1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Remote desktop 7## 8 9{ 'include': 'sockets.json' } 10 11## 12# @set_password: 13# 14# Sets the password of a remote display session. 15# 16# @protocol: - 'vnc' to modify the VNC server password 17# - 'spice' to modify the Spice server password 18# 19# @password: the new password 20# 21# @connected: how to handle existing clients when changing the 22# password. If nothing is specified, defaults to 'keep' 23# 'fail' to fail the command if clients are connected 24# 'disconnect' to disconnect existing clients 25# 'keep' to maintain existing clients 26# 27# Returns: - Nothing on success 28# - If Spice is not enabled, DeviceNotFound 29# 30# Since: 0.14 31# 32# Example: 33# 34# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 35# "password": "secret" } } 36# <- { "return": {} } 37# 38## 39{ 'command': 'set_password', 40 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } 41 42## 43# @expire_password: 44# 45# Expire the password of a remote display server. 46# 47# @protocol: the name of the remote display protocol 'vnc' or 'spice' 48# 49# @time: when to expire the password. 50# 51# - 'now' to expire the password immediately 52# - 'never' to cancel password expiration 53# - '+INT' where INT is the number of seconds from now (integer) 54# - 'INT' where INT is the absolute time in seconds 55# 56# Returns: - Nothing on success 57# - If @protocol is 'spice' and Spice is not active, DeviceNotFound 58# 59# Since: 0.14 60# 61# Notes: Time is relative to the server and currently there is no way to 62# coordinate server time with client time. It is not recommended to 63# use the absolute time version of the @time parameter unless you're 64# sure you are on the same machine as the QEMU instance. 65# 66# Example: 67# 68# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 69# "time": "+60" } } 70# <- { "return": {} } 71# 72## 73{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } 74 75## 76# @screendump: 77# 78# Write a PPM of the VGA screen to a file. 79# 80# @filename: the path of a new PPM file to store the image 81# 82# @device: ID of the display device that should be dumped. If this parameter 83# is missing, the primary display will be used. (Since 2.12) 84# 85# @head: head to use in case the device supports multiple heads. If this 86# parameter is missing, head #0 will be used. Also note that the head 87# can only be specified in conjunction with the device ID. (Since 2.12) 88# 89# Returns: Nothing on success 90# 91# Since: 0.14 92# 93# Example: 94# 95# -> { "execute": "screendump", 96# "arguments": { "filename": "/tmp/image" } } 97# <- { "return": {} } 98# 99## 100{ 'command': 'screendump', 101 'data': {'filename': 'str', '*device': 'str', '*head': 'int'}, 102 'coroutine': true } 103 104## 105# == Spice 106## 107 108## 109# @SpiceBasicInfo: 110# 111# The basic information for SPICE network connection 112# 113# @host: IP address 114# 115# @port: port number 116# 117# @family: address family 118# 119# Since: 2.1 120## 121{ 'struct': 'SpiceBasicInfo', 122 'data': { 'host': 'str', 123 'port': 'str', 124 'family': 'NetworkAddressFamily' }, 125 'if': 'defined(CONFIG_SPICE)' } 126 127## 128# @SpiceServerInfo: 129# 130# Information about a SPICE server 131# 132# @auth: authentication method 133# 134# Since: 2.1 135## 136{ 'struct': 'SpiceServerInfo', 137 'base': 'SpiceBasicInfo', 138 'data': { '*auth': 'str' }, 139 'if': 'defined(CONFIG_SPICE)' } 140 141## 142# @SpiceChannel: 143# 144# Information about a SPICE client channel. 145# 146# @connection-id: SPICE connection id number. All channels with the same id 147# belong to the same SPICE session. 148# 149# @channel-type: SPICE channel type number. "1" is the main control 150# channel, filter for this one if you want to track spice 151# sessions only 152# 153# @channel-id: SPICE channel ID number. Usually "0", might be different when 154# multiple channels of the same type exist, such as multiple 155# display channels in a multihead setup 156# 157# @tls: true if the channel is encrypted, false otherwise. 158# 159# Since: 0.14 160## 161{ 'struct': 'SpiceChannel', 162 'base': 'SpiceBasicInfo', 163 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 164 'tls': 'bool'}, 165 'if': 'defined(CONFIG_SPICE)' } 166 167## 168# @SpiceQueryMouseMode: 169# 170# An enumeration of Spice mouse states. 171# 172# @client: Mouse cursor position is determined by the client. 173# 174# @server: Mouse cursor position is determined by the server. 175# 176# @unknown: No information is available about mouse mode used by 177# the spice server. 178# 179# Note: spice/enums.h has a SpiceMouseMode already, hence the name. 180# 181# Since: 1.1 182## 183{ 'enum': 'SpiceQueryMouseMode', 184 'data': [ 'client', 'server', 'unknown' ], 185 'if': 'defined(CONFIG_SPICE)' } 186 187## 188# @SpiceInfo: 189# 190# Information about the SPICE session. 191# 192# @enabled: true if the SPICE server is enabled, false otherwise 193# 194# @migrated: true if the last guest migration completed and spice 195# migration had completed as well. false otherwise. (since 1.4) 196# 197# @host: The hostname the SPICE server is bound to. This depends on 198# the name resolution on the host and may be an IP address. 199# 200# @port: The SPICE server's port number. 201# 202# @compiled-version: SPICE server version. 203# 204# @tls-port: The SPICE server's TLS port number. 205# 206# @auth: the current authentication type used by the server 207# 208# - 'none' if no authentication is being used 209# - 'spice' uses SASL or direct TLS authentication, depending on command 210# line options 211# 212# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can 213# be determined by the client or the server, or unknown if spice 214# server doesn't provide this information. (since: 1.1) 215# 216# @channels: a list of @SpiceChannel for each active spice channel 217# 218# Since: 0.14 219## 220{ 'struct': 'SpiceInfo', 221 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 222 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 223 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 224 'if': 'defined(CONFIG_SPICE)' } 225 226## 227# @query-spice: 228# 229# Returns information about the current SPICE server 230# 231# Returns: @SpiceInfo 232# 233# Since: 0.14 234# 235# Example: 236# 237# -> { "execute": "query-spice" } 238# <- { "return": { 239# "enabled": true, 240# "auth": "spice", 241# "port": 5920, 242# "tls-port": 5921, 243# "host": "0.0.0.0", 244# "channels": [ 245# { 246# "port": "54924", 247# "family": "ipv4", 248# "channel-type": 1, 249# "connection-id": 1804289383, 250# "host": "127.0.0.1", 251# "channel-id": 0, 252# "tls": true 253# }, 254# { 255# "port": "36710", 256# "family": "ipv4", 257# "channel-type": 4, 258# "connection-id": 1804289383, 259# "host": "127.0.0.1", 260# "channel-id": 0, 261# "tls": false 262# }, 263# [ ... more channels follow ... ] 264# ] 265# } 266# } 267# 268## 269{ 'command': 'query-spice', 'returns': 'SpiceInfo', 270 'if': 'defined(CONFIG_SPICE)' } 271 272## 273# @SPICE_CONNECTED: 274# 275# Emitted when a SPICE client establishes a connection 276# 277# @server: server information 278# 279# @client: client information 280# 281# Since: 0.14 282# 283# Example: 284# 285# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 286# "event": "SPICE_CONNECTED", 287# "data": { 288# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 289# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 290# }} 291# 292## 293{ 'event': 'SPICE_CONNECTED', 294 'data': { 'server': 'SpiceBasicInfo', 295 'client': 'SpiceBasicInfo' }, 296 'if': 'defined(CONFIG_SPICE)' } 297 298## 299# @SPICE_INITIALIZED: 300# 301# Emitted after initial handshake and authentication takes place (if any) 302# and the SPICE channel is up and running 303# 304# @server: server information 305# 306# @client: client information 307# 308# Since: 0.14 309# 310# Example: 311# 312# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 313# "event": "SPICE_INITIALIZED", 314# "data": {"server": {"auth": "spice", "port": "5921", 315# "family": "ipv4", "host": "127.0.0.1"}, 316# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 317# "connection-id": 1804289383, "host": "127.0.0.1", 318# "channel-id": 0, "tls": true} 319# }} 320# 321## 322{ 'event': 'SPICE_INITIALIZED', 323 'data': { 'server': 'SpiceServerInfo', 324 'client': 'SpiceChannel' }, 325 'if': 'defined(CONFIG_SPICE)' } 326 327## 328# @SPICE_DISCONNECTED: 329# 330# Emitted when the SPICE connection is closed 331# 332# @server: server information 333# 334# @client: client information 335# 336# Since: 0.14 337# 338# Example: 339# 340# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 341# "event": "SPICE_DISCONNECTED", 342# "data": { 343# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 344# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 345# }} 346# 347## 348{ 'event': 'SPICE_DISCONNECTED', 349 'data': { 'server': 'SpiceBasicInfo', 350 'client': 'SpiceBasicInfo' }, 351 'if': 'defined(CONFIG_SPICE)' } 352 353## 354# @SPICE_MIGRATE_COMPLETED: 355# 356# Emitted when SPICE migration has completed 357# 358# Since: 1.3 359# 360# Example: 361# 362# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 363# "event": "SPICE_MIGRATE_COMPLETED" } 364# 365## 366{ 'event': 'SPICE_MIGRATE_COMPLETED', 367 'if': 'defined(CONFIG_SPICE)' } 368 369## 370# == VNC 371## 372 373## 374# @VncBasicInfo: 375# 376# The basic information for vnc network connection 377# 378# @host: IP address 379# 380# @service: The service name of the vnc port. This may depend on the host 381# system's service database so symbolic names should not be relied 382# on. 383# 384# @family: address family 385# 386# @websocket: true in case the socket is a websocket (since 2.3). 387# 388# Since: 2.1 389## 390{ 'struct': 'VncBasicInfo', 391 'data': { 'host': 'str', 392 'service': 'str', 393 'family': 'NetworkAddressFamily', 394 'websocket': 'bool' }, 395 'if': 'defined(CONFIG_VNC)' } 396 397## 398# @VncServerInfo: 399# 400# The network connection information for server 401# 402# @auth: authentication method used for 403# the plain (non-websocket) VNC server 404# 405# Since: 2.1 406## 407{ 'struct': 'VncServerInfo', 408 'base': 'VncBasicInfo', 409 'data': { '*auth': 'str' }, 410 'if': 'defined(CONFIG_VNC)' } 411 412## 413# @VncClientInfo: 414# 415# Information about a connected VNC client. 416# 417# @x509_dname: If x509 authentication is in use, the Distinguished 418# Name of the client. 419# 420# @sasl_username: If SASL authentication is in use, the SASL username 421# used for authentication. 422# 423# Since: 0.14 424## 425{ 'struct': 'VncClientInfo', 426 'base': 'VncBasicInfo', 427 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 428 'if': 'defined(CONFIG_VNC)' } 429 430## 431# @VncInfo: 432# 433# Information about the VNC session. 434# 435# @enabled: true if the VNC server is enabled, false otherwise 436# 437# @host: The hostname the VNC server is bound to. This depends on 438# the name resolution on the host and may be an IP address. 439# 440# @family: - 'ipv6' if the host is listening for IPv6 connections 441# - 'ipv4' if the host is listening for IPv4 connections 442# - 'unix' if the host is listening on a unix domain socket 443# - 'unknown' otherwise 444# 445# @service: The service name of the server's port. This may depends 446# on the host system's service database so symbolic names should not 447# be relied on. 448# 449# @auth: the current authentication type used by the server 450# 451# - 'none' if no authentication is being used 452# - 'vnc' if VNC authentication is being used 453# - 'vencrypt+plain' if VEncrypt is used with plain text authentication 454# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication 455# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication 456# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth 457# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 458# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 459# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth 460# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 461# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth 462# 463# @clients: a list of @VncClientInfo of all currently connected clients 464# 465# Since: 0.14 466## 467{ 'struct': 'VncInfo', 468 'data': {'enabled': 'bool', '*host': 'str', 469 '*family': 'NetworkAddressFamily', 470 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 471 'if': 'defined(CONFIG_VNC)' } 472 473## 474# @VncPrimaryAuth: 475# 476# vnc primary authentication method. 477# 478# Since: 2.3 479## 480{ 'enum': 'VncPrimaryAuth', 481 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 482 'tls', 'vencrypt', 'sasl' ], 483 'if': 'defined(CONFIG_VNC)' } 484 485## 486# @VncVencryptSubAuth: 487# 488# vnc sub authentication method with vencrypt. 489# 490# Since: 2.3 491## 492{ 'enum': 'VncVencryptSubAuth', 493 'data': [ 'plain', 494 'tls-none', 'x509-none', 495 'tls-vnc', 'x509-vnc', 496 'tls-plain', 'x509-plain', 497 'tls-sasl', 'x509-sasl' ], 498 'if': 'defined(CONFIG_VNC)' } 499 500## 501# @VncServerInfo2: 502# 503# The network connection information for server 504# 505# @auth: The current authentication type used by the servers 506# 507# @vencrypt: The vencrypt sub authentication type used by the 508# servers, only specified in case auth == vencrypt. 509# 510# Since: 2.9 511## 512{ 'struct': 'VncServerInfo2', 513 'base': 'VncBasicInfo', 514 'data': { 'auth' : 'VncPrimaryAuth', 515 '*vencrypt' : 'VncVencryptSubAuth' }, 516 'if': 'defined(CONFIG_VNC)' } 517 518## 519# @VncInfo2: 520# 521# Information about a vnc server 522# 523# @id: vnc server name. 524# 525# @server: A list of @VncBasincInfo describing all listening sockets. 526# The list can be empty (in case the vnc server is disabled). 527# It also may have multiple entries: normal + websocket, 528# possibly also ipv4 + ipv6 in the future. 529# 530# @clients: A list of @VncClientInfo of all currently connected clients. 531# The list can be empty, for obvious reasons. 532# 533# @auth: The current authentication type used by the non-websockets servers 534# 535# @vencrypt: The vencrypt authentication type used by the servers, 536# only specified in case auth == vencrypt. 537# 538# @display: The display device the vnc server is linked to. 539# 540# Since: 2.3 541## 542{ 'struct': 'VncInfo2', 543 'data': { 'id' : 'str', 544 'server' : ['VncServerInfo2'], 545 'clients' : ['VncClientInfo'], 546 'auth' : 'VncPrimaryAuth', 547 '*vencrypt' : 'VncVencryptSubAuth', 548 '*display' : 'str' }, 549 'if': 'defined(CONFIG_VNC)' } 550 551## 552# @query-vnc: 553# 554# Returns information about the current VNC server 555# 556# Returns: @VncInfo 557# 558# Since: 0.14 559# 560# Example: 561# 562# -> { "execute": "query-vnc" } 563# <- { "return": { 564# "enabled":true, 565# "host":"0.0.0.0", 566# "service":"50402", 567# "auth":"vnc", 568# "family":"ipv4", 569# "clients":[ 570# { 571# "host":"127.0.0.1", 572# "service":"50401", 573# "family":"ipv4" 574# } 575# ] 576# } 577# } 578# 579## 580{ 'command': 'query-vnc', 'returns': 'VncInfo', 581 'if': 'defined(CONFIG_VNC)' } 582## 583# @query-vnc-servers: 584# 585# Returns a list of vnc servers. The list can be empty. 586# 587# Returns: a list of @VncInfo2 588# 589# Since: 2.3 590## 591{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 592 'if': 'defined(CONFIG_VNC)' } 593 594## 595# @change-vnc-password: 596# 597# Change the VNC server password. 598# 599# @password: the new password to use with VNC authentication 600# 601# Since: 1.1 602# 603# Notes: An empty password in this command will set the password to the empty 604# string. Existing clients are unaffected by executing this command. 605## 606{ 'command': 'change-vnc-password', 607 'data': { 'password': 'str' }, 608 'if': 'defined(CONFIG_VNC)' } 609 610## 611# @VNC_CONNECTED: 612# 613# Emitted when a VNC client establishes a connection 614# 615# @server: server information 616# 617# @client: client information 618# 619# Note: This event is emitted before any authentication takes place, thus 620# the authentication ID is not provided 621# 622# Since: 0.13 623# 624# Example: 625# 626# <- { "event": "VNC_CONNECTED", 627# "data": { 628# "server": { "auth": "sasl", "family": "ipv4", 629# "service": "5901", "host": "0.0.0.0" }, 630# "client": { "family": "ipv4", "service": "58425", 631# "host": "127.0.0.1" } }, 632# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 633# 634## 635{ 'event': 'VNC_CONNECTED', 636 'data': { 'server': 'VncServerInfo', 637 'client': 'VncBasicInfo' }, 638 'if': 'defined(CONFIG_VNC)' } 639 640## 641# @VNC_INITIALIZED: 642# 643# Emitted after authentication takes place (if any) and the VNC session is 644# made active 645# 646# @server: server information 647# 648# @client: client information 649# 650# Since: 0.13 651# 652# Example: 653# 654# <- { "event": "VNC_INITIALIZED", 655# "data": { 656# "server": { "auth": "sasl", "family": "ipv4", 657# "service": "5901", "host": "0.0.0.0"}, 658# "client": { "family": "ipv4", "service": "46089", 659# "host": "127.0.0.1", "sasl_username": "luiz" } }, 660# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 661# 662## 663{ 'event': 'VNC_INITIALIZED', 664 'data': { 'server': 'VncServerInfo', 665 'client': 'VncClientInfo' }, 666 'if': 'defined(CONFIG_VNC)' } 667 668## 669# @VNC_DISCONNECTED: 670# 671# Emitted when the connection is closed 672# 673# @server: server information 674# 675# @client: client information 676# 677# Since: 0.13 678# 679# Example: 680# 681# <- { "event": "VNC_DISCONNECTED", 682# "data": { 683# "server": { "auth": "sasl", "family": "ipv4", 684# "service": "5901", "host": "0.0.0.0" }, 685# "client": { "family": "ipv4", "service": "58425", 686# "host": "127.0.0.1", "sasl_username": "luiz" } }, 687# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 688# 689## 690{ 'event': 'VNC_DISCONNECTED', 691 'data': { 'server': 'VncServerInfo', 692 'client': 'VncClientInfo' }, 693 'if': 'defined(CONFIG_VNC)' } 694 695## 696# = Input 697## 698 699## 700# @MouseInfo: 701# 702# Information about a mouse device. 703# 704# @name: the name of the mouse device 705# 706# @index: the index of the mouse device 707# 708# @current: true if this device is currently receiving mouse events 709# 710# @absolute: true if this device supports absolute coordinates as input 711# 712# Since: 0.14 713## 714{ 'struct': 'MouseInfo', 715 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 716 'absolute': 'bool'} } 717 718## 719# @query-mice: 720# 721# Returns information about each active mouse device 722# 723# Returns: a list of @MouseInfo for each device 724# 725# Since: 0.14 726# 727# Example: 728# 729# -> { "execute": "query-mice" } 730# <- { "return": [ 731# { 732# "name":"QEMU Microsoft Mouse", 733# "index":0, 734# "current":false, 735# "absolute":false 736# }, 737# { 738# "name":"QEMU PS/2 Mouse", 739# "index":1, 740# "current":true, 741# "absolute":true 742# } 743# ] 744# } 745# 746## 747{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 748 749## 750# @QKeyCode: 751# 752# An enumeration of key name. 753# 754# This is used by the @send-key command. 755# 756# @unmapped: since 2.0 757# @pause: since 2.0 758# @ro: since 2.4 759# @kp_comma: since 2.4 760# @kp_equals: since 2.6 761# @power: since 2.6 762# @hiragana: since 2.9 763# @henkan: since 2.9 764# @yen: since 2.9 765# 766# @sleep: since 2.10 767# @wake: since 2.10 768# @audionext: since 2.10 769# @audioprev: since 2.10 770# @audiostop: since 2.10 771# @audioplay: since 2.10 772# @audiomute: since 2.10 773# @volumeup: since 2.10 774# @volumedown: since 2.10 775# @mediaselect: since 2.10 776# @mail: since 2.10 777# @calculator: since 2.10 778# @computer: since 2.10 779# @ac_home: since 2.10 780# @ac_back: since 2.10 781# @ac_forward: since 2.10 782# @ac_refresh: since 2.10 783# @ac_bookmarks: since 2.10 784# 785# @muhenkan: since 2.12 786# @katakanahiragana: since 2.12 787# 788# 'sysrq' was mistakenly added to hack around the fact that 789# the ps2 driver was not generating correct scancodes sequences 790# when 'alt+print' was pressed. This flaw is now fixed and the 791# 'sysrq' key serves no further purpose. Any further use of 792# 'sysrq' will be transparently changed to 'print', so they 793# are effectively synonyms. 794# 795# Since: 1.3 796# 797## 798{ 'enum': 'QKeyCode', 799 'data': [ 'unmapped', 800 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 801 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 802 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 803 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 804 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 805 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 806 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 807 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 808 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 809 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 810 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 811 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 812 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 813 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 814 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 815 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 816 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 817 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 818 'volumeup', 'volumedown', 'mediaselect', 819 'mail', 'calculator', 'computer', 820 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] } 821 822## 823# @KeyValue: 824# 825# Represents a keyboard key. 826# 827# Since: 1.3 828## 829{ 'union': 'KeyValue', 830 'data': { 831 'number': 'int', 832 'qcode': 'QKeyCode' } } 833 834## 835# @send-key: 836# 837# Send keys to guest. 838# 839# @keys: An array of @KeyValue elements. All @KeyValues in this array are 840# simultaneously sent to the guest. A @KeyValue.number value is sent 841# directly to the guest, while @KeyValue.qcode must be a valid 842# @QKeyCode value 843# 844# @hold-time: time to delay key up events, milliseconds. Defaults 845# to 100 846# 847# Returns: - Nothing on success 848# - If key is unknown or redundant, InvalidParameter 849# 850# Since: 1.3 851# 852# Example: 853# 854# -> { "execute": "send-key", 855# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 856# { "type": "qcode", "data": "alt" }, 857# { "type": "qcode", "data": "delete" } ] } } 858# <- { "return": {} } 859# 860## 861{ 'command': 'send-key', 862 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 863 864## 865# @InputButton: 866# 867# Button of a pointer input device (mouse, tablet). 868# 869# @side: front side button of a 5-button mouse (since 2.9) 870# 871# @extra: rear side button of a 5-button mouse (since 2.9) 872# 873# Since: 2.0 874## 875{ 'enum' : 'InputButton', 876 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 877 'extra' ] } 878 879## 880# @InputAxis: 881# 882# Position axis of a pointer input device (mouse, tablet). 883# 884# Since: 2.0 885## 886{ 'enum' : 'InputAxis', 887 'data' : [ 'x', 'y' ] } 888 889## 890# @InputKeyEvent: 891# 892# Keyboard input event. 893# 894# @key: Which key this event is for. 895# @down: True for key-down and false for key-up events. 896# 897# Since: 2.0 898## 899{ 'struct' : 'InputKeyEvent', 900 'data' : { 'key' : 'KeyValue', 901 'down' : 'bool' } } 902 903## 904# @InputBtnEvent: 905# 906# Pointer button input event. 907# 908# @button: Which button this event is for. 909# @down: True for key-down and false for key-up events. 910# 911# Since: 2.0 912## 913{ 'struct' : 'InputBtnEvent', 914 'data' : { 'button' : 'InputButton', 915 'down' : 'bool' } } 916 917## 918# @InputMoveEvent: 919# 920# Pointer motion input event. 921# 922# @axis: Which axis is referenced by @value. 923# @value: Pointer position. For absolute coordinates the 924# valid range is 0 -> 0x7ffff 925# 926# Since: 2.0 927## 928{ 'struct' : 'InputMoveEvent', 929 'data' : { 'axis' : 'InputAxis', 930 'value' : 'int' } } 931 932## 933# @InputEvent: 934# 935# Input event union. 936# 937# @type: the input type, one of: 938# 939# - 'key': Input event of Keyboard 940# - 'btn': Input event of pointer buttons 941# - 'rel': Input event of relative pointer motion 942# - 'abs': Input event of absolute pointer motion 943# 944# Since: 2.0 945## 946{ 'union' : 'InputEvent', 947 'data' : { 'key' : 'InputKeyEvent', 948 'btn' : 'InputBtnEvent', 949 'rel' : 'InputMoveEvent', 950 'abs' : 'InputMoveEvent' } } 951 952## 953# @input-send-event: 954# 955# Send input event(s) to guest. 956# 957# The @device and @head parameters can be used to send the input event 958# to specific input devices in case (a) multiple input devices of the 959# same kind are added to the virtual machine and (b) you have 960# configured input routing (see docs/multiseat.txt) for those input 961# devices. The parameters work exactly like the device and head 962# properties of input devices. If @device is missing, only devices 963# that have no input routing config are admissible. If @device is 964# specified, both input devices with and without input routing config 965# are admissible, but devices with input routing config take 966# precedence. 967# 968# @device: display device to send event(s) to. 969# @head: head to send event(s) to, in case the 970# display device supports multiple scanouts. 971# @events: List of InputEvent union. 972# 973# Returns: Nothing on success. 974# 975# Since: 2.6 976# 977# Note: The consoles are visible in the qom tree, under 978# /backend/console[$index]. They have a device link and head property, 979# so it is possible to map which console belongs to which device and 980# display. 981# 982# Example: 983# 984# 1. Press left mouse button. 985# 986# -> { "execute": "input-send-event", 987# "arguments": { "device": "video0", 988# "events": [ { "type": "btn", 989# "data" : { "down": true, "button": "left" } } ] } } 990# <- { "return": {} } 991# 992# -> { "execute": "input-send-event", 993# "arguments": { "device": "video0", 994# "events": [ { "type": "btn", 995# "data" : { "down": false, "button": "left" } } ] } } 996# <- { "return": {} } 997# 998# 2. Press ctrl-alt-del. 999# 1000# -> { "execute": "input-send-event", 1001# "arguments": { "events": [ 1002# { "type": "key", "data" : { "down": true, 1003# "key": {"type": "qcode", "data": "ctrl" } } }, 1004# { "type": "key", "data" : { "down": true, 1005# "key": {"type": "qcode", "data": "alt" } } }, 1006# { "type": "key", "data" : { "down": true, 1007# "key": {"type": "qcode", "data": "delete" } } } ] } } 1008# <- { "return": {} } 1009# 1010# 3. Move mouse pointer to absolute coordinates (20000, 400). 1011# 1012# -> { "execute": "input-send-event" , 1013# "arguments": { "events": [ 1014# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1015# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1016# <- { "return": {} } 1017# 1018## 1019{ 'command': 'input-send-event', 1020 'data': { '*device': 'str', 1021 '*head' : 'int', 1022 'events' : [ 'InputEvent' ] } } 1023 1024## 1025# @GrabToggleKeys: 1026# 1027# Keys to toggle input-linux between host and guest. 1028# 1029# Since: 4.0 1030# 1031## 1032{ 'enum': 'GrabToggleKeys', 1033 'data': [ 'ctrl-ctrl', 'alt-alt', 'shift-shift','meta-meta', 'scrolllock', 1034 'ctrl-scrolllock' ] } 1035 1036## 1037# @DisplayGTK: 1038# 1039# GTK display options. 1040# 1041# @grab-on-hover: Grab keyboard input on mouse hover. 1042# @zoom-to-fit: Zoom guest display to fit into the host window. When 1043# turned off the host window will be resized instead. 1044# In case the display device can notify the guest on 1045# window resizes (virtio-gpu) this will default to "on", 1046# assuming the guest will resize the display to match 1047# the window size then. Otherwise it defaults to "off". 1048# Since 3.1 1049# 1050# Since: 2.12 1051# 1052## 1053{ 'struct' : 'DisplayGTK', 1054 'data' : { '*grab-on-hover' : 'bool', 1055 '*zoom-to-fit' : 'bool' } } 1056 1057## 1058# @DisplayEGLHeadless: 1059# 1060# EGL headless display options. 1061# 1062# @rendernode: Which DRM render node should be used. Default is the first 1063# available node on the host. 1064# 1065# Since: 3.1 1066# 1067## 1068{ 'struct' : 'DisplayEGLHeadless', 1069 'data' : { '*rendernode' : 'str' } } 1070 1071 ## 1072 # @DisplayGLMode: 1073 # 1074 # Display OpenGL mode. 1075 # 1076 # @off: Disable OpenGL (default). 1077 # @on: Use OpenGL, pick context type automatically. 1078 # Would better be named 'auto' but is called 'on' for backward 1079 # compatibility with bool type. 1080 # @core: Use OpenGL with Core (desktop) Context. 1081 # @es: Use OpenGL with ES (embedded systems) Context. 1082 # 1083 # Since: 3.0 1084 # 1085 ## 1086{ 'enum' : 'DisplayGLMode', 1087 'data' : [ 'off', 'on', 'core', 'es' ] } 1088 1089## 1090# @DisplayCurses: 1091# 1092# Curses display options. 1093# 1094# @charset: Font charset used by guest (default: CP437). 1095# 1096# Since: 4.0 1097# 1098## 1099{ 'struct' : 'DisplayCurses', 1100 'data' : { '*charset' : 'str' } } 1101 1102## 1103# @DisplayType: 1104# 1105# Display (user interface) type. 1106# 1107# @default: The default user interface, selecting from the first available 1108# of gtk, sdl, cocoa, and vnc. 1109# 1110# @none: No user interface or video output display. The guest will 1111# still see an emulated graphics card, but its output will not 1112# be displayed to the QEMU user. 1113# 1114# @gtk: The GTK user interface. 1115# 1116# @sdl: The SDL user interface. 1117# 1118# @egl-headless: No user interface, offload GL operations to a local 1119# DRI device. Graphical display need to be paired with 1120# VNC or Spice. (Since 3.1) 1121# 1122# @curses: Display video output via curses. For graphics device 1123# models which support a text mode, QEMU can display this 1124# output using a curses/ncurses interface. Nothing is 1125# displayed when the graphics device is in graphical mode or 1126# if the graphics device does not support a text 1127# mode. Generally only the VGA device models support text 1128# mode. 1129# 1130# @cocoa: The Cocoa user interface. 1131# 1132# @spice-app: Set up a Spice server and run the default associated 1133# application to connect to it. The server will redirect 1134# the serial console and QEMU monitors. (Since 4.0) 1135# 1136# Since: 2.12 1137# 1138## 1139{ 'enum' : 'DisplayType', 1140 'data' : [ 'default', 'none', 'gtk', 'sdl', 1141 'egl-headless', 'curses', 'cocoa', 1142 'spice-app'] } 1143 1144## 1145# @DisplayOptions: 1146# 1147# Display (user interface) options. 1148# 1149# @type: Which DisplayType qemu should use. 1150# @full-screen: Start user interface in fullscreen mode (default: off). 1151# @window-close: Allow to quit qemu with window close button (default: on). 1152# @show-cursor: Force showing the mouse cursor (default: off). 1153# (since: 5.0) 1154# @gl: Enable OpenGL support (default: off). 1155# 1156# Since: 2.12 1157# 1158## 1159{ 'union' : 'DisplayOptions', 1160 'base' : { 'type' : 'DisplayType', 1161 '*full-screen' : 'bool', 1162 '*window-close' : 'bool', 1163 '*show-cursor' : 'bool', 1164 '*gl' : 'DisplayGLMode' }, 1165 'discriminator' : 'type', 1166 'data' : { 'gtk' : 'DisplayGTK', 1167 'curses' : 'DisplayCurses', 1168 'egl-headless' : 'DisplayEGLHeadless'} } 1169 1170## 1171# @query-display-options: 1172# 1173# Returns information about display configuration 1174# 1175# Returns: @DisplayOptions 1176# 1177# Since: 3.1 1178# 1179## 1180{ 'command': 'query-display-options', 1181 'returns': 'DisplayOptions' } 1182