1# -*- Mode: Python -*- 2# 3 4## 5# = Remote desktop 6## 7 8{ 'include': 'sockets.json' } 9 10## 11# @set_password: 12# 13# Sets the password of a remote display session. 14# 15# @protocol: `vnc' to modify the VNC server password 16# `spice' to modify the Spice server password 17# 18# @password: the new password 19# 20# @connected: how to handle existing clients when changing the 21# password. If nothing is specified, defaults to `keep' 22# `fail' to fail the command if clients are connected 23# `disconnect' to disconnect existing clients 24# `keep' to maintain existing clients 25# 26# Returns: Nothing on success 27# If Spice is not enabled, DeviceNotFound 28# 29# Since: 0.14.0 30# 31# Example: 32# 33# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 34# "password": "secret" } } 35# <- { "return": {} } 36# 37## 38{ 'command': 'set_password', 39 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } 40 41## 42# @expire_password: 43# 44# Expire the password of a remote display server. 45# 46# @protocol: the name of the remote display protocol `vnc' or `spice' 47# 48# @time: when to expire the password. 49# `now' to expire the password immediately 50# `never' to cancel password expiration 51# `+INT' where INT is the number of seconds from now (integer) 52# `INT' where INT is the absolute time in seconds 53# 54# Returns: Nothing on success 55# If @protocol is `spice' and Spice is not active, DeviceNotFound 56# 57# Since: 0.14.0 58# 59# Notes: Time is relative to the server and currently there is no way to 60# coordinate server time with client time. It is not recommended to 61# use the absolute time version of the @time parameter unless you're 62# sure you are on the same machine as the QEMU instance. 63# 64# Example: 65# 66# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 67# "time": "+60" } } 68# <- { "return": {} } 69# 70## 71{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } 72 73## 74# @screendump: 75# 76# Write a PPM of the VGA screen to a file. 77# 78# @filename: the path of a new PPM file to store the image 79# 80# @device: ID of the display device that should be dumped. If this parameter 81# is missing, the primary display will be used. (Since 2.12) 82# 83# @head: head to use in case the device supports multiple heads. If this 84# parameter is missing, head #0 will be used. Also note that the head 85# can only be specified in conjunction with the device ID. (Since 2.12) 86# 87# Returns: Nothing on success 88# 89# Since: 0.14.0 90# 91# Example: 92# 93# -> { "execute": "screendump", 94# "arguments": { "filename": "/tmp/image" } } 95# <- { "return": {} } 96# 97## 98{ 'command': 'screendump', 99 'data': {'filename': 'str', '*device': 'str', '*head': 'int'} } 100 101## 102# == Spice 103## 104 105## 106# @SpiceBasicInfo: 107# 108# The basic information for SPICE network connection 109# 110# @host: IP address 111# 112# @port: port number 113# 114# @family: address family 115# 116# Since: 2.1 117## 118{ 'struct': 'SpiceBasicInfo', 119 'data': { 'host': 'str', 120 'port': 'str', 121 'family': 'NetworkAddressFamily' }, 122 'if': 'defined(CONFIG_SPICE)' } 123 124## 125# @SpiceServerInfo: 126# 127# Information about a SPICE server 128# 129# @auth: authentication method 130# 131# Since: 2.1 132## 133{ 'struct': 'SpiceServerInfo', 134 'base': 'SpiceBasicInfo', 135 'data': { '*auth': 'str' }, 136 'if': 'defined(CONFIG_SPICE)' } 137 138## 139# @SpiceChannel: 140# 141# Information about a SPICE client channel. 142# 143# @connection-id: SPICE connection id number. All channels with the same id 144# belong to the same SPICE session. 145# 146# @channel-type: SPICE channel type number. "1" is the main control 147# channel, filter for this one if you want to track spice 148# sessions only 149# 150# @channel-id: SPICE channel ID number. Usually "0", might be different when 151# multiple channels of the same type exist, such as multiple 152# display channels in a multihead setup 153# 154# @tls: true if the channel is encrypted, false otherwise. 155# 156# Since: 0.14.0 157## 158{ 'struct': 'SpiceChannel', 159 'base': 'SpiceBasicInfo', 160 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 161 'tls': 'bool'}, 162 'if': 'defined(CONFIG_SPICE)' } 163 164## 165# @SpiceQueryMouseMode: 166# 167# An enumeration of Spice mouse states. 168# 169# @client: Mouse cursor position is determined by the client. 170# 171# @server: Mouse cursor position is determined by the server. 172# 173# @unknown: No information is available about mouse mode used by 174# the spice server. 175# 176# Note: spice/enums.h has a SpiceMouseMode already, hence the name. 177# 178# Since: 1.1 179## 180{ 'enum': 'SpiceQueryMouseMode', 181 'data': [ 'client', 'server', 'unknown' ], 182 'if': 'defined(CONFIG_SPICE)' } 183 184## 185# @SpiceInfo: 186# 187# Information about the SPICE session. 188# 189# @enabled: true if the SPICE server is enabled, false otherwise 190# 191# @migrated: true if the last guest migration completed and spice 192# migration had completed as well. false otherwise. (since 1.4) 193# 194# @host: The hostname the SPICE server is bound to. This depends on 195# the name resolution on the host and may be an IP address. 196# 197# @port: The SPICE server's port number. 198# 199# @compiled-version: SPICE server version. 200# 201# @tls-port: The SPICE server's TLS port number. 202# 203# @auth: the current authentication type used by the server 204# 'none' if no authentication is being used 205# 'spice' uses SASL or direct TLS authentication, depending on command 206# line options 207# 208# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can 209# be determined by the client or the server, or unknown if spice 210# server doesn't provide this information. (since: 1.1) 211# 212# @channels: a list of @SpiceChannel for each active spice channel 213# 214# Since: 0.14.0 215## 216{ 'struct': 'SpiceInfo', 217 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 218 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 219 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 220 'if': 'defined(CONFIG_SPICE)' } 221 222## 223# @query-spice: 224# 225# Returns information about the current SPICE server 226# 227# Returns: @SpiceInfo 228# 229# Since: 0.14.0 230# 231# Example: 232# 233# -> { "execute": "query-spice" } 234# <- { "return": { 235# "enabled": true, 236# "auth": "spice", 237# "port": 5920, 238# "tls-port": 5921, 239# "host": "0.0.0.0", 240# "channels": [ 241# { 242# "port": "54924", 243# "family": "ipv4", 244# "channel-type": 1, 245# "connection-id": 1804289383, 246# "host": "127.0.0.1", 247# "channel-id": 0, 248# "tls": true 249# }, 250# { 251# "port": "36710", 252# "family": "ipv4", 253# "channel-type": 4, 254# "connection-id": 1804289383, 255# "host": "127.0.0.1", 256# "channel-id": 0, 257# "tls": false 258# }, 259# [ ... more channels follow ... ] 260# ] 261# } 262# } 263# 264## 265{ 'command': 'query-spice', 'returns': 'SpiceInfo', 266 'if': 'defined(CONFIG_SPICE)' } 267 268## 269# @SPICE_CONNECTED: 270# 271# Emitted when a SPICE client establishes a connection 272# 273# @server: server information 274# 275# @client: client information 276# 277# Since: 0.14.0 278# 279# Example: 280# 281# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 282# "event": "SPICE_CONNECTED", 283# "data": { 284# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 285# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 286# }} 287# 288## 289{ 'event': 'SPICE_CONNECTED', 290 'data': { 'server': 'SpiceBasicInfo', 291 'client': 'SpiceBasicInfo' }, 292 'if': 'defined(CONFIG_SPICE)' } 293 294## 295# @SPICE_INITIALIZED: 296# 297# Emitted after initial handshake and authentication takes place (if any) 298# and the SPICE channel is up and running 299# 300# @server: server information 301# 302# @client: client information 303# 304# Since: 0.14.0 305# 306# Example: 307# 308# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 309# "event": "SPICE_INITIALIZED", 310# "data": {"server": {"auth": "spice", "port": "5921", 311# "family": "ipv4", "host": "127.0.0.1"}, 312# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 313# "connection-id": 1804289383, "host": "127.0.0.1", 314# "channel-id": 0, "tls": true} 315# }} 316# 317## 318{ 'event': 'SPICE_INITIALIZED', 319 'data': { 'server': 'SpiceServerInfo', 320 'client': 'SpiceChannel' }, 321 'if': 'defined(CONFIG_SPICE)' } 322 323## 324# @SPICE_DISCONNECTED: 325# 326# Emitted when the SPICE connection is closed 327# 328# @server: server information 329# 330# @client: client information 331# 332# Since: 0.14.0 333# 334# Example: 335# 336# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 337# "event": "SPICE_DISCONNECTED", 338# "data": { 339# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 340# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 341# }} 342# 343## 344{ 'event': 'SPICE_DISCONNECTED', 345 'data': { 'server': 'SpiceBasicInfo', 346 'client': 'SpiceBasicInfo' }, 347 'if': 'defined(CONFIG_SPICE)' } 348 349## 350# @SPICE_MIGRATE_COMPLETED: 351# 352# Emitted when SPICE migration has completed 353# 354# Since: 1.3 355# 356# Example: 357# 358# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 359# "event": "SPICE_MIGRATE_COMPLETED" } 360# 361## 362{ 'event': 'SPICE_MIGRATE_COMPLETED', 363 'if': 'defined(CONFIG_SPICE)' } 364 365## 366# == VNC 367## 368 369## 370# @VncBasicInfo: 371# 372# The basic information for vnc network connection 373# 374# @host: IP address 375# 376# @service: The service name of the vnc port. This may depend on the host 377# system's service database so symbolic names should not be relied 378# on. 379# 380# @family: address family 381# 382# @websocket: true in case the socket is a websocket (since 2.3). 383# 384# Since: 2.1 385## 386{ 'struct': 'VncBasicInfo', 387 'data': { 'host': 'str', 388 'service': 'str', 389 'family': 'NetworkAddressFamily', 390 'websocket': 'bool' }, 391 'if': 'defined(CONFIG_VNC)' } 392 393## 394# @VncServerInfo: 395# 396# The network connection information for server 397# 398# @auth: authentication method used for 399# the plain (non-websocket) VNC server 400# 401# Since: 2.1 402## 403{ 'struct': 'VncServerInfo', 404 'base': 'VncBasicInfo', 405 'data': { '*auth': 'str' }, 406 'if': 'defined(CONFIG_VNC)' } 407 408## 409# @VncClientInfo: 410# 411# Information about a connected VNC client. 412# 413# @x509_dname: If x509 authentication is in use, the Distinguished 414# Name of the client. 415# 416# @sasl_username: If SASL authentication is in use, the SASL username 417# used for authentication. 418# 419# Since: 0.14.0 420## 421{ 'struct': 'VncClientInfo', 422 'base': 'VncBasicInfo', 423 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 424 'if': 'defined(CONFIG_VNC)' } 425 426## 427# @VncInfo: 428# 429# Information about the VNC session. 430# 431# @enabled: true if the VNC server is enabled, false otherwise 432# 433# @host: The hostname the VNC server is bound to. This depends on 434# the name resolution on the host and may be an IP address. 435# 436# @family: 'ipv6' if the host is listening for IPv6 connections 437# 'ipv4' if the host is listening for IPv4 connections 438# 'unix' if the host is listening on a unix domain socket 439# 'unknown' otherwise 440# 441# @service: The service name of the server's port. This may depends 442# on the host system's service database so symbolic names should not 443# be relied on. 444# 445# @auth: the current authentication type used by the server 446# 'none' if no authentication is being used 447# 'vnc' if VNC authentication is being used 448# 'vencrypt+plain' if VEncrypt is used with plain text authentication 449# 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication 450# 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication 451# 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth 452# 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 453# 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 454# 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth 455# 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 456# 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth 457# 458# @clients: a list of @VncClientInfo of all currently connected clients 459# 460# Since: 0.14.0 461## 462{ 'struct': 'VncInfo', 463 'data': {'enabled': 'bool', '*host': 'str', 464 '*family': 'NetworkAddressFamily', 465 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 466 'if': 'defined(CONFIG_VNC)' } 467 468## 469# @VncPrimaryAuth: 470# 471# vnc primary authentication method. 472# 473# Since: 2.3 474## 475{ 'enum': 'VncPrimaryAuth', 476 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 477 'tls', 'vencrypt', 'sasl' ], 478 'if': 'defined(CONFIG_VNC)' } 479 480## 481# @VncVencryptSubAuth: 482# 483# vnc sub authentication method with vencrypt. 484# 485# Since: 2.3 486## 487{ 'enum': 'VncVencryptSubAuth', 488 'data': [ 'plain', 489 'tls-none', 'x509-none', 490 'tls-vnc', 'x509-vnc', 491 'tls-plain', 'x509-plain', 492 'tls-sasl', 'x509-sasl' ], 493 'if': 'defined(CONFIG_VNC)' } 494 495## 496# @VncServerInfo2: 497# 498# The network connection information for server 499# 500# @auth: The current authentication type used by the servers 501# 502# @vencrypt: The vencrypt sub authentication type used by the 503# servers, only specified in case auth == vencrypt. 504# 505# Since: 2.9 506## 507{ 'struct': 'VncServerInfo2', 508 'base': 'VncBasicInfo', 509 'data': { 'auth' : 'VncPrimaryAuth', 510 '*vencrypt' : 'VncVencryptSubAuth' }, 511 'if': 'defined(CONFIG_VNC)' } 512 513## 514# @VncInfo2: 515# 516# Information about a vnc server 517# 518# @id: vnc server name. 519# 520# @server: A list of @VncBasincInfo describing all listening sockets. 521# The list can be empty (in case the vnc server is disabled). 522# It also may have multiple entries: normal + websocket, 523# possibly also ipv4 + ipv6 in the future. 524# 525# @clients: A list of @VncClientInfo of all currently connected clients. 526# The list can be empty, for obvious reasons. 527# 528# @auth: The current authentication type used by the non-websockets servers 529# 530# @vencrypt: The vencrypt authentication type used by the servers, 531# only specified in case auth == vencrypt. 532# 533# @display: The display device the vnc server is linked to. 534# 535# Since: 2.3 536## 537{ 'struct': 'VncInfo2', 538 'data': { 'id' : 'str', 539 'server' : ['VncServerInfo2'], 540 'clients' : ['VncClientInfo'], 541 'auth' : 'VncPrimaryAuth', 542 '*vencrypt' : 'VncVencryptSubAuth', 543 '*display' : 'str' }, 544 'if': 'defined(CONFIG_VNC)' } 545 546## 547# @query-vnc: 548# 549# Returns information about the current VNC server 550# 551# Returns: @VncInfo 552# 553# Since: 0.14.0 554# 555# Example: 556# 557# -> { "execute": "query-vnc" } 558# <- { "return": { 559# "enabled":true, 560# "host":"0.0.0.0", 561# "service":"50402", 562# "auth":"vnc", 563# "family":"ipv4", 564# "clients":[ 565# { 566# "host":"127.0.0.1", 567# "service":"50401", 568# "family":"ipv4" 569# } 570# ] 571# } 572# } 573# 574## 575{ 'command': 'query-vnc', 'returns': 'VncInfo', 576 'if': 'defined(CONFIG_VNC)' } 577## 578# @query-vnc-servers: 579# 580# Returns a list of vnc servers. The list can be empty. 581# 582# Returns: a list of @VncInfo2 583# 584# Since: 2.3 585## 586{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 587 'if': 'defined(CONFIG_VNC)' } 588 589## 590# @change-vnc-password: 591# 592# Change the VNC server password. 593# 594# @password: the new password to use with VNC authentication 595# 596# Since: 1.1 597# 598# Notes: An empty password in this command will set the password to the empty 599# string. Existing clients are unaffected by executing this command. 600## 601{ 'command': 'change-vnc-password', 602 'data': { 'password': 'str' }, 603 'if': 'defined(CONFIG_VNC)' } 604 605## 606# @VNC_CONNECTED: 607# 608# Emitted when a VNC client establishes a connection 609# 610# @server: server information 611# 612# @client: client information 613# 614# Note: This event is emitted before any authentication takes place, thus 615# the authentication ID is not provided 616# 617# Since: 0.13.0 618# 619# Example: 620# 621# <- { "event": "VNC_CONNECTED", 622# "data": { 623# "server": { "auth": "sasl", "family": "ipv4", 624# "service": "5901", "host": "0.0.0.0" }, 625# "client": { "family": "ipv4", "service": "58425", 626# "host": "127.0.0.1" } }, 627# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 628# 629## 630{ 'event': 'VNC_CONNECTED', 631 'data': { 'server': 'VncServerInfo', 632 'client': 'VncBasicInfo' }, 633 'if': 'defined(CONFIG_VNC)' } 634 635## 636# @VNC_INITIALIZED: 637# 638# Emitted after authentication takes place (if any) and the VNC session is 639# made active 640# 641# @server: server information 642# 643# @client: client information 644# 645# Since: 0.13.0 646# 647# Example: 648# 649# <- { "event": "VNC_INITIALIZED", 650# "data": { 651# "server": { "auth": "sasl", "family": "ipv4", 652# "service": "5901", "host": "0.0.0.0"}, 653# "client": { "family": "ipv4", "service": "46089", 654# "host": "127.0.0.1", "sasl_username": "luiz" } }, 655# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 656# 657## 658{ 'event': 'VNC_INITIALIZED', 659 'data': { 'server': 'VncServerInfo', 660 'client': 'VncClientInfo' }, 661 'if': 'defined(CONFIG_VNC)' } 662 663## 664# @VNC_DISCONNECTED: 665# 666# Emitted when the connection is closed 667# 668# @server: server information 669# 670# @client: client information 671# 672# Since: 0.13.0 673# 674# Example: 675# 676# <- { "event": "VNC_DISCONNECTED", 677# "data": { 678# "server": { "auth": "sasl", "family": "ipv4", 679# "service": "5901", "host": "0.0.0.0" }, 680# "client": { "family": "ipv4", "service": "58425", 681# "host": "127.0.0.1", "sasl_username": "luiz" } }, 682# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 683# 684## 685{ 'event': 'VNC_DISCONNECTED', 686 'data': { 'server': 'VncServerInfo', 687 'client': 'VncClientInfo' }, 688 'if': 'defined(CONFIG_VNC)' } 689 690## 691# = Input 692## 693 694## 695# @MouseInfo: 696# 697# Information about a mouse device. 698# 699# @name: the name of the mouse device 700# 701# @index: the index of the mouse device 702# 703# @current: true if this device is currently receiving mouse events 704# 705# @absolute: true if this device supports absolute coordinates as input 706# 707# Since: 0.14.0 708## 709{ 'struct': 'MouseInfo', 710 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 711 'absolute': 'bool'} } 712 713## 714# @query-mice: 715# 716# Returns information about each active mouse device 717# 718# Returns: a list of @MouseInfo for each device 719# 720# Since: 0.14.0 721# 722# Example: 723# 724# -> { "execute": "query-mice" } 725# <- { "return": [ 726# { 727# "name":"QEMU Microsoft Mouse", 728# "index":0, 729# "current":false, 730# "absolute":false 731# }, 732# { 733# "name":"QEMU PS/2 Mouse", 734# "index":1, 735# "current":true, 736# "absolute":true 737# } 738# ] 739# } 740# 741## 742{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 743 744## 745# @QKeyCode: 746# 747# An enumeration of key name. 748# 749# This is used by the @send-key command. 750# 751# @unmapped: since 2.0 752# @pause: since 2.0 753# @ro: since 2.4 754# @kp_comma: since 2.4 755# @kp_equals: since 2.6 756# @power: since 2.6 757# @hiragana: since 2.9 758# @henkan: since 2.9 759# @yen: since 2.9 760# 761# @sleep: since 2.10 762# @wake: since 2.10 763# @audionext: since 2.10 764# @audioprev: since 2.10 765# @audiostop: since 2.10 766# @audioplay: since 2.10 767# @audiomute: since 2.10 768# @volumeup: since 2.10 769# @volumedown: since 2.10 770# @mediaselect: since 2.10 771# @mail: since 2.10 772# @calculator: since 2.10 773# @computer: since 2.10 774# @ac_home: since 2.10 775# @ac_back: since 2.10 776# @ac_forward: since 2.10 777# @ac_refresh: since 2.10 778# @ac_bookmarks: since 2.10 779# altgr, altgr_r: dropped in 2.10 780# 781# @muhenkan: since 2.12 782# @katakanahiragana: since 2.12 783# 784# 'sysrq' was mistakenly added to hack around the fact that 785# the ps2 driver was not generating correct scancodes sequences 786# when 'alt+print' was pressed. This flaw is now fixed and the 787# 'sysrq' key serves no further purpose. Any further use of 788# 'sysrq' will be transparently changed to 'print', so they 789# are effectively synonyms. 790# 791# Since: 1.3.0 792# 793## 794{ 'enum': 'QKeyCode', 795 'data': [ 'unmapped', 796 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 797 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 798 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 799 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 800 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 801 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 802 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 803 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 804 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 805 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 806 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 807 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 808 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 809 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 810 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 811 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 812 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 813 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 814 'volumeup', 'volumedown', 'mediaselect', 815 'mail', 'calculator', 'computer', 816 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] } 817 818## 819# @KeyValue: 820# 821# Represents a keyboard key. 822# 823# Since: 1.3.0 824## 825{ 'union': 'KeyValue', 826 'data': { 827 'number': 'int', 828 'qcode': 'QKeyCode' } } 829 830## 831# @send-key: 832# 833# Send keys to guest. 834# 835# @keys: An array of @KeyValue elements. All @KeyValues in this array are 836# simultaneously sent to the guest. A @KeyValue.number value is sent 837# directly to the guest, while @KeyValue.qcode must be a valid 838# @QKeyCode value 839# 840# @hold-time: time to delay key up events, milliseconds. Defaults 841# to 100 842# 843# Returns: Nothing on success 844# If key is unknown or redundant, InvalidParameter 845# 846# Since: 1.3.0 847# 848# Example: 849# 850# -> { "execute": "send-key", 851# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 852# { "type": "qcode", "data": "alt" }, 853# { "type": "qcode", "data": "delete" } ] } } 854# <- { "return": {} } 855# 856## 857{ 'command': 'send-key', 858 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 859 860## 861# @InputButton: 862# 863# Button of a pointer input device (mouse, tablet). 864# 865# @side: front side button of a 5-button mouse (since 2.9) 866# 867# @extra: rear side button of a 5-button mouse (since 2.9) 868# 869# Since: 2.0 870## 871{ 'enum' : 'InputButton', 872 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 873 'extra' ] } 874 875## 876# @InputAxis: 877# 878# Position axis of a pointer input device (mouse, tablet). 879# 880# Since: 2.0 881## 882{ 'enum' : 'InputAxis', 883 'data' : [ 'x', 'y' ] } 884 885## 886# @InputKeyEvent: 887# 888# Keyboard input event. 889# 890# @key: Which key this event is for. 891# @down: True for key-down and false for key-up events. 892# 893# Since: 2.0 894## 895{ 'struct' : 'InputKeyEvent', 896 'data' : { 'key' : 'KeyValue', 897 'down' : 'bool' } } 898 899## 900# @InputBtnEvent: 901# 902# Pointer button input event. 903# 904# @button: Which button this event is for. 905# @down: True for key-down and false for key-up events. 906# 907# Since: 2.0 908## 909{ 'struct' : 'InputBtnEvent', 910 'data' : { 'button' : 'InputButton', 911 'down' : 'bool' } } 912 913## 914# @InputMoveEvent: 915# 916# Pointer motion input event. 917# 918# @axis: Which axis is referenced by @value. 919# @value: Pointer position. For absolute coordinates the 920# valid range is 0 -> 0x7ffff 921# 922# Since: 2.0 923## 924{ 'struct' : 'InputMoveEvent', 925 'data' : { 'axis' : 'InputAxis', 926 'value' : 'int' } } 927 928## 929# @InputEvent: 930# 931# Input event union. 932# 933# @type: the input type, one of: 934# - 'key': Input event of Keyboard 935# - 'btn': Input event of pointer buttons 936# - 'rel': Input event of relative pointer motion 937# - 'abs': Input event of absolute pointer motion 938# 939# Since: 2.0 940## 941{ 'union' : 'InputEvent', 942 'data' : { 'key' : 'InputKeyEvent', 943 'btn' : 'InputBtnEvent', 944 'rel' : 'InputMoveEvent', 945 'abs' : 'InputMoveEvent' } } 946 947## 948# @input-send-event: 949# 950# Send input event(s) to guest. 951# 952# @device: display device to send event(s) to. 953# @head: head to send event(s) to, in case the 954# display device supports multiple scanouts. 955# @events: List of InputEvent union. 956# 957# Returns: Nothing on success. 958# 959# The @device and @head parameters can be used to send the input event 960# to specific input devices in case (a) multiple input devices of the 961# same kind are added to the virtual machine and (b) you have 962# configured input routing (see docs/multiseat.txt) for those input 963# devices. The parameters work exactly like the device and head 964# properties of input devices. If @device is missing, only devices 965# that have no input routing config are admissible. If @device is 966# specified, both input devices with and without input routing config 967# are admissible, but devices with input routing config take 968# precedence. 969# 970# Since: 2.6 971# 972# Note: The consoles are visible in the qom tree, under 973# /backend/console[$index]. They have a device link and head property, 974# so it is possible to map which console belongs to which device and 975# display. 976# 977# Example: 978# 979# 1. Press left mouse button. 980# 981# -> { "execute": "input-send-event", 982# "arguments": { "device": "video0", 983# "events": [ { "type": "btn", 984# "data" : { "down": true, "button": "left" } } ] } } 985# <- { "return": {} } 986# 987# -> { "execute": "input-send-event", 988# "arguments": { "device": "video0", 989# "events": [ { "type": "btn", 990# "data" : { "down": false, "button": "left" } } ] } } 991# <- { "return": {} } 992# 993# 2. Press ctrl-alt-del. 994# 995# -> { "execute": "input-send-event", 996# "arguments": { "events": [ 997# { "type": "key", "data" : { "down": true, 998# "key": {"type": "qcode", "data": "ctrl" } } }, 999# { "type": "key", "data" : { "down": true, 1000# "key": {"type": "qcode", "data": "alt" } } }, 1001# { "type": "key", "data" : { "down": true, 1002# "key": {"type": "qcode", "data": "delete" } } } ] } } 1003# <- { "return": {} } 1004# 1005# 3. Move mouse pointer to absolute coordinates (20000, 400). 1006# 1007# -> { "execute": "input-send-event" , 1008# "arguments": { "events": [ 1009# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1010# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1011# <- { "return": {} } 1012# 1013## 1014{ 'command': 'input-send-event', 1015 'data': { '*device': 'str', 1016 '*head' : 'int', 1017 'events' : [ 'InputEvent' ] } } 1018 1019## 1020# @GrabToggleKeys: 1021# 1022# Keys to toggle input-linux between host and guest. 1023# 1024# Since: 4.0 1025# 1026## 1027{ 'enum': 'GrabToggleKeys', 1028 'data': [ 'ctrl-ctrl', 'alt-alt', 'shift-shift','meta-meta', 'scrolllock', 1029 'ctrl-scrolllock' ] } 1030 1031## 1032# @DisplayGTK: 1033# 1034# GTK display options. 1035# 1036# @grab-on-hover: Grab keyboard input on mouse hover. 1037# @zoom-to-fit: Zoom guest display to fit into the host window. When 1038# turned off the host window will be resized instead. 1039# In case the display device can notify the guest on 1040# window resizes (virtio-gpu) this will default to "on", 1041# assuming the guest will resize the display to match 1042# the window size then. Otherwise it defaults to "off". 1043# Since 3.1 1044# 1045# Since: 2.12 1046# 1047## 1048{ 'struct' : 'DisplayGTK', 1049 'data' : { '*grab-on-hover' : 'bool', 1050 '*zoom-to-fit' : 'bool' } } 1051 1052## 1053# @DisplayEGLHeadless: 1054# 1055# EGL headless display options. 1056# 1057# @rendernode: Which DRM render node should be used. Default is the first 1058# available node on the host. 1059# 1060# Since: 3.1 1061# 1062## 1063{ 'struct' : 'DisplayEGLHeadless', 1064 'data' : { '*rendernode' : 'str' } } 1065 1066 ## 1067 # @DisplayGLMode: 1068 # 1069 # Display OpenGL mode. 1070 # 1071 # @off: Disable OpenGL (default). 1072 # @on: Use OpenGL, pick context type automatically. 1073 # Would better be named 'auto' but is called 'on' for backward 1074 # compatibility with bool type. 1075 # @core: Use OpenGL with Core (desktop) Context. 1076 # @es: Use OpenGL with ES (embedded systems) Context. 1077 # 1078 # Since: 3.0 1079 # 1080 ## 1081 { 'enum' : 'DisplayGLMode', 1082 'data' : [ 'off', 'on', 'core', 'es' ] } 1083 1084## 1085# @DisplayCurses: 1086# 1087# Curses display options. 1088# 1089# @charset: Font charset used by guest (default: CP437). 1090# 1091# Since: 4.0 1092# 1093## 1094{ 'struct' : 'DisplayCurses', 1095 'data' : { '*charset' : 'str' } } 1096 1097## 1098# @DisplayType: 1099# 1100# Display (user interface) type. 1101# 1102# @default: The default user interface, selecting from the first available 1103# of gtk, sdl, cocoa, and vnc. 1104# 1105# @none: No user interface or video output display. The guest will 1106# still see an emulated graphics card, but its output will not 1107# be displayed to the QEMU user. 1108# 1109# @gtk: The GTK user interface. 1110# 1111# @sdl: The SDL user interface. 1112# 1113# @egl-headless: No user interface, offload GL operations to a local 1114# DRI device. Graphical display need to be paired with 1115# VNC or Spice. (Since 3.1) 1116# 1117# @curses: Display video output via curses. For graphics device 1118# models which support a text mode, QEMU can display this 1119# output using a curses/ncurses interface. Nothing is 1120# displayed when the graphics device is in graphical mode or 1121# if the graphics device does not support a text 1122# mode. Generally only the VGA device models support text 1123# mode. 1124# 1125# @cocoa: The Cocoa user interface. 1126# 1127# @spice-app: Set up a Spice server and run the default associated 1128# application to connect to it. The server will redirect 1129# the serial console and QEMU monitors. (Since 4.0) 1130# 1131# Since: 2.12 1132# 1133## 1134{ 'enum' : 'DisplayType', 1135 'data' : [ 'default', 'none', 'gtk', 'sdl', 1136 'egl-headless', 'curses', 'cocoa', 1137 'spice-app'] } 1138 1139## 1140# @DisplayOptions: 1141# 1142# Display (user interface) options. 1143# 1144# @type: Which DisplayType qemu should use. 1145# @full-screen: Start user interface in fullscreen mode (default: off). 1146# @window-close: Allow to quit qemu with window close button (default: on). 1147# @show-cursor: Force showing the mouse cursor (default: off). 1148# (since: 5.0) 1149# @gl: Enable OpenGL support (default: off). 1150# 1151# Since: 2.12 1152# 1153## 1154{ 'union' : 'DisplayOptions', 1155 'base' : { 'type' : 'DisplayType', 1156 '*full-screen' : 'bool', 1157 '*window-close' : 'bool', 1158 '*show-cursor' : 'bool', 1159 '*gl' : 'DisplayGLMode' }, 1160 'discriminator' : 'type', 1161 'data' : { 'gtk' : 'DisplayGTK', 1162 'curses' : 'DisplayCurses', 1163 'egl-headless' : 'DisplayEGLHeadless'} } 1164 1165## 1166# @query-display-options: 1167# 1168# Returns information about display configuration 1169# 1170# Returns: @DisplayOptions 1171# 1172# Since: 3.1 1173# 1174## 1175{ 'command': 'query-display-options', 1176 'returns': 'DisplayOptions' } 1177