1HXCOMM Use DEFHEADING() to define headings in both help text and texi 2HXCOMM Text between STEXI and ETEXI are copied to texi version and 3HXCOMM discarded from C version 4HXCOMM DEF(option, HAS_ARG/0, opt_enum, opt_help, arch_mask) is used to 5HXCOMM construct option structures, enums and help message for specified 6HXCOMM architectures. 7HXCOMM HXCOMM can be used for comments, discarded from both texi and C 8 9DEFHEADING(Standard options:) 10STEXI 11@table @option 12ETEXI 13 14DEF("help", 0, QEMU_OPTION_h, 15 "-h or -help display this help and exit\n", QEMU_ARCH_ALL) 16STEXI 17@item -h 18@findex -h 19Display help and exit 20ETEXI 21 22DEF("version", 0, QEMU_OPTION_version, 23 "-version display version information and exit\n", QEMU_ARCH_ALL) 24STEXI 25@item -version 26@findex -version 27Display version information and exit 28ETEXI 29 30DEF("machine", HAS_ARG, QEMU_OPTION_machine, \ 31 "-machine [type=]name[,prop[=value][,...]]\n" 32 " selects emulated machine ('-machine help' for list)\n" 33 " property accel=accel1[:accel2[:...]] selects accelerator\n" 34 " supported accelerators are kvm, xen, tcg (default: tcg)\n" 35 " kernel_irqchip=on|off controls accelerated irqchip support\n" 36 " kvm_shadow_mem=size of KVM shadow MMU\n" 37 " dump-guest-core=on|off include guest memory in a core dump (default=on)\n" 38 " mem-merge=on|off controls memory merge support (default: on)\n", 39 QEMU_ARCH_ALL) 40STEXI 41@item -machine [type=]@var{name}[,prop=@var{value}[,...]] 42@findex -machine 43Select the emulated machine by @var{name}. Use @code{-machine help} to list 44available machines. Supported machine properties are: 45@table @option 46@item accel=@var{accels1}[:@var{accels2}[:...]] 47This is used to enable an accelerator. Depending on the target architecture, 48kvm, xen, or tcg can be available. By default, tcg is used. If there is more 49than one accelerator specified, the next one is used if the previous one fails 50to initialize. 51@item kernel_irqchip=on|off 52Enables in-kernel irqchip support for the chosen accelerator when available. 53@item kvm_shadow_mem=size 54Defines the size of the KVM shadow MMU. 55@item dump-guest-core=on|off 56Include guest memory in a core dump. The default is on. 57@item mem-merge=on|off 58Enables or disables memory merge support. This feature, when supported by 59the host, de-duplicates identical memory pages among VMs instances 60(enabled by default). 61@end table 62ETEXI 63 64HXCOMM Deprecated by -machine 65DEF("M", HAS_ARG, QEMU_OPTION_M, "", QEMU_ARCH_ALL) 66 67DEF("cpu", HAS_ARG, QEMU_OPTION_cpu, 68 "-cpu cpu select CPU ('-cpu help' for list)\n", QEMU_ARCH_ALL) 69STEXI 70@item -cpu @var{model} 71@findex -cpu 72Select CPU model (@code{-cpu help} for list and additional feature selection) 73ETEXI 74 75DEF("smp", HAS_ARG, QEMU_OPTION_smp, 76 "-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n" 77 " set the number of CPUs to 'n' [default=1]\n" 78 " maxcpus= maximum number of total cpus, including\n" 79 " offline CPUs for hotplug, etc\n" 80 " cores= number of CPU cores on one socket\n" 81 " threads= number of threads on one CPU core\n" 82 " sockets= number of discrete sockets in the system\n", 83 QEMU_ARCH_ALL) 84STEXI 85@item -smp @var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}] 86@findex -smp 87Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255 88CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs 89to 4. 90For the PC target, the number of @var{cores} per socket, the number 91of @var{threads} per cores and the total number of @var{sockets} can be 92specified. Missing values will be computed. If any on the three values is 93given, the total number of CPUs @var{n} can be omitted. @var{maxcpus} 94specifies the maximum number of hotpluggable CPUs. 95ETEXI 96 97DEF("numa", HAS_ARG, QEMU_OPTION_numa, 98 "-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node]\n", QEMU_ARCH_ALL) 99STEXI 100@item -numa @var{opts} 101@findex -numa 102Simulate a multi node NUMA system. If mem and cpus are omitted, resources 103are split equally. 104ETEXI 105 106DEF("fda", HAS_ARG, QEMU_OPTION_fda, 107 "-fda/-fdb file use 'file' as floppy disk 0/1 image\n", QEMU_ARCH_ALL) 108DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL) 109STEXI 110@item -fda @var{file} 111@item -fdb @var{file} 112@findex -fda 113@findex -fdb 114Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can 115use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}). 116ETEXI 117 118DEF("hda", HAS_ARG, QEMU_OPTION_hda, 119 "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL) 120DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL) 121DEF("hdc", HAS_ARG, QEMU_OPTION_hdc, 122 "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL) 123DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL) 124STEXI 125@item -hda @var{file} 126@item -hdb @var{file} 127@item -hdc @var{file} 128@item -hdd @var{file} 129@findex -hda 130@findex -hdb 131@findex -hdc 132@findex -hdd 133Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}). 134ETEXI 135 136DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom, 137 "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n", 138 QEMU_ARCH_ALL) 139STEXI 140@item -cdrom @var{file} 141@findex -cdrom 142Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and 143@option{-cdrom} at the same time). You can use the host CD-ROM by 144using @file{/dev/cdrom} as filename (@pxref{host_drives}). 145ETEXI 146 147DEF("drive", HAS_ARG, QEMU_OPTION_drive, 148 "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n" 149 " [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n" 150 " [,cache=writethrough|writeback|none|directsync|unsafe][,format=f]\n" 151 " [,serial=s][,addr=A][,id=name][,aio=threads|native]\n" 152 " [,readonly=on|off][,copy-on-read=on|off]\n" 153 " [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]]\n" 154 " use 'file' as a drive image\n", QEMU_ARCH_ALL) 155STEXI 156@item -drive @var{option}[,@var{option}[,@var{option}[,...]]] 157@findex -drive 158 159Define a new drive. Valid options are: 160 161@table @option 162@item file=@var{file} 163This option defines which disk image (@pxref{disk_images}) to use with 164this drive. If the filename contains comma, you must double it 165(for instance, "file=my,,file" to use file "my,file"). 166 167Special files such as iSCSI devices can be specified using protocol 168specific URLs. See the section for "Device URL Syntax" for more information. 169@item if=@var{interface} 170This option defines on which type on interface the drive is connected. 171Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio. 172@item bus=@var{bus},unit=@var{unit} 173These options define where is connected the drive by defining the bus number and 174the unit id. 175@item index=@var{index} 176This option defines where is connected the drive by using an index in the list 177of available connectors of a given interface type. 178@item media=@var{media} 179This option defines the type of the media: disk or cdrom. 180@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}] 181These options have the same definition as they have in @option{-hdachs}. 182@item snapshot=@var{snapshot} 183@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}). 184@item cache=@var{cache} 185@var{cache} is "none", "writeback", "unsafe", "directsync" or "writethrough" and controls how the host cache is used to access block data. 186@item aio=@var{aio} 187@var{aio} is "threads", or "native" and selects between pthread based disk I/O and native Linux AIO. 188@item format=@var{format} 189Specify which disk @var{format} will be used rather than detecting 190the format. Can be used to specifiy format=raw to avoid interpreting 191an untrusted format header. 192@item serial=@var{serial} 193This option specifies the serial number to assign to the device. 194@item addr=@var{addr} 195Specify the controller's PCI address (if=virtio only). 196@item werror=@var{action},rerror=@var{action} 197Specify which @var{action} to take on write and read errors. Valid actions are: 198"ignore" (ignore the error and try to continue), "stop" (pause QEMU), 199"report" (report the error to the guest), "enospc" (pause QEMU only if the 200host disk is full; report the error to the guest otherwise). 201The default setting is @option{werror=enospc} and @option{rerror=report}. 202@item readonly 203Open drive @option{file} as read-only. Guest write attempts will fail. 204@item copy-on-read=@var{copy-on-read} 205@var{copy-on-read} is "on" or "off" and enables whether to copy read backing 206file sectors into the image file. 207@end table 208 209By default, the @option{cache=writeback} mode is used. It will report data 210writes as completed as soon as the data is present in the host page cache. 211This is safe as long as your guest OS makes sure to correctly flush disk caches 212where needed. If your guest OS does not handle volatile disk write caches 213correctly and your host crashes or loses power, then the guest may experience 214data corruption. 215 216For such guests, you should consider using @option{cache=writethrough}. This 217means that the host page cache will be used to read and write data, but write 218notification will be sent to the guest only after QEMU has made sure to flush 219each write to the disk. Be aware that this has a major impact on performance. 220 221The host page cache can be avoided entirely with @option{cache=none}. This will 222attempt to do disk IO directly to the guest's memory. QEMU may still perform 223an internal copy of the data. Note that this is considered a writeback mode and 224the guest OS must handle the disk write cache correctly in order to avoid data 225corruption on host crashes. 226 227The host page cache can be avoided while only sending write notifications to 228the guest when the data has been flushed to the disk using 229@option{cache=directsync}. 230 231In case you don't care about data integrity over host failures, use 232@option{cache=unsafe}. This option tells QEMU that it never needs to write any 233data to the disk but can instead keep things in cache. If anything goes wrong, 234like your host losing power, the disk storage getting disconnected accidentally, 235etc. your image will most probably be rendered unusable. When using 236the @option{-snapshot} option, unsafe caching is always used. 237 238Copy-on-read avoids accessing the same backing file sectors repeatedly and is 239useful when the backing file is over a slow network. By default copy-on-read 240is off. 241 242Instead of @option{-cdrom} you can use: 243@example 244qemu-system-i386 -drive file=file,index=2,media=cdrom 245@end example 246 247Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can 248use: 249@example 250qemu-system-i386 -drive file=file,index=0,media=disk 251qemu-system-i386 -drive file=file,index=1,media=disk 252qemu-system-i386 -drive file=file,index=2,media=disk 253qemu-system-i386 -drive file=file,index=3,media=disk 254@end example 255 256You can open an image using pre-opened file descriptors from an fd set: 257@example 258qemu-system-i386 259-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" 260-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" 261-drive file=/dev/fdset/2,index=0,media=disk 262@end example 263 264You can connect a CDROM to the slave of ide0: 265@example 266qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom 267@end example 268 269If you don't specify the "file=" argument, you define an empty drive: 270@example 271qemu-system-i386 -drive if=ide,index=1,media=cdrom 272@end example 273 274You can connect a SCSI disk with unit ID 6 on the bus #0: 275@example 276qemu-system-i386 -drive file=file,if=scsi,bus=0,unit=6 277@end example 278 279Instead of @option{-fda}, @option{-fdb}, you can use: 280@example 281qemu-system-i386 -drive file=file,index=0,if=floppy 282qemu-system-i386 -drive file=file,index=1,if=floppy 283@end example 284 285By default, @var{interface} is "ide" and @var{index} is automatically 286incremented: 287@example 288qemu-system-i386 -drive file=a -drive file=b" 289@end example 290is interpreted like: 291@example 292qemu-system-i386 -hda a -hdb b 293@end example 294ETEXI 295 296DEF("add-fd", HAS_ARG, QEMU_OPTION_add_fd, 297 "-add-fd fd=fd,set=set[,opaque=opaque]\n" 298 " Add 'fd' to fd 'set'\n", QEMU_ARCH_ALL) 299STEXI 300@item -add-fd fd=@var{fd},set=@var{set}[,opaque=@var{opaque}] 301@findex -add-fd 302 303Add a file descriptor to an fd set. Valid options are: 304 305@table @option 306@item fd=@var{fd} 307This option defines the file descriptor of which a duplicate is added to fd set. 308The file descriptor cannot be stdin, stdout, or stderr. 309@item set=@var{set} 310This option defines the ID of the fd set to add the file descriptor to. 311@item opaque=@var{opaque} 312This option defines a free-form string that can be used to describe @var{fd}. 313@end table 314 315You can open an image using pre-opened file descriptors from an fd set: 316@example 317qemu-system-i386 318-add-fd fd=3,set=2,opaque="rdwr:/path/to/file" 319-add-fd fd=4,set=2,opaque="rdonly:/path/to/file" 320-drive file=/dev/fdset/2,index=0,media=disk 321@end example 322ETEXI 323 324DEF("set", HAS_ARG, QEMU_OPTION_set, 325 "-set group.id.arg=value\n" 326 " set <arg> parameter for item <id> of type <group>\n" 327 " i.e. -set drive.$id.file=/path/to/image\n", QEMU_ARCH_ALL) 328STEXI 329@item -set 330@findex -set 331TODO 332ETEXI 333 334DEF("global", HAS_ARG, QEMU_OPTION_global, 335 "-global driver.prop=value\n" 336 " set a global default for a driver property\n", 337 QEMU_ARCH_ALL) 338STEXI 339@item -global @var{driver}.@var{prop}=@var{value} 340@findex -global 341Set default value of @var{driver}'s property @var{prop} to @var{value}, e.g.: 342 343@example 344qemu-system-i386 -global ide-drive.physical_block_size=4096 -drive file=file,if=ide,index=0,media=disk 345@end example 346 347In particular, you can use this to set driver properties for devices which are 348created automatically by the machine model. To create a device which is not 349created automatically and set properties on it, use -@option{device}. 350ETEXI 351 352DEF("mtdblock", HAS_ARG, QEMU_OPTION_mtdblock, 353 "-mtdblock file use 'file' as on-board Flash memory image\n", 354 QEMU_ARCH_ALL) 355STEXI 356@item -mtdblock @var{file} 357@findex -mtdblock 358Use @var{file} as on-board Flash memory image. 359ETEXI 360 361DEF("sd", HAS_ARG, QEMU_OPTION_sd, 362 "-sd file use 'file' as SecureDigital card image\n", QEMU_ARCH_ALL) 363STEXI 364@item -sd @var{file} 365@findex -sd 366Use @var{file} as SecureDigital card image. 367ETEXI 368 369DEF("pflash", HAS_ARG, QEMU_OPTION_pflash, 370 "-pflash file use 'file' as a parallel flash image\n", QEMU_ARCH_ALL) 371STEXI 372@item -pflash @var{file} 373@findex -pflash 374Use @var{file} as a parallel flash image. 375ETEXI 376 377DEF("boot", HAS_ARG, QEMU_OPTION_boot, 378 "-boot [order=drives][,once=drives][,menu=on|off]\n" 379 " [,splash=sp_name][,splash-time=sp_time][,reboot-timeout=rb_time]\n" 380 " 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n)\n" 381 " 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on\n" 382 " 'sp_time': the period that splash picture last if menu=on, unit is ms\n" 383 " 'rb_timeout': the timeout before guest reboot when boot failed, unit is ms\n", 384 QEMU_ARCH_ALL) 385STEXI 386@item -boot [order=@var{drives}][,once=@var{drives}][,menu=on|off][,splash=@var{sp_name}][,splash-time=@var{sp_time}][,reboot-timeout=@var{rb_timeout}] 387@findex -boot 388Specify boot order @var{drives} as a string of drive letters. Valid 389drive letters depend on the target achitecture. The x86 PC uses: a, b 390(floppy 1 and 2), c (first hard disk), d (first CD-ROM), n-p (Etherboot 391from network adapter 1-4), hard disk boot is the default. To apply a 392particular boot order only on the first startup, specify it via 393@option{once}. 394 395Interactive boot menus/prompts can be enabled via @option{menu=on} as far 396as firmware/BIOS supports them. The default is non-interactive boot. 397 398A splash picture could be passed to bios, enabling user to show it as logo, 399when option splash=@var{sp_name} is given and menu=on, If firmware/BIOS 400supports them. Currently Seabios for X86 system support it. 401limitation: The splash file could be a jpeg file or a BMP file in 24 BPP 402format(true color). The resolution should be supported by the SVGA mode, so 403the recommended is 320x240, 640x480, 800x640. 404 405A timeout could be passed to bios, guest will pause for @var{rb_timeout} ms 406when boot failed, then reboot. If @var{rb_timeout} is '-1', guest will not 407reboot, qemu passes '-1' to bios by default. Currently Seabios for X86 408system support it. 409 410@example 411# try to boot from network first, then from hard disk 412qemu-system-i386 -boot order=nc 413# boot from CD-ROM first, switch back to default order after reboot 414qemu-system-i386 -boot once=d 415# boot with a splash picture for 5 seconds. 416qemu-system-i386 -boot menu=on,splash=/root/boot.bmp,splash-time=5000 417@end example 418 419Note: The legacy format '-boot @var{drives}' is still supported but its 420use is discouraged as it may be removed from future versions. 421ETEXI 422 423DEF("snapshot", 0, QEMU_OPTION_snapshot, 424 "-snapshot write to temporary files instead of disk image files\n", 425 QEMU_ARCH_ALL) 426STEXI 427@item -snapshot 428@findex -snapshot 429Write to temporary files instead of disk image files. In this case, 430the raw disk image you use is not written back. You can however force 431the write back by pressing @key{C-a s} (@pxref{disk_images}). 432ETEXI 433 434DEF("m", HAS_ARG, QEMU_OPTION_m, 435 "-m megs set virtual RAM size to megs MB [default=" 436 stringify(DEFAULT_RAM_SIZE) "]\n", QEMU_ARCH_ALL) 437STEXI 438@item -m @var{megs} 439@findex -m 440Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB. Optionally, 441a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or 442gigabytes respectively. 443ETEXI 444 445DEF("mem-path", HAS_ARG, QEMU_OPTION_mempath, 446 "-mem-path FILE provide backing storage for guest RAM\n", QEMU_ARCH_ALL) 447STEXI 448@item -mem-path @var{path} 449Allocate guest RAM from a temporarily created file in @var{path}. 450ETEXI 451 452#ifdef MAP_POPULATE 453DEF("mem-prealloc", 0, QEMU_OPTION_mem_prealloc, 454 "-mem-prealloc preallocate guest memory (use with -mem-path)\n", 455 QEMU_ARCH_ALL) 456STEXI 457@item -mem-prealloc 458Preallocate memory when using -mem-path. 459ETEXI 460#endif 461 462DEF("k", HAS_ARG, QEMU_OPTION_k, 463 "-k language use keyboard layout (for example 'fr' for French)\n", 464 QEMU_ARCH_ALL) 465STEXI 466@item -k @var{language} 467@findex -k 468Use keyboard layout @var{language} (for example @code{fr} for 469French). This option is only needed where it is not easy to get raw PC 470keycodes (e.g. on Macs, with some X11 servers or with a VNC 471display). You don't normally need to use it on PC/Linux or PC/Windows 472hosts. 473 474The available layouts are: 475@example 476ar de-ch es fo fr-ca hu ja mk no pt-br sv 477da en-gb et fr fr-ch is lt nl pl ru th 478de en-us fi fr-be hr it lv nl-be pt sl tr 479@end example 480 481The default is @code{en-us}. 482ETEXI 483 484 485DEF("audio-help", 0, QEMU_OPTION_audio_help, 486 "-audio-help print list of audio drivers and their options\n", 487 QEMU_ARCH_ALL) 488STEXI 489@item -audio-help 490@findex -audio-help 491Will show the audio subsystem help: list of drivers, tunable 492parameters. 493ETEXI 494 495DEF("soundhw", HAS_ARG, QEMU_OPTION_soundhw, 496 "-soundhw c1,... enable audio support\n" 497 " and only specified sound cards (comma separated list)\n" 498 " use '-soundhw help' to get the list of supported cards\n" 499 " use '-soundhw all' to enable all of them\n", QEMU_ARCH_ALL) 500STEXI 501@item -soundhw @var{card1}[,@var{card2},...] or -soundhw all 502@findex -soundhw 503Enable audio and selected sound hardware. Use 'help' to print all 504available sound hardware. 505 506@example 507qemu-system-i386 -soundhw sb16,adlib disk.img 508qemu-system-i386 -soundhw es1370 disk.img 509qemu-system-i386 -soundhw ac97 disk.img 510qemu-system-i386 -soundhw hda disk.img 511qemu-system-i386 -soundhw all disk.img 512qemu-system-i386 -soundhw help 513@end example 514 515Note that Linux's i810_audio OSS kernel (for AC97) module might 516require manually specifying clocking. 517 518@example 519modprobe i810_audio clocking=48000 520@end example 521ETEXI 522 523DEF("balloon", HAS_ARG, QEMU_OPTION_balloon, 524 "-balloon none disable balloon device\n" 525 "-balloon virtio[,addr=str]\n" 526 " enable virtio balloon device (default)\n", QEMU_ARCH_ALL) 527STEXI 528@item -balloon none 529@findex -balloon 530Disable balloon device. 531@item -balloon virtio[,addr=@var{addr}] 532Enable virtio balloon device (default), optionally with PCI address 533@var{addr}. 534ETEXI 535 536STEXI 537@end table 538ETEXI 539 540DEF("usb", 0, QEMU_OPTION_usb, 541 "-usb enable the USB driver (will be the default soon)\n", 542 QEMU_ARCH_ALL) 543STEXI 544USB options: 545@table @option 546 547@item -usb 548@findex -usb 549Enable the USB driver (will be the default soon) 550ETEXI 551 552DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice, 553 "-usbdevice name add the host or guest USB device 'name'\n", 554 QEMU_ARCH_ALL) 555STEXI 556 557@item -usbdevice @var{devname} 558@findex -usbdevice 559Add the USB device @var{devname}. @xref{usb_devices}. 560 561@table @option 562 563@item mouse 564Virtual Mouse. This will override the PS/2 mouse emulation when activated. 565 566@item tablet 567Pointer device that uses absolute coordinates (like a touchscreen). This 568means QEMU is able to report the mouse position without having to grab the 569mouse. Also overrides the PS/2 mouse emulation when activated. 570 571@item disk:[format=@var{format}]:@var{file} 572Mass storage device based on file. The optional @var{format} argument 573will be used rather than detecting the format. Can be used to specifiy 574@code{format=raw} to avoid interpreting an untrusted format header. 575 576@item host:@var{bus}.@var{addr} 577Pass through the host device identified by @var{bus}.@var{addr} (Linux only). 578 579@item host:@var{vendor_id}:@var{product_id} 580Pass through the host device identified by @var{vendor_id}:@var{product_id} 581(Linux only). 582 583@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev} 584Serial converter to host character device @var{dev}, see @code{-serial} for the 585available devices. 586 587@item braille 588Braille device. This will use BrlAPI to display the braille output on a real 589or fake device. 590 591@item net:@var{options} 592Network adapter that supports CDC ethernet and RNDIS protocols. 593 594@end table 595ETEXI 596 597DEF("device", HAS_ARG, QEMU_OPTION_device, 598 "-device driver[,prop[=value][,...]]\n" 599 " add device (based on driver)\n" 600 " prop=value,... sets driver properties\n" 601 " use '-device help' to print all possible drivers\n" 602 " use '-device driver,help' to print all possible properties\n", 603 QEMU_ARCH_ALL) 604STEXI 605@item -device @var{driver}[,@var{prop}[=@var{value}][,...]] 606@findex -device 607Add device @var{driver}. @var{prop}=@var{value} sets driver 608properties. Valid properties depend on the driver. To get help on 609possible drivers and properties, use @code{-device help} and 610@code{-device @var{driver},help}. 611ETEXI 612 613DEFHEADING() 614 615DEFHEADING(File system options:) 616 617DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev, 618 "-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n" 619 " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", 620 QEMU_ARCH_ALL) 621 622STEXI 623 624@item -fsdev @var{fsdriver},id=@var{id},path=@var{path},[security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] 625@findex -fsdev 626Define a new file system device. Valid options are: 627@table @option 628@item @var{fsdriver} 629This option specifies the fs driver backend to use. 630Currently "local", "handle" and "proxy" file system drivers are supported. 631@item id=@var{id} 632Specifies identifier for this device 633@item path=@var{path} 634Specifies the export path for the file system device. Files under 635this path will be available to the 9p client on the guest. 636@item security_model=@var{security_model} 637Specifies the security model to be used for this export path. 638Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". 639In "passthrough" security model, files are stored using the same 640credentials as they are created on the guest. This requires QEMU 641to run as root. In "mapped-xattr" security model, some of the file 642attributes like uid, gid, mode bits and link target are stored as 643file attributes. For "mapped-file" these attributes are stored in the 644hidden .virtfs_metadata directory. Directories exported by this security model cannot 645interact with other unix tools. "none" security model is same as 646passthrough except the sever won't report failures if it fails to 647set file attributes like ownership. Security model is mandatory 648only for local fsdriver. Other fsdrivers (like handle, proxy) don't take 649security model as a parameter. 650@item writeout=@var{writeout} 651This is an optional argument. The only supported value is "immediate". 652This means that host page cache will be used to read and write data but 653write notification will be sent to the guest only when the data has been 654reported as written by the storage subsystem. 655@item readonly 656Enables exporting 9p share as a readonly mount for guests. By default 657read-write access is given. 658@item socket=@var{socket} 659Enables proxy filesystem driver to use passed socket file for communicating 660with virtfs-proxy-helper 661@item sock_fd=@var{sock_fd} 662Enables proxy filesystem driver to use passed socket descriptor for 663communicating with virtfs-proxy-helper. Usually a helper like libvirt 664will create socketpair and pass one of the fds as sock_fd 665@end table 666 667-fsdev option is used along with -device driver "virtio-9p-pci". 668@item -device virtio-9p-pci,fsdev=@var{id},mount_tag=@var{mount_tag} 669Options for virtio-9p-pci driver are: 670@table @option 671@item fsdev=@var{id} 672Specifies the id value specified along with -fsdev option 673@item mount_tag=@var{mount_tag} 674Specifies the tag name to be used by the guest to mount this export point 675@end table 676 677ETEXI 678 679DEFHEADING() 680 681DEFHEADING(Virtual File system pass-through options:) 682 683DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs, 684 "-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n" 685 " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd]\n", 686 QEMU_ARCH_ALL) 687 688STEXI 689 690@item -virtfs @var{fsdriver}[,path=@var{path}],mount_tag=@var{mount_tag}[,security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}] 691@findex -virtfs 692 693The general form of a Virtual File system pass-through options are: 694@table @option 695@item @var{fsdriver} 696This option specifies the fs driver backend to use. 697Currently "local", "handle" and "proxy" file system drivers are supported. 698@item id=@var{id} 699Specifies identifier for this device 700@item path=@var{path} 701Specifies the export path for the file system device. Files under 702this path will be available to the 9p client on the guest. 703@item security_model=@var{security_model} 704Specifies the security model to be used for this export path. 705Supported security models are "passthrough", "mapped-xattr", "mapped-file" and "none". 706In "passthrough" security model, files are stored using the same 707credentials as they are created on the guest. This requires QEMU 708to run as root. In "mapped-xattr" security model, some of the file 709attributes like uid, gid, mode bits and link target are stored as 710file attributes. For "mapped-file" these attributes are stored in the 711hidden .virtfs_metadata directory. Directories exported by this security model cannot 712interact with other unix tools. "none" security model is same as 713passthrough except the sever won't report failures if it fails to 714set file attributes like ownership. Security model is mandatory only 715for local fsdriver. Other fsdrivers (like handle, proxy) don't take security 716model as a parameter. 717@item writeout=@var{writeout} 718This is an optional argument. The only supported value is "immediate". 719This means that host page cache will be used to read and write data but 720write notification will be sent to the guest only when the data has been 721reported as written by the storage subsystem. 722@item readonly 723Enables exporting 9p share as a readonly mount for guests. By default 724read-write access is given. 725@item socket=@var{socket} 726Enables proxy filesystem driver to use passed socket file for 727communicating with virtfs-proxy-helper. Usually a helper like libvirt 728will create socketpair and pass one of the fds as sock_fd 729@item sock_fd 730Enables proxy filesystem driver to use passed 'sock_fd' as the socket 731descriptor for interfacing with virtfs-proxy-helper 732@end table 733ETEXI 734 735DEF("virtfs_synth", 0, QEMU_OPTION_virtfs_synth, 736 "-virtfs_synth Create synthetic file system image\n", 737 QEMU_ARCH_ALL) 738STEXI 739@item -virtfs_synth 740@findex -virtfs_synth 741Create synthetic file system image 742ETEXI 743 744DEFHEADING() 745 746DEF("name", HAS_ARG, QEMU_OPTION_name, 747 "-name string1[,process=string2]\n" 748 " set the name of the guest\n" 749 " string1 sets the window title and string2 the process name (on Linux)\n", 750 QEMU_ARCH_ALL) 751STEXI 752@item -name @var{name} 753@findex -name 754Sets the @var{name} of the guest. 755This name will be displayed in the SDL window caption. 756The @var{name} will also be used for the VNC server. 757Also optionally set the top visible process name in Linux. 758ETEXI 759 760DEF("uuid", HAS_ARG, QEMU_OPTION_uuid, 761 "-uuid %08x-%04x-%04x-%04x-%012x\n" 762 " specify machine UUID\n", QEMU_ARCH_ALL) 763STEXI 764@item -uuid @var{uuid} 765@findex -uuid 766Set system UUID. 767ETEXI 768 769STEXI 770@end table 771ETEXI 772 773DEFHEADING() 774 775DEFHEADING(Display options:) 776 777STEXI 778@table @option 779ETEXI 780 781DEF("display", HAS_ARG, QEMU_OPTION_display, 782 "-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off]\n" 783 " [,window_close=on|off]|curses|none|\n" 784 " vnc=<display>[,<optargs>]\n" 785 " select display type\n", QEMU_ARCH_ALL) 786STEXI 787@item -display @var{type} 788@findex -display 789Select type of display to use. This option is a replacement for the 790old style -sdl/-curses/... options. Valid values for @var{type} are 791@table @option 792@item sdl 793Display video output via SDL (usually in a separate graphics 794window; see the SDL documentation for other possibilities). 795@item curses 796Display video output via curses. For graphics device models which 797support a text mode, QEMU can display this output using a 798curses/ncurses interface. Nothing is displayed when the graphics 799device is in graphical mode or if the graphics device does not support 800a text mode. Generally only the VGA device models support text mode. 801@item none 802Do not display video output. The guest will still see an emulated 803graphics card, but its output will not be displayed to the QEMU 804user. This option differs from the -nographic option in that it 805only affects what is done with video output; -nographic also changes 806the destination of the serial and parallel port data. 807@item vnc 808Start a VNC server on display <arg> 809@end table 810ETEXI 811 812DEF("nographic", 0, QEMU_OPTION_nographic, 813 "-nographic disable graphical output and redirect serial I/Os to console\n", 814 QEMU_ARCH_ALL) 815STEXI 816@item -nographic 817@findex -nographic 818Normally, QEMU uses SDL to display the VGA output. With this option, 819you can totally disable graphical output so that QEMU is a simple 820command line application. The emulated serial port is redirected on 821the console. Therefore, you can still use QEMU to debug a Linux kernel 822with a serial console. 823ETEXI 824 825DEF("curses", 0, QEMU_OPTION_curses, 826 "-curses use a curses/ncurses interface instead of SDL\n", 827 QEMU_ARCH_ALL) 828STEXI 829@item -curses 830@findex curses 831Normally, QEMU uses SDL to display the VGA output. With this option, 832QEMU can display the VGA output when in text mode using a 833curses/ncurses interface. Nothing is displayed in graphical mode. 834ETEXI 835 836DEF("no-frame", 0, QEMU_OPTION_no_frame, 837 "-no-frame open SDL window without a frame and window decorations\n", 838 QEMU_ARCH_ALL) 839STEXI 840@item -no-frame 841@findex -no-frame 842Do not use decorations for SDL windows and start them using the whole 843available screen space. This makes the using QEMU in a dedicated desktop 844workspace more convenient. 845ETEXI 846 847DEF("alt-grab", 0, QEMU_OPTION_alt_grab, 848 "-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt)\n", 849 QEMU_ARCH_ALL) 850STEXI 851@item -alt-grab 852@findex -alt-grab 853Use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt). Note that this also 854affects the special keys (for fullscreen, monitor-mode switching, etc). 855ETEXI 856 857DEF("ctrl-grab", 0, QEMU_OPTION_ctrl_grab, 858 "-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt)\n", 859 QEMU_ARCH_ALL) 860STEXI 861@item -ctrl-grab 862@findex -ctrl-grab 863Use Right-Ctrl to grab mouse (instead of Ctrl-Alt). Note that this also 864affects the special keys (for fullscreen, monitor-mode switching, etc). 865ETEXI 866 867DEF("no-quit", 0, QEMU_OPTION_no_quit, 868 "-no-quit disable SDL window close capability\n", QEMU_ARCH_ALL) 869STEXI 870@item -no-quit 871@findex -no-quit 872Disable SDL window close capability. 873ETEXI 874 875DEF("sdl", 0, QEMU_OPTION_sdl, 876 "-sdl enable SDL\n", QEMU_ARCH_ALL) 877STEXI 878@item -sdl 879@findex -sdl 880Enable SDL. 881ETEXI 882 883DEF("spice", HAS_ARG, QEMU_OPTION_spice, 884 "-spice [port=port][,tls-port=secured-port][,x509-dir=<dir>]\n" 885 " [,x509-key-file=<file>][,x509-key-password=<file>]\n" 886 " [,x509-cert-file=<file>][,x509-cacert-file=<file>]\n" 887 " [,x509-dh-key-file=<file>][,addr=addr][,ipv4|ipv6]\n" 888 " [,tls-ciphers=<list>]\n" 889 " [,tls-channel=[main|display|cursor|inputs|record|playback]]\n" 890 " [,plaintext-channel=[main|display|cursor|inputs|record|playback]]\n" 891 " [,sasl][,password=<secret>][,disable-ticketing]\n" 892 " [,image-compression=[auto_glz|auto_lz|quic|glz|lz|off]]\n" 893 " [,jpeg-wan-compression=[auto|never|always]]\n" 894 " [,zlib-glz-wan-compression=[auto|never|always]]\n" 895 " [,streaming-video=[off|all|filter]][,disable-copy-paste]\n" 896 " [,agent-mouse=[on|off]][,playback-compression=[on|off]]\n" 897 " [,seamless-migration=[on|off]]\n" 898 " enable spice\n" 899 " at least one of {port, tls-port} is mandatory\n", 900 QEMU_ARCH_ALL) 901STEXI 902@item -spice @var{option}[,@var{option}[,...]] 903@findex -spice 904Enable the spice remote desktop protocol. Valid options are 905 906@table @option 907 908@item port=<nr> 909Set the TCP port spice is listening on for plaintext channels. 910 911@item addr=<addr> 912Set the IP address spice is listening on. Default is any address. 913 914@item ipv4 915@item ipv6 916Force using the specified IP version. 917 918@item password=<secret> 919Set the password you need to authenticate. 920 921@item sasl 922Require that the client use SASL to authenticate with the spice. 923The exact choice of authentication method used is controlled from the 924system / user's SASL configuration file for the 'qemu' service. This 925is typically found in /etc/sasl2/qemu.conf. If running QEMU as an 926unprivileged user, an environment variable SASL_CONF_PATH can be used 927to make it search alternate locations for the service config. 928While some SASL auth methods can also provide data encryption (eg GSSAPI), 929it is recommended that SASL always be combined with the 'tls' and 930'x509' settings to enable use of SSL and server certificates. This 931ensures a data encryption preventing compromise of authentication 932credentials. 933 934@item disable-ticketing 935Allow client connects without authentication. 936 937@item disable-copy-paste 938Disable copy paste between the client and the guest. 939 940@item tls-port=<nr> 941Set the TCP port spice is listening on for encrypted channels. 942 943@item x509-dir=<dir> 944Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir 945 946@item x509-key-file=<file> 947@item x509-key-password=<file> 948@item x509-cert-file=<file> 949@item x509-cacert-file=<file> 950@item x509-dh-key-file=<file> 951The x509 file names can also be configured individually. 952 953@item tls-ciphers=<list> 954Specify which ciphers to use. 955 956@item tls-channel=[main|display|cursor|inputs|record|playback] 957@item plaintext-channel=[main|display|cursor|inputs|record|playback] 958Force specific channel to be used with or without TLS encryption. The 959options can be specified multiple times to configure multiple 960channels. The special name "default" can be used to set the default 961mode. For channels which are not explicitly forced into one mode the 962spice client is allowed to pick tls/plaintext as he pleases. 963 964@item image-compression=[auto_glz|auto_lz|quic|glz|lz|off] 965Configure image compression (lossless). 966Default is auto_glz. 967 968@item jpeg-wan-compression=[auto|never|always] 969@item zlib-glz-wan-compression=[auto|never|always] 970Configure wan image compression (lossy for slow links). 971Default is auto. 972 973@item streaming-video=[off|all|filter] 974Configure video stream detection. Default is filter. 975 976@item agent-mouse=[on|off] 977Enable/disable passing mouse events via vdagent. Default is on. 978 979@item playback-compression=[on|off] 980Enable/disable audio stream compression (using celt 0.5.1). Default is on. 981 982@item seamless-migration=[on|off] 983Enable/disable spice seamless migration. Default is off. 984 985@end table 986ETEXI 987 988DEF("portrait", 0, QEMU_OPTION_portrait, 989 "-portrait rotate graphical output 90 deg left (only PXA LCD)\n", 990 QEMU_ARCH_ALL) 991STEXI 992@item -portrait 993@findex -portrait 994Rotate graphical output 90 deg left (only PXA LCD). 995ETEXI 996 997DEF("rotate", HAS_ARG, QEMU_OPTION_rotate, 998 "-rotate <deg> rotate graphical output some deg left (only PXA LCD)\n", 999 QEMU_ARCH_ALL) 1000STEXI 1001@item -rotate 1002@findex -rotate 1003Rotate graphical output some deg left (only PXA LCD). 1004ETEXI 1005 1006DEF("vga", HAS_ARG, QEMU_OPTION_vga, 1007 "-vga [std|cirrus|vmware|qxl|xenfb|none]\n" 1008 " select video card type\n", QEMU_ARCH_ALL) 1009STEXI 1010@item -vga @var{type} 1011@findex -vga 1012Select type of VGA card to emulate. Valid values for @var{type} are 1013@table @option 1014@item cirrus 1015Cirrus Logic GD5446 Video card. All Windows versions starting from 1016Windows 95 should recognize and use this graphic card. For optimal 1017performances, use 16 bit color depth in the guest and the host OS. 1018(This one is the default) 1019@item std 1020Standard VGA card with Bochs VBE extensions. If your guest OS 1021supports the VESA 2.0 VBE extensions (e.g. Windows XP) and if you want 1022to use high resolution modes (>= 1280x1024x16) then you should use 1023this option. 1024@item vmware 1025VMWare SVGA-II compatible adapter. Use it if you have sufficiently 1026recent XFree86/XOrg server or Windows guest with a driver for this 1027card. 1028@item qxl 1029QXL paravirtual graphic card. It is VGA compatible (including VESA 10302.0 VBE support). Works best with qxl guest drivers installed though. 1031Recommended choice when using the spice protocol. 1032@item none 1033Disable VGA card. 1034@end table 1035ETEXI 1036 1037DEF("full-screen", 0, QEMU_OPTION_full_screen, 1038 "-full-screen start in full screen\n", QEMU_ARCH_ALL) 1039STEXI 1040@item -full-screen 1041@findex -full-screen 1042Start in full screen. 1043ETEXI 1044 1045DEF("g", 1, QEMU_OPTION_g , 1046 "-g WxH[xDEPTH] Set the initial graphical resolution and depth\n", 1047 QEMU_ARCH_PPC | QEMU_ARCH_SPARC) 1048STEXI 1049@item -g @var{width}x@var{height}[x@var{depth}] 1050@findex -g 1051Set the initial graphical resolution and depth (PPC, SPARC only). 1052ETEXI 1053 1054DEF("vnc", HAS_ARG, QEMU_OPTION_vnc , 1055 "-vnc display start a VNC server on display\n", QEMU_ARCH_ALL) 1056STEXI 1057@item -vnc @var{display}[,@var{option}[,@var{option}[,...]]] 1058@findex -vnc 1059Normally, QEMU uses SDL to display the VGA output. With this option, 1060you can have QEMU listen on VNC display @var{display} and redirect the VGA 1061display over the VNC session. It is very useful to enable the usb 1062tablet device when using this option (option @option{-usbdevice 1063tablet}). When using the VNC display, you must use the @option{-k} 1064parameter to set the keyboard layout if you are not using en-us. Valid 1065syntax for the @var{display} is 1066 1067@table @option 1068 1069@item @var{host}:@var{d} 1070 1071TCP connections will only be allowed from @var{host} on display @var{d}. 1072By convention the TCP port is 5900+@var{d}. Optionally, @var{host} can 1073be omitted in which case the server will accept connections from any host. 1074 1075@item unix:@var{path} 1076 1077Connections will be allowed over UNIX domain sockets where @var{path} is the 1078location of a unix socket to listen for connections on. 1079 1080@item none 1081 1082VNC is initialized but not started. The monitor @code{change} command 1083can be used to later start the VNC server. 1084 1085@end table 1086 1087Following the @var{display} value there may be one or more @var{option} flags 1088separated by commas. Valid options are 1089 1090@table @option 1091 1092@item reverse 1093 1094Connect to a listening VNC client via a ``reverse'' connection. The 1095client is specified by the @var{display}. For reverse network 1096connections (@var{host}:@var{d},@code{reverse}), the @var{d} argument 1097is a TCP port number, not a display number. 1098 1099@item password 1100 1101Require that password based authentication is used for client connections. 1102 1103The password must be set separately using the @code{set_password} command in 1104the @ref{pcsys_monitor}. The syntax to change your password is: 1105@code{set_password <protocol> <password>} where <protocol> could be either 1106"vnc" or "spice". 1107 1108If you would like to change <protocol> password expiration, you should use 1109@code{expire_password <protocol> <expiration-time>} where expiration time could 1110be one of the following options: now, never, +seconds or UNIX time of 1111expiration, e.g. +60 to make password expire in 60 seconds, or 1335196800 1112to make password expire on "Mon Apr 23 12:00:00 EDT 2012" (UNIX time for this 1113date and time). 1114 1115You can also use keywords "now" or "never" for the expiration time to 1116allow <protocol> password to expire immediately or never expire. 1117 1118@item tls 1119 1120Require that client use TLS when communicating with the VNC server. This 1121uses anonymous TLS credentials so is susceptible to a man-in-the-middle 1122attack. It is recommended that this option be combined with either the 1123@option{x509} or @option{x509verify} options. 1124 1125@item x509=@var{/path/to/certificate/dir} 1126 1127Valid if @option{tls} is specified. Require that x509 credentials are used 1128for negotiating the TLS session. The server will send its x509 certificate 1129to the client. It is recommended that a password be set on the VNC server 1130to provide authentication of the client when this is used. The path following 1131this option specifies where the x509 certificates are to be loaded from. 1132See the @ref{vnc_security} section for details on generating certificates. 1133 1134@item x509verify=@var{/path/to/certificate/dir} 1135 1136Valid if @option{tls} is specified. Require that x509 credentials are used 1137for negotiating the TLS session. The server will send its x509 certificate 1138to the client, and request that the client send its own x509 certificate. 1139The server will validate the client's certificate against the CA certificate, 1140and reject clients when validation fails. If the certificate authority is 1141trusted, this is a sufficient authentication mechanism. You may still wish 1142to set a password on the VNC server as a second authentication layer. The 1143path following this option specifies where the x509 certificates are to 1144be loaded from. See the @ref{vnc_security} section for details on generating 1145certificates. 1146 1147@item sasl 1148 1149Require that the client use SASL to authenticate with the VNC server. 1150The exact choice of authentication method used is controlled from the 1151system / user's SASL configuration file for the 'qemu' service. This 1152is typically found in /etc/sasl2/qemu.conf. If running QEMU as an 1153unprivileged user, an environment variable SASL_CONF_PATH can be used 1154to make it search alternate locations for the service config. 1155While some SASL auth methods can also provide data encryption (eg GSSAPI), 1156it is recommended that SASL always be combined with the 'tls' and 1157'x509' settings to enable use of SSL and server certificates. This 1158ensures a data encryption preventing compromise of authentication 1159credentials. See the @ref{vnc_security} section for details on using 1160SASL authentication. 1161 1162@item acl 1163 1164Turn on access control lists for checking of the x509 client certificate 1165and SASL party. For x509 certs, the ACL check is made against the 1166certificate's distinguished name. This is something that looks like 1167@code{C=GB,O=ACME,L=Boston,CN=bob}. For SASL party, the ACL check is 1168made against the username, which depending on the SASL plugin, may 1169include a realm component, eg @code{bob} or @code{bob@@EXAMPLE.COM}. 1170When the @option{acl} flag is set, the initial access list will be 1171empty, with a @code{deny} policy. Thus no one will be allowed to 1172use the VNC server until the ACLs have been loaded. This can be 1173achieved using the @code{acl} monitor command. 1174 1175@item lossy 1176 1177Enable lossy compression methods (gradient, JPEG, ...). If this 1178option is set, VNC client may receive lossy framebuffer updates 1179depending on its encoding settings. Enabling this option can save 1180a lot of bandwidth at the expense of quality. 1181 1182@item non-adaptive 1183 1184Disable adaptive encodings. Adaptive encodings are enabled by default. 1185An adaptive encoding will try to detect frequently updated screen regions, 1186and send updates in these regions using a lossy encoding (like JPEG). 1187This can be really helpful to save bandwidth when playing videos. Disabling 1188adaptive encodings allows to restore the original static behavior of encodings 1189like Tight. 1190 1191@item share=[allow-exclusive|force-shared|ignore] 1192 1193Set display sharing policy. 'allow-exclusive' allows clients to ask 1194for exclusive access. As suggested by the rfb spec this is 1195implemented by dropping other connections. Connecting multiple 1196clients in parallel requires all clients asking for a shared session 1197(vncviewer: -shared switch). This is the default. 'force-shared' 1198disables exclusive client access. Useful for shared desktop sessions, 1199where you don't want someone forgetting specify -shared disconnect 1200everybody else. 'ignore' completely ignores the shared flag and 1201allows everybody connect unconditionally. Doesn't conform to the rfb 1202spec but is traditional QEMU behavior. 1203 1204@end table 1205ETEXI 1206 1207STEXI 1208@end table 1209ETEXI 1210 1211ARCHHEADING(, QEMU_ARCH_I386) 1212 1213ARCHHEADING(i386 target only:, QEMU_ARCH_I386) 1214STEXI 1215@table @option 1216ETEXI 1217 1218DEF("win2k-hack", 0, QEMU_OPTION_win2k_hack, 1219 "-win2k-hack use it when installing Windows 2000 to avoid a disk full bug\n", 1220 QEMU_ARCH_I386) 1221STEXI 1222@item -win2k-hack 1223@findex -win2k-hack 1224Use it when installing Windows 2000 to avoid a disk full bug. After 1225Windows 2000 is installed, you no longer need this option (this option 1226slows down the IDE transfers). 1227ETEXI 1228 1229HXCOMM Deprecated by -rtc 1230DEF("rtc-td-hack", 0, QEMU_OPTION_rtc_td_hack, "", QEMU_ARCH_I386) 1231 1232DEF("no-fd-bootchk", 0, QEMU_OPTION_no_fd_bootchk, 1233 "-no-fd-bootchk disable boot signature checking for floppy disks\n", 1234 QEMU_ARCH_I386) 1235STEXI 1236@item -no-fd-bootchk 1237@findex -no-fd-bootchk 1238Disable boot signature checking for floppy disks in Bochs BIOS. It may 1239be needed to boot from old floppy disks. 1240TODO: check reference to Bochs BIOS. 1241ETEXI 1242 1243DEF("no-acpi", 0, QEMU_OPTION_no_acpi, 1244 "-no-acpi disable ACPI\n", QEMU_ARCH_I386) 1245STEXI 1246@item -no-acpi 1247@findex -no-acpi 1248Disable ACPI (Advanced Configuration and Power Interface) support. Use 1249it if your guest OS complains about ACPI problems (PC target machine 1250only). 1251ETEXI 1252 1253DEF("no-hpet", 0, QEMU_OPTION_no_hpet, 1254 "-no-hpet disable HPET\n", QEMU_ARCH_I386) 1255STEXI 1256@item -no-hpet 1257@findex -no-hpet 1258Disable HPET support. 1259ETEXI 1260 1261DEF("acpitable", HAS_ARG, QEMU_OPTION_acpitable, 1262 "-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]\n" 1263 " ACPI table description\n", QEMU_ARCH_I386) 1264STEXI 1265@item -acpitable [sig=@var{str}][,rev=@var{n}][,oem_id=@var{str}][,oem_table_id=@var{str}][,oem_rev=@var{n}] [,asl_compiler_id=@var{str}][,asl_compiler_rev=@var{n}][,data=@var{file1}[:@var{file2}]...] 1266@findex -acpitable 1267Add ACPI table with specified header fields and context from specified files. 1268For file=, take whole ACPI table from the specified files, including all 1269ACPI headers (possible overridden by other options). 1270For data=, only data 1271portion of the table is used, all header information is specified in the 1272command line. 1273ETEXI 1274 1275DEF("smbios", HAS_ARG, QEMU_OPTION_smbios, 1276 "-smbios file=binary\n" 1277 " load SMBIOS entry from binary file\n" 1278 "-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d]\n" 1279 " specify SMBIOS type 0 fields\n" 1280 "-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str]\n" 1281 " [,uuid=uuid][,sku=str][,family=str]\n" 1282 " specify SMBIOS type 1 fields\n", QEMU_ARCH_I386) 1283STEXI 1284@item -smbios file=@var{binary} 1285@findex -smbios 1286Load SMBIOS entry from binary file. 1287 1288@item -smbios type=0[,vendor=@var{str}][,version=@var{str}][,date=@var{str}][,release=@var{%d.%d}] 1289@findex -smbios 1290Specify SMBIOS type 0 fields 1291 1292@item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}] [,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}] [,family=@var{str}] 1293Specify SMBIOS type 1 fields 1294ETEXI 1295 1296DEFHEADING() 1297STEXI 1298@end table 1299ETEXI 1300 1301DEFHEADING(Network options:) 1302STEXI 1303@table @option 1304ETEXI 1305 1306HXCOMM Legacy slirp options (now moved to -net user): 1307#ifdef CONFIG_SLIRP 1308DEF("tftp", HAS_ARG, QEMU_OPTION_tftp, "", QEMU_ARCH_ALL) 1309DEF("bootp", HAS_ARG, QEMU_OPTION_bootp, "", QEMU_ARCH_ALL) 1310DEF("redir", HAS_ARG, QEMU_OPTION_redir, "", QEMU_ARCH_ALL) 1311#ifndef _WIN32 1312DEF("smb", HAS_ARG, QEMU_OPTION_smb, "", QEMU_ARCH_ALL) 1313#endif 1314#endif 1315 1316DEF("net", HAS_ARG, QEMU_OPTION_net, 1317 "-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v]\n" 1318 " create a new Network Interface Card and connect it to VLAN 'n'\n" 1319#ifdef CONFIG_SLIRP 1320 "-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off]\n" 1321 " [,hostname=host][,dhcpstart=addr][,dns=addr][,dnssearch=domain][,tftp=dir]\n" 1322 " [,bootfile=f][,hostfwd=rule][,guestfwd=rule]" 1323#ifndef _WIN32 1324 "[,smb=dir[,smbserver=addr]]\n" 1325#endif 1326 " connect the user mode network stack to VLAN 'n', configure its\n" 1327 " DHCP server and enabled optional services\n" 1328#endif 1329#ifdef _WIN32 1330 "-net tap[,vlan=n][,name=str],ifname=name\n" 1331 " connect the host TAP network interface to VLAN 'n'\n" 1332#else 1333 "-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off]\n" 1334 " connect the host TAP network interface to VLAN 'n'\n" 1335 " use network scripts 'file' (default=" DEFAULT_NETWORK_SCRIPT ")\n" 1336 " to configure it and 'dfile' (default=" DEFAULT_NETWORK_DOWN_SCRIPT ")\n" 1337 " to deconfigure it\n" 1338 " use '[down]script=no' to disable script execution\n" 1339 " use network helper 'helper' (default=" DEFAULT_BRIDGE_HELPER ") to\n" 1340 " configure it\n" 1341 " use 'fd=h' to connect to an already opened TAP interface\n" 1342 " use 'sndbuf=nbytes' to limit the size of the send buffer (the\n" 1343 " default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576')\n" 1344 " use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag\n" 1345 " use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition\n" 1346 " use vhost=on to enable experimental in kernel accelerator\n" 1347 " (only has effect for virtio guests which use MSIX)\n" 1348 " use vhostforce=on to force vhost on for non-MSIX virtio guests\n" 1349 " use 'vhostfd=h' to connect to an already opened vhost net device\n" 1350 "-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper]\n" 1351 " connects a host TAP network interface to a host bridge device 'br'\n" 1352 " (default=" DEFAULT_BRIDGE_INTERFACE ") using the program 'helper'\n" 1353 " (default=" DEFAULT_BRIDGE_HELPER ")\n" 1354#endif 1355 "-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port]\n" 1356 " connect the vlan 'n' to another VLAN using a socket connection\n" 1357 "-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]]\n" 1358 " connect the vlan 'n' to multicast maddr and port\n" 1359 " use 'localaddr=addr' to specify the host address to send packets from\n" 1360 "-net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port]\n" 1361 " connect the vlan 'n' to another VLAN using an UDP tunnel\n" 1362#ifdef CONFIG_VDE 1363 "-net vde[,vlan=n][,name=str][,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]\n" 1364 " connect the vlan 'n' to port 'n' of a vde switch running\n" 1365 " on host and listening for incoming connections on 'socketpath'.\n" 1366 " Use group 'groupname' and mode 'octalmode' to change default\n" 1367 " ownership and permissions for communication port.\n" 1368#endif 1369 "-net dump[,vlan=n][,file=f][,len=n]\n" 1370 " dump traffic on vlan 'n' to file 'f' (max n bytes per packet)\n" 1371 "-net none use it alone to have zero network devices. If no -net option\n" 1372 " is provided, the default is '-net nic -net user'\n", QEMU_ARCH_ALL) 1373DEF("netdev", HAS_ARG, QEMU_OPTION_netdev, 1374 "-netdev [" 1375#ifdef CONFIG_SLIRP 1376 "user|" 1377#endif 1378 "tap|" 1379 "bridge|" 1380#ifdef CONFIG_VDE 1381 "vde|" 1382#endif 1383 "socket],id=str[,option][,option][,...]\n", QEMU_ARCH_ALL) 1384STEXI 1385@item -net nic[,vlan=@var{n}][,macaddr=@var{mac}][,model=@var{type}] [,name=@var{name}][,addr=@var{addr}][,vectors=@var{v}] 1386@findex -net 1387Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n} 1388= 0 is the default). The NIC is an e1000 by default on the PC 1389target. Optionally, the MAC address can be changed to @var{mac}, the 1390device address set to @var{addr} (PCI cards only), 1391and a @var{name} can be assigned for use in monitor commands. 1392Optionally, for PCI cards, you can specify the number @var{v} of MSI-X vectors 1393that the card should have; this option currently only affects virtio cards; set 1394@var{v} = 0 to disable MSI-X. If no @option{-net} option is specified, a single 1395NIC is created. QEMU can emulate several different models of network card. 1396Valid values for @var{type} are 1397@code{virtio}, @code{i82551}, @code{i82557b}, @code{i82559er}, 1398@code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139}, 1399@code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}. 1400Not all devices are supported on all targets. Use @code{-net nic,model=help} 1401for a list of available devices for your target. 1402 1403@item -netdev user,id=@var{id}[,@var{option}][,@var{option}][,...] 1404@item -net user[,@var{option}][,@var{option}][,...] 1405Use the user mode network stack which requires no administrator 1406privilege to run. Valid options are: 1407 1408@table @option 1409@item vlan=@var{n} 1410Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default). 1411 1412@item id=@var{id} 1413@item name=@var{name} 1414Assign symbolic name for use in monitor commands. 1415 1416@item net=@var{addr}[/@var{mask}] 1417Set IP network address the guest will see. Optionally specify the netmask, 1418either in the form a.b.c.d or as number of valid top-most bits. Default is 141910.0.2.0/24. 1420 1421@item host=@var{addr} 1422Specify the guest-visible address of the host. Default is the 2nd IP in the 1423guest network, i.e. x.x.x.2. 1424 1425@item restrict=on|off 1426If this option is enabled, the guest will be isolated, i.e. it will not be 1427able to contact the host and no guest IP packets will be routed over the host 1428to the outside. This option does not affect any explicitly set forwarding rules. 1429 1430@item hostname=@var{name} 1431Specifies the client hostname reported by the built-in DHCP server. 1432 1433@item dhcpstart=@var{addr} 1434Specify the first of the 16 IPs the built-in DHCP server can assign. Default 1435is the 15th to 31st IP in the guest network, i.e. x.x.x.15 to x.x.x.31. 1436 1437@item dns=@var{addr} 1438Specify the guest-visible address of the virtual nameserver. The address must 1439be different from the host address. Default is the 3rd IP in the guest network, 1440i.e. x.x.x.3. 1441 1442@item dnssearch=@var{domain} 1443Provides an entry for the domain-search list sent by the built-in 1444DHCP server. More than one domain suffix can be transmitted by specifying 1445this option multiple times. If supported, this will cause the guest to 1446automatically try to append the given domain suffix(es) in case a domain name 1447can not be resolved. 1448 1449Example: 1450@example 1451qemu -net user,dnssearch=mgmt.example.org,dnssearch=example.org [...] 1452@end example 1453 1454@item tftp=@var{dir} 1455When using the user mode network stack, activate a built-in TFTP 1456server. The files in @var{dir} will be exposed as the root of a TFTP server. 1457The TFTP client on the guest must be configured in binary mode (use the command 1458@code{bin} of the Unix TFTP client). 1459 1460@item bootfile=@var{file} 1461When using the user mode network stack, broadcast @var{file} as the BOOTP 1462filename. In conjunction with @option{tftp}, this can be used to network boot 1463a guest from a local directory. 1464 1465Example (using pxelinux): 1466@example 1467qemu-system-i386 -hda linux.img -boot n -net user,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 1468@end example 1469 1470@item smb=@var{dir}[,smbserver=@var{addr}] 1471When using the user mode network stack, activate a built-in SMB 1472server so that Windows OSes can access to the host files in @file{@var{dir}} 1473transparently. The IP address of the SMB server can be set to @var{addr}. By 1474default the 4th IP in the guest network is used, i.e. x.x.x.4. 1475 1476In the guest Windows OS, the line: 1477@example 147810.0.2.4 smbserver 1479@end example 1480must be added in the file @file{C:\WINDOWS\LMHOSTS} (for windows 9x/Me) 1481or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows NT/2000). 1482 1483Then @file{@var{dir}} can be accessed in @file{\\smbserver\qemu}. 1484 1485Note that a SAMBA server must be installed on the host OS. 1486QEMU was tested successfully with smbd versions from Red Hat 9, 1487Fedora Core 3 and OpenSUSE 11.x. 1488 1489@item hostfwd=[tcp|udp]:[@var{hostaddr}]:@var{hostport}-[@var{guestaddr}]:@var{guestport} 1490Redirect incoming TCP or UDP connections to the host port @var{hostport} to 1491the guest IP address @var{guestaddr} on guest port @var{guestport}. If 1492@var{guestaddr} is not specified, its value is x.x.x.15 (default first address 1493given by the built-in DHCP server). By specifying @var{hostaddr}, the rule can 1494be bound to a specific host interface. If no connection type is set, TCP is 1495used. This option can be given multiple times. 1496 1497For example, to redirect host X11 connection from screen 1 to guest 1498screen 0, use the following: 1499 1500@example 1501# on the host 1502qemu-system-i386 -net user,hostfwd=tcp:127.0.0.1:6001-:6000 [...] 1503# this host xterm should open in the guest X11 server 1504xterm -display :1 1505@end example 1506 1507To redirect telnet connections from host port 5555 to telnet port on 1508the guest, use the following: 1509 1510@example 1511# on the host 1512qemu-system-i386 -net user,hostfwd=tcp::5555-:23 [...] 1513telnet localhost 5555 1514@end example 1515 1516Then when you use on the host @code{telnet localhost 5555}, you 1517connect to the guest telnet server. 1518 1519@item guestfwd=[tcp]:@var{server}:@var{port}-@var{dev} 1520@item guestfwd=[tcp]:@var{server}:@var{port}-@var{cmd:command} 1521Forward guest TCP connections to the IP address @var{server} on port @var{port} 1522to the character device @var{dev} or to a program executed by @var{cmd:command} 1523which gets spawned for each connection. This option can be given multiple times. 1524 1525You can either use a chardev directly and have that one used throughout QEMU's 1526lifetime, like in the following example: 1527 1528@example 1529# open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever 1530# the guest accesses it 1531qemu -net user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321 [...] 1532@end example 1533 1534Or you can execute a command on every TCP connection established by the guest, 1535so that QEMU behaves similar to an inetd process for that virtual server: 1536 1537@example 1538# call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234 1539# and connect the TCP stream to its stdin/stdout 1540qemu -net 'user,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321' 1541@end example 1542 1543@end table 1544 1545Note: Legacy stand-alone options -tftp, -bootp, -smb and -redir are still 1546processed and applied to -net user. Mixing them with the new configuration 1547syntax gives undefined results. Their use for new applications is discouraged 1548as they will be removed from future versions. 1549 1550@item -netdev tap,id=@var{id}[,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}] 1551@item -net tap[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}] 1552Connect the host TAP network interface @var{name} to VLAN @var{n}. 1553 1554Use the network script @var{file} to configure it and the network script 1555@var{dfile} to deconfigure it. If @var{name} is not provided, the OS 1556automatically provides one. The default network configure script is 1557@file{/etc/qemu-ifup} and the default network deconfigure script is 1558@file{/etc/qemu-ifdown}. Use @option{script=no} or @option{downscript=no} 1559to disable script execution. 1560 1561If running QEMU as an unprivileged user, use the network helper 1562@var{helper} to configure the TAP interface. The default network 1563helper executable is @file{/usr/local/libexec/qemu-bridge-helper}. 1564 1565@option{fd}=@var{h} can be used to specify the handle of an already 1566opened host TAP interface. 1567 1568Examples: 1569 1570@example 1571#launch a QEMU instance with the default network script 1572qemu-system-i386 linux.img -net nic -net tap 1573@end example 1574 1575@example 1576#launch a QEMU instance with two NICs, each one connected 1577#to a TAP device 1578qemu-system-i386 linux.img \ 1579 -net nic,vlan=0 -net tap,vlan=0,ifname=tap0 \ 1580 -net nic,vlan=1 -net tap,vlan=1,ifname=tap1 1581@end example 1582 1583@example 1584#launch a QEMU instance with the default network helper to 1585#connect a TAP device to bridge br0 1586qemu-system-i386 linux.img \ 1587 -net nic -net tap,"helper=/usr/local/libexec/qemu-bridge-helper" 1588@end example 1589 1590@item -netdev bridge,id=@var{id}[,br=@var{bridge}][,helper=@var{helper}] 1591@item -net bridge[,vlan=@var{n}][,name=@var{name}][,br=@var{bridge}][,helper=@var{helper}] 1592Connect a host TAP network interface to a host bridge device. 1593 1594Use the network helper @var{helper} to configure the TAP interface and 1595attach it to the bridge. The default network helper executable is 1596@file{/usr/local/libexec/qemu-bridge-helper} and the default bridge 1597device is @file{br0}. 1598 1599Examples: 1600 1601@example 1602#launch a QEMU instance with the default network helper to 1603#connect a TAP device to bridge br0 1604qemu-system-i386 linux.img -net bridge -net nic,model=virtio 1605@end example 1606 1607@example 1608#launch a QEMU instance with the default network helper to 1609#connect a TAP device to bridge qemubr0 1610qemu-system-i386 linux.img -net bridge,br=qemubr0 -net nic,model=virtio 1611@end example 1612 1613@item -netdev socket,id=@var{id}[,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] 1614@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}] [,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}] 1615 1616Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual 1617machine using a TCP socket connection. If @option{listen} is 1618specified, QEMU waits for incoming connections on @var{port} 1619(@var{host} is optional). @option{connect} is used to connect to 1620another QEMU instance using the @option{listen} option. @option{fd}=@var{h} 1621specifies an already opened TCP socket. 1622 1623Example: 1624@example 1625# launch a first QEMU instance 1626qemu-system-i386 linux.img \ 1627 -net nic,macaddr=52:54:00:12:34:56 \ 1628 -net socket,listen=:1234 1629# connect the VLAN 0 of this instance to the VLAN 0 1630# of the first instance 1631qemu-system-i386 linux.img \ 1632 -net nic,macaddr=52:54:00:12:34:57 \ 1633 -net socket,connect=127.0.0.1:1234 1634@end example 1635 1636@item -netdev socket,id=@var{id}[,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] 1637@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]] 1638 1639Create a VLAN @var{n} shared with another QEMU virtual 1640machines using a UDP multicast socket, effectively making a bus for 1641every QEMU with same multicast address @var{maddr} and @var{port}. 1642NOTES: 1643@enumerate 1644@item 1645Several QEMU can be running on different hosts and share same bus (assuming 1646correct multicast setup for these hosts). 1647@item 1648mcast support is compatible with User Mode Linux (argument @option{eth@var{N}=mcast}), see 1649@url{http://user-mode-linux.sf.net}. 1650@item 1651Use @option{fd=h} to specify an already opened UDP multicast socket. 1652@end enumerate 1653 1654Example: 1655@example 1656# launch one QEMU instance 1657qemu-system-i386 linux.img \ 1658 -net nic,macaddr=52:54:00:12:34:56 \ 1659 -net socket,mcast=230.0.0.1:1234 1660# launch another QEMU instance on same "bus" 1661qemu-system-i386 linux.img \ 1662 -net nic,macaddr=52:54:00:12:34:57 \ 1663 -net socket,mcast=230.0.0.1:1234 1664# launch yet another QEMU instance on same "bus" 1665qemu-system-i386 linux.img \ 1666 -net nic,macaddr=52:54:00:12:34:58 \ 1667 -net socket,mcast=230.0.0.1:1234 1668@end example 1669 1670Example (User Mode Linux compat.): 1671@example 1672# launch QEMU instance (note mcast address selected 1673# is UML's default) 1674qemu-system-i386 linux.img \ 1675 -net nic,macaddr=52:54:00:12:34:56 \ 1676 -net socket,mcast=239.192.168.1:1102 1677# launch UML 1678/path/to/linux ubd0=/path/to/root_fs eth0=mcast 1679@end example 1680 1681Example (send packets from host's 1.2.3.4): 1682@example 1683qemu-system-i386 linux.img \ 1684 -net nic,macaddr=52:54:00:12:34:56 \ 1685 -net socket,mcast=239.192.168.1:1102,localaddr=1.2.3.4 1686@end example 1687 1688@item -netdev vde,id=@var{id}[,sock=@var{socketpath}][,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] 1689@item -net vde[,vlan=@var{n}][,name=@var{name}][,sock=@var{socketpath}] [,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}] 1690Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and 1691listening for incoming connections on @var{socketpath}. Use GROUP @var{groupname} 1692and MODE @var{octalmode} to change default ownership and permissions for 1693communication port. This option is only available if QEMU has been compiled 1694with vde support enabled. 1695 1696Example: 1697@example 1698# launch vde switch 1699vde_switch -F -sock /tmp/myswitch 1700# launch QEMU instance 1701qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch 1702@end example 1703 1704@item -net dump[,vlan=@var{n}][,file=@var{file}][,len=@var{len}] 1705Dump network traffic on VLAN @var{n} to file @var{file} (@file{qemu-vlan0.pcap} by default). 1706At most @var{len} bytes (64k by default) per packet are stored. The file format is 1707libpcap, so it can be analyzed with tools such as tcpdump or Wireshark. 1708 1709@item -net none 1710Indicate that no network devices should be configured. It is used to 1711override the default configuration (@option{-net nic -net user}) which 1712is activated if no @option{-net} options are provided. 1713 1714@end table 1715ETEXI 1716 1717DEFHEADING() 1718 1719DEFHEADING(Character device options:) 1720 1721DEF("chardev", HAS_ARG, QEMU_OPTION_chardev, 1722 "-chardev null,id=id[,mux=on|off]\n" 1723 "-chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]\n" 1724 " [,server][,nowait][,telnet][,mux=on|off] (tcp)\n" 1725 "-chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix)\n" 1726 "-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n" 1727 " [,localport=localport][,ipv4][,ipv6][,mux=on|off]\n" 1728 "-chardev msmouse,id=id[,mux=on|off]\n" 1729 "-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n" 1730 " [,mux=on|off]\n" 1731 "-chardev file,id=id,path=path[,mux=on|off]\n" 1732 "-chardev pipe,id=id,path=path[,mux=on|off]\n" 1733#ifdef _WIN32 1734 "-chardev console,id=id[,mux=on|off]\n" 1735 "-chardev serial,id=id,path=path[,mux=on|off]\n" 1736#else 1737 "-chardev pty,id=id[,mux=on|off]\n" 1738 "-chardev stdio,id=id[,mux=on|off][,signal=on|off]\n" 1739#endif 1740#ifdef CONFIG_BRLAPI 1741 "-chardev braille,id=id[,mux=on|off]\n" 1742#endif 1743#if defined(__linux__) || defined(__sun__) || defined(__FreeBSD__) \ 1744 || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__DragonFly__) 1745 "-chardev serial,id=id,path=path[,mux=on|off]\n" 1746 "-chardev tty,id=id,path=path[,mux=on|off]\n" 1747#endif 1748#if defined(__linux__) || defined(__FreeBSD__) || defined(__DragonFly__) 1749 "-chardev parallel,id=id,path=path[,mux=on|off]\n" 1750 "-chardev parport,id=id,path=path[,mux=on|off]\n" 1751#endif 1752#if defined(CONFIG_SPICE) 1753 "-chardev spicevmc,id=id,name=name[,debug=debug]\n" 1754 "-chardev spiceport,id=id,name=name[,debug=debug]\n" 1755#endif 1756 , QEMU_ARCH_ALL 1757) 1758 1759STEXI 1760 1761The general form of a character device option is: 1762@table @option 1763 1764@item -chardev @var{backend} ,id=@var{id} [,mux=on|off] [,@var{options}] 1765@findex -chardev 1766Backend is one of: 1767@option{null}, 1768@option{socket}, 1769@option{udp}, 1770@option{msmouse}, 1771@option{vc}, 1772@option{file}, 1773@option{pipe}, 1774@option{console}, 1775@option{serial}, 1776@option{pty}, 1777@option{stdio}, 1778@option{braille}, 1779@option{tty}, 1780@option{parallel}, 1781@option{parport}, 1782@option{spicevmc}. 1783@option{spiceport}. 1784The specific backend will determine the applicable options. 1785 1786All devices must have an id, which can be any string up to 127 characters long. 1787It is used to uniquely identify this device in other command line directives. 1788 1789A character device may be used in multiplexing mode by multiple front-ends. 1790The key sequence of @key{Control-a} and @key{c} will rotate the input focus 1791between attached front-ends. Specify @option{mux=on} to enable this mode. 1792 1793Options to each backend are described below. 1794 1795@item -chardev null ,id=@var{id} 1796A void device. This device will not emit any data, and will drop any data it 1797receives. The null backend does not take any options. 1798 1799@item -chardev socket ,id=@var{id} [@var{TCP options} or @var{unix options}] [,server] [,nowait] [,telnet] 1800 1801Create a two-way stream socket, which can be either a TCP or a unix socket. A 1802unix socket will be created if @option{path} is specified. Behaviour is 1803undefined if TCP options are specified for a unix socket. 1804 1805@option{server} specifies that the socket shall be a listening socket. 1806 1807@option{nowait} specifies that QEMU should not block waiting for a client to 1808connect to a listening socket. 1809 1810@option{telnet} specifies that traffic on the socket should interpret telnet 1811escape sequences. 1812 1813TCP and unix socket options are given below: 1814 1815@table @option 1816 1817@item TCP options: port=@var{port} [,host=@var{host}] [,to=@var{to}] [,ipv4] [,ipv6] [,nodelay] 1818 1819@option{host} for a listening socket specifies the local address to be bound. 1820For a connecting socket species the remote host to connect to. @option{host} is 1821optional for listening sockets. If not specified it defaults to @code{0.0.0.0}. 1822 1823@option{port} for a listening socket specifies the local port to be bound. For a 1824connecting socket specifies the port on the remote host to connect to. 1825@option{port} can be given as either a port number or a service name. 1826@option{port} is required. 1827 1828@option{to} is only relevant to listening sockets. If it is specified, and 1829@option{port} cannot be bound, QEMU will attempt to bind to subsequent ports up 1830to and including @option{to} until it succeeds. @option{to} must be specified 1831as a port number. 1832 1833@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. 1834If neither is specified the socket may use either protocol. 1835 1836@option{nodelay} disables the Nagle algorithm. 1837 1838@item unix options: path=@var{path} 1839 1840@option{path} specifies the local path of the unix socket. @option{path} is 1841required. 1842 1843@end table 1844 1845@item -chardev udp ,id=@var{id} [,host=@var{host}] ,port=@var{port} [,localaddr=@var{localaddr}] [,localport=@var{localport}] [,ipv4] [,ipv6] 1846 1847Sends all traffic from the guest to a remote host over UDP. 1848 1849@option{host} specifies the remote host to connect to. If not specified it 1850defaults to @code{localhost}. 1851 1852@option{port} specifies the port on the remote host to connect to. @option{port} 1853is required. 1854 1855@option{localaddr} specifies the local address to bind to. If not specified it 1856defaults to @code{0.0.0.0}. 1857 1858@option{localport} specifies the local port to bind to. If not specified any 1859available local port will be used. 1860 1861@option{ipv4} and @option{ipv6} specify that either IPv4 or IPv6 must be used. 1862If neither is specified the device may use either protocol. 1863 1864@item -chardev msmouse ,id=@var{id} 1865 1866Forward QEMU's emulated msmouse events to the guest. @option{msmouse} does not 1867take any options. 1868 1869@item -chardev vc ,id=@var{id} [[,width=@var{width}] [,height=@var{height}]] [[,cols=@var{cols}] [,rows=@var{rows}]] 1870 1871Connect to a QEMU text console. @option{vc} may optionally be given a specific 1872size. 1873 1874@option{width} and @option{height} specify the width and height respectively of 1875the console, in pixels. 1876 1877@option{cols} and @option{rows} specify that the console be sized to fit a text 1878console with the given dimensions. 1879 1880@item -chardev file ,id=@var{id} ,path=@var{path} 1881 1882Log all traffic received from the guest to a file. 1883 1884@option{path} specifies the path of the file to be opened. This file will be 1885created if it does not already exist, and overwritten if it does. @option{path} 1886is required. 1887 1888@item -chardev pipe ,id=@var{id} ,path=@var{path} 1889 1890Create a two-way connection to the guest. The behaviour differs slightly between 1891Windows hosts and other hosts: 1892 1893On Windows, a single duplex pipe will be created at 1894@file{\\.pipe\@option{path}}. 1895 1896On other hosts, 2 pipes will be created called @file{@option{path}.in} and 1897@file{@option{path}.out}. Data written to @file{@option{path}.in} will be 1898received by the guest. Data written by the guest can be read from 1899@file{@option{path}.out}. QEMU will not create these fifos, and requires them to 1900be present. 1901 1902@option{path} forms part of the pipe path as described above. @option{path} is 1903required. 1904 1905@item -chardev console ,id=@var{id} 1906 1907Send traffic from the guest to QEMU's standard output. @option{console} does not 1908take any options. 1909 1910@option{console} is only available on Windows hosts. 1911 1912@item -chardev serial ,id=@var{id} ,path=@option{path} 1913 1914Send traffic from the guest to a serial device on the host. 1915 1916On Unix hosts serial will actually accept any tty device, 1917not only serial lines. 1918 1919@option{path} specifies the name of the serial device to open. 1920 1921@item -chardev pty ,id=@var{id} 1922 1923Create a new pseudo-terminal on the host and connect to it. @option{pty} does 1924not take any options. 1925 1926@option{pty} is not available on Windows hosts. 1927 1928@item -chardev stdio ,id=@var{id} [,signal=on|off] 1929Connect to standard input and standard output of the QEMU process. 1930 1931@option{signal} controls if signals are enabled on the terminal, that includes 1932exiting QEMU with the key sequence @key{Control-c}. This option is enabled by 1933default, use @option{signal=off} to disable it. 1934 1935@option{stdio} is not available on Windows hosts. 1936 1937@item -chardev braille ,id=@var{id} 1938 1939Connect to a local BrlAPI server. @option{braille} does not take any options. 1940 1941@item -chardev tty ,id=@var{id} ,path=@var{path} 1942 1943@option{tty} is only available on Linux, Sun, FreeBSD, NetBSD, OpenBSD and 1944DragonFlyBSD hosts. It is an alias for -serial. 1945 1946@option{path} specifies the path to the tty. @option{path} is required. 1947 1948@item -chardev parallel ,id=@var{id} ,path=@var{path} 1949@item -chardev parport ,id=@var{id} ,path=@var{path} 1950 1951@option{parallel} is only available on Linux, FreeBSD and DragonFlyBSD hosts. 1952 1953Connect to a local parallel port. 1954 1955@option{path} specifies the path to the parallel port device. @option{path} is 1956required. 1957 1958@item -chardev spicevmc ,id=@var{id} ,debug=@var{debug}, name=@var{name} 1959 1960@option{spicevmc} is only available when spice support is built in. 1961 1962@option{debug} debug level for spicevmc 1963 1964@option{name} name of spice channel to connect to 1965 1966Connect to a spice virtual machine channel, such as vdiport. 1967 1968@item -chardev spiceport ,id=@var{id} ,debug=@var{debug}, name=@var{name} 1969 1970@option{spiceport} is only available when spice support is built in. 1971 1972@option{debug} debug level for spicevmc 1973 1974@option{name} name of spice port to connect to 1975 1976Connect to a spice port, allowing a Spice client to handle the traffic 1977identified by a name (preferably a fqdn). 1978 1979@end table 1980ETEXI 1981 1982DEFHEADING() 1983 1984STEXI 1985DEFHEADING(Device URL Syntax:) 1986 1987In addition to using normal file images for the emulated storage devices, 1988QEMU can also use networked resources such as iSCSI devices. These are 1989specified using a special URL syntax. 1990 1991@table @option 1992@item iSCSI 1993iSCSI support allows QEMU to access iSCSI resources directly and use as 1994images for the guest storage. Both disk and cdrom images are supported. 1995 1996Syntax for specifying iSCSI LUNs is 1997``iscsi://<target-ip>[:<port>]/<target-iqn>/<lun>'' 1998 1999By default qemu will use the iSCSI initiator-name 2000'iqn.2008-11.org.linux-kvm[:<name>]' but this can also be set from the command 2001line or a configuration file. 2002 2003 2004Example (without authentication): 2005@example 2006qemu-system-i386 -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ 2007 -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ 2008 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 2009@end example 2010 2011Example (CHAP username/password via URL): 2012@example 2013qemu-system-i386 -drive file=iscsi://user%password@@192.0.2.1/iqn.2001-04.com.example/1 2014@end example 2015 2016Example (CHAP username/password via environment variables): 2017@example 2018LIBISCSI_CHAP_USERNAME="user" \ 2019LIBISCSI_CHAP_PASSWORD="password" \ 2020qemu-system-i386 -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 2021@end example 2022 2023iSCSI support is an optional feature of QEMU and only available when 2024compiled and linked against libiscsi. 2025ETEXI 2026DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi, 2027 "-iscsi [user=user][,password=password]\n" 2028 " [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE\n" 2029 " [,initiator-name=iqn]\n" 2030 " iSCSI session parameters\n", QEMU_ARCH_ALL) 2031STEXI 2032 2033iSCSI parameters such as username and password can also be specified via 2034a configuration file. See qemu-doc for more information and examples. 2035 2036@item NBD 2037QEMU supports NBD (Network Block Devices) both using TCP protocol as well 2038as Unix Domain Sockets. 2039 2040Syntax for specifying a NBD device using TCP 2041``nbd:<server-ip>:<port>[:exportname=<export>]'' 2042 2043Syntax for specifying a NBD device using Unix Domain Sockets 2044``nbd:unix:<domain-socket>[:exportname=<export>]'' 2045 2046 2047Example for TCP 2048@example 2049qemu-system-i386 --drive file=nbd:192.0.2.1:30000 2050@end example 2051 2052Example for Unix Domain Sockets 2053@example 2054qemu-system-i386 --drive file=nbd:unix:/tmp/nbd-socket 2055@end example 2056 2057@item Sheepdog 2058Sheepdog is a distributed storage system for QEMU. 2059QEMU supports using either local sheepdog devices or remote networked 2060devices. 2061 2062Syntax for specifying a sheepdog device 2063@table @list 2064``sheepdog:<vdiname>'' 2065 2066``sheepdog:<vdiname>:<snapid>'' 2067 2068``sheepdog:<vdiname>:<tag>'' 2069 2070``sheepdog:<host>:<port>:<vdiname>'' 2071 2072``sheepdog:<host>:<port>:<vdiname>:<snapid>'' 2073 2074``sheepdog:<host>:<port>:<vdiname>:<tag>'' 2075@end table 2076 2077Example 2078@example 2079qemu-system-i386 --drive file=sheepdog:192.0.2.1:30000:MyVirtualMachine 2080@end example 2081 2082See also @url{http://http://www.osrg.net/sheepdog/}. 2083 2084@item GlusterFS 2085GlusterFS is an user space distributed file system. 2086QEMU supports the use of GlusterFS volumes for hosting VM disk images using 2087TCP, Unix Domain Sockets and RDMA transport protocols. 2088 2089Syntax for specifying a VM disk image on GlusterFS volume is 2090@example 2091gluster[+transport]://[server[:port]]/volname/image[?socket=...] 2092@end example 2093 2094 2095Example 2096@example 2097qemu-system-x86_84 --drive file=gluster://192.0.2.1/testvol/a.img 2098@end example 2099 2100See also @url{http://www.gluster.org}. 2101@end table 2102ETEXI 2103 2104DEFHEADING(Bluetooth(R) options:) 2105 2106DEF("bt", HAS_ARG, QEMU_OPTION_bt, \ 2107 "-bt hci,null dumb bluetooth HCI - doesn't respond to commands\n" \ 2108 "-bt hci,host[:id]\n" \ 2109 " use host's HCI with the given name\n" \ 2110 "-bt hci[,vlan=n]\n" \ 2111 " emulate a standard HCI in virtual scatternet 'n'\n" \ 2112 "-bt vhci[,vlan=n]\n" \ 2113 " add host computer to virtual scatternet 'n' using VHCI\n" \ 2114 "-bt device:dev[,vlan=n]\n" \ 2115 " emulate a bluetooth device 'dev' in scatternet 'n'\n", 2116 QEMU_ARCH_ALL) 2117STEXI 2118@table @option 2119 2120@item -bt hci[...] 2121@findex -bt 2122Defines the function of the corresponding Bluetooth HCI. -bt options 2123are matched with the HCIs present in the chosen machine type. For 2124example when emulating a machine with only one HCI built into it, only 2125the first @code{-bt hci[...]} option is valid and defines the HCI's 2126logic. The Transport Layer is decided by the machine type. Currently 2127the machines @code{n800} and @code{n810} have one HCI and all other 2128machines have none. 2129 2130@anchor{bt-hcis} 2131The following three types are recognized: 2132 2133@table @option 2134@item -bt hci,null 2135(default) The corresponding Bluetooth HCI assumes no internal logic 2136and will not respond to any HCI commands or emit events. 2137 2138@item -bt hci,host[:@var{id}] 2139(@code{bluez} only) The corresponding HCI passes commands / events 2140to / from the physical HCI identified by the name @var{id} (default: 2141@code{hci0}) on the computer running QEMU. Only available on @code{bluez} 2142capable systems like Linux. 2143 2144@item -bt hci[,vlan=@var{n}] 2145Add a virtual, standard HCI that will participate in the Bluetooth 2146scatternet @var{n} (default @code{0}). Similarly to @option{-net} 2147VLANs, devices inside a bluetooth network @var{n} can only communicate 2148with other devices in the same network (scatternet). 2149@end table 2150 2151@item -bt vhci[,vlan=@var{n}] 2152(Linux-host only) Create a HCI in scatternet @var{n} (default 0) attached 2153to the host bluetooth stack instead of to the emulated target. This 2154allows the host and target machines to participate in a common scatternet 2155and communicate. Requires the Linux @code{vhci} driver installed. Can 2156be used as following: 2157 2158@example 2159qemu-system-i386 [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5 2160@end example 2161 2162@item -bt device:@var{dev}[,vlan=@var{n}] 2163Emulate a bluetooth device @var{dev} and place it in network @var{n} 2164(default @code{0}). QEMU can only emulate one type of bluetooth devices 2165currently: 2166 2167@table @option 2168@item keyboard 2169Virtual wireless keyboard implementing the HIDP bluetooth profile. 2170@end table 2171@end table 2172ETEXI 2173 2174DEFHEADING() 2175 2176DEFHEADING(Linux/Multiboot boot specific:) 2177STEXI 2178 2179When using these options, you can use a given Linux or Multiboot 2180kernel without installing it in the disk image. It can be useful 2181for easier testing of various kernels. 2182 2183@table @option 2184ETEXI 2185 2186DEF("kernel", HAS_ARG, QEMU_OPTION_kernel, \ 2187 "-kernel bzImage use 'bzImage' as kernel image\n", QEMU_ARCH_ALL) 2188STEXI 2189@item -kernel @var{bzImage} 2190@findex -kernel 2191Use @var{bzImage} as kernel image. The kernel can be either a Linux kernel 2192or in multiboot format. 2193ETEXI 2194 2195DEF("append", HAS_ARG, QEMU_OPTION_append, \ 2196 "-append cmdline use 'cmdline' as kernel command line\n", QEMU_ARCH_ALL) 2197STEXI 2198@item -append @var{cmdline} 2199@findex -append 2200Use @var{cmdline} as kernel command line 2201ETEXI 2202 2203DEF("initrd", HAS_ARG, QEMU_OPTION_initrd, \ 2204 "-initrd file use 'file' as initial ram disk\n", QEMU_ARCH_ALL) 2205STEXI 2206@item -initrd @var{file} 2207@findex -initrd 2208Use @var{file} as initial ram disk. 2209 2210@item -initrd "@var{file1} arg=foo,@var{file2}" 2211 2212This syntax is only available with multiboot. 2213 2214Use @var{file1} and @var{file2} as modules and pass arg=foo as parameter to the 2215first module. 2216ETEXI 2217 2218DEF("dtb", HAS_ARG, QEMU_OPTION_dtb, \ 2219 "-dtb file use 'file' as device tree image\n", QEMU_ARCH_ALL) 2220STEXI 2221@item -dtb @var{file} 2222@findex -dtb 2223Use @var{file} as a device tree binary (dtb) image and pass it to the kernel 2224on boot. 2225ETEXI 2226 2227STEXI 2228@end table 2229ETEXI 2230 2231DEFHEADING() 2232 2233DEFHEADING(Debug/Expert options:) 2234 2235STEXI 2236@table @option 2237ETEXI 2238 2239DEF("serial", HAS_ARG, QEMU_OPTION_serial, \ 2240 "-serial dev redirect the serial port to char device 'dev'\n", 2241 QEMU_ARCH_ALL) 2242STEXI 2243@item -serial @var{dev} 2244@findex -serial 2245Redirect the virtual serial port to host character device 2246@var{dev}. The default device is @code{vc} in graphical mode and 2247@code{stdio} in non graphical mode. 2248 2249This option can be used several times to simulate up to 4 serial 2250ports. 2251 2252Use @code{-serial none} to disable all serial ports. 2253 2254Available character devices are: 2255@table @option 2256@item vc[:@var{W}x@var{H}] 2257Virtual console. Optionally, a width and height can be given in pixel with 2258@example 2259vc:800x600 2260@end example 2261It is also possible to specify width or height in characters: 2262@example 2263vc:80Cx24C 2264@end example 2265@item pty 2266[Linux only] Pseudo TTY (a new PTY is automatically allocated) 2267@item none 2268No device is allocated. 2269@item null 2270void device 2271@item /dev/XXX 2272[Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port 2273parameters are set according to the emulated ones. 2274@item /dev/parport@var{N} 2275[Linux only, parallel port only] Use host parallel port 2276@var{N}. Currently SPP and EPP parallel port features can be used. 2277@item file:@var{filename} 2278Write output to @var{filename}. No character can be read. 2279@item stdio 2280[Unix only] standard input/output 2281@item pipe:@var{filename} 2282name pipe @var{filename} 2283@item COM@var{n} 2284[Windows only] Use host serial port @var{n} 2285@item udp:[@var{remote_host}]:@var{remote_port}[@@[@var{src_ip}]:@var{src_port}] 2286This implements UDP Net Console. 2287When @var{remote_host} or @var{src_ip} are not specified 2288they default to @code{0.0.0.0}. 2289When not using a specified @var{src_port} a random port is automatically chosen. 2290 2291If you just want a simple readonly console you can use @code{netcat} or 2292@code{nc}, by starting QEMU with: @code{-serial udp::4555} and nc as: 2293@code{nc -u -l -p 4555}. Any time QEMU writes something to that port it 2294will appear in the netconsole session. 2295 2296If you plan to send characters back via netconsole or you want to stop 2297and start QEMU a lot of times, you should have QEMU use the same 2298source port each time by using something like @code{-serial 2299udp::4555@@:4556} to QEMU. Another approach is to use a patched 2300version of netcat which can listen to a TCP port and send and receive 2301characters via udp. If you have a patched version of netcat which 2302activates telnet remote echo and single char transfer, then you can 2303use the following options to step up a netcat redirector to allow 2304telnet on port 5555 to access the QEMU port. 2305@table @code 2306@item QEMU Options: 2307-serial udp::4555@@:4556 2308@item netcat options: 2309-u -P 4555 -L 0.0.0.0:4556 -t -p 5555 -I -T 2310@item telnet options: 2311localhost 5555 2312@end table 2313 2314@item tcp:[@var{host}]:@var{port}[,@var{server}][,nowait][,nodelay] 2315The TCP Net Console has two modes of operation. It can send the serial 2316I/O to a location or wait for a connection from a location. By default 2317the TCP Net Console is sent to @var{host} at the @var{port}. If you use 2318the @var{server} option QEMU will wait for a client socket application 2319to connect to the port before continuing, unless the @code{nowait} 2320option was specified. The @code{nodelay} option disables the Nagle buffering 2321algorithm. If @var{host} is omitted, 0.0.0.0 is assumed. Only 2322one TCP connection at a time is accepted. You can use @code{telnet} to 2323connect to the corresponding character device. 2324@table @code 2325@item Example to send tcp console to 192.168.0.2 port 4444 2326-serial tcp:192.168.0.2:4444 2327@item Example to listen and wait on port 4444 for connection 2328-serial tcp::4444,server 2329@item Example to not wait and listen on ip 192.168.0.100 port 4444 2330-serial tcp:192.168.0.100:4444,server,nowait 2331@end table 2332 2333@item telnet:@var{host}:@var{port}[,server][,nowait][,nodelay] 2334The telnet protocol is used instead of raw tcp sockets. The options 2335work the same as if you had specified @code{-serial tcp}. The 2336difference is that the port acts like a telnet server or client using 2337telnet option negotiation. This will also allow you to send the 2338MAGIC_SYSRQ sequence if you use a telnet that supports sending the break 2339sequence. Typically in unix telnet you do it with Control-] and then 2340type "send break" followed by pressing the enter key. 2341 2342@item unix:@var{path}[,server][,nowait] 2343A unix domain socket is used instead of a tcp socket. The option works the 2344same as if you had specified @code{-serial tcp} except the unix domain socket 2345@var{path} is used for connections. 2346 2347@item mon:@var{dev_string} 2348This is a special option to allow the monitor to be multiplexed onto 2349another serial port. The monitor is accessed with key sequence of 2350@key{Control-a} and then pressing @key{c}. See monitor access 2351@ref{pcsys_keys} in the -nographic section for more keys. 2352@var{dev_string} should be any one of the serial devices specified 2353above. An example to multiplex the monitor onto a telnet server 2354listening on port 4444 would be: 2355@table @code 2356@item -serial mon:telnet::4444,server,nowait 2357@end table 2358 2359@item braille 2360Braille device. This will use BrlAPI to display the braille output on a real 2361or fake device. 2362 2363@item msmouse 2364Three button serial mouse. Configure the guest to use Microsoft protocol. 2365@end table 2366ETEXI 2367 2368DEF("parallel", HAS_ARG, QEMU_OPTION_parallel, \ 2369 "-parallel dev redirect the parallel port to char device 'dev'\n", 2370 QEMU_ARCH_ALL) 2371STEXI 2372@item -parallel @var{dev} 2373@findex -parallel 2374Redirect the virtual parallel port to host device @var{dev} (same 2375devices as the serial port). On Linux hosts, @file{/dev/parportN} can 2376be used to use hardware devices connected on the corresponding host 2377parallel port. 2378 2379This option can be used several times to simulate up to 3 parallel 2380ports. 2381 2382Use @code{-parallel none} to disable all parallel ports. 2383ETEXI 2384 2385DEF("monitor", HAS_ARG, QEMU_OPTION_monitor, \ 2386 "-monitor dev redirect the monitor to char device 'dev'\n", 2387 QEMU_ARCH_ALL) 2388STEXI 2389@item -monitor @var{dev} 2390@findex -monitor 2391Redirect the monitor to host device @var{dev} (same devices as the 2392serial port). 2393The default device is @code{vc} in graphical mode and @code{stdio} in 2394non graphical mode. 2395ETEXI 2396DEF("qmp", HAS_ARG, QEMU_OPTION_qmp, \ 2397 "-qmp dev like -monitor but opens in 'control' mode\n", 2398 QEMU_ARCH_ALL) 2399STEXI 2400@item -qmp @var{dev} 2401@findex -qmp 2402Like -monitor but opens in 'control' mode. 2403ETEXI 2404 2405DEF("mon", HAS_ARG, QEMU_OPTION_mon, \ 2406 "-mon chardev=[name][,mode=readline|control][,default]\n", QEMU_ARCH_ALL) 2407STEXI 2408@item -mon chardev=[name][,mode=readline|control][,default] 2409@findex -mon 2410Setup monitor on chardev @var{name}. 2411ETEXI 2412 2413DEF("debugcon", HAS_ARG, QEMU_OPTION_debugcon, \ 2414 "-debugcon dev redirect the debug console to char device 'dev'\n", 2415 QEMU_ARCH_ALL) 2416STEXI 2417@item -debugcon @var{dev} 2418@findex -debugcon 2419Redirect the debug console to host device @var{dev} (same devices as the 2420serial port). The debug console is an I/O port which is typically port 24210xe9; writing to that I/O port sends output to this device. 2422The default device is @code{vc} in graphical mode and @code{stdio} in 2423non graphical mode. 2424ETEXI 2425 2426DEF("pidfile", HAS_ARG, QEMU_OPTION_pidfile, \ 2427 "-pidfile file write PID to 'file'\n", QEMU_ARCH_ALL) 2428STEXI 2429@item -pidfile @var{file} 2430@findex -pidfile 2431Store the QEMU process PID in @var{file}. It is useful if you launch QEMU 2432from a script. 2433ETEXI 2434 2435DEF("singlestep", 0, QEMU_OPTION_singlestep, \ 2436 "-singlestep always run in singlestep mode\n", QEMU_ARCH_ALL) 2437STEXI 2438@item -singlestep 2439@findex -singlestep 2440Run the emulation in single step mode. 2441ETEXI 2442 2443DEF("S", 0, QEMU_OPTION_S, \ 2444 "-S freeze CPU at startup (use 'c' to start execution)\n", 2445 QEMU_ARCH_ALL) 2446STEXI 2447@item -S 2448@findex -S 2449Do not start CPU at startup (you must type 'c' in the monitor). 2450ETEXI 2451 2452DEF("gdb", HAS_ARG, QEMU_OPTION_gdb, \ 2453 "-gdb dev wait for gdb connection on 'dev'\n", QEMU_ARCH_ALL) 2454STEXI 2455@item -gdb @var{dev} 2456@findex -gdb 2457Wait for gdb connection on device @var{dev} (@pxref{gdb_usage}). Typical 2458connections will likely be TCP-based, but also UDP, pseudo TTY, or even 2459stdio are reasonable use case. The latter is allowing to start QEMU from 2460within gdb and establish the connection via a pipe: 2461@example 2462(gdb) target remote | exec qemu-system-i386 -gdb stdio ... 2463@end example 2464ETEXI 2465 2466DEF("s", 0, QEMU_OPTION_s, \ 2467 "-s shorthand for -gdb tcp::" DEFAULT_GDBSTUB_PORT "\n", 2468 QEMU_ARCH_ALL) 2469STEXI 2470@item -s 2471@findex -s 2472Shorthand for -gdb tcp::1234, i.e. open a gdbserver on TCP port 1234 2473(@pxref{gdb_usage}). 2474ETEXI 2475 2476DEF("d", HAS_ARG, QEMU_OPTION_d, \ 2477 "-d item1,... output log to /tmp/qemu.log (use '-d help' for a list of log items)\n", 2478 QEMU_ARCH_ALL) 2479STEXI 2480@item -d 2481@findex -d 2482Output log in /tmp/qemu.log 2483ETEXI 2484 2485DEF("D", HAS_ARG, QEMU_OPTION_D, \ 2486 "-D logfile output log to logfile (instead of the default /tmp/qemu.log)\n", 2487 QEMU_ARCH_ALL) 2488STEXI 2489@item -D @var{logfile} 2490@findex -D 2491Output log in @var{logfile} instead of /tmp/qemu.log 2492ETEXI 2493 2494DEF("hdachs", HAS_ARG, QEMU_OPTION_hdachs, \ 2495 "-hdachs c,h,s[,t]\n" \ 2496 " force hard disk 0 physical geometry and the optional BIOS\n" \ 2497 " translation (t=none or lba) (usually QEMU can guess them)\n", 2498 QEMU_ARCH_ALL) 2499STEXI 2500@item -hdachs @var{c},@var{h},@var{s},[,@var{t}] 2501@findex -hdachs 2502Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <= 2503@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS 2504translation mode (@var{t}=none, lba or auto). Usually QEMU can guess 2505all those parameters. This option is useful for old MS-DOS disk 2506images. 2507ETEXI 2508 2509DEF("L", HAS_ARG, QEMU_OPTION_L, \ 2510 "-L path set the directory for the BIOS, VGA BIOS and keymaps\n", 2511 QEMU_ARCH_ALL) 2512STEXI 2513@item -L @var{path} 2514@findex -L 2515Set the directory for the BIOS, VGA BIOS and keymaps. 2516ETEXI 2517 2518DEF("bios", HAS_ARG, QEMU_OPTION_bios, \ 2519 "-bios file set the filename for the BIOS\n", QEMU_ARCH_ALL) 2520STEXI 2521@item -bios @var{file} 2522@findex -bios 2523Set the filename for the BIOS. 2524ETEXI 2525 2526DEF("enable-kvm", 0, QEMU_OPTION_enable_kvm, \ 2527 "-enable-kvm enable KVM full virtualization support\n", QEMU_ARCH_ALL) 2528STEXI 2529@item -enable-kvm 2530@findex -enable-kvm 2531Enable KVM full virtualization support. This option is only available 2532if KVM support is enabled when compiling. 2533ETEXI 2534 2535DEF("xen-domid", HAS_ARG, QEMU_OPTION_xen_domid, 2536 "-xen-domid id specify xen guest domain id\n", QEMU_ARCH_ALL) 2537DEF("xen-create", 0, QEMU_OPTION_xen_create, 2538 "-xen-create create domain using xen hypercalls, bypassing xend\n" 2539 " warning: should not be used when xend is in use\n", 2540 QEMU_ARCH_ALL) 2541DEF("xen-attach", 0, QEMU_OPTION_xen_attach, 2542 "-xen-attach attach to existing xen domain\n" 2543 " xend will use this when starting QEMU\n", 2544 QEMU_ARCH_ALL) 2545STEXI 2546@item -xen-domid @var{id} 2547@findex -xen-domid 2548Specify xen guest domain @var{id} (XEN only). 2549@item -xen-create 2550@findex -xen-create 2551Create domain using xen hypercalls, bypassing xend. 2552Warning: should not be used when xend is in use (XEN only). 2553@item -xen-attach 2554@findex -xen-attach 2555Attach to existing xen domain. 2556xend will use this when starting QEMU (XEN only). 2557ETEXI 2558 2559DEF("no-reboot", 0, QEMU_OPTION_no_reboot, \ 2560 "-no-reboot exit instead of rebooting\n", QEMU_ARCH_ALL) 2561STEXI 2562@item -no-reboot 2563@findex -no-reboot 2564Exit instead of rebooting. 2565ETEXI 2566 2567DEF("no-shutdown", 0, QEMU_OPTION_no_shutdown, \ 2568 "-no-shutdown stop before shutdown\n", QEMU_ARCH_ALL) 2569STEXI 2570@item -no-shutdown 2571@findex -no-shutdown 2572Don't exit QEMU on guest shutdown, but instead only stop the emulation. 2573This allows for instance switching to monitor to commit changes to the 2574disk image. 2575ETEXI 2576 2577DEF("loadvm", HAS_ARG, QEMU_OPTION_loadvm, \ 2578 "-loadvm [tag|id]\n" \ 2579 " start right away with a saved state (loadvm in monitor)\n", 2580 QEMU_ARCH_ALL) 2581STEXI 2582@item -loadvm @var{file} 2583@findex -loadvm 2584Start right away with a saved state (@code{loadvm} in monitor) 2585ETEXI 2586 2587#ifndef _WIN32 2588DEF("daemonize", 0, QEMU_OPTION_daemonize, \ 2589 "-daemonize daemonize QEMU after initializing\n", QEMU_ARCH_ALL) 2590#endif 2591STEXI 2592@item -daemonize 2593@findex -daemonize 2594Daemonize the QEMU process after initialization. QEMU will not detach from 2595standard IO until it is ready to receive connections on any of its devices. 2596This option is a useful way for external programs to launch QEMU without having 2597to cope with initialization race conditions. 2598ETEXI 2599 2600DEF("option-rom", HAS_ARG, QEMU_OPTION_option_rom, \ 2601 "-option-rom rom load a file, rom, into the option ROM space\n", 2602 QEMU_ARCH_ALL) 2603STEXI 2604@item -option-rom @var{file} 2605@findex -option-rom 2606Load the contents of @var{file} as an option ROM. 2607This option is useful to load things like EtherBoot. 2608ETEXI 2609 2610DEF("clock", HAS_ARG, QEMU_OPTION_clock, \ 2611 "-clock force the use of the given methods for timer alarm.\n" \ 2612 " To see what timers are available use '-clock help'\n", 2613 QEMU_ARCH_ALL) 2614STEXI 2615@item -clock @var{method} 2616@findex -clock 2617Force the use of the given methods for timer alarm. To see what timers 2618are available use @code{-clock help}. 2619ETEXI 2620 2621HXCOMM Options deprecated by -rtc 2622DEF("localtime", 0, QEMU_OPTION_localtime, "", QEMU_ARCH_ALL) 2623DEF("startdate", HAS_ARG, QEMU_OPTION_startdate, "", QEMU_ARCH_ALL) 2624 2625DEF("rtc", HAS_ARG, QEMU_OPTION_rtc, \ 2626 "-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew]\n" \ 2627 " set the RTC base and clock, enable drift fix for clock ticks (x86 only)\n", 2628 QEMU_ARCH_ALL) 2629 2630STEXI 2631 2632@item -rtc [base=utc|localtime|@var{date}][,clock=host|vm][,driftfix=none|slew] 2633@findex -rtc 2634Specify @option{base} as @code{utc} or @code{localtime} to let the RTC start at the current 2635UTC or local time, respectively. @code{localtime} is required for correct date in 2636MS-DOS or Windows. To start at a specific point in time, provide @var{date} in the 2637format @code{2006-06-17T16:01:21} or @code{2006-06-17}. The default base is UTC. 2638 2639By default the RTC is driven by the host system time. This allows to use the 2640RTC as accurate reference clock inside the guest, specifically if the host 2641time is smoothly following an accurate external reference clock, e.g. via NTP. 2642If you want to isolate the guest time from the host, you can set @option{clock} 2643to @code{rt} instead. To even prevent it from progressing during suspension, 2644you can set it to @code{vm}. 2645 2646Enable @option{driftfix} (i386 targets only) if you experience time drift problems, 2647specifically with Windows' ACPI HAL. This option will try to figure out how 2648many timer interrupts were not processed by the Windows guest and will 2649re-inject them. 2650ETEXI 2651 2652DEF("icount", HAS_ARG, QEMU_OPTION_icount, \ 2653 "-icount [N|auto]\n" \ 2654 " enable virtual instruction counter with 2^N clock ticks per\n" \ 2655 " instruction\n", QEMU_ARCH_ALL) 2656STEXI 2657@item -icount [@var{N}|auto] 2658@findex -icount 2659Enable virtual instruction counter. The virtual cpu will execute one 2660instruction every 2^@var{N} ns of virtual time. If @code{auto} is specified 2661then the virtual cpu speed will be automatically adjusted to keep virtual 2662time within a few seconds of real time. 2663 2664Note that while this option can give deterministic behavior, it does not 2665provide cycle accurate emulation. Modern CPUs contain superscalar out of 2666order cores with complex cache hierarchies. The number of instructions 2667executed often has little or no correlation with actual performance. 2668ETEXI 2669 2670DEF("watchdog", HAS_ARG, QEMU_OPTION_watchdog, \ 2671 "-watchdog i6300esb|ib700\n" \ 2672 " enable virtual hardware watchdog [default=none]\n", 2673 QEMU_ARCH_ALL) 2674STEXI 2675@item -watchdog @var{model} 2676@findex -watchdog 2677Create a virtual hardware watchdog device. Once enabled (by a guest 2678action), the watchdog must be periodically polled by an agent inside 2679the guest or else the guest will be restarted. 2680 2681The @var{model} is the model of hardware watchdog to emulate. Choices 2682for model are: @code{ib700} (iBASE 700) which is a very simple ISA 2683watchdog with a single timer, or @code{i6300esb} (Intel 6300ESB I/O 2684controller hub) which is a much more featureful PCI-based dual-timer 2685watchdog. Choose a model for which your guest has drivers. 2686 2687Use @code{-watchdog help} to list available hardware models. Only one 2688watchdog can be enabled for a guest. 2689ETEXI 2690 2691DEF("watchdog-action", HAS_ARG, QEMU_OPTION_watchdog_action, \ 2692 "-watchdog-action reset|shutdown|poweroff|pause|debug|none\n" \ 2693 " action when watchdog fires [default=reset]\n", 2694 QEMU_ARCH_ALL) 2695STEXI 2696@item -watchdog-action @var{action} 2697 2698The @var{action} controls what QEMU will do when the watchdog timer 2699expires. 2700The default is 2701@code{reset} (forcefully reset the guest). 2702Other possible actions are: 2703@code{shutdown} (attempt to gracefully shutdown the guest), 2704@code{poweroff} (forcefully poweroff the guest), 2705@code{pause} (pause the guest), 2706@code{debug} (print a debug message and continue), or 2707@code{none} (do nothing). 2708 2709Note that the @code{shutdown} action requires that the guest responds 2710to ACPI signals, which it may not be able to do in the sort of 2711situations where the watchdog would have expired, and thus 2712@code{-watchdog-action shutdown} is not recommended for production use. 2713 2714Examples: 2715 2716@table @code 2717@item -watchdog i6300esb -watchdog-action pause 2718@item -watchdog ib700 2719@end table 2720ETEXI 2721 2722DEF("echr", HAS_ARG, QEMU_OPTION_echr, \ 2723 "-echr chr set terminal escape character instead of ctrl-a\n", 2724 QEMU_ARCH_ALL) 2725STEXI 2726 2727@item -echr @var{numeric_ascii_value} 2728@findex -echr 2729Change the escape character used for switching to the monitor when using 2730monitor and serial sharing. The default is @code{0x01} when using the 2731@code{-nographic} option. @code{0x01} is equal to pressing 2732@code{Control-a}. You can select a different character from the ascii 2733control keys where 1 through 26 map to Control-a through Control-z. For 2734instance you could use the either of the following to change the escape 2735character to Control-t. 2736@table @code 2737@item -echr 0x14 2738@item -echr 20 2739@end table 2740ETEXI 2741 2742DEF("virtioconsole", HAS_ARG, QEMU_OPTION_virtiocon, \ 2743 "-virtioconsole c\n" \ 2744 " set virtio console\n", QEMU_ARCH_ALL) 2745STEXI 2746@item -virtioconsole @var{c} 2747@findex -virtioconsole 2748Set virtio console. 2749 2750This option is maintained for backward compatibility. 2751 2752Please use @code{-device virtconsole} for the new way of invocation. 2753ETEXI 2754 2755DEF("show-cursor", 0, QEMU_OPTION_show_cursor, \ 2756 "-show-cursor show cursor\n", QEMU_ARCH_ALL) 2757STEXI 2758@item -show-cursor 2759@findex -show-cursor 2760Show cursor. 2761ETEXI 2762 2763DEF("tb-size", HAS_ARG, QEMU_OPTION_tb_size, \ 2764 "-tb-size n set TB size\n", QEMU_ARCH_ALL) 2765STEXI 2766@item -tb-size @var{n} 2767@findex -tb-size 2768Set TB size. 2769ETEXI 2770 2771DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \ 2772 "-incoming p prepare for incoming migration, listen on port p\n", 2773 QEMU_ARCH_ALL) 2774STEXI 2775@item -incoming @var{port} 2776@findex -incoming 2777Prepare for incoming migration, listen on @var{port}. 2778ETEXI 2779 2780DEF("nodefaults", 0, QEMU_OPTION_nodefaults, \ 2781 "-nodefaults don't create default devices\n", QEMU_ARCH_ALL) 2782STEXI 2783@item -nodefaults 2784@findex -nodefaults 2785Don't create default devices. Normally, QEMU sets the default devices like serial 2786port, parallel port, virtual console, monitor device, VGA adapter, floppy and 2787CD-ROM drive and others. The @code{-nodefaults} option will disable all those 2788default devices. 2789ETEXI 2790 2791#ifndef _WIN32 2792DEF("chroot", HAS_ARG, QEMU_OPTION_chroot, \ 2793 "-chroot dir chroot to dir just before starting the VM\n", 2794 QEMU_ARCH_ALL) 2795#endif 2796STEXI 2797@item -chroot @var{dir} 2798@findex -chroot 2799Immediately before starting guest execution, chroot to the specified 2800directory. Especially useful in combination with -runas. 2801ETEXI 2802 2803#ifndef _WIN32 2804DEF("runas", HAS_ARG, QEMU_OPTION_runas, \ 2805 "-runas user change to user id user just before starting the VM\n", 2806 QEMU_ARCH_ALL) 2807#endif 2808STEXI 2809@item -runas @var{user} 2810@findex -runas 2811Immediately before starting guest execution, drop root privileges, switching 2812to the specified user. 2813ETEXI 2814 2815DEF("prom-env", HAS_ARG, QEMU_OPTION_prom_env, 2816 "-prom-env variable=value\n" 2817 " set OpenBIOS nvram variables\n", 2818 QEMU_ARCH_PPC | QEMU_ARCH_SPARC) 2819STEXI 2820@item -prom-env @var{variable}=@var{value} 2821@findex -prom-env 2822Set OpenBIOS nvram @var{variable} to given @var{value} (PPC, SPARC only). 2823ETEXI 2824DEF("semihosting", 0, QEMU_OPTION_semihosting, 2825 "-semihosting semihosting mode\n", QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA) 2826STEXI 2827@item -semihosting 2828@findex -semihosting 2829Semihosting mode (ARM, M68K, Xtensa only). 2830ETEXI 2831DEF("old-param", 0, QEMU_OPTION_old_param, 2832 "-old-param old param mode\n", QEMU_ARCH_ARM) 2833STEXI 2834@item -old-param 2835@findex -old-param (ARM) 2836Old param mode (ARM only). 2837ETEXI 2838 2839DEF("sandbox", HAS_ARG, QEMU_OPTION_sandbox, \ 2840 "-sandbox <arg> Enable seccomp mode 2 system call filter (default 'off').\n", 2841 QEMU_ARCH_ALL) 2842STEXI 2843@item -sandbox 2844@findex -sandbox 2845Enable Seccomp mode 2 system call filter. 'on' will enable syscall filtering and 'off' will 2846disable it. The default is 'off'. 2847ETEXI 2848 2849DEF("readconfig", HAS_ARG, QEMU_OPTION_readconfig, 2850 "-readconfig <file>\n", QEMU_ARCH_ALL) 2851STEXI 2852@item -readconfig @var{file} 2853@findex -readconfig 2854Read device configuration from @var{file}. This approach is useful when you want to spawn 2855QEMU process with many command line options but you don't want to exceed the command line 2856character limit. 2857ETEXI 2858DEF("writeconfig", HAS_ARG, QEMU_OPTION_writeconfig, 2859 "-writeconfig <file>\n" 2860 " read/write config file\n", QEMU_ARCH_ALL) 2861STEXI 2862@item -writeconfig @var{file} 2863@findex -writeconfig 2864Write device configuration to @var{file}. The @var{file} can be either filename to save 2865command line and device configuration into file or dash @code{-}) character to print the 2866output to stdout. This can be later used as input file for @code{-readconfig} option. 2867ETEXI 2868DEF("nodefconfig", 0, QEMU_OPTION_nodefconfig, 2869 "-nodefconfig\n" 2870 " do not load default config files at startup\n", 2871 QEMU_ARCH_ALL) 2872STEXI 2873@item -nodefconfig 2874@findex -nodefconfig 2875Normally QEMU loads configuration files from @var{sysconfdir} and @var{datadir} at startup. 2876The @code{-nodefconfig} option will prevent QEMU from loading any of those config files. 2877ETEXI 2878DEF("no-user-config", 0, QEMU_OPTION_nouserconfig, 2879 "-no-user-config\n" 2880 " do not load user-provided config files at startup\n", 2881 QEMU_ARCH_ALL) 2882STEXI 2883@item -no-user-config 2884@findex -no-user-config 2885The @code{-no-user-config} option makes QEMU not load any of the user-provided 2886config files on @var{sysconfdir}, but won't make it skip the QEMU-provided config 2887files from @var{datadir}. 2888ETEXI 2889DEF("trace", HAS_ARG, QEMU_OPTION_trace, 2890 "-trace [events=<file>][,file=<file>]\n" 2891 " specify tracing options\n", 2892 QEMU_ARCH_ALL) 2893STEXI 2894HXCOMM This line is not accurate, as some sub-options are backend-specific but 2895HXCOMM HX does not support conditional compilation of text. 2896@item -trace [events=@var{file}][,file=@var{file}] 2897@findex -trace 2898 2899Specify tracing options. 2900 2901@table @option 2902@item events=@var{file} 2903Immediately enable events listed in @var{file}. 2904The file must contain one event name (as listed in the @var{trace-events} file) 2905per line. 2906This option is only available if QEMU has been compiled with 2907either @var{simple} or @var{stderr} tracing backend. 2908@item file=@var{file} 2909Log output traces to @var{file}. 2910 2911This option is only available if QEMU has been compiled with 2912the @var{simple} tracing backend. 2913@end table 2914ETEXI 2915 2916DEF("qtest", HAS_ARG, QEMU_OPTION_qtest, 2917 "-qtest CHR specify tracing options\n", 2918 QEMU_ARCH_ALL) 2919 2920DEF("qtest-log", HAS_ARG, QEMU_OPTION_qtest_log, 2921 "-qtest-log LOG specify tracing options\n", 2922 QEMU_ARCH_ALL) 2923 2924#ifdef __linux__ 2925DEF("enable-fips", 0, QEMU_OPTION_enablefips, 2926 "-enable-fips enable FIPS 140-2 compliance\n", 2927 QEMU_ARCH_ALL) 2928#endif 2929STEXI 2930@item -enable-fips 2931@findex -enable-fips 2932Enable FIPS 140-2 compliance mode. 2933ETEXI 2934 2935HXCOMM Deprecated by -machine accel=tcg property 2936DEF("no-kvm", 0, QEMU_OPTION_no_kvm, "", QEMU_ARCH_I386) 2937 2938HXCOMM Deprecated by kvm-pit driver properties 2939DEF("no-kvm-pit-reinjection", 0, QEMU_OPTION_no_kvm_pit_reinjection, 2940 "", QEMU_ARCH_I386) 2941 2942HXCOMM Deprecated (ignored) 2943DEF("no-kvm-pit", 0, QEMU_OPTION_no_kvm_pit, "", QEMU_ARCH_I386) 2944 2945HXCOMM Deprecated by -machine kernel_irqchip=on|off property 2946DEF("no-kvm-irqchip", 0, QEMU_OPTION_no_kvm_irqchip, "", QEMU_ARCH_I386) 2947 2948HXCOMM Deprecated (ignored) 2949DEF("tdf", 0, QEMU_OPTION_tdf,"", QEMU_ARCH_ALL) 2950 2951DEF("object", HAS_ARG, QEMU_OPTION_object, 2952 "-object TYPENAME[,PROP1=VALUE1,...]\n" 2953 " create an new object of type TYPENAME setting properties\n" 2954 " in the order they are specified. Note that the 'id'\n" 2955 " property must be set. These objects are placed in the\n" 2956 " '/objects' path.\n", 2957 QEMU_ARCH_ALL) 2958 2959HXCOMM This is the last statement. Insert new options before this line! 2960STEXI 2961@end table 2962ETEXI 2963
