPTION_fwcfg, 2926 "-fw_cfg [name=]<name>,file=<file>\n" 2927 " add named fw_cfg entry with contents from file\n" 2928 "-fw_cfg [name=]<name>,string=<str>\n" 2929 " add named fw_cfg entry with contents from string\n", 2930 QEMU_ARCH_ALL) 2931STEXI 2932 2933@item -fw_cfg [name=]@var{name},file=@var{file} 2934@findex -fw_cfg 2935Add named fw_cfg entry with contents from file @var{file}. 2936 2937@item -fw_cfg [name=]@var{name},string=@var{str} 2938Add named fw_cfg entry with contents from string @var{str}. 2939 2940The terminating NUL character of the contents of @var{str} will not be 2941included as part of the fw_cfg item data. To insert contents with 2942embedded NUL characters, you have to use the @var{file} parameter. 2943 2944The fw_cfg entries are passed by QEMU through to the guest. 2945 2946Example: 2947@example 2948 -fw_cfg name=opt/com.mycompany/blob,file=./my_blob.bin 2949@end example 2950creates an fw_cfg entry named opt/com.mycompany/blob with contents 2951from ./my_blob.bin. 2952 2953ETEXI 2954 2955DEF("serial", HAS_ARG, QEMU_OPTION_serial, \ 2956 "-serial dev redirect the serial port to char device 'dev'\n", 2957 QEMU_ARCH_ALL) 2958STEXI 2959@item -serial @var{dev} 2960@findex -serial 2961Redirect the virtual serial port to host character device 2962@var{dev}. The default device is @code{vc} in graphical mode and 2963@code{stdio} in non graphical mode. 2964 2965This option can be used several times to simulate up to 4 serial 2966ports. 2967 2968Use @code{-serial none} to disable all serial ports. 2969 2970Available character devices are: 2971@table @option 2972@item vc[:@var{W}x@var{H}] 2973Virtual console. Optionally, a width and height can be given in pixel with 2974@example 2975vc:800x600 2976@end example 2977It is also possible to specify width or height in characters: 2978@example 2979vc:80Cx24C 2980@end example 2981@item pty 2982[Linux only] Pseudo TTY (a new PTY is automatically allocated) 2983@item none 2984No device is allocated. 2985@item null 2986void device 2987@item chardev:@var{id} 2988Use a named character device defined with the @code{-chardev} option. 2989@item /dev/XXX 2990[Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port 2991parameters are set according to the emulated ones. 2992@item /dev/parport@var{N} 2993[Linux only, parallel port only] Use host parallel port 2994@var{N}. Currently SPP and EPP parallel port features can be used. 2995@item file:@var{filename} 2996Write output to @var{filename}. No character can be read. 2997@item stdio 2998[Unix only] standard input/output 2999@item pipe:@var{filename} 3000name pipe @var{filename} 3001@item COM@var{n} 3002[Windows only] Use host serial port @var{n} 3003@item udp:[@var{remote_host}]:@var{remote_port}[@@[@var{src_ip}]:@var{src_port}] 3004This implements UDP Net Console. 3005When @var{remote_host} or @var{src_ip} are not specified 3006they default to @code{0.0.0.0}. 3007When not using a specified @var{src_port} a random port is automatically chosen. 3008 3009If you just want a simple readonly console you can use @code{netcat} or 3010@code{nc}, by starting QEMU with: @code{-serial udp::4555} and nc as: 3011@code{nc -u -l -p 4555}. Any time QEMU writes something to that port it 3012will appear in the netconsole session. 3013 3014If you plan to send characters back via netconsole or you want to stop 3015and start QEMU a lot of times, you should have QEMU use the same 3016source port each time by using something like @code{-serial 3017udp::4555@@:4556} to QEMU. Another approach is to use a patched 3018version of netcat which can listen to a TCP port and send and receive 3019characters via udp. If you have a patched version of netcat which 3020activates telnet remote echo and single char transfer, then you can 3021use the following options to step up a netcat redirector to allow 3022telnet on port 5555 to access the QEMU port. 3023@table @code 3024@item QEMU Options: 3025-serial udp::4555@@:4556 3026@item netcat options: 3027-u -P 4555 -L 0.0.0.0:4556 -t -p 5555 -I -T 3028@item telnet options: 3029localhost 5555 3030@end table 3031 3032@item tcp:[@var{host}]:@var{port}[,@var{server}][,nowait][,nodelay][,reconnect=@var{seconds}] 3033The TCP Net Console has two modes of operation. It can send the serial 3034I/O to a location or wait for a connection from a location. By default 3035the TCP Net Console is sent to @var{host} at the @var{port}. If you use 3036the @var{server} option QEMU will wait for a client socket application 3037to connect to the port before continuing, unless the @code{nowait} 3038option was specified. The @code{nodelay} option disables the Nagle buffering 3039algorithm. The @code{reconnect} option only applies if @var{noserver} is 3040set, if the connection goes down it will attempt to reconnect at the 3041given interval. If @var{host} is omitted, 0.0.0.0 is assumed. Only 3042one TCP connection at a time is accepted. You can use @code{telnet} to 3043connect to the corresponding character device. 3044@table @code 3045@item Example to send tcp console to 192.168.0.2 port 4444 3046-serial tcp:192.168.0.2:4444 3047@item Example to listen and wait on port 4444 for connection 3048-serial tcp::4444,server 3049@item Example to not wait and listen on ip 192.168.0.100 port 4444 3050-serial tcp:192.168.0.100:4444,server,nowait 3051@end table 3052 3053@item telnet:@var{host}:@var{port}[,server][,nowait][,nodelay] 3054The telnet protocol is used instead of raw tcp sockets. The options 3055work the same as if you had specified @code{-serial tcp}. The 3056difference is that the port acts like a telnet server or client using 3057telnet option negotiation. This will also allow you to send the 3058MAGIC_SYSRQ sequence if you use a telnet that supports sending the break 3059sequence. Typically in unix telnet you do it with Control-] and then 3060type "send break" followed by pressing the enter key. 3061 3062@item unix:@var{path}[,server][,nowait][,reconnect=@var{seconds}] 3063A unix domain socket is used instead of a tcp socket. The option works the 3064same as if you had specified @code{-serial tcp} except the unix domain socket 3065@var{path} is used for connections. 3066 3067@item mon:@var{dev_string} 3068This is a special option to allow the monitor to be multiplexed onto 3069another serial port. The monitor is accessed with key sequence of 3070@key{Control-a} and then pressing @key{c}. 3071@var{dev_string} should be any one of the serial devices specified 3072above. An example to multiplex the monitor onto a telnet server 3073listening on port 4444 would be: 3074@table @code 3075@item -serial mon:telnet::4444,server,nowait 3076@end table 3077When the monitor is multiplexed to stdio in this way, Ctrl+C will not terminate 3078QEMU any more but will be passed to the guest instead. 3079 3080@item braille 3081Braille device. This will use BrlAPI to display the braille output on a real 3082or fake device. 3083 3084@item msmouse 3085Three button serial mouse. Configure the guest to use Microsoft protocol. 3086@end table 3087ETEXI 3088 3089DEF("parallel", HAS_ARG, QEMU_OPTION_parallel, \ 3090 "-parallel dev redirect the parallel port to char device 'dev'\n", 3091 QEMU_ARCH_ALL) 3092STEXI 3093@item -parallel @var{dev} 3094@findex -parallel 3095Redirect the virtual parallel port to host device @var{dev} (same 3096devices as the serial port). On Linux hosts, @file{/dev/parportN} can 3097be used to use hardware devices connected on the corresponding host 3098parallel port. 3099 3100This option can be used several times to simulate up to 3 parallel 3101ports. 3102 3103Use @code{-parallel none} to disable all parallel ports. 3104ETEXI 3105 3106DEF("monitor", HAS_ARG, QEMU_OPTION_monitor, \ 3107 "-monitor dev redirect the monitor to char device 'dev'\n", 3108 QEMU_ARCH_ALL) 3109STEXI 3110@item -monitor @var{dev} 3111@findex -monitor 3112Redirect the monitor to host device @var{dev} (same devices as the 3113serial port). 3114The default device is @code{vc} in graphical mode and @code{stdio} in 3115non graphical mode. 3116Use @code{-monitor none} to disable the default monitor. 3117ETEXI 3118DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \ 3119 "-qmp dev like -monitor but opens in 'control' mode\n", 3120 QEMU_ARCH_ALL) 3121STEXI 3122@item -qmp @var{dev} 3123@findex -qmp 3124Like -monitor but opens in 'control' mode. 3125ETEXI 3126DEF("qmp-pretty", HAS_ARG, QEMU_OPTION_qmp_pretty, \ 3127 "-qmp-pretty dev like -qmp but uses pretty JSON formatting\n", 3128 QEMU_ARCH_ALL) 3129STEXI 3130@item -qmp-pretty @var{dev} 3131@findex -qmp-pretty 3132Like -qmp but uses pretty JSON formatting. 3133ETEXI 3134 3135DEF("mon", HAS_ARG, QEMU_OPTION_mon, \ 3136 "-mon [chardev=]name[,mode=readline|control]\n", QEMU_ARCH_ALL) 3137STEXI 3138@item -mon [chardev=]name[,mode=readline|control] 3139@findex -mon 3140Setup monitor on chardev @var{name}. 3141ETEXI 3142 3143DEF("debugcon", HAS_ARG, QEMU_OPTION_debugcon, \ 3144 "-debugcon dev redirect the debug console to char device 'dev'\n", 3145 QEMU_ARCH_ALL) 3146STEXI 3147@item -debugcon @var{dev} 3148@findex -debugcon 3149Redirect the debug console to host device @var{dev} (same devices as the 3150serial port). The debug console is an I/O port which is typically port 31510xe9; writing to that I/O port sends output to this device. 3152The default device is @code{vc} in graphical mode and @code{stdio} in 3153non graphical mode. 3154ETEXI 3155 3156DEF("pidfile", HAS_ARG, QEMU_OPTION_pidfile, \ 3157 "-pidfile file write PID to 'file'\n", QEMU_ARCH_ALL) 3158STEXI 3159@item -pidfile @var{file} 3160@findex -pidfile 3161Store the QEMU process PID in @var{file}. It is useful if you launch QEMU 3162from a script. 3163ETEXI 3164 3165DEF("singlestep", 0, QEMU_OPTION_singlestep, \ 3166 "-singlestep always run in singlestep mode\n", QEMU_ARCH_ALL) 3167STEXI 3168@item -singlestep 3169@findex -singlestep 3170Run the emulation in single step mode. 3171ETEXI 3172 3173DEF("S", 0, QEMU_OPTION_S, \ 3174 "-S freeze CPU at startup (use 'c' to start execution)\n", 3175 QEMU_ARCH_ALL) 3176STEXI 3177@item -S 3178@findex -S 3179Do not start CPU at startup (you must type 'c' in the monitor). 3180ETEXI 3181 3182DEF("realtime", HAS_ARG, QEMU_OPTION_realtime, 3183 "-realtime [mlock=on|off]\n" 3184 " run qemu with realtime features\n" 3185 " mlock=on|off controls mlock support (default: on)\n", 3186 QEMU_ARCH_ALL) 3187STEXI 3188@item -realtime mlock=on|off 3189@findex -realtime 3190Run qemu with realtime features. 3191mlocking qemu and guest memory can be enabled via @option{mlock=on} 3192(enabled by default). 3193ETEXI 3194 3195DEF("gdb", HAS_ARG, QEMU_OPTION_gdb, \ 3196 "-gdb dev wait for gdb connection on 'dev'\n", QEMU_ARCH_ALL) 3197STEXI 3198@item -gdb @var{dev} 3199@findex -gdb 3200Wait for gdb connection on device @var{dev} (@pxref{gdb_usage}). Typical 3201connections will likely be TCP-based, but also UDP, pseudo TTY, or even 3202stdio are reasonable use case. The latter is allowing to start QEMU from 3203within gdb and establish the connection via a pipe: 3204@example 3205(gdb) target remote | exec qemu-system-i386 -gdb stdio ... 3206@end example 3207ETEXI 3208 3209DEF("s", 0, QEMU_OPTION_s, \ 3210 "-s shorthand for -gdb tcp::" DEFAULT_GDBSTUB_PORT "\n", 3211 QEMU_ARCH_ALL) 3212STEXI 3213@item -s 3214@findex -s 3215Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234 3216(@pxref{gdb_usage}). 3217ETEXI 3218 3219DEF("d", HAS_ARG, QEMU_OPTION_d, \ 3220 "-d item1,... enable logging of specified items (use '-d help' for a list of log items)\n", 3221 QEMU_ARCH_ALL) 3222STEXI 3223@item -d @var{item1}[,...] 3224@findex -d 3225Enable logging of specified items. Use '-d help' for a list of log items. 3226ETEXI 3227 3228DEF("D", HAS_ARG, QEMU_OPTION_D, \ 3229 "-D logfile output log to logfile (default stderr)\n", 3230 QEMU_ARCH_ALL) 3231STEXI 3232@item -D @var{logfile} 3233@findex -D 3234Output log in @var{logfile} instead of to stderr 3235ETEXI 3236 3237DEF("dfilter", HAS_ARG, QEMU_OPTION_DFILTER, \ 3238 "-dfilter range,.. filter debug output to range of addresses (useful for -d cpu,exec,etc..)\n", 3239 QEMU_ARCH_ALL) 3240STEXI 3241@item -dfilter @var{range1}[,...] 3242@findex -dfilter 3243Filter debug output to that relevant to a range of target addresses. The filter 3244spec can be either @var{start}+@var{size}, @var{start}-@var{size} or 3245@var{start}..@var{end} where @var{start} @var{end} and @var{size} are the 3246addresses and sizes required. For example: 3247@example 3248 -dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,0xffffffc000060000-0x1000 3249@end example 3250Will dump output for any code in the 0x1000 sized block starting at 0x8000 and 3251the 0x200 sized block starting at 0xffffffc000080000 and another 0x1000 sized 3252block starting at 0xffffffc00005f000. 3253ETEXI 3254 3255DEF("L", HAS_ARG, QEMU_OPTION_L, \ 3256 "-L path set the directory for the BIOS, VGA BIOS and keymaps\n", 3257 QEMU_ARCH_ALL) 3258STEXI 3259@item -L @var{path} 3260@findex -L 3261Set the directory for the BIOS, VGA BIOS and keymaps. 3262 3263To list all the data directories, use @code{-L help}. 3264ETEXI 3265 3266DEF("bios", HAS_ARG, QEMU_OPTION_bios, \ 3267 "-bios file set the filename for the BIOS\n", QEMU_ARCH_ALL) 3268STEXI 3269@item -bios @var{file} 3270@findex -bios 3271Set the filename for the BIOS. 3272ETEXI 3273 3274DEF("enable-kvm", 0, QEMU_OPTION_enable_kvm, \ 3275 "-enable-kvm enable KVM full virtualization support\n", QEMU_ARCH_ALL) 3276STEXI 3277@item -enable-kvm 3278@findex -enable-kvm 3279Enable KVM full virtualization support. This option is only available 3280if KVM support is enabled when compiling. 3281ETEXI 3282 3283DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid, 3284 "-xen-domid id specify xen guest domain id\n", QEMU_ARCH_ALL) 3285DEF("xen-create", 0, QEMU_OPTION_xen_create, 3286 "-xen-create create domain using xen hypercalls, bypassing xend\n" 3287 " warning: should not be used when xend is in use\n", 3288 QEMU_ARCH_ALL) 3289DEF("xen-attach", 0, QEMU_OPTION_xen_attach, 3290 "-xen-attach attach to existing xen domain\n" 3291 " xend will use this when starting QEMU\n", 3292 QEMU_ARCH_ALL) 3293STEXI 3294@item -xen-domid @var{id} 3295@findex -xen-domid 3296Specify xen guest domain @var{id} (XEN only). 3297@item -xen-create 3298@findex -xen-create 3299Create domain using xen hypercalls, bypassing xend. 3300Warning: should not be used when xend is in use (XEN only). 3301@item -xen-attach 3302@findex -xen-attach 3303Attach to existing xen domain. 3304xend will use this when starting QEMU (XEN only). 3305ETEXI 3306 3307DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \ 3308 "-no-reboot exit instead of rebooting\n", QEMU_ARCH_ALL) 3309STEXI 3310@item -no-reboot 3311@findex -no-reboot 3312Exit instead of rebooting. 3313ETEXI 3314 3315DEF("no-shutdown", 0, QEMU_OPTION_no_shutdown, \ 3316 "-no-shutdown stop before shutdown\n", QEMU_ARCH_ALL) 3317STEXI 3318@item -no-shutdown 3319@findex -no-shutdown 3320Don't exit QEMU on guest shutdown, but instead only stop the emulation. 3321This allows for instance switching to monitor to commit changes to the 3322disk image. 3323ETEXI 3324 3325DEF("loadvm", HAS_ARG, QEMU_OPTION_loadvm, \ 3326 "-loadvm [tag|id]\n" \ 3327 " start right away with a saved state (loadvm in monitor)\n", 3328 QEMU_ARCH_ALL) 3329STEXI 3330@item -loadvm @var{file} 3331@findex -loadvm 3332Start right away with a saved state (@code{loadvm} in monitor) 3333ETEXI 3334 3335#ifndef _WIN32 3336DEF("daemonize", 0, QEMU_OPTION_daemonize, \ 3337 "-daemonize daemonize QEMU after initializing\n", QEMU_ARCH_ALL) 3338#endif 3339STEXI 3340@item -daemonize 3341@findex -daemonize 3342Daemonize the QEMU process after initialization. QEMU will not detach from 3343standard IO until it is ready to receive connections on any of its devices. 3344This option is a useful way for external programs to launch QEMU without having 3345to cope with initialization race conditions. 3346ETEXI 3347 3348DEF("option-rom", HAS_ARG, QEMU_OPTION_option_rom, \ 3349 "-option-rom rom load a file, rom, into the option ROM space\n", 3350 QEMU_ARCH_ALL) 3351STEXI 3352@item -option-rom @var{file} 3353@findex -option-rom 3354Load the contents of @var{file} as an option ROM. 3355This option is useful to load things like EtherBoot. 3356ETEXI 3357 3358HXCOMM Silently ignored for compatibility 3359DEF("clock", HAS_ARG, QEMU_OPTION_clock, "", QEMU_ARCH_ALL) 3360 3361HXCOMM Options deprecated by -rtc 3362DEF("localtime", 0, QEMU_OPTION_localtime, "", QEMU_ARCH_ALL) 3363DEF("startdate", HAS_ARG, QEMU_OPTION_startdate, "", QEMU_ARCH_ALL) 3364 3365DEF("rtc", HAS_ARG, QEMU_OPTION_rtc, \ 3366 "-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]\n" \ 3367 " set the RTC base and clock, enable drift fix for clock ticks (x86 only)\n", 3368 QEMU_ARCH_ALL) 3369 3370STEXI 3371 3372@item -rtc [base=utc|localtime|@var{date}][,clock=host|vm][,driftfix=none|slew] 3373@findex -rtc 3374Specify @option{base} as @code{utc} or @code{localtime} to let the RTC start at the current 3375UTC or local time, respectively. @code{localtime} is required for correct date in 3376MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the 3377format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC. 3378 3379By default the RTC is driven by the host system time. This allows using of the 3380RTC as accurate reference clock inside the guest, specifically if the host 3381time is smoothly following an accurate external reference clock, e.g. via NTP. 3382If you want to isolate the guest time from the host, you can set @option{clock} 3383to @code{rt} instead. To even prevent it from progressing during suspension, 3384you can set it to @code{vm}. 3385 3386Enable @option{driftfix} (i386 targets only) if you experience time drift problems, 3387specifically with Windows' ACPI HAL. This option will try to figure out how 3388many timer interrupts were not processed by the Windows guest and will 3389re-inject them. 3390ETEXI 3391 3392DEF("icount", HAS_ARG, QEMU_OPTION_icount, \ 3393 "-icount [shift=N|auto][,align=on|off][,sleep=on|off,rr=record|replay,rrfile=<filename>]\n" \ 3394 " enable virtual instruction counter with 2^N clock ticks per\n" \ 3395 " instruction, enable aligning the host and virtual clocks\n" \ 3396 " or disable real time cpu sleeping\n", QEMU_ARCH_ALL) 3397STEXI 3398@item -icount [shift=@var{N}|auto][,rr=record|replay,rrfile=@var{filename}] 3399@findex -icount 3400Enable virtual instruction counter. The virtual cpu will execute one 3401instruction every 2^@var{N} ns of virtual time. If @code{auto} is specified 3402then the virtual cpu speed will be automatically adjusted to keep virtual 3403time within a few seconds of real time. 3404 3405When the virtual cpu is sleeping, the virtual time will advance at default 3406speed unless @option{sleep=on|off} is specified. 3407With @option{sleep=on|off}, the virtual time will jump to the next timer deadline 3408instantly whenever the virtual cpu goes to sleep mode and will not advance 3409if no timer is enabled. This behavior give deterministic execution times from 3410the guest point of view. 3411 3412Note that while this option can give deterministic behavior, it does not 3413provide cycle accurate emulation. Modern CPUs contain superscalar out of 3414order cores with complex cache hierarchies. The number of instructions 3415executed often has little or no correlation with actual performance. 3416 3417@option{align=on} will activate the delay algorithm which will try 3418to synchronise the host clock and the virtual clock. The goal is to 3419have a guest running at the real frequency imposed by the shift option. 3420Whenever the guest clock is behind the host clock and if 3421@option{align=on} is specified then we print a message to the user 3422to inform about the delay. 3423Currently this option does not work when @option{shift} is @code{auto}. 3424Note: The sync algorithm will work for those shift values for which 3425the guest clock runs ahead of the host clock. Typically this happens 3426when the shift value is high (how high depends on the host machine). 3427 3428When @option{rr} option is specified deterministic record/replay is enabled. 3429Replay log is written into @var{filename} file in record mode and 3430read from this file in replay mode. 3431ETEXI 3432 3433DEF("watchdog", HAS_ARG, QEMU_OPTION_watchdog, \ 3434 "-watchdog model\n" \ 3435 " enable virtual hardware watchdog [default=none]\n", 3436 QEMU_ARCH_ALL) 3437STEXI 3438@item -watchdog @var{model} 3439@findex -watchdog 3440Create a virtual hardware watchdog device. Once enabled (by a guest 3441action), the watchdog must be periodically polled by an agent inside 3442the guest or else the guest will be restarted. Choose a model for 3443which your guest has drivers. 3444 3445The @var{model} is the model of hardware watchdog to emulate. Use 3446@code{-watchdog help} to list available hardware models. Only one 3447watchdog can be enabled for a guest. 3448 3449The following models may be available: 3450@table @option 3451@item ib700 3452iBASE 700 is a very simple ISA watchdog with a single timer. 3453@item i6300esb 3454Intel 6300ESB I/O controller hub is a much more featureful PCI-based 3455dual-timer watchdog. 3456@item diag288 3457A virtual watchdog for s390x backed by the diagnose 288 hypercall 3458(currently KVM only). 3459@end table 3460ETEXI 3461 3462DEF("watchdog-action", HAS_ARG, QEMU_OPTION_watchdog_action, \ 3463 "-watchdog-action reset|shutdown|poweroff|pause|debug|none\n" \ 3464 " action when watchdog fires [default=reset]\n", 3465 QEMU_ARCH_ALL) 3466STEXI 3467@item -watchdog-action @var{action} 3468@findex -watchdog-action 3469 3470The @var{action} controls what QEMU will do when the watchdog timer 3471expires. 3472The default is 3473@code{reset} (forcefully reset the guest). 3474Other possible actions are: 3475@code{shutdown} (attempt to gracefully shutdown the guest), 3476@code{poweroff} (forcefully poweroff the guest), 3477@code{pause} (pause the guest), 3478@code{debug} (print a debug message and continue), or 3479@code{none} (do nothing). 3480 3481Note that the @code{shutdown} action requires that the guest responds 3482to ACPI signals, which it may not be able to do in the sort of 3483situations where the watchdog would have expired, and thus 3484@code{-watchdog-action shutdown} is not recommended for production use. 3485 3486Examples: 3487 3488@table @code 3489@item -watchdog i6300esb -watchdog-action pause 3490@itemx -watchdog ib700 3491@end table 3492ETEXI 3493 3494DEF("echr", HAS_ARG, QEMU_OPTION_echr, \ 3495 "-echr chr set terminal escape character instead of ctrl-a\n", 3496 QEMU_ARCH_ALL) 3497STEXI 3498 3499@item -echr @var{numeric_ascii_value} 3500@findex -echr 3501Change the escape character used for switching to the monitor when using 3502monitor and serial sharing. The default is @code{0x01} when using the 3503@code{-nographic} option. @code{0x01} is equal to pressing 3504@code{Control-a}. You can select a different character from the ascii 3505control keys where 1 through 26 map to Control-a through Control-z. For 3506instance you could use the either of the following to change the escape 3507character to Control-t. 3508@table @code 3509@item -echr 0x14 3510@itemx -echr 20 3511@end table 3512ETEXI 3513 3514DEF("virtioconsole", HAS_ARG, QEMU_OPTION_virtiocon, \ 3515 "-virtioconsole c\n" \ 3516 " set virtio console\n", QEMU_ARCH_ALL) 3517STEXI 3518@item -virtioconsole @var{c} 3519@findex -virtioconsole 3520Set virtio console. 3521 3522This option is maintained for backward compatibility. 3523 3524Please use @code{-device virtconsole} for the new way of invocation. 3525ETEXI 3526 3527DEF("show-cursor", 0, QEMU_OPTION_show_cursor, \ 3528 "-show-cursor show cursor\n", QEMU_ARCH_ALL) 3529STEXI 3530@item -show-cursor 3531@findex -show-cursor 3532Show cursor. 3533ETEXI 3534 3535DEF("tb-size", HAS_ARG, QEMU_OPTION_tb_size, \ 3536 "-tb-size n set TB size\n", QEMU_ARCH_ALL) 3537STEXI 3538@item -tb-size @var{n} 3539@findex -tb-size 3540Set TB size. 3541ETEXI 3542 3543DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \ 3544 "-incoming tcp:[host]:port[,to=maxport][,ipv4][,ipv6]\n" \ 3545 "-incoming rdma:host:port[,ipv4][,ipv6]\n" \ 3546 "-incoming unix:socketpath\n" \ 3547 " prepare for incoming migration, listen on\n" \ 3548 " specified protocol and socket address\n" \ 3549 "-incoming fd:fd\n" \ 3550 "-incoming exec:cmdline\n" \ 3551 " accept incoming migration on given file descriptor\n" \ 3552 " or from given external command\n" \ 3553 "-incoming defer\n" \ 3554 " wait for the URI to be specified via migrate_incoming\n", 3555 QEMU_ARCH_ALL) 3556STEXI 3557@item -incoming tcp:[@var{host}]:@var{port}[,to=@var{maxport}][,ipv4][,ipv6] 3558@itemx -incoming rdma:@var{host}:@var{port}[,ipv4][,ipv6] 3559@findex -incoming 3560Prepare for incoming migration, listen on a given tcp port. 3561 3562@item -incoming unix:@var{socketpath} 3563Prepare for incoming migration, listen on a given unix socket. 3564 3565@item -incoming fd:@var{fd} 3566Accept incoming migration from a given filedescriptor. 3567 3568@item -incoming exec:@var{cmdline} 3569Accept incoming migration as an output from specified external command. 3570 3571@item -incoming defer 3572Wait for the URI to be specified via migrate_incoming. The monitor can 3573be used to change settings (such as migration parameters) prior to issuing 3574the migrate_incoming to allow the migration to begin. 3575ETEXI 3576 3577DEF("nodefaults", 0, QEMU_OPTION_nodefaults, \ 3578 "-nodefaults don't create default devices\n", QEMU_ARCH_ALL) 3579STEXI 3580@item -nodefaults 3581@findex -nodefaults 3582Don't create default devices. Normally, QEMU sets the default devices like serial 3583port, parallel port, virtual console, monitor device, VGA adapter, floppy and 3584CD-ROM drive and others. The @code{-nodefaults} option will disable all those 3585default devices. 3586ETEXI 3587 3588#ifndef _WIN32 3589DEF("chroot", HAS_ARG, QEMU_OPTION_chroot, \ 3590 "-chroot dir chroot to dir just before starting the VM\n", 3591 QEMU_ARCH_ALL) 3592#endif 3593STEXI 3594@item -chroot @var{dir} 3595@findex -chroot 3596Immediately before starting guest execution, chroot to the specified 3597directory. Especially useful in combination with -runas. 3598ETEXI 3599 3600#ifndef _WIN32 3601DEF("runas", HAS_ARG, QEMU_OPTION_runas, \ 3602 "-runas user change to user id user just before starting the VM\n", 3603 QEMU_ARCH_ALL) 3604#endif 3605STEXI 3606@item -runas @var{user} 3607@findex -runas 3608Immediately before starting guest execution, drop root privileges, switching 3609to the specified user. 3610ETEXI 3611 3612DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env, 3613 "-prom-env variable=value\n" 3614 " set OpenBIOS nvram variables\n", 3615 QEMU_ARCH_PPC | QEMU_ARCH_SPARC) 3616STEXI 3617@item -prom-env @var{variable}=@var{value} 3618@findex -prom-env 3619Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only). 3620ETEXI 3621DEF("semihosting", 0, QEMU_OPTION_semihosting, 3622 "-semihosting semihosting mode\n", 3623 QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32 | 3624 QEMU_ARCH_MIPS) 3625STEXI 3626@item -semihosting 3627@findex -semihosting 3628Enable semihosting mode (ARM, M68K, Xtensa, MIPS only). 3629ETEXI 3630DEF("semihosting-config", HAS_ARG, QEMU_OPTION_semihosting_config, 3631 "-semihosting-config [enable=on|off][,target=native|gdb|auto][,arg=str[,...]]\n" \ 3632 " semihosting configuration\n", 3633QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32 | 3634QEMU_ARCH_MIPS) 3635STEXI 3636@item -semihosting-config [enable=on|off][,target=native|gdb|auto][,arg=str[,...]] 3637@findex -semihosting-config 3638Enable and configure semihosting (ARM, M68K, Xtensa, MIPS only). 3639@table @option 3640@item target=@code{native|gdb|auto} 3641Defines where the semihosting calls will be addressed, to QEMU (@code{native}) 3642or to GDB (@code{gdb}). The default is @code{auto}, which means @code{gdb} 3643during debug sessions and @code{native} otherwise. 3644@item arg=@var{str1},arg=@var{str2},... 3645Allows the user to pass input arguments, and can be used multiple times to build 3646up a list. The old-style @code{-kernel}/@code{-append} method of passing a 3647command line is still supported for backward compatibility. If both the 3648@code{--semihosting-config arg} and the @code{-kernel}/@code{-append} are 3649specified, the former is passed to semihosting as it always takes precedence. 3650@end table 3651ETEXI 3652DEF("old-param", 0, QEMU_OPTION_old_param, 3653 "-old-param old param mode\n", QEMU_ARCH_ARM) 3654STEXI 3655@item -old-param 3656@findex -old-param (ARM) 3657Old param mode (ARM only). 3658ETEXI 3659 3660DEF("sandbox", HAS_ARG, QEMU_OPTION_sandbox, \ 3661 "-sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').\n", 3662 QEMU_ARCH_ALL) 3663STEXI 3664@item -sandbox @var{arg} 3665@findex -sandbox 3666Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off' will 3667disable it. The default is 'off'. 3668ETEXI 3669 3670DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig, 3671 "-readconfig <file>\n", QEMU_ARCH_ALL) 3672STEXI 3673@item -readconfig @var{file} 3674@findex -readconfig 3675Read device configuration from @var{file}. This approach is useful when you want to spawn 3676QEMU process with many command line options but you don't want to exceed the command line 3677character limit. 3678ETEXI 3679DEF("writeconfig", HAS_ARG, QEMU_OPTION_writeconfig, 3680 "-writeconfig <file>\n" 3681 " read/write config file\n", QEMU_ARCH_ALL) 3682STEXI 3683@item -writeconfig @var{file} 3684@findex -writeconfig 3685Write device configuration to @var{file}. The @var{file} can be either filename to save 3686command line and device configuration into file or dash @code{-}) character to print the 3687output to stdout. This can be later used as input file for @code{-readconfig} option. 3688ETEXI 3689DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig, 3690 "-nodefconfig\n" 3691 " do not load default config files at startup\n", 3692 QEMU_ARCH_ALL) 3693STEXI 3694@item -nodefconfig 3695@findex -nodefconfig 3696Normally QEMU loads configuration files from @var{sysconfdir} and @var{datadir} at startup. 3697The @code{-nodefconfig} option will prevent QEMU from loading any of those config files. 3698ETEXI 3699DEF("no-user-config", 0, QEMU_OPTION_nouserconfig, 3700 "-no-user-config\n" 3701 " do not load user-provided config files at startup\n", 3702 QEMU_ARCH_ALL) 3703STEXI 3704@item -no-user-config 3705@findex -no-user-config 3706The @code{-no-user-config} option makes QEMU not load any of the user-provided 3707config files on @var{sysconfdir}, but won't make it skip the QEMU-provided config 3708files from @var{datadir}. 3709ETEXI 3710DEF("trace", HAS_ARG, QEMU_OPTION_trace, 3711 "-trace [[enable=]<pattern>][,events=<file>][,file=<file>]\n" 3712 " specify tracing options\n", 3713 QEMU_ARCH_ALL) 3714STEXI 3715HXCOMM This line is not accurate, as some sub-options are backend-specific but 3716HXCOMM HX does not support conditional compilation of text. 3717@item -trace [[enable=]@var{pattern}][,events=@var{file}][,file=@var{file}] 3718@findex -trace 3719@include qemu-option-trace.texi 3720ETEXI 3721 3722HXCOMM Internal use 3723DEF("qtest", HAS_ARG, QEMU_OPTION_qtest, "", QEMU_ARCH_ALL) 3724DEF("qtest-log", HAS_ARG, QEMU_OPTION_qtest_log, "", QEMU_ARCH_ALL) 3725 3726#ifdef __linux__ 3727DEF("enable-fips", 0, QEMU_OPTION_enablefips, 3728 "-enable-fips enable FIPS 140-2 compliance\n", 3729 QEMU_ARCH_ALL) 3730#endif 3731STEXI 3732@item -enable-fips 3733@findex -enable-fips 3734Enable FIPS 140-2 compliance mode. 3735ETEXI 3736 3737HXCOMM Deprecated by -machine accel=tcg property 3738DEF("no-kvm", 0, QEMU_OPTION_no_kvm, "", QEMU_ARCH_I386) 3739 3740HXCOMM Deprecated by kvm-pit driver properties 3741DEF("no-kvm-pit-reinjection", 0, QEMU_OPTION_no_kvm_pit_reinjection, 3742 "", QEMU_ARCH_I386) 3743 3744HXCOMM Deprecated (ignored) 3745DEF("no-kvm-pit", 0, QEMU_OPTION_no_kvm_pit, "", QEMU_ARCH_I386) 3746 3747HXCOMM Deprecated by -machine kernel_irqchip=on|off property 3748DEF("no-kvm-irqchip", 0, QEMU_OPTION_no_kvm_irqchip, "", QEMU_ARCH_I386) 3749 3750HXCOMM Deprecated (ignored) 3751DEF("tdf", 0, QEMU_OPTION_tdf,"", QEMU_ARCH_ALL) 3752 3753DEF("msg", HAS_ARG, QEMU_OPTION_msg, 3754 "-msg timestamp[=on|off]\n" 3755 " change the format of messages\n" 3756 " on|off controls leading timestamps (default:on)\n", 3757 QEMU_ARCH_ALL) 3758STEXI 3759@item -msg timestamp[=on|off] 3760@findex -msg 3761prepend a timestamp to each log message.(default:on) 3762ETEXI 3763 3764DEF("dump-vmstate", HAS_ARG, QEMU_OPTION_dump_vmstate, 3765 "-dump-vmstate <file>\n" 3766 " Output vmstate information in JSON format to file.\n" 3767 " Use the scripts/vmstate-static-checker.py file to\n" 3768 " check for possible regressions in migration code\n" 3769 " by comparing two such vmstate dumps.\n", 3770 QEMU_ARCH_ALL) 3771STEXI 3772@item -dump-vmstate @var{file} 3773@findex -dump-vmstate 3774Dump json-encoded vmstate information for current machine type to file 3775in @var{file} 3776ETEXI 3777 3778DEFHEADING(Generic object creation) 3779 3780DEF("object", HAS_ARG, QEMU_OPTION_object, 3781 "-object TYPENAME[,PROP1=VALUE1,...]\n" 3782 " create a new object of type TYPENAME setting properties\n" 3783 " in the order they are specified. Note that the 'id'\n" 3784 " property must be set. These objects are placed in the\n" 3785 " '/objects' path.\n", 3786 QEMU_ARCH_ALL) 3787STEXI 3788@item -object @var{typename}[,@var{prop1}=@var{value1},...] 3789@findex -object 3790Create a new object of type @var{typename} setting properties 3791in the order they are specified. Note that the 'id' 3792property must be set. These objects are placed in the 3793'/objects' path. 3794 3795@table @option 3796 3797@item -object memory-backend-file,id=@var{id},size=@var{size},mem-path=@var{dir},share=@var{on|off} 3798 3799Creates a memory file backend object, which can be used to back 3800the guest RAM with huge pages. The @option{id} parameter is a 3801unique ID that will be used to reference this memory region 3802when configuring the @option{-numa} argument. The @option{size} 3803option provides the size of the memory region, and accepts 3804common suffixes, eg @option{500M}. The @option{mem-path} provides 3805the path to either a shared memory or huge page filesystem mount. 3806The @option{share} boolean option determines whether the memory 3807region is marked as private to QEMU, or shared. The latter allows 3808a co-operating external process to access the QEMU memory region. 3809 3810@item -object rng-random,id=@var{id},filename=@var{/dev/random} 3811 3812Creates a random number generator backend which obtains entropy from 3813a device on the host. The @option{id} parameter is a unique ID that 3814will be used to reference this entropy backend from the @option{virtio-rng} 3815device. The @option{filename} parameter specifies which file to obtain 3816entropy from and if omitted defaults to @option{/dev/random}. 3817 3818@item -object rng-egd,id=@var{id},chardev=@var{chardevid} 3819 3820Creates a random number generator backend which obtains entropy from 3821an external daemon running on the host. The @option{id} parameter is 3822a unique ID that will be used to reference this entropy backend from 3823the @option{virtio-rng} device. The @option{chardev} parameter is 3824the unique ID of a character device backend that provides the connection 3825to the RNG daemon. 3826 3827@item -object tls-creds-anon,id=@var{id},endpoint=@var{endpoint},dir=@var{/path/to/cred/dir},verify-peer=@var{on|off} 3828 3829Creates a TLS anonymous credentials object, which can be used to provide 3830TLS support on network backends. The @option{id} parameter is a unique 3831ID which network backends will use to access the credentials. The 3832@option{endpoint} is either @option{server} or @option{client} depending 3833on whether the QEMU network backend that uses the credentials will be 3834acting as a client or as a server. If @option{verify-peer} is enabled 3835(the default) then once the handshake is completed, the peer credentials 3836will be verified, though this is a no-op for anonymous credentials. 3837 3838The @var{dir} parameter tells QEMU where to find the credential 3839files. For server endpoints, this directory may contain a file 3840@var{dh-params.pem} providing diffie-hellman parameters to use 3841for the TLS server. If the file is missing, QEMU will generate 3842a set of DH parameters at startup. This is a computationally 3843expensive operation that consumes random pool entropy, so it is 3844recommended that a persistent set of parameters be generated 3845upfront and saved. 3846 3847@item -object tls-creds-x509,id=@var{id},endpoint=@var{endpoint},dir=@var{/path/to/cred/dir},verify-peer=@var{on|off},passwordid=@var{id} 3848 3849Creates a TLS anonymous credentials object, which can be used to provide 3850TLS support on network backends. The @option{id} parameter is a unique 3851ID which network backends will use to access the credentials. The 3852@option{endpoint} is either @option{server} or @option{client} depending 3853on whether the QEMU network backend that uses the credentials will be 3854acting as a client or as a server. If @option{verify-peer} is enabled 3855(the default) then once the handshake is completed, the peer credentials 3856will be verified. With x509 certificates, this implies that the clients 3857must be provided with valid client certificates too. 3858 3859The @var{dir} parameter tells QEMU where to find the credential 3860files. For server endpoints, this directory may contain a file 3861@var{dh-params.pem} providing diffie-hellman parameters to use 3862for the TLS server. If the file is missing, QEMU will generate 3863a set of DH parameters at startup. This is a computationally 3864expensive operation that consumes random pool entropy, so it is 3865recommended that a persistent set of parameters be generated 3866upfront and saved. 3867 3868For x509 certificate credentials the directory will contain further files 3869providing the x509 certificates. The certificates must be stored 3870in PEM format, in filenames @var{ca-cert.pem}, @var{ca-crl.pem} (optional), 3871@var{server-cert.pem} (only servers), @var{server-key.pem} (only servers), 3872@var{client-cert.pem} (only clients), and @var{client-key.pem} (only clients). 3873 3874For the @var{server-key.pem} and @var{client-key.pem} files which 3875contain sensitive private keys, it is possible to use an encrypted 3876version by providing the @var{passwordid} parameter. This provides 3877the ID of a previously created @code{secret} object containing the 3878password for decryption. 3879 3880@item -object filter-buffer,id=@var{id},netdev=@var{netdevid},interval=@var{t}[,queue=@var{all|rx|tx}][,status=@var{on|off}] 3881 3882Interval @var{t} can't be 0, this filter batches the packet delivery: all 3883packets arriving in a given interval on netdev @var{netdevid} are delayed 3884until the end of the interval. Interval is in microseconds. 3885@option{status} is optional that indicate whether the netfilter is 3886on (enabled) or off (disabled), the default status for netfilter will be 'on'. 3887 3888queue @var{all|rx|tx} is an option that can be applied to any netfilter. 3889 3890@option{all}: the filter is attached both to the receive and the transmit 3891 queue of the netdev (default). 3892 3893@option{rx}: the filter is attached to the receive queue of the netdev, 3894 where it will receive packets sent to the netdev. 3895 3896@option{tx}: the filter is attached to the transmit queue of the netdev, 3897 where it will receive packets sent by the netdev. 3898 3899@item -object filter-mirror,id=@var{id},netdev=@var{netdevid},outdev=@var{chardevid}[,queue=@var{all|rx|tx}] 3900 3901filter-mirror on netdev @var{netdevid},mirror net packet to chardev 3902@var{chardevid} 3903 3904@item -object filter-redirector,id=@var{id},netdev=@var{netdevid},indev=@var{chardevid}, 3905outdev=@var{chardevid}[,queue=@var{all|rx|tx}] 3906 3907filter-redirector on netdev @var{netdevid},redirect filter's net packet to chardev 3908@var{chardevid},and redirect indev's packet to filter. 3909Create a filter-redirector we need to differ outdev id from indev id, id can not 3910be the same. we can just use indev or outdev, but at least one of indev or outdev 3911need to be specified. 3912 3913@item -object filter-rewriter,id=@var{id},netdev=@var{netdevid},rewriter-mode=@var{mode}[,queue=@var{all|rx|tx}] 3914 3915Filter-rewriter is a part of COLO project.It will rewrite tcp packet to 3916secondary from primary to keep secondary tcp connection,and rewrite 3917tcp packet to primary from secondary make tcp packet can be handled by 3918client. 3919 3920usage: 3921colo secondary: 3922-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 3923-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 3924-object filter-rewriter,id=rew0,netdev=hn0,queue=all 3925 3926@item -object filter-dump,id=@var{id},netdev=@var{dev}[,file=@var{filename}][,maxlen=@var{len}] 3927 3928Dump the network traffic on netdev @var{dev} to the file specified by 3929@var{filename}. At most @var{len} bytes (64k by default) per packet are stored. 3930The file format is libpcap, so it can be analyzed with tools such as tcpdump 3931or Wireshark. 3932 3933@item -object colo-compare,id=@var{id},primary_in=@var{chardevid},secondary_in=@var{chardevid}, 3934outdev=@var{chardevid} 3935 3936Colo-compare gets packet from primary_in@var{chardevid} and secondary_in@var{chardevid}, than compare primary packet with 3937secondary packet. If the packets are same, we will output primary 3938packet to outdev@var{chardevid}, else we will notify colo-frame 3939do checkpoint and send primary packet to outdev@var{chardevid}. 3940 3941we must use it with the help of filter-mirror and filter-redirector. 3942 3943@example 3944 3945primary: 3946-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown 3947-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 3948-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait 3949-chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait 3950-chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait 3951-chardev socket,id=compare0-0,host=3.3.3.3,port=9001 3952-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait 3953-chardev socket,id=compare_out0,host=3.3.3.3,port=9005 3954-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 3955-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out 3956-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 3957-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0 3958 3959secondary: 3960-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown 3961-device e1000,netdev=hn0,mac=52:a4:00:12:78:66 3962-chardev socket,id=red0,host=3.3.3.3,port=9003 3963-chardev socket,id=red1,host=3.3.3.3,port=9004 3964-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 3965-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 3966 3967@end example 3968 3969If you want to know the detail of above command line, you can read 3970the colo-compare git log. 3971 3972@item -object cryptodev-backend-builtin,id=@var{id}[,queues=@var{queues}] 3973 3974Creates a cryptodev backend which executes crypto opreation from 3975the QEMU cipher APIS. The @var{id} parameter is 3976a unique ID that will be used to reference this cryptodev backend from 3977the @option{virtio-crypto} device. The @var{queues} parameter is optional, 3978which specify the queue number of cryptodev backend, the default of 3979@var{queues} is 1. 3980 3981@example 3982 3983 # qemu-system-x86_64 \ 3984 [...] \ 3985 -object cryptodev-backend-builtin,id=cryptodev0 \ 3986 -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ 3987 [...] 3988@end example 3989 3990@item -object secret,id=@var{id},data=@var{string},format=@var{raw|base64}[,keyid=@var{secretid},iv=@var{string}] 3991@item -object secret,id=@var{id},file=@var{filename},format=@var{raw|base64}[,keyid=@var{secretid},iv=@var{string}] 3992 3993Defines a secret to store a password, encryption key, or some other sensitive 3994data. The sensitive data can either be passed directly via the @var{data} 3995parameter, or indirectly via the @var{file} parameter. Using the @var{data} 3996parameter is insecure unless the sensitive data is encrypted. 3997 3998The sensitive data can be provided in raw format (the default), or base64. 3999When encoded as JSON, the raw format only supports valid UTF-8 characters, 4000so base64 is recommended for sending binary data. QEMU will convert from 4001which ever format is provided to the format it needs internally. eg, an 4002RBD password can be provided in raw format, even though it will be base64 4003encoded when passed onto the RBD sever. 4004 4005For added protection, it is possible to encrypt the data associated with 4006a secret using the AES-256-CBC cipher. Use of encryption is indicated 4007by providing the @var{keyid} and @var{iv} parameters. The @var{keyid} 4008parameter provides the ID of a previously defined secret that contains 4009the AES-256 decryption key. This key should be 32-bytes long and be 4010base64 encoded. The @var{iv} parameter provides the random initialization 4011vector used for encryption of this particular secret and should be a 4012base64 encrypted string of the 16-byte IV. 4013 4014The simplest (insecure) usage is to provide the secret inline 4015 4016@example 4017 4018 # $QEMU -object secret,id=sec0,data=letmein,format=raw 4019 4020@end example 4021 4022The simplest secure usage is to provide the secret via a file 4023 4024 # echo -n "letmein" > mypasswd.txt 4025 # $QEMU -object secret,id=sec0,file=mypasswd.txt,format=raw 4026 4027For greater security, AES-256-CBC should be used. To illustrate usage, 4028consider the openssl command line tool which can encrypt the data. Note 4029that when encrypting, the plaintext must be padded to the cipher block 4030size (32 bytes) using the standard PKCS#5/6 compatible padding algorithm. 4031 4032First a master key needs to be created in base64 encoding: 4033 4034@example 4035 # openssl rand -base64 32 > key.b64 4036 # KEY=$(base64 -d key.b64 | hexdump -v -e '/1 "%02X"') 4037@end example 4038 4039Each secret to be encrypted needs to have a random initialization vector 4040generated. These do not need to be kept secret 4041 4042@example 4043 # openssl rand -base64 16 > iv.b64 4044 # IV=$(base64 -d iv.b64 | hexdump -v -e '/1 "%02X"') 4045@end example 4046 4047The secret to be defined can now be encrypted, in this case we're 4048telling openssl to base64 encode the result, but it could be left 4049as raw bytes if desired. 4050 4051@example 4052 # SECRET=$(echo -n "letmein" | 4053 openssl enc -aes-256-cbc -a -K $KEY -iv $IV) 4054@end example 4055 4056When launching QEMU, create a master secret pointing to @code{key.b64} 4057and specify that to be used to decrypt the user password. Pass the 4058contents of @code{iv.b64} to the second secret 4059 4060@example 4061 # $QEMU \ 4062 -object secret,id=secmaster0,format=base64,file=key.b64 \ 4063 -object secret,id=sec0,keyid=secmaster0,format=base64,\ 4064 data=$SECRET,iv=$(<iv.b64) 4065@end example 4066 4067@end table 4068 4069ETEXI 4070 4071 4072HXCOMM This is the last statement. Insert new options before this line! 4073STEXI 4074@end table 4075ETEXI 4076
