1# -*- Mode: Python -*- 2# vim: filetype=python 3# 4 5## 6# = Remote desktop 7## 8 9{ 'include': 'common.json' } 10{ 'include': 'sockets.json' } 11 12## 13# @DisplayProtocol: 14# 15# Display protocols which support changing password options. 16# 17# Since: 7.0 18## 19{ 'enum': 'DisplayProtocol', 20 'data': [ 'vnc', 'spice' ] } 21 22## 23# @SetPasswordAction: 24# 25# An action to take on changing a password on a connection with active 26# clients. 27# 28# @keep: maintain existing clients 29# 30# @fail: fail the command if clients are connected 31# 32# @disconnect: disconnect existing clients 33# 34# Since: 7.0 35## 36{ 'enum': 'SetPasswordAction', 37 'data': [ 'keep', 'fail', 'disconnect' ] } 38 39## 40# @SetPasswordOptions: 41# 42# Options for set_password. 43# 44# @protocol: 45# - 'vnc' to modify the VNC server password 46# - 'spice' to modify the Spice server password 47# 48# @password: the new password 49# 50# @connected: How to handle existing clients when changing the 51# password. If nothing is specified, defaults to 'keep'. For VNC, 52# only 'keep' is currently implemented. 53# 54# Since: 7.0 55## 56{ 'union': 'SetPasswordOptions', 57 'base': { 'protocol': 'DisplayProtocol', 58 'password': 'str', 59 '*connected': 'SetPasswordAction' }, 60 'discriminator': 'protocol', 61 'data': { 'vnc': 'SetPasswordOptionsVnc' } } 62 63## 64# @SetPasswordOptionsVnc: 65# 66# Options for set_password specific to the VNC procotol. 67# 68# @display: The id of the display where the password should be 69# changed. Defaults to the first. 70# 71# Since: 7.0 72## 73{ 'struct': 'SetPasswordOptionsVnc', 74 'data': { '*display': 'str' } } 75 76## 77# @set_password: 78# 79# Set the password of a remote display server. 80# 81# Returns: 82# - Nothing on success 83# - If Spice is not enabled, DeviceNotFound 84# 85# Since: 0.14 86# 87# Example: 88# 89# -> { "execute": "set_password", "arguments": { "protocol": "vnc", 90# "password": "secret" } } 91# <- { "return": {} } 92## 93{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' } 94 95## 96# @ExpirePasswordOptions: 97# 98# General options for expire_password. 99# 100# @protocol: 101# - 'vnc' to modify the VNC server expiration 102# - 'spice' to modify the Spice server expiration 103# 104# @time: when to expire the password. 105# 106# - 'now' to expire the password immediately 107# - 'never' to cancel password expiration 108# - '+INT' where INT is the number of seconds from now (integer) 109# - 'INT' where INT is the absolute time in seconds 110# 111# Notes: Time is relative to the server and currently there is no way 112# to coordinate server time with client time. It is not 113# recommended to use the absolute time version of the @time 114# parameter unless you're sure you are on the same machine as the 115# QEMU instance. 116# 117# Since: 7.0 118## 119{ 'union': 'ExpirePasswordOptions', 120 'base': { 'protocol': 'DisplayProtocol', 121 'time': 'str' }, 122 'discriminator': 'protocol', 123 'data': { 'vnc': 'ExpirePasswordOptionsVnc' } } 124 125## 126# @ExpirePasswordOptionsVnc: 127# 128# Options for expire_password specific to the VNC procotol. 129# 130# @display: The id of the display where the expiration should be 131# changed. Defaults to the first. 132# 133# Since: 7.0 134## 135{ 'struct': 'ExpirePasswordOptionsVnc', 136 'data': { '*display': 'str' } } 137 138## 139# @expire_password: 140# 141# Expire the password of a remote display server. 142# 143# Returns: 144# - Nothing on success 145# - If @protocol is 'spice' and Spice is not active, 146# DeviceNotFound 147# 148# Since: 0.14 149# 150# Example: 151# 152# -> { "execute": "expire_password", "arguments": { "protocol": "vnc", 153# "time": "+60" } } 154# <- { "return": {} } 155## 156{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' } 157 158## 159# @ImageFormat: 160# 161# Supported image format types. 162# 163# @png: PNG format 164# 165# @ppm: PPM format 166# 167# Since: 7.1 168## 169{ 'enum': 'ImageFormat', 170 'data': ['ppm', 'png'] } 171 172## 173# @screendump: 174# 175# Capture the contents of a screen and write it to a file. 176# 177# @filename: the path of a new file to store the image 178# 179# @device: ID of the display device that should be dumped. If this 180# parameter is missing, the primary display will be used. (Since 181# 2.12) 182# 183# @head: head to use in case the device supports multiple heads. If 184# this parameter is missing, head #0 will be used. Also note that 185# the head can only be specified in conjunction with the device 186# ID. (Since 2.12) 187# 188# @format: image format for screendump. (default: ppm) (Since 7.1) 189# 190# Returns: Nothing on success 191# 192# Since: 0.14 193# 194# Example: 195# 196# -> { "execute": "screendump", 197# "arguments": { "filename": "/tmp/image" } } 198# <- { "return": {} } 199## 200{ 'command': 'screendump', 201 'data': {'filename': 'str', '*device': 'str', '*head': 'int', 202 '*format': 'ImageFormat'}, 203 'coroutine': true } 204 205## 206# == Spice 207## 208 209## 210# @SpiceBasicInfo: 211# 212# The basic information for SPICE network connection 213# 214# @host: IP address 215# 216# @port: port number 217# 218# @family: address family 219# 220# Since: 2.1 221## 222{ 'struct': 'SpiceBasicInfo', 223 'data': { 'host': 'str', 224 'port': 'str', 225 'family': 'NetworkAddressFamily' }, 226 'if': 'CONFIG_SPICE' } 227 228## 229# @SpiceServerInfo: 230# 231# Information about a SPICE server 232# 233# @auth: authentication method 234# 235# Since: 2.1 236## 237{ 'struct': 'SpiceServerInfo', 238 'base': 'SpiceBasicInfo', 239 'data': { '*auth': 'str' }, 240 'if': 'CONFIG_SPICE' } 241 242## 243# @SpiceChannel: 244# 245# Information about a SPICE client channel. 246# 247# @connection-id: SPICE connection id number. All channels with the 248# same id belong to the same SPICE session. 249# 250# @channel-type: SPICE channel type number. "1" is the main control 251# channel, filter for this one if you want to track spice sessions 252# only 253# 254# @channel-id: SPICE channel ID number. Usually "0", might be 255# different when multiple channels of the same type exist, such as 256# multiple display channels in a multihead setup 257# 258# @tls: true if the channel is encrypted, false otherwise. 259# 260# Since: 0.14 261## 262{ 'struct': 'SpiceChannel', 263 'base': 'SpiceBasicInfo', 264 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', 265 'tls': 'bool'}, 266 'if': 'CONFIG_SPICE' } 267 268## 269# @SpiceQueryMouseMode: 270# 271# An enumeration of Spice mouse states. 272# 273# @client: Mouse cursor position is determined by the client. 274# 275# @server: Mouse cursor position is determined by the server. 276# 277# @unknown: No information is available about mouse mode used by the 278# spice server. 279# 280# Note: spice/enums.h has a SpiceMouseMode already, hence the name. 281# 282# Since: 1.1 283## 284{ 'enum': 'SpiceQueryMouseMode', 285 'data': [ 'client', 'server', 'unknown' ], 286 'if': 'CONFIG_SPICE' } 287 288## 289# @SpiceInfo: 290# 291# Information about the SPICE session. 292# 293# @enabled: true if the SPICE server is enabled, false otherwise 294# 295# @migrated: true if the last guest migration completed and spice 296# migration had completed as well. false otherwise. (since 1.4) 297# 298# @host: The hostname the SPICE server is bound to. This depends on 299# the name resolution on the host and may be an IP address. 300# 301# @port: The SPICE server's port number. 302# 303# @compiled-version: SPICE server version. 304# 305# @tls-port: The SPICE server's TLS port number. 306# 307# @auth: the current authentication type used by the server 308# 309# - 'none' if no authentication is being used 310# - 'spice' uses SASL or direct TLS authentication, depending on 311# command line options 312# 313# @mouse-mode: The mode in which the mouse cursor is displayed 314# currently. Can be determined by the client or the server, or 315# unknown if spice server doesn't provide this information. 316# (since: 1.1) 317# 318# @channels: a list of @SpiceChannel for each active spice channel 319# 320# Since: 0.14 321## 322{ 'struct': 'SpiceInfo', 323 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', 324 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', 325 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']}, 326 'if': 'CONFIG_SPICE' } 327 328## 329# @query-spice: 330# 331# Returns information about the current SPICE server 332# 333# Returns: @SpiceInfo 334# 335# Since: 0.14 336# 337# Example: 338# 339# -> { "execute": "query-spice" } 340# <- { "return": { 341# "enabled": true, 342# "auth": "spice", 343# "port": 5920, 344# "migrated":false, 345# "tls-port": 5921, 346# "host": "0.0.0.0", 347# "mouse-mode":"client", 348# "channels": [ 349# { 350# "port": "54924", 351# "family": "ipv4", 352# "channel-type": 1, 353# "connection-id": 1804289383, 354# "host": "127.0.0.1", 355# "channel-id": 0, 356# "tls": true 357# }, 358# { 359# "port": "36710", 360# "family": "ipv4", 361# "channel-type": 4, 362# "connection-id": 1804289383, 363# "host": "127.0.0.1", 364# "channel-id": 0, 365# "tls": false 366# }, 367# [ ... more channels follow ... ] 368# ] 369# } 370# } 371## 372{ 'command': 'query-spice', 'returns': 'SpiceInfo', 373 'if': 'CONFIG_SPICE' } 374 375## 376# @SPICE_CONNECTED: 377# 378# Emitted when a SPICE client establishes a connection 379# 380# @server: server information 381# 382# @client: client information 383# 384# Since: 0.14 385# 386# Example: 387# 388# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 389# "event": "SPICE_CONNECTED", 390# "data": { 391# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 392# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 393# }} 394## 395{ 'event': 'SPICE_CONNECTED', 396 'data': { 'server': 'SpiceBasicInfo', 397 'client': 'SpiceBasicInfo' }, 398 'if': 'CONFIG_SPICE' } 399 400## 401# @SPICE_INITIALIZED: 402# 403# Emitted after initial handshake and authentication takes place (if 404# any) and the SPICE channel is up and running 405# 406# @server: server information 407# 408# @client: client information 409# 410# Since: 0.14 411# 412# Example: 413# 414# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 415# "event": "SPICE_INITIALIZED", 416# "data": {"server": {"auth": "spice", "port": "5921", 417# "family": "ipv4", "host": "127.0.0.1"}, 418# "client": {"port": "49004", "family": "ipv4", "channel-type": 3, 419# "connection-id": 1804289383, "host": "127.0.0.1", 420# "channel-id": 0, "tls": true} 421# }} 422## 423{ 'event': 'SPICE_INITIALIZED', 424 'data': { 'server': 'SpiceServerInfo', 425 'client': 'SpiceChannel' }, 426 'if': 'CONFIG_SPICE' } 427 428## 429# @SPICE_DISCONNECTED: 430# 431# Emitted when the SPICE connection is closed 432# 433# @server: server information 434# 435# @client: client information 436# 437# Since: 0.14 438# 439# Example: 440# 441# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707}, 442# "event": "SPICE_DISCONNECTED", 443# "data": { 444# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"}, 445# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"} 446# }} 447## 448{ 'event': 'SPICE_DISCONNECTED', 449 'data': { 'server': 'SpiceBasicInfo', 450 'client': 'SpiceBasicInfo' }, 451 'if': 'CONFIG_SPICE' } 452 453## 454# @SPICE_MIGRATE_COMPLETED: 455# 456# Emitted when SPICE migration has completed 457# 458# Since: 1.3 459# 460# Example: 461# 462# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172}, 463# "event": "SPICE_MIGRATE_COMPLETED" } 464## 465{ 'event': 'SPICE_MIGRATE_COMPLETED', 466 'if': 'CONFIG_SPICE' } 467 468## 469# == VNC 470## 471 472## 473# @VncBasicInfo: 474# 475# The basic information for vnc network connection 476# 477# @host: IP address 478# 479# @service: The service name of the vnc port. This may depend on the 480# host system's service database so symbolic names should not be 481# relied on. 482# 483# @family: address family 484# 485# @websocket: true in case the socket is a websocket (since 2.3). 486# 487# Since: 2.1 488## 489{ 'struct': 'VncBasicInfo', 490 'data': { 'host': 'str', 491 'service': 'str', 492 'family': 'NetworkAddressFamily', 493 'websocket': 'bool' }, 494 'if': 'CONFIG_VNC' } 495 496## 497# @VncServerInfo: 498# 499# The network connection information for server 500# 501# @auth: authentication method used for the plain (non-websocket) VNC 502# server 503# 504# Since: 2.1 505## 506{ 'struct': 'VncServerInfo', 507 'base': 'VncBasicInfo', 508 'data': { '*auth': 'str' }, 509 'if': 'CONFIG_VNC' } 510 511## 512# @VncClientInfo: 513# 514# Information about a connected VNC client. 515# 516# @x509_dname: If x509 authentication is in use, the Distinguished 517# Name of the client. 518# 519# @sasl_username: If SASL authentication is in use, the SASL username 520# used for authentication. 521# 522# Since: 0.14 523## 524{ 'struct': 'VncClientInfo', 525 'base': 'VncBasicInfo', 526 'data': { '*x509_dname': 'str', '*sasl_username': 'str' }, 527 'if': 'CONFIG_VNC' } 528 529## 530# @VncInfo: 531# 532# Information about the VNC session. 533# 534# @enabled: true if the VNC server is enabled, false otherwise 535# 536# @host: The hostname the VNC server is bound to. This depends on the 537# name resolution on the host and may be an IP address. 538# 539# @family: 540# - 'ipv6' if the host is listening for IPv6 connections 541# - 'ipv4' if the host is listening for IPv4 connections 542# - 'unix' if the host is listening on a unix domain socket 543# - 'unknown' otherwise 544# 545# @service: The service name of the server's port. This may depends 546# on the host system's service database so symbolic names should 547# not be relied on. 548# 549# @auth: the current authentication type used by the server 550# 551# - 'none' if no authentication is being used 552# - 'vnc' if VNC authentication is being used 553# - 'vencrypt+plain' if VEncrypt is used with plain text 554# authentication 555# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no 556# authentication 557# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC 558# authentication 559# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain 560# text auth 561# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth 562# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth 563# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain 564# text auth 565# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth 566# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL 567# auth 568# 569# @clients: a list of @VncClientInfo of all currently connected 570# clients 571# 572# Since: 0.14 573## 574{ 'struct': 'VncInfo', 575 'data': {'enabled': 'bool', '*host': 'str', 576 '*family': 'NetworkAddressFamily', 577 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']}, 578 'if': 'CONFIG_VNC' } 579 580## 581# @VncPrimaryAuth: 582# 583# vnc primary authentication method. 584# 585# Since: 2.3 586## 587{ 'enum': 'VncPrimaryAuth', 588 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra', 589 'tls', 'vencrypt', 'sasl' ], 590 'if': 'CONFIG_VNC' } 591 592## 593# @VncVencryptSubAuth: 594# 595# vnc sub authentication method with vencrypt. 596# 597# Since: 2.3 598## 599{ 'enum': 'VncVencryptSubAuth', 600 'data': [ 'plain', 601 'tls-none', 'x509-none', 602 'tls-vnc', 'x509-vnc', 603 'tls-plain', 'x509-plain', 604 'tls-sasl', 'x509-sasl' ], 605 'if': 'CONFIG_VNC' } 606 607## 608# @VncServerInfo2: 609# 610# The network connection information for server 611# 612# @auth: The current authentication type used by the servers 613# 614# @vencrypt: The vencrypt sub authentication type used by the servers, 615# only specified in case auth == vencrypt. 616# 617# Since: 2.9 618## 619{ 'struct': 'VncServerInfo2', 620 'base': 'VncBasicInfo', 621 'data': { 'auth' : 'VncPrimaryAuth', 622 '*vencrypt' : 'VncVencryptSubAuth' }, 623 'if': 'CONFIG_VNC' } 624 625## 626# @VncInfo2: 627# 628# Information about a vnc server 629# 630# @id: vnc server name. 631# 632# @server: A list of @VncBasincInfo describing all listening sockets. 633# The list can be empty (in case the vnc server is disabled). It 634# also may have multiple entries: normal + websocket, possibly 635# also ipv4 + ipv6 in the future. 636# 637# @clients: A list of @VncClientInfo of all currently connected 638# clients. The list can be empty, for obvious reasons. 639# 640# @auth: The current authentication type used by the non-websockets 641# servers 642# 643# @vencrypt: The vencrypt authentication type used by the servers, 644# only specified in case auth == vencrypt. 645# 646# @display: The display device the vnc server is linked to. 647# 648# Since: 2.3 649## 650{ 'struct': 'VncInfo2', 651 'data': { 'id' : 'str', 652 'server' : ['VncServerInfo2'], 653 'clients' : ['VncClientInfo'], 654 'auth' : 'VncPrimaryAuth', 655 '*vencrypt' : 'VncVencryptSubAuth', 656 '*display' : 'str' }, 657 'if': 'CONFIG_VNC' } 658 659## 660# @query-vnc: 661# 662# Returns information about the current VNC server 663# 664# Returns: @VncInfo 665# 666# Since: 0.14 667# 668# Example: 669# 670# -> { "execute": "query-vnc" } 671# <- { "return": { 672# "enabled":true, 673# "host":"0.0.0.0", 674# "service":"50402", 675# "auth":"vnc", 676# "family":"ipv4", 677# "clients":[ 678# { 679# "host":"127.0.0.1", 680# "service":"50401", 681# "family":"ipv4", 682# "websocket":false 683# } 684# ] 685# } 686# } 687## 688{ 'command': 'query-vnc', 'returns': 'VncInfo', 689 'if': 'CONFIG_VNC' } 690## 691# @query-vnc-servers: 692# 693# Returns a list of vnc servers. The list can be empty. 694# 695# Returns: a list of @VncInfo2 696# 697# Since: 2.3 698## 699{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'], 700 'if': 'CONFIG_VNC' } 701 702## 703# @change-vnc-password: 704# 705# Change the VNC server password. 706# 707# @password: the new password to use with VNC authentication 708# 709# Since: 1.1 710# 711# Notes: An empty password in this command will set the password to 712# the empty string. Existing clients are unaffected by executing 713# this command. 714## 715{ 'command': 'change-vnc-password', 716 'data': { 'password': 'str' }, 717 'if': 'CONFIG_VNC' } 718 719## 720# @VNC_CONNECTED: 721# 722# Emitted when a VNC client establishes a connection 723# 724# @server: server information 725# 726# @client: client information 727# 728# Note: This event is emitted before any authentication takes place, 729# thus the authentication ID is not provided 730# 731# Since: 0.13 732# 733# Example: 734# 735# <- { "event": "VNC_CONNECTED", 736# "data": { 737# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 738# "service": "5901", "host": "0.0.0.0" }, 739# "client": { "family": "ipv4", "service": "58425", 740# "host": "127.0.0.1", "websocket": false } }, 741# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 742## 743{ 'event': 'VNC_CONNECTED', 744 'data': { 'server': 'VncServerInfo', 745 'client': 'VncBasicInfo' }, 746 'if': 'CONFIG_VNC' } 747 748## 749# @VNC_INITIALIZED: 750# 751# Emitted after authentication takes place (if any) and the VNC 752# session is made active 753# 754# @server: server information 755# 756# @client: client information 757# 758# Since: 0.13 759# 760# Example: 761# 762# <- { "event": "VNC_INITIALIZED", 763# "data": { 764# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 765# "service": "5901", "host": "0.0.0.0"}, 766# "client": { "family": "ipv4", "service": "46089", "websocket": false, 767# "host": "127.0.0.1", "sasl_username": "luiz" } }, 768# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } } 769## 770{ 'event': 'VNC_INITIALIZED', 771 'data': { 'server': 'VncServerInfo', 772 'client': 'VncClientInfo' }, 773 'if': 'CONFIG_VNC' } 774 775## 776# @VNC_DISCONNECTED: 777# 778# Emitted when the connection is closed 779# 780# @server: server information 781# 782# @client: client information 783# 784# Since: 0.13 785# 786# Example: 787# 788# <- { "event": "VNC_DISCONNECTED", 789# "data": { 790# "server": { "auth": "sasl", "family": "ipv4", "websocket": false, 791# "service": "5901", "host": "0.0.0.0" }, 792# "client": { "family": "ipv4", "service": "58425", "websocket": false, 793# "host": "127.0.0.1", "sasl_username": "luiz" } }, 794# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } } 795## 796{ 'event': 'VNC_DISCONNECTED', 797 'data': { 'server': 'VncServerInfo', 798 'client': 'VncClientInfo' }, 799 'if': 'CONFIG_VNC' } 800 801## 802# = Input 803## 804 805## 806# @MouseInfo: 807# 808# Information about a mouse device. 809# 810# @name: the name of the mouse device 811# 812# @index: the index of the mouse device 813# 814# @current: true if this device is currently receiving mouse events 815# 816# @absolute: true if this device supports absolute coordinates as 817# input 818# 819# Since: 0.14 820## 821{ 'struct': 'MouseInfo', 822 'data': {'name': 'str', 'index': 'int', 'current': 'bool', 823 'absolute': 'bool'} } 824 825## 826# @query-mice: 827# 828# Returns information about each active mouse device 829# 830# Returns: a list of @MouseInfo for each device 831# 832# Since: 0.14 833# 834# Example: 835# 836# -> { "execute": "query-mice" } 837# <- { "return": [ 838# { 839# "name":"QEMU Microsoft Mouse", 840# "index":0, 841# "current":false, 842# "absolute":false 843# }, 844# { 845# "name":"QEMU PS/2 Mouse", 846# "index":1, 847# "current":true, 848# "absolute":true 849# } 850# ] 851# } 852## 853{ 'command': 'query-mice', 'returns': ['MouseInfo'] } 854 855## 856# @QKeyCode: 857# 858# An enumeration of key name. 859# 860# This is used by the @send-key command. 861# 862# @unmapped: since 2.0 863# 864# @pause: since 2.0 865# 866# @ro: since 2.4 867# 868# @kp_comma: since 2.4 869# 870# @kp_equals: since 2.6 871# 872# @power: since 2.6 873# 874# @hiragana: since 2.9 875# 876# @henkan: since 2.9 877# 878# @yen: since 2.9 879# 880# @sleep: since 2.10 881# 882# @wake: since 2.10 883# 884# @audionext: since 2.10 885# 886# @audioprev: since 2.10 887# 888# @audiostop: since 2.10 889# 890# @audioplay: since 2.10 891# 892# @audiomute: since 2.10 893# 894# @volumeup: since 2.10 895# 896# @volumedown: since 2.10 897# 898# @mediaselect: since 2.10 899# 900# @mail: since 2.10 901# 902# @calculator: since 2.10 903# 904# @computer: since 2.10 905# 906# @ac_home: since 2.10 907# 908# @ac_back: since 2.10 909# 910# @ac_forward: since 2.10 911# 912# @ac_refresh: since 2.10 913# 914# @ac_bookmarks: since 2.10 915# 916# @muhenkan: since 2.12 917# 918# @katakanahiragana: since 2.12 919# 920# @lang1: since 6.1 921# 922# @lang2: since 6.1 923# 924# @f13: since 8.0 925# 926# @f14: since 8.0 927# 928# @f15: since 8.0 929# 930# @f16: since 8.0 931# 932# @f17: since 8.0 933# 934# @f18: since 8.0 935# 936# @f19: since 8.0 937# 938# @f20: since 8.0 939# 940# @f21: since 8.0 941# 942# @f22: since 8.0 943# 944# @f23: since 8.0 945# 946# @f24: since 8.0 947# 948# 'sysrq' was mistakenly added to hack around the fact that the ps2 949# driver was not generating correct scancodes sequences when 950# 'alt+print' was pressed. This flaw is now fixed and the 'sysrq' key 951# serves no further purpose. Any further use of 'sysrq' will be 952# transparently changed to 'print', so they are effectively synonyms. 953# 954# Since: 1.3 955## 956{ 'enum': 'QKeyCode', 957 'data': [ 'unmapped', 958 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl', 959 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', 960 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', 961 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', 962 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', 963 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', 964 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', 965 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', 966 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', 967 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', 968 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', 969 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', 970 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', 971 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', 972 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause', 973 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana', 974 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake', 975 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute', 976 'volumeup', 'volumedown', 'mediaselect', 977 'mail', 'calculator', 'computer', 978 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks', 979 'lang1', 'lang2','f13','f14','f15','f16','f17','f18','f19','f20','f21','f22','f23','f24' ] } 980 981## 982# @KeyValueKind: 983# 984# Since: 1.3 985## 986{ 'enum': 'KeyValueKind', 987 'data': [ 'number', 'qcode' ] } 988 989## 990# @IntWrapper: 991# 992# Since: 1.3 993## 994{ 'struct': 'IntWrapper', 995 'data': { 'data': 'int' } } 996 997## 998# @QKeyCodeWrapper: 999# 1000# Since: 1.3 1001## 1002{ 'struct': 'QKeyCodeWrapper', 1003 'data': { 'data': 'QKeyCode' } } 1004 1005## 1006# @KeyValue: 1007# 1008# Represents a keyboard key. 1009# 1010# Since: 1.3 1011## 1012{ 'union': 'KeyValue', 1013 'base': { 'type': 'KeyValueKind' }, 1014 'discriminator': 'type', 1015 'data': { 1016 'number': 'IntWrapper', 1017 'qcode': 'QKeyCodeWrapper' } } 1018 1019## 1020# @send-key: 1021# 1022# Send keys to guest. 1023# 1024# @keys: An array of @KeyValue elements. All @KeyValues in this array 1025# are simultaneously sent to the guest. A @KeyValue.number value 1026# is sent directly to the guest, while @KeyValue.qcode must be a 1027# valid @QKeyCode value 1028# 1029# @hold-time: time to delay key up events, milliseconds. Defaults to 1030# 100 1031# 1032# Returns: 1033# - Nothing on success 1034# - If key is unknown or redundant, GenericError 1035# 1036# Since: 1.3 1037# 1038# Example: 1039# 1040# -> { "execute": "send-key", 1041# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" }, 1042# { "type": "qcode", "data": "alt" }, 1043# { "type": "qcode", "data": "delete" } ] } } 1044# <- { "return": {} } 1045## 1046{ 'command': 'send-key', 1047 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } 1048 1049## 1050# @InputButton: 1051# 1052# Button of a pointer input device (mouse, tablet). 1053# 1054# @side: front side button of a 5-button mouse (since 2.9) 1055# 1056# @extra: rear side button of a 5-button mouse (since 2.9) 1057# 1058# @touch: screen contact on a multi-touch device (since 8.1) 1059# 1060# Since: 2.0 1061## 1062{ 'enum' : 'InputButton', 1063 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side', 1064 'extra', 'wheel-left', 'wheel-right', 'touch' ] } 1065 1066## 1067# @InputAxis: 1068# 1069# Position axis of a pointer input device (mouse, tablet). 1070# 1071# Since: 2.0 1072## 1073{ 'enum' : 'InputAxis', 1074 'data' : [ 'x', 'y' ] } 1075 1076## 1077# @InputMultiTouchType: 1078# 1079# Type of a multi-touch event. 1080# 1081# Since: 8.1 1082## 1083{ 'enum' : 'InputMultiTouchType', 1084 'data' : [ 'begin', 'update', 'end', 'cancel', 'data' ] } 1085 1086 1087## 1088# @InputKeyEvent: 1089# 1090# Keyboard input event. 1091# 1092# @key: Which key this event is for. 1093# 1094# @down: True for key-down and false for key-up events. 1095# 1096# Since: 2.0 1097## 1098{ 'struct' : 'InputKeyEvent', 1099 'data' : { 'key' : 'KeyValue', 1100 'down' : 'bool' } } 1101 1102## 1103# @InputBtnEvent: 1104# 1105# Pointer button input event. 1106# 1107# @button: Which button this event is for. 1108# 1109# @down: True for key-down and false for key-up events. 1110# 1111# Since: 2.0 1112## 1113{ 'struct' : 'InputBtnEvent', 1114 'data' : { 'button' : 'InputButton', 1115 'down' : 'bool' } } 1116 1117## 1118# @InputMoveEvent: 1119# 1120# Pointer motion input event. 1121# 1122# @axis: Which axis is referenced by @value. 1123# 1124# @value: Pointer position. For absolute coordinates the valid range 1125# is 0 -> 0x7ffff 1126# 1127# Since: 2.0 1128## 1129{ 'struct' : 'InputMoveEvent', 1130 'data' : { 'axis' : 'InputAxis', 1131 'value' : 'int' } } 1132 1133## 1134# @InputMultiTouchEvent: 1135# 1136# MultiTouch input event. 1137# 1138# @slot: Which slot has generated the event. 1139# 1140# @tracking-id: ID to correlate this event with previously generated 1141# events. 1142# 1143# @axis: Which axis is referenced by @value. 1144# 1145# @value: Contact position. 1146# 1147# Since: 8.1 1148## 1149{ 'struct' : 'InputMultiTouchEvent', 1150 'data' : { 'type' : 'InputMultiTouchType', 1151 'slot' : 'int', 1152 'tracking-id': 'int', 1153 'axis' : 'InputAxis', 1154 'value' : 'int' } } 1155 1156## 1157# @InputEventKind: 1158# 1159# @key: a keyboard input event 1160# 1161# @btn: a pointer button input event 1162# 1163# @rel: a relative pointer motion input event 1164# 1165# @abs: an absolute pointer motion input event 1166# 1167# @mtt: a multi-touch input event 1168# 1169# Since: 2.0 1170## 1171{ 'enum': 'InputEventKind', 1172 'data': [ 'key', 'btn', 'rel', 'abs', 'mtt' ] } 1173 1174## 1175# @InputKeyEventWrapper: 1176# 1177# Since: 2.0 1178## 1179{ 'struct': 'InputKeyEventWrapper', 1180 'data': { 'data': 'InputKeyEvent' } } 1181 1182## 1183# @InputBtnEventWrapper: 1184# 1185# Since: 2.0 1186## 1187{ 'struct': 'InputBtnEventWrapper', 1188 'data': { 'data': 'InputBtnEvent' } } 1189 1190## 1191# @InputMoveEventWrapper: 1192# 1193# Since: 2.0 1194## 1195{ 'struct': 'InputMoveEventWrapper', 1196 'data': { 'data': 'InputMoveEvent' } } 1197 1198## 1199# @InputMultiTouchEventWrapper: 1200# 1201# Since: 8.1 1202## 1203{ 'struct': 'InputMultiTouchEventWrapper', 1204 'data': { 'data': 'InputMultiTouchEvent' } } 1205 1206## 1207# @InputEvent: 1208# 1209# Input event union. 1210# 1211# @type: the type of input event 1212# 1213# Since: 2.0 1214## 1215{ 'union' : 'InputEvent', 1216 'base': { 'type': 'InputEventKind' }, 1217 'discriminator': 'type', 1218 'data' : { 'key' : 'InputKeyEventWrapper', 1219 'btn' : 'InputBtnEventWrapper', 1220 'rel' : 'InputMoveEventWrapper', 1221 'abs' : 'InputMoveEventWrapper', 1222 'mtt' : 'InputMultiTouchEventWrapper' } } 1223 1224## 1225# @input-send-event: 1226# 1227# Send input event(s) to guest. 1228# 1229# The @device and @head parameters can be used to send the input event 1230# to specific input devices in case (a) multiple input devices of the 1231# same kind are added to the virtual machine and (b) you have 1232# configured input routing (see docs/multiseat.txt) for those input 1233# devices. The parameters work exactly like the device and head 1234# properties of input devices. If @device is missing, only devices 1235# that have no input routing config are admissible. If @device is 1236# specified, both input devices with and without input routing config 1237# are admissible, but devices with input routing config take 1238# precedence. 1239# 1240# @device: display device to send event(s) to. 1241# 1242# @head: head to send event(s) to, in case the display device supports 1243# multiple scanouts. 1244# 1245# @events: List of InputEvent union. 1246# 1247# Returns: Nothing on success. 1248# 1249# Since: 2.6 1250# 1251# Note: The consoles are visible in the qom tree, under 1252# /backend/console[$index]. They have a device link and head 1253# property, so it is possible to map which console belongs to 1254# which device and display. 1255# 1256# Examples: 1257# 1258# 1. Press left mouse button. 1259# 1260# -> { "execute": "input-send-event", 1261# "arguments": { "device": "video0", 1262# "events": [ { "type": "btn", 1263# "data" : { "down": true, "button": "left" } } ] } } 1264# <- { "return": {} } 1265# 1266# -> { "execute": "input-send-event", 1267# "arguments": { "device": "video0", 1268# "events": [ { "type": "btn", 1269# "data" : { "down": false, "button": "left" } } ] } } 1270# <- { "return": {} } 1271# 1272# 2. Press ctrl-alt-del. 1273# 1274# -> { "execute": "input-send-event", 1275# "arguments": { "events": [ 1276# { "type": "key", "data" : { "down": true, 1277# "key": {"type": "qcode", "data": "ctrl" } } }, 1278# { "type": "key", "data" : { "down": true, 1279# "key": {"type": "qcode", "data": "alt" } } }, 1280# { "type": "key", "data" : { "down": true, 1281# "key": {"type": "qcode", "data": "delete" } } } ] } } 1282# <- { "return": {} } 1283# 1284# 3. Move mouse pointer to absolute coordinates (20000, 400). 1285# 1286# -> { "execute": "input-send-event" , 1287# "arguments": { "events": [ 1288# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } }, 1289# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } } 1290# <- { "return": {} } 1291## 1292{ 'command': 'input-send-event', 1293 'data': { '*device': 'str', 1294 '*head' : 'int', 1295 'events' : [ 'InputEvent' ] } } 1296 1297## 1298# @DisplayGTK: 1299# 1300# GTK display options. 1301# 1302# @grab-on-hover: Grab keyboard input on mouse hover. 1303# 1304# @zoom-to-fit: Zoom guest display to fit into the host window. When 1305# turned off the host window will be resized instead. In case the 1306# display device can notify the guest on window resizes 1307# (virtio-gpu) this will default to "on", assuming the guest will 1308# resize the display to match the window size then. Otherwise it 1309# defaults to "off". (Since 3.1) 1310# 1311# @show-tabs: Display the tab bar for switching between the various 1312# graphical interfaces (e.g. VGA and virtual console character 1313# devices) by default. (Since 7.1) 1314# 1315# @show-menubar: Display the main window menubar. Defaults to "on". 1316# (Since 8.0) 1317# 1318# Since: 2.12 1319## 1320{ 'struct' : 'DisplayGTK', 1321 'data' : { '*grab-on-hover' : 'bool', 1322 '*zoom-to-fit' : 'bool', 1323 '*show-tabs' : 'bool', 1324 '*show-menubar' : 'bool' } } 1325 1326## 1327# @DisplayEGLHeadless: 1328# 1329# EGL headless display options. 1330# 1331# @rendernode: Which DRM render node should be used. Default is the 1332# first available node on the host. 1333# 1334# Since: 3.1 1335## 1336{ 'struct' : 'DisplayEGLHeadless', 1337 'data' : { '*rendernode' : 'str' } } 1338 1339## 1340# @DisplayDBus: 1341# 1342# DBus display options. 1343# 1344# @addr: The D-Bus bus address (default to the session bus). 1345# 1346# @rendernode: Which DRM render node should be used. Default is the 1347# first available node on the host. 1348# 1349# @p2p: Whether to use peer-to-peer connections (accepted through 1350# @add_client). 1351# 1352# @audiodev: Use the specified DBus audiodev to export audio. 1353# 1354# Since: 7.0 1355## 1356{ 'struct' : 'DisplayDBus', 1357 'data' : { '*rendernode' : 'str', 1358 '*addr': 'str', 1359 '*p2p': 'bool', 1360 '*audiodev': 'str' } } 1361 1362## 1363# @DisplayGLMode: 1364# 1365# Display OpenGL mode. 1366# 1367# @off: Disable OpenGL (default). 1368# 1369# @on: Use OpenGL, pick context type automatically. Would better be 1370# named 'auto' but is called 'on' for backward compatibility with 1371# bool type. 1372# 1373# @core: Use OpenGL with Core (desktop) Context. 1374# 1375# @es: Use OpenGL with ES (embedded systems) Context. 1376# 1377# Since: 3.0 1378## 1379{ 'enum' : 'DisplayGLMode', 1380 'data' : [ 'off', 'on', 'core', 'es' ] } 1381 1382## 1383# @DisplayCurses: 1384# 1385# Curses display options. 1386# 1387# @charset: Font charset used by guest (default: CP437). 1388# 1389# Since: 4.0 1390## 1391{ 'struct' : 'DisplayCurses', 1392 'data' : { '*charset' : 'str' } } 1393 1394## 1395# @DisplayCocoa: 1396# 1397# Cocoa display options. 1398# 1399# @left-command-key: Enable/disable forwarding of left command key to 1400# guest. Allows command-tab window switching on the host without 1401# sending this key to the guest when "off". Defaults to "on" 1402# 1403# @full-grab: Capture all key presses, including system combos. This 1404# requires accessibility permissions, since it performs a global 1405# grab on key events. (default: off) See 1406# https://support.apple.com/en-in/guide/mac-help/mh32356/mac 1407# 1408# @swap-opt-cmd: Swap the Option and Command keys so that their key 1409# codes match their position on non-Mac keyboards and you can use 1410# Meta/Super and Alt where you expect them. (default: off) 1411# 1412# Since: 7.0 1413## 1414{ 'struct': 'DisplayCocoa', 1415 'data': { 1416 '*left-command-key': 'bool', 1417 '*full-grab': 'bool', 1418 '*swap-opt-cmd': 'bool' 1419 } } 1420 1421## 1422# @HotKeyMod: 1423# 1424# Set of modifier keys that need to be held for shortcut key actions. 1425# 1426# Since: 7.1 1427## 1428{ 'enum' : 'HotKeyMod', 1429 'data' : [ 'lctrl-lalt', 'lshift-lctrl-lalt', 'rctrl' ] } 1430 1431## 1432# @DisplaySDL: 1433# 1434# SDL2 display options. 1435# 1436# @grab-mod: Modifier keys that should be pressed together with the 1437# "G" key to release the mouse grab. 1438# 1439# Since: 7.1 1440## 1441{ 'struct' : 'DisplaySDL', 1442 'data' : { '*grab-mod' : 'HotKeyMod' } } 1443 1444## 1445# @DisplayType: 1446# 1447# Display (user interface) type. 1448# 1449# @default: The default user interface, selecting from the first 1450# available of gtk, sdl, cocoa, and vnc. 1451# 1452# @none: No user interface or video output display. The guest will 1453# still see an emulated graphics card, but its output will not be 1454# displayed to the QEMU user. 1455# 1456# @gtk: The GTK user interface. 1457# 1458# @sdl: The SDL user interface. 1459# 1460# @egl-headless: No user interface, offload GL operations to a local 1461# DRI device. Graphical display need to be paired with VNC or 1462# Spice. (Since 3.1) 1463# 1464# @curses: Display video output via curses. For graphics device 1465# models which support a text mode, QEMU can display this output 1466# using a curses/ncurses interface. Nothing is displayed when the 1467# graphics device is in graphical mode or if the graphics device 1468# does not support a text mode. Generally only the VGA device 1469# models support text mode. 1470# 1471# @cocoa: The Cocoa user interface. 1472# 1473# @spice-app: Set up a Spice server and run the default associated 1474# application to connect to it. The server will redirect the 1475# serial console and QEMU monitors. (Since 4.0) 1476# 1477# @dbus: Start a D-Bus service for the display. (Since 7.0) 1478# 1479# Since: 2.12 1480## 1481{ 'enum' : 'DisplayType', 1482 'data' : [ 1483 { 'name': 'default' }, 1484 { 'name': 'none' }, 1485 { 'name': 'gtk', 'if': 'CONFIG_GTK' }, 1486 { 'name': 'sdl', 'if': 'CONFIG_SDL' }, 1487 { 'name': 'egl-headless', 1488 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } }, 1489 { 'name': 'curses', 'if': 'CONFIG_CURSES' }, 1490 { 'name': 'cocoa', 'if': 'CONFIG_COCOA' }, 1491 { 'name': 'spice-app', 'if': 'CONFIG_SPICE' }, 1492 { 'name': 'dbus', 'if': 'CONFIG_DBUS_DISPLAY' } 1493 ] 1494} 1495 1496## 1497# @DisplayOptions: 1498# 1499# Display (user interface) options. 1500# 1501# @type: Which DisplayType qemu should use. 1502# 1503# @full-screen: Start user interface in fullscreen mode 1504# (default: off). 1505# 1506# @window-close: Allow to quit qemu with window close button 1507# (default: on). 1508# 1509# @show-cursor: Force showing the mouse cursor (default: off). 1510# (since: 5.0) 1511# 1512# @gl: Enable OpenGL support (default: off). 1513# 1514# Since: 2.12 1515## 1516{ 'union' : 'DisplayOptions', 1517 'base' : { 'type' : 'DisplayType', 1518 '*full-screen' : 'bool', 1519 '*window-close' : 'bool', 1520 '*show-cursor' : 'bool', 1521 '*gl' : 'DisplayGLMode' }, 1522 'discriminator' : 'type', 1523 'data' : { 1524 'gtk': { 'type': 'DisplayGTK', 'if': 'CONFIG_GTK' }, 1525 'cocoa': { 'type': 'DisplayCocoa', 'if': 'CONFIG_COCOA' }, 1526 'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' }, 1527 'egl-headless': { 'type': 'DisplayEGLHeadless', 1528 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } }, 1529 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }, 1530 'sdl': { 'type': 'DisplaySDL', 'if': 'CONFIG_SDL' } 1531 } 1532} 1533 1534## 1535# @query-display-options: 1536# 1537# Returns information about display configuration 1538# 1539# Returns: @DisplayOptions 1540# 1541# Since: 3.1 1542## 1543{ 'command': 'query-display-options', 1544 'returns': 'DisplayOptions' } 1545 1546## 1547# @DisplayReloadType: 1548# 1549# Available DisplayReload types. 1550# 1551# @vnc: VNC display 1552# 1553# Since: 6.0 1554## 1555{ 'enum': 'DisplayReloadType', 1556 'data': ['vnc'] } 1557 1558## 1559# @DisplayReloadOptionsVNC: 1560# 1561# Specify the VNC reload options. 1562# 1563# @tls-certs: reload tls certs or not. 1564# 1565# Since: 6.0 1566## 1567{ 'struct': 'DisplayReloadOptionsVNC', 1568 'data': { '*tls-certs': 'bool' } } 1569 1570## 1571# @DisplayReloadOptions: 1572# 1573# Options of the display configuration reload. 1574# 1575# @type: Specify the display type. 1576# 1577# Since: 6.0 1578## 1579{ 'union': 'DisplayReloadOptions', 1580 'base': {'type': 'DisplayReloadType'}, 1581 'discriminator': 'type', 1582 'data': { 'vnc': 'DisplayReloadOptionsVNC' } } 1583 1584## 1585# @display-reload: 1586# 1587# Reload display configuration. 1588# 1589# Returns: Nothing on success. 1590# 1591# Since: 6.0 1592# 1593# Example: 1594# 1595# -> { "execute": "display-reload", 1596# "arguments": { "type": "vnc", "tls-certs": true } } 1597# <- { "return": {} } 1598## 1599{ 'command': 'display-reload', 1600 'data': 'DisplayReloadOptions', 1601 'boxed' : true } 1602 1603## 1604# @DisplayUpdateType: 1605# 1606# Available DisplayUpdate types. 1607# 1608# @vnc: VNC display 1609# 1610# Since: 7.1 1611## 1612{ 'enum': 'DisplayUpdateType', 1613 'data': ['vnc'] } 1614 1615## 1616# @DisplayUpdateOptionsVNC: 1617# 1618# Specify the VNC reload options. 1619# 1620# @addresses: If specified, change set of addresses to listen for 1621# connections. Addresses configured for websockets are not 1622# touched. 1623# 1624# Since: 7.1 1625## 1626{ 'struct': 'DisplayUpdateOptionsVNC', 1627 'data': { '*addresses': ['SocketAddress'] } } 1628 1629## 1630# @DisplayUpdateOptions: 1631# 1632# Options of the display configuration reload. 1633# 1634# @type: Specify the display type. 1635# 1636# Since: 7.1 1637## 1638{ 'union': 'DisplayUpdateOptions', 1639 'base': {'type': 'DisplayUpdateType'}, 1640 'discriminator': 'type', 1641 'data': { 'vnc': 'DisplayUpdateOptionsVNC' } } 1642 1643## 1644# @display-update: 1645# 1646# Update display configuration. 1647# 1648# Returns: Nothing on success. 1649# 1650# Since: 7.1 1651# 1652# Example: 1653# 1654# -> { "execute": "display-update", 1655# "arguments": { "type": "vnc", "addresses": 1656# [ { "type": "inet", "host": "0.0.0.0", 1657# "port": "5901" } ] } } 1658# <- { "return": {} } 1659## 1660{ 'command': 'display-update', 1661 'data': 'DisplayUpdateOptions', 1662 'boxed' : true } 1663 1664## 1665# @client_migrate_info: 1666# 1667# Set migration information for remote display. This makes the server 1668# ask the client to automatically reconnect using the new parameters 1669# once migration finished successfully. Only implemented for SPICE. 1670# 1671# @protocol: must be "spice" 1672# 1673# @hostname: migration target hostname 1674# 1675# @port: spice tcp port for plaintext channels 1676# 1677# @tls-port: spice tcp port for tls-secured channels 1678# 1679# @cert-subject: server certificate subject 1680# 1681# Since: 0.14 1682# 1683# Example: 1684# 1685# -> { "execute": "client_migrate_info", 1686# "arguments": { "protocol": "spice", 1687# "hostname": "virt42.lab.kraxel.org", 1688# "port": 1234 } } 1689# <- { "return": {} } 1690## 1691{ 'command': 'client_migrate_info', 1692 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int', 1693 '*tls-port': 'int', '*cert-subject': 'str' } } 1694