1HXCOMM Use DEFHEADING() to define headings in both help text and texi 2HXCOMM Text between STEXI and ETEXI are copied to texi version and 3HXCOMM discarded from C version 4HXCOMM DEF(option, HAS_ARG/0, opt_enum, opt_help, arch_mask) is used to 5HXCOMM construct option structures, enums and help message for specified 6HXCOMM architectures. 7HXCOMM HXCOMM can be used for comments, discarded from both texi and C 8 9DEFHEADING(Standard options:) 10STEXI 11@table @option 12ETEXI 13 14DEF("help", 0, QEMU_OPTION_h, 15 "-h or -help display this help and exit\n", QEMU_ARCH_ALL) 16STEXI 17@item -h 18@findex -h 19Display help and exit 20ETEXI 21 22DEF("version", 0, QEMU_OPTION_version, 23 "-version display version information and exit\n", QEMU_ARCH_ALL) 24STEXI 25@item -version 26@findex -version 27Display version information and exit 28ETEXI 29 30DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ 31 "-machine [type=]name[,prop[=value][,...]]\n" 32 " selects emulated machine ('-machine help' for list)\n" 33 " property accel=accel1[:accel2[:...]] selects accelerator\n" 34 " supported accelerators are kvm, xen, tcg (default: tcg)\n" 35 " kernel_irqchip=on|off controls accelerated irqchip support\n" 36 " kvm_shadow_mem=size of KVM shadow MMU\n" 37 " dump-guest-core=on|off include guest memory in a core dump (default=on)\n" 38 " mem-merge=on|off controls memory merge support (default: on)\n", 39 QEMU_ARCH_ALL) 40STEXI 41@item -machine [type=]@var{name}[,prop=@var{value}[,...]] 42@findex -machine 43Select the emulated machine by @var{name}. Use @code{-machine help} to list 44available machines. Supported machine properties are: 45@table @option 46@item accel=@var{accels1}[:@var{accels2}[:...]] 47This is used to enable an accelerator. Depending on the target architecture, 48kvm, xen, or tcg can be available. By default, tcg is used. If there is more 49than one accelerator specified, the next one is used if the previous one fails 50to initialize. 51@item kernel_irqchip=on|off 52Enables in-kernel irqchip support for the chosen accelerator when available. 53@item kvm_shadow_mem=size 54Defines the size of the KVM shadow MMU. 55@item dump-guest-core=on|off 56Include guest memory in a core dump. The default is on. 57@item mem-merge=on|off 58Enables or disables memory merge support. This feature, when supported by 59the host, de-duplicates identical memory pages among VMs instances 60(enabled by default). 61@end table 62ETEXI 63 64HXCOMM Deprecated by -machine 65DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL) 66 67DEF("cpu", HAS_ARG, QEMU_OPTION_cpu, 68 "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL) 69STEXI 70@item -cpu @var{model} 71@findex -cpu 72Select CPU model (@code{-cpu help} for list and additional feature selection) 73ETEXI 74 75DEF("smp", HAS_ARG, QEMU_OPTION_smp, 76 "-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n" 77 " set the number of CPUs to 'n' [default=1]\n" 78 " maxcpus= maximum number of total cpus, including\n" 79 " offline CPUs for hotplug, etc\n" 80 " cores= number of CPU cores on one socket\n" 81 " threads= number of threads on one CPU core\n" 82 " sockets= number of discrete sockets in the system\n", 83 QEMU_ARCH_ALL) 84STEXI 85@item -smp @var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}] 86@findex -smp 87Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255 88CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs 89to 4. 90For the PC target, the number of @var{cores} per socket, the number 91of @var{threads} per cores and the total number of @var{sockets} can be 92specified. Missing values will be computed. If any on the three values is 93given, the total number of CPUs @var{n} can be omitted. @var{maxcpus} 94specifies the maximum number of hotpluggable CPUs. 95ETEXI 96 97DEF("numa", HAS_ARG, QEMU_OPTION_numa, 98 "-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]\n", QEMU_ARCH_ALL) 99STEXI 100@item -numa @var{opts} 101@findex -numa 102Simulate a multi node NUMA system. If mem and cpus are omitted, resources 103are split equally. 104ETEXI 105 106DEF("fda", HAS_ARG, QEMU_OPTION_fda, 107 "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL) 108DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL) 109STEXI 110@item -fda @var{file} 111@item -fdb @var{file} 112@findex -fda 113@findex -fdb 114Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can 115use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}). 116ETEXI 117 118DEF("hda", HAS_ARG, QEMU_OPTION_hda, 119 "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL) 120DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL) 121DEF("hdc", HAS_ARG, QEMU_OPTION_hdc, 122 "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL) 123DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL) 124STEXI 125@item -hda @var{file} 126@item -hdb @var{file} 127@item -hdc @var{file} 128@item -hdd @var{file} 129@findex -hda 130@findex -hdb 131@findex -hdc 132@findex -hdd 133Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}). 134ETEXI 135 136DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom, 137 "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n", 138 QEMU_ARCH_ALL) 139STEXI 140@item -cdrom @var{file} 141@findex -cdrom 142Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and 143@option{-cdrom} at the same time). You can use the host CD-ROM by 144using @file{/dev/cdrom} as filename (@pxref{host_drives}). 145ETEXI 146 147DEF("drive", HAS_ARG, QEMU_OPTION_drive, 148 "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n" 149 " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n" 150 " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n" 151 " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n" 152 " [,readonly=on|off][,copy-on-read=on|off]\n" 153 " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]\n" 154 " use 'file' as a drive image\n", QEMU_ARCH_ALL) 155STEXI 156@item -drive @var{option}[,@var{option}[,@var{option}[,...]]] 157@findex -drive 158 159Define a new drive. Valid options are: 160 161@table @option 162@item file=@var{file} 163This option defines which disk image (@pxref{disk_images}) to use with 164this drive. If the filename contains comma, you must double it 165(for instance, "file=my,,file" to use file "my,file"). 166 167Special files such as iSCSI devices can be specified using protocol 168specific URLs. See the section for "Device URL Syntax" for more information. 169@item if=@var{interface} 170This option defines on which type on interface the drive is connected. 171Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio. 172@item bus=@var{bus},unit=@var{unit} 173These options define where is connected the drive by defining the bus number and 174the unit id. 175@item index=@var{index} 176This option defines where is connected the drive by using an index in the list 177of available connectors of a given interface type. 178@item media=@var{media} 179This option defines the type of the media: disk or cdrom. 180@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}] 181These options have the same definition as they have in @option{-hdachs}. 182@item snapshot=@var{snapshot} 183@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}). 184@item cache=@var{cache} 185@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data. 186@item aio=@var{aio} 187@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO. 188@item format=@var{format} 189Specify which disk @var{format} will be used rather than detecting 190the format. Can be used to specifiy format=raw to avoid interpreting 191an untrusted format header. 192@item serial=@var{serial} 193This option specifies the serial number to assign to the device. 194@item addr=@var{addr} 195Specify the controller's PCI address (if=virtio only). 196@item werror=@var{action},rerror=@var{action} 197Specify which @var{action} to take on write and read errors. Valid actions are: 198"ignore" (ignore the error and try to continue), "stop" (pause QEMU), 199"report" (report the error to the guest), "enospc" (pause QEMU only if the 200host disk is full; report the error to the guest otherwise). 201The default setting is @option{werror=enospc} and @option{rerror=report}. 202@item readonly 203Open drive @option{file} as read-only. Guest write attempts will fail. 204@item copy-on-read=@var{copy-on-read} 205@var{copy-on-read} is "on" or "off" and enables whether to copy read backing 206file sectors into the image file. 207@end table 208 209By default, the @option{cache=writeback} mode is used. It will report data 210writes as completed as soon as the data is present in the host page cache. 211This is safe as long as your guest OS makes sure to correctly flush disk caches 212where needed. If your guest OS does not handle volatile disk write caches 213correctly and your host crashes or loses power, then the guest may experience 214data corruption. 215 216For such guests, you should consider using @option{cache=writethrough}. This 217means that the host page cache will be used to read and write data, but write 218notification will be sent to the guest only after QEMU has made sure to flush 219each write to the disk. Be aware that this has a major impact on performance. 220 221The host page cache can be avoided entirely with @option{cache=none}. This will 222attempt to do disk IO directly to the guest's memory. QEMU may still perform 223an internal copy of the data. Note that this is considered a writeback mode and 224the guest OS must handle the disk write cache correctly in order to avoid data 225corruption on host crashes. 226 227The host page cache can be avoided while only sending write notifications to 228the guest when the data has been flushed to the disk using 229@option{cache=directsync}. 230 231In case you don't care about data integrity over host failures, use 232@option{cache=unsafe}. This option tells QEMU that it never needs to write any 233data to the disk but can instead keep things in cache. If anything goes wrong, 234like your host losing power, the disk storage getting disconnected accidentally, 235etc. your image will most probably be rendered unusable. When using 236the @option{-snapshot} option, unsafe caching is always used. 237 238Copy-on-read avoids accessing the same backing file sectors repeatedly and is 239useful when the backing file is over a slow network. By default copy-on-read 240is off. 241 242Instead of @option{-cdrom} you can use: 243@example 244qemu-system-i386 -drive file=file,index=2,media=cdrom 245@end example 246 247Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can 248use: 249@example 250qemu-system-i386 -drive file=file,index=0,media=disk 251qemu-system-i386 -drive file=file,index=1,media=disk 252qemu-system-i386 -drive file=file,index=2,media=disk 253qemu-system-i386 -drive file=file,index=3,media=disk 254@end example 255 256You can open an image using pre-opened file descriptors from an fd set: 257@example 258qemu-system-i386 259-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" 260-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" 261-drive file=/dev/fdset/2,index=0,media=disk 262@end example 263 264You can connect a CDROM to the slave of ide0: 265@example 266qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom 267@end example 268 269If you don't specify the "file=" argument, you define an empty drive: 270@example 271qemu-system-i386 -drive if=ide,index=1,media=cdrom 272@end example 273 274You can connect a SCSI disk with unit ID 6 on the bus #0: 275@example 276qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6 277@end example 278 279Instead of @option{-fda}, @option{-fdb}, you can use: 280@example 281qemu-system-i386 -drive file=file,index=0,if=floppy 282qemu-system-i386 -drive file=file,index=1,if=floppy 283@end example 284 285By default, @var{interface} is "ide" and @var{index} is automatically 286incremented: 287@example 288qemu-system-i386 -drive file=a -drive file=b" 289@end example 290is interpreted like: 291@example 292qemu-system-i386 -hda a -hdb b 293@end example 294ETEXI 295 296DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd, 297 "-add-fd fd=fd,set=set[,opaque=opaque]\n" 298 " Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL) 299STEXI 300@item -add-fd fd=@var{fd},set=@var{set}[,opaque=@var{opaque}] 301@findex -add-fd 302 303Add a file descriptor to an fd set. Valid options are: 304 305@table @option 306@item fd=@var{fd} 307This option defines the file descriptor of which a duplicate is added to fd set. 308The file descriptor cannot be stdin, stdout, or stderr. 309@item set=@var{set} 310This option defines the ID of the fd set to add the file descriptor to. 311@item opaque=@var{opaque} 312This option defines a free-form string that can be used to describe @var{fd}. 313@end table 314 315You can open an image using pre-opened file descriptors from an fd set: 316@example 317qemu-system-i386 318-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" 319-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" 320-drive file=/dev/fdset/2,index=0,media=disk 321@end example 322ETEXI 323 324DEF("set", HAS_ARG, QEMU_OPTION_set, 325 "-set group.id.arg=value\n" 326 " set <arg> parameter for item <id> of type <group>\n" 327 " i.e. -set drive.$id.file=/path/to/image\n", QEMU_ARCH_ALL) 328STEXI 329@item -set 330@findex -set 331TODO 332ETEXI 333 334DEF("global", HAS_ARG, QEMU_OPTION_global, 335 "-global driver.prop=value\n" 336 " set a global default for a driver property\n", 337 QEMU_ARCH_ALL) 338STEXI 339@item -global @var{driver}.@var{prop}=@var{value} 340@findex -global 341Set default value of @var{driver}'s property @var{prop} to @var{value}, e.g.: 342 343@example 344qemu-system-i386 -global ide-drive.physical_block_size=4096 -drive file=file,if=ide,index=0,media=disk 345@end example 346 347In particular, you can use this to set driver properties for devices which are 348created automatically by the machine model. To create a device which is not 349created automatically and set properties on it, use -@option{device}. 350ETEXI 351 352DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock, 353 "-mtdblock file use 'file' as on-board Flash memory image\n", 354 QEMU_ARCH_ALL) 355STEXI 356@item -mtdblock @var{file} 357@findex -mtdblock 358Use @var{file} as on-board Flash memory image. 359ETEXI 360 361DEF("sd", HAS_ARG, QEMU_OPTION_sd, 362 "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL) 363STEXI 364@item -sd @var{file} 365@findex -sd 366Use @var{file} as SecureDigital card image. 367ETEXI 368 369DEF("pflash", HAS_ARG, QEMU_OPTION_pflash, 370 "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL) 371STEXI 372@item -pflash @var{file} 373@findex -pflash 374Use @var{file} as a parallel flash image. 375ETEXI 376 377DEF("boot", HAS_ARG, QEMU_OPTION_boot, 378 "-boot [order=drives][,once=drives][,menu=on|off]\n" 379 " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time]\n" 380 " 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n" 381 " 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on\n" 382 " 'sp_time': the period that splash picture last if menu=on, unit is ms\n" 383 " 'rb_timeout': the timeout before guest reboot when boot failed, unit is ms\n", 384 QEMU_ARCH_ALL) 385STEXI 386@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}] 387@findex -boot 388Specify boot order @var{drives} as a string of drive letters. Valid 389drive letters depend on the target achitecture. The x86 PC uses: a, b 390(floppy 1 and 2), c (first hard disk), d (first CD-ROM), n-p (Etherboot 391from network adapter 1-4), hard disk boot is the default. To apply a 392particular boot order only on the first startup, specify it via 393@option{once}. 394 395Interactive boot menus/prompts can be enabled via @option{menu=on} as far 396as firmware/BIOS supports them. The default is non-interactive boot. 397 398A splash picture could be passed to bios, enabling user to show it as logo, 399when option splash=@var{sp_name} is given and menu=on, If firmware/BIOS 400supports them. Currently Seabios for X86 system support it. 401limitation: The splash file could be a jpeg file or a BMP file in 24 BPP 402format(true color). The resolution should be supported by the SVGA mode, so 403the recommended is 320x240, 640x480, 800x640. 404 405A timeout could be passed to bios, guest will pause for @var{rb_timeout} ms 406when boot failed, then reboot. If @var{rb_timeout} is '-1', guest will not 407reboot, qemu passes '-1' to bios by default. Currently Seabios for X86 408system support it. 409 410@example 411# try to boot from network first, then from hard disk 412qemu-system-i386 -boot order=nc 413# boot from CD-ROM first, switch back to default order after reboot 414qemu-system-i386 -boot once=d 415# boot with a splash picture for 5 seconds. 416qemu-system-i386 -boot menu=on,splash=/root/boot.bmp,splash-time=5000 417@end example 418 419Note: The legacy format '-boot @var{drives}' is still supported but its 420use is discouraged as it may be removed from future versions. 421ETEXI 422 423DEF("snapshot", 0, QEMU_OPTION_snapshot, 424 "-snapshot write to temporary files instead of disk image files\n", 425 QEMU_ARCH_ALL) 426STEXI 427@item -snapshot 428@findex -snapshot 429Write to temporary files instead of disk image files. In this case, 430the raw disk image you use is not written back. You can however force 431the write back by pressing @key{C-a s} (@pxref{disk_images}). 432ETEXI 433 434DEF("m", HAS_ARG, QEMU_OPTION_m, 435 "-m megs set virtual RAM size to megs MB [default=" 436 stringify(DEFAULT_RAM_SIZE) "]\n", QEMU_ARCH_ALL) 437STEXI 438@item -m @var{megs} 439@findex -m 440Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB. Optionally, 441a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or 442gigabytes respectively. 443ETEXI 444 445DEF("mem-path", HAS_ARG, QEMU_OPTION_mempath, 446 "-mem-path FILE provide backing storage for guest RAM\n", QEMU_ARCH_ALL) 447STEXI 448@item -mem-path @var{path} 449Allocate guest RAM from a temporarily created file in @var{path}. 450ETEXI 451 452#ifdef MAP_POPULATE 453DEF("mem-prealloc", 0, QEMU_OPTION_mem_prealloc, 454 "-mem-prealloc preallocate guest memory (use with -mem-path)\n", 455 QEMU_ARCH_ALL) 456STEXI 457@item -mem-prealloc 458Preallocate memory when using -mem-path. 459ETEXI 460#endif 461 462DEF("k", HAS_ARG, QEMU_OPTION_k, 463 "-k language use keyboard layout (for example 'fr' for French)\n", 464 QEMU_ARCH_ALL) 465STEXI 466@item -k @var{language} 467@findex -k 468Use keyboard layout @var{language} (for example @code{fr} for 469French). This option is only needed where it is not easy to get raw PC 470keycodes (e.g. on Macs, with some X11 servers or with a VNC 471display). You don't normally need to use it on PC/Linux or PC/Windows 472hosts. 473 474The available layouts are: 475@example 476ar de-ch es fo fr-ca hu ja mk no pt-br sv 477da en-gb et fr fr-ch is lt nl pl ru th 478de en-us fi fr-be hr it lv nl-be pt sl tr 479@end example 480 481The default is @code{en-us}. 482ETEXI 483 484 485DEF("audio-help", 0, QEMU_OPTION_audio_help, 486 "-audio-help print list of audio drivers and their options\n", 487 QEMU_ARCH_ALL) 488STEXI 489@item -audio-help 490@findex -audio-help 491Will show the audio subsystem help: list of drivers, tunable 492parameters. 493ETEXI 494 495DEF("soundhw", HAS_ARG, QEMU_OPTION_soundhw, 496 "-soundhw c1,... enable audio support\n" 497 " and only specified sound cards (comma separated list)\n" 498 " use '-soundhw help' to get the list of supported cards\n" 499 " use '-soundhw all' to enable all of them\n", QEMU_ARCH_ALL) 500STEXI 501@item -soundhw @var{card1}[,@var{card2},...] or -soundhw all 502@findex -soundhw 503Enable audio and selected sound hardware. Use 'help' to print all 504available sound hardware. 505 506@example 507qemu-system-i386 -soundhw sb16,adlib disk.img 508qemu-system-i386 -soundhw es1370 disk.img 509qemu-system-i386 -soundhw ac97 disk.img 510qemu-system-i386 -soundhw hda disk.img 511qemu-system-i386 -soundhw all disk.img 512qemu-system-i386 -soundhw help 513@end example 514 515Note that Linux's i810_audio OSS kernel (for AC97) module might 516require manually specifying clocking. 517 518@example 519modprobe i810_audio clocking=48000 520@end example 521ETEXI 522 523DEF("balloon", HAS_ARG, QEMU_OPTION_balloon, 524 "-balloon none disable balloon device\n" 525 "-balloon virtio[,addr=str]\n" 526 " enable virtio balloon device (default)\n", QEMU_ARCH_ALL) 527STEXI 528@item -balloon none 529@findex -balloon 530Disable balloon device. 531@item -balloon virtio[,addr=@var{addr}] 532Enable virtio balloon device (default), optionally with PCI address 533@var{addr}. 534ETEXI 535 536STEXI 537@end table 538ETEXI 539 540DEF("usb", 0, QEMU_OPTION_usb, 541 "-usb enable the USB driver (will be the default soon)\n", 542 QEMU_ARCH_ALL) 543STEXI 544USB options: 545@table @option 546 547@item -usb 548@findex -usb 549Enable the USB driver (will be the default soon) 550ETEXI 551 552DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice, 553 "-usbdevice name add the host or guest USB device 'name'\n", 554 QEMU_ARCH_ALL) 555STEXI 556 557@item -usbdevice @var{devname} 558@findex -usbdevice 559Add the USB device @var{devname}. @xref{usb_devices}. 560 561@table @option 562 563@item mouse 564Virtual Mouse. This will override the PS/2 mouse emulation when activated. 565 566@item tablet 567Pointer device that uses absolute coordinates (like a touchscreen). This 568means QEMU is able to report the mouse position without having to grab the 569mouse. Also overrides the PS/2 mouse emulation when activated. 570 571@item disk:[format=@var{format}]:@var{file} 572Mass storage device based on file. The optional @var{format} argument 573will be used rather than detecting the format. Can be used to specifiy 574@code{format=raw} to avoid interpreting an untrusted format header. 575 576@item host:@var{bus}.@var{addr} 577Pass through the host device identified by @var{bus}.@var{addr} (Linux only). 578 579@item host:@var{vendor_id}:@var{product_id} 580Pass through the host device identified by @var{vendor_id}:@var{product_id} 581(Linux only). 582 583@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev} 584Serial converter to host character device @var{dev}, see @code{-serial} for the 585available devices. 586 587@item braille 588Braille device. This will use BrlAPI to display the braille output on a real 589or fake device. 590 591@item net:@var{options} 592Network adapter that supports CDC ethernet and RNDIS protocols. 593 594@end table 595ETEXI 596 597DEF("device", HAS_ARG, QEMU_OPTION_device, 598 "-device driver[,prop[=value][,...]]\n" 599 " add device (based on driver)\n" 600 " prop=value,... sets driver properties\n" 601 " use '-device help' to print all possible drivers\n" 602 " use '-device driver,help' to print all possible properties\n", 603 QEMU_ARCH_ALL) 604STEXI 605@item -device @var{driver}[,@var{prop}[=@var{value}][,...]] 606@findex -device 607Add device @var{driver}. @var{prop}=@var{value} sets driver 608properties. Valid properties depend on the driver. To get help on 609possible drivers and properties, use @code{-device help} and 610@code{-device @var{driver},help}. 611ETEXI 612 613DEFHEADING() 614 615DEFHEADING(File system options:) 616 617DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev, 618 "-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n" 619 " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", 620 QEMU_ARCH_ALL) 621 622STEXI 623 624@item -fsdev @var{fsdriver},id=@var{id},path=@var{path},[security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] 625@findex -fsdev 626Define a new file system device. Valid options are: 627@table @option 628@item @var{fsdriver} 629This option specifies the fs driver backend to use. 630Currently "local", "handle" and "proxy" file system drivers are supported. 631@item id=@var{id} 632Specifies identifier for this device 633@item path=@var{path} 634Specifies the export path for the file system device. Files under 635this path will be available to the 9p client on the guest. 636@item security_model=@var{security_model} 637Specifies the security model to be used for this export path. 638Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". 639In "passthrough" security model, files are stored using the same 640credentials as they are created on the guest. This requires QEMU 641to run as root. In "mapped-xattr" security model, some of the file 642attributes like uid, gid, mode bits and link target are stored as 643file attributes. For "mapped-file" these attributes are stored in the 644hidden .virtfs_metadata directory. Directories exported by this security model cannot 645interact with other unix tools. "none" security model is same as 646passthrough except the sever won't report failures if it fails to 647set file attributes like ownership. Security model is mandatory 648only for local fsdriver. Other fsdrivers (like handle, proxy) don't take 649security model as a parameter. 650@item writeout=@var{writeout} 651This is an optional argument. The only supported value is "immediate". 652This means that host page cache will be used to read and write data but 653write notification will be sent to the guest only when the data has been 654reported as written by the storage subsystem. 655@item readonly 656Enables exporting 9p share as a readonly mount for guests. By default 657read-write access is given. 658@item socket=@var{socket} 659Enables proxy filesystem driver to use passed socket file for communicating 660with virtfs-proxy-helper 661@item sock_fd=@var{sock_fd} 662Enables proxy filesystem driver to use passed socket descriptor for 663communicating with virtfs-proxy-helper. Usually a helper like libvirt 664will create socketpair and pass one of the fds as sock_fd 665@end table 666 667-fsdev option is used along with -device driver "virtio-9p-pci". 668@item -device virtio-9p-pci,fsdev=@var{id},mount_tag=@var{mount_tag} 669Options for virtio-9p-pci driver are: 670@table @option 671@item fsdev=@var{id} 672Specifies the id value specified along with -fsdev option 673@item mount_tag=@var{mount_tag} 674Specifies the tag name to be used by the guest to mount this export point 675@end table 676 677ETEXI 678 679DEFHEADING() 680 681DEFHEADING(Virtual File system pass-through options:) 682 683DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs, 684 "-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n" 685 " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", 686 QEMU_ARCH_ALL) 687 688STEXI 689 690@item -virtfs @var{fsdriver}[,path=@var{path}],mount_tag=@var{mount_tag}[,security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] 691@findex -virtfs 692 693The general form of a Virtual File system pass-through options are: 694@table @option 695@item @var{fsdriver} 696This option specifies the fs driver backend to use. 697Currently "local", "handle" and "proxy" file system drivers are supported. 698@item id=@var{id} 699Specifies identifier for this device 700@item path=@var{path} 701Specifies the export path for the file system device. Files under 702this path will be available to the 9p client on the guest. 703@item security_model=@var{security_model} 704Specifies the security model to be used for this export path. 705Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". 706In "passthrough" security model, files are stored using the same 707credentials as they are created on the guest. This requires QEMU 708to run as root. In "mapped-xattr" security model, some of the file 709attributes like uid, gid, mode bits and link target are stored as 710file attributes. For "mapped-file" these attributes are stored in the 711hidden .virtfs_metadata directory. Directories exported by this security model cannot 712interact with other unix tools. "none" security model is same as 713passthrough except the sever won't report failures if it fails to 714set file attributes like ownership. Security model is mandatory only 715for local fsdriver. Other fsdrivers (like handle, proxy) don't take security 716model as a parameter. 717@item writeout=@var{writeout} 718This is an optional argument. The only supported value is "immediate". 719This means that host page cache will be used to read and write data but 720write notification will be sent to the guest only when the data has been 721reported as written by the storage subsystem. 722@item readonly 723Enables exporting 9p share as a readonly mount for guests. By default 724read-write access is given. 725@item socket=@var{socket} 726Enables proxy filesystem driver to use passed socket file for 727communicating with virtfs-proxy-helper. Usually a helper like libvirt 728will create socketpair and pass one of the fds as sock_fd 729@item sock_fd 730Enables proxy filesystem driver to use passed 'sock_fd' as the socket 731descriptor for interfacing with virtfs-proxy-helper 732@end table 733ETEXI 734 735DEF("virtfs_synth", 0, QEMU_OPTION_virtfs_synth, 736 "-virtfs_synth Create synthetic file system image\n", 737 QEMU_ARCH_ALL) 738STEXI 739@item -virtfs_synth 740@findex -virtfs_synth 741Create synthetic file system image 742ETEXI 743 744DEFHEADING() 745 746DEF("name", HAS_ARG, QEMU_OPTION_name, 747 "-name string1[,process=string2]\n" 748 " set the name of the guest\n" 749 " string1 sets the window title and string2 the process name (on Linux)\n", 750 QEMU_ARCH_ALL) 751STEXI 752@item -name @var{name} 753@findex -name 754Sets the @var{name} of the guest. 755This name will be displayed in the SDL window caption. 756The @var{name} will also be used for the VNC server. 757Also optionally set the top visible process name in Linux. 758ETEXI 759 760DEF("uuid", HAS_ARG, QEMU_OPTION_uuid, 761 "-uuid %08x-%04x-%04x-%04x-%012x\n" 762 " specify machine UUID\n", QEMU_ARCH_ALL) 763STEXI 764@item -uuid @var{uuid} 765@findex -uuid 766Set system UUID. 767ETEXI 768 769STEXI 770@end table 771ETEXI 772 773DEFHEADING() 774 775DEFHEADING(Display options:) 776 777STEXI 778@table @option 779ETEXI 780 781DEF("display", HAS_ARG, QEMU_OPTION_display, 782 "-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n" 783 " [,window_close=on|off]|curses|none|\n" 784 " vnc=<display>[,<optargs>]\n" 785 " select display type\n", QEMU_ARCH_ALL) 786STEXI 787@item -display @var{type} 788@findex -display 789Select type of display to use. This option is a replacement for the 790old style -sdl/-curses/... options. Valid values for @var{type} are 791@table @option 792@item sdl 793Display video output via SDL (usually in a separate graphics 794window; see the SDL documentation for other possibilities). 795@item curses 796Display video output via curses. For graphics device models which 797support a text mode, QEMU can display this output using a 798curses/ncurses interface. Nothing is displayed when the graphics 799device is in graphical mode or if the graphics device does not support 800a text mode. Generally only the VGA device models support text mode. 801@item none 802Do not display video output. The guest will still see an emulated 803graphics card, but its output will not be displayed to the QEMU 804user. This option differs from the -nographic option in that it 805only affects what is done with video output; -nographic also changes 806the destination of the serial and parallel port data. 807@item vnc 808Start a VNC server on display <arg> 809@end table 810ETEXI 811 812DEF("nographic", 0, QEMU_OPTION_nographic, 813 "-nographic disable graphical output and redirect serial I/Os to console\n", 814 QEMU_ARCH_ALL) 815STEXI 816@item -nographic 817@findex -nographic 818Normally, QEMU uses SDL to display the VGA output. With this option, 819you can totally disable graphical output so that QEMU is a simple 820command line application. The emulated serial port is redirected on 821the console. Therefore, you can still use QEMU to debug a Linux kernel 822with a serial console. 823ETEXI 824 825DEF("curses", 0, QEMU_OPTION_curses, 826 "-curses use a curses/ncurses interface instead of SDL\n", 827 QEMU_ARCH_ALL) 828STEXI 829@item -curses 830@findex curses 831Normally, QEMU uses SDL to display the VGA output. With this option, 832QEMU can display the VGA output when in text mode using a 833curses/ncurses interface. Nothing is displayed in graphical mode. 834ETEXI 835 836DEF("no-frame", 0, QEMU_OPTION_no_frame, 837 "-no-frame open SDL window without a frame and window decorations\n", 838 QEMU_ARCH_ALL) 839STEXI 840@item -no-frame 841@findex -no-frame 842Do not use decorations for SDL windows and start them using the whole 843available screen space. This makes the using QEMU in a dedicated desktop 844workspace more convenient. 845ETEXI 846 847DEF("alt-grab", 0, QEMU_OPTION_alt_grab, 848 "-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)\n", 849 QEMU_ARCH_ALL) 850STEXI 851@item -alt-grab 852@findex -alt-grab 853Use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt). Note that this also 854affects the special keys (for fullscreen, monitor-mode switching, etc). 855ETEXI 856 857DEF("ctrl-grab", 0, QEMU_OPTION_ctrl_grab, 858 "-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)\n", 859 QEMU_ARCH_ALL) 860STEXI 861@item -ctrl-grab 862@findex -ctrl-grab 863Use Right-Ctrl to grab mouse (instead of Ctrl-Alt). Note that this also 864affects the special keys (for fullscreen, monitor-mode switching, etc). 865ETEXI 866 867DEF("no-quit", 0, QEMU_OPTION_no_quit, 868 "-no-quit disable SDL window close capability\n", QEMU_ARCH_ALL) 869STEXI 870@item -no-quit 871@findex -no-quit 872Disable SDL window close capability. 873ETEXI 874 875DEF("sdl", 0, QEMU_OPTION_sdl, 876 "-sdl enable SDL\n", QEMU_ARCH_ALL) 877STEXI 878@item -sdl 879@findex -sdl 880Enable SDL. 881ETEXI 882 883DEF("spice", HAS_ARG, QEMU_OPTION_spice, 884 "-spice [port=port][,tls-port=secured-port][,x509-dir=<dir>]\n" 885 " [,x509-key-file=<file>][,x509-key-password=<file>]\n" 886 " [,x509-cert-file=<file>][,x509-cacert-file=<file>]\n" 887 " [,x509-dh-key-file=<file>][,addr=addr][,ipv4|ipv6]\n" 888 " [,tls-ciphers=<list>]\n" 889 " [,tls-channel=[main|display|cursor|inputs|record|playback]]\n" 890 " [,plaintext-channel=[main|display|cursor|inputs|record|playback]]\n" 891 " [,sasl][,password=<secret>][,disable-ticketing]\n" 892 " [,image-compression=[auto_glz|auto_lz|quic|glz|lz|off]]\n" 893 " [,jpeg-wan-compression=[auto|never|always]]\n" 894 " [,zlib-glz-wan-compression=[auto|never|always]]\n" 895 " [,streaming-video=[off|all|filter]][,disable-copy-paste]\n" 896 " [,agent-mouse=[on|off]][,playback-compression=[on|off]]\n" 897 " [,seamless-migration=[on|off]]\n" 898 " enable spice\n" 899 " at least one of {port, tls-port} is mandatory\n", 900 QEMU_ARCH_ALL) 901STEXI 902@item -spice @var{option}[,@var{option}[,...]] 903@findex -spice 904Enable the spice remote desktop protocol. Valid options are 905 906@table @option 907 908@item port=<nr> 909Set the TCP port spice is listening on for plaintext channels. 910 911@item addr=<addr> 912Set the IP address spice is listening on. Default is any address. 913 914@item ipv4 915@item ipv6 916Force using the specified IP version. 917 918@item password=<secret> 919Set the password you need to authenticate. 920 921@item sasl 922Require that the client use SASL to authenticate with the spice. 923The exact choice of authentication method used is controlled from the 924system / user's SASL configuration file for the 'qemu' service. This 925is typically found in /etc/sasl2/qemu.conf. If running QEMU as an 926unprivileged user, an environment variable SASL_CONF_PATH can be used 927to make it search alternate locations for the service config. 928While some SASL auth methods can also provide data encryption (eg GSSAPI), 929it is recommended that SASL always be combined with the 'tls' and 930'x509' settings to enable use of SSL and server certificates. This 931ensures a data encryption preventing compromise of authentication 932credentials. 933 934@item disable-ticketing 935Allow client connects without authentication. 936 937@item disable-copy-paste 938Disable copy paste between the client and the guest. 939 940@item tls-port=<nr> 941Set the TCP port spice is listening on for encrypted channels. 942 943@item x509-dir=<dir> 944Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir 945 946@item x509-key-file=<file> 947@item x509-key-password=<file> 948@item x509-cert-file=<file> 949@item x509-cacert-file=<file> 950@item x509-dh-key-file=<file> 951The x509 file names can also be configured individually. 952 953@item tls-ciphers=<list> 954Specify which ciphers to use. 955 956@item tls-channel=[main|display|cursor|inputs|record|playback] 957@item plaintext-channel=[main|display|cursor|inputs|record|playback] 958Force specific channel to be used with or without TLS encryption. The 959options can be specified multiple times to configure multiple 960channels. The special name "default" can be used to set the default 961mode. For channels which are not explicitly forced into one mode the 962spice client is allowed to pick tls/plaintext as he pleases. 963 964@item image-compression=[auto_glz|auto_lz|quic|glz|lz|off] 965Configure image compression (lossless). 966Default is auto_glz. 967 968@item jpeg-wan-compression=[auto|never|always] 969@item zlib-glz-wan-compression=[auto|never|always] 970Configure wan image compression (lossy for slow links). 971Default is auto. 972 973@item streaming-video=[off|all|filter] 974Configure video stream detection. Default is filter. 975 976@item agent-mouse=[on|off] 977Enable/disable passing mouse events via vdagent. Default is on. 978 979@item playback-compression=[on|off] 980Enable/disable audio stream compression (using celt 0.5.1). Default is on. 981 982@item seamless-migration=[on|off] 983Enable/disable spice seamless migration. Default is off. 984 985@end table 986ETEXI 987 988DEF("portrait", 0, QEMU_OPTION_portrait, 989 "-portrait rotate graphical output 90 deg left (only PXA LCD)\n", 990 QEMU_ARCH_ALL) 991STEXI 992@item -portrait 993@findex -portrait 994Rotate graphical output 90 deg left (only PXA LCD). 995ETEXI 996 997DEF("rotate", HAS_ARG, QEMU_OPTION_rotate, 998 "-rotate <deg> rotate graphical output some deg left (only PXA LCD)\n", 999 QEMU_ARCH_ALL) 1000STEXI 1001@item -rotate 1002@findex -rotate 1003Rotate graphical output some deg left (only PXA LCD). 1004ETEXI 1005 1006DEF("vga", HAS_ARG, QEMU_OPTION_vga, 1007 "-vga [std|cirrus|vmware|qxl|xenfb|none]\n" 1008 " select video card type\n", QEMU_ARCH_ALL) 1009STEXI 1010@item -vga @var{type} 1011@findex -vga 1012Select type of VGA card to emulate. Valid values for @var{type} are 1013@table @option 1014@item cirrus 1015Cirrus Logic GD5446 Video card. All Windows versions starting from 1016Windows 95 should recognize and use this graphic card. For optimal 1017performances, use 16 bit color depth in the guest and the host OS. 1018(This one is the default) 1019@item std 1020Standard VGA card with Bochs VBE extensions. If your guest OS 1021supports the VESA 2.0 VBE extensions (e.g. Windows XP) and if you want 1022to use high resolution modes (>= 1280x1024x16) then you should use 1023this option. 1024@item vmware 1025VMWare SVGA-II compatible adapter. Use it if you have sufficiently 1026recent XFree86/XOrg server or Windows guest with a driver for this 1027card. 1028@item qxl 1029QXL paravirtual graphic card. It is VGA compatible (including VESA 10302.0 VBE support). Works best with qxl guest drivers installed though. 1031Recommended choice when using the spice protocol. 1032@item none 1033Disable VGA card. 1034@end table 1035ETEXI 1036 1037DEF("full-screen", 0, QEMU_OPTION_full_screen, 1038 "-full-screen start in full screen\n", QEMU_ARCH_ALL) 1039STEXI 1040@item -full-screen 1041@findex -full-screen 1042Start in full screen. 1043ETEXI 1044 1045DEF("g", 1, QEMU_OPTION_g , 1046 "-g WxH[xDEPTH] Set the initial graphical resolution and depth\n", 1047 QEMU_ARCH_PPC | QEMU_ARCH_SPARC) 1048STEXI 1049@item -g @var{width}x@var{height}[x@var{depth}] 1050@findex -g 1051Set the initial graphical resolution and depth (PPC, SPARC only). 1052ETEXI 1053 1054DEF("vnc", HAS_ARG, QEMU_OPTION_vnc , 1055 "-vnc display start a VNC server on display\n", QEMU_ARCH_ALL) 1056STEXI 1057@item -vnc @var{display}[,@var{option}[,@var{option}[,...]]] 1058@findex -vnc 1059Normally, QEMU uses SDL to display the VGA output. With this option, 1060you can have QEMU listen on VNC display @var{display} and redirect the VGA 1061display over the VNC session. It is very useful to enable the usb 1062tablet device when using this option (option @option{-usbdevice 1063tablet}). When using the VNC display, you must use the @option{-k} 1064parameter to set the keyboard layout if you are not using en-us. Valid 1065syntax for the @var{display} is 1066 1067@table @option 1068 1069@item @var{host}:@var{d} 1070 1071TCP connections will only be allowed from @var{host} on display @var{d}. 1072By convention the TCP port is 5900+@var{d}. Optionally, @var{host} can 1073be omitted in which case the server will accept connections from any host. 1074 1075@item unix:@var{path} 1076 1077Connections will be allowed over UNIX domain sockets where @var{path} is the 1078location of a unix socket to listen for connections on. 1079 1080@item none 1081 1082VNC is initialized but not started. The monitor @code{change} command 1083can be used to later start the VNC server. 1084 1085@end table 1086 1087Following the @var{display} value there may be one or more @var{option} flags 1088separated by commas. Valid options are 1089 1090@table @option 1091 1092@item reverse 1093 1094Connect to a listening VNC client via a ``reverse'' connection. The 1095client is specified by the @var{display}. For reverse network 1096connections (@var{host}:@var{d},@code{reverse}), the @var{d} argument 1097is a TCP port number, not a display number. 1098 1099@item password 1100 1101Require that password based authentication is used for client connections. 1102 1103The password must be set separately using the @code{set_password} command in 1104the @ref{pcsys_monitor}. The syntax to change your password is: 1105@code{set_password <protocol> <password>} where <protocol> could be either 1106"vnc" or "spice". 1107 1108If you would like to change <protocol> password expiration, you should use 1109@code{expire_password <protocol> <expiration-time>} where expiration time could 1110be one of the following options: now, never, +seconds or UNIX time of 1111expiration, e.g. +60 to make password expire in 60 seconds, or 1335196800 1112to make password expire on "Mon Apr 23 12:00:00 EDT 2012" (UNIX time for this 1113date and time). 1114 1115You can also use keywords "now" or "never" for the expiration time to 1116allow <protocol> password to expire immediately or never expire. 1117 1118@item tls 1119 1120Require that client use TLS when communicating with the VNC server. This 1121uses anonymous TLS credentials so is susceptible to a man-in-the-middle 1122attack. It is recommended that this option be combined with either the 1123@option{x509} or @option{x509verify} options. 1124 1125@item x509=@var{/path/to/certificate/dir} 1126 1127Valid if @option{tls} is specified. Require that x509 credentials are used 1128for negotiating the TLS session. The server will send its x509 certificate 1129to the client. It is recommended that a password be set on the VNC server 1130to provide authentication of the client when this is used. The path following 1131this option specifies where the x509 certificates are to be loaded from. 1132See the @ref{vnc_security} section for details on generating certificates. 1133 1134@item x509verify=@var{/path/to/certificate/dir} 1135 1136Valid if @option{tls} is specified. Require that x509 credentials are used 1137for negotiating the TLS session. The server will send its x509 certificate 1138to the client, and request that the client send its own x509 certificate. 1139The server will validate the client's certificate against the CA certificate, 1140and reject clients when validation fails. If the certificate authority is 1141trusted, this is a sufficient authentication mechanism. You may still wish 1142to set a password on the VNC server as a second authentication layer. The 1143path following this option specifies where the x509 certificates are to 1144be loaded from. See the @ref{vnc_security} section for details on generating 1145certificates. 1146 1147@item sasl 1148 1149Require that the client use SASL to authenticate with the VNC server. 1150The exact choice of authentication method used is controlled from the 1151system / user's SASL configuration file for the 'qemu' service. This 1152is typically found in /etc/sasl2/qemu.conf. If running QEMU as an 1153unprivileged user, an environment variable SASL_CONF_PATH can be used 1154to make it search alternate locations for the service config. 1155While some SASL auth methods can also provide data encryption (eg GSSAPI), 1156it is recommended that SASL always be combined with the 'tls' and 1157'x509' settings to enable use of SSL and server certificates. This 1158ensures a data encryption preventing compromise of authentication 1159credentials. See the @ref{vnc_security} section for details on using 1160SASL authentication. 1161 1162@item acl 1163 1164Turn on access control lists for checking of the x509 client certificate 1165and SASL party. For x509 certs, the ACL check is made against the 1166certificate's distinguished name. This is something that looks like 1167@code{C=GB,O=ACME,L=Boston,CN=bob}. For SASL party, the ACL check is 1168made against the username, which depending on the SASL plugin, may 1169include a realm component, eg @code{bob} or @code{bob@@EXAMPLE.COM}. 1170When the @option{acl} flag is set, the initial access list will be 1171empty, with a @code{deny} policy. Thus no one will be allowed to 1172use the VNC server until the ACLs have been loaded. This can be 1173achieved using the @code{acl} monitor command. 1174 1175@item lossy 1176 1177Enable lossy compression methods (gradient, JPEG, ...). If this 1178option is set, VNC client may receive lossy framebuffer updates 1179depending on its encoding settings. Enabling this option can save 1180a lot of bandwidth at the expense of quality. 1181 1182@item non-adaptive 1183 1184Disable adaptive encodings. Adaptive encodings are enabled by default. 1185An adaptive encoding will try to detect frequently updated screen regions, 1186and send updates in these regions using a lossy encoding (like JPEG). 1187This can be really helpful to save bandwidth when playing videos. Disabling 1188adaptive encodings allows to restore the original static behavior of encodings 1189like Tight. 1190 1191@item share=[allow-exclusive|force-shared|ignore] 1192 1193Set display sharing policy. 'allow-exclusive' allows clients to ask 1194for exclusive access. As suggested by the rfb spec this is 1195implemented by dropping other connections. Connecting multiple 1196clients in parallel requires all clients asking for a shared session 1197(vncviewer: -shared switch). This is the default. 'force-shared' 1198disables exclusive client access. Useful for shared desktop sessions, 1199where you don't want someone forgetting specify -shared disconnect 1200everybody else. 'ignore' completely ignores the shared flag and 1201allows everybody connect unconditionally. Doesn't conform to the rfb 1202spec but is traditional QEMU behavior. 1203 1204@end table 1205ETEXI 1206 1207STEXI 1208@end table 1209ETEXI 1210 1211ARCHHEADING(, QEMU_ARCH_I386) 1212 1213ARCHHEADING(i386 target only:, QEMU_ARCH_I386) 1214STEXI 1215@table @option 1216ETEXI 1217 1218DEF("win2k-hack", 0, QEMU_OPTION_win2k_hack, 1219 "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n", 1220 QEMU_ARCH_I386) 1221STEXI 1222@item -win2k-hack 1223@findex -win2k-hack 1224Use it when installing Windows 2000 to avoid a disk full bug. After 1225Windows 2000 is installed, you no longer need this option (this option 1226slows down the IDE transfers). 1227ETEXI 1228 1229HXCOMM Deprecated by -rtc 1230DEF("rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack, "", QEMU_ARCH_I386) 1231 1232DEF("no-fd-bootchk", 0, QEMU_OPTION_no_fd_bootchk, 1233 "-no-fd-bootchk disable boot signature checking for floppy disks\n", 1234 QEMU_ARCH_I386) 1235STEXI 1236@item -no-fd-bootchk 1237@findex -no-fd-bootchk 1238Disable boot signature checking for floppy disks in Bochs BIOS. It may 1239be needed to boot from old floppy disks. 1240TODO: check reference to Bochs BIOS. 1241ETEXI 1242 1243DEF("no-acpi", 0, QEMU_OPTION_no_acpi, 1244 "-no-acpi disable ACPI\n", QEMU_ARCH_I386) 1245STEXI 1246@item -no-acpi 1247@findex -no-acpi 1248Disable ACPI (Advanced Configuration and Power Interface) support. Use 1249it if your guest OS complains about ACPI problems (PC target machine 1250only). 1251ETEXI 1252 1253DEF("no-hpet", 0, QEMU_OPTION_no_hpet, 1254 "-no-hpet disable HPET\n", QEMU_ARCH_I386) 1255STEXI 1256@item -no-hpet 1257@findex -no-hpet 1258Disable HPET support. 1259ETEXI 1260 1261DEF("acpitable", HAS_ARG, QEMU_OPTION_acpitable, 1262 "-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]\n" 1263 " ACPI table description\n", QEMU_ARCH_I386) 1264STEXI 1265@item -acpitable [sig=@var{str}][,rev=@var{n}][,oem_id=@var{str}][,oem_table_id=@var{str}][,oem_rev=@var{n}] [,asl_compiler_id=@var{str}][,asl_compiler_rev=@var{n}][,data=@var{file1}[:@var{file2}]...] 1266@findex -acpitable 1267Add ACPI table with specified header fields and context from specified files. 1268For file=, take whole ACPI table from the specified files, including all 1269ACPI headers (possible overridden by other options). 1270For data=, only data 1271portion of the table is used, all header information is specified in the 1272command line. 1273ETEXI 1274 1275DEF("smbios", HAS_ARG, QEMU_OPTION_smbios, 1276 "-smbios file=binary\n" 1277 " load SMBIOS entry from binary file\n" 1278 "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]\n" 1279 " specify SMBIOS type 0 fields\n" 1280 "-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]\n" 1281 " [,uuid=uuid][,sku=str][,family=str]\n" 1282 " specify SMBIOS type 1 fields\n", QEMU_ARCH_I386) 1283STEXI 1284@item -smbios file=@var{binary} 1285@findex -smbios 1286Load SMBIOS entry from binary file. 1287 1288@item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}] 1289@findex -smbios 1290Specify SMBIOS type 0 fields 1291 1292@item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}] [,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}] [,family=@var{str}] 1293Specify SMBIOS type 1 fields 1294ETEXI 1295 1296DEFHEADING() 1297STEXI 1298@end table 1299ETEXI 1300 1301DEFHEADING(Network options:) 1302STEXI 1303@table @option 1304ETEXI 1305 1306HXCOMM Legacy slirp options (now moved to -net user): 1307#ifdef CONFIG_SLIRP 1308DEF("tftp", HAS_ARG, QEMU_OPTION_tftp, "", QEMU_ARCH_ALL) 1309DEF("bootp", HAS_ARG, QEMU_OPTION_bootp, "", QEMU_ARCH_ALL) 1310DEF("redir", HAS_ARG, QEMU_OPTION_redir, "", QEMU_ARCH_ALL) 1311#ifndef _WIN32 1312DEF("smb", HAS_ARG, QEMU_OPTION_smb, "", QEMU_ARCH_ALL) 1313#endif 1314#endif 1315 1316DEF("net", HAS_ARG, QEMU_OPTION_net, 1317 "-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n" 1318 " create a new Network Interface Card and connect it to VLAN 'n'\n" 1319#ifdef CONFIG_SLIRP 1320 "-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]\n" 1321 " [,hostname=host][,dhcpstart=addr][,dns=addr][,dnssearch=domain][,tftp=dir]\n" 1322 " [,bootfile=f][,hostfwd=rule][,guestfwd=rule]" 1323#ifndef _WIN32 1324 "[,smb=dir[,smbserver=addr]]\n" 1325#endif 1326 " connect the user mode network stack to VLAN 'n', configure its\n" 1327 " DHCP server and enabled optional services\n" 1328#endif 1329#ifdef _WIN32 1330 "-net tap[,vlan=n][,name=str],ifname=name\n" 1331 " connect the host TAP network interface to VLAN 'n'\n" 1332#else 1333 "-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]\n" 1334 " connect the host TAP network interface to VLAN 'n' \n" 1335 " use network scripts 'file' (default=" DEFAULT_NETWORK_SCRIPT ")\n" 1336 " to configure it and 'dfile' (default=" DEFAULT_NETWORK_DOWN_SCRIPT ")\n" 1337 " to deconfigure it\n" 1338 " use '[down]script=no' to disable script execution\n" 1339 " use network helper 'helper' (default=" DEFAULT_BRIDGE_HELPER ") to\n" 1340 " configure it\n" 1341 " use 'fd=h' to connect to an already opened TAP interface\n" 1342 " use 'sndbuf=nbytes' to limit the size of the send buffer (the\n" 1343 " default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')\n" 1344 " use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag\n" 1345 " use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition\n" 1346 " use vhost=on to enable experimental in kernel accelerator\n" 1347 " (only has effect for virtio guests which use MSIX)\n" 1348 " use vhostforce=on to force vhost on for non-MSIX virtio guests\n" 1349 " use 'vhostfd=h' to connect to an already opened vhost net device\n" 1350 "-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]\n" 1351 " connects a host TAP network interface to a host bridge device 'br'\n" 1352 " (default=" DEFAULT_BRIDGE_INTERFACE ") using the program 'helper'\n" 1353 " (default=" DEFAULT_BRIDGE_HELPER ")\n" 1354#endif 1355 "-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]\n" 1356 " connect the vlan 'n' to another VLAN using a socket connection\n" 1357 "-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]\n" 1358 " connect the vlan 'n' to multicast maddr and port\n" 1359 " use 'localaddr=addr' to specify the host address to send packets from\n" 1360 "-net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]\n" 1361 " connect the vlan 'n' to another VLAN using an UDP tunnel\n" 1362#ifdef CONFIG_VDE 1363 "-net vde[,vlan=n][,name=str][,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n" 1364 " connect the vlan 'n' to port 'n' of a vde switch running\n" 1365 " on host and listening for incoming connections on 'socketpath'.\n" 1366 " Use group 'groupname' and mode 'octalmode' to change default\n" 1367 " ownership and permissions for communication port.\n" 1368#endif 1369 "-net dump[,vlan=n][,file=f][,len=n]\n" 1370 " dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n" 1371 "-net none use it alone to have zero network devices. If no -net option\n" 1372 " is provided, the default is '-net nic -net user'\n", QEMU_ARCH_ALL) 1373DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, 1374 "-netdev [" 1375#ifdef CONFIG_SLIRP 1376 "user|" 1377#endif 1378 "tap|" 1379 "bridge|" 1380#ifdef CONFIG_VDE 1381 "vde|" 1382#endif 1383 "socket],id=str[,option][,option][,...]\n", QEMU_ARCH_ALL) 1384STEXI 1385@item -net nic[,vlan=@var{n}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}] 1386@findex -net 1387Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n} 1388= 0 is the default). The NIC is an e1000 by default on the PC 1389target. Optionally, the MAC address can be changed to @var{mac}, the 1390device address set to @var{addr} (PCI cards only), 1391and a @var{name} can be assigned for use in monitor commands. 1392Optionally, for PCI cards, you can specify the number @var{v} of MSI-X vectors 1393that the card should have; this option currently only affects virtio cards; set 1394@var{v} = 0 to disable MSI-X. If no @option{-net} option is specified, a single 1395NIC is created. QEMU can emulate several different models of network card. 1396Valid values for @var{type} are 1397@code{virtio}, @code{i82551}, @code{i82557b}, @code{i82559er}, 1398@code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139}, 1399@code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}. 1400Not all devices are supported on all targets. Use @code{-net nic,model=help} 1401for a list of available devices for your target. 1402 1403@item -netdev user,id=@var{id}[,@var{option}][,@var{option}][,...] 1404@item -net user[,@var{option}][,@var{option}][,...] 1405Use the user mode network stack which requires no administrator 1406privilege to run. Valid options are: 1407 1408@table @option 1409@item vlan=@var{n} 1410Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default). 1411 1412@item id=@var{id} 1413@item name=@var{name} 1414Assign symbolic name for use in monitor commands. 1415 1416@item net=@var{addr}[/@var{mask}] 1417Set IP network address the guest will see. Optionally specify the netmask, 1418either in the form a.b.c.d or as number of valid top-most bits. Default is 141910.0.2.0/24. 1420 1421@item host=@var{addr} 1422Specify the guest-visible address of the host. Default is the 2nd IP in the 1423guest network, i.e. x.x.x.2. 1424 1425@item restrict=on|off 1426If this option is enabled, the guest will be isolated, i.e. it will not be 1427able to contact the host and no guest IP packets will be routed over the host 1428to the outside. This option does not affect any explicitly set forwarding rules. 1429 1430@item hostname=@var{name} 1431Specifies the client hostname reported by the built-in DHCP server. 1432 1433@item dhcpstart=@var{addr} 1434Specify the first of the 16 IPs the built-in DHCP server can assign. Default 1435is the 15th to 31st IP in the guest network, i.e. x.x.x.15 to x.x.x.31. 1436 1437@item dns=@var{addr} 1438Specify the guest-visible address of the virtual nameserver. The address must 1439be different from the host address. Default is the 3rd IP in the guest network, 1440i.e. x.x.x.3. 1441 1442@item dnssearch=@var{domain} 1443Provides an entry for the domain-search list sent by the built-in 1444DHCP server. More than one domain suffix can be transmitted by specifying 1445this option multiple times. If supported, this will cause the guest to 1446automatically try to append the given domain suffix(es) in case a domain name 1447can not be resolved. 1448 1449Example: 1450@example 1451qemu -net user,dnssearch=mgmt.example.org,dnssearch=example.org [...] 1452@end example 1453 1454@item tftp=@var{dir} 1455When using the user mode network stack, activate a built-in TFTP 1456server. The files in @var{dir} will be exposed as the root of a TFTP server. 1457The TFTP client on the guest must be configured in binary mode (use the command 1458@code{bin} of the Unix TFTP client). 1459 1460@item bootfile=@var{file} 1461When using the user mode network stack, broadcast @var{file} as the BOOTP 1462filename. In conjunction with @option{tftp}, this can be used to network boot 1463a guest from a local directory. 1464 1465Example (using pxelinux): 1466@example 1467qemu-system-i386 -hda linux.img -boot n -net user,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 1468@end example 1469 1470@item smb=@var{dir}[,smbserver=@var{addr}] 1471When using the user mode network stack, activate a built-in SMB 1472server so that Windows OSes can access to the host files in @file{@var{dir}} 1473transparently. The IP address of the SMB server can be set to @var{addr}. By 1474default the 4th IP in the guest network is used, i.e. x.x.x.4. 1475 1476In the guest Windows OS, the line: 1477@example 147810.0.2.4 smbserver 1479@end example 1480must be added in the file @file{C:\WINDOWS\LMHOSTS} (for windows 9x/Me) 1481or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows NT/2000). 1482 1483Then @file{@var{dir}} can be accessed in @file{\\smbserver\qemu}. 1484 1485Note that a SAMBA server must be installed on the host OS. 1486QEMU was tested successfully with smbd versions from Red Hat 9, 1487Fedora Core 3 and OpenSUSE 11.x. 1488 1489@item hostfwd=[tcp|udp]:[@var{hostaddr}]:@var{hostport}-[@var{guestaddr}]:@var{guestport} 1490Redirect incoming TCP or UDP connections to the host port @var{hostport} to 1491the guest IP address @var{guestaddr} on guest port @var{guestport}. If 1492@var{guestaddr} is not specified, its value is x.x.x.15 (default first address 1493given by the built-in DHCP server). By specifying @var{hostaddr}, the rule can 1494be bound to a specific host interface. If no connection type is set, TCP is 1495used. This option can be given multiple times. 1496 1497For example, to redirect host X11 connection from screen 1 to guest 1498screen 0, use the following: 1499 1500@example 1501# on the host 1502qemu-system-i386 -net user,hostfwd=tcp:127.0.0.1:6001-:6000 [...] 1503# this host xterm should open in the guest X11 server 1504xterm -display :1 1505@end example 1506 1507To redirect telnet connections from host port 5555 to telnet port on 1508the guest, use the following: 1509 1510@example 1511# on the host 1512qemu-system-i386 -net user,hostfwd=tcp::5555-:23 [...] 1513telnet localhost 5555 1514@end example 1515 1516Then when you use on the host @code{telnet localhost 5555}, you 1517connect to the guest telnet server. 1518 1519@item guestfwd=[tcp]:@var{server}:@var{port}-@var{dev} 1520@item guestfwd=[tcp]:@var{server}:@var{port}-@var{cmd:command} 1521Forward guest TCP connections to the IP address @var{server} on port @var{port} 1522to the character device @var{dev} or to a program executed by @var{cmd:command} 1523which gets spawned for each connection. This option can be given multiple times. 1524 1525You can either use a chardev directly and have that one used throughout QEMU's 1526lifetime, like in the following example: 1527 1528@example 1529# open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever 1530# the guest accesses it 1531qemu -net user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321 [...] 1532@end example 1533 1534Or you can execute a command on every TCP connection established by the guest, 1535so that QEMU behaves similar to an inetd process for that virtual server: 1536 1537@example 1538# call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234 1539# and connect the TCP stream to its stdin/stdout 1540qemu -net 'user,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321' 1541@end example 1542 1543@end table 1544 1545Note: Legacy stand-alone options -tftp, -bootp, -smb and -redir are still 1546processed and applied to -net user. Mixing them with the new configuration 1547syntax gives undefined results. Their use for new applications is discouraged 1548as they will be removed from future versions. 1549 1550@item -netdev tap,id=@var{id}[,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}] 1551@item -net tap[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}] 1552Connect the host TAP network interface @var{name} to VLAN @var{n}. 1553 1554Use the network script @var{file} to configure it and the network script 1555@var{dfile} to deconfigure it. If @var{name} is not provided, the OS 1556automatically provides one. The default network configure script is 1557@file{/etc/qemu-ifup} and the default network deconfigure script is 1558@file{/etc/qemu-ifdown}. Use @option{script=no} or @option{downscript=no} 1559to disable script execution. 1560 1561If running QEMU as an unprivileged user, use the network helper 1562@var{helper} to configure the TAP interface. The default network 1563helper executable is @file{/usr/local/libexec/qemu-bridge-helper}. 1564 1565@option{fd}=@var{h} can be used to specify the handle of an already 1566opened host TAP interface. 1567 1568Examples: 1569 1570@example 1571#launch a QEMU instance with the default network script 1572qemu-system-i386 linux.img -net nic -net tap 1573@end example 1574 1575@example 1576#launch a QEMU instance with two NICs, each one connected 1577#to a TAP device 1578qemu-system-i386 linux.img \ 1579 -net nic,vlan=0 -net tap,vlan=0,ifname=tap0 \ 1580 -net nic,vlan=1 -net tap,vlan=1,ifname=tap1 1581@end example 1582 1583@example 1584#launch a QEMU instance with the default network helper to 1585#connect a TAP device to bridge br0 1586qemu-system-i386 linux.img \ 1587 -net nic -net tap,"helper=/usr/local/libexec/qemu-bridge-helper" 1588@end example 1589 1590@item -netdev bridge,id=@var{id}[,br=@var{bridge}][,helper=@var{helper}] 1591@item -net bridge[,vlan=@var{n}][,name=@var{name}][,br=@var{bridge}][,helper=@var{helper}] 1592Connect a host TAP network interface to a host bridge device. 1593 1594Use the network helper @var{helper} to configure the TAP interface and 1595attach it to the bridge. The default network helper executable is 1596@file{/usr/local/libexec/qemu-bridge-helper} and the default bridge 1597device is @file{br0}. 1598 1599Examples: 1600 1601@example 1602#launch a QEMU instance with the default network helper to 1603#connect a TAP device to bridge br0 1604qemu-system-i386 linux.img -net bridge -net nic,model=virtio 1605@end example 1606 1607@example 1608#launch a QEMU instance with the default network helper to 1609#connect a TAP device to bridge qemubr0 1610qemu-system-i386 linux.img -net bridge,br=qemubr0 -net nic,model=virtio 1611@end example 1612 1613@item -netdev socket,id=@var{id}[,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] 1614@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}] [,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] 1615 1616Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual 1617machine using a TCP socket connection. If @option{listen} is 1618specified, QEMU waits for incoming connections on @var{port} 1619(@var{host} is optional). @option{connect} is used to connect to 1620another QEMU instance using the @option{listen} option. @option{fd}=@var{h} 1621specifies an already opened TCP socket. 1622 1623Example: 1624@example 1625# launch a first QEMU instance 1626qemu-system-i386 linux.img \ 1627 -net nic,macaddr=52:54:00:12:34:56 \ 1628 -net socket,listen=:1234 1629# connect the VLAN 0 of this instance to the VLAN 0 1630# of the first instance 1631qemu-system-i386 linux.img \ 1632 -net nic,macaddr=52:54:00:12:34:57 \ 1633 -net socket,connect=127.0.0.1:1234 1634@end example 1635 1636@item -netdev socket,id=@var{id}[,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] 1637@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] 1638 1639Create a VLAN @var{n} shared with another QEMU virtual 1640machines using a UDP multicast socket, effectively making a bus for 1641every QEMU with same multicast address @var{maddr} and @var{port}. 1642NOTES: 1643@enumerate 1644@item 1645Several QEMU can be running on different hosts and share same bus (assuming 1646correct multicast setup for these hosts). 1647@item 1648mcast support is compatible with User Mode Linux (argument @option{eth@var{N}=mcast}), see 1649@url{http://user-mode-linux.sf.net}. 1650@item 1651Use @option{fd=h} to specify an already opened UDP multicast socket. 1652@end enumerate 1653 1654Example: 1655@example 1656# launch one QEMU instance 1657qemu-system-i386 linux.img \ 1658 -net nic,macaddr=52:54:00:12:34:56 \ 1659 -net socket,mcast=230.0.0.1:1234 1660# launch another QEMU instance on same "bus" 1661qemu-system-i386 linux.img \ 1662 -net nic,macaddr=52:54:00:12:34:57 \ 1663 -net socket,mcast=230.0.0.1:1234 1664# launch yet another QEMU instance on same "bus" 1665qemu-system-i386 linux.img \ 1666 -net nic,macaddr=52:54:00:12:34:58 \ 1667 -net socket,mcast=230.0.0.1:1234 1668@end example 1669 1670Example (User Mode Linux compat.): 1671@example 1672# launch QEMU instance (note mcast address selected 1673# is UML's default) 1674qemu-system-i386 linux.img \ 1675 -net nic,macaddr=52:54:00:12:34:56 \ 1676 -net socket,mcast=239.192.168.1:1102 1677# launch UML 1678/path/to/linux ubd0=/path/to/root_fs eth0=mcast 1679@end example 1680 1681Example (send packets from host's 1.2.3.4): 1682@example 1683qemu-system-i386 linux.img \ 1684 -net nic,macaddr=52:54:00:12:34:56 \ 1685 -net socket,mcast=239.192.168.1:1102,localaddr=1.2.3.4 1686@end example 1687 1688@item -netdev vde,id=@var{id}[,sock=@var{socketpath}][,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] 1689@item -net vde[,vlan=@var{n}][,name=@var{name}][,sock=@var{socketpath}] [,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] 1690Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and 1691listening for incoming connections on @var{socketpath}. Use GROUP @var{groupname} 1692and MODE @var{octalmode} to change default ownership and permissions for 1693communication port. This option is only available if QEMU has been compiled 1694with vde support enabled. 1695 1696Example: 1697@example 1698# launch vde switch 1699vde_switch -F -sock /tmp/myswitch 1700# launch QEMU instance 1701qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch 1702@end example 1703 1704@item -net dump[,vlan=@var{n}][,file=@var{file}][,len=@var{len}] 1705Dump network traffic on VLAN @var{n} to file @var{file} (@file{qemu-vlan0.pcap} by default). 1706At most @var{len} bytes (64k by default) per packet are stored. The file format is 1707libpcap, so it can be analyzed with tools such as tcpdump or Wireshark. 1708 1709@item -net none 1710Indicate that no network devices should be configured. It is used to 1711override the default configuration (@option{-net nic -net user}) which 1712is activated if no @option{-net} options are provided. 1713 1714@end table 1715ETEXI 1716 1717DEFHEADING() 1718 1719DEFHEADING(Character device options:) 1720 1721DEF("chardev", HAS_ARG, QEMU_OPTION_chardev, 1722 "-chardev null,id=id[,mux=on|off]\n" 1723 "-chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]\n" 1724 " [,server][,nowait][,telnet][,mux=on|off] (tcp)\n" 1725 "-chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)\n" 1726 "-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n" 1727 " [,localport=localport][,ipv4][,ipv6][,mux=on|off]\n" 1728 "-chardev msmouse,id=id[,mux=on|off]\n" 1729 "-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n" 1730 " [,mux=on|off]\n" 1731 "-chardev file,id=id,path=path[,mux=on|off]\n" 1732 "-chardev pipe,id=id,path=path[,mux=on|off]\n" 1733#ifdef _WIN32 1734 "-chardev console,id=id[,mux=on|off]\n" 1735 "-chardev serial,id=id,path=path[,mux=on|off]\n" 1736#else 1737 "-chardev pty,id=id[,mux=on|off]\n" 1738 "-chardev stdio,id=id[,mux=on|off][,signal=on|off]\n" 1739#endif 1740#ifdef CONFIG_BRLAPI 1741 "-chardev braille,id=id[,mux=on|off]\n" 1742#endif 1743#if defined(__linux__) || defined(__sun__) || defined(__FreeBSD__) \ 1744 || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) 1745 "-chardev tty,id=id,path=path[,mux=on|off]\n" 1746#endif 1747#if defined(__linux__) || defined(__FreeBSD__) || defined(__DragonFly__) 1748 "-chardev parport,id=id,path=path[,mux=on|off]\n" 1749#endif 1750#if defined(CONFIG_SPICE) 1751 "-chardev spicevmc,id=id,name=name[,debug=debug]\n" 1752#endif 1753 , QEMU_ARCH_ALL 1754) 1755 1756STEXI 1757 1758The general form of a character device option is: 1759@table @option 1760 1761@item -chardev @var{backend} ,id=@var{id} [,mux=on|off] [,@var{options}] 1762@findex -chardev 1763Backend is one of: 1764@option{null}, 1765@option{socket}, 1766@option{udp}, 1767@option{msmouse}, 1768@option{vc}, 1769@option{file}, 1770@option{pipe}, 1771@option{console}, 1772@option{serial}, 1773@option{pty}, 1774@option{stdio}, 1775@option{braille}, 1776@option{tty}, 1777@option{parport}, 1778@option{spicevmc}. 1779The specific backend will determine the applicable options. 1780 1781All devices must have an id, which can be any string up to 127 characters long. 1782It is used to uniquely identify this device in other command line directives. 1783 1784A character device may be used in multiplexing mode by multiple front-ends. 1785The key sequence of @key{Control-a} and @key{c} will rotate the input focus 1786between attached front-ends. Specify @option{mux=on} to enable this mode. 1787 1788Options to each backend are described below. 1789 1790@item -chardev null ,id=@var{id} 1791A void device. This device will not emit any data, and will drop any data it 1792receives. The null backend does not take any options. 1793 1794@item -chardev socket ,id=@var{id} [@var{TCP options} or @var{unix options}] [,server] [,nowait] [,telnet] 1795 1796Create a two-way stream socket, which can be either a TCP or a unix socket. A 1797unix socket will be created if @option{path} is specified. Behaviour is 1798undefined if TCP options are specified for a unix socket. 1799 1800@option{server} specifies that the socket shall be a listening socket. 1801 1802@option{nowait} specifies that QEMU should not block waiting for a client to 1803connect to a listening socket. 1804 1805@option{telnet} specifies that traffic on the socket should interpret telnet 1806escape sequences. 1807 1808TCP and unix socket options are given below: 1809 1810@table @option 1811 1812@item TCP options: port=@var{port} [,host=@var{host}] [,to=@var{to}] [,ipv4] [,ipv6] [,nodelay] 1813 1814@option{host} for a listening socket specifies the local address to be bound. 1815For a connecting socket species the remote host to connect to. @option{host} is 1816optional for listening sockets. If not specified it defaults to @code{0.0.0.0}. 1817 1818@option{port} for a listening socket specifies the local port to be bound. For a 1819connecting socket specifies the port on the remote host to connect to. 1820@option{port} can be given as either a port number or a service name. 1821@option{port} is required. 1822 1823@option{to} is only relevant to listening sockets. If it is specified, and 1824@option{port} cannot be bound, QEMU will attempt to bind to subsequent ports up 1825to and including @option{to} until it succeeds. @option{to} must be specified 1826as a port number. 1827 1828@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. 1829If neither is specified the socket may use either protocol. 1830 1831@option{nodelay} disables the Nagle algorithm. 1832 1833@item unix options: path=@var{path} 1834 1835@option{path} specifies the local path of the unix socket. @option{path} is 1836required. 1837 1838@end table 1839 1840@item -chardev udp ,id=@var{id} [,host=@var{host}] ,port=@var{port} [,localaddr=@var{localaddr}] [,localport=@var{localport}] [,ipv4] [,ipv6] 1841 1842Sends all traffic from the guest to a remote host over UDP. 1843 1844@option{host} specifies the remote host to connect to. If not specified it 1845defaults to @code{localhost}. 1846 1847@option{port} specifies the port on the remote host to connect to. @option{port} 1848is required. 1849 1850@option{localaddr} specifies the local address to bind to. If not specified it 1851defaults to @code{0.0.0.0}. 1852 1853@option{localport} specifies the local port to bind to. If not specified any 1854available local port will be used. 1855 1856@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. 1857If neither is specified the device may use either protocol. 1858 1859@item -chardev msmouse ,id=@var{id} 1860 1861Forward QEMU's emulated msmouse events to the guest. @option{msmouse} does not 1862take any options. 1863 1864@item -chardev vc ,id=@var{id} [[,width=@var{width}] [,height=@var{height}]] [[,cols=@var{cols}] [,rows=@var{rows}]] 1865 1866Connect to a QEMU text console. @option{vc} may optionally be given a specific 1867size. 1868 1869@option{width} and @option{height} specify the width and height respectively of 1870the console, in pixels. 1871 1872@option{cols} and @option{rows} specify that the console be sized to fit a text 1873console with the given dimensions. 1874 1875@item -chardev file ,id=@var{id} ,path=@var{path} 1876 1877Log all traffic received from the guest to a file. 1878 1879@option{path} specifies the path of the file to be opened. This file will be 1880created if it does not already exist, and overwritten if it does. @option{path} 1881is required. 1882 1883@item -chardev pipe ,id=@var{id} ,path=@var{path} 1884 1885Create a two-way connection to the guest. The behaviour differs slightly between 1886Windows hosts and other hosts: 1887 1888On Windows, a single duplex pipe will be created at 1889@file{\\.pipe\@option{path}}. 1890 1891On other hosts, 2 pipes will be created called @file{@option{path}.in} and 1892@file{@option{path}.out}. Data written to @file{@option{path}.in} will be 1893received by the guest. Data written by the guest can be read from 1894@file{@option{path}.out}. QEMU will not create these fifos, and requires them to 1895be present. 1896 1897@option{path} forms part of the pipe path as described above. @option{path} is 1898required. 1899 1900@item -chardev console ,id=@var{id} 1901 1902Send traffic from the guest to QEMU's standard output. @option{console} does not 1903take any options. 1904 1905@option{console} is only available on Windows hosts. 1906 1907@item -chardev serial ,id=@var{id} ,path=@option{path} 1908 1909Send traffic from the guest to a serial device on the host. 1910 1911@option{serial} is 1912only available on Windows hosts. 1913 1914@option{path} specifies the name of the serial device to open. 1915 1916@item -chardev pty ,id=@var{id} 1917 1918Create a new pseudo-terminal on the host and connect to it. @option{pty} does 1919not take any options. 1920 1921@option{pty} is not available on Windows hosts. 1922 1923@item -chardev stdio ,id=@var{id} [,signal=on|off] 1924Connect to standard input and standard output of the QEMU process. 1925 1926@option{signal} controls if signals are enabled on the terminal, that includes 1927exiting QEMU with the key sequence @key{Control-c}. This option is enabled by 1928default, use @option{signal=off} to disable it. 1929 1930@option{stdio} is not available on Windows hosts. 1931 1932@item -chardev braille ,id=@var{id} 1933 1934Connect to a local BrlAPI server. @option{braille} does not take any options. 1935 1936@item -chardev tty ,id=@var{id} ,path=@var{path} 1937 1938Connect to a local tty device. 1939 1940@option{tty} is only available on Linux, Sun, FreeBSD, NetBSD, OpenBSD and 1941DragonFlyBSD hosts. 1942 1943@option{path} specifies the path to the tty. @option{path} is required. 1944 1945@item -chardev parport ,id=@var{id} ,path=@var{path} 1946 1947@option{parport} is only available on Linux, FreeBSD and DragonFlyBSD hosts. 1948 1949Connect to a local parallel port. 1950 1951@option{path} specifies the path to the parallel port device. @option{path} is 1952required. 1953 1954@item -chardev spicevmc ,id=@var{id} ,debug=@var{debug}, name=@var{name} 1955 1956@option{spicevmc} is only available when spice support is built in. 1957 1958@option{debug} debug level for spicevmc 1959 1960@option{name} name of spice channel to connect to 1961 1962Connect to a spice virtual machine channel, such as vdiport. 1963 1964@end table 1965ETEXI 1966 1967DEFHEADING() 1968 1969STEXI 1970DEFHEADING(Device URL Syntax:) 1971 1972In addition to using normal file images for the emulated storage devices, 1973QEMU can also use networked resources such as iSCSI devices. These are 1974specified using a special URL syntax. 1975 1976@table @option 1977@item iSCSI 1978iSCSI support allows QEMU to access iSCSI resources directly and use as 1979images for the guest storage. Both disk and cdrom images are supported. 1980 1981Syntax for specifying iSCSI LUNs is 1982``iscsi://<target-ip>[:<port>]/<target-iqn>/<lun>'' 1983 1984By default qemu will use the iSCSI initiator-name 1985'iqn.2008-11.org.linux-kvm[:<name>]' but this can also be set from the command 1986line or a configuration file. 1987 1988 1989Example (without authentication): 1990@example 1991qemu-system-i386 -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ 1992 -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ 1993 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 1994@end example 1995 1996Example (CHAP username/password via URL): 1997@example 1998qemu-system-i386 -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1 1999@end example 2000 2001Example (CHAP username/password via environment variables): 2002@example 2003LIBISCSI_CHAP_USERNAME="user" \ 2004LIBISCSI_CHAP_PASSWORD="password" \ 2005qemu-system-i386 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 2006@end example 2007 2008iSCSI support is an optional feature of QEMU and only available when 2009compiled and linked against libiscsi. 2010ETEXI 2011DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi, 2012 "-iscsi [user=user][,password=password]\n" 2013 " [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n" 2014 " [,initiator-name=iqn]\n" 2015 " iSCSI session parameters\n", QEMU_ARCH_ALL) 2016STEXI 2017 2018iSCSI parameters such as username and password can also be specified via 2019a configuration file. See qemu-doc for more information and examples. 2020 2021@item NBD 2022QEMU supports NBD (Network Block Devices) both using TCP protocol as well 2023as Unix Domain Sockets. 2024 2025Syntax for specifying a NBD device using TCP 2026``nbd:<server-ip>:<port>[:exportname=<export>]'' 2027 2028Syntax for specifying a NBD device using Unix Domain Sockets 2029``nbd:unix:<domain-socket>[:exportname=<export>]'' 2030 2031 2032Example for TCP 2033@example 2034qemu-system-i386 --drive file=nbd:192.0.2.1:30000 2035@end example 2036 2037Example for Unix Domain Sockets 2038@example 2039qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket 2040@end example 2041 2042@item Sheepdog 2043Sheepdog is a distributed storage system for QEMU. 2044QEMU supports using either local sheepdog devices or remote networked 2045devices. 2046 2047Syntax for specifying a sheepdog device 2048@table @list 2049``sheepdog:<vdiname>'' 2050 2051``sheepdog:<vdiname>:<snapid>'' 2052 2053``sheepdog:<vdiname>:<tag>'' 2054 2055``sheepdog:<host>:<port>:<vdiname>'' 2056 2057``sheepdog:<host>:<port>:<vdiname>:<snapid>'' 2058 2059``sheepdog:<host>:<port>:<vdiname>:<tag>'' 2060@end table 2061 2062Example 2063@example 2064qemu-system-i386 --drive file=sheepdog:192.0.2.1:30000:MyVirtualMachine 2065@end example 2066 2067See also @url{http://http://www.osrg.net/sheepdog/}. 2068 2069@item GlusterFS 2070GlusterFS is an user space distributed file system. 2071QEMU supports the use of GlusterFS volumes for hosting VM disk images using 2072TCP, Unix Domain Sockets and RDMA transport protocols. 2073 2074Syntax for specifying a VM disk image on GlusterFS volume is 2075@example 2076gluster[+transport]://[server[:port]]/volname/image[?socket=...] 2077@end example 2078 2079 2080Example 2081@example 2082qemu-system-x86_84 --drive file=gluster://192.0.2.1/testvol/a.img 2083@end example 2084 2085See also @url{http://www.gluster.org}. 2086@end table 2087ETEXI 2088 2089DEFHEADING(Bluetooth(R) options:) 2090 2091DEF("bt", HAS_ARG, QEMU_OPTION_bt, \ 2092 "-bt hci,null dumb bluetooth HCI - doesn't respond to commands\n" \ 2093 "-bt hci,host[:id]\n" \ 2094 " use host's HCI with the given name\n" \ 2095 "-bt hci[,vlan=n]\n" \ 2096 " emulate a standard HCI in virtual scatternet 'n'\n" \ 2097 "-bt vhci[,vlan=n]\n" \ 2098 " add host computer to virtual scatternet 'n' using VHCI\n" \ 2099 "-bt device:dev[,vlan=n]\n" \ 2100 " emulate a bluetooth device 'dev' in scatternet 'n'\n", 2101 QEMU_ARCH_ALL) 2102STEXI 2103@table @option 2104 2105@item -bt hci[...] 2106@findex -bt 2107Defines the function of the corresponding Bluetooth HCI. -bt options 2108are matched with the HCIs present in the chosen machine type. For 2109example when emulating a machine with only one HCI built into it, only 2110the first @code{-bt hci[...]} option is valid and defines the HCI's 2111logic. The Transport Layer is decided by the machine type. Currently 2112the machines @code{n800} and @code{n810} have one HCI and all other 2113machines have none. 2114 2115@anchor{bt-hcis} 2116The following three types are recognized: 2117 2118@table @option 2119@item -bt hci,null 2120(default) The corresponding Bluetooth HCI assumes no internal logic 2121and will not respond to any HCI commands or emit events. 2122 2123@item -bt hci,host[:@var{id}] 2124(@code{bluez} only) The corresponding HCI passes commands / events 2125to / from the physical HCI identified by the name @var{id} (default: 2126@code{hci0}) on the computer running QEMU. Only available on @code{bluez} 2127capable systems like Linux. 2128 2129@item -bt hci[,vlan=@var{n}] 2130Add a virtual, standard HCI that will participate in the Bluetooth 2131scatternet @var{n} (default @code{0}). Similarly to @option{-net} 2132VLANs, devices inside a bluetooth network @var{n} can only communicate 2133with other devices in the same network (scatternet). 2134@end table 2135 2136@item -bt vhci[,vlan=@var{n}] 2137(Linux-host only) Create a HCI in scatternet @var{n} (default 0) attached 2138to the host bluetooth stack instead of to the emulated target. This 2139allows the host and target machines to participate in a common scatternet 2140and communicate. Requires the Linux @code{vhci} driver installed. Can 2141be used as following: 2142 2143@example 2144qemu-system-i386 [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5 2145@end example 2146 2147@item -bt device:@var{dev}[,vlan=@var{n}] 2148Emulate a bluetooth device @var{dev} and place it in network @var{n} 2149(default @code{0}). QEMU can only emulate one type of bluetooth devices 2150currently: 2151 2152@table @option 2153@item keyboard 2154Virtual wireless keyboard implementing the HIDP bluetooth profile. 2155@end table 2156@end table 2157ETEXI 2158 2159DEFHEADING() 2160 2161DEFHEADING(Linux/Multiboot boot specific:) 2162STEXI 2163 2164When using these options, you can use a given Linux or Multiboot 2165kernel without installing it in the disk image. It can be useful 2166for easier testing of various kernels. 2167 2168@table @option 2169ETEXI 2170 2171DEF("kernel", HAS_ARG, QEMU_OPTION_kernel, \ 2172 "-kernel bzImage use 'bzImage' as kernel image\n", QEMU_ARCH_ALL) 2173STEXI 2174@item -kernel @var{bzImage} 2175@findex -kernel 2176Use @var{bzImage} as kernel image. The kernel can be either a Linux kernel 2177or in multiboot format. 2178ETEXI 2179 2180DEF("append", HAS_ARG, QEMU_OPTION_append, \ 2181 "-append cmdline use 'cmdline' as kernel command line\n", QEMU_ARCH_ALL) 2182STEXI 2183@item -append @var{cmdline} 2184@findex -append 2185Use @var{cmdline} as kernel command line 2186ETEXI 2187 2188DEF("initrd", HAS_ARG, QEMU_OPTION_initrd, \ 2189 "-initrd file use 'file' as initial ram disk\n", QEMU_ARCH_ALL) 2190STEXI 2191@item -initrd @var{file} 2192@findex -initrd 2193Use @var{file} as initial ram disk. 2194 2195@item -initrd "@var{file1} arg=foo,@var{file2}" 2196 2197This syntax is only available with multiboot. 2198 2199Use @var{file1} and @var{file2} as modules and pass arg=foo as parameter to the 2200first module. 2201ETEXI 2202 2203DEF("dtb", HAS_ARG, QEMU_OPTION_dtb, \ 2204 "-dtb file use 'file' as device tree image\n", QEMU_ARCH_ALL) 2205STEXI 2206@item -dtb @var{file} 2207@findex -dtb 2208Use @var{file} as a device tree binary (dtb) image and pass it to the kernel 2209on boot. 2210ETEXI 2211 2212STEXI 2213@end table 2214ETEXI 2215 2216DEFHEADING() 2217 2218DEFHEADING(Debug/Expert options:) 2219 2220STEXI 2221@table @option 2222ETEXI 2223 2224DEF("serial", HAS_ARG, QEMU_OPTION_serial, \ 2225 "-serial dev redirect the serial port to char device 'dev'\n", 2226 QEMU_ARCH_ALL) 2227STEXI 2228@item -serial @var{dev} 2229@findex -serial 2230Redirect the virtual serial port to host character device 2231@var{dev}. The default device is @code{vc} in graphical mode and 2232@code{stdio} in non graphical mode. 2233 2234This option can be used several times to simulate up to 4 serial 2235ports. 2236 2237Use @code{-serial none} to disable all serial ports. 2238 2239Available character devices are: 2240@table @option 2241@item vc[:@var{W}x@var{H}] 2242Virtual console. Optionally, a width and height can be given in pixel with 2243@example 2244vc:800x600 2245@end example 2246It is also possible to specify width or height in characters: 2247@example 2248vc:80Cx24C 2249@end example 2250@item pty 2251[Linux only] Pseudo TTY (a new PTY is automatically allocated) 2252@item none 2253No device is allocated. 2254@item null 2255void device 2256@item /dev/XXX 2257[Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port 2258parameters are set according to the emulated ones. 2259@item /dev/parport@var{N} 2260[Linux only, parallel port only] Use host parallel port 2261@var{N}. Currently SPP and EPP parallel port features can be used. 2262@item file:@var{filename} 2263Write output to @var{filename}. No character can be read. 2264@item stdio 2265[Unix only] standard input/output 2266@item pipe:@var{filename} 2267name pipe @var{filename} 2268@item COM@var{n} 2269[Windows only] Use host serial port @var{n} 2270@item udp:[@var{remote_host}]:@var{remote_port}[@@[@var{src_ip}]:@var{src_port}] 2271This implements UDP Net Console. 2272When @var{remote_host} or @var{src_ip} are not specified 2273they default to @code{0.0.0.0}. 2274When not using a specified @var{src_port} a random port is automatically chosen. 2275 2276If you just want a simple readonly console you can use @code{netcat} or 2277@code{nc}, by starting QEMU with: @code{-serial udp::4555} and nc as: 2278@code{nc -u -l -p 4555}. Any time QEMU writes something to that port it 2279will appear in the netconsole session. 2280 2281If you plan to send characters back via netconsole or you want to stop 2282and start QEMU a lot of times, you should have QEMU use the same 2283source port each time by using something like @code{-serial 2284udp::4555@@:4556} to QEMU. Another approach is to use a patched 2285version of netcat which can listen to a TCP port and send and receive 2286characters via udp. If you have a patched version of netcat which 2287activates telnet remote echo and single char transfer, then you can 2288use the following options to step up a netcat redirector to allow 2289telnet on port 5555 to access the QEMU port. 2290@table @code 2291@item QEMU Options: 2292-serial udp::4555@@:4556 2293@item netcat options: 2294-u -P 4555 -L 0.0.0.0:4556 -t -p 5555 -I -T 2295@item telnet options: 2296localhost 5555 2297@end table 2298 2299@item tcp:[@var{host}]:@var{port}[,@var{server}][,nowait][,nodelay] 2300The TCP Net Console has two modes of operation. It can send the serial 2301I/O to a location or wait for a connection from a location. By default 2302the TCP Net Console is sent to @var{host} at the @var{port}. If you use 2303the @var{server} option QEMU will wait for a client socket application 2304to connect to the port before continuing, unless the @code{nowait} 2305option was specified. The @code{nodelay} option disables the Nagle buffering 2306algorithm. If @var{host} is omitted, 0.0.0.0 is assumed. Only 2307one TCP connection at a time is accepted. You can use @code{telnet} to 2308connect to the corresponding character device. 2309@table @code 2310@item Example to send tcp console to 192.168.0.2 port 4444 2311-serial tcp:192.168.0.2:4444 2312@item Example to listen and wait on port 4444 for connection 2313-serial tcp::4444,server 2314@item Example to not wait and listen on ip 192.168.0.100 port 4444 2315-serial tcp:192.168.0.100:4444,server,nowait 2316@end table 2317 2318@item telnet:@var{host}:@var{port}[,server][,nowait][,nodelay] 2319The telnet protocol is used instead of raw tcp sockets. The options 2320work the same as if you had specified @code{-serial tcp}. The 2321difference is that the port acts like a telnet server or client using 2322telnet option negotiation. This will also allow you to send the 2323MAGIC_SYSRQ sequence if you use a telnet that supports sending the break 2324sequence. Typically in unix telnet you do it with Control-] and then 2325type "send break" followed by pressing the enter key. 2326 2327@item unix:@var{path}[,server][,nowait] 2328A unix domain socket is used instead of a tcp socket. The option works the 2329same as if you had specified @code{-serial tcp} except the unix domain socket 2330@var{path} is used for connections. 2331 2332@item mon:@var{dev_string} 2333This is a special option to allow the monitor to be multiplexed onto 2334another serial port. The monitor is accessed with key sequence of 2335@key{Control-a} and then pressing @key{c}. See monitor access 2336@ref{pcsys_keys} in the -nographic section for more keys. 2337@var{dev_string} should be any one of the serial devices specified 2338above. An example to multiplex the monitor onto a telnet server 2339listening on port 4444 would be: 2340@table @code 2341@item -serial mon:telnet::4444,server,nowait 2342@end table 2343 2344@item braille 2345Braille device. This will use BrlAPI to display the braille output on a real 2346or fake device. 2347 2348@item msmouse 2349Three button serial mouse. Configure the guest to use Microsoft protocol. 2350@end table 2351ETEXI 2352 2353DEF("parallel", HAS_ARG, QEMU_OPTION_parallel, \ 2354 "-parallel dev redirect the parallel port to char device 'dev'\n", 2355 QEMU_ARCH_ALL) 2356STEXI 2357@item -parallel @var{dev} 2358@findex -parallel 2359Redirect the virtual parallel port to host device @var{dev} (same 2360devices as the serial port). On Linux hosts, @file{/dev/parportN} can 2361be used to use hardware devices connected on the corresponding host 2362parallel port. 2363 2364This option can be used several times to simulate up to 3 parallel 2365ports. 2366 2367Use @code{-parallel none} to disable all parallel ports. 2368ETEXI 2369 2370DEF("monitor", HAS_ARG, QEMU_OPTION_monitor, \ 2371 "-monitor dev redirect the monitor to char device 'dev'\n", 2372 QEMU_ARCH_ALL) 2373STEXI 2374@item -monitor @var{dev} 2375@findex -monitor 2376Redirect the monitor to host device @var{dev} (same devices as the 2377serial port). 2378The default device is @code{vc} in graphical mode and @code{stdio} in 2379non graphical mode. 2380ETEXI 2381DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \ 2382 "-qmp dev like -monitor but opens in 'control' mode\n", 2383 QEMU_ARCH_ALL) 2384STEXI 2385@item -qmp @var{dev} 2386@findex -qmp 2387Like -monitor but opens in 'control' mode. 2388ETEXI 2389 2390DEF("mon", HAS_ARG, QEMU_OPTION_mon, \ 2391 "-mon chardev=[name][,mode=readline|control][,default]\n", QEMU_ARCH_ALL) 2392STEXI 2393@item -mon chardev=[name][,mode=readline|control][,default] 2394@findex -mon 2395Setup monitor on chardev @var{name}. 2396ETEXI 2397 2398DEF("debugcon", HAS_ARG, QEMU_OPTION_debugcon, \ 2399 "-debugcon dev redirect the debug console to char device 'dev'\n", 2400 QEMU_ARCH_ALL) 2401STEXI 2402@item -debugcon @var{dev} 2403@findex -debugcon 2404Redirect the debug console to host device @var{dev} (same devices as the 2405serial port). The debug console is an I/O port which is typically port 24060xe9; writing to that I/O port sends output to this device. 2407The default device is @code{vc} in graphical mode and @code{stdio} in 2408non graphical mode. 2409ETEXI 2410 2411DEF("pidfile", HAS_ARG, QEMU_OPTION_pidfile, \ 2412 "-pidfile file write PID to 'file'\n", QEMU_ARCH_ALL) 2413STEXI 2414@item -pidfile @var{file} 2415@findex -pidfile 2416Store the QEMU process PID in @var{file}. It is useful if you launch QEMU 2417from a script. 2418ETEXI 2419 2420DEF("singlestep", 0, QEMU_OPTION_singlestep, \ 2421 "-singlestep always run in singlestep mode\n", QEMU_ARCH_ALL) 2422STEXI 2423@item -singlestep 2424@findex -singlestep 2425Run the emulation in single step mode. 2426ETEXI 2427 2428DEF("S", 0, QEMU_OPTION_S, \ 2429 "-S freeze CPU at startup (use 'c' to start execution)\n", 2430 QEMU_ARCH_ALL) 2431STEXI 2432@item -S 2433@findex -S 2434Do not start CPU at startup (you must type 'c' in the monitor). 2435ETEXI 2436 2437DEF("gdb", HAS_ARG, QEMU_OPTION_gdb, \ 2438 "-gdb dev wait for gdb connection on 'dev'\n", QEMU_ARCH_ALL) 2439STEXI 2440@item -gdb @var{dev} 2441@findex -gdb 2442Wait for gdb connection on device @var{dev} (@pxref{gdb_usage}). Typical 2443connections will likely be TCP-based, but also UDP, pseudo TTY, or even 2444stdio are reasonable use case. The latter is allowing to start QEMU from 2445within gdb and establish the connection via a pipe: 2446@example 2447(gdb) target remote | exec qemu-system-i386 -gdb stdio ... 2448@end example 2449ETEXI 2450 2451DEF("s", 0, QEMU_OPTION_s, \ 2452 "-s shorthand for -gdb tcp::" DEFAULT_GDBSTUB_PORT "\n", 2453 QEMU_ARCH_ALL) 2454STEXI 2455@item -s 2456@findex -s 2457Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234 2458(@pxref{gdb_usage}). 2459ETEXI 2460 2461DEF("d", HAS_ARG, QEMU_OPTION_d, \ 2462 "-d item1,... output log to /tmp/qemu.log (use '-d help' for a list of log items)\n", 2463 QEMU_ARCH_ALL) 2464STEXI 2465@item -d 2466@findex -d 2467Output log in /tmp/qemu.log 2468ETEXI 2469 2470DEF("D", HAS_ARG, QEMU_OPTION_D, \ 2471 "-D logfile output log to logfile (instead of the default /tmp/qemu.log)\n", 2472 QEMU_ARCH_ALL) 2473STEXI 2474@item -D @var{logfile} 2475@findex -D 2476Output log in @var{logfile} instead of /tmp/qemu.log 2477ETEXI 2478 2479DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \ 2480 "-hdachs c,h,s[,t]\n" \ 2481 " force hard disk 0 physical geometry and the optional BIOS\n" \ 2482 " translation (t=none or lba) (usually QEMU can guess them)\n", 2483 QEMU_ARCH_ALL) 2484STEXI 2485@item -hdachs @var{c},@var{h},@var{s},[,@var{t}] 2486@findex -hdachs 2487Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <= 2488@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS 2489translation mode (@var{t}=none, lba or auto). Usually QEMU can guess 2490all those parameters. This option is useful for old MS-DOS disk 2491images. 2492ETEXI 2493 2494DEF("L", HAS_ARG, QEMU_OPTION_L, \ 2495 "-L path set the directory for the BIOS, VGA BIOS and keymaps\n", 2496 QEMU_ARCH_ALL) 2497STEXI 2498@item -L @var{path} 2499@findex -L 2500Set the directory for the BIOS, VGA BIOS and keymaps. 2501ETEXI 2502 2503DEF("bios", HAS_ARG, QEMU_OPTION_bios, \ 2504 "-bios file set the filename for the BIOS\n", QEMU_ARCH_ALL) 2505STEXI 2506@item -bios @var{file} 2507@findex -bios 2508Set the filename for the BIOS. 2509ETEXI 2510 2511DEF("enable-kvm", 0, QEMU_OPTION_enable_kvm, \ 2512 "-enable-kvm enable KVM full virtualization support\n", QEMU_ARCH_ALL) 2513STEXI 2514@item -enable-kvm 2515@findex -enable-kvm 2516Enable KVM full virtualization support. This option is only available 2517if KVM support is enabled when compiling. 2518ETEXI 2519 2520DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid, 2521 "-xen-domid id specify xen guest domain id\n", QEMU_ARCH_ALL) 2522DEF("xen-create", 0, QEMU_OPTION_xen_create, 2523 "-xen-create create domain using xen hypercalls, bypassing xend\n" 2524 " warning: should not be used when xend is in use\n", 2525 QEMU_ARCH_ALL) 2526DEF("xen-attach", 0, QEMU_OPTION_xen_attach, 2527 "-xen-attach attach to existing xen domain\n" 2528 " xend will use this when starting QEMU\n", 2529 QEMU_ARCH_ALL) 2530STEXI 2531@item -xen-domid @var{id} 2532@findex -xen-domid 2533Specify xen guest domain @var{id} (XEN only). 2534@item -xen-create 2535@findex -xen-create 2536Create domain using xen hypercalls, bypassing xend. 2537Warning: should not be used when xend is in use (XEN only). 2538@item -xen-attach 2539@findex -xen-attach 2540Attach to existing xen domain. 2541xend will use this when starting QEMU (XEN only). 2542ETEXI 2543 2544DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \ 2545 "-no-reboot exit instead of rebooting\n", QEMU_ARCH_ALL) 2546STEXI 2547@item -no-reboot 2548@findex -no-reboot 2549Exit instead of rebooting. 2550ETEXI 2551 2552DEF("no-shutdown", 0, QEMU_OPTION_no_shutdown, \ 2553 "-no-shutdown stop before shutdown\n", QEMU_ARCH_ALL) 2554STEXI 2555@item -no-shutdown 2556@findex -no-shutdown 2557Don't exit QEMU on guest shutdown, but instead only stop the emulation. 2558This allows for instance switching to monitor to commit changes to the 2559disk image. 2560ETEXI 2561 2562DEF("loadvm", HAS_ARG, QEMU_OPTION_loadvm, \ 2563 "-loadvm [tag|id]\n" \ 2564 " start right away with a saved state (loadvm in monitor)\n", 2565 QEMU_ARCH_ALL) 2566STEXI 2567@item -loadvm @var{file} 2568@findex -loadvm 2569Start right away with a saved state (@code{loadvm} in monitor) 2570ETEXI 2571 2572#ifndef _WIN32 2573DEF("daemonize", 0, QEMU_OPTION_daemonize, \ 2574 "-daemonize daemonize QEMU after initializing\n", QEMU_ARCH_ALL) 2575#endif 2576STEXI 2577@item -daemonize 2578@findex -daemonize 2579Daemonize the QEMU process after initialization. QEMU will not detach from 2580standard IO until it is ready to receive connections on any of its devices. 2581This option is a useful way for external programs to launch QEMU without having 2582to cope with initialization race conditions. 2583ETEXI 2584 2585DEF("option-rom", HAS_ARG, QEMU_OPTION_option_rom, \ 2586 "-option-rom rom load a file, rom, into the option ROM space\n", 2587 QEMU_ARCH_ALL) 2588STEXI 2589@item -option-rom @var{file} 2590@findex -option-rom 2591Load the contents of @var{file} as an option ROM. 2592This option is useful to load things like EtherBoot. 2593ETEXI 2594 2595DEF("clock", HAS_ARG, QEMU_OPTION_clock, \ 2596 "-clock force the use of the given methods for timer alarm.\n" \ 2597 " To see what timers are available use '-clock help'\n", 2598 QEMU_ARCH_ALL) 2599STEXI 2600@item -clock @var{method} 2601@findex -clock 2602Force the use of the given methods for timer alarm. To see what timers 2603are available use @code{-clock help}. 2604ETEXI 2605 2606HXCOMM Options deprecated by -rtc 2607DEF("localtime", 0, QEMU_OPTION_localtime, "", QEMU_ARCH_ALL) 2608DEF("startdate", HAS_ARG, QEMU_OPTION_startdate, "", QEMU_ARCH_ALL) 2609 2610DEF("rtc", HAS_ARG, QEMU_OPTION_rtc, \ 2611 "-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]\n" \ 2612 " set the RTC base and clock, enable drift fix for clock ticks (x86 only)\n", 2613 QEMU_ARCH_ALL) 2614 2615STEXI 2616 2617@item -rtc [base=utc|localtime|@var{date}][,clock=host|vm][,driftfix=none|slew] 2618@findex -rtc 2619Specify @option{base} as @code{utc} or @code{localtime} to let the RTC start at the current 2620UTC or local time, respectively. @code{localtime} is required for correct date in 2621MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the 2622format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC. 2623 2624By default the RTC is driven by the host system time. This allows to use the 2625RTC as accurate reference clock inside the guest, specifically if the host 2626time is smoothly following an accurate external reference clock, e.g. via NTP. 2627If you want to isolate the guest time from the host, you can set @option{clock} 2628to @code{rt} instead. To even prevent it from progressing during suspension, 2629you can set it to @code{vm}. 2630 2631Enable @option{driftfix} (i386 targets only) if you experience time drift problems, 2632specifically with Windows' ACPI HAL. This option will try to figure out how 2633many timer interrupts were not processed by the Windows guest and will 2634re-inject them. 2635ETEXI 2636 2637DEF("icount", HAS_ARG, QEMU_OPTION_icount, \ 2638 "-icount [N|auto]\n" \ 2639 " enable virtual instruction counter with 2^N clock ticks per\n" \ 2640 " instruction\n", QEMU_ARCH_ALL) 2641STEXI 2642@item -icount [@var{N}|auto] 2643@findex -icount 2644Enable virtual instruction counter. The virtual cpu will execute one 2645instruction every 2^@var{N} ns of virtual time. If @code{auto} is specified 2646then the virtual cpu speed will be automatically adjusted to keep virtual 2647time within a few seconds of real time. 2648 2649Note that while this option can give deterministic behavior, it does not 2650provide cycle accurate emulation. Modern CPUs contain superscalar out of 2651order cores with complex cache hierarchies. The number of instructions 2652executed often has little or no correlation with actual performance. 2653ETEXI 2654 2655DEF("watchdog", HAS_ARG, QEMU_OPTION_watchdog, \ 2656 "-watchdog i6300esb|ib700\n" \ 2657 " enable virtual hardware watchdog [default=none]\n", 2658 QEMU_ARCH_ALL) 2659STEXI 2660@item -watchdog @var{model} 2661@findex -watchdog 2662Create a virtual hardware watchdog device. Once enabled (by a guest 2663action), the watchdog must be periodically polled by an agent inside 2664the guest or else the guest will be restarted. 2665 2666The @var{model} is the model of hardware watchdog to emulate. Choices 2667for model are: @code{ib700} (iBASE 700) which is a very simple ISA 2668watchdog with a single timer, or @code{i6300esb} (Intel 6300ESB I/O 2669controller hub) which is a much more featureful PCI-based dual-timer 2670watchdog. Choose a model for which your guest has drivers. 2671 2672Use @code{-watchdog help} to list available hardware models. Only one 2673watchdog can be enabled for a guest. 2674ETEXI 2675 2676DEF("watchdog-action", HAS_ARG, QEMU_OPTION_watchdog_action, \ 2677 "-watchdog-action reset|shutdown|poweroff|pause|debug|none\n" \ 2678 " action when watchdog fires [default=reset]\n", 2679 QEMU_ARCH_ALL) 2680STEXI 2681@item -watchdog-action @var{action} 2682 2683The @var{action} controls what QEMU will do when the watchdog timer 2684expires. 2685The default is 2686@code{reset} (forcefully reset the guest). 2687Other possible actions are: 2688@code{shutdown} (attempt to gracefully shutdown the guest), 2689@code{poweroff} (forcefully poweroff the guest), 2690@code{pause} (pause the guest), 2691@code{debug} (print a debug message and continue), or 2692@code{none} (do nothing). 2693 2694Note that the @code{shutdown} action requires that the guest responds 2695to ACPI signals, which it may not be able to do in the sort of 2696situations where the watchdog would have expired, and thus 2697@code{-watchdog-action shutdown} is not recommended for production use. 2698 2699Examples: 2700 2701@table @code 2702@item -watchdog i6300esb -watchdog-action pause 2703@item -watchdog ib700 2704@end table 2705ETEXI 2706 2707DEF("echr", HAS_ARG, QEMU_OPTION_echr, \ 2708 "-echr chr set terminal escape character instead of ctrl-a\n", 2709 QEMU_ARCH_ALL) 2710STEXI 2711 2712@item -echr @var{numeric_ascii_value} 2713@findex -echr 2714Change the escape character used for switching to the monitor when using 2715monitor and serial sharing. The default is @code{0x01} when using the 2716@code{-nographic} option. @code{0x01} is equal to pressing 2717@code{Control-a}. You can select a different character from the ascii 2718control keys where 1 through 26 map to Control-a through Control-z. For 2719instance you could use the either of the following to change the escape 2720character to Control-t. 2721@table @code 2722@item -echr 0x14 2723@item -echr 20 2724@end table 2725ETEXI 2726 2727DEF("virtioconsole", HAS_ARG, QEMU_OPTION_virtiocon, \ 2728 "-virtioconsole c\n" \ 2729 " set virtio console\n", QEMU_ARCH_ALL) 2730STEXI 2731@item -virtioconsole @var{c} 2732@findex -virtioconsole 2733Set virtio console. 2734 2735This option is maintained for backward compatibility. 2736 2737Please use @code{-device virtconsole} for the new way of invocation. 2738ETEXI 2739 2740DEF("show-cursor", 0, QEMU_OPTION_show_cursor, \ 2741 "-show-cursor show cursor\n", QEMU_ARCH_ALL) 2742STEXI 2743@item -show-cursor 2744@findex -show-cursor 2745Show cursor. 2746ETEXI 2747 2748DEF("tb-size", HAS_ARG, QEMU_OPTION_tb_size, \ 2749 "-tb-size n set TB size\n", QEMU_ARCH_ALL) 2750STEXI 2751@item -tb-size @var{n} 2752@findex -tb-size 2753Set TB size. 2754ETEXI 2755 2756DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \ 2757 "-incoming p prepare for incoming migration, listen on port p\n", 2758 QEMU_ARCH_ALL) 2759STEXI 2760@item -incoming @var{port} 2761@findex -incoming 2762Prepare for incoming migration, listen on @var{port}. 2763ETEXI 2764 2765DEF("nodefaults", 0, QEMU_OPTION_nodefaults, \ 2766 "-nodefaults don't create default devices\n", QEMU_ARCH_ALL) 2767STEXI 2768@item -nodefaults 2769@findex -nodefaults 2770Don't create default devices. Normally, QEMU sets the default devices like serial 2771port, parallel port, virtual console, monitor device, VGA adapter, floppy and 2772CD-ROM drive and others. The @code{-nodefaults} option will disable all those 2773default devices. 2774ETEXI 2775 2776#ifndef _WIN32 2777DEF("chroot", HAS_ARG, QEMU_OPTION_chroot, \ 2778 "-chroot dir chroot to dir just before starting the VM\n", 2779 QEMU_ARCH_ALL) 2780#endif 2781STEXI 2782@item -chroot @var{dir} 2783@findex -chroot 2784Immediately before starting guest execution, chroot to the specified 2785directory. Especially useful in combination with -runas. 2786ETEXI 2787 2788#ifndef _WIN32 2789DEF("runas", HAS_ARG, QEMU_OPTION_runas, \ 2790 "-runas user change to user id user just before starting the VM\n", 2791 QEMU_ARCH_ALL) 2792#endif 2793STEXI 2794@item -runas @var{user} 2795@findex -runas 2796Immediately before starting guest execution, drop root privileges, switching 2797to the specified user. 2798ETEXI 2799 2800DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env, 2801 "-prom-env variable=value\n" 2802 " set OpenBIOS nvram variables\n", 2803 QEMU_ARCH_PPC | QEMU_ARCH_SPARC) 2804STEXI 2805@item -prom-env @var{variable}=@var{value} 2806@findex -prom-env 2807Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only). 2808ETEXI 2809DEF("semihosting", 0, QEMU_OPTION_semihosting, 2810 "-semihosting semihosting mode\n", QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA) 2811STEXI 2812@item -semihosting 2813@findex -semihosting 2814Semihosting mode (ARM, M68K, Xtensa only). 2815ETEXI 2816DEF("old-param", 0, QEMU_OPTION_old_param, 2817 "-old-param old param mode\n", QEMU_ARCH_ARM) 2818STEXI 2819@item -old-param 2820@findex -old-param (ARM) 2821Old param mode (ARM only). 2822ETEXI 2823 2824DEF("sandbox", HAS_ARG, QEMU_OPTION_sandbox, \ 2825 "-sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').\n", 2826 QEMU_ARCH_ALL) 2827STEXI 2828@item -sandbox 2829@findex -sandbox 2830Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off' will 2831disable it. The default is 'off'. 2832ETEXI 2833 2834DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig, 2835 "-readconfig <file>\n", QEMU_ARCH_ALL) 2836STEXI 2837@item -readconfig @var{file} 2838@findex -readconfig 2839Read device configuration from @var{file}. This approach is useful when you want to spawn 2840QEMU process with many command line options but you don't want to exceed the command line 2841character limit. 2842ETEXI 2843DEF("writeconfig", HAS_ARG, QEMU_OPTION_writeconfig, 2844 "-writeconfig <file>\n" 2845 " read/write config file\n", QEMU_ARCH_ALL) 2846STEXI 2847@item -writeconfig @var{file} 2848@findex -writeconfig 2849Write device configuration to @var{file}. The @var{file} can be either filename to save 2850command line and device configuration into file or dash @code{-}) character to print the 2851output to stdout. This can be later used as input file for @code{-readconfig} option. 2852ETEXI 2853DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig, 2854 "-nodefconfig\n" 2855 " do not load default config files at startup\n", 2856 QEMU_ARCH_ALL) 2857STEXI 2858@item -nodefconfig 2859@findex -nodefconfig 2860Normally QEMU loads configuration files from @var{sysconfdir} and @var{datadir} at startup. 2861The @code{-nodefconfig} option will prevent QEMU from loading any of those config files. 2862ETEXI 2863DEF("no-user-config", 0, QEMU_OPTION_nouserconfig, 2864 "-no-user-config\n" 2865 " do not load user-provided config files at startup\n", 2866 QEMU_ARCH_ALL) 2867STEXI 2868@item -no-user-config 2869@findex -no-user-config 2870The @code{-no-user-config} option makes QEMU not load any of the user-provided 2871config files on @var{sysconfdir}, but won't make it skip the QEMU-provided config 2872files from @var{datadir}. 2873ETEXI 2874DEF("trace", HAS_ARG, QEMU_OPTION_trace, 2875 "-trace [events=<file>][,file=<file>]\n" 2876 " specify tracing options\n", 2877 QEMU_ARCH_ALL) 2878STEXI 2879HXCOMM This line is not accurate, as some sub-options are backend-specific but 2880HXCOMM HX does not support conditional compilation of text. 2881@item -trace [events=@var{file}][,file=@var{file}] 2882@findex -trace 2883 2884Specify tracing options. 2885 2886@table @option 2887@item events=@var{file} 2888Immediately enable events listed in @var{file}. 2889The file must contain one event name (as listed in the @var{trace-events} file) 2890per line. 2891This option is only available if QEMU has been compiled with 2892either @var{simple} or @var{stderr} tracing backend. 2893@item file=@var{file} 2894Log output traces to @var{file}. 2895 2896This option is only available if QEMU has been compiled with 2897the @var{simple} tracing backend. 2898@end table 2899ETEXI 2900 2901DEF("qtest", HAS_ARG, QEMU_OPTION_qtest, 2902 "-qtest CHR specify tracing options\n", 2903 QEMU_ARCH_ALL) 2904 2905DEF("qtest-log", HAS_ARG, QEMU_OPTION_qtest_log, 2906 "-qtest-log LOG specify tracing options\n", 2907 QEMU_ARCH_ALL) 2908 2909#ifdef __linux__ 2910DEF("enable-fips", 0, QEMU_OPTION_enablefips, 2911 "-enable-fips enable FIPS 140-2 compliance\n", 2912 QEMU_ARCH_ALL) 2913#endif 2914STEXI 2915@item -enable-fips 2916@findex -enable-fips 2917Enable FIPS 140-2 compliance mode. 2918ETEXI 2919 2920HXCOMM Deprecated by -machine accel=tcg property 2921DEF("no-kvm", 0, QEMU_OPTION_no_kvm, "", QEMU_ARCH_I386) 2922 2923HXCOMM Deprecated by kvm-pit driver properties 2924DEF("no-kvm-pit-reinjection", 0, QEMU_OPTION_no_kvm_pit_reinjection, 2925 "", QEMU_ARCH_I386) 2926 2927HXCOMM Deprecated (ignored) 2928DEF("no-kvm-pit", 0, QEMU_OPTION_no_kvm_pit, "", QEMU_ARCH_I386) 2929 2930HXCOMM Deprecated by -machine kernel_irqchip=on|off property 2931DEF("no-kvm-irqchip", 0, QEMU_OPTION_no_kvm_irqchip, "", QEMU_ARCH_I386) 2932 2933HXCOMM Deprecated (ignored) 2934DEF("tdf", 0, QEMU_OPTION_tdf,"", QEMU_ARCH_ALL) 2935 2936DEF("object", HAS_ARG, QEMU_OPTION_object, 2937 "-object TYPENAME[,PROP1=VALUE1,...]\n" 2938 " create an new object of type TYPENAME setting properties\n" 2939 " in the order they are specified. Note that the 'id'\n" 2940 " property must be set. These objects are placed in the\n" 2941 " '/objects' path.\n", 2942 QEMU_ARCH_ALL) 2943 2944HXCOMM This is the last statement. Insert new options before this line! 2945STEXI 2946@end table 2947ETEXI 2948
