1# -*- Mode: Python -*- 2# 3 4## 5# = Remote desktop 6## 7 8{ 'include': 'sockets.json' } 9 10## 11# @set_password: 12# 13# Sets the password of a remote display session. 14# 15# @protocol: `vnc' to modify the VNC server password 16# `spice' to modify the Spice server password 17# 18# @password: the new password 19# 20# @connected: how to handle existing clients when changing the 21# password. If nothing is specified, defaults to `keep' 22# `fail' to fail the command if clients are connected 23# `disconnect' to disconnect existing clients 24# `keep' to maintain existing clients 25# 26# Returns: Nothing on success 27# If Spice is not enabled, DeviceNotFound 28# 29# Since: 0.14.0 30# 31# Example: 32# 33# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 34# "password": "secret" } } 35# <- { "return": {} } 36# 37## 38{ 'command': 'set_password', 39 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } 40 41## 42# @expire_password: 43# 44# Expire the password of a remote display server. 45# 46# @protocol: the name of the remote display protocol `vnc' or `spice' 47# 48# @time: when to expire the password. 49# `now' to expire the password immediately 50# `never' to cancel password expiration 51# `+INT' where INT is the number of seconds from now (integer) 52# `INT' where INT is the absolute time in seconds 53# 54# Returns: Nothing on success 55# If @protocol is `spice' and Spice is not active, DeviceNotFound 56# 57# Since: 0.14.0 58# 59# Notes: Time is relative to the server and currently there is no way to 60# coordinate server time with client time. It is not recommended to 61# use the absolute time version of the @time parameter unless you're 62# sure you are on the same machine as the QEMU instance. 63# 64# Example: 65# 66# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 67# "time": "+60" } } 68# <- { "return": {} } 69# 70## 71{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } 72 73## 74# @screendump: 75# 76# Write a PPM of the VGA screen to a file. 77# 78# @filename: the path of a new PPM file to store the image 79# 80# @device: ID of the display device that should be dumped. If this parameter 81# is missing, the primary display will be used. (Since 2.12) 82# 83# @head: head to use in case the device supports multiple heads. If this 84# parameter is missing, head #0 will be used. Also note that the head 85# can only be specified in conjunction with the device ID. (Since 2.12) 86# 87# Returns: Nothing on success 88# 89# Since: 0.14.0 90# 91# Example: 92# 93# -> { "execute": "screendump", 94# "arguments": { "filename": "/tmp/image" } } 95# <- { "return": {} } 96# 97## 98{ 'command': 'screendump', 99 'data': {'filename': 'str', '*device': 'str', '*head': 'int'} } 100 101## 102# == Spice 103## 104 105## 106# @SpiceBasicInfo: 107# 108# The basic information for SPICE network connection 109# 110# @host: IP address 111# 112# @port: port number 113# 114# @family: address family 115# 116# Since: 2.1 117## 118{ 'struct': 'SpiceBasicInfo', 119 'data': { 'host': 'str', 120 'port': 'str', 121 'family': 'NetworkAddressFamily' }, 122 'if': 'defined(CONFIG_SPICE)' } 123 124## 125# @SpiceServerInfo: 126# 127# Information about a SPICE server 128# 129# @auth: authentication method 130# 131# Since: 2.1 132## 133{ 'struct': 'SpiceServerInfo', 134 'base': 'SpiceBasicInfo', 135 'data': { '*auth': 'str' }, 136 'if': 'defined(CONFIG_SPICE)' } 137 138## 139# @SpiceChannel: 140# 141# Information about a SPICE client channel. 142# 143# @connection-id: SPICE connection id number. All channels with the same id 144# belong to the same SPICE session. 145# 146# @channel-type: SPICE channel type number. "1" is the main control 147# channel, filter for this one if you want to track spice 148# sessions only 149# 150# @channel-id: SPICE channel ID number. Usually "0", might be different when 151# multiple channels of the same type exist, such as multiple 152# display channels in a multihead setup 153# 154# @tls: true if the channel is encrypted, false otherwise. 155# 156# Since: 0.14.0 157## 158{ 'struct': 'SpiceChannel', 159 'base': 'SpiceBasicInfo', 160 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 161 'tls': 'bool'}, 162 'if': 'defined(CONFIG_SPICE)' } 163 164## 165# @SpiceQueryMouseMode: 166# 167# An enumeration of Spice mouse states. 168# 169# @client: Mouse cursor position is determined by the client. 170# 171# @server: Mouse cursor position is determined by the server. 172# 173# @unknown: No information is available about mouse mode used by 174# the spice server. 175# 176# Note: spice/enums.h has a SpiceMouseMode already, hence the name. 177# 178# Since: 1.1 179## 180{ 'enum': 'SpiceQueryMouseMode', 181 'data': [ 'client', 'server', 'unknown' ], 182 'if': 'defined(CONFIG_SPICE)' } 183 184## 185# @SpiceInfo: 186# 187# Information about the SPICE session. 188# 189# @enabled: true if the SPICE server is enabled, false otherwise 190# 191# @migrated: true if the last guest migration completed and spice 192# migration had completed as well. false otherwise. (since 1.4) 193# 194# @host: The hostname the SPICE server is bound to. This depends on 195# the name resolution on the host and may be an IP address. 196# 197# @port: The SPICE server's port number. 198# 199# @compiled-version: SPICE server version. 200# 201# @tls-port: The SPICE server's TLS port number. 202# 203# @auth: the current authentication type used by the server 204# 'none' if no authentication is being used 205# 'spice' uses SASL or direct TLS authentication, depending on command 206# line options 207# 208# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can 209# be determined by the client or the server, or unknown if spice 210# server doesn't provide this information. (since: 1.1) 211# 212# @channels: a list of @SpiceChannel for each active spice channel 213# 214# Since: 0.14.0 215## 216{ 'struct': 'SpiceInfo', 217 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 218 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 219 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 220 'if': 'defined(CONFIG_SPICE)' } 221 222## 223# @query-spice: 224# 225# Returns information about the current SPICE server 226# 227# Returns: @SpiceInfo 228# 229# Since: 0.14.0 230# 231# Example: 232# 233# -> { "execute": "query-spice" } 234# <- { "return": { 235# "enabled": true, 236# "auth": "spice", 237# "port": 5920, 238# "tls-port": 5921, 239# "host": "0.0.0.0", 240# "channels": [ 241# { 242# "port": "54924", 243# "family": "ipv4", 244# "channel-type": 1, 245# "connection-id": 1804289383, 246# "host": "127.0.0.1", 247# "channel-id": 0, 248# "tls": true 249# }, 250# { 251# "port": "36710", 252# "family": "ipv4", 253# "channel-type": 4, 254# "connection-id": 1804289383, 255# "host": "127.0.0.1", 256# "channel-id": 0, 257# "tls": false 258# }, 259# [ ... more channels follow ... ] 260# ] 261# } 262# } 263# 264## 265{ 'command': 'query-spice', 'returns': 'SpiceInfo', 266 'if': 'defined(CONFIG_SPICE)' } 267 268## 269# @SPICE_CONNECTED: 270# 271# Emitted when a SPICE client establishes a connection 272# 273# @server: server information 274# 275# @client: client information 276# 277# Since: 0.14.0 278# 279# Example: 280# 281# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 282# "event": "SPICE_CONNECTED", 283# "data": { 284# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 285# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 286# }} 287# 288## 289{ 'event': 'SPICE_CONNECTED', 290 'data': { 'server': 'SpiceBasicInfo', 291 'client': 'SpiceBasicInfo' }, 292 'if': 'defined(CONFIG_SPICE)' } 293 294## 295# @SPICE_INITIALIZED: 296# 297# Emitted after initial handshake and authentication takes place (if any) 298# and the SPICE channel is up and running 299# 300# @server: server information 301# 302# @client: client information 303# 304# Since: 0.14.0 305# 306# Example: 307# 308# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 309# "event": "SPICE_INITIALIZED", 310# "data": {"server": {"auth": "spice", "port": "5921", 311# "family": "ipv4", "host": "127.0.0.1"}, 312# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 313# "connection-id": 1804289383, "host": "127.0.0.1", 314# "channel-id": 0, "tls": true} 315# }} 316# 317## 318{ 'event': 'SPICE_INITIALIZED', 319 'data': { 'server': 'SpiceServerInfo', 320 'client': 'SpiceChannel' }, 321 'if': 'defined(CONFIG_SPICE)' } 322 323## 324# @SPICE_DISCONNECTED: 325# 326# Emitted when the SPICE connection is closed 327# 328# @server: server information 329# 330# @client: client information 331# 332# Since: 0.14.0 333# 334# Example: 335# 336# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 337# "event": "SPICE_DISCONNECTED", 338# "data": { 339# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 340# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 341# }} 342# 343## 344{ 'event': 'SPICE_DISCONNECTED', 345 'data': { 'server': 'SpiceBasicInfo', 346 'client': 'SpiceBasicInfo' }, 347 'if': 'defined(CONFIG_SPICE)' } 348 349## 350# @SPICE_MIGRATE_COMPLETED: 351# 352# Emitted when SPICE migration has completed 353# 354# Since: 1.3 355# 356# Example: 357# 358# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 359# "event": "SPICE_MIGRATE_COMPLETED" } 360# 361## 362{ 'event': 'SPICE_MIGRATE_COMPLETED', 363 'if': 'defined(CONFIG_SPICE)' } 364 365## 366# == VNC 367## 368 369## 370# @VncBasicInfo: 371# 372# The basic information for vnc network connection 373# 374# @host: IP address 375# 376# @service: The service name of the vnc port. This may depend on the host 377# system's service database so symbolic names should not be relied 378# on. 379# 380# @family: address family 381# 382# @websocket: true in case the socket is a websocket (since 2.3). 383# 384# Since: 2.1 385## 386{ 'struct': 'VncBasicInfo', 387 'data': { 'host': 'str', 388 'service': 'str', 389 'family': 'NetworkAddressFamily', 390 'websocket': 'bool' }, 391 'if': 'defined(CONFIG_VNC)' } 392 393## 394# @VncServerInfo: 395# 396# The network connection information for server 397# 398# @auth: authentication method used for 399# the plain (non-websocket) VNC server 400# 401# Since: 2.1 402## 403{ 'struct': 'VncServerInfo', 404 'base': 'VncBasicInfo', 405 'data': { '*auth': 'str' }, 406 'if': 'defined(CONFIG_VNC)' } 407 408## 409# @VncClientInfo: 410# 411# Information about a connected VNC client. 412# 413# @x509_dname: If x509 authentication is in use, the Distinguished 414# Name of the client. 415# 416# @sasl_username: If SASL authentication is in use, the SASL username 417# used for authentication. 418# 419# Since: 0.14.0 420## 421{ 'struct': 'VncClientInfo', 422 'base': 'VncBasicInfo', 423 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 424 'if': 'defined(CONFIG_VNC)' } 425 426## 427# @VncInfo: 428# 429# Information about the VNC session. 430# 431# @enabled: true if the VNC server is enabled, false otherwise 432# 433# @host: The hostname the VNC server is bound to. This depends on 434# the name resolution on the host and may be an IP address. 435# 436# @family: 'ipv6' if the host is listening for IPv6 connections 437# 'ipv4' if the host is listening for IPv4 connections 438# 'unix' if the host is listening on a unix domain socket 439# 'unknown' otherwise 440# 441# @service: The service name of the server's port. This may depends 442# on the host system's service database so symbolic names should not 443# be relied on. 444# 445# @auth: the current authentication type used by the server 446# 'none' if no authentication is being used 447# 'vnc' if VNC authentication is being used 448# 'vencrypt+plain' if VEncrypt is used with plain text authentication 449# 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication 450# 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication 451# 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth 452# 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 453# 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 454# 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth 455# 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 456# 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth 457# 458# @clients: a list of @VncClientInfo of all currently connected clients 459# 460# Since: 0.14.0 461## 462{ 'struct': 'VncInfo', 463 'data': {'enabled': 'bool', '*host': 'str', 464 '*family': 'NetworkAddressFamily', 465 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 466 'if': 'defined(CONFIG_VNC)' } 467 468## 469# @VncPrimaryAuth: 470# 471# vnc primary authentication method. 472# 473# Since: 2.3 474## 475{ 'enum': 'VncPrimaryAuth', 476 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 477 'tls', 'vencrypt', 'sasl' ], 478 'if': 'defined(CONFIG_VNC)' } 479 480## 481# @VncVencryptSubAuth: 482# 483# vnc sub authentication method with vencrypt. 484# 485# Since: 2.3 486## 487{ 'enum': 'VncVencryptSubAuth', 488 'data': [ 'plain', 489 'tls-none', 'x509-none', 490 'tls-vnc', 'x509-vnc', 491 'tls-plain', 'x509-plain', 492 'tls-sasl', 'x509-sasl' ], 493 'if': 'defined(CONFIG_VNC)' } 494 495## 496# @VncServerInfo2: 497# 498# The network connection information for server 499# 500# @auth: The current authentication type used by the servers 501# 502# @vencrypt: The vencrypt sub authentication type used by the 503# servers, only specified in case auth == vencrypt. 504# 505# Since: 2.9 506## 507{ 'struct': 'VncServerInfo2', 508 'base': 'VncBasicInfo', 509 'data': { 'auth' : 'VncPrimaryAuth', 510 '*vencrypt' : 'VncVencryptSubAuth' }, 511 'if': 'defined(CONFIG_VNC)' } 512 513## 514# @VncInfo2: 515# 516# Information about a vnc server 517# 518# @id: vnc server name. 519# 520# @server: A list of @VncBasincInfo describing all listening sockets. 521# The list can be empty (in case the vnc server is disabled). 522# It also may have multiple entries: normal + websocket, 523# possibly also ipv4 + ipv6 in the future. 524# 525# @clients: A list of @VncClientInfo of all currently connected clients. 526# The list can be empty, for obvious reasons. 527# 528# @auth: The current authentication type used by the non-websockets servers 529# 530# @vencrypt: The vencrypt authentication type used by the servers, 531# only specified in case auth == vencrypt. 532# 533# @display: The display device the vnc server is linked to. 534# 535# Since: 2.3 536## 537{ 'struct': 'VncInfo2', 538 'data': { 'id' : 'str', 539 'server' : ['VncServerInfo2'], 540 'clients' : ['VncClientInfo'], 541 'auth' : 'VncPrimaryAuth', 542 '*vencrypt' : 'VncVencryptSubAuth', 543 '*display' : 'str' }, 544 'if': 'defined(CONFIG_VNC)' } 545 546## 547# @query-vnc: 548# 549# Returns information about the current VNC server 550# 551# Returns: @VncInfo 552# 553# Since: 0.14.0 554# 555# Example: 556# 557# -> { "execute": "query-vnc" } 558# <- { "return": { 559# "enabled":true, 560# "host":"0.0.0.0", 561# "service":"50402", 562# "auth":"vnc", 563# "family":"ipv4", 564# "clients":[ 565# { 566# "host":"127.0.0.1", 567# "service":"50401", 568# "family":"ipv4" 569# } 570# ] 571# } 572# } 573# 574## 575{ 'command': 'query-vnc', 'returns': 'VncInfo', 576 'if': 'defined(CONFIG_VNC)' } 577## 578# @query-vnc-servers: 579# 580# Returns a list of vnc servers. The list can be empty. 581# 582# Returns: a list of @VncInfo2 583# 584# Since: 2.3 585## 586{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 587 'if': 'defined(CONFIG_VNC)' } 588 589## 590# @change-vnc-password: 591# 592# Change the VNC server password. 593# 594# @password: the new password to use with VNC authentication 595# 596# Since: 1.1 597# 598# Notes: An empty password in this command will set the password to the empty 599# string. Existing clients are unaffected by executing this command. 600## 601{ 'command': 'change-vnc-password', 'data': {'password': 'str'}, 602 'if': 'defined(CONFIG_VNC)' } 603 604## 605# @VNC_CONNECTED: 606# 607# Emitted when a VNC client establishes a connection 608# 609# @server: server information 610# 611# @client: client information 612# 613# Note: This event is emitted before any authentication takes place, thus 614# the authentication ID is not provided 615# 616# Since: 0.13.0 617# 618# Example: 619# 620# <- { "event": "VNC_CONNECTED", 621# "data": { 622# "server": { "auth": "sasl", "family": "ipv4", 623# "service": "5901", "host": "0.0.0.0" }, 624# "client": { "family": "ipv4", "service": "58425", 625# "host": "127.0.0.1" } }, 626# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 627# 628## 629{ 'event': 'VNC_CONNECTED', 630 'data': { 'server': 'VncServerInfo', 631 'client': 'VncBasicInfo' }, 632 'if': 'defined(CONFIG_VNC)' } 633 634## 635# @VNC_INITIALIZED: 636# 637# Emitted after authentication takes place (if any) and the VNC session is 638# made active 639# 640# @server: server information 641# 642# @client: client information 643# 644# Since: 0.13.0 645# 646# Example: 647# 648# <- { "event": "VNC_INITIALIZED", 649# "data": { 650# "server": { "auth": "sasl", "family": "ipv4", 651# "service": "5901", "host": "0.0.0.0"}, 652# "client": { "family": "ipv4", "service": "46089", 653# "host": "127.0.0.1", "sasl_username": "luiz" } }, 654# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 655# 656## 657{ 'event': 'VNC_INITIALIZED', 658 'data': { 'server': 'VncServerInfo', 659 'client': 'VncClientInfo' }, 660 'if': 'defined(CONFIG_VNC)' } 661 662## 663# @VNC_DISCONNECTED: 664# 665# Emitted when the connection is closed 666# 667# @server: server information 668# 669# @client: client information 670# 671# Since: 0.13.0 672# 673# Example: 674# 675# <- { "event": "VNC_DISCONNECTED", 676# "data": { 677# "server": { "auth": "sasl", "family": "ipv4", 678# "service": "5901", "host": "0.0.0.0" }, 679# "client": { "family": "ipv4", "service": "58425", 680# "host": "127.0.0.1", "sasl_username": "luiz" } }, 681# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 682# 683## 684{ 'event': 'VNC_DISCONNECTED', 685 'data': { 'server': 'VncServerInfo', 686 'client': 'VncClientInfo' }, 687 'if': 'defined(CONFIG_VNC)' } 688 689## 690# = Input 691## 692 693## 694# @MouseInfo: 695# 696# Information about a mouse device. 697# 698# @name: the name of the mouse device 699# 700# @index: the index of the mouse device 701# 702# @current: true if this device is currently receiving mouse events 703# 704# @absolute: true if this device supports absolute coordinates as input 705# 706# Since: 0.14.0 707## 708{ 'struct': 'MouseInfo', 709 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 710 'absolute': 'bool'} } 711 712## 713# @query-mice: 714# 715# Returns information about each active mouse device 716# 717# Returns: a list of @MouseInfo for each device 718# 719# Since: 0.14.0 720# 721# Example: 722# 723# -> { "execute": "query-mice" } 724# <- { "return": [ 725# { 726# "name":"QEMU Microsoft Mouse", 727# "index":0, 728# "current":false, 729# "absolute":false 730# }, 731# { 732# "name":"QEMU PS/2 Mouse", 733# "index":1, 734# "current":true, 735# "absolute":true 736# } 737# ] 738# } 739# 740## 741{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 742 743## 744# @QKeyCode: 745# 746# An enumeration of key name. 747# 748# This is used by the @send-key command. 749# 750# @unmapped: since 2.0 751# @pause: since 2.0 752# @ro: since 2.4 753# @kp_comma: since 2.4 754# @kp_equals: since 2.6 755# @power: since 2.6 756# @hiragana: since 2.9 757# @henkan: since 2.9 758# @yen: since 2.9 759# 760# @sleep: since 2.10 761# @wake: since 2.10 762# @audionext: since 2.10 763# @audioprev: since 2.10 764# @audiostop: since 2.10 765# @audioplay: since 2.10 766# @audiomute: since 2.10 767# @volumeup: since 2.10 768# @volumedown: since 2.10 769# @mediaselect: since 2.10 770# @mail: since 2.10 771# @calculator: since 2.10 772# @computer: since 2.10 773# @ac_home: since 2.10 774# @ac_back: since 2.10 775# @ac_forward: since 2.10 776# @ac_refresh: since 2.10 777# @ac_bookmarks: since 2.10 778# altgr, altgr_r: dropped in 2.10 779# 780# @muhenkan: since 2.12 781# @katakanahiragana: since 2.12 782# 783# 'sysrq' was mistakenly added to hack around the fact that 784# the ps2 driver was not generating correct scancodes sequences 785# when 'alt+print' was pressed. This flaw is now fixed and the 786# 'sysrq' key serves no further purpose. Any further use of 787# 'sysrq' will be transparently changed to 'print', so they 788# are effectively synonyms. 789# 790# Since: 1.3.0 791# 792## 793{ 'enum': 'QKeyCode', 794 'data': [ 'unmapped', 795 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 796 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 797 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 798 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 799 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 800 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 801 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 802 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 803 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 804 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 805 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 806 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 807 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 808 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 809 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 810 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 811 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 812 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 813 'volumeup', 'volumedown', 'mediaselect', 814 'mail', 'calculator', 'computer', 815 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] } 816 817## 818# @KeyValue: 819# 820# Represents a keyboard key. 821# 822# Since: 1.3.0 823## 824{ 'union': 'KeyValue', 825 'data': { 826 'number': 'int', 827 'qcode': 'QKeyCode' } } 828 829## 830# @send-key: 831# 832# Send keys to guest. 833# 834# @keys: An array of @KeyValue elements. All @KeyValues in this array are 835# simultaneously sent to the guest. A @KeyValue.number value is sent 836# directly to the guest, while @KeyValue.qcode must be a valid 837# @QKeyCode value 838# 839# @hold-time: time to delay key up events, milliseconds. Defaults 840# to 100 841# 842# Returns: Nothing on success 843# If key is unknown or redundant, InvalidParameter 844# 845# Since: 1.3.0 846# 847# Example: 848# 849# -> { "execute": "send-key", 850# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 851# { "type": "qcode", "data": "alt" }, 852# { "type": "qcode", "data": "delete" } ] } } 853# <- { "return": {} } 854# 855## 856{ 'command': 'send-key', 857 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 858 859## 860# @InputButton: 861# 862# Button of a pointer input device (mouse, tablet). 863# 864# @side: front side button of a 5-button mouse (since 2.9) 865# 866# @extra: rear side button of a 5-button mouse (since 2.9) 867# 868# Since: 2.0 869## 870{ 'enum' : 'InputButton', 871 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 872 'extra' ] } 873 874## 875# @InputAxis: 876# 877# Position axis of a pointer input device (mouse, tablet). 878# 879# Since: 2.0 880## 881{ 'enum' : 'InputAxis', 882 'data' : [ 'x', 'y' ] } 883 884## 885# @InputKeyEvent: 886# 887# Keyboard input event. 888# 889# @key: Which key this event is for. 890# @down: True for key-down and false for key-up events. 891# 892# Since: 2.0 893## 894{ 'struct' : 'InputKeyEvent', 895 'data' : { 'key' : 'KeyValue', 896 'down' : 'bool' } } 897 898## 899# @InputBtnEvent: 900# 901# Pointer button input event. 902# 903# @button: Which button this event is for. 904# @down: True for key-down and false for key-up events. 905# 906# Since: 2.0 907## 908{ 'struct' : 'InputBtnEvent', 909 'data' : { 'button' : 'InputButton', 910 'down' : 'bool' } } 911 912## 913# @InputMoveEvent: 914# 915# Pointer motion input event. 916# 917# @axis: Which axis is referenced by @value. 918# @value: Pointer position. For absolute coordinates the 919# valid range is 0 -> 0x7ffff 920# 921# Since: 2.0 922## 923{ 'struct' : 'InputMoveEvent', 924 'data' : { 'axis' : 'InputAxis', 925 'value' : 'int' } } 926 927## 928# @InputEvent: 929# 930# Input event union. 931# 932# @type: the input type, one of: 933# - 'key': Input event of Keyboard 934# - 'btn': Input event of pointer buttons 935# - 'rel': Input event of relative pointer motion 936# - 'abs': Input event of absolute pointer motion 937# 938# Since: 2.0 939## 940{ 'union' : 'InputEvent', 941 'data' : { 'key' : 'InputKeyEvent', 942 'btn' : 'InputBtnEvent', 943 'rel' : 'InputMoveEvent', 944 'abs' : 'InputMoveEvent' } } 945 946## 947# @input-send-event: 948# 949# Send input event(s) to guest. 950# 951# @device: display device to send event(s) to. 952# @head: head to send event(s) to, in case the 953# display device supports multiple scanouts. 954# @events: List of InputEvent union. 955# 956# Returns: Nothing on success. 957# 958# The @device and @head parameters can be used to send the input event 959# to specific input devices in case (a) multiple input devices of the 960# same kind are added to the virtual machine and (b) you have 961# configured input routing (see docs/multiseat.txt) for those input 962# devices. The parameters work exactly like the device and head 963# properties of input devices. If @device is missing, only devices 964# that have no input routing config are admissible. If @device is 965# specified, both input devices with and without input routing config 966# are admissible, but devices with input routing config take 967# precedence. 968# 969# Since: 2.6 970# 971# Note: The consoles are visible in the qom tree, under 972# /backend/console[$index]. They have a device link and head property, 973# so it is possible to map which console belongs to which device and 974# display. 975# 976# Example: 977# 978# 1. Press left mouse button. 979# 980# -> { "execute": "input-send-event", 981# "arguments": { "device": "video0", 982# "events": [ { "type": "btn", 983# "data" : { "down": true, "button": "left" } } ] } } 984# <- { "return": {} } 985# 986# -> { "execute": "input-send-event", 987# "arguments": { "device": "video0", 988# "events": [ { "type": "btn", 989# "data" : { "down": false, "button": "left" } } ] } } 990# <- { "return": {} } 991# 992# 2. Press ctrl-alt-del. 993# 994# -> { "execute": "input-send-event", 995# "arguments": { "events": [ 996# { "type": "key", "data" : { "down": true, 997# "key": {"type": "qcode", "data": "ctrl" } } }, 998# { "type": "key", "data" : { "down": true, 999# "key": {"type": "qcode", "data": "alt" } } }, 1000# { "type": "key", "data" : { "down": true, 1001# "key": {"type": "qcode", "data": "delete" } } } ] } } 1002# <- { "return": {} } 1003# 1004# 3. Move mouse pointer to absolute coordinates (20000, 400). 1005# 1006# -> { "execute": "input-send-event" , 1007# "arguments": { "events": [ 1008# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1009# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1010# <- { "return": {} } 1011# 1012## 1013{ 'command': 'input-send-event', 1014 'data': { '*device': 'str', 1015 '*head' : 'int', 1016 'events' : [ 'InputEvent' ] } } 1017 1018 1019## 1020# @DisplayGTK: 1021# 1022# GTK display options. 1023# 1024# @grab-on-hover: Grab keyboard input on mouse hover. 1025# @zoom-to-fit: Zoom guest display to fit into the host window. When 1026# turned off the host window will be resized instead. 1027# In case the display device can notify the guest on 1028# window resizes (virtio-gpu) this will default to "on", 1029# assuming the guest will resize the display to match 1030# the window size then. Otherwise it defaults to "off". 1031# Since 3.1 1032# 1033# Since: 2.12 1034# 1035## 1036{ 'struct' : 'DisplayGTK', 1037 'data' : { '*grab-on-hover' : 'bool', 1038 '*zoom-to-fit' : 'bool' } } 1039 1040## 1041# @DisplayEGLHeadless: 1042# 1043# EGL headless display options. 1044# 1045# @rendernode: Which DRM render node should be used. Default is the first 1046# available node on the host. 1047# 1048# Since: 3.1 1049# 1050## 1051{ 'struct' : 'DisplayEGLHeadless', 1052 'data' : { '*rendernode' : 'str' } } 1053 1054 ## 1055 # @DisplayGLMode: 1056 # 1057 # Display OpenGL mode. 1058 # 1059 # @off: Disable OpenGL (default). 1060 # @on: Use OpenGL, pick context type automatically. 1061 # Would better be named 'auto' but is called 'on' for backward 1062 # compatibility with bool type. 1063 # @core: Use OpenGL with Core (desktop) Context. 1064 # @es: Use OpenGL with ES (embedded systems) Context. 1065 # 1066 # Since: 3.0 1067 # 1068 ## 1069 { 'enum' : 'DisplayGLMode', 1070 'data' : [ 'off', 'on', 'core', 'es' ] } 1071 1072## 1073# @DisplayType: 1074# 1075# Display (user interface) type. 1076# 1077# Since: 2.12 1078# 1079## 1080{ 'enum' : 'DisplayType', 1081 'data' : [ 'default', 'none', 'gtk', 'sdl', 1082 'egl-headless', 'curses', 'cocoa' ] } 1083 1084## 1085# @DisplayOptions: 1086# 1087# Display (user interface) options. 1088# 1089# @type: Which DisplayType qemu should use. 1090# @full-screen: Start user interface in fullscreen mode (default: off). 1091# @window-close: Allow to quit qemu with window close button (default: on). 1092# @gl: Enable OpenGL support (default: off). 1093# 1094# Since: 2.12 1095# 1096## 1097{ 'union' : 'DisplayOptions', 1098 'base' : { 'type' : 'DisplayType', 1099 '*full-screen' : 'bool', 1100 '*window-close' : 'bool', 1101 '*gl' : 'DisplayGLMode' }, 1102 'discriminator' : 'type', 1103 'data' : { 'gtk' : 'DisplayGTK', 1104 'egl-headless' : 'DisplayEGLHeadless'} } 1105 1106## 1107# @query-display-options: 1108# 1109# Returns information about display configuration 1110# 1111# Returns: @DisplayOptions 1112# 1113# Since: 3.1 1114# 1115## 1116{ 'command': 'query-display-options', 1117 'returns': 'DisplayOptions' } 1118