1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Remote desktop 7## 8 9{ 'include': 'common.json' } 10{ 'include': 'sockets.json' } 11 12## 13# @DisplayProtocol: 14# 15# Display protocols which support changing password options. 16# 17# Since: 7.0 18## 19{ 'enum': 'DisplayProtocol', 20 'data': [ 'vnc', 'spice' ] } 21 22## 23# @SetPasswordAction: 24# 25# An action to take on changing a password on a connection with active 26# clients. 27# 28# @keep: maintain existing clients 29# 30# @fail: fail the command if clients are connected 31# 32# @disconnect: disconnect existing clients 33# 34# Since: 7.0 35## 36{ 'enum': 'SetPasswordAction', 37 'data': [ 'keep', 'fail', 'disconnect' ] } 38 39## 40# @SetPasswordOptions: 41# 42# Options for set_password. 43# 44# @protocol: 45# - 'vnc' to modify the VNC server password 46# - 'spice' to modify the Spice server password 47# 48# @password: the new password 49# 50# @connected: How to handle existing clients when changing the 51# password. If nothing is specified, defaults to 'keep'. For VNC, 52# only 'keep' is currently implemented. 53# 54# Since: 7.0 55## 56{ 'union': 'SetPasswordOptions', 57 'base': { 'protocol': 'DisplayProtocol', 58 'password': 'str', 59 '*connected': 'SetPasswordAction' }, 60 'discriminator': 'protocol', 61 'data': { 'vnc': 'SetPasswordOptionsVnc' } } 62 63## 64# @SetPasswordOptionsVnc: 65# 66# Options for set_password specific to the VNC protocol. 67# 68# @display: The id of the display where the password should be 69# changed. Defaults to the first. 70# 71# Since: 7.0 72## 73{ 'struct': 'SetPasswordOptionsVnc', 74 'data': { '*display': 'str' } } 75 76## 77# @set_password: 78# 79# Set the password of a remote display server. 80# 81# Errors: 82# - If Spice is not enabled, DeviceNotFound 83# 84# Since: 0.14 85# 86# Example: 87# 88# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 89# "password": "secret" } } 90# <- { "return": {} } 91## 92{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' } 93 94## 95# @ExpirePasswordOptions: 96# 97# General options for expire_password. 98# 99# @protocol: 100# - 'vnc' to modify the VNC server expiration 101# - 'spice' to modify the Spice server expiration 102# 103# @time: when to expire the password. 104# 105# - 'now' to expire the password immediately 106# - 'never' to cancel password expiration 107# - '+INT' where INT is the number of seconds from now (integer) 108# - 'INT' where INT is the absolute time in seconds 109# 110# Notes: Time is relative to the server and currently there is no way 111# to coordinate server time with client time. It is not 112# recommended to use the absolute time version of the @time 113# parameter unless you're sure you are on the same machine as the 114# QEMU instance. 115# 116# Since: 7.0 117## 118{ 'union': 'ExpirePasswordOptions', 119 'base': { 'protocol': 'DisplayProtocol', 120 'time': 'str' }, 121 'discriminator': 'protocol', 122 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } } 123 124## 125# @ExpirePasswordOptionsVnc: 126# 127# Options for expire_password specific to the VNC protocol. 128# 129# @display: The id of the display where the expiration should be 130# changed. Defaults to the first. 131# 132# Since: 7.0 133## 134{ 'struct': 'ExpirePasswordOptionsVnc', 135 'data': { '*display': 'str' } } 136 137## 138# @expire_password: 139# 140# Expire the password of a remote display server. 141# 142# Errors: 143# - If @protocol is 'spice' and Spice is not active, 144# DeviceNotFound 145# 146# Since: 0.14 147# 148# Example: 149# 150# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 151# "time": "+60" } } 152# <- { "return": {} } 153## 154{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' } 155 156## 157# @ImageFormat: 158# 159# Supported image format types. 160# 161# @png: PNG format 162# 163# @ppm: PPM format 164# 165# Since: 7.1 166## 167{ 'enum': 'ImageFormat', 168 'data': ['ppm', 'png'] } 169 170## 171# @screendump: 172# 173# Capture the contents of a screen and write it to a file. 174# 175# @filename: the path of a new file to store the image 176# 177# @device: ID of the display device that should be dumped. If this 178# parameter is missing, the primary display will be used. (Since 179# 2.12) 180# 181# @head: head to use in case the device supports multiple heads. If 182# this parameter is missing, head #0 will be used. Also note that 183# the head can only be specified in conjunction with the device 184# ID. (Since 2.12) 185# 186# @format: image format for screendump. (default: ppm) (Since 7.1) 187# 188# Since: 0.14 189# 190# Example: 191# 192# -> { "execute": "screendump", 193# "arguments": { "filename": "/tmp/image" } } 194# <- { "return": {} } 195## 196{ 'command': 'screendump', 197 'data': {'filename': 'str', '*device': 'str', '*head': 'int', 198 '*format': 'ImageFormat'}, 199 'coroutine': true, 200 'if': 'CONFIG_PIXMAN' } 201 202## 203# == Spice 204## 205 206## 207# @SpiceBasicInfo: 208# 209# The basic information for SPICE network connection 210# 211# @host: IP address 212# 213# @port: port number 214# 215# @family: address family 216# 217# Since: 2.1 218## 219{ 'struct': 'SpiceBasicInfo', 220 'data': { 'host': 'str', 221 'port': 'str', 222 'family': 'NetworkAddressFamily' }, 223 'if': 'CONFIG_SPICE' } 224 225## 226# @SpiceServerInfo: 227# 228# Information about a SPICE server 229# 230# @auth: authentication method 231# 232# Since: 2.1 233## 234{ 'struct': 'SpiceServerInfo', 235 'base': 'SpiceBasicInfo', 236 'data': { '*auth': 'str' }, 237 'if': 'CONFIG_SPICE' } 238 239## 240# @SpiceChannel: 241# 242# Information about a SPICE client channel. 243# 244# @connection-id: SPICE connection id number. All channels with the 245# same id belong to the same SPICE session. 246# 247# @channel-type: SPICE channel type number. "1" is the main control 248# channel, filter for this one if you want to track spice sessions 249# only 250# 251# @channel-id: SPICE channel ID number. Usually "0", might be 252# different when multiple channels of the same type exist, such as 253# multiple display channels in a multihead setup 254# 255# @tls: true if the channel is encrypted, false otherwise. 256# 257# Since: 0.14 258## 259{ 'struct': 'SpiceChannel', 260 'base': 'SpiceBasicInfo', 261 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 262 'tls': 'bool'}, 263 'if': 'CONFIG_SPICE' } 264 265## 266# @SpiceQueryMouseMode: 267# 268# An enumeration of Spice mouse states. 269# 270# @client: Mouse cursor position is determined by the client. 271# 272# @server: Mouse cursor position is determined by the server. 273# 274# @unknown: No information is available about mouse mode used by the 275# spice server. 276# 277# Note: spice/enums.h has a SpiceMouseMode already, hence the name. 278# 279# Since: 1.1 280## 281{ 'enum': 'SpiceQueryMouseMode', 282 'data': [ 'client', 'server', 'unknown' ], 283 'if': 'CONFIG_SPICE' } 284 285## 286# @SpiceInfo: 287# 288# Information about the SPICE session. 289# 290# @enabled: true if the SPICE server is enabled, false otherwise 291# 292# @migrated: true if the last guest migration completed and spice 293# migration had completed as well. false otherwise. (since 1.4) 294# 295# @host: The hostname the SPICE server is bound to. This depends on 296# the name resolution on the host and may be an IP address. 297# 298# @port: The SPICE server's port number. 299# 300# @compiled-version: SPICE server version. 301# 302# @tls-port: The SPICE server's TLS port number. 303# 304# @auth: the current authentication type used by the server 305# 306# - 'none' if no authentication is being used 307# - 'spice' uses SASL or direct TLS authentication, depending on 308# command line options 309# 310# @mouse-mode: The mode in which the mouse cursor is displayed 311# currently. Can be determined by the client or the server, or 312# unknown if spice server doesn't provide this information. 313# (since: 1.1) 314# 315# @channels: a list of @SpiceChannel for each active spice channel 316# 317# Since: 0.14 318## 319{ 'struct': 'SpiceInfo', 320 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 321 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 322 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 323 'if': 'CONFIG_SPICE' } 324 325## 326# @query-spice: 327# 328# Returns information about the current SPICE server 329# 330# Returns: @SpiceInfo 331# 332# Since: 0.14 333# 334# Example: 335# 336# -> { "execute": "query-spice" } 337# <- { "return": { 338# "enabled": true, 339# "auth": "spice", 340# "port": 5920, 341# "migrated":false, 342# "tls-port": 5921, 343# "host": "0.0.0.0", 344# "mouse-mode":"client", 345# "channels": [ 346# { 347# "port": "54924", 348# "family": "ipv4", 349# "channel-type": 1, 350# "connection-id": 1804289383, 351# "host": "127.0.0.1", 352# "channel-id": 0, 353# "tls": true 354# }, 355# { 356# "port": "36710", 357# "family": "ipv4", 358# "channel-type": 4, 359# "connection-id": 1804289383, 360# "host": "127.0.0.1", 361# "channel-id": 0, 362# "tls": false 363# }, 364# [ ... more channels follow ... ] 365# ] 366# } 367# } 368## 369{ 'command': 'query-spice', 'returns': 'SpiceInfo', 370 'if': 'CONFIG_SPICE' } 371 372## 373# @SPICE_CONNECTED: 374# 375# Emitted when a SPICE client establishes a connection 376# 377# @server: server information 378# 379# @client: client information 380# 381# Since: 0.14 382# 383# Example: 384# 385# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 386# "event": "SPICE_CONNECTED", 387# "data": { 388# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 389# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 390# }} 391## 392{ 'event': 'SPICE_CONNECTED', 393 'data': { 'server': 'SpiceBasicInfo', 394 'client': 'SpiceBasicInfo' }, 395 'if': 'CONFIG_SPICE' } 396 397## 398# @SPICE_INITIALIZED: 399# 400# Emitted after initial handshake and authentication takes place (if 401# any) and the SPICE channel is up and running 402# 403# @server: server information 404# 405# @client: client information 406# 407# Since: 0.14 408# 409# Example: 410# 411# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 412# "event": "SPICE_INITIALIZED", 413# "data": {"server": {"auth": "spice", "port": "5921", 414# "family": "ipv4", "host": "127.0.0.1"}, 415# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 416# "connection-id": 1804289383, "host": "127.0.0.1", 417# "channel-id": 0, "tls": true} 418# }} 419## 420{ 'event': 'SPICE_INITIALIZED', 421 'data': { 'server': 'SpiceServerInfo', 422 'client': 'SpiceChannel' }, 423 'if': 'CONFIG_SPICE' } 424 425## 426# @SPICE_DISCONNECTED: 427# 428# Emitted when the SPICE connection is closed 429# 430# @server: server information 431# 432# @client: client information 433# 434# Since: 0.14 435# 436# Example: 437# 438# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 439# "event": "SPICE_DISCONNECTED", 440# "data": { 441# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 442# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 443# }} 444## 445{ 'event': 'SPICE_DISCONNECTED', 446 'data': { 'server': 'SpiceBasicInfo', 447 'client': 'SpiceBasicInfo' }, 448 'if': 'CONFIG_SPICE' } 449 450## 451# @SPICE_MIGRATE_COMPLETED: 452# 453# Emitted when SPICE migration has completed 454# 455# Since: 1.3 456# 457# Example: 458# 459# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 460# "event": "SPICE_MIGRATE_COMPLETED" } 461## 462{ 'event': 'SPICE_MIGRATE_COMPLETED', 463 'if': 'CONFIG_SPICE' } 464 465## 466# == VNC 467## 468 469## 470# @VncBasicInfo: 471# 472# The basic information for vnc network connection 473# 474# @host: IP address 475# 476# @service: The service name of the vnc port. This may depend on the 477# host system's service database so symbolic names should not be 478# relied on. 479# 480# @family: address family 481# 482# @websocket: true in case the socket is a websocket (since 2.3). 483# 484# Since: 2.1 485## 486{ 'struct': 'VncBasicInfo', 487 'data': { 'host': 'str', 488 'service': 'str', 489 'family': 'NetworkAddressFamily', 490 'websocket': 'bool' }, 491 'if': 'CONFIG_VNC' } 492 493## 494# @VncServerInfo: 495# 496# The network connection information for server 497# 498# @auth: authentication method used for the plain (non-websocket) VNC 499# server 500# 501# Since: 2.1 502## 503{ 'struct': 'VncServerInfo', 504 'base': 'VncBasicInfo', 505 'data': { '*auth': 'str' }, 506 'if': 'CONFIG_VNC' } 507 508## 509# @VncClientInfo: 510# 511# Information about a connected VNC client. 512# 513# @x509_dname: If x509 authentication is in use, the Distinguished 514# Name of the client. 515# 516# @sasl_username: If SASL authentication is in use, the SASL username 517# used for authentication. 518# 519# Since: 0.14 520## 521{ 'struct': 'VncClientInfo', 522 'base': 'VncBasicInfo', 523 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 524 'if': 'CONFIG_VNC' } 525 526## 527# @VncInfo: 528# 529# Information about the VNC session. 530# 531# @enabled: true if the VNC server is enabled, false otherwise 532# 533# @host: The hostname the VNC server is bound to. This depends on the 534# name resolution on the host and may be an IP address. 535# 536# @family: 537# - 'ipv6' if the host is listening for IPv6 connections 538# - 'ipv4' if the host is listening for IPv4 connections 539# - 'unix' if the host is listening on a unix domain socket 540# - 'unknown' otherwise 541# 542# @service: The service name of the server's port. This may depends 543# on the host system's service database so symbolic names should 544# not be relied on. 545# 546# @auth: the current authentication type used by the server 547# 548# - 'none' if no authentication is being used 549# - 'vnc' if VNC authentication is being used 550# - 'vencrypt+plain' if VEncrypt is used with plain text 551# authentication 552# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no 553# authentication 554# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC 555# authentication 556# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain 557# text auth 558# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 559# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 560# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain 561# text auth 562# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 563# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL 564# auth 565# 566# @clients: a list of @VncClientInfo of all currently connected 567# clients 568# 569# Since: 0.14 570## 571{ 'struct': 'VncInfo', 572 'data': {'enabled': 'bool', '*host': 'str', 573 '*family': 'NetworkAddressFamily', 574 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 575 'if': 'CONFIG_VNC' } 576 577## 578# @VncPrimaryAuth: 579# 580# vnc primary authentication method. 581# 582# Since: 2.3 583## 584{ 'enum': 'VncPrimaryAuth', 585 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 586 'tls', 'vencrypt', 'sasl' ], 587 'if': 'CONFIG_VNC' } 588 589## 590# @VncVencryptSubAuth: 591# 592# vnc sub authentication method with vencrypt. 593# 594# Since: 2.3 595## 596{ 'enum': 'VncVencryptSubAuth', 597 'data': [ 'plain', 598 'tls-none', 'x509-none', 599 'tls-vnc', 'x509-vnc', 600 'tls-plain', 'x509-plain', 601 'tls-sasl', 'x509-sasl' ], 602 'if': 'CONFIG_VNC' } 603 604## 605# @VncServerInfo2: 606# 607# The network connection information for server 608# 609# @auth: The current authentication type used by the servers 610# 611# @vencrypt: The vencrypt sub authentication type used by the servers, 612# only specified in case auth == vencrypt. 613# 614# Since: 2.9 615## 616{ 'struct': 'VncServerInfo2', 617 'base': 'VncBasicInfo', 618 'data': { 'auth' : 'VncPrimaryAuth', 619 '*vencrypt' : 'VncVencryptSubAuth' }, 620 'if': 'CONFIG_VNC' } 621 622## 623# @VncInfo2: 624# 625# Information about a vnc server 626# 627# @id: vnc server name. 628# 629# @server: A list of @VncBasincInfo describing all listening sockets. 630# The list can be empty (in case the vnc server is disabled). It 631# also may have multiple entries: normal + websocket, possibly 632# also ipv4 + ipv6 in the future. 633# 634# @clients: A list of @VncClientInfo of all currently connected 635# clients. The list can be empty, for obvious reasons. 636# 637# @auth: The current authentication type used by the non-websockets 638# servers 639# 640# @vencrypt: The vencrypt authentication type used by the servers, 641# only specified in case auth == vencrypt. 642# 643# @display: The display device the vnc server is linked to. 644# 645# Since: 2.3 646## 647{ 'struct': 'VncInfo2', 648 'data': { 'id' : 'str', 649 'server' : ['VncServerInfo2'], 650 'clients' : ['VncClientInfo'], 651 'auth' : 'VncPrimaryAuth', 652 '*vencrypt' : 'VncVencryptSubAuth', 653 '*display' : 'str' }, 654 'if': 'CONFIG_VNC' } 655 656## 657# @query-vnc: 658# 659# Returns information about the current VNC server 660# 661# Returns: @VncInfo 662# 663# Since: 0.14 664# 665# Example: 666# 667# -> { "execute": "query-vnc" } 668# <- { "return": { 669# "enabled":true, 670# "host":"0.0.0.0", 671# "service":"50402", 672# "auth":"vnc", 673# "family":"ipv4", 674# "clients":[ 675# { 676# "host":"127.0.0.1", 677# "service":"50401", 678# "family":"ipv4", 679# "websocket":false 680# } 681# ] 682# } 683# } 684## 685{ 'command': 'query-vnc', 'returns': 'VncInfo', 686 'if': 'CONFIG_VNC' } 687## 688# @query-vnc-servers: 689# 690# Returns a list of vnc servers. The list can be empty. 691# 692# Returns: a list of @VncInfo2 693# 694# Since: 2.3 695## 696{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 697 'if': 'CONFIG_VNC' } 698 699## 700# @change-vnc-password: 701# 702# Change the VNC server password. 703# 704# @password: the new password to use with VNC authentication 705# 706# Since: 1.1 707# 708# Notes: An empty password in this command will set the password to 709# the empty string. Existing clients are unaffected by executing 710# this command. 711## 712{ 'command': 'change-vnc-password', 713 'data': { 'password': 'str' }, 714 'if': 'CONFIG_VNC' } 715 716## 717# @VNC_CONNECTED: 718# 719# Emitted when a VNC client establishes a connection 720# 721# @server: server information 722# 723# @client: client information 724# 725# Note: This event is emitted before any authentication takes place, 726# thus the authentication ID is not provided 727# 728# Since: 0.13 729# 730# Example: 731# 732# <- { "event": "VNC_CONNECTED", 733# "data": { 734# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 735# "service": "5901", "host": "0.0.0.0" }, 736# "client": { "family": "ipv4", "service": "58425", 737# "host": "127.0.0.1", "websocket": false } }, 738# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 739## 740{ 'event': 'VNC_CONNECTED', 741 'data': { 'server': 'VncServerInfo', 742 'client': 'VncBasicInfo' }, 743 'if': 'CONFIG_VNC' } 744 745## 746# @VNC_INITIALIZED: 747# 748# Emitted after authentication takes place (if any) and the VNC 749# session is made active 750# 751# @server: server information 752# 753# @client: client information 754# 755# Since: 0.13 756# 757# Example: 758# 759# <- { "event": "VNC_INITIALIZED", 760# "data": { 761# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 762# "service": "5901", "host": "0.0.0.0"}, 763# "client": { "family": "ipv4", "service": "46089", "websocket": false, 764# "host": "127.0.0.1", "sasl_username": "luiz" } }, 765# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 766## 767{ 'event': 'VNC_INITIALIZED', 768 'data': { 'server': 'VncServerInfo', 769 'client': 'VncClientInfo' }, 770 'if': 'CONFIG_VNC' } 771 772## 773# @VNC_DISCONNECTED: 774# 775# Emitted when the connection is closed 776# 777# @server: server information 778# 779# @client: client information 780# 781# Since: 0.13 782# 783# Example: 784# 785# <- { "event": "VNC_DISCONNECTED", 786# "data": { 787# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 788# "service": "5901", "host": "0.0.0.0" }, 789# "client": { "family": "ipv4", "service": "58425", "websocket": false, 790# "host": "127.0.0.1", "sasl_username": "luiz" } }, 791# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 792## 793{ 'event': 'VNC_DISCONNECTED', 794 'data': { 'server': 'VncServerInfo', 795 'client': 'VncClientInfo' }, 796 'if': 'CONFIG_VNC' } 797 798## 799# = Input 800## 801 802## 803# @MouseInfo: 804# 805# Information about a mouse device. 806# 807# @name: the name of the mouse device 808# 809# @index: the index of the mouse device 810# 811# @current: true if this device is currently receiving mouse events 812# 813# @absolute: true if this device supports absolute coordinates as 814# input 815# 816# Since: 0.14 817## 818{ 'struct': 'MouseInfo', 819 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 820 'absolute': 'bool'} } 821 822## 823# @query-mice: 824# 825# Returns information about each active mouse device 826# 827# Returns: a list of @MouseInfo for each device 828# 829# Since: 0.14 830# 831# Example: 832# 833# -> { "execute": "query-mice" } 834# <- { "return": [ 835# { 836# "name":"QEMU Microsoft Mouse", 837# "index":0, 838# "current":false, 839# "absolute":false 840# }, 841# { 842# "name":"QEMU PS/2 Mouse", 843# "index":1, 844# "current":true, 845# "absolute":true 846# } 847# ] 848# } 849## 850{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 851 852## 853# @QKeyCode: 854# 855# An enumeration of key name. 856# 857# This is used by the @send-key command. 858# 859# @unmapped: since 2.0 860# 861# @pause: since 2.0 862# 863# @ro: since 2.4 864# 865# @kp_comma: since 2.4 866# 867# @kp_equals: since 2.6 868# 869# @power: since 2.6 870# 871# @hiragana: since 2.9 872# 873# @henkan: since 2.9 874# 875# @yen: since 2.9 876# 877# @sleep: since 2.10 878# 879# @wake: since 2.10 880# 881# @audionext: since 2.10 882# 883# @audioprev: since 2.10 884# 885# @audiostop: since 2.10 886# 887# @audioplay: since 2.10 888# 889# @audiomute: since 2.10 890# 891# @volumeup: since 2.10 892# 893# @volumedown: since 2.10 894# 895# @mediaselect: since 2.10 896# 897# @mail: since 2.10 898# 899# @calculator: since 2.10 900# 901# @computer: since 2.10 902# 903# @ac_home: since 2.10 904# 905# @ac_back: since 2.10 906# 907# @ac_forward: since 2.10 908# 909# @ac_refresh: since 2.10 910# 911# @ac_bookmarks: since 2.10 912# 913# @muhenkan: since 2.12 914# 915# @katakanahiragana: since 2.12 916# 917# @lang1: since 6.1 918# 919# @lang2: since 6.1 920# 921# @f13: since 8.0 922# 923# @f14: since 8.0 924# 925# @f15: since 8.0 926# 927# @f16: since 8.0 928# 929# @f17: since 8.0 930# 931# @f18: since 8.0 932# 933# @f19: since 8.0 934# 935# @f20: since 8.0 936# 937# @f21: since 8.0 938# 939# @f22: since 8.0 940# 941# @f23: since 8.0 942# 943# @f24: since 8.0 944# 945# 'sysrq' was mistakenly added to hack around the fact that the ps2 946# driver was not generating correct scancodes sequences when 947# 'alt+print' was pressed. This flaw is now fixed and the 'sysrq' key 948# serves no further purpose. Any further use of 'sysrq' will be 949# transparently changed to 'print', so they are effectively synonyms. 950# 951# Since: 1.3 952## 953{ 'enum': 'QKeyCode', 954 'data': [ 'unmapped', 955 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 956 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 957 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 958 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 959 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 960 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 961 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 962 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 963 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 964 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 965 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 966 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 967 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 968 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 969 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 970 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 971 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 972 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 973 'volumeup', 'volumedown', 'mediaselect', 974 'mail', 'calculator', 'computer', 975 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks', 976 'lang1', 'lang2','f13','f14','f15','f16','f17','f18','f19','f20','f21','f22','f23','f24' ] } 977 978## 979# @KeyValueKind: 980# 981# Since: 1.3 982## 983{ 'enum': 'KeyValueKind', 984 'data': [ 'number', 'qcode' ] } 985 986## 987# @IntWrapper: 988# 989# @data: a numeric key code 990# 991# Since: 1.3 992## 993{ 'struct': 'IntWrapper', 994 'data': { 'data': 'int' } } 995 996## 997# @QKeyCodeWrapper: 998# 999# @data: An enumeration of key name 1000# 1001# Since: 1.3 1002## 1003{ 'struct': 'QKeyCodeWrapper', 1004 'data': { 'data': 'QKeyCode' } } 1005 1006## 1007# @KeyValue: 1008# 1009# Represents a keyboard key. 1010# 1011# @type: key encoding 1012# 1013# Since: 1.3 1014## 1015{ 'union': 'KeyValue', 1016 'base': { 'type': 'KeyValueKind' }, 1017 'discriminator': 'type', 1018 'data': { 1019 'number': 'IntWrapper', 1020 'qcode': 'QKeyCodeWrapper' } } 1021 1022## 1023# @send-key: 1024# 1025# Send keys to guest. 1026# 1027# @keys: An array of @KeyValue elements. All @KeyValues in this array 1028# are simultaneously sent to the guest. A @KeyValue.number value 1029# is sent directly to the guest, while @KeyValue.qcode must be a 1030# valid @QKeyCode value 1031# 1032# @hold-time: time to delay key up events, milliseconds. Defaults to 1033# 100 1034# 1035# Errors: 1036# - If key is unknown or redundant, GenericError 1037# 1038# Since: 1.3 1039# 1040# Example: 1041# 1042# -> { "execute": "send-key", 1043# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 1044# { "type": "qcode", "data": "alt" }, 1045# { "type": "qcode", "data": "delete" } ] } } 1046# <- { "return": {} } 1047## 1048{ 'command': 'send-key', 1049 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 1050 1051## 1052# @InputButton: 1053# 1054# Button of a pointer input device (mouse, tablet). 1055# 1056# @side: front side button of a 5-button mouse (since 2.9) 1057# 1058# @extra: rear side button of a 5-button mouse (since 2.9) 1059# 1060# @touch: screen contact on a multi-touch device (since 8.1) 1061# 1062# Since: 2.0 1063## 1064{ 'enum' : 'InputButton', 1065 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 1066 'extra', 'wheel-left', 'wheel-right', 'touch' ] } 1067 1068## 1069# @InputAxis: 1070# 1071# Position axis of a pointer input device (mouse, tablet). 1072# 1073# Since: 2.0 1074## 1075{ 'enum' : 'InputAxis', 1076 'data' : [ 'x', 'y' ] } 1077 1078## 1079# @InputMultiTouchType: 1080# 1081# Type of a multi-touch event. 1082# 1083# Since: 8.1 1084## 1085{ 'enum' : 'InputMultiTouchType', 1086 'data' : [ 'begin', 'update', 'end', 'cancel', 'data' ] } 1087 1088 1089## 1090# @InputKeyEvent: 1091# 1092# Keyboard input event. 1093# 1094# @key: Which key this event is for. 1095# 1096# @down: True for key-down and false for key-up events. 1097# 1098# Since: 2.0 1099## 1100{ 'struct' : 'InputKeyEvent', 1101 'data' : { 'key' : 'KeyValue', 1102 'down' : 'bool' } } 1103 1104## 1105# @InputBtnEvent: 1106# 1107# Pointer button input event. 1108# 1109# @button: Which button this event is for. 1110# 1111# @down: True for key-down and false for key-up events. 1112# 1113# Since: 2.0 1114## 1115{ 'struct' : 'InputBtnEvent', 1116 'data' : { 'button' : 'InputButton', 1117 'down' : 'bool' } } 1118 1119## 1120# @InputMoveEvent: 1121# 1122# Pointer motion input event. 1123# 1124# @axis: Which axis is referenced by @value. 1125# 1126# @value: Pointer position. For absolute coordinates the valid range 1127# is 0 -> 0x7ffff 1128# 1129# Since: 2.0 1130## 1131{ 'struct' : 'InputMoveEvent', 1132 'data' : { 'axis' : 'InputAxis', 1133 'value' : 'int' } } 1134 1135## 1136# @InputMultiTouchEvent: 1137# 1138# MultiTouch input event. 1139# 1140# @slot: Which slot has generated the event. 1141# 1142# @tracking-id: ID to correlate this event with previously generated 1143# events. 1144# 1145# @axis: Which axis is referenced by @value. 1146# 1147# @value: Contact position. 1148# 1149# Since: 8.1 1150## 1151{ 'struct' : 'InputMultiTouchEvent', 1152 'data' : { 'type' : 'InputMultiTouchType', 1153 'slot' : 'int', 1154 'tracking-id': 'int', 1155 'axis' : 'InputAxis', 1156 'value' : 'int' } } 1157 1158## 1159# @InputEventKind: 1160# 1161# @key: a keyboard input event 1162# 1163# @btn: a pointer button input event 1164# 1165# @rel: a relative pointer motion input event 1166# 1167# @abs: an absolute pointer motion input event 1168# 1169# @mtt: a multi-touch input event 1170# 1171# Since: 2.0 1172## 1173{ 'enum': 'InputEventKind', 1174 'data': [ 'key', 'btn', 'rel', 'abs', 'mtt' ] } 1175 1176## 1177# @InputKeyEventWrapper: 1178# 1179# @data: Keyboard input event 1180# 1181# Since: 2.0 1182## 1183{ 'struct': 'InputKeyEventWrapper', 1184 'data': { 'data': 'InputKeyEvent' } } 1185 1186## 1187# @InputBtnEventWrapper: 1188# 1189# @data: Pointer button input event 1190# 1191# Since: 2.0 1192## 1193{ 'struct': 'InputBtnEventWrapper', 1194 'data': { 'data': 'InputBtnEvent' } } 1195 1196## 1197# @InputMoveEventWrapper: 1198# 1199# @data: Pointer motion input event 1200# 1201# Since: 2.0 1202## 1203{ 'struct': 'InputMoveEventWrapper', 1204 'data': { 'data': 'InputMoveEvent' } } 1205 1206## 1207# @InputMultiTouchEventWrapper: 1208# 1209# @data: MultiTouch input event 1210# 1211# Since: 8.1 1212## 1213{ 'struct': 'InputMultiTouchEventWrapper', 1214 'data': { 'data': 'InputMultiTouchEvent' } } 1215 1216## 1217# @InputEvent: 1218# 1219# Input event union. 1220# 1221# @type: the type of input event 1222# 1223# Since: 2.0 1224## 1225{ 'union' : 'InputEvent', 1226 'base': { 'type': 'InputEventKind' }, 1227 'discriminator': 'type', 1228 'data' : { 'key' : 'InputKeyEventWrapper', 1229 'btn' : 'InputBtnEventWrapper', 1230 'rel' : 'InputMoveEventWrapper', 1231 'abs' : 'InputMoveEventWrapper', 1232 'mtt' : 'InputMultiTouchEventWrapper' } } 1233 1234## 1235# @input-send-event: 1236# 1237# Send input event(s) to guest. 1238# 1239# The @device and @head parameters can be used to send the input event 1240# to specific input devices in case (a) multiple input devices of the 1241# same kind are added to the virtual machine and (b) you have 1242# configured input routing (see docs/multiseat.txt) for those input 1243# devices. The parameters work exactly like the device and head 1244# properties of input devices. If @device is missing, only devices 1245# that have no input routing config are admissible. If @device is 1246# specified, both input devices with and without input routing config 1247# are admissible, but devices with input routing config take 1248# precedence. 1249# 1250# @device: display device to send event(s) to. 1251# 1252# @head: head to send event(s) to, in case the display device supports 1253# multiple scanouts. 1254# 1255# @events: List of InputEvent union. 1256# 1257# Since: 2.6 1258# 1259# Note: The consoles are visible in the qom tree, under 1260# /backend/console[$index]. They have a device link and head 1261# property, so it is possible to map which console belongs to 1262# which device and display. 1263# 1264# Examples: 1265# 1266# 1. Press left mouse button. 1267# 1268# -> { "execute": "input-send-event", 1269# "arguments": { "device": "video0", 1270# "events": [ { "type": "btn", 1271# "data" : { "down": true, "button": "left" } } ] } } 1272# <- { "return": {} } 1273# 1274# -> { "execute": "input-send-event", 1275# "arguments": { "device": "video0", 1276# "events": [ { "type": "btn", 1277# "data" : { "down": false, "button": "left" } } ] } } 1278# <- { "return": {} } 1279# 1280# 2. Press ctrl-alt-del. 1281# 1282# -> { "execute": "input-send-event", 1283# "arguments": { "events": [ 1284# { "type": "key", "data" : { "down": true, 1285# "key": {"type": "qcode", "data": "ctrl" } } }, 1286# { "type": "key", "data" : { "down": true, 1287# "key": {"type": "qcode", "data": "alt" } } }, 1288# { "type": "key", "data" : { "down": true, 1289# "key": {"type": "qcode", "data": "delete" } } } ] } } 1290# <- { "return": {} } 1291# 1292# 3. Move mouse pointer to absolute coordinates (20000, 400). 1293# 1294# -> { "execute": "input-send-event" , 1295# "arguments": { "events": [ 1296# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1297# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1298# <- { "return": {} } 1299## 1300{ 'command': 'input-send-event', 1301 'data': { '*device': 'str', 1302 '*head' : 'int', 1303 'events' : [ 'InputEvent' ] } } 1304 1305## 1306# @DisplayGTK: 1307# 1308# GTK display options. 1309# 1310# @grab-on-hover: Grab keyboard input on mouse hover. 1311# 1312# @zoom-to-fit: Zoom guest display to fit into the host window. When 1313# turned off the host window will be resized instead. In case the 1314# display device can notify the guest on window resizes 1315# (virtio-gpu) this will default to "on", assuming the guest will 1316# resize the display to match the window size then. Otherwise it 1317# defaults to "off". (Since 3.1) 1318# 1319# @show-tabs: Display the tab bar for switching between the various 1320# graphical interfaces (e.g. VGA and virtual console character 1321# devices) by default. (Since 7.1) 1322# 1323# @show-menubar: Display the main window menubar. Defaults to "on". 1324# (Since 8.0) 1325# 1326# Since: 2.12 1327## 1328{ 'struct' : 'DisplayGTK', 1329 'data' : { '*grab-on-hover' : 'bool', 1330 '*zoom-to-fit' : 'bool', 1331 '*show-tabs' : 'bool', 1332 '*show-menubar' : 'bool' } } 1333 1334## 1335# @DisplayEGLHeadless: 1336# 1337# EGL headless display options. 1338# 1339# @rendernode: Which DRM render node should be used. Default is the 1340# first available node on the host. 1341# 1342# Since: 3.1 1343## 1344{ 'struct' : 'DisplayEGLHeadless', 1345 'data' : { '*rendernode' : 'str' } } 1346 1347## 1348# @DisplayDBus: 1349# 1350# DBus display options. 1351# 1352# @addr: The D-Bus bus address (default to the session bus). 1353# 1354# @rendernode: Which DRM render node should be used. Default is the 1355# first available node on the host. 1356# 1357# @p2p: Whether to use peer-to-peer connections (accepted through 1358# @add_client). 1359# 1360# @audiodev: Use the specified DBus audiodev to export audio. 1361# 1362# Since: 7.0 1363## 1364{ 'struct' : 'DisplayDBus', 1365 'data' : { '*rendernode' : 'str', 1366 '*addr': 'str', 1367 '*p2p': 'bool', 1368 '*audiodev': 'str' } } 1369 1370## 1371# @DisplayGLMode: 1372# 1373# Display OpenGL mode. 1374# 1375# @off: Disable OpenGL (default). 1376# 1377# @on: Use OpenGL, pick context type automatically. Would better be 1378# named 'auto' but is called 'on' for backward compatibility with 1379# bool type. 1380# 1381# @core: Use OpenGL with Core (desktop) Context. 1382# 1383# @es: Use OpenGL with ES (embedded systems) Context. 1384# 1385# Since: 3.0 1386## 1387{ 'enum' : 'DisplayGLMode', 1388 'data' : [ 'off', 'on', 'core', 'es' ] } 1389 1390## 1391# @DisplayCurses: 1392# 1393# Curses display options. 1394# 1395# @charset: Font charset used by guest (default: CP437). 1396# 1397# Since: 4.0 1398## 1399{ 'struct' : 'DisplayCurses', 1400 'data' : { '*charset' : 'str' } } 1401 1402## 1403# @DisplayCocoa: 1404# 1405# Cocoa display options. 1406# 1407# @left-command-key: Enable/disable forwarding of left command key to 1408# guest. Allows command-tab window switching on the host without 1409# sending this key to the guest when "off". Defaults to "on" 1410# 1411# @full-grab: Capture all key presses, including system combos. This 1412# requires accessibility permissions, since it performs a global 1413# grab on key events. (default: off) See 1414# https://support.apple.com/en-in/guide/mac-help/mh32356/mac 1415# 1416# @swap-opt-cmd: Swap the Option and Command keys so that their key 1417# codes match their position on non-Mac keyboards and you can use 1418# Meta/Super and Alt where you expect them. (default: off) 1419# 1420# @zoom-to-fit: Zoom guest display to fit into the host window. When 1421# turned off the host window will be resized instead. Defaults to 1422# "off". (Since 8.2) 1423# 1424# @zoom-interpolation: Apply interpolation to smooth output when 1425# zoom-to-fit is enabled. Defaults to "off". (Since 9.0) 1426# 1427# Since: 7.0 1428## 1429{ 'struct': 'DisplayCocoa', 1430 'data': { 1431 '*left-command-key': 'bool', 1432 '*full-grab': 'bool', 1433 '*swap-opt-cmd': 'bool', 1434 '*zoom-to-fit': 'bool', 1435 '*zoom-interpolation': 'bool' 1436 } } 1437 1438## 1439# @HotKeyMod: 1440# 1441# Set of modifier keys that need to be held for shortcut key actions. 1442# 1443# Since: 7.1 1444## 1445{ 'enum' : 'HotKeyMod', 1446 'data' : [ 'lctrl-lalt', 'lshift-lctrl-lalt', 'rctrl' ] } 1447 1448## 1449# @DisplaySDL: 1450# 1451# SDL2 display options. 1452# 1453# @grab-mod: Modifier keys that should be pressed together with the 1454# "G" key to release the mouse grab. 1455# 1456# Since: 7.1 1457## 1458{ 'struct' : 'DisplaySDL', 1459 'data' : { '*grab-mod' : 'HotKeyMod' } } 1460 1461## 1462# @DisplayType: 1463# 1464# Display (user interface) type. 1465# 1466# @default: The default user interface, selecting from the first 1467# available of gtk, sdl, cocoa, and vnc. 1468# 1469# @none: No user interface or video output display. The guest will 1470# still see an emulated graphics card, but its output will not be 1471# displayed to the QEMU user. 1472# 1473# @gtk: The GTK user interface. 1474# 1475# @sdl: The SDL user interface. 1476# 1477# @egl-headless: No user interface, offload GL operations to a local 1478# DRI device. Graphical display need to be paired with VNC or 1479# Spice. (Since 3.1) 1480# 1481# @curses: Display video output via curses. For graphics device 1482# models which support a text mode, QEMU can display this output 1483# using a curses/ncurses interface. Nothing is displayed when the 1484# graphics device is in graphical mode or if the graphics device 1485# does not support a text mode. Generally only the VGA device 1486# models support text mode. 1487# 1488# @cocoa: The Cocoa user interface. 1489# 1490# @spice-app: Set up a Spice server and run the default associated 1491# application to connect to it. The server will redirect the 1492# serial console and QEMU monitors. (Since 4.0) 1493# 1494# @dbus: Start a D-Bus service for the display. (Since 7.0) 1495# 1496# Since: 2.12 1497## 1498{ 'enum' : 'DisplayType', 1499 'data' : [ 1500 { 'name': 'default' }, 1501 { 'name': 'none' }, 1502 { 'name': 'gtk', 'if': 'CONFIG_GTK' }, 1503 { 'name': 'sdl', 'if': 'CONFIG_SDL' }, 1504 { 'name': 'egl-headless', 'if': 'CONFIG_OPENGL' }, 1505 { 'name': 'curses', 'if': 'CONFIG_CURSES' }, 1506 { 'name': 'cocoa', 'if': 'CONFIG_COCOA' }, 1507 { 'name': 'spice-app', 'if': 'CONFIG_SPICE' }, 1508 { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' } 1509 ] 1510} 1511 1512## 1513# @DisplayOptions: 1514# 1515# Display (user interface) options. 1516# 1517# @type: Which DisplayType qemu should use. 1518# 1519# @full-screen: Start user interface in fullscreen mode 1520# (default: off). 1521# 1522# @window-close: Allow to quit qemu with window close button 1523# (default: on). 1524# 1525# @show-cursor: Force showing the mouse cursor (default: off). 1526# (since: 5.0) 1527# 1528# @gl: Enable OpenGL support (default: off). 1529# 1530# Since: 2.12 1531## 1532{ 'union' : 'DisplayOptions', 1533 'base' : { 'type' : 'DisplayType', 1534 '*full-screen' : 'bool', 1535 '*window-close' : 'bool', 1536 '*show-cursor' : 'bool', 1537 '*gl' : 'DisplayGLMode' }, 1538 'discriminator' : 'type', 1539 'data' : { 1540 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' }, 1541 'cocoa': { 'type': 'DisplayCocoa', 'if': 'CONFIG_COCOA' }, 1542 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' }, 1543 'egl-headless': { 'type': 'DisplayEGLHeadless', 1544 'if': 'CONFIG_OPENGL' }, 1545 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }, 1546 'sdl': { 'type': 'DisplaySDL', 'if': 'CONFIG_SDL' } 1547 } 1548} 1549 1550## 1551# @query-display-options: 1552# 1553# Returns information about display configuration 1554# 1555# Returns: @DisplayOptions 1556# 1557# Since: 3.1 1558## 1559{ 'command': 'query-display-options', 1560 'returns': 'DisplayOptions' } 1561 1562## 1563# @DisplayReloadType: 1564# 1565# Available DisplayReload types. 1566# 1567# @vnc: VNC display 1568# 1569# Since: 6.0 1570## 1571{ 'enum': 'DisplayReloadType', 1572 'data': ['vnc'] } 1573 1574## 1575# @DisplayReloadOptionsVNC: 1576# 1577# Specify the VNC reload options. 1578# 1579# @tls-certs: reload tls certs or not. 1580# 1581# Since: 6.0 1582## 1583{ 'struct': 'DisplayReloadOptionsVNC', 1584 'data': { '*tls-certs': 'bool' } } 1585 1586## 1587# @DisplayReloadOptions: 1588# 1589# Options of the display configuration reload. 1590# 1591# @type: Specify the display type. 1592# 1593# Since: 6.0 1594## 1595{ 'union': 'DisplayReloadOptions', 1596 'base': {'type': 'DisplayReloadType'}, 1597 'discriminator': 'type', 1598 'data': { 'vnc': 'DisplayReloadOptionsVNC' } } 1599 1600## 1601# @display-reload: 1602# 1603# Reload display configuration. 1604# 1605# Since: 6.0 1606# 1607# Example: 1608# 1609# -> { "execute": "display-reload", 1610# "arguments": { "type": "vnc", "tls-certs": true } } 1611# <- { "return": {} } 1612## 1613{ 'command': 'display-reload', 1614 'data': 'DisplayReloadOptions', 1615 'boxed' : true } 1616 1617## 1618# @DisplayUpdateType: 1619# 1620# Available DisplayUpdate types. 1621# 1622# @vnc: VNC display 1623# 1624# Since: 7.1 1625## 1626{ 'enum': 'DisplayUpdateType', 1627 'data': ['vnc'] } 1628 1629## 1630# @DisplayUpdateOptionsVNC: 1631# 1632# Specify the VNC reload options. 1633# 1634# @addresses: If specified, change set of addresses to listen for 1635# connections. Addresses configured for websockets are not 1636# touched. 1637# 1638# Since: 7.1 1639## 1640{ 'struct': 'DisplayUpdateOptionsVNC', 1641 'data': { '*addresses': ['SocketAddress'] } } 1642 1643## 1644# @DisplayUpdateOptions: 1645# 1646# Options of the display configuration reload. 1647# 1648# @type: Specify the display type. 1649# 1650# Since: 7.1 1651## 1652{ 'union': 'DisplayUpdateOptions', 1653 'base': {'type': 'DisplayUpdateType'}, 1654 'discriminator': 'type', 1655 'data': { 'vnc': 'DisplayUpdateOptionsVNC' } } 1656 1657## 1658# @display-update: 1659# 1660# Update display configuration. 1661# 1662# Since: 7.1 1663# 1664# Example: 1665# 1666# -> { "execute": "display-update", 1667# "arguments": { "type": "vnc", "addresses": 1668# [ { "type": "inet", "host": "0.0.0.0", 1669# "port": "5901" } ] } } 1670# <- { "return": {} } 1671## 1672{ 'command': 'display-update', 1673 'data': 'DisplayUpdateOptions', 1674 'boxed' : true } 1675 1676## 1677# @client_migrate_info: 1678# 1679# Set migration information for remote display. This makes the server 1680# ask the client to automatically reconnect using the new parameters 1681# once migration finished successfully. Only implemented for SPICE. 1682# 1683# @protocol: must be "spice" 1684# 1685# @hostname: migration target hostname 1686# 1687# @port: spice tcp port for plaintext channels 1688# 1689# @tls-port: spice tcp port for tls-secured channels 1690# 1691# @cert-subject: server certificate subject 1692# 1693# Since: 0.14 1694# 1695# Example: 1696# 1697# -> { "execute": "client_migrate_info", 1698# "arguments": { "protocol": "spice", 1699# "hostname": "virt42.lab.kraxel.org", 1700# "port": 1234 } } 1701# <- { "return": {} } 1702## 1703{ 'command': 'client_migrate_info', 1704 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int', 1705 '*tls-port': 'int', '*cert-subject': 'str' } } 1706