1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Remote desktop 7## 8 9{ 'include': 'common.json' } 10{ 'include': 'sockets.json' } 11 12## 13# @set_password: 14# 15# Sets the password of a remote display session. 16# 17# @protocol: - 'vnc' to modify the VNC server password 18# - 'spice' to modify the Spice server password 19# 20# @password: the new password 21# 22# @connected: how to handle existing clients when changing the 23# password. If nothing is specified, defaults to 'keep' 24# 'fail' to fail the command if clients are connected 25# 'disconnect' to disconnect existing clients 26# 'keep' to maintain existing clients 27# 28# Returns: - Nothing on success 29# - If Spice is not enabled, DeviceNotFound 30# 31# Since: 0.14 32# 33# Example: 34# 35# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 36# "password": "secret" } } 37# <- { "return": {} } 38# 39## 40{ 'command': 'set_password', 41 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } 42 43## 44# @expire_password: 45# 46# Expire the password of a remote display server. 47# 48# @protocol: the name of the remote display protocol 'vnc' or 'spice' 49# 50# @time: when to expire the password. 51# 52# - 'now' to expire the password immediately 53# - 'never' to cancel password expiration 54# - '+INT' where INT is the number of seconds from now (integer) 55# - 'INT' where INT is the absolute time in seconds 56# 57# Returns: - Nothing on success 58# - If @protocol is 'spice' and Spice is not active, DeviceNotFound 59# 60# Since: 0.14 61# 62# Notes: Time is relative to the server and currently there is no way to 63# coordinate server time with client time. It is not recommended to 64# use the absolute time version of the @time parameter unless you're 65# sure you are on the same machine as the QEMU instance. 66# 67# Example: 68# 69# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 70# "time": "+60" } } 71# <- { "return": {} } 72# 73## 74{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } 75 76## 77# @screendump: 78# 79# Write a PPM of the VGA screen to a file. 80# 81# @filename: the path of a new PPM file to store the image 82# 83# @device: ID of the display device that should be dumped. If this parameter 84# is missing, the primary display will be used. (Since 2.12) 85# 86# @head: head to use in case the device supports multiple heads. If this 87# parameter is missing, head #0 will be used. Also note that the head 88# can only be specified in conjunction with the device ID. (Since 2.12) 89# 90# Returns: Nothing on success 91# 92# Since: 0.14 93# 94# Example: 95# 96# -> { "execute": "screendump", 97# "arguments": { "filename": "/tmp/image" } } 98# <- { "return": {} } 99# 100## 101{ 'command': 'screendump', 102 'data': {'filename': 'str', '*device': 'str', '*head': 'int'}, 103 'coroutine': true } 104 105## 106# == Spice 107## 108 109## 110# @SpiceBasicInfo: 111# 112# The basic information for SPICE network connection 113# 114# @host: IP address 115# 116# @port: port number 117# 118# @family: address family 119# 120# Since: 2.1 121## 122{ 'struct': 'SpiceBasicInfo', 123 'data': { 'host': 'str', 124 'port': 'str', 125 'family': 'NetworkAddressFamily' }, 126 'if': 'defined(CONFIG_SPICE)' } 127 128## 129# @SpiceServerInfo: 130# 131# Information about a SPICE server 132# 133# @auth: authentication method 134# 135# Since: 2.1 136## 137{ 'struct': 'SpiceServerInfo', 138 'base': 'SpiceBasicInfo', 139 'data': { '*auth': 'str' }, 140 'if': 'defined(CONFIG_SPICE)' } 141 142## 143# @SpiceChannel: 144# 145# Information about a SPICE client channel. 146# 147# @connection-id: SPICE connection id number. All channels with the same id 148# belong to the same SPICE session. 149# 150# @channel-type: SPICE channel type number. "1" is the main control 151# channel, filter for this one if you want to track spice 152# sessions only 153# 154# @channel-id: SPICE channel ID number. Usually "0", might be different when 155# multiple channels of the same type exist, such as multiple 156# display channels in a multihead setup 157# 158# @tls: true if the channel is encrypted, false otherwise. 159# 160# Since: 0.14 161## 162{ 'struct': 'SpiceChannel', 163 'base': 'SpiceBasicInfo', 164 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 165 'tls': 'bool'}, 166 'if': 'defined(CONFIG_SPICE)' } 167 168## 169# @SpiceQueryMouseMode: 170# 171# An enumeration of Spice mouse states. 172# 173# @client: Mouse cursor position is determined by the client. 174# 175# @server: Mouse cursor position is determined by the server. 176# 177# @unknown: No information is available about mouse mode used by 178# the spice server. 179# 180# Note: spice/enums.h has a SpiceMouseMode already, hence the name. 181# 182# Since: 1.1 183## 184{ 'enum': 'SpiceQueryMouseMode', 185 'data': [ 'client', 'server', 'unknown' ], 186 'if': 'defined(CONFIG_SPICE)' } 187 188## 189# @SpiceInfo: 190# 191# Information about the SPICE session. 192# 193# @enabled: true if the SPICE server is enabled, false otherwise 194# 195# @migrated: true if the last guest migration completed and spice 196# migration had completed as well. false otherwise. (since 1.4) 197# 198# @host: The hostname the SPICE server is bound to. This depends on 199# the name resolution on the host and may be an IP address. 200# 201# @port: The SPICE server's port number. 202# 203# @compiled-version: SPICE server version. 204# 205# @tls-port: The SPICE server's TLS port number. 206# 207# @auth: the current authentication type used by the server 208# 209# - 'none' if no authentication is being used 210# - 'spice' uses SASL or direct TLS authentication, depending on command 211# line options 212# 213# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can 214# be determined by the client or the server, or unknown if spice 215# server doesn't provide this information. (since: 1.1) 216# 217# @channels: a list of @SpiceChannel for each active spice channel 218# 219# Since: 0.14 220## 221{ 'struct': 'SpiceInfo', 222 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 223 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 224 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 225 'if': 'defined(CONFIG_SPICE)' } 226 227## 228# @query-spice: 229# 230# Returns information about the current SPICE server 231# 232# Returns: @SpiceInfo 233# 234# Since: 0.14 235# 236# Example: 237# 238# -> { "execute": "query-spice" } 239# <- { "return": { 240# "enabled": true, 241# "auth": "spice", 242# "port": 5920, 243# "tls-port": 5921, 244# "host": "0.0.0.0", 245# "channels": [ 246# { 247# "port": "54924", 248# "family": "ipv4", 249# "channel-type": 1, 250# "connection-id": 1804289383, 251# "host": "127.0.0.1", 252# "channel-id": 0, 253# "tls": true 254# }, 255# { 256# "port": "36710", 257# "family": "ipv4", 258# "channel-type": 4, 259# "connection-id": 1804289383, 260# "host": "127.0.0.1", 261# "channel-id": 0, 262# "tls": false 263# }, 264# [ ... more channels follow ... ] 265# ] 266# } 267# } 268# 269## 270{ 'command': 'query-spice', 'returns': 'SpiceInfo', 271 'if': 'defined(CONFIG_SPICE)' } 272 273## 274# @SPICE_CONNECTED: 275# 276# Emitted when a SPICE client establishes a connection 277# 278# @server: server information 279# 280# @client: client information 281# 282# Since: 0.14 283# 284# Example: 285# 286# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 287# "event": "SPICE_CONNECTED", 288# "data": { 289# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 290# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 291# }} 292# 293## 294{ 'event': 'SPICE_CONNECTED', 295 'data': { 'server': 'SpiceBasicInfo', 296 'client': 'SpiceBasicInfo' }, 297 'if': 'defined(CONFIG_SPICE)' } 298 299## 300# @SPICE_INITIALIZED: 301# 302# Emitted after initial handshake and authentication takes place (if any) 303# and the SPICE channel is up and running 304# 305# @server: server information 306# 307# @client: client information 308# 309# Since: 0.14 310# 311# Example: 312# 313# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 314# "event": "SPICE_INITIALIZED", 315# "data": {"server": {"auth": "spice", "port": "5921", 316# "family": "ipv4", "host": "127.0.0.1"}, 317# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 318# "connection-id": 1804289383, "host": "127.0.0.1", 319# "channel-id": 0, "tls": true} 320# }} 321# 322## 323{ 'event': 'SPICE_INITIALIZED', 324 'data': { 'server': 'SpiceServerInfo', 325 'client': 'SpiceChannel' }, 326 'if': 'defined(CONFIG_SPICE)' } 327 328## 329# @SPICE_DISCONNECTED: 330# 331# Emitted when the SPICE connection is closed 332# 333# @server: server information 334# 335# @client: client information 336# 337# Since: 0.14 338# 339# Example: 340# 341# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 342# "event": "SPICE_DISCONNECTED", 343# "data": { 344# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 345# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 346# }} 347# 348## 349{ 'event': 'SPICE_DISCONNECTED', 350 'data': { 'server': 'SpiceBasicInfo', 351 'client': 'SpiceBasicInfo' }, 352 'if': 'defined(CONFIG_SPICE)' } 353 354## 355# @SPICE_MIGRATE_COMPLETED: 356# 357# Emitted when SPICE migration has completed 358# 359# Since: 1.3 360# 361# Example: 362# 363# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 364# "event": "SPICE_MIGRATE_COMPLETED" } 365# 366## 367{ 'event': 'SPICE_MIGRATE_COMPLETED', 368 'if': 'defined(CONFIG_SPICE)' } 369 370## 371# == VNC 372## 373 374## 375# @VncBasicInfo: 376# 377# The basic information for vnc network connection 378# 379# @host: IP address 380# 381# @service: The service name of the vnc port. This may depend on the host 382# system's service database so symbolic names should not be relied 383# on. 384# 385# @family: address family 386# 387# @websocket: true in case the socket is a websocket (since 2.3). 388# 389# Since: 2.1 390## 391{ 'struct': 'VncBasicInfo', 392 'data': { 'host': 'str', 393 'service': 'str', 394 'family': 'NetworkAddressFamily', 395 'websocket': 'bool' }, 396 'if': 'defined(CONFIG_VNC)' } 397 398## 399# @VncServerInfo: 400# 401# The network connection information for server 402# 403# @auth: authentication method used for 404# the plain (non-websocket) VNC server 405# 406# Since: 2.1 407## 408{ 'struct': 'VncServerInfo', 409 'base': 'VncBasicInfo', 410 'data': { '*auth': 'str' }, 411 'if': 'defined(CONFIG_VNC)' } 412 413## 414# @VncClientInfo: 415# 416# Information about a connected VNC client. 417# 418# @x509_dname: If x509 authentication is in use, the Distinguished 419# Name of the client. 420# 421# @sasl_username: If SASL authentication is in use, the SASL username 422# used for authentication. 423# 424# Since: 0.14 425## 426{ 'struct': 'VncClientInfo', 427 'base': 'VncBasicInfo', 428 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 429 'if': 'defined(CONFIG_VNC)' } 430 431## 432# @VncInfo: 433# 434# Information about the VNC session. 435# 436# @enabled: true if the VNC server is enabled, false otherwise 437# 438# @host: The hostname the VNC server is bound to. This depends on 439# the name resolution on the host and may be an IP address. 440# 441# @family: - 'ipv6' if the host is listening for IPv6 connections 442# - 'ipv4' if the host is listening for IPv4 connections 443# - 'unix' if the host is listening on a unix domain socket 444# - 'unknown' otherwise 445# 446# @service: The service name of the server's port. This may depends 447# on the host system's service database so symbolic names should not 448# be relied on. 449# 450# @auth: the current authentication type used by the server 451# 452# - 'none' if no authentication is being used 453# - 'vnc' if VNC authentication is being used 454# - 'vencrypt+plain' if VEncrypt is used with plain text authentication 455# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication 456# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication 457# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth 458# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 459# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 460# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth 461# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 462# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth 463# 464# @clients: a list of @VncClientInfo of all currently connected clients 465# 466# Since: 0.14 467## 468{ 'struct': 'VncInfo', 469 'data': {'enabled': 'bool', '*host': 'str', 470 '*family': 'NetworkAddressFamily', 471 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 472 'if': 'defined(CONFIG_VNC)' } 473 474## 475# @VncPrimaryAuth: 476# 477# vnc primary authentication method. 478# 479# Since: 2.3 480## 481{ 'enum': 'VncPrimaryAuth', 482 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 483 'tls', 'vencrypt', 'sasl' ], 484 'if': 'defined(CONFIG_VNC)' } 485 486## 487# @VncVencryptSubAuth: 488# 489# vnc sub authentication method with vencrypt. 490# 491# Since: 2.3 492## 493{ 'enum': 'VncVencryptSubAuth', 494 'data': [ 'plain', 495 'tls-none', 'x509-none', 496 'tls-vnc', 'x509-vnc', 497 'tls-plain', 'x509-plain', 498 'tls-sasl', 'x509-sasl' ], 499 'if': 'defined(CONFIG_VNC)' } 500 501## 502# @VncServerInfo2: 503# 504# The network connection information for server 505# 506# @auth: The current authentication type used by the servers 507# 508# @vencrypt: The vencrypt sub authentication type used by the 509# servers, only specified in case auth == vencrypt. 510# 511# Since: 2.9 512## 513{ 'struct': 'VncServerInfo2', 514 'base': 'VncBasicInfo', 515 'data': { 'auth' : 'VncPrimaryAuth', 516 '*vencrypt' : 'VncVencryptSubAuth' }, 517 'if': 'defined(CONFIG_VNC)' } 518 519## 520# @VncInfo2: 521# 522# Information about a vnc server 523# 524# @id: vnc server name. 525# 526# @server: A list of @VncBasincInfo describing all listening sockets. 527# The list can be empty (in case the vnc server is disabled). 528# It also may have multiple entries: normal + websocket, 529# possibly also ipv4 + ipv6 in the future. 530# 531# @clients: A list of @VncClientInfo of all currently connected clients. 532# The list can be empty, for obvious reasons. 533# 534# @auth: The current authentication type used by the non-websockets servers 535# 536# @vencrypt: The vencrypt authentication type used by the servers, 537# only specified in case auth == vencrypt. 538# 539# @display: The display device the vnc server is linked to. 540# 541# Since: 2.3 542## 543{ 'struct': 'VncInfo2', 544 'data': { 'id' : 'str', 545 'server' : ['VncServerInfo2'], 546 'clients' : ['VncClientInfo'], 547 'auth' : 'VncPrimaryAuth', 548 '*vencrypt' : 'VncVencryptSubAuth', 549 '*display' : 'str' }, 550 'if': 'defined(CONFIG_VNC)' } 551 552## 553# @query-vnc: 554# 555# Returns information about the current VNC server 556# 557# Returns: @VncInfo 558# 559# Since: 0.14 560# 561# Example: 562# 563# -> { "execute": "query-vnc" } 564# <- { "return": { 565# "enabled":true, 566# "host":"0.0.0.0", 567# "service":"50402", 568# "auth":"vnc", 569# "family":"ipv4", 570# "clients":[ 571# { 572# "host":"127.0.0.1", 573# "service":"50401", 574# "family":"ipv4" 575# } 576# ] 577# } 578# } 579# 580## 581{ 'command': 'query-vnc', 'returns': 'VncInfo', 582 'if': 'defined(CONFIG_VNC)' } 583## 584# @query-vnc-servers: 585# 586# Returns a list of vnc servers. The list can be empty. 587# 588# Returns: a list of @VncInfo2 589# 590# Since: 2.3 591## 592{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 593 'if': 'defined(CONFIG_VNC)' } 594 595## 596# @change-vnc-password: 597# 598# Change the VNC server password. 599# 600# @password: the new password to use with VNC authentication 601# 602# Since: 1.1 603# 604# Notes: An empty password in this command will set the password to the empty 605# string. Existing clients are unaffected by executing this command. 606## 607{ 'command': 'change-vnc-password', 608 'data': { 'password': 'str' }, 609 'if': 'defined(CONFIG_VNC)' } 610 611## 612# @VNC_CONNECTED: 613# 614# Emitted when a VNC client establishes a connection 615# 616# @server: server information 617# 618# @client: client information 619# 620# Note: This event is emitted before any authentication takes place, thus 621# the authentication ID is not provided 622# 623# Since: 0.13 624# 625# Example: 626# 627# <- { "event": "VNC_CONNECTED", 628# "data": { 629# "server": { "auth": "sasl", "family": "ipv4", 630# "service": "5901", "host": "0.0.0.0" }, 631# "client": { "family": "ipv4", "service": "58425", 632# "host": "127.0.0.1" } }, 633# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 634# 635## 636{ 'event': 'VNC_CONNECTED', 637 'data': { 'server': 'VncServerInfo', 638 'client': 'VncBasicInfo' }, 639 'if': 'defined(CONFIG_VNC)' } 640 641## 642# @VNC_INITIALIZED: 643# 644# Emitted after authentication takes place (if any) and the VNC session is 645# made active 646# 647# @server: server information 648# 649# @client: client information 650# 651# Since: 0.13 652# 653# Example: 654# 655# <- { "event": "VNC_INITIALIZED", 656# "data": { 657# "server": { "auth": "sasl", "family": "ipv4", 658# "service": "5901", "host": "0.0.0.0"}, 659# "client": { "family": "ipv4", "service": "46089", 660# "host": "127.0.0.1", "sasl_username": "luiz" } }, 661# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 662# 663## 664{ 'event': 'VNC_INITIALIZED', 665 'data': { 'server': 'VncServerInfo', 666 'client': 'VncClientInfo' }, 667 'if': 'defined(CONFIG_VNC)' } 668 669## 670# @VNC_DISCONNECTED: 671# 672# Emitted when the connection is closed 673# 674# @server: server information 675# 676# @client: client information 677# 678# Since: 0.13 679# 680# Example: 681# 682# <- { "event": "VNC_DISCONNECTED", 683# "data": { 684# "server": { "auth": "sasl", "family": "ipv4", 685# "service": "5901", "host": "0.0.0.0" }, 686# "client": { "family": "ipv4", "service": "58425", 687# "host": "127.0.0.1", "sasl_username": "luiz" } }, 688# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 689# 690## 691{ 'event': 'VNC_DISCONNECTED', 692 'data': { 'server': 'VncServerInfo', 693 'client': 'VncClientInfo' }, 694 'if': 'defined(CONFIG_VNC)' } 695 696## 697# = Input 698## 699 700## 701# @MouseInfo: 702# 703# Information about a mouse device. 704# 705# @name: the name of the mouse device 706# 707# @index: the index of the mouse device 708# 709# @current: true if this device is currently receiving mouse events 710# 711# @absolute: true if this device supports absolute coordinates as input 712# 713# Since: 0.14 714## 715{ 'struct': 'MouseInfo', 716 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 717 'absolute': 'bool'} } 718 719## 720# @query-mice: 721# 722# Returns information about each active mouse device 723# 724# Returns: a list of @MouseInfo for each device 725# 726# Since: 0.14 727# 728# Example: 729# 730# -> { "execute": "query-mice" } 731# <- { "return": [ 732# { 733# "name":"QEMU Microsoft Mouse", 734# "index":0, 735# "current":false, 736# "absolute":false 737# }, 738# { 739# "name":"QEMU PS/2 Mouse", 740# "index":1, 741# "current":true, 742# "absolute":true 743# } 744# ] 745# } 746# 747## 748{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 749 750## 751# @QKeyCode: 752# 753# An enumeration of key name. 754# 755# This is used by the @send-key command. 756# 757# @unmapped: since 2.0 758# @pause: since 2.0 759# @ro: since 2.4 760# @kp_comma: since 2.4 761# @kp_equals: since 2.6 762# @power: since 2.6 763# @hiragana: since 2.9 764# @henkan: since 2.9 765# @yen: since 2.9 766# 767# @sleep: since 2.10 768# @wake: since 2.10 769# @audionext: since 2.10 770# @audioprev: since 2.10 771# @audiostop: since 2.10 772# @audioplay: since 2.10 773# @audiomute: since 2.10 774# @volumeup: since 2.10 775# @volumedown: since 2.10 776# @mediaselect: since 2.10 777# @mail: since 2.10 778# @calculator: since 2.10 779# @computer: since 2.10 780# @ac_home: since 2.10 781# @ac_back: since 2.10 782# @ac_forward: since 2.10 783# @ac_refresh: since 2.10 784# @ac_bookmarks: since 2.10 785# 786# @muhenkan: since 2.12 787# @katakanahiragana: since 2.12 788# 789# 'sysrq' was mistakenly added to hack around the fact that 790# the ps2 driver was not generating correct scancodes sequences 791# when 'alt+print' was pressed. This flaw is now fixed and the 792# 'sysrq' key serves no further purpose. Any further use of 793# 'sysrq' will be transparently changed to 'print', so they 794# are effectively synonyms. 795# 796# Since: 1.3 797# 798## 799{ 'enum': 'QKeyCode', 800 'data': [ 'unmapped', 801 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 802 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 803 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 804 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 805 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 806 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 807 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 808 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 809 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 810 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 811 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 812 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 813 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 814 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 815 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 816 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 817 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 818 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 819 'volumeup', 'volumedown', 'mediaselect', 820 'mail', 'calculator', 'computer', 821 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] } 822 823## 824# @KeyValue: 825# 826# Represents a keyboard key. 827# 828# Since: 1.3 829## 830{ 'union': 'KeyValue', 831 'data': { 832 'number': 'int', 833 'qcode': 'QKeyCode' } } 834 835## 836# @send-key: 837# 838# Send keys to guest. 839# 840# @keys: An array of @KeyValue elements. All @KeyValues in this array are 841# simultaneously sent to the guest. A @KeyValue.number value is sent 842# directly to the guest, while @KeyValue.qcode must be a valid 843# @QKeyCode value 844# 845# @hold-time: time to delay key up events, milliseconds. Defaults 846# to 100 847# 848# Returns: - Nothing on success 849# - If key is unknown or redundant, InvalidParameter 850# 851# Since: 1.3 852# 853# Example: 854# 855# -> { "execute": "send-key", 856# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 857# { "type": "qcode", "data": "alt" }, 858# { "type": "qcode", "data": "delete" } ] } } 859# <- { "return": {} } 860# 861## 862{ 'command': 'send-key', 863 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 864 865## 866# @InputButton: 867# 868# Button of a pointer input device (mouse, tablet). 869# 870# @side: front side button of a 5-button mouse (since 2.9) 871# 872# @extra: rear side button of a 5-button mouse (since 2.9) 873# 874# Since: 2.0 875## 876{ 'enum' : 'InputButton', 877 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 878 'extra' ] } 879 880## 881# @InputAxis: 882# 883# Position axis of a pointer input device (mouse, tablet). 884# 885# Since: 2.0 886## 887{ 'enum' : 'InputAxis', 888 'data' : [ 'x', 'y' ] } 889 890## 891# @InputKeyEvent: 892# 893# Keyboard input event. 894# 895# @key: Which key this event is for. 896# @down: True for key-down and false for key-up events. 897# 898# Since: 2.0 899## 900{ 'struct' : 'InputKeyEvent', 901 'data' : { 'key' : 'KeyValue', 902 'down' : 'bool' } } 903 904## 905# @InputBtnEvent: 906# 907# Pointer button input event. 908# 909# @button: Which button this event is for. 910# @down: True for key-down and false for key-up events. 911# 912# Since: 2.0 913## 914{ 'struct' : 'InputBtnEvent', 915 'data' : { 'button' : 'InputButton', 916 'down' : 'bool' } } 917 918## 919# @InputMoveEvent: 920# 921# Pointer motion input event. 922# 923# @axis: Which axis is referenced by @value. 924# @value: Pointer position. For absolute coordinates the 925# valid range is 0 -> 0x7ffff 926# 927# Since: 2.0 928## 929{ 'struct' : 'InputMoveEvent', 930 'data' : { 'axis' : 'InputAxis', 931 'value' : 'int' } } 932 933## 934# @InputEvent: 935# 936# Input event union. 937# 938# @type: the input type, one of: 939# 940# - 'key': Input event of Keyboard 941# - 'btn': Input event of pointer buttons 942# - 'rel': Input event of relative pointer motion 943# - 'abs': Input event of absolute pointer motion 944# 945# Since: 2.0 946## 947{ 'union' : 'InputEvent', 948 'data' : { 'key' : 'InputKeyEvent', 949 'btn' : 'InputBtnEvent', 950 'rel' : 'InputMoveEvent', 951 'abs' : 'InputMoveEvent' } } 952 953## 954# @input-send-event: 955# 956# Send input event(s) to guest. 957# 958# The @device and @head parameters can be used to send the input event 959# to specific input devices in case (a) multiple input devices of the 960# same kind are added to the virtual machine and (b) you have 961# configured input routing (see docs/multiseat.txt) for those input 962# devices. The parameters work exactly like the device and head 963# properties of input devices. If @device is missing, only devices 964# that have no input routing config are admissible. If @device is 965# specified, both input devices with and without input routing config 966# are admissible, but devices with input routing config take 967# precedence. 968# 969# @device: display device to send event(s) to. 970# @head: head to send event(s) to, in case the 971# display device supports multiple scanouts. 972# @events: List of InputEvent union. 973# 974# Returns: Nothing on success. 975# 976# Since: 2.6 977# 978# Note: The consoles are visible in the qom tree, under 979# /backend/console[$index]. They have a device link and head property, 980# so it is possible to map which console belongs to which device and 981# display. 982# 983# Example: 984# 985# 1. Press left mouse button. 986# 987# -> { "execute": "input-send-event", 988# "arguments": { "device": "video0", 989# "events": [ { "type": "btn", 990# "data" : { "down": true, "button": "left" } } ] } } 991# <- { "return": {} } 992# 993# -> { "execute": "input-send-event", 994# "arguments": { "device": "video0", 995# "events": [ { "type": "btn", 996# "data" : { "down": false, "button": "left" } } ] } } 997# <- { "return": {} } 998# 999# 2. Press ctrl-alt-del. 1000# 1001# -> { "execute": "input-send-event", 1002# "arguments": { "events": [ 1003# { "type": "key", "data" : { "down": true, 1004# "key": {"type": "qcode", "data": "ctrl" } } }, 1005# { "type": "key", "data" : { "down": true, 1006# "key": {"type": "qcode", "data": "alt" } } }, 1007# { "type": "key", "data" : { "down": true, 1008# "key": {"type": "qcode", "data": "delete" } } } ] } } 1009# <- { "return": {} } 1010# 1011# 3. Move mouse pointer to absolute coordinates (20000, 400). 1012# 1013# -> { "execute": "input-send-event" , 1014# "arguments": { "events": [ 1015# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1016# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1017# <- { "return": {} } 1018# 1019## 1020{ 'command': 'input-send-event', 1021 'data': { '*device': 'str', 1022 '*head' : 'int', 1023 'events' : [ 'InputEvent' ] } } 1024 1025## 1026# @DisplayGTK: 1027# 1028# GTK display options. 1029# 1030# @grab-on-hover: Grab keyboard input on mouse hover. 1031# @zoom-to-fit: Zoom guest display to fit into the host window. When 1032# turned off the host window will be resized instead. 1033# In case the display device can notify the guest on 1034# window resizes (virtio-gpu) this will default to "on", 1035# assuming the guest will resize the display to match 1036# the window size then. Otherwise it defaults to "off". 1037# Since 3.1 1038# 1039# Since: 2.12 1040# 1041## 1042{ 'struct' : 'DisplayGTK', 1043 'data' : { '*grab-on-hover' : 'bool', 1044 '*zoom-to-fit' : 'bool' } } 1045 1046## 1047# @DisplayEGLHeadless: 1048# 1049# EGL headless display options. 1050# 1051# @rendernode: Which DRM render node should be used. Default is the first 1052# available node on the host. 1053# 1054# Since: 3.1 1055# 1056## 1057{ 'struct' : 'DisplayEGLHeadless', 1058 'data' : { '*rendernode' : 'str' } } 1059 1060 ## 1061 # @DisplayGLMode: 1062 # 1063 # Display OpenGL mode. 1064 # 1065 # @off: Disable OpenGL (default). 1066 # @on: Use OpenGL, pick context type automatically. 1067 # Would better be named 'auto' but is called 'on' for backward 1068 # compatibility with bool type. 1069 # @core: Use OpenGL with Core (desktop) Context. 1070 # @es: Use OpenGL with ES (embedded systems) Context. 1071 # 1072 # Since: 3.0 1073 # 1074 ## 1075{ 'enum' : 'DisplayGLMode', 1076 'data' : [ 'off', 'on', 'core', 'es' ] } 1077 1078## 1079# @DisplayCurses: 1080# 1081# Curses display options. 1082# 1083# @charset: Font charset used by guest (default: CP437). 1084# 1085# Since: 4.0 1086# 1087## 1088{ 'struct' : 'DisplayCurses', 1089 'data' : { '*charset' : 'str' } } 1090 1091## 1092# @DisplayType: 1093# 1094# Display (user interface) type. 1095# 1096# @default: The default user interface, selecting from the first available 1097# of gtk, sdl, cocoa, and vnc. 1098# 1099# @none: No user interface or video output display. The guest will 1100# still see an emulated graphics card, but its output will not 1101# be displayed to the QEMU user. 1102# 1103# @gtk: The GTK user interface. 1104# 1105# @sdl: The SDL user interface. 1106# 1107# @egl-headless: No user interface, offload GL operations to a local 1108# DRI device. Graphical display need to be paired with 1109# VNC or Spice. (Since 3.1) 1110# 1111# @curses: Display video output via curses. For graphics device 1112# models which support a text mode, QEMU can display this 1113# output using a curses/ncurses interface. Nothing is 1114# displayed when the graphics device is in graphical mode or 1115# if the graphics device does not support a text 1116# mode. Generally only the VGA device models support text 1117# mode. 1118# 1119# @cocoa: The Cocoa user interface. 1120# 1121# @spice-app: Set up a Spice server and run the default associated 1122# application to connect to it. The server will redirect 1123# the serial console and QEMU monitors. (Since 4.0) 1124# 1125# Since: 2.12 1126# 1127## 1128{ 'enum' : 'DisplayType', 1129 'data' : [ 'default', 'none', 'gtk', 'sdl', 1130 'egl-headless', 'curses', 'cocoa', 1131 'spice-app'] } 1132 1133## 1134# @DisplayOptions: 1135# 1136# Display (user interface) options. 1137# 1138# @type: Which DisplayType qemu should use. 1139# @full-screen: Start user interface in fullscreen mode (default: off). 1140# @window-close: Allow to quit qemu with window close button (default: on). 1141# @show-cursor: Force showing the mouse cursor (default: off). 1142# (since: 5.0) 1143# @gl: Enable OpenGL support (default: off). 1144# 1145# Since: 2.12 1146# 1147## 1148{ 'union' : 'DisplayOptions', 1149 'base' : { 'type' : 'DisplayType', 1150 '*full-screen' : 'bool', 1151 '*window-close' : 'bool', 1152 '*show-cursor' : 'bool', 1153 '*gl' : 'DisplayGLMode' }, 1154 'discriminator' : 'type', 1155 'data' : { 'gtk' : 'DisplayGTK', 1156 'curses' : 'DisplayCurses', 1157 'egl-headless' : 'DisplayEGLHeadless'} } 1158 1159## 1160# @query-display-options: 1161# 1162# Returns information about display configuration 1163# 1164# Returns: @DisplayOptions 1165# 1166# Since: 3.1 1167# 1168## 1169{ 'command': 'query-display-options', 1170 'returns': 'DisplayOptions' } 1171